* Fixing memory scale for datacom-dmos devices
Fixing memory scale for datacom-dmos devices
* Update datacom-dmos.yaml
Removing the line "index: 1" because the MIB shall provide the existent indexes.
* Uploading updated snmprec files
Uploading updated snmprec files after changing the datacom-dmos.yaml in order to fix the memory scale.
* Uploading updated json files
Uploading updated json files after changing the datacom-dmos.yaml in order to fix the memory scale.
* datacom-dmos updated snmprec files
* snmprec files
* Updated datacom-dmos test files (snmprec and json)
Updated datacom-dmos test files (snmprec and json). I had problems generating these files, so please ignore the commits without files I did earlier.
* Fix Tests
---------
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
* Added Zhone health and reduced ports to only physical ports.
* Liniting
* Move MIBs out of folder, doesn't work
* Add testing data.
* Added test data, sorry for delay
* Added test data again
* Move MIBs to folder
* Unsupported dirrective
* Add support for Forcepoint NGFW 6.10 and older
* Update forcepoint_forcepoint-ngfw-330.json
* Proc. discovery fix
---------
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
Draytek use a custom OID to define their devices memory usage, defined here: https://www.draytek.com/support/knowledge-base/5517
This commit includes a mempool definition with the new memory OID `1.3.6.1.4.1.7367.3.7` and relevant LibreNMS tests
* Added models in hirshmann definition file
* Added Hirschmann_ms4128.snmprec to ~/tests/snmpsim
* Generic SysObjectID
* Some devices are not replying with all the table data
* fix tests accordingly
* add more sensors
* Move Temperature to YAML
Discovery and polling are currently buggy, this will fix it and make it capable of handling more than one temp sensor.
History of temperatures will be lost here.
---------
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
* fix regex for hardware and version
* updated test data
* Update hwg-ste2.snmprec
* Create hwg-ste2.json
---------
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
* Added support of new OS for NTP/PTP systems:
- support of Meinberg microSync OS (mbg-meinbergos)
- support of Safran (Orolia) SecureSync OS (orolia-securesync)
- support of Adva OSA (5401 and 5412) OS (adva_fsp150cm)
* Fix Safran (Orolia) images
* Added Test-unit JSON files
* Changed SVG images
* Changed SVG images
* Changed SVG images
* Adding basic support for Datacom DmOS devices.
Adding basic support for Datacom DmOS devices. These devices includes OLTs and Switches developed by Datacom (Teracom Telematica Ltda):
https://www.datacom.com.br/en/produtos/dmos
All the product models which uses this OS (DmOS) have the same specific sysObjectID = .1.3.6.1.4.1.3709.1.2.137 So new future devices will also have this OID.
* Rename DMOS-SYSMON-MIB.mib to DMOS-SYSMON-MIB
removing extension ".mib" from the filename
* Rename DMOS-TC-MIB.mib to DMOS-TC-MIB
removing extension ".mib" from the filename
* JSON files
json files related to the snmprec files sent in an earlier commit.
* Update dm4770 test data
* Fix mib_dir
* Update datacom-dmos.yaml
---------
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Add support for FiberStore "data center" switches
FiberStore has two different model lines of switches, and this adds
support for the "data center" line. This was configured and tested
against the N5860-48SC model.
The MIBs are from FiberStore's website, with the exception of the
FS-FIBER-MIB (the website version is a little behind the software, so
support sent me an updated version and should be getting it published
soon).
This does not currently handle 4x10 or 4x25 QSFP+ light levels, as I
don't currently have any to test against.
* Add test data for fs-switch-dc
This is from a production switch, with data filtered to just the
FiberStore enterprises OID.
* Update fs-switch-dc_fs-switch-dc.json
* correct processors warn field name
* Update fs-switch-dc_fs-switch-dc.json
* Update fs-switch-dc.yaml
---------
Co-authored-by: Tony Murray <murraytony@gmail.com>
* rework
Sorry for the long waiting time. I've made some tests and found that the value 0 should be ignored anyway because some Cisco switches report a non-existing fan with a speed of 0 which causes several errors when adding e.g. a fanless switch. Therefore I would like to suggest to keep the skip_value for this case.
I've also seen no more fan flapping with the most recent switch firmware so maybe Cisco has fixed something internally.
* Fix Test Data sg350x-24p
* Corrected other ciscoSB-Test data
Corrected other ciscoSB-Test data
* Removed ciscosb generic test data
This snmprec behaves different for my test system and the git checks. In addition the model is missing.
* Reverted cbs250 testfile
For some reason the generated test file contains errors. Reverting
* Weired fix
* Fixed weired update
* Recreated snmp data for cbs250
Recreated snmp data for cbs250
* updatet test data
Reworked Test data with most recend version
* Removed unused SNMPsim-Data
the ciscosb_x snmpsim Data are not used. Most device types are covered with the other test data. SRW-Switch line is currently not fully working. I have such an old device I'll add test data in the future.
* Recaptured cbs250 Test Data
* Renamed cbs250 test data
I have the impression that the online test somehow does not reload the snmprec data correctly. Therefore I rename it to make sure it handles it as a new device
* Removed VLANs
* Removed Farenheit to Celsius conversion
It seems that with the most recent version cisco reports the temperature in C. https://community.librenms.org/t/cisco-cbs-350-reads-wrong-temperature/22038
* Fixed wrong copied data
* Altered warning limit to CLI-values
* Added snmprec data back
Added snmprec data back
* Add FortiGate Environment stats
Adding Temperature, Fanspeed and Voltage sensors
* Fix test data
* New test data
* Update fortigate test data
* 500d ospf ifIndex
* 60f3g4g bgpPeerIface null
---------
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Add support for Fujifilm printer
* Add support for Fujifilm printer
* fix Fujifilmprinter.yaml
* Add Fujifilm printer test unit
* remove snmprec supply descr contains utf8 character
* fix discovery yaml
* Add support for Nokia 1830 PSS Optical gear
Tested against 1830 PSS-8 Chassis, in single and multi-chassis configurations
Supports Optical Power, temperature, current, power, and a variety of card states, alarms, and trail status.
Of note: With multi-chassis nodes, reading values from the non-master can be a "slow" process, slow in that the default timeout Libre ships with can cause the SNMP client to begin issuing retries. This can result in the chassis daemon rate limiting and/or blocking the client. The solution here is to raise the SNMP timeout within each device's configuration; unfortunately those values are not configurable on a per-OS basis (at least not at this time).
* Removing Unused / Duplicate MIBs
* modifications needed for update of VALERE-DC-POWER-MIB with new file ELTEK-BC2000-DC-POWER-MIB
* add test results for BC2000 post update
* updated test file data
* re-upload of updated files
* reverted valere.json to defaults and recreated with proper varient .json
* replace vpwrShelfIndex with vpwrBayIndex
* updated test data
* Update test data
* try again valere_bc2000.json
---------
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Vmware vminfo
Remove legacy file and migrate to OS discovery
* tighter
* ios_stp-vlans working correctly now
* Make vmwVmGuestOS nullable
* Discover os info too
* VM Info module
* Apply fixes from StyleCI
* Fix log severity
* Fix log severity (more)
* VM Info module
* Poll with ESXi too because it is lightweight
add test data
* poller data now too
---------
Co-authored-by: StyleCI Bot <bot@styleci.io>
* Added grouping on the Voltage displays
Added groupings to better show which voltage and current variables that belongs together.
* Update enexus.json
* Update enexus_eltek-smartpack2-syst.json
* Update enexus_enexus.json
* Update enexus_smartpacks.json
* Update enexus_smartpacks2.json
* Update enexus_sp2touch.json
---------
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Add useful IF-MIB entries as 'unordered oids'
to Raisecom ROS and ROAP definitions because
they don't have increasing OIDs in snmpwalk
* Bump composer/composer from 2.5.8 to 2.6.4 (#15364)
Bumps [composer/composer](https://github.com/composer/composer) from 2.5.8 to 2.6.4.
- [Release notes](https://github.com/composer/composer/releases)
- [Changelog](https://github.com/composer/composer/blob/main/CHANGELOG.md)
- [Commits](https://github.com/composer/composer/compare/2.5.8...2.6.4)
---
updated-dependencies:
- dependency-name: composer/composer
dependency-type: direct:development
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* Update aviat-wtm.json (#15368)
* sort services by type and name (#15367)
* Added support for Cambium cnMatrix switches (#15351)
* Added support for Cambium cnMatrix switches
* Fixed styling issues
* Fixed styling issues
* Fixed duplicate, incorrectly labeled LLDP-EXT-DOT3-MIB and LLDP-EXT-DOT1-MIB
* Corrected MIB with the same name but with different OIDs configured: LLDP-EXT-MED/-CAMBIUM/-MIB
* Removed my added duplicate MIBs
* Removed unused MIBs
* Rearrange AD auth settings (#15363)
so it makes more sense, add missing settings
* Specify radius attributes for auth roles (#15374)
* Specify radius attributes for auth roles
* Clarify that any role can be defined
* Fixes check_dns against localhost when a search-domain is configured (#15373)
* Added extra ASN-range comments, added Priv eBGP on host details, changed color to light-blue instead of red (#15372)
* Moxa EDS improve discovery (#15375)
Consolidate walks so less need to be performed.
This should help a lot since each device model has its own MIB.
* Remove unused functions (#15371)
* Remove unused functions
inline other legacy functions
* Apply fixes from StyleCI
---------
Co-authored-by: StyleCI Bot <bot@styleci.io>
* Availability module fixes (#15369)
* Refactor poller to allow modules to run even if the device is down
Include core in config (but not webui) to avoid silly shenanigans
Inject datastore into polling
* Needed to split datastore interface
* Cleanup some data_udpate() references
* Apply fixes from StyleCI
* Fix legacy poller :D
* Output to the correct stream
* Fix lint issues
* Apply fixes from StyleCI
* Fix discovery not including core and submodule handling
* Use whereRaw
---------
Co-authored-by: StyleCI Bot <bot@styleci.io>
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Justin Lentz <monkeybrains7@gmail.com>
Co-authored-by: SourceDoctor <sourcehhdoctor@googlemail.com>
Co-authored-by: Noah Roufus <noaheroufus@gmail.com>
Co-authored-by: Tony Murray <murraytony@gmail.com>
Co-authored-by: barryodonovan <barry.odonovan@lightnet.ie>
Co-authored-by: Tim de Boer <tim@tim427.net>
Co-authored-by: StyleCI Bot <bot@styleci.io>
* Added support for Cambium cnMatrix switches
* Fixed styling issues
* Fixed styling issues
* Fixed duplicate, incorrectly labeled LLDP-EXT-DOT3-MIB and LLDP-EXT-DOT1-MIB
* Corrected MIB with the same name but with different OIDs configured: LLDP-EXT-MED/-CAMBIUM/-MIB
* Removed my added duplicate MIBs
* Removed unused MIBs
* Adding oid upsAdvOutputActivePower
Adding oid upsAdvOutputActivePower under the power section as this value is in watts.
* Create apc_smx750.json
Adding test JSON data for APC changes
* Create apc_smx750.snmprec
Adding snmpsim test data for APC changes
* Update apc_smx750.json
* Update apc_smx750.snmprec
* Update apc_smx750.json
