mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
librenms-librenms/mibs/WLSX-IFEXT-MIB

682 lines
18 KiB
Plaintext
Raw Blame History

-- ArubaOS 3.2.0.0_16376
-- vim:set ts=4 sw=4:
WLSX-IFEXT-MIB DEFINITIONS ::= BEGIN
IMPORTS
TEXTUAL-CONVENTION,
MODULE-IDENTITY,
OBJECT-TYPE,
snmpModules,
Integer32,
Counter32,
IpAddress,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
TDomain,
DisplayString,
PhysAddress,
TAddress,
TimeInterval,
RowStatus,
StorageType,
TestAndIncr,
MacAddress,
TruthValue
FROM SNMPv2-TC
OBJECT-GROUP
FROM SNMPv2-CONF
ifIndex
FROM RFC1213-MIB
ArubaPoeState,
ArubaDot1dState,
ArubaPortMode,
ArubaVlanValidRange,
ArubaEnableValue,
ArubaOperStateValue,
ArubaPortType,
ArubaPortDuplex,
ArubaPortSpeed,
ArubaIfType
FROM ARUBA-TC
wlsxEnterpriseMibModules
FROM ARUBA-MIB;
wlsxIfExtMIB MODULE-IDENTITY
LAST-UPDATED "0704162151Z"
ORGANIZATION "Aruba Wireless Networks"
CONTACT-INFO
"Postal: 1322 Crossman Avenue
Sunnyvale, CA 94089
E-mail: dl-support@arubanetworks.com
Phone: +1 408 227 4500"
DESCRIPTION
"This MIB module defines MIB objects which provide
System level information about the Aruba controller."
REVISION "0704162151Z"
DESCRIPTION
"The initial revision."
::= { wlsxEnterpriseMibModules 3 }
wlsxIfExtGroup OBJECT IDENTIFIER ::= { wlsxIfExtMIB 1 }
-- Port Table defines all the physical ports in the controller.
wlsxIfExtPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxIfExtPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The table of processors contained by the controller.
"
::= { wlsxIfExtGroup 1 }
wlsxIfExtPortEntry OBJECT-TYPE
SYNTAX WlsxIfExtPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
An entry for one processor contained by the controller.
"
INDEX {ifExtSlotNumber, ifExtPortNumber}
::= { wlsxIfExtPortTable 1 }
WlsxIfExtPortEntry ::=
SEQUENCE {
ifExtSlotNumber Integer32,
ifExtPortNumber Integer32,
ifExtPortIfIndex Integer32,
ifExtAdminState ArubaEnableValue,
ifExtOperState INTEGER,
ifExtPoeState ArubaPoeState,
ifExtIsTrusted TruthValue,
ifExtDot1DState ArubaDot1dState,
ifExtMode ArubaPortMode,
ifExtAccessVlanId ArubaVlanValidRange,
ifExtTrunkNativeVlanId ArubaVlanValidRange,
ifExtTrunkIsAllowedAll TruthValue,
ifExtTrunkAllowedVlanList OCTET STRING,
ifExtIngressACLName DisplayString,
ifExtEgressACLName DisplayString,
ifExtSessionACLName DisplayString,
ifExtXsecVlan ArubaVlanValidRange,
ifExtIsMonitoring TruthValue,
ifExtIsMux TruthValue,
ifExtUserSlotNumber Integer32,
ifExtUserPortNumber Integer32,
ifExtPortSpeed ArubaPortSpeed,
ifExtPortDuplex ArubaPortDuplex,
ifExtPortType ArubaPortType,
ifExtDescr DisplayString
}
ifExtSlotNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This object represents the Physical Slot of the Interface.
"
::= { wlsxIfExtPortEntry 1 }
ifExtPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This object represents the Physical Port of the Interface.
"
::= { wlsxIfExtPortEntry 2 }
ifExtPortIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
This is the ifIndex in ifTable, representing this slot and port.
"
::= { wlsxIfExtPortEntry 3 }
ifExtAdminState OBJECT-TYPE
SYNTAX ArubaEnableValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The desired state of the interface.
"
::= { wlsxIfExtPortEntry 4 }
ifExtOperState OBJECT-TYPE
SYNTAX INTEGER{
up(1),
down(2),
testing(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The current operational state of the interface.
"
::= { wlsxIfExtPortEntry 5 }
ifExtPoeState OBJECT-TYPE
SYNTAX ArubaPoeState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The current state of the power over ethernet capability of the
port.
"
::= { wlsxIfExtPortEntry 6 }
ifExtIsTrusted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The object indicates if the port is used in the trusted side of the
network or the untrusted side.
"
::= { wlsxIfExtPortEntry 7 }
ifExtDot1DState OBJECT-TYPE
SYNTAX ArubaDot1dState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Current Dot1d state of the Port.
"
::= { wlsxIfExtPortEntry 8 }
ifExtMode OBJECT-TYPE
SYNTAX ArubaPortMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object indicates if the port is in a Trunk mode or access mode.
"
::= { wlsxIfExtPortEntry 9 }
ifExtAccessVlanId OBJECT-TYPE
SYNTAX ArubaVlanValidRange
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The VLAN Id when the port is in Access Mode.
"
::= { wlsxIfExtPortEntry 10 }
ifExtTrunkNativeVlanId OBJECT-TYPE
SYNTAX ArubaVlanValidRange
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The native VLAN Id of the Port, when the port is in dot1q mode.
"
::= { wlsxIfExtPortEntry 11 }
ifExtTrunkIsAllowedAll OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
When the mode of the port is Trunk, this Object indicates
if the port is part of all the configured Vlans.
"
::= { wlsxIfExtPortEntry 12 }
ifExtTrunkAllowedVlanList OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..512))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
A string of octets containing one bit per VLAN for a
total of 4096 VLANs in the management domain.
The most significant bit of the octet string is the
lowest value VLAN of 4096 VLANs.
By setting the bit(1) we indicate that the vlan is part of the
interface.
The most significant bit of the bitmap is transmitted
first. Note that if the length of this string is less than
512 octets, any 'missing' octets are assumed to contain
the value zero.
"
::= { wlsxIfExtPortEntry 13 }
ifExtIngressACLName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object represents the Ingress ACL name applied to the port.
An Empty string indicates that there is not ACL applied on this
port.
"
::= { wlsxIfExtPortEntry 14 }
ifExtEgressACLName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object represents the Egress ACL name applied to the port.
An Empty string indicates that there is not ACL applied on this
port.
"
::= { wlsxIfExtPortEntry 15 }
ifExtSessionACLName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object represents the Session ACL name applied to the port.
An Empty string indicates that there is not ACL applied on this
port.
"
::= { wlsxIfExtPortEntry 16 }
ifExtXsecVlan OBJECT-TYPE
SYNTAX ArubaVlanValidRange
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object indicates if the port is an Xsec Port.
"
::= { wlsxIfExtPortEntry 17 }
ifExtIsMonitoring OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object indicates if the port is used for Port monitoring.
"
::= { wlsxIfExtPortEntry 18 }
ifExtIsMux OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object indicates if the port is used as a MUX Port.
"
::= { wlsxIfExtPortEntry 19 }
ifExtUserSlotNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The user-visible (zero-based) slot number.
"
::= { wlsxIfExtPortEntry 20 }
ifExtUserPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The user-visible (zero-based) port number.
"
::= { wlsxIfExtPortEntry 21 }
ifExtPortSpeed OBJECT-TYPE
SYNTAX ArubaPortSpeed
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Speed of the Port.
"
::= { wlsxIfExtPortEntry 22 }
ifExtPortDuplex OBJECT-TYPE
SYNTAX ArubaPortDuplex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Duplexity of the Port.
"
::= { wlsxIfExtPortEntry 23 }
ifExtPortType OBJECT-TYPE
SYNTAX ArubaPortType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Type of the Port.
"
::= { wlsxIfExtPortEntry 24 }
ifExtDescr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
Port Description.
"
::= { wlsxIfExtPortEntry 25 }
-- VLAN Table defines all the VLAN in the controller.
wlsxIfExtVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxIfExtVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
"
::= { wlsxIfExtGroup 2 }
wlsxIfExtVlanEntry OBJECT-TYPE
SYNTAX WlsxIfExtVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
An entry for one processor contained by the controller.
"
INDEX {ifExtVlanId}
::= { wlsxIfExtVlanTable 1 }
WlsxIfExtVlanEntry ::=
SEQUENCE {
ifExtVlanId ArubaVlanValidRange,
ifExtVlanName DisplayString,
ifExtVlanStatus RowStatus
}
ifExtVlanId OBJECT-TYPE
SYNTAX ArubaVlanValidRange
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This object represents the VLAN Id of the Interface.
"
::= { wlsxIfExtVlanEntry 1 }
ifExtVlanName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Name of the VLAN.
"
::= { wlsxIfExtVlanEntry 2 }
ifExtVlanStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
A Row status Object used to create/modify the row.
"
::= { wlsxIfExtVlanEntry 3 }
-- VLAN Port Member Table defines port membership in the vlan.
wlsxIfExtVlanMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxIfExtVlanMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
"
::= { wlsxIfExtGroup 3 }
wlsxIfExtVlanMemberEntry OBJECT-TYPE
SYNTAX WlsxIfExtVlanMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
An entry for one processor contained by the controller.
"
INDEX {ifExtVlanId, ifIndex}
::= { wlsxIfExtVlanMemberTable 1 }
WlsxIfExtVlanMemberEntry ::=
SEQUENCE {
ifExtVlanMemberStatus RowStatus,
ifExtVlanMemberSlot Integer32,
ifExtVlanMemberPort Integer32,
ifExtVlanMemberType ArubaIfType
}
ifExtVlanMemberStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
A Row status Object used to create/modify and indicate the
status row.
"
::= { wlsxIfExtVlanMemberEntry 1 }
ifExtVlanMemberSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The slot index of the slot referred to by this row (1-based).
"
::= { wlsxIfExtVlanMemberEntry 2 }
ifExtVlanMemberPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The slot index of the slot referred to by this row (1-based).
"
::= { wlsxIfExtVlanMemberEntry 3 }
ifExtVlanMemberType OBJECT-TYPE
SYNTAX ArubaIfType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The VLAN member type.
"
::= { wlsxIfExtVlanMemberEntry 4 }
-- VLAN Interface Table defines Layer3 VLAN Interfaces.
wlsxIfExtVlanInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlsxIfExtVlanInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
"
::= { wlsxIfExtGroup 4 }
wlsxIfExtVlanInterfaceEntry OBJECT-TYPE
SYNTAX WlsxIfExtVlanInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
An entry for one processor contained by the controller.
"
INDEX {ifExtVlanId}
::= { wlsxIfExtVlanInterfaceTable 1 }
WlsxIfExtVlanInterfaceEntry ::=
SEQUENCE {
ifExtVlanInterfaceIfIndex Integer32,
ifExtVlanInterfaceDescription DisplayString,
ifExtVlanInterfaceBWContract DisplayString,
ifExtVlanInterfaceAdminState ArubaEnableValue,
ifExtVlanInterfaceOperState ArubaOperStateValue,
ifExtVlanInterfaceIpAddress IpAddress,
ifExtVlanInterfaceIpMask IpAddress,
ifExtVlanInterfaceIsLocalArp ArubaEnableValue,
ifExtVlanInterfaceStatus RowStatus,
ifExtVlanInterfaceIpRouting ArubaEnableValue,
ifExtVlanInterfaceIpNatInside ArubaEnableValue,
ifExtVlanInterfaceIpIgmpSnooping ArubaEnableValue
}
ifExtVlanInterfaceIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This is the ifIndex in ifTable, representing VLAN Interface.
"
::= { wlsxIfExtVlanInterfaceEntry 1 }
ifExtVlanInterfaceDescription OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This Object indicates the discription of the Interface.
"
::= { wlsxIfExtVlanInterfaceEntry 2 }
ifExtVlanInterfaceBWContract OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This Object indicates the Bandwidth contract on the interface.
"
::= { wlsxIfExtVlanInterfaceEntry 3 }
ifExtVlanInterfaceAdminState OBJECT-TYPE
SYNTAX ArubaEnableValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This Object indicates the administrative state of the Interface.
"
::= { wlsxIfExtVlanInterfaceEntry 4 }
ifExtVlanInterfaceOperState OBJECT-TYPE
SYNTAX ArubaOperStateValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This Object indicates the operational state of the Interface.
"
::= { wlsxIfExtVlanInterfaceEntry 5 }
ifExtVlanInterfaceIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This Object indicates the IP Address of the Interface.
"
::= { wlsxIfExtVlanInterfaceEntry 6 }
ifExtVlanInterfaceIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This Object indicates the subnet mask of the Interface.
"
::= { wlsxIfExtVlanInterfaceEntry 7 }
ifExtVlanInterfaceIsLocalArp OBJECT-TYPE
SYNTAX ArubaEnableValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This Object indicates if the Local Arp is set on the Interface.
"
::= { wlsxIfExtVlanInterfaceEntry 8 }
ifExtVlanInterfaceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
A Row status Object used to create/modify and indicate the
status row.
"
::= { wlsxIfExtVlanInterfaceEntry 9}
ifExtVlanInterfaceIpRouting OBJECT-TYPE
SYNTAX ArubaEnableValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This Object indicates if the IP routing is set on the Interface.
"
::= { wlsxIfExtVlanInterfaceEntry 10 }
ifExtVlanInterfaceIpNatInside OBJECT-TYPE
SYNTAX ArubaEnableValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This Object indicates if the IP nat inside is set on the Interface.
"
::= { wlsxIfExtVlanInterfaceEntry 11 }
ifExtVlanInterfaceIpIgmpSnooping OBJECT-TYPE
SYNTAX ArubaEnableValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
This Object indicates if the IP IGMP snooping is set on the Interface.
"
::= { wlsxIfExtVlanInterfaceEntry 12 }
END
Reference in New Issue View Git Blame Copy Permalink