mirror of
https://github.com/librenms/librenms.git
synced 2024-10-07 16:52:45 +00:00
fea1d1ab80
git-svn-id: http://www.observium.org/svn/observer/trunk@2567 61d68cd4-352d-0410-923a-c4978735b2b8
1965 lines
75 KiB
Plaintext
1965 lines
75 KiB
Plaintext
-- ==================================================================
|
||
-- Copyright (C) 2007 by HUAWEI TECHNOLOGIES. All rights reserved.
|
||
--
|
||
-- Description: HUAWEI Private MIB
|
||
-- Reference:
|
||
-- Version: V1.0
|
||
-- History: V1.0 qiyanqing, 2007-05-14, publish
|
||
|
||
-- ==================================================================
|
||
|
||
|
||
HUAWEI-TUNNEL-TE-MIB DEFINITIONS ::= BEGIN
|
||
|
||
IMPORTS
|
||
hwDatacomm
|
||
FROM HUAWEI-MIB
|
||
InterfaceIndex
|
||
FROM IF-MIB
|
||
MplsIndexType
|
||
FROM MPLS-LSR-STD-MIB
|
||
MplsTunnelIndex, MplsTunnelInstanceIndex, MplsExtendedTunnelId
|
||
FROM MPLS-TC-STD-MIB
|
||
SnmpAdminString
|
||
FROM SNMP-FRAMEWORK-MIB
|
||
OBJECT-GROUP, NOTIFICATION-GROUP
|
||
FROM SNMPv2-CONF
|
||
Integer32, Unsigned32, Counter32, Counter64, BITS, OBJECT-TYPE,
|
||
MODULE-IDENTITY, NOTIFICATION-TYPE
|
||
FROM SNMPv2-SMI
|
||
TruthValue, TimeStamp, RowStatus
|
||
FROM SNMPv2-TC;
|
||
|
||
hwTunnelTeMib MODULE-IDENTITY
|
||
LAST-UPDATED "200706101559Z" -- June 10, 2007 at 15:59 GMT
|
||
ORGANIZATION
|
||
"Huawei Technologies Co., Ltd."
|
||
CONTACT-INFO
|
||
"MPLS Team Huawei Technologies co.,Ltd.
|
||
Huawei Bld.,NO.3 Xinxi Rd.,
|
||
Shang-Di Information Industry Base,
|
||
Hai-Dian District Beijing P.R. China
|
||
http://www.huawei.com
|
||
Zip:100085
|
||
"
|
||
DESCRIPTION
|
||
"This MIB contains private managed object
|
||
definitions for the binding information."
|
||
REVISION "200606301554Z" -- June 30, 2006 at 15:54 GMT
|
||
DESCRIPTION
|
||
"Initial version 2006/06/10,MPLS LSPM MIB GROUP."
|
||
::= { hwDatacomm 151 }
|
||
|
||
|
||
|
||
--
|
||
-- Node definitions
|
||
--
|
||
|
||
|
||
hwTunnelTeMibObject OBJECT IDENTIFIER ::= { hwTunnelTeMib 1 }
|
||
|
||
|
||
|
||
hwTunnelDiffServTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF HwTunnelDiffServEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The table describes the different service mode of tunnel."
|
||
::= { hwTunnelTeMibObject 1}
|
||
|
||
|
||
|
||
hwTunnelDiffServEntry OBJECT-TYPE
|
||
SYNTAX HwTunnelDiffServEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Interface different service mode attribute configuration."
|
||
INDEX { hwTunnelDiffServIndex }
|
||
::= {hwTunnelDiffServTable 1}
|
||
|
||
HwTunnelDiffServEntry ::=
|
||
SEQUENCE {
|
||
hwTunnelDiffServIndex
|
||
InterfaceIndex,
|
||
hwTunnelDiffServMode
|
||
INTEGER,
|
||
hwTunnelDiffServServiceClass
|
||
INTEGER,
|
||
hwTunnelDiffServColor
|
||
INTEGER,
|
||
hwTunnelTeFlowQueue
|
||
OCTET STRING
|
||
}
|
||
|
||
|
||
hwTunnelDiffServIndex OBJECT-TYPE
|
||
SYNTAX InterfaceIndex
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Uniquely identifies a set of tunnel instances
|
||
between a pair of ingress and egress LSRs.
|
||
Managers should obtain new values for row
|
||
creation in this table by reading mplsTunnelIndexNext.
|
||
When the MPLS signalling protocol is rsvp(2),this value
|
||
should be equal to the value signalled in the Tunnel ID
|
||
of the session object. When the MPLS signalling protocol
|
||
is crldp(3) this value should be equal to the value
|
||
signalled in the LSP ID. Reference to MPLS-TE-STD-MIB."
|
||
::= { hwTunnelDiffServEntry 1 }
|
||
|
||
hwTunnelDiffServMode OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
pipe(1),
|
||
uniform(2)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Different service mode of TE interface, default is uniform."
|
||
::= { hwTunnelDiffServEntry 2 }
|
||
|
||
hwTunnelDiffServServiceClass OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
be(1),
|
||
af1(2),
|
||
af2(3),
|
||
af3(4),
|
||
af4(5),
|
||
ef(6),
|
||
cs6(7),
|
||
cs7(8),
|
||
invalidClass(255)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"PHB in the ingress PE, the value must be
|
||
be,af1,af2,af3,af4,ef,cs6,cs7.The default class is invalidClass(255)."
|
||
::= { hwTunnelDiffServEntry 3 }
|
||
|
||
|
||
hwTunnelDiffServColor OBJECT-TYPE
|
||
SYNTAX INTEGER
|
||
{
|
||
green(1),
|
||
yellow(2),
|
||
red(3),
|
||
invalidColor(255)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Remarked color of packet in the ingress
|
||
PE, the value must be green,yellow,red.The default color is invalidColor(255)."
|
||
::= { hwTunnelDiffServEntry 4 }
|
||
|
||
hwTunnelTeFlowQueue OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE (0..31))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Name of flow-queue template."
|
||
::= { hwTunnelDiffServEntry 5 }
|
||
|
||
hwTunnelTeVsiTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF HwTunnelTeVsiEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The table describes the VPN binding of Tunnel."
|
||
::= { hwTunnelTeMibObject 2 }
|
||
|
||
|
||
hwTunnelTeVsiEntry OBJECT-TYPE
|
||
SYNTAX HwTunnelTeVsiEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The L2VPN VSI binding configuration of tunnel interface."
|
||
INDEX { hwTunnelTeVsiIndex,hwTunnelTeVsiName }
|
||
::= {hwTunnelTeVsiTable 1}
|
||
|
||
HwTunnelTeVsiEntry ::=
|
||
SEQUENCE {
|
||
hwTunnelTeVsiIndex
|
||
InterfaceIndex,
|
||
hwTunnelTeVsiName
|
||
OCTET STRING,
|
||
hwTunnelTeVsiCir
|
||
Integer32,
|
||
hwTunnelTeVsiPir
|
||
Integer32,
|
||
hwTunnelTeVsiFlowQueue
|
||
OCTET STRING
|
||
}
|
||
|
||
hwTunnelTeVsiIndex OBJECT-TYPE
|
||
SYNTAX InterfaceIndex
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Uniquely identifies a set of tunnel instances
|
||
between a pair of ingress and egress LSRs.
|
||
Managers should obtain new values for row
|
||
creation in this table by reading mplsTunnelIndexNext.
|
||
When the MPLS signalling protocol is rsvp(2),this value
|
||
should be equal to the value signalled in the tunnel ID
|
||
of the session object. When the MPLS signalling protocol
|
||
is crldp(3) this value should be equal to the value
|
||
signalled in the LSP ID. Reference to MPLS-TE-STD-MIB."
|
||
::= { hwTunnelTeVsiEntry 1 }
|
||
|
||
hwTunnelTeVsiName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE (0..47))
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The name of VSI that the TE interface bind."
|
||
::= { hwTunnelTeVsiEntry 2 }
|
||
|
||
|
||
hwTunnelTeVsiCir OBJECT-TYPE
|
||
SYNTAX Integer32 (100..10000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Committed Information Rate of the VSI."
|
||
::= { hwTunnelTeVsiEntry 3}
|
||
|
||
|
||
hwTunnelTeVsiPir OBJECT-TYPE
|
||
SYNTAX Integer32 (100..10000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Peak Information Rate of the VSI."
|
||
::= { hwTunnelTeVsiEntry 4 }
|
||
|
||
|
||
hwTunnelTeVsiFlowQueue OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE (0..31))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Name of flow-queue template."
|
||
::= { hwTunnelTeVsiEntry 5 }
|
||
|
||
|
||
hwTunnelTeVllTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF HwTunnelTeVllEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The table describes the VLL binding of tunnel."
|
||
::= { hwTunnelTeMibObject 3 }
|
||
|
||
|
||
hwTunnelTeVllEntry OBJECT-TYPE
|
||
SYNTAX HwTunnelTeVllEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The VLL binding configuration of tunnel interface."
|
||
INDEX { hwTunnelTeVllIndex,hwTunnelTeVllInterfaceName }
|
||
::= {hwTunnelTeVllTable 1}
|
||
|
||
HwTunnelTeVllEntry ::=
|
||
SEQUENCE {
|
||
hwTunnelTeVllIndex
|
||
InterfaceIndex,
|
||
hwTunnelTeVllInterfaceName
|
||
OCTET STRING,
|
||
hwTunnelTeVllCir
|
||
Integer32,
|
||
hwTunnelTeVllPir
|
||
Integer32,
|
||
hwTunnelTeVllFlowQueue
|
||
OCTET STRING
|
||
}
|
||
|
||
hwTunnelTeVllIndex OBJECT-TYPE
|
||
SYNTAX InterfaceIndex
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Uniquely identifies a set of tunnel instances
|
||
between a pair of ingress and egress LSRs.
|
||
Managers should obtain new values for row
|
||
creation in this table by reading mplsTunnelIndexNext.
|
||
When the MPLS signalling protocol is rsvp(2),this value
|
||
should be equal to the value signalled in the tunnel ID
|
||
of the session object. When the MPLS signalling protocol
|
||
is crldp(3) this value should be equal to the value
|
||
signalled in the LSP ID. Reference to MPLS-TE-STD-MIB."
|
||
::= { hwTunnelTeVllEntry 1 }
|
||
|
||
hwTunnelTeVllInterfaceName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE (0..47))
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The interface name of VLL binding."
|
||
::= { hwTunnelTeVllEntry 2 }
|
||
|
||
|
||
hwTunnelTeVllCir OBJECT-TYPE
|
||
SYNTAX Integer32 (100..10000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Committed Information Rate of the VLL."
|
||
::= { hwTunnelTeVllEntry 3}
|
||
|
||
|
||
hwTunnelTeVllPir OBJECT-TYPE
|
||
SYNTAX Integer32 (100..10000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Peak Information Rate of the VLL."
|
||
::= { hwTunnelTeVllEntry 4 }
|
||
|
||
|
||
hwTunnelTeVllFlowQueue OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE (0..31))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Name of flow-queue template."
|
||
::= { hwTunnelTeVllEntry 5 }
|
||
|
||
hwTunnelTeL3vpnTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF HwTunnelTeL3vpnEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The table describes the L3VPN binding of tunnel."
|
||
::= { hwTunnelTeMibObject 4 }
|
||
|
||
|
||
hwTunnelTeL3vpnEntry OBJECT-TYPE
|
||
SYNTAX HwTunnelTeL3vpnEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The L3VPN binding configuration of tunnel interface."
|
||
INDEX { hwTunnelTeL3vpnIndex,hwTunnelTeL3vpnName }
|
||
::= {hwTunnelTeL3vpnTable 1}
|
||
|
||
HwTunnelTeL3vpnEntry ::=
|
||
SEQUENCE {
|
||
hwTunnelTeL3vpnIndex
|
||
InterfaceIndex,
|
||
hwTunnelTeL3vpnName
|
||
OCTET STRING,
|
||
hwTunnelTeL3vpnCir
|
||
Integer32,
|
||
hwTunnelTeL3vpnPir
|
||
Integer32,
|
||
hwTunnelTeL3vpnFlowQueue
|
||
OCTET STRING
|
||
}
|
||
|
||
hwTunnelTeL3vpnIndex OBJECT-TYPE
|
||
SYNTAX InterfaceIndex
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Uniquely identifies a set of tunnel instances
|
||
between a pair of ingress and egress LSRs.
|
||
Managers should obtain new values for row
|
||
creation in this table by reading mplsTunnelIndexNext.
|
||
When the MPLS signalling protocol is rsvp(2),this value
|
||
should be equal to the value signalled in the tunnel ID
|
||
of the session object. When the MPLS signalling protocol
|
||
is crldp(3) this value should be equal to the value
|
||
signalled in the LSP ID. Reference to MPLS-TE-STD-MIB."
|
||
::= { hwTunnelTeL3vpnEntry 1 }
|
||
|
||
|
||
hwTunnelTeL3vpnName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE (0..47))
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The name of VPN instance that the TE interface bind."
|
||
::= { hwTunnelTeL3vpnEntry 2 }
|
||
|
||
|
||
hwTunnelTeL3vpnCir OBJECT-TYPE
|
||
SYNTAX Integer32 (100..10000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Committed Information Rate of the L3VPN."
|
||
::= { hwTunnelTeL3vpnEntry 3}
|
||
|
||
|
||
hwTunnelTeL3vpnPir OBJECT-TYPE
|
||
SYNTAX Integer32 (100..10000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Peak Information Rate of the L3VPN."
|
||
::= { hwTunnelTeL3vpnEntry 4 }
|
||
|
||
|
||
hwTunnelTeL3vpnFlowQueue OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE (0..31))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Name of flow-queue template."
|
||
::= { hwTunnelTeL3vpnEntry 5 }
|
||
|
||
hwTunnelTeStatisticsTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF HwTunnelTeStatisticsEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The table describes the up/down state transition counts of the TE tunnel interface."
|
||
::= { hwTunnelTeMibObject 5 }
|
||
|
||
hwTunnelTeStatisticsEntry OBJECT-TYPE
|
||
SYNTAX HwTunnelTeStatisticsEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The up/down state transition counts of TE tunnel interface.
|
||
The index of the table is hwTunnelTeStatisticsIfIndex."
|
||
INDEX { hwTunnelTeStatisticsIfIndex}
|
||
::= {hwTunnelTeStatisticsTable 1}
|
||
|
||
HwTunnelTeStatisticsEntry ::=
|
||
SEQUENCE {
|
||
hwTunnelTeStatisticsIfIndex InterfaceIndex,
|
||
hwTunnelTeUpDownStatistics Unsigned32,
|
||
hwTunnTeCounterDiscontinuityTime TimeStamp
|
||
}
|
||
|
||
hwTunnelTeStatisticsIfIndex OBJECT-TYPE
|
||
SYNTAX InterfaceIndex
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Uniquely identifies a set of tunnel instances
|
||
between a pair of ingress and egress LSRs.
|
||
Managers should obtain new values for row
|
||
creation in this table by reading mplsTunnelIndexNext."
|
||
::= { hwTunnelTeStatisticsEntry 1 }
|
||
|
||
hwTunnelTeUpDownStatistics OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Describes the up/down transition counts of the TE tunnel interface."
|
||
::= { hwTunnelTeStatisticsEntry 2 }
|
||
|
||
hwTunnTeCounterDiscontinuityTime OBJECT-TYPE
|
||
SYNTAX TimeStamp
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The value of sysUpTime on the most recent occasion at which this interface's up/down transition counters suffered a discontinuity."
|
||
::= { hwTunnelTeStatisticsEntry 3 }
|
||
|
||
|
||
|
||
|
||
|
||
|
||
hwCtTemplateTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF HwCtTemplateEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The table describes the CT template configuration on the device."
|
||
::= { hwTunnelTeMibObject 6 }
|
||
|
||
hwCtTemplateEntry OBJECT-TYPE
|
||
SYNTAX HwCtTemplateEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT template configuration on the device.
|
||
The index of the table is hwCtTemplateIndex."
|
||
INDEX { hwCtTemplateIndex }
|
||
::= {hwCtTemplateTable 1}
|
||
|
||
HwCtTemplateEntry ::=
|
||
SEQUENCE {
|
||
hwCtTemplateIndex Integer32,
|
||
hwCtTemplateName OCTET STRING,
|
||
hwCtTemplateCt0 Unsigned32,
|
||
hwCtTemplateCt1 Unsigned32,
|
||
hwCtTemplateCt2 Unsigned32,
|
||
hwCtTemplateCt3 Unsigned32,
|
||
hwCtTemplateCt4 Unsigned32,
|
||
hwCtTemplateCt5 Unsigned32,
|
||
hwCtTemplateCt6 Unsigned32,
|
||
hwCtTemplateCt7 Unsigned32,
|
||
hwCtTemplateCommit INTEGER,
|
||
hwCtTemplateRowStatus RowStatus
|
||
}
|
||
|
||
hwCtTemplateIndex OBJECT-TYPE
|
||
SYNTAX Integer32 (1..4096)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It uniquely identifies a set of CT templates.
|
||
Managers should obtain new values for row
|
||
creation in this table by reading hwCtTemplateIndex."
|
||
::= { hwCtTemplateEntry 1 }
|
||
|
||
hwCtTemplateName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE (1..19))
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT template name."
|
||
::= { hwCtTemplateEntry 2 }
|
||
|
||
hwCtTemplateCt0 OBJECT-TYPE
|
||
SYNTAX Unsigned32
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT0 bandwidth of the CT template."
|
||
::= { hwCtTemplateEntry 3 }
|
||
|
||
hwCtTemplateCt1 OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..32000000)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT1 bandwidth of the CT template."
|
||
::= { hwCtTemplateEntry 4 }
|
||
|
||
hwCtTemplateCt2 OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..32000000)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT2 bandwidth of the CT template."
|
||
::= { hwCtTemplateEntry 5 }
|
||
|
||
hwCtTemplateCt3 OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..32000000)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT3 bandwidth of the CT template."
|
||
::= { hwCtTemplateEntry 6 }
|
||
|
||
hwCtTemplateCt4 OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..32000000)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT4 bandwidth of the CT template."
|
||
::= { hwCtTemplateEntry 7 }
|
||
|
||
hwCtTemplateCt5 OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..32000000)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT5 bandwidth of the CT template."
|
||
::= { hwCtTemplateEntry 8 }
|
||
|
||
hwCtTemplateCt6 OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..32000000)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT6 bandwidth of the CT template."
|
||
::= { hwCtTemplateEntry 9 }
|
||
|
||
hwCtTemplateCt7 OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..32000000)
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT7 bandwidth of the CT template."
|
||
::= { hwCtTemplateEntry 10 }
|
||
|
||
hwCtTemplateCommit OBJECT-TYPE
|
||
SYNTAX INTEGER{
|
||
notCommit(1),
|
||
commit(2)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The commit flag of the CT template,1 indicates commit,0 indicates not commit."
|
||
::= { hwCtTemplateEntry 11 }
|
||
|
||
hwCtTemplateRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This object is used to create and delete rows in the CT template."
|
||
::= { hwCtTemplateEntry 12 }
|
||
|
||
|
||
----------------------
|
||
|
||
|
||
|
||
|
||
hwCtConfigTunnelCtTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF HwCtConfigTunnelCtEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The table describes the CT configuration in the TE tunnel interface."
|
||
::= { hwTunnelTeMibObject 7 }
|
||
|
||
hwCtConfigTunnelCtEntry OBJECT-TYPE
|
||
SYNTAX HwCtConfigTunnelCtEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The table describes the CT configuration in the TE tunnel interface.
|
||
The index of the table is hwCtConfigTunnelCtIfIndex."
|
||
INDEX { hwCtConfigTunnelCtIfIndex}
|
||
::= {hwCtConfigTunnelCtTable 1}
|
||
|
||
HwCtConfigTunnelCtEntry ::=
|
||
SEQUENCE {
|
||
hwCtConfigTunnelCtIfIndex InterfaceIndex,
|
||
hwCtConfigTunnelName OCTET STRING,
|
||
hwCtConfigTunnelCommit INTEGER,
|
||
hwCtConfigTemplateName OCTET STRING,
|
||
hwCtConfigTunnelCt0Band Unsigned32,
|
||
hwCtConfigTunnelCt1Band Unsigned32,
|
||
hwCtConfigTunnelCt2Band Unsigned32,
|
||
hwCtConfigTunnelCt3Band Unsigned32,
|
||
hwCtConfigTunnelCt4Band Unsigned32,
|
||
hwCtConfigTunnelCt5Band Unsigned32,
|
||
hwCtConfigTunnelCt6Band Unsigned32,
|
||
hwCtConfigTunnelCt7Band Unsigned32
|
||
}
|
||
|
||
hwCtConfigTunnelCtIfIndex OBJECT-TYPE
|
||
SYNTAX InterfaceIndex
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Uniquely identifies a set of tunnels
|
||
between a pair of ingress and egress LSRs.
|
||
Managers should obtain new values for row
|
||
creation in this table by reading mplsTunnelIndexNext.
|
||
When the MPLS signalling protocol is rsvp(2),this value
|
||
should be equal to the value signalled in the tunnel ID
|
||
of the session object. When the MPLS signalling protocol
|
||
is crldp(3) this value should be equal to the value
|
||
signalled in the LSP ID. Reference to MPLS-TE-STD-MIB."
|
||
::= { hwCtConfigTunnelCtEntry 1 }
|
||
|
||
hwCtConfigTunnelName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE (0..64))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The name of the TE tunnel interface."
|
||
::= { hwCtConfigTunnelCtEntry 2 }
|
||
|
||
hwCtConfigTunnelCommit OBJECT-TYPE
|
||
SYNTAX INTEGER{
|
||
notCommit(1),
|
||
commit(2)
|
||
}
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The commit flag of the TE tunnel interface,1 indicates commit,0 indicates not commit."
|
||
::= { hwCtConfigTunnelCtEntry 3 }
|
||
|
||
|
||
hwCtConfigTemplateName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE (1..19))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT template name."
|
||
::= { hwCtConfigTunnelCtEntry 4 }
|
||
|
||
|
||
hwCtConfigTunnelCt0Band OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..32000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT0 bandwidth value of the TE tunnel interface."
|
||
::= { hwCtConfigTunnelCtEntry 5 }
|
||
|
||
hwCtConfigTunnelCt1Band OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..32000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT1 bandwidth value of the TE tunnel interface."
|
||
::= { hwCtConfigTunnelCtEntry 6 }
|
||
|
||
hwCtConfigTunnelCt2Band OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..32000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT2 bandwidth value of the TE tunnel interface."
|
||
::= { hwCtConfigTunnelCtEntry 7 }
|
||
|
||
hwCtConfigTunnelCt3Band OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..32000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT3 bandwidth value of the TE tunnel interface."
|
||
::= { hwCtConfigTunnelCtEntry 8 }
|
||
|
||
hwCtConfigTunnelCt4Band OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..32000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT4 bandwidth value of the TE tunnel interface."
|
||
::= { hwCtConfigTunnelCtEntry 9 }
|
||
|
||
hwCtConfigTunnelCt5Band OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..32000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT5 bandwidth value of the TE tunnel interface."
|
||
::= { hwCtConfigTunnelCtEntry 10 }
|
||
|
||
hwCtConfigTunnelCt6Band OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..32000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT6 bandwidth value of the TE tunnel interface."
|
||
::= { hwCtConfigTunnelCtEntry 11 }
|
||
|
||
hwCtConfigTunnelCt7Band OBJECT-TYPE
|
||
SYNTAX Unsigned32 (0..32000000)
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT7 bandwidth value of the TE tunnel interface."
|
||
::= { hwCtConfigTunnelCtEntry 12 }
|
||
|
||
|
||
|
||
--------------
|
||
|
||
|
||
|
||
hwCtStatisticsTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF HwCtStatisticsEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The table describes flow statistics of the TE tunnel interface VPN configuration."
|
||
::= { hwTunnelTeMibObject 8 }
|
||
|
||
hwCtStatisticsEntry OBJECT-TYPE
|
||
SYNTAX HwCtStatisticsEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The table describes the statistics in the TE tunnel interface with CT configuration.
|
||
The index of the table is hwCtStatisticsIfIndex."
|
||
INDEX { hwCtStatisticsIfIndex }
|
||
::= {hwCtStatisticsTable 1}
|
||
|
||
HwCtStatisticsEntry ::=
|
||
SEQUENCE {
|
||
hwCtStatisticsIfIndex InterfaceIndex,
|
||
hwCtStatisticsTunnelName OCTET STRING,
|
||
hwCtStatisticsCt0OutByteRate Counter64,
|
||
hwCtStatisticsCt0OutPktRate Counter64,
|
||
hwCtStatisticsCt0OutPkt Counter64,
|
||
hwCtStatisticsCt0OutPktByte Counter64,
|
||
hwCtStatisticsCt0OutErrorPkt Counter64,
|
||
hwCtStatisticsCt1OutByteRate Counter64,
|
||
hwCtStatisticsCt1OutPktRate Counter64,
|
||
hwCtStatisticsCt1OutPkt Counter64,
|
||
hwCtStatisticsCt1OutPktByte Counter64,
|
||
hwCtStatisticsCt1OutErrorPkt Counter64,
|
||
hwCtStatisticsCt2OutByteRate Counter64,
|
||
hwCtStatisticsCt2OutPktRate Counter64,
|
||
hwCtStatisticsCt2OutPkt Counter64,
|
||
hwCtStatisticsCt2OutPktByte Counter64,
|
||
hwCtStatisticsCt2OutErrorPkt Counter64,
|
||
hwCtStatisticsCt3OutByteRate Counter64,
|
||
hwCtStatisticsCt3OutPktRate Counter64,
|
||
hwCtStatisticsCt3OutPkt Counter64,
|
||
hwCtStatisticsCt3OutPktByte Counter64,
|
||
hwCtStatisticsCt3OutErrorPkt Counter64,
|
||
hwCtStatisticsCt4OutByteRate Counter64,
|
||
hwCtStatisticsCt4OutPktRate Counter64,
|
||
hwCtStatisticsCt4OutPkt Counter64,
|
||
hwCtStatisticsCt4OutPktByte Counter64,
|
||
hwCtStatisticsCt4OutErrorPkt Counter64,
|
||
hwCtStatisticsCt5OutByteRate Counter64,
|
||
hwCtStatisticsCt5OutPktRate Counter64,
|
||
hwCtStatisticsCt5OutPkt Counter64,
|
||
hwCtStatisticsCt5OutPktByte Counter64,
|
||
hwCtStatisticsCt5OutErrorPkt Counter64,
|
||
hwCtStatisticsCt6OutByteRate Counter64,
|
||
hwCtStatisticsCt6OutPktRate Counter64,
|
||
hwCtStatisticsCt6OutPkt Counter64,
|
||
hwCtStatisticsCt6OutPktByte Counter64,
|
||
hwCtStatisticsCt6OutErrorPkt Counter64,
|
||
hwCtStatisticsCt7OutByteRate Counter64,
|
||
hwCtStatisticsCt7OutPktRate Counter64,
|
||
hwCtStatisticsCt7OutPkt Counter64,
|
||
hwCtStatisticsCt7OutPktByte Counter64,
|
||
hwCtStatisticsCt7OutErrorPkt Counter64
|
||
}
|
||
|
||
hwCtStatisticsIfIndex OBJECT-TYPE
|
||
SYNTAX InterfaceIndex
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Uniquely identifies a set of tunnels
|
||
between a pair of ingress and egress LSRs.
|
||
Managers should obtain new values for row
|
||
creation in this table by reading mplsTunnelIndexNext.
|
||
When the MPLS signalling protocol is rsvp(2),this value
|
||
should be equal to the value signalled in the tunnel ID
|
||
of the session object. When the MPLS signalling protocol
|
||
is crldp(3) this value should be equal to the value
|
||
signalled in the LSP ID. Reference to MPLS-TE-STD-MIB."
|
||
::= { hwCtStatisticsEntry 1 }
|
||
|
||
hwCtStatisticsTunnelName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE (0..64))
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The name of the TE tunnel interface."
|
||
::= { hwCtStatisticsEntry 2 }
|
||
|
||
hwCtStatisticsCt0OutByteRate OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the rate in bytes/sec out from the CT0 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 3 }
|
||
|
||
|
||
|
||
hwCtStatisticsCt0OutPktRate OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 4 }
|
||
|
||
hwCtStatisticsCt0OutPkt OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the out packets from the CT0 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 5 }
|
||
|
||
hwCtStatisticsCt0OutPktByte OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the out bytes from the CT0 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 6 }
|
||
|
||
hwCtStatisticsCt0OutErrorPkt OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the error packets from the CT0 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 7 }
|
||
|
||
hwCtStatisticsCt1OutByteRate OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the rate in bytes/sec out from CT1 the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 8 }
|
||
|
||
hwCtStatisticsCt1OutPktRate OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 9 }
|
||
|
||
|
||
|
||
hwCtStatisticsCt1OutPkt OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the out packets from the CT1 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 10 }
|
||
hwCtStatisticsCt1OutPktByte OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the out packet bytes from the CT1 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 11 }
|
||
|
||
hwCtStatisticsCt1OutErrorPkt OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the error packets from the CT1 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 12 }
|
||
|
||
|
||
hwCtStatisticsCt2OutByteRate OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the rate in bytes/sec out from the CT2 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 13 }
|
||
|
||
hwCtStatisticsCt2OutPktRate OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the rate in packets/sec out from the CT2 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 14 }
|
||
|
||
|
||
|
||
hwCtStatisticsCt2OutPkt OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the out packets from the CT2 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 15 }
|
||
hwCtStatisticsCt2OutPktByte OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the out packet bytes from the CT2 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 16 }
|
||
|
||
hwCtStatisticsCt2OutErrorPkt OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the error packets from the CT2 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 17 }
|
||
|
||
|
||
hwCtStatisticsCt3OutByteRate OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT3 out in bytes/sec out of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 18 }
|
||
|
||
hwCtStatisticsCt3OutPktRate OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 19 }
|
||
|
||
|
||
|
||
|
||
hwCtStatisticsCt3OutPkt OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the out packets from the CT3 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 20 }
|
||
hwCtStatisticsCt3OutPktByte OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the out packet bytes from the CT3 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 21 }
|
||
|
||
hwCtStatisticsCt3OutErrorPkt OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the error packets from the CT0 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 22 }
|
||
|
||
|
||
hwCtStatisticsCt4OutByteRate OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT4 out in bytes/sec out of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 23 }
|
||
|
||
|
||
hwCtStatisticsCt4OutPktRate OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the rate in packets/sec out from the CT4 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 24 }
|
||
|
||
|
||
hwCtStatisticsCt4OutPkt OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the out packets from the CT4 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 25 }
|
||
|
||
hwCtStatisticsCt4OutPktByte OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the out packet bytes from the CT4 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 26 }
|
||
|
||
hwCtStatisticsCt4OutErrorPkt OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the error packets from the CT4 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 27 }
|
||
|
||
|
||
hwCtStatisticsCt5OutByteRate OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT5 out in bytes/sec out of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 28 }
|
||
|
||
|
||
hwCtStatisticsCt5OutPktRate OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the rate in packets/sec out from the CT5 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 29 }
|
||
|
||
|
||
hwCtStatisticsCt5OutPkt OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the out packets from the CT5 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 30 }
|
||
hwCtStatisticsCt5OutPktByte OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the out packet bytes from the CT5 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 31 }
|
||
|
||
hwCtStatisticsCt5OutErrorPkt OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the error packets from the CT5 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 32 }
|
||
|
||
|
||
hwCtStatisticsCt6OutByteRate OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT6 out in bytes/sec out of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 33 }
|
||
|
||
|
||
hwCtStatisticsCt6OutPktRate OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the rate in packets/sec out from the CT6 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 34 }
|
||
|
||
|
||
hwCtStatisticsCt6OutPkt OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the out packets from the CT6 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 35 }
|
||
hwCtStatisticsCt6OutPktByte OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the out packet bytes from the CT6 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 36 }
|
||
|
||
hwCtStatisticsCt6OutErrorPkt OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the error packets from the CT6 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 37 }
|
||
|
||
|
||
hwCtStatisticsCt7OutByteRate OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The CT7 out in bytes/sec out of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 38 }
|
||
|
||
|
||
hwCtStatisticsCt7OutPktRate OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the rate in packets/sec out from the CT7 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 39 }
|
||
|
||
|
||
hwCtStatisticsCt7OutPkt OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the out packets from the CT7 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 40 }
|
||
hwCtStatisticsCt7OutPktByte OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the out packet bytes from the CT7 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 41 }
|
||
|
||
hwCtStatisticsCt7OutErrorPkt OBJECT-TYPE
|
||
SYNTAX Counter64
|
||
MAX-ACCESS read-only
|
||
STATUS current
|
||
DESCRIPTION
|
||
"It counts the error packets from the CT7 of the TE tunnel interface with VPN configuration."
|
||
::= { hwCtStatisticsEntry 42 }
|
||
|
||
|
||
|
||
|
||
|
||
-- Node definitions
|
||
--
|
||
|
||
|
||
|
||
hwCtFlowTemplateTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF HwCtFlowTemplateEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The table describes max 8 of the CT-FLOW-Mapping template configuration on the device.
|
||
"
|
||
::= { hwTunnelTeMibObject 9}
|
||
|
||
hwCtFlowTemplateEntry OBJECT-TYPE
|
||
SYNTAX HwCtFlowTemplateEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The table describes the CT-FLOW-Mapping template configuration on the device.
|
||
"
|
||
INDEX { hwCtFlowTemplateID }
|
||
::= { hwCtFlowTemplateTable 1}
|
||
|
||
HwCtFlowTemplateEntry ::=
|
||
SEQUENCE
|
||
{
|
||
hwCtFlowTemplateID Integer32,
|
||
|
||
hwCtFlowTemplateName OCTET STRING,
|
||
|
||
hwCt0Cos INTEGER,
|
||
|
||
hwCt0Scheduler INTEGER,
|
||
|
||
hwCt0Valid INTEGER ,
|
||
|
||
hwCt1Cos INTEGER,
|
||
|
||
hwCt1Scheduler INTEGER,
|
||
|
||
hwCt1Valid INTEGER ,
|
||
|
||
hwCt2Cos INTEGER,
|
||
|
||
hwCt2Scheduler INTEGER,
|
||
|
||
hwCt2Valid INTEGER ,
|
||
|
||
hwCt3Cos INTEGER,
|
||
|
||
hwCt3Scheduler INTEGER,
|
||
|
||
hwCt3Valid INTEGER ,
|
||
|
||
hwCt4Cos INTEGER,
|
||
|
||
hwCt4Scheduler INTEGER,
|
||
|
||
hwCt4Valid INTEGER ,
|
||
|
||
hwCt5Cos INTEGER,
|
||
|
||
hwCt5Scheduler INTEGER,
|
||
|
||
hwCt5Valid INTEGER ,
|
||
|
||
hwCt6Cos INTEGER,
|
||
|
||
hwCt6Scheduler INTEGER,
|
||
|
||
hwCt6Valid INTEGER ,
|
||
|
||
hwCt7Cos INTEGER,
|
||
|
||
hwCt7Scheduler INTEGER,
|
||
|
||
hwCt7Valid INTEGER ,
|
||
|
||
hwCtFlowTemplateCommit INTEGER,
|
||
|
||
hwCtFlowTemplateRowStatus RowStatus
|
||
|
||
}
|
||
|
||
hwCtFlowTemplateID OBJECT-TYPE
|
||
SYNTAX Integer32 (1..8)
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The index of CT-FLOW templat."
|
||
::= {hwCtFlowTemplateEntry 1}
|
||
|
||
hwCtFlowTemplateName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE (1..60))
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The name of CT-FLOW template."
|
||
::= { hwCtFlowTemplateEntry 11 }
|
||
|
||
--CT0<54><30><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
hwCt0Cos OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
be(1),
|
||
af1(2),
|
||
af2(3),
|
||
af3(4),
|
||
af4(5),
|
||
ef(6),
|
||
cs6(7),
|
||
cs7(8)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'."
|
||
::= { hwCtFlowTemplateEntry 12 }
|
||
|
||
hwCt0Scheduler OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
pq(1),
|
||
wfq(2),
|
||
lpq(3)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Scheduler name."
|
||
::= { hwCtFlowTemplateEntry 13 }
|
||
|
||
hwCt0Valid OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
valid(1),
|
||
invalid(2)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The state of CT-FLOW templat row."
|
||
::= { hwCtFlowTemplateEntry 14 }
|
||
--CT0<54><30><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
--CT1<54><31><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
hwCt1Cos OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
be(1),
|
||
af1(2),
|
||
af2(3),
|
||
af3(4),
|
||
af4(5),
|
||
ef(6),
|
||
cs6(7),
|
||
cs7(8)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'."
|
||
::= { hwCtFlowTemplateEntry 15 }
|
||
|
||
hwCt1Scheduler OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
pq(1),
|
||
wfq(2),
|
||
lpq(3)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Scheduler name."
|
||
::= { hwCtFlowTemplateEntry 16 }
|
||
|
||
hwCt1Valid OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
valid(1),
|
||
invalid(2)
|
||
}
|
||
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The state of CT-FLOW templat row."
|
||
::= { hwCtFlowTemplateEntry 17 }
|
||
--CT1<54><31><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
--CT2<54><32><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
hwCt2Cos OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
be(1),
|
||
af1(2),
|
||
af2(3),
|
||
af3(4),
|
||
af4(5),
|
||
ef(6),
|
||
cs6(7),
|
||
cs7(8)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'."
|
||
::= { hwCtFlowTemplateEntry 18 }
|
||
|
||
hwCt2Scheduler OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
pq(1),
|
||
wfq(2),
|
||
lpq(3)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Scheduler name."
|
||
::= { hwCtFlowTemplateEntry 19 }
|
||
|
||
hwCt2Valid OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
valid(1),
|
||
invalid(2)
|
||
}
|
||
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The state of CT-FLOW templat row."
|
||
::= { hwCtFlowTemplateEntry 20 }
|
||
--CT2<54><32><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
--CT3<54><33><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
hwCt3Cos OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
be(1),
|
||
af1(2),
|
||
af2(3),
|
||
af3(4),
|
||
af4(5),
|
||
ef(6),
|
||
cs6(7),
|
||
cs7(8)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'."
|
||
::= { hwCtFlowTemplateEntry 21 }
|
||
|
||
hwCt3Scheduler OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
pq(1),
|
||
wfq(2),
|
||
lpq(3)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Scheduler name."
|
||
::= { hwCtFlowTemplateEntry 22 }
|
||
|
||
hwCt3Valid OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
valid(1),
|
||
invalid(2)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The state of CT-FLOW templat row."
|
||
::= { hwCtFlowTemplateEntry 23 }
|
||
--CT3<54><33><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
--CT4<54><34><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
hwCt4Cos OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
be(1),
|
||
af1(2),
|
||
af2(3),
|
||
af3(4),
|
||
af4(5),
|
||
ef(6),
|
||
cs6(7),
|
||
cs7(8)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'."
|
||
::= { hwCtFlowTemplateEntry 24 }
|
||
|
||
hwCt4Scheduler OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
pq(1),
|
||
wfq(2),
|
||
lpq(3)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Scheduler name."
|
||
::= { hwCtFlowTemplateEntry 25 }
|
||
|
||
hwCt4Valid OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
valid(1),
|
||
invalid(2)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The state of CT-FLOW templat row."
|
||
::= { hwCtFlowTemplateEntry 26 }
|
||
--CT4<54><34><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
--CT5<54><35><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
hwCt5Cos OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
be(1),
|
||
af1(2),
|
||
af2(3),
|
||
af3(4),
|
||
af4(5),
|
||
ef(6),
|
||
cs6(7),
|
||
cs7(8)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'."
|
||
::= { hwCtFlowTemplateEntry 27 }
|
||
|
||
hwCt5Scheduler OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
pq(1),
|
||
wfq(2),
|
||
lpq(3)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Scheduler name."
|
||
::= { hwCtFlowTemplateEntry 28 }
|
||
|
||
hwCt5Valid OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
valid(1),
|
||
invalid(2)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The state of CT-FLOW templat row."
|
||
::= { hwCtFlowTemplateEntry 29 }
|
||
--CT5<54><35><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
--CT6<54><36><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
hwCt6Cos OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
be(1),
|
||
af1(2),
|
||
af2(3),
|
||
af3(4),
|
||
af4(5),
|
||
ef(6),
|
||
cs6(7),
|
||
cs7(8)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'."
|
||
::= { hwCtFlowTemplateEntry 30 }
|
||
|
||
hwCt6Scheduler OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
pq(1),
|
||
wfq(2),
|
||
lpq(3)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Scheduler name."
|
||
::= { hwCtFlowTemplateEntry 31 }
|
||
|
||
hwCt6Valid OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
valid(1),
|
||
invalid(2)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The state of CT-FLOW templat row."
|
||
::= { hwCtFlowTemplateEntry 32 }
|
||
--CT6<54><36><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
--CT7<54><37><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
hwCt7Cos OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
be(1),
|
||
af1(2),
|
||
af2(3),
|
||
af3(4),
|
||
af4(5),
|
||
ef(6),
|
||
cs6(7),
|
||
cs7(8)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'."
|
||
::= { hwCtFlowTemplateEntry 33 }
|
||
|
||
hwCt7Scheduler OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
pq(1),
|
||
wfq(2),
|
||
lpq(3)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Scheduler name."
|
||
::= { hwCtFlowTemplateEntry 34 }
|
||
|
||
hwCt7Valid OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
valid(1),
|
||
invalid(2)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The state of CT-FLOW templat row."
|
||
::= { hwCtFlowTemplateEntry 35 }
|
||
--CT7<54><37><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
|
||
hwCtFlowTemplateCommit OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
commit(1),
|
||
nocommit(2)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The state of CT-FLOW templat commit."
|
||
::= { hwCtFlowTemplateEntry 36 }
|
||
|
||
hwCtFlowTemplateRowStatus OBJECT-TYPE
|
||
SYNTAX RowStatus
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The state of CT-FLOW templat."
|
||
::= { hwCtFlowTemplateEntry 51 }
|
||
|
||
|
||
|
||
hwDsteInterfaceCfgTable OBJECT-TYPE
|
||
SYNTAX SEQUENCE OF HwDsteInterfaceCfgEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The DS-TE configuration at interface."
|
||
::= { hwTunnelTeMibObject 10}
|
||
|
||
hwDsteInterfaceCfgEntry OBJECT-TYPE
|
||
SYNTAX HwDsteInterfaceCfgEntry
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The DS-TE configuration at interface."
|
||
INDEX { hwDsteIfIndex }
|
||
::= { hwDsteInterfaceCfgTable 1}
|
||
|
||
HwDsteInterfaceCfgEntry ::=
|
||
SEQUENCE
|
||
{
|
||
hwDsteIfIndex InterfaceIndex ,
|
||
|
||
hwAppliedCtFlowTemplateName OCTET STRING,
|
||
|
||
hwCtBandWidthShareCfg INTEGER
|
||
}
|
||
|
||
hwDsteIfIndex OBJECT-TYPE
|
||
SYNTAX InterfaceIndex
|
||
MAX-ACCESS not-accessible
|
||
STATUS current
|
||
DESCRIPTION
|
||
"A unique value, greater than zero, for eachinterface.
|
||
It is recommended that values are assigned contiguously starting from 1.
|
||
The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization."
|
||
::= {hwDsteInterfaceCfgEntry 1}
|
||
|
||
hwAppliedCtFlowTemplateName OBJECT-TYPE
|
||
SYNTAX OCTET STRING (SIZE (1..60))
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The name of CT-FLOW template."
|
||
::= { hwDsteInterfaceCfgEntry 11 }
|
||
|
||
hwCtBandWidthShareCfg OBJECT-TYPE
|
||
SYNTAX INTEGER {
|
||
share(1),
|
||
unshare(2)
|
||
}
|
||
MAX-ACCESS read-create
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The Value of Ct BandWidth configuration for DS-TE.
|
||
That must be in 'Share,UnShare'."
|
||
::= { hwDsteInterfaceCfgEntry 12 }
|
||
|
||
hwTunnelTeConformance OBJECT IDENTIFIER ::= { hwTunnelTeMib 3 }
|
||
|
||
hwTunnelTeGroups OBJECT IDENTIFIER ::= { hwTunnelTeConformance 3 }
|
||
|
||
hwTunnelTeCompliances OBJECT IDENTIFIER ::= {hwTunnelTeConformance 1}
|
||
|
||
|
||
hwTunnelDiffServGroup OBJECT-GROUP
|
||
OBJECTS { hwTunnelDiffServMode, hwTunnelDiffServServiceClass,hwTunnelDiffServColor,hwTunnelTeFlowQueue}
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Describes the different service mode of tunnel."
|
||
::= { hwTunnelTeGroups 1 }
|
||
|
||
hwTunnelTeVsiGroup OBJECT-GROUP
|
||
OBJECTS { hwTunnelTeVsiCir, hwTunnelTeVsiPir,hwTunnelTeVsiFlowQueue}
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Describes the VSI binding of tunnel."
|
||
::= { hwTunnelTeGroups 2 }
|
||
|
||
hwTunnelTeVllGroup OBJECT-GROUP
|
||
OBJECTS { hwTunnelTeVllCir, hwTunnelTeVllPir,hwTunnelTeVllFlowQueue}
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Describes the VLL binding of tunnel."
|
||
::= { hwTunnelTeGroups 3 }
|
||
|
||
hwTunnelTeL3vpnGroup OBJECT-GROUP
|
||
OBJECTS { hwTunnelTeL3vpnCir, hwTunnelTeL3vpnPir,hwTunnelTeL3vpnFlowQueue}
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Describes the L3VPN binding of tunnel."
|
||
::= { hwTunnelTeGroups 4 }
|
||
hwTunnelTeStatisticsGroup OBJECT-GROUP
|
||
OBJECTS { hwTunnelTeUpDownStatistics,hwTunnTeCounterDiscontinuityTime}
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Describes the up/down count of the TE tunnel."
|
||
::= { hwTunnelTeGroups 5 }
|
||
|
||
hwCtTemplateGroup OBJECT-GROUP
|
||
OBJECTS { hwCtTemplateName ,
|
||
hwCtTemplateCt0 ,
|
||
hwCtTemplateCt1 ,
|
||
hwCtTemplateCt2 ,
|
||
hwCtTemplateCt3 ,
|
||
hwCtTemplateCt4 ,
|
||
hwCtTemplateCt5 ,
|
||
hwCtTemplateCt6 ,
|
||
hwCtTemplateCt7,
|
||
hwCtTemplateCommit,
|
||
hwCtTemplateRowStatus
|
||
}
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Describes CT template."
|
||
::= { hwTunnelTeGroups 6 }
|
||
|
||
hwCtConfigCtGroup OBJECT-GROUP
|
||
OBJECTS {
|
||
hwCtConfigTunnelName ,
|
||
hwCtConfigTunnelCommit ,
|
||
hwCtConfigTemplateName ,
|
||
hwCtConfigTunnelCt0Band ,
|
||
hwCtConfigTunnelCt1Band ,
|
||
hwCtConfigTunnelCt2Band ,
|
||
hwCtConfigTunnelCt3Band ,
|
||
hwCtConfigTunnelCt4Band ,
|
||
hwCtConfigTunnelCt5Band ,
|
||
hwCtConfigTunnelCt6Band ,
|
||
hwCtConfigTunnelCt7Band}
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Describes the CT configuration of the TE tunnel interface."
|
||
::= { hwTunnelTeGroups 7 }
|
||
|
||
hwCtStatisticsGroup OBJECT-GROUP
|
||
OBJECTS {
|
||
hwCtStatisticsTunnelName ,
|
||
hwCtStatisticsCt0OutByteRate ,
|
||
hwCtStatisticsCt0OutPktRate ,
|
||
hwCtStatisticsCt0OutPkt ,
|
||
hwCtStatisticsCt0OutPktByte ,
|
||
hwCtStatisticsCt0OutErrorPkt ,
|
||
hwCtStatisticsCt1OutByteRate ,
|
||
hwCtStatisticsCt1OutPktRate ,
|
||
hwCtStatisticsCt1OutPkt ,
|
||
hwCtStatisticsCt1OutPktByte ,
|
||
hwCtStatisticsCt1OutErrorPkt ,
|
||
hwCtStatisticsCt2OutByteRate ,
|
||
hwCtStatisticsCt2OutPktRate ,
|
||
hwCtStatisticsCt2OutPkt ,
|
||
hwCtStatisticsCt2OutPktByte ,
|
||
hwCtStatisticsCt2OutErrorPkt ,
|
||
hwCtStatisticsCt3OutByteRate ,
|
||
hwCtStatisticsCt3OutPktRate ,
|
||
hwCtStatisticsCt3OutPkt ,
|
||
hwCtStatisticsCt3OutPktByte ,
|
||
hwCtStatisticsCt3OutErrorPkt ,
|
||
hwCtStatisticsCt4OutByteRate ,
|
||
hwCtStatisticsCt4OutPktRate ,
|
||
hwCtStatisticsCt4OutPkt ,
|
||
hwCtStatisticsCt4OutPktByte ,
|
||
hwCtStatisticsCt4OutErrorPkt ,
|
||
hwCtStatisticsCt5OutByteRate ,
|
||
hwCtStatisticsCt5OutPktRate ,
|
||
hwCtStatisticsCt5OutPkt ,
|
||
hwCtStatisticsCt5OutPktByte ,
|
||
hwCtStatisticsCt5OutErrorPkt ,
|
||
hwCtStatisticsCt6OutByteRate ,
|
||
hwCtStatisticsCt6OutPktRate ,
|
||
hwCtStatisticsCt6OutPkt ,
|
||
hwCtStatisticsCt6OutPktByte ,
|
||
hwCtStatisticsCt6OutErrorPkt ,
|
||
hwCtStatisticsCt7OutByteRate ,
|
||
hwCtStatisticsCt7OutPktRate ,
|
||
hwCtStatisticsCt7OutPkt ,
|
||
hwCtStatisticsCt7OutPktByte ,
|
||
hwCtStatisticsCt7OutErrorPkt
|
||
}
|
||
|
||
STATUS current
|
||
DESCRIPTION
|
||
"Describes the CT of the TE tunnel interface."
|
||
::= { hwTunnelTeGroups 8 }
|
||
|
||
hwCtFlowTemplateGroup OBJECT-GROUP
|
||
OBJECTS {
|
||
--hwCtFlowTemplateID ,
|
||
hwCtFlowTemplateName ,
|
||
hwCt0Cos ,
|
||
hwCt0Scheduler ,
|
||
hwCt0Valid ,
|
||
hwCt1Cos ,
|
||
hwCt1Scheduler ,
|
||
hwCt1Valid ,
|
||
hwCt2Cos ,
|
||
hwCt2Scheduler ,
|
||
hwCt2Valid ,
|
||
hwCt3Cos ,
|
||
hwCt3Scheduler ,
|
||
hwCt3Valid ,
|
||
hwCt4Cos ,
|
||
hwCt4Scheduler ,
|
||
hwCt4Valid ,
|
||
hwCt5Cos ,
|
||
hwCt5Scheduler ,
|
||
hwCt5Valid ,
|
||
hwCt6Cos ,
|
||
hwCt6Scheduler ,
|
||
hwCt6Valid ,
|
||
hwCt7Cos ,
|
||
hwCt7Scheduler ,
|
||
hwCt7Valid ,
|
||
hwCtFlowTemplateCommit ,
|
||
hwCtFlowTemplateRowStatus
|
||
}
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The table describes the CT-FLOW-Mapping template configuration on the device."
|
||
::= { hwTunnelTeGroups 10 }
|
||
|
||
hwDsteInterfaceCfgGroup OBJECT-GROUP
|
||
OBJECTS {
|
||
--hwDsteIfIndex ,
|
||
hwAppliedCtFlowTemplateName ,
|
||
hwCtBandWidthShareCfg
|
||
}
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The table describes the CT-FLOW-Mapping template configuration on the device."
|
||
::= { hwTunnelTeGroups 11 }
|
||
|
||
|
||
|
||
hwTunnelDsTeTrap OBJECT IDENTIFIER ::= { hwTunnelTeMib 2 }
|
||
|
||
|
||
hwMplsFqShortage NOTIFICATION-TYPE
|
||
OBJECTS { hwCtConfigTunnelName }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is generated when FQ (flow-queue) template resources are shortage."
|
||
::= { hwTunnelDsTeTrap 1 }
|
||
|
||
hwMplsSqShortage NOTIFICATION-TYPE
|
||
OBJECTS { hwCtConfigTunnelName }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is generated when SQ (subscriber-queue) resources are shortage."
|
||
::= { hwTunnelDsTeTrap 2 }
|
||
|
||
hwMplsSqBandwidthExceed NOTIFICATION-TYPE
|
||
OBJECTS { hwCtConfigTunnelName }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is generated when the total bandwidth of SQ (subscriber-queue) exceeds 10G bit/s in one LPU."
|
||
::= { hwTunnelDsTeTrap 3 }
|
||
|
||
hwMplsHsbFqShortage NOTIFICATION-TYPE
|
||
OBJECTS { hwCtConfigTunnelName }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is generated when FQ (flow-queue) template resources in HSB are shortage."
|
||
::= { hwTunnelDsTeTrap 4 }
|
||
|
||
hwMplsHsbSqShortage NOTIFICATION-TYPE
|
||
OBJECTS { hwCtConfigTunnelName }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is generated when SQ (subscriber-queue) resources in HSB are shortage."
|
||
::= { hwTunnelDsTeTrap 5 }
|
||
|
||
hwMplsHsbSqBandwidthExceed NOTIFICATION-TYPE
|
||
OBJECTS { hwCtConfigTunnelName }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"This notification is generated when the total bandwidth of SQ (subscriber-queue) in HSB exceeds 10G bit/s in one LPU."
|
||
::= { hwTunnelDsTeTrap 6 }
|
||
|
||
hwTunnelTeTrapGroup NOTIFICATION-GROUP
|
||
NOTIFICATIONS { hwMplsHsbSqBandwidthExceed, hwMplsHsbSqShortage, hwMplsHsbFqShortage, hwMplsSqBandwidthExceed, hwMplsSqShortage, hwMplsFqShortage }
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The HUAWEI Tunnel Te trap info."
|
||
::= { hwTunnelTeGroups 9 }
|
||
|
||
|
||
|
||
|
||
|
||
-- compliance statements
|
||
|
||
hwTunnelTeCompliance MODULE-COMPLIANCE
|
||
STATUS current
|
||
DESCRIPTION
|
||
"The compliance statement for HUAWEI-TUNNEL-TE-MIB."
|
||
MODULE -- this module
|
||
MANDATORY-GROUPS { hwTunnelDiffServGroup,
|
||
hwTunnelTeVsiGroup,
|
||
hwTunnelTeVllGroup,
|
||
hwTunnelTeL3vpnGroup,
|
||
hwTunnelTeStatisticsGroup,
|
||
hwCtTemplateGroup,
|
||
hwCtConfigCtGroup,
|
||
hwCtStatisticsGroup,
|
||
hwTunnelTeTrapGroup,
|
||
hwCtFlowTemplateGroup,
|
||
hwDsteInterfaceCfgGroup}
|
||
::= { hwTunnelTeCompliances 1 }
|
||
|
||
|
||
|
||
END
|
||
|
||
--
|
||
-- HUAWEI-TUNNEL-TE-MIB.mib
|
||
--
|