-- -- whisp-box-mib.mib -- GENERATED FROM ui_db.xml -- -- **************************************************************************************************** -- Copyright 2005-2013 (c), Cambium Networks -- Cambium Networks Confidential Proprietary -- **************************************************************************************************** -- -- Canopy Box Level(AP,SM and Backhaul) MIB definitions. -- -- *************************************************************************************************** WHISP-BOX-MIBV2-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, Gauge32, IpAddress, NOTIFICATION-TYPE, Unsigned32 FROM SNMPv2-SMI DisplayString, MacAddress FROM SNMPv2-TC OBJECT-GROUP FROM SNMPv2-CONF WhispLUID, WhispMACAddress, EventString FROM WHISP-TCV2-MIB whispModules, whispBox FROM WHISP-GLOBAL-REG-MIB ; whispBoxLevelMibModule MODULE-IDENTITY LAST-UPDATED "200304150000Z" ORGANIZATION "Cambium Networks" CONTACT-INFO "Canopy Technical Support email: technical-support@canopywireless.com" DESCRIPTION "This module contains generic Box-Level MIB definitions for Canopy Radios." ::= {whispModules 8} -- ------------------------------------------------------------------------- -- Top Level Registrations whispBoxStatus OBJECT IDENTIFIER ::= {whispBox 1} whispBoxConfig OBJECT IDENTIFIER ::= {whispBox 2} whispBoxControls OBJECT IDENTIFIER ::= {whispBox 3} whispBoxEventLog OBJECT IDENTIFIER ::= {whispBox 5} whispBoxConf OBJECT IDENTIFIER ::= {whispBox 6} whispBoxGroups OBJECT IDENTIFIER ::= {whispBoxConf 1} whispBoxBridgeVar OBJECT IDENTIFIER ::= {whispBox 7} whispBoxCPVar OBJECT IDENTIFIER ::= {whispBox 9} whispBoxEvent OBJECT IDENTIFIER ::= {whispBox 12} whispBoxDHCPClientEvent OBJECT IDENTIFIER ::= {whispBoxEvent 1} whispBoxDNS OBJECT IDENTIFIER ::= {whispBox 13} whispBoxRFPhysical OBJECT IDENTIFIER ::= {whispBox 15} whispBoxRFConfig OBJECT IDENTIFIER ::= {whispBox 16} -- ------------------------------------------------------------------------- -- Canopy radio status page whispBoxSoftwareVer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version of software. Should be noted in the event customer has technical difficulties and need to contact technical support." ::={whispBoxStatus 1} whispBoxFPGAVer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Version of FPGA." ::={whispBoxStatus 2} whispBoxEsn OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Electronic serial number(MAC address) assigned to Radio." ::={whispBoxStatus 3} whispBoxBoot OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Software boot version." ::={whispBoxStatus 4} boxTemperature OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Radio temperature." ::={whispBoxStatus 5} boxDeviceType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the device." ::={whispBoxStatus 6} boxDeviceTypeID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device type ID." ::={whispBoxStatus 7} boxEncryption OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Device encryption type." ::={whispBoxStatus 8} etherLinkStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet link status." ::={whispBoxStatus 9} boxFrequency OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Frequency band of the device." ::={whispBoxStatus 10} platformVer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Hardware platform version. For internal use." ::={whispBoxStatus 11} platformType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Platform type: Canopy, Canopy Lite, Canopy Lite - Advantage, Advantage, Russian, Russian - Advantage." ::={whispBoxStatus 12} dhcpLanIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "LAN interface IP obtained through DHCP." ::={whispBoxStatus 13} dhcpLanSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "LAN interface Subnet Mask obtained through DHCP." ::={whispBoxStatus 14} dhcpLanGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "LAN interface Gateway obtained through DHCP." ::={whispBoxStatus 15} dhcpRfPublicIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "RF Public interface IP obtained through DHCP." ::={whispBoxStatus 16} dhcpRfPublicSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "RF Public interface Subnet Mask obtained through DHCP." ::={whispBoxStatus 17} dhcpRfPublicGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "RF Public interface Gateway obtained through DHCP." ::={whispBoxStatus 18} lanDhcpStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Display LAN interface current DHPC status." ::={whispBoxStatus 19} rfPublicDhcpStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Display RF Public interface current DHPC status." ::={whispBoxStatus 20} inSyncCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for number of In Synchronization." ::={whispBoxStatus 21} outSyncCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for number of Out of Synchronization." ::={whispBoxStatus 22} pllOutLockCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for number of PLL out of Lock." ::={whispBoxStatus 23} txCalFailure OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for number of TX Calibration failure." ::={whispBoxStatus 24} swVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Software version information." ::={whispBoxStatus 25} pldVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "PLD version information." ::={whispBoxStatus 26} platformInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Platform information." ::={whispBoxStatus 27} antPolarization OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Antenna polarization for FSK radios." ::={whispBoxStatus 28} packetOverloadCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total packet overload count." ::={whispBoxStatus 29} whispBoxP11Personality OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Board Personality Configuration of P11 and P12 radios." ::={whispBoxStatus 30} whispBoxP11FPGAType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "FPGA Type on P11 and P12 radios." ::={whispBoxStatus 31} whispBoxP11BstrapFPGAVer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "P11 Bootstrap FPGA Version." ::={whispBoxStatus 32} numDFSDetections OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of DFS/LBT Detections since last boot." ::={whispBoxStatus 33} rxOverrunPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter for number of received overrun packets error." ::={whispBoxStatus 34} boxTemperatureC OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Radio temperature in Celsius." ::={whispBoxStatus 35} boxTemperatureF OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Radio temperature in Fahrenheit." ::={whispBoxStatus 36} bridgeCbFecStatbin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB FEC Stats bin" ::={whispBoxStatus 37} bridgeCbFecStatbout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB FEC Stats bout" ::={whispBoxStatus 38} bridgeCbFecStatbtoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB FEC Stats btoss" ::={whispBoxStatus 39} bridgeCbFecStatbtosscap OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB FEC Stats btosscap" ::={whispBoxStatus 40} bridgeCbFecStatuin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB FEC Stats uin" ::={whispBoxStatus 41} bridgeCbFecStatuout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB FEC Stats uout" ::={whispBoxStatus 42} bridgeCbFecStatutoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB FEC Stats utoss" ::={whispBoxStatus 43} bridgeCbFecStatutosscap OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB FEC Stats utosscap" ::={whispBoxStatus 44} bridgeCbRFStatbin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB RF Stats bin" ::={whispBoxStatus 45} bridgeCbRFStatbout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB RF Stats bout" ::={whispBoxStatus 46} bridgeCbRFStatbtoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB RF Stats btoss" ::={whispBoxStatus 47} bridgeCbRFStatbtosscap OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB RF Stats btosscap" ::={whispBoxStatus 48} bridgeCbRFStatuin OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB RF Stats uin" ::={whispBoxStatus 49} bridgeCbRFStatuout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB RF Stats uout" ::={whispBoxStatus 50} bridgeCbRFStatutoss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB RF Stats utoss" ::={whispBoxStatus 51} bridgeCbRFStatutosscap OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB RF Stats utosscap" ::={whispBoxStatus 52} bridgeCbErrStatNI1QSend OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Error Stats ErrNI1QSend" ::={whispBoxStatus 53} bridgeCbErrStatNI2QSend OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Error Stats ErrNI2QSend" ::={whispBoxStatus 54} bridgeCbErrStatBridgeFull OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Error Stats BridgeFull" ::={whispBoxStatus 55} bridgeCbErrStatSendMsg OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Error Stats SendMsg" ::={whispBoxStatus 56} bridgeCbErrStatAPFecQSend OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Error Stats APFecQSend" ::={whispBoxStatus 57} bridgeCbErrStatApRfQSend OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB Error Stats ApRfQSend" ::={whispBoxStatus 58} rfStatXmtUDataCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Transmit Unicast Data Count" ::={whispBoxStatus 59} rfStatXmtBDataCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Transmit Broadcast Data Count" ::={whispBoxStatus 60} rfStatRcvUDataCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Receive Unicast Data Count" ::={whispBoxStatus 61} rfStatRcvBDataCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Receive Broadcast Data Count" ::={whispBoxStatus 62} rfStatXmtCntlCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Transmit Control Count" ::={whispBoxStatus 63} rfStatRcvCntlCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Receive Control Count" ::={whispBoxStatus 64} rfStatInSyncCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats In Sync Count" ::={whispBoxStatus 65} rfStatOutSyncCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Out Sync Count" ::={whispBoxStatus 66} rfStatOverrunCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Overrun Count" ::={whispBoxStatus 67} rfStatUnderrunCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Underrun Count" ::={whispBoxStatus 68} rfStatRcvCorruptDataCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Receive Corrupt Data Count" ::={whispBoxStatus 69} rfStatBadBcastCtlCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Bad Broadcast Control Count" ::={whispBoxStatus 70} rfStatPLLOutOfLockCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats PLL Out of Lock Count" ::={whispBoxStatus 71} rfStatBeaconVerMismatchCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Beacon version Mismatch Count" ::={whispBoxStatus 72} rfStatBadFreqBcnRcvCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Wrong Frequency Beacon Received Count" ::={whispBoxStatus 73} rfStatnonLiteBcnRcvCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Non Lite Beacon Received Count" ::={whispBoxStatus 74} rfStatUnsupFeatBcnRcvCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Unsupported Feature Beacon Received Count" ::={whispBoxStatus 75} rfStatUnkwnFeatBcnRcvCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Unknown Feature Beacon Received Count" ::={whispBoxStatus 76} rfStatTxCalFailCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats TX Calibration Failures Count" ::={whispBoxStatus 77} rfStatBadInSyncIDRcv OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Bad In Sync ID Received Count" ::={whispBoxStatus 78} rfStatTempOutOfRange OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Temperature Out of Range Count" ::={whispBoxStatus 79} rfStatRSSIOutOfRange OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats RSSI Out of Range Count" ::={whispBoxStatus 80} rfStatRangeCapEnf OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Range Cap Enforced Count" ::={whispBoxStatus 81} rfStatRcvLTStart OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Rcv LT Start Count" ::={whispBoxStatus 82} rfStatRcvLTStartHS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Rcv LT Start HS Count" ::={whispBoxStatus 83} rfStatRcvLTResult OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Rcv LT Result Count" ::={whispBoxStatus 84} rfStatXmtLTResult OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Xmt LT Result Count" ::={whispBoxStatus 85} whispFeatureKeyOrigin OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Origin of Feature Key which includes GMT time and location of the Key programming (if time is 0 the key was converted locally)" ::={whispBoxStatus 86} radioMSN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "MSN of the radio." ::={whispBoxStatus 87} updateStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current Status of Device Update" ::={whispBoxStatus 88} syslogStatTxSuccesses OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The count of Syslog messages sent to UDP layer." ::={whispBoxStatus 89} syslogStatDropped OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of dropped syslog messages due to device overload and/or resource limitations." ::={whispBoxStatus 90} fecStatLinkLost OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet link lost count" ::={whispBoxStatus 91} fecStatLinkDetected OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet link detected count" ::={whispBoxStatus 92} natDhcpStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Display NAT Public interface current DHPC status." ::={whispBoxStatus 93} fecInDiscardsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet in discards count." ::={whispBoxStatus 94} fecInErrorsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet in errors count." ::={whispBoxStatus 95} fecOutDiscardsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet out discards count." ::={whispBoxStatus 96} fecOutErrorsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet out errors count." ::={whispBoxStatus 97} rfInDiscardsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF in discards count." ::={whispBoxStatus 98} rfInErrorsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF in errors count." ::={whispBoxStatus 99} rfOutDiscardsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF out discards count." ::={whispBoxStatus 100} rfOutErrorsCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF out errors count." ::={whispBoxStatus 101} fecInDiscardsOverloadCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet in discards overload." ::={whispBoxStatus 102} fecOutDiscardsOverloadCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet out discards overload." ::={whispBoxStatus 103} rfInDiscardsOverloadCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rf in discards overload." ::={whispBoxStatus 104} rfOutDiscardsOverloadCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rf out discards overload." ::={whispBoxStatus 105} fpgaCompileInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Display the fpga compiled attributes. (Engineering Only)" ::={whispBoxStatus 106} fpgaBuildDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Display the entire fpga build date string. (Engineering Only)" ::={whispBoxStatus 107} aggregateBandwidthCap OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum aggregate (uplink + downlink) the radio is capable of." ::={whispBoxStatus 108} calibrationStatusBool OBJECT-TYPE SYNTAX INTEGER { notCalibrated(0), calibrated(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "Boolean OID to show if device is calibrated. Applicable to FSK and MIMO radios only." ::={whispBoxStatus 109} calibrationStatusBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "String to show if radio is calibrated. Applicable to FSK and MIMO radios only." ::={whispBoxStatus 110} radioEngKeyed OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This will be set either as 0 if the engineering key patch is not applied to the radio or 1 if it is applied." ::={whispBoxStatus 111} bridgeCbFecStatfloods OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB RF Stats Floods (Multipoint AP only)" ::={whispBoxStatus 112} bridgeCbRFStatfloods OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bridge CB RF Stats Floods (Multipoint AP only)" ::={whispBoxStatus 113} agcGainRxCH1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Rcv Gain on Catalina Rx CH1 of SM." ::={whispBoxStatus 114} agcGainRxCH2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Rcv Gain on Catalina Rx CH2 of SM." ::={whispBoxStatus 115} antType OBJECT-TYPE SYNTAX INTEGER { integrated(0), external(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the antenna is integrated or external (connectorized)." ::={whispBoxStatus 116} rfStatRcvCorruptControlCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Receive Corrupt Control Data Count" ::={whispBoxStatus 117} rfStatXmtMDataCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Transmit Multicast Data Count" ::={whispBoxStatus 217} rfStatRcvMDataCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "RF Scheduler Stats Receive Multicast Data Count" ::={whispBoxStatus 218} -- The following definitions deal with Canopy Box Level configuration variables. linkNegoSpeed OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Link negotiation speeds. H10BT -- 10 Base T Half Duplex, F10BT -- 10 Base T Full Duplex, H100BT -- 100 Base T Half Duplex, F100BT -- 100 Base T Full Duplex. Separate the values with comma when doing a set. e.g. H10BT,F10BT,H100BT,F100BT" ::={whispBoxConfig 1} colorCode OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "Color code." ::={whispBoxConfig 2} displayOnlyAccess OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This variable is deprecated." ::={whispBoxConfig 3} fullAccess OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Full access password." ::={whispBoxConfig 4} webAutoUpdate OBJECT-TYPE SYNTAX INTEGER UNITS "Seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Web page auto update in seconds. 0 means disabled." ::={whispBoxConfig 5} pass1Status OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Password 1(display only) status." ::={whispBoxConfig 6} pass2Status OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Password 2(full access) status." ::={whispBoxConfig 7} bridgeEntryTimeout OBJECT-TYPE SYNTAX INTEGER (25..1440) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "Bridge table time out Range : 25 -- 1440 Minutes." ::={whispBoxConfig 8} snmpMibPerm OBJECT-TYPE SYNTAX INTEGER { readWrite(0), readOnly(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Read/Write permission for MIB groups." ::={whispBoxConfig 9} bhTimingMode OBJECT-TYPE SYNTAX INTEGER { timingMaster(1), timeingSlave(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Variable to switch between Timing Master and Timing Slave. For Backhaul units only." ::={whispBoxConfig 10} bhModulation OBJECT-TYPE SYNTAX INTEGER { tenMbitsPerSecond(0), twentyMbitsPerSecond(1)} MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Modulation scheme. For Backhaul units only. Only level 4 backhaul can be changed to 20Mbits/Second." ::={whispBoxConfig 11} powerControl OBJECT-TYPE SYNTAX INTEGER { low(0), normal(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Power control." ::={whispBoxConfig 12} extFilterDelay OBJECT-TYPE SYNTAX INTEGER UNITS "nanoseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "External Filters Delay. For 900MHz radios only." ::={whispBoxConfig 13} antennaGain OBJECT-TYPE SYNTAX INTEGER UNITS "dBi" MAX-ACCESS read-write STATUS current DESCRIPTION "External Antenna Gain. For radios that uses an external antenna or the DFS feature." ::={whispBoxConfig 14} eirp OBJECT-TYPE SYNTAX INTEGER UNITS "dBm" MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This variable is deprecated." ::={whispBoxConfig 15} dynamicLearning OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To enable VLAN dynamic learning." ::={whispBoxConfig 16} managementVID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Management VLAN VID." ::={whispBoxConfig 17} agingTimeout OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Aging timeout." ::={whispBoxConfig 18} frameType OBJECT-TYPE SYNTAX INTEGER { allframes(0), taggedonly(1), untaggedonly(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Allow only tagged frame." ::={whispBoxConfig 19} addVlanMember OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Add VLAN memeber." ::={whispBoxConfig 20} removeVlanMember OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Remove VLAN memeber." ::={whispBoxConfig 21} scheduling OBJECT-TYPE SYNTAX INTEGER { hardware(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To use hardware or software scheduling" ::={whispBoxConfig 22} transmitterOP OBJECT-TYPE SYNTAX INTEGER UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Transmitter output power. This is not available on OFDM SMs." ::={whispBoxConfig 23} bridgeEnable OBJECT-TYPE SYNTAX INTEGER { enable(0), disable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Disable or enable bridging functionality for a BH unit." ::={whispBoxConfig 24} fecEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Disable or enable FEC error correction functionality for multipoint units." ::={whispBoxConfig 25} trapIP1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Configure with whispBoxDNS.trap1." ::={whispBoxConfig 26} trapIP2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Configure with whispBoxDNS.trap2." ::={whispBoxConfig 27} trapIP3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Configure with whispBoxDNS.trap3." ::={whispBoxConfig 28} trapIP4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Configure with whispBoxDNS.trap4." ::={whispBoxConfig 29} trapIP5 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Configure with whispBoxDNS.trap5." ::={whispBoxConfig 30} trapIP6 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Configure with whispBoxDNS.trap6." ::={whispBoxConfig 31} trapIP7 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Configure with whispBoxDNS.trap7." ::={whispBoxConfig 32} trapIP8 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Configure with whispBoxDNS.trap8." ::={whispBoxConfig 33} trapIP9 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Configure with whispBoxDNS.trap9." ::={whispBoxConfig 34} trapIP10 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Configure with whispBoxDNS.trap10." ::={whispBoxConfig 35} commStringRWrite OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Read/Write Community string. This is a write-only OID." ::={whispBoxConfig 36} subnetMask OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the management IP 1." ::={whispBoxConfig 37} mngtIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Management IP address 1." ::={whispBoxConfig 38} allowVIDAccess OBJECT-TYPE SYNTAX INTEGER { enable(0), disable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Allow or disallow local SM management VID access." ::={whispBoxConfig 39} setDefaultPlug OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "If enable parameters are set to Factory Defaults upon default plug detection." ::={whispBoxConfig 40} hwsCompatibility OBJECT-TYPE SYNTAX INTEGER { enable(0), disable(1)} MAX-ACCESS read-write STATUS obsolete DESCRIPTION "If enable, it ensures 6.0 compatibility with HWS." ::={whispBoxConfig 41} gpsInput OBJECT-TYPE SYNTAX INTEGER { generateSyncSignal(0), syncToReceivedSignalTimingPort(1), syncToReceivedSignalPowerPort(2), syncToiGPS(3), autoSync(4), autoSyncFreeRun(5)} MAX-ACCESS read-write STATUS current DESCRIPTION "Values 1, 2, 3 have been deprecated. (0) Generate AP sync signal. (1) Deprecated. Sync AP to received signal (Timing Port/UGPS). It will set AutoSync. (2) Deprecated. Sync AP to received signal (Power Port). It will set AutoSync plus Free Run. (3) Deprecated. Sync AP using iGPS (Only on devices which support it). It will set AutoSync plus Free Run. (4) AutoSync. (5) AutoSync plus Free Run." ::={whispBoxConfig 42} ism OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable ISM on 5.7GHz frequency band radios." ::={whispBoxConfig 43} hiPriority OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Enable Hi Priority Data Queue on BH radios." ::={whispBoxConfig 44} userName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User name." ::={whispBoxConfig 45} userPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User password." ::={whispBoxConfig 46} userAccessLevel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "User access level." ::={whispBoxConfig 47} deleteUser OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "User name to remove." ::={whispBoxConfig 48} twoXRate OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS obsolete DESCRIPTION "To enable or disable double rate." ::={whispBoxConfig 49} lanDhcpState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To enable or disable LAN Interface DHCP feature." ::={whispBoxConfig 50} sessionTimeout OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Timer for Telnet, Web and FTP sessions." ::={whispBoxConfig 51} vlanMemberSource OBJECT-TYPE SYNTAX INTEGER { configured(0), active(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Specified the VLAN member source to display. 0=configured, 1=active configuration. Note that this OID is internal to SNMP and is not available at the Web Interface." ::={whispBoxConfig 52} addCustomFreqList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Add Custom Frequencies. Frequencies can be added in a list separated by commas. Example: 355000, 345000 Frequencies must be in increments of .05 MHz. Examples: 340025, 340050 A get will return the current custom frequency list. Max string length entered cannot exceed 128 character. Note if there is not enough room for all the frequencies none will be added. For use on 3.5/3.6 GHz MIMO OFDM Radios only." ::={whispBoxConfig 53} removeCustomFreqList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Remove Custom Frequencies. Frequencies can be removed in a list separated by commas. Example: 355000, 345000 A get will return the current custom frequencies. For use on 3.5 GHz OFDM Radios only." ::={whispBoxConfig 54} allowColocation OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Allow or disallow Colocation for software scheduling Backhaul Timing Masters with hardware scheduling Backhaul Timing Masters." ::={whispBoxConfig 55} changeUsrPwd OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Allow to change the password of a given user of a given user. Usage: userName,password." ::={whispBoxConfig 56} -- The following definitions deal with the allowed SNMP IP & subnet masks mngtIP2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Management IP address 2." ::={whispBoxConfig 57} subnetMask2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the management IP 2." ::={whispBoxConfig 58} mngtIP3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Management IP address 3." ::={whispBoxConfig 59} subnetMask3 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the management IP 3." ::={whispBoxConfig 60} mngtIP4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Management IP address 4." ::={whispBoxConfig 61} subnetMask4 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the management IP 4." ::={whispBoxConfig 62} mngtIP5 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Management IP address 5." ::={whispBoxConfig 63} subnetMask5 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the management IP 5." ::={whispBoxConfig 64} mngtIP6 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Management IP address 6." ::={whispBoxConfig 65} subnetMask6 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the management IP 6." ::={whispBoxConfig 66} mngtIP7 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Management IP address 7." ::={whispBoxConfig 67} subnetMask7 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the management IP 7." ::={whispBoxConfig 68} mngtIP8 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Management IP address 8." ::={whispBoxConfig 69} subnetMask8 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the management IP 8." ::={whispBoxConfig 70} mngtIP9 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Management IP address 9." ::={whispBoxConfig 71} subnetMask9 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the management IP 9." ::={whispBoxConfig 72} mngtIP10 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Management IP address 10." ::={whispBoxConfig 73} subnetMask10 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Subnet mask for the management IP 10." ::={whispBoxConfig 74} bhvlanEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To enable or disable VLAN for Backhaul Master/Slave." ::={whispBoxConfig 75} lldpBroadcastEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To enable Broadcast of LLDP message, if disabled LLDP uses multicast" ::={whispBoxConfig 76} regionCode OBJECT-TYPE SYNTAX INTEGER { none(0), australia(6), brazil(5), canada(3), india(8), indonesia(10), ireland(11), russia(7), spain(9), us(2), other(1), europe(4)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Set Region Code for the Unit. Used the individual region[Region] OIDs instead." ::={whispBoxConfig 77} russiaRegion OBJECT-TYPE SYNTAX INTEGER { category1(1), category2(2), category3(3), category4(4)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Set Category Region for Russian 5.9/6.05 GHz Radio Only. Use setting under regionAsia now." ::={whispBoxConfig 78} commStringROnly OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Set Read Only commnunity string." ::={whispBoxConfig 79} ethernetLinkSpeed OBJECT-TYPE SYNTAX INTEGER { forced10H(1), forced10F(2), forced100H(4), forced100F(8), auto10F-10H(3), auto100H-10H(5), auto100H-10F-10H(7), auto100F-100H(12), auto100F-100H-10H(13), auto100F-100H-10F-10H(15), auto1000F-100F-100H-10F-10H(63)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set/Get Ethernet link speed and duplex settings. Note that the Gigabit options are only valid for boards that support Gigabit speeds." ::={whispBoxConfig 80} cyclicPrefix OBJECT-TYPE SYNTAX INTEGER { one-quarter(0), one-eighth(1), one-sixteenth(2), one-quarter-one-eighth(3), one-quarter-one-sixteenth(4), one-eighth-one-sixteenth(5), one-quarter-one-eighth-one-sixteenth(6)} MAX-ACCESS read-write STATUS current DESCRIPTION "Cyclic Prefix value, for OFDM Radios only. Deprecated for MIMO SMs. For PMP430 SMs, this value is only used while in PMP430 mode (1/16 is forced in PMP450 mode)." ::={whispBoxConfig 81} numberCustomFreq OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of custom frequencies added. There is a maximum of 100. For use on 3.5 GHz OFDM Radios only." ::={whispBoxConfig 82} channelBandwidth OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current channel bandwidth in MHz. For use on OFDM Radios only. Obsoleted for MIMO SMs." ::={whispBoxConfig 83} setDefaults OBJECT-TYPE SYNTAX INTEGER { noChangeOrUndoFactoryDefaults(0), setToFactoryDefaults(1), factoryDefaultsSet-AwaitingReboot(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to 1 will set the radio to Factory Defaults after the next reboot. Setting this to 0 will undo Factory Defaults if and only if Factory Defaults have been set previously without rebooting. Reading this OID will return 0 if Factory Defaults are not set, or a 2 if Factory Defaults are set and we are now awaiting a reboot. NOTE: this operation is reversible as long as you write a 0 to this OID prior to reboot. As a security measure, this OID is only valid when the radio was booted with the default plug inserted. If the default plug was not inserted on boot, then attempting to set this OID will fail." ::={whispBoxConfig 84} radioRateAdapt OBJECT-TYPE SYNTAX INTEGER { onex(0), onexmimo(4), onextwox(1), onextwoxmimo(5), onextwoxthreex(2), onextwoxthreexfourx(3), onextwoxfourx(7), onextwoxfourxsixx(8), onextwoxfourxsixxeightx(9)} MAX-ACCESS read-write STATUS current DESCRIPTION "Rate adaptation parameter. 0: no rate adaptation. 1: 1x and 2x adaptation. 2: 1x, 2x and 3x adaptation (OFDM only). 3: 1x, 2x, 3x and 4x adaption (OFDM only). 4: 1x (MIMO duplicate on both paths). 5: 1x/2x (MIMO). 7: 1x/2x/4x (MIMO). 8: 1x/2x/4x/6x (MIMO). 9: 1x/2x/4x/6x/8x (MIMO). For PMP430 radios this applies to Downlink Rate Adapt only. Use radioRateAdaptUL for setting uplink rate adapt on PMP430 radios." ::={whispBoxConfig 85} siteInfoViewable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable non login users the ability to view Site Information" ::={whispBoxConfig 86} largeVCQ OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Large VC Qs for SM or PTP radios. Enable when Uplink is being used for camera video feed." ::={whispBoxConfig 87} latitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The latitude setting of this unit in decimal degrees." ::={whispBoxConfig 88} longitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The longitude setting of this unit in decimal degrees." ::={whispBoxConfig 89} height OBJECT-TYPE SYNTAX INTEGER (-2147483647..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "The height setting of this unit in meters." ::={whispBoxConfig 90} bandwidth OBJECT-TYPE SYNTAX INTEGER { bandwidth5mhz(1), bandwidth10mhz(3), bandwidth20mhz(5), bandwidth5-10mhz(8), bandwidth5-20mhz(9), bandwidth10-20mhz(10), bandwidth5-10-20mhz(11)} MAX-ACCESS read-write STATUS current DESCRIPTION "Radio bandwidth setting. Deprecated for MIMO SMs. Instead use bandwidthScan." ::={whispBoxConfig 91} dataScramblingMethod OBJECT-TYPE SYNTAX INTEGER { legacyDataScrambling(0), r10DataScrambling(1)} MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This OID is for OFDM only and is obsolete." ::={whispBoxConfig 92} portVID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Backhaul Port VID (PVID)." ::={whispBoxConfig 93} radioRateAdaptUL OBJECT-TYPE SYNTAX INTEGER { onex(0), onexmimo(4), onextwox(1), onextwoxmimo(5), onextwoxthreex(2), onextwoxthreexfourx(3), onextwoxfourx(7), onextwoxfourxsixx(8), onextwoxfourxsixxeightx(9)} MAX-ACCESS read-write STATUS current DESCRIPTION "Uplink Rate adaptation parameter (OFDM PMP430 only). 0: no rate adaptation. 1: 1x and 2x adaptation. 2: 1x, 2x and 3x adaptation. 3: 1x, 2x, 3x and 4x adaption. For PMP430 radios this applies to Uplink Rate Adapt only. Use radioRateAdapt for setting downlink rate adapt. 4x rate adapt not permitted on AES, 20MHz, 1/16 CP radios." ::={whispBoxConfig 94} providerVID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Provider VID for QinQ VLAN." ::={whispBoxConfig 95} mac1VIDMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address for Entry 1 in MAC Address VID Mapping Table." ::={whispBoxConfig 96} mac1VIDMapVid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "VID for Entry 1 in MAC Address VID Mapping Table." ::={whispBoxConfig 97} mac2VIDMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address for Entry 2 in MAC Address VID Mapping Table." ::={whispBoxConfig 98} mac2VIDMapVid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "VID for Entry 2 in MAC Address VID Mapping Table." ::={whispBoxConfig 99} mac3VIDMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address for Entry 3 in MAC Address VID Mapping Table." ::={whispBoxConfig 100} mac3VIDMapVid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "VID for Entry 3 in MAC Address VID Mapping Table." ::={whispBoxConfig 101} mac4VIDMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address for Entry 4 in MAC Address VID Mapping Table." ::={whispBoxConfig 102} mac4VIDMapVid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "VID for Entry 4 in MAC Address VID Mapping Table." ::={whispBoxConfig 103} mac5VIDMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address for Entry 5 in MAC Address VID Mapping Table." ::={whispBoxConfig 104} mac5VIDMapVid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "VID for Entry 5 in MAC Address VID Mapping Table." ::={whispBoxConfig 105} mac6VIDMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address for Entry 6 in MAC Address VID Mapping Table." ::={whispBoxConfig 106} mac6VIDMapVid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "VID for Entry 6 in MAC Address VID Mapping Table." ::={whispBoxConfig 107} mac7VIDMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address for Entry 7 in MAC Address VID Mapping Table." ::={whispBoxConfig 108} mac7VIDMapVid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "VID for Entry 7 in MAC Address VID Mapping Table." ::={whispBoxConfig 109} mac8VIDMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address for Entry 8 in MAC Address VID Mapping Table." ::={whispBoxConfig 110} mac8VIDMapVid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "VID for Entry 8 in MAC Address VID Mapping Table." ::={whispBoxConfig 111} mac9VIDMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address for Entry 9 in MAC Address VID Mapping Table." ::={whispBoxConfig 112} mac9VIDMapVid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "VID for Entry 9 in MAC Address VID Mapping Table." ::={whispBoxConfig 113} mac10VIDMapAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MAC Address for Entry 10 in MAC Address VID Mapping Table." ::={whispBoxConfig 114} mac10VIDMapVid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "VID for Entry 10 in MAC Address VID Mapping Table." ::={whispBoxConfig 115} vlanPortType OBJECT-TYPE SYNTAX INTEGER { q(0), qinq(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN Port Type for VLAN interface. Default is Q." ::={whispBoxConfig 116} vlanAcceptQinQFrames OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Allow/Disallow packets already doubly-tagged (QinQ) to ingress the FEC of BHM, BHS, or MP SM. Not configurable on MP AP." ::={whispBoxConfig 117} whispWebUserAccessMode OBJECT-TYPE SYNTAX INTEGER { local(0), remote(1), remotethenlocal(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "This variable selects if web page users for the radio should be authenticated locally or via a centralised remote Radius server" ::={whispBoxConfig 118} usrAccountEnableAccounting OBJECT-TYPE SYNTAX INTEGER { disable(0), deviceAccess(1), dataUsage(2), all(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Select the level of accounting information to be reported to the server" ::={whispBoxConfig 119} allowRejectThenLocal OBJECT-TYPE SYNTAX INTEGER { doNotAllowLocalAuthifAAAReject(0), allowLocalAuthIfAAAReject(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Control for allowing local authenication if the AAA remote server" ::={whispBoxConfig 120} snrCalculation OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This OID is deprecated. Receive quality calulation is always on since it no longer affects packet per second performance." ::={whispBoxConfig 121} priorityPrecedence OBJECT-TYPE SYNTAX INTEGER { eight021pThenDiffServ(0), diffservThenEight021p(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Allows user to decide if 802.1p or DiffServ priority bits should be used first when making priority decisions." ::={whispBoxConfig 122} installationColorCode OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Installation Color Code. Allows non-configured SMs to register to an AP with UCC enabled in order to facilitate remote provisioning." ::={whispBoxConfig 123} apSmMode OBJECT-TYPE SYNTAX INTEGER { sm(1), ap(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set AP to SM or SM to AP. Useful for facillitating scripting of running Spectrum Analyzer on an AP. Radio must have AP Feature Key. 1 - Set to SM, 0 - Set to AP." ::={whispBoxConfig 124} pppoeFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set PPPoE packet filter." ::={whispBoxConfig 125} smbFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set SMB packet filter." ::={whispBoxConfig 126} snmpFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set SNMP packet filter." ::={whispBoxConfig 127} userP1Filter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set user defined port 1 packet filter." ::={whispBoxConfig 128} userP2Filter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set user defined port 2 packet filter." ::={whispBoxConfig 129} userP3Filter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set user defined port 3 packet filter." ::={whispBoxConfig 130} allOtherIpFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set all other IPv4 packet filter." ::={whispBoxConfig 131} allIpv4Filter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set all IPv4 packet filter. Enabling this will automatically enable all of the known IP filters (SMB, SNMP, Bootp, IPv4 Mcast, User Defined Ports, and All Other IPv4)." ::={whispBoxConfig 132} arpFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set ARP packet filter." ::={whispBoxConfig 133} allOthersFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set all other packet filter when." ::={whispBoxConfig 134} -- User Defined Port Filtering Configuration userDefinedPort1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "An integer value of number one user defined port. Range:0-65535" ::={whispBoxConfig 135} port1TCPFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set user defined port 1 TCP traffic filter." ::={whispBoxConfig 136} port1UDPFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set user defined port 1 UDP traffic filter." ::={whispBoxConfig 137} userDefinedPort2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "An integer value of number two user defined port. Range:0-65535" ::={whispBoxConfig 138} port2TCPFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set user defined port 2 TCP traffic filter." ::={whispBoxConfig 139} port2UDPFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set user defined port 2 UDP traffic filter." ::={whispBoxConfig 140} userDefinedPort3 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "An integer value of number three user defined port. Range:0-65535" ::={whispBoxConfig 141} port3TCPFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set user defined port 3 TCP traffic filter." ::={whispBoxConfig 142} port3UDPFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set user defined port 3 UDP traffic filter." ::={whispBoxConfig 143} bootpcFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set bootp client sourced packets filter." ::={whispBoxConfig 144} bootpsFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set bootp server sourced packets filter." ::={whispBoxConfig 145} ip4MultFilter OBJECT-TYPE SYNTAX INTEGER { filterOff(0), filterOn(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set IPv4 MultiCast packets filter when NAT is disabled." ::={whispBoxConfig 146} packetFilterDirection OBJECT-TYPE SYNTAX INTEGER { upstream(1), downstream(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "To set packet filter direction. Upstream is default." ::={whispBoxConfig 147} encryptionConfig OBJECT-TYPE SYNTAX INTEGER { des(0), aes(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "For supported radio, set the encryption algorithm to use. DES by default. Cannot be set if encryption is disabled." ::={whispBoxConfig 148} pppoeCtlPriority OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Prioritization of PPPoE Control packets." ::={whispBoxConfig 149} ftpPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Port used to for FTP. Default is 21." ::={whispBoxConfig 150} httpPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Port used to for HTTP. Default is 80." ::={whispBoxConfig 151} snmpPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Port used to for SNMP. Default is 161." ::={whispBoxConfig 153} snmpTrapPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Port used to for SNMP Traps. Default is 162." ::={whispBoxConfig 154} syslogDomainNameAppend OBJECT-TYPE SYNTAX INTEGER { disableDomain(0), appendDomain(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Select whether to append the configured management domain name to the Syslog server name. For example, if dnsMgmtDomainName is set to 'example.com', syslogServerAddr is set to 'syslog1', and syslogDomainNameAppend is set to appendDomain, the Syslog Server name used would be 'syslog1.example.com'." ::={whispBoxConfig 156} syslogServerAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Syslog server address either in dotted decimal notation or a Fully Qualified Domain Name" ::={whispBoxConfig 157} syslogServerPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Listening port on the Syslog server. Default is 514." ::={whispBoxConfig 158} syslogMinLevel OBJECT-TYPE SYNTAX INTEGER { fatal(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7)} MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the minimum syslog severity to transmit. Messages with a lower severity value (i.e. numerically higher) than this will not be transmitted." ::={whispBoxConfig 159} lan1DhcpRelease OBJECT-TYPE SYNTAX INTEGER { releaseIP(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable to '1' will release LAN1's IP address and send a DHCP Release Message to the DHCP server. Applicable only when NAT is disabled." ::={whispBoxConfig 201} lan1DhcpRenew OBJECT-TYPE SYNTAX INTEGER { renewIP(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable to '1' will renew LAN1's lease time for its current IP address. Applicable only when NAT is disabled." ::={whispBoxConfig 202} lan3DhcpRelease OBJECT-TYPE SYNTAX INTEGER { releaseIP(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable to '1' will release LAN3's (RF Public) IP address and send a DHCP Release Message to the DHCP server. Applicable only when NAT is enabled." ::={whispBoxConfig 203} lan3DhcpRenew OBJECT-TYPE SYNTAX INTEGER { renewIP(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable to '1' will renew LAN3's (RF Public) lease time for its current IP address. Applicable only when NAT is enabled." ::={whispBoxConfig 204} natDhcpRelease OBJECT-TYPE SYNTAX INTEGER { releaseIP(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable to '1' will release WAN's (NAT Public) IP address and send a DHCP Release Message to the DHCP server. Applicable only when NAT is enabled." ::={whispBoxConfig 205} natDhcpRenew OBJECT-TYPE SYNTAX INTEGER { renewIP(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable to '1' will renew WAN's (NAT Public) lease time for its current IP address. Applicable only when NAT is enabled." ::={whispBoxConfig 206} region OBJECT-TYPE SYNTAX INTEGER { none(0), otherRegulatory(1), asia(6), europe(3), northAmerica(2), oceania (5), southAmerica(4), africa(7)} MAX-ACCESS read-only STATUS current DESCRIPTION "Set Region Code for the Unit." ::={whispBoxConfig 207} regionAsia OBJECT-TYPE SYNTAX INTEGER { none(0), india(2), indonesia(3), russiacategory1(4), russiacategory2(5), russiacategory3(6), russiacategory4(7), vietnam(8)} MAX-ACCESS read-write STATUS current DESCRIPTION "Country Code for Asia." ::={whispBoxConfig 208} regionEurope OBJECT-TYPE SYNTAX INTEGER { none(0), spain(2), ireland(3), denmark(4), finland(5), germany(6), greece(7), iceland(8), liechtenstein(9), norway(10), portugal(11), switzerland(12), serbia(13), unitedkingdom(14)} MAX-ACCESS read-write STATUS current DESCRIPTION "Country Code for Europe." ::={whispBoxConfig 209} regionNorthAmerica OBJECT-TYPE SYNTAX INTEGER { none(0), canada(3), unitedStates(2), mexico(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Country Code for North America." ::={whispBoxConfig 210} regionOceania OBJECT-TYPE SYNTAX INTEGER { none(0), australia(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Country Code for Oceania." ::={whispBoxConfig 211} regionSouthAmerica OBJECT-TYPE SYNTAX INTEGER { none(0), brazil(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Country Code for South America." ::={whispBoxConfig 212} regionOtherRegulatory OBJECT-TYPE SYNTAX INTEGER { none(0), other(1), otherFCC(2), otherETSI(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Regulatory setting for governing regulatory body." ::={whispBoxConfig 213} interleave OBJECT-TYPE SYNTAX INTEGER { default(0), disabled(1), enabled(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Engineering use only." ::={whispBoxConfig 214} receiveQualityDebug OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable receive quality calculations for every packet. Enabling(1) will calulate receive quality on all receiving packets. Due to load on CPU, will slightly packet per second capabilities on AP/BH. Default to disabled for all radios. Only applicable to GenII OFDM products and up." ::={whispBoxConfig 215} apType OBJECT-TYPE SYNTAX INTEGER { standardAP(0), remoteAP(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "AP Mode of Operation. In standardAP mode, all possible sync sources will be made availble and used for autoSync operation. In remoteAP mode, sync over power port will not be available as a sync source. Remote AP mode is where the AP's timing port is connected to an SM's timing port via a sync cable. In this mode, GPS data is unavailable and sync over power port shouldn't be used. If sync over power is desired, and a CMM or other sync over power device is in use, then select standardAP mode." ::={whispBoxConfig 216} regionAfrica OBJECT-TYPE SYNTAX INTEGER { none(0), algeria(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Country Code for Africa." ::={whispBoxConfig 217} addCustomFreqMimo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Adds a particular frequency, applicable for both the AP and SM." ::={whispBoxConfig 218} removeCustomFreqMimo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Removes a particular frequency, applicable for both the AP and SM." ::={whispBoxConfig 219} timedSpectrumAnalysisDurationBox OBJECT-TYPE SYNTAX INTEGER (10..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Value in seconds for a timed spectrum analysis. Range is 10-1000 seconds." ::={whispBoxConfig 220} spectrumAnalysisActionBox OBJECT-TYPE SYNTAX INTEGER { stopSpectrumAnalysis(0), startTimedSpectrumAnalysis(1), startContinuousSpectrumAnalysis(2), idleNoSpectrumAnalysis(3), idleCompleteSpectrumAnalysis(4), inProgressTimedSpectrumAnalysis(5), inProgressContinuousSpectrumAnalysis(6), notReady(7)} MAX-ACCESS read-write STATUS current DESCRIPTION "Start or stop timed or continuous Spectrum Analysis and also give status. (0) - Stop Spectrum Analysis (1) - Start Timed Spectrum Analysis (2) - Start Continuous Spectrum Analysis (3) - Idle, no Spectrum Analysis results. (4) - Idle, Spectrum Analysis results available. (5) - Timed or Remote Spectrum Analysis in progress. (6) - Continuous Spectrum Analysis in progress. Note: Continuous mode has a max of 24 hours. (7) - Spectrum Analyzer not ready." ::={whispBoxConfig 221} -- Box level control. saveFlash OBJECT-TYPE SYNTAX INTEGER { doNotSaveToFlash(0), saveToFlash(1)} MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This variable is currently deprecated." ::={whispBoxControls 1} reboot OBJECT-TYPE SYNTAX INTEGER { finishedReboot(0), reboot(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable to 1 will reboot the unit. When the unit finishes rebooting, it will be in finishedReboot state." ::={whispBoxControls 2} clearEventLog OBJECT-TYPE SYNTAX INTEGER { notClear(0), clear(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable to 1 will clear the event log." ::={whispBoxControls 3} rebootIfRequired OBJECT-TYPE SYNTAX INTEGER { rebootNotRequired(0), rebootRequired(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the variable to 1 will reboot the unit if reboot is required." ::={whispBoxControls 4} clearBERStats OBJECT-TYPE SYNTAX INTEGER { doNotClearBERStats(0), clearBERStats(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Set to clear the BER statistics by sending a 'clearBERStats'. Value is set back to 'doNotClearBERStats' When action is complete." ::={whispBoxControls 5} updateDevice OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Use to update the software on the device" ::={whispBoxControls 6} whispBoxEvntLog OBJECT-TYPE SYNTAX EventString MAX-ACCESS read-only STATUS current DESCRIPTION "Event log for AP and SM." ::={whispBoxEventLog 1} whispBoxAttributesGroup OBJECT-GROUP OBJECTS { vlanAcceptQinQFrames, providerVID, mac1VIDMapAddr, mac1VIDMapVid, mac2VIDMapAddr, mac2VIDMapVid, mac3VIDMapAddr, mac3VIDMapVid, mac4VIDMapAddr, mac4VIDMapVid, mac5VIDMapAddr, mac5VIDMapVid, mac6VIDMapAddr, mac6VIDMapVid, mac7VIDMapAddr, mac7VIDMapVid, mac8VIDMapAddr, mac8VIDMapVid, mac9VIDMapAddr, mac9VIDMapVid, mac10VIDMapAddr, mac10VIDMapVid, vlanPortType, portVID, timedSpectrumAnalysisDurationBox, spectrumAnalysisActionBox, calibrationStatusBox, calibrationStatusBool, agcGainRxCH1, agcGainRxCH2, whispBoxSoftwareVer, whispBoxFPGAVer, whispBoxEsn, whispBoxBoot, boxTemperature, boxDeviceType, boxDeviceTypeID, boxEncryption, etherLinkStatus, boxFrequency, platformVer, platformType, dhcpLanIp, dhcpLanSubnetMask, dhcpLanGateway, dhcpRfPublicIp, dhcpRfPublicSubnetMask, dhcpRfPublicGateway, lanDhcpStatus, rfPublicDhcpStatus, natDhcpStatus, inSyncCount, outSyncCount, pllOutLockCount, txCalFailure, swVersion, pldVersion, platformInfo, antType, antPolarization, packetOverloadCounter, whispBoxP11Personality, whispBoxP11FPGAType, whispBoxP11BstrapFPGAVer, numDFSDetections, rxOverrunPkts, boxTemperatureC, boxTemperatureF, linkNegoSpeed, installationColorCode, colorCode, displayOnlyAccess, fullAccess, webAutoUpdate, pass1Status, pass2Status, bridgeEntryTimeout, snmpMibPerm, bhTimingMode, powerControl, extFilterDelay, antennaGain, eirp, dynamicLearning, managementVID, agingTimeout, frameType, addVlanMember, removeVlanMember, scheduling, transmitterOP, bridgeEnable, fecEnable, trapIP1, trapIP2, trapIP3, trapIP4, trapIP5, trapIP6, trapIP7, trapIP8, trapIP9, trapIP10, commStringRWrite, subnetMask, mngtIP, allowVIDAccess, setDefaultPlug, hwsCompatibility, gpsInput, ism, hiPriority, userName, userPassword, userAccessLevel, deleteUser, twoXRate, lanDhcpState, dnsIpState, sessionTimeout, vlanMemberSource, addCustomFreqList, removeCustomFreqList, allowColocation, changeUsrPwd, mngtIP2, subnetMask2, mngtIP3, subnetMask3, mngtIP4, subnetMask4, mngtIP5, subnetMask5, mngtIP6, subnetMask6, mngtIP7, subnetMask7, mngtIP8, subnetMask8, mngtIP9, subnetMask9, mngtIP10, subnetMask10, bhvlanEnable, lldpBroadcastEnable, radioRateAdapt, fpgaBuildDate, fpgaCompileInfo, syslogDomainNameAppend, syslogServerAddr, syslogServerPort, syslogMinLevel, syslogStatTxSuccesses, syslogStatDropped, apType, apSmMode, region, regionCode, regionAsia, regionEurope, regionNorthAmerica, regionOceania, regionSouthAmerica, regionAfrica, regionOtherRegulatory, radioRateAdaptUL, dnsPrimaryMgmtIP, dnsAlternateMgmtIP, dnsMgmtDomainName, addCustomFreqMimo, removeCustomFreqMimo, ftpPort, httpPort, snmpPort, snmpTrapPort, lan1DhcpRelease, lan1DhcpRenew, lan3DhcpRelease, lan3DhcpRenew, natDhcpRelease, natDhcpRenew, radioEngKeyed, priorityPrecedence, pppoeCtlPriority, rfStatXmtUDataCnt, rfStatXmtBDataCnt, rfStatXmtMDataCnt, rfStatRcvUDataCnt, rfStatRcvBDataCnt, rfStatRcvMDataCnt, rfStatXmtCntlCnt, rfStatRcvCntlCnt, rfStatInSyncCount, rfStatOutSyncCount, rfStatOverrunCount, rfStatUnderrunCount, rfStatRcvCorruptDataCount, rfStatRcvCorruptControlCount, rfStatBadBcastCtlCnt, rfStatPLLOutOfLockCnt, rfStatBeaconVerMismatchCnt, rfStatBadFreqBcnRcvCnt, rfStatnonLiteBcnRcvCnt, rfStatUnsupFeatBcnRcvCnt, rfStatUnkwnFeatBcnRcvCnt, rfStatTxCalFailCnt, rfStatBadInSyncIDRcv, rfStatTempOutOfRange, rfStatRSSIOutOfRange, rfStatRangeCapEnf, rfStatRcvLTStart, rfStatRcvLTStartHS, rfStatRcvLTResult, rfStatXmtLTResult, whispFeatureKeyOrigin, updateStatus, bridgeCbFecStatbin, bridgeCbFecStatbout, bridgeCbFecStatbtoss, bridgeCbFecStatbtosscap, bridgeCbFecStatuin, bridgeCbFecStatuout, bridgeCbFecStatutoss, bridgeCbFecStatutosscap, bridgeCbRFStatbin, bridgeCbRFStatbout, bridgeCbFecStatfloods, bridgeCbRFStatfloods, bridgeCbRFStatbtoss, bridgeCbRFStatbtosscap, bridgeCbRFStatuin, bridgeCbRFStatuout, bridgeCbRFStatutoss, bridgeCbRFStatutosscap, bridgeCbErrStatNI1QSend, bridgeCbErrStatNI2QSend, bridgeCbErrStatBridgeFull, bridgeCbErrStatSendMsg, bridgeCbErrStatAPFecQSend, bridgeCbErrStatApRfQSend, fecStatLinkDetected, fecStatLinkLost, fecInDiscardsCount, fecInErrorsCount, fecOutDiscardsCount, fecOutErrorsCount, rfInDiscardsCount, rfInErrorsCount, rfOutDiscardsCount, rfOutErrorsCount, fecInDiscardsOverloadCount, fecOutDiscardsOverloadCount, rfInDiscardsOverloadCount, rfOutDiscardsOverloadCount, interleave, radioMSN, latitude, longitude, height, bandwidth, dataScramblingMethod, whispWebUserAccessMode, usrAccountEnableAccounting, allowRejectThenLocal, pppoeFilter, smbFilter, snmpFilter, userP1Filter, userP2Filter, userP3Filter, allOtherIpFilter, allIpv4Filter, arpFilter, allOthersFilter, userDefinedPort1, port1TCPFilter, port1UDPFilter, userDefinedPort2, port2TCPFilter, port2UDPFilter, userDefinedPort3, port3TCPFilter, port3UDPFilter, bootpcFilter, bootpsFilter, ip4MultFilter, packetFilterDirection, encryptionConfig} STATUS current DESCRIPTION "Canopy Box Level Attributes group." ::= {whispBoxGroups 1} whispBoxControlGroup OBJECT-GROUP OBJECTS { saveFlash, reboot, clearEventLog, rebootIfRequired, clearBERStats, updateDevice, siteInfoViewable, largeVCQ, snrCalculation, receiveQualityDebug} STATUS current DESCRIPTION "Canopy Box Level control group." ::= {whispBoxGroups 2} whispBoxBTGroup OBJECT-GROUP OBJECTS { whispBridgeMacAddr, whispBridgeDesLuid, whispBridgeAge, whispBridgeExt, whispBridgeHash, whispBridgeCAM} STATUS current DESCRIPTION "Canopy Box Bridging Table group." ::= {whispBoxGroups 3} whispBoxVLANTableGroup OBJECT-GROUP OBJECTS { whispVID, whispVType, whispVAge} STATUS current DESCRIPTION "Canopy Box VLAN member Table group." ::= {whispBoxGroups 4} whispBoxCPTableGroup OBJECT-GROUP OBJECTS { codePoint0, codePoint1, codePoint2, codePoint3, codePoint4, codePoint5, codePoint6, codePoint7, codePoint8, codePoint9, codePoint10, codePoint11, codePoint12, codePoint13, codePoint14, codePoint15, codePoint16, codePoint17, codePoint18, codePoint19, codePoint20, codePoint21, codePoint22, codePoint23, codePoint24, codePoint25, codePoint26, codePoint27, codePoint28, codePoint29, codePoint30, codePoint31, codePoint32, codePoint33, codePoint34, codePoint35, codePoint36, codePoint37, codePoint38, codePoint39, codePoint40, codePoint41, codePoint42, codePoint43, codePoint44, codePoint45, codePoint46, codePoint47, codePoint48, codePoint49, codePoint50, codePoint51, codePoint52, codePoint53, codePoint54, codePoint55, codePoint56, codePoint57, codePoint58, codePoint59, codePoint60, codePoint61, codePoint62, codePoint63} STATUS current DESCRIPTION "Code Point Table group." ::= {whispBoxGroups 5} whispBoxUserTableGroup OBJECT-GROUP OBJECTS { entryIndex, userLoginName, userPswd, accessLevel, loginStatus, loginMethod, sessionTime} STATUS current DESCRIPTION "Canopy Box User Information Table group." ::= {whispBoxGroups 6} whispLayer2NeighborTableGroup OBJECT-GROUP OBJECTS { entryL2Index, neighborMAC, neighborIP, neighborSiteName} STATUS current DESCRIPTION "Canopy Box Layer 2 Neighbor information." ::= {whispBoxGroups 7} whispBoxNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { boxLan1DHCPClientEvent} STATUS current DESCRIPTION "Canopy Box Notification Group." ::= {whispBoxGroups 8} whispBridgeTbUsed OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of used entries in bridging table." ::={whispBoxBridgeVar 1} whispBridgeTbFree OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of free entries in bridging table." ::={whispBoxBridgeVar 2} whispBridgeTbErr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Bridging table errors." ::={whispBoxBridgeVar 3} codePoint0 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Code Point 0." ::={whispBoxCPVar 1} codePoint1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 1." ::={whispBoxCPVar 2} codePoint2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 2." ::={whispBoxCPVar 3} codePoint3 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 3." ::={whispBoxCPVar 4} codePoint4 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 4." ::={whispBoxCPVar 5} codePoint5 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 5." ::={whispBoxCPVar 6} codePoint6 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 6." ::={whispBoxCPVar 7} codePoint7 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 7." ::={whispBoxCPVar 8} codePoint8 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 8." ::={whispBoxCPVar 9} codePoint9 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 9." ::={whispBoxCPVar 10} codePoint10 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 10." ::={whispBoxCPVar 11} codePoint11 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 11." ::={whispBoxCPVar 12} codePoint12 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 12." ::={whispBoxCPVar 13} codePoint13 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 13." ::={whispBoxCPVar 14} codePoint14 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 14." ::={whispBoxCPVar 15} codePoint15 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 15." ::={whispBoxCPVar 16} codePoint16 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 16." ::={whispBoxCPVar 17} codePoint17 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 17." ::={whispBoxCPVar 18} codePoint18 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 18." ::={whispBoxCPVar 19} codePoint19 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 19." ::={whispBoxCPVar 20} codePoint20 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 20." ::={whispBoxCPVar 21} codePoint21 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 21." ::={whispBoxCPVar 22} codePoint22 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 22." ::={whispBoxCPVar 23} codePoint23 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 23." ::={whispBoxCPVar 24} codePoint24 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 24." ::={whispBoxCPVar 25} codePoint25 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 25." ::={whispBoxCPVar 26} codePoint26 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 26." ::={whispBoxCPVar 27} codePoint27 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 27." ::={whispBoxCPVar 28} codePoint28 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 28." ::={whispBoxCPVar 29} codePoint29 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 29." ::={whispBoxCPVar 30} codePoint30 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 30." ::={whispBoxCPVar 31} codePoint31 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 31." ::={whispBoxCPVar 32} codePoint32 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 32." ::={whispBoxCPVar 33} codePoint33 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 33." ::={whispBoxCPVar 34} codePoint34 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 34." ::={whispBoxCPVar 35} codePoint35 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 35." ::={whispBoxCPVar 36} codePoint36 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 36." ::={whispBoxCPVar 37} codePoint37 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 37." ::={whispBoxCPVar 38} codePoint38 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 38." ::={whispBoxCPVar 39} codePoint39 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 39." ::={whispBoxCPVar 40} codePoint40 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 40." ::={whispBoxCPVar 41} codePoint41 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 41." ::={whispBoxCPVar 42} codePoint42 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 42." ::={whispBoxCPVar 43} codePoint43 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 43." ::={whispBoxCPVar 44} codePoint44 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 44." ::={whispBoxCPVar 45} codePoint45 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 45." ::={whispBoxCPVar 46} codePoint46 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 46." ::={whispBoxCPVar 47} codePoint47 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 47." ::={whispBoxCPVar 48} codePoint48 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Code Point 48." ::={whispBoxCPVar 49} codePoint49 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 49." ::={whispBoxCPVar 50} codePoint50 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 50." ::={whispBoxCPVar 51} codePoint51 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 51." ::={whispBoxCPVar 52} codePoint52 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 52." ::={whispBoxCPVar 53} codePoint53 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 53." ::={whispBoxCPVar 54} codePoint54 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 54." ::={whispBoxCPVar 55} codePoint55 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 55." ::={whispBoxCPVar 56} codePoint56 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Code Point 56." ::={whispBoxCPVar 57} codePoint57 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 57." ::={whispBoxCPVar 58} codePoint58 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 58." ::={whispBoxCPVar 59} codePoint59 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 59." ::={whispBoxCPVar 60} codePoint60 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 60." ::={whispBoxCPVar 61} codePoint61 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 61." ::={whispBoxCPVar 62} codePoint62 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 62." ::={whispBoxCPVar 63} codePoint63 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Code Point 63." ::={whispBoxCPVar 64} -- Lan1 DHCP Client Event on AP or SM (with NAT disabled) boxLan1DHCPClientEvent NOTIFICATION-TYPE OBJECTS { dhcpLanIp, whispBoxEsn} STATUS current DESCRIPTION "Lan1 DHCP Client has received a new address via DHCP" ::={whispBoxDHCPClientEvent 1} dnsIpState OBJECT-TYPE SYNTAX INTEGER { manual(0), automatic(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration for DNS server IP addresses of the management interface are learned: 0 : Manual, must configure dnsPrimaryMgmtIP and dnsAlternateMgmtIP 1 : Automatic, DNS servers IP addresses are learned from DHCP response of the interface" ::={whispBoxDNS 1} dnsPrimaryMgmtIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Primary DNS IP address for the management interface." ::={whispBoxDNS 2} dnsAlternateMgmtIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Secondary DNS IP address for the management interface." ::={whispBoxDNS 3} dnsMgmtDomainName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Domain Name to use for management DNS configuration. This domain name may be concatonated to DNS names used configured for the management interface." ::={whispBoxDNS 4} trapDomainNameAppend OBJECT-TYPE SYNTAX INTEGER { disableDomain(0), appendDomain(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Select whether to append the configured management domain name to the configured trap names. For example, if dnsMgmtDomainName is set to 'example.com', trap1 is set to 'trap1', and trapDomainNameAppend is set to appendDomain, the trap1 name used would be 'trap1.example.com'." ::={whispBoxDNS 5} trap1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap IP Address 1. Format is either an IP address or DNS name." ::={whispBoxDNS 6} trap2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap IP Address 2. Format is either an IP address or DNS name." ::={whispBoxDNS 7} trap3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap IP Address 3. Format is either an IP address or DNS name." ::={whispBoxDNS 8} trap4 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap IP Address 4. Format is either an IP address or DNS name." ::={whispBoxDNS 9} trap5 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap IP Address 5. Format is either an IP address or DNS name." ::={whispBoxDNS 10} trap6 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap IP Address 6. Format is either an IP address or DNS name." ::={whispBoxDNS 11} trap7 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap IP Address 7. Format is either an IP address or DNS name." ::={whispBoxDNS 12} trap8 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap IP Address 8. Format is either an IP address or DNS name." ::={whispBoxDNS 13} trap9 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap IP Address 9. Format is either an IP address or DNS name." ::={whispBoxDNS 14} trap10 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP Trap IP Address 10. Format is either an IP address or DNS name." ::={whispBoxDNS 15} whispBoxRFPhysicalRadios OBJECT-TYPE SYNTAX SEQUENCE OF WhispBoxRFPhysicalRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio information table." ::= {whispBoxRFPhysical 1} whispBoxRFPhysicalRadioEntry OBJECT-TYPE SYNTAX WhispBoxRFPhysicalRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio information table entry." INDEX {radioIndex} ::= {whispBoxRFPhysicalRadios 1} WhispBoxRFPhysicalRadioEntry ::= SEQUENCE{ radioIndex INTEGER, radioType INTEGER, radioPaths INTEGER } radioIndex OBJECT-TYPE SYNTAX INTEGER (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Index." ::={whispBoxRFPhysicalRadioEntry 1} radioType OBJECT-TYPE SYNTAX INTEGER { fsk(0), ofdm(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the radio is FSK or OFDM." ::={whispBoxRFPhysicalRadioEntry 2} radioPaths OBJECT-TYPE SYNTAX INTEGER (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates number of paths. For FSK or OFDM (non-MIMO), this is 1. For MIMO, it can be greater (with a current maximum of 2)." ::={whispBoxRFPhysicalRadioEntry 3} whispBoxRFPhysicalRadioPaths OBJECT-TYPE SYNTAX SEQUENCE OF WhispBoxRFPhysicalRadioPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio path information table." ::= {whispBoxRFPhysical 2} whispBoxRFPhysicalRadioPathEntry OBJECT-TYPE SYNTAX WhispBoxRFPhysicalRadioPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio path table entry." INDEX {radioIndex,pathIndex} ::= {whispBoxRFPhysicalRadioPaths 1} WhispBoxRFPhysicalRadioPathEntry ::= SEQUENCE{ pathIndex INTEGER } pathIndex OBJECT-TYPE SYNTAX INTEGER (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Path Index." ::={whispBoxRFPhysicalRadioPathEntry 1} whispBoxRFPhysicalRadioFrequencies OBJECT-TYPE SYNTAX SEQUENCE OF WhispBoxRFPhysicalRadioFrequencyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Available frequency information table." ::= {whispBoxRFPhysical 3} whispBoxRFPhysicalRadioFrequencyEntry OBJECT-TYPE SYNTAX WhispBoxRFPhysicalRadioFrequencyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Available frequency table entry." INDEX {radioIndex,frequency} ::= {whispBoxRFPhysicalRadioFrequencies 1} WhispBoxRFPhysicalRadioFrequencyEntry ::= SEQUENCE{ frequency INTEGER } frequency OBJECT-TYPE SYNTAX INTEGER (0..900000) MAX-ACCESS read-only STATUS current DESCRIPTION "Frequency." ::={whispBoxRFPhysicalRadioFrequencyEntry 1} whispBoxRFConfigRadios OBJECT-TYPE SYNTAX SEQUENCE OF WhispBoxRFConfigRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio configuration table." ::= {whispBoxRFConfig 1} whispBoxRFConfigRadioEntry OBJECT-TYPE SYNTAX WhispBoxRFConfigRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio config table entry." INDEX {radioConfigIndex} ::= {whispBoxRFConfigRadios 1} WhispBoxRFConfigRadioEntry ::= SEQUENCE{ radioConfigIndex INTEGER, radioFrequencyBand INTEGER } radioConfigIndex OBJECT-TYPE SYNTAX INTEGER (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Radio Config Index." ::={whispBoxRFConfigRadioEntry 1} radioFrequencyBand OBJECT-TYPE SYNTAX INTEGER { band700(0), band900(1), band2400(2), band3500(3), band3700(4), band4900(5), band5100(6), band5200(7), band5400(8), band5700(9), band5800(10), band5900(11), band6050(12)} MAX-ACCESS read-only STATUS current DESCRIPTION "Currently configured radio band." ::={whispBoxRFConfigRadioEntry 2} whispBoxBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF WhispBoxBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Bridge table." ::= {whispBox 4} whispBoxBridgeEntry OBJECT-TYPE SYNTAX WhispBoxBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Bridge entry." INDEX {whispBridgeMacAddr} ::= {whispBoxBridgeTable 1} WhispBoxBridgeEntry ::= SEQUENCE{ whispBridgeMacAddr MacAddress, whispBridgeDesLuid WhispLUID, whispBridgeAge INTEGER, whispBridgeExt INTEGER, whispBridgeHash INTEGER, whispBridgeCAM INTEGER } whispBridgeMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC Address of the registered enity." ::={whispBoxBridgeEntry 1} whispBridgeDesLuid OBJECT-TYPE SYNTAX WhispLUID MAX-ACCESS read-only STATUS current DESCRIPTION "This is the Local Unit Identifier assigned to Subscriber Modems." ::={whispBoxBridgeEntry 2} whispBridgeAge OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Table entry last access age in minutes." ::={whispBoxBridgeEntry 3} whispBridgeExt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Timeout extension flag for entries which also reside in the PNA APR cache." ::={whispBoxBridgeEntry 4} whispBridgeHash OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Hash table array index." ::={whispBoxBridgeEntry 5} whispBridgeCAM OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This entry is deprecated." ::={whispBoxBridgeEntry 6} whispVLANTable OBJECT-TYPE SYNTAX SEQUENCE OF WhispVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN member table." ::= {whispBox 8} whispVLANEntry OBJECT-TYPE SYNTAX WhispVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN entry." INDEX {whispVID} ::= {whispVLANTable 1} WhispVLANEntry ::= SEQUENCE{ whispVID INTEGER, whispVType DisplayString, whispVAge INTEGER } whispVID OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN member ID." ::={whispVLANEntry 1} whispVType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN member type." ::={whispVLANEntry 2} whispVAge OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN member age." ::={whispVLANEntry 3} whispUserTable OBJECT-TYPE SYNTAX SEQUENCE OF WhispUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "User information table." ::= {whispBox 10} whispUserEntry OBJECT-TYPE SYNTAX WhispUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "User entry." INDEX {entryIndex} ::= {whispUserTable 1} WhispUserEntry ::= SEQUENCE{ entryIndex INTEGER, userLoginName DisplayString, userPswd DisplayString, accessLevel INTEGER, loginStatus INTEGER, loginMethod INTEGER, sessionTime INTEGER } entryIndex OBJECT-TYPE SYNTAX INTEGER (1..5) MAX-ACCESS read-only STATUS current DESCRIPTION "User information table index." ::={whispUserEntry 1} userLoginName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "User name." ::={whispUserEntry 2} userPswd OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "User password." ::={whispUserEntry 3} accessLevel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "User access level." ::={whispUserEntry 4} loginStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "User current status." ::={whispUserEntry 5} loginMethod OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "User login method." ::={whispUserEntry 6} sessionTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Users logged in session time." ::={whispUserEntry 7} whispLayer2NeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF WhispLayer2NeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Neighbor information table." ::= {whispBox 11} whispLayer2NeighborEntry OBJECT-TYPE SYNTAX WhispLayer2NeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Neighbor Entry." INDEX {entryL2Index} ::= {whispLayer2NeighborTable 1} WhispLayer2NeighborEntry ::= SEQUENCE{ entryL2Index INTEGER, neighborMAC DisplayString, neighborIP DisplayString, neighborSiteName DisplayString } entryL2Index OBJECT-TYPE SYNTAX INTEGER (1..20) MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbor information table index." ::={whispLayer2NeighborEntry 1} neighborMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbor MAC." ::={whispLayer2NeighborEntry 2} neighborIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbor IP." ::={whispLayer2NeighborEntry 3} neighborSiteName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Neighbor Site Name." ::={whispLayer2NeighborEntry 4} END