source: Extensions/Agent-Setup.md

The agent can be used to gather data from remote systems you can use LibreNMS in combination with check_mk (found [here](https://github.com/librenms/librenms-agent)).
The agent can be extended to include data about [applications](Applications.md) on the remote system.

Make sure that systemd or xinetd is installed on the host you want to run the agent on.

The agent uses TCP-Port 6556, please allow access from the **LibreNMS host** and **poller nodes** if you're using the [Distributed Polling](http://docs.librenms.org/Extensions/Distributed-Poller/) setup.

On each of the hosts you would like to use the agent on, you need to do the following:

1. Clone the `librenms-agent` repository:

```shell
cd /opt/
git clone https://github.com/librenms/librenms-agent.git
cd librenms-agent
```

2. Copy the relevant check_mk_agent to `/usr/bin`:

| linux | freebsd |
| --- | --- |
| `cp check_mk_agent /usr/bin/check_mk_agent` | `cp check_mk_agent_freebsd /usr/bin/check_mk_agent` |

```shell
chmod +x /usr/bin/check_mk_agent
```

3. Copy the service file(s) into place.

| xinetd | systemd |
| --- | --- |
| `cp check_mk_xinetd /etc/xinetd.d/check_mk` | `cp check_mk@.service check_mk.socket /etc/systemd/system` |

4. Create the relevant directories.

```shell
mkdir -p /usr/lib/check_mk_agent/plugins /usr/lib/check_mk_agent/local
```

5. Copy each of the scripts from `agent-local/` into `/usr/lib/check_mk_agent/local` that you require to be graphed.  You can find detail setup instructions for specific applications above.
6. Make each one executable that you want to use with `chmod +x /usr/lib/check_mk_agent/local/$script`
7. Enable the check_mk service

| xinetd | systemd |
| --- | --- |
| `/etc/init.d/xinetd restart` | `systemctl enable check_mk.socket && systemctl start check_mk.socket` |

8. Login to the LibreNMS web interface and edit the device you want to monitor. Under the modules section, ensure that unix-agent is enabled.
9. Then under Applications, enable the apps that you plan to monitor.
10. Wait for around 10 minutes and you should start seeing data in your graphs under Apps for the device.