* Blue Coat device updates
* Blue Coat device updates
* Updated PHP code per @laf comments
* YAML update for Packetshaper
* SSL Visibility YAML and snmprec file
* Cleanup problematic MIB files which should not have been there
* Reset Packetshaper YAML to original
* Added json test data
* Add support for Allied Telesis AlliedWare Plus products
- Uses mibs from 5.4.7-2.1 for AlliedWare Plus products
- Updates Legacy AlliedWare mibs
- Added Allied Telesis svg
* Remove unnecessary "trim" from snmpget
* Add new line to end of file
* Minor fixes for commit
* awplus: initial ntp commit
This isn't completely working, however initial patch of it partially working
* awplus: Add NTP support
- Fixed polling issues for awplus. Now offset and delay graphs work.
- html/includes/graphs/device/ntp_*.inc.php
-- Removed extra "\" from MAX count which showed up in Graph legend
- html/includes/graphs/device/ntp_delay.inc.php
-- Present legend in either seconds, or milliseconds (depending on vendor)
- html/includes/graphs/device/ntp_dispersion.inc.php
-- Present legend in either seconds, or milliseconds (depending on vendor)
- html/includes/graphs/device/ntp_offset.inc.php
-- Removed rrd minimum (-l 0). This is because offset can be below 0.
--- It's better for the graph to auto scale than set a fixed minimum to display here.
- html/includes/graphs/device/ntp_stratum.inc.php
-- Changed graph to go from 0 to max of 16. NTP Stratum can only be 0 to 16.
* awplus: Add NTP test data
* updated awplus ntp poller
* device: awplus convert NTP poller into seconds
* device: fix NTP graph formatting
* device: Improve NTP formatting
* device: unset awplus NTP variable
* fix formatting
* device: awplus change NTP from numerical OIDs to named
* device: update awplus ntp json tests
* device: fix cisco and awplus ntp database creation
* device: update awplus json
* First basic support for graphing openbsd pf states
* Now openbsd pf state graphing actually works
* First basic support for graphing openbsd pf states
* Now openbsd pf state graphing actually works
* Wrong graph types for searches, removals and inserts
* Removed unused file "openbsd_pfstates.inc.php"
* Remove openbsd from filenames, make it more generic
* initial
* commited correct version of f5-ltm-inc.php
* cleaned up comments
* cleaned up formating for travis
* split GTM discovery from LTM discovery module
* removed blank line at EOF
* updated per comments
* Added check_load.inc.php.
* Combined load graphs. Removed extra backslashes from all graphs. Escaped backslash in mysql file.
* Added a note about local only service checks to the docs.
* Added CheckPoint SecurePlatform support
* Changed some issues
* Changed some issues
* Update splat.yaml
* Changed os name to secureplatform intead of splat
* Changed os name to secureplatform
* Changed some issues
* Junos dwdm interface sensor support …
four new sensors
Chromatic Dispersion ps/nm
Delay s (seconds)
Q_factor (dB)
preFEC_BER (ratio)
reuse of
SNR, dbm, temperature, current
* new dwdm sensors more generic, ber and quality_factor
* new sensors updated
* renamed html graphs new sensors
* fixed ber polling
* Change to base SI Hz and s.
* update sensor divisors to bigint
* rename sql-schema/216.sql to 218.sql
* YAML junos dwmd sensor definitions, except BER
* bigint divisor fixed
* deafult 1 divisior
* small fixes including schema change for another PR
* schema fix
* Inital cambium refactor
* Refactored tests
* Remove CMM from pmp group
* Add sensors / Give CMM individual OS
* Fix linting
* More Sensors / states and Revised Headers
* Added old graphs / more sensors
* Add modulation rate to sensor
* Fix Hardware detection bug
* Further hardware detection refinments
* Modify pmp hardware detection
* New Wireless Metric - SSR
* SSR Sensor Graph
* Migrate SSR to metric
* Added last metric file
* Add master check to isAp method
* Fix variables in epmp
* CMM Discovery and state addition
* Add another test for cmm
* refactor: remove duplicated data collection in old wifi module
Still a bit more work before we can fully remove it
* remove unused graphs
update overview graphs for some wireless os
Graphs that were using `file_exists()` to check for the presence of RRD
files now use `rrdtool_check_rrd_exists()` instead. This is a fix for
distributed poller configurations that are running `rrdcached` on a
different host.
* newdevice: Add connected AP count for Cisco WLCs
Adds ap-count wireless sensor type
fixes: #4295
* better detection
Update the overview graph to the new one
* feature: Wireless Sensors
Includes client counts for ios and unifi
Graphing could use some improvement.
Alerting and threshold ui not implemented
WIP: starting OO based wireless sensors.
Class based functionality working
remove old functional files
add schema file
discovery needs to be enabled, not polling
fix up schema
fix Unifi discovery not returning an array
Add some debug when discovering a sensor.
Fix style.
Add missing semicolin
Add a null object (Generic) for OS.
Fill out some phpdocs
Re-organized code
Each sensor type now has it's own discovery and polling interface
Custom polling tested with Unifi CCQ
Left to do:
Implement UI (Graphs and Custom thresholds)
Alerting
Testing
Fix event message text
Remove runDiscovery and runPolling from OS, they are unused and don't belong there.
Cleanups/docs
Missed this file.
Remove the requirement to fetch the current value to check validity.
Do that automatically if current is not specified
A few cleanups here and there
First pass at graphing.
device_ and wireless_ graphs added.
Add RouterOS support
Singleton OS instance isn't required right now.
Remove that to allow some memory to be freed.
Add wireless to the device list metrics.
Make all metrics clickable
Tweak graphs a bit
Implement limit configuration page.
Use sensors page as common code instead of duplicating.
Clean up some javascript interactions: Allow enter on values to save. Cancel if update is not needed. Enable the clear custom button after setting a custom value.
Add some wireless alert rules to the library.
Add documentation.
Add unifi client counts by ssid in addition to radio.
Optimize Sensor polling a bit.
Add HP MSM clients support (for full controller)
Fix function accessibility
Formalize the discovery and poller interfaces.
Add Xirrus clients and noise floor
move module interfaces to a more appropriate place.
push caching code up to os, unsure about this do to the limitations
No point in selectively enabling wireless discovery. We only discover if the device supports something.
Add RSSI, Power, and Rate.
Add these sensors for Ubnt Airos.
Clean up some copyrights.
Reduce the amount of files need to add new types.
Leave graph files for consistency and to allow customization.
Remove the old wifi clients graph completely.
ciscowlc should have improved counts (total and per-ssid)
Schema didn't get added.
Impelement the rest of the AirOS sensors
Reformat and re-organize the Airos.php class.
Add several UBNT AirFiber sensors
A few fixes add links to the section headers
Add HP MSM mibs.
* Schema file got dropped in rebase.
* Add wireless menu to view sensors across all devices.
Icons in the menu need help :/
* Add HeliOS, Mimosa, and Siklu support
Sensors added SNR + Noise
* Add power and utilization to Unifi
* Update polling to prefetch all sensor data in a few snmp requests as possible
* Add Extendair: tx+rx power, aggregate rate, frequency
* Add a check for duplicate sensors in discovery. Just print an error for now.
* Add Bit Error Ratio (named error-ratio to allow for bit error rate to be added if needed)
Fix an incorrect link in the wireless sensors table
* Add error rate and change all bps and Hz to use si units
* Fixes to limits and frequency display
* Fix overview graph frequency display
A few decimal place tweaks
* Don't allow switching sensor and wireless-sensor graphs, it doesn't work.
Change individual distance graphs to use si units
* Go through the OS and make sure I got all the sensors I can (probably missed some still)
Because pollWirelessChannelAsFrequency() is generic and a little complex, so pull it up to OS.
Message to help developers adding supports that don't return an array from discover functions.
* Fix some issues
* Remove noise and signal for now at least
A couple more fixes
Add a notification
* Oopsie
* Bonus AirFiber sensors
* refactor: Moved ifLabel -> cleanPort and updated the usage
* added list of tags allowed
* few updates as per comments from @murrant
* Added simple unit tests
* double display for javascript popover
* Remove ifNameDescr() function
Fix realtime port page
* remove accidental temp code
* Remove double display calls in ajax tables
* add single pool based poller for php-fpm
* add the page for php-fpm
* add graph for php-fpm
* I agree to the conditions of the Contributor Agreement contained in doc/General/Contributing.md.
* use named OID as suggest by @laf
* document PHP-FPM monitoring
* link it in the index
* clean up the named oid
* add how to grab the script in question
* add f2b poller
* add f2b app page
* add f2b graph
* add fail2ban notes
* minor formatting cleanup
* ...more formatting cleanup
* rename it so it can be called via the app page
* Revert "rename it so it can be called via the app page"
This reverts commit 0bde88a038.
* *rename it so it can be called via the apps page
*setup the apps page to call it
* renamed the graph
* now include fail2ban in the apps properly
* correct the wget command so it does not stomp on phpfpm-sp
* update the fail2ban poller for the newest fail2ban script and now build multiple RRDs
* update for now graphing firewalled and banned
* update fail2ban docs to match the newest snmpd extend method
* search automatically for jails and graph them
* graphs the currently banned for a fail2ban jail
* change the tital of the graph for the total banned to make it more descriptive
* Add a explanation of the two variables in the total graph.
* misc. white space cleans ups
* misc. white space cleanup
* minor white space cleanup
* correct descr lenght
* correct descr lenght
* Update fail2ban.inc.php
* Use rrd_name properly
* note the cache file bits
* make caching optional and note why
* Update to new RrdDefinition class
* And the use statement ;/
* Messed the second rrd_def
* correct two minor errors that did not seem to be causing issues
* don't use $vars as per pull #5994
* don't use $vars as per pull #5994
* fix jails graphs
* Remove loops and temp variables
* whitespace
* Change graph so we don't get fractions
* add the common nfsen channel include
* add nfsen channel flows graph
* add nfsen channel packet graph
* add nfsen channel traffic graph
* update nfsen for channel support
* the nfsen general page
* add the nfsen channel page
* update the docs on nfsen to be more clear about configuring it
* white space cleanup
* white space cleanup
* misc code cleanup
* now consistently uses all the same quotes
* minor code cleanups
* Update nfsen_channel_common.inc.php
* minor white space cleanup
