mirror of
https://github.com/librenms/librenms.git
synced 2024-10-07 16:52:45 +00:00
53a4e91e8c
git-svn-id: http://www.observium.org/svn/observer/trunk@1645 61d68cd4-352d-0410-923a-c4978735b2b8
337 lines
14 KiB
Plaintext
337 lines
14 KiB
Plaintext
DEVROUTE-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
IpAddress
|
|
FROM RFC1155-SMI
|
|
OBJECT-TYPE, MODULE-IDENTITY
|
|
FROM SNMPv2-SMI
|
|
device
|
|
FROM ANIROOT-MIB;
|
|
|
|
-- the aniDevRouteTable group
|
|
|
|
|
|
aniDevRoute MODULE-IDENTITY
|
|
LAST-UPDATED "0105091130Z" -- Wed May 9 11:30:00 PDT 2001
|
|
ORGANIZATION "Aperto Networks"
|
|
CONTACT-INFO
|
|
"
|
|
Postal: Aperto Networks Inc
|
|
1637 S Main Street
|
|
Milpitas, California 95035
|
|
Tel: +1 408 719 9977
|
|
"
|
|
DESCRIPTION
|
|
"The aniDevRoutingTable allows the user to view and configure routes.
|
|
|
|
It is similar to the ipRouteTable in RFC1213 except that the table
|
|
is indexed on 3 objects (aniDevRouteDest, aniDevRouteNextHop,
|
|
aniDevRouteMask instead of just one). Also, some of the objects
|
|
are read-only since our software does not allow their configuration.
|
|
|
|
Routes can be added and deleted using this table. The
|
|
aniDevRouteNextHop field for existing routes can be modified.
|
|
|
|
To add an entry, send a set request with all the index fields set
|
|
appropriately. It is required to specify aniDevRouteFlag while
|
|
adding a new route.
|
|
|
|
To delete an entry, select the row with the correct index fields and
|
|
set the parameter aniDevRouteType to invalid(2).
|
|
Note, aniDevRouteType cannot be set as anything else other than invalid(2).
|
|
|
|
When the device (BSU or SU) is in Bridge mode, the routing table will
|
|
not be displayed.
|
|
"
|
|
::= { device 9 }
|
|
|
|
|
|
aniDevRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AniDevRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entity's IP Routing table."
|
|
::= { aniDevRoute 1 }
|
|
|
|
aniDevRouteEntry OBJECT-TYPE
|
|
SYNTAX AniDevRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A route to a particular destination."
|
|
INDEX { aniDevRouteDest, aniDevRouteNextHop, aniDevRouteMask }
|
|
::= { aniDevRouteTable 1 }
|
|
|
|
AniDevRouteEntry ::=
|
|
SEQUENCE {
|
|
aniDevRouteDest
|
|
IpAddress,
|
|
aniDevRouteIfIndex
|
|
INTEGER,
|
|
aniDevRouteMetric1
|
|
INTEGER,
|
|
aniDevRouteMetric2
|
|
INTEGER,
|
|
aniDevRouteMetric3
|
|
INTEGER,
|
|
aniDevRouteMetric4
|
|
INTEGER,
|
|
aniDevRouteNextHop
|
|
IpAddress,
|
|
aniDevRouteType
|
|
INTEGER,
|
|
aniDevRouteProto
|
|
INTEGER,
|
|
aniDevRouteAge
|
|
INTEGER,
|
|
aniDevRouteMask
|
|
IpAddress,
|
|
aniDevRouteMetric5
|
|
INTEGER,
|
|
aniDevRouteInfo
|
|
OBJECT IDENTIFIER,
|
|
aniDevRouteFlag
|
|
INTEGER
|
|
}
|
|
|
|
aniDevRouteDest OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of this route. An
|
|
entry with a value of 0.0.0.0 is considered a
|
|
default route. Multiple routes to a single
|
|
destination can appear in the table."
|
|
::= { aniDevRouteEntry 1 }
|
|
|
|
aniDevRouteIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the
|
|
local interface through which the next hop of this
|
|
route should be reached. The interface identified
|
|
by a particular value of this index is the same
|
|
interface as identified by the same value of
|
|
ifIndex."
|
|
::= { aniDevRouteEntry 2 }
|
|
|
|
aniDevRouteMetric1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The primary routing metric for this route. The
|
|
semantics of this metric are determined by the
|
|
routing-protocol specified in the route's
|
|
aniDevRouteProto value. If this metric is not used,
|
|
its value should be set to -1."
|
|
::= { aniDevRouteEntry 3 }
|
|
|
|
aniDevRouteMetric2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An alternate routing metric for this route. The
|
|
semantics of this metric are determined by the
|
|
routing-protocol specified in the route's
|
|
aniDevRouteProto value. If this metric is not used,
|
|
its value should be set to -1."
|
|
::= { aniDevRouteEntry 4 }
|
|
|
|
aniDevRouteMetric3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An alternate routing metric for this route. The
|
|
semantics of this metric are determined by the
|
|
routing-protocol specified in the route's
|
|
aniDevRouteProto value. If this metric is not used,
|
|
its value should be set to -1."
|
|
::= { aniDevRouteEntry 5 }
|
|
|
|
aniDevRouteMetric4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An alternate routing metric for this route. The
|
|
semantics of this metric are determined by the
|
|
routing-protocol specified in the route's
|
|
aniDevRouteProto value. If this metric is not used,
|
|
its value should be set to -1."
|
|
::= { aniDevRouteEntry 6 }
|
|
|
|
aniDevRouteNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of the next hop of this route.
|
|
(In the case of a route bound to an interface
|
|
which is realized via a broadcast media, the value
|
|
of this field is the agent's IP address on that
|
|
interface.)"
|
|
::= { aniDevRouteEntry 7 }
|
|
|
|
aniDevRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
|
|
invalid(2), -- an invalidated route
|
|
|
|
-- route to directly
|
|
direct(3), -- connected (sub-)network
|
|
|
|
-- route to a non-local
|
|
indirect(4) -- host/network/sub-network
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of route.
|
|
|
|
Currently, aniDevRouteType cannot be set to anything
|
|
other than invalid(2).
|
|
Setting this object to the value invalid(2) has
|
|
the effect of deleting/invalidating the
|
|
corresponding entry in the aniDevRouteTable object.
|
|
That is, it effectively dissasociates the destination
|
|
identified with said entry from the route identified
|
|
with said entry."
|
|
::= { aniDevRouteEntry 8 }
|
|
|
|
aniDevRouteProto OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
|
|
-- non-protocol information,
|
|
-- e.g., manually configured
|
|
local(2), -- entries
|
|
|
|
-- set via a network
|
|
netmgmt(3), -- management protocol
|
|
|
|
-- obtained via ICMP,
|
|
icmp(4), -- e.g., Redirect
|
|
|
|
-- the remaining values are
|
|
-- all gateway routing
|
|
-- protocols
|
|
egp(5),
|
|
ggp(6),
|
|
hello(7),
|
|
rip(8),
|
|
is-is(9),
|
|
es-is(10),
|
|
ciscoIgrp(11),
|
|
bbnSpfIgp(12),
|
|
ospf(13),
|
|
bgp(14)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The routing mechanism via which this route was
|
|
learned. Inclusion of values for gateway routing
|
|
protocols is not intended to imply that hosts
|
|
should support those protocols."
|
|
::= { aniDevRouteEntry 9 }
|
|
|
|
aniDevRouteAge OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of seconds since this route was last
|
|
updated or otherwise determined to be correct.
|
|
Note that no semantics of `too old' can be implied
|
|
except through knowledge of the routing protocol
|
|
by which the route was learned."
|
|
::= { aniDevRouteEntry 10 }
|
|
|
|
aniDevRouteMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicate the mask to be logical-ANDed with the
|
|
destination address before being compared to the
|
|
value in the aniDevRouteDest field. For those systems
|
|
that do not support arbitrary subnet masks, an
|
|
agent constructs the value of the aniDevRouteMask by
|
|
determining whether the value of the correspondent
|
|
aniDevRouteDest field belong to a class-A, B, or C
|
|
network, and then using one of:
|
|
|
|
mask network
|
|
255.0.0.0 class-A
|
|
255.255.0.0 class-B
|
|
255.255.255.0 class-C
|
|
|
|
If the value of the aniDevRouteDest is 0.0.0.0 (a
|
|
default route), then the mask value is also
|
|
0.0.0.0. It should be noted that all IP routing
|
|
subsystems implicitly use this mechanism.
|
|
In case of any other aniDevRouteDest (other than the
|
|
default route), 0.0.0.0 subnet mask is considered an
|
|
invalid mask.
|
|
|
|
Subnet mask 255.255.255.255 indicates that the route is
|
|
a Host route. A Network route cannot have subnet mask
|
|
as 255.255.255.255."
|
|
::= { aniDevRouteEntry 11 }
|
|
|
|
aniDevRouteMetric5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An alternate routing metric for this route. The
|
|
semantics of this metric are determined by the
|
|
routing-protocol specified in the route's
|
|
aniDevRouteProto value. If this metric is not used,
|
|
its value should be set to -1."
|
|
::= { aniDevRouteEntry 12 }
|
|
|
|
aniDevRouteInfo OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A reference to MIB definitions specific to the
|
|
particular routing protocol which is responsible
|
|
for this route, as determined by the value
|
|
specified in the route's aniDevRouteProto value. If
|
|
this information is not present, its value should
|
|
be set to the OBJECT IDENTIFIER { 0 0 }, which is
|
|
a syntatically valid object identifier, and any
|
|
conformant implementation of ASN.1 and BER must be
|
|
able to generate and recognize this value."
|
|
::= { aniDevRouteEntry 13 }
|
|
|
|
aniDevRouteFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
network(1), -- a network route
|
|
|
|
host(2) -- a host route
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The flag to be associated with this particular
|
|
route entry.
|
|
While adding a network route, set this value to
|
|
network(1). When a host route is being added, this
|
|
value is set to host(2). Also, for host route, the
|
|
subnet mask aniDevRouteMask has to be 255.255.255.255."
|
|
::= { aniDevRouteEntry 14 }
|
|
|
|
|
|
END
|