* fix: validation check cli php extensions
Fix fatal errors when mysql is not loaded / can't connect
* fix: discovery validation incorrectly detects on ping only devices.
* initial discovery
eltek-enexus discovery and polling
discovery and polling using yaml for subset of features
discovery and polling using yaml for subset of features
removed a few bits
removed some snmp_get() and renamed MIB
removed header bar mini graph
added snmpget discovery to yaml
renamed os to enexus
undo rebase
* Update enexus.yaml
* newdevice: support Avtech RoomAlert 32E/W
Move avtech discovery to yaml, took a bit of trickery
* More flexibility when checking pre-cached data
A little cleanup
* Add support for RoomAlert 32E/W external and wish temp sensors
Add RoomAlert 11E support (just temp sensors)
Updated ROOMALERT32E-MIB
* fix: devices detected as ibmtl
Guess at the sysObjectID, please report if you have devices that should be ibmtl and are no longer detected.
Add output of os in discovery.
* Always load all os for discovery. Should be cached most of the time.
* refactor: remove duplicated data collection in old wifi module
Still a bit more work before we can fully remove it
* remove unused graphs
update overview graphs for some wireless os
* feature: Allow snmpget in os discovery yaml
Re-submit after release
* Remove extra trim in discovery and in snmp_get.
also trim() always returns a string, so is_string() check is a waste of cpu cycles.
* fix: ping fails on servers that don't set PATH in cron
Find the full path to fping and persist it in the database.
Adds the ability to persist settings with Config::set()
* Add ability to set webui settings.
No display of for paths, because it would be inconsistent.
* Changed the NetIron checking logic from sysObjectID to sysDescr
* updated method of checking sysDescr in ironware mempool files
* Update ironware-dyn.inc.php
* Revert "Revert "feature: Allow snmpget in os discovery yaml (#7558)" (#7576)"
This reverts commit 426916dbe4.
* Revert "fix: lldp find_port_id finds not the most correct port (#7564)"
This reverts commit 7e05fff615.
* Revert "fix: Update RFC1123 Hostname Check (#7572)"
This reverts commit ebcfa45a93.
Order statements to give some results precedence over others.
Union the results but limit 1 so we can stop when we get the first result.
Checking if variables doesn't work very well without the device_id
* Update RFC1123 Hostname Check
The regex was wrong. It failed to match devices like `cisco-3750x` even though it is a valid hostname.
I picked this regex from the RFC1123 documentation, and updated it.
* Update CommonFunctionsTest.php
Update tests
* Updated to allow domains ending with a dot
* Added support for ping only devices.
* Renamed sql-schema/206 to 207.
* Discovery tried to detect the OS when it shouldn't.
* Updated db_schema.yaml
* Added ping icon.
* Don't show unused graphs and tabs when SNMP is disabled.
* Allow the user to specify OS of ping only devices.
* Removing custom OS now changes it to 'ping'.
* Removed unnecessary use of mres().
* UI select box for SNMP enable/disable.
* Hide device_ping_perf if ping is disable on device.
* Fixed SNMP settings update status messages.
* Added functionality to add ping only devices via the web ui.
* Added ping only option to addhost.php
* Added ping only support to snmp-scan.py
* Moved sql 208 to 211
* Fixed scrutinizer issues.
* Fixed broken ossearch.
* Added ping only support to the API.
* Updated API doc.
* Added (optional) to OS and hardware description. Hid Port Settings, Applications, Modules, Storage, Processors, Memory and Components from the edit menu
* Style fix.
* Updated ping icon.
* clean() instead of mres(). More escaping. Better help in snmp-scan.py and addhost.php
* Fixed scrutinizer issue.
* Always try SNMP in snmp-scan.py, new option for it in addhost.php. Slice instead of chunk in ajax_ossuggest.php. Other minor style changes.
* Updated sql modifications to insert the new column in the same place as in db_schema.yaml.
* fix: fix a couple of OS cache invalidation issues
Fixes issues where we might be using outdated os definitions.
* use Config and fix style issue
* only pull in settings from config.php (otherwise will possibly contain populated os config)
* feature: Allow snmpget in os discovery yaml
Convert all remaining os except airos.
Affected OS: asuswrt-merlin, ddnons, dsm, extrahop, huaweiups, ibmtl, pcoweb, pktj, qnap, remoteeye4, sentry3, sentry4, tomato
There should be not change in detection.
* Fix, asuswrt-merlin and tomato with snmpsim. May not have been an issue with actual devices because of -Oa leading " was a bit odd.
* missed file
* updated default list of modules in poller and discovery support docs.
* changed PollerSupport.md and DiscoverySupport.md to relect config.php as the correct location for local per-os module overrides
* removed 'tnms-nbi' module from docs and from defaults file. Removed 'wifi' from docs.
* Fix Moxa cpu polling problem, also add support for EDS-G508E, and power graphs
* Dynamic discovery support for EDS-G508E-T and IKS-6726A-2GTXSFP-T
* fixes as requested
* Added another snmp_cache_multi_oid and fixed a typo
* Revert back to old file name
* Add ability to get Freeswitch application data via snmp
On your Freeswitch server install the script from
https://github.com/librenms/librenms-agent/blob/master/agent-local/freeswitch
into /etc/snmp, make it executable and adjust it to your installation.
Configure your snmpd to use the sript as an extension. For example on Debian
add the following line to your /etc/snmp/snmpd.conf:
extend freeswitch /etc/snmp/freeswitch
Activate the Freeswitch application for your server on your LibreNMS server.
it should now start to receive data from your Freeswitch server via snmp.
* Graph "Calls" and "Channels" of Freeswitch agent
The Freeswitch agent sends Calls and Channels count and they weren't graphed
up to now. This is especially useful in settings where the Freeswitch
server does not act as a Gateway and thus the agent does not sent
Incoming and Outgoing Call numbers.
* Cleanup commented code and add myself to authors
* refactor: convert validations to modules to prep for gui integration
* accidentally dropped, schema update
* fix accidental output to webui
* mention discovery-wrapper.py and re-arrange.
* refine some fix statements
* rename the Config validation group to Configuration.
* fix some scrutinizer issues
remove as many local functions from validator.php as possible
move extensions from pre-check
remove duplicate timezone check
looks like there is some db schema differences between mariadb 10.1 and 10.2, investigating
* mariadb version diff take2
* Check schema version first for database.
Remove stop to go back to command line for install docs.
Add helpful link when there is no devices added to /addhost
* fix incorrect validation for empty string defaults
* Fix style
* Add additional file permissions checks
* catch exception and fail for invalid timezone
Change visuals a bit.
* add php version warning
* fix space
* Added Mitel Standard Linux OS Support
* removed duplicate svg, added snmprec test file, un-enable vmware discovery module
* msl os definition/polling improvements, mitel mib_dir creation
* added logmaster icon
* added LogMaster Ups Mibs
* Added battery temperature
* Added LogMaster Os discovery
* Added PPC UPS top level mib
* Added more sensors
* Added test for Os
* Added log image
* Disable unused modules to improve polling
* Changed discovery to match all second level.
* Fix logo size to 32x32
* Remove duplicated mib.
* Removed .mib extension
* Fix mib name.
* Added rfc1628 compatibility.
* Removed duplicated sensors due to rfc support
* Added sensor that differs from rfc 1628.
* fix: lldp discovery change local port resolution
dot1dBasePortIfIndex seems to skip some ports in certain configurations on Cisco devices.
Add quirk for Calix devices that return different port labels than they actually are.
* bdcom uses NMS-LLDP-MIB too.
* use dot1dBasePort to look up ifIndex if we can.
This array has already been init in the mempools polling.
Be deleting this init, we use the $storage_cache array populated by mempools polling, so we bypass a new snmp call.
This not just a optimisation, this also resolve issue with some WINDOWS (it timeout the second time we call hrstorage in a few second) like in #4929
* Added suporte for new medium model 5506-04
* Added tests for AN5516-04B
* Added tests for AN5516-04
* Added sysObjectID test for olts.
* Commit to trigger travis-ci
* Update fiberhome.yaml
Tony Murray
barryodonovan
Chris A. Evans
tomarch
FTBZ
Zmegolaz
Paul Heinrichs
Martin Zatloukal
Neil Lathwood
Daniel Preussker
Alan Gregory
Parth Laxmikant Kolekar
Aldemir Akpinar
Joel Kociolek
Søren Rosiak
TomEvin