mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
Files
47c22f6bb06f64752a5e1a82f22d0de9fdc2777c
librenms-librenms/mibs/ICF-ETWIST
Adam Amstrong a4ef7f5506 move more mibs to route (hp and allied telesis/syn) 
git-svn-id: http://www.observium.org/svn/observer/trunk@1577 61d68cd4-352d-0410-923a-c4978735b2b8
2010-07-31 16:56:02 +00:00

4701 lines
193 KiB
Plaintext
Raw Blame History

ICF-ETWIST DEFINITIONS ::= BEGIN
IMPORTS
IpAddress, Integer32, Counter32, TimeTicks,
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
DisplayString, MacAddress
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
ifAdminStatus
FROM IF-MIB
rptrPortAdminStatus, rptrAddrTrackLastSourceAddress
FROM SNMP-REPEATER-MIB -- 802.3 Repeater MIB
hubIntruderAddress, hubIntruderPort
FROM HP-ICF-GENERIC-RPTR
icfCommon, icfHub, icfBridge, icfConfig,
bridge1010, bridgeRemote, etherTwist12, etherTwist48,
etherTwist24S, fiberOptic, thinLAN, advStack12, advStack24,
advStack48, advStackU8, advStackU16, repeaterAgent,
hpicfEnetSMM
FROM HP-ICF-OID;
icfEtwistMib MODULE-IDENTITY
LAST-UPDATED "200011032220Z" -- November 3, 2000
ORGANIZATION "Hewlett Packard Company,
Network Infrastructure Solutions"
CONTACT-INFO
"Hewlett Packard Company
8000 Foothills Blvd.
Roseville, CA 95747"
DESCRIPTION
"This MIB module describes devices in the HP
Integrated Communication Facility product
line."
REVISION "200011032220Z" -- November 3, 2000
DESCRIPTION "Updated division name. Changed most of the
remaining objects to obsolete."
REVISION "9609060258Z" -- September 6, 1996
DESCRIPTION
"Split this MIB module from the former monolithic
hp-icf MIB. Obsoleted most of the objects in
this module."
REVISION "9402250000Z" -- February 25, 1994
DESCRIPTION
"Version of MIB module that provided support for
the first release AdvanceStack hubs, HPJ2600A,
HPJ2601A and HPJ2602A and agent module HPJ2603A.
Released with agent for HPJ2603A version A.01.00.
This version obsoleted the objects in the
icfDownloadGroup, and deprecated most of the
other objects in this module. It also added
support for the late event monitor capability."
REVISION "9307090000Z" -- July 9, 1993
DESCRIPTION
"Version of MIB module that provided support for
the EtherTwist Secure Hub, HPJ2355A. Released
with HPJ2355A version E.01.02. This version
obsoleted the objects in the icfEncryptedPassword
group. It added support for the hub polarity
reversed detection capability, the address
movement log, and the icfConfig group, as well as
the address movement and new address traps."
REVISION "9204160000Z" -- April 16, 1992
DESCRIPTION
"Version of MIB module that provided support for
the HP ThinLAN Hub, HP28692A. Released with
agent version D.01.05 for the HP28682A, HP28688B,
HP28692A, and HP28699A, agent versions D.01.00 (IP)
and D.02.00 (IPX) for the HP28688A, and agent
version D.01.02 for the HP28673A and HP28674A.
This version of the MIB added IPX and network
download support. It also added the hub address
table, backup links, and SQE detect."
REVISION "9104240000Z" -- April 24, 1991
DESCRIPTION
"Initial version of this MIB module. Released
with the HP28688B 12 Port EtherTwist Hub Plus,
the HP28699A 48 Port EtherTwist Hub Plus, the
HP28682A Fiber Optic Hub, the HP28673A 10:10
Bridge, and the HP28674A Remote Bridge.
Initially released with agent version C.01.01
for the HP28682A, HP28688B, and HP28699A, agent
version C.01.02 for the HP28688A, and agent
version C.01.00 for the HP28673A and HP28674A."
::= { icfCommonAdmin 1 }
icfCommonAdmin OBJECT IDENTIFIER ::= { icfCommon 11 }
icfETwistConformance OBJECT IDENTIFIER ::= { icfCommonAdmin 2 }
-- Note: Uncomment the following lines, remove the imports
-- from HP-ICF-OID, and and an import of enterprises from
-- SNMPv2-SMI, if this is not used in conjunction with the
-- hpicfOid MIB.
--
-- hp OBJECT IDENTIFIER ::= { enterprises 11 }
-- nm OBJECT IDENTIFIER ::= { hp 2 }
-- icf OBJECT IDENTIFIER ::= { nm 14 }
-- icfCommon OBJECT IDENTIFIER ::= { icf 1 }
-- icfHub OBJECT IDENTIFIER ::= { icf 2 }
-- icfBridge OBJECT IDENTIFIER ::= { icf 3 }
-- icfConfig OBJECT IDENTIFIER ::= { icf 5 }
--
-- system OBJECT IDENTIFIER ::= { nm 3 }
-- netElement OBJECT IDENTIFIER ::= { system 7 }
-- bridge OBJECT IDENTIFIER ::= { netElement 1 }
-- hub OBJECT IDENTIFIER ::= { netElement 5 }
-- chassis OBJECT IDENTIFIER ::= { netElement 8 }
--
-- bridge1010 OBJECT IDENTIFIER ::= { bridge 1 }
-- bridgeRemote OBJECT IDENTIFIER ::= { bridge 2 }
--
-- etherTwist12 OBJECT IDENTIFIER ::= { hub 1 }
-- fiberOptic OBJECT IDENTIFIER ::= { hub 3 }
-- etherTwist48 OBJECT IDENTIFIER ::= { hub 4 }
-- thinLAN OBJECT IDENTIFIER ::= { hub 5 }
-- etherTwist24S OBJECT IDENTIFIER ::= { hub 6 }
-- advStack12 OBJECT IDENTIFIER ::= { hub 7 }
-- advStack24 OBJECT IDENTIFIER ::= { hub 8 }
-- advStack48 OBJECT IDENTIFIER ::= { hub 9 }
-- advStackU8 OBJECT IDENTIFIER ::= { hub 11 }
-- advStackU16 OBJECT IDENTIFIER ::= { hub 12 }
--
-- repeaterAgent OBJECT IDENTIFIER ::= { chassis 1 }
-- chassisAgents OBJECT IDENTIFIER ::= { chassis 2 }
-- hpicfEnetSMM OBJECT IDENTIFIER ::= { chassisAgents 4 }
-- IcfCommon group
lastSetError OBJECT-TYPE
SYNTAX INTEGER {
unexpectedError(100),
-- Couldn't get a packet buffer
resourceLimitExceeded(101),
-- See stpPortState
disallowedSTPPortState(102),
-- For Super objects
incompleteSetlet(103),
-- See evtObject
invalidEventObject(104),
disallowedRemoteDevice(105),
-- Local must not equal remote
disallowedLAPBAdrsPair(106),
-- addressChunk
adrsAlreadyPresent(107),
-- addressChunk
staticSectionFull(108),
-- addressChunk
cantDeletePermAdrs(109),
inconsistentValues(110),
downloadInProgress(111)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Provide more detailed, enterprise specific error
type. Any error resulting from a SET request will
cause this object to be updated, and the previous
value overwritten. A management entity may
retrieve more detailed error information than that
implied by the pdu's ErrorStatus, especially in
the case of a genErr."
::= { icfCommon 1 }
password OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This is the encrypted password for the device. The
algorithm used for the encryption process is HP
proprietary. Third party vendor support is provided
by not setting a password on the device, and using
the community name 'public'."
::= { icfCommon 2 }
reset OBJECT-TYPE
SYNTAX Integer32 --INTEGER {
-- noReset(0),
-- warm(1),
-- cold(2)
--}
MAX-ACCESS read-write -- write-only on EtherTwist 'D' rev
-- and earlier
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
When the reset object is set to to 'warm' it
results in a 'warm' reset, which does not clear
the parameters in NOVRAM to factory defaults. When
set to 'cold', it results in NOVRAM being set to
factory defaults. When this object is set, the
agent replies, dallies a short time to allow the
reply to be emitted from the device, then performs
the reset. When read, this object always returns
0."
::= { icfCommon 3 }
selfTest OBJECT-TYPE
SYNTAX Integer32 --INTEGER {
-- stSuccess(0),
-- stExecute(1)
--}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Self test is invoked by setting this flag to
'stExecute. When the object changes to
'stSuccess', the test has completed successfully.
Icf devices will 'hard-fail' if the test does not
succeed."
::= { icfCommon 4 }
semaphore OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This object allows a set of objects to be locked.
The lock is only assured by the 'cooperation' of
other management entities; they must wait until
the lock is cleared (to value zero) prior to
setting the lock. When this object is set to a
management entity's IP address, if no other
management entity has previously set the lock, the
set will succeed. Otherwise, an error (BadValue)
will be returned. It is the responsibility of the
owning management entity to clear the lock when
the transactions complete. To protect against a
management entity failure during a locked
transaction, the agent is NOT responsible for
verifying which management entity is performing
transactions on locked objects; thus, any
management entity can clear this object at any
time. The agent does not do anything with this
object except disallow multiple sets of different
IP addresses (unless the object has been cleared
to zero). This means management entities can use
this for locking any valid transactions on defined
sets of objects. This object can also be used on
IPX networks by specifying the low 4 bytes of the
station address for the IpAddress."
-- INDEX { INTEGER (1..3)
-- pollResponse(1), - lock pollResponse object
-- mapObjects(2), - lock mapAddress,
-- mapState, and mapPort
-- eventGroup(3) - lock all objects in
-- event group
-- }
::= { icfCommon 5 }
-- Discovery Group
discovery OBJECT IDENTIFIER ::= { icfCommon 6 }
pollResponse OBJECT-TYPE
SYNTAX Integer32 -- INTEGER {
-- false(0),
-- true(1)
--}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Flag indicating whether device should respond to
multicast SNMP PDUs. When set 'true', the device
will respond to multicast SNMP PDU's. Otherwise,
the response is discarded."
::= { discovery 1 }
announceAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
When set to any MAC address, the device will
transmit three identical packets, each with the MAC
source set to the device's MAC address, the MAC
destination to the value of this object, the
destination SAP is F8, and the destination HP XSAP
is 165D. These packets will traverse other ICF
devices, allowing them to learn the port connectivity
of the transmitting device."
::= { discovery 2 }
mapAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
When this object is set a map address search
begins. If the address is detected on only one
port, then the mapPort object is set to the port
number on which the address was detected.
This object is obsolete. This functionality has
now been incorporated into the IETF 802.3 Repeater
MIB. Agents and management applications should
implement that MIB."
::= { discovery 3 }
mapState OBJECT-TYPE
SYNTAX Integer32 -- INTEGER {
-- psNone(0),
-- psSingle(1),
-- psMany(2)
--}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This object will be set to 'psNone' if the
address set in the mapAddress object has not been
received on any of the device's interface/ports.
It will be set to 'psSingle' if the mapAddress has
been detected on only one interface/port. It will
be set to 'psMany' if the mapAddress has been
detected on more than one interface/port.
This object is obsolete. This functionality has
now been incorporated into the IETF 802.3 Repeater
MIB. Agents and management applications should
implement that MIB."
::= { discovery 4 }
mapPort OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The port number on which the map address was
detected. If map state is 'psNone' or 'psMany'
then this object is not valid.
This object is obsolete. This functionality has
now been incorporated into the IETF 802.3 Repeater
MIB. Agents and management applications should
implement that MIB."
::= { discovery 5 }
ipSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This object is the IP subnet mask."
::= { discovery 6 }
-- Event Group
icfEvent OBJECT IDENTIFIER ::= { icfCommon 7 }
eventNotificationNode OBJECT IDENTIFIER ::= { icfEvent 1 }
evtIpNotify OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The network address of the manager node which is
to receive the event notification trap."
::= { eventNotificationNode 1 }
evtIpxNotify OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (10))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The IPX address of the manager node which is to
receive the event notification trap."
::= { eventNotificationNode 2 }
evtTable OBJECT-TYPE
SYNTAX SEQUENCE OF EvtEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
A list of event entries for event processing."
--INDEX { evtIndex }
::= { icfEvent 2 }
EvtEntry ::=
SEQUENCE {
evtIndex INTEGER,
evtArm Integer32,
evtTimeSinceOccurrence TimeTicks
}
evtIndex OBJECT-TYPE
SYNTAX INTEGER {
warmStartEvent(1),
coldStartEvent(2),
spanTreeOrLinkBeatEvent(3),
temperatureOrSegmentationEvent(4),
backupLinkEvent(5), -- hubs only
-- The following are supported only on
-- rev 'E' EtherTwist hubs or later and
-- AdvanceStack 10Mbit hubs
intrusionEvent(6),
addressMovedEvent(7),
newAddressEvent(8),
rptrHealthEvent(9),
rptrResetEvent(10)
-- spanTreeEvent(3), - bridges only
-- temperatureEvent(4), - bridges only
-- linkBeatEvent(3), - hubs only
-- segmentationEvent(4) - hubs only
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
event to which this entry is applicable."
::= { evtTable 1 }
evtArm OBJECT-TYPE
SYNTAX Integer32 -- INTEGER {
-- off(0),
-- on(1)
--}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This object arms and disarms events. Events are
implicitly rearmed, that is, once an event occurs,
it is rearmed. Sets to the intrusionEvent
instance of this object are ignored, since
intrusion events are actually armed through the
hubSecPtAlarmEnable object."
::= { evtTable 2 }
evtTimeSinceOccurrence OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This object specifies the number of centiseconds
since this event last occurred."
::= { evtTable 3 }
evtThresholdTable OBJECT-TYPE
SYNTAX SEQUENCE OF EvtThresholdEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
A list of event entries for event processing."
--INDEX { evthIndex }
::= { icfEvent 3 }
EvtThresholdEntry ::=
SEQUENCE {
evthIndex Integer32,
evthArm Integer32,
evthObject OBJECT IDENTIFIER,
evthThreshold Integer32,
evthHysteresis Integer32,
evthTimeInterval TimeTicks,
evthTimeSinceOccurrence TimeTicks
}
evthIndex OBJECT-TYPE
SYNTAX Integer32 ( 1..5 )
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
event to which this entry is applicable."
::= { evtThresholdTable 1 }
evthArm OBJECT-TYPE
SYNTAX Integer32 -- INTEGER {
-- off(0),
-- on(1)
--}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This object arms and disarms events. The
notification node, the associated event object,
threshold, hysteresis, and time interval should
all be set before an event is armed. The objects
do not need to be re-set if the existing values
are acceptable. The device will refuse to arm an
event with uninitialized objects. Once armed, if
the threshold is met or exceeded during the event
time interval, a trap PDU is sent to the
eventNotificationNode. Subsequently, the
monitored object must fall to or below the
hysteresis before another trap can be sent via the
threshold mechanism. The hysteresis may equal
threshold. Events are implicitly rearmed, that is,
once an event occurs, it is rearmed. Setting this
object to 'on' will result in a genErr in any of
the following cases: object not set; cannot set an
event on this object; time interval not set;
threshold not set."
::= { evtThresholdTable 2 }
evthObject OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The data of this object is itself an OBJECT
IDENTIFIER which selects the mib object and
instance that is to be monitored for the event.
Only types INTEGER and Counter are allowed."
::= { evtThresholdTable 3 }
evthThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The threshold against which the variable
specified in evthObject is tested over the time
interval specified in the evthTimeInterval When
the threshold is met or exceeded, the event is
triggered. The event will not trigger again until
the variable falls to or below the evthHysteresis
value, and then meets or exceeds the threshold."
::= { evtThresholdTable 4 }
evthHysteresis OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The low value which the variable specified in
evthObject must fall to or below after exceeding
evthThreshold before the event can re-occur when
the threshold is met or exceeded."
::= { evtThresholdTable 5 }
evthTimeInterval OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The time interval over which the variable
specified in the evthObject is sampled."
::= { evtThresholdTable 6 }
evthTimeSinceOccurrence OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This object specifies the number of centiseconds
since this event was last triggered."
::= { evtThresholdTable 7 }
-- Link Test Group
linkTest OBJECT IDENTIFIER ::= { icfCommon 8 }
linkTestAddress OBJECT IDENTIFIER ::= { linkTest 1 }
linkTest802MacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
If this object is set to the MAC address of a
node to link test in the same PDU that sets
linkTestRepetitions to a nonzero value, the link
test performed will use IEEE 802 Test frames.
Note that setting more than one of
linkTest802MacAddress, linkTestIpAddress, and
linkTestIpxAddress to a non-null value in the same
PDU will result in a genErr.
This object is now obsolete. Is functionality
is being replaced by the hpicfLinktest objects."
::= { linkTestAddress 1 }
linkTestIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
If this object is set to the network address of a
node to link test in the same PDU that sets
linkTestRepetitions to a nonzero value, the link
test performed will use ICMP Echo packets.
Note that setting more than one of
linkTest802MacAddress, linkTestIpAddress, and
linkTestIpxAddress to a non-null value in the same
PDU will result in a genErr.
This object is now obsolete. Is functionality
is being replaced by the hpicfLinktest objects."
::= { linkTestAddress 2 }
linkTestIpxAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (10))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
If this object is set to the IPX address of a
node to link test in the same PDU that sets
linkTestRepetitions to a nonzero value, the link
test performed will use IPX diagnostic packets.
Note that setting more than one of
linkTest802MacAddress, linkTestIpAddress, and
linkTestIpxAddress to a non-null value in the same
PDU will result in a genErr.
This object is now obsolete. Is functionality
is being replaced by the hpicfLinktest objects."
::= { linkTestAddress 3 }
linkTestRepetitions OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The number of link tests that the device is to
complete. When this object is set to a non-zero
value, the linkTestSuccess object is zeroed and
the device begins a link test using IEEE 802.2
Test frames, ICMP Echo packets, or IPX diagnostic
packets depending on the address selected. Link
test results are contained in the link test
success object. This object's value decrements
(to zero) as the test proceeds. The test may be
canceled at any point by setting this object to
0.
This object is now obsolete. Is functionality
is being replaced by the hpicfLinktest objects."
::= { linkTest 2 }
linkTestSuccess OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
For every successful link test, this counter is
incremented. When link tests are completed, this
counter contains the total number of successful
tests.
This object is now obsolete. Is functionality
is being replaced by the hpicfLinktest objects."
::= { linkTest 3 }
linkTestTimeout OBJECT-TYPE
SYNTAX TimeTicks --(10..300000000)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The time interval over which a link test response
must be received, or the test is counted as
failed.
This object is now obsolete. Is functionality
is being replaced by the hpicfLinktest objects."
::= { linkTest 4 }
-- Icf 802.3 Mac Group.
icf8023MacTable OBJECT-TYPE
SYNTAX SEQUENCE OF Icf8023MacEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
A list of icf8023Mac entries."
--INDEX { icf8023MacIndex }
::= { icfCommon 9 }
Icf8023MacEntry ::=
SEQUENCE {
icf8023MacIndex Integer32,
icf8023MacInBroadcastPkts Counter32,
icf8023MacOutBroadcastPkts Counter32,
icf8023MacInMulticastPkts Counter32,
icf8023MacOutMulticastPkts Counter32,
icf8023MacRunts Counter32,
icf8023MacGiants Counter32,
icf8023MacMissedPktErrors Counter32,
icf8023MacExcessDeferrals Counter32,
icf8023MacTotalMediaErrors Counter32,
icf8023MacSpuriousIntrs Counter32
}
icf8023MacIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
port to which this entry is applicable. The port
identified by a particular value of this index on
a hub is the same port as identified by the same
value of rptrPortIndex. Note that since this hub
always has exactly 1 port group, there is no group
index for this table. For a bridge, the port
identified by a particular value of this index is
the same port identified by the same value of
ifIndex."
::= { icf8023MacTable 1 }
icf8023MacInBroadcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of the broadcast packets received."
::= { icf8023MacTable 2 }
icf8023MacOutBroadcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of the broadcast packets transmitted."
::= { icf8023MacTable 3 }
icf8023MacInMulticastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of the multicast packets received."
::= { icf8023MacTable 4 }
icf8023MacOutMulticastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of the multicast packets transmitted."
::= { icf8023MacTable 5 }
icf8023MacRunts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The number of media frames encountered that were
too short (by ethernet/802.3 standards)."
::= { icf8023MacTable 6 }
icf8023MacGiants OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The number of media frames encountered that were
too long (by ethernet/802.3 standards)."
::= { icf8023MacTable 7 }
icf8023MacMissedPktErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The number of frames lost due to lack of
resources (e.g. ring buffers, memory buffers,
etc)."
::= { icf8023MacTable 8 }
icf8023MacExcessDeferrals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The number of times a frame could not be sent due
to excess deferrals because another node was
transmitting continually."
::= { icf8023MacTable 9 }
icf8023MacTotalMediaErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of all possible medium transmit and receive
errors, such as crc, alignment, sequence, length,
excess etc. The purpose of this object is to
support aggregate LAN medium errors for event
processing. Collisions and runts are not
considered an error."
::= { icf8023MacTable 10 }
icf8023MacSpuriousIntrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The number of times that the network interface
for this port generated a spurious hardware
interrupt. A non-zero value for this object
indicates a potential hardware problem."
::= { icf8023MacTable 11 }
-- IcfDownload Group
--
-- The icfDownload objects are provided to download a new
-- version of firmware into the device. The tftp protocol is
-- used for the download. To initiate a download, the
-- management station must set icfDownloadIp[x]Address to the
-- address of a tftp server and the management station must
-- also set icfDownloadFilename to the path name of the file
-- containing the new revision of firmware. The address and
-- filename must both be set in the same PDU.
--
-- Note that this group is now obsolete, and has been replaced
-- by the hpicfDownload group. It is not supported in any
-- AdvanceStack products.
icfDownload OBJECT IDENTIFIER ::= { icfCommon 10 }
icfDownloadAddress OBJECT IDENTIFIER ::= { icfDownload 1 }
icfDownloadIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The IP address of the TFTP server to download
firmware from."
::= { icfDownloadAddress 1 }
icfDownloadIpxAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (10))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The IPX address of the TFTP server to download
firmware from."
::= { icfDownloadAddress 2 }
icfDownloadFilename OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Filename and path of file to download (maximum
length of 63 characters + NULL)."
::= { icfDownload 2 }
--
-- Icf Hub Group
--
-- This group is implemented on both EtherTwist and AdvanceStack
-- 10MBit hubs.
--
hubThinlanFault OBJECT-TYPE
SYNTAX Integer32 -- INTEGER {
-- false(0),
-- true(1)
--}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
When set to 'true' this object causes the Fault
LED to blink if the ThinLan Port is segmented."
::= { icfHub 1 }
-- Note: The hubGlobal counters that are composed of other
-- objects are provided to allow for event testing on global
-- error conditions.
hubGlobal OBJECT IDENTIFIER ::= { icfHub 2 }
hubGlobalErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This counter is incremented for each packet with
an error received on any port. This counter does
not include runts, as they are a normal media
condition."
::= { hubGlobal 1 }
hubGlobalCollisions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This counter is incremented for each collision
between any two or more ports (or AUI) detected by
the hub."
::= { hubGlobal 2 }
hubGlobalPktFragments OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This counter is the sum of hubPortPktFragments
for all ports."
::= { hubGlobal 3 }
hubGlobalRunts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This counter is incremented for each runt frame
received on any port."
::= { hubGlobal 4 }
hubGlobalGiants OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This counter is incremented for each giant frame
received on any port."
::= { hubGlobal 5 }
hubGlobalCrcErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This counter is incremented for each frame with a
CRC error received on any port."
::= { hubGlobal 6 }
hubGlobalAlignmentErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This counter is incremented for each frame with
an alignment error received on any port."
::= { hubGlobal 7 }
hubGlobalInOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This counter is incremented for each octet
received on any port."
::= { hubGlobal 8 }
hubGlobalInUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This counter is incremented for each unicast
packet received on any port."
::= { hubGlobal 9 }
hubGlobalInNUcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This counter is incremented for each non-unicast
packet received on any port."
::= { hubGlobal 10 }
hubGlobalInBroadcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This counter is incremented for each broadcast
packet received on any port."
::= { hubGlobal 11 }
-- Icf Hub Port Table
hubPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HubPortEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
A list of hubPort entries."
--INDEX { hubPortIndex }
::= { icfHub 3 }
HubPortEntry ::=
SEQUENCE {
hubPortIndex Integer32,
hubPortPktFragments Counter32,
hubPortCollisions Counter32,
hubPortSegmentation Integer32,
hubPortLinkBeatStatus Integer32,
hubPortLinkBeatEnable Integer32,
hubPortMacAddress MacAddress,
hubPortAddressState Integer32,
hubPortPolarityReversed Integer32,
hubPortLateEventDisable INTEGER
}
hubPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
port to which this entry is applicable. The port
identified by a particular value of this index is
the same port as identified by the same value of
rptrPortIndex."
::= { hubPortTable 1 }
hubPortPktFragments OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This counter is incremented when a packet or
packet fragment is encountered for a port
instance."
::= { hubPortTable 2 }
hubPortCollisions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This counter is incremented when a port is
involved in a collision."
::= { hubPortTable 3 }
hubPortSegmentation OBJECT-TYPE
SYNTAX Integer32 -- INTEGER {
-- false(0),
-- true(1)
--}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This is a flag which is 'true' if the port is
currently segmented and 'false' otherwise."
::= { hubPortTable 4 }
hubPortLinkBeatStatus OBJECT-TYPE
SYNTAX Integer32 -- INTEGER {
-- false(0),
-- true(1)
--}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This is a flag which is 'true' if link beat is
detected on the port and 'false' otherwise. The
value of this variable will always be 'true' when
the corresponding instance of
hubPortLinkBeatEnable is 'false'."
::= { hubPortTable 5 }
hubPortLinkBeatEnable OBJECT-TYPE
SYNTAX Integer32 -- INTEGER {
-- false(0),
-- true(1)
--}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
When this flag is set to 'true' the port's link
beat is enabled and when set to 'false' it is
disabled."
::= { hubPortTable 6 }
hubPortMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Each port maintains the MAC address of the node
currently attached to it. This address is valid
only when the port state flag is set to
'psSingle'."
::= { hubPortTable 7 }
hubPortAddressState OBJECT-TYPE
SYNTAX Integer32 -- INTEGER {
-- psNone(0),
-- psSingle(1),
-- psMany(2)
--}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The port state object may take on three values.
'psNone' means no packets have been received on
the port. 'psSingle' means all packets received on
the port have originated from a single MAC
address. 'psMany' means that packets originating
from more than one node have been received on the
port. To (re)start a search for a MAC address set
the port state to 'psNone'."
::= { hubPortTable 8 }
hubPortPolarityReversed OBJECT-TYPE
SYNTAX Integer32 -- INTEGER {
-- false(0),
-- true(1)
--}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This object is used to indicate that the hub port
was wired with the positive/negative polarity of
its transmit and receive pairs reversed. Note
that the port will continue to operate in this
state, with the hub inverting the polarity
internally."
::= { hubPortTable 9 }
hubPortLateEventDisable OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This object indicates that the hub port was
disabled as a result of excessive late collisions
being caused by the end node attached to this
port. This flag is cleared when the port is
reenabled by setting rptrPortAdminStatus to
'enabled'."
::= { hubPortTable 10 }
hubBitmaps OBJECT IDENTIFIER ::= { icfHub 4 }
hubPortsOperStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..128))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The hubPortsOperStatus is a bit map of the state
of all hub ports. The object has a 1 bit for each
port that is enabled, not segmented, and linkbeat
is detected. Ports on which these conditions are
not true have a 0 bit. The bits are placed into
the OCTET STRING in the following order:
octet 0 octet 1 octet 2 ...
bits 7-0 bits 7-0 bits 7-0 ...
ports 1-8 ports 9-16 ports 17-24 ...
Values of unused bits in the last octet are
undefined."
::= { hubBitmaps 1 }
hubAddressTableMaxAge OBJECT-TYPE
SYNTAX TimeTicks --(60000..65535000)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The hubAddressTableMaxAge is the time beyond
which an inactive MAC address will be removed from
the hubPortMacAddress table and the
hubAddressTable. Although hubAddressTableMaxAge
is specified in units of 10ms time ticks, the
actual resolution of this timer is 10 seconds. A
value of 65535000 indicates no aging shall take
place."
::= { icfHub 5 }
hubAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF HubAddressEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
A list of entries present in the hub address
table."
--INDEX { hubAddressIndex }
::= { icfHub 6 }
HubAddressEntry ::=
SEQUENCE {
hubAddressIndex Integer32,
hubAddressChunk OCTET STRING
}
hubAddressIndex OBJECT-TYPE
SYNTAX Integer32 (1..52)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
chunk to which this entry is applicable."
::= { hubAddressTable 1 }
hubAddressChunk OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (408))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The hubAddressChunk object returns an opaque
chunk of the address table. Each chunk can be
interpreted as an array of records in the form:
mac address [6 bytes], port number [2 bytes],
inactivity time [4 bytes]
On a Get, the returned chunk can include empty
(unused) entries. Instances are chunk numbers,
which start at 1 and go to 52. Each chunk can
hold 34 addresses.
A returned chunk might look like:
Address Port Inactivity Time
080009001234 1 0
080009002345 2 10000
080009003456 1 20000
000000000000 1 0
080009009876 EMPTY 0
080009004567 EMPTY 15000
.
.
.
080009005678 EOL 959000
A value of EMPTY in the Port field indicates an
unused (i.e. aged out) entry in the table. When
the EOL (End Of List) bit is set in the Port
field, that entry is the last entry in the table.
It is possible for EOL to be seen in any entry.
EOL (0x4000) and EMPTY (0x8000) are bit masks
which are ORed with the port number in the port
field of the entry. It is possible for both the
EOL and EMPTY bits to be set in the same entry.
The remainder of the chunk after the EOL entry
will be zeroed.
The inactivityTime and Address fields are
meaningless if the EMPTY bit is set in the Port
field. In this case, inactivityTime and Address
are not guaranteed to be zeroed. The Manager may
start with any chunk it likes and request the
chunks in any order. It may perform multiple
requests for the same chunk. The agent does not
save state from previous requests.
A request of chunk #1 would return the contents of
the first 34 address table entries, whether they
are all full, all empty, or some full and the rest
empty. A request of chunk #2 will return entries
#35 through #68. And so on.
The address table can change between Get requests.
An address' location can change, or an address
could age out and then be added back in at a
different location in the table. Thus, the
Manager could see the address twice in the table."
::= { hubAddressTable 2 }
hubNumBkpLinks OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The number of backup links configurable on this
hub."
::= { icfHub 7 }
hubBkpLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF HubBkpLinkEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
A list of backup link configuration entries. For
a given backup link, the hub will periodically
send a test packet to the device at the end of the
link. If there are no responses (the number is
configurable), the hub will enable the backup port
and disable the primary port. After the primary
link is fixed, the user must turn the primary port
on to resume normal operation.
At any time, the management station can look at
rptrPortAdminStatus for the backup port to
determine if it is currently in use.
The backup link algorithm enables and disables the
backup port by modifying rptrPortAdminStatus for
that port. After the backup port has been enabled
by the backup link algorithm, if the primary port
is subsequently enabled via the hub console port
or by a set of rptrPortAdminStatus, the backup
port will be turned off and the periodic test
packets will begin again.
When the backup link objects are set, the backup
port will be turned off, the primary port will be
turned on, and the periodic test packets will be
sent. The time between test packets is
configurable by setting hubBackupTestTime. The
number of failures needed to switch to the backup
link is configured by setting
hubBackupConsecutiveFails. The backup link
function can be turned off by setting
hubBackupPort to 0.
All five of the backup link objects must be set
together in a single PDU except for the case of
setting hubBackupPort to 0, in which case, the
hubBackupPort can be set without setting the other
objects. Currently, the size of the backup link
table is one; future releases may provide the
ability to monitor more than one backup link."
::= { icfHub 8 }
HubBkpLinkEntry ::=
SEQUENCE {
hubBkpLinkIndex Integer32,
hubBackupPort Integer32,
hubPrimaryPort Integer32,
hubBackupAddress MacAddress,
hubBackupTestTime TimeTicks,
hubBackupConsecutiveFails Integer32
}
hubBkpLinkIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
backup link configuration entry to which the
instance is applicable."
::= { hubBkpLinkTable 1 }
hubBackupPort OBJECT-TYPE
SYNTAX Integer32 (0..1024)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The port number of the backup link. Setting this
object to zero removes the backup link
configuration."
::= { hubBkpLinkTable 2 }
hubPrimaryPort OBJECT-TYPE
SYNTAX Integer32 (0..1024)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The port number of the primary link. It can only
be set to zero if the hubBackupPort is also zero."
::= { hubBkpLinkTable 3 }
hubBackupAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The MAC address of the device at the other end of
the primary link which will respond to the
periodic test packets sent by this hub."
::= { hubBkpLinkTable 4 }
hubBackupTestTime OBJECT-TYPE
SYNTAX TimeTicks --(100..1500)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The frequency, in time ticks, between sending the
periodic test packets. The actual resolution of
this timer is in seconds. The test packet
response timeout is fixed at 500ms."
::= { hubBkpLinkTable 5 }
hubBackupConsecutiveFails OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The number of test packet failures which will
cause the hub to switch to the backup link (i.e.,
backup port turned on, primary port turned off).
A value of one is generally not recomended and
will cause the backup link to be enabled upon the
first failure."
::= { hubBkpLinkTable 6 }
hubSqeEnabled OBJECT-TYPE
SYNTAX Integer32 -- INTEGER {
-- false(0),
-- true(1)
--}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
When 'true', this flag indicates that SQE has
been detected for the last ten agent transmits and
there is a high probability that the SQE switch on
the transceiver attached to the AUI port is set to
Enabled, when it should be Disabled."
::= { icfHub 9 }
--
-- The Hub address movement log. This table is implemented
-- only on rev 'E' or later EtherTwist hubs and AdvanceStack
-- 10Mbit hubs.
--
hubAddressMoveLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF HubAddressMoveLogEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
A log of the 20 most recent times that the agent
detected that a source MAC address which had been
heard on one port had moved to a different port."
::= { icfHub 11 }
hubAddressMoveLogEntry OBJECT-TYPE
SYNTAX HubAddressMoveLogEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
A row in the hubAddressMoveLogTable containing
information about a single address movement."
INDEX { hubAddrMoveIndex }
::= { hubAddressMoveLogTable 1 }
HubAddressMoveLogEntry ::=
SEQUENCE {
hubAddrMoveIndex Integer32,
hubAddrMoveAddress MacAddress,
hubAddrMoveOldGroup Integer32,
hubAddrMoveOldPort Integer32,
hubAddrMoveNewGroup Integer32,
hubAddrMoveNewPort Integer32
}
hubAddrMoveIndex OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The index of this entry in the address movement
log table. Index 1 will always contain the oldest
entry. If the table is full when a new address
movement occurs, the new entry becomes index 20,
and all earlier entries are shifted down by one
entry, removing the old index 1."
::= { hubAddressMoveLogEntry 1 }
hubAddrMoveAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The MAC address of the station that moved to a
new port."
::= { hubAddressMoveLogEntry 2 }
hubAddrMoveOldGroup OBJECT-TYPE
SYNTAX Integer32 (0..1024)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The group containing the port on which this
address had been operating before it moved."
::= { hubAddressMoveLogEntry 3 }
hubAddrMoveOldPort OBJECT-TYPE
SYNTAX Integer32 (0..1024)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The port within the group on which this address
had been operating before it moved."
::= { hubAddressMoveLogEntry 4 }
hubAddrMoveNewGroup OBJECT-TYPE
SYNTAX Integer32 (0..1024)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The group containing the port that the address
moved to."
::= { hubAddressMoveLogEntry 5 }
hubAddrMoveNewPort OBJECT-TYPE
SYNTAX Integer32 (0..1024)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The port within the group that the address moved
to."
::= { hubAddressMoveLogEntry 6 }
hubLateEventMonitor OBJECT-TYPE
SYNTAX INTEGER {
off(1),
onSingle(2),
onAll(3)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This object configures the late event monitoring
functionality for the hub. This mode periodically
samples the rptrMonitorPortLateEvents value for
each port. If the agent detects excessive late
events on a port, the port will be disabled by
setting the rptrPortAdminStatus for that port to
'disabled', and the hubPortLateEventDisable flag
for that port will be set to 'true'. This mode is
'off' by default. Setting it to 'onSingle'
enables the mode for all non-cascaded hub ports.
Setting it to 'onAll' enables the mode for all hub
ports, including cascaded ports."
::= { icfHub 12 }
-- Icf Bridge Group
operationalState OBJECT-TYPE
SYNTAX Integer32 -- INTEGER {
-- learning(0),
-- secure(1)
--}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This object controls the forwarding nature of the
bridge. In the Learning state the bridge will
learn new MAC addresses, and it ages out older MAC
addresses. Statically configured addresses are
discarded (they do not age). In the Secure state,
the bridge will not learn new MAC addresses.
Statically configured addresses are forwarded
(they do not age)."
::= { icfBridge 1 }
forwardDbMaxAge OBJECT-TYPE
SYNTAX TimeTicks --(1000..100000000)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The value of this object controls how long a MAC
address stays in the forwarding database. See
802.1d, section 3.9.2 'Dynamic Entries'."
::= { icfBridge 2 }
addressTable OBJECT-TYPE
SYNTAX SEQUENCE OF AddressEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
A list of address entries."
--INDEX { addressIndex }
::= { icfBridge 3 }
AddressEntry ::=
SEQUENCE {
addressIndex Integer32,
addressChunk OCTET STRING
}
addressIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
chunk to which this entry is applicable."
::= { addressTable 1 }
addressChunk OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(410))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This object returns an opaque chunk of the
address table. The instance specifies a chunk of
the address table. Each chunk can be interpreted
as an array of 41 records of the form:
{ macAddress[6bytes], port number[2bytes],
permanence[2bytes] }.
Address Port Perm
00 080009001234 1 Dynamic(0x0000)
01 080009002345 2 Dynamic(0x0000)
02 000000000000 EMPTY(0x8000) Dynamic(0x0000)
03 080009003456 1 Dynamic(0x0000)
04 000000000000 1 Dynamic(0x0000)
05 080009009876 EMPTY(0x8000) Dynamic(0x0000)
06 080009004567 EMPTY(0x8000) Static(0x0008)
07 080009041d08
... ... ...
40 080009005678 EOL(0x4000) Permanent(0x0000)
A value of EMPTY in the Port field indicates an
aged out table entry. A value of EOL in the Port
field indicates that it is the last entry in the
table. Of course, EOL will only be seen in the
last entry. EOL and EMPTY are AND-able bit
fields. The Disposition and Address are
meaningless if Port is EMPTY.
When instance=1 is used on a Set, the agent clears
the table prior to setting any addresses. On
subsequent Sets, the agent adds the specified
addresses. If a Set starts at instance > 1, the
specified addresses will be added to the table
without first clearing the table. Addresses are
already in the table are deleted and then
readded."
::= { addressTable 2 }
-- Bridge Port Group
brgPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF BrgPortEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
A list of brgPort entries."
--INDEX { brgPortIndex }
::= { icfBridge 4 }
BrgPortEntry ::=
SEQUENCE {
brgPortIndex Integer32,
brgPortCacheHits Counter32,
brgPortCacheMisses Counter32,
brgPortForwardedPkts Counter32,
brgPortFilteredPkts Counter32
}
brgPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
interface/port to which this entry is applicable.
The interface/port identified by a particular
value of this index is the same interface/port as
identified by the same value of ifIndex."
::= { brgPortTable 1 }
brgPortCacheHits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of the successful cache matches when
looking up a destination MAC address."
::= { brgPortTable 2 }
brgPortCacheMisses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of the unsuccessful cache matches when
looking up a destination MAC address."
::= { brgPortTable 3 }
brgPortForwardedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of the packets received on this port and
forwarded to the other port."
::= { brgPortTable 4 }
brgPortFilteredPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of the frames that were received on this
port and filtered."
::= { brgPortTable 5 }
-- Bridge Wildcard Group
--
-- The wildcard objects constitute a super-object.
-- To arm or redefine a wildcard filter, all 5 wildcard
-- objects (i.e. Filter, Mask, Offset, UserOffset, and Arm)
-- must be present and adjacent to each other within an SNMP
-- PDU. There is no requirement on the ordering of the
-- objects within the PDU.
--
-- To disarm a wildcard filter, only the arm object is needed.
-- When the Arm object is set to OFF, any other adjacent
-- wildcard objects are ignored.
--
wildcardTable OBJECT-TYPE
SYNTAX SEQUENCE OF WildcardEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
A list of wildcard entries."
--INDEX { wildcardIndex }
::= { icfBridge 5 }
WildcardEntry ::=
SEQUENCE {
wildcardIndex Integer32,
wildcardFilter OCTET STRING,
wildcardMask OCTET STRING,
wildcardOffset Integer32,
wildcardUserOffset Integer32,
wildcardArm Integer32
}
wildcardIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
interface/port to which this entry is applicable.
The interface/port identified by a particular
value of this index is the same interface/port as
identified by the same value of ifIndex."
::= { wildcardTable 1 }
wildcardFilter OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This object contains the binary value used to
filter frames. The data in the frame at the offset
specified by the Wildcard offsets is XOR'ed with
this object after AND'ing with the Wildcard Mask.
If zero result occurs, the packet is discarded
(filtered).
Suppose the user specifies the following values:
data: 11001010 10101010 10101010 10101010
mask: 11100000 00000000 00000000 00000000
filter: 11100000 00000000 00000000 00000000
AND'ing data with the mask gives:
11000000 00000000 00000000 00000000
XOR'ing that value with the filter gives:
00100000 00000000 00000000 00000000
The non-zero result indicates no match (don't
discard).
Another example:
data: 10011010 10101010 10101010 10101010
mask: 10010000 00000000 00000000 00000000
filter: 10010000 00000000 00000000 00000000
AND'ing data with the mask gives:
10010000 00000000 00000000 00000000
XOR'ing that value with the filter gives:
00000000 00000000 00000000 00000000
A zero result indicates a match, so we discard
(filter) the packet.
The filter AND'ed with the mask must equal the
filter. This is an example of a legal filter/mask
pair:
filter: 00010000 00000000 00000000 00000000
mask: 10010000 00000000 00000000 00000000
AND'ed: 00010000 00000000 00000000 00000000
(equals filter)
Another way of saying this: if a mask bit is zero,
the corresponding filter bit must be zero.
The following would be an illegal pair:
filter: 01110000 00000000 00000000 00000000
mask: 10010000 00000000 00000000 00000000
AND'ed: 00010000 00000000 00000000 00000000
( != filter)"
::= { wildcardTable 2 }
wildcardMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This object indicates which portion of the
wildcardFilter is to be used in filtering. The
data in the frame at the offset specified by
Wildcard offsets is AND'ed with this object. The
result is XOR'ed with the Wildcard Filter object.
If a zero result is obtained, the packet is
discarded.
If an all-zeros wildcardMask is specified, a
genErr is returned. Also, see mask/filter
constraints in the description of the
wildcardFilter object."
::= { wildcardTable 3 }
wildcardOffset OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Indicates the position in a received frame which
is to have the Wildcard Mask/Filter applied. The
indicated packet byte is aligned with the 0th byte
of the wildcard mask/filter held in network byte
order.
The MAC destination address starts at byte
position (wildcardOffset) zero.
The wildcardOffset must fall on a 2-byte boundary,
0,2,4,...,1512 (violations of this constraint
result in a genErr). Filters can be aligned on
non 2-byte boundaries through use of the
wildcardUserOffset."
::= { wildcardTable 4 }
wildcardUserOffset OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This value is a byte offset from the beginning
of the packet. If this offset is such that any
portion of the filter extends past the end of the
packet (for wildcard filtering purposes, the FCS
is part of the packet), then the filter is
considered not to match, and the packet is not
filtered.
For a particular filter, the wildcardUserOffset
must be greater than or equal to the
wildcardOffset.
wildcardUserOffset must be between 0 and 1514,
inclusive.
The wildcardUserOffset, wildcardOffset pair must
conform to one of the following four relationships
and also be subject to the range restrictions
listed above. For n = 0,..,378
Offset 4n 4n 4n 4n+2
UserOffset 4n 4n+1 4n+2 4n+3
As an example, consider four examples in the
following table for locating the filter at or near
the beginning of a packet:
- 6 filter/mask bytes - - desired -
0 1 2 3 4 5 6 - position -
A|f/m0 f/m1 f/m2 f/m3 00 00 00 |0,4,8,12,...
B| 00 f/m0 f/m1 f/m2 f/m3 00 00 |1,5,9,13,...
C| 00 00 f/m0 f/m1 f/m2 f/m3 00 |2,6,10,14,...
D| 00 00 00 f/m0 f/m1 f/m2 f/m3|3,7,11,15,...
Example A corresponds to a UserOffset/Offset pair
such as 0/0 (4n/4n). Example B represents a pair
such as 0/1 (4n/4n+1). Example C is 0/2
(4n/4n+2). Finally, example D is 2/3 (4n+2/4n+3).
If any of the above constraints is not honored,
the SET Response will indicate genErr."
::= { wildcardTable 5 }
wildcardArm OBJECT-TYPE
SYNTAX Integer32 -- INTEGER {
-- off(0),
-- on(1)
--}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This object arms (enables) the Wildcard Filter
provided all of the other wildcard objects have
been set to proper values. To disarm a wildcard,
only the wildcardArm object need be set."
::= { wildcardTable 6 }
-- Bridge Spanning Tree Group
stp OBJECT IDENTIFIER ::= { icfBridge 6 }
stpBridgeId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
A 64 bit binary bridge id composed of bridge
priority and the bridge's mac address fields. see:
IEEE 802.1(d) 6.8.1.1.3(1), 4.5.3.7"
::= { stp 1 }
stpTopoChangeTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The time since the last topology change. see:
IEEE 802.1(d) 6.8.1.1.3(2), 4.5.3.12"
::= { stp 2 }
stpTopoNumChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The number of topo changes since initialization
of STP. see: IEEE 802.1(d) 6.8.1.1.3(3)"
::= { stp 3 }
stpTopoChange OBJECT-TYPE
SYNTAX Integer32 -- INTEGER {
-- false(0),
-- true(1)
--}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
A 1 bit flag broadcast by the root bridge
indicating that a topology change is underway, and
Stp bridges should use short term aging. see: IEEE
802.1(d) 6.8.1.1.3(4), 4.5.3.12"
::= { stp 4 }
stpDesignatedRoot OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The binary bridge id that this bridge believes to
be the root bridge for the bridged Lan. see: IEEE
802.1(d) 6.8.1.1.3(5), 4.5.3.1"
::= { stp 5 }
stpRootCost OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The cost of the path to the root bridge from this
bridge; equal to the sum of the designated cost
and the path cost held for the root port. see:
IEEE 802.1(d) 6.8.1.1.3(6), 4.5.3.2"
::= { stp 6 }
stpRootPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The port id that this bridge believes to be the
root bridge's root port for the bridged Lan. see:
IEEE 802.1(d) 6.8.1.1.3(7), 4.5.3.3"
::= { stp 7 }
stpCurrentMaxAge OBJECT-TYPE
SYNTAX Integer32 (6..40)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The Max Age value received from the Root Bridge
(in seconds); the Stp is currently using the
value. see: IEEE 802.1(d) 6.8.1.1.3(8), 4.5.3.4"
::= { stp 8 }
stpCurrentHelloTime OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The Hello time value received from the Root
Bridge (in seconds); the Stp records the value.
see: IEEE 802.1(d) 6.8.1.1.3(9), 4.5.3.5"
::= { stp 9 }
stpCurrentForwardDelay OBJECT-TYPE
SYNTAX Integer32 (4..10)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The forward delay value received from the Root
Bridge (in seconds); the Stp is currently using
the value. see: IEEE 802.1(d) 6.8.1.1.3(10),
4.5.3.6"
::= { stp 10 }
stpMaxAge OBJECT-TYPE
SYNTAX Integer32 (6..40)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The maximum age allowed of Config information for
a port before a bridge will attempt to become the
root (in seconds). Transmitted by this bridge when
it is, or is attempting to become the root. see:
IEEE 802.1(d) 6.8.1.1.3(11), 6.8.1.2.2(1),
4.5.3.8"
::= { stp 11 }
stpHelloTime OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The time between Config packet transmission when
this bridge is, or is attempting to become the
root (in seconds). Transmitted by this bridge when
it is, or is attempting to become the root. see:
IEEE 802.1(d) 6.8.1.1.3(12), 6.8.1.2.2(2),
4.5.3.9"
::= { stp 12 }
stpForwardDelay OBJECT-TYPE
SYNTAX Integer32 (4..30)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The time spent in the Listening and Learning
states used when this bridge is, or is attempting
to become the root (in seconds). Transmitted by
this bridge when it is, or is attempting to become
the root. see: IEEE 802.1(d) 6.8.1.1.3(13),
6.8.1.2.2(3), 4.5.3.10"
::= { stp 13 }
stpPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The upper 16 bits of the 64 bit BridgeId composed
of priority and the bridge's mac address fields.
see: IEEE 802.1(d) 6.8.1.2.2(4), 4.5.3.7"
::= { stp 14 }
-- Bridge Spanning Tree Port Group
stpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StpPortEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
A list of stpPort entries."
--INDEX { stpPortIndex }
::= { stp 15 }
StpPortEntry ::=
SEQUENCE {
stpPortIndex Integer32,
stpPortState Integer32,
stpPortId Integer32,
stpPortPathCost Integer32,
stpPortRootId OCTET STRING,
stpPortDesignatedCost Integer32,
stpPortDesignatedBridge OCTET STRING,
stpPortDesignatedPort Integer32,
stpPortPriority Integer32
}
stpPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
port to which this entry is applicable. The port
identified by a particular value of this index is
the same interface/port as identified by the same
value of ifIndex. Not an IEEE 802.1(d) reqmt."
::= { stpPortTable 1 }
stpPortState OBJECT-TYPE
SYNTAX Integer32 -- INTEGER {
-- stpDisabled(0), - settable
-- stpListening(1),
-- stpLearning(2),
-- stpForwarding(3),
-- stpBlocking(4) - settable
--}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The state of a port on a 2 port bridge is really
the state of the bridge itself. Management is only
allowed to set this object to 'stpDisabled' or
'stpBlocking'. Setting the object to 'stpDisabled'
will turn off spanning tree only if the state is
not 'stpBlocking' (to prevent loops). Setting the
object to 'stpBlocking' will turn on spanning tree
only if it was previously disabled. see: IEEE
802.1(d) 6.8.2.1.3(2), 4.4, 4.5.5.2"
::= { stpPortTable 2 }
stpPortId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The 16 bit port id composed of priority and the
port's unique id fields. see: IEEE 802.1(d)
6.8.2.1.3(3), 4.5.5.1"
::= { stpPortTable 3 }
stpPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The contribution of the path through this port,
when the port is the root port, to the total cost
of the path to the root for this bridge. see: IEEE
802.1(d) 6.8.2.1.3(4), 6.8.2.3.2(2), 4.5.5.3"
::= { stpPortTable 4 }
stpPortRootId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The bridge id that this port believes to be the
root bridge for the bridged Lan. see: IEEE
802.1(d) 6.8.2.1.3(5), 4.5.5.4"
::= { stpPortTable 5 }
stpPortDesignatedCost OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The cost of the path to the root offered by the
Designated Port on the LAN to which this Port is
attached. see: IEEE 802.1(d) 6.8.2.1.3(6),
4.5.5.5"
::= { stpPortTable 6 }
stpPortDesignatedBridge OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The Bridge Id of the designated bridge for the
LAN associated with the port. see: IEEE 802.1(d)
6.8.2.1.3(7), 4.5.5.6"
::= { stpPortTable 7 }
stpPortDesignatedPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The port id of the bridge believed to be the
designated port of the LAN associated with the
port. see: IEEE 802.1(d) 6.8.2.1.3(8), 4.5.5.7"
::= { stpPortTable 8 }
stpPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The upper 8 bits of the 16 bit PortId composed of
priority and the port's unique id fields. see:
IEEE 802.1(d) 6.8.2.3.2(3), 4.5.5.1"
::= { stpPortTable 9 }
-- Icf HDLC Error Group
hdlcErrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF HdlcErrorEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
A list of hdlcError entries."
--INDEX { hdlcErrorIndex }
::= { icfBridge 7 }
HdlcErrorEntry ::=
SEQUENCE {
hdlcErrorIndex Integer32,
hdlcErrorIndications Counter32,
hdlcT1Timeouts Counter32,
hdlcMissedPackets Counter32,
hdlcRcvOverruns Counter32,
hdlcXmtUnderruns Counter32,
hdlcProviderLostPrimitives Counter32,
hdlcRuntFrameReceives Counter32,
hdlcGiantFrameReceives Counter32,
hdlcBadFrameReceives Counter32,
hdlcRejectFrameReceives Counter32,
hdlcRejectFrameSends Counter32,
hdlcFrameRejectFrameRecs Counter32
}
hdlcErrorIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The index value which uniquely identifies the
port to which this entry is applicable. The port
identified by a particular value of this index is
the same interface/port as identified by the same
value of ifIndex. IcfBridge.HP28674: There is only
one 'real' instance of this object on port 2."
::= { hdlcErrorTable 1 }
hdlcErrorIndications OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Errors occurring during information transfer
which required instruction from CPU for recovery.
This is a serious link problem. The local node
will either reset or disconnect after receiving
this message."
::= { hdlcErrorTable 2 }
hdlcT1Timeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The number of times the retransmission timer
(x25T1Timer) timed out."
::= { hdlcErrorTable 3 }
hdlcMissedPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of the frames lost by the receiver because
there wasn't a receive buffer."
::= { hdlcErrorTable 4 }
hdlcRcvOverruns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of the number of times the reciever's FIFO
was full when the receiver was ready to put new
data into the FIFO."
::= { hdlcErrorTable 5 }
hdlcXmtUnderruns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of the number of times the transmitter has
aborted a frame transmission because data was
late from memory."
::= { hdlcErrorTable 6 }
hdlcProviderLostPrimitives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of the number of lost control frames due to
802.3 priority processing on receive."
::= { hdlcErrorTable 7 }
hdlcRuntFrameReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of the HDLC frames received that were less
than the minimum legal HDLC size."
::= { hdlcErrorTable 8 }
hdlcGiantFrameReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of the HDLC frames received that were
larger than the maximum legal size that can be
sent on the 802.3 LAN link."
::= { hdlcErrorTable 9 }
hdlcBadFrameReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of the sum of: HDLC frames with bad
checksum, and misaligned HDLC frames."
::= { hdlcErrorTable 10 }
hdlcRejectFrameReceives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of the HDLC reject frames received."
::= { hdlcErrorTable 11 }
hdlcRejectFrameSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of the HDLC reject frames sent."
::= { hdlcErrorTable 12 }
hdlcFrameRejectFrameRecs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of the HDLC frame reject frames (FRMR)
received."
::= { hdlcErrorTable 13 }
-- Icf HDLC Local Group
hdlcLocalTable OBJECT-TYPE
SYNTAX SEQUENCE OF HdlcLocalEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
A list of hdlcLocal entries."
--INDEX { hdlcLocalIndex }
::= { icfBridge 8 }
HdlcLocalEntry ::=
SEQUENCE {
hdlcLocalIndex Integer32,
hdlcLocalResetRequests Counter32,
hdlcLocalResetConfirms Counter32,
hdlcLocalConnectRequests Counter32,
hdlcLocalConnectConfirms Counter32,
hdlcLocalDisconnectRequests Counter32,
hdlcLocalDisconnectConfirms Counter32,
hdlcLocalState Integer32,
hdlcLocalAddress INTEGER,
hdlcLocalPhase Integer32
}
hdlcLocalIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Index into Hdlc local statistics table on a per
port basis. bridge.HP28674: There is only one
'real' instance of this object on port 2."
::= { hdlcLocalTable 1 }
hdlcLocalResetRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of local HDLC requests to reset current
logical link."
::= { hdlcLocalTable 2 }
hdlcLocalResetConfirms OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of local HDLC node link reset
confirmations."
::= { hdlcLocalTable 3 }
hdlcLocalConnectRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of local HDLC node attempts to establish
logical link."
::= { hdlcLocalTable 4 }
hdlcLocalConnectConfirms OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of local HDLC node connect request
acceptances."
::= { hdlcLocalTable 5 }
hdlcLocalDisconnectRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of local HDLC node disconnect requests."
::= { hdlcLocalTable 6 }
hdlcLocalDisconnectConfirms OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of local HDLC node disconnects granted."
::= { hdlcLocalTable 7 }
hdlcLocalState OBJECT-TYPE
SYNTAX Integer32 -- INTEGER {
-- t1HdlcStateNormal(0),
-- t1HdlcStateBusy(1),
-- t1HdlcStateRejectSent(2),
-- t1HdlcStateDiscSent(3),
-- t1HdlcStateDisconnect(4),
-- t1HdlcStateConnSent(5),
-- t1HdlcStateFrameRejectSent(6),
-- t1HdlcStateResetSent(7),
-- t1HdlcStateErrorIndication(8)
--}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Current local HDLC operational state."
::= { hdlcLocalTable 8 }
hdlcLocalAddress OBJECT-TYPE
SYNTAX INTEGER {
hdlcDTEAddress(1),
hdlcDCEAddress(3)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The local HDLC address during communication with
the remote node. This object is valid only if a
brouter is on the remote end of the HDLC link. It
can only be set to one of the two values:
'hdlcDTEAddress' or 'hdlcDTEAddress'. Furthermore,
the setting of this object must be different from
the setting of the hdlcRemoteHdlcAddress object.
This object, along with hdlcRemoteAddress and
hdlcRemoteNodeId, constitute a superobject. See
hdlcRemoteNodeId for more details."
::= { hdlcLocalTable 9 }
hdlcLocalPhase OBJECT-TYPE
SYNTAX Integer32 -- INTEGER {
-- t1PhaseStopped(-1),
-- t1PhaseInfo(0),
-- t1PhaseDisconnect(1),
-- t1PhaseReset(2),
-- t1PhaseTransparentData(3)
--}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Current HDLC operational phase."
::= { hdlcLocalTable 10 }
-- Icf HDLC Remote Group
hdlcRemoteTable OBJECT-TYPE
SYNTAX SEQUENCE OF HdlcRemoteEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
A list of hdlcRemote entries."
--INDEX { hdlcRemoteIndex }
::= { icfBridge 9 }
HdlcRemoteEntry ::=
SEQUENCE {
hdlcRemoteIndex Integer32,
hdlcRemoteResetRequests Counter32,
hdlcRemoteResetConfirms Counter32,
hdlcRemoteConnectRequests Counter32,
hdlcRemoteConnectConfirms Counter32,
hdlcRemoteDisconnectRequests Counter32,
hdlcRemoteState Integer32,
hdlcRemoteAddress INTEGER,
hdlcRemoteXidCommands Counter32,
hdlcRemoteXidResponses Counter32,
hdlcRemoteTestCommands Counter32,
hdlcRemoteTestResponses Counter32,
hdlcRemoteNodeId Integer32
}
hdlcRemoteIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Index into Hdlc remote statistics table on a per
port basis. bridge.HP28674: There is only one
'real' instance of this object on port 2."
::= { hdlcRemoteTable 1 }
hdlcRemoteResetRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of remote HDLC requests to reset current
logical link."
::= { hdlcRemoteTable 2 }
hdlcRemoteResetConfirms OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of remote HDLC node link reset
confirmations."
::= { hdlcRemoteTable 3 }
hdlcRemoteConnectRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of remote HDLC node attempts to establish
logical link."
::= { hdlcRemoteTable 4 }
hdlcRemoteConnectConfirms OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of remote HDLC node connect request
acceptances."
::= { hdlcRemoteTable 5 }
hdlcRemoteDisconnectRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of remote HDLC node disconnect requests."
::= { hdlcRemoteTable 6 }
hdlcRemoteState OBJECT-TYPE
SYNTAX Integer32 -- INTEGER {
-- t1HdlcStateNormal(0),
-- t1HdlcStateBusy(1),
-- t1HdlcStateRejectSent(2),
-- t1HdlcStateDiscSent(3),
-- t1HdlcStateDisconnect(4),
-- t1HdlcStateConnSent(5),
-- t1HdlcStateFrameRejectSent(6),
-- t1HdlcStateResetSent(7),
-- t1HdlcStateErrorIndication(8)
--}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Current remote HDLC operational state."
::= { hdlcRemoteTable 7 }
hdlcRemoteAddress OBJECT-TYPE
SYNTAX INTEGER {
hdlcDTEAddress(1),
hdlcDCEAddress(3)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The remote HDLC address during communication with
the local node. This object is valid only if a
brouter is on the remote end of the HDLC link. It
can only be set to one of the two values:
'hdlcDCEAddress' or 'hdlcDTEAddress'. Furthermore,
the setting of this object must be different from
the setting of the hdlcLocalAddress object. This
object, along with hdlcLocalAddress and
hdlcRemoteNodeId, constitute a superobject. See
hdlcRemoteNodeId for more details."
::= { hdlcRemoteTable 8 }
hdlcRemoteXidCommands OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of XID commands issued by remote node."
::= { hdlcRemoteTable 9 }
hdlcRemoteXidResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of XID responses issued by remote node."
::= { hdlcRemoteTable 10 }
hdlcRemoteTestCommands OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of Test commands issued by remote node."
::= { hdlcRemoteTable 11 }
hdlcRemoteTestResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Count of Test responses issued by remote node."
::= { hdlcRemoteTable 12 }
hdlcRemoteNodeId OBJECT-TYPE
SYNTAX Integer32 -- INTEGER {
-- remoteNodeBridge(0),
-- remoteNodeRouter(1), - Settable
-- remoteNodeUnknown(2) - Settable
--}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Identification of the node at the opposite end of
the HDLC link (eg. brouter or bridge). This
object, along with hdlcLocalAddress and
hdlcRemoteAddress, constitute a superobject. This
object may only be set to one of the two values:
'remoteNodeBridge' or 'remoteNodeRouter'. If this
object is set to 'remoteNodeUnknown', then
hdlcLocalAddress and hdlcRemoteAddress need not be
supplied, and will be ignored if provided. In a
get, this object may report 'remoteNodeBridge',
but attempts to set this object to
'remoteNodeBridge' will result in an error pdu
with error type invalidData. If this object is set
to 'remoteNodeRouter', then hdlcLocalAddress and
hdlcRemoteAddress must be present and contiguous
in the pdu in order to properly complete the
superobject. The three objects may be in any order
within the pdu."
::= { hdlcRemoteTable 13 }
-- Icf X25 Group
x25Table OBJECT-TYPE
SYNTAX SEQUENCE OF X25Entry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
A list of X25 entries."
--INDEX { x25Index }
::= { icfBridge 10 }
X25Entry ::=
SEQUENCE {
x25Index Integer32,
x25T1Timer TimeTicks,
x25N2Count Integer32,
x25T3Timer TimeTicks
}
x25Index OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Index into X25 remote timer table on a per port
basis. bridge.HP28674: There is only one 'real'
instance of this object on port 2."
::= { x25Table 1 }
x25T1Timer OBJECT-TYPE
SYNTAX TimeTicks --(300..2000)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Period of time used to timeout retransmits for
X25."
::= { x25Table 2 }
x25N2Count OBJECT-TYPE
SYNTAX Integer32 (4..30)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Number of retries to be performed during X.25
communication."
::= { x25Table 3 }
x25T3Timer OBJECT-TYPE
SYNTAX TimeTicks --(1000..3000)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Period of idle time before a disconnect is
executed for X25."
::= { x25Table 4 }
-- ICF Configuration group.
icfConfigIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF IcfConfigIfEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This table contains per-interface configuration
information that will take effect after the next
reset of the device."
::= { icfConfig 1 }
icfConfigIfEntry OBJECT-TYPE
SYNTAX IcfConfigIfEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
An entry in the icfConfigIfTable containing
information about a single interface."
INDEX { icfConfigIfIndex }
::= { icfConfigIfTable 1 }
IcfConfigIfEntry ::=
SEQUENCE {
icfConfigIfIndex Integer32,
icfConfigIfIpAddress IpAddress,
icfConfigIfNetMask IpAddress,
icfConfigIfDefaultGate IpAddress
}
icfConfigIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
The index of the interface which this information
contains configuration information for. The
interface identified by a particular value of this
index is the same interface identified by the same
value of ifIndex."
::= { icfConfigIfEntry 1 }
icfConfigIfIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This variable contains the IP address for this
interface which will be used after the next reset
of the device."
::= { icfConfigIfEntry 2 }
icfConfigIfNetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This variable contains the IP subnet mask for
this interface which will be used after the next
reset of the device."
::= { icfConfigIfEntry 3 }
icfConfigIfDefaultGate OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This variable contains the IP address of the
default router for this interface which will be
used after the next reset of the device."
::= { icfConfigIfEntry 4 }
icfConfigIpTTL OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
This variable contains the default IP time to
live which will be used after the next reset of
the device."
::= { icfConfig 2 }
icfConfigBootpEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"********* THIS OBJECT IS OBSOLETE *********
Setting this flag to 'enabled' (the default) will
clear any existing IP address configuration for
this device, and will cause the device to use the
Bootp protocol to obtain its IP configuration
after the next reset. This flag must be set to
'disabled' in order to configure an IP address for
the device. Setting this flag to 'disabled' will
prevent the Bootp protocol from running. Setting
this flag to 'disabled' when there is no IP
address configured will disable the IP protocol
stack on this device."
::= { icfConfig 3 }
-- Trap definitions
--
-- The following hack is needed because these traps were sent
-- with sysObjectId in the enterprise field even for enterprise
-- specific traps. This means it needs a separate definition
-- for each trap for each box that can send it.
bridge1010TrapPrefix OBJECT IDENTIFIER ::= { bridge1010 0 }
bridgeRemoteTrapPrefix OBJECT IDENTIFIER ::= { bridgeRemote 0 }
etherTwist12TrapPrefix OBJECT IDENTIFIER ::= { etherTwist12 0 }
fiberOpticTrapPrefix OBJECT IDENTIFIER ::= { fiberOptic 0 }
etherTwist48TrapPrefix OBJECT IDENTIFIER ::= { etherTwist48 0 }
thinLANTrapPrefix OBJECT IDENTIFIER ::= { thinLAN 0 }
etherTwist24STrapPrefix OBJECT IDENTIFIER ::= { etherTwist24S 0 }
advStack12TrapPrefix OBJECT IDENTIFIER ::= { advStack12 0 }
advStack24TrapPrefix OBJECT IDENTIFIER ::= { advStack24 0 }
advStack48TrapPrefix OBJECT IDENTIFIER ::= { advStack48 0 }
advStackU8TrapPrefix OBJECT IDENTIFIER ::= { advStackU8 0 }
advStackU16TrapPrefix OBJECT IDENTIFIER ::= { advStackU16 0 }
repeaterAgentTrapPrefix OBJECT IDENTIFIER ::= { repeaterAgent 0 }
hpicfEnetSMMTrapPrefix OBJECT IDENTIFIER ::= { hpicfEnetSMM 0 }
-- ICF Common trap definitions
thresholdTrap1010 NOTIFICATION-TYPE
OBJECTS { evthObject, evthThreshold, evthHysteresis,
evthTimeInterval }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval."
::= { bridge1010TrapPrefix 0 }
thresholdTrapRem NOTIFICATION-TYPE
OBJECTS { evthObject, evthThreshold, evthHysteresis,
evthTimeInterval }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval."
::= { bridgeRemoteTrapPrefix 0 }
thresholdTrapET12 NOTIFICATION-TYPE
OBJECTS { evthObject, evthThreshold, evthHysteresis,
evthTimeInterval }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval."
::= { etherTwist12TrapPrefix 0 }
thresholdTrapET48 NOTIFICATION-TYPE
OBJECTS { evthObject, evthThreshold, evthHysteresis,
evthTimeInterval }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval."
::= { etherTwist48TrapPrefix 0 }
thresholdTrapTLAN NOTIFICATION-TYPE
OBJECTS { evthObject, evthThreshold, evthHysteresis,
evthTimeInterval }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval."
::= { thinLANTrapPrefix 0 }
thresholdTrapFiber NOTIFICATION-TYPE
OBJECTS { evthObject, evthThreshold, evthHysteresis,
evthTimeInterval }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval."
::= { fiberOpticTrapPrefix 0 }
thresholdTrapET24S NOTIFICATION-TYPE
OBJECTS { evthObject, evthThreshold, evthHysteresis,
evthTimeInterval }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval."
::= { etherTwist24STrapPrefix 0 }
thresholdTrapAS12 NOTIFICATION-TYPE
OBJECTS { evthObject, evthThreshold, evthHysteresis,
evthTimeInterval }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval."
::= { advStack12TrapPrefix 0 }
thresholdTrapAS24 NOTIFICATION-TYPE
OBJECTS { evthObject, evthThreshold, evthHysteresis,
evthTimeInterval }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval."
::= { advStack24TrapPrefix 0 }
thresholdTrapAS48 NOTIFICATION-TYPE
OBJECTS { evthObject, evthThreshold, evthHysteresis,
evthTimeInterval }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval."
::= { advStack48TrapPrefix 0 }
thresholdTrapASU8 NOTIFICATION-TYPE
OBJECTS { evthObject, evthThreshold, evthHysteresis,
evthTimeInterval }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval."
::= { advStackU8TrapPrefix 0 }
thresholdTrapASU16 NOTIFICATION-TYPE
OBJECTS { evthObject, evthThreshold, evthHysteresis,
evthTimeInterval }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval."
::= { advStackU16TrapPrefix 0 }
thresholdTrapASEN NOTIFICATION-TYPE
OBJECTS { evthObject, evthThreshold, evthHysteresis,
evthTimeInterval }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval."
::= { repeaterAgentTrapPrefix 0 }
thresholdTrapSMM NOTIFICATION-TYPE
OBJECTS { evthObject, evthThreshold, evthHysteresis,
evthTimeInterval }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A thresholdTrap(0) is specific to ICF devices. It
signifies that the threshold entity in the device
has detected that the object identified by
evthObject has exceeded the threshold identified
by evthThreshold during the time interval
evthTimeInterval. After this condition occurs, it
will not reoccur until the the object identified
by evthObject falls below evthHysteresis for the
duration of evthTimeInterval."
::= { hpicfEnetSMMTrapPrefix 0 }
-- Icf Hub trap definitions
linkBeatTrapET12 NOTIFICATION-TYPE
OBJECTS { hubPortLinkBeatStatus }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A linkBeatTrap(3) is device type specific to ICF
hubs. It signifies that the hub hardware has
detected a change of state in a port's link beat
status. The current value of the port's link beat
status is returned in the PDU."
::= { etherTwist12TrapPrefix 3 }
linkBeatTrapET48 NOTIFICATION-TYPE
OBJECTS { hubPortLinkBeatStatus }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A linkBeatTrap(3) is device type specific to ICF
hubs. It signifies that the hub hardware has
detected a change of state in a port's link beat
status. The current value of the port's link beat
status is returned in the PDU."
::= { etherTwist48TrapPrefix 3 }
linkBeatTrapTLAN NOTIFICATION-TYPE
OBJECTS { hubPortLinkBeatStatus }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A linkBeatTrap(3) is device type specific to ICF
hubs. It signifies that the hub hardware has
detected a change of state in a port's link beat
status. The current value of the port's link beat
status is returned in the PDU."
::= { thinLANTrapPrefix 3 }
linkBeatTrapFiber NOTIFICATION-TYPE
OBJECTS { hubPortLinkBeatStatus }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A linkBeatTrap(3) is device type specific to ICF
hubs. It signifies that the hub hardware has
detected a change of state in a port's link beat
status. The current value of the port's link beat
status is returned in the PDU."
::= { fiberOpticTrapPrefix 3 }
linkBeatTrapET24S NOTIFICATION-TYPE
OBJECTS { hubPortLinkBeatStatus }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A linkBeatTrap(3) is device type specific to ICF
hubs. It signifies that the hub hardware has
detected a change of state in a port's link beat
status. The current value of the port's link beat
status is returned in the PDU."
::= { etherTwist24STrapPrefix 3 }
linkBeatTrapASEN NOTIFICATION-TYPE
OBJECTS { hubPortLinkBeatStatus }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A linkBeatTrap(3) is device type specific to ICF
hubs. It signifies that the hub hardware has
detected a change of state in a port's link beat
status. The current value of the port's link beat
status is returned in the PDU."
::= { repeaterAgentTrapPrefix 3 }
linkBeatTrapSMM NOTIFICATION-TYPE
OBJECTS { hubPortLinkBeatStatus }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A linkBeatTrap(3) is device type specific to ICF
hubs. It signifies that the hub hardware has
detected a change of state in a port's link beat
status. The current value of the port's link beat
status is returned in the PDU."
::= { hpicfEnetSMMTrapPrefix 3 }
segmentationTrapET12 NOTIFICATION-TYPE
OBJECTS { hubPortSegmentation }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A segmentationTrap(4) is device type specific to
ICF hubs. It signifies that the hub hardware has
detected a change of state in a port's
segmentation status. The current value of the
port's segmentation status is returned in the
PDU."
::= { etherTwist12TrapPrefix 4 }
segmentationTrapET48 NOTIFICATION-TYPE
OBJECTS { hubPortSegmentation }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A segmentationTrap(4) is device type specific to
ICF hubs. It signifies that the hub hardware has
detected a change of state in a port's
segmentation status. The current value of the
port's segmentation status is returned in the
PDU."
::= { etherTwist48TrapPrefix 4 }
segmentationTrapTLAN NOTIFICATION-TYPE
OBJECTS { hubPortSegmentation }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A segmentationTrap(4) is device type specific to
ICF hubs. It signifies that the hub hardware has
detected a change of state in a port's
segmentation status. The current value of the
port's segmentation status is returned in the
PDU."
::= { thinLANTrapPrefix 4 }
segmentationTrapFiber NOTIFICATION-TYPE
OBJECTS { hubPortSegmentation }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A segmentationTrap(4) is device type specific to
ICF hubs. It signifies that the hub hardware has
detected a change of state in a port's
segmentation status. The current value of the
port's segmentation status is returned in the
PDU."
::= { fiberOpticTrapPrefix 4 }
segmentationTrapET24S NOTIFICATION-TYPE
OBJECTS { hubPortSegmentation }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A segmentationTrap(4) is device type specific to
ICF hubs. It signifies that the hub hardware has
detected a change of state in a port's
segmentation status. The current value of the
port's segmentation status is returned in the
PDU."
::= { etherTwist24STrapPrefix 4 }
segmentationTrapASEN NOTIFICATION-TYPE
OBJECTS { hubPortSegmentation }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A segmentationTrap(4) is device type specific to
ICF hubs. It signifies that the hub hardware has
detected a change of state in a port's
segmentation status. The current value of the
port's segmentation status is returned in the
PDU."
::= { repeaterAgentTrapPrefix 4 }
segmentationTrapSMM NOTIFICATION-TYPE
OBJECTS { hubPortSegmentation }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A segmentationTrap(4) is device type specific to
ICF hubs. It signifies that the hub hardware has
detected a change of state in a port's
segmentation status. The current value of the
port's segmentation status is returned in the
PDU."
::= { hpicfEnetSMMTrapPrefix 4 }
backupLinkTrapET12 NOTIFICATION-TYPE
OBJECTS { ifAdminStatus }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A backupLinkTrap(5) is device type specific to
most ICF hubs. It signifies that there has been a
change in state of ifAdminStatus for a backup
port on the hub. The new value of ifAdminStatus
is returned in the PDU.
Backup links are not supported on the HP28688A
hub."
::= { etherTwist12TrapPrefix 5 }
backupLinkTrapET48 NOTIFICATION-TYPE
OBJECTS { ifAdminStatus }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A backupLinkTrap(5) is device type specific to
most ICF hubs. It signifies that there has been a
change in state of ifAdminStatus for a backup
port on the hub. The new value of ifAdminStatus
is returned in the PDU."
::= { etherTwist48TrapPrefix 5 }
backupLinkTrapTLAN NOTIFICATION-TYPE
OBJECTS { ifAdminStatus }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A backupLinkTrap(5) is device type specific to
most ICF hubs. It signifies that there has been a
change in state of ifAdminStatus for a backup
port on the hub. The new value of ifAdminStatus
is returned in the PDU."
::= { thinLANTrapPrefix 5 }
backupLinkTrapFiber NOTIFICATION-TYPE
OBJECTS { ifAdminStatus }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A backupLinkTrap(5) is device type specific to
most ICF hubs. It signifies that there has been a
change in state of ifAdminStatus for a backup
port on the hub. The new value of ifAdminStatus
is returned in the PDU."
::= { fiberOpticTrapPrefix 5 }
backupLinkTrapET24S NOTIFICATION-TYPE
OBJECTS { rptrPortAdminStatus }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A backupLinkTrap(5) is device type specific to
most ICF hubs. It signifies that there has been a
change in state of rptrPortAdminStatus for a
backup port on the hub. The new value of
rptrPortAdminStatus is returned in the PDU."
::= { etherTwist24STrapPrefix 5 }
backupLinkTrapASEN NOTIFICATION-TYPE
OBJECTS { rptrPortAdminStatus }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A backupLinkTrap(5) is device type specific to
most ICF hubs. It signifies that there has been a
change in state of rptrPortAdminStatus for a
backup port on the hub. The new value of
rptrPortAdminStatus is returned in the PDU."
::= { repeaterAgentTrapPrefix 5 }
backupLinkTrapSMM NOTIFICATION-TYPE
OBJECTS { rptrPortAdminStatus }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A backupLinkTrap(5) is device type specific to
most ICF hubs. It signifies that there has been a
change in state of rptrPortAdminStatus for a
backup port on the hub. The new value of
rptrPortAdminStatus is returned in the PDU."
::= { hpicfEnetSMMTrapPrefix 5 }
intrusionTrapET24S NOTIFICATION-TYPE
OBJECTS { hubIntruderAddress, hubIntruderPort }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
An intrusionTrap(6) is device type specific to
EtherTwist hubs with revision 'E' firmware or
later and AdvanceStack hubs. It signifies that a
port security violation has been detected on a
port which has the hubSecPtAlarmEnable flag set
to 'enabled'. The MAC address of the intruder
and the port on which the intrusion occurred are
returned in the PDU."
::= { etherTwist24STrapPrefix 6 }
intrusionTrapASEN NOTIFICATION-TYPE
OBJECTS { hubIntruderAddress, hubIntruderPort }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
An intrusionTrap(6) is device type specific to
EtherTwist hubs with revision 'E' firmware or
later and AdvanceStack hubs. It signifies that a
port security violation has been detected on a
port which has the hubSecPtAlarmEnable flag set
to 'enabled'. The MAC address of the intruder
and the port on which the intrusion occurred are
returned in the PDU."
::= { repeaterAgentTrapPrefix 6 }
intrusionTrapSMM NOTIFICATION-TYPE
OBJECTS { hubIntruderAddress, hubIntruderPort }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
An intrusionTrap(6) is device type specific to
EtherTwist hubs with revision 'E' firmware or
later and AdvanceStack hubs. It signifies that a
port security violation has been detected on a
port which has the hubSecPtAlarmEnable flag set
to 'enabled'. The MAC address of the intruder
and the port on which the intrusion occurred are
returned in the PDU."
::= { hpicfEnetSMMTrapPrefix 6 }
addressMovedTrapET24S NOTIFICATION-TYPE
OBJECTS { hubAddrMoveAddress, hubAddrMoveOldGroup,
hubAddrMoveOldPort, hubAddrMoveNewGroup,
hubAddrMoveNewPort }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
An addressMovedTrap(7) is device type specific
to EtherTwist hubs with revision 'E' firmware or
later and AdvanceStack hubs. It signifies that a
source MAC address which had been operating at
one port has moved to a new port. The MAC
address that moved, the group and port that the
address moved from, and the group and port that
the address moved to are returned in the PDU."
::= { etherTwist24STrapPrefix 7 }
addressMovedTrapASEN NOTIFICATION-TYPE
OBJECTS { hubAddrMoveAddress, hubAddrMoveOldGroup,
hubAddrMoveOldPort, hubAddrMoveNewGroup,
hubAddrMoveNewPort }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
An addressMovedTrap(7) is device type specific
to EtherTwist hubs with revision 'E' firmware or
later and AdvanceStack hubs. It signifies that a
source MAC address which had been operating at
one port has moved to a new port. The MAC
address that moved, the group and port that the
address moved from, and the group and port that
the address moved to are returned in the PDU."
::= { repeaterAgentTrapPrefix 7 }
addressMovedTrapSMM NOTIFICATION-TYPE
OBJECTS { hubAddrMoveAddress, hubAddrMoveOldGroup,
hubAddrMoveOldPort, hubAddrMoveNewGroup,
hubAddrMoveNewPort }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
An addressMovedTrap(7) is device type specific
to EtherTwist hubs with revision 'E' firmware or
later and AdvanceStack hubs. It signifies that a
source MAC address which had been operating at
one port has moved to a new port. The MAC
address that moved, the group and port that the
address moved from, and the group and port that
the address moved to are returned in the PDU."
::= { hpicfEnetSMMTrapPrefix 7 }
newAddressTrapET24S NOTIFICATION-TYPE
OBJECTS { rptrAddrTrackLastSourceAddress }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A newAddressTrap(8) is device type specific to
EtherTwist hubs with revision 'E' firmware or
later and AdvanceStack hubs. It signifies that a
new MAC address has been detected on one of the
hub's ports. The instance of
rptrAddrTrackLastSourceAddress for the port with
the new address is returned in the PDU."
::= { etherTwist24STrapPrefix 8 }
newAddressTrapASEN NOTIFICATION-TYPE
OBJECTS { rptrAddrTrackLastSourceAddress }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A newAddressTrap(8) is device type specific to
EtherTwist hubs with revision 'E' firmware or
later and AdvanceStack hubs. It signifies that a
new MAC address has been detected on one of the
hub's ports. The instance of
rptrAddrTrackLastSourceAddress for the port with
the new address is returned in the PDU."
::= { repeaterAgentTrapPrefix 8 }
newAddressTrapSMM NOTIFICATION-TYPE
OBJECTS { rptrAddrTrackLastSourceAddress }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A newAddressTrap(8) is device type specific to
EtherTwist hubs with revision 'E' firmware or
later and AdvanceStack hubs. It signifies that a
new MAC address has been detected on one of the
hub's ports. The instance of
rptrAddrTrackLastSourceAddress for the port with
the new address is returned in the PDU."
::= { hpicfEnetSMMTrapPrefix 8 }
-- ICF Bridge traps
stpTrap1010 NOTIFICATION-TYPE
OBJECTS { stpPortState }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A stpTrap(3) is device type specific to ICF
bridges. It signifies that the Spanning Tree
entity in the bridge has detected a change of
state to either Blocking or Forwarding."
::= { bridge1010TrapPrefix 3 }
stpTrapRem NOTIFICATION-TYPE
OBJECTS { stpPortState }
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A stpTrap(3) is device type specific to ICF
bridges. It signifies that the Spanning Tree
entity in the bridge has detected a change of
state to either Blocking or Forwarding."
::= { bridgeRemoteTrapPrefix 3 }
temperatureTrap1010 NOTIFICATION-TYPE
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A temperatureTrap(4) is device type specific to
ICF bridges. It signifies that the bridge hardware
has detected an overheated condition."
::= { bridge1010TrapPrefix 4 }
temperatureTrapRem NOTIFICATION-TYPE
STATUS obsolete
DESCRIPTION
"********* THIS NOTIFICATION IS OBSOLETE *********
A temperatureTrap(4) is device type specific to
ICF bridges. It signifies that the bridge hardware
has detected an overheated condition."
::= { bridgeRemoteTrapPrefix 4 }
-- conformance information
icfETCompliances
OBJECT IDENTIFIER ::= { icfETwistConformance 1 }
icfETGroups
OBJECT IDENTIFIER ::= { icfETwistConformance 2 }
-- compliance statements
icfETwistHubCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"********* THIS COMPLIANCE IS OBSOLETE *********
The compliance statement for EtherTwist hub
devices."
MODULE
MANDATORY-GROUPS { icfCommonBasicGroup,
icfCommonIpGroup,
icfMappingGroup,
icfIpMappingGroup,
icf8023MacGroup,
icfEncryptedPasswordGroup,
hubBasicGroup,
hubMappingGroup }
GROUP hubLinkBeatControlGroup
DESCRIPTION
"This group is implemented on all EtherTwist
hubs that are capable of disabling linkbeat
detection on their ports. Note that the
HP28682A Fiber Optic Hub is incapable of
disabling link beat (low light)."
::= { icfETCompliances 1 }
icfETwistBridgeCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"********* THIS COMPLIANCE IS OBSOLETE *********
The compliance statement for EtherTwist bridge
devices."
MODULE
MANDATORY-GROUPS { icfCommonBasicGroup,
icfCommonIpGroup,
icfMappingGroup,
icfIpMappingGroup,
icf8023MacGroup,
icfEncryptedPasswordGroup,
icfBridgeBasicGroup,
icfBridgeSpanningTreeGroup }
GROUP icfRemoteBridgeGroup
DESCRIPTION
"This group is mandatory on all EtherTwist
remote bridges."
::= { icfETCompliances 2 }
icfETwistHubDCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"********* THIS COMPLIANCE IS OBSOLETE *********
The compliance statement for EtherTwist hub devices
updated for Revision D firmware features."
MODULE
MANDATORY-GROUPS { icfCommonBasicGroup,
icfMappingGroup,
icf8023MacGroup,
icfEncryptedPasswordGroup,
hubBasicGroup,
hubMappingGroup,
hubBasicAddrTableGroup }
GROUP icfCommonIpGroup
DESCRIPTION
"This group is implemented on all EtherTwist
devices that support the IP protocol stack.
Note that the HP28688A did not support the
IP protocol stack when it was running an
IPX code image."
GROUP icfCommonIpxGroup
DESCRIPTION
"This group is implemented on all EtherTwist
devices that support the IPX protocol stack.
Note that the HP28688A did not support the
IP protocol stack when it was running an
IPX code image. Also note that IPX was not
supported on any release C EtherTwist agents."
GROUP icfIpMappingGroup
DESCRIPTION
"This group is implemented on all EtherTwist
devices that support the IP protocol stack.
Note that the HP28688A did not support the
IP protocol stack when it was running an
IPX code image."
GROUP icfIpxMappingGroup
DESCRIPTION
"This group is implemented on all EtherTwist
devices that support the IPX protocol stack.
Note that the HP28688A did not support the
IP protocol stack when it was running an
IPX code image. Also note that IPX was not
supported on any release C EtherTwist agents."
GROUP icfDownloadGroup
DESCRIPTION
"This group is appropriate on all EtherTwist
devices that have network download capability.
Note that the HP28688A did not have network
download capability. Also note that network
download was not supported in any release C
EtherTwist agents."
GROUP hubLinkBeatControlGroup
DESCRIPTION
"This group is implemented on all EtherTwist
hubs that are capable of disabling linkbeat
detection on their ports. Note that the
HP28682A Fiber Optic Hub is incapable of
disabling link beat (low light). Also note that
the HP28692A ThinLAN Hub is incapable of
disabling linkbeat (loopback)."
GROUP hubBasicEnhancementsGroup
DESCRIPTION
"This group is implemented on all EtherTwist
hubs that are capable of detecting a MAU
attached to the AUI port incorrectly has SQE
enabled. Note that the HP28688A hub was
incapable of detecting this condition."
GROUP hubReadableAddrTableGroup
DESCRIPTION
"This optional group is implemented only on
the HP28692A ThinLAN Hub."
GROUP hubBackupLinkGroup
DESCRIPTION
"This group is implemented on all EtherTwist
hubs that support backup links. Note that the
HP28688A hub does not support backup links."
::= { icfETCompliances 3 }
icfETwistBridgeDCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"********* THIS COMPLIANCE IS OBSOLETE *********
The compliance statement for EtherTwist hub devices
updated for Revision D firmware features."
MODULE
MANDATORY-GROUPS { icfCommonBasicGroup,
icfCommonIpGroup,
icfCommonIpxGroup,
icfMappingGroup,
icfIpMappingGroup,
icfIpxMappingGroup,
icf8023MacGroup,
icfDownloadGroup,
icfEncryptedPasswordGroup,
icfBridgeBasicGroup,
icfBridgeSpanningTreeGroup }
GROUP icfRemoteBridgeGroup
DESCRIPTION
"This group is mandatory on all EtherTwist
remote bridges."
::= { icfETCompliances 4 }
icfETwistHub24SCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"********* THIS COMPLIANCE IS OBSOLETE *********
The compliance statement for secure EtherTwist
hubs,updated to reflect the new features of the
EtherTwist Hub/24S."
MODULE
MANDATORY-GROUPS { icfCommonBasicGroup,
icfCommonIpGroup,
icfCommonIpxGroup,
icfMappingGroup,
icfIpMappingGroup,
icfIpxMappingGroup,
icf8023MacGroup,
icfDownloadGroup,
hubBasicGroup,
hubBasicEnhancementsGroup,
hubNewEnhancementsGroup,
hubLinkBeatControlGroup,
hubMappingGroup,
hubBasicAddrTableGroup,
hubReadableAddrTableGroup,
hubBackupLinkGroup,
hubAddressMoveGroup,
icfConfigGroup }
::= { icfETCompliances 5 }
icfAdvStkCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"********* THIS COMPLIANCE IS OBSOLETE *********
The compliance statement for AdvanceStack
10Mbit hubs."
MODULE
MANDATORY-GROUPS { icfCommonBasicGroup,
icfCommonIpGroup,
icfCommonIpxGroup,
icfMappingGroup,
icfIpMappingGroup,
icfIpxMappingGroup,
icf8023MacGroup,
hubBasicGroup,
hubBasicEnhancementsGroup,
hubNewEnhancementsGroup,
hubLinkBeatControlGroup,
hubMappingGroup,
hubBasicAddrTableGroup,
hubReadableAddrTableGroup,
hubBackupLinkGroup,
hubAddressMoveGroup,
hubLateEventMonitorGroup,
icfConfigGroup }
::= { icfETCompliances 6 }
icfAdvStkSlaveCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"********* THIS COMPLIANCE IS OBSOLETE *********
The compliance statement for AdvanceStack 10BaseT
slave hubs."
MODULE
MANDATORY-GROUPS { icfSlaveMappingGroup,
icf8023MacSlaveGroup,
hubBasicSlaveGroup,
hubMappingGroup,
hubLinkBeatControlGroup,
hubBasicEnhancementsGroup,
hubNewEnhancementsGroup }
::= { icfETCompliances 7 }
icfAdvStkVGCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"********* THIS COMPLIANCE IS OBSOLETE *********
The compliance statement for AdvanceStack
100VG hubs."
MODULE
MANDATORY-GROUPS { icfMappingGroup,
icfIpMappingGroup,
icfIpxMappingGroup,
icfConfigGroup }
::= { icfETCompliances 8 }
icfAdvStkVGSlaveCompliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"********* THIS COMPLIANCE IS OBSOLETE *********
The compliance statement for AdvanceStack 100VG
slave hubs."
MODULE
MANDATORY-GROUPS { icfSlaveMappingGroup }
::= { icfETCompliances 9 }
-- units of conformance
icfCommonBasicGroup OBJECT-GROUP
OBJECTS { lastSetError,
reset,
selfTest,
semaphore,
pollResponse,
evtIndex,
evtArm,
evtTimeSinceOccurrence,
evthIndex,
evthArm,
evthObject,
evthThreshold,
evthHysteresis,
evthTimeInterval,
evthTimeSinceOccurrence
}
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of obsolete objects thate were
shared by EtherTwist hubs, EtherTwist bridges,
and AdvanceStack 10BaseT hubs."
::= { icfETGroups 1 }
icfCommonIpGroup OBJECT-GROUP
OBJECTS { ipSubnetMask,
evtIpNotify
}
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of obsolete objects thate were
shared by EtherTwist hubs, EtherTwist bridges,
and AdvanceStack 10BaseT hubs that support IP."
::= { icfETGroups 2 }
icfCommonIpxGroup OBJECT-GROUP
OBJECTS { evtIpxNotify }
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of obsolete objects thate were
shared by EtherTwist hubs, EtherTwist bridges,
and AdvanceStack 10BaseT hubs that support IPX."
::= { icfETGroups 3 }
icfEncryptedPasswordGroup OBJECT-GROUP
OBJECTS { password }
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of obsolete objects that were shared
by EtherTwist hubs and EtherTwist bridges. Was
not implemented on EtherTwist Hub/24S or on any
AdvanceStack product."
::= { icfETGroups 4 }
icfMappingGroup OBJECT-GROUP
OBJECTS { announceAddress,
mapAddress,
mapState,
mapPort,
linkTest802MacAddress,
linkTestRepetitions,
linkTestSuccess,
linkTestTimeout
}
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of objects for mapping MAC addresses
to device ports."
::= { icfETGroups 5 }
icfIpMappingGroup OBJECT-GROUP
OBJECTS { linkTestIpAddress }
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of objects for using IP-layer addresses
in mapping operations."
::= { icfETGroups 6 }
icfIpxMappingGroup OBJECT-GROUP
OBJECTS { linkTestIpxAddress }
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of objects for using IPX-layer
addresses in mapping operations."
::= { icfETGroups 7 }
icfSlaveMappingGroup OBJECT-GROUP
OBJECTS { mapAddress,
mapState,
mapPort
}
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of objects for mapping MAC addresses
to device ports on slave AdvanceStack devices."
::= { icfETGroups 8 }
icf8023MacGroup OBJECT-GROUP
OBJECTS { icf8023MacIndex,
icf8023MacInBroadcastPkts,
icf8023MacOutBroadcastPkts,
icf8023MacInMulticastPkts,
icf8023MacOutMulticastPkts,
icf8023MacRunts,
icf8023MacGiants,
icf8023MacMissedPktErrors,
icf8023MacExcessDeferrals,
icf8023MacTotalMediaErrors,
icf8023MacSpuriousIntrs
}
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of 802.3 specific statistics for
device ports."
::= { icfETGroups 9 }
icf8023MacSlaveGroup OBJECT-GROUP
OBJECTS { icf8023MacIndex,
icf8023MacRunts,
icf8023MacGiants,
icf8023MacMissedPktErrors,
icf8023MacExcessDeferrals,
icf8023MacTotalMediaErrors,
icf8023MacSpuriousIntrs
}
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of 802.3 specific statistics for
device ports. on slave AdvanceStack devices."
::= { icfETGroups 10 }
icfDownloadGroup OBJECT-GROUP
OBJECTS { icfDownloadIpAddress,
icfDownloadIpxAddress,
icfDownloadFilename
}
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of objects for initiating a network
download of device firmware on EtherTwist devices."
::= { icfETGroups 11 }
hubBasicGroup OBJECT-GROUP
OBJECTS { hubThinlanFault,
hubGlobalErrors,
hubGlobalCollisions,
hubGlobalPktFragments,
hubGlobalRunts,
hubGlobalGiants,
hubGlobalCrcErrors,
hubGlobalAlignmentErrors,
hubGlobalInOctets,
hubGlobalInUcastPkts,
hubGlobalInNUcastPkts,
hubGlobalInBroadcastPkts,
hubPortPktFragments,
hubPortCollisions,
hubPortSegmentation,
hubPortLinkBeatStatus,
hubPortsOperStatus
}
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of objects for managing ICF hubs."
::= { icfETGroups 12 }
hubBasicSlaveGroup OBJECT-GROUP
OBJECTS { hubThinlanFault,
hubGlobalErrors,
hubGlobalCollisions,
hubGlobalPktFragments,
hubGlobalRunts,
hubGlobalGiants,
hubGlobalCrcErrors,
hubGlobalAlignmentErrors,
hubGlobalInOctets,
hubPortPktFragments,
hubPortCollisions,
hubPortSegmentation,
hubPortLinkBeatStatus,
hubPortsOperStatus
}
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of objects for managing slave ICF
hubs."
::= { icfETGroups 13 }
hubMappingGroup OBJECT-GROUP
OBJECTS { hubPortIndex,
hubPortMacAddress,
hubPortAddressState
}
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of objects used for mapping MAC
addresses to hub ports."
::= { icfETGroups 14 }
hubLinkBeatControlGroup OBJECT-GROUP
OBJECTS { hubPortLinkBeatEnable }
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of objects for enabling or disabling
the link beat detection function on hub ports."
::= { icfETGroups 15 }
hubBasicEnhancementsGroup OBJECT-GROUP
OBJECTS { hubSqeEnabled }
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of objects adding simple enhancements
to the basic hub management objects."
::= { icfETGroups 16 }
hubBasicAddrTableGroup OBJECT-GROUP
OBJECTS { hubAddressTableMaxAge }
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of objects for controlling the hub
address table, even when the table itself is not
readable."
::= { icfETGroups 17 }
hubReadableAddrTableGroup OBJECT-GROUP
OBJECTS { hubAddressIndex,
hubAddressChunk
}
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of objects for accessing a MAC address
to port number table on ICF hubs."
::= { icfETGroups 18 }
hubBackupLinkGroup OBJECT-GROUP
OBJECTS { hubNumBkpLinks,
hubBkpLinkIndex,
hubBackupPort,
hubPrimaryPort,
hubBackupAddress,
hubBackupTestTime,
hubBackupConsecutiveFails
}
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of objects for configuring backup links
on ICF hubs."
::= { icfETGroups 19 }
hubNewEnhancementsGroup OBJECT-GROUP
OBJECTS { hubPortPolarityReversed }
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of objects providing new enhancements
to the basic hub management objects."
::= { icfETGroups 20 }
hubAddressMoveGroup OBJECT-GROUP
OBJECTS { hubAddrMoveIndex,
hubAddrMoveAddress,
hubAddrMoveOldGroup,
hubAddrMoveOldPort,
hubAddrMoveNewGroup,
hubAddrMoveNewPort
}
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of objects for tracking station address
movement between ports on a hub."
::= { icfETGroups 21 }
hubLateEventMonitorGroup OBJECT-GROUP
OBJECTS { hubPortLateEventDisable,
hubLateEventMonitor
}
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of objects to control the late event
monitor function of ICF hubs."
::= { icfETGroups 22 }
icfBridgeBasicGroup OBJECT-GROUP
OBJECTS { operationalState,
forwardDbMaxAge,
addressIndex,
addressChunk,
brgPortIndex,
brgPortCacheHits,
brgPortCacheMisses,
brgPortForwardedPkts,
brgPortFilteredPkts,
wildcardIndex,
wildcardFilter,
wildcardMask,
wildcardOffset,
wildcardUserOffset,
wildcardArm
}
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of objects for managing ICF bridges."
::= { icfETGroups 23 }
icfBridgeSpanningTreeGroup OBJECT-GROUP
OBJECTS { stpBridgeId,
stpTopoChangeTime,
stpTopoNumChanges,
stpTopoChange,
stpDesignatedRoot,
stpRootCost,
stpRootPort,
stpCurrentMaxAge,
stpCurrentHelloTime,
stpCurrentForwardDelay,
stpMaxAge,
stpHelloTime,
stpForwardDelay,
stpPriority,
stpPortIndex,
stpPortState,
stpPortId,
stpPortPathCost,
stpPortRootId,
stpPortDesignatedCost,
stpPortDesignatedBridge,
stpPortDesignatedPort,
stpPortPriority
}
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of objects for managing the Spanning
Tree Protocol on ICF bridges."
::= { icfETGroups 24 }
icfRemoteBridgeGroup OBJECT-GROUP
OBJECTS { hdlcErrorIndex,
hdlcErrorIndications,
hdlcT1Timeouts,
hdlcMissedPackets,
hdlcRcvOverruns,
hdlcXmtUnderruns,
hdlcProviderLostPrimitives,
hdlcRuntFrameReceives,
hdlcGiantFrameReceives,
hdlcBadFrameReceives,
hdlcRejectFrameReceives,
hdlcRejectFrameSends,
hdlcFrameRejectFrameRecs,
hdlcLocalIndex,
hdlcLocalResetRequests,
hdlcLocalResetConfirms,
hdlcLocalConnectRequests,
hdlcLocalConnectConfirms,
hdlcLocalDisconnectRequests,
hdlcLocalDisconnectConfirms,
hdlcLocalState,
hdlcLocalAddress,
hdlcLocalPhase,
hdlcRemoteIndex,
hdlcRemoteResetRequests,
hdlcRemoteResetConfirms,
hdlcRemoteConnectRequests,
hdlcRemoteConnectConfirms,
hdlcRemoteDisconnectRequests,
hdlcRemoteState,
hdlcRemoteAddress,
hdlcRemoteXidCommands,
hdlcRemoteXidResponses,
hdlcRemoteTestCommands,
hdlcRemoteTestResponses,
hdlcRemoteNodeId,
x25Index,
x25T1Timer,
x25N2Count,
x25T3Timer
}
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of objects for managing the remote link
on ICF remote bridges."
::= { icfETGroups 25 }
icfConfigGroup OBJECT-GROUP
OBJECTS { icfConfigIfIndex,
icfConfigIfIpAddress,
icfConfigIfNetMask,
icfConfigIfDefaultGate,
icfConfigIpTTL,
icfConfigBootpEnable
}
STATUS obsolete
DESCRIPTION
"********* THIS GROUP IS OBSOLETE *********
A collection of objects for configuring the IP
protocol stack in ICF agents."
::= { icfETGroups 26 }
END
Reference in New Issue View Git Blame Copy Permalink