mirror of
https://github.com/librenms/librenms.git
synced 2024-10-07 16:52:45 +00:00
10fed1baf0
git-svn-id: http://www.observium.org/svn/observer/trunk@413 61d68cd4-352d-0410-923a-c4978735b2b8
4582 lines
142 KiB
Plaintext
4582 lines
142 KiB
Plaintext
ISIS-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
TEXTUAL-CONVENTION, RowStatus, TruthValue, TimeStamp
|
|
FROM SNMPv2-TC -- RFC2579
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
|
|
Unsigned32, Counter32, mib-2
|
|
FROM SNMPv2-SMI -- RFC2578
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF -- RFC2580
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB -- RFC2571
|
|
IndexInteger, IndexIntegerNextFree
|
|
FROM DIFFSERV-MIB -- RFC3289
|
|
InterfaceIndex
|
|
FROM IF-MIB -- RFC2863
|
|
InetAddressType, InetAddress, InetAddressPrefixLength
|
|
FROM INET-ADDRESS-MIB; -- RFC3291
|
|
|
|
isisMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200604040000Z" -- April 4, 2006, midnight
|
|
ORGANIZATION "IETF IS-IS for IP Internets Working Group"
|
|
CONTACT-INFO
|
|
"IS-IS for IP Internets working Group
|
|
http://www.ietf.org/html.charters/isis-charter.html
|
|
isis-wg@ietf.org
|
|
|
|
Jeff Parker
|
|
Department of Computer Science
|
|
Middlebury College,
|
|
Middlebury, Vermont 05753
|
|
jeffp at middlbury dot edu"
|
|
|
|
DESCRIPTION
|
|
"This document describes a management information base for
|
|
the IS-IS Routing protocol, as described in ISO 10589,
|
|
when it is used to construct routing tables for IP
|
|
networks, as described in RFC 1195.
|
|
|
|
This document is based on a 1994 IETF document by Chris
|
|
Gunner. This version has been modified to include
|
|
current syntax, to exclude portions of the protocol that
|
|
are not relevant to IP, and to add management support for
|
|
current practice.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Copyright (C) The Internet Society (2006). This version
|
|
of this MIB module is part of RFC 4444; see the RFC
|
|
itself for full legal notices."
|
|
|
|
REVISION "200604040000Z" -- April 4, 2006, midnight
|
|
|
|
DESCRIPTION
|
|
"Initial version, published as RFC 4444."
|
|
::= { mib-2 138 }
|
|
|
|
-- Top-level structure of the MIB
|
|
|
|
isisNotifications OBJECT IDENTIFIER ::= { isisMIB 0 }
|
|
isisObjects OBJECT IDENTIFIER ::= { isisMIB 1 }
|
|
isisConformance OBJECT IDENTIFIER ::= { isisMIB 2 }
|
|
|
|
-- OBJECT IDENTIFIER definitions
|
|
|
|
-- System wide attributes.
|
|
isisSystem OBJECT IDENTIFIER ::= { isisObjects 1 }
|
|
|
|
-- Attributes associated with the domain or with the area.
|
|
isisSysLevel OBJECT IDENTIFIER ::= { isisObjects 2 }
|
|
|
|
-- Attributes associated with one Circuit
|
|
isisCirc OBJECT IDENTIFIER ::= { isisObjects 3 }
|
|
|
|
-- Attributes associated with area or domain relevant within a Circuit.
|
|
isisCircLevelValues OBJECT IDENTIFIER ::= { isisObjects 4 }
|
|
|
|
-- System and circuit counters.
|
|
isisCounters OBJECT IDENTIFIER ::= { isisObjects 5 }
|
|
|
|
-- Attributes associated with an adjacent Protocol Peer.
|
|
isisISAdj OBJECT IDENTIFIER ::= { isisObjects 6 }
|
|
|
|
-- Attributes associated with a configured address.
|
|
isisReachAddr OBJECT IDENTIFIER ::= { isisObjects 7 }
|
|
|
|
-- Attributes associated with IP routes learned by
|
|
-- configuration or through another protocol.
|
|
isisIPReachAddr OBJECT IDENTIFIER ::= { isisObjects 8 }
|
|
|
|
-- The collection of Link State PDUs known to the Intermediate System
|
|
isisLSPDataBase OBJECT IDENTIFIER ::= { isisObjects 9 }
|
|
|
|
-- Objects included in Notifications.
|
|
isisNotification OBJECT IDENTIFIER ::= { isisObjects 10 }
|
|
|
|
|
|
|
|
-- Type definitions
|
|
|
|
IsisOSINSAddress ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"OSI Network Service Address, e.g., NSAP, SNPA, or Network
|
|
Entity Title"
|
|
SYNTAX OCTET STRING (SIZE(0..20))
|
|
|
|
IsisSystemID ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID for an Intermediate System. This should
|
|
be unique within a network, and is included
|
|
in all PDUs originated by an Intermediate System.
|
|
The protocol does not place any meanings upon
|
|
the bits, other than using ordering to break
|
|
ties in electing a Designated IS on a LAN."
|
|
REFERENCE "{ISIS.aoi systemId (119)}"
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
|
|
IsisLinkStatePDUID ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 8-byte Link State PDU (LSP) ID,
|
|
consisting of the 6-byte SystemID of the
|
|
originating IS; a one-byte PseudoNode ID,
|
|
which is 0 unless the LSP represents the
|
|
topology of a LAN; and a one-byte LSP
|
|
fragment number that is issued in sequence,
|
|
starting with 0. Non-zero PseudoNode IDs
|
|
need to be unique to the IS but need not
|
|
match the IfIndex."
|
|
REFERENCE "{See section 9.8 of ISO 10589}"
|
|
SYNTAX OCTET STRING (SIZE(8))
|
|
|
|
IsisAdminState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type used in enabling and disabling a row."
|
|
SYNTAX INTEGER
|
|
{
|
|
on(1),
|
|
off(2)
|
|
}
|
|
|
|
IsisLSPBuffSize ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
|
|
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer sub-range for maximum LSP size."
|
|
SYNTAX Unsigned32 (512..16000)
|
|
|
|
IsisLevelState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"States of the IS-IS protocol."
|
|
SYNTAX INTEGER
|
|
{
|
|
off (1),
|
|
on (2),
|
|
waiting (3),
|
|
overloaded(4)
|
|
}
|
|
|
|
IsisSupportedProtocol ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Types of network protocol supported by Integrated IS-IS.
|
|
The values for ISO8473 and IP are those registered for
|
|
these protocols in ISO TR9577."
|
|
REFERENCE "{See section 5.3.1 of RFC 1195}"
|
|
SYNTAX INTEGER
|
|
{
|
|
iso8473(129),
|
|
ipV6(142),
|
|
ip(204)
|
|
}
|
|
|
|
IsisDefaultMetric ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer sub-range for default metric for single hop.
|
|
ISO 10589 provides for 4 types of metric. Only the
|
|
'default' metric is used in practice."
|
|
REFERENCE "{See section 7.2.2 of ISO 10589}"
|
|
SYNTAX Unsigned32 (0..63)
|
|
|
|
IsisWideMetric ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Wide metric for IS Neighbors. ISO 10589 provides a
|
|
6-bit metric. Traffic Engineering extensions provide
|
|
24-bit metrics."
|
|
|
|
|
|
|
|
REFERENCE "{See section 3 of RFC 3784}"
|
|
SYNTAX Unsigned32 (0..16777215)
|
|
|
|
IsisFullMetric ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Full metric for IP Routes. Traffic Engineering extensions
|
|
provide 32-bit metrics."
|
|
REFERENCE "{See section 4 of RFC 3784}"
|
|
SYNTAX Unsigned32
|
|
|
|
IsisMetricType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Is this an Internal or External Metric?"
|
|
REFERENCE "{See section 7.2.2 of ISO 10589}"
|
|
SYNTAX INTEGER
|
|
{
|
|
internal(1),
|
|
external(2)
|
|
}
|
|
|
|
IsisMetricStyle ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Do we use RFC 1195 style metrics or wide metrics?"
|
|
REFERENCE "{See section 5 of RFC 3787}"
|
|
SYNTAX INTEGER
|
|
{
|
|
narrow(1),
|
|
wide(2),
|
|
both(3)
|
|
}
|
|
|
|
IsisISLevel ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies a level."
|
|
REFERENCE "{See definitions 3.6.1 and 3.6.11 of ISO 10589}"
|
|
SYNTAX INTEGER
|
|
{
|
|
area(1), -- L1
|
|
domain(2) -- L2
|
|
}
|
|
|
|
IsisLevel ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
|
|
|
|
|
|
DESCRIPTION
|
|
"Identifies one or more levels."
|
|
REFERENCE "{See definitions 3.6.1 and 3.6.11 of ISO 10589}"
|
|
SYNTAX INTEGER
|
|
{
|
|
level1(1),
|
|
level2(2),
|
|
level1and2(3)
|
|
}
|
|
|
|
IsisPDUHeader ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A block to contain the header from a PDU."
|
|
SYNTAX OCTET STRING (SIZE(0..64))
|
|
|
|
IsisCircuitID ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ID for a circuit."
|
|
REFERENCE "{See section 7.2.7 of ISO 10589}"
|
|
SYNTAX OCTET STRING (SIZE(0|7))
|
|
|
|
IsisISPriority ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Integer sub-range for IS-IS priority."
|
|
REFERENCE "{See section 9.5 of ISO 10589}"
|
|
SYNTAX Unsigned32 (0..127)
|
|
|
|
IsisUnsigned16TC ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Unsigned32 further restricted to 16 bits. Note that
|
|
the ASN.1 BER encoding may still require 24 bits for
|
|
some values."
|
|
SYNTAX Unsigned32 (0..65535)
|
|
|
|
IsisUnsigned8TC ::= TEXTUAL-CONVENTION
|
|
DISPLAY-HINT "d"
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Unsigned32 further restricted to 8 bits. Note that
|
|
the ASN.1 BER encoding may still require 16 bits for
|
|
some values."
|
|
SYNTAX Unsigned32 (0..255)
|
|
|
|
|
|
|
|
-- Behavior Definitions
|
|
|
|
-- ResettingTimer behavior definition
|
|
--
|
|
|
|
-- "This behavior applies to objects that specify the interval
|
|
-- between events in the operation of the protocol state machine.
|
|
-- If the value of such an object is set to a new value while
|
|
-- the protocol state machine is in operation, the implementation
|
|
-- shall take the necessary steps to ensure that for any time
|
|
-- interval that was in progress when the value of the
|
|
-- corresponding object was changed, the next expiration of that
|
|
-- interval takes place the specified time after the original
|
|
-- start of that interval, or immediately, whichever is later.
|
|
-- The precision with which this time shall be implemented shall
|
|
-- be the same as that associated with the basic operation of
|
|
-- the timer object."
|
|
|
|
-- ReplaceOnlyWhileDisabled behavior definition
|
|
-- "This behavior applies to objects that may not be modified
|
|
-- while the corresponding table row's variable of type
|
|
-- IsisAdminState is in state on."
|
|
|
|
-- ManualOrAutomatic behavior definition
|
|
-- "This behavior applies to objects that are read-write
|
|
-- if the object was created manually. Objects that were
|
|
-- created automatically that have this behavior are
|
|
-- read-only.
|
|
|
|
isisSysObject OBJECT IDENTIFIER ::= { isisSystem 1 }
|
|
|
|
isisSysVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
unknown(0),
|
|
one(1)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The version number of the IS-IS protocol that
|
|
is implemented."
|
|
REFERENCE "{ISIS.aoi version (1)}"
|
|
DEFVAL { one }
|
|
::= { isisSysObject 1 }
|
|
|
|
isisSysLevelType OBJECT-TYPE
|
|
SYNTAX IsisLevel
|
|
|
|
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"At which levels is the Intermediate System
|
|
running? This object may not be modified when
|
|
the isisSysAdminState variable is in state 'on'
|
|
for this Intermediate System.
|
|
|
|
Configured values MUST survive an agent reboot."
|
|
REFERENCE "{ISIS.aoi iSType (2)}"
|
|
DEFVAL { level1and2 }
|
|
::= { isisSysObject 2 }
|
|
|
|
isisSysID OBJECT-TYPE
|
|
SYNTAX IsisSystemID
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID for this Intermediate System.
|
|
This value is appended to each of the
|
|
area addresses to form the Network Entity Titles.
|
|
The derivation of a value for this object is
|
|
implementation specific. Some implementations may
|
|
automatically assign values and not permit an
|
|
SNMP write, while others may require the value
|
|
to be set manually.
|
|
|
|
Configured values MUST survive an agent reboot."
|
|
REFERENCE "{ISIS.aoi systemId (119)}"
|
|
::= { isisSysObject 3 }
|
|
|
|
isisSysMaxPathSplits OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..32)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum number of paths with equal routing metric value
|
|
which it is permitted to split between. This object
|
|
may not be modified when the isisSysAdminState variable
|
|
is in state 'on' for this Intermediate System.
|
|
|
|
Configured values MUST survive an agent reboot."
|
|
REFERENCE "{ISIS.aoi maximumPathSplits (3)}"
|
|
DEFVAL { 2 }
|
|
::= { isisSysObject 4 }
|
|
|
|
isisSysMaxLSPGenInt OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65235)
|
|
|
|
|
|
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum interval, in seconds, between generated LSPs
|
|
by this Intermediate System. This object follows
|
|
the ResettingTimer behavior. The value must be
|
|
greater than any value configured for
|
|
isisSysLevelMinLSPGenInt, and should be at least 300
|
|
seconds less than isisSysMaxAge.
|
|
|
|
Configured values MUST survive an agent reboot."
|
|
REFERENCE "{ISIS.aoi maximumLSPGenerationInterval (6)}"
|
|
DEFVAL { 900 }
|
|
::= { isisSysObject 5 }
|
|
|
|
isisSysPollESHelloRate OBJECT-TYPE
|
|
SYNTAX IsisUnsigned16TC (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value, in seconds, to be used for the suggested ES
|
|
configuration timer in ISH PDUs when soliciting the ES
|
|
configuration.
|
|
|
|
Configured values MUST survive an agent reboot."
|
|
REFERENCE "{ISIS.aoi pollESHelloRate (13)}"
|
|
DEFVAL { 50 }
|
|
::= { isisSysObject 6 }
|
|
|
|
isisSysWaitTime OBJECT-TYPE
|
|
SYNTAX IsisUnsigned16TC (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of seconds to delay in state 'waiting' before
|
|
entering the state 'on'. This object follows the
|
|
ResettingTimer behavior.
|
|
|
|
Configured values MUST survive an agent reboot."
|
|
REFERENCE "{ISIS.aoi waitingTime (15)}"
|
|
DEFVAL { 60 }
|
|
::= { isisSysObject 7 }
|
|
|
|
isisSysAdminState OBJECT-TYPE
|
|
SYNTAX IsisAdminState
|
|
|
|
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative state of this Intermediate
|
|
System. Setting this object to the value 'on'
|
|
when its current value is 'off' enables
|
|
the Intermediate System.
|
|
|
|
Configured values MUST survive an agent reboot."
|
|
DEFVAL { off }
|
|
::= { isisSysObject 8 }
|
|
|
|
isisSysL2toL1Leaking OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, allow the router to leak L2 routes into L1.
|
|
|
|
Configured values MUST survive an agent reboot."
|
|
DEFVAL { false }
|
|
::= { isisSysObject 9 }
|
|
|
|
isisSysMaxAge OBJECT-TYPE
|
|
SYNTAX IsisUnsigned16TC (350..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Value to place in RemainingLifeTime field of
|
|
the LSPs we generate.
|
|
This should be at least 300 seconds greater than
|
|
isisSysMaxLSPGenInt.
|
|
|
|
Configured values MUST survive an agent reboot."
|
|
DEFVAL { 1200 }
|
|
::= { isisSysObject 10 }
|
|
|
|
isisSysReceiveLSPBufferSize OBJECT-TYPE
|
|
SYNTAX IsisUnsigned16TC (1492..16000)
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Size of the largest buffer we are designed or
|
|
configured to store. This should be at least
|
|
as big as the maximum isisSysLevelOrigLSPBuffSize
|
|
supported by the system.
|
|
|
|
|
|
|
|
If resources allow, we will store and flood LSPs
|
|
larger than isisSysReceiveLSPBufferSize, as this
|
|
can help avoid problems in networks with different
|
|
values for isisSysLevelOrigLSPBuffSize.
|
|
|
|
Configured values MUST survive an agent reboot."
|
|
DEFVAL { 1492 }
|
|
::= { isisSysObject 11 }
|
|
|
|
isisSysProtSupported OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
iso8473 (0),
|
|
ipv4 (1),
|
|
ipv6 (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This attribute contains the set of protocols
|
|
supported by this Intermediate System."
|
|
::= { isisSysObject 12 }
|
|
|
|
isisSysNotificationEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If this object is set to true(1), then it enables
|
|
the emission of IS-IS Notifications. If it is
|
|
set to false(2), these notifications are not sent.
|
|
|
|
Configured values MUST survive an agent reboot."
|
|
DEFVAL { true }
|
|
::= { isisSysObject 13 }
|
|
|
|
-- The Level 1 Manual Area Address Table
|
|
|
|
isisManAreaAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsisManAreaAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of manual area addresses configured on this
|
|
Intermediate System.
|
|
|
|
At least one row in which the value of
|
|
isisManAreaAddrExistState is active must be present.
|
|
The maximum number of rows in this table for
|
|
|
|
|
|
|
|
which the object isisManAreaAddrExistState has the
|
|
value active is 3.
|
|
|
|
An attempt to create more than 3 rows of
|
|
isisManAreaAddrEntry with state 'active' in one
|
|
instance of the IS-IS protocol should
|
|
return inconsistentValue."
|
|
REFERENCE "{ISIS.aoi manualAreaAddresses (10)}"
|
|
::= { isisSystem 2 }
|
|
|
|
isisManAreaAddrEntry OBJECT-TYPE
|
|
SYNTAX IsisManAreaAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one area address manually configured
|
|
on this system.
|
|
|
|
Dynamically created rows MUST survive an agent reboot."
|
|
INDEX { isisManAreaAddr }
|
|
::= { isisManAreaAddrTable 1 }
|
|
|
|
IsisManAreaAddrEntry ::=
|
|
SEQUENCE {
|
|
isisManAreaAddr
|
|
IsisOSINSAddress,
|
|
isisManAreaAddrExistState
|
|
RowStatus
|
|
}
|
|
|
|
isisManAreaAddr OBJECT-TYPE
|
|
SYNTAX IsisOSINSAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A manually configured area address for this system.
|
|
|
|
Note: An index for the entry {1, {49.0001} active} in
|
|
this table would be the ordered pair
|
|
(1, (0x03 0x49 0x00 0x01)), as the length of an octet
|
|
string is part of the OID."
|
|
::= { isisManAreaAddrEntry 1 }
|
|
|
|
isisManAreaAddrExistState OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
|
|
|
|
"The state of the isisManAreaAddrEntry. If the
|
|
isisSysAdminState for this Intermediate System is 'on' and
|
|
an attempt is made to set this object to the value
|
|
'destroy' or 'notInService' when this is the only
|
|
isisManAreaAddrEntry in state 'active' for this
|
|
Intermediate System should return inconsistentValue.
|
|
|
|
A row entry cannot be modified when the value of this
|
|
object is 'active'."
|
|
::= { isisManAreaAddrEntry 2 }
|
|
|
|
-- The Level 1 Area Address Table
|
|
|
|
-- The Level 1 Area Address Table contains the
|
|
-- union of the sets of relevant area addresses configured
|
|
-- or learned from Level 1 LSPs received by this Intermediate System.
|
|
|
|
isisAreaAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsisAreaAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The union of the sets of area addresses reported in all
|
|
Level 1 LSPs with fragment number zero generated by this
|
|
Intermediate System, or received from other Intermediate
|
|
Systems that are reachable via Level 1 routing."
|
|
REFERENCE "{ISIS.aoi areaAddresses (18)}"
|
|
::= { isisSystem 3 }
|
|
|
|
isisAreaAddrEntry OBJECT-TYPE
|
|
SYNTAX IsisAreaAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one area address reported in a
|
|
Level 1 LSP generated or received by this Intermediate
|
|
System.
|
|
|
|
Dynamically learned rows do not survive an agent reboot."
|
|
INDEX { isisAreaAddr }
|
|
::= { isisAreaAddrTable 1 }
|
|
|
|
IsisAreaAddrEntry ::=
|
|
SEQUENCE {
|
|
isisAreaAddr
|
|
IsisOSINSAddress
|
|
}
|
|
|
|
|
|
|
|
|
|
isisAreaAddr OBJECT-TYPE
|
|
SYNTAX IsisOSINSAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An area address reported in a Level 1 LSP."
|
|
::= { isisAreaAddrEntry 1 }
|
|
|
|
-- The Summary Address Table
|
|
|
|
-- The Summary Address Table contains the set of summary
|
|
-- addresses manually configured for the Intermediate System.
|
|
--
|
|
-- This is used to control leaking L1 routes into L2.
|
|
|
|
isisSummAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsisSummAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of IP summary addresses to use in forming
|
|
summary TLVs originated by this Intermediate System.
|
|
|
|
An administrator may use a summary address to combine
|
|
and modify IP Reachability announcements. If the
|
|
Intermediate system can reach any subset of the summary
|
|
address, the summary address MUST be announced instead,
|
|
at the configured metric."
|
|
::= { isisSystem 4 }
|
|
|
|
isisSummAddrEntry OBJECT-TYPE
|
|
SYNTAX IsisSummAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one IP summary address.
|
|
|
|
Dynamically created rows MUST survive an agent reboot.
|
|
|
|
Implementers need to be aware that if the total number
|
|
of elements (octets or sub-identifiers) in
|
|
isisSummAddress and isisSummAddrPrefixLen is too great,
|
|
then OIDs of column instances in this table will have
|
|
more than 128 subidentifiers and cannot be accessed
|
|
using SNMPv1, SNMPv2c, or SNMPv3."
|
|
INDEX { isisSummAddressType,
|
|
isisSummAddress,
|
|
isisSummAddrPrefixLen }
|
|
|
|
|
|
|
|
::= { isisSummAddrTable 1 }
|
|
|
|
IsisSummAddrEntry ::=
|
|
SEQUENCE {
|
|
isisSummAddressType
|
|
InetAddressType,
|
|
isisSummAddress
|
|
InetAddress,
|
|
isisSummAddrPrefixLen
|
|
InetAddressPrefixLength,
|
|
isisSummAddrExistState
|
|
RowStatus,
|
|
isisSummAddrMetric
|
|
IsisDefaultMetric,
|
|
isisSummAddrFullMetric
|
|
IsisFullMetric
|
|
}
|
|
|
|
isisSummAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Type of IP address for this summary address."
|
|
::= { isisSummAddrEntry 1 }
|
|
|
|
isisSummAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address value for this summary address.
|
|
The address must not contain any set host bits
|
|
(bits set after the address prefix determined by
|
|
isisSummAddrPrefixLen).
|
|
|
|
The type of this address is determined by the value of
|
|
the isisSummAddressType object."
|
|
::= { isisSummAddrEntry 2 }
|
|
|
|
isisSummAddrPrefixLen OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Length of the IP NetMask for this summary address.
|
|
|
|
The values for the index objects isisSummAddress and
|
|
|
|
|
|
|
|
isisSummAddrPrefixLen must be consistent. When the value
|
|
of isisSummAddress (excluding the zone index, if one
|
|
is present) is x, then the bitwise logical-AND
|
|
of x with the value of the mask formed from the
|
|
corresponding index object isisSummAddrPrefixLen MUST be
|
|
equal to x. If not, then the index pair is not
|
|
consistent, and an inconsistentName error must be
|
|
returned on SET or CREATE requests."
|
|
::= { isisSummAddrEntry 3 }
|
|
|
|
isisSummAddrExistState OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The existence state of this summary address. Support
|
|
for 'createAndWait' and 'notInService' is not required.
|
|
|
|
A row entry cannot be modified when the value of this
|
|
object is 'active'."
|
|
::= { isisSummAddrEntry 4 }
|
|
|
|
isisSummAddrMetric OBJECT-TYPE
|
|
SYNTAX IsisDefaultMetric
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric value to announce this summary
|
|
address within LSPs generated by this system."
|
|
DEFVAL { 20 }
|
|
::= { isisSummAddrEntry 5 }
|
|
|
|
isisSummAddrFullMetric OBJECT-TYPE
|
|
SYNTAX IsisFullMetric
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The wide metric value to announce this summary
|
|
address within LSPs generated by this system."
|
|
DEFVAL { 20 }
|
|
::= { isisSummAddrEntry 6 }
|
|
|
|
-- The Redistribution table defines addresses that should be
|
|
-- leaked from L2 to L1 if isisSysL2toL1Leaking is enabled.
|
|
|
|
isisRedistributeAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsisRedistributeAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
|
|
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table provides criteria to decide if a route should
|
|
be leaked from L2 to L1 when Domain Wide Prefix leaking is
|
|
enabled.
|
|
|
|
Addresses that match the summary mask in the table MUST
|
|
be announced at L1 by routers when isisSysL2toL1Leaking
|
|
is enabled. Routes that fall into the ranges specified
|
|
are announced as is, without being summarized. Routes
|
|
that do not match a summary mask are not announced."
|
|
::= { isisSystem 5 }
|
|
|
|
isisRedistributeAddrEntry OBJECT-TYPE
|
|
SYNTAX IsisRedistributeAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one configured IP summary
|
|
address to manage leaking L2 addresses into L1.
|
|
|
|
Dynamically created rows MUST survive an agent reboot.
|
|
|
|
Implementers need to be aware that if the total number
|
|
of elements (octets or sub-identifiers) in
|
|
isisRedistributeAddrAddress and
|
|
isisRedistributeAddrPrefixLen is too great, then OIDs
|
|
of column instances in this table will have more than
|
|
128 subidentifiers and cannot be accessed using SNMPv1,
|
|
SNMPv2c, or SNMPv3."
|
|
INDEX { isisRedistributeAddrType,
|
|
isisRedistributeAddrAddress,
|
|
isisRedistributeAddrPrefixLen }
|
|
::= { isisRedistributeAddrTable 1 }
|
|
|
|
IsisRedistributeAddrEntry ::=
|
|
SEQUENCE {
|
|
isisRedistributeAddrType
|
|
InetAddressType,
|
|
isisRedistributeAddrAddress
|
|
InetAddress,
|
|
isisRedistributeAddrPrefixLen
|
|
InetAddressPrefixLength,
|
|
isisRedistributeAddrExistState
|
|
RowStatus
|
|
}
|
|
|
|
isisRedistributeAddrType OBJECT-TYPE
|
|
|
|
|
|
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Type of IP address for this summary address."
|
|
::= { isisRedistributeAddrEntry 1 }
|
|
|
|
isisRedistributeAddrAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP Address value for this summary address.
|
|
The type of this address is determined by the
|
|
value of the isisRedistributeAddrType object.
|
|
The address must not contain any set host bits -
|
|
bits set after the address prefix determined by
|
|
isisRedistributeAddrPrefixLen."
|
|
|
|
::= { isisRedistributeAddrEntry 2 }
|
|
|
|
isisRedistributeAddrPrefixLen OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Length of the IP NetMask for this summary address.
|
|
|
|
The values for the index objects
|
|
isisRedistributeAddrAddress and
|
|
isisRedistributeAddrPrefixLen must be consistent.
|
|
When the value of isisRedistributeAddrAddress
|
|
(excluding the zone index, if one is present) is x,
|
|
then the bitwise logical-AND of x with the value of
|
|
the mask formed from the corresponding index object
|
|
isisRedistributeAddrPrefixLen MUST be equal to x.
|
|
If not, then the index pair is not consistent, and an
|
|
inconsistentName error must be returned on SET or
|
|
CREATE requests."
|
|
|
|
::= { isisRedistributeAddrEntry 3 }
|
|
|
|
isisRedistributeAddrExistState OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The existence state of this summary address. Support
|
|
|
|
|
|
|
|
for createAndWait and notInService is not required.
|
|
|
|
A row entry cannot be modified when the value of this
|
|
object is 'active'."
|
|
::= { isisRedistributeAddrEntry 4 }
|
|
|
|
-- The Router Table keeps track of hostnames and router IDs
|
|
-- associated with Intermediate Systems in the area and domain.
|
|
|
|
isisRouterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsisRouterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The set of hostnames and router ID."
|
|
::= { isisSystem 6 }
|
|
|
|
isisRouterEntry OBJECT-TYPE
|
|
SYNTAX IsisRouterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry tracks information about one Intermediate
|
|
System at one level.
|
|
|
|
Dynamically learned rows do not survive an agent reboot."
|
|
INDEX { isisRouterSysID,
|
|
isisRouterLevel }
|
|
::= { isisRouterTable 1 }
|
|
|
|
IsisRouterEntry ::=
|
|
SEQUENCE {
|
|
isisRouterSysID
|
|
IsisSystemID,
|
|
isisRouterLevel
|
|
IsisISLevel,
|
|
isisRouterHostName
|
|
SnmpAdminString,
|
|
isisRouterID
|
|
Unsigned32
|
|
}
|
|
|
|
isisRouterSysID OBJECT-TYPE
|
|
SYNTAX IsisSystemID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The System ID of the Intermediate System."
|
|
|
|
|
|
|
|
::= { isisRouterEntry 1 }
|
|
|
|
isisRouterLevel OBJECT-TYPE
|
|
SYNTAX IsisISLevel
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The level at which the information about this
|
|
Intermediate System was received."
|
|
::= { isisRouterEntry 2 }
|
|
|
|
isisRouterHostName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The hostname listed in the LSP, or a zero-length
|
|
string if none."
|
|
::= { isisRouterEntry 3 }
|
|
|
|
isisRouterID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Router ID found in the LSP, or zero if none."
|
|
::= { isisRouterEntry 4 }
|
|
|
|
-- The System Level Table
|
|
-- This table captures level-specific information about the system
|
|
|
|
isisSysLevelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsisSysLevelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Level specific information about the System."
|
|
::= { isisSysLevel 1 }
|
|
|
|
isisSysLevelEntry OBJECT-TYPE
|
|
SYNTAX IsisSysLevelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each row describes variables configured for Area or Domain.
|
|
|
|
Configured values MUST survive an agent reboot."
|
|
INDEX { isisSysLevelIndex }
|
|
|
|
|
|
|
|
::= { isisSysLevelTable 1 }
|
|
|
|
IsisSysLevelEntry ::=
|
|
SEQUENCE {
|
|
isisSysLevelIndex
|
|
IsisISLevel,
|
|
isisSysLevelOrigLSPBuffSize
|
|
IsisLSPBuffSize,
|
|
isisSysLevelMinLSPGenInt
|
|
IsisUnsigned16TC,
|
|
isisSysLevelState
|
|
IsisLevelState,
|
|
isisSysLevelSetOverload
|
|
TruthValue,
|
|
isisSysLevelSetOverloadUntil
|
|
Unsigned32,
|
|
isisSysLevelMetricStyle
|
|
IsisMetricStyle,
|
|
isisSysLevelSPFConsiders
|
|
IsisMetricStyle,
|
|
isisSysLevelTEEnabled
|
|
TruthValue
|
|
}
|
|
|
|
isisSysLevelIndex OBJECT-TYPE
|
|
SYNTAX IsisISLevel
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The level that this entry describes."
|
|
::= { isisSysLevelEntry 1 }
|
|
|
|
isisSysLevelOrigLSPBuffSize OBJECT-TYPE
|
|
SYNTAX IsisLSPBuffSize
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum size of LSPs and SNPs originated by
|
|
this Intermediate System at this level. This
|
|
object may not be modified when the isisSysAdminState
|
|
variable is in state 'on' for this Intermediate System."
|
|
REFERENCE "{ISIS.aoi originatingL1LSPBufferSize (9)}"
|
|
DEFVAL { 1492 }
|
|
::= { isisSysLevelEntry 2 }
|
|
|
|
isisSysLevelMinLSPGenInt OBJECT-TYPE
|
|
SYNTAX IsisUnsigned16TC (1..65535)
|
|
UNITS "seconds"
|
|
|
|
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum interval, in seconds, between successive
|
|
generation of LSPs with the same LSPID at this level
|
|
by this Intermediate System."
|
|
REFERENCE "{ISIS.aoi minimumLSPGenerationInterval (11)}"
|
|
DEFVAL { 30 }
|
|
::= { isisSysLevelEntry 3 }
|
|
|
|
isisSysLevelState OBJECT-TYPE
|
|
SYNTAX IsisLevelState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the database at this level.
|
|
The value 'off' indicates that IS-IS is not active at
|
|
this level.
|
|
The value 'on' indicates that IS-IS is active at this
|
|
level and is not overloaded.
|
|
The value 'waiting' indicates a database that is low on
|
|
an essential resource, such as memory.
|
|
The administrator may force the state to 'overloaded'
|
|
by setting the object isisSysLevelSetOverload.
|
|
If the state is 'waiting' or 'overloaded', we
|
|
originate LSPs with the overload bit set."
|
|
REFERENCE "{ISIS.aoi l1State (17)}"
|
|
::= { isisSysLevelEntry 4 }
|
|
|
|
isisSysLevelSetOverload OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Administratively set the overload bit for the level.
|
|
The overload bit MUST continue to be set if the
|
|
implementation runs out of memory, independent of
|
|
this variable. It may also be set manually independent
|
|
of this variable, using the isisSysLevelSetOverloadUntil
|
|
object."
|
|
DEFVAL { false }
|
|
::= { isisSysLevelEntry 5 }
|
|
|
|
isisSysLevelSetOverloadUntil OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
UNITS "Seconds until clearing manually set Overload Bit"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
|
|
|
|
|
|
DESCRIPTION
|
|
"If this object is non-zero, the overload bit is set at
|
|
this level when the isisSysAdminState variable goes to
|
|
state 'on' for this Intermediate System. The overload bit
|
|
remains set for isisSysLevelSetOverloadUntil seconds.
|
|
When isisSysLevelSetOverloadUntil seconds have elapsed,
|
|
the overload flag remains set if the implementation has
|
|
run out of memory, or if it is set manually using the
|
|
isisSysLevelSetOverload object.
|
|
|
|
If isisSysLevelSetOverload is false, the system clears
|
|
the overload bit when isisSysLevelSetOverloadUntil seconds
|
|
have elapsed, if the system has not run out of memory."
|
|
::= { isisSysLevelEntry 6 }
|
|
|
|
isisSysLevelMetricStyle OBJECT-TYPE
|
|
SYNTAX IsisMetricStyle
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Which style of metric do we generate in our LSPs
|
|
at this level?"
|
|
DEFVAL { narrow }
|
|
::= { isisSysLevelEntry 7 }
|
|
|
|
isisSysLevelSPFConsiders OBJECT-TYPE
|
|
SYNTAX IsisMetricStyle
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Which style of metric do we consider in our
|
|
SPF computation at this level?"
|
|
DEFVAL { narrow }
|
|
::= { isisSysLevelEntry 8 }
|
|
|
|
isisSysLevelTEEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Do we do Traffic Engineering at this level?"
|
|
DEFVAL { false }
|
|
::= { isisSysLevelEntry 9 }
|
|
|
|
-- Static to provide next CircIndex
|
|
|
|
isisNextCircIndex OBJECT-TYPE
|
|
SYNTAX IndexIntegerNextFree
|
|
|
|
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to assist a management
|
|
application in creating new rows in the
|
|
isisCircTable. If it is possible to create
|
|
a new instance of isisCircEntry, then this
|
|
object will contain a non-zero value that
|
|
is not in use as the index of any row in the
|
|
isisCircTable. The network manager reads the
|
|
value of this object and then (if the
|
|
value read is non-zero) attempts to create
|
|
the corresponding instance of isisCircEntry.
|
|
If the set request fails with the code
|
|
'inconsistentValue', then the process must be
|
|
repeated; if the set request succeeds, then
|
|
the agent will change the value of this object
|
|
according to an implementation-specific
|
|
algorithm."
|
|
::= { isisCirc 1 }
|
|
|
|
-- The Circuit Table
|
|
-- Each broadcast or point-to-point interface on the system
|
|
-- corresponds to one entry in the Circuit table. However, there
|
|
-- may be multiple X.25 DA circuit entries in the Circuit table
|
|
-- for a given X.25 interface.
|
|
|
|
isisCircTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsisCircEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of circuits used by this
|
|
Intermediate System."
|
|
::= { isisCirc 2 }
|
|
|
|
isisCircEntry OBJECT-TYPE
|
|
SYNTAX IsisCircEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An isisCircEntry exists for each circuit configured
|
|
for Integrated IS-IS on this system.
|
|
|
|
Dynamically created rows MUST survive an agent reboot."
|
|
INDEX { isisCircIndex }
|
|
::= { isisCircTable 1 }
|
|
|
|
|
|
|
|
|
|
IsisCircEntry ::=
|
|
SEQUENCE {
|
|
isisCircIndex
|
|
IndexInteger,
|
|
isisCircIfIndex
|
|
InterfaceIndex,
|
|
isisCircAdminState
|
|
IsisAdminState,
|
|
isisCircExistState
|
|
RowStatus,
|
|
isisCircType
|
|
INTEGER,
|
|
isisCircExtDomain
|
|
TruthValue,
|
|
isisCircLevelType
|
|
IsisLevel,
|
|
isisCircPassiveCircuit
|
|
TruthValue,
|
|
isisCircMeshGroupEnabled
|
|
INTEGER,
|
|
isisCircMeshGroup
|
|
Unsigned32,
|
|
isisCircSmallHellos
|
|
TruthValue,
|
|
isisCircLastUpTime
|
|
TimeStamp,
|
|
isisCirc3WayEnabled
|
|
TruthValue,
|
|
isisCircExtendedCircID
|
|
Unsigned32
|
|
}
|
|
|
|
isisCircIndex OBJECT-TYPE
|
|
SYNTAX IndexInteger
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index used to uniquely identify this circuit.
|
|
When creating a row in this table, the
|
|
isisNextCircIndex object should be retrieved,
|
|
and its value should be specified as the value
|
|
of this index using a SET operation. A retrieved
|
|
value of zero(0) indicates that no rows can be
|
|
created at this time."
|
|
::= { isisCircEntry 1 }
|
|
|
|
isisCircIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
|
|
|
|
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex for the interface to which this
|
|
circuit corresponds. This object cannot be modified
|
|
after creation."
|
|
::= { isisCircEntry 2 }
|
|
|
|
isisCircAdminState OBJECT-TYPE
|
|
SYNTAX IsisAdminState
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative state of the circuit."
|
|
DEFVAL { off }
|
|
::= { isisCircEntry 3 }
|
|
|
|
isisCircExistState OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The existence state of this circuit. Setting the state
|
|
to 'notInService' halts the generation and processing of
|
|
IS-IS protocol PDUs on this circuit. Setting the state
|
|
to destroy will also erase any configuration associated
|
|
with the circuit. Support for 'createAndWait' and
|
|
'notInService' is not required.
|
|
|
|
A row entry cannot be modified when the value of this
|
|
object is 'active'."
|
|
::= { isisCircEntry 4 }
|
|
|
|
isisCircType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
broadcast(1),
|
|
ptToPt(2),
|
|
staticIn(3),
|
|
staticOut(4),
|
|
dA(5)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the circuit. This object follows the
|
|
ReplaceOnlyWhileDisabled behavior. The type specified
|
|
must be compatible with the type of the interface defined
|
|
|
|
|
|
|
|
by the value of isisCircIfIndex."
|
|
REFERENCE "{ISIS.aoi type (33)}"
|
|
::= { isisCircEntry 5 }
|
|
|
|
isisCircExtDomain OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If true, suppress normal transmission of and
|
|
interpretation of Intra-domain IS-IS PDUs on this
|
|
circuit."
|
|
REFERENCE "{ISIS.aoi externalDomain (46)}"
|
|
DEFVAL { false }
|
|
::= { isisCircEntry 6 }
|
|
|
|
isisCircLevelType OBJECT-TYPE
|
|
SYNTAX IsisLevel
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates which type of packets will be sent and
|
|
accepted on this circuit. The values set will be
|
|
saved, but the values used will be modified by
|
|
the settings of isisSysLevelType. Thus, if the
|
|
isisSysTpe is level2 and the isisCircLevelType
|
|
for a circuit is level1, the circuit will not send
|
|
or receive IS-IS packets. This object follows the
|
|
ReplaceOnlyWhileDisabled behavior."
|
|
DEFVAL { level1and2 }
|
|
::= { isisCircEntry 7 }
|
|
|
|
isisCircPassiveCircuit OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Should we include this interface in LSPs, even if
|
|
it is not running the IS-IS Protocol?"
|
|
DEFVAL { false }
|
|
::= { isisCircEntry 8 }
|
|
|
|
isisCircMeshGroupEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
inactive(1),
|
|
blocked(2),
|
|
set(3)
|
|
|
|
|
|
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Is this port a member of a mesh group, or is it
|
|
blocked? Circuits in the same mesh group act as a
|
|
virtual multiaccess network. LSPs seen on one circuit
|
|
in a mesh group will not be flooded to another circuit
|
|
in the same mesh group."
|
|
REFERENCE "{ RFC 2973 }"
|
|
DEFVAL { inactive }
|
|
::= { isisCircEntry 9 }
|
|
|
|
isisCircMeshGroup OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Circuits in the same mesh group act as a virtual
|
|
multiaccess network. LSPs seen on one circuit in
|
|
a mesh group will not be flooded to another circuit
|
|
in the same mesh group. If isisCircMeshGroupEnabled
|
|
is inactive or blocked, this value is ignored."
|
|
REFERENCE "{ RFC 2973 }"
|
|
::= { isisCircEntry 10 }
|
|
|
|
isisCircSmallHellos OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Can we send unpadded hellos on LAN circuits? False
|
|
means the LAN Hellos must be padded.
|
|
Implementations should allow the administrator to read
|
|
this value. An implementation need not be able to
|
|
support unpadded hellos to be conformant."
|
|
DEFVAL { false }
|
|
::= { isisCircEntry 11 }
|
|
|
|
isisCircLastUpTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"How long the circuit has been enabled, measured in
|
|
hundredths of seconds since the last re-initialization
|
|
of the network management subsystem; 0 if the
|
|
circuit has never been 'on'."
|
|
|
|
|
|
|
|
::= { isisCircEntry 12 }
|
|
|
|
isisCirc3WayEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Is this circuit enabled to run 3Way handshake?"
|
|
DEFVAL { true }
|
|
::= { isisCircEntry 13 }
|
|
|
|
isisCircExtendedCircID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value to be used as the extended circuit ID in
|
|
3Way handshake. This value is only used if
|
|
isisCirc3WayEnabled is true, and it must be unique
|
|
across all circuits on this IS."
|
|
::= { isisCircEntry 14 }
|
|
|
|
-- The Circuit Level Table
|
|
-- This table captures level-specific information about a circuit
|
|
|
|
isisCircLevelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsisCircLevelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Level specific information about circuits used by IS-IS."
|
|
::= { isisCircLevelValues 1 }
|
|
|
|
isisCircLevelEntry OBJECT-TYPE
|
|
SYNTAX IsisCircLevelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An isisCircLevelEntry exists for each level on
|
|
each circuit configured for Integrated IS-IS on
|
|
this system.
|
|
|
|
Configured values MUST survive an agent reboot."
|
|
INDEX { isisCircIndex,
|
|
isisCircLevelIndex }
|
|
::= { isisCircLevelTable 1 }
|
|
|
|
IsisCircLevelEntry ::=
|
|
|
|
|
|
|
|
SEQUENCE {
|
|
isisCircLevelIndex
|
|
IsisISLevel,
|
|
isisCircLevelMetric
|
|
IsisDefaultMetric,
|
|
isisCircLevelWideMetric
|
|
IsisWideMetric,
|
|
isisCircLevelISPriority
|
|
IsisISPriority,
|
|
isisCircLevelIDOctet
|
|
Unsigned32,
|
|
isisCircLevelID
|
|
IsisCircuitID,
|
|
isisCircLevelDesIS
|
|
IsisCircuitID,
|
|
isisCircLevelHelloMultiplier
|
|
Unsigned32,
|
|
isisCircLevelHelloTimer
|
|
Unsigned32,
|
|
isisCircLevelDRHelloTimer
|
|
Unsigned32,
|
|
isisCircLevelLSPThrottle
|
|
IsisUnsigned16TC,
|
|
isisCircLevelMinLSPRetransInt
|
|
Unsigned32,
|
|
isisCircLevelCSNPInterval
|
|
Unsigned32,
|
|
isisCircLevelPartSNPInterval
|
|
Unsigned32
|
|
}
|
|
|
|
isisCircLevelIndex OBJECT-TYPE
|
|
SYNTAX IsisISLevel
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The level that this entry describes."
|
|
::= { isisCircLevelEntry 1 }
|
|
|
|
isisCircLevelMetric OBJECT-TYPE
|
|
SYNTAX IsisDefaultMetric
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric value of this circuit for this level."
|
|
REFERENCE "{ISIS.aoi l1DefaultMetric (35)}"
|
|
DEFVAL { 10 }
|
|
::= { isisCircLevelEntry 2 }
|
|
|
|
|
|
|
|
isisCircLevelWideMetric OBJECT-TYPE
|
|
SYNTAX IsisWideMetric
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The wide metric value of this circuit for this level."
|
|
DEFVAL { 10 }
|
|
::= { isisCircLevelEntry 3 }
|
|
|
|
isisCircLevelISPriority OBJECT-TYPE
|
|
SYNTAX IsisISPriority
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority for becoming the LAN-Designated
|
|
Intermediate System at this level."
|
|
REFERENCE "{ISIS.aoi l2IntermediateSystemPriority (73)}"
|
|
DEFVAL { 64 }
|
|
::= { isisCircLevelEntry 4 }
|
|
|
|
isisCircLevelIDOctet OBJECT-TYPE
|
|
SYNTAX Unsigned32(0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A one-byte identifier for the circuit selected by the
|
|
Intermediate System.
|
|
|
|
On point-to-point circuits, the value is used as the Local
|
|
Circuit ID in point-to-point IIH PDUs transmitted on this
|
|
circuit. In this case, values of isisCircLevelIDOctet do
|
|
not need to be unique.
|
|
|
|
For broadcast circuits, the value is used to generate the
|
|
LAN ID that will be used if this Intermediate System is
|
|
elected as the Designated IS on this circuit. The value
|
|
is required to differ on LANs where the Intermediate System
|
|
is the Designated Intermediate System."
|
|
::= { isisCircLevelEntry 5 }
|
|
|
|
isisCircLevelID OBJECT-TYPE
|
|
SYNTAX IsisCircuitID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"On a point-to-point circuit with a fully initialized
|
|
adjacency to a peer IS, the value of this object is
|
|
the circuit ID negotiated during adjacency initialization.
|
|
|
|
|
|
|
|
On a point to point circuit without such an adjacency,
|
|
the value is the concatenation of the local system ID
|
|
and the one-byte isisCircLevelIDOctet for this circuit,
|
|
i.e., the value that would be proposed for the circuit ID.
|
|
On other circuit types, the value returned is the zero-
|
|
length OCTET STRING."
|
|
REFERENCE "{ISIS.aoi ptPtCircuitID (51)}"
|
|
::= { isisCircLevelEntry 6 }
|
|
|
|
isisCircLevelDesIS OBJECT-TYPE
|
|
SYNTAX IsisCircuitID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ID of the LAN-Designated Intermediate System
|
|
on this circuit at this level. If, for any reason,
|
|
this system is not partaking in the relevant
|
|
Designated Intermediate System election process,
|
|
then the value returned is the zero-length OCTET STRING."
|
|
REFERENCE "{ISIS.aoi l2DesignatedIntermediateSystem (75)}"
|
|
::= { isisCircLevelEntry 7 }
|
|
|
|
isisCircLevelHelloMultiplier OBJECT-TYPE
|
|
SYNTAX Unsigned32 (2..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This value is multiplied by the corresponding HelloTimer,
|
|
and the result in seconds (rounded up) is used as the
|
|
holding time in transmitted hellos, to be used by
|
|
receivers of hello packets from this IS."
|
|
REFERENCE "{ISIS.aoi iSISHelloTimer (45)}"
|
|
DEFVAL { 10 }
|
|
::= { isisCircLevelEntry 8 }
|
|
|
|
isisCircLevelHelloTimer OBJECT-TYPE
|
|
SYNTAX Unsigned32 (10..600000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Maximum period, in milliseconds, between IIH PDUs
|
|
on multiaccess networks at this level for LANs.
|
|
The value at L1 is used as the period between
|
|
Hellos on L1L2 point-to-point circuits. Setting
|
|
this value at level 2 on an L1L2 point-to-point
|
|
circuit will result in an error of InconsistentValue.
|
|
|
|
|
|
|
|
|
|
This object follows the ResettingTimer behavior."
|
|
REFERENCE "{ISIS.aoi iSISHelloTimer (45)}"
|
|
DEFVAL { 3000 }
|
|
::= { isisCircLevelEntry 9 }
|
|
|
|
isisCircLevelDRHelloTimer OBJECT-TYPE
|
|
SYNTAX Unsigned32 (10..120000)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Period, in milliseconds, between Hello PDUs on
|
|
multiaccess networks when this IS is the Designated
|
|
Intermediate System. This object follows the
|
|
ResettingTimer behavior."
|
|
REFERENCE "{ISIS.aoi iSISHelloTimer (45)}"
|
|
DEFVAL { 1000 }
|
|
::= { isisCircLevelEntry 10 }
|
|
|
|
isisCircLevelLSPThrottle OBJECT-TYPE
|
|
SYNTAX IsisUnsigned16TC (1..65535)
|
|
UNITS "milliseconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimal interval of time, in milliseconds, between
|
|
transmissions of LSPs on an interface at this level."
|
|
REFERENCE
|
|
"{ISIS.aoi minimumBroadcastLSPTransmissionInterval (5)}"
|
|
DEFVAL { 30 }
|
|
::= { isisCircLevelEntry 11 }
|
|
|
|
isisCircLevelMinLSPRetransInt OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..300)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum interval, in seconds, between re-transmission of
|
|
an LSP at this level. This object follows the
|
|
ResettingTimer behavior.
|
|
|
|
Note that isisCircLevelLSPThrottle controls
|
|
how fast we send back-to-back LSPs. This variable
|
|
controls how fast we re-send the same LSP."
|
|
REFERENCE "{ISIS.aoi minimumLSPTransmissionInterval (5)}"
|
|
DEFVAL { 5 }
|
|
::= { isisCircLevelEntry 12 }
|
|
|
|
|
|
|
|
isisCircLevelCSNPInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..600)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval of time, in seconds, between periodic
|
|
transmission of a complete set of CSNPs on
|
|
multiaccess networks if this router is the
|
|
designated router at this level.
|
|
This object follows the ResettingTimer behavior."
|
|
REFERENCE "{ISIS.aoi completeSNPInterval (8)}"
|
|
DEFVAL { 10 }
|
|
::= { isisCircLevelEntry 13 }
|
|
|
|
isisCircLevelPartSNPInterval OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..120)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Minimum interval, in seconds, between sending Partial
|
|
Sequence Number PDUs at this level. This object
|
|
follows the ResettingTimer behavior."
|
|
REFERENCE "{ISIS.aoi partialSNPInterval (14)}"
|
|
DEFVAL { 2 }
|
|
::= { isisCircLevelEntry 14 }
|
|
|
|
-- isisSystemCounterTable keeps track of system-wide events.
|
|
|
|
isisSystemCounterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsisSystemCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System-wide counters for this Intermediate System."
|
|
::= { isisCounters 1 }
|
|
|
|
isisSystemCounterEntry OBJECT-TYPE
|
|
SYNTAX IsisSystemCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"System-wide IS-IS counters."
|
|
INDEX { isisSysStatLevel }
|
|
::= { isisSystemCounterTable 1 }
|
|
|
|
IsisSystemCounterEntry ::=
|
|
|
|
|
|
|
|
SEQUENCE {
|
|
isisSysStatLevel
|
|
IsisISLevel,
|
|
isisSysStatCorrLSPs
|
|
Counter32,
|
|
isisSysStatAuthTypeFails
|
|
Counter32,
|
|
isisSysStatAuthFails
|
|
Counter32,
|
|
isisSysStatLSPDbaseOloads
|
|
Counter32,
|
|
isisSysStatManAddrDropFromAreas
|
|
Counter32,
|
|
isisSysStatAttmptToExMaxSeqNums
|
|
Counter32,
|
|
isisSysStatSeqNumSkips
|
|
Counter32,
|
|
isisSysStatOwnLSPPurges
|
|
Counter32,
|
|
isisSysStatIDFieldLenMismatches
|
|
Counter32,
|
|
isisSysStatPartChanges
|
|
Counter32,
|
|
isisSysStatSPFRuns
|
|
Counter32,
|
|
isisSysStatLSPErrors
|
|
Counter32
|
|
}
|
|
|
|
isisSysStatLevel OBJECT-TYPE
|
|
SYNTAX IsisISLevel
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The level that this entry describes."
|
|
::= { isisSystemCounterEntry 1 }
|
|
|
|
isisSysStatCorrLSPs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Number of corrupted in-memory frames"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of corrupted in-memory LSPs detected.
|
|
|
|
LSPs received from the wire with a bad checksum
|
|
are silently dropped and are not counted.
|
|
|
|
|
|
|
|
|
|
LSPs received from the wire with parse errors
|
|
are counted by isisSysStatLSPErrors."
|
|
REFERENCE "{ISIS.aoi corruptedLSPsDetected (19)}"
|
|
::= { isisSystemCounterEntry 2 }
|
|
|
|
isisSysStatAuthTypeFails OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Number of frames with authentication type mismatches"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of authentication type mismatches recognized
|
|
by this Intermediate System."
|
|
::= { isisSystemCounterEntry 3 }
|
|
|
|
isisSysStatAuthFails OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Number of frames with authentication key failures"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of authentication key failures recognized
|
|
by this Intermediate System."
|
|
::= { isisSystemCounterEntry 4 }
|
|
|
|
isisSysStatLSPDbaseOloads OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the LSP database has become
|
|
overloaded."
|
|
REFERENCE "{ISIS.aoi lSPL1DatabaseOverloads (20)}"
|
|
::= { isisSystemCounterEntry 5 }
|
|
|
|
isisSysStatManAddrDropFromAreas OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times a manual address has been dropped from
|
|
the area."
|
|
REFERENCE "{ISIS.aoi manualAddressesDroppedFromArea (21)}"
|
|
::= { isisSystemCounterEntry 6 }
|
|
|
|
isisSysStatAttmptToExMaxSeqNums OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
|
|
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times the IS has attempted to exceed the
|
|
maximum sequence number."
|
|
REFERENCE
|
|
"{ISIS.aoi attemptsToExceedmaximumSequenceNumber (22)}"
|
|
::= { isisSystemCounterEntry 7 }
|
|
|
|
isisSysStatSeqNumSkips OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times a sequence number skip has occurred."
|
|
REFERENCE "{ISIS.aoi sequenceNumberSkips (23)}"
|
|
::= { isisSystemCounterEntry 8 }
|
|
|
|
isisSysStatOwnLSPPurges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times a zero-aged copy of the system's own LSP
|
|
is received from some other node."
|
|
REFERENCE "{ISIS.aoi ownLSPPurges (24)}"
|
|
::= { isisSystemCounterEntry 9 }
|
|
|
|
isisSysStatIDFieldLenMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Number of frames with ID length mismatches"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times a PDU is received with a different value
|
|
for ID field length from that of the receiving system."
|
|
REFERENCE "{ISIS.aoi iDFieldLengthMismatches (25)}"
|
|
::= { isisSystemCounterEntry 10 }
|
|
|
|
isisSysStatPartChanges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Partition changes."
|
|
::= { isisSystemCounterEntry 11 }
|
|
|
|
isisSysStatSPFRuns OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
|
|
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times we ran SPF at this level."
|
|
::= { isisSystemCounterEntry 12 }
|
|
|
|
isisSysStatLSPErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Number of frames with errors that we have received"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of LSPs with errors we have received."
|
|
::= { isisSystemCounterEntry 13 }
|
|
|
|
-- isisCircuitCounterTable keeps track of events
|
|
-- specific to a circuit and a level
|
|
|
|
isisCircuitCounterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsisCircuitCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Circuit specific counters for this
|
|
Intermediate System."
|
|
::= { isisCounters 2 }
|
|
|
|
isisCircuitCounterEntry OBJECT-TYPE
|
|
SYNTAX IsisCircuitCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An isisCircuitCounterEntry exists for each circuit
|
|
used by Integrated IS-IS on this system."
|
|
INDEX { isisCircIndex,
|
|
isisCircuitType }
|
|
::= { isisCircuitCounterTable 1 }
|
|
|
|
IsisCircuitCounterEntry ::= SEQUENCE {
|
|
isisCircuitType
|
|
INTEGER,
|
|
isisCircAdjChanges
|
|
Counter32,
|
|
isisCircNumAdj
|
|
Unsigned32,
|
|
isisCircInitFails
|
|
Counter32,
|
|
isisCircRejAdjs
|
|
|
|
|
|
|
|
Counter32,
|
|
isisCircIDFieldLenMismatches
|
|
Counter32,
|
|
isisCircMaxAreaAddrMismatches
|
|
Counter32,
|
|
isisCircAuthTypeFails
|
|
Counter32,
|
|
isisCircAuthFails
|
|
Counter32,
|
|
isisCircLANDesISChanges
|
|
Counter32
|
|
}
|
|
|
|
isisCircuitType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
lanlevel1(1),
|
|
lanlevel2(2),
|
|
p2pcircuit(3)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"What type of circuit saw these counts?
|
|
|
|
The point-to-point Hello PDU includes
|
|
both L1 and L2, and ISs form a single
|
|
adjacency on point-to-point links.
|
|
Thus, we combine counts on
|
|
point-to-point links into one group."
|
|
::= { isisCircuitCounterEntry 1 }
|
|
|
|
isisCircAdjChanges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times an adjacency state change has
|
|
occurred on this circuit."
|
|
REFERENCE "{ISIS.aoi changesInAdjacencyState (40)}"
|
|
::= { isisCircuitCounterEntry 2 }
|
|
|
|
isisCircNumAdj OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of adjacencies on this circuit."
|
|
|
|
|
|
|
|
REFERENCE "{ISIS.aoi changesInAdjacencyState (40)}"
|
|
::= { isisCircuitCounterEntry 3 }
|
|
|
|
isisCircInitFails OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times initialization of this circuit has
|
|
failed. This counts events such as PPP NCP failures.
|
|
Failures to form an adjacency are counted by
|
|
isisCircRejAdjs."
|
|
::= { isisCircuitCounterEntry 4 }
|
|
|
|
isisCircRejAdjs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times an adjacency has been rejected on
|
|
this circuit."
|
|
REFERENCE "{ISIS.aoi rejectedAdjacencies (42)}"
|
|
::= { isisCircuitCounterEntry 5 }
|
|
|
|
isisCircIDFieldLenMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Number of frames with ID field length mismatch"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times an IS-IS control PDU with an ID
|
|
field length different from that for this system has been
|
|
received."
|
|
REFERENCE "{ISIS.aoi iDFieldLengthMismatches (25)}"
|
|
::= { isisCircuitCounterEntry 6 }
|
|
|
|
isisCircMaxAreaAddrMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times an IS-IS control PDU with a
|
|
max area address field different from that for this
|
|
system has been received."
|
|
REFERENCE "{ISIS.aoi iDFieldLengthMismatches (25)}"
|
|
::= { isisCircuitCounterEntry 7 }
|
|
|
|
isisCircAuthTypeFails OBJECT-TYPE
|
|
|
|
|
|
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times an IS-IS control PDU with
|
|
an auth type field different from that for this
|
|
system has been received."
|
|
::= { isisCircuitCounterEntry 8 }
|
|
|
|
isisCircAuthFails OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times an IS-IS control PDU with
|
|
the correct auth type has failed to pass authentication
|
|
validation."
|
|
::= { isisCircuitCounterEntry 9 }
|
|
|
|
isisCircLANDesISChanges OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the Designated IS has changed
|
|
on this circuit at this level. If the circuit is
|
|
point to point, this count is zero."
|
|
::= { isisCircuitCounterEntry 10 }
|
|
|
|
-- isisPacketCounterTable keeps track of the number of IS-IS
|
|
-- control packets sent and received at each level
|
|
|
|
isisPacketCounterTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsisPacketCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about IS-IS protocol traffic at one level,
|
|
on one circuit, in one direction."
|
|
::= { isisCounters 3 }
|
|
|
|
isisPacketCounterEntry OBJECT-TYPE
|
|
SYNTAX IsisPacketCounterEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about IS-IS protocol traffic at one level,
|
|
on one circuit, in one direction."
|
|
|
|
|
|
|
|
INDEX { isisCircIndex,
|
|
isisPacketCountLevel,
|
|
isisPacketCountDirection }
|
|
::= { isisPacketCounterTable 1 }
|
|
|
|
IsisPacketCounterEntry ::=
|
|
SEQUENCE {
|
|
isisPacketCountLevel
|
|
IsisISLevel,
|
|
isisPacketCountDirection
|
|
INTEGER,
|
|
isisPacketCountIIHello
|
|
Counter32,
|
|
isisPacketCountISHello
|
|
Counter32,
|
|
isisPacketCountESHello
|
|
Counter32,
|
|
isisPacketCountLSP
|
|
Counter32,
|
|
isisPacketCountCSNP
|
|
Counter32,
|
|
isisPacketCountPSNP
|
|
Counter32,
|
|
isisPacketCountUnknown
|
|
Counter32
|
|
}
|
|
|
|
isisPacketCountLevel OBJECT-TYPE
|
|
SYNTAX IsisISLevel
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The level at which these PDU counts have been collected."
|
|
::= { isisPacketCounterEntry 1 }
|
|
|
|
isisPacketCountDirection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
sending(1),
|
|
receiving(2)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Were we sending or receiving these PDUs?"
|
|
::= { isisPacketCounterEntry 2 }
|
|
|
|
isisPacketCountIIHello OBJECT-TYPE
|
|
|
|
|
|
|
|
SYNTAX Counter32
|
|
UNITS "Number of IS-IS Hellos frames seen in this direction
|
|
at this level"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IS-IS Hello PDUs seen in this
|
|
direction at this level.
|
|
|
|
Point-to-Point IIH PDUs are counted at
|
|
the lowest enabled level: at L1 on L1 or L1L2 circuits,
|
|
and at L2 otherwise."
|
|
REFERENCE "{ISIS.aoi iSISControlPDUsSent (43)}"
|
|
::= { isisPacketCounterEntry 3 }
|
|
|
|
isisPacketCountISHello OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Number of ES-IS frames seen in this direction at
|
|
this level."
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ES-IS Hello PDUs seen in this
|
|
direction. ISH PDUs are counted at the
|
|
lowest enabled level: at L1 on L1 or L1L2
|
|
circuits, and at L2 otherwise."
|
|
::= { isisPacketCounterEntry 4 }
|
|
|
|
isisPacketCountESHello OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Number of ES Hello frames seen in this direction at
|
|
this level"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of ES Hello PDUs seen in this
|
|
direction. ESH PDUs are counted at the
|
|
lowest enabled level: at L1 on L1 or L1L2
|
|
circuits, and at L2 otherwise."
|
|
::= { isisPacketCounterEntry 5 }
|
|
|
|
isisPacketCountLSP OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Number of IS-IS LSP frames seen in this direction at
|
|
this level"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
|
|
|
|
"The number of IS-IS LSPs seen in this
|
|
direction at this level."
|
|
REFERENCE "{ISIS.aoi iSISControlPDUsSent (43)}"
|
|
::= { isisPacketCounterEntry 6 }
|
|
|
|
isisPacketCountCSNP OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Number of IS-IS CSNP frames seen in this direction at
|
|
this level"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IS-IS CSNPs seen in this
|
|
direction at this level."
|
|
REFERENCE "{ISIS.aoi iSISControlPDUsSent (43)}"
|
|
::= { isisPacketCounterEntry 7 }
|
|
|
|
isisPacketCountPSNP OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Number of IS-IS PSNP frames seen in this direction at
|
|
this level"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of IS-IS PSNPs seen in this
|
|
direction at this level."
|
|
REFERENCE "{ISIS.aoi iSISControlPDUsSent (43)}"
|
|
::= { isisPacketCounterEntry 8 }
|
|
|
|
isisPacketCountUnknown OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Number of unknown IS-IS frames seen at this level"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of unknown IS-IS PDUs seen
|
|
at this level."
|
|
REFERENCE "{ISIS.aoi iSISControlPDUsSent (43)}"
|
|
::= { isisPacketCounterEntry 9 }
|
|
|
|
-- The IS Adjacency Table
|
|
--
|
|
-- Each adjacency to an IS corresponds to one entry in this
|
|
-- table.
|
|
|
|
isisISAdjTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsisISAdjEntry
|
|
MAX-ACCESS not-accessible
|
|
|
|
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of adjacencies to Intermediate Systems."
|
|
::= { isisISAdj 1 }
|
|
|
|
isisISAdjEntry OBJECT-TYPE
|
|
SYNTAX IsisISAdjEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry corresponds to one adjacency to an
|
|
Intermediate System on this system.
|
|
|
|
Dynamically learned rows do not survive an agent reboot."
|
|
INDEX { isisCircIndex,
|
|
isisISAdjIndex }
|
|
::= { isisISAdjTable 1 }
|
|
|
|
IsisISAdjEntry ::=
|
|
SEQUENCE {
|
|
isisISAdjIndex
|
|
Unsigned32,
|
|
isisISAdjState
|
|
INTEGER,
|
|
isisISAdj3WayState
|
|
INTEGER,
|
|
isisISAdjNeighSNPAAddress
|
|
IsisOSINSAddress,
|
|
isisISAdjNeighSysType
|
|
INTEGER,
|
|
isisISAdjNeighSysID
|
|
IsisSystemID,
|
|
isisISAdjNbrExtendedCircID
|
|
Unsigned32,
|
|
isisISAdjUsage
|
|
IsisLevel,
|
|
isisISAdjHoldTimer
|
|
IsisUnsigned16TC,
|
|
isisISAdjNeighPriority
|
|
IsisISPriority,
|
|
isisISAdjLastUpTime
|
|
TimeStamp
|
|
}
|
|
|
|
isisISAdjIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
|
|
|
|
|
|
DESCRIPTION
|
|
"A unique value identifying the IS adjacency from all
|
|
other such adjacencies on this circuit. This value is
|
|
automatically assigned by the system when the adjacency
|
|
is created."
|
|
::= { isisISAdjEntry 1 }
|
|
|
|
isisISAdjState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
down (1),
|
|
initializing (2),
|
|
up (3),
|
|
failed(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of the adjacency."
|
|
REFERENCE "{ISIS.aoi adjacencyState (78)}"
|
|
::= { isisISAdjEntry 2 }
|
|
|
|
isisISAdj3WayState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
up (0),
|
|
initializing (1),
|
|
down (2),
|
|
failed (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 3Way state of the adjacency. These are picked
|
|
to match the historical on-the-wire representation
|
|
of the 3Way state and are not intended to match
|
|
isisISAdjState."
|
|
REFERENCE "{ RFC 3373 }"
|
|
::= { isisISAdjEntry 3 }
|
|
|
|
isisISAdjNeighSNPAAddress OBJECT-TYPE
|
|
SYNTAX IsisOSINSAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNPA address of the neighboring system."
|
|
REFERENCE "{ISIS.aoi neighbourSNPAAddress (79)}"
|
|
::= { isisISAdjEntry 4 }
|
|
|
|
|
|
|
|
isisISAdjNeighSysType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
l1IntermediateSystem(1),
|
|
l2IntermediateSystem(2),
|
|
l1L2IntermediateSystem(3),
|
|
unknown(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the neighboring system."
|
|
REFERENCE "{ISIS.aoi neighbourSystemType (80)}"
|
|
::= { isisISAdjEntry 5 }
|
|
|
|
isisISAdjNeighSysID OBJECT-TYPE
|
|
SYNTAX IsisSystemID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system ID of the neighboring Intermediate
|
|
System."
|
|
REFERENCE "{ISIS.aoi neighbourSystemIds (83)}"
|
|
::= { isisISAdjEntry 6 }
|
|
|
|
isisISAdjNbrExtendedCircID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 4-byte Extended Circuit ID learned from the
|
|
Neighbor during 3-way handshake, or 0."
|
|
::= { isisISAdjEntry 7 }
|
|
|
|
isisISAdjUsage OBJECT-TYPE
|
|
SYNTAX IsisLevel
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"How is the adjacency used? On a point-to-point link,
|
|
this might be level1and2, but on a LAN, the usage will
|
|
be level1 on the adjacency between peers at L1,
|
|
and level2 for the adjacency between peers at L2."
|
|
REFERENCE "{ISIS.aoi adjacencyUsage (82)}"
|
|
::= { isisISAdjEntry 8 }
|
|
|
|
isisISAdjHoldTimer OBJECT-TYPE
|
|
SYNTAX IsisUnsigned16TC (1..65535)
|
|
|
|
|
|
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The holding time, in seconds, for this adjacency.
|
|
This value is based on received IIH PDUs and
|
|
the elapsed time since receipt."
|
|
REFERENCE "{ISIS.aoi holdingTimer (85)}"
|
|
::= { isisISAdjEntry 9 }
|
|
|
|
isisISAdjNeighPriority OBJECT-TYPE
|
|
SYNTAX IsisISPriority
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Priority of the neighboring Intermediate System for
|
|
becoming the Designated Intermediate System."
|
|
REFERENCE "{ISIS.aoi lANPriority (86)}"
|
|
::= { isisISAdjEntry 10 }
|
|
|
|
isisISAdjLastUpTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the adjacency most recently entered the state 'up',
|
|
measured in hundredths of a second since the last
|
|
re-initialization of the network management subsystem.
|
|
Holds 0 if the adjacency has never been in state 'up'."
|
|
::= { isisISAdjEntry 11 }
|
|
|
|
-- The IS Adjacency Area Address Table
|
|
|
|
-- The IS Adjacency Area Address Table contains the set of
|
|
-- Area Addresses of neighboring
|
|
-- Intermediate Systems as reported in IIH PDUs.
|
|
|
|
isisISAdjAreaAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsisISAdjAreaAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the set of Area Addresses of
|
|
neighboring Intermediate Systems as reported in received
|
|
IIH PDUs."
|
|
REFERENCE "{ISIS.aoi areaAddressesOfNeighbour (84)}"
|
|
::= { isisISAdj 2 }
|
|
|
|
|
|
|
|
|
|
isisISAdjAreaAddrEntry OBJECT-TYPE
|
|
SYNTAX IsisISAdjAreaAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one Area Address reported by a
|
|
neighboring Intermediate System in its IIH PDUs.
|
|
|
|
Dynamically learned rows do not survive an agent reboot."
|
|
INDEX { isisCircIndex,
|
|
isisISAdjIndex,
|
|
isisISAdjAreaAddrIndex }
|
|
::= { isisISAdjAreaAddrTable 1 }
|
|
|
|
IsisISAdjAreaAddrEntry ::=
|
|
SEQUENCE {
|
|
isisISAdjAreaAddrIndex
|
|
Unsigned32,
|
|
isisISAdjAreaAddress
|
|
IsisOSINSAddress
|
|
}
|
|
|
|
isisISAdjAreaAddrIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index for the areas associated with one neighbor.
|
|
This provides a simple way to walk the table."
|
|
::= { isisISAdjAreaAddrEntry 1 }
|
|
|
|
isisISAdjAreaAddress OBJECT-TYPE
|
|
SYNTAX IsisOSINSAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"One Area Address as reported in IIH PDUs received from
|
|
the neighbor."
|
|
::= { isisISAdjAreaAddrEntry 2 }
|
|
|
|
-- The IS Adjacency IP Address Table
|
|
|
|
-- The IS Adjacency IP Address Table contains the
|
|
-- set of IP Addresses of neighboring Intermediate Systems
|
|
-- as reported in received IIH PDUs.
|
|
|
|
isisISAdjIPAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsisISAdjIPAddrEntry
|
|
|
|
|
|
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the set of IP Addresses of
|
|
neighboring Intermediate Systems as reported in received
|
|
IIH PDUs."
|
|
::= { isisISAdj 3 }
|
|
|
|
isisISAdjIPAddrEntry OBJECT-TYPE
|
|
SYNTAX IsisISAdjIPAddrEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one IP Address reported by a
|
|
neighboring Intermediate System in its IIH PDUs.
|
|
|
|
Dynamically learned rows do not survive an agent reboot."
|
|
INDEX { isisCircIndex,
|
|
isisISAdjIndex,
|
|
isisISAdjIPAddrIndex
|
|
}
|
|
::= { isisISAdjIPAddrTable 1 }
|
|
|
|
IsisISAdjIPAddrEntry ::=
|
|
SEQUENCE {
|
|
isisISAdjIPAddrIndex
|
|
Unsigned32,
|
|
isisISAdjIPAddrType
|
|
InetAddressType,
|
|
isisISAdjIPAddrAddress
|
|
InetAddress
|
|
}
|
|
|
|
isisISAdjIPAddrIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index to this table that identifies the IP addresses
|
|
to which this entry belongs."
|
|
::= { isisISAdjIPAddrEntry 1 }
|
|
|
|
isisISAdjIPAddrType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of one IP Address as reported in IIH PDUs
|
|
|
|
|
|
|
|
received from the neighbor."
|
|
::= { isisISAdjIPAddrEntry 2 }
|
|
|
|
isisISAdjIPAddrAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"One IP Address as reported in IIH PDUs received from the
|
|
neighbor.
|
|
|
|
The type of this address is determined by the value of
|
|
the isisISAdjIPAddrType object."
|
|
::= { isisISAdjIPAddrEntry 3 }
|
|
|
|
-- The IS Adjacency Protocol Supported Table
|
|
--
|
|
-- The IS Adjacency Protocol Supported Table contains the set of
|
|
-- protocols supported by neighboring
|
|
-- Intermediate Systems as reported in received IIH PDUs.
|
|
|
|
isisISAdjProtSuppTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsisISAdjProtSuppEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains the set of protocols supported by
|
|
neighboring Intermediate Systems as reported in received
|
|
IIH PDUs."
|
|
::= { isisISAdj 4 }
|
|
|
|
isisISAdjProtSuppEntry OBJECT-TYPE
|
|
SYNTAX IsisISAdjProtSuppEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry contains one protocol supported by a
|
|
neighboring Intermediate System as reported in its IIH
|
|
PDUs.
|
|
|
|
Dynamically learned rows do not survive an agent reboot."
|
|
INDEX { isisCircIndex,
|
|
isisISAdjIndex,
|
|
isisISAdjProtSuppProtocol }
|
|
::= { isisISAdjProtSuppTable 1 }
|
|
|
|
IsisISAdjProtSuppEntry ::=
|
|
SEQUENCE {
|
|
|
|
|
|
|
|
isisISAdjProtSuppProtocol
|
|
IsisSupportedProtocol
|
|
}
|
|
|
|
isisISAdjProtSuppProtocol OBJECT-TYPE
|
|
SYNTAX IsisSupportedProtocol
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"One supported protocol as reported in IIH PDUs received
|
|
from the neighbor."
|
|
::= { isisISAdjProtSuppEntry 1 }
|
|
|
|
-- The Reachable Address Group
|
|
--
|
|
-- The Reachable Address Table
|
|
-- Each entry records information about a reachable address
|
|
-- (NSAP or address prefix) manually configured on the system
|
|
-- or learned through another protocol.
|
|
|
|
isisRATable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsisRAEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of Reachable Addresses to NSAPs or Address
|
|
Prefixes."
|
|
::= { isisReachAddr 1 }
|
|
|
|
isisRAEntry OBJECT-TYPE
|
|
SYNTAX IsisRAEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry defines a configured Reachable Address
|
|
to an NSAP or Address Prefix.
|
|
|
|
Dynamically created rows MUST survive an agent reboot."
|
|
INDEX { isisCircIndex,
|
|
isisRAIndex }
|
|
::= { isisRATable 1 }
|
|
|
|
IsisRAEntry ::=
|
|
SEQUENCE {
|
|
isisRAIndex
|
|
Unsigned32,
|
|
isisRAExistState
|
|
RowStatus,
|
|
|
|
|
|
|
|
isisRAAdminState
|
|
IsisAdminState,
|
|
isisRAAddrPrefix
|
|
IsisOSINSAddress,
|
|
isisRAMapType
|
|
INTEGER,
|
|
isisRAMetric
|
|
IsisDefaultMetric,
|
|
isisRAMetricType
|
|
IsisMetricType,
|
|
isisRASNPAAddress
|
|
IsisOSINSAddress,
|
|
isisRASNPAMask
|
|
IsisOSINSAddress,
|
|
isisRASNPAPrefix
|
|
IsisOSINSAddress,
|
|
isisRAType
|
|
INTEGER
|
|
}
|
|
|
|
isisRAIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identifier for this isisRAEntry. This value must be
|
|
unique amongst all Reachable Addresses on the same parent
|
|
Circuit."
|
|
::= { isisRAEntry 1 }
|
|
|
|
isisRAExistState OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The existence state of this Reachable Address. This
|
|
object follows the ManualOrAutomatic behaviors. Support
|
|
for 'createAndWait' and 'notInService' is not required.
|
|
|
|
A row entry cannot be modified when the value of this
|
|
object is 'active'."
|
|
::= { isisRAEntry 2 }
|
|
|
|
isisRAAdminState OBJECT-TYPE
|
|
SYNTAX IsisAdminState
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
|
|
|
|
"The administrative state of the Reachable Address. This
|
|
object follows the ManualOrAutomatic behaviors."
|
|
DEFVAL { off }
|
|
::= { isisRAEntry 3 }
|
|
|
|
isisRAAddrPrefix OBJECT-TYPE
|
|
SYNTAX IsisOSINSAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination of this Reachable Address. This is an
|
|
Address Prefix. This object follows the
|
|
ReplaceOnlyWhileDisabled and ManualOrAutomatic
|
|
behaviors."
|
|
REFERENCE "{ISIS.aoi addressPrefix (98)}"
|
|
::= { isisRAEntry 4 }
|
|
|
|
isisRAMapType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none (1),
|
|
explicit (2),
|
|
extractIDI (3),
|
|
extractDSP (4)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of mapping to be employed to ascertain the SNPA
|
|
Address that should be used in forwarding PDUs for this
|
|
Reachable Address prefix. This object follows the
|
|
ManualOrAutomatic behavior. The following values of
|
|
mapping type are defined:
|
|
|
|
none: The mapping is null because the neighbor SNPA is
|
|
implicit by nature of the subnetwork (e.g., a
|
|
point-to-point linkage).
|
|
|
|
explicit: The subnetwork addresses in the object
|
|
isisRASNPAAddress are to be used.
|
|
|
|
extractIDI: The SNPA is embedded in the IDI of
|
|
the destination NSAP Address. The mapping
|
|
algorithm extracts the SNPA to be used
|
|
according to the format and encoding rules of
|
|
ISO8473/Add2. This SNPA extraction algorithm can
|
|
be used in conjunction with Reachable Address
|
|
prefixes from the X.121, F.69, E.163, and E.164
|
|
|
|
|
|
|
|
addressing subdomains.
|
|
|
|
extractDSP: All, or a suffix, of the SNPA is embedded
|
|
in the DSP of the destination address. This SNPA
|
|
extraction algorithm extracts the embedded
|
|
subnetwork addressing information by performing a
|
|
logical AND of the isisRASNPAMask object value
|
|
with the destination address. The part of the
|
|
SNPA extracted from the destination NSAP is
|
|
appended to the isisRASNPAPrefix object value to
|
|
form the next hop subnetwork addressing
|
|
information."
|
|
|
|
REFERENCE "{ISO10589-ISIS.aoi mappingType (107)}"
|
|
::= { isisRAEntry 5 }
|
|
|
|
isisRAMetric OBJECT-TYPE
|
|
SYNTAX IsisDefaultMetric
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric value for reaching the specified
|
|
prefix over this circuit. This object follows the
|
|
ManualOrAutomatic behavior."
|
|
REFERENCE "{ISIS.aoi DefaultMetric (99)}"
|
|
DEFVAL { 20 }
|
|
::= { isisRAEntry 6 }
|
|
|
|
isisRAMetricType OBJECT-TYPE
|
|
SYNTAX IsisMetricType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the metric is internal or
|
|
external. This object follows the ManualOrAutomatic
|
|
behavior."
|
|
REFERENCE "{ISIS.aoi DefaultMetricType (103)}"
|
|
DEFVAL { internal }
|
|
::= { isisRAEntry 7 }
|
|
|
|
isisRASNPAAddress OBJECT-TYPE
|
|
SYNTAX IsisOSINSAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNPA Address to which a PDU may be forwarded in
|
|
order to reach a destination that matches the address
|
|
prefix of the Reachable Address. This object follows the
|
|
|
|
|
|
|
|
ManualOrAutomatic behavior."
|
|
REFERENCE "{ISIS.aoi sNPAAddresses (109)}"
|
|
-- Note only one address may be specified per Reachable Address
|
|
-- in the MIB
|
|
DEFVAL { ''H }
|
|
::= { isisRAEntry 8 }
|
|
|
|
isisRASNPAMask OBJECT-TYPE
|
|
SYNTAX IsisOSINSAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A bit mask with 1 bit indicating the positions in the
|
|
effective destination address from which embedded SNPA
|
|
information is to be extracted. For the extraction, the
|
|
first octet of the isisRASNPAMask object value is aligned
|
|
with the first octet (AFI) of the NSAP Address. If the
|
|
isisRASNPAMask object value and NSAP Address are of
|
|
different lengths, the shorter of the two is logically
|
|
padded with zeros before performing the extraction. This
|
|
object follows the ManualOrAutomatic behavior."
|
|
REFERENCE "{ISIS.aoi sNPAMask (122)}"
|
|
DEFVAL { '00'H }
|
|
::= { isisRAEntry 9 }
|
|
|
|
isisRASNPAPrefix OBJECT-TYPE
|
|
SYNTAX IsisOSINSAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A fixed SNPA prefix for use when the isisRAMapType is
|
|
extractDSP. The SNPA Address to use is formed by
|
|
concatenating the fixed SNPA prefix with a variable SNPA
|
|
part that is extracted from the effective destination
|
|
address. For Reachable Address prefixes in which the
|
|
entire SNPA is embedded in the DSP, the SNPA Prefix shall
|
|
be null. This object follows the ManualOrAutomatic
|
|
behavior."
|
|
REFERENCE "{ISIS.aoi sNPAPrefix (123)}"
|
|
DEFVAL { '00'H }
|
|
::= { isisRAEntry 10 }
|
|
|
|
isisRAType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
manual (1),
|
|
automatic (2)
|
|
}
|
|
|
|
|
|
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of Reachable address. Those of type
|
|
manual are created by the network manager. Those
|
|
of type automatic are created through propagation
|
|
of routing information from another routing
|
|
protocol (e.g., IDRP). "
|
|
DEFVAL {manual}
|
|
::= {isisRAEntry 11 }
|
|
|
|
|
|
-- The IP Reachable Address Table
|
|
|
|
-- Each entry records information about one IP reachable
|
|
-- address manually configured on this system or learned from
|
|
-- another protocol.
|
|
|
|
isisIPRATable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsisIPRAEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of IP Reachable Addresses to networks,
|
|
subnetworks, or hosts either manually configured or
|
|
learned from another protocol."
|
|
::= { isisIPReachAddr 1 }
|
|
|
|
isisIPRAEntry OBJECT-TYPE
|
|
SYNTAX IsisIPRAEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry defines an IP Reachable Address to a network,
|
|
subnetwork, or host.
|
|
|
|
Each IP Reachable Address may have multiple entries in the
|
|
table, one for each equal cost path to the reachable
|
|
address.
|
|
|
|
Dynamically created rows MUST survive an agent reboot.
|
|
|
|
Implementers need to be aware that if the total number
|
|
of elements (octets or sub-identifiers) in
|
|
isisIPRADestr, isisIPRADestPrefixLen, and
|
|
isisIPRANextHopIndex is too great, then OIDs of column
|
|
instances in this table will have more than 128
|
|
subidentifiers and cannot be accessed using SNMPv1,
|
|
|
|
|
|
|
|
SNMPv2c, or SNMPv3."
|
|
INDEX { isisSysLevelIndex,
|
|
isisIPRADestType,
|
|
isisIPRADest,
|
|
isisIPRADestPrefixLen,
|
|
isisIPRANextHopIndex }
|
|
::= { isisIPRATable 1 }
|
|
|
|
IsisIPRAEntry ::=
|
|
SEQUENCE {
|
|
isisIPRADestType
|
|
InetAddressType,
|
|
isisIPRADest
|
|
InetAddress,
|
|
isisIPRADestPrefixLen
|
|
InetAddressPrefixLength,
|
|
isisIPRANextHopIndex
|
|
Unsigned32,
|
|
isisIPRANextHopType
|
|
InetAddressType,
|
|
isisIPRANextHop
|
|
InetAddress,
|
|
isisIPRAType
|
|
INTEGER,
|
|
isisIPRAExistState
|
|
RowStatus,
|
|
isisIPRAAdminState
|
|
IsisAdminState,
|
|
isisIPRAMetric
|
|
IsisDefaultMetric,
|
|
isisIPRAMetricType
|
|
IsisMetricType,
|
|
isisIPRAFullMetric
|
|
IsisFullMetric,
|
|
isisIPRASNPAAddress
|
|
IsisOSINSAddress,
|
|
isisIPRASourceType
|
|
INTEGER
|
|
}
|
|
|
|
isisIPRADestType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of this IP Reachable Address."
|
|
::= { isisIPRAEntry 1 }
|
|
|
|
|
|
|
|
|
|
isisIPRADest OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination of this IP Reachable Address. This is
|
|
a network address, subnetwork address, or host
|
|
address.
|
|
|
|
The type of this address is determined by the value of
|
|
the isisIPRADestType object."
|
|
|
|
::= { isisIPRAEntry 2 }
|
|
|
|
isisIPRADestPrefixLen OBJECT-TYPE
|
|
SYNTAX InetAddressPrefixLength
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of the IP Netmask for Reachability Address.
|
|
|
|
The values for the index objects isisIPRADest and
|
|
isisIPRADestPrefixLen must be consistent. When the value
|
|
of isisIPRADest (excluding the zone index, if one
|
|
is present) is x, then the bitwise logical-AND
|
|
of x with the value of the mask formed from the
|
|
corresponding index object isisIPRADestPrefixLen MUST be
|
|
equal to x. If not, then the index pair is not
|
|
consistent, and an inconsistentName error must be
|
|
returned on SET or CREATE requests."
|
|
::= { isisIPRAEntry 3 }
|
|
|
|
isisIPRANextHopIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index of next hop. Used when there are multiple Equal
|
|
Cost Multipath alternatives for the same destination."
|
|
::= { isisIPRAEntry 4 }
|
|
|
|
isisIPRANextHopType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of the IP next hop address."
|
|
::= { isisIPRAEntry 5 }
|
|
|
|
|
|
|
|
isisIPRANextHop OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP next hop to this destination.
|
|
|
|
The type of this address is determined by the value of
|
|
the isisIPRANextHopType object."
|
|
::= { isisIPRAEntry 6 }
|
|
|
|
isisIPRAType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
manual (1),
|
|
automatic (2)
|
|
}
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of this IP Reachable Address. Those of type
|
|
manual are created by the network manager. Those of type
|
|
automatic are created through propagation of routing
|
|
information from another routing protocol. This object
|
|
follows the ManualOrAutomatic behavior."
|
|
::= { isisIPRAEntry 7 }
|
|
|
|
isisIPRAExistState OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The state of this IP Reachable Address. This object
|
|
follows the ExistenceState and ManualOrAutomatic
|
|
behaviors. Support for 'createAndWait' and
|
|
'notInService' is not required.
|
|
|
|
A row entry cannot be modified when the value of this
|
|
object is 'active'."
|
|
::= { isisIPRAEntry 8 }
|
|
|
|
isisIPRAAdminState OBJECT-TYPE
|
|
SYNTAX IsisAdminState
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative state of the IP Reachable Address. This
|
|
object follows the IsisAdminState and ManualOrAutomatic
|
|
|
|
|
|
|
|
behaviors."
|
|
DEFVAL { off }
|
|
::= { isisIPRAEntry 9 }
|
|
|
|
isisIPRAMetric OBJECT-TYPE
|
|
SYNTAX IsisDefaultMetric
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric value for reaching the specified
|
|
destination over this circuit. This object follows the
|
|
ManualOrAutomatic behavior."
|
|
DEFVAL { 10 }
|
|
::= { isisIPRAEntry 10 }
|
|
|
|
isisIPRAMetricType OBJECT-TYPE
|
|
SYNTAX IsisMetricType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether the metric is internal or
|
|
external. This object follows the ManualOrAutomatic
|
|
behavior."
|
|
DEFVAL { internal }
|
|
::= { isisIPRAEntry 11 }
|
|
|
|
isisIPRAFullMetric OBJECT-TYPE
|
|
SYNTAX IsisFullMetric
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The wide metric value for reaching the specified
|
|
destination over this circuit. This object follows the
|
|
ManualOrAutomatic behavior."
|
|
DEFVAL { 10 }
|
|
::= { isisIPRAEntry 12 }
|
|
|
|
isisIPRASNPAAddress OBJECT-TYPE
|
|
SYNTAX IsisOSINSAddress
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNPA Address to which a PDU may be forwarded in
|
|
order to reach a destination that matches this IP
|
|
Reachable Address. This object follows the
|
|
ManualOrAutomatic behavior."
|
|
DEFVAL { ''H }
|
|
::= { isisIPRAEntry 13 }
|
|
|
|
|
|
|
|
isisIPRASourceType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
static (1),
|
|
direct (2),
|
|
ospfv2 (3),
|
|
ospfv3 (4),
|
|
isis (5),
|
|
rip (6),
|
|
igrp (7),
|
|
eigrp (8),
|
|
bgp (9),
|
|
other (10)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The origin of this route."
|
|
::= { isisIPRAEntry 14 }
|
|
|
|
-- The LSP Database Table
|
|
--
|
|
-- The first table provides Summary Information about LSPs
|
|
-- The next table provides a complete record
|
|
|
|
isisLSPSummaryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsisLSPSummaryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of LSP Headers."
|
|
::= { isisLSPDataBase 1 }
|
|
|
|
isisLSPSummaryEntry OBJECT-TYPE
|
|
SYNTAX IsisLSPSummaryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry provides a summary describing an
|
|
LSP currently stored in the system.
|
|
|
|
Dynamically learned rows will not survive an
|
|
agent reboot."
|
|
INDEX { isisLSPLevel,
|
|
isisLSPID }
|
|
::= { isisLSPSummaryTable 1 }
|
|
|
|
IsisLSPSummaryEntry ::=
|
|
|
|
|
|
|
|
SEQUENCE {
|
|
isisLSPLevel
|
|
IsisISLevel,
|
|
isisLSPID
|
|
IsisLinkStatePDUID,
|
|
isisLSPSeq
|
|
Unsigned32,
|
|
isisLSPZeroLife
|
|
TruthValue,
|
|
isisLSPChecksum
|
|
IsisUnsigned16TC,
|
|
isisLSPLifetimeRemain
|
|
IsisUnsigned16TC,
|
|
isisLSPPDULength
|
|
IsisUnsigned16TC,
|
|
isisLSPAttributes
|
|
IsisUnsigned8TC
|
|
}
|
|
|
|
isisLSPLevel OBJECT-TYPE
|
|
SYNTAX IsisISLevel
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"At which level does this LSP appear?"
|
|
::= { isisLSPSummaryEntry 1 }
|
|
|
|
isisLSPID OBJECT-TYPE
|
|
SYNTAX IsisLinkStatePDUID
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 8-byte LSP ID for this Link State PDU."
|
|
::= { isisLSPSummaryEntry 2 }
|
|
|
|
isisLSPSeq OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number for this LSP."
|
|
::= { isisLSPSummaryEntry 3 }
|
|
|
|
isisLSPZeroLife OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
|
|
|
|
|
|
"Is this LSP being purged by this system?"
|
|
::= { isisLSPSummaryEntry 4 }
|
|
|
|
isisLSPChecksum OBJECT-TYPE
|
|
SYNTAX IsisUnsigned16TC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 16-bit Fletcher Checksum for this LSP."
|
|
::= { isisLSPSummaryEntry 5 }
|
|
|
|
isisLSPLifetimeRemain OBJECT-TYPE
|
|
SYNTAX IsisUnsigned16TC
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remaining lifetime, in seconds, for this LSP."
|
|
::= { isisLSPSummaryEntry 6 }
|
|
|
|
isisLSPPDULength OBJECT-TYPE
|
|
SYNTAX IsisUnsigned16TC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of this LSP."
|
|
::= { isisLSPSummaryEntry 7 }
|
|
|
|
isisLSPAttributes OBJECT-TYPE
|
|
SYNTAX IsisUnsigned8TC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Flags carried by the LSP."
|
|
::= { isisLSPSummaryEntry 8 }
|
|
|
|
-- LSP Table
|
|
--
|
|
-- The full LSP as a sequence of {Type, Len, Value} tuples
|
|
-- Since the underlying LSP may have changed while downloading
|
|
-- TLVs, we provide the Sequence number and Checksum for each
|
|
-- LSP TLV, so the network manager may verify that they are
|
|
-- still working on the same version of the LSP.
|
|
|
|
isisLSPTLVTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IsisLSPTLVEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
|
|
|
|
|
|
DESCRIPTION
|
|
"The table of LSPs in the database."
|
|
::= { isisLSPDataBase 2 }
|
|
|
|
isisLSPTLVEntry OBJECT-TYPE
|
|
SYNTAX IsisLSPTLVEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Each entry describes a TLV within
|
|
an LSP currently stored in the system.
|
|
|
|
Dynamically learned rows will not survive an
|
|
agent reboot."
|
|
INDEX { isisLSPLevel,
|
|
isisLSPID,
|
|
isisLSPTLVIndex }
|
|
::= { isisLSPTLVTable 1 }
|
|
|
|
IsisLSPTLVEntry ::=
|
|
SEQUENCE {
|
|
isisLSPTLVIndex
|
|
Unsigned32,
|
|
isisLSPTLVSeq
|
|
Unsigned32,
|
|
isisLSPTLVChecksum
|
|
IsisUnsigned16TC,
|
|
isisLSPTLVType
|
|
IsisUnsigned8TC,
|
|
isisLSPTLVLen
|
|
IsisUnsigned8TC,
|
|
isisLSPTLVValue
|
|
OCTET STRING
|
|
}
|
|
|
|
isisLSPTLVIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32(1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index of this TLV in the LSP. The first TLV has
|
|
index 1, and the Nth TLV has an index of N."
|
|
::= { isisLSPTLVEntry 1 }
|
|
|
|
isisLSPTLVSeq OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
|
|
|
|
|
|
DESCRIPTION
|
|
"The sequence number for this LSP."
|
|
::= { isisLSPTLVEntry 2 }
|
|
|
|
isisLSPTLVChecksum OBJECT-TYPE
|
|
SYNTAX IsisUnsigned16TC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 16-bit Fletcher Checksum for this LSP."
|
|
::= { isisLSPTLVEntry 3 }
|
|
|
|
isisLSPTLVType OBJECT-TYPE
|
|
SYNTAX IsisUnsigned8TC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of this TLV."
|
|
::= { isisLSPTLVEntry 4 }
|
|
|
|
isisLSPTLVLen OBJECT-TYPE
|
|
SYNTAX IsisUnsigned8TC
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The length of this TLV."
|
|
::= { isisLSPTLVEntry 5 }
|
|
|
|
isisLSPTLVValue OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this TLV."
|
|
::= { isisLSPTLVEntry 6 }
|
|
|
|
|
|
-- The IS-IS Notification Table
|
|
|
|
-- The IS-IS Notification Table records fields that are
|
|
-- required for notifications
|
|
|
|
isisNotificationEntry OBJECT IDENTIFIER
|
|
::= { isisNotification 1 }
|
|
|
|
isisNotificationSysLevelIndex OBJECT-TYPE
|
|
SYNTAX IsisLevel
|
|
MAX-ACCESS accessible-for-notify
|
|
|
|
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The system level for this notification."
|
|
::= { isisNotificationEntry 1 }
|
|
|
|
isisNotificationCircIfIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..2147483647)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The identifier of this circuit relevant to
|
|
this notification."
|
|
::= { isisNotificationEntry 2 }
|
|
|
|
isisPduLspId OBJECT-TYPE
|
|
SYNTAX IsisLinkStatePDUID
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Octet String that uniquely identifies
|
|
a Link State PDU."
|
|
::= { isisNotificationEntry 3 }
|
|
|
|
isisPduFragment OBJECT-TYPE
|
|
SYNTAX IsisPDUHeader
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Holds up to 64 initial bytes of a PDU that
|
|
triggered the notification."
|
|
::= { isisNotificationEntry 4 }
|
|
|
|
isisPduFieldLen OBJECT-TYPE
|
|
SYNTAX IsisUnsigned8TC
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Holds the System ID length reported in PDU we received."
|
|
::= { isisNotificationEntry 5 }
|
|
|
|
isisPduMaxAreaAddress OBJECT-TYPE
|
|
SYNTAX IsisUnsigned8TC
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Holds the Max Area Addresses reported in a PDU
|
|
we received."
|
|
::= { isisNotificationEntry 6 }
|
|
|
|
|
|
|
|
isisPduProtocolVersion OBJECT-TYPE
|
|
SYNTAX IsisUnsigned8TC
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Holds the Protocol version reported in PDU we received."
|
|
::= { isisNotificationEntry 7 }
|
|
|
|
isisPduLspSize OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..2147483647)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Holds the size of LSP we received that is too
|
|
big to forward."
|
|
::= { isisNotificationEntry 8 }
|
|
|
|
isisPduOriginatingBufferSize OBJECT-TYPE
|
|
SYNTAX IsisUnsigned16TC (0..16000)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Holds the size of isisSysLevelOrigLSPBuffSize advertised
|
|
by the peer in the originatingLSPBufferSize TLV.
|
|
If the peer does not advertise this TLV, this
|
|
value is set to 0."
|
|
::= { isisNotificationEntry 9 }
|
|
|
|
isisPduBufferSize OBJECT-TYPE
|
|
SYNTAX IsisUnsigned16TC (0..16000)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Holds the size of LSP received from peer."
|
|
::= { isisNotificationEntry 10 }
|
|
|
|
isisPduProtocolsSupported OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..255))
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The list of protocols supported by an
|
|
adjacent system. This may be empty."
|
|
::= { isisNotificationEntry 11 }
|
|
|
|
isisAdjState OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
|
|
|
|
|
|
down (1),
|
|
initializing (2),
|
|
up (3),
|
|
failed(4)
|
|
}
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current state of an adjacency."
|
|
::= { isisNotificationEntry 12 }
|
|
|
|
isisErrorOffset OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An offset to a problem in a PDU. If the problem
|
|
is a malformed TLV, this points to the beginning
|
|
of the TLV. If the problem is in the header, this
|
|
points to the byte that is suspicious."
|
|
::= { isisNotificationEntry 13 }
|
|
|
|
isisErrorTLVType OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..255)
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type for a malformed TLV."
|
|
::= { isisNotificationEntry 14 }
|
|
|
|
isisNotificationAreaAddress OBJECT-TYPE
|
|
SYNTAX IsisOSINSAddress
|
|
MAX-ACCESS accessible-for-notify
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An Area Address."
|
|
::= { isisNotificationEntry 15 }
|
|
|
|
-- Notification definitions
|
|
--
|
|
-- Note that notifications can be disabled by setting
|
|
-- isisSysNotificationEnable false
|
|
|
|
isisDatabaseOverload NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
isisNotificationSysLevelIndex,
|
|
isisSysLevelState
|
|
}
|
|
|
|
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the system
|
|
enters or leaves the Overload state. The number
|
|
of times this has been generated and cleared is kept
|
|
track of by isisSysStatLSPDbaseOloads."
|
|
::= { isisNotifications 1 }
|
|
|
|
isisManualAddressDrops NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
isisNotificationAreaAddress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when one of the
|
|
manual areaAddresses assigned to this system is
|
|
ignored when computing routes. The object
|
|
isisNotificationAreaAddress describes the area that
|
|
has been dropped.
|
|
|
|
The number of times this event has been generated
|
|
is counted by isisSysStatManAddrDropFromAreas.
|
|
|
|
The agent must throttle the generation of
|
|
consecutive isisManualAddressDrops notifications
|
|
so that there is at least a 5-second gap between
|
|
notifications of this type. When notifications
|
|
are throttled, they are dropped, not queued for
|
|
sending at a future time."
|
|
::= { isisNotifications 2 }
|
|
|
|
isisCorruptedLSPDetected NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
isisNotificationSysLevelIndex,
|
|
isisPduLspId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when we find that
|
|
an LSP that was stored in memory has become
|
|
corrupted. The number of times this has been
|
|
generated is counted by isisSysCorrLSPs.
|
|
|
|
We forward an LSP ID. We may have independent
|
|
knowledge of the ID, but in some implementations
|
|
there is a chance that the ID itself will be
|
|
corrupted."
|
|
|
|
|
|
|
|
|
|
::= { isisNotifications 3 }
|
|
|
|
isisAttemptToExceedMaxSequence NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
isisNotificationSysLevelIndex,
|
|
isisPduLspId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When the sequence number on an LSP we generate
|
|
wraps the 32-bit sequence counter, we purge and
|
|
wait to re-announce this information. This
|
|
notification describes that event. Since these
|
|
should not be generated rapidly, we generate
|
|
an event each time this happens.
|
|
|
|
While the first 6 bytes of the LSPID are ours,
|
|
the other two contain useful information."
|
|
|
|
::= { isisNotifications 4 }
|
|
|
|
isisIDLenMismatch NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
isisNotificationSysLevelIndex,
|
|
isisPduFieldLen,
|
|
isisNotificationCircIfIndex,
|
|
isisPduFragment
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification sent when we receive a PDU
|
|
with a different value for the System ID Length.
|
|
This notification includes an index to identify
|
|
the circuit where we saw the PDU and the header of
|
|
the PDU, which may help a network manager identify
|
|
the source of the confusion.
|
|
|
|
The agent must throttle the generation of
|
|
consecutive isisIDLenMismatch notifications
|
|
so that there is at least a 5-second gap between
|
|
notifications of this type. When notifications
|
|
are throttled, they are dropped, not queued for
|
|
sending at a future time."
|
|
|
|
::= { isisNotifications 5 }
|
|
|
|
isisMaxAreaAddressesMismatch NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
|
|
|
|
|
|
isisNotificationSysLevelIndex,
|
|
isisPduMaxAreaAddress,
|
|
isisNotificationCircIfIndex,
|
|
isisPduFragment
|
|
}
|
|
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification sent when we receive a PDU
|
|
with a different value for the Maximum Area
|
|
Addresses. This notification includes the
|
|
header of the packet, which may help a
|
|
network manager identify the source of the
|
|
confusion.
|
|
|
|
The agent must throttle the generation of
|
|
consecutive isisMaxAreaAddressesMismatch
|
|
notifications so that there is at least a 5-second
|
|
gap between notifications of this type. When
|
|
notifications are throttled, they are dropped, not
|
|
queued for sending at a future time."
|
|
|
|
::= { isisNotifications 6 }
|
|
|
|
isisOwnLSPPurge NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
isisNotificationSysLevelIndex,
|
|
isisNotificationCircIfIndex,
|
|
isisPduLspId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification sent when we receive a PDU
|
|
with our systemID and zero age. This
|
|
notification includes the circuit Index
|
|
and router ID from the LSP, if available,
|
|
which may help a network manager
|
|
identify the source of the confusion."
|
|
|
|
::= { isisNotifications 7 }
|
|
|
|
isisSequenceNumberSkip NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
isisNotificationSysLevelIndex,
|
|
isisNotificationCircIfIndex,
|
|
isisPduLspId
|
|
}
|
|
STATUS current
|
|
|
|
|
|
|
|
DESCRIPTION
|
|
"When we receive an LSP with our System ID
|
|
and different contents, we may need to reissue
|
|
the LSP with a higher sequence number.
|
|
|
|
We send this notification if we need to increase
|
|
the sequence number by more than one. If two
|
|
Intermediate Systems are configured with the same
|
|
System ID, this notification will fire."
|
|
|
|
::= { isisNotifications 8 }
|
|
|
|
isisAuthenticationTypeFailure NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
isisNotificationSysLevelIndex,
|
|
isisNotificationCircIfIndex,
|
|
isisPduFragment
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification sent when we receive a PDU
|
|
with the wrong authentication type field.
|
|
This notification includes the header of the
|
|
packet, which may help a network manager
|
|
identify the source of the confusion.
|
|
|
|
The agent must throttle the generation of
|
|
consecutive isisAuthenticationTypeFailure
|
|
notifications so that there is at least a 5-second
|
|
gap between notifications of this type. When
|
|
notifications are throttled, they are dropped, not
|
|
queued for sending at a future time."
|
|
|
|
::= { isisNotifications 9 }
|
|
|
|
isisAuthenticationFailure NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
isisNotificationSysLevelIndex,
|
|
isisNotificationCircIfIndex,
|
|
isisPduFragment
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification sent when we receive a PDU
|
|
with an incorrect authentication information
|
|
field. This notification includes the header
|
|
of the packet, which may help a network manager
|
|
identify the source of the confusion.
|
|
|
|
|
|
|
|
The agent must throttle the generation of
|
|
consecutive isisAuthenticationFailure
|
|
notifications so that there is at least a 5-second
|
|
gap between notifications of this type. When
|
|
notifications are throttled, they are dropped, not
|
|
queued for sending at a future time."
|
|
|
|
::= { isisNotifications 10 }
|
|
|
|
isisVersionSkew NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
isisNotificationSysLevelIndex,
|
|
isisNotificationCircIfIndex,
|
|
isisPduProtocolVersion,
|
|
isisPduFragment
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification sent when we receive a Hello
|
|
PDU from an IS running a different version
|
|
of the protocol. This notification includes
|
|
the header of the packet, which may help a
|
|
network manager identify the source of the
|
|
confusion.
|
|
|
|
The agent must throttle the generation of
|
|
consecutive isisVersionSkew notifications
|
|
so that there is at least a 5-second gap
|
|
between notifications of this type. When
|
|
notifications are throttled, they are dropped, not
|
|
queued for sending at a future time."
|
|
|
|
::= { isisNotifications 11 }
|
|
|
|
isisAreaMismatch NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
isisNotificationCircIfIndex,
|
|
isisPduFragment
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification sent when we receive a Hello
|
|
PDU from an IS that does not share any
|
|
area address. This notification includes
|
|
the header of the packet, which may help a
|
|
network manager identify the source of the
|
|
confusion.
|
|
|
|
|
|
|
|
|
|
The agent must throttle the generation of
|
|
consecutive isisAreaMismatch notifications
|
|
so that there is at least a 5-second gap
|
|
between notifications of this type. When
|
|
notifications are throttled, they are dropped, not
|
|
queued for sending at a future time."
|
|
|
|
::= { isisNotifications 12 }
|
|
|
|
isisRejectedAdjacency NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
isisNotificationSysLevelIndex,
|
|
isisNotificationCircIfIndex,
|
|
isisPduFragment
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification sent when we receive a Hello
|
|
PDU from an IS but do not establish an
|
|
adjacency for some reason.
|
|
|
|
The agent must throttle the generation of
|
|
consecutive isisRejectedAdjacency notifications
|
|
so that there is at least a 5-second gap
|
|
between notifications of this type. When
|
|
notifications are throttled, they are dropped, not
|
|
queued for sending at a future time."
|
|
|
|
::= { isisNotifications 13 }
|
|
|
|
isisLSPTooLargeToPropagate NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
isisNotificationSysLevelIndex,
|
|
isisNotificationCircIfIndex,
|
|
isisPduLspSize,
|
|
isisPduLspId
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification sent when we attempt to propagate
|
|
an LSP that is larger than the dataLinkBlockSize
|
|
for the circuit.
|
|
|
|
The agent must throttle the generation of
|
|
consecutive isisLSPTooLargeToPropagate notifications
|
|
so that there is at least a 5-second gap
|
|
between notifications of this type. When
|
|
notifications are throttled, they are dropped, not
|
|
|
|
|
|
|
|
queued for sending at a future time."
|
|
|
|
::= { isisNotifications 14 }
|
|
|
|
isisOrigLSPBuffSizeMismatch NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
isisNotificationSysLevelIndex,
|
|
isisNotificationCircIfIndex,
|
|
isisPduLspId,
|
|
isisPduOriginatingBufferSize,
|
|
isisPduBufferSize
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification sent when a Level 1 LSP or Level
|
|
2 LSP is received that is larger than the local
|
|
value for isisSysLevelOrigLSPBuffSize, or when an
|
|
LSP is received that contains the supported Buffer Size
|
|
option and the value in the PDU option field does
|
|
not match the local value for isisSysLevelOrigLSPBuffSize.
|
|
We pass up the size from the option field and the
|
|
size of the LSP when one of them exceeds our configuration.
|
|
|
|
The agent must throttle the generation of
|
|
consecutive isisOrigLSPBuffSizeMismatch notifications
|
|
so that there is at least a 5-second gap
|
|
between notifications of this type. When
|
|
notifications are throttled, they are dropped, not
|
|
queued for sending at a future time."
|
|
|
|
::= { isisNotifications 15 }
|
|
|
|
isisProtocolsSupportedMismatch NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
isisNotificationSysLevelIndex,
|
|
isisNotificationCircIfIndex,
|
|
isisPduProtocolsSupported,
|
|
isisPduLspId,
|
|
isisPduFragment
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification sent when a non-pseudonode
|
|
segment 0 LSP is received that has no matching
|
|
protocols supported. This may be because the system
|
|
does not generate the field, or because there are no
|
|
common elements. The list of protocols supported
|
|
should be included in the notification: it may be
|
|
|
|
|
|
|
|
empty if the TLV is not supported, or if the
|
|
TLV is empty.
|
|
|
|
The agent must throttle the generation of
|
|
consecutive isisProtocolsSupportedMismatch
|
|
notifications so that there is at least a 5-second
|
|
gap between notifications of this type. When
|
|
notifications are throttled, they are dropped, not
|
|
queued for sending at a future time."
|
|
|
|
::= { isisNotifications 16 }
|
|
|
|
isisAdjacencyChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
isisNotificationSysLevelIndex,
|
|
isisNotificationCircIfIndex,
|
|
isisPduLspId,
|
|
isisAdjState
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A notification sent when an adjacency changes
|
|
state, entering or leaving state up.
|
|
The first 6 bytes of the isisPduLspId are the
|
|
SystemID of the adjacent IS.
|
|
The isisAdjState is the new state of the adjacency."
|
|
|
|
::= { isisNotifications 17 }
|
|
|
|
isisLSPErrorDetected NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
isisNotificationSysLevelIndex,
|
|
isisPduLspId,
|
|
isisNotificationCircIfIndex,
|
|
isisPduFragment,
|
|
isisErrorOffset,
|
|
isisErrorTLVType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when we receive
|
|
an LSP with a parse error. The isisCircIfIndex
|
|
holds an index of the circuit on which the PDU
|
|
arrived. The isisPduFragment holds the start of the
|
|
LSP, and the isisErrorOffset points to the problem.
|
|
|
|
If the problem is a malformed TLV, isisErrorOffset
|
|
points to the start of the TLV, and isisErrorTLVType
|
|
|
|
|
|
|
|
holds the value of the type.
|
|
|
|
If the problem is with the LSP header, isisErrorOffset
|
|
points to the suspicious byte.
|
|
|
|
The number of such LSPs is accumulated in
|
|
isisSysStatLSPErrors."
|
|
|
|
::= { isisNotifications 18 }
|
|
|
|
-- Agent Conformance Definitions
|
|
-- We define the objects a conformant agent must define
|
|
|
|
isisCompliances OBJECT IDENTIFIER ::= { isisConformance 1 }
|
|
isisGroups OBJECT IDENTIFIER ::= { isisConformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
isisCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for agents that support
|
|
the IS-IS MIB.
|
|
|
|
There are a number of INDEX objects that cannot be
|
|
represented in the form of OBJECT clauses in SMIv2,
|
|
but for which there are compliance requirements.
|
|
Those requirements and similar requirements for
|
|
related objects are expressed below, in
|
|
pseudo-OBJECT clause form, in this description:
|
|
|
|
-- OBJECT isisSummAddressType
|
|
-- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
|
|
--
|
|
-- DESCRIPTION
|
|
-- The MIB requires support for IPv4 Summary
|
|
-- Addresses and anticipates the support of
|
|
-- IPv6 addresses.
|
|
--
|
|
--
|
|
-- OBJECT isisRedistributeAddrType
|
|
-- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
|
|
--
|
|
-- DESCRIPTION
|
|
-- The MIB requires support for IPv4
|
|
-- Redistribution Addresses and anticipates
|
|
-- the support of IPv6 addresses."
|
|
--
|
|
|
|
|
|
|
|
--
|
|
-- OBJECT isisISAdjIPAddrType
|
|
-- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
|
|
--
|
|
-- DESCRIPTION
|
|
-- The MIB requires support for IPv4
|
|
-- Adjacency Addresses and anticipates the
|
|
-- support of IPv6 addresses.
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
isisSystemGroup,
|
|
isisCircuitGroup,
|
|
isisISAdjGroup,
|
|
isisNotificationObjectGroup,
|
|
isisNotificationGroup
|
|
}
|
|
::= { isisCompliances 1 }
|
|
|
|
-- List of all groups, mandatory and optional
|
|
isisAdvancedCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for agents that fully
|
|
support the IS-IS MIB.
|
|
|
|
There are a number of INDEX objects that cannot be
|
|
represented in the form of OBJECT clauses in SMIv2,
|
|
but for which there are compliance requirements.
|
|
Those requirements and similar requirements for
|
|
related objects are expressed below, in
|
|
pseudo-OBJECT clause form, in this description:
|
|
|
|
-- OBJECT isisSummAddressType
|
|
-- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
|
|
--
|
|
-- DESCRIPTION
|
|
-- The MIB requires support for IPv4 Summary
|
|
-- Addresses and anticipates the support of
|
|
-- IPv6 addresses.
|
|
--
|
|
--
|
|
-- OBJECT isisRedistributeAddrType
|
|
-- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
|
|
--
|
|
-- DESCRIPTION
|
|
-- The MIB requires support for IPv4
|
|
-- Redistribution Addresses and anticipates
|
|
-- the support of IPv6 addresses."
|
|
|
|
|
|
|
|
--
|
|
--
|
|
-- OBJECT isisISAdjIPAddrType
|
|
-- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
|
|
--
|
|
-- DESCRIPTION
|
|
-- The MIB requires support for IPv4
|
|
-- Adjacency Addresses and anticipates the
|
|
-- support of IPv6 addresses.
|
|
--
|
|
--
|
|
-- OBJECT isisIPRADestType
|
|
-- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
|
|
--
|
|
-- DESCRIPTION
|
|
-- The MIB requires support for IPv4 RA
|
|
-- Addresses and anticipates the support of
|
|
-- IPv6 addresses.
|
|
--
|
|
--
|
|
-- OBJECT isisIPRANextHopType
|
|
-- SYNTAX InetAddressType { ipv4(1), ipv6(2) }
|
|
--
|
|
-- DESCRIPTION
|
|
-- The MIB requires support for IPv4 NextHop
|
|
-- Addresses and anticipates the support of
|
|
-- IPv6 addresses.
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
isisSystemGroup,
|
|
isisCircuitGroup,
|
|
isisISAdjGroup,
|
|
isisNotificationObjectGroup,
|
|
isisNotificationGroup,
|
|
isisISPDUCounterGroup,
|
|
isisRATableGroup,
|
|
isisISIPRADestGroup,
|
|
isisLSPGroup
|
|
}
|
|
::= { isisCompliances 2 }
|
|
|
|
isisReadOnlyCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this MIB is implemented without support for
|
|
read-create (i.e., in read-only mode), the
|
|
implementation can claim read-only compliance. Such
|
|
a device can then be monitored but cannot be
|
|
|
|
|
|
|
|
configured with this MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
isisSystemGroup,
|
|
isisCircuitGroup,
|
|
isisISAdjGroup
|
|
}
|
|
|
|
OBJECT isisSysLevelType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisSysID
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisSysMaxPathSplits
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisSysMaxLSPGenInt
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisSysPollESHelloRate
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisSysWaitTime
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisSysAdminState
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisSysL2toL1Leaking
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
|
|
|
|
|
|
OBJECT isisSysMaxAge
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisManAreaAddrExistState
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisSysLevelOrigLSPBuffSize
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisSysLevelMinLSPGenInt
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisSysLevelSetOverload
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisSysLevelSetOverloadUntil
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisSysLevelMetricStyle
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisSysLevelSPFConsiders
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisSysLevelTEEnabled
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisSysReceiveLSPBufferSize
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
|
|
|
|
|
|
"Write access is not required."
|
|
|
|
OBJECT isisSummAddrExistState
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisSummAddrMetric
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisSummAddrFullMetric
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisRedistributeAddrExistState
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCircAdminState
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCircExistState
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCircType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCircExtDomain
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCircLevelType
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCircPassiveCircuit
|
|
|
|
|
|
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCircMeshGroupEnabled
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCircMeshGroup
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCircSmallHellos
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCircExtendedCircID
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCircIfIndex
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCirc3WayEnabled
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCircLevelMetric
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCircLevelWideMetric
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCircLevelISPriority
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
|
|
|
|
OBJECT isisCircLevelHelloMultiplier
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCircLevelHelloTimer
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCircLevelDRHelloTimer
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCircLevelLSPThrottle
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCircLevelMinLSPRetransInt
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCircLevelCSNPInterval
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
OBJECT isisCircLevelPartSNPInterval
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Write access is not required."
|
|
|
|
::= { isisCompliances 3 }
|
|
|
|
-- MIB Grouping
|
|
|
|
isisSystemGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
isisSysVersion,
|
|
isisSysLevelType,
|
|
isisSysID,
|
|
isisSysMaxPathSplits,
|
|
isisSysMaxLSPGenInt,
|
|
isisSysPollESHelloRate,
|
|
isisSysWaitTime,
|
|
|
|
|
|
|
|
isisSysAdminState,
|
|
isisSysL2toL1Leaking,
|
|
isisSysMaxAge,
|
|
isisSysProtSupported,
|
|
isisSysNotificationEnable,
|
|
isisManAreaAddrExistState,
|
|
isisSysLevelOrigLSPBuffSize,
|
|
isisSysLevelMinLSPGenInt,
|
|
isisSysLevelState,
|
|
isisSysLevelSetOverload,
|
|
isisSysLevelSetOverloadUntil,
|
|
isisSysLevelMetricStyle,
|
|
isisSysLevelSPFConsiders,
|
|
isisSysLevelTEEnabled,
|
|
isisSysReceiveLSPBufferSize,
|
|
isisSummAddrExistState,
|
|
isisSummAddrMetric,
|
|
isisAreaAddr,
|
|
isisSummAddrFullMetric,
|
|
isisRedistributeAddrExistState,
|
|
isisRouterHostName,
|
|
isisRouterID,
|
|
isisSysStatCorrLSPs,
|
|
isisSysStatLSPDbaseOloads,
|
|
isisSysStatManAddrDropFromAreas,
|
|
isisSysStatAttmptToExMaxSeqNums,
|
|
isisSysStatSeqNumSkips,
|
|
isisSysStatOwnLSPPurges,
|
|
isisSysStatIDFieldLenMismatches,
|
|
isisSysStatPartChanges,
|
|
isisSysStatSPFRuns,
|
|
isisSysStatAuthTypeFails,
|
|
isisSysStatAuthFails,
|
|
isisSysStatLSPErrors
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collections of objects used to manage an
|
|
IS-IS router."
|
|
::= { isisGroups 1 }
|
|
|
|
isisCircuitGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
isisNextCircIndex,
|
|
isisCircAdminState,
|
|
isisCircExistState,
|
|
isisCircType,
|
|
isisCircExtDomain,
|
|
|
|
|
|
|
|
isisCircLevelType,
|
|
isisCircAdjChanges,
|
|
isisCircNumAdj,
|
|
isisCircInitFails,
|
|
isisCircRejAdjs,
|
|
isisCircIDFieldLenMismatches,
|
|
isisCircMaxAreaAddrMismatches,
|
|
isisCircAuthTypeFails,
|
|
isisCircAuthFails,
|
|
isisCircLANDesISChanges,
|
|
isisCircPassiveCircuit,
|
|
isisCircMeshGroupEnabled,
|
|
isisCircMeshGroup,
|
|
isisCircSmallHellos,
|
|
isisCircLastUpTime,
|
|
isisCirc3WayEnabled,
|
|
isisCircExtendedCircID,
|
|
isisCircIfIndex,
|
|
isisCircLevelMetric,
|
|
isisCircLevelWideMetric,
|
|
isisCircLevelISPriority,
|
|
isisCircLevelIDOctet,
|
|
isisCircLevelID,
|
|
isisCircLevelDesIS,
|
|
isisCircLevelHelloMultiplier,
|
|
isisCircLevelHelloTimer,
|
|
isisCircLevelDRHelloTimer,
|
|
isisCircLevelLSPThrottle,
|
|
isisCircLevelMinLSPRetransInt,
|
|
isisCircLevelCSNPInterval,
|
|
isisCircLevelPartSNPInterval
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collections of objects used to describe an
|
|
IS-IS Circuit."
|
|
::= { isisGroups 2 }
|
|
|
|
isisISAdjGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
isisISAdjState,
|
|
isisISAdj3WayState,
|
|
isisISAdjNeighSNPAAddress,
|
|
isisISAdjNeighSysType,
|
|
isisISAdjNeighSysID,
|
|
isisISAdjNbrExtendedCircID,
|
|
isisISAdjUsage,
|
|
isisISAdjHoldTimer,
|
|
|
|
|
|
|
|
isisISAdjNeighPriority,
|
|
isisISAdjLastUpTime,
|
|
isisISAdjAreaAddress,
|
|
isisISAdjIPAddrType,
|
|
isisISAdjIPAddrAddress,
|
|
isisISAdjProtSuppProtocol
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collections of objects used to manage an
|
|
IS-IS Adjacency."
|
|
::= { isisGroups 3 }
|
|
|
|
isisNotificationObjectGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
isisNotificationSysLevelIndex,
|
|
isisNotificationCircIfIndex,
|
|
isisPduLspId,
|
|
isisPduFragment,
|
|
isisPduFieldLen,
|
|
isisPduMaxAreaAddress,
|
|
isisPduProtocolVersion,
|
|
isisPduLspSize,
|
|
isisPduOriginatingBufferSize,
|
|
isisPduBufferSize,
|
|
isisPduProtocolsSupported,
|
|
isisAdjState,
|
|
isisErrorOffset,
|
|
isisErrorTLVType,
|
|
isisNotificationAreaAddress
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The objects used to record notification parameters."
|
|
::= { isisGroups 4 }
|
|
|
|
|
|
isisNotificationGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
isisDatabaseOverload,
|
|
isisManualAddressDrops,
|
|
isisCorruptedLSPDetected,
|
|
isisAttemptToExceedMaxSequence,
|
|
isisIDLenMismatch,
|
|
isisMaxAreaAddressesMismatch,
|
|
isisOwnLSPPurge,
|
|
isisSequenceNumberSkip,
|
|
isisAuthenticationTypeFailure,
|
|
|
|
|
|
|
|
isisAuthenticationFailure,
|
|
isisVersionSkew,
|
|
isisAreaMismatch,
|
|
isisRejectedAdjacency,
|
|
isisLSPTooLargeToPropagate,
|
|
isisOrigLSPBuffSizeMismatch,
|
|
isisProtocolsSupportedMismatch,
|
|
isisAdjacencyChange,
|
|
isisLSPErrorDetected
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collections of notifications sent by an IS."
|
|
::= { isisGroups 5 }
|
|
|
|
|
|
isisISPDUCounterGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
isisPacketCountIIHello,
|
|
isisPacketCountISHello,
|
|
isisPacketCountESHello,
|
|
isisPacketCountLSP,
|
|
isisPacketCountCSNP,
|
|
isisPacketCountPSNP,
|
|
isisPacketCountUnknown
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collections of objects used to count protocol PDUs."
|
|
::= { isisGroups 6 }
|
|
|
|
|
|
isisRATableGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
isisRAExistState,
|
|
isisRAAdminState,
|
|
isisRAAddrPrefix,
|
|
isisRAMapType,
|
|
isisRAMetric,
|
|
isisRAMetricType,
|
|
isisRASNPAAddress,
|
|
isisRASNPAMask,
|
|
isisRASNPAPrefix,
|
|
isisRAType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collections of objects used to manage the
|
|
|
|
|
|
|
|
reachable NSAP prefixes."
|
|
::= { isisGroups 7 }
|
|
|
|
|
|
isisISIPRADestGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
isisIPRANextHopType,
|
|
isisIPRANextHop,
|
|
isisIPRAType,
|
|
isisIPRAExistState,
|
|
isisIPRAAdminState,
|
|
isisIPRAMetric,
|
|
isisIPRAFullMetric,
|
|
isisIPRAMetricType,
|
|
isisIPRASNPAAddress,
|
|
isisIPRASourceType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collections of objects used to manage configured
|
|
IP addresses."
|
|
::= { isisGroups 8 }
|
|
|
|
isisLSPGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
isisLSPSeq,
|
|
isisLSPZeroLife,
|
|
isisLSPChecksum,
|
|
isisLSPLifetimeRemain,
|
|
isisLSPPDULength,
|
|
isisLSPAttributes,
|
|
isisLSPTLVSeq,
|
|
isisLSPTLVChecksum,
|
|
isisLSPTLVType,
|
|
isisLSPTLVLen,
|
|
isisLSPTLVValue
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collections of objects used to observe the LSP
|
|
Database."
|
|
::= { isisGroups 9 }
|
|
|
|
END
|