mirror of
https://github.com/librenms/librenms.git
synced 2024-10-07 16:52:45 +00:00
7445a736a6
git-svn-id: http://www.observium.org/svn/observer/trunk@1576 61d68cd4-352d-0410-923a-c4978735b2b8
714 lines
20 KiB
Plaintext
714 lines
20 KiB
Plaintext
|
|
S5-ETH-MULTISEG-TOPOLOGY-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, IpAddress, TimeTicks
|
|
FROM SNMPv2-SMI
|
|
SnpxChassisType, SnpxBackplaneType
|
|
FROM SYNOPTICS-ROOT-MIB
|
|
s5EnMsTop
|
|
FROM S5-ROOT-MIB
|
|
MacAddress
|
|
FROM SNMPv2-TC;
|
|
|
|
s5EthMultisegTopologyMib MODULE-IDENTITY
|
|
LAST-UPDATED "200407200000Z"
|
|
ORGANIZATION "Nortel Networks"
|
|
CONTACT-INFO "Nortel Networks"
|
|
DESCRIPTION
|
|
"5000 Ethernet Multi-segment MIB
|
|
|
|
Copyright 1993-2004 Nortel Networks, Inc.
|
|
All rights reserved.
|
|
This Nortel Networks SNMP Management Information Base Specification
|
|
(Specification) embodies Nortel Networks' confidential and
|
|
proprietary intellectual property. Nortel Networks retains all
|
|
title and ownership in the Specification, including any
|
|
revisions.
|
|
|
|
This Specification is supplied 'AS IS,' and Nortel Networks makes
|
|
no warranty, either express or implied, as to the use,
|
|
operation, condition, or performance of the Specification."
|
|
|
|
REVISION "200407200000Z" -- 20 July 2004
|
|
DESCRIPTION "Version 106: Conversion to SMIv2"
|
|
|
|
::= { s5EnMsTop 0 }
|
|
|
|
-- Groups
|
|
|
|
s5EnMsTopInfo OBJECT IDENTIFIER ::= { s5EnMsTop 1 }
|
|
|
|
s5EnMsTopNmm OBJECT IDENTIFIER ::= { s5EnMsTop 2 }
|
|
|
|
s5EnMsTopBdg OBJECT IDENTIFIER ::= { s5EnMsTop 3 }
|
|
|
|
s5EnMsTopSrcMac OBJECT IDENTIFIER ::= { s5EnMsTop 4 }
|
|
|
|
-- SECTION 2: MIB Objects
|
|
|
|
-- Topology Status and Configuration Information
|
|
|
|
s5EnMsTopIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An IP address of the agent. This is used to fill
|
|
in the IP address field of transmitted SONMP packets.
|
|
The agent should be reachable through this IP address."
|
|
::= { s5EnMsTopInfo 1 }
|
|
|
|
s5EnMsTopStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
topOn(1),
|
|
topOff(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if the agent is participating in
|
|
multi-segment topology. The values are:
|
|
topOn(1)....topology is on
|
|
topOff(2)...topology is off
|
|
When the value is topOff(2) the status of
|
|
topology table entries is undefined. However, the
|
|
agent should make its best attempt when the value is
|
|
changed to topOff(2) to remove all existing instances
|
|
of topology MIB objects. The agent must save the
|
|
setting of this object in nonvolatile memory (i.e.,
|
|
save across reboots)."
|
|
DEFVAL { topOn }
|
|
::= { s5EnMsTopInfo 2 }
|
|
|
|
s5EnMsTopNmmLstChg OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime the last time an entry in the
|
|
NMM topology table was added, deleted, or modified. If
|
|
the NMM topology table has not changed since cold/warm
|
|
start of the agent, then the value is zero."
|
|
::= { s5EnMsTopInfo 3 }
|
|
|
|
s5EnMsTopBdgLstChg OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The value of sysUpTime the last time an entry in the
|
|
bridge topology table was added, deleted, or modified.
|
|
If the bridge topology table has not changed since
|
|
cold/warm start of the agent, then the value is zero."
|
|
::= { s5EnMsTopInfo 4 }
|
|
|
|
s5EnMsTopNmmMaxNum OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of entries in the NMM topology
|
|
table."
|
|
::= { s5EnMsTopInfo 5 }
|
|
|
|
s5EnMsTopNmmCurNum OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current number of entries in the NMM topology
|
|
table."
|
|
::= { s5EnMsTopInfo 6 }
|
|
|
|
s5EnMsTopBdgMaxNum OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The maximum number of entries in the bridge topology
|
|
table."
|
|
::= { s5EnMsTopInfo 7 }
|
|
|
|
s5EnMsTopBdgCurNum OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The current number of entries in the bridge topology
|
|
table."
|
|
::= { s5EnMsTopInfo 8 }
|
|
|
|
-- Network Management Module (NMM) Topology Table
|
|
|
|
s5EnMsTopNmmTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF S5EnMsTopNmmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of topology information from each topology
|
|
agent that sends out NMM topology messages, and that
|
|
has been heard by the reporting topology agent. The
|
|
number of entries is determined by the number of
|
|
distinct topology messages received. A topology
|
|
message is identified by a combination of the IP
|
|
address and segment-identifier contained in the
|
|
message, and the slot-port on which it is received.
|
|
Entries in the table are created by reception of a
|
|
'new' NMM topology message. An entry is removed from
|
|
the table after no messages are received from the
|
|
corresponding topology agent in the required time
|
|
interval.
|
|
|
|
NOTE: there is an entry for the reporting agent with
|
|
the values of slot and port set to zero."
|
|
::= { s5EnMsTopNmm 1 }
|
|
|
|
s5EnMsTopNmmEntry OBJECT-TYPE
|
|
SYNTAX S5EnMsTopNmmEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the NMM topology table. Entries in the table
|
|
can not be created or deleted via SNMP."
|
|
INDEX { s5EnMsTopNmmSlot,
|
|
s5EnMsTopNmmPort,
|
|
s5EnMsTopNmmIpAddr,
|
|
s5EnMsTopNmmSegId }
|
|
::= { s5EnMsTopNmmTable 1 }
|
|
|
|
S5EnMsTopNmmEntry ::= SEQUENCE {
|
|
s5EnMsTopNmmSlot INTEGER,
|
|
s5EnMsTopNmmPort INTEGER,
|
|
s5EnMsTopNmmIpAddr IpAddress,
|
|
s5EnMsTopNmmSegId INTEGER,
|
|
s5EnMsTopNmmMacAddr MacAddress,
|
|
s5EnMsTopNmmChassisType SnpxChassisType,
|
|
s5EnMsTopNmmBkplType SnpxBackplaneType,
|
|
s5EnMsTopNmmLocalSeg INTEGER,
|
|
s5EnMsTopNmmCurState INTEGER
|
|
}
|
|
|
|
s5EnMsTopNmmSlot OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slot on which the topology message
|
|
was received.
|
|
|
|
NOTE: There is an artificial 'row' for the reporting
|
|
agent with slot and port equal to zero.
|
|
|
|
NOTE: Non-modular devices that do not have multiple
|
|
slots should set this value to 1."
|
|
::= { s5EnMsTopNmmEntry 1 }
|
|
|
|
s5EnMsTopNmmPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port on which the topology message
|
|
was received.
|
|
|
|
NOTE: there is an artificial 'row' for the reporting
|
|
agent with slot and port equal to zero."
|
|
::= { s5EnMsTopNmmEntry 2 }
|
|
|
|
s5EnMsTopNmmIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the sender of the topology message."
|
|
::= { s5EnMsTopNmmEntry 3 }
|
|
|
|
s5EnMsTopNmmSegId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..'FFFFFF'H)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 'segment identifier' of the segment from which
|
|
the remote agent sent the topology message. The value
|
|
is extracted from the received topology message.
|
|
Different devices may use different methods for
|
|
representing the segment identifier. For example,
|
|
system 5000 NMMs that run multi-segment autotopology use
|
|
the SrcIndx of the segment as the segment identifier;
|
|
switches use a computed a value equal to '(256 * s) + p'
|
|
where 's' is the board, card or slot number and 'p' is
|
|
the port number on and as seen by the switch sending the
|
|
topology message;
|
|
system 3000 NMMs use the lower three bytes of the MAC
|
|
address of the NMM as the segment identifier. In any
|
|
case, the 'segment identifier' uniquely identifies the
|
|
network segment in the remote device from which
|
|
the topology message was sent."
|
|
::= { s5EnMsTopNmmEntry 4 }
|
|
|
|
s5EnMsTopNmmMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the sender of the topology message."
|
|
::= { s5EnMsTopNmmEntry 5 }
|
|
|
|
s5EnMsTopNmmChassisType OBJECT-TYPE
|
|
SYNTAX SnpxChassisType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The chassis type of the device that sent the topology
|
|
message."
|
|
::= { s5EnMsTopNmmEntry 6 }
|
|
|
|
s5EnMsTopNmmBkplType OBJECT-TYPE
|
|
SYNTAX SnpxBackplaneType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The backplane type of the device that sent the
|
|
topology message."
|
|
::= { s5EnMsTopNmmEntry 7 }
|
|
|
|
s5EnMsTopNmmLocalSeg OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(1),
|
|
false(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if the sender of the topology message is on
|
|
the same Ethernet segment (i.e., NOT across a bridge)
|
|
as the reporting agent."
|
|
::= { s5EnMsTopNmmEntry 8 }
|
|
|
|
s5EnMsTopNmmCurState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
topChanged(1),
|
|
heartbeat(2),
|
|
new(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of sender of the
|
|
topology message. The values are:
|
|
topChanged(1)...topology information has
|
|
recently changed
|
|
heartbeat(2)....topology information unchanged
|
|
new(3)..........sending agent is in new state."
|
|
::= { s5EnMsTopNmmEntry 9 }
|
|
|
|
-- Encoded Octet Strings for NMM Topology Table
|
|
|
|
s5EnMsTopNmmEosSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1440)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current size of a 'row' in the table
|
|
s5EnMsTopNmmEosTable. This allows applications
|
|
to be able to break apart 'rows' in the table."
|
|
::= { s5EnMsTopNmm 2 }
|
|
|
|
s5EnMsTopNmmEosTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF S5EnMsTopNmmEosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of encoded octet strings of
|
|
entries in table s5EnMsTopNmmTable.
|
|
The number of entries is determined by
|
|
packing of 'rows' from s5EnMsTopNmmTable."
|
|
::= { s5EnMsTopNmm 3 }
|
|
|
|
s5EnMsTopNmmEosEntry OBJECT-TYPE
|
|
SYNTAX S5EnMsTopNmmEosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A row in the table of encoded octet
|
|
strings for table s5EnMsTopNmmTable.
|
|
Instance returned in Response PDU:
|
|
On GETs: instance specified is the
|
|
instance returned.
|
|
On GET-NEXTs: instance returned is the
|
|
instance of the last record
|
|
contained in the octet string.
|
|
|
|
Entries in the table can not be created
|
|
or deleted via SNMP."
|
|
INDEX { s5EnMsTopNmmSlot,
|
|
s5EnMsTopNmmPort,
|
|
s5EnMsTopNmmIpAddr,
|
|
s5EnMsTopNmmSegId }
|
|
::= { s5EnMsTopNmmEosTable 1 }
|
|
|
|
S5EnMsTopNmmEosEntry ::= SEQUENCE {
|
|
s5EnMsTopNmmEos OCTET STRING
|
|
}
|
|
|
|
s5EnMsTopNmmEos OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1400))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An encoded octet string. On reads it contains
|
|
an integral number of 'rows' from table
|
|
s5EnMsTopNmmTable. All 'rows' are the same size
|
|
which is defined by object s5EnMsTopNmmEosSize."
|
|
::= { s5EnMsTopNmmEosEntry 1 }
|
|
|
|
-- Bridge Topology Table
|
|
|
|
s5EnMsTopBdgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF S5EnMsTopBdgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A table of topology information from each Bridge in
|
|
the network that is sending bridge topology messages
|
|
that have been heard by the reporting agent. The
|
|
number of entries is determined by the number of
|
|
detected (and active) bridges. Entries in the table
|
|
are created by reception of a topology message from a
|
|
'new' bridge. An entry is removed from the table
|
|
after no messages are received from the corresponding
|
|
bridge in the required time interval."
|
|
::= { s5EnMsTopBdg 1 }
|
|
|
|
s5EnMsTopBdgEntry OBJECT-TYPE
|
|
SYNTAX S5EnMsTopBdgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A row in the bridge topology table. Entries in the
|
|
table can not be created or deleted via SNMP."
|
|
INDEX { s5EnMsTopBdgSlotNum,
|
|
s5EnMsTopBdgPortNum,
|
|
s5EnMsTopBdgIpAddr }
|
|
::= { s5EnMsTopBdgTable 1 }
|
|
|
|
S5EnMsTopBdgEntry ::= SEQUENCE {
|
|
s5EnMsTopBdgSlotNum INTEGER,
|
|
s5EnMsTopBdgPortNum INTEGER,
|
|
s5EnMsTopBdgIpAddr IpAddress,
|
|
s5EnMsTopBdgNumber INTEGER,
|
|
s5EnMsTopBdgMacAddr MacAddress,
|
|
s5EnMsTopBdgType INTEGER,
|
|
s5EnMsTopBdgStatus INTEGER,
|
|
s5EnMsTopBdgNumPorts Integer32,
|
|
s5EnMsTopBdgHelloPortNum INTEGER,
|
|
s5EnMsTopBdgHelloPortType INTEGER,
|
|
s5EnMsTopBdgHelloPortStatus INTEGER,
|
|
s5EnMsTopBdgCompBdgMac1 MacAddress,
|
|
s5EnMsTopBdgCompBdgMac2 MacAddress
|
|
}
|
|
|
|
s5EnMsTopBdgSlotNum OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The slot on which the topology message was
|
|
received.
|
|
|
|
NOTE: Non-modular devices that do not have multiple
|
|
slots should set this value to 1."
|
|
::= { s5EnMsTopBdgEntry 1 }
|
|
|
|
s5EnMsTopBdgPortNum OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The port on which the topology message was received."
|
|
::= { s5EnMsTopBdgEntry 2 }
|
|
|
|
s5EnMsTopBdgIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The IP address of the bridge that sent the
|
|
topology message."
|
|
::= { s5EnMsTopBdgEntry 3 }
|
|
|
|
s5EnMsTopBdgNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The 'Bridge Number' of the bridge that sent
|
|
the topology message. This is the IEEE 802.1
|
|
bridge number."
|
|
::= { s5EnMsTopBdgEntry 4 }
|
|
|
|
s5EnMsTopBdgMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The MAC Address of the bridge that sent the
|
|
topology message."
|
|
::= { s5EnMsTopBdgEntry 5 }
|
|
|
|
s5EnMsTopBdgType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
localSyn(2),
|
|
remoteSyn(3),
|
|
kalpana(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The 'kind of bridge' that sent the topology
|
|
message. The values are:
|
|
other(1).....unknown or other type
|
|
locSyn(2)....local SynOptics bridge
|
|
remSyn(3)....remote SynOptics bridge
|
|
kalpana(4)...Kalpana bridge(switch)
|
|
"
|
|
::= { s5EnMsTopBdgEntry 6 }
|
|
|
|
s5EnMsTopBdgNumPorts OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of ports on the bridge."
|
|
::= { s5EnMsTopBdgEntry 7 }
|
|
|
|
s5EnMsTopBdgStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
active(2),
|
|
standby(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The current operational status from the bridge
|
|
that sent the topology message. The values are:
|
|
other(1).....unknown or other
|
|
active(2)....bridge is active
|
|
standby(3)...bridge is in standby
|
|
|
|
A value of standby(3) means that at least ONE port
|
|
is in standby mode. A value of active(2) means NO
|
|
port is in standby mode."
|
|
::= { s5EnMsTopBdgEntry 8 }
|
|
|
|
s5EnMsTopBdgHelloPortNum OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The port number used by the bridge to
|
|
send the topology message. This port may
|
|
or may not be in standby mode."
|
|
::= { s5EnMsTopBdgEntry 9 }
|
|
|
|
s5EnMsTopBdgHelloPortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
eth(2),
|
|
tok4(3),
|
|
tok16(4),
|
|
fddi(5),
|
|
t1(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The type of the port used by the bridge to
|
|
send the topology message. The values are:
|
|
other(1)...other or unknown type
|
|
eth(2).....ethernet
|
|
tok4(3)....4 Mbit token ring
|
|
tok16(4)...16 Mbit token ring
|
|
fddi(5)....fddi
|
|
t1(6)......t1
|
|
|
|
Note: These enumerations were done for
|
|
'completeness'. No other value than eth(2)
|
|
should ever be received by an ethernet agent."
|
|
::= { s5EnMsTopBdgEntry 10 }
|
|
|
|
s5EnMsTopBdgHelloPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
active(2),
|
|
standby(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The status of the port used by the bridge
|
|
to send the topology message. The values are:
|
|
other(1).....unknown or other
|
|
active(2)....port is active
|
|
standby(3)...port is in standby"
|
|
::= { s5EnMsTopBdgEntry 11 }
|
|
|
|
s5EnMsTopBdgCompBdgMac1 OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The first MAC address of a companion bridge
|
|
of the bridge that sent the topology message.
|
|
The value is 00:00:00:00:00:00 for local
|
|
bridges (since there is no companion bridge)
|
|
and also when the companion MAC address
|
|
is unknown for remote bridges."
|
|
::= { s5EnMsTopBdgEntry 12 }
|
|
|
|
s5EnMsTopBdgCompBdgMac2 OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The second MAC address of a companion bridge
|
|
of the bridge that sent the topology message.
|
|
The value is 00:00:00:00:00:00 for local
|
|
bridges (since there is no companion bridge)
|
|
and also when the companion MAC address
|
|
is unknown for remote bridges."
|
|
::= { s5EnMsTopBdgEntry 13 }
|
|
|
|
-- Encoded Octet Strings for Bridge Topology Table
|
|
|
|
s5EnMsTopBdgEosSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1440)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The current size of a 'row' in the table
|
|
s5EnMsTopBdgEosTable. This allows applications
|
|
to be able to break apart 'rows' in the table."
|
|
::= { s5EnMsTopBdg 2 }
|
|
|
|
s5EnMsTopBdgEosTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF S5EnMsTopBdgEosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A table of encoded octet strings of
|
|
entries in table s5EnMsTopBdgTable.
|
|
The number of entries is determined by
|
|
packing of 'rows' from s5EnMsTopBdgTable."
|
|
::= { s5EnMsTopBdg 3 }
|
|
|
|
s5EnMsTopBdgEosEntry OBJECT-TYPE
|
|
SYNTAX S5EnMsTopBdgEosEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A row in the table of encoded octet
|
|
strings for table s5EnMsTopBdgTable.
|
|
Instance returned in Response PDU:
|
|
On GETs: instance specified is the
|
|
instance returned.
|
|
On GET-NEXTs: instance returned is the
|
|
instance of the last record
|
|
contained in the octet string.
|
|
|
|
Entries in the table can not be created
|
|
or deleted via SNMP."
|
|
INDEX { s5EnMsTopBdgSlotNum,
|
|
s5EnMsTopBdgPortNum,
|
|
s5EnMsTopBdgIpAddr }
|
|
::= { s5EnMsTopBdgEosTable 1 }
|
|
|
|
S5EnMsTopBdgEosEntry ::= SEQUENCE {
|
|
s5EnMsTopBdgEos OCTET STRING
|
|
}
|
|
|
|
s5EnMsTopBdgEos OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..1400))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"An encoded octet string. On reads it contains
|
|
an integral number of 'rows' from table
|
|
s5EnMsTopBdgTable. All 'rows' are the same size
|
|
which is defined by object s5EnMsTopBdgEosSize."
|
|
::= { s5EnMsTopBdgEosEntry 1 }
|
|
|
|
-- MAC Address-to-Segment Mapping Table
|
|
|
|
-- Implementation of this group is optional. It is supported by those
|
|
-- devices that use different source MAC addresses to transmit
|
|
-- topology messages on different segments.
|
|
|
|
s5EnMsTopSrcMacAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF S5EnMsTopSrcMacAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A table describing the source MAC addresses that the
|
|
agent uses to transmit topology messages on different
|
|
segments in the device. The MAC addresses are
|
|
preallocated and remain unchanged for the agent.
|
|
However, the mapping between a MAC address and segment
|
|
may change, since it can depend on the current
|
|
physical and/or logical configuration of the device.
|
|
|
|
Implementation of this group is required for those
|
|
devices that use different source MAC addresses to
|
|
transmit topology messages on different segments.
|
|
Implementation of this group is optional otherwise."
|
|
::= { s5EnMsTopSrcMac 1 }
|
|
|
|
s5EnMsTopSrcMacAddrEntry OBJECT-TYPE
|
|
SYNTAX S5EnMsTopSrcMacAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A row in the table of MAC address-to-segment mappings.
|
|
Entries in the table can not be created or deleted
|
|
via SNMP."
|
|
INDEX { s5EnMsTopSrcMacAddr }
|
|
::= { s5EnMsTopSrcMacAddrTable 1 }
|
|
|
|
S5EnMsTopSrcMacAddrEntry ::= SEQUENCE {
|
|
s5EnMsTopSrcMacAddr MacAddress,
|
|
s5EnMsTopSrcMacSegId INTEGER
|
|
}
|
|
|
|
s5EnMsTopSrcMacAddr OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The MAC address used to transmit topology messages."
|
|
::= { s5EnMsTopSrcMacAddrEntry 1 }
|
|
|
|
s5EnMsTopSrcMacSegId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The 'segment-identifier' of the segment
|
|
on which topology messages were transmitted."
|
|
::= { s5EnMsTopSrcMacAddrEntry 2 }
|
|
|
|
s5EnMsTopSrcMacAddrLstChg OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The value of sysUpTime when an entry in the
|
|
table s5EnMsTopSrcMacAddrTable was last changed.
|
|
If no changes have been done since cold/warm start
|
|
of the agent, then the value is zero."
|
|
::= { s5EnMsTopSrcMac 2 }
|
|
|
|
END
|