source: Developing/os/Initial-Detection.md

This document will provide the information you should need to add basic detection for a new OS.

### Discovery

Discovery is now all done by yaml files, you do not and should not create a php file for discovery.

Create the new OS file which should be called `includes/definitions/pulse.yaml`. Here is a working example:

```yaml
os: pulse
text: 'Pulse Secure'
type: firewall
icon: pulse
over:
    - { graph: device_bits, text: 'Device Traffic' }
    - { graph: device_processor, text: 'CPU Usage' }
    - { graph: device_mempool, text: 'Memory Usage' }
discovery:
    - sysObjectId:
        - .1.3.6.1.4.1.12532.
```

`over`: This is a list of the graphs which will be shown within the device header bar (mini graphs top right).

`discovery`: Here we are detecting this new OS using sysObjectId, this is the preferred method for detection. 
Other options are available:

 - `sysObjectId` The preferred operator. Checks if the sysObjectID starts with one of the strings under this item
 - `sysDescr` Use this in addition to sysObjectId if required. Check that the sysDescr contains one of the strings under this item
 - `sysDescr_regex` Please avoid use of this. Checks if the sysDescr matches one of the regex statements under this item
 - `_except` You can add this to any of the above to exclude that element. As an example:

```yaml
discovery:
    - 
      sysObjectId:
          - .1.3.6.1.4.1.12532.
      sysDescr_except:
          - 'Not some pulse'
```

`group`: You can group certain OS' together by using group, for instance ios, nx-os, iosxr are all within a group 
called cisco.

`bad_ifXEntry`: This is a list of models for which to tell LibreNMS that the device doesn't support ifXEntry and to 
 ignore it:
 
```yaml
 bad_ifXEntry:
     - cisco1941
     - cisco886Va
     - cisco2811
```

`mib_dir`: You can use this to specify the additional directories to look in for MIBs:

```yaml
mib_dir:
    - juniper
    - cisco
```

`poller_modules`: This is a list of poller modules to either enable (1) or disable (0). Check `includes/defaults.inc.php` to see which modules are enabled/disabled by default.

```yaml
poller_modules:
    wifi: 1
    cisco-ace-serverfarms: 0
    cisco-ace-loadbalancer: 0
```

`discovery_modules`: This is the list of discovery modules to either enable (1) or disable (0). Check `includes/defaults.inc.php` to see which modules are enabled/disabled by default.

```yaml
discovery_modules:
     cisco-cef: 1
     cisco-sla: 1
     cisco-mac-accounting: 0
```


##### Discovery Logic
YAML is converted to an array in PHP.  Consider the following YAML:
```yaml
discovery: 
  - sysObjectId: foo
  - 
    sysDescr: [ snafu, exodar ]
    sysObjectId: bar

```
This is how the discovery array would look in PHP:
```php
[
     [
       "sysObjectId" => "foo",
     ],
     [
       "sysDescr" => [
         "snafu",
         "exodar",
       ],
       "sysObjectId" => "bar",
     ]
]
```


The logic for the discovery is as follows:
1. One of the first level items must match
2. ALL of the second level items must match (sysObjectId, sysDescr)
3. One of the third level items (foo, [snafu,exodar], bar) must match

So, considering the example:
 - `sysObjectId: foo, sysDescr: ANYTHING` matches
 - `sysObjectId: bar, sysDescr: ANYTHING` does not match
 - `sysObjectId: bar, sysDescr: exodar` matches 
 - `sysObjectId: bar, sysDescr: snafu` matches 


### Poller

OS polling is done within `includes/polling/os/$os.inc.php` and is where we detect certain values.
 
```php
<?php

$version = preg_replace('/[\r\n\"]+/', ' ', snmp_get($device, "productVersion.0", "-OQv", "PULSESECURE-PSG-MIB"));
$hardware = "Juniper " . preg_replace('/[\r\n\"]+/', ' ', snmp_get($device, "productName.0", "-OQv", "PULSESECURE-PSG-MIB"));

```

`$version`: The version of the OS running on the device.

`$hardware`: The hardware version for the device. For example: 'WS-C3560X-24T-S'

`$features`: Features for the device, for example a list of cards in the slots of a modular chassis.

`$serial`: The main serial number of the device.

### MIBs

If the device has MIBs available and you use it in the detection then you can add these in. It is highly 
recommended that you add mibs to a vendor specific directory. For instance HP mibs are in `mibs/hp`. Please 
 ensure that these directories are specified in the yaml detection file, see `mib_dir` above.

### Icon and Logo

It is highly recommended to use SVG images where possible, these scale and provide a nice visual image for users 
with HiDPI screens. If you can't find SVG images then please use png.

Create an SVG image of the icon and logo.  Legacy PNG bitmaps are also supported but look bad on HiDPI.
- A vector image should not contain padding.  
- The file should not be larger than 20 Kb. Simplify paths to reduce large files.
- Use plain SVG without gzip compression.
- The SVG root element must not contain length and width attributes, only viewBox.

##### Icon
- Save the icon SVG to `html/images/os/$os.svg`.
- Icons should look good when viewed at 32x32 px.
- Square icons are preferred to full logos with text.
- Remove small ornaments that are almost not visible when displayed with 32px width (e.g. ® or ™).

##### Logo
- Save the logo SVG to `html/images/logos/$os.svg`.
- Logos can be any dimension, but often are wide and contain the company name.
- If a logo is not present, the icon will be used.

##### Hints

Hints for [Inkscape](https://inkscape.org/):

- You can open a PDF or EPS to extract the logo.
- Ungroup elements to isolate the logo.
- Use `Path -> Simplify` to simplify paths of large files.
- Use `File -> Document Properties… -> Resize page to content…` to remove padding.
- Use `File -> Clean up document` to remove unused gradients, patterns, or markers.
- Use `File -> Save As -> Plain SVG` to save the final image.

By optimizing the SVG you can shrink the file size in some cases to less than 20 %.
[SVG Optimizer](https://github.com/svg/svgo) does a great job. There is also an [online version](https://jakearchibald.github.io/svgomg/).

#### The final check

Discovery
```bash
./discovery.php -h HOSTNAME
```

Polling
```bash
./poller.php -h HOSTNAME
```

At this step we should see all the values retrieved in LibreNMS.