* Added WUT 57606,57613,57720
* Added os wut-*
* fixed MIB Names and try to generalize wut
* more general sysObjectID mapping, and mib directory
* Delete WUT-57606-MIB
* Delete WUT-57613-MIB
* Delete WUT-57720-MIB
* Rename wut-57613.snmprec to wut_57613.snmprec
* Rename wut-57720.snmprec to wut_57720.snmprec
* Rename wut-57606.snmprec to wut_57606.snmprec
* Delete wut-57606.yaml
* Delete wut-57720.yaml
* Delete wut-57613.yaml
* Delete wut-57606.yaml
* Delete wut-57720.yaml
* Delete wut-57613.yaml
* Update wut.yaml
* Try to correct the Temperature part
This should work for temperature, according to MIB. Pressure and Humidity are not described in this mibfile, so we cannot poll them.
* change wut.yaml
* Add and fix wut_57720
* after ./scripts/save-test-data.php ?
* Add test data
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
* Migrate ironware sensor discovery from php to yaml.
* More sensors, add grouping.
* dynamic_discovery_get_value() becomes getValueFromData()
* Target a specific index with skip_values.
* Improve Brocade BGP session discovery/polling
This commit allows for the correct discovery of BGP sessions
with 32-bit ASNs, IPv6 neighbors using the BGP4V2-MIB which is
based on draft-ietf-idr-bgp4-mibv2-11 and also polls for IPv4
unicast received routes through the FOUNDRY-SN-BGP4-GROUP-MIB.
Copied most of the code from PR#8877 by @Mikeburke14, cleaned
up the code a little bit to match the normal LibreNMS style,
and fixed bgpPeers_cbgp discovery as well as polling for the
ipv4.unicast neighbors.
Note that older Brocade IronWare firmware versions are known
to have multiple defects relating to the BGP4V2-MIB which
might result in certain missing non-established neighbors.
Related vendor defect numbers:
- DEFECT000633962
-- Symptom: The OID bgp4V2PeerAdminStatus does not return the
correct value
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00g
- DEFECT000583319
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display all the BGP entries
-- Reported: NI 05.6.00
-- Resolved: NI 05.8.00e
- DEFECT000550309
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display the full information
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00c
* Add ironware CER & ICX platform test data.
* Re-add ironware.json compatible with current master branch.
* Fix Air Fiber port stats
Define OS port polling includes in a standard way.
Move Air Fiber code to os port polling include.
* Update snmp data
* fix accidental change
* Some formatting fixes
* should be null
* BUG: From a device page, click Alerts and attempt to ACK or add a Note. Nothing happens because the modals are not on the page.
* This patch corrects pages/device/alert.inc.php to include both modal/alert_notes.inc.php and modal/alert_ack.inc.php
* Added definition and sensors for SIAE Alfoplus80HD
* updated the units for the wireless rate sensor
* Added test data
* regenerated test data as requested by PipoCanaja
* Don't overwrite real port ids with zeros in the FDB
* Remove space to make codeclimate happy
* Provide links to device config view for oxidized config search results
* Use a bootgrid for Oxidized nodes so we can sort, search etc.
* Add a space for codeclimate
* Fixed device SNMP edit form (and better feedback)
* snmp.inc.php: Fix SNMP Edit form (better feedback)
* The feedback for Max Repeaters and Max OIDs is much better. The constant false errors on save have been corrected. The are no longer applicable and muted when SNMP is turned off. Their feedback now clearly shows the user what has been done.
* Rename & relabel $no_checks as $force_save (Force Save) because that's simpler and more clearly defines what the code is doing when you turn it on.
* Reorder the Force Save checkbox to be right above the Save button so it's even more clear what it does. Force Save and Save are the only elements on the form that do *not* have a database setting. They're ephemeral and now grouped as such.
* Embedded comments about the use of === false as tests for setAttrib() and forgetAttrib()
* snmp.inc.php: code climate updates, round 1
* remove blank lines
* refactor duplicate code blocks
* remove join on string
* move print_messages to the bottom of the form
* snmp.inc.php: code climate, round 2
* avoid deeply nested control flow statements (8)
* snmp.inc.php: when to $force_save and $device_isssnmable
* move $force_save outside of if ($snmp_enabled) so it works properly
when snmp is disabled.
* only check isSNMPable() if snmp is enabled
* snmp.inc.php: move $device_snmp_details
* $device_snmp_details are only needed for isSNMPable(), so only call
them within the same contingency
* snmp.inc.php: cleanup & hardening
* add SNMP Settings header (to better mimic Device Settings, etc)
* use Toastr for feedback, rather than print_message & print_error
* after editing, always unset($_POST) and the other variables used for editing
* unless the save is forced, if !$device_issnpable then don't save *anything* in the database and revert *all* previous form settings (some already were being reverted & some weren't)
* more variables were ordered alphabetically, unused variables were and removed
* for snmpver, don't use .toggle(); use .hide() & .show() so the form reverts properly when it fails
* snmp.inc.php: clarify placeholder for max repeaters
* snmp.inc.php: code climate, round 3
* correct blank line found at the end of control structure (2)
* correct space before opening parenthesis of a function call prohibited (3)
* Add bad_ifoperstatus for filtering interfaces having a status for example notPresent
* Add bad_ifoperstatus for filtering interfaces having a status for example notPresent
* Add bad_ifoperstatus for filtering interfaces having a status for example notPresent
* Update nios.yaml
I tried to pull them all in using {{ index }}, but it didn't actually work.....
This adds the DHCP, DNS and NTP service statuses.
* Dynamic service discovery
* typo
* Create nios_status.snmprec
* Create nios_status.json
* Array
* Typo, more
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
* Fix Siklu Voltage
* Update tests
* Another test fix attempt
* Decimals..
* Ok, enough.
* Restore currently used index value and correctly push num_oid
* Update siklu.json
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
* fix SQLSTATE[23000]: Integrity constraint violation: 1048 Column 'port_id' cannot be null
* If $entry['port_id'] truly is null (on insert) then Illuminate throws a fatal error and all subsequent processing stops.
* Cisco ISO (and others) may have null ids. We still want them inserted as new
* strings work with DB::table->insert().
Avoid writing "0" as port id when the data came back incomplete from the snmp poll, and when the existing data in the DB already contains a port. Keep the existing port id instead.
* Add alert rule option to invert map to
* Update 2019_12_17_151314_add_invert_map_to_alert_rules.php
* fix invert map to does not work if several groups are set in map to
* Clarify labels
* fix invert map to at rule creation
* clarify invert label
* Fix device in map to - not group
* dummy commit
* Add version match for newer IOS-XR NCS hardware
* Tested with NCS-5504 and NCS5508
Signed-off-by: Misha Komarovskiy <zombah@gmail.com>
* Add test data for Cisco NCS-5504 and NCS-5508
Signed-off-by: Misha Komarovskiy <zombah@gmail.com>
* Initial push
* power trap tests
* vmware heartbeat trap tests
* heartbeat trap test
* created utilclass for common functions
* Changed util class name to better reflect its use
* make vm power state changes to db
* Traps will modify DB
* Removed unecesarry relationship
* Added vminfo modelfactory, tests, and fixed format
* Added suspended state to ui
* Add alert rule option to invert map to
* Add alert rule option to invert map to
* Update 2019_12_17_151314_add_invert_map_to_alert_rules.php
* fix invert map to does not work if several groups are set in map to
* fix invert map to does not work if several groups are set in map to
* fix invert map to does not work if several groups are set in map to
* Clarify labels
* Clarify labels
* Clarify labels
* Clarify labels
* fix invert map to at rule creation
* clarify invert label
* extend FS switches support
* MIB compilation
* HW and Ver
* sensors and CPU
* tests
* correct version
* try to handle properly "down" as not up, for OperStat like lowerLayerDown
* try to handle properly "down" as not up, for OperStat like lowerLayerDown
* try to handle properly "down" as not up, for OperStat like lowerLayerDown
* try to replace "down" with "not up" :)
* fix other ifOperStatus checks
* Add FDB support for ArubaOS; modify some SNMP calls to allow community string indexing
* Apply coding styles, changed arubaos.inc.php comment headers
* Coding style
* Modify per items discussed at pull 10940
* ArubaOS test data
* ArubaOS header doc
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
* Don't update ports stats in database when their ifOperStatus is down and their ifLastChange did change
* Don't update ports stats in database when their ifOperStatus is down and their ifLastChange did change
* Don't update ports stats in database when their ifOperStatus is down and their ifLastChange did change
* Update the poll_time, poll_prev and poll_period of all ports in an unique request per device
* Update the poll_time, poll_prev and poll_period of all ports in an unique request per device
* echo debug
* max array_column
* remove print_r for debug
* optimize update of poll_time, poll_prev and poll_period
* optimize update of poll_time, poll_prev and poll_period
* better code readibility
* Initial stab at switch input state sensor
* Fix indentions
* Fix indentions
* Index updates
* More useless changes.
* And it finally works.
* Open should be a WARNING state.
* Update email
* Add line
* One empty line, not three.
* This is getting ridic.
* Add test data
* Fix disable notify
* Fix disable notify
* Disable all alerting
* fix db migration
* fix db migration
* fix db migration
* Add autoclearing active alerts if disable alerting set
* Add autoclearing active alerts if disable alerting set
* fix check
* Device in gray if disable_notify is set - not ignore tag
* Add support for TRENDnet switch, TEG-S80ES in particular
* Add trendnet.snmprec
* Add test data (JSON)
* Remove mib comment from yaml
* Update copyright info
* Use sysDescr value for Hardware
