mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
librenms-librenms/mibs/huawei/HUAWEI-BFD
Adam Amstrong fea1d1ab80 add VRP. break some layout. 
git-svn-id: http://www.observium.org/svn/observer/trunk@2567 61d68cd4-352d-0410-923a-c4978735b2b8
2011-09-23 15:20:11 +00:00

1803 lines
62 KiB
Plaintext
Raw Blame History

-- =================================================================
-- Copyright (C) 2005 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: Huawei BFD MIB
-- Reference:
-- Version: V1.00
-- History:
-- =================================================================
HUAWEI-BFD-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwDatacomm
FROM HUAWEI-MIB
EnabledStatus
FROM P-BRIDGE-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
IpAddress, Integer32, Unsigned32, Counter32, OBJECT-TYPE,
MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
RowStatus, TEXTUAL-CONVENTION
FROM SNMPv2-TC;
-- December 27, 2006 at 00:00 GMT
hwBFDMIB MODULE-IDENTITY
LAST-UPDATED "200612270000Z" -- December 27, 2006 at 00:00 GMT
ORGANIZATION
"Organization."
CONTACT-INFO
"Contact-info."
DESCRIPTION
"Description."
::= { hwDatacomm 38 }
--
-- Textual conventions
--
BfdInterval ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Description."
SYNTAX Integer32
BfdDiag ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Description."
SYNTAX Integer32
--
-- Node definitions
--
hwBfdScalarsObjects OBJECT IDENTIFIER ::= { hwBFDMIB 1 }
hwBfdVersionNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current version number of the BFD protocol is 1."
DEFVAL { 1 }
::= { hwBfdScalarsObjects 1 }
hwBfdAdminStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Describe the administrative status of a BFD protocol.
The value 'enabled' denotes that the BFD Process is active on all interface;
The value 'disabled' denotes that the BFD process is disabled on all interfaces."
DEFVAL { 2 }
::= { hwBfdScalarsObjects 2 }
hwBfdSessLimitNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Define the maximum number of BFD sessions allowed in the logic router."
DEFVAL { 0 }
::= { hwBfdScalarsObjects 3 }
hwBfdSessInterfaceLimitNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Define the maximum number of BFD sessions allowed per board."
DEFVAL { 0 }
::= { hwBfdScalarsObjects 4 }
hwBfdSessStaticNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BFD static sessions."
::= { hwBfdScalarsObjects 5 }
hwBfdSessDynamicNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BFD dynamic sessions."
::= { hwBfdScalarsObjects 6 }
hwBfdSessGlobalDefaultIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Define the default multicast IP address used in BFD multicast detection."
::= { hwBfdScalarsObjects 7 }
hwBfdEchoPassiveStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The passive Echo function of BFD."
DEFVAL { 2 }
::= { hwBfdScalarsObjects 8 }
hwBfdEchoAclNum OBJECT-TYPE
SYNTAX Unsigned32 (0 | 2000..2999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Acl Number for passive Echo function of BFD."
::= { hwBfdScalarsObjects 9 }
hwBfdSessDynamicPingInterval OBJECT-TYPE
SYNTAX Unsigned32 (30..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Define the sending interval of the MPLS echo packet.
The unit is second."
DEFVAL { 60 }
::= { hwBfdScalarsObjects 10 }
hwBfdSessDynamicSupportPassive OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The capability of automatically creating BFD sessions on the LSP egress
'enable'denotes that the egress can create BFD sessions;
'disabled'denotes that the egress can not create BFD sessions."
DEFVAL {2}
::= { hwBfdScalarsObjects 11 }
hwBfdSessDelayUpTime OBJECT-TYPE
SYNTAX Unsigned32 (0..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Define delay interval before the session turns to up.
The unit is second."
DEFVAL { 0 }
::= { hwBfdScalarsObjects 12 }
hwBfdSessMultiDstPort OBJECT-TYPE
SYNTAX Integer32 (0|3784|4784)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination UDP port of multi-hop BFD session. When the
administrative status of BFD protocol is disabled, this value
will be 0."
::= { hwBfdScalarsObjects 13 }
hwBfdTrapSendInterval OBJECT-TYPE
SYNTAX Integer32 (1..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Define the sending interval of TRAP message.
The unit is seconds."
DEFVAL { 120 }
::= { hwBfdScalarsObjects 14 }
hwBfdObjects OBJECT IDENTIFIER ::= { hwBFDMIB 2 }
hwBfdIfConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBfdIfConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface configuration table of BFD entries."
::= { hwBfdObjects 1 }
hwBfdIfConfEntry OBJECT-TYPE
SYNTAX HwBfdIfConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BFD Interface Entry describes BFD Interface."
INDEX { hwBfdIfConfIndex }
::= { hwBfdIfConfTable 1 }
HwBfdIfConfEntry ::=
SEQUENCE {
hwBfdIfConfIndex
INTEGER,
hwBfdIfConfName
OCTET STRING,
hwBfdIfConfEnable
Integer32,
hwBfdIfConfDeleting
Integer32,
hwBfdIfConfAvailable
Integer32,
hwBfdIfConfSessCnt
Integer32,
hwBfdIfConfRowStatus
RowStatus
}
hwBfdIfConfIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is the Configuration's Index of this interface."
::= { hwBfdIfConfEntry 1 }
hwBfdIfConfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..47))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is the name of this Interface."
::= { hwBfdIfConfEntry 2 }
hwBfdIfConfEnable OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The flag that whether the interface has enabled BFD."
::= { hwBfdIfConfEntry 3 }
hwBfdIfConfDeleting OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flag that whether the interface is in deleting.
0:The interface is not deleted.
1:The interface is deleted"
::= { hwBfdIfConfEntry 4 }
hwBfdIfConfAvailable OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flag that whether the interface is available.
0:The interface is not available.
1:The interface is available."
::= { hwBfdIfConfEntry 5 }
hwBfdIfConfSessCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sessions that has been bound to this interface."
::= { hwBfdIfConfEntry 6 }
hwBfdIfConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"used to manage the creation and deletion of conceptual rows."
::= { hwBfdIfConfEntry 7 }
hwBfdSessionConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBfdSessionConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BFD Session Configuration Table describes the BFD sessions."
::= { hwBfdObjects 2 }
hwBfdSessionConfEntry OBJECT-TYPE
SYNTAX HwBfdSessionConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BFD Session Configuration Entry describes BFD session."
INDEX { hwBfdSessConfName }
::= { hwBfdSessionConfTable 1 }
HwBfdSessionConfEntry ::=
SEQUENCE {
hwBfdSessConfName
OCTET STRING,
hwBfdSessConfMIndex
Unsigned32,
hwBfdSessConfLocalDiscr
Unsigned32,
hwBfdSessConfRemoteDiscr
Unsigned32,
hwBfdSessConfPeerAddr
IpAddress,
hwBfdSessConfBindIfIndex
Unsigned32,
hwBfdSessConfBindIfName
OCTET STRING,
hwBfdSessConfDemandEnable
INTEGER,
hwBfdSessConfDemandTimerInterval
Unsigned32,
hwBfdSessConfDetectMult
Unsigned32,
hwBfdSessConfDesiredMinRxInterval
BfdInterval,
hwBfdSessConfDesiredMinTxInterval
BfdInterval,
hwBfdSessConfWTRInterval
INTEGER,
hwBfdSessConfTOS
INTEGER,
hwBfdSessConfPSTFlag
INTEGER,
hwBfdSessConfCommitFlag
INTEGER,
hwBfdSessConfAdminStatus
INTEGER,
hwBfdSessConfRowStatus
RowStatus,
hwBfdSessConfSourceAddr
IpAddress,
hwBfdSessConfVrfIndex
Unsigned32,
hwBfdSessConfVPNName
OCTET STRING,
hwBfdSessConfDefaultIp
INTEGER,
hwBfdSessConfPISFlag
INTEGER,
hwBfdSessConfBindType
INTEGER,
hwBfdSessConfNextHop
IpAddress,
hwBfdSessConfStaticLspName
OCTET STRING,
hwBfdSessConfPWSecondaryFlag
INTEGER,
hwBfdSessConfTunnelDetectType
INTEGER,
hwBfdSessConfVcId
Unsigned32,
hwBfdSessConfVsiName
OCTET STRING,
hwBfdSessConfVsiPeerAddr
IpAddress,
hwBfdSessConfDiscrAuto
EnabledStatus
}
hwBfdSessConfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..15))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is the name of this Configuration model."
::= { hwBfdSessionConfEntry 1 }
hwBfdSessConfMIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the Configuration's Index of this session."
::= { hwBfdSessionConfEntry 2 }
hwBfdSessConfLocalDiscr OBJECT-TYPE
SYNTAX Unsigned32 (1..16384)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Define the local discriminator of the BFD session."
::= { hwBfdSessionConfEntry 3 }
hwBfdSessConfRemoteDiscr OBJECT-TYPE
SYNTAX Unsigned32 (1..16384)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Define the remote discriminator of the BFD session."
::= { hwBfdSessionConfEntry 4 }
hwBfdSessConfPeerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Define the IP address of the peer in the BFD session."
::= { hwBfdSessionConfEntry 5 }
hwBfdSessConfBindIfIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the index of the binding interface in the BFD configuration."
::= { hwBfdSessionConfEntry 6 }
hwBfdSessConfBindIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..47))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is the name of the binding interface in the BFD configuration."
::= { hwBfdSessionConfEntry 7 }
hwBfdSessConfDemandEnable OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is the flag of the BFD demand mode.
0:Disable the BFD demand mode.
1:Enable the BFD demand mode."
DEFVAL { 0 }
::= { hwBfdSessionConfEntry 8 }
hwBfdSessConfDemandTimerInterval OBJECT-TYPE
SYNTAX Unsigned32 (0 | 500..300000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Define the detecting interval in the BFD session with the demand mode.
The unit is millisecond."
::= { hwBfdSessionConfEntry 9 }
hwBfdSessConfDetectMult OBJECT-TYPE
SYNTAX Unsigned32 (3..50)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is Detect time multiplier of the configuration. The
negotiated transmit interval, multiplied by this value,
provides the detection time for the transmitting
system in Asynchronous mode."
::= { hwBfdSessionConfEntry 10 }
hwBfdSessConfDesiredMinRxInterval OBJECT-TYPE
SYNTAX BfdInterval (3..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the minimum interval of the configuration,in
milliseconds, between received BFD Control packets
that this system is capable of supporting."
::= { hwBfdSessionConfEntry 11 }
hwBfdSessConfDesiredMinTxInterval OBJECT-TYPE
SYNTAX BfdInterval (3..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the minimum interval of the configuration,
in milliseconds, that the local system would
like to use when transmitting BFD Control packets."
::= { hwBfdSessionConfEntry 12 }
hwBfdSessConfWTRInterval OBJECT-TYPE
SYNTAX INTEGER (0..60)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the WTR interval of bfd session.
The unit is minute."
::= { hwBfdSessionConfEntry 13 }
hwBfdSessConfTOS OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the TOS value of bfd packet."
DEFVAL { 7 }
::= { hwBfdSessionConfEntry 14 }
hwBfdSessConfPSTFlag OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The PST flag of the BFD session configuration."
DEFVAL { 0 }
::= { hwBfdSessionConfEntry 15 }
hwBfdSessConfCommitFlag OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is the commit flag of the configuration entry.
0: not commit
1: commit "
::= { hwBfdSessionConfEntry 16 }
hwBfdSessConfAdminStatus OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"There may be circumstances where it is desirable to
administratively enable or disable a BFD session of
the configuration. The AdminStatus exists so that
a session can be administratively put down indefinitely."
::= { hwBfdSessionConfEntry 17 }
hwBfdSessConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"used to manage the creation and deletion of conceptual rows."
::= { hwBfdSessionConfEntry 18 }
hwBfdSessConfSourceAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Define the source IP address of the BFD session."
::= { hwBfdSessionConfEntry 19 }
hwBfdSessConfVrfIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the VPN interface."
::= { hwBfdSessionConfEntry 20 }
hwBfdSessConfVPNName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of VPN interface."
::= { hwBfdSessionConfEntry 21 }
hwBfdSessConfDefaultIp OBJECT-TYPE
SYNTAX INTEGER
{
no(1),
yes(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"BFD session use default multicast IP as the detect peer-ip
1 : do not use the default multicast IP
2 : use the default multicast IP
default value is 1 (do not use)"
DEFVAL { 1 }
::= { hwBfdSessionConfEntry 22 }
hwBfdSessConfPISFlag OBJECT-TYPE
SYNTAX INTEGER
{
false(1),
true(2),
subif(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The state of BFD session is associated with the state of the binding interface
1 : do not associate with interface state
2 : associate with interface state
3 : associate with interface and correlative sub interface .
default value is 1 (do not associate)"
DEFVAL { 1 }
::= { hwBfdSessionConfEntry 23 }
hwBfdSessConfBindType OBJECT-TYPE
SYNTAX INTEGER
{
interfaceIp(1),
peerIp(2),
sourceIp(3),
ifAndSourceIp(4),
fec(5),
tunnelIf(6),
ospf(7),
isis(8),
ldpLsp(9),
staticLsp(10),
teLsp(11),
teTunnel(12),
pw(13),
vsiPw (15)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The binding type of the BFD session:
1: BFD for IP with peer-ip and interface;
2: BFD for IP only with peer-ip;
3: BFD for IP with peer-ip and source-ip;
4: BFD for IP with peer-ip, interface and source-ip;
5: BFD for FEC(NOT support now);
6: BFD for Tunnel interface(NOT support now);
7: BFD for OSPF;
8: BFD for ISIS;
9: BFD for LDP-LSP;
10: BFD for static LSP;
11: BFD for TE-LSP;
12: BFD for TE-Tunnel;
13: BFD for PW;
15: BFD for VSI PW;"
::= { hwBfdSessionConfEntry 24 }
hwBfdSessConfNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is the next hop of the BFD session."
::= { hwBfdSessionConfEntry 25 }
hwBfdSessConfStaticLspName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is the static LSP name of the BFD session."
::= { hwBfdSessionConfEntry 26 }
hwBfdSessConfPWSecondaryFlag OBJECT-TYPE
SYNTAX INTEGER
{
flagMasterPW(1),
flagSecondaryPW(2),
flagNoPW(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The role of the PW bound with BFD session:
1: master PW;
2: secondary PW;
3: no PW"
DEFVAL { 1 }
::= { hwBfdSessionConfEntry 27 }
hwBfdSessConfTunnelDetectType OBJECT-TYPE
SYNTAX INTEGER
{
flagBothDown(1),
flagNeighborDown(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set the failure notifies policy type:
1: Notify applications when detecting both Detect-Down and Neighbor-Down;
2: Notify applications only when detecting Neighbor-Down;"
DEFVAL { 1 }
::= { hwBfdSessionConfEntry 28 }
hwBfdSessConfVcId OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is the ID of VC."
::= { hwBfdSessionConfEntry 29 }
hwBfdSessConfVsiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is the name of VSI."
::= { hwBfdSessionConfEntry 30 }
hwBfdSessConfVsiPeerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It is the peer-ip of VSI."
::= { hwBfdSessionConfEntry 31 }
hwBfdSessConfDiscrAuto OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Describe whether the discriminator can be auto allocated:
disabled: The discriminator can not be allocated automatically;
enabled: The discriminator can be allocated automatically."
DEFVAL { disabled }
::= { hwBfdSessionConfEntry 32 }
hwBfdSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBfdSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BFD Session Table describes the BFD sessions."
::= { hwBfdObjects 3 }
hwBfdSessionEntry OBJECT-TYPE
SYNTAX HwBfdSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BFD Session Entry describes BFD session."
INDEX { hwBfdSessIndex }
::= { hwBfdSessionTable 1 }
HwBfdSessionEntry ::=
SEQUENCE {
hwBfdSessIndex
Unsigned32,
hwBfdSessMIndex
Unsigned32,
hwBfdSessBindVRRP
INTEGER,
hwBfdSessCfgName
OCTET STRING,
hwBfdSessPeerAddr
IpAddress,
hwBfdSessBindIfIndex
INTEGER,
hwBfdSessBindIfName
OCTET STRING,
hwBfdSessLocalDiscr
Unsigned32,
hwBfdSessRemoteDiscr
Unsigned32,
hwBfdSessOperMode
Integer32,
hwBfdSessDetectMult
Unsigned32,
hwBfdSessDemandTimerInterval
BfdInterval,
hwBfdSessActualRxInterval
BfdInterval,
hwBfdSessActualTxInterval
BfdInterval,
hwBfdSessWTRInterval
INTEGER,
hwBfdSessTOS
INTEGER,
hwBfdSessState
Integer32,
hwBfdSessDiag
Integer32,
hwBfdSessSourceAddr
IpAddress,
hwBfdSessVrfIndex
Unsigned32,
hwBfdSessVPNName
OCTET STRING,
hwBfdSessType
INTEGER,
hwBfdSessBindAppType
INTEGER,
hwBfdSessDefaultIp
INTEGER,
hwBfdSessPISFlag
INTEGER,
hwBfdSessBindType
INTEGER,
hwBfdSessNextHop
IpAddress,
hwBfdSessStaticLspName
OCTET STRING,
hwBfdSessLspIndex
Unsigned32,
hwBfdSessPWSecondaryFlag
INTEGER,
hwBfdSessTunnelDetectType
INTEGER,
hwBfdSessVcId
Unsigned32,
hwBfdSessVsiName
OCTET STRING,
hwBfdSessVsiPeerAddr
IpAddress,
hwBfdSessDiscrAuto
EnabledStatus
}
hwBfdSessIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It is unique and the Index of this session."
::= { hwBfdSessionEntry 1 }
hwBfdSessMIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicate the configuration has Main Index."
::= { hwBfdSessionEntry 2 }
hwBfdSessBindVRRP OBJECT-TYPE
SYNTAX INTEGER (0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describe the capability of bound with VRRP for the BFD session.
0: not bind
1: bind"
::= { hwBfdSessionEntry 3 }
hwBfdSessCfgName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicate the name of the session which
will be display course information or statistic
information of the session."
::= { hwBfdSessionEntry 4 }
hwBfdSessPeerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Define the peer IP address of the BFD session."
::= { hwBfdSessionEntry 5 }
hwBfdSessBindIfIndex OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the index of the binding interface in the BFD session"
::= { hwBfdSessionEntry 6 }
hwBfdSessBindIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..47))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the name of the binding interface in the BFD session."
::= { hwBfdSessionEntry 7 }
hwBfdSessLocalDiscr OBJECT-TYPE
SYNTAX Unsigned32 (1..16384)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique, nonzero discriminator value generated by the
transmitting system, used to demultiplex multiple BFD
sessions between the same pair of system."
::= { hwBfdSessionEntry 8 }
hwBfdSessRemoteDiscr OBJECT-TYPE
SYNTAX Unsigned32 (0..16383)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The discriminator received from the corresponding remote
system. This field reflects back the received value of My
Discriminator, or is zero if that value is unknown."
::= { hwBfdSessionEntry 9 }
hwBfdSessOperMode OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describe the current operating mode configured with the BFD session.
0: Asynchronous mode with echo function;
1: Asynchronous mode without echo function;
2: Demand mode with echo function;
3: Demand mode without echo function;"
::= { hwBfdSessionEntry 10 }
hwBfdSessDetectMult OBJECT-TYPE
SYNTAX Unsigned32 (3..50)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Detect time multiplier. The negotiated transmit interval,
multiplied by this value, provides the detection time for
the transmitting system in Asynchronous mode."
::= { hwBfdSessionEntry 11 }
hwBfdSessDemandTimerInterval OBJECT-TYPE
SYNTAX BfdInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the detecting interval in the BFD session with the demand mode.
The unit is millisecond."
::= { hwBfdSessionEntry 12 }
hwBfdSessActualRxInterval OBJECT-TYPE
SYNTAX BfdInterval (3..30000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the minimum interval, in milliseconds, between
received BFD Control packets that this system is capable
of supporting."
::= { hwBfdSessionEntry 13 }
hwBfdSessActualTxInterval OBJECT-TYPE
SYNTAX BfdInterval (3..30000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the minimum interval, in milliseconds, that the
local system would like to use when transmitting BFD
Control packets."
::= { hwBfdSessionEntry 14 }
hwBfdSessWTRInterval OBJECT-TYPE
SYNTAX INTEGER (0..60)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The WTR interval of the BFD session.
The unit is minute."
::= { hwBfdSessionEntry 15 }
hwBfdSessTOS OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the TOS value of bfd packet."
::= { hwBfdSessionEntry 16 }
hwBfdSessState OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describe the current state of the BFD session.
0: Admin Down;
1: Down;
2: Init;
3: Up;"
::= { hwBfdSessionEntry 17 }
hwBfdSessDiag OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A diagnostic code specifying the local system's reason for
the last session state change.
Values are:
0--No Diagnostic
1--Control Detection Time Expired
2--Echo Function Failed
3--Neighbor Signaled Session Down
4--Forwarding Plane Reset
5--Path Down
6--Concatenated Path Down
7--Administratively Down
8--Reverse Concatenated Path Down
9--Neighbor Signaled Session Down (Receive AdminDown)
10-31--Reserved for future use
"
::= { hwBfdSessionEntry 18 }
hwBfdSessSourceAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source address of the session."
::= { hwBfdSessionEntry 19 }
hwBfdSessVrfIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the VPN interface."
::= { hwBfdSessionEntry 20 }
hwBfdSessVPNName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of VPN interface."
::= { hwBfdSessionEntry 21 }
hwBfdSessType OBJECT-TYPE
SYNTAX INTEGER
{
static(1),
dynamic(2),
entireDynamic(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the BFD session.
1:static
2:dynamic
3:entire dynamic"
::= { hwBfdSessionEntry 22 }
-- other or unknown
hwBfdSessBindAppType OBJECT-TYPE
SYNTAX INTEGER
{
noApplication(1),
vrrp(2),
ifnet(3),
vrrpAndIfnet(4),
bgp(5),
ospf(6),
bgpAndOspf(7),
oamLspmL2vpn(8),
oamLspmTnlL2vpn(9),
lspmTnlL2vpnTnlps(10),
oamMplsfwL2vpn(11),
isis(12),
vsiPw(13),
vrrpOamLspmL2vpn(14),
vrrpOamTnlL2vpn(15),
vrrpLspmTnlL2vpnTnlps(16),
vrrpOamMplsfwL2vpn(17),
pim(18),
bgpIsis(19),
bgpPim(20),
ospfIsis(21),
ospfPim(22),
isisPim(23),
bgpOspfIsis(24),
bgpIspfPim(25),
bgpIsisPim(26),
ospfIsisPim(27),
bgpOspfIsisPim(28)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Application type that this BFD session has been bound to
1:No application
2:VRRP
3:IFNET
4:VRRP&IFNET
5:BGP
6:OSPF
7:BGP&OSPF
8:OAM&LSPM&L2VPN (for LDP LSP and static LSP)
9:OAM&LSPM&TUNNEL&L2VPN (for TE_Tunnnel)
10:LSPM&TUNNEL&TUNNEL_PS&L2VPN (for TE_LSP)
11:OAM&MPLSFW&L2VPN (for PW)
12:ISIS
13:VSIPW (for VSI PW)
14:VRRP&OAM&LSPM&L2VPN
15:VRRP&OAM&TUNNEL&L2VPN
16:VRRP&LSPM&TUNNEL&TUNNEL_PS&L2VPN
17:VRRP&OAM&MPLSFW&L2VPN
18:PIM
19:BGP&ISIS
20:BGP&PIM
21:OSPF&ISIS
22:OSPF&PIM
23:ISIS&PIM
24:BGP&OSPF&ISIS
25:BGP&OSPF&PIM
26:BGP&ISIS&PIM
27:OSPF&ISIS&PIM
28:BGPOSPF&ISIS&PIM"
::= { hwBfdSessionEntry 23 }
hwBfdSessDefaultIp OBJECT-TYPE
SYNTAX INTEGER
{
no(1),
yes(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BFD session use default multicast IP as the detect peer-ip
1 : do not use the default multicast IP
2 : use the default multicast IP"
::= { hwBfdSessionEntry 24 }
hwBfdSessPISFlag OBJECT-TYPE
SYNTAX INTEGER
{
false(1),
true(2),
subif(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of BFD session is associated with the state of the binding interface
1 : do not associate with interface state
2 : associate with interface state
3 : associate with interface and correlative sub interface."
::= { hwBfdSessionEntry 25 }
hwBfdSessBindType OBJECT-TYPE
SYNTAX INTEGER
{
interfaceIp(1),
peerIp(2),
sourceIp(3),
ifAndSourceIp(4),
fec(5),
tunnelIf(6),
ospf(7),
isis(8),
ldpLsp(9),
staticLsp(10),
teLsp(11),
teTunnel(12),
pw(13),
vsiPw (15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The binding type of the BFD session:
1: BFD for IP with peer-ip and interface;
2: BFD for IP only with peer-ip;
3: BFD for IP with peer-ip and source-ip;
4: BFD for IP with peer-ip, interface and source-ip;
5: BFD for FEC(NOT support now);
6: BFD for Tunnel interface(NOT support now);
7: BFD for OSPF;
8: BFD for ISIS;
9: BFD for LDP-LSP;
10: BFD for static LSP;
11: BFD for TE-LSP;
12: BFD for TE-Tunnel;
13: BFD for PW;
15: BFD for VSI PW;"
::= { hwBfdSessionEntry 26 }
hwBfdSessNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the next hop of the BFD session."
::= { hwBfdSessionEntry 27 }
hwBfdSessStaticLspName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the static LSP name of the BFD session."
::= { hwBfdSessionEntry 28 }
hwBfdSessLspIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the index of the static LSP or LDP LSP in BFD session, mapping the channel index in MPLS network."
::= { hwBfdSessionEntry 29 }
hwBfdSessPWSecondaryFlag OBJECT-TYPE
SYNTAX INTEGER
{
flagMasterPW(1),
flagSecondaryPW(2),
flagNoPW(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The role of the PW bound with BFD session:
1: master PW;
2: secondary PW;
3: no PW;"
DEFVAL { 1 }
::= { hwBfdSessionEntry 30 }
hwBfdSessTunnelDetectType OBJECT-TYPE
SYNTAX INTEGER
{
flagBothDown(1),
flagNeighborDown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Set the failure notifies policy type:
1: Notify applications when detecting both Detect-Down and Neighbor-Down;
2: Notify applications only when detecting Neighbor-Down;"
DEFVAL { 1 }
::= { hwBfdSessionEntry 31 }
hwBfdSessVcId OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the ID of VC."
::= { hwBfdSessionEntry 32 }
hwBfdSessVsiName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the name of VSI."
::= { hwBfdSessionEntry 33 }
hwBfdSessVsiPeerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It is the peer-ip of VSI."
::= { hwBfdSessionEntry 34 }
hwBfdSessDiscrAuto OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describe whether the discriminator can be auto allocated:
disabled: The discriminator can not be allocated automatically;
enabled: The discriminator can be allocated automatically."
DEFVAL { disabled }
::= { hwBfdSessionEntry 35 }
hwBfdSessionPerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBfdSessionPerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies BFD Session performance counters."
::= { hwBfdObjects 4 }
hwBfdSessionPerEntry OBJECT-TYPE
SYNTAX HwBfdSessionPerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by a BFD-enabled
node for every BFD Session. "
INDEX { hwBfdSessPerIndex }
::= { hwBfdSessionPerTable 1 }
HwBfdSessionPerEntry ::=
SEQUENCE {
hwBfdSessPerIndex
Unsigned32,
hwBfdSessPerfPktIn
Counter32,
hwBfdSessPerfPktInHC
Counter32,
hwBfdSessPerfPktOut
Counter32,
hwBfdSessPerfPktOutHC
Counter32,
hwBfdSessPerfBadIn
Counter32,
hwBfdSessPerfBadInHC
Counter32,
hwBfdSessPerfBadOut
Counter32,
hwBfdSessPerfBadOutHC
Counter32,
hwBfdSessPerfLastSessDownTime
OCTET STRING,
hwBfdSessPerfSessDownCount
Unsigned32,
hwBfdSessPerfSessShortBreakCount
Unsigned32,
hwBfdSessionPerStartTime
OCTET STRING
}
hwBfdSessPerIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of BFD session statistics."
::= { hwBfdSessionPerEntry 1 }
hwBfdSessPerfPktIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistical information of the received Octets in local
system in this session.The total received packet number."
::= { hwBfdSessionPerEntry 2 }
hwBfdSessPerfPktInHC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistical information of the received Octets in local
system in this session.The high 4 bytes of total received
packet number."
::= { hwBfdSessionPerEntry 3 }
hwBfdSessPerfPktOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistical information of the send Packets in local
system in this session."
::= { hwBfdSessionPerEntry 4 }
hwBfdSessPerfPktOutHC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistical information of the send Packets in local
system in this session.The high 4 bytes of total send
packet number"
::= { hwBfdSessionPerEntry 5 }
hwBfdSessPerfBadIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistical information of the received Errors in local
system in this session."
::= { hwBfdSessionPerEntry 6 }
hwBfdSessPerfBadInHC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistical information of the received Errors in local
system in this session.The high 4 bytes of total received wrong
packet number."
::= { hwBfdSessionPerEntry 7 }
hwBfdSessPerfBadOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistical information of the send Errors in local
system in this session."
::= { hwBfdSessionPerEntry 8 }
hwBfdSessPerfBadOutHC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistical information of the send Errors in local
system in this session.The high 4 bytes of total send
wrong packet number"
::= { hwBfdSessionPerEntry 9 }
hwBfdSessPerfLastSessDownTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The statistical information of the trammitted Octets in local
system in this session."
::= { hwBfdSessionPerEntry 10 }
hwBfdSessPerfSessDownCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of session down."
::= { hwBfdSessionPerEntry 11 }
hwBfdSessPerfSessShortBreakCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total count of session shortbreak."
::= { hwBfdSessionPerEntry 12 }
hwBfdSessionPerStartTime OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that session start detection."
::= { hwBfdSessionPerEntry 13 }
hwBfdSlotTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBfdSlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Slot table of BFD entries."
::= { hwBfdObjects 5 }
hwBfdSlotEntry OBJECT-TYPE
SYNTAX HwBfdSlotEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BFD statistics on specify board of containing the following objects."
INDEX { hwBfdSlotID }
::= { hwBfdSlotTable 1 }
HwBfdSlotEntry ::=
SEQUENCE {
hwBfdSlotID
Unsigned32,
hwBfdSlotReserveOneHopSessNum
Unsigned32,
hwBfdSlotOneHopSessNum
Unsigned32,
hwBfdSlotCurrentSessNum
Unsigned32,
hwBfdSlotRowStatus
RowStatus
}
hwBfdSlotID OBJECT-TYPE
SYNTAX Unsigned32 (0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID of Slot."
::= { hwBfdSlotEntry 1 }
hwBfdSlotReserveOneHopSessNum OBJECT-TYPE
SYNTAX Unsigned32 (0..512)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of session reserving for one-hop session on the board."
::= { hwBfdSlotEntry 2 }
hwBfdSlotOneHopSessNum OBJECT-TYPE
SYNTAX Unsigned32 (0..512)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of session for one-hop session on the board."
::= { hwBfdSlotEntry 3 }
hwBfdSlotCurrentSessNum OBJECT-TYPE
SYNTAX Unsigned32 (0..512)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of session on the board on current."
::= { hwBfdSlotEntry 4 }
hwBfdSlotRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of conceptual rows."
::= { hwBfdSlotEntry 5 }
hwBfdTtlConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBfdTtlConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The TTL configuration table."
::= { hwBfdObjects 6 }
hwBfdTtlConfEntry OBJECT-TYPE
SYNTAX HwBfdTtlConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The TTL configuration entry."
INDEX { hwBfdTtlConfAddr, hwBfdTtlConfMaskLen,hwBfdTtlConfType}
::= { hwBfdTtlConfTable 1 }
HwBfdTtlConfEntry ::=
SEQUENCE {
hwBfdTtlConfAddr
IpAddress,
hwBfdTtlConfMaskLen
Integer32,
hwBfdTtlConfType
INTEGER,
hwBfdTtlConfValue
Integer32,
hwBfdTtlConfRowStatus
RowStatus
}
hwBfdTtlConfAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address."
::= { hwBfdTtlConfEntry 1 }
hwBfdTtlConfMaskLen OBJECT-TYPE
SYNTAX Integer32 (8..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Length of IP address mask."
::= { hwBfdTtlConfEntry 2 }
hwBfdTtlConfType OBJECT-TYPE
SYNTAX INTEGER
{
singleHop(1),
multiHop(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of BFD session."
::= { hwBfdTtlConfEntry 3 }
hwBfdTtlConfValue OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"TTL value."
::= { hwBfdTtlConfEntry 4 }
hwBfdTtlConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry."
::= { hwBfdTtlConfEntry 50 }
hwBfdNotifications OBJECT IDENTIFIER ::= { hwBFDMIB 3 }
hwBfdSessDown NOTIFICATION-TYPE
OBJECTS { hwBfdSessCfgName, hwBfdSessPeerAddr, hwBfdSessBindIfIndex, hwBfdSessBindIfName, hwBfdSessDiag,
hwBfdSessVrfIndex, hwBfdSessVPNName, hwBfdSessType, hwBfdSessDefaultIp, hwBfdSessBindType,
hwBfdSessStaticLspName, hwBfdSessPWSecondaryFlag, hwBfdSessNextHop, hwBfdSessVcId, hwBfdSessVsiName,
hwBfdSessVsiPeerAddr, hwBfdSessDiscrAuto }
STATUS current
DESCRIPTION
"This trap occurred when the state of the BFD session
became down. The BFD session is characterized
by the objects in this node."
::= { hwBfdNotifications 1 }
hwBfdSessUp NOTIFICATION-TYPE
OBJECTS { hwBfdSessCfgName, hwBfdSessPeerAddr, hwBfdSessBindIfIndex, hwBfdSessBindIfName, hwBfdSessDiag,
hwBfdSessVrfIndex, hwBfdSessVPNName, hwBfdSessType, hwBfdSessDefaultIp, hwBfdSessBindType,
hwBfdSessStaticLspName, hwBfdSessPWSecondaryFlag, hwBfdSessNextHop, hwBfdSessVcId, hwBfdSessVsiName,
hwBfdSessVsiPeerAddr, hwBfdSessDiscrAuto }
STATUS current
DESCRIPTION
"This trap occurred when the state of the BFD session
became up. The BFD session is characterized
by the objects in this node."
::= { hwBfdNotifications 2 }
hwBfdSessReachLimit NOTIFICATION-TYPE
OBJECTS { hwBfdSessLimitNumber }
STATUS current
DESCRIPTION
"There is the notify when the session number reach the global limit."
::= { hwBfdNotifications 3 }
hwBfdSessReachLimitBindIf NOTIFICATION-TYPE
OBJECTS { hwBfdSessConfBindIfName, hwBfdSessInterfaceLimitNumber }
STATUS current
DESCRIPTION
"There is the notify when the session number reach the interface limit."
::= { hwBfdNotifications 4 }
hwBfdConformance OBJECT IDENTIFIER ::= { hwBFDMIB 4 }
hwBfdCompliances OBJECT IDENTIFIER ::= { hwBfdConformance 1 }
-- this module
hwBfdFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Description."
MODULE -- this module
MANDATORY-GROUPS { hwBfdGroup, hwBfdSessGroup, hwBfdObsoleteGroup, hwBfdNotificationGroup }
::= { hwBfdCompliances 1 }
hwBfdGroups OBJECT IDENTIFIER ::= { hwBfdConformance 2 }
hwBfdGroup OBJECT-GROUP
OBJECTS { hwBfdVersionNumber, hwBfdAdminStatus, hwBfdSessLimitNumber, hwBfdSessInterfaceLimitNumber, hwBfdSessStaticNumber,
hwBfdSessDynamicNumber, hwBfdSessGlobalDefaultIpAddr, hwBfdEchoPassiveStatus, hwBfdEchoAclNum, hwBfdSessDynamicPingInterval,
hwBfdSessDynamicSupportPassive, hwBfdSessDelayUpTime, hwBfdSessMultiDstPort, hwBfdTrapSendInterval, hwBfdIfConfName, hwBfdIfConfDeleting, hwBfdIfConfAvailable, hwBfdIfConfSessCnt,
hwBfdIfConfRowStatus, hwBfdSlotReserveOneHopSessNum,hwBfdSlotCurrentSessNum, hwBfdSlotRowStatus
}
STATUS current
DESCRIPTION
"Description."
::= { hwBfdGroups 1 }
hwBfdSessGroup OBJECT-GROUP
OBJECTS { hwBfdSessConfMIndex, hwBfdSessConfLocalDiscr, hwBfdSessConfRemoteDiscr, hwBfdSessConfPeerAddr, hwBfdSessConfBindIfIndex,
hwBfdSessConfBindIfName, hwBfdSessConfDemandEnable, hwBfdSessConfDemandTimerInterval, hwBfdSessConfDetectMult, hwBfdSessConfDesiredMinRxInterval,
hwBfdSessConfDesiredMinTxInterval, hwBfdSessConfWTRInterval, hwBfdSessConfTOS, hwBfdSessConfPSTFlag, hwBfdSessConfCommitFlag,
hwBfdSessConfAdminStatus, hwBfdSessConfRowStatus, hwBfdSessConfSourceAddr, hwBfdSessConfVrfIndex, hwBfdSessConfVPNName,
hwBfdSessConfDefaultIp, hwBfdSessConfPISFlag, hwBfdSessConfBindType, hwBfdSessConfNextHop, hwBfdSessConfStaticLspName,
hwBfdSessConfPWSecondaryFlag, hwBfdSessConfTunnelDetectType, hwBfdSessConfVcId, hwBfdSessConfVsiName, hwBfdSessConfVsiPeerAddr, hwBfdSessConfDiscrAuto, hwBfdSessMIndex, hwBfdSessBindVRRP,
hwBfdSessCfgName, hwBfdSessPeerAddr, hwBfdSessBindIfIndex, hwBfdSessBindIfName, hwBfdSessLocalDiscr,
hwBfdSessRemoteDiscr, hwBfdSessOperMode, hwBfdSessDetectMult, hwBfdSessDemandTimerInterval, hwBfdSessActualRxInterval,
hwBfdSessActualTxInterval, hwBfdSessWTRInterval, hwBfdSessTOS, hwBfdSessState, hwBfdSessDiag,
hwBfdSessSourceAddr, hwBfdSessVrfIndex, hwBfdSessVPNName, hwBfdSessType, hwBfdSessBindAppType,
hwBfdSessDefaultIp, hwBfdSessPISFlag, hwBfdSessBindType, hwBfdSessNextHop, hwBfdSessStaticLspName,
hwBfdSessLspIndex, hwBfdSessPWSecondaryFlag, hwBfdSessTunnelDetectType, hwBfdSessVcId, hwBfdSessVsiName, hwBfdSessVsiPeerAddr, hwBfdSessDiscrAuto, hwBfdSessPerfPktIn,
hwBfdSessPerfPktInHC, hwBfdSessPerfPktOut, hwBfdSessPerfPktOutHC, hwBfdSessPerfBadIn, hwBfdSessPerfBadInHC,
hwBfdSessPerfBadOut, hwBfdSessPerfBadOutHC, hwBfdSessPerfLastSessDownTime, hwBfdSessPerfSessDownCount, hwBfdSessPerfSessShortBreakCount,
hwBfdSessionPerStartTime, hwBfdTtlConfValue, hwBfdTtlConfRowStatus}
STATUS current
DESCRIPTION
"Description."
::= { hwBfdGroups 2 }
hwBfdObsoleteGroup OBJECT-GROUP
OBJECTS { hwBfdIfConfEnable ,hwBfdSlotOneHopSessNum}
STATUS obsolete
DESCRIPTION
"Description."
::= { hwBfdGroups 3 }
hwBfdNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { hwBfdSessDown, hwBfdSessUp, hwBfdSessReachLimit, hwBfdSessReachLimitBindIf }
STATUS current
DESCRIPTION
"Description."
::= { hwBfdGroups 4 }
END
--
-- HUAWEI-BFD-MIB.mib
--
Reference in New Issue View Git Blame Copy Permalink