mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
librenms-librenms/mibs/ENTERASYS-POWER-ETHERNET-EXT-MIB
Adam Amstrong 6b9d05653c move Enterasys mibs to mib root 
git-svn-id: http://www.observium.org/svn/observer/trunk@1569 61d68cd4-352d-0410-923a-c4978735b2b8
2010-07-31 12:40:45 +00:00

657 lines
22 KiB
Plaintext
Raw Blame History

ENTERASYS-POWER-ETHERNET-EXT-MIB DEFINITIONS ::= BEGIN
-- enterasys-power-ethernet-mib-ext-mib.txt
--
-- Part Number:
--
--
-- This module provides authoritative definitions for Enterasys
-- Networks' Power Ethernet Extensions MIB.
--
-- This module will be extended, as needed.
-- Enterasys Networks reserves the right to make changes in this
-- specification and other information contained in this document
-- without prior notice. The reader should consult Enterasys Networks
-- to determine whether any such changes have been made.
--
-- In no event shall Enterasys Networks be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Enterasys
-- Networks has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Enterasys Networks grants vendors, end-users, and other interested
-- parties a non-exclusive license to use this Specification in
-- connection with the management of Enterasys Networks products.
-- Copyright 2004-2005 Enterasys Networks, Inc.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
Integer32, Unsigned32, Gauge32
FROM SNMPv2-SMI
pethMainPseEntry, pethPsePortEntry
FROM POWER-ETHERNET-MIB
entPhysicalIndex
FROM ENTITY-MIB
EnabledStatus
FROM P-BRIDGE-MIB
etsysModules
FROM ENTERASYS-MIB-NAMES;
etsysPowerEthernetMibExtMIB MODULE-IDENTITY
LAST-UPDATED "200501101630Z" -- Mon Jan 10 16:30 GMT 2005
ORGANIZATION "Enterasys Networks, Inc"
CONTACT-INFO
"Postal: Enterasys Networks
50 Minuteman Rd.
Andover, MA 01810-1008
USA
Phone: +1 978 684 1000
E-mail: support@enterasys.com
WWW: http://www.enterasys.com"
DESCRIPTION
"This MIB module defines a portion of the SNMP MIB under
the Enterasys Networks enterprise OID pertaining to the
allocation of power in a Pse chassis."
REVISION "200501101630Z" -- Mon Jan 10 16:30 GMT 2005
DESCRIPTION
"Added the power management functionality."
REVISION "200408172227Z" -- Tue Aug 17 22:27 GMT 2004
DESCRIPTION
"The initial version of this MIB module"
::= { etsysModules 50 }
-- -------------------------------------------------------------
-- MIB Objects
-- -------------------------------------------------------------
etsysPowerEthernetObjects OBJECT IDENTIFIER
::= { etsysPowerEthernetMibExtMIB 1 }
etsysPseChassisPowerAllocation OBJECT IDENTIFIER
::= { etsysPowerEthernetObjects 1 }
etsysPseSlotPowerAllocation OBJECT IDENTIFIER
::= { etsysPowerEthernetObjects 2 }
etsysPseChassisPowerStatus OBJECT IDENTIFIER
::= { etsysPowerEthernetObjects 3 }
etsysPseSlotPowerManagement OBJECT IDENTIFIER
::= { etsysPowerEthernetObjects 4 }
etsysPsePortPowerManagement OBJECT IDENTIFIER
::= { etsysPowerEthernetObjects 5 }
etsysPsePowerNotification OBJECT IDENTIFIER
::= { etsysPowerEthernetObjects 0 }
-- -------------------------------------------------------------
-- The Pse Chassis Power Allocation Group
-- -------------------------------------------------------------
etsysPseChassisPowerAllocationMode OBJECT-TYPE
SYNTAX INTEGER {
auto (1),
manual (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In auto mode, a Pse Power Management Algorithm handles the
allocation of power to all the modules.
In manual mode, power is manually allocated to the modules
via the etsysPseSlotPowerAllocationTable.
The value of etsysPseChassisPowerAllocationAvailable is used
to determine the power available for allocation in this
chassis in both auto and manual mode.
Maintaining the value of this object across agent reboots
is REQUIRED."
DEFVAL { auto }
::= { etsysPseChassisPowerAllocation 1 }
etsysPseChassisPowerSnmpNotification OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current state of the SNMP Notification functionality for
Pse.
enabled (1) - The Pse will generate SNMP Notifications for
potentially adverse Pse power conditions.
The generation of these notifications are NOT
dependant upon the state of
etsysPseChassisPowerAllocationMode.
disabled (2) - The SNMP Notifications defined in this MIB will
NOT be generated under any conditions.
Agents are not required to generate SNMP Notifications for
conditions that exist when this object is set to enabled.
Maintaining the value of this object across agent reboots is
REQUIRED."
::= { etsysPseChassisPowerAllocation 2 }
etsysPseChassisPowerAvailableMaximum OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum percentage of power from the Pse Power Supply
that this chassis can use.
The default value should be 100 percent, meaning the
chassis can use all the power detected from Pse Power
Supply.
Maintaining the value of this object across agent reboots
is REQUIRED."
DEFVAL { 100 }
::= { etsysPseChassisPowerAllocation 3 }
-- -------------------------------------------------------------
-- The Pse Slot Power Allocation Group
-- -------------------------------------------------------------
etsysPseSlotPowerAllocationTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysPseModulePowerAllocationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Power allocation management information for all slots."
::= { etsysPseSlotPowerAllocation 1 }
etsysPseSlotPowerAllocationEntry OBJECT-TYPE
SYNTAX EtsysPseModulePowerAllocationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Power allocation management information for an entPhysicalEntry
that has an entPhysicalClass of container(5) and represents a
slot in the chassis that could be occupied by a Pse module."
INDEX { entPhysicalIndex }
::= { etsysPseSlotPowerAllocationTable 1 }
EtsysPseModulePowerAllocationEntry ::=
SEQUENCE {
etsysPseSlotPowerMaximum Unsigned32,
etsysPseSlotPowerAssigned Unsigned32
}
etsysPseSlotPowerMaximum OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum power that can be consumed by the module in
this slot, based on the module's characteristics. For
slots without Pse modules this object MUST return zero."
::= { etsysPseSlotPowerAllocationEntry 1 }
etsysPseSlotPowerAssigned OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Watts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The power that will be allocated to this slot in manual mode.
In auto mode, this object has no effect.
Maintaining the value of this object across agent reboots
is REQUIRED."
DEFVAL { 0 }
::= { etsysPseSlotPowerAllocationEntry 2 }
-- -------------------------------------------------------------
-- The Pse Chassis Power Status Group
-- -------------------------------------------------------------
etsysPseChassisPowerDetected OBJECT-TYPE
SYNTAX Gauge32
UNITS "Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total power detected by the chassis from Pse Power Supply."
::= { etsysPseChassisPowerStatus 1 }
etsysPseChassisPowerAvailable OBJECT-TYPE
SYNTAX Gauge32
UNITS "Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total power available for this chassis. This is
( etsysPseChassisPowerDetected *
( etsysPseChassisPowerAvailableMaximum / 100 ) )."
::= { etsysPseChassisPowerStatus 2 }
etsysPseChassisPowerConsumable OBJECT-TYPE
SYNTAX Gauge32
UNITS "Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total power that could be consumed by all of the Pse
modules in the chassis. This is the summation of the values
of all of the etsysPseSlotPowerMaximum objects."
::= { etsysPseChassisPowerStatus 3 }
etsysPseChassisPowerAssigned OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total power assigned to the slots in the chassis.
This is the summation of the values of all of the
etsysPseSlotPowerAssigned objects."
::= { etsysPseChassisPowerStatus 4 }
etsysPseChassisPowerRedundancy OBJECT-TYPE
SYNTAX INTEGER {
redundant (1),
notRedundant (2),
notSupported (3) -- Object is not supported
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denotes whether or not the Pse power system has redundant
capacity."
::= { etsysPseChassisPowerStatus 5 }
-- -------------------------------------------------------------
-- The Pse Module Power Management Group
-- -------------------------------------------------------------
etsysPseModulePowerManagementTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysPseModulePowerManagementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table augments the pethMainPseTable of the
PowerEthernetMIB (rfc3621). It provides objects
that are used to budget power."
::= { etsysPseSlotPowerManagement 1 }
etsysPseModulePowerManagementEntry OBJECT-TYPE
SYNTAX EtsysPseModulePowerManagementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that display, control, and calculate
the power consumption of a PSE."
AUGMENTS { pethMainPseEntry }
::= { etsysPseModulePowerManagementTable 1 }
EtsysPseModulePowerManagementEntry ::=
SEQUENCE {
etsysPseModulePowerMode INTEGER,
etsysPseModulePowerClassBudget Gauge32,
etsysPseModulePowerUsage Integer32
}
etsysPseModulePowerMode OBJECT-TYPE
SYNTAX INTEGER {
realtime (1),
class (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the power management of the PSE.
It also controls how etsysPseModulePowerClassBudget,
etsysPseModulePowerUsage and etsysPsePortPowerLimit are
utilized.
In realtime mode, the power is managed based on the
actual power consumption of the ports.
etsysPseModulePowerClassBudget is sum of power
consumed by all ports, measured in real-time. The
etsysPseModulePowerUsage is ratio of pethMainPseConsumptionPower
over pethMainPsePower, expressed in percents.
In class mode, the power is managed based on the IEEE 802.3af
definition of the class upper limit, except classes 0 & 4
for which the actual power consumption is used.
etsysPseModulePowerClassBudget is sum of all ports
power according to their class upper bound, except classes 0 & 4
for which the actual power consumption is accounted.
The etsysPseModulePowerUsage is ratio of
etsysPseModulePowerClassBudget over pethMainPsePower, expressed
in percents.
The effect of etsysPseModulePowerMode to etsysPsePortPowerLimit is
described in etsysPsePortPowerLimit definition.
Maintaining the value of this object across agent reboots
is REQUIRED."
DEFVAL { realtime }
::= { etsysPseModulePowerManagementEntry 1 }
etsysPseModulePowerClassBudget OBJECT-TYPE
SYNTAX Gauge32
UNITS "Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In class mode, this is sum of all ports power according to
their class upper bound, except classes 0 & 4 for which the
actual power consumption is accounted. In realtime mode,
this is sum of power consumed by all ports, measured in
real-time."
::= { etsysPseModulePowerManagementEntry 2 }
etsysPseModulePowerUsage OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In class mode, this is ratio of etsysPseModulePowerClassBudget
over pethMainPsePower, expressed in percents.
In realtime mode, this is ratio of pethMainPseConsumptionPower
over pethMainPsePower, expressed in percents."
::= { etsysPseModulePowerManagementEntry 3 }
-- -------------------------------------------------------------
-- The Pse Port Power Management Group
-- -------------------------------------------------------------
etsysPsePortPowerManagementTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysPsePortPowerManagementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table augments the pethPsePortTable of the
PowerEthernetMIB (rfc3621). It provides objects
that are used to budget power."
::= { etsysPsePortPowerManagement 1 }
etsysPsePortPowerManagementEntry OBJECT-TYPE
SYNTAX EtsysPsePortPowerManagementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that display and control the power
consumption of a PSE, at the port level."
AUGMENTS { pethPsePortEntry }
::= { etsysPsePortPowerManagementTable 1 }
EtsysPsePortPowerManagementEntry ::=
SEQUENCE {
etsysPsePortPowerLimit Integer32,
etsysPsePortPowerUsage Gauge32,
etsysPsePortPDType INTEGER
}
etsysPsePortPowerLimit OBJECT-TYPE
SYNTAX Integer32 (0..15400)
UNITS "milliwatts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object sets the maximum power allowed on this port.
If the port exceeds its power limit, it will be shut down.
This object has effect only when its module is in realtime
mode (specified by etsysPseModulePowerMode). In class mode,
the power limit of a port is defined by port's class upper
bound, according to IEEE 802.3af."
DEFVAL { 15400 }
::= { etsysPsePortPowerManagementEntry 1 }
etsysPsePortPowerUsage OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual power consumption measured in real-time."
::= { etsysPsePortPowerManagementEntry 2 }
etsysPsePortPDType OBJECT-TYPE
SYNTAX INTEGER {
legacy (1),
ieee8023af (2),
other (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates detected PD type on this port."
::= { etsysPsePortPowerManagementEntry 3 }
-- -------------------------------------------------------------
-- The Pse Power Supply Status Table
-- -------------------------------------------------------------
etsysPsePowerSupplyStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF EtsysPsePowerSupplyStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Status information for all of the Pse power supply modules."
::= { etsysPseChassisPowerStatus 6 }
etsysPsePowerSupplyStatusEntry OBJECT-TYPE
SYNTAX EtsysPsePowerSupplyStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Status information for an individual Pse power supply module."
INDEX { etsysPsePowerSupplyModuleNumber }
::= { etsysPsePowerSupplyStatusTable 1 }
EtsysPsePowerSupplyStatusEntry ::=
SEQUENCE {
etsysPsePowerSupplyModuleNumber Unsigned32,
etsysPsePowerSupplyModuleStatus INTEGER
}
etsysPsePowerSupplyModuleNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique number that identifies the Pse power supply
and is relative to the module's physical location."
::= { etsysPsePowerSupplyStatusEntry 1 }
etsysPsePowerSupplyModuleStatus OBJECT-TYPE
SYNTAX INTEGER {
infoNotAvailable (1),
notInstalled (2),
installedAndOperating (3),
installedAndNotOperating (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denotes the power supply's status."
::= { etsysPsePowerSupplyStatusEntry 2 }
-- -------------------------------------------------------------
-- The Pse Power Notifications Group
-- -------------------------------------------------------------
etsysPseChassisPowerRedundant NOTIFICATION-TYPE
OBJECTS { etsysPseChassisPowerDetected }
STATUS current
DESCRIPTION
"Pse chassis power is in redundant state. At least 500 msec
must elapse between notifications being emitted by the same
object instance."
::= { etsysPsePowerNotification 1 }
etsysPseChassisPowerNonRedundant NOTIFICATION-TYPE
OBJECTS { etsysPseChassisPowerDetected }
STATUS current
DESCRIPTION
"Pse chassis power is in non-redundant state. At least 500
msec must elapse between notifications being emitted by the
same object instance."
::= { etsysPsePowerNotification 2 }
etsysPsePowerSupplyModuleStatusChange NOTIFICATION-TYPE
OBJECTS { etsysPsePowerSupplyModuleStatus }
STATUS current
DESCRIPTION
"A Pse Power Supply module has changed state. At least 500
msec must elapse between notifications being emitted by the
same object instance."
::= { etsysPsePowerNotification 3 }
-- -------------------------------------------------------------
-- Conformance Information
-- -------------------------------------------------------------
etsysPsePowerAllocationConformance OBJECT IDENTIFIER
::= { etsysPowerEthernetMibExtMIB 2 }
etsysPsePowerAllocationGroups OBJECT IDENTIFIER
::= { etsysPsePowerAllocationConformance 1 }
etsysPsePowerAllocationCompliances OBJECT IDENTIFIER
::= { etsysPsePowerAllocationConformance 2 }
-- -------------------------------------------------------------
-- Units of conformance
-- -------------------------------------------------------------
etsysPsePowerAllocationControlGroup OBJECT-GROUP
OBJECTS {
etsysPseChassisPowerAllocationMode,
etsysPseChassisPowerSnmpNotification,
etsysPseChassisPowerAvailableMaximum,
etsysPseSlotPowerMaximum,
etsysPseSlotPowerAssigned
}
STATUS current
DESCRIPTION
"Power over Ethernet Power Allocation Control group."
::= { etsysPsePowerAllocationGroups 1 }
etsysPseChassisPowerStatusGroup OBJECT-GROUP
OBJECTS {
etsysPseChassisPowerDetected,
etsysPseChassisPowerAvailable,
etsysPseChassisPowerConsumable,
etsysPseChassisPowerAssigned,
etsysPseChassisPowerRedundancy,
etsysPsePowerSupplyModuleStatus
}
STATUS current
DESCRIPTION
"Power over Ethernet Power Supply group."
::= { etsysPsePowerAllocationGroups 2 }
etsysPsePowerNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
etsysPseChassisPowerRedundant,
etsysPseChassisPowerNonRedundant,
etsysPsePowerSupplyModuleStatusChange
}
STATUS current
DESCRIPTION
"Power over Ethernet Power Redundancy Notifications group."
::= { etsysPsePowerAllocationGroups 3 }
etsysPseModulePowerManagementGroup OBJECT-GROUP
OBJECTS {
etsysPseModulePowerMode,
etsysPseModulePowerClassBudget,
etsysPseModulePowerUsage
}
STATUS current
DESCRIPTION
"Power over Ethernet Module Power Budget Management group."
::= { etsysPsePowerAllocationGroups 4 }
etsysPsePortPowerManagementGroup OBJECT-GROUP
OBJECTS {
etsysPsePortPowerLimit,
etsysPsePortPowerUsage,
etsysPsePortPDType
}
STATUS current
DESCRIPTION
"Power over Ethernet Port Power Budget Management group."
::= { etsysPsePowerAllocationGroups 5 }
-- -------------------------------------------------------------
-- Compliance statements
-- -------------------------------------------------------------
etsysPsePowerAllocationCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices that support manual
power allocation."
MODULE
MANDATORY-GROUPS {
etsysPsePowerAllocationControlGroup,
etsysPseChassisPowerStatusGroup,
etsysPsePowerNotificationGroup
}
::= { etsysPsePowerAllocationCompliances 1 }
etsysPsePowerAllocationCompliance2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices that support
power budgets."
MODULE
MANDATORY-GROUPS {
etsysPsePowerAllocationControlGroup,
etsysPseChassisPowerStatusGroup,
etsysPsePowerNotificationGroup
}
GROUP etsysPseModulePowerManagementGroup
DESCRIPTION
"This group is conditionally mandatory for entities that
support power management on a per module basis."
GROUP etsysPsePortPowerManagementGroup
DESCRIPTION
"This group is conditionally mandatory for entities that
support power management on a per port basis."
::= { etsysPsePowerAllocationCompliances 2 }
END
Reference in New Issue View Git Blame Copy Permalink