* Fixed Ubiquiti Airfiber LTU retrieval
* Fixed Rx/Tx modulation rate
* Fixed eth0 retrieval
* Fixed quality retrieval
* Fixed Tx/Rx rate
* Fixed distance retrieval
* Added Rx power chain0
* Added Rx power chain1
* Removed eth0 port status
* Removed duplicate Tx EIRP
* UBNT AF LTU: Remove the now useless eth0 port status sensor
eth0 is now logged by the port module, so we don't need a separate state sensor to log the status of the port.
This change was mentioned in the previous commit, but I forgot to include it...
* UBNT AF LTU: Updated test data
* UBNT AF LTU: Fix incorrect spaces
* UBNT AF LTU: Use getnext
* UBNT AF LTU: Add some type checks and fixes
* UBNT AF LTU: Passing sensor values to WirelessSensor calls
* UBNT AF LTU: Cast sensor value to int
* Revert changes made to the test data
* UBNT AF LTU: Add new test data
* UBNT AF LTU: Add discoverWirelessQuality function for quality discovery
* UBNT AF LTU: Use snmpwalk_cache_oid
* UBNT AF LTU: Remove blank line at start of control structure
* UBNT AF LTU: Fix RX Ideal Power Chain 1
* UBNT AF LTU: Fix distance sensor
* UBNT AF LTU: Update CPU usage OID
* UBNT AF LTU: Update test json
* UBNT AF LTU: Update test json 1.4.0
* Arista EOS: Added groups and better sensor names
* Changed few sensors naming to remove redundancy
* Test files
* Better naming v2
* More rewriting and grouping
* And more grouping/rewritting
* Update arista_eos_vrf.json
* Minor code format fix
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Update functions.inc.php
Skip changing the high limit threshold to low limit threshold value when high limit threshold doesn't exist for a sensor. If low limit threshold value was set by discovery process or manually, the same value would be also set for high limit threshold.
* Update cisco-entity-sensor.inc.php
Skip invalid sensor threshold values, which some Cisco ASR devices (probably other families too) return.
* Add snmprec data for Cisco ASR9010
* Create iosxr_asr9010.josr
* Create iosxr_asr9010.json
* Delete iosxr_asr9010.josr
* Update iosxr_asr9010.json
* Update iosxr_asr9010.json
Co-authored-by: Tony Murray <murraytony@gmail.com>
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
* SIAE add additional sensors and data
Improved labels
Modulation
Rate
Serial Number
Hardware name
* Add total rates
* was supposed to be divisor
* Short array syntax
* Added sensors for outlets on Schleifenbauer devices. Also use the outlet name when configured.
* Updated tests for Schleifenbauer
* Fixed on test for Schleifenbauer
* Optimized polling by retriving only outlets from the device with the network connection, not all devices on the data-bus.
* Fixed code styling
* Use shorthand comparisons for names
* Fix for conflicting $entPhysicalIndex
* Sev and Rel terminology varies between devices
* Most temp sensors don't have low limits, so adding
* update test data
Co-authored-by: Tony Murray <murraytony@gmail.com>
* Changed USV bypass state from alert to warning
* add /opt/librenms/tests/data/dell-ups_tower1000w.json
* add deltaups.json
* orvaldi-ups
* add generex-ups.json
* include two more generex-ups variants
* add eaton-mgeups_5px.json
* add tree more
* add istars.json
* restart hanging CI
* Migrate ironware sensor discovery from php to yaml.
* More sensors, add grouping.
* dynamic_discovery_get_value() becomes getValueFromData()
* Target a specific index with skip_values.
* Improve Brocade BGP session discovery/polling
This commit allows for the correct discovery of BGP sessions
with 32-bit ASNs, IPv6 neighbors using the BGP4V2-MIB which is
based on draft-ietf-idr-bgp4-mibv2-11 and also polls for IPv4
unicast received routes through the FOUNDRY-SN-BGP4-GROUP-MIB.
Copied most of the code from PR#8877 by @Mikeburke14, cleaned
up the code a little bit to match the normal LibreNMS style,
and fixed bgpPeers_cbgp discovery as well as polling for the
ipv4.unicast neighbors.
Note that older Brocade IronWare firmware versions are known
to have multiple defects relating to the BGP4V2-MIB which
might result in certain missing non-established neighbors.
Related vendor defect numbers:
- DEFECT000633962
-- Symptom: The OID bgp4V2PeerAdminStatus does not return the
correct value
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00g
- DEFECT000583319
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display all the BGP entries
-- Reported: NI 05.6.00
-- Resolved: NI 05.8.00e
- DEFECT000550309
-- Symptom: SNMP polling on bgp4V2PeerTable (OID brcdIp.3.5.1.1.2)
does not display the full information
-- Reported: NI 05.7.00
-- Resolved: NI 05.8.00c
* Add ironware CER & ICX platform test data.
* Re-add ironware.json compatible with current master branch.
* Fix Siklu Voltage
* Update tests
* Another test fix attempt
* Decimals..
* Ok, enough.
* Restore currently used index value and correctly push num_oid
* Update siklu.json
Co-authored-by: PipoCanaja <38363551+PipoCanaja@users.noreply.github.com>
* Initial stab at switch input state sensor
* Fix indentions
* Fix indentions
* Index updates
* More useless changes.
* And it finally works.
* Open should be a WARNING state.
* Update email
* Add line
* One empty line, not three.
* This is getting ridic.
* Add test data
* Added model, processor, fan and power supply for Alcatel Omnistack Switches
* Removed Index from description of Fan and power supply
* Merged PR #10655
* Added Temperature Sensor for AOS7+ Alcatel Enterprise Switches
* Added AOS7 mempools
* Added Tests
* Update aos.yaml
* Update alerts levels in state sensors
* Add test data
* added support for PDU/PDU2 MIB data (current, power) and added external sensor fpr humidity and temperature on PDU MIB
* added test data of 1 PDU-MIB device and 1 PDU2-MIB device
* Create raritan-pdu.json
* forgot to do save-data on last commit
* Update opengear MIBs to latest version.
* Replace PHP signal discovery with YAML.
* Update Opengear YAML with new sensors.
* Add test data for Opengear.
* Add the test data json for Opengear.
* Named to numbered index to avoid data loss.
* Added support for snmp monitored PDU from fs.com
* Added support for snmp monitored PDU from fs.com
* Fix sysObjectID 1.3.6.1.4.1.30966
* Create fs-net-pdu.json
* Added support for DGD and BER that are avalible on newer infinera-groove FW
* updated tests for new groove sensors
* Update infinera-groove.inc.php
* Update infinera-groove.inc.php
* Force test to run again
