* Added HA state support
* Adding tests for Checkpoint 15600
* Removing trailing white-space in gaia.yaml
* Updating old gaia config files
* Updating the non-variant json of gaia
* Updating git repo directly from a librenms docker container
* Overwriting the original gaia snmprec file
* Once more, with database. Praying to the god of unit tests.
* Removed the new tests
* Trying to re-add 15600
* Re-trying with a fresh snmprec file
* Trying new snmp rec file for 15600
* Remove ospf data
* Update gaia.yaml
Added single quotes
* Update gaia.yaml
* Updating the test after the sensor name change
Co-authored-by: Patrik Jonsson <[email protected]>
Co-authored-by: Tony Murray <[email protected]>
* Update Mikrotik MIBs to latest revision 202010080000Z
* Fix of Mikrotik SwOS definition - missing items removal. Added SwOS discovery file to add supported items.
* Add test data generated from CSS106-1G-4P-1S
* Fix of wrongly mixed old and new test data. Fresh export.
* Change raspberry_pi_sensors state
I think it is great that the codecs of a Raspberry are queried, but a non-existent codec license is not a critical sensor value. What do you think?
* Update linux_raspberrypi.json
* Update linux_raspberrypi.json
Co-authored-by: Tony Murray <[email protected]>
* new device os Raisecom Router OS (ROAP)
tried to add that as existing raisecom os but ended in new os, because they use a
new MIB base for Router OS and newer devices.
* add sensors
* Added tv_signal sensor class (TV signal in dBmV (decibells to millivolt))
* Added OS motorola-cm (Motorolla DOCSIS Cable Modem)
* Added OS thomson-cm (Thomson DOCSIS Cable Modem)
* Update from PDU_mib_244 to PDU_mib_262
* Add a new sysObjectID for the OS detection of schleifenbauer devices
* Update snmpsim data, no changes in save-test-data.php output.
* Revert "Update snmpsim data, no changes in save-test-data.php output."
This reverts commit ac7c0d5610.
* snmpsim + test data for OS schleifenbauer variant dpm27e
* Alcatel-Lucent support part2
* fixing low temp for aos6, mem for aos6 and linkagg for both
* style for aos6.yaml
* style2 for aos6.yaml
* fix style
* fix style
* add test data
My Cisco IP phones were still being auto discovered even when i had autodiscovery.xdp set to false, and it wasn't ignoring them for the auto discovery regex either. This statement had some misplaced Parenthesis. Working now on my install with this fix.
* Change mempools summary graph to show values
put swap on the negative axis
fix swap classification
* fix whitespace
* fix incorrect class
fix rrd rename logic
* Style
* missed one
* observe with the correct class
* Change mempools summary graph to show values
put swap on the negative axis
fix swap classification
* fix whitespace
* fix incorrect class
fix rrd rename logic
* Style
* missed one
* mempools to modern module
quick hacky hrstorage port
* port ucd-snmp-mib to Mempools
* Populate DB for ucd
Prep for yaml
* initial yaml attempt
* more complex conversions
fixes to YamlDiscovery, make leading $ optional and allow mib::oid format
* walk full tables and skip values
normalize percentages above 100
* handle precent only ones (specify total as 100)
* Move default polling out of YamlMempoolsDiscovery
* fixes
* Update test data hrstorage should be correct.
* perc_warn for hrstorage
* Host Resources, record buffer, cached, and shared
* Host Resources is always better, don't do both HR and UCD
* fix unix, include warning levels
* variable size
* consolidate skip_values
* define mempools schema
* number instead of integer
* more schema refactor
* one more skip_values reference
* throw error for invalid oid translation
aos6
* a* and Cisco
* updated test data
* update almost all hrstorage data files
* b*
* c* with test data
use standard cache for hrStorage
* use cache for storage module too
* hand bsnmp properly
* bdcom
* exclude total oid from yaml so it is not polled
May add a way to ignore this behavior and poll it, but I don't know if that is needed.
* automatically handle percent only values
* ciscowlc
* only poll used or free if we have used, free, and total.
* fix skipping
* the dlinkoning
fix find value when value "name" is numeric
* support numeric oids
* dnos/ftos attempt
* I guess we can't filter on total > 0
* edgecos
* e*
* f WIP
* f*
* gwd (aka g*)
* h* + procurve
* i*
* j*
* m*
* support 0% used memory (however unlikely)
* n*
* CISCO-PROCESS-MIB memory, share cache with processors module
* ignore mempools with invalid total
* p*
* quanta
* r*
fix raisecom mibs terribly broken
* s-z
* style fixes
* Move VRP back to PHP and make it actually work
* fix zynos
* update schema
* Update Cisco processor data for description bug fixes
* fix comware processors
* comware mempools with memory size
default precision to 1
* sophos-xg updated data
* hrstorage use ram size for buffers, cache, and shared
* Show memory available instead of free in device overview
* UCD, use same rrd format, store available instead of free in the db.
* Calculate availability for HOST-RESOURCES-MIB
* Convert UCD to standard polling
* rename old rrd files
* initial graph work
* graph WIP
* Graph looking decent
* Graph looking decent for hr
* remove old ucd_graph code
* handle availability mempool
more graph cleanup
* color adjustments
* remove accidental free calculation
* Update test data and fix corner cases
* fis pfsense
* update schema
* add default value for mempool_class
* fix whitespace
* update schema
* update schema correctly
* one more time
* fortigate_1500d-sensors missing oids
* Update docs.
* fix indent
* add implements MempoolsDiscovery explicitly to OS
* remove ucd_memory graph references
remove unused device_memory graph
* remove unused functions
* set devices with mempools to rediscover to prevent/minimize gaps
* use a subquery
* add overview graph
* port health mempools table
* Update device mempool
* only show overview if multiple
* Don't override user set warn percentages in discovery
* fix missed usage
* fix style
* Safety check to not rename rrd files incorrectly if migration has not been run.
* Fix overview percent bar and represent available and used on the bar
* missed an item to convert to mempool_class
* percent on the wrong side
It looks like VMware dropped the Appliance for vCenter 7 since it only comes as an appliance now. Example: `VMware vCenter Server 7.0.1.00100 embedded build 17004997 VMware, Inc x86_64`
* Add support new os SNR-ERD
mib files
* Add support new os SNR-ERD
discovery os
* Add support new os SNR-ERD
support sensors
* tests files
* tests json
* New device named bti800
Support new device for model bti sa-805
* Create bti800.yaml
* Create BTI8xx-MIB
* Create BTI8xx-SYSTEM-MIB
* Create BTI8xx-TC-MIB
* Create BTI8xx-INTERFACE-MIB
* Create BTI8xx-SFP-MIB
* Create bti800.inc.php
* Create bti800.inc.php
* Create bti800.inc.php
* Create bti800.snmprec
* Create bti800.json
* OS icon for BTI800
* Update bti800.yaml
Change mib folder name 'bti800' to 'bti'.
* Rename mibs/bti800/BTI8xx-MIB to mibs/bti/BTI8xx-MIB
Change directory named 'bti800' to 'bti'.
* Rename mibs/bti800/BTI8xx-INTERFACE-MIB to mibs/bti/BTI8xx-INTERFACE-MIB
Change directory named from 'bti800' to 'bti'
* Rename mibs/bti800/BTI8xx-SFP-MIB to mibs/bti/BTI8xx-SFP-MIB
Change directory named 'bti800' to 'bti'.
* Rename mibs/bti800/BTI8xx-SYSTEM-MIB to mibs/bti/BTI8xx-SYSTEM-MIB
Change directory named 'bti800' to 'bti'.
* Rename mibs/bti800/BTI8xx-TC-MIB to mibs/bti/BTI8xx-TC-MIB
Change directory named 'bti800' to 'bti'.
* Create bti800.yaml
Added system temperature and transceiver temperature for BTI800.
* Delete bti800.inc.php
System temperature and transceiver temperature code convert to yaml file locate at /includes/definitions/discovery/bti800.yaml
* Update bti800.inc.php
Add missing code at line 20.
* Update bti800.inc.php
* Update bti800.yaml
* Delete bti.svg
* Replace bti.svg to bti.png
* Update bti800.snmprec
* Update bti800.json
* Update bti800.json
* Update bti800.json
* Update bti800.yaml
* Update bti800.inc.php
Change call for each current Tx and Rx value by using pre_cache() function instead using snmp_get() function for each value to return.
* Rittal CMC III: Add device support for PU and PU Compact
* Rittal CMC III: Readd accidentally removed sysObjectID
* Rittal CMC III: Some small fixes
* Rittal CMC III: Use device serial number instead of the internal device id for state index naming
- version, hardware and serial is now read via yaml
- update test files
* Rittal CMC III: Check if the serial number is available
* Rittal CMC III: Update test data
* Rittal CMC III: Update unset
* Rittal CMC III: Remove space in yaml
* Adding Fortigate HA checks
* Fixed issues the linter had
* Moving sync checks to the poller since standalone units was marked as unsynchronized
* Whitespace lint corrections
* More whitespace linting fixes
* Removing haState since it only showed the state of one device in the cluster.
* Adding a third state fo sync where it will show a warning if a device that is part of a cluster does not have a peer
* Updating snmp test data for fortigate 1500d
* Changing numerical oids to names
* Restoring the original 1500d json file
* Adding cleaned test data
* Removing tags to see if that makes Travis happier
* Removing duplicate rows in SNMP data
* Take this Travis!
* Pretty please Travis?
* Fourth time's a charm?
* add OspfTos model to include ospfIfMetricEntry data (ospf interface cost)
* remove WIP comment
* add new model and db migration
* update OspfTos relationship to OspfPort and correct cleanup call
* add "Cost" to device\routing\ospf web UI interface
* updated db-schema test unit
* updated db_schema to resolve conflicts
* removed tos metrics from rrd ospf stats due to rrdcached errors
* reorder db_schema.yaml to match upstream
* readd ospf_tos to db_schema
* styleCI changes
* Capture OSPF test data
* add ospf unit tests for iosxr
* ospfAuthType
* update db_schema
* remove extra migrations
* add ospf tests for iosxe
* add ospf test to ios
* merge ospf_tos into ospf_ports
* update db_schema
* update ospf module unit tests for ios, iosxe, iosxr
* fix ospf_ports ospfIfMetricStatus column type
* update db_schema
* more efficient dropColumn in down() migration
Co-authored-by: Tony Murray <[email protected]>
* Faster initial database creation
Add db dumps to improve initial db migration
On my test system 13s -> 7s, a 46% reduction.
Should help out a lot on systems like RPi
* lnms schema:dump command
--snapshots saves db snapshots, otherwise it saves the yaml
* fix style
* fix timezones...
* not working with in-memory db yet
remove build.sql
lazyb0nes
Jezekus
Kevin Zink
paulierco
Vitali Kari
Ramūnas Lukoševičius
Martijn Schmidt
Torch
SourceDoctor
Erkan
djamp42
Jellyfrog
FingerlessGloves
Torch
Tony Murray
ottorei
hartred
HalianElf
Keryazmi
Denny Friebe
ospfbgp
Wheel
Patrik Jonsson
Hayden
averzicco
joseUPV
DerTFL