* newdevice: Added support for Saf Integra Access points
* Split SAF Integra models out
* added polling files
* Update saf-integra-b.yaml
* Update saf-integra-w.yaml
* fix: Fixed the high/low thresholds for Arista devices
* final updates
* push threshold changes
* more updates
* another update
* updated entity-sensor for current value calc
* hoping final update
* device: add support for Mimosa A5
Frequency and Tx/Rx Power
Unfortunately, we would have to walk the client table to get any client stats such as count.
* remove sysdescr after checking stats
* Forgot the mib new files
Specifically:
agentStpPortTable should be at agentStpSwitchConfigGroup.9, not .7
agentStpCstConfigGroup should be at .10, not .8
agentStpCstPortTable should be at .11, not .9
agentStpMstTable should be at .12, not .10
agentStpMstPortTable should be at .13, not .11
agentStpMstVlanTable should be at .14, not .12
agentStpBpduGuardMode should be at .7, not .13
agentStpBpduFilterDefault should be at .8, not .14
...and agentStpPortHelloTime should exist at agentStpPortEntry.10
* newdevice: Added support for Emerson energy systems (#7128)
* newdevice: Added support for Emerson energy systems
* added missing test
* Update ees.yaml
Added Avaya ERS fan and temp state discovery
* removed some left over debug code
Update avaya-ers.inc.php
* tests: Tests for errors in mib files
* Some additional mib test
* Use groups to exclude mib tests from the default test run
* Enable per-mib tests too
* Refactor tests for easy filtering with @dir or @file (relative to mib_dir)
* device: Improved HP ILO4 support
Added HP ILO4 temperature (HDD, motherboard), power, state (powersupply, HDD, Fans, memory slots) sensors support.
Tested with HP ProLiant ML350p Gen8-Gen9
* actual MIB file!
Move cabletron mibs into enterasys directory
move CISCO-LWAPP mibs into cisco directory and fix errors
remove MPLS-LDP mibs as I couldn't reconcile them and they seem unused
move watchguard IPSEC-ISAKMP-IKE-DOI-TC into watchguard directory
update several cisco mib files to remove errors
Fix typo in tripplite mib
Fix RADWIN-MIB-WINLINK1000 based on pdf I found online, some lines were missing, added the bare minimum to make it valid
* First pass at implementing ExtremeWireless support
Includes global AP and user count, and per-AP user count
* Coding style fixes
* Tabs will be the death of me
* Add license count, fix coding nits
* PHP 5.3 support hopefully
* Graph APs configured with a max of licenses installed
* Added Basic OS support for Benu
* Benu OS take 2
* Benu OS take 3
* Benu round 4 - this time for real
* added benu sensors
* reamed to benuos, renamed mibs, sensor rewrite pending
* upated sensors to use snmp_get_multi
* rename yaml
* rename yaml
* updated mempool discover to use multi get, fixed whitepaces, removed old commented out code from polling
* changed detection from sysDescr to sysObjectId
* Update benuos.yaml
* Update benuos.inc.php
* Update benuos.inc.php
* Update benuos.inc.php
* Update benuos.inc.php
* ADVA device support
- sensors for temperature, voltage, current and dbm
- ADVA mibs for FSP150CC and FSP3000R7
* sysObjectId - changed to level above instead of two entries
* OS for FSP150 and FSP3000R7 now in two seperate OS definitions
- split the files
- removed sysObjectId check for each
- removed hardcoded sensor limits
- removed more generic MIBs
* standardized variables / corrected declarations
* added missing MIB, style check code
* - corrected 'current' readings by adding $devisor
- changed rrdfile names to sensorname+$index
- moved LLDP-V2 mibs to main mib directory
* Committer: Chris A. Evans <[email protected]>
Add basic support for MRV OptiDriver Optical Transport Platform
* OS Detection
* Sensors
* Chassis temperature
* State
* Tx/Rx Optical Interface Power
* Power Supply
* Fan
* renamed: includes/definitions/mrv-optidriver.yaml -> includes/definitions/mrv-od.yaml
new file: includes/discovery/sensors/dbm/mrv-od.inc.php
deleted: includes/discovery/sensors/dbm/mrv-optidriver.inc.php
renamed: includes/discovery/sensors/pre-cache/mrv-optidriver.inc.php -> includes/discovery/sensors/pre-cache/mrv-od.inc.php
renamed: includes/discovery/sensors/state/mrv-optidriver.inc.php -> includes/discovery/sensors/state/mrv-od.inc.php
new file: includes/discovery/sensors/temperature/mrv-od.inc.php
deleted: includes/discovery/sensors/temperature/mrv-optidriver.inc.php
renamed: includes/polling/os/mrv-optidriver.inc.php -> includes/polling/os/mrv-od.inc.php
* modified: includes/discovery/sensors/dbm/mrv-od.inc.php
Added missing ')' in the if conditionals.
* Requested changes
modified: includes/definitions/mrv-od.yaml
modified: includes/discovery/sensors/state/mrv-od.inc.php
modified: includes/discovery/sensors/temperature/mrv-od.inc.php
modified: includes/polling/os/mrv-od.inc.php
removed extensions from all new mib files
* Add snmprec file to satisfy test units
new file: tests/snmpsim/mrv-od.snmprec
