mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
Files
65f82ba00e4e21b47cdb0449eae558ab3d09851a
librenms-librenms/mibs/WLSX-USER-MIB

538 lines
14 KiB
Plaintext
Raw Blame History

-- ArubaOS 3.2.0.0_16376
-- vim:set ts=4 sw=4:
WLSX-USER-MIB DEFINITIONS ::= BEGIN
IMPORTS
TEXTUAL-CONVENTION,
MODULE-IDENTITY,
OBJECT-TYPE,
snmpModules,
Integer32,
Counter32,
IpAddress,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
TDomain,
DisplayString,
PhysAddress,
TAddress,
TimeInterval,
RowStatus,
StorageType,
TestAndIncr,
MacAddress,
TruthValue
FROM SNMPv2-TC
OBJECT-GROUP
FROM SNMPv2-CONF
ArubaAuthenticationMethods,
ArubaSubAuthenticationMethods,
ArubaPhyType
FROM ARUBA-TC
wlsxEnterpriseMibModules
FROM ARUBA-MIB
wlanESSID
FROM WLSX-WLAN-MIB;
wlsxUserMIB MODULE-IDENTITY
LAST-UPDATED "0704110326Z"
ORGANIZATION "Aruba Wireless Networks"
CONTACT-INFO
"Postal: 1322 Crossman Avenue
Sunnyvale, CA 94089
E-mail: dl-support@arubanetworks.com
Phone: +1 408 227 4500"
DESCRIPTION
"This MIB module defines MIB objects which provide
information about the users in an Aruba controller."
REVISION "0704110326Z"
DESCRIPTION
"The initial revision."
::= { wlsxEnterpriseMibModules 4 }
wlsxUserAllInfoGroup OBJECT IDENTIFIER ::= { wlsxUserMIB 1 }
-- wlsxUserAllInfoGroup contains information about the users in the controller.
wlsxTotalNumOfUsers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Total Number of the users.
"
::= { wlsxUserAllInfoGroup 1 }
wlsxUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This Table lists all the users (both wired and wireless) currently
connected to the controller. Users are identified by their MAC
address and IP address.
"
::= { wlsxUserAllInfoGroup 2 }
wlsxUserEntry OBJECT-TYPE
SYNTAX WlsxUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"User Entry"
INDEX { nUserPhyAddress, nUserIpAddress }
::= { wlsxUserTable 1 }
WlsxUserEntry ::=
SEQUENCE {
nUserPhyAddress MacAddress,
nUserIpAddress IpAddress,
nUserName DisplayString,
nUserRole DisplayString,
nUserUpTime TimeTicks,
nUserAuthenticationMethod ArubaAuthenticationMethods,
nUserSubAuthenticationMethod ArubaSubAuthenticationMethods,
nUserAuthServerName DisplayString,
nUserExtVPNAddress IpAddress,
nUserApLocation DisplayString,
nUserApBSSID MacAddress,
nUserIsOnHomeAgent TruthValue,
nUserHomeAgentIpAddress IpAddress,
nUserMobilityStatus INTEGER,
nUserHomeVlan Integer32,
nUserDefaultVlan Integer32,
nUserAssignedVlan Integer32,
nUserBWContractName DisplayString,
nUserBWContractUsage INTEGER,
nUserBWContractId Integer32,
nUserIsProxyArpEnabled TruthValue,
nUserCurrentVlan Integer32,
nUserIsWired TruthValue,
nUserConnectedSlot Integer32,
nUserConnectedPort Integer32,
nUserPhyType ArubaPhyType,
nUserMobilityDomainName DisplayString,
nUserUPBWContractName DisplayString,
nUserUPBWContractUsage INTEGER,
nUserUPBWContractId Integer32,
nUserDNBWContractName DisplayString,
nUserDNBWContractUsage INTEGER,
nUserDNBWContractId Integer32
}
nUserPhyAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
MAC address of the station from which the user connected to
the controller.
"
::= { wlsxUserEntry 1 }
nUserIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
IP Address of the user.
"
::= { wlsxUserEntry 2 }
nUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Name of the User.
"
::= { wlsxUserEntry 3 }
nUserRole OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Role configured for this user.
"
::= { wlsxUserEntry 4 }
nUserUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Time since the user connected to the controller.
"
::= { wlsxUserEntry 5 }
nUserAuthenticationMethod OBJECT-TYPE
SYNTAX ArubaAuthenticationMethods
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Authentication mechanism used by the user to connect to the
controller.
"
::= { wlsxUserEntry 6 }
nUserSubAuthenticationMethod OBJECT-TYPE
SYNTAX ArubaSubAuthenticationMethods
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Sub Authentication Method
"
::= { wlsxUserEntry 7 }
nUserAuthServerName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Name of the authentication server used to authenticate
the user.
"
::= { wlsxUserEntry 8 }
nUserExtVPNAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
External VPN IP Address, if this is a VPN user or 0.0.0.0 if not.
"
::= { wlsxUserEntry 9 }
nUserApLocation OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Location of the access point to
which the user is associated.
"
::= { wlsxUserEntry 10 }
nUserApBSSID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
BSSID of the access point, which
the user used to connect to the controller.
"
::= { wlsxUserEntry 11 }
nUserIsOnHomeAgent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Object will indicate if the controller is the home controller
for the user or not.
"
::= { wlsxUserEntry 12 }
nUserHomeAgentIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Home agent IP Address of the user. If this user is already on
the home controller, then this IP is the controller IP else it
is the home controller IP address.
"
::= { wlsxUserEntry 13 }
nUserMobilityStatus OBJECT-TYPE
SYNTAX INTEGER {
visitor(1),
away(2),
associated(3),
wired(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The Mobility Status of the User.
"
::= { wlsxUserEntry 14 }
nUserHomeVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Home VLAN of the User. If the user is on the home controller
then this VLAN will be same as userDefaultVlan.
"
::= { wlsxUserEntry 15 }
nUserDefaultVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Default VLAN of the User based on the AP configuration.
"
::= { wlsxUserEntry 16 }
nUserAssignedVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This Vlan will be different from the Default VLAN if the user has
a derived VLAN Configuration.
"
::= { wlsxUserEntry 17 }
nUserBWContractName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"
Name of the Bandwidth Contract applied to this user.
"
::= { wlsxUserEntry 18 }
nUserBWContractUsage OBJECT-TYPE
SYNTAX INTEGER {
user(1),
shared(2)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"
Indicates how the Bandwidth Contract is used.
"
::= { wlsxUserEntry 19 }
nUserBWContractId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"
Bandwidth Contract Id Assigned to the User
"
::= { wlsxUserEntry 20 }
nUserIsProxyArpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This object will indicate if the controller is proxy ARPing for the
user.
"
::= { wlsxUserEntry 21 }
nUserCurrentVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The VLAN to which the user is currently bound.
"
::= { wlsxUserEntry 22 }
nUserIsWired OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates whether this is a wired or wireless user.
"
::= { wlsxUserEntry 23 }
nUserConnectedSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The slot to which the user is connected, if wired.
"
::= { wlsxUserEntry 24 }
nUserConnectedPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The port to which the user is connected, if wired.
"
::= { wlsxUserEntry 25 }
nUserPhyType OBJECT-TYPE
SYNTAX ArubaPhyType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The wireless PHY type to which the user is associated, or 'wired'.
"
::= { wlsxUserEntry 26 }
nUserMobilityDomainName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The name of mobility domain mobile user belongs to.
"
::= { wlsxUserEntry 27 }
nUserUPBWContractName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Name of the Upstream Bandwidth Contract applied to this user.
"
::= { wlsxUserEntry 28 }
nUserUPBWContractUsage OBJECT-TYPE
SYNTAX INTEGER {
user(1),
shared(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates how the Upstream Bandwidth Contract is used.
"
::= { wlsxUserEntry 29 }
nUserUPBWContractId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Upstream Bandwidth Contract Id Assigned to the User
"
::= { wlsxUserEntry 30 }
nUserDNBWContractName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Name of the Downstream Bandwidth Contract applied to this user.
"
::= { wlsxUserEntry 31 }
nUserDNBWContractUsage OBJECT-TYPE
SYNTAX INTEGER {
user(1),
shared(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Indicates how the Downstream Bandwidth Contract is used.
"
::= { wlsxUserEntry 32 }
nUserDNBWContractId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Downstream Bandwidth Contract Id Assigned to the User
"
::= { wlsxUserEntry 33 }
wlsxUserSessionTimeTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxUserSessionTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table lists the user session time counts on an ESSID.
ssid. The session times are separated into predefined time length
buckets, with sessions lasting longer than 240 minutes falling into
the 240min bucket.
"
::= { wlsxUserAllInfoGroup 3 }
wlsxUserSessionTimeEntry OBJECT-TYPE
SYNTAX WlsxUserSessionTimeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
User session time data, divided into buckets of different
time length. "
INDEX { wlanESSID, wlsxUserSessionTimeLength}
::= { wlsxUserSessionTimeTable 1 }
WlsxUserSessionTimeEntry ::=
SEQUENCE {
wlsxUserSessionTimeLength Integer32,
wlsxUserSessionTimeCount Counter32
}
wlsxUserSessionTimeLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Pre-defined user session time length.
"
::= { wlsxUserSessionTimeEntry 1 }
wlsxUserSessionTimeCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Number of users that are connected to the essid whose sessions expired in this time interval.
"
::= { wlsxUserSessionTimeEntry 2 }
END
Reference in New Issue View Git Blame Copy Permalink