mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
librenms-librenms/mibs/S5-ETHERNET-COMMON-MIB
Adam Amstrong 7445a736a6 move nortel mibs to root 
git-svn-id: http://www.observium.org/svn/observer/trunk@1576 61d68cd4-352d-0410-923a-c4978735b2b8
2010-07-31 16:07:50 +00:00

857 lines
26 KiB
Plaintext
Raw Blame History

S5-ETHERNET-COMMON-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32
FROM SNMPv2-SMI
s5EnCfg, s5EnStat
FROM S5-ETHERNET-MIB
TimeIntervalSec, SrcIndx, AttId
FROM S5-TCS-MIB;
s5EthernetCommonMib MODULE-IDENTITY
LAST-UPDATED "200407200000Z"
ORGANIZATION "Nortel Networks"
CONTACT-INFO "Nortel Networks"
DESCRIPTION
"5000 Ethernet Common MIB
Copyright 1993-2004 Nortel Networks, Inc.
All rights reserved.
This Nortel Networks SNMP Management Information Base Specification
(Specification) embodies Nortel Networks' confidential and
proprietary intellectual property. Nortel Networks retains all
title and ownership in the Specification, including any
revisions.
This Specification is supplied 'AS IS,' and Nortel Networks makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification."
REVISION "200407200000Z" -- 20 July 2004
DESCRIPTION "Version 118: Conversion to SMIv2"
::= { s5EnCfg 0 }
-- SECTION 2: Configuration information
-- Port Table
s5EnPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF S5EnPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about each
managed ethernet connectivity port on a board.
The number of entries is determined by the
number of managed ports. Those boards
that do not have any ports do not have
any entries in this table."
::= { s5EnCfg 1 }
s5EnPortEntry OBJECT-TYPE
SYNTAX S5EnPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in Ethernet port table. Entries
can not be created or deleted via SNMP."
INDEX { s5EnPortBrdIndx,
s5EnPortIndx }
::= { s5EnPortTable 1 }
S5EnPortEntry ::= SEQUENCE {
s5EnPortBrdIndx INTEGER,
s5EnPortIndx INTEGER,
s5EnPortPartStatus INTEGER,
s5EnPortPartTime TimeIntervalSec,
s5EnPortLinkStatus INTEGER,
s5EnPortJabberStatus INTEGER
}
s5EnPortBrdIndx OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the board. This corresponds to
the index of the slot containing the board."
::= { s5EnPortEntry 1 }
s5EnPortIndx OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port on the board. Its
value ranges between 1 and index of the last
manageable port on the board."
::= { s5EnPortEntry 2 }
s5EnPortPartStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
enabled(2),
partition(3),
autoPartition(4),
timedPartition(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The partition status of the port.
The following values can be written:
enabled(2)..........enabled port
partition(3)........partition port
timedPartition(5)...time partition port (uses value
from s5EnPortPartTime)
The following values reflect the partition
status of the port:
other(1).............partition status unknown
enabled(2)...........port enabled
partition(3).........port partitioned
autoPartition(4).....port auto-partitioned by
hardware
timedPartition(5)....port is timed partitioned
(see value of
s5EnPortPartTime).
On GETs with port status of timedPartition(5), if
the time remaining before the partition is undone
is available, it will be reported in object
s5EnPortPartTime as a positive value. If not
available, the value of s5EnPortPartTime will
be zero. When changing a port to timedPartition(5),
the SET request must also contain the value
for object s5EnPortPartTime. Only value
partition(3) will survive resets of the host card."
::= { s5EnPortEntry 3 }
s5EnPortPartTime OBJECT-TYPE
SYNTAX TimeIntervalSec
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The length of time to keep the port
partitioned when a timed partition is
done to the port. This object can only
be written in the same request that sets
s5EnPortPartStatus to timedPartition(5).
Afterwards, it indicates the amount of
time left before the timed partition
is completed, at which time
s5EnPortPartStatus is changed to
enabled(2). This object has the value of
zero if the port is not time partitioned,
or if the amount of time is not available."
::= { s5EnPortEntry 4 }
s5EnPortLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
off(2),
on(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Tells whether the port is receiving
link status. The values are:
other(1)...returned for AUI
off(2).....link is not connected
on(3)......link is connected
on/off applies to 10BASE-T and Fiber ports only."
::= { s5EnPortEntry 5 }
s5EnPortJabberStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
jabbering(2),
ok(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The jabber status of the DTE(s) connected
to the port. The values are:
other(1).......unknown or other condition
jabbering(2)...port receiving jabber
ok(3)..........no jabber detected."
::= { s5EnPortEntry 6 }
-- The System 5000 Port Extension Table
-- Implementation of the Port Extension Table is optional
s5EnPortExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF S5EnPortExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An extension table to s5EnPortTable containing
additional information about per port
switchable, autonegotiating 10/100 Mbit
ethernet connectivity ports on a board.
The number of entries is determined by the
number of managed ports. Those boards
that do not have any ports do not have
any entries in this table."
::= { s5EnCfg 3 }
s5EnPortExtEntry OBJECT-TYPE
SYNTAX S5EnPortExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in Ethernet port extension table.
Entries can not be created or deleted
via SNMP."
INDEX { s5EnPortExtBrdIndx,
s5EnPortExtIndx }
::= { s5EnPortExtTable 1 }
S5EnPortExtEntry ::= SEQUENCE {
s5EnPortExtBrdIndx INTEGER,
s5EnPortExtIndx INTEGER,
s5EnPortExtHwCapability OCTET STRING,
s5EnPortExtAutoNegAdv OCTET STRING,
s5EnPortExtAutoNegRcvd OCTET STRING,
s5EnPortExt10MbSegAttCfg AttId,
s5EnPortExt100MbSegAttCfg AttId,
s5EnPortExt10MbSegConnCapability OCTET STRING,
s5EnPortExt100MbSegConnCapability OCTET STRING,
s5EnPortExtActiveSpeed INTEGER,
s5EnPortExtCurDuplexMode INTEGER
}
s5EnPortExtBrdIndx OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the board. This corresponds to
the index of the slot containing the board."
::= { s5EnPortExtEntry 1 }
s5EnPortExtIndx OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the port on the board. Its
value ranges between 1 and index of the last
manageable port on the board."
::= { s5EnPortExtEntry 2 }
s5EnPortExtHwCapability OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit array that contains the bit map
representing the hardware capabilites
of the port. The bit 7 tells if the port
supports auto-negotiation. If the auto negotiation
is on, the port will have multiple speed capabilities
while if the auto negotiation is not supported, the
hardware will only be capable for one speed:
bit 0 - 10 BASE-T half duplex capable
bit 1 - 10 BASE-T full duplex capable
bit 2 - 100 BASE-TX half duplex capable
bit 3 - 100 BASE-TX full duplex capable
bit 5 - 100 BASE-FX full duplex capable
bit 6 - 100 BASE-FX half duplex capable
bit 7 - auto negotiation support capability
When auto negotiation is supported only bits 0-3
are used to indicate the capabilities available
for negotiation, and any or all of these bits may
be set as long as at least one bit is set.
When auto negotiation is NOT supported (bit 7 = 0)
all other bits are used to indicate the capabilities
supported by the port, but which must be manually
configured."
::= { s5EnPortExtEntry 3 }
s5EnPortExtAutoNegAdv OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A bit array that contains the bit map
representing the abilities advertised
during link negociation. The bit 7 tells
if auto negotiation is enabled or disabled:
bit 0 - 10 BASE-T half duplex capable
bit 1 - 10 BASE-T full duplex capable
bit 2 - 100 BASE-TX half duplex capable
bit 3 - 100 BASE-TX full duplex capable
bit 5 - 100 BASE-FX full duplex capable
bit 6 - 100 BASE-FX half duplex capable
bit 7 - auto negotiation is enabled or disabled
Only capabilites present in the hardware as
indicated by s5EnPortExtHwCapability can be
advertised.
If auto negotiation is enabled only bits 0-3
are used to indicate the capabilities available
for negotiation. Any or all of these bits may be
set as long as at least one bit is set, AND the
settings are in accordance with s5EnPortExtHwCapability.
If auto negotiation is disabled one and only
one of the speed setting bits MUST be set in
accordance with s5EnPortExtHwCapability."
::= { s5EnPortExtEntry 4 }
s5EnPortExtAutoNegRcvd OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit array that contains the bit map
representing the auto-negotiation
abilities of the remote end of the link:
bit 0 - 10 BASE-T half duplex capable
bit 1 - 10 BASE-T full duplex capable
bit 2 - 100 BASE-TX half duplex capable
bit 3 - 100 BASE-TX full duplex capable
"
::= { s5EnPortExtEntry 5 }
s5EnPortExt10MbSegAttCfg OBJECT-TYPE
SYNTAX AttId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index for the segment used in case
a 10 Mbit link is established."
::= { s5EnPortExtEntry 6 }
s5EnPortExt100MbSegAttCfg OBJECT-TYPE
SYNTAX AttId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index for the segment used in case
a 100 Mbit link is established."
::= { s5EnPortExtEntry 7 }
s5EnPortExt10MbSegConnCapability OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit array that contains the bit map
representing all available 10Mbit backplane
segment and local segment connections for
the port. One bit is also reserved to
indicate if the cluster has an isolate
capability.
The first 31 bits of the array represent
the backplane numbers, starting from the
lower order bit. Bit 32 indicates whether
the port has a null connection capability.
The bits in the fifth and sixth octets,
starting with bits in the lower order octet,
represent local segments that the port
can connect to.
A bit with a value of 1 means that the
port is capable of connecting to the
corresponding backplane segment, local segment
or null segment."
::= { s5EnPortExtEntry 8 }
s5EnPortExt100MbSegConnCapability OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit array that contains the bit map
representing all available 100Mbit backplane
segment and local segment connections for
the port. One bit is also reserved to
indicate if the cluster has an isolate
capability.
The first 31 bits of the array represent
the backplane numbers, starting from the
lower order bit. Bit 32 indicates whether
the port has a null connection capability.
The bits in the fifth and sixth octets,
starting with bits in the lower order octet,
represent local segments that the port
can connect to.
A bit with a value of 1 means that the
port is capable of connecting to the
corresponding backplane segment, local segment
or null segment."
::= { s5EnPortExtEntry 9 }
s5EnPortExtActiveSpeed OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
bps10M(2),
bps100M(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The speed of the link. The possible
values are:
unknown(1)........unknown, no link
bps10M(2).........10 Mbit link
bps100M(3)........100 Mbit link"
::= { s5EnPortExtEntry 10 }
s5EnPortExtCurDuplexMode OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
halfDuplex(2),
fullDuplex(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of duplex mode. The possible
values are:
unknown(1)........unknown, no link
halfDuplex(2).........half duplex mode
fullDuplex(3)........full duplex mode"
::= { s5EnPortExtEntry 11 }
-- SECTION 3: Statistics
-- Basic Statistics Table
s5EnBStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF S5EnBStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing Ethernet basic
statistics. The entries in the table
may come from several different data
sources. The number of entries is
determined by the number of sources
that can provide the information."
::= { s5EnStat 1 }
s5EnBStatEntry OBJECT-TYPE
SYNTAX S5EnBStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in Ethernet basic statistics table.
Entries can not be created or deleted via
SNMP."
INDEX { s5EnBStatSrcIndx }
::= { s5EnBStatTable 1 }
S5EnBStatEntry ::= SEQUENCE {
s5EnBStatSrcIndx SrcIndx,
s5EnBStatGoodOctets Counter32,
s5EnBStatGoodFrms Counter32,
s5EnBStatBcastFrms Counter32,
s5EnBStatMcastFrms Counter32,
s5EnBStatAlignErrors Counter32,
s5EnBStatFcsErrors Counter32,
s5EnBStatRunts Counter32,
s5EnBStatTooLongFrms Counter32,
s5EnBStatFragments Counter32,
s5EnBStatVeryLongEvents Counter32,
s5EnBStatColls Counter32,
s5EnBStatLateColls Counter32,
s5EnBStatShortEvents Counter32,
s5EnBStatRateMismatches Counter32,
s5EnBStatBackOffFailures Counter32,
s5EnBStatAutoPartitions Counter32,
s5EnBStatShortIPGs Counter32,
s5EnBStatNullFrames Counter32
}
s5EnBStatSrcIndx OBJECT-TYPE
SYNTAX SrcIndx
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the entry in the table.
This index identifies the source of the
information. Only those sources that provide
these statistics are in this table."
::= { s5EnBStatEntry 1 }
s5EnBStatGoodOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of octets contained in frames received
which had no errors.
This counter includes octets in unicast, broadcast,
and multicast frames. This counter includes octets
after the start frame delimiter up to FCS but not
including FCS octets."
::= { s5EnBStatEntry 2 }
s5EnBStatGoodFrms OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames that are detected without
errors. This does not include frames received
with a frame-too-long, runt, FCS, or alignment errors.
This counter includes unicast, broadcast, and multicast
frames."
::= { s5EnBStatEntry 3 }
s5EnBStatBcastFrms OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames that are detected without
errors and are directed to the broadcast group
address. This does not include frames received
with a frame-too-long, runt, FCS, or alignment
errors. Multicast frames are not included."
::= { s5EnBStatEntry 4 }
s5EnBStatMcastFrms OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames that are detected
without errors and are directed to a
non-broadcast group address. This does not
include frames received with a frame-too-long,
runt, FCS, or alignment errors."
::= { s5EnBStatEntry 5 }
s5EnBStatAlignErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames detected
that are not an integral number of octets
in length and do not pass the FCS check.
This counter is incremented when the
frame is received with FramingError and
FcsError and whose OctetCount is greater
than of equal to minFramSize and less than
or equal to maxFramSize."
::= { s5EnBStatEntry 6 }
s5EnBStatFcsErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames detected that are an
integral number of octets in length that
do not pass the FCS check. This counter is
incremented when the frame is received with
FcsError and NoFramingError and NoCollisions
and whose OctetCount is greater than or equal
to minFramsize and less than or equal to
maxFrameSize."
::= { s5EnBStatEntry 7 }
s5EnBStatRunts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames detected that are less than
the minimum permitted frame size and have a
good FCS."
::= { s5EnBStatEntry 8 }
s5EnBStatTooLongFrms OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of frames detected that exceed the
maximum permitted frame size. This counter is
incremented when a frame received on this port whose
OctetCount is greater than maxFramSize."
::= { s5EnBStatEntry 9 }
s5EnBStatFragments OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of fragments detected between 80-512 bits
(64 bytes), inclusively, with invalid FCS. (These
commonly represent collision fragments, and are
not errors)."
::= { s5EnBStatEntry 10 }
s5EnBStatVeryLongEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the times that MAU
jabber lockup protection (MJLP) was detected
due to transmission of data that exceeded
5 msec in duration(OctetCount greater than
maxFramSize). This information can be useful
in identifying faulty stations."
::= { s5EnBStatEntry 11 }
s5EnBStatColls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of receive collisions detected."
::= { s5EnBStatEntry 12 }
s5EnBStatLateColls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of late receive collisions detected.
This counter is incremented for each event
in which there is a receive Collision and
ActivityDuration is greater than the
LateEventThreshold."
::= { s5EnBStatEntry 13 }
s5EnBStatShortEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of fragments detected with
ActivityDuration less than ShortEventMaxTime.
ShortEventMaxTime is greater than 74 bit times and
less than 82 bit times."
::= { s5EnBStatEntry 14 }
s5EnBStatRateMismatches OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the occurrences of
out of spec bit rates. This indicates the
number of times the FIFO buffer over-runs or
under-runs due to transmission rate errors."
::= { s5EnBStatEntry 15 }
s5EnBStatBackOffFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented by one for each
frame received on this port with collision and
port activity time greater than 552 to 560 bit time."
::= { s5EnBStatEntry 16 }
s5EnBStatAutoPartitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of times that this port
was automatically partitioned. The condition
occurs when 32 consecutive collisions are
detected on the port."
::= { s5EnBStatEntry 17 }
s5EnBStatShortIPGs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of occurrences of a too short IPG
(inter packet gap before a good packet) that were
detected."
::= { s5EnBStatEntry 18 }
s5EnBStatNullFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the occurrences of
frames received with no collision and whose
octetCount is equal to 0 and activity time is
greater than ValidPacketMinTime."
::= { s5EnBStatEntry 19 }
-- Port Extension Statistics Table
s5EnPStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF S5EnPStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing Ethernet port
extension statistics. This table extends
table s5EnBStatTable for ports. The entries
in the table may come only from port
sources. The number of entries is determined
by the number of sources that can provide the
information."
::= { s5EnStat 2 }
s5EnPStatEntry OBJECT-TYPE
SYNTAX S5EnPStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in Ethernet port extension statistic table.
Entries can not be created or deleted via
SNMP."
INDEX { s5EnPStatSrcIndx }
::= { s5EnPStatTable 1 }
S5EnPStatEntry ::= SEQUENCE {
s5EnPStatSrcIndx SrcIndx,
s5EnPStatSourceAddrChngs Counter32,
s5EnPStatLinkStatusChngs Counter32,
s5EnPStatLastSourceAddr OCTET STRING
}
s5EnPStatSrcIndx OBJECT-TYPE
SYNTAX SrcIndx
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the entry in the table.
This index identifies the source of the
information. Only those sources that provide
these statistics are in this table."
::= { s5EnPStatEntry 1 }
s5EnPStatSourceAddrChngs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of changes in Last Source Address."
::= { s5EnPStatEntry 2 }
s5EnPStatLinkStatusChngs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains a count of number of changes in
link status from on(3) to off(2)."
::= { s5EnPStatEntry 3 }
s5EnPStatLastSourceAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..6))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Source Address of the last readable frame
received by this port. If no frames have been
received by this port since the agent began
monitoring this port, the agent shall return
a string of length zero."
::= { s5EnPStatEntry 4 }
-- Segment Extension Statistics Table
s5EnSStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF S5EnSStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing Ethernet Segment
extension statistics. This table extends
table s5EnBStatTable for segments. The
entries in the table may come from several
different data sources. The number
of entries is determined by the number
of sources that can provide the information."
::= { s5EnStat 3 }
s5EnSStatEntry OBJECT-TYPE
SYNTAX S5EnSStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in Ethernet segment statistics table.
Entries can not be created or deleted via
SNMP."
INDEX { s5EnSStatSrcIndx }
::= { s5EnSStatTable 1 }
S5EnSStatEntry ::= SEQUENCE {
s5EnSStatSrcIndx SrcIndx,
s5EnSStatSegColls Counter32,
s5EnSStatSegRate INTEGER
}
s5EnSStatSrcIndx OBJECT-TYPE
SYNTAX SrcIndx
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the entry in the table.
This index identifies the source of the
information. Only those sources that provide
these statistics are in this table."
::= { s5EnSStatEntry 1 }
s5EnSStatSegColls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of number of transmit collision
events(one per packet activity) for a
segment (i.e., local channel or backplane
network)."
::= { s5EnSStatEntry 2 }
s5EnSStatSegRate OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
bps10m (2),
bps100m (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The segment speed type of this ethernet segment.
The following values are currently defined:
unknown (1) ------- unknown type
bps10m (2) ------- 10Mbps ethernet
bps100m (3) ------ 100Mbps ethernet"
::= { s5EnSStatEntry 3 }
END
Reference in New Issue View Git Blame Copy Permalink