librenms-librenms/mibs/junos/mib-jnx-l2cp-features.txt

JUNIPER-L2CP-FEATURES-MIB DEFINITIONS ::= BEGIN

IMPORTS

    OBJECT-TYPE, MODULE-IDENTITY,
    NOTIFICATION-TYPE FROM SNMPv2-SMI
    TruthValue  FROM SNMPv2-TC
    ifIndex  FROM IF-MIB
    dot1dStpPort, dot1dStpPortEntry  FROM BRIDGE-MIB
    jnxL2cpMibRoot FROM JUNIPER-SMI;

jnxL2cpFeaturesMIB MODULE-IDENTITY
    LAST-UPDATED "200712170000Z"
    ORGANIZATION "Juniper Networks, Inc."
    CONTACT-INFO
        "Juniper Technical Assistance Center
         Juniper Networks, Inc.
         1194 N. Mathilda Avenue
         Sunnyvale, CA 94089
         E-mail: support@juniper.net"
    DESCRIPTION
        "This mib module is for Juniper Networks Proprietory
         Layer 2 control protocol (L2CP) features"
    ::= { jnxL2cpMibRoot 1 }


jnxL2cpObjects  OBJECT IDENTIFIER ::=  { jnxL2cpFeaturesMIB 1 }

jnxL2cpNotifications  OBJECT IDENTIFIER ::=  { jnxL2cpFeaturesMIB 2 }

jnxL2cpStpProtectObjects  OBJECT IDENTIFIER ::=  { jnxL2cpObjects 1 }

jnxL2cpBpduProtectObjects  OBJECT IDENTIFIER ::=  { jnxL2cpObjects 2 }

jnxDot1dStpPortProtectTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF JnxDot1dStpPortProtectEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines the jnxDot1dStp Port Table for providing enterprise specific
         extensions for Root Protect and Loop Protect to the corresponding 
         dot1dStpPortTable entry."
   ::= { jnxL2cpStpProtectObjects 1 }

jnxDot1dStpPortProtectEntry OBJECT-TYPE
    SYNTAX      JnxDot1dStpPortProtectEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the jnxDot1dStpPortProtectTable.  This essentially
         augments the dot1dStpPortTable with additional objects."
    AUGMENTS    { dot1dStpPortEntry }
    ::= { jnxDot1dStpPortProtectTable 1 }

JnxDot1dStpPortProtectEntry ::=
    SEQUENCE {
        jnxDot1dStpPortRootProtectEnabled  TruthValue,
        jnxDot1dStpPortRootProtectState    INTEGER,    
        jnxDot1dStpPortLoopProtectEnabled  TruthValue,
        jnxDot1dStpPortLoopProtectState    INTEGER    
    }

jnxDot1dStpPortRootProtectEnabled  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A Boolean value set by management indicating whether Root protect 
         functionality is enabled on the port. If TRUE causes the Port not
         to be selected as Root Port, even it has the best spanning tree 
         priority vector. This parameter should be FALSE by default. "
    ::= { jnxDot1dStpPortProtectEntry 1 }

jnxDot1dStpPortRootProtectState OBJECT-TYPE
    SYNTAX      INTEGER {
                    no-error (0),
                    root-prevented (1)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates whether the port was prevented from being a root port.
         This parameter will always return 'no-error (0)' if 
         jnxDot1dStpPortRootProtectEnabled is FALSE. "
    ::= { jnxDot1dStpPortProtectEntry 2 }

jnxDot1dStpPortLoopProtectEnabled  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A Boolean value set by management indicating whether Loop protect 
         functionality is enabled on the port. If TRUE causes the Port not
         to be selected as Designated Port when the received superior BPDU 
         is aged out. This parameter should be FALSE by default. "
    ::= { jnxDot1dStpPortProtectEntry 3 }

jnxDot1dStpPortLoopProtectState OBJECT-TYPE
    SYNTAX      INTEGER {
                    no-error (0),
                    loop-prevented (1)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates whether a potential Loop was prevented on the port
         This parameter will always return 'no-error (0)' if 
         jnxDot1dStpPortLoopProtectEnabled is FALSE. "
    ::= { jnxDot1dStpPortProtectEntry 4 }

jnxL2cpBpduProtectPortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF JnxL2cpBpduProtectPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines a Port Table for BPDU Protect information. This contains 
         only those ports on which BPDU Protect can be configured."
    ::= { jnxL2cpBpduProtectObjects 1 }

jnxL2cpBpduProtectPortEntry OBJECT-TYPE
    SYNTAX      JnxL2cpBpduProtectPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the jnxL2cpBpduProtectPortTable.  A list
         containing BPDU Protect information for each Port."
    INDEX  { ifIndex }
    ::= { jnxL2cpBpduProtectPortTable 1 }

JnxL2cpBpduProtectPortEntry ::=
    SEQUENCE {
        jnxL2cpBpduProtectPortEnabled  TruthValue,
        jnxL2cpPortBpduError           INTEGER
    }

jnxL2cpBpduProtectPortEnabled  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A Boolean value set by management indicating whether BPDU protect 
         functionality is enabled on the port. If TRUE causes the Port to be
         disabled (link down) upon receipt of a BPDU. This parameter should be
         FALSE by default. "
    ::= { jnxL2cpBpduProtectPortEntry 1 }

jnxL2cpPortBpduError OBJECT-TYPE
    SYNTAX      INTEGER {
                    no-error (0),
                    detected (1)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates whether a BPDU was received on the port.
         This parameter will always return 'no-error (0)' if 
         jnxL2cpBpduProtectPortEnabled is FALSE. "
    ::= { jnxL2cpBpduProtectPortEntry 2 }

jnxL2cpBpduProtectDisableTimeout OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Returns the value of time (in seconds) after which a port on
         which BPDU error was detected will be re-enabled. A returned
         value of 0 indicates that port will not be re-enabled 
         automatically."
    ::= { jnxL2cpBpduProtectObjects 2 }

jnxL2cpProtectTraps  OBJECT IDENTIFIER ::= { jnxL2cpNotifications 0 }

jnxPortRootProtectStateChangeTrap NOTIFICATION-TYPE
    OBJECTS {
        jnxDot1dStpPortRootProtectState
    }
    STATUS             current
    DESCRIPTION
        "Generated when the ports Root-protect state (no-error or root-prevented) 
         changes."
   ::= { jnxL2cpProtectTraps 1 }

jnxPortLoopProtectStateChangeTrap NOTIFICATION-TYPE
    OBJECTS {
        jnxDot1dStpPortLoopProtectState
    }
    STATUS             current
    DESCRIPTION
        "Generated when the ports Loop-protect state (no-error or loop-prevented) 
         changes."
   ::= { jnxL2cpProtectTraps 2 }

jnxPortBpduErrorStatusChangeTrap NOTIFICATION-TYPE
    OBJECTS {
        jnxL2cpPortBpduError
    }
    STATUS             current
    DESCRIPTION
        "Generated when the ports BPDU error state (no-error or detected) 
         changes."
   ::= { jnxL2cpProtectTraps 3 }

END