-- -- whisp-aps-mib.mib -- GENERATED FROM ui_db.xml -- -- ******************************************************************************************************* -- Copyright 2005-2013 (c), Cambium Networks -- Cambium Networks Confidential Proprietary -- ******************************************************************************************************* -- -- Canopy Access Point and Backhaul Timing Master specific MIB definitions. -- -- ******************************************************************************************************** WHISP-APS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, Gauge32, IpAddress, NOTIFICATION-TYPE, TimeTicks, Unsigned32 FROM SNMPv2-SMI DisplayString, PhysAddress, MacAddress FROM SNMPv2-TC OBJECT-GROUP FROM SNMPv2-CONF WhispLUID, WhispMACAddress, EventString FROM WHISP-TCV2-MIB whispModules, whispBox, whispAps FROM WHISP-GLOBAL-REG-MIB whispBoxEsn, whispBoxRFPhysicalRadioEntry FROM WHISP-BOX-MIBV2-MIB ; whispApsMibModule MODULE-IDENTITY LAST-UPDATED "200304150000Z" ORGANIZATION "Cambium Networks" CONTACT-INFO "Canopy Technical Support email: technical-support@canopywireless.com" DESCRIPTION "This module contains MIB definitions for APs." ::= {whispModules 12} -- ------------------------------------------------------------------------- -- Top Level Registrations whispApsConfig OBJECT IDENTIFIER ::= {whispAps 1} whispApsLink OBJECT IDENTIFIER ::= {whispAps 2} whispApsLinkTestConfig OBJECT IDENTIFIER ::= {whispApsLink 1} whispApsLinkTestResult OBJECT IDENTIFIER ::= {whispApsLink 2} whispApsGPS OBJECT IDENTIFIER ::= {whispAps 3} whispApsEvent OBJECT IDENTIFIER ::= {whispAps 5} whispApsRegEvent OBJECT IDENTIFIER ::= {whispApsEvent 1} whispGPSEvent OBJECT IDENTIFIER ::= {whispApsEvent 2} whispApsDfsEvent OBJECT IDENTIFIER ::= {whispApsEvent 3} whispApRegulatoryEvent OBJECT IDENTIFIER ::= {whispApsEvent 4} whispApRFOverloadEvent OBJECT IDENTIFIER ::= {whispApsEvent 5} whispApsGroups OBJECT IDENTIFIER ::= {whispAps 6} whispApsStatus OBJECT IDENTIFIER ::= {whispAps 7} whispApsDNS OBJECT IDENTIFIER ::= {whispAps 9} whispApsControls OBJECT IDENTIFIER ::= {whispAps 11} whispApsRFConfig OBJECT IDENTIFIER ::= {whispAps 10} -- ------------------------------------------------------------------------- gpsInput OBJECT-TYPE SYNTAX INTEGER { generateSyncSignal(0), syncToReceivedSignalTimingPort(1), syncToReceivedSignalPowerPort(2)} MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The variable is deprecated. See gpsInput in whispBoxConfig." ::={whispApsConfig 1} rfFreqCarrier OBJECT-TYPE SYNTAX INTEGER { wired(0)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The variable is deprecated. Please see radioFreqCarrier." ::={whispApsConfig 2} apLinkSpeed OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The variable is deprecated." ::={whispApsConfig 3} dwnLnkData OBJECT-TYPE SYNTAX INTEGER (1..99) UNITS "%" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute is deprecated. Please see radioDownlinkPercent." ::={whispApsConfig 4} highPriorityUpLnkPct OBJECT-TYPE SYNTAX INTEGER (0..99) UNITS "%" MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Percentage of uplink slots for high priority data." ::={whispApsConfig 5} numUAckSlots OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Total number of upstream ack slots." ::={whispApsConfig 6} uAcksReservHigh OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Total number of upstream high priority ack slots" ::={whispApsConfig 7} numDAckSlots OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Total number of downstream ack slots." ::={whispApsConfig 8} dAcksReservHigh OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Total number of high priority downstream ack slots." ::={whispApsConfig 9} numCtlSlots OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This OID is deprecated, please use numCtlSlotsHW." ::={whispApsConfig 10} numCtlSlotsReserveHigh OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Total number of High priority upstream control (contention) slots." ::={whispApsConfig 11} upLnkDataRate OBJECT-TYPE SYNTAX INTEGER UNITS "Kilobits/sec" MAX-ACCESS read-write STATUS current DESCRIPTION "Sustained uplink bandwidth cap." ::={whispApsConfig 12} upLnkLimit OBJECT-TYPE SYNTAX INTEGER UNITS "Kilobits/sec" MAX-ACCESS read-write STATUS current DESCRIPTION "Burst uplink bandwidth cap." ::={whispApsConfig 13} dwnLnkDataRate OBJECT-TYPE SYNTAX INTEGER UNITS "Kilobits/sec" MAX-ACCESS read-write STATUS current DESCRIPTION "Sustained downlink bandwidth cap." ::={whispApsConfig 14} dwnLnkLimit OBJECT-TYPE SYNTAX INTEGER UNITS "Kilobits/sec" MAX-ACCESS read-write STATUS current DESCRIPTION "Burst downlink bandwidth cap." ::={whispApsConfig 15} sectorID OBJECT-TYPE SYNTAX INTEGER (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Advertise sector number for an AP. Not supported for PMP450." ::={whispApsConfig 16} maxRange OBJECT-TYPE SYNTAX INTEGER UNITS "miles" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute is deprecated. Please see radioMaxRange." ::={whispApsConfig 17} airLinkSecurity OBJECT-TYPE SYNTAX INTEGER { standard(0), desEnhanced(1), desEnhancedAndAuthentication(2), authenticationIfAvailable(3)} MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Air Link Security. desEnhancedAndAuthentication(2) and authenticationIfAvailable(3) are only for APAS." ::={whispApsConfig 18} berMode OBJECT-TYPE SYNTAX INTEGER { berStream(0), noBerStream(1)} MAX-ACCESS read-write STATUS obsolete DESCRIPTION "AP backgroup BER mode." ::={whispApsConfig 19} asIP1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Configure with whispApsDNS.authServer1." ::={whispApsConfig 20} asIP2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Configure with whispApsDNS.authServer2." ::={whispApsConfig 21} asIP3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Configure with whispApsDNS.authServer3." ::={whispApsConfig 22} lanIpAp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "LAN IP." ::={whispApsConfig 23} lanMaskAp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "LAN subnet mask." ::={whispApsConfig 24} defaultGwAp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Default gateway" ::={whispApsConfig 25} privateIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Private IP." ::={whispApsConfig 26} gpsTrap OBJECT-TYPE SYNTAX INTEGER { gpsTrapDisabled(0), gpsTrapEnabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Variable to enable/disable GPS sync/out-sync traps." ::={whispApsConfig 27} regTrap OBJECT-TYPE SYNTAX INTEGER { regTrapDisabled(0), regTrapEnabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Variable to enable/disable registration complete/lost traps." ::={whispApsConfig 28} txSpreading OBJECT-TYPE SYNTAX INTEGER { txSpreadingDisabled(0), txSpreadingEnabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Variable to enable/disable Transmit Frame Spreading. This option is for FSK only." ::={whispApsConfig 29} apBeaconInfo OBJECT-TYPE SYNTAX INTEGER { enableApBeaconInfo(0), disableApBeaconInfo(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Variable to enable/disable displaying AP beacon info through AP eval." ::={whispApsConfig 30} authMode OBJECT-TYPE SYNTAX INTEGER { authenticationDisabled(0), authenticationRequiredBam(1), authenticationRequiredAP(3), authenticationRequiredAAA(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Variable to enable/disable authentication. The authentication optional mode is for APs only. This variable can only be set when authentication feature is enabled. Setting it to 1 will use a BAM server for authentication of SMs. Setting it to 2 will make use of the Authentication Key on the AP for authenticating SMs. The keys must match on SM and AP in order for the SM to be authenticated in this mode." ::={whispApsConfig 31} authKeyAp OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication key. It should be 32 character long. Can be used on MultiPoint AP if AP Authentication mode is selected. Otherwise, it is used on Backhauls." ::={whispApsConfig 32} encryptionMode OBJECT-TYPE SYNTAX INTEGER { encryptionDisabled(0), encryptionEnabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Variable to enable/disable encryption." ::={whispApsConfig 33} ntpServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Configure with whispApsDNS.ntpServer1, whispApsDNS.ntpServer2, and whispApsDNS.ntpServer3." ::={whispApsConfig 34} broadcastRetryCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Broadcast Repeat Count : Range 0 -- 2. For APs." ::={whispApsConfig 35} encryptDwBroadcast OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To enable or disable Encrypted Downlink Broadcast. For FSK APs." ::={whispApsConfig 36} updateAppAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Update Application Address." ::={whispApsConfig 37} dfsConfig OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS obsolete DESCRIPTION "To configure proper regions for Dynamic Frequency Shifting. For 5.2/5.4/5.7 GHz radios." ::={whispApsConfig 38} vlanEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To enable or disable VLAN." ::={whispApsConfig 39} configSource OBJECT-TYPE SYNTAX INTEGER { bam(0), sm(1), bamsm(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "To configure CIR, MIR and VLAN through SM or BAM." ::={whispApsConfig 40} apRateAdapt OBJECT-TYPE SYNTAX INTEGER { onex(0), onextwox(1), onextwoxthreex(2)} MAX-ACCESS read-write STATUS obsolete DESCRIPTION "To enable or disable double rate." ::={whispApsConfig 41} numCtlSlotsHW OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute is deprecated. Please see radioControlSlots." ::={whispApsConfig 42} displayAPEval OBJECT-TYPE SYNTAX INTEGER { enable(0), disable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "If enable, it allows display of AP Eval Data at the SM." ::={whispApsConfig 43} smIsolation OBJECT-TYPE SYNTAX INTEGER { smIsolationDisable(0), smIsolationDrop(1), smIsolationFwd(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "(0) -- Disable SM Isolation. (1) -- Enable SM Isolation by blocking SM destined packets. (2) -- Enable SM Isolation by forwarding SM packets upstream." ::={whispApsConfig 44} ipAccessFilterEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To enable or disable IP access filtering to Management functions. (0) - IP access will be allowed from all addresses. (1) - IP access will be controlled using allowedIPAccess1-3 entries." ::={whispApsConfig 45} allowedIPAccess1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Allow access to AP Management from this IP. 0 is default setting to allow from all IPs." ::={whispApsConfig 46} allowedIPAccess2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Allow access to AP Management from this IP. 0 is default setting to allow from all IPs." ::={whispApsConfig 47} allowedIPAccess3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Allow access to AP Management from this IP. 0 is default setting to allow from all IPs." ::={whispApsConfig 48} tslBridging OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "1 = We are performing Translation Bridging 0 = We are not." ::={whispApsConfig 49} untranslatedArp OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "1 = We are sending untranslated ARP response. 0 = We are not." ::={whispApsConfig 50} limitFreqBand900 OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "1 = We are limiting the freq band of 900 radios. 0 = We are not." ::={whispApsConfig 51} txPwrLevel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Deprecated, use 'transmitterOP' instead." ::={whispApsConfig 52} rfFreqCaralt1 OBJECT-TYPE SYNTAX INTEGER { none(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "First DFS Alternate RF Frequency. (Only available for DFS radios) Used as a backup frequency when Radar is detected on DFS enabled Radios. The frequencies are: 5.4 radios:(5475,5485,5490 OFDM only),5495,5500,5505,5510,5515,5520,5525, 5530,5535,5540,5545,5550,5555,5560,5565,5570,5575,5580,5585,5590,5595, 5600,5605,5610,5615,5620,5625,5630,5635,5640,5645,5650,5655,5660,5665, 5670,5675,5680,5685,5690,5695,5700,5705,(5710,5715 OFDM Only). (5.7 Platform 10 (SAL) radios with non-connectorized antennas do not support DFS) 5.7 radios:5745,5750,5755,5760,5765,5770,5775,5780,5785,5790,5795,5800,5805. 5.7 radios with ISM enabled :5735,5740,5745,5750,5755,5760,5765,5770,5775, 5780,5785,5790,5795,5800,5805,5810,5815,5820,5825,5830,5835,5840. 0: None." ::={whispApsConfig 53} rfFreqCaralt2 OBJECT-TYPE SYNTAX INTEGER { none(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Second DFS Alternate RF Frequency. (Only available for DFS radios) Used as a backup frequency when Radar is detected on DFS enabled Radios. The frequencies are: 5.4 radios:(5475,5485,5490 OFDM only),5495,5500,5505,5510,5515,5520,5525, 5530,5535,5540,5545,5550,5555,5560,5565,5570,5575,5580,5585,5590,5595, 5600,5605,5610,5615,5620,5625,5630,5635,5640,5645,5650,5655,5660,5665, 5670,5675,5680,5685,5690,5695,5700,5705,(5710,5715 OFDM Only). (5.7 Platform 10 (SAL) radios with non-connectorized antennas do not support DFS) 5.7 radios:5745,5750,5755,5760,5765,5770,5775,5780,5785,5790,5795,5800,5805. 5.7 radios with ISM enabled :5735,5740,5745,5750,5755,5760,5765,5770,5775, 5780,5785,5790,5795,5800,5805,5810,5815,5820,5825,5830,5835,5840. 0: None." ::={whispApsConfig 54} scheduleWhitening OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "1 = Schedule Whitening allowed. 0 = Schedule Whitening not allowed. This option is for FSK only" ::={whispApsConfig 55} remoteSpectrumAnalysisDuration OBJECT-TYPE SYNTAX INTEGER (10..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Value in seconds for a remote spectrum analysis on an SM. Range is 10-1000 seconds." ::={whispApsConfig 56} -- Perform Remote Spectrum Analysis on an LUID remoteSpectrumAnalyzerLUID OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Get will return always return 0. Set will start Remote Spectrum Analyzer on specified LUID. *Warning* This will cause the SM to disconnect from the AP! You will lose the session for the specified duration! If general error was returned then the LUID does not have an active session, or the SM does not support Remote Spectrum Analysis." ::={whispApsConfig 57} -- Allows BHS re-registration every 24 hours bhReReg OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Allows BHS re-registration every 24 hours. Enable allows re-registration and Disable does not. 24 Hour Encryption Refresh." ::={whispApsConfig 58} dlnkBcastCIR OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Downlink Broadcast CIR (kbps)" ::={whispApsConfig 59} verifyGPSChecksum OBJECT-TYPE SYNTAX INTEGER { doNotVerifyGPSMessageChecksum(0), verifyGPSMessageChecksum(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable verification of GPS message checksums." ::={whispApsConfig 60} apVlanOverride OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this option will cause an AP to retain its VLAN settings when turning it into an SM. It will be mostly helpful for running spectrum analysis on the AP. Since doing that requires the AP to be turned into an SM, enabling this option will allow you to keep the AP's VLAN configuration in place while the AP is running as an SM." ::={whispApsConfig 61} dhcpRelayAgentEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), fullRelay(1), option82Only(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or Disable MultiPoint AP acting as DHCP Relay Agent for all SMs and Clients underneath it. (0) - Relay Agent disabled - SM/CPE devices will perform DHCP normally (1) - Relay Agent enabled - AP will intercept DHCP DISCOVER message from SM and CPE, insert Option 82 containing SM's MAC address, and forward request to specified DHCP server." ::={whispApsConfig 62} dhcpRelayAgentSrvrIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Configure with whispApsDNS.dhcprServer." ::={whispApsConfig 63} colorCodeRescanTimer OBJECT-TYPE SYNTAX INTEGER (0..43200) MAX-ACCESS read-write STATUS current DESCRIPTION "Time in minutes for the subscriber to begin the idle timer. This timer will begin as soon as a session is started. This only fires if the device is in session with a non-primary color code. A value of zero (0) disables this timer (MultiPoint system Only)" ::={whispApsConfig 64} colorCodeRescanIdleTimer OBJECT-TYPE SYNTAX INTEGER (0..60) MAX-ACCESS read-write STATUS current DESCRIPTION "Time in minutes for the subscriber to check for an idle state. If an period has pass where no unicast RF traffic has occured (idle), then the subscriber will begin to rescan. This timer will wait until the timer set in colorCodeRescanTimer has expired before beginning. This timer only fires if the device is in session with a non-primary color code. A value of zero (0) mean to rescan without waiting for idle. (MultiPoint system Only)" ::={whispApsConfig 65} authKeyOptionAP OBJECT-TYPE SYNTAX INTEGER { useDefault(0), useKeySet(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "This option is for Multipoint APs only. This option will only be used if Authentication Mode is set to AP Pre-Shared Key. 0 - Use default key. 1 - Use set key." ::={whispApsConfig 66} asIP4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Configure with whispApsDNS.authServer4." ::={whispApsConfig 67} asIP5 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Configure with whispApsDNS.authServer5." ::={whispApsConfig 68} onlyAllowVer95OrAbove OBJECT-TYPE SYNTAX INTEGER { onlyAllowVer95OrAboveDisabled(0), onlyAllowVer95OrAboveEnabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Only allow subscribers that are running version 9.5 or above. Any radio that has a version below 9.5 will not be allowed to register." ::={whispApsConfig 69} apRxDelay OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This is used for engineering debug and needs to be removed or moved to eng MIB before releasing the MIB." ::={whispApsConfig 70} qinqEthType OBJECT-TYPE SYNTAX INTEGER { x88a8(0), x8100(1), x9100(2), x9200(3), x9300(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "EtherType for QinQ (802.1ad) outer tag (S-Tag). 0x88a8 by default." ::={whispApsConfig 71} fskSMTxPwrCntl OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable AP control of SM TX power. For FSK AP radios capable of Transmit Power Control." ::={whispApsConfig 72} fskSMRcvTargetLvl OBJECT-TYPE SYNTAX INTEGER (-80..-40) UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Desired SM Receive Level at AP (dBm, Range -40dBm to -80 dBm)." ::={whispApsConfig 73} authSharedSecret1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication Server 1 Shared Secret." ::={whispApsConfig 74} authSharedSecret2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication Server 2 Shared Secret." ::={whispApsConfig 75} authSharedSecret3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication Server 3 Shared Secret." ::={whispApsConfig 76} whispUsrAuthSharedSecret1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Use whispApsConfig.authSharedSecret1." ::={whispApsConfig 79} whispUsrAuthSharedSecret2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Use whispApsConfig.authSharedSecret2." ::={whispApsConfig 80} whispUsrAuthSharedSecret3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Use whispApsConfig.authSharedSecret3." ::={whispApsConfig 81} whispUsrAcctSvr1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Use whispApsDNS.authServer1." ::={whispApsConfig 82} whispUsrAcctSvr2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Use whispApsDNS.authServer2." ::={whispApsConfig 83} whispUsrAcctSvr3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Use whispApsDNS.authServer3." ::={whispApsConfig 84} whispUsrAuthPhase1 OBJECT-TYPE SYNTAX INTEGER { md5(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Select method for User Authentication" ::={whispApsConfig 85} whispWebUseAuthServer OBJECT-TYPE SYNTAX INTEGER { useRADIUSAccountingSvr(0), useRADIUSAuthenticationSvr(1)} MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Use whispApsDNS.authServer[1-3]." ::={whispApsConfig 86} dropSession OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "SM/BHS MAC Address to drop session from the AP/BHM." ::={whispApsConfig 87} uGPSPower OBJECT-TYPE SYNTAX INTEGER { off(0), on(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or Disable power supply to Universal GPS module (UGPS capable APs only, when GPS_output_enable is NOT set)." ::={whispApsConfig 88} timeZone OBJECT-TYPE SYNTAX INTEGER (0..124) MAX-ACCESS read-write STATUS current DESCRIPTION "Set the timezone offset for the radio. This change takes affect dynamically. The available timezones are: 0 : (UTC) UTC - Coordinated Universal Time 1 : (UTC) GMT - Greenwich Mean Time 2 : (UTC) WET - Western European Time 3 : (UTC-12) BIT - Baker Island Time 4 : (UTC-11) SST - Samoa Standard Time 5 : (UTC-10) CKT - Cook Island Time 6 : (UTC-10) HAST - Hawaii-Aleutian Standard Time 7 : (UTC-10) HST - Hawaii Standard Time 8 : (UTC-10) TAHT - Tahiti Time 9 : (UTC-09:30) MIT - Marquesas Islands Time 10 : (UTC-09) AKST - Alaska Standard Time 11 : (UTC-09) GIT - Gambier Island Time 12 : (UTC-09) HADT - Hawaii-Aleutian Daylight Time 13 : (UTC-08) AKDT - Alaska Daylight Time 14 : (UTC-08) CIST - Clipperton Island Standard Time 15 : (UTC-08) PST - Pacific Standard Time (North America) 16 : (UTC-07) MST - Mountain Standard Time (North America) 17 : (UTC-07) PDT - Pacific Daylight Time (North America) 18 : (UTC-06) CST - Central Standard Time (North America) 19 : (UTC-06) EAST - Easter Island Standard Time 20 : (UTC-06) GALT - Galapagos Time 21 : (UTC-06) MDT - Mountain Daylight Time (North America) 22 : (UTC-05) CDT - Central Daylight Time (North America) 23 : (UTC-05) COT - Colombia Time 24 : (UTC-05) ECT - Ecuador Time 25 : (UTC-05) EST - Eastern Standard Time (North America) 26 : (UTC-04:30) VET - Venezuelan Standard Time 27 : (UTC-04) AST - Atlantic Standard Time 28 : (UTC-04) BOT - Bolivia Time 29 : (UTC-04) CLT - Chile Standard Time 30 : (UTC-04) COST - Colombia Summer Time 31 : (UTC-04) ECT - Eastern Caribbean Time (does not recognise DST) 32 : (UTC-04) EDT - Eastern Daylight Time (North America) 33 : (UTC-04) FKT - Falkland Islands Time 34 : (UTC-04) GYT - Guyana Time 35 : (UTC-03:30) NST - Newfoundland Standard Time 36 : (UTC-03:30) NT - Newfoundland Time 37 : (UTC-03) ADT - Atlantic Daylight Time 38 : (UTC-03) ART - Argentina Time 39 : (UTC-03) BRT - Brasilia Time 40 : (UTC-03) CLST - Chile Summer Time 41 : (UTC-03) FKST - Falkland Islands Summer Time 42 : (UTC-03) GFT - French Guiana Time 43 : (UTC-03) UYT - Uruguay Standard Time 44 : (UTC-02:30) NDT - Newfoundland Daylight Time 45 : (UTC-02) GST - South Georgia and the South Sandwich Islands 46 : (UTC-02) UYST - Uruguay Summer Time 47 : (UTC-01) AZOST - Azores Standard Time 48 : (UTC-01) CVT - Cape Verde Time 49 : (UTC+01) BST - British Summer Time (British Standard Time from Feb 1968 to Oct 1971) 50 : (UTC+01) CET - Central European Time 51 : (UTC+01) DFT - AIX specific equivalent of Central European Time 52 : (UTC+01) IST - Irish Summer Time 53 : (UTC+01) WAT - West Africa Time 54 : (UTC+01) WEDT - Western European Daylight Time 55 : (UTC+01) WEST - Western European Summer Time 56 : (UTC+02) CAT - Central Africa Time 57 : (UTC+02) CEDT - Central European Daylight Time 58 : (UTC+02) CEST - Central European Summer Time 59 : (UTC+02) EET - Eastern European Time 60 : (UTC+02) IST - Israel Standard Time 61 : (UTC+02) SAST - South African Standard Time 62 : (UTC+03) AST - Arab Standard Time (Kuwait, Riyadh) 63 : (UTC+03) AST - Arabic Standard Time (Baghdad) 64 : (UTC+03) EAT - East Africa Time 65 : (UTC+03) EEDT - Eastern European Daylight Time 66 : (UTC+03) EEST - Eastern European Summer Time 67 : (UTC+03) MSK - Moscow Standard Time 68 : (UTC+03:30) IRST - Iran Standard Time 69 : (UTC+04) AMT - Armenia Time 70 : (UTC+04) AST - Arabian Standard Time (Abu Dhabi, Muscat) 71 : (UTC+04) AZT - Azerbaijan Time 72 : (UTC+04) GET - Georgia Standard Time 73 : (UTC+04) MSD - Moscow Summer Time 74 : (UTC+04) MUT - Mauritius Time 75 : (UTC+04) RET - Reunion Time 76 : (UTC+04) SAMT - Samara Time 77 : (UTC+04) SCT - Seychelles Time 78 : (UTC+04:30) AFT - Afghanistan Time 79 : (UTC+05) AMST - Armenia Summer Time 80 : (UTC+05) HMT - Heard and McDonald Islands Time 81 : (UTC+05) PKT - Pakistan Standard Time 82 : (UTC+05) YEKT - Yekaterinburg Time 83 : (UTC+05:30) IST - Indian Standard Time 84 : (UTC+05:30) SLT - Sri Lanka Time 85 : (UTC+05:45) NPT - Nepal Time 86 : (UTC+06) BIOT - British Indian Ocean Time 87 : (UTC+06) BST - Bangladesh Standard Time 88 : (UTC+06) BTT - Bhutan Time 89 : (UTC+06) OMST - Omsk Time 90 : (UTC+06:30) CCT - Cocos Islands Time 91 : (UTC+06:30) MST - Myanmar Standard Time 92 : (UTC+07) CXT - Christmas Island Time 93 : (UTC+07) ICT - Indochina Time 94 : (UTC+07) KRAT - Krasnoyarsk Time 95 : (UTC+07) THA - Thailand Standard Time 96 : (UTC+08) ACT - ASEAN Common Time 97 : (UTC+08) AWST - Australian Western Standard Time 98 : (UTC+08) BDT - Brunei Time 99 : (UTC+08) CST - China Standard Time 100 : (UTC+08) HKT - Hong Kong Time 101 : (UTC+08) IRKT - Irkutsk Time 102 : (UTC+08) MST - Malaysian Standard Time 103 : (UTC+08) PST - Philippine Standard Time 104 : (UTC+08) SST - Singapore Standard Time 105 : (UTC+09) AWDT - Australian Western Daylight Time 106 : (UTC+09) JST - Japan Standard Time 107 : (UTC+09) KST - Korea Standard Time 108 : (UTC+09) YAKT - Yakutsk Time 109 : (UTC+09:30) ACST - Australian Central Standard Time 110 : (UTC+10) AEST - Australian Eastern Standard Time 111 : (UTC+10) ChST - Chamorro Standard Time 112 : (UTC+10) VLAT - Vladivostok Time 113 : (UTC+10:30) ACDT - Australian Central Daylight Time 114 : (UTC+10:30) LHST - Lord Howe Standard Time 115 : (UTC+11) AEDT - Australian Eastern Daylight Time 116 : (UTC+11) MAGT - Magadan Time 117 : (UTC+11) SBT - Solomon Islands Time 118 : (UTC+11:30) NFT - Norfolk Time[1] 119 : (UTC+12) FJT - Fiji Time 120 : (UTC+12) GILT - Gilbert Island Time 121 : (UTC+12) PETT - Kamchatka Time 122 : (UTC+12:45) CHAST - Chatham Standard Time 123 : (UTC+13) PHOT - Phoenix Island Time 124 : (UTC+14) LINT - Line Islands Time" ::={whispApsConfig 89} ofdmSMRcvTargetLvl OBJECT-TYPE SYNTAX INTEGER (-80..-40) UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Desired SM Receive Level at AP (dBm, Range -40dBm to -80 dBm). As of release 12.1, on MIMO systems this is a combined power level value." ::={whispApsConfig 90} radiusPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Port used to connect to the RADIUS server. Default is 1812." ::={whispApsConfig 91} radiusAcctPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Port used to for RADIUS Accounting. Default is 1813." ::={whispApsConfig 92} lastSesStatsReset OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the timestamp of last reset of session stats or None otherwise." ::={whispApsConfig 93} resetSesStats OBJECT-TYPE SYNTAX INTEGER { noReset(0), reset(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Resets the session stats if true." ::={whispApsConfig 94} rfOLTrap OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable SNMP Trap for when RF Overload exceeds configured Threshold level." ::={whispApsConfig 95} rfOLThreshold OBJECT-TYPE SYNTAX INTEGER (1..100) UNITS "%" MAX-ACCESS read-write STATUS current DESCRIPTION "Percent of packet overload in the RF Downlink where SNMP is generated and sent to Network Manager." ::={whispApsConfig 96} rfOLEnable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable Throughput RF Overload Monitoring monitoring." ::={whispApsConfig 97} actionListFilename OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Name of the file that contains the Action List for Auto update commands from CNUT" ::={whispApsConfig 98} enableAutoupdate OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/Disables auto-update of the SM's under an AP" ::={whispApsConfig 99} accountingSmReAuthInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Select Interval for Reauthentication of SM" ::={whispApsConfig 100} syslogDomainNameAppend OBJECT-TYPE SYNTAX INTEGER { disableDomain(0), appendDomain(1)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute is deprecated. Use syslogDomainNameAppend in whispBoxAttributesGroup" ::={whispApsConfig 101} syslogServerAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This attribute is deprecated. Use syslogServerAddr in whispBoxAttributesGroup" ::={whispApsConfig 102} syslogServerPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute is deprecated. Use syslogServerPort in whispBoxAttributesGroup" ::={whispApsConfig 103} syslogXmitAP OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/Disables transmission of Syslogs from AP/BHM" ::={whispApsConfig 104} syslogXmitSMs OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/Disables transmission of Syslogs from connected SMs/BHS. This can be over-ridden by the setting on individual SMs/ the BHS." ::={whispApsConfig 105} accountingInterimUpdateInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Select Interval for Interim Updates" ::={whispApsConfig 106} gpsOutputEn OBJECT-TYPE SYNTAX INTEGER { off(0), on(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or Disable GPS sync output enable." ::={whispApsConfig 107} radioMode OBJECT-TYPE SYNTAX INTEGER { combo(0), comboDualChan(1), mimoOnly(2), fskOnly(3)} MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This OID is obsolete." ::={whispApsConfig 206} rfTelnetAccess OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Allows/prohibits uplink Telnet access (SM->AP)." ::={whispApsConfig 207} upLnkMaxBurstDataRate OBJECT-TYPE SYNTAX INTEGER UNITS "Kilobits/sec" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum burst uplink rate." ::={whispApsConfig 208} dwnLnkMaxBurstDataRate OBJECT-TYPE SYNTAX INTEGER UNITS "Kilobits/sec" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum burst downlink rate." ::={whispApsConfig 209} rfPPPoEPADIForwarding OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enables/disables forwarding of PPPoE PADI packets from AP to SM." ::={whispApsConfig 210} allowedIPAccessNMLength1 OBJECT-TYPE SYNTAX INTEGER (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed" ::={whispApsConfig 211} allowedIPAccessNMLength2 OBJECT-TYPE SYNTAX INTEGER (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed" ::={whispApsConfig 212} allowedIPAccessNMLength3 OBJECT-TYPE SYNTAX INTEGER (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed" ::={whispApsConfig 213} bridgeFloodUnknownsEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "To enable or disable bridge flooding unknown unicast packets. (0) - Bridge will not forward unknown unicast packets. (1) - Bridge will flood unknown unicast packets." ::={whispApsConfig 214} berModSelect OBJECT-TYPE SYNTAX INTEGER { qpsk(0), qam-16(1), qam-64(2), qam-256(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "The modulation the AP generates BER at. 0 for QPSK, 1 for 16-QAM, 2 for 64-QAM, and 3 for 256-QAM." ::={whispApsConfig 215} remoteSpectrumAnalyzerScanBandwidth OBJECT-TYPE SYNTAX INTEGER { bandwidth5MHz(0), bandwidth10MHz(1), bandwidth20MHz(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Scanning Bandwidth used for the Remote Spectrum Analyzer. Only available on PMP 450." ::={whispApsConfig 216} multicastVCDataRate OBJECT-TYPE SYNTAX INTEGER { disable(0), rate1X(4), rate2X(5), rate4X(7), rate6X(8), rate8X(9)} MAX-ACCESS read-write STATUS current DESCRIPTION "The data rate that is used for the Multicast VC. 8X is for engineering only." ::={whispApsConfig 217} dlnkMcastCIR OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Downlink Multicast CIR (kbps)" ::={whispApsConfig 218} multicastRetryCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast Repeat Count : Range 0 - 2. For APs." ::={whispApsConfig 219} apConfigAdjacentChanSupport OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Used to enable or disable adjacent channel support." ::={whispApsConfig 220} whispRegStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This shows the registration status of a link." ::={whispApsLink 4} -- Link test configuration linkTestLUID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "LUID selection for Link Test. Valid range: 2-255" ::={whispApsLinkTestConfig 1} linkTestDuration OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Duration for the Link Test. Valid range: 2-10 seconds" ::={whispApsLinkTestConfig 2} -- Link test action linkTestAction OBJECT-TYPE SYNTAX INTEGER { stopped(0), start(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Setting value 1 will initiate link test. Note that trying to set 0 will not stop the test. In fact it will return an error message. The value of 0 just indicates the idle state meaning no test is running or the current test is done. That's why the word stopped is used and not the action verb stop." ::={whispApsLinkTestConfig 3} linkTestPktLength OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Packet length for Link Test. Valid range: 64-1714 bytes" ::={whispApsLinkTestConfig 4} linkTestMode OBJECT-TYPE SYNTAX INTEGER { rflinktest(0), linktestwithbridging(1), linktestwithbridgingandmir(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Link Test Mode 0 = RF Link Test (traffic doesn't go through bridge, highest throughput) 1 = Link Test with Bridging 2 = Link Test with Bridging and MIR" ::={whispApsLinkTestConfig 5} linkTestSNRCalculation OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable Signal to Noise Ratio (SNR) calculations during a Link Test. Enabling(1) will calulate SNR on all receiving packets. Due to load on CPU, will slightly degrade packet per second capabilities. Only applicable to GenII OFDM products and up." ::={whispApsLinkTestConfig 6} linkTestWithDualPath OBJECT-TYPE SYNTAX INTEGER { lowpriorityvconly(0), highandlowpriorityvcs(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Link Test with: 0 = Low Priority VC only 1 = High and Low Priority VCs" ::={whispApsLinkTestConfig 7} -- Link test configuration linkTestNumPkt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Number of packets to send. Valid range: 0-64 where 0 will flood the link for the duration of the test." ::={whispApsLinkTestConfig 8} -- Link test results testLUID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "LUID number of selected unit." ::={whispApsLinkTestResult 1} linkTestStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Status for Link Test." ::={whispApsLinkTestResult 2} linkTestError OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Error status of Link Test: (1) Failed to recieve handshake from remote device (2) No session is currently active. Please try again after session established. (3) Received a bad transaction ID. Please try again. (4) We werent able to send the test request to the remote device. (5) We didnt receive any results from the remote device." ::={whispApsLinkTestResult 3} testDuration OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of link test." ::={whispApsLinkTestResult 4} downLinkRate OBJECT-TYPE SYNTAX INTEGER UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Down Link Rate." ::={whispApsLinkTestResult 5} upLinkRate OBJECT-TYPE SYNTAX INTEGER UNITS "bps" MAX-ACCESS read-only STATUS current DESCRIPTION "Up Link Rate." ::={whispApsLinkTestResult 6} downLinkEff OBJECT-TYPE SYNTAX INTEGER UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "Down Link Efficiency." ::={whispApsLinkTestResult 7} maxDwnLinkIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "For link test results, the maximum possible downlink efficiency percentage (always 100%)." ::={whispApsLinkTestResult 8} actDwnLinkIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Actual down link index." ::={whispApsLinkTestResult 9} expDwnFragCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Expected Fragment Count." ::={whispApsLinkTestResult 10} actDwnFragCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Fragment Count" ::={whispApsLinkTestResult 11} upLinkEff OBJECT-TYPE SYNTAX INTEGER UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "Up link efficiency." ::={whispApsLinkTestResult 12} expUpFragCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Uplink expected Fragment Count." ::={whispApsLinkTestResult 13} actUpFragCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual uplink Fragment Count." ::={whispApsLinkTestResult 14} maxUpLinkIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "For link test results, the maximum possible uplink efficiency percentage (always 100%)." ::={whispApsLinkTestResult 15} actUpLinkIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Actual Up link index." ::={whispApsLinkTestResult 16} fragments1xDwnLinkVertical OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on down link at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispApsLinkTestResult 17} fragments2xDwnLinkVertical OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on down link at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispApsLinkTestResult 18} fragments3xDwnLinkVertical OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on down link at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispApsLinkTestResult 19} fragments4xDwnLinkVertical OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on down link at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispApsLinkTestResult 20} fragments1xUpLinkVertical OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on up link at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispApsLinkTestResult 21} fragments2xUpLinkVertical OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on up link at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispApsLinkTestResult 22} fragments3xUpLinkVertical OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on up link at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispApsLinkTestResult 23} fragments4xUpLinkVertical OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on up link at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispApsLinkTestResult 24} bitErrorsCorrected1xDwnLinkVertical OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on down link at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispApsLinkTestResult 25} bitErrorsCorrected2xDwnLinkVertical OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on down link at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispApsLinkTestResult 26} bitErrorsCorrected3xDwnLinkVertical OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on down link at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispApsLinkTestResult 27} bitErrorsCorrected4xDwnLinkVertical OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on down link at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispApsLinkTestResult 28} bitErrorsCorrected1xUpLinkVertical OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on up link at 1X (QPSK). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispApsLinkTestResult 29} bitErrorsCorrected2xUpLinkVertical OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on up link at 2X (16-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispApsLinkTestResult 30} bitErrorsCorrected3xUpLinkVertical OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on up link at 3X (64-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispApsLinkTestResult 31} bitErrorsCorrected4xUpLinkVertical OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on up link at 4X (256-QAM). For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispApsLinkTestResult 32} signalToNoiseRatioDownLinkVertical OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Estimated Signal to Noise Ratio in dB for the down link. For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispApsLinkTestResult 33} signalToNoiseRatioUpLinkVertical OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Estimated Signal to Noise Ratio in dB for the up link. For Gen II OFDM and forward. For MIMO this is the vertical path." ::={whispApsLinkTestResult 34} fragments1xDwnLinkHorizontal OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on down link at 1X (QPSK). For MIMO only. For MIMO this is the horizontal path." ::={whispApsLinkTestResult 35} fragments2xDwnLinkHorizontal OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on down link at 2X (16-QAM). For MIMO only. For MIMO this is the horizontal path." ::={whispApsLinkTestResult 36} fragments3xDwnLinkHorizontal OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on down link at 3X (64-QAM). For MIMO only. For MIMO this is the horizontal path." ::={whispApsLinkTestResult 37} fragments4xDwnLinkHorizontal OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on down link at 4X (256-QAM). For MIMO only. For MIMO this is the horizontal path." ::={whispApsLinkTestResult 38} fragments1xUpLinkHorizontal OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on up link at 1X (QPSK). For MIMO only. For MIMO this is the horizontal path." ::={whispApsLinkTestResult 39} fragments2xUpLinkHorizontal OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on up link at 2X (16-QAM). For MIMO only. For MIMO this is the horizontal path." ::={whispApsLinkTestResult 40} fragments3xUpLinkHorizontal OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on up link at 3X (64-QAM). For MIMO only. For MIMO this is the horizontal path." ::={whispApsLinkTestResult 41} fragments4xUpLinkHorizontal OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of fragments received on up link at 4X (256-QAM). For MIMO only. For MIMO this is the horizontal path." ::={whispApsLinkTestResult 42} bitErrorsCorrected1xDwnLinkHorizontal OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on down link at 1X (QPSK). For MIMO and forward. For MIMO this is the horizontal path." ::={whispApsLinkTestResult 43} bitErrorsCorrected2xDwnLinkHorizontal OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on down link at 2X (16-QAM). For MIMO and forward. For MIMO this is the horizontal path." ::={whispApsLinkTestResult 44} bitErrorsCorrected3xDwnLinkHorizontal OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on down link at 3X (64-QAM). For MIMO and forward. For MIMO this is the horizontal path." ::={whispApsLinkTestResult 45} bitErrorsCorrected4xDwnLinkHorizontal OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on down link at 4X (256-QAM). For MIMO and forward. For MIMO this is the horizontal path." ::={whispApsLinkTestResult 46} bitErrorsCorrected1xUpLinkHorizontal OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on up link at 1X (QPSK). For MIMO and forward. For MIMO this is the horizontal path." ::={whispApsLinkTestResult 47} bitErrorsCorrected2xUpLinkHorizontal OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on up link at 2X (16-QAM). For MIMO and forward. For MIMO this is the horizontal path." ::={whispApsLinkTestResult 48} bitErrorsCorrected3xUpLinkHorizontal OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Engineering use only. Number of bit errors corrected on average per fragment on up link at 3X (64-QAM). For MIMO and forward. For MIMO this is the horizontal path." ::={whispApsLinkTestResult 49} bitErrorsCorrected4xUpLinkHorizontal OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bit errors corrected on average per fragment on up link at 4X (256-QAM). For MIMO and forward. For MIMO this is the horizontal path." ::={whispApsLinkTestResult 50} signalToNoiseRatioDownLinkHorizontal OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Estimated Signal to Noise Ratio in dB for the down link. For MIMO and forward. For MIMO this is the horizontal path." ::={whispApsLinkTestResult 51} signalToNoiseRatioUpLinkHorizontal OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Estimated Signal to Noise Ratio in dB for the up link. For Gen II OFDM and forward. For MIMO this is the horizontal path." ::={whispApsLinkTestResult 52} whispGPSStats OBJECT-TYPE SYNTAX INTEGER { gpsSynchronized(1), gpsLostSync(2), generatingSync(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "This shows whether the AP is synchrinized to the GPS timer." ::={whispApsGPS 1} gpsSyncSource OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Source of GPS Sync Pulse." ::={whispApsGPS 2} gpsSyncStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current Live value of Sync Status." ::={whispApsGPS 3} gpsTrackingMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GPS tracking mode." ::={whispApsGPS 4} gpsTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GPS time." ::={whispApsGPS 5} gpsDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GPS date." ::={whispApsGPS 6} gpsSatellitesTracked OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of satellites GPS is tracking." ::={whispApsGPS 7} gpsSatellitesVisible OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of satellites the GPS sees" ::={whispApsGPS 8} gpsHeight OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GPS height." ::={whispApsGPS 9} gpsAntennaConnection OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Antenna Connection status." ::={whispApsGPS 10} gpsLatitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GPS Latitude." ::={whispApsGPS 11} gpsLongitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GPS Longitude." ::={whispApsGPS 12} gpsInvalidMsg OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Number of invalid messages." ::={whispApsGPS 13} gpsRestartCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of GPS unit restarts." ::={whispApsGPS 14} gpsReInitCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "GPS ReInit counts. The number of times we have done a complete re-initialization of the GPS device." ::={whispApsGPS 15} gpsReceiverInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string contains information on GPS receiver." ::={whispApsGPS 16} gpsFreeRun OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "This variable is deprecated. Setting this value to false will set AutoSync. Setting this value to true will set AutoSync plus Free Run." ::={whispApsGPS 17} autoSyncStatus OBJECT-TYPE SYNTAX INTEGER { noSync(0), onBoardGPSSync(1), timingPortUGPSSync(2), onBoardGPSAndTimingPortUGPSSync(3), powrPortSync(4), onBoardGPSAndPowrPortSync(5), timingPortUGPSAndPowrPortSync(6), onBoardGPSAndTimingPortUGPSAndPowrPortSync(7)} MAX-ACCESS read-only STATUS current DESCRIPTION "Current Live value of Sync Status. Following values represent what sources have sync. (0) No Sync (1) On-board GPS Sync (2) Timing Port/UGPS Sync (3) On-board GPS and Timing Port/UGPS Sync (4) Power Port Sync (5) On-board GPS and Power Port Sync (6) Timing Port/UGPS and Power Port Sync (7) On-board GPS, Timing Port/UGPS and Power Port Sync" ::={whispApsGPS 18} -- Registration Events whispRegComplete NOTIFICATION-TYPE OBJECTS { linkLUID, linkPhysAddress} STATUS current DESCRIPTION "Signals registration complete." ::={whispApsRegEvent 1} whispRegLost NOTIFICATION-TYPE OBJECTS { linkLUID, linkPhysAddress} STATUS current DESCRIPTION "Signals registration lost." ::={whispApsRegEvent 2} whispRegFailure NOTIFICATION-TYPE OBJECTS { regFailESN, regGrantReason} STATUS current DESCRIPTION "Signals a registration failure has occured." ::={whispApsRegEvent 3} whispDefKeyUsed NOTIFICATION-TYPE OBJECTS { linkLUID, linkPhysAddress} STATUS current DESCRIPTION "Signals Default Key used for encryptiont." ::={whispApsRegEvent 4} -- GPS Events whispGPSInSync NOTIFICATION-TYPE OBJECTS { whispGPSStats, whispBoxEsn} STATUS current DESCRIPTION "Signals a transition from not-synchronized to synchronized." ::={whispGPSEvent 1} whispGPSOutSync NOTIFICATION-TYPE OBJECTS { gpsStatus, whispBoxEsn} STATUS current DESCRIPTION "Signals a transition from synchronized to not-synchronized." ::={whispGPSEvent 2} -- DFS events whispRadarDetected NOTIFICATION-TYPE OBJECTS { dfsStatus, whispBoxEsn} STATUS current DESCRIPTION "Radar detected transmit stopped." ::={whispApsDfsEvent 1} whispRadarEnd NOTIFICATION-TYPE OBJECTS { dfsStatus, whispBoxEsn} STATUS current DESCRIPTION "Radar ended back to normal transmit." ::={whispApsDfsEvent 2} -- Regulatory Failure due to Invalid Channel set for the region. regulatoryApCheckInvalidChanFailed NOTIFICATION-TYPE OBJECTS { regulatoryStatus, whispBoxEsn} STATUS current DESCRIPTION "Regulatory Check failed for the unit due to a invalid channel for the configured region. regulatoryStatus - Text description for the failure. physAddress - the MAC address of the unit." ::={whispApRegulatoryEvent 1} -- Regulatory Failure due to no region set regulatoryCheckFailedNoRegionAp NOTIFICATION-TYPE OBJECTS { whispBoxEsn} STATUS current DESCRIPTION "Regulatory Check failed because a valid region has not be configured. physAddress - the MAC address of the unit." ::={whispApRegulatoryEvent 2} -- Regulatory Failure due to Invalid Channel Bandwidth set for the region. regulatoryApCheckInvalidChBwFailed NOTIFICATION-TYPE OBJECTS { regulatoryStatus, whispBoxEsn} STATUS current DESCRIPTION "Regulatory Check failed due to an invalid channel bandwidth for the configured region. regulatoryStatus - Text description for the failure. physAddress - the MAC address of the unit." ::={whispApRegulatoryEvent 3} -- RF link overload detection in the Downlink Direction. rfLinkOverloadCondition NOTIFICATION-TYPE OBJECTS { rfOutDiscardRate, whispBoxEsn} STATUS current DESCRIPTION "AP has exceeded the preset discard percentage in the RF Downlink Direction. rfOutDiscardRate - Current discard Rate. physAddress - the MAC address of the unit." ::={whispApRFOverloadEvent 1} whispLinkTestGroup OBJECT-GROUP OBJECTS { linkTestLUID, linkTestDuration, linkTestAction, linkTestPktLength, testLUID, linkTestStatus, linkTestError, testDuration, downLinkRate, upLinkRate, downLinkEff, maxDwnLinkIndex, actDwnLinkIndex, expDwnFragCount, actDwnFragCount, upLinkEff, expUpFragCount, actUpFragCount, maxUpLinkIndex, actUpLinkIndex, fragments1xDwnLinkVertical, fragments2xDwnLinkVertical, fragments3xDwnLinkVertical, fragments4xDwnLinkVertical, fragments1xUpLinkVertical, fragments2xUpLinkVertical, fragments3xUpLinkVertical, fragments4xUpLinkVertical, fragments1xDwnLinkHorizontal, fragments2xDwnLinkHorizontal, fragments3xDwnLinkHorizontal, fragments4xDwnLinkHorizontal, fragments1xUpLinkHorizontal, fragments2xUpLinkHorizontal, fragments3xUpLinkHorizontal, fragments4xUpLinkHorizontal, bitErrorsCorrected1xDwnLinkVertical, bitErrorsCorrected2xDwnLinkVertical, bitErrorsCorrected3xDwnLinkVertical, bitErrorsCorrected4xDwnLinkVertical, bitErrorsCorrected1xUpLinkVertical, bitErrorsCorrected2xUpLinkVertical, bitErrorsCorrected3xUpLinkVertical, bitErrorsCorrected4xUpLinkVertical, signalToNoiseRatioDownLinkVertical, signalToNoiseRatioUpLinkVertical, bitErrorsCorrected1xDwnLinkHorizontal, bitErrorsCorrected2xDwnLinkHorizontal, bitErrorsCorrected3xDwnLinkHorizontal, bitErrorsCorrected4xDwnLinkHorizontal, bitErrorsCorrected1xUpLinkHorizontal, bitErrorsCorrected2xUpLinkHorizontal, bitErrorsCorrected3xUpLinkHorizontal, bitErrorsCorrected4xUpLinkHorizontal, signalToNoiseRatioDownLinkHorizontal, signalToNoiseRatioUpLinkHorizontal, linkTestSNRCalculation, linkTestWithDualPath, linkTestMode, linkTestNumPkt} STATUS current DESCRIPTION "WHiSP APs link test group." ::= {whispApsGroups 1} whispApsConfigGroup OBJECT-GROUP OBJECTS { gpsInput, rfFreqCarrier, dwnLnkData, highPriorityUpLnkPct, numUAckSlots, uAcksReservHigh, numDAckSlots, dAcksReservHigh, numCtlSlots, numCtlSlotsReserveHigh, upLnkMaxBurstDataRate, upLnkDataRate, upLnkLimit, dwnLnkMaxBurstDataRate, dwnLnkDataRate, dwnLnkLimit, sectorID, maxRange, asIP1, asIP2, asIP3, asIP4, asIP5, lanIpAp, lanMaskAp, defaultGwAp, privateIp, gpsTrap, regTrap, txSpreading, apBeaconInfo, authMode, authKeyAp, authKeyOptionAP, encryptionMode, ntpServerIp, multicastRetryCount, encryptDwBroadcast, updateAppAddress, dfsConfig, vlanEnable, configSource, apRateAdapt, numCtlSlotsHW, displayAPEval, smIsolation, bridgeFloodUnknownsEnable, ipAccessFilterEnable, allowedIPAccess1, allowedIPAccess2, allowedIPAccess3, allowedIPAccessNMLength1, allowedIPAccessNMLength2, allowedIPAccessNMLength3, rfTelnetAccess, rfPPPoEPADIForwarding, tslBridging, untranslatedArp, limitFreqBand900, txPwrLevel, rfFreqCaralt1, rfFreqCaralt2, scheduleWhitening, remoteSpectrumAnalysisDuration, remoteSpectrumAnalyzerLUID, bhReReg, dlnkBcastCIR, dlnkMcastCIR, verifyGPSChecksum, qinqEthType, multicastVCDataRate, colorCodeRescanTimer, colorCodeRescanIdleTimer, fskSMTxPwrCntl, fskSMRcvTargetLvl, berModSelect, lastSesStatsReset, resetSesStats, syslogDomainNameAppend, syslogServerAddr, syslogServerPort, syslogXmitAP, syslogXmitSMs, uGPSPower, gpsOutputEn, radioMode, authSharedSecret1, authSharedSecret2, authSharedSecret3, radiusPort, radiusAcctPort, rfOLEnable, rfOLTrap, rfOLThreshold, remoteSpectrumAnalyzerScanBandwidth, apConfigAdjacentChanSupport, ofdmSMRcvTargetLvl, apRxDelay, apVlanOverride, dhcpRelayAgentEnable, dhcpRelayAgentSrvrIP, onlyAllowVer95OrAbove, whispWebUseAuthServer, whispUsrAuthSharedSecret1, whispUsrAuthSharedSecret2, whispUsrAuthSharedSecret3, whispUsrAcctSvr1, whispUsrAcctSvr2, whispUsrAcctSvr3, whispUsrAuthPhase1, accountingInterimUpdateInterval, accountingSmReAuthInterval, dropSession, timeZone, actionListFilename, enableAutoupdate} STATUS current DESCRIPTION "WHiSP APs configuration group." ::= {whispApsGroups 2} whispApsLinkTableGroup OBJECT-GROUP OBJECTS { linkLUID, linkDescr, linkPhysAddress, linkManagementIP, linkFragmentsReceived1XVertical, linkFragmentsReceived2XVertical, linkFragmentsReceived3XVertical, linkFragmentsReceived4XVertical, signalToNoiseRatioVertical, linkFragmentsReceived1XHorizontal, linkFragmentsReceived2XHorizontal, linkFragmentsReceived3XHorizontal, linkFragmentsReceived4XHorizontal, signalToNoiseRatioHorizontal, linkSignalStrengthRatio, linkRadioDbmHorizontal, linkRadioDbmVertical, maxSMTxPwr, productType, linkAdaptRateLowPri, linkAdaptRateHighPri, autoUpdateStatus, linkMtu, linkSpeed, linkOperStatus, linkInOctets, linkInUcastPkts, linkInNUcastPkts, linkInDiscards, linkInError, linkInUnknownProtos, linkOutOctets, linkOutUcastPkts, linkOutNUcastPkts, linkOutDiscards, linkOutError, linkOutQLen, linkSessState, linkESN, linkRSSI, linkAveJitter, linkLastJitter, linkAirDelay, linkRegCount, linkReRegCount, linkTimeOut, linkLastRSSI, sessionCount, softwareVersion, softwareBootVersion, fpgaVersion, linkSiteName, avgPowerLevel, lastPowerLevel, sesDownLinkRate, sesDownLinkLimit, sesUpLinkRate, sesUpLinkLimit, adaptRate, sesLoUpCIR, sesLoDownCIR, sesHiUpCIR, sesHiDownCIR, platformVer, smSessionTmr, smSessionSeqNumMismatch, dataVCNum, hiPriQEn, dataVCNumHiQ, linkInOctetsHiQ, linkInUcastPktsHiQ, linkInNUcastPktsHiQ, linkInDiscardsHiQ, linkInErrorHiQ, linkInUnknownProtosHiQ, linkOutOctetsHiQ, linkOutUcastPktsHiQ, linkOutNUcastPktsHiQ, linkOutDiscardsHiQ, linkOutErrorHiQ, vcQOverflow, vcQOverflowHiQ, p7p8HiPriQEn, p7p8HiPriQ, linkAirDelayns, linkQualityAPData, radiusReplyMsg, radiusFramedIPAddress, radiusFramedIPNetmask, radiusDefaultGateway} STATUS current DESCRIPTION "WHiSP APs Link Table group." ::= {whispApsGroups 3} whispApsNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { whispRegComplete, whispRegLost, whispRegFailure, whispDefKeyUsed, whispGPSInSync, whispGPSOutSync, whispRadarDetected, whispRadarEnd, regulatoryApCheckInvalidChanFailed, regulatoryCheckFailedNoRegionAp, regulatoryApCheckInvalidChBwFailed, rfLinkOverloadCondition} STATUS current DESCRIPTION "WHiSP APs notification group." ::= {whispApsGroups 4} whispApsFailedRegTableGroup OBJECT-GROUP OBJECTS { regGrantReason, regFailESN, regFailTime, regFailSeqNum, regFailReasonText} STATUS current DESCRIPTION "WHiSP APs Failed Registration Table group." ::= {whispApsGroups 5} -- Access Point status page regCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of registered SMs." ::={whispApsStatus 1} gpsStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "GPS status." ::={whispApsStatus 2} radioSlicingAp OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The variable is deprecated." ::={whispApsStatus 3} radioTxGainAp OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Radio transmit gain setting." ::={whispApsStatus 4} dataSlotDwn OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of data slot down." ::={whispApsStatus 5} dataSlotUp OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of data slot up." ::={whispApsStatus 6} dataSlotUpHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of high priority data slot up." ::={whispApsStatus 7} upLnkAckSlot OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Uplink ack slots." ::={whispApsStatus 8} upLnkAckSlotHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Hige priority uplink ack slots." ::={whispApsStatus 9} dwnLnkAckSlot OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Downlink ack slots." ::={whispApsStatus 10} dwnLnkAckSlotHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Hige priority downlink ack slots." ::={whispApsStatus 11} numCtrSlot OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of control slots." ::={whispApsStatus 12} numCtrSlotHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "High priority control slot." ::={whispApsStatus 13} dfsStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Dynamic frequency shifting status." ::={whispApsStatus 14} dfsStatusPrimary OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Dynamic frequency shifting status for Primary Channel." ::={whispApsStatus 15} dfsStatusAlt1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Dynamic frequency shifting status for Alternate Channel 1" ::={whispApsStatus 16} dfsStatusAlt2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Dynamic frequency shifting status for Alternate Channel 2" ::={whispApsStatus 17} maxRegSMCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of unique Subscriber Modules registered with this AP at once" ::={whispApsStatus 18} systemTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the system time of the unit" ::={whispApsStatus 19} lastNTPTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the last NTP time acquired by the AP" ::={whispApsStatus 20} regulatoryStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current status of the regulatory check on the AP." ::={whispApsStatus 21} dhcpRlyAgntStat-reqRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of DHCP Requests received by the DHCP Relay." ::={whispApsStatus 22} dhcpRlyAgntStat-reqRelayed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of DHCP Requests relayed by the DHCP Relay." ::={whispApsStatus 23} dhcpRlyAgntStat-reqDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of DHCP Requests discarded by the DHCP Relay." ::={whispApsStatus 24} dhcpRlyAgntStat-respRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of DHCP Replies received by the DHCP Relay." ::={whispApsStatus 25} dhcpRlyAgntStat-respRelayed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of DHCP Replies relayed by the DHCP Relay." ::={whispApsStatus 26} dhcpRlyAgntStat-respDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of DHCP Replies discarded by the DHCP Relay." ::={whispApsStatus 27} dhcpRlyAgntStat-untrustedDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of untrusted messages discarded by the DHCP Relay." ::={whispApsStatus 28} dhcpRlyAgntStat-maxHopDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of messages discarded by the DHCP Relay due to exceeded max hop." ::={whispApsStatus 29} dhcpRlyAgntStat-pktTooBig OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of messages forwarded without relay information by the DHCP Relay due to relay information exceeding max message size." ::={whispApsStatus 30} dhcpRlyAgntStat-invalidGiaddrDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of messages discarded by the DHCP Relay due to invalid giaddr in packet." ::={whispApsStatus 31} regFailureCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total number or Registration Grant Failures." ::={whispApsStatus 32} ntpLogSNMP OBJECT-TYPE SYNTAX EventString MAX-ACCESS read-only STATUS current DESCRIPTION "NTP Log" ::={whispApsStatus 33} uGPSPowerStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Current UGPS Power Status (UGPS capable APs only)." ::={whispApsStatus 34} rfOutDiscardRate OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of OutDiscards on the RF link (RF Overload %) in the last minute." ::={whispApsStatus 35} autoUpdateGlobalStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the Auto-Update Command" ::={whispApsStatus 36} currentRadioFreqCarrier OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current Radio Frequency Carrier" ::={whispApsStatus 37} ntpDomainNameAppend OBJECT-TYPE SYNTAX INTEGER { disableDomain(0), appendDomain(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Select whether to append the configured management domain name to the configured trap names. For example, if dnsMgmtDomainName is set to 'example.com', ntpServer is set to 'ntp', and ntpDomainNameAppend is set to appendDomain, the ntpServer name used would be 'ntp.example.com'." ::={whispApsDNS 1} ntpServer1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "NTP Server 1 Address. Format is either an IP address or DNS name." ::={whispApsDNS 2} ntpServer2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "NTP Server 2 Address. Format is either an IP address or DNS name." ::={whispApsDNS 3} ntpServer3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "NTP Server 3 Address. Format is either an IP address or DNS name." ::={whispApsDNS 4} dhcprDomainNameAppend OBJECT-TYPE SYNTAX INTEGER { disableDomain(0), appendDomain(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Select whether to append the configured management domain name to the configured trap names. For example, if dnsMgmtDomainName is set to 'example.com', dhcprServer is set to 'dhcpr', and dhcprDomainNameAppend is set to appendDomain, the dhcprServer name used would be 'dhcpr.example.com'." ::={whispApsDNS 5} dhcprServer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP Server IP which will be used for forwarding DHCP messages by the DHCP Relay Agent in the MultiPoint AP. - Format is either an IP address or DNS name. - Default is 255.255.255.255 (broadcast)." ::={whispApsDNS 6} authDomainNameAppend OBJECT-TYPE SYNTAX INTEGER { disableDNSDomain(0), enableDNSDomain(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Select whether to append the configured management domain name to the configured trap names. For example, if dnsMgmtDomainName is set to 'example.com', authServer1 is set to 'auth1', and authDomainNameAppend is set to appendDomain, the authServer1 name used would be 'auth1.example.com'." ::={whispApsDNS 7} authServer1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication Server 1. Format is either an IP address or DNS name." ::={whispApsDNS 8} authServer2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication Server 2. Format is either an IP address or DNS name." ::={whispApsDNS 9} authServer3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication Server 3. Format is either an IP address or DNS name." ::={whispApsDNS 10} authServer4 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication Server 4. Format is either an IP address or DNS name." ::={whispApsDNS 11} authServer5 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication Server 5. Format is either an IP address or DNS name." ::={whispApsDNS 12} acctDomainNameAppend OBJECT-TYPE SYNTAX INTEGER { disableDomain(0), appendDomain(1)} MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Obsoleted. Use whispApsDNS.authDomainNameAppend." ::={whispApsDNS 13} clearLinkTableStats OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to a nonzero value will clear the link table stats." ::={whispApsControls 1} whispApsRFConfigRadios OBJECT-TYPE SYNTAX SEQUENCE OF WhispApsRFConfigRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio configuration table." ::= {whispApsRFConfig 1} whispApsRFConfigRadioEntry OBJECT-TYPE SYNTAX WhispApsRFConfigRadioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Radio configuration entry." AUGMENTS {whispBoxRFPhysicalRadioEntry} ::= {whispApsRFConfigRadios 1} WhispApsRFConfigRadioEntry ::= SEQUENCE{ radioFreqCarrier INTEGER, radioDownlinkPercent INTEGER, radioMaxRange INTEGER, radioControlSlots INTEGER, radioTransmitOutputPower INTEGER, radioColorCode INTEGER } radioFreqCarrier OBJECT-TYPE SYNTAX INTEGER { wired(0)} UNITS "kHz" MAX-ACCESS read-write STATUS current DESCRIPTION "RF Frequency. Please see the whispBoxRFPhysicalRadioFrequencies SNMP table for a list of available frequencies. 0: wired." ::={whispApsRFConfigRadioEntry 1} radioDownlinkPercent OBJECT-TYPE SYNTAX INTEGER (1..99) UNITS "%" MAX-ACCESS read-write STATUS current DESCRIPTION "This is the percentage of frame data space allocated for downlink." ::={whispApsRFConfigRadioEntry 2} radioMaxRange OBJECT-TYPE SYNTAX INTEGER UNITS "miles" MAX-ACCESS read-write STATUS current DESCRIPTION "Access point max range." ::={whispApsRFConfigRadioEntry 3} radioControlSlots OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Total number of control slots for HW Scheduling Point-to-Mulitpoint mode (Not applicable for PtoP radios). For PMP450 the minimum is 1 control slot, others minimum is zero. Maximum control slots is 15." ::={whispApsRFConfigRadioEntry 4} radioTransmitOutputPower OBJECT-TYPE SYNTAX INTEGER UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Transmitter output power." ::={whispApsRFConfigRadioEntry 5} radioColorCode OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "Color code." ::={whispApsRFConfigRadioEntry 6} whispLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF WhispLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of link test results" ::= {whispAps 4} whispLinkEntry OBJECT-TYPE SYNTAX WhispLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of link test results" INDEX {linkLUID} ::= {whispLinkTable 1} WhispLinkEntry ::= SEQUENCE{ linkLUID INTEGER, linkDescr DisplayString, linkPhysAddress PhysAddress, linkMtu INTEGER, linkSpeed Gauge32, linkOperStatus INTEGER, linkInOctets Counter32, linkInUcastPkts Counter32, linkInNUcastPkts Counter32, linkInDiscards Counter32, linkInError Counter32, linkInUnknownProtos Counter32, linkOutOctets Counter32, linkOutUcastPkts Counter32, linkOutNUcastPkts Counter32, linkOutDiscards Counter32, linkOutError Counter32, linkOutQLen Gauge32, linkSessState INTEGER, linkESN PhysAddress, linkRSSI INTEGER, linkAveJitter Gauge32, linkLastJitter Gauge32, linkAirDelay INTEGER, linkRegCount INTEGER, linkReRegCount INTEGER, linkTimeOut INTEGER, linkLastRSSI INTEGER, sessionCount INTEGER, softwareVersion DisplayString, softwareBootVersion DisplayString, fpgaVersion DisplayString, linkSiteName DisplayString, avgPowerLevel DisplayString, lastPowerLevel DisplayString, sesDownLinkRate INTEGER, sesDownLinkLimit INTEGER, sesUpLinkRate INTEGER, sesUpLinkLimit INTEGER, adaptRate DisplayString, sesLoUpCIR INTEGER, sesLoDownCIR INTEGER, sesHiUpCIR INTEGER, sesHiDownCIR INTEGER, platformVer INTEGER, smSessionTmr TimeTicks, smSessionSeqNumMismatch Counter32, dataVCNum INTEGER, hiPriQEn INTEGER, dataVCNumHiQ INTEGER, linkInOctetsHiQ Counter32, linkInUcastPktsHiQ Counter32, linkInNUcastPktsHiQ Counter32, linkInDiscardsHiQ Counter32, linkInErrorHiQ Counter32, linkInUnknownProtosHiQ Counter32, linkOutOctetsHiQ Counter32, linkOutUcastPktsHiQ Counter32, linkOutNUcastPktsHiQ Counter32, linkOutDiscardsHiQ Counter32, linkOutErrorHiQ Counter32, vcQOverflow Counter32, vcQOverflowHiQ Counter32, p7p8HiPriQEn INTEGER, p7p8HiPriQ Counter32, linkAirDelayns INTEGER, linkQualityAPData DisplayString, linkManagementIP IpAddress, linkFragmentsReceived1XVertical Counter32, linkFragmentsReceived2XVertical Counter32, linkFragmentsReceived3XVertical Counter32, linkFragmentsReceived4XVertical Counter32, signalToNoiseRatioVertical INTEGER, radiusReplyMsg DisplayString, autoUpdateStatus INTEGER, radiusFramedIPAddress IpAddress, radiusFramedIPNetmask IpAddress, radiusDefaultGateway IpAddress, linkFragmentsReceived1XHorizontal Counter32, linkFragmentsReceived2XHorizontal Counter32, linkFragmentsReceived3XHorizontal Counter32, linkFragmentsReceived4XHorizontal Counter32, signalToNoiseRatioHorizontal INTEGER, linkSignalStrengthRatio DisplayString, linkRadioDbmHorizontal DisplayString, linkRadioDbmVertical DisplayString, maxSMTxPwr INTEGER, productType INTEGER, linkAdaptRateLowPri INTEGER, linkAdaptRateHighPri INTEGER } linkLUID OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "LUID number." ::={whispLinkEntry 1} linkDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual string containing information about the unit. This string should include the name of the manufacturer, the product name and the version of the hardware interface." ::={whispLinkEntry 2} linkPhysAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Physical Address of the unit." ::={whispLinkEntry 3} linkMtu OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface." ::={whispLinkEntry 4} linkSpeed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth." ::={whispLinkEntry 5} linkOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3)} MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This variable is not used." ::={whispLinkEntry 6} linkInOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the interface, including framing characters." ::={whispLinkEntry 7} linkInUcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of subnetwork-unicast packets delivered to a higher-layer protocol." ::={whispLinkEntry 8} linkInNUcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol." ::={whispLinkEntry 9} linkInDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space." ::={whispLinkEntry 10} linkInError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol." ::={whispLinkEntry 11} linkInUnknownProtos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received via the interface which were discarded because of an unknown or unsupported protocol." ::={whispLinkEntry 12} linkOutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of the interface, including framing characters." ::={whispLinkEntry 13} linkOutUcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent." ::={whispLinkEntry 14} linkOutNUcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent." ::={whispLinkEntry 15} linkOutDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space." ::={whispLinkEntry 16} linkOutError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets that could not be transmitted because of errors." ::={whispLinkEntry 17} linkOutQLen OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets in output packet queue." ::={whispLinkEntry 18} linkSessState OBJECT-TYPE SYNTAX INTEGER { idle(0), inSession(1), clearing(2), reRegDnRst(3), authChal(4), registering(5), notInUse(6)} MAX-ACCESS read-only STATUS current DESCRIPTION "Current operational state of an interface. 0 = Idle 1 = In Session 2 = Clearing 3 = Re-registration downlink reset 4 = Authentication Challenge 5 = Registering 6 = Not in use" ::={whispLinkEntry 19} linkESN OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Link Electronic serial number. It is MAC address." ::={whispLinkEntry 20} linkRSSI OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The average RSSI reading of all packets received from an SM. Applicable to FSK radios only." ::={whispLinkEntry 21} linkAveJitter OBJECT-TYPE SYNTAX Gauge32 (0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "The average Jitter reading of all packets received from an SM. Applicable to FSK radios only." ::={whispLinkEntry 22} linkLastJitter OBJECT-TYPE SYNTAX Gauge32 (0..15) MAX-ACCESS read-only STATUS current DESCRIPTION "Last jitter value. Applicable to FSK radios only." ::={whispLinkEntry 23} linkAirDelay OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The current round trip air delay in bits measured between the AP and SM." ::={whispLinkEntry 24} linkRegCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times an SM has registered to an AP." ::={whispLinkEntry 25} linkReRegCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times an SM has tried to register with the AP while it still has an active session with the AP." ::={whispLinkEntry 26} linkTimeOut OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Link time out." ::={whispLinkEntry 27} linkLastRSSI OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The last RSSI reading of all packets received from an SM. Applicable to FSK radios only." ::={whispLinkEntry 28} sessionCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "How many times has this mac been in/out of session." ::={whispLinkEntry 29} softwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The software version of registered SM." ::={whispLinkEntry 30} softwareBootVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The software boot version of registered SM." ::={whispLinkEntry 31} fpgaVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The FPGA version of registered SM." ::={whispLinkEntry 32} linkSiteName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The site name of the registered SM." ::={whispLinkEntry 33} avgPowerLevel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The average power level of registered SM. For systems that support power control, this value can read 'NA' when the AP adjusts the transmit power of a SM until new packets are received from the SM with it transmitting at its new power level. For MIMO this is the combined receive power." ::={whispLinkEntry 34} lastPowerLevel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The last power level of registered SM. For MIMO radios this is the combined receive power." ::={whispLinkEntry 35} sesDownLinkRate OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Down link rate." ::={whispLinkEntry 36} sesDownLinkLimit OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Down link limit." ::={whispLinkEntry 37} sesUpLinkRate OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Uplink rate." ::={whispLinkEntry 38} sesUpLinkLimit OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Uplink limit." ::={whispLinkEntry 39} adaptRate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Adapt rate of registered SM." ::={whispLinkEntry 40} sesLoUpCIR OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Low priority up link CIR." ::={whispLinkEntry 41} sesLoDownCIR OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Low priority down link CIR." ::={whispLinkEntry 42} sesHiUpCIR OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "High priority up link CIR." ::={whispLinkEntry 43} sesHiDownCIR OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "High priority down link CIR." ::={whispLinkEntry 44} platformVer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Platform Version." ::={whispLinkEntry 45} smSessionTmr OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "SM session uptime" ::={whispLinkEntry 46} smSessionSeqNumMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The count of how many sequence number mismatch between the AP/BHM and the SM/BHS during the authentication challenge and authentication response messages. This status is only valid in a system where encryption is enabled and no authentication server is configured." ::={whispLinkEntry 47} dataVCNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The normal priority Data VC number in use for this link." ::={whispLinkEntry 48} hiPriQEn OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "Returns whether High Priority channel is enabled. On P7/P8 devices will return 0 always. Use p7p8HiPriQEn OID for P7/P8 radios." ::={whispLinkEntry 49} dataVCNumHiQ OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The high priority Data VC number in use for this link, if any. If 0, no High Priority channel is in place." ::={whispLinkEntry 50} linkInOctetsHiQ OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on High Priority Queue, including framing characters." ::={whispLinkEntry 51} linkInUcastPktsHiQ OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of subnetwork-unicast packets on High Priority Queue delivered to a higher-layer protocol." ::={whispLinkEntry 52} linkInNUcastPktsHiQ OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets on High Priority Queue delivered to a higher-layer protocol." ::={whispLinkEntry 53} linkInDiscardsHiQ OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets on High Priority Queue which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space." ::={whispLinkEntry 54} linkInErrorHiQ OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound packets on High Priority Queue that contained errors preventing them from being deliverable to a higher-layer protocol." ::={whispLinkEntry 55} linkInUnknownProtosHiQ OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received on High Priority Queue via the interface which were discarded because of an unknown or unsupported protocol." ::={whispLinkEntry 56} linkOutOctetsHiQ OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets on High Priority Queue transmitted out of the interface, including framing characters." ::={whispLinkEntry 57} linkOutUcastPktsHiQ OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets on High Priority Queue that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent." ::={whispLinkEntry 58} linkOutNUcastPktsHiQ OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets on High Priority Queue that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent." ::={whispLinkEntry 59} linkOutDiscardsHiQ OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets on High Priority Queue which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space." ::={whispLinkEntry 60} linkOutErrorHiQ OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound packets on High Priority Queue that could not be transmitted because of errors." ::={whispLinkEntry 61} vcQOverflow OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets dropped due to Queue overflow on VC." ::={whispLinkEntry 62} vcQOverflowHiQ OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets dropped due to Queue overflow on High Priority VC, if enabled." ::={whispLinkEntry 63} p7p8HiPriQEn OBJECT-TYPE SYNTAX INTEGER { disabled-or-NA(0), enabled(1)} MAX-ACCESS read-only STATUS current DESCRIPTION "Returns whether P7/P8 hi priority channel is enabled. On non-P7/P8 devices will return 0 always." ::={whispLinkEntry 64} p7p8HiPriQ OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Hi Priority Queue statistics for P7 or P8 radios, if enabled. If not enabled, or not a P7 or P8, will return 0." ::={whispLinkEntry 65} linkAirDelayns OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The current round trip air delay in nanoseconds measured between the AP and SM." ::={whispLinkEntry 66} linkQualityAPData OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current link quality of the SM's data from the AP. This is relative to the current modulation rate (1X, 2X, 3X, etc)." ::={whispLinkEntry 67} linkManagementIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Management IP Address of the unit. 0 indicates SM is not publically addressable." ::={whispLinkEntry 69} linkFragmentsReceived1XVertical OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Engineering use only. Number of fragments received in 1x (QPSK) modulation. For GenII OFDM and forward. For MIMO this is the vertical path." ::={whispLinkEntry 70} linkFragmentsReceived2XVertical OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Engineering use only. Number of fragments received in 2x (16-QAM) modulation. For GenII OFDM and forward. For MIMO this is the vertical path." ::={whispLinkEntry 71} linkFragmentsReceived3XVertical OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Engineering use only. Number of fragments received in 3x (64-QAM) modulation. For GenII OFDM and forward. For MIMO this is the vertical path." ::={whispLinkEntry 72} linkFragmentsReceived4XVertical OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Engineering use only. Number of fragments received in 4x (256-QAM) modulation. For GenII OFDM and forward. For MIMO this is the vertical path." ::={whispLinkEntry 73} signalToNoiseRatioVertical OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Estimate of the receive signal to noise ratio in dB. For GenII OFDM and forward. For MIMO this is the vertical path." ::={whispLinkEntry 74} radiusReplyMsg OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The RADIUS Reply-Msg populated for the SM. This is only valid when using a backen AAA server." ::={whispLinkEntry 75} autoUpdateStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "status of the auto update process" ::={whispLinkEntry 76} radiusFramedIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This Attribute indicates the IP address to be configured for the SM management interface." ::={whispLinkEntry 77} radiusFramedIPNetmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This Attribute indicates the netmask to be configured for the SM management interface." ::={whispLinkEntry 78} radiusDefaultGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This Attribute indicates the default gateway to be configured for the SM management interface." ::={whispLinkEntry 79} linkFragmentsReceived1XHorizontal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Engineering use only. Number of fragments received in 1x (QPSK) modulation. For MIMO only. For MIMO this is the horizontal path." ::={whispLinkEntry 80} linkFragmentsReceived2XHorizontal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Engineering use only. Number of fragments received in 2x (16-QAM) modulation. For MIMO only. For MIMO this is the horizontal path." ::={whispLinkEntry 81} linkFragmentsReceived3XHorizontal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Engineering use only. Number of fragments received in 3x (64-QAM) modulation. For MIMO only. For MIMO this is the horizontal path." ::={whispLinkEntry 82} linkFragmentsReceived4XHorizontal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Engineering use only. Number of fragments received in 4x (256-QAM) modulation. For MIMO only. For MIMO this is the horizontal path." ::={whispLinkEntry 83} signalToNoiseRatioHorizontal OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Estimate of the receive signal to noise ratio in dB. MIMO radios only. For MIMO this is the horizontal path." ::={whispLinkEntry 84} linkSignalStrengthRatio OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Signal Strength Ratio in dB is the power received by the vertical antenna input (dB) - power received by the horizontal antenna input (dB). MIMO radios only." ::={whispLinkEntry 86} linkRadioDbmHorizontal OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Receive power level of the horizontal antenna in dBm. MIMO radios only." ::={whispLinkEntry 87} linkRadioDbmVertical OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Receive power level of the vertical antenna in dBm. MIMO radios only." ::={whispLinkEntry 88} maxSMTxPwr OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Returns whether SM is transmitting at its configured max power level." ::={whispLinkEntry 89} productType OBJECT-TYPE SYNTAX INTEGER { unknown(0), pmp450MIMOOFDM(1), pmp430SISOOFDM(2), pmp450SISOOFDM(3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Returns which type of product the SM is. PMP450 APs only." ::={whispLinkEntry 90} linkAdaptRateLowPri OBJECT-TYPE SYNTAX INTEGER { noSession(0), rate1X(1), rate2X(2), rete3X(3), rate4X(4), rate6X(6), rate8X(8)} MAX-ACCESS read-only STATUS current DESCRIPTION "The current transmitting rate of the low priority VC. 0 : SM is not in session 1 : 1X QPSK SISO 2 : 2X 16-QAM SISO or QPSK MIMO 3 : 3X 64-QAM SISO 4 : 4X 256-QAM SISO or 16-QAM MIMO 6 : 6X 64-QAM MIMO 8 : 8X 256-QAM MIMO" ::={whispLinkEntry 91} linkAdaptRateHighPri OBJECT-TYPE SYNTAX INTEGER { noHighPriorityChannel(-1), noSession(0), rate1X(1), rate2X(2), rete3X(3), rate4X(4), rate6X(6), rate8X(8)} MAX-ACCESS read-only STATUS current DESCRIPTION "The current transmitting rate of the high priority VC. -1 : High Priority Channel not configured 0 : SM is not in session 1 : 1X QPSK SISO 2 : 2X 16-QAM SISO or QPSK MIMO 3 : 3X 64-QAM SISO 4 : 4X 256-QAM SISO or 16-QAM MIMO 6 : 6X 64-QAM MIMO 8 : 8X 256-QAM MIMO" ::={whispLinkEntry 92} whispFailedRegTable OBJECT-TYPE SYNTAX SEQUENCE OF WhispFailedRegEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of link test results" ::= {whispAps 8} whispFailedRegEntry OBJECT-TYPE SYNTAX WhispFailedRegEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of Failed ESNs" INDEX {regFailSeqNum} ::= {whispFailedRegTable 1} WhispFailedRegEntry ::= SEQUENCE{ regFailSeqNum Counter32, regFailESN PhysAddress, regGrantReason INTEGER, regFailTime TimeTicks, regFailReasonText DisplayString } regGrantReason OBJECT-TYPE SYNTAX INTEGER { reggnt-valid(0), reggnt-outofrange(1), reggnt-nolUIDS(2), reggnt-rerange(3), reggnt-authfail(4), reggnt-encryptfail(5), reggnt-poweradjust(6), reggnt-novcs(7), reggnt-failvcreserve(8), reggnt-failvcactive(9), reggnt-failhivcdata(10), reggnt-failsmlimit(11), reggnt-fail95orabove(12)} MAX-ACCESS read-only STATUS current DESCRIPTION "The registration failure reason" ::={whispFailedRegEntry 1} regFailESN OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The ESN that failed to register" ::={whispFailedRegEntry 2} regFailTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ticks that occurred when the ESN failed to register" ::={whispFailedRegEntry 3} regFailSeqNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence when the register failure was given." ::={whispFailedRegEntry 4} regFailReasonText OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The text description of the failure." ::={whispFailedRegEntry 5} END