DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
Fixes: #8933
* syntax issues.
I will probably resubmit after another travis run to pick up what's still wrong
* Add files via upload
* Add files via upload
* Update includes/definitions/discovery/cyberpower.yaml
* Add files via upload
* Add files via upload
* Updated json file
* netagent2 - 3Phase UPS support
* Revert "netagent2 - 3Phase UPS support"
This reverts commit 7900bc5bc0.
* OS netagent feature update - 3 phase support
* OS netagent2 update - 3phase support code cleanup
* OS netagent2 update - 3phase support code cleanup 2
* Netagent2 - Add status unknown to smoke and water states.
* NetAgent2 - changed detection method like murrant suggested.
* netagent2 - XPPC-MIB - 3 phase states support
* Added json test data
* remove_apc-ats
* add test data
* delete apc-ats.snmprec
* add apc_ats variant test file
* fix os in json
* Updated json test files
* Updated json test data
* Update to add support for environment sensor
Adding support for RM203 card environment sensor, temp and humidity.
* Update cyberpower.yaml
* Add files via upload
* Added json test data
* MGE: Improve support for Galaxy devices
* MGE: Improve support for Galaxy devices
* MGE: Improve support for Galaxy devices
* rfc1628 adaptations for Eaton MGE Galaxy 7000
* eaton-mge: test data on a Galaxy 7000
* rfc1628 adaptations for Eaton MGE Galaxy 7000
* rfc1628 adaptations for Eaton MGE Galaxy 7000
* eaton-mgeups: test data on a Galaxy 7000
* Add upsmgUtilityFailure and upsmgUtilityRestored trap support for eaton-mgeups
* dev: eaton-mgeups: OID in the dynamic definition for discovery
* dev: eaton-mgeups: cleaning
* add contributor
* add contributor
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
After you are done testing, you can remove the changes with `./scripts/github-remove`. If there are schema changes, you can ask on discord how to revert.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
NOTE: Those devices come all with same `sysName` so `$config['allow_duplicate_sysName'] = true;` is needed to have more than 1 working.
* added PBI MIB
I finally found a MIB for PBI device
* added PBI-MAIN-MIB
* added another PBI MIB
* added PBI MGSYSTEM-MIB
* added ird.yaml to definition
* added senors discovery for PBI devices
* added ird.inc.php for polling
* added logo for PBI
* added ird.json
* Rename PB-MAIN-MIB to PBI-MAIN-MIB
* Update ird.json
* Update PBI-4000P-5000P-MIB
* Update PBI-MAIN-MIB
* Update PBI-MGSIGNALCHARACTERISTICS-MIB
* Update PBI-MGSYSTEM-MIB
* Create ird.snmprec
* Updated json test file
* deleted frequency from yaml
I think that better will be see values from frequency in wirelles frequency, where it is in MHz
* Create Ird.php
* Update Ird.php
* Update Ird.php
* Update ird.json
* Update Ird.php
* device: Initial support for CXR-Networks Terminal Server
* device: Support for CXR-Networks Terminal Server - CodeClimate + cleaning
* device: renamed cxr-networks-ts and code improvement
* device: cxr-networks-ts test data
* device: renamed os as cxr-ts
* device: renamed os as cxr-ts, test data
* fix fan state
fix fan duty instead of rpm
* changed check to os definition bad_fanspeed
* revert back fan rpm
* Fix other state generics
* Update fanspeed.inc.php
* Update edgeswitch.json
* snmpsim tests data
* Update tests
Don't use NMS-PROCESS-MIB for pbn processors. This keeps tests from spitting out warnings about the broken mib.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [ ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
* Improved SmartAX OS support. Added CPU&Temperature for each card and hardware detection
* Minor fixes
* Uploaded test data
* Moved to snmpwalk_array_num()
* Fixed Temperature
* Added sensor power
* Fixed Style issues and proper hardware detection
* Fixed last style issue
* Last update. Added version and serial. Added traffic and processors mini graphs
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Removed sysObjectID extension to allow discovery of older RAD Airmux 400 devices
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [ ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [ ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
* Added Arris C3 to cmts.yaml
* Added Arris C3 hardware
* ARRIS CMTS->Move from cmts to arris_c4 yaml
* Fixed some Arris_c4 definitions
* Added Arris C3 CMTS
* Fixed some typos
* Arris C3 test files
* Arris C4 test files
* Deleted not anymore valid files
* Renamed from underscore
* Fixed some typos
* Correct test files
* Removed old snmprec files
* Correct test files v2
* Deleted more old files
* Return to cmts for valid_sensor() for Arris C4/C4c
* Re-done test files
* Re-do test files after rebase
* Fix Calix OS definitions
The main change is EXA (E7, etc) and B6 (Occam) devices are now their own OS
Now the follow OS exist:
exa: E7 EXA, E5-400, E5-48, E3-48, E3-8G
occamos: B6
Unchanged:
calix: E5-1**, E3-12C
axos: E7-2 AXOS, E9-2, E3-2, E5-520, E5-16F, E3-16F, E5-30x
* fix tests
exa_e7-2 seems like bogus data.
* additional tests, fix an error in the yaml
* Remove extra line return
* Add missed file
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
fix#8755
I have not added test data as it would require filterting quite some LLDP/IP's etc information.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [ ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
- Added port discovery for cmm3 (not available for cmm4, not that i could find)
- Added discovery for cmm4
- Added Power port cmm4
- Removed Processor bug by disabling processor on device.
I am unable to test CMM4 and may need someone to do so or review for possible errors.
Fixes Issues #8732, #8731
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
fix#8781
* device: Initial support for Allied Telesis Wireless devices
This commit provides basic info for Allied Telesis TQ Access Points
* device: allied wireless initial test data
* device: allied wireless
Fix up mibs.
-- Moved ATKK-WLAN-ACCESS to awplus mibs folder
--- ATKK-WLAN-ACCESS mib relies on AT-SMI-MIB
-- Changed Allied-wireless to look at awplus mibs folder instead of allied
--- As above due to newer AT-SMI-MIB file
- Performed new snmprec with walk on enterprise OID
-- For some reason the enterprise and wireless specific tables are not
walked by a default snmpwalk.
* add snmpwalk for analysis
* Attempt at wireless polling
* Delete allied-wireless-snmpwalk.txt
* device: fix basic allied wireless
* Update allied-wireless.json
* Simplify Allied Wireless test data
* fix allied-wireless definition
* device: allied-wireless renamed to allied-tq
* Update allied-tq.yaml
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X ] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
- Added initial detection for EfficientIP SOLIDserver
Changed some values to be explicitly boolean
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Hello
We have PDUs (APC) that were returning "-1" as Humidity value, and it seems that this happens when the optional humidity sensor is not plugged into the PDU.
This PR is adding a check to skip the negative values.
Bye
PipoCanaja
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
takenalias
Søren Rosiak
Mikael Sipilainen
tomarch
PipoCanaja
tarik
TheGreatDoc
jozefrebjak
FTBZ
crcro
Tony Murray
Lukáš Staňa
dupondje
Notre1
Cole R. Davis
Cory Hill
Steve Johnson
CrazyMax
Paul Heinrichs
mattie47
Neil Lathwood
TomEvin
centralscrutiniser
vivia11
Steven Barnes
