source: Alerting/Transports.md path: blob/master/doc/ # Transports Transports are located within `LibreNMS/Alert/Transport/` and can be configured within the WebUI under Alerts -> Alert Transports. Contacts will be gathered automatically and passed to the configured transports. By default the Contacts will be only gathered when the alert triggers and will ignore future changes in contacts for the incident. If you want contacts to be re-gathered before each dispatch, please set 'Updates to contact email addresses not honored' to Off in the WebUI. The contacts will always include the `SysContact` defined in the Device's SNMP configuration and also every LibreNMS user that has at least `read`-permissions on the entity that is to be alerted. At the moment LibreNMS only supports Port or Device permissions. You can exclude the `SysContact` by toggling 'Issue alerts to sysContact'. To include users that have `Global-Read`, `Administrator` or `Normal-User` permissions it is required to toggle the options: - Issue alerts to admins. - Issue alerts to read only users - Issue alerts to normal users. ## Using a Proxy [Proxy Configuration](../Support/Configuration.md#proxy-support) ## Using a AMQP based Transport You need to install an additional php module : `bcmath` (eg `php72w-bcmath` for Centos 7) ## Alertmanager Alertmanager is an alert handling software, initially developed for alert processing sent by Prometheus. It has built-in functionality for deduplicating, grouping and routing alerts based on configurable criteria. LibreNMS uses alert grouping by alert rule, which can produce an array of alerts of similar content for an array of hosts, whereas Alertmanager can group them by alert meta, ideally producing one single notice in case an issue occurs. It is possible to configure as much label values as required in Alertmanager Options section. Every label and it's value should be entered as a new line. [Alertmanager Docs](https://prometheus.io/docs/alerting/alertmanager/) **Example:** | Config | Example | | ------ | ------- | | Alertmanager URL | http://alertmanager.example.com | | Alertmanager Options: | source=librenms
customlabel=value | ## API The API transport allows to reach any service provider using POST, PUT or GET URLs (Like SMS provider, etc). It can be used in multiple ways: - The same text built from the Alert template is available in the variable ``` $msg ```, which can then be sent as an option to the API. Be carefull that HTTP GET requests are usually limited in length. - The API-Option fields can be directly built from the variables defined in [Template-Syntax](Templates.md#syntax) but without the 'alert->' prefix. For instance, ``` $alert->uptime ``` is available as ``` $uptime ``` in the API transport - The API-Headers allows you to add the headers that the api endpoint requires. - The API-body allow sending data in the format required by the ApI endpoint. A few variables commonly used : | Variable | Description | | ------------------ | ----------- | | {{ $hostname }} | Hostname | | {{ $sysName }} | SysName | | {{ $sysDescr }} | SysDescr | | {{ $os }} | OS of device (librenms defined) | | {{ $type }} | Type of device (librenms defined) | | {{ $ip }} | IP Address | | {{ $hardware }} | Hardware | | {{ $version }} | Version | | {{ $uptime }} | Uptime in seconds | | {{ $uptime_short }} | Uptime in human-readable format | | {{ $timestamp }} | Timestamp of alert | | {{ $description }} | Description of device | | {{ $title }} | Title (as built from the Alert Template) | | {{ $msg }} | Body text (as built from the Alert Template) | **Example:** The example below will use the API named sms-api of my.example.com and send the title of the alert to the provided number using the provided service key. Refer to your service documentation to configure it properly. | Config | Example | | ------ | ------- | | API Method | GET | | API URL | | API Options | rcpt=0123456789
key=0987654321abcdef
msg=(LNMS) {{ $title }} | | API Username | myUsername | | API Password | myPassword | The example below will use the API named wall-display of my.example.com and send the title and text of the alert to a screen in the Network Operation Center. | Config | Example | | ------ | ------- | | API Method | POST | | API URL | | API Options | title={{ $title }}
msg={{ $msg }}| The example below will use the API named component of my.example.com with id 1, body as json status value and headers send token authentication and content type required. | Config | Example | | ------ | ------- | | API Method | PUT | | API URL | http://my.example.com/comonent/1 | API Headers | X-Token=HASH | | Content-Type=application/json | API Body | { "status": 2 } ## Boxcar Copy your access token from the Boxcar app or from the Boxcar.io website and setup the transport. [Boxcar Docs](http://developer.boxcar.io/api/publisher/) **Example:** | Config | Example | | ------ | ------- | | Access Token | i23f23mr23rwerw | ## Canopsis Canopsis is a hypervision tool. LibreNMS can send alerts to Canopsis which are then converted to canopsis events. [Canopsis Docs](https://doc.canopsis.net/guide-developpement/struct-event/) **Example:** | Config | Example | | ------ | ------- | | Hostname | www.xxx.yyy.zzz | | Port Number | 5672 | | User | admin | | Password | my_password | | Vhost | canopsis | ## Cisco Spark (aka Webex Teams) Cisco Spark (now known as Webex Teams). LibreNMS can send alerts to a Cisco Spark room. To make this possible you need to have a RoomID and a token. You can also choose to send alerts using Markdown syntax. Enabling this option provides for more richly formatted alerts, but be sure to adjust your alert template to account for the Markdown syntax. For more information about Cisco Spark RoomID and token, take a look here : - [Getting started](https://developer.ciscospark.com/getting-started.html) - [Rooms](https://developer.ciscospark.com/resource-rooms.html) **Example:** | Config | Example | | ------ | ------- | | API Token | ASd23r23edewda | | RoomID | 34243243251 | | Use Markdown? | x | ## Clickatell Clickatell provides a REST-API requiring an Authorization-Token and at least one Cellphone number. [Clickatell Docs](https://www.clickatell.com/developers/api-documentation/rest-api-request-parameters/) Here an example using 3 numbers, any amount of numbers is supported: **Example:** | Config | Example | | ------ | ------- | | Token | dsaWd3rewdwea | | Mobile Numbers | +1234567890,+1234567891,+1234567892 | ## Discord The Discord transport will POST the alert message to your Discord Incoming WebHook. Simple html tags are stripped from the message. The only required value is for url, without this no call to Discord will be made. The Options field supports the JSON/Form Params listed in the Discord Docs below. [Discord Docs](https://discordapp.com/developers/docs/resources/webhook#execute-webhook) **Example:** | Config | Example | | ------ | ------- | | Discord URL | | | Options | username=myname | ## Elasticsearch You can have LibreNMS send alerts to an elasticsearch database. Each fault will be sent as a separate document. The index pattern uses strftime() formatting. **Example:** | Config | Example | | ------ | ------- | | Host | 127.0.0.1 | | Port | 9200 | | Index Patter | librenms-%Y.%m.%d | ## Gitlab LibreNMS will create issues for warning and critical level alerts however only title and description are set. Uses Personal access tokens to authenticate with Gitlab and will store the token in cleartext. **Example:** | Config | Example | | ------ | ------- | | Host | | | Project ID | 1 | | Personal Access Token | AbCdEf12345 | ## HipChat See the HipChat API Documentation for [rooms/message](https://www.hipchat.com/docs/api/method/rooms/message) for details on acceptable values. > You may notice that the link points at the "deprecated" v1 API. This is > because the v2 API is still in beta. **Example:** | Config | Example | | ------ | ------- | | API URL | | | Room ID | 7654321 | | From Name | LibreNMS | | Options | color = red
notify = 1
message_format = text | At present the following options are supported: `color`, `notify` and `message_format`. > Note: The default message format for HipChat messages is HTML. It is > recommended that you specify the `text` message format to prevent unexpected > results, such as HipChat attempting to interpret angled brackets (`<` and > `>`). ## IRC The IRC transports only works together with the LibreNMS IRC-Bot. Configuration of the LibreNMS IRC-Bot is described [here](https://github.com/librenms/librenms/blob/master/doc/Extensions/IRC-Bot.md). **Example:** | Config | Example | | ------ | ------- | | IRC | enabled | ## JIRA You can have LibreNMS create issues on a Jira instance for critical and warning alerts. The Jira transport only sets summary and description fields. Therefore your Jira project must not have any other mandatory field for the provided issuetype. The config fields that need to set are Jira URL, Jira username, Jira password, Project key, and issue type. Currently http authentication is used to access Jira and Jira username and password will be stored as cleartext in the LibreNMS database. [Jira Issue Types](https://confluence.atlassian.com/adminjiracloud/issue-types-844500742.html) **Example:** | Config | Example | | ------ | ------- | | URL | | | Project Key | JIRAPROJECTKEY | | Issue Type | Myissuetype | | Jira Username | myjirauser | | Jira Password | myjirapass | ## LINE Notify [LINE Notify](https://notify-bot.line.me/) [LINE Notify API Document](https://notify-bot.line.me/doc/) **Example:** | Config | Example | | ------ | ------- | | Token | AbCdEf12345 | ## Mail The E-Mail transports uses the same email-configuration like the rest of LibreNMS. As a small reminder, here is it's configuration directives including defaults: **Example:** | Config | Example | | ------ | ------- | | Email | me@example.com | ## Microsoft Teams Microsoft Teams. LibreNMS can send alerts to Microsoft Teams Connector API which are then posted to a specific channel. **Example:** | Config | Example | | ------ | ------- | | WebHook URL | | ## Nagios Compatible The nagios transport will feed a FIFO at the defined location with the same format that nagios would. This allows you to use other alerting systems with LibreNMS, for example [Flapjack](http://flapjack.io). **Example:** | Config | Example | | ------ | ------- | | Nagios FIFO | /path/to/my.fifo | ## OpsGenie Using OpsGenie LibreNMS integration, LibreNMS forwards alerts to OpsGenie with detailed information. OpsGenie acts as a dispatcher for LibreNMS alerts, determines the right people to notify based on on-call schedules and notifies via email, text messages (SMS), phone calls and iOS & Android push notifications. Then escalates alerts until the alert is acknowledged or closed. Create a [LibreNMS Integration](https://docs.opsgenie.com/docs/librenms-integration) from the integrations page once you signup. Then copy the API key from OpsGenie to LibreNMS. If you want to automatically ack and close alerts, leverage Marid integration. More detail with screenshots is available in [OpsGenie LibreNMS Integration page](https://docs.opsgenie.com/docs/librenms-integration). **Example:** | Config | Example | | ------ | ------- | | WebHook URL | | ## osTicket LibreNMS can send alerts to osTicket API which are then converted to osTicket tickets. **Example:** | Config | Example | | ------ | ------- | | API URL | | | API Token | 123456789 | ## PagerDuty LibreNMS can make use of PagerDuty, this is done by utilizing an API key and Integraton Key. API Keys can be found under 'API Access' in the PagerDuty portal. Integration Keys can be found under 'Integration' for the particular Service you have created in the PagerDuty portal. **Example:** | Config | Example | | ------ | ------- | | API Key | randomsample | | Integration Key | somerandomstring | ## Philips Hue Want to spice up your noc life? LibreNMS will flash all lights connected to your philips hue bridge whenever an alert is triggered. To setup, go to the you - Update the "URL:" field to `/api` - Paste this in the "Message Body" {"devicetype":"librenms"} - Press the round button on your `philips Hue Bridge` - Click on `POST` - In the `Command Response` You should see output with your username. Copy this without the quotes More Info: [Philips Hue Documentation](https://www.developers.meethue.com/documentation/getting-started) **Example:** | Config | Example | | ------ | ------- | | Host | http://your-bridge-ip | | Hue User | username | | Duration | 1 Second | ## PlaySMS PlaySMS is an open source SMS-Gateway that can be used via their HTTP API using a Username and WebService Token. Please consult PlaySMS's documentation regarding number formatting. [PlaySMS Docs](https://github.com/antonraharja/playSMS/blob/master/documents/development/WEBSERVICES.md) Here an example using 3 numbers, any amount of numbers is supported: **Example:** | Config | Example | | ------ | ------- | | PlaySMS | | | User | user1 | | Token | MYFANCYACCESSTOKEN | | From | My Name | | Mobiles | +1234567892,+1234567890,+1234567891 | ## Pushbullet Get your Access Token from your Pushbullet's settings page and set it in your transport: **Example:** | Config | Example | | ------ | ------- | | Access Token | MYFANCYACCESSTOKEN | ## Pushover If you want to change the default [notification sound](https://pushover.net/api#sounds) for all notifications then you can add the following in Pushover Options: `sound=falling` You also have the possibility to change sound per severity: `sound_critical=falling` `sound_warning=siren` `sound_ok=magic` Enabling Pushover support is fairly easy, there are only two required parameters. Firstly you need to create a new Application (called LibreNMS, for example) in your account on the Pushover website ([https://pushover.net/apps](https://pushover.net/apps)). Now copy your API Key and obtain your User Key from the newly created Application and setup the transport. [Pushover Docs](https://pushover.net/api) **Example:** | Config | Example | | ------ | ------- | | Api Key | APPLICATIONAPIKEYGOESHERE | | User Key | USERKEYGOESHERE | | Pushover Options | sound_critical=falling
sound_warning=siren
sound_ok=magic | ## Rocket.chat The Rocket.chat transport will POST the alert message to your Rocket.chat Incoming WebHook using the attachments option. Simple html tags are stripped from the message. All options are optional, the only required value is for url, without this then no call to Rocket.chat will be made. [Rocket.chat Docs](https://rocket.chat/docs/developer-guides/rest-api/chat/postmessage) **Example:** | Config | Example | | ------ | ------- | | Webhook URL | https://rocket.url/api/v1/chat.postMessage | | Rocket.chat Options | channel=#Alerting
username=myname
icon_url=http://someurl/image.gif
icon_emoji=:smirk: | ## Slack The Slack transport will POST the alert message to your Slack Incoming WebHook using the attachments option, you are able to specify multiple webhooks along with the relevant options to go with it. Simple html tags are stripped from the message. All options are optional, the only required value is for url, without this then no call to Slack will be made. We currently support the following attachment options: `author_name` [Slack docs](https://api.slack.com/docs/message-attachments) **Example:** | Config | Example | | ------ | ------- | | Webhook URL | | | Slack Options | author_name=Me | ## SMSEagle SMSEagle is a hardware SMS Gateway that can be used via their HTTP API using a Username and password. Destination numbers are one per line, with no spaces. They can be in either local or international dialling format. [SMSEagle Docs](http://www.smseagle.eu) **Example:** | Config | Example | | ------ | ------- | | SMSEagle Host | ip.add.re.ss | | User | smseagle_user | | Password | smseagle_user_password | | Mobiles | +3534567890
0834567891 | ## Syslog You can have LibreNMS emit alerts as syslogs complying with RFC 3164. More information on RFC 3164 can be found here: [https://tools.ietf.org/html/rfc3164](https://tools.ietf.org/html/rfc3164) Example output: `<26> Mar 22 00:59:03 librenms.host.net librenms[233]: [Critical] network.device.net: Port Down - port_id => 98939; ifDescr => xe-1/1/0;` Each fault will be sent as a separate syslog. **Example:** | Config | Example | | ------ | ------- | | Host | 127.0.0.1 | | Port | 514 | | Facility | 3 | ## Telegram > Thank you to [snis](https://github.com/snis) for these instructions. 1. First you must create a telegram account and add BotFather to you list. To do this click on the following url: [https://telegram.me/botfather](https://telegram.me/botfather) 1. Generate a new bot with the command "/newbot" BotFather is then asking for a username and a normal name. After that your bot is created and you get a HTTP token. (for more options for your bot type "/help") 1. Add your bot to telegram with the following url: `http://telegram.me/` to use app or `https://web.telegram.org/` to use in web, and send some text to the bot. 1. The BotFather should have responded with a token, copy your token code and go to the following page in chrome: `https://api.telegram.org/bot/getUpdates` (this could take a while so continue to refresh until you see something similar to below) 1. You see a json code with the message you sent to the bot. Copy the Chat id. In this example that is “-9787468” within this example: `"message":{"message_id":7,"from":"id":656556,"first_name":"Joo","last_name":"Doo","username":"JohnDoo"},"chat":{"id":-9787468,"title":"Telegram Group"},"date":1435216924,"text":"Hi"}}]}`. 1. Now create a new "Telegram transport" in LibreNMS (Global Settings -> Alerting Settings -> Telegram transport). Click on 'Add Telegram config' and put your chat id and token into the relevant box. 1. If want to use a group to receive alerts, you need to pick the Chat ID of the group chat, and not of the Bot itself. [Telegram Docs](https://core.telegram.org/api) **Example:** | Config | Example | | ------ | ------- | | Chat ID | 34243432 | | Token | 3ed32wwf235234 | | Format | HTML or MARKDOWN | ## Twilio SMS Twilio will send your alert via SMS. From your Twilio account you will need your account SID, account token and your Twilio SMS phone number that you would like to send the alerts from. Twilio's APIs are located at: [https://www.twilio.com/docs/api?filter-product=sms](https://www.twilio.com/docs/api?filter-product=sms) **Example:** | Config | Example | | ------ | ------- | | SID | ACxxxxxxxxxxxxxxxxxxxxxxxxxxxx | | Token | 7xxxx573acxxxbc2xxx308d6xxx652d32 | | Twilio SMS Number | 8888778660 | ## VictorOps VictorOps provide a webHook url to make integration extremely simple. To get the URL required login to your VictorOps account and go to: Settings -> Integrations -> REST Endpoint -> Enable Integration. The URL provided will have $routing_key at the end, you need to change this to something that is unique to the system sending the alerts such as librenms. I.e: `https://alert.victorops.com/integrations/generic/20132414/alert/2f974ce1-08fc-4dg8-a4f4-9aee6cf35c98/librenms` **Example:** | Config | Example | | ------ | ------- | | Post URL | | ## Kayako Classic LibreNMS can send alerts to Kayako Classic API which are then converted to tickets. To use this module, you need REST API feature enabled in Kayako Classic and configured email account at LibreNMS. To enable this, do this: AdminCP -> REST API -> Settings -> Enable API (Yes) Also you need to know the department id to provide tickets to appropriate department and a user email to provide, which is used as ticket author. To get department id: navigate to appropriate department name at the departments list page in Admin CP and watch the number at the end of url. Example: . Department ID is 17 As a requirement, you have to know API Url, API Key and API Secret to connect to servicedesk [Kayako REST API Docs](https://classic.kayako.com/article/1502-kayako-rest-api) **Example:** | Config | Example | | ------ | ------- | | Kayako URL | | | Kayako API Key | 8cc02f38-7465-4a0c-8730-bb3af122167b | | Kayako API Secret | Y2NhZDIxNDMtNjVkMi0wYzE0LWExYTUtZGUwMjJiZDI0ZWEzMmRhOGNiYWMtNTU2YS0yODk0LTA1MTEtN2VhN2YzYzgzZjk5 | | Kayako Department | 1 | ## SMSFeedback SMSFeedback is a SAAS service, which can be used to deliver Alerts via API, using API url, Username & Password. They can be in international dialling format only. [SMSFeedback Api Docs](https://www.smsfeedback.ru/smsapi/) **Example:** | Config | Example | | ------ | ------- | | User | smsfeedback_user | | Password | smsfeedback_password | | Mobiles | 71234567890 | | Sender name| CIA |