mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
Files
65f82ba00e4e21b47cdb0449eae558ab3d09851a
librenms-librenms/mibs/NORTEL-WLAN-AP-MIB
Adam Amstrong 7445a736a6 move nortel mibs to root 
git-svn-id: http://www.observium.org/svn/observer/trunk@1576 61d68cd4-352d-0410-923a-c4978735b2b8
2010-07-31 16:07:50 +00:00

1784 lines
66 KiB
Plaintext
Raw Blame History

NORTEL-WLAN-AP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, NOTIFICATION-TYPE,
Counter32
FROM SNMPv2-SMI
DisplayString, TruthValue, PhysAddress, RowStatus, MacAddress,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
ifIndex, InterfaceIndex, ifPhysAddress
FROM IF-MIB
wlan2200
FROM SYNOPTICS-ROOT-MIB;
nortelWlanApMib MODULE-IDENTITY
LAST-UPDATED "200404120000Z"
ORGANIZATION "Nortel Networks"
CONTACT-INFO "Nortel Networks"
DESCRIPTION
"Nortel Wireless LAN AP MIB
Copyright 2003-2004 Nortel Networks, Inc.
All rights reserved.
This Nortel Networks SNMP Management Information Base Specification
(Specification) embodies Nortel Networks' confidential and
proprietary intellectual property. Nortel Networks retains all
title and ownership in the Specification, including any
revisions.
This Specification is supplied 'AS IS,' and Nortel Networks makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification."
REVISION "200307160000Z" -- 16 July 2003
DESCRIPTION "v001: Conversion to SMIv2"
REVISION "200309110000Z" -- 11 September 2003
DESCRIPTION "v005: Added ntWlanDot11TrapTable.
Added ntWlanApMuAssocTrap.
Added ntWlanApMuDisAssocTrap."
REVISION "200404120000Z" -- 12 April 2003
DESCRIPTION "v005: Updates for AP version 1.3.:
- Added ntWlanApDot1xAuthenticationFail, ntWlanApMuWEPAuthFail, and
ntWlanApMuWPAAuthFail NOTIFICATION-TYPEs.
- Added ntWlanApMuAssocTrapEnabled and ntWlanApMuDisAssocTrapEnabled
NOTIFICATION-TYPEs.
- Added ntWlanApLID, ntWlanApRateSupport, ntWlanApSecurity,
ntWlanApQoS, ntWlanApVlan, ntWlanApStats groups.
- Added NtWlanApDataRate, NtWlanApWEPKey TEXTUAL-CONVENTIONS.
- Added ntWlanSwNNDataFileVer.
- Changed enumerations of ntWlanTransferType to ftpDownload(1),
tftpDownload(2), ftpUpload(3), and tftpUpload(4).
- Added ntWlanFileTransferStatus.
- Added ntWlanDot11dWorldModeEnabled and ntWlanDot11ClosedSystem.
- Added ntWlanDot118021xBcastKeyRefresh,
ntWlanDot118021xSessKeyRefresh, and ntWlanDot118021xReAuthRefresh.
- Added ntWlanDot11SecondaryAuthServer, ntWlanDot11SecondaryAuthPort,
ntWlanDot11SecondaryAuthKey, ntWlanDot11SecondaryAuthRetransmit,
and ntWlanDot11SecondaryAuthTimeout."
::= { wlan2200 1 }
-- Nortel AP OBJECT IDs Groups
ntWlanApSys OBJECT IDENTIFIER ::= { nortelWlanApMib 1 }
ntWlanApLineMgnt OBJECT IDENTIFIER ::= { nortelWlanApMib 2 }
ntWlanApPortMgnt OBJECT IDENTIFIER ::= { nortelWlanApMib 3 }
ntWlanApFileTransferMgt OBJECT IDENTIFIER ::= { nortelWlanApMib 4 }
ntWlanApResetMgt OBJECT IDENTIFIER ::= { nortelWlanApMib 5 }
ntWlanApIpMgt OBJECT IDENTIFIER ::= { nortelWlanApMib 6 }
ntWlanApDot11 OBJECT IDENTIFIER ::= { nortelWlanApMib 7 }
ntWlanApTraps OBJECT IDENTIFIER ::= { nortelWlanApMib 8 }
ntWlanApLID OBJECT IDENTIFIER ::= { nortelWlanApMib 9 }
ntWlanApRateSupport OBJECT IDENTIFIER ::= { nortelWlanApMib 10 }
ntWlanApSecurity OBJECT IDENTIFIER ::= { nortelWlanApMib 11 }
ntWlanApQoS OBJECT IDENTIFIER ::= { nortelWlanApMib 12 }
ntWlanApVlan OBJECT IDENTIFIER ::= { nortelWlanApMib 13 }
ntWlanApStats OBJECT IDENTIFIER ::= { nortelWlanApMib 14 }
-- ****************************************************************************
-- Textual Conventions
-- ****************************************************************************
NtWlanApDataRate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A data rate, measured in increments of 500Kb/s from 1 Mb/s
to 63.5 Mb/s. For example, a value of 2 means a data rate
of 1 Mb/s, while a value of 5 means a data rate of 2.5 Mb/s."
SYNTAX Integer32 (2..127)
NtWlanApWEPKey ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "A WEP key. Valid sizes are 5, 13, and 16 octets,
corresponding to WEP key lengths of 64, 128, and 152
bits, respectively. A length of 0 is also allowed, so
that retrieval of objects containing a valid key value
can return an empty string so as to avoid key disclosure."
SYNTAX OCTET STRING (SIZE(0|5|13|16))
-- ****************************************************************************
-- END Textual Conventions
-- ****************************************************************************
-- ****************************************************************************
-- ntWlanApSys - Standard Mib elements
-- ****************************************************************************
ntWlanSwHardwareVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Hardware version of the main board."
::= { ntWlanApSys 1 }
ntWlanSwBootRomVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Boot ROM code version of the main board."
::= { ntWlanApSys 2 }
ntWlanSwOpCodeVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operation code version of the main board."
::= { ntWlanApSys 3 }
ntWlanSwCountryCode OBJECT-TYPE
SYNTAX DisplayString (SIZE(2))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Country code of the AP.
AL-ALBANIA, DZ-ALGERIA,
AR-ARGENTINA, AM-ARMENIA,
AU-AUSTRALIA, AT-AUSTRIA,
AZ-AZERBAIJAN, BH-BAHRAIN,
BY-BELARUS, BE-BELGIUM,
BZ-BELIZE, BO-BOLVIA,
BR-BRAZIL, BN-BRUNEI_DARUSSALAM,
BG-BULGARIA, CA-CANADA,
CL-CHILE, CN-CHINA,
CO-COLOMBIA, CR-COSTA_RICA,
HR-CROATIA, CY-CYPRUS,
CZ-CZECH_REPUBLIC, DK-DENMARK,
DO-DOMINICAN_REPUBLIC, EC-ECUADOR,
EG-EGYPT, EE-ESTONIA,
FI-FINLAND, FR-FRANCE,
GE-GEORGIA, DE-GERMANY,
GR-GREECE, GT-GUATEMALA,
HK-HONG_KONG, HU-HUNGARY,
IS-ICELAND, IN-INDIA,
ID-INDONESIA, IR-IRAN,
IE-IRELAND, IL-ISRAEL,
IT-ITALY, JP-JAPAN,
JO-JORDAN, KZ-KAZAKHSTAN,
KP-NORTH_KOREA, KR-KOREA_REPUBLIC,
KW-KUWAIT, LV-LATVIA,
LB-LEBANON, LI-LIECHTENSTEIN,
LT-LITHUANIA, LU-LUXEMBOURG,
MO-MACAU, MK-MACEDONIA,
MY-MALAYSIA, MX-MEXICO,
MC-MONACO, MA-MOROCCO,
NL-NETHERLANDS, NZ-NEW_ZEALAND,
NO-NORWAY, OM-OMAN,
PK-PAKISTAN, PA-PANAMA,
PE-PERU, PH-PHILIPPINES,
PL-POLAND, PT-PORTUGAL,
PR-PUERTO_RICO, QA-QATAR,
RO-ROMANIA, RU-RUSSIA,
SA-SAUDI_ARABIA, SG-SINGAPORE,
SK-SLOVAK_REPUBLIC, SI-SLOVENIA,
ZA-SOUTH_AFRICA, ES-SPAIN,
SE-SWEDEN, CH-SWITZERLAND,
SY-SYRIA, TW-TAIWAN,
TH-THAILAND, TR-TURKEY,
UA-UKRAINE, AE-UNITED_ARAB_EMIRATES,
GB-UNITED_KINGDOM, US-UNITED_STATES,
UY-URUGUAY, VE-VENEZUELA,
VN-VIETNAM"
::= { ntWlanApSys 4 }
ntWlanSwNNDataFileVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Nortel Networks Customization Data File Version."
::= { ntWlanApSys 5 }
-- ****************************************************************************
-- enterpriseApLine AP Line elements
-- ****************************************************************************
ntWlanLineTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtWlanLineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of descriptive and status information about
configuration of each RS-232 line in this system"
::= { ntWlanApLineMgnt 1 }
ntWlanLineEntry OBJECT-TYPE
SYNTAX NtWlanLineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, containing information
about configuration in one RS232 line of the Access
Point."
INDEX { ntWlanLineIndex }
::= { ntWlanLineTable 1 }
NtWlanLineEntry ::= SEQUENCE
{
ntWlanLineIndex Integer32,
ntWlanLineDataBits Integer32,
ntWlanLineParity INTEGER,
ntWlanLineSpeed Integer32,
ntWlanLineStopBits Integer32
}
ntWlanLineIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is defined as RS-232 index."
::= { ntWlanLineEntry 1 }
ntWlanLineDataBits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This is defined as number of data bits for the RS232
interface."
::= { ntWlanLineEntry 2 }
ntWlanLineParity OBJECT-TYPE
SYNTAX INTEGER
{
none(99),
odd(1),
even(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This is defined as parity of the RS232 interface."
::= { ntWlanLineEntry 3 }
ntWlanLineSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This is defined as the speed of the RS-232 interface."
::= { ntWlanLineEntry 4 }
ntWlanLineStopBits OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This is defined as the number of stop bits for the RS-232
interface."
::= { ntWlanLineEntry 5 }
-- ****************************************************************************
-- ntWlanApPortMgnt - Port Mib elements
-- ****************************************************************************
ntWlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtWlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of descriptive and status information about
configuration of each switch port (including expansion
slot) in this system. This table also contains information
about each trunk (similar to Cisco's EtherChannel)."
::= { ntWlanApPortMgnt 1 }
ntWlanPortEntry OBJECT-TYPE
SYNTAX NtWlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, containing information
about configuration in one switch port of the switch."
INDEX { ntWlanPortIndex }
::= { ntWlanPortTable 1 }
NtWlanPortEntry ::= SEQUENCE
{
ntWlanPortIndex InterfaceIndex,
ntWlanPortName DisplayString,
ntWlanPortType INTEGER,
ntWlanPortSpeedDpxCfg INTEGER,
ntWlanPortFlowCtrlCfg INTEGER,
ntWlanPortCapabilities INTEGER,
ntWlanPortAutonegotiation INTEGER,
ntWlanPortSpeedDpxStatus INTEGER,
ntWlanPortFlowCtrlStatus INTEGER
}
ntWlanPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is defined as ifIndex in the IF-MIB."
::= { ntWlanPortEntry 1 }
ntWlanPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the port name. This is same as
ifAlias in the IF-MIB (RFC2863 or later)."
::= { ntWlanPortEntry 2 }
ntWlanPortType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
hundredBaseTX(2),
hundredBaseFX(3),
thousandBaseSX(4),
thousandBaseLX(5),
thousandBaseT(6),
thousandBaseGBIC(7),
thousandBaseMiniGBIC(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the port type."
::= { ntWlanPortEntry 3 }
ntWlanPortSpeedDpxCfg OBJECT-TYPE
SYNTAX INTEGER
{
reserved(1),
halfDuplex10(2),
fullDuplex10(3),
halfDuplex100(4),
fullDuplex100(5),
halfDuplex1000(6),
fullDuplex1000(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Set the port speed and duplex mode as follows:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100Mbps and full duplex mode
halfDuplex1000(6) - 1000Mbps and half duplex mode
fullDuplex1000(7) - 1000Mbps and full duplex mode
hundredBaseTX port can be set as
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
hundredBaseFX port can be set as
halfDuplex100(4)
fullDuplex100(5)
thousandBaseSX port can be set as
halfDuplex1000(6)
fullDuplex1000(7)
The actual operating speed and duplex of the port
is given by portSpeedDpxStatus."
DEFVAL { halfDuplex10 }
::= { ntWlanPortEntry 4 }
ntWlanPortFlowCtrlCfg OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2),
backPressure(3),
dot3xFlowControl(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "(1) Flow control mechanism is enabled.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, the port
uses IEEE 802.3x flow control mechanism.
If the port type is hundredBaseFX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, Flow
control mechanism will not function.
(2) Flow control mechanism is disabled.
(3) Flow control mechanism is backPressure.
when the port is in fullDuplex mode.This flow control
mechanism will not function.
(4) Flow control mechanism is IEEE 802.3x flow control.
when the port is in halfDuplex mode.This flow control
mechanism will not function.
hundredBaseTX and thousandBaseSX port can be set as:
enabled(1),
disabled(2),
backPressure(3),
dot3xFlowControl(4).
hundredBaseFX port can be set as:
enabled(1),
disabled(2),
backPressure(3).
The actual flow control mechanism is used given by
portFlowCtrlStatus."
DEFVAL { enabled }
::= { ntWlanPortEntry 5 }
ntWlanPortCapabilities OBJECT-TYPE
-- INTEGER should be bits
SYNTAX INTEGER
{
portCap10half(99),
portCap10full(1),
portCap100half(2),
portCap100full(3),
portCap1000half(4),
portCap1000full(5),
reserved6(6),
reserved7(7),
reserved8(8),
reserved9(9),
reserved10(10),
reserved11(11),
reserved12(12),
reserved13(13),
portCapSym(14),
portCapFlowCtrl(15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port capabilities."
::= { ntWlanPortEntry 6 }
ntWlanPortAutonegotiation OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Whether autonegotiation is enabled."
::= { ntWlanPortEntry 7 }
ntWlanPortSpeedDpxStatus OBJECT-TYPE
SYNTAX INTEGER
{
error(1),
halfDuplex10(2),
fullDuplex10(3),
halfDuplex100(4),
fullDuplex100(5),
halfDuplex1000(6),
fullDuplex1000(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operating speed and duplex mode of the
switched port. If this index is a trunk,
the speed is the speed of its individual members.
If this index is a trunk and the result
is inconsistent among its member ports, this value is
error(1)."
::= { ntWlanPortEntry 8 }
ntWlanPortFlowCtrlStatus OBJECT-TYPE
SYNTAX INTEGER
{
error(1),
backPressure(2),
dot3xFlowControl(3),
none(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "(2) BackPressure flow control machanism is used.
(3) IEEE 802.3 flow control machanism is used.
(4) Flow control mechanism is disabled.
If this index is a trunk and the result
is inconsistent among its member ports, this value is
error(1)."
::= { ntWlanPortEntry 9 }
-- ****************************************************************************
-- ntWlanApTftpMgt - File Transfer Mib elements
-- ****************************************************************************
ntWlanTransferStart OBJECT-TYPE
SYNTAX INTEGER {
go(1),
nogo(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to go(1) to start a transfer."
::= { ntWlanApFileTransferMgt 1 }
ntWlanTransferType OBJECT-TYPE
SYNTAX INTEGER {
ftpDownload(1),
tftpDownload(2),
ftpUpload(3),
tftpUpload(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of file to transfer."
::= { ntWlanApFileTransferMgt 2 }
ntWlanFileType OBJECT-TYPE
SYNTAX INTEGER {
firmware(1),
config(2),
nortelConfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of file to transfer."
::= { ntWlanApFileTransferMgt 3 }
ntWlanSrcFile OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source file name for TFTP transfer when a
transfer is next requested via this MIB. This value is set to
the zero length string when no file name has been specified."
::= { ntWlanApFileTransferMgt 4 }
ntWlanDestFile OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination file name for TFTP transfer when a
transfer is next requested via this MIB. This value is set to
the zero length string when no file name has been specified."
::= { ntWlanApFileTransferMgt 5 }
ntWlanFileServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the TFTP server for transfer
when a download is next requested via this MIB.
This value is set to `0.0.0.0' when no IP address has been
specified."
::= { ntWlanApFileTransferMgt 6 }
ntWlanUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The username specified for an FTP Transfer."
::= { ntWlanApFileTransferMgt 7 }
ntWlanPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password specified for an FTP Transfer."
::= { ntWlanApFileTransferMgt 8 }
ntWlanFileTransferStatus OBJECT-TYPE
SYNTAX INTEGER {
none(1),
inProgress(2),
success(3),
fail(4),
invalidSource(5),
invalidDestination(6),
outOfMemory(7),
outOfSpace(8),
fileNotFound(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the current FTP Transfer process."
::= { ntWlanApFileTransferMgt 9 }
-- ****************************************************************************
-- ntWlanApResetMgt - Reset Mib elements
-- ****************************************************************************
ntWlanRestartOpCodeFile OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of op-code file for start-up."
::= { ntWlanApResetMgt 1 }
ntWlanRestartControl OBJECT-TYPE
SYNTAX INTEGER {
running(1),
warmBoot(2),
coldBoot(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to warmBoot(2) causes the device to
restart the application software with current configuration
parameters saved in non-volatile memory. Setting this
object to coldBoot(3) causes the device to reinitialize
configuration parameters in non-volatile memory to default
values and restart the application software. When the device
is running normally, this variable has a value of
running(1)."
::= { ntWlanApResetMgt 2 }
-- ****************************************************************************
-- ntWlanApIpMgnt - Ip Mib elements
-- ****************************************************************************
ntWlanNetConfigIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask are 0.0.0.0, then when the device
boots, it may use DHCP to try to figure out what these
values should be. If DHCP fails, before the device
can talk on the network, this value must be configured
(e.g., through a terminal attached to the device)."
::= { ntWlanApIpMgt 1 }
ntWlanNetConfigSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subnet mask of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask are 0.0.0.0, then when the device
boots, it may use DHCP to try to figure out what these
values should be. If DHCP fails, before the device
can talk on the network, this value must be configured
(e.g., through a terminal attached to the device)."
::= { ntWlanApIpMgt 2 }
ntWlanNetDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Address of the default gateway. If this value is
undefined or unknown, it shall have the value 0.0.0.0."
::= { ntWlanApIpMgt 3 }
ntWlanIpHttpState OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether HTTP is enabled."
::= { ntWlanApIpMgt 4 }
ntWlanIpHttpPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number for HTTP."
::= { ntWlanApIpMgt 5 }
-- **********************************************************************
-- * End of ntWlanDot11OperationTable TABLE
-- **********************************************************************
-- PHY Attributes
ntWlanDot11Phy OBJECT IDENTIFIER ::= { ntWlanApDot11 4 }
-- **********************************************************************
-- * ntWlanDot11PhyOperationEntry TABLE
-- **********************************************************************
ntWlanDot11PhyOperationTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtWlanDot11PhyOperationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of descriptive and status information about
configuration of each radio of the AP."
::= { ntWlanDot11Phy 1 }
ntWlanDot11PhyOperationEntry OBJECT-TYPE
SYNTAX NtWlanDot11PhyOperationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, containing information
about configuration in one radio of the AP."
INDEX { ntWlanDot11Index }
::= { ntWlanDot11PhyOperationTable 1 }
NtWlanDot11PhyOperationEntry ::= SEQUENCE
{
ntWlanDot11Index Integer32,
ntWlanDot11TurboModeEnabled INTEGER,
ntWlanDot11PreambleLength INTEGER,
ntWlanDot11dWorldModeEnabled TruthValue,
ntWlanDot11ClosedSystem TruthValue
}
ntWlanDot11Index OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Radio index of the AP."
::= { ntWlanDot11PhyOperationEntry 1 }
ntWlanDot11TurboModeEnabled OBJECT-TYPE
SYNTAX INTEGER {
none(99),
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute, when true, shall indicate that the nortel's
propietory turbo mode option is enabled. The default value of
this attribute shall be false."
::= { ntWlanDot11PhyOperationEntry 3 }
ntWlanDot11PreambleLength OBJECT-TYPE
SYNTAX INTEGER {
twelveSymbols(99),
short(1),
long(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute determines whether or not a short or a long
preamble is used to delineate 802.11 frames."
::= { ntWlanDot11PhyOperationEntry 4 }
ntWlanDot11dWorldModeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute determines whether 802.11d world mode is
enabled for this radio."
::= { ntWlanDot11PhyOperationEntry 5 }
ntWlanDot11ClosedSystem OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute determines whether the radio operates as a
closed system. When configured as a closed system, the
SSID is not included when broadcasting periodic beacon
frames."
::= { ntWlanDot11PhyOperationEntry 6 }
-- **********************************************************************
-- * End of ntWlanDot11PhyOperationEntry TABLE
-- **********************************************************************
-- **********************************************************************
-- * ntWlanDot11AuthenticationEntry TABLE
-- **********************************************************************
ntWlanDot11AuthenticationEntry OBJECT IDENTIFIER ::= { ntWlanApDot11 5 }
ntWlanDot118021xSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute, when true(1), indicates that the Enterprise
Access Point supports the 802.1x authentication algorithm."
::= { ntWlanDot11AuthenticationEntry 1 }
ntWlanDot118021xRequired OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute, when true(1), indicates that the Enterprise
Access Point requires successful 802.1x authentication
for any clients accessing the network."
::= { ntWlanDot11AuthenticationEntry 2 }
ntWlanDot118021xBcastKeyRefresh OBJECT-TYPE
SYNTAX Integer32 (0..1440)
UNITS "Minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The broadcast key refresh rate."
::= { ntWlanDot11AuthenticationEntry 3 }
ntWlanDot118021xSessKeyRefresh OBJECT-TYPE
SYNTAX Integer32 (0..1440)
UNITS "Minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The session key refresh rate."
::= { ntWlanDot11AuthenticationEntry 4 }
ntWlanDot118021xReAuthRefresh OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "Seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The re-authentication refresh rate."
::= { ntWlanDot11AuthenticationEntry 5 }
-- **********************************************************************
-- * End of ntWlanDot11Authentication TABLE
-- **********************************************************************
-- **********************************************************************
-- * ntWlanDot11AuthenticationServer TABLE
-- **********************************************************************
ntWlanDot11AuthenticationServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtWlanDot11AuthenticationServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of descriptive and status information about
configuration of each authentication server."
::= { ntWlanApDot11 6 }
ntWlanDot11AuthenticationServerEntry OBJECT-TYPE
SYNTAX NtWlanDot11AuthenticationServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, containing information
about configuration in one radio of the AP."
INDEX { ntWlanDot11ServerIndex }
::= { ntWlanDot11AuthenticationServerTable 1 }
NtWlanDot11AuthenticationServerEntry ::= SEQUENCE
{
ntWlanDot11ServerIndex Integer32,
ntWlanDot11AuthenticationServer IpAddress,
ntWlanDot11AuthenticationPort INTEGER,
ntWlanDot11AuthenticationKey DisplayString,
ntWlanDot11AuthenticationRetransmit INTEGER,
ntWlanDot11AuthenticationTimeout INTEGER,
ntWlanDot11SecondaryAuthServer IpAddress,
ntWlanDot11SecondaryAuthPort INTEGER,
ntWlanDot11SecondaryAuthKey DisplayString,
ntWlanDot11SecondaryAuthRetransmit INTEGER,
ntWlanDot11SecondaryAuthTimeout INTEGER
}
ntWlanDot11ServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Radio index of the AP."
::= { ntWlanDot11AuthenticationServerEntry 1 }
ntWlanDot11AuthenticationServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This values indicates the IP address of the
authentication server."
::= { ntWlanDot11AuthenticationServerEntry 2 }
ntWlanDot11AuthenticationPort OBJECT-TYPE
SYNTAX INTEGER (1024..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This values indicates the UDP Port used by the primary
authentication server."
::= { ntWlanDot11AuthenticationServerEntry 3 }
ntWlanDot11AuthenticationKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This values indicates the shared key used by the
authentication server."
::= { ntWlanDot11AuthenticationServerEntry 4 }
ntWlanDot11AuthenticationRetransmit OBJECT-TYPE
SYNTAX INTEGER (1..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This values indicates the retransmit timer length used by the
authentication server."
::= { ntWlanDot11AuthenticationServerEntry 5 }
ntWlanDot11AuthenticationTimeout OBJECT-TYPE
SYNTAX INTEGER (1..60)
UNITS "Seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This values indicates the Timeout value(sec) used by the
authentication server."
::= { ntWlanDot11AuthenticationServerEntry 6 }
ntWlanDot11SecondaryAuthServer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This values indicates the IP address of the
secondary authentication server."
::= { ntWlanDot11AuthenticationServerEntry 7 }
ntWlanDot11SecondaryAuthPort OBJECT-TYPE
SYNTAX INTEGER (1024..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This values indicates the UDP Port used by the primary
secondary authentication server."
::= { ntWlanDot11AuthenticationServerEntry 8 }
ntWlanDot11SecondaryAuthKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This values indicates the shared key used by the
secondary authentication server."
::= { ntWlanDot11AuthenticationServerEntry 9 }
ntWlanDot11SecondaryAuthRetransmit OBJECT-TYPE
SYNTAX INTEGER (1..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This values indicates the retransmit timer length used by the
secondary authentication server."
::= { ntWlanDot11AuthenticationServerEntry 10 }
ntWlanDot11SecondaryAuthTimeout OBJECT-TYPE
SYNTAX INTEGER (1..60)
UNITS "Seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This values indicates the Timeout value(sec) used by the
secondary authentication server."
::= { ntWlanDot11AuthenticationServerEntry 11 }
-- **********************************************************************
-- * End of ntWlanDot11AuthenticationServer TABLE
-- **********************************************************************
-- **********************************************************************
-- * ntWlanDot11FilteringTable TABLE
-- **********************************************************************
ntWlanDot11FilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtWlanDot11FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of status information about
each configured MAC Address Filtering Entry."
::= { ntWlanApDot11 7 }
ntWlanDot11FilterEntry OBJECT-TYPE
SYNTAX NtWlanDot11FilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, containing information
about configuration in one radio of the AP."
INDEX { ntWlanDot11FilterIndex }
::= { ntWlanDot11FilterTable 1 }
NtWlanDot11FilterEntry ::= SEQUENCE
{
ntWlanDot11FilterIndex Integer32,
ntWlanDot11FilterAddress PhysAddress,
ntWlanDot11FilterStatus INTEGER
}
ntWlanDot11FilterIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Filter index."
::= { ntWlanDot11FilterEntry 1 }
ntWlanDot11FilterAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This values indicates the MAC address of the
filter entry."
::= { ntWlanDot11FilterEntry 2 }
ntWlanDot11FilterStatus OBJECT-TYPE
SYNTAX INTEGER
{
allowed(30),
denied(31)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This values indicates the Status of the filter entry.
Ifallowed, the client is allowed access to the network.
If disallowed, the no frames will be forwarded to the
network from the client."
::= { ntWlanDot11FilterEntry 3 }
-- **********************************************************************
-- * End of ntWlanDot11FilteringTable TABLE
-- **********************************************************************
-- **********************************************************************
-- * ntWlanDot11TrapTable TABLE
-- **********************************************************************
ntWlanDot11TrapTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtWlanDot11TrapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of status information for Association and
Disassociation Trap"
::= { ntWlanApDot11 9 }
ntWlanDot11TrapEntry OBJECT-TYPE
SYNTAX NtWlanDot11TrapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, containing information
for the association and disassociation trap."
INDEX { ntWlanDot11InterfaceIndex }
::= { ntWlanDot11TrapTable 1 }
NtWlanDot11TrapEntry ::= SEQUENCE
{
ntWlanDot11InterfaceIndex Integer32,
ntWlanDot11AssociationStationAddress PhysAddress,
ntWlanDot11DisassociationStationAddress PhysAddress,
ntWlanDot11AssociationMU INTEGER
}
ntWlanDot11InterfaceIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Interface index."
::= { ntWlanDot11TrapEntry 1 }
ntWlanDot11AssociationStationAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This values indicates the MAC address of the Mobile Unit
associating with this Access Point."
::= { ntWlanDot11TrapEntry 2 }
ntWlanDot11DisassociationStationAddress OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This values indicates the MAC address of the Mobile Unit
no longer associated with this Access Point."
::= { ntWlanDot11TrapEntry 3 }
ntWlanDot11AssociationMU OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This values indicates the number of Mobile Units associated
on the Interface"
::= { ntWlanDot11TrapEntry 4 }
-- **********************************************************************
-- * End of ntWlanDot11TrapTable TABLE
-- **********************************************************************
-- **********************************************************************
-- * Notification Definitions
-- **********************************************************************
ntWlanApTraps0 OBJECT IDENTIFIER ::= { ntWlanApTraps 0 }
ntWlanApDot1xAuthenticationFail NOTIFICATION-TYPE
OBJECTS {
ifPhysAddress,
ntWlanDot11AssociationStationAddress
}
STATUS current
DESCRIPTION
"Indicates that a Mobile Unit failed 802.1x authentication.
- ifPhysAddress is the MAC address of the Access Point
sending this trap message.
- ntWlanDot11AssociationStationAddress is the MAC address
of the Mobile Unit."
::= { ntWlanApTraps0 101 }
ntWlanApMuAssocTrap NOTIFICATION-TYPE
OBJECTS {
ifPhysAddress,
ntWlanDot11AssociationStationAddress,
ntWlanDot11AssociationMU
}
STATUS current
DESCRIPTION
"Indicates that there is a Mobile Unit associating
with this Access Point.
- ifPhysAddress is the MAC address of the Access Point
sending this trap message.
- ntWlanDot11AssociationStationAddress is the MAC address of the
Mobile Unit.
Note: If two or more Mobile Units associate with the
Access Point at the same time, ntWlanDot11AssociationStationAddress
belongs to the last Mobile Unit.
- ntWlanDot11AssociationMU is the number of Mobile Units currently
associating with this Access Point."
::= { ntWlanApTraps0 111 }
ntWlanApMuDisAssocTrap NOTIFICATION-TYPE
OBJECTS {
ifPhysAddress,
ntWlanDot11DisassociationStationAddress,
ntWlanDot11AssociationMU
}
STATUS current
DESCRIPTION
"Indicates that there is one Mobile Unit no longer
associating with this Access Point anymore.
- ifPhysAddress is the MAC address of the Access Point
sending this trap message.
- ntWlanDot11DisassociationStationAddress is the MAC address of the
Mobile Unit.
Note: If two or more Mobile Units un-associate with
the Access Point at the same time,
ntWlanDot11DisassociationStationAddress belongs to the last
Mobile Unit.
- ntWlanDot11AssociationMU is the number of Mobile Units currently
associating with this Access Point."
::= { ntWlanApTraps0 112 }
ntWlanApMuWEPAuthFail NOTIFICATION-TYPE
OBJECTS {
ifIndex,
ntWlanDot11AssociationStationAddress
}
STATUS current
DESCRIPTION
"Indicates that WEP authentication of a Mobile Unit failed.
- ifIndex identifies the radio to which the MU attempted to connect.
- ntWlanDot11AssociationStationAddress is the MAC address of the
Mobile Unit that attempted to connect."
::= { ntWlanApTraps0 113 }
ntWlanApMuWPAAuthFail NOTIFICATION-TYPE
OBJECTS {
ifIndex,
ntWlanDot11AssociationStationAddress
}
STATUS current
DESCRIPTION
"Indicates that WPA authentication of a Mobile Unit failed.
- ifIndex identifies the radio to which the MU attempted to connect.
- ntWlanDot11AssociationStationAddress is the MAC address of the
Mobile Unit that attempted to connect."
::= { ntWlanApTraps0 114 }
-- **********************************************************************
-- * End of Notifications section
-- **********************************************************************
-- **********************************************************************
-- * Notification Control Objects
-- **********************************************************************
ntWlanApMuAssocTrapEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object controls whether ntWlanApMuAssocTrap
notifications will be generated when an MU
associates with the AP. If this object is true(1),
then the notification will be generated. If it is
false, the notification will not be generated."
::= { ntWlanApTraps 1 }
ntWlanApMuDisAssocTrapEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object controls whether ntWlanApMuDisAssocTrap
notifications will be generated when an MU
disassociates from the AP. If this object is true(1),
then the notification will be generated. If it is
false, the notification will not be generated."
::= { ntWlanApTraps 2 }
-- **********************************************************************
-- * End of Notification Control Objects
-- **********************************************************************
-- ****************************************************************************
-- ntWlanApLID - Objects for ethernet/IP(ping) link integrity detection
-- ****************************************************************************
ntWlanApLIDCheckEtherLinkEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates whether checks for ethernet link integrity are
enabled."
::= { ntWlanApLID 1 }
ntWlanApLIDCheckIPLinkEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates whether checks for IP link integrity are
enabled."
::= { ntWlanApLID 2 }
ntWlanApLIDCheckIpLinkAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address to ping to check IP link integrity."
::= { ntWlanApLID 3 }
-- ****************************************************************************
-- End of ntWlanApLID group
-- ****************************************************************************
-- ****************************************************************************
-- ntWlanApRateSupport - Objects for controlling basic and supported rates
-- ****************************************************************************
ntWlanApRateSupportTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtWlanApRateSupportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table to configure which hardware-supported rates are
actively supported, and which are basic rates required
for an MU to connect to an AP. Entries must exist in
this table for every hardware-supported rate for each
appropriate ifIndex value."
::= { ntWlanApRateSupport 1 }
ntWlanApRateSupportEntry OBJECT-TYPE
SYNTAX NtWlanApRateSupportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the ntWlanApRateSupportTable."
INDEX { ntWlanApRateSupportIfIndex, ntWlanApRateSupportSpeed }
::= { ntWlanApRateSupportTable 1 }
NtWlanApRateSupportEntry ::= SEQUENCE
{
ntWlanApRateSupportIfIndex InterfaceIndex,
ntWlanApRateSupportSpeed NtWlanApDataRate,
ntWlanApRateSupportLevel INTEGER
}
ntWlanApRateSupportIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ifIndex value of the radio."
::= { ntWlanApRateSupportEntry 1 }
ntWlanApRateSupportSpeed OBJECT-TYPE
SYNTAX NtWlanApDataRate
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A supported data rate."
::= { ntWlanApRateSupportEntry 2 }
ntWlanApRateSupportLevel OBJECT-TYPE
SYNTAX INTEGER {
off(0),
supported(1),
supportedBasic(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether a specific rate is currently
supported, and if so, whether it is a basic rate.
off - indicates that this rate is not currently
supported.
supported - indicates that this rate is currently
supported, but is not required to be supported
by an MU in order to connect to this radio.
supportedBasic - indicates that this rate is currently
supported as a basic rate, and an MU must also
support this rate in order to connect to this
radio."
::= { ntWlanApRateSupportEntry 3 }
-- ****************************************************************************
-- End of ntWlanApRateSupport group
-- ****************************************************************************
-- ****************************************************************************
-- ntWlanApSecurity - Objects for controlling WEP and WPA security
-- ****************************************************************************
ntWlanApSecurityTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtWlanApSecurityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table to configure WEP and WPA security parameters.
Entries are per-radio."
::= { ntWlanApSecurity 1 }
ntWlanApSecurityEntry OBJECT-TYPE
SYNTAX NtWlanApSecurityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the ntWlanApSecurityTable."
INDEX { ntWlanApSecurityIfIndex }
::= { ntWlanApSecurityTable 1 }
NtWlanApSecurityEntry ::= SEQUENCE
{
ntWlanApSecurityIfIndex InterfaceIndex,
ntWlanApSecurityEnabled TruthValue,
ntWlanApSecurityWEPAuthType INTEGER,
ntWlanApSecurityWEPKeyLength INTEGER,
ntWlanApSecurityWEPActiveKey Integer32,
ntWlanApSecurityWEPKey1 NtWlanApWEPKey,
ntWlanApSecurityWEPKey2 NtWlanApWEPKey,
ntWlanApSecurityWEPKey3 NtWlanApWEPKey,
ntWlanApSecurityWEPKey4 NtWlanApWEPKey,
ntWlanApSecurityWPASupport INTEGER,
ntWlanApSecurityWPAMode INTEGER,
ntWlanApSecurityWPAPreSharedKey OCTET STRING,
ntWlanApSecurityWPAMcastCypherMode INTEGER
}
ntWlanApSecurityIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ifIndex value of the radio."
::= { ntWlanApSecurityEntry 1 }
ntWlanApSecurityEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates whether security is enabled for a radio."
::= { ntWlanApSecurityEntry 2 }
ntWlanApSecurityWEPAuthType OBJECT-TYPE
SYNTAX INTEGER {
openSystem(0),
sharedKey(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The WEP authentication type."
::= { ntWlanApSecurityEntry 3 }
ntWlanApSecurityWEPKeyLength OBJECT-TYPE
SYNTAX INTEGER {
wepKey64(0),
wepKey128(1),
wepKey152(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the WEP key length being used."
::= { ntWlanApSecurityEntry 4 }
ntWlanApSecurityWEPActiveKey OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates which WEP key is currently in use."
::= { ntWlanApSecurityEntry 5 }
ntWlanApSecurityWEPKey1 OBJECT-TYPE
SYNTAX NtWlanApWEPKey
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The first WEP key. Retrieval of this object will
always return an empty string."
::= { ntWlanApSecurityEntry 6 }
ntWlanApSecurityWEPKey2 OBJECT-TYPE
SYNTAX NtWlanApWEPKey
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The second WEP key. Retrieval of this object will
always return an empty string."
::= { ntWlanApSecurityEntry 7 }
ntWlanApSecurityWEPKey3 OBJECT-TYPE
SYNTAX NtWlanApWEPKey
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The third WEP key. Retrieval of this object will
always return an empty string."
::= { ntWlanApSecurityEntry 8 }
ntWlanApSecurityWEPKey4 OBJECT-TYPE
SYNTAX NtWlanApWEPKey
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The fourth WEP key. Retrieval of this object will
always return an empty string."
::= { ntWlanApSecurityEntry 9 }
ntWlanApSecurityWPASupport OBJECT-TYPE
SYNTAX INTEGER {
supported(1),
required(2),
wepOnly(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates whether WPA security is supported."
::= { ntWlanApSecurityEntry 10 }
ntWlanApSecurityWPAMode OBJECT-TYPE
SYNTAX INTEGER {
dynamic(0),
preSharedKey(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The WPA mode."
::= { ntWlanApSecurityEntry 11 }
ntWlanApSecurityWPAPreSharedKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The WPA pre-shared key."
::= { ntWlanApSecurityEntry 12 }
ntWlanApSecurityWPAMcastCypherMode OBJECT-TYPE
SYNTAX INTEGER {
wep(0),
tkip(1),
aes(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The multicast cypher mode."
::= { ntWlanApSecurityEntry 13 }
-- ****************************************************************************
-- End of ntWlanApSecurity group
-- ****************************************************************************
-- ****************************************************************************
-- ntWlanApQoS - Objects for controlling QoS
-- ****************************************************************************
ntWlanApQoSMode OBJECT-TYPE
SYNTAX INTEGER {
off(0),
etherSrc(1),
etherDst(2),
ethertype(3),
directPriorityMap(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates the QoS mode being used.
off - indicates QoS features are disabled.
etherSrc - indicates that the ethernet source MAC
address of received packets is mapped to an
egress queue.
etherDst - indicates that the ethernet destination
MAC address of received packets is mapped to an
egress queue.
etherType - indicates that the ethernet type of
of received packets is mapped to an egress
queue.
directPriorityMap - indicates that the priority
value of received packets is used to map directly
to an egress queue."
::= { ntWlanApQoS 1 }
ntWlanApQoSEtherTypeToQueueTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtWlanApQoSEtherTypeToQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table to configure mappings from ethernet type
to queue number."
::= { ntWlanApQoS 2 }
ntWlanApQoSEtherTypeToQueueEntry OBJECT-TYPE
SYNTAX NtWlanApQoSEtherTypeToQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the ntWlanApQoSTable."
INDEX { ntWlanApQoSEtherTypeToQueueIndex }
::= { ntWlanApQoSEtherTypeToQueueTable 1 }
NtWlanApQoSEtherTypeToQueueEntry ::= SEQUENCE
{
ntWlanApQoSEtherTypeToQueueIndex Integer32,
ntWlanApQoSEtherTypeToQueueNumber Integer32,
ntWlanApQoSEtherTypeToQueueRowStatus RowStatus
}
ntWlanApQoSEtherTypeToQueueIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An ethernet type, to be mapped to a queue."
::= { ntWlanApQoSEtherTypeToQueueEntry 1 }
ntWlanApQoSEtherTypeToQueueNumber OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The queue number to which the ether type is mapped."
::= { ntWlanApQoSEtherTypeToQueueEntry 2 }
ntWlanApQoSEtherTypeToQueueRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object is used to create and destroy entries in
this table."
::= { ntWlanApQoSEtherTypeToQueueEntry 3 }
ntWlanApQoSMACToQueueTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtWlanApQoSMACToQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table to configure mappings from ethernet MAC address
to queue number."
::= { ntWlanApQoS 3 }
ntWlanApQoSMACToQueueEntry OBJECT-TYPE
SYNTAX NtWlanApQoSMACToQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the ntWlanApQoSTable."
INDEX { ntWlanApQoSMACToQueueAddress }
::= { ntWlanApQoSMACToQueueTable 1 }
NtWlanApQoSMACToQueueEntry ::= SEQUENCE
{
ntWlanApQoSMACToQueueAddress MacAddress,
ntWlanApQoSMACToQueueNumber Integer32,
ntWlanApQoSMACToQueueRowStatus RowStatus
}
ntWlanApQoSMACToQueueAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An ethernet MAC address, to be mapped to a queue."
::= { ntWlanApQoSMACToQueueEntry 1 }
ntWlanApQoSMACToQueueNumber OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The queue number to which the MAC address is mapped."
::= { ntWlanApQoSMACToQueueEntry 2 }
ntWlanApQoSMACToQueueRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object is used to create and destroy entries in
this table."
::= { ntWlanApQoSMACToQueueEntry 3 }
-- ****************************************************************************
-- End of ntWlanApQoS group
-- ****************************************************************************
-- ****************************************************************************
-- ntWlanApVlan - Objects for controlling Vlan
-- ****************************************************************************
ntWlanApVlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether Vlan support is enabled."
::= { ntWlanApVlan 1 }
ntWlanApVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtWlanApVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table to configure the default VID per-radio."
::= { ntWlanApVlan 2 }
ntWlanApVlanEntry OBJECT-TYPE
SYNTAX NtWlanApVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the ntWlanApVlanTable."
INDEX { ntWlanApVlanIfIndex }
::= { ntWlanApVlanTable 1 }
NtWlanApVlanEntry ::= SEQUENCE
{
ntWlanApVlanIfIndex InterfaceIndex,
ntWlanApVlanDefaultVid Integer32
}
ntWlanApVlanIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ifIndex value of the radio."
::= { ntWlanApVlanEntry 1 }
ntWlanApVlanDefaultVid OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The default VID of the radio."
::= { ntWlanApVlanEntry 2 }
ntWlanApVlanMUMACToVidTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtWlanApVlanMUMACToVidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table containing mappings from Mobile Unit MAC
addresses to VLAN ID values."
::= { ntWlanApVlan 3 }
ntWlanApVlanMUMACToVidEntry OBJECT-TYPE
SYNTAX NtWlanApVlanMUMACToVidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the ntWlanApVlanMUMACToVidTable."
INDEX { ntWlanApVlanMUMACToVidAddress }
::= { ntWlanApVlanMUMACToVidTable 1 }
NtWlanApVlanMUMACToVidEntry ::= SEQUENCE
{
ntWlanApVlanMUMACToVidAddress MacAddress,
ntWlanApVlanMUMACToVidNumber Integer32
}
ntWlanApVlanMUMACToVidAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ethernet MAC address of a Mobile Unit."
::= { ntWlanApVlanMUMACToVidEntry 1 }
ntWlanApVlanMUMACToVidNumber OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The VID to which this Mobile Unit's MAC is mapped."
::= { ntWlanApVlanMUMACToVidEntry 2 }
-- ****************************************************************************
-- End of ntWlanApVlan group
-- ****************************************************************************
-- ****************************************************************************
-- ntWlanApStats - Objects for controlling Statistics
-- ****************************************************************************
ntWlanApMUStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtWlanApMUStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of per-Mobile Unit statistics."
::= { ntWlanApStats 1 }
ntWlanApMUStatsEntry OBJECT-TYPE
SYNTAX NtWlanApMUStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the ntWlanApMUStatsTable."
INDEX { ntWlanApMUStatsMUAddress }
::= { ntWlanApMUStatsTable 1 }
NtWlanApMUStatsEntry ::= SEQUENCE
{
ntWlanApMUStatsMUAddress MacAddress,
ntWlanApMUStatsPacketsIn Counter32,
ntWlanApMUStatsPacketsOut Counter32,
ntWlanApMUStatsOctetsIn Counter32,
ntWlanApMUStatsOctetsOut Counter32
}
ntWlanApMUStatsMUAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ethernet MAC address of the Mobile Unit."
::= { ntWlanApMUStatsEntry 1 }
ntWlanApMUStatsPacketsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A count of the packets received from this MU."
::= { ntWlanApMUStatsEntry 2 }
ntWlanApMUStatsPacketsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A count of the packets sent to this MU."
::= { ntWlanApMUStatsEntry 3 }
ntWlanApMUStatsOctetsIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A count of the octets received from this MU."
::= { ntWlanApMUStatsEntry 4 }
ntWlanApMUStatsOctetsOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A count of the octets sent to this MU."
::= { ntWlanApMUStatsEntry 5 }
-- ****************************************************************************
-- End of ntWlanApQoS group
-- ****************************************************************************
END
Reference in New Issue View Git Blame Copy Permalink