librenms-librenms/mibs/FOUNDRY-SN-IGMP-MIB

FOUNDRY-SN-IGMP-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE,IpAddress,Integer32
		FROM SNMPv2-SMI
	router
		FROM FOUNDRY-SN-ROOT-MIB
		;

snIgmp MODULE-IDENTITY
    LAST-UPDATED "201006020000Z"  -- 04 June 2010
    ORGANIZATION "Brocade Communications Systems, Inc."
    CONTACT-INFO
             "Technical Support Center
              130 Holger Way,
              San Jose, CA  95134
              Email:  ipsupport@brocade.com
              Phone: 1-800-752-8061
              URL:  www.brocade.com"
    DESCRIPTION
             "Copyright 1996-2010 Brocade Communications Systems, Inc.
              All rights reserved.
              This Brocade Communications Systems SNMP Management Information Base Specification
              embodies Brocade Communications Systems' confidential and proprietary
              intellectual property. Brocade Communications Systems retains all
              title and ownership in the Specification, including any revisions.

              This Specification is supplied AS IS, and Brocade Communications Systems makes
              no warranty, either express or implied, as to the use,
              operation, condition, or performance of the specification, and any unintended
              consequence it may on the user environment."

    REVISION        "201006020000Z"  -- 04 June 2010
    DESCRIPTION
        "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."

    REVISION     "200909300000Z" -- September 30, 2009
    DESCRIPTION
			""
   ::= { router 6}


-- SECTION 2: MIB

-- IGMP MIB

snIgmpMIBObjects OBJECT IDENTIFIER ::= { snIgmp 1 }

snIgmpQueryInterval OBJECT-TYPE
	SYNTAX     INTEGER (0..3600)
	MAX-ACCESS     read-write
	STATUS     current
	DESCRIPTION
			"This is the time interval at which this entity sends out
			IGMP host query packets. For a router, snDvmrpEnable must
			have been set to 'enabled' before this object is writen.
			For a switch, snSwGroupIpMcastMode must have been set to
			'enabled' and snSwIpMcastQuerierMode must have been set
			to 'querier' before this object is writen.
			Value 0 cannot be used for SET operations. This value
			is returned if IGMP is not configured within the system.
			For FI platform the configurable range for this object is
			10 .. 3600"
	DEFVAL     { 60 }
	::= { snIgmpMIBObjects 1 }

snIgmpGroupMembershipTime OBJECT-TYPE
	SYNTAX     INTEGER (0..7200)
	MAX-ACCESS     read-write
	STATUS     current
	DESCRIPTION
			"This is the time interval after which a group is considered
			inactive. For a router, snDvmrpEnable must have been set to
			'enabled' before this object is writen. For a switch,
			snSwGroupIpMcastMode must have been set to 'enabled' before
			this object is writen.
			Value 0 cannot be used for SET operations. This value
			is returned if IGMP is not configured within the system.
			For FI platform the configurable range for this object is
			20 .. 7200"
	DEFVAL     { 140 }
	::= { snIgmpMIBObjects 2 }

-- The IGMP Interface Table

snIgmpIfTable OBJECT-TYPE
	SYNTAX     SEQUENCE OF SnIgmpIfEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"This table comprises of a list of IGMP interface entries."
	::= { snIgmpMIBObjects 3 }

snIgmpIfEntry OBJECT-TYPE
	SYNTAX     SnIgmpIfEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"An entry (conceptual row) contains the group
			membership information for that port."
	INDEX      { snIgmpIfEntryIndex }
	::= { snIgmpIfTable 1 }

SnIgmpIfEntry ::= SEQUENCE {
	snIgmpIfEntryIndex         Integer32,
	snIgmpIfPortNumber         Integer32,
	snIgmpIfGroupAddress       IpAddress,
	snIgmpIfGroupAge           Integer32 }

snIgmpIfEntryIndex OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The table entry index."
	::= { snIgmpIfEntry 1 }

snIgmpIfPortNumber OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"This is the interface on which the group was learnt."
	::= { snIgmpIfEntry 2 }

snIgmpIfGroupAddress OBJECT-TYPE
	SYNTAX     IpAddress
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The group address learnt from the interface."
	::= { snIgmpIfEntry 3 }

snIgmpIfGroupAge OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"This is the interval (seconds) after which the group
			information will be aged out."
	::= { snIgmpIfEntry 4 }

-- The IGMP Static Group Table

snIgmpStaticGroupTable OBJECT-TYPE
	SYNTAX     SEQUENCE OF SnIgmpStaticGroupEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"This table comprises of a list of IGMP static group entries."
	::= { snIgmpMIBObjects 4 }

snIgmpStaticGroupEntry OBJECT-TYPE
	SYNTAX     SnIgmpStaticGroupEntry
	MAX-ACCESS     not-accessible
	STATUS     current
	DESCRIPTION
			"An entry (conceptual row) contains the IGMP static group
			membership information."
	INDEX      { snIgmpStaticGroupIfIndex, snIgmpStaticGroupAddress }
	::= { snIgmpStaticGroupTable 1 }

SnIgmpStaticGroupEntry ::= SEQUENCE {
	snIgmpStaticGroupIfIndex    Integer32,
	snIgmpStaticGroupAddress    IpAddress,
	snIgmpStaticGroupPortList   OCTET STRING,
	snIgmpStaticGroupRowStatus  INTEGER }

snIgmpStaticGroupIfIndex OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The interface of which the static group was configured."
	::= { snIgmpStaticGroupEntry 1 }

snIgmpStaticGroupAddress OBJECT-TYPE
	SYNTAX     IpAddress
	MAX-ACCESS     read-only
	STATUS     current
	DESCRIPTION
			"The group address of which the static group was configured."
	::= { snIgmpStaticGroupEntry 2 }

snIgmpStaticGroupPortList OBJECT-TYPE
	SYNTAX     OCTET STRING
	MAX-ACCESS     read-write
	STATUS     current
	DESCRIPTION
			"A list of ports which are the port membership of the
			static group. Each port is a 16-bit integer ifIndex."
	::= { snIgmpStaticGroupEntry 3 }

snIgmpStaticGroupRowStatus OBJECT-TYPE
	SYNTAX     INTEGER {
				 other(1),
				 valid(2),
				 delete(3),
				 create(4),
				 modify(5) }
	MAX-ACCESS     read-write
	STATUS     current
	DESCRIPTION
			"To create or delete a static group entry."
	::= { snIgmpStaticGroupEntry 4 }

END