mirror of
https://github.com/librenms/librenms.git
synced 2024-10-07 16:52:45 +00:00
f090850d8f
git-svn-id: http://www.observium.org/svn/observer/trunk@1582 61d68cd4-352d-0410-923a-c4978735b2b8
1116 lines
48 KiB
Plaintext
1116 lines
48 KiB
Plaintext
EtherLike-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
|
|
Counter32, mib-2, transmission
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
ifIndex, InterfaceIndex
|
|
FROM IF-MIB;
|
|
|
|
etherMIB MODULE-IDENTITY
|
|
LAST-UPDATED "9806032150Z" -- June 3, 1998
|
|
ORGANIZATION "IETF 802.3 Hub MIB Working Group"
|
|
CONTACT-INFO
|
|
"WG E-mail: hubmib@hprnd.rose.hp.com
|
|
To subscribe: hubmib-request@hprnd.rose.hp.com
|
|
|
|
|
|
Chair: Dan Romascanu
|
|
Postal: LANNET Ltd.
|
|
Atidum Technology Park, Bldg. 3
|
|
Tel Aviv 61131
|
|
Israel
|
|
Tel: +972 3 645 8414
|
|
E-mail: dromasca@lannet.com
|
|
|
|
Editor: John Flick
|
|
Postal: Hewlett-Packard Company
|
|
8000 Foothills Blvd. M/S 5556
|
|
Roseville, CA 95747-5556
|
|
USA
|
|
Tel: +1 916 785 4018
|
|
Fax: +1 916 785 3583
|
|
E-mail: johnf@hprnd.rose.hp.com
|
|
|
|
Editor: Jeffrey Johnson
|
|
Postal: RedBack Networks
|
|
2570 North First Street, Suite 410
|
|
San Jose, CA, 95131
|
|
USA
|
|
Tel: +1 408 571 2699
|
|
Fax: +1 408 571 2698
|
|
E-Mail: jeff@redbacknetworks.com"
|
|
|
|
DESCRIPTION "The MIB module to describe generic objects for
|
|
Ethernet-like network interfaces. This MIB is an
|
|
updated version of the Ethernet-like MIB in RFC
|
|
1650."
|
|
|
|
REVISION "9806032150Z"
|
|
DESCRIPTION "Updated to include support for 100 Mb/sec
|
|
interfaces."
|
|
|
|
REVISION "9402030400Z"
|
|
DESCRIPTION "Version published as RFC 1650."
|
|
::= { mib-2 35 }
|
|
|
|
etherMIBObjects OBJECT IDENTIFIER ::= { etherMIB 1 }
|
|
|
|
dot3 OBJECT IDENTIFIER ::= { transmission 7 }
|
|
|
|
-- the Ethernet-like Statistics group
|
|
|
|
dot3StatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot3StatsEntry
|
|
MAX-ACCESS not-accessible
|
|
|
|
|
|
STATUS current
|
|
DESCRIPTION "Statistics for a collection of ethernet-like
|
|
interfaces attached to a particular system."
|
|
::= { dot3 2 }
|
|
|
|
dot3StatsEntry OBJECT-TYPE
|
|
SYNTAX Dot3StatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "Statistics for a particular interface to an
|
|
ethernet-like medium."
|
|
INDEX { dot3StatsIndex }
|
|
::= { dot3StatsTable 1 }
|
|
|
|
Dot3StatsEntry ::=
|
|
SEQUENCE {
|
|
dot3StatsIndex InterfaceIndex,
|
|
dot3StatsAlignmentErrors Counter32,
|
|
dot3StatsFCSErrors Counter32,
|
|
dot3StatsSingleCollisionFrames Counter32,
|
|
dot3StatsMultipleCollisionFrames Counter32,
|
|
dot3StatsSQETestErrors Counter32,
|
|
dot3StatsDeferredTransmissions Counter32,
|
|
dot3StatsLateCollisions Counter32,
|
|
dot3StatsExcessiveCollisions Counter32,
|
|
dot3StatsInternalMacTransmitErrors Counter32,
|
|
dot3StatsCarrierSenseErrors Counter32,
|
|
dot3StatsFrameTooLongs Counter32,
|
|
dot3StatsInternalMacReceiveErrors Counter32,
|
|
dot3StatsEtherChipSet OBJECT IDENTIFIER,
|
|
dot3StatsSymbolErrors Counter32
|
|
}
|
|
|
|
dot3StatsIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "An index value that uniquely identifies an
|
|
interface to an ethernet-like medium. The
|
|
interface identified by a particular value of
|
|
this index is the same interface as identified
|
|
by the same value of ifIndex."
|
|
::= { dot3StatsEntry 1 }
|
|
|
|
dot3StatsAlignmentErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
|
|
|
|
DESCRIPTION "A count of frames received on a particular
|
|
interface that are not an integral number of
|
|
octets in length and do not pass the FCS check.
|
|
|
|
The count represented by an instance of this
|
|
object is incremented when the alignmentError
|
|
status is returned by the MAC service to the
|
|
LLC (or other MAC user). Received frames for
|
|
which multiple error conditions obtain are,
|
|
according to the conventions of IEEE 802.3
|
|
Layer Management, counted exclusively according
|
|
to the error status presented to the LLC."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { dot3StatsEntry 2 }
|
|
|
|
dot3StatsFCSErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of frames received on a particular
|
|
interface that are an integral number of octets
|
|
in length but do not pass the FCS check.
|
|
|
|
The count represented by an instance of this
|
|
object is incremented when the frameCheckError
|
|
status is returned by the MAC service to the
|
|
LLC (or other MAC user). Received frames for
|
|
which multiple error conditions obtain are,
|
|
according to the conventions of IEEE 802.3
|
|
Layer Management, counted exclusively according
|
|
to the error status presented to the LLC."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { dot3StatsEntry 3 }
|
|
|
|
dot3StatsSingleCollisionFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of successfully transmitted frames on
|
|
a particular interface for which transmission
|
|
is inhibited by exactly one collision.
|
|
|
|
A frame that is counted by an instance of this
|
|
object is also counted by the corresponding
|
|
instance of either the ifOutUcastPkts,
|
|
ifOutMulticastPkts, or ifOutBroadcastPkts,
|
|
and is not counted by the corresponding
|
|
instance of the dot3StatsMultipleCollisionFrames
|
|
|
|
|
|
object."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { dot3StatsEntry 4 }
|
|
|
|
dot3StatsMultipleCollisionFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of successfully transmitted frames on
|
|
a particular interface for which transmission
|
|
is inhibited by more than one collision.
|
|
|
|
A frame that is counted by an instance of this
|
|
object is also counted by the corresponding
|
|
instance of either the ifOutUcastPkts,
|
|
ifOutMulticastPkts, or ifOutBroadcastPkts,
|
|
and is not counted by the corresponding
|
|
instance of the dot3StatsSingleCollisionFrames
|
|
object."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { dot3StatsEntry 5 }
|
|
|
|
dot3StatsSQETestErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of times that the SQE TEST ERROR
|
|
message is generated by the PLS sublayer for a
|
|
particular interface. The SQE TEST ERROR
|
|
message is defined in section 7.2.2.2.4 of
|
|
ANSI/IEEE 802.3-1985 and its generation is
|
|
described in section 7.2.4.6 of the same
|
|
document."
|
|
REFERENCE "ANSI/IEEE Std 802.3-1985 Carrier Sense
|
|
Multiple Access with Collision Detection Access
|
|
Method and Physical Layer Specifications"
|
|
::= { dot3StatsEntry 6 }
|
|
|
|
dot3StatsDeferredTransmissions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of frames for which the first
|
|
transmission attempt on a particular interface
|
|
is delayed because the medium is busy.
|
|
|
|
|
|
The count represented by an instance of this
|
|
object does not include frames involved in
|
|
collisions."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { dot3StatsEntry 7 }
|
|
|
|
dot3StatsLateCollisions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of times that a collision is
|
|
detected on a particular interface later than
|
|
512 bit-times into the transmission of a
|
|
packet.
|
|
|
|
Five hundred and twelve bit-times corresponds
|
|
to 51.2 microseconds on a 10 Mbit/s system. A
|
|
(late) collision included in a count
|
|
represented by an instance of this object is
|
|
also considered as a (generic) collision for
|
|
purposes of other collision-related
|
|
statistics."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { dot3StatsEntry 8 }
|
|
|
|
dot3StatsExcessiveCollisions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of frames for which transmission on a
|
|
particular interface fails due to excessive
|
|
collisions."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { dot3StatsEntry 9 }
|
|
|
|
dot3StatsInternalMacTransmitErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of frames for which transmission on a
|
|
particular interface fails due to an internal
|
|
MAC sublayer transmit error. A frame is only
|
|
counted by an instance of this object if it is
|
|
not counted by the corresponding instance of
|
|
either the dot3StatsLateCollisions object, the
|
|
dot3StatsExcessiveCollisions object, or the
|
|
dot3StatsCarrierSenseErrors object.
|
|
|
|
|
|
The precise meaning of the count represented by
|
|
an instance of this object is implementation-
|
|
specific. In particular, an instance of this
|
|
object may represent a count of transmission
|
|
errors on a particular interface that are not
|
|
otherwise counted."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { dot3StatsEntry 10 }
|
|
|
|
dot3StatsCarrierSenseErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of times that the carrier sense
|
|
condition was lost or never asserted when
|
|
attempting to transmit a frame on a particular
|
|
interface.
|
|
|
|
The count represented by an instance of this
|
|
object is incremented at most once per
|
|
transmission attempt, even if the carrier sense
|
|
condition fluctuates during a transmission
|
|
attempt."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { dot3StatsEntry 11 }
|
|
|
|
-- { dot3StatsEntry 12 } is not assigned
|
|
|
|
dot3StatsFrameTooLongs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of frames received on a particular
|
|
interface that exceed the maximum permitted
|
|
frame size.
|
|
|
|
The count represented by an instance of this
|
|
object is incremented when the frameTooLong
|
|
status is returned by the MAC service to the
|
|
LLC (or other MAC user). Received frames for
|
|
which multiple error conditions obtain are,
|
|
according to the conventions of IEEE 802.3
|
|
Layer Management, counted exclusively according
|
|
to the error status presented to the LLC."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { dot3StatsEntry 13 }
|
|
|
|
-- { dot3StatsEntry 14 } is not assigned
|
|
|
|
|
|
-- { dot3StatsEntry 15 } is not assigned
|
|
|
|
dot3StatsInternalMacReceiveErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of frames for which reception on a
|
|
particular interface fails due to an internal
|
|
MAC sublayer receive error. A frame is only
|
|
counted by an instance of this object if it is
|
|
not counted by the corresponding instance of
|
|
either the dot3StatsFrameTooLongs object, the
|
|
dot3StatsAlignmentErrors object, or the
|
|
dot3StatsFCSErrors object.
|
|
The precise meaning of the count represented by
|
|
an instance of this object is implementation-
|
|
specific. In particular, an instance of this
|
|
object may represent a count of receive errors
|
|
on a particular interface that are not
|
|
otherwise counted."
|
|
REFERENCE "IEEE 802.3 Layer Management"
|
|
::= { dot3StatsEntry 16 }
|
|
|
|
dot3StatsEtherChipSet OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "This object contains an OBJECT IDENTIFIER
|
|
which identifies the chipset used to
|
|
realize the interface. Ethernet-like
|
|
interfaces are typically built out of
|
|
several different chips. The MIB implementor
|
|
is presented with a decision of which chip
|
|
to identify via this object. The implementor
|
|
should identify the chip which is usually
|
|
called the Medium Access Control chip.
|
|
If no such chip is easily identifiable,
|
|
the implementor should identify the chip
|
|
which actually gathers the transmit
|
|
and receive statistics and error
|
|
indications. This would allow a
|
|
manager station to correlate the
|
|
statistics and the chip generating
|
|
them, giving it the ability to take
|
|
into account any known anomalies
|
|
in the chip."
|
|
::= { dot3StatsEntry 17 }
|
|
|
|
|
|
dot3StatsSymbolErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The number of times there was an invalid data
|
|
symbol when a valid carrier was present on a
|
|
particular interface.
|
|
|
|
The count represented by an instance of this
|
|
object is incremented at most once per carrier
|
|
event, even if multiple symbol errors occur
|
|
during the carrier event."
|
|
REFERENCE "IEEE 802.3u-1995 10 & 100 Mb/s Management"
|
|
::= { dot3StatsEntry 18 }
|
|
|
|
-- the Ethernet-like Collision Statistics group
|
|
|
|
-- Implementation of this group is optional; it is appropriate
|
|
-- for all systems which have the necessary metering
|
|
|
|
dot3CollTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF Dot3CollEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A collection of collision histograms for a
|
|
particular set of interfaces."
|
|
::= { dot3 5 }
|
|
|
|
dot3CollEntry OBJECT-TYPE
|
|
SYNTAX Dot3CollEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "A cell in the histogram of per-frame
|
|
collisions for a particular interface. An
|
|
instance of this object represents the
|
|
frequency of individual MAC frames for which
|
|
the transmission (successful or otherwise) on a
|
|
particular interface is accompanied by a
|
|
particular number of media collisions."
|
|
INDEX { ifIndex, dot3CollCount }
|
|
::= { dot3CollTable 1 }
|
|
|
|
Dot3CollEntry ::=
|
|
SEQUENCE {
|
|
dot3CollCount INTEGER,
|
|
dot3CollFrequencies Counter32
|
|
}
|
|
|
|
|
|
-- { dot3CollEntry 1 } is no longer in use
|
|
|
|
dot3CollCount OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The number of per-frame media collisions for
|
|
which a particular collision histogram cell
|
|
represents the frequency on a particular
|
|
interface."
|
|
::= { dot3CollEntry 2 }
|
|
|
|
dot3CollFrequencies OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A count of individual MAC frames for which the
|
|
transmission (successful or otherwise) on a
|
|
particular interface occurs after the
|
|
frame has experienced exactly the number
|
|
of collisions in the associated
|
|
dot3CollCount object.
|
|
|
|
For example, a frame which is transmitted
|
|
on interface 77 after experiencing
|
|
exactly 4 collisions would be indicated
|
|
by incrementing only dot3CollFrequencies.77.4.
|
|
No other instance of dot3CollFrequencies would
|
|
be incremented in this example."
|
|
::= { dot3CollEntry 3 }
|
|
|
|
-- 802.3 Tests
|
|
|
|
dot3Tests OBJECT IDENTIFIER ::= { dot3 6 }
|
|
|
|
dot3Errors OBJECT IDENTIFIER ::= { dot3 7 }
|
|
|
|
-- TDR Test
|
|
|
|
dot3TestTdr OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The Time-Domain Reflectometry (TDR) test is
|
|
specific to ethernet-like interfaces of type
|
|
10Base5 and 10Base2. The TDR value may be
|
|
useful in determining the approximate distance
|
|
to a cable fault. It is advisable to repeat
|
|
|
|
|
|
this test to check for a consistent resulting
|
|
TDR value, to verify that there is a fault.
|
|
|
|
A TDR test returns as its result the time
|
|
interval, measured in 10 MHz ticks or 100 nsec
|
|
units, between the start of TDR test
|
|
transmission and the subsequent detection of a
|
|
collision or deassertion of carrier. On
|
|
successful completion of a TDR test, the result
|
|
is stored as the value of an appropriate
|
|
instance of an appropriate vendor specific MIB
|
|
object, and the OBJECT IDENTIFIER of that
|
|
instance is stored in the appropriate instance
|
|
of the appropriate test result code object
|
|
(thereby indicating where the result has been
|
|
stored)."
|
|
::= { dot3Tests 1 }
|
|
|
|
-- Loopback Test
|
|
|
|
dot3TestLoopBack OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "This test configures the MAC chip and executes
|
|
an internal loopback test of memory, data paths,
|
|
and the MAC chip logic. This loopback test can
|
|
only be executed if the interface is offline.
|
|
Once the test has completed, the MAC chip should
|
|
be reinitialized for network operation, but it
|
|
should remain offline.
|
|
|
|
If an error occurs during a test, the
|
|
appropriate test result object will be set
|
|
to indicate a failure. The two OBJECT
|
|
IDENTIFIER values dot3ErrorInitError and
|
|
dot3ErrorLoopbackError may be used to provided
|
|
more information as values for an appropriate
|
|
test result code object."
|
|
::= { dot3Tests 2 }
|
|
|
|
dot3ErrorInitError OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "Couldn't initialize MAC chip for test."
|
|
::= { dot3Errors 1 }
|
|
|
|
dot3ErrorLoopbackError OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "Expected data not received (or not received
|
|
correctly) in loopback test."
|
|
|
|
|
|
::= { dot3Errors 2 }
|
|
|
|
-- 802.3 Hardware Chipsets
|
|
|
|
-- The object dot3StatsEtherChipSet is provided to
|
|
-- identify the MAC hardware used to communicate on an
|
|
-- interface. The following hardware chipsets are
|
|
-- registered:
|
|
|
|
dot3ChipSets OBJECT IDENTIFIER ::= { dot3 8 }
|
|
|
|
dot3ChipSetAMD OBJECT IDENTIFIER ::= { dot3ChipSets 1 }
|
|
|
|
dot3ChipSetAMD7990 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Advanced
|
|
Micro Devices Am7990 Local Area Network
|
|
Controller for Ethernet (LANCE)."
|
|
::= { dot3ChipSetAMD 1 }
|
|
|
|
dot3ChipSetAMD79900 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Advanced
|
|
Micro Devices Am79900 chip."
|
|
::= { dot3ChipSetAMD 2 }
|
|
|
|
dot3ChipSetAMD79C940 OBJECT-IDENTITY
|
|
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Advanced
|
|
Micro Devices Am79C940 Media Access Controller
|
|
for Ethernet (MACE)."
|
|
::= { dot3ChipSetAMD 3 }
|
|
|
|
dot3ChipSetAMD79C90 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Advanced
|
|
Micro Devices Am79C90 CMOS Local Area Network
|
|
Controller for Ethernet (C-LANCE)."
|
|
::= { dot3ChipSetAMD 4 }
|
|
|
|
dot3ChipSetAMD79C960 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Advanced
|
|
Micro Devices Am79C960 PCnet-ISA Single Chip
|
|
Ethernet Controller for ISA."
|
|
::= { dot3ChipSetAMD 5 }
|
|
|
|
|
|
dot3ChipSetAMD79C961 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Advanced
|
|
Micro Devices Am79C961 PCnet-ISA+ Single Chip
|
|
Plug & Play Full-Duplex Ethernet Controller
|
|
for ISA."
|
|
::= { dot3ChipSetAMD 6 }
|
|
|
|
dot3ChipSetAMD79C961A OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Advanced
|
|
Micro Devices Am79C961A PCnet-ISA II Single Chip
|
|
Plug & Play Full-Duplex Ethernet Controller
|
|
for ISA."
|
|
::= { dot3ChipSetAMD 7 }
|
|
|
|
dot3ChipSetAMD79C965 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Advanced
|
|
Micro Devices Am79C965 PCnet-32 Single Chip
|
|
Ethernet Controller for PCI."
|
|
::= { dot3ChipSetAMD 8 }
|
|
|
|
dot3ChipSetAMD79C970 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Advanced
|
|
Micro Devices Am79C970 PCnet PCI Single Chip
|
|
Ethernet Controller for PCI Local Bus."
|
|
|
|
::= { dot3ChipSetAMD 9 }
|
|
|
|
dot3ChipSetAMD79C970A OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Advanced
|
|
Micro Devices AM79C970A PCnet PCI II Single Chip
|
|
Full-Duplex Ethernet Controller for PCI Local
|
|
Bus."
|
|
::= { dot3ChipSetAMD 10 }
|
|
|
|
dot3ChipSetAMD79C971 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Advanced
|
|
Micro Devices Am79C971 PCnet-FAST Single Chip
|
|
Full-Duplex 10/100 Mbps Ethernet Controller for
|
|
PCI Local Bus."
|
|
::= { dot3ChipSetAMD 11 }
|
|
|
|
dot3ChipSetAMD79C972 OBJECT-IDENTITY
|
|
|
|
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Advanced
|
|
Micro Devices Am79C972 PCnet-FAST+ Enhanced
|
|
10/100 Mbps PCI Ethernet Controller with OnNow
|
|
Support."
|
|
::= { dot3ChipSetAMD 12 }
|
|
|
|
dot3ChipSetIntel OBJECT IDENTIFIER ::= { dot3ChipSets 2 }
|
|
|
|
dot3ChipSetIntel82586 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Intel
|
|
82586 IEEE 802.3 Ethernet LAN Coprocessor."
|
|
::= { dot3ChipSetIntel 1 }
|
|
|
|
dot3ChipSetIntel82596 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Intel
|
|
82596 High-Performance 32-Bit Local Area Network
|
|
Coprocessor."
|
|
::= { dot3ChipSetIntel 2 }
|
|
|
|
dot3ChipSetIntel82595 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Intel
|
|
82595 High Integration Ethernet Controller."
|
|
::= { dot3ChipSetIntel 3 }
|
|
|
|
dot3ChipSetIntel82557 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Intel
|
|
82557 Fast Ethernet PCI Bus Lan Controller."
|
|
::= { dot3ChipSetIntel 4 }
|
|
|
|
dot3ChipSetIntel82558 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Intel
|
|
82558 Fast Ethernet PCI Bus LAN Controller with
|
|
Integrated PHY."
|
|
::= { dot3ChipSetIntel 5 }
|
|
|
|
dot3ChipSetSeeq OBJECT IDENTIFIER ::= { dot3ChipSets 3 }
|
|
|
|
dot3ChipSetSeeq8003 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the SEEQ
|
|
8003 chip set."
|
|
::= { dot3ChipSetSeeq 1 }
|
|
|
|
|
|
dot3ChipSetSeeq80C03 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the SEEQ
|
|
80C03 Full-Duplex CMOS Ethernet Data Link
|
|
Controller (MAC)."
|
|
::= { dot3ChipSetSeeq 2 }
|
|
|
|
dot3ChipSetSeeq84C30 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the SEEQ
|
|
4-Port 84C30 Full-Duplex CMOS Ethernet 10
|
|
MBit/Sec Data Link Controller (MAC)."
|
|
::= { dot3ChipSetSeeq 3 }
|
|
|
|
dot3ChipSetSeeq8431 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the SEEQ
|
|
4-Port 8431 Full-Duplex CMOS Ethernet 10
|
|
MBit/Sec Data Link Controller (MAC)."
|
|
::= { dot3ChipSetSeeq 4 }
|
|
|
|
dot3ChipSetSeeq80C300 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the SEEQ
|
|
80C300 Full-Duplex CMOS Ethernet 10/100
|
|
Mbit/Sec Data Link Controller (MAC)."
|
|
::= { dot3ChipSetSeeq 5 }
|
|
|
|
dot3ChipSetSeeq84C300 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the SEEQ
|
|
4-Port 84C300 Fast Ethernet Controller (MAC)."
|
|
::= { dot3ChipSetSeeq 6 }
|
|
|
|
dot3ChipSetSeeq84301 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the SEEQ
|
|
4-Port 84301 Fast Ethernet Controller (MAC)."
|
|
::= { dot3ChipSetSeeq 7 }
|
|
|
|
dot3ChipSetSeeq84302 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the SEEQ
|
|
4-Port 84302 Fast Ethernet Controller (MAC)."
|
|
::= { dot3ChipSetSeeq 8 }
|
|
|
|
dot3ChipSetSeeq8100 OBJECT-IDENTITY
|
|
STATUS current
|
|
|
|
|
|
DESCRIPTION "The authoritative identifier for the SEEQ
|
|
8100 Gigabit Ethernet Controller (MAC & PCS)."
|
|
::= { dot3ChipSetSeeq 9 }
|
|
|
|
dot3ChipSetNational OBJECT IDENTIFIER ::= { dot3ChipSets 4 }
|
|
|
|
dot3ChipSetNational8390 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the National
|
|
Semiconductor DP8390 Network Interface
|
|
Controller."
|
|
::= { dot3ChipSetNational 1 }
|
|
|
|
dot3ChipSetNationalSonic OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the National
|
|
Semiconductor DP83932 Systems-Oriented Network
|
|
Interface Controller (SONIC)."
|
|
::= { dot3ChipSetNational 2 }
|
|
|
|
dot3ChipSetNational83901 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the National
|
|
Semiconductor DP83901 Serial Network Interface
|
|
Controller (SNIC)."
|
|
::= { dot3ChipSetNational 3 }
|
|
|
|
dot3ChipSetNational83902 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the National
|
|
Semiconductor DP83902 Serial Network Interface
|
|
Controller for Twisted Pair (ST-NIC)."
|
|
::= { dot3ChipSetNational 4 }
|
|
|
|
dot3ChipSetNational83905 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the National
|
|
Semiconductor DP83905 AT Local Area Network
|
|
Twisted-Pair Interface (AT/LANTIC)."
|
|
::= { dot3ChipSetNational 5 }
|
|
|
|
dot3ChipSetNational83907 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the National
|
|
Semiconductor DP83907 AT Twisted-Pair Enhanced
|
|
Coaxial Network Interface Controller
|
|
(AT/LANTIC II)."
|
|
::= { dot3ChipSetNational 6 }
|
|
|
|
|
|
dot3ChipSetNational83916 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the National
|
|
Semiconductor DP83916 Systems-Oriented Network
|
|
Interface Controller (SONIC-16)."
|
|
::= { dot3ChipSetNational 7 }
|
|
|
|
dot3ChipSetNational83934 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the National
|
|
Semiconductor DP83934 Systems-Oriented Network
|
|
Interface Controller with Twisted Pair Interface
|
|
(SONIC-T)."
|
|
::= { dot3ChipSetNational 8 }
|
|
|
|
dot3ChipSetNational83936 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the National
|
|
Semiconductor DP83936AVUL Full-Duplex Systems-
|
|
Oriented Network Interface Controller with
|
|
Twisted Pair Interface (SONIC-T)."
|
|
::= { dot3ChipSetNational 9 }
|
|
|
|
dot3ChipSetFujitsu OBJECT IDENTIFIER ::= { dot3ChipSets 5 }
|
|
|
|
dot3ChipSetFujitsu86950 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Fujitsu
|
|
86950 chip."
|
|
::= { dot3ChipSetFujitsu 1 }
|
|
|
|
dot3ChipSetFujitsu86960 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Fujitsu
|
|
MB86960 Network Interface Controller with
|
|
Encoder/Decoder (NICE)."
|
|
::= { dot3ChipSetFujitsu 2 }
|
|
|
|
dot3ChipSetFujitsu86964 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Fujitsu
|
|
MB86964 Ethernet Controller with 10BASE-T
|
|
Tranceiver."
|
|
::= { dot3ChipSetFujitsu 3 }
|
|
|
|
dot3ChipSetFujitsu86965A OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Fujitsu
|
|
|
|
|
|
MB86965A EtherCoupler Single-Chip Ethernet
|
|
Controller."
|
|
::= { dot3ChipSetFujitsu 4 }
|
|
|
|
dot3ChipSetFujitsu86965B OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Fujitsu
|
|
MB86965B EtherCoupler Single-Chip Ethernet
|
|
Controller (supports full-duplex)."
|
|
::= { dot3ChipSetFujitsu 5 }
|
|
|
|
dot3ChipSetDigital OBJECT IDENTIFIER ::= { dot3ChipSets 6 }
|
|
|
|
dot3ChipSetDigitalDC21040 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Digital
|
|
Semiconductor DC21040 chip."
|
|
::= { dot3ChipSetDigital 1 }
|
|
|
|
dot3ChipSetDigital21041 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Digital
|
|
Semiconductor 21041 PCI Ethernet LAN
|
|
Controller."
|
|
::= { dot3ChipSetDigital 2 }
|
|
|
|
dot3ChipSetDigital21140 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Digital
|
|
Semiconductor 21140 PCI Fast Ethernet LAN
|
|
Controller."
|
|
::= { dot3ChipSetDigital 3 }
|
|
|
|
dot3ChipSetDigital21143 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Digital
|
|
Semiconductor 21143 PCI/CardBus 10/100-Mb/s
|
|
Ethernet LAN Controller."
|
|
::= { dot3ChipSetDigital 4 }
|
|
|
|
dot3ChipSetDigital21340 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Digital
|
|
Semiconductor 21340 10/100-MB/s managed buffered
|
|
port switch."
|
|
::= { dot3ChipSetDigital 5 }
|
|
|
|
dot3ChipSetDigital21440 OBJECT-IDENTITY
|
|
|
|
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Digital
|
|
Semiconductor 21440 Multiport 10/100Mbps
|
|
Ethernet Controller."
|
|
::= { dot3ChipSetDigital 6 }
|
|
|
|
dot3ChipSetDigital21540 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Digital
|
|
Semiconductor 21540 PCI/CardBus Ethernet LAN
|
|
Controller with Modem Interface."
|
|
::= { dot3ChipSetDigital 7 }
|
|
|
|
dot3ChipSetTI OBJECT IDENTIFIER ::= { dot3ChipSets 7 }
|
|
|
|
dot3ChipSetTIE100 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Texas
|
|
Instruments TNETE100 ThunderLAN PCI Fast
|
|
Ethernet Controller."
|
|
::= { dot3ChipSetTI 1 }
|
|
|
|
dot3ChipSetTIE110 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Texas
|
|
Instruments TNETE110 ThunderLAN PCI 10BASE-T
|
|
Ethernet Adapter."
|
|
::= { dot3ChipSetTI 2 }
|
|
|
|
dot3ChipSetTIX3100 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Texas
|
|
Instruments TNETX3100 Desktop ThunderSWITCH
|
|
8/2."
|
|
::= { dot3ChipSetTI 3 }
|
|
|
|
dot3ChipSetTIX3150 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Texas
|
|
Instruments TNETX3150 ThunderSWITCH 12/3."
|
|
::= { dot3ChipSetTI 4 }
|
|
|
|
dot3ChipSetTIX3270 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Texas
|
|
Instruments TNETX3270 ThunderSWITCH 24/3."
|
|
::= { dot3ChipSetTI 5 }
|
|
|
|
|
|
dot3ChipSetToshiba OBJECT IDENTIFIER ::= { dot3ChipSets 8 }
|
|
|
|
dot3ChipSetToshibaTC35815F OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Toshiba
|
|
TC35815F PCI-Based 100/10Mbps Ethernet
|
|
Controller."
|
|
::= { dot3ChipSetToshiba 1 }
|
|
|
|
dot3ChipSetLucent OBJECT IDENTIFIER ::= { dot3ChipSets 9 }
|
|
|
|
dot3ChipSetLucentATT1MX10 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Lucent
|
|
Technologies ATT1MX10 (Spinnaker) Quad MAC and
|
|
Tranceiver for Ethernet Frame Switching."
|
|
::= { dot3ChipSetLucent 1 }
|
|
|
|
dot3ChipSetLucentLUC3M08 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Lucent
|
|
Technologies LUC3M08 Eight Ethernet MACs for
|
|
10/100 Mbits/s Frame Switching."
|
|
::= { dot3ChipSetLucent 2 }
|
|
|
|
dot3ChipSetGalileo OBJECT IDENTIFIER ::= { dot3ChipSets 10 }
|
|
|
|
dot3ChipSetGalileoGT48001 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Galileo
|
|
Technology GT-48001A Switched Ethernet
|
|
Controller."
|
|
::= { dot3ChipSetGalileo 1 }
|
|
|
|
dot3ChipSetGalileoGT48002 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Galileo
|
|
Technology GT-48002A Switched Fast Ethernet
|
|
Controller."
|
|
::= { dot3ChipSetGalileo 2 }
|
|
|
|
dot3ChipSetGalileoGT48004 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Galileo
|
|
Technology GT-48004A Four Port Fast Ethernet
|
|
Switch for Multiport 10/100BASE-X Systems."
|
|
::= { dot3ChipSetGalileo 3 }
|
|
|
|
|
|
dot3ChipSetGalileoGT48207 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Galileo
|
|
Technology GT-48207 Low-Cost 10 Port Switched
|
|
Ethernet Controller for 10+10/100BASE-X."
|
|
::= { dot3ChipSetGalileo 4 }
|
|
|
|
dot3ChipSetGalileoGT48208 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Galileo
|
|
Technology GT-48208 Advanced 10 Port Switched
|
|
Ethernet Controller for 10+10/100BASE-X."
|
|
::= { dot3ChipSetGalileo 5 }
|
|
|
|
dot3ChipSetGalileoGT48212 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Galileo
|
|
Technology GT-48212 Advanced 14 Port Switched
|
|
Ethernet Controller for 10+10/100BASE-X."
|
|
::= { dot3ChipSetGalileo 6 }
|
|
|
|
dot3ChipSetJato OBJECT IDENTIFIER ::= { dot3ChipSets 11 }
|
|
|
|
dot3ChipSetJatoJT1001 OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the Jato
|
|
Technologies JT1001 GigEMAC Server
|
|
10/100/1000Mbps Ethernet Controller with PCI
|
|
interface."
|
|
::= { dot3ChipSetJato 1 }
|
|
|
|
dot3ChipSetXaQti OBJECT IDENTIFIER ::= { dot3ChipSets 12 }
|
|
|
|
dot3ChipSetXaQtiXQ11800FP OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the XaQTI
|
|
XQ11800FP XMAC II Gigabit Ethernet Media Access
|
|
Controller."
|
|
::= { dot3ChipSetXaQti 1 }
|
|
|
|
dot3ChipSetXaQtiXQ18110FP OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION "The authoritative identifier for the XaQTI
|
|
XQ18110FP GigaPower Protocol Accelerator."
|
|
::= { dot3ChipSetXaQti 2 }
|
|
|
|
-- For those chipsets not represented above, OBJECT IDENTIFIER
|
|
-- assignment is required in other documentation, e.g.,
|
|
|
|
|
|
-- assignment within that part of the registration tree
|
|
-- delegated to individual enterprises (see RFC 1155 and
|
|
-- RFC 1902).
|
|
--
|
|
-- In the future, management of chipset registrations may be
|
|
-- delegated to the Internet Assigned Numbers Authority (IANA).
|
|
|
|
-- conformance information
|
|
|
|
etherConformance OBJECT IDENTIFIER ::= { etherMIB 2 }
|
|
|
|
etherGroups OBJECT IDENTIFIER ::= { etherConformance 1 }
|
|
etherCompliances OBJECT IDENTIFIER ::= { etherConformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
etherCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "The compliance statement for managed network
|
|
entities which have ethernet-like network
|
|
interfaces."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { etherStatsGroup }
|
|
|
|
GROUP etherCollisionTableGroup
|
|
DESCRIPTION "This group is optional. It is appropriate
|
|
for all systems which have the necessary
|
|
metering. Implementation in such systems is
|
|
highly recommended."
|
|
::= { etherCompliances 1 }
|
|
|
|
ether100MbsCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION "The compliance statement for managed network
|
|
entities which have 100 Mb/sec ethernet-like
|
|
network interfaces."
|
|
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { etherStats100MbsGroup }
|
|
|
|
GROUP etherCollisionTableGroup
|
|
DESCRIPTION "This group is optional. It is appropriate
|
|
for all systems which have the necessary
|
|
metering. Implementation in such systems is
|
|
highly recommended."
|
|
::= { etherCompliances 2 }
|
|
|
|
|
|
-- units of conformance
|
|
|
|
etherStatsGroup OBJECT-GROUP
|
|
OBJECTS { dot3StatsIndex,
|
|
dot3StatsAlignmentErrors,
|
|
dot3StatsFCSErrors,
|
|
dot3StatsSingleCollisionFrames,
|
|
dot3StatsMultipleCollisionFrames,
|
|
dot3StatsSQETestErrors,
|
|
dot3StatsDeferredTransmissions,
|
|
dot3StatsLateCollisions,
|
|
dot3StatsExcessiveCollisions,
|
|
dot3StatsInternalMacTransmitErrors,
|
|
dot3StatsCarrierSenseErrors,
|
|
dot3StatsFrameTooLongs,
|
|
dot3StatsInternalMacReceiveErrors,
|
|
dot3StatsEtherChipSet
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A collection of objects providing information
|
|
applicable to all ethernet-like network
|
|
interfaces."
|
|
::= { etherGroups 1 }
|
|
|
|
etherCollisionTableGroup OBJECT-GROUP
|
|
OBJECTS { dot3CollFrequencies
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A collection of objects providing a histogram
|
|
of packets successfully transmitted after
|
|
experiencing exactly N collisions."
|
|
::= { etherGroups 2 }
|
|
|
|
etherStats100MbsGroup OBJECT-GROUP
|
|
OBJECTS { dot3StatsIndex,
|
|
dot3StatsAlignmentErrors,
|
|
dot3StatsFCSErrors,
|
|
dot3StatsSingleCollisionFrames,
|
|
dot3StatsMultipleCollisionFrames,
|
|
dot3StatsDeferredTransmissions,
|
|
dot3StatsLateCollisions,
|
|
dot3StatsExcessiveCollisions,
|
|
dot3StatsInternalMacTransmitErrors,
|
|
dot3StatsCarrierSenseErrors,
|
|
dot3StatsFrameTooLongs,
|
|
dot3StatsInternalMacReceiveErrors,
|
|
|
|
|
|
dot3StatsEtherChipSet,
|
|
dot3StatsSymbolErrors
|
|
}
|
|
STATUS current
|
|
DESCRIPTION "A collection of objects providing information
|
|
applicable to 100 Mb/sec ethernet-like network
|
|
interfaces."
|
|
::= { etherGroups 3 }
|
|
|
|
END
|