mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
librenms-librenms/mibs/AT-SYSINFO-MIB
Adam Amstrong a4ef7f5506 move more mibs to route (hp and allied telesis/syn) 
git-svn-id: http://www.observium.org/svn/observer/trunk@1577 61d68cd4-352d-0410-923a-c4978735b2b8
2010-07-31 16:56:02 +00:00

994 lines
33 KiB
Plaintext
Raw Blame History

-- ============================================================================
-- AT-SYSINFO.MIB, Allied Telesis enterprise
--
-- Copyright (c) 2006 by Allied Telesis, Inc.
-- All rights reserved.
--
-- ============================================================================
AT-SYSINFO-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC
atRouter,
DisplayStringUnsized
FROM AT-SMI-MIB
InterfaceIndex
FROM IF-MIB
;
sysinfo MODULE-IDENTITY
LAST-UPDATED "200802260000Z"
ORGANIZATION "Allied Telesis, Inc."
CONTACT-INFO
" http://www.alliedtelesis.com"
DESCRIPTION
"Subtree beneath which system inforamtion ids are assigned.
It contains generic system information, as follows:
{ sysinfo 1 } fanAndPs
{ sysinfo 2 } restartGroup
{ sysinfo 3 } cpu
{ sysinfo 4 } sysTemperature
{ sysinfo 5 } atrContactDetails
{ sysinfo 6 } bbrNvs
{ sysinfo 9 } hostId
{ sysinfo 10 } envMon
{ sysinfo 11 } xem
{ sysinfo 12 } awpEnvMon
{ sysinfo 13 } awpStack
{ sysinfo 14 } atPortInfo"
REVISION "200802260000Z"
DESCRIPTION
"Changed top DESCRIPTION section."
REVISION "200606140000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { atRouter 3 }
-- fanAndPs - this group contains information about the Fan, Power Supply and
-- Temperature status of the router. Some of the variables and their values
-- borrow from the fstswitch MIB.
-- This group was added on 21/Jun/2001 by Tony van der Peet on request from ATKK.
fanAndPs OBJECT IDENTIFIER ::= { sysinfo 1 }
fanAndPsRpsConnectionStatus OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
connected(1),
notConnected(2),
notMonitoring(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the Redundant Power Supply (RPS) connection,
ie, whether an RPS is actually connected or not, regardless
of whether the RPS is on or not. notSupported means that an
RPS is not supported in this hardware platform, connected
means that the RPS is connected, notConnected means that the
RPS is not connected, and notMonitoring means that the status
of the RPS is not being monitored presently. RPS monitoring can
be turned on via the variable fanAndPsRpsMonitoringStatus, or
by the command SET SYSTEM RPSMONITOR=ON."
::= { fanAndPs 1 }
fanAndPsMainPSUStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2),
faulty(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the main Power Supply. on means that the power supply is present
and fully operational. off means that the power supply is totally off (and
obviously only applies to systems with a redundant power supply). faulty means
that the main power supply is delivering power but that a component of the
power supply is faulty. This applies to systems like SwitchBlade which have 3
power supplies but do not provide individual power supply monitoring. Also,
in the case of SwitchBlade, power supply status includes the status of the fans
in the power supply."
::= { fanAndPs 2 }
fanAndPsRedundantPSUStatus OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
on(1),
off(2),
notMonitoring(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the redundant Power Supply. notSupported means
this device does not support redundant power supplies, on
means that the redundant power supply is connected and able
to supply system power if required, off means that the
redundant power supply is either not connected or is connected
and is not able to supply system power if required, and
notMonitoring means that the status of the RPS is not being
monitored presently. RPS monitoring can be turned on via the
variable fanAndPsRpsMonitoringStatus, or by the command
SET SYSTEM RPSMONITOR=ON."
::= { fanAndPs 3 }
fanAndPsRpsMonitoringStatus OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current status of redundant power supply monitoring. The
monitoring of the redundant power supply and its fan must be
enabled by command or by setting this variable to on. The value
notSupported means that this device does not support redundant
power supplies. Only the values on or off may be written to this
variable. If this variables reads as notSupported, an attempt to
write to this variable will result in a bad value error."
::= { fanAndPs 4 }
fanAndPsMainFanStatus OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
ok(1),
notOk(2),
warning(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the main Power Supply fan. notSupported means that this
device does not support monitoring on the main power supply fan, or that
there is no main power supply fan. The warning means the fan's speed is
outside 30% of the expected speed."
::= { fanAndPs 5 }
fanAndPsRedundantFanStatus OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
ok(1),
notOk(2),
notMonitoring(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the redundant Power Supply Fan. notSupported means
this device does not support redundant power supplies, ok
means that the redundant power supply fan is running, notOk means
that the redundant power supply fan is not running, and
notMonitoring means that the status of the RPS is not being
monitored presently. RPS monitoring can be turned on via the
variable fanAndPsRpsMonitoringStatus, or by the command
SET SYSTEM RPSMONITOR=ON."
::= { fanAndPs 6 }
fanAndPsTemperatureStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
notOk(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of temperature in this device. ok means that the
device is not capable of monitoring temperature or that the
temperature is OK, notOk means that the temperature is being
monitored and is currently out of the range 0C - 45C."
::= { fanAndPs 7 }
fanAndPsFanTrayPresent OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
present(1),
notPresent(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the presence of the fan tray in this system. Systems
which do not support a fan tray return the value notSupported. Upon
removal of the fan tray there is a short period (20s) before the value of
this variable is changed to notPresent. This is to allow for scheduled
replacement and/or cleaning of the fan tray."
::= { fanAndPs 8 }
fanAndPsFanTrayStatus OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
ok(1),
notOk(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the fan tray in this system. Systems which do not support
a fan tray return the value notSupported. The value ok is returned if all fans
in the fan tray are running at full speed. The value notOk is returned if
one of more of the fan tray fans is running slow or has stalled."
::= { fanAndPs 9 }
fanAndPsMainMonitoringStatus OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
ok(1),
notOk(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of main power supply monitoring. The
monitoring of the main power supply and its fan is always
enabled by those systems that support it. Systems which do
not support main power supply or fan monitoring report a
value of notSupported. The value ok is returned for those
systems that do support main power supply and fan monitoring,
and where the monitoring operation is reporting valid information (refer
to fanAndPsMainFanStatus for the current status of the system).
When main power supply and fan monitoring is failing, the value
notOk is returned."
::= { fanAndPs 10 }
-- fanAndPsPsuStatusTable - AT8948 specific power supply monitoring.
-- Added on by Elizabeth Kennett/Wenhua Wei for AT8948 project.
fanAndPsPsuStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF FanAndPsPsuStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of AT8948 fanAndPsPsuStatusTable. Each entry in the table
represents the status of one of the power supplies in AT8948 system.
Each power supply has its own board ID."
::= { fanAndPs 11 }
fanAndPsPsuStatusEntry OBJECT-TYPE
SYNTAX FanAndPsPsuStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single entry of AT8948 fanAndPsPsuStatusTable, indexed by
fanAndPsPsuNumber field."
INDEX { fanAndPsPsuNumber }
::= { fanAndPsPsuStatusTable 1 }
FanAndPsPsuStatusEntry ::=
SEQUENCE {
fanAndPsPsuNumber
INTEGER,
fanAndPsPsuPresent
INTEGER,
fanAndPsPsuType
INTEGER,
fanAndPsPsuFan
INTEGER,
fanAndPsPsuTemperature
INTEGER,
fanAndPsPsuPower
INTEGER
}
fanAndPsPsuNumber OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PSU board identity for which this entry holds. If the system
consists only of a single PSU board, only one entry will appear
in the table, whose index is 1."
::= { fanAndPsPsuStatusEntry 1 }
fanAndPsPsuPresent OBJECT-TYPE
SYNTAX INTEGER{
yes(0),
no (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PSU present state, displayed as 'yes' if present, or 'no' if absent."
::= { fanAndPsPsuStatusEntry 2 }
fanAndPsPsuType OBJECT-TYPE
SYNTAX INTEGER{
ac(0),
dc(1),
fan(2),
notPresent(3),
notSupported(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PSU type, displayed as AC, or DC, or FAN, or NOT PRESENT."
::= { fanAndPsPsuStatusEntry 3 }
fanAndPsPsuFan OBJECT-TYPE
SYNTAX INTEGER{
ok(0),
fail(1),
notPresent(2),
notSupported(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PSU fan status, displayed as OK, or FAIL, or NOT PRESENT."
::= { fanAndPsPsuStatusEntry 4 }
fanAndPsPsuTemperature OBJECT-TYPE
SYNTAX INTEGER{
good(0),
high(1),
notPresent(2),
notSupported(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PSU temperature, displayed as GOOD, or HIGH, or NOT PRESENT,
or NOT SUPPORTED."
::= { fanAndPsPsuStatusEntry 5 }
fanAndPsPsuPower OBJECT-TYPE
SYNTAX INTEGER{
good(0),
bad(1),
notPresent(2),
notSupported(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The PSU power status, displayed as GOOD, or BAD, or NOT PRESENT
or NOT SUPPORTED."
::= { fanAndPsPsuStatusEntry 6 }
fanAndPsAccelFanStatus OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
ok(1),
notOk(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the accelerator card fans. Non-supported means this
device does not support monitoring of the accelerator card fans."
::= { fanAndPs 12 }
-- fanAndPs traps - traps exist for changes to power supply status, fan status
-- and temperature status.
fanAndPsTrap OBJECT IDENTIFIER ::= { fanAndPs 0 }
fanAndPsRpsConnectionTrap NOTIFICATION-TYPE
OBJECTS { fanAndPsRpsConnectionStatus }
STATUS current
DESCRIPTION
"Generated when the RPS connection status changes."
::= { fanAndPsTrap 1 }
fanAndPsMainPSUStatusTrap NOTIFICATION-TYPE
OBJECTS { fanAndPsMainPSUStatus }
STATUS current
DESCRIPTION
"Generated when the main power supply status changes."
::= { fanAndPsTrap 2 }
fanAndPsRedundantPSUStatusTrap NOTIFICATION-TYPE
OBJECTS { fanAndPsRedundantPSUStatus }
STATUS current
DESCRIPTION
"Generated when the RPS status changes."
::= { fanAndPsTrap 3 }
fanAndPsMainFanStatusTrap NOTIFICATION-TYPE
OBJECTS { fanAndPsMainFanStatus }
STATUS current
DESCRIPTION
"Generated when the main fan changes status."
::= { fanAndPsTrap 4 }
fanAndPsRedundantFanStatusTrap NOTIFICATION-TYPE
OBJECTS { fanAndPsRedundantFanStatus }
STATUS current
DESCRIPTION
"Generated when the redundant fan changes status."
::= { fanAndPsTrap 5 }
fanAndPsTemperatureStatusTrap NOTIFICATION-TYPE
OBJECTS { fanAndPsTemperatureStatus }
STATUS current
DESCRIPTION
"Generated when the temperature changes status."
::= { fanAndPsTrap 6 }
fanAndPsFanTrayPresentTrap NOTIFICATION-TYPE
OBJECTS { fanAndPsFanTrayPresent }
STATUS current
DESCRIPTION
"Generated when the fan tray presence status changes."
::= { fanAndPsTrap 7 }
fanAndPsFanTrayStatusTrap NOTIFICATION-TYPE
OBJECTS { fanAndPsFanTrayStatus }
STATUS current
DESCRIPTION
"Generated when the fan tray status changes."
::= { fanAndPsTrap 8 }
fanAndPsMainMonitoringStatusTrap NOTIFICATION-TYPE
OBJECTS { fanAndPsMainMonitoringStatus }
STATUS current
DESCRIPTION
"Generated when the main power supply monitoring status changes."
::= { fanAndPsTrap 9 }
fanAndPsAccelFanStatusTrap NOTIFICATION-TYPE
OBJECTS { fanAndPsAccelFanStatus }
STATUS current
DESCRIPTION
"Generated when the accelerator fans' status changes."
::= { fanAndPsTrap 10 }
-- router/switch restart related.
restartGroup OBJECT IDENTIFIER ::= { sysinfo 2 }
restart OBJECT-TYPE
SYNTAX INTEGER {
restartNone(0),
restartWarm(1),
restartCold(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A router/switch restart request.
A management station can remotely instruct an ATI router/switch
to action a warm or cold restart.
Once all the appropriate internal checks have been made, the
router/switch will acknowledge the request via normal SNMP channels.
The restart instruction will be actioned after waiting for a period
of 5 seconds, this is because the SNMP acknowledgement packet needs
time to reach the management station.
Once the request has been actioned, it can not be cancelled and
communication with the router/switch will be lost during system
initialisation."
::= { restartGroup 1 }
restartCause OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
hardwareReset(1),
hardwareWatchdog(2),
softwareRequest(3),
softwareException(4),
softwareInvalidImage(5),
softwareLicenceCheckFailure(6),
powerOnSelfTestfailure(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason for last time restart."
::= { restartGroup 2 }
restartLog OBJECT-TYPE
SYNTAX DisplayStringUnsized (SIZE (0..500))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The restart logging details."
::= { restartGroup 3 }
restartNotification NOTIFICATION-TYPE
OBJECTS { restartCause
}
STATUS current
DESCRIPTION
"A restart notification is a trap sent to tell snmp managers
the reason of restarting"
::= { restartGroup 11 }
-- cpu - this group contains information about the cpu utilisation over different
-- periods of time.
cpu OBJECT IDENTIFIER ::= { sysinfo 3 }
cpuUtilisationMax OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum CPU utilisation since the router was last restarted.
Expressed as a percentage."
::= { cpu 1 }
cpuUtilisationAvg OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average CPU utilisation since the router was last restarted.
Expressed as a percentage."
::= { cpu 2 }
cpuUtilisationAvgLastMinute OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average CPU utilisation over the past minute.
Expressed as a percentage."
::= { cpu 3 }
cpuUtilisationAvgLast10Seconds OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average CPU utilisation over the past ten seconds.
Expressed as a percentage."
::= { cpu 4 }
cpuUtilisationAvgLastSecond OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average CPU utilisation over the past second.
Expressed as a percentage."
::= { cpu 5 }
cpuUtilisationMaxLast5Minutes OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum CPU utilisation over the last 5 minutes.
Expressed as a percentage."
::= { cpu 6 }
cpuUtilisationAvgLast5Minutes OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average CPU utilisation over the past 5 minutes.
Expressed as a percentage."
::= { cpu 7 }
-- sysTemperature - this group contains information about the temperature monitoring
-- in the system. under this group is a general group, containing generic temperature
-- monitoring variables, and one or more specific groups, which contain variables specific
-- to particular products.
sysTemperature OBJECT IDENTIFIER ::= { sysinfo 4 }
-- This group displays generic system temperature information - the actual
-- temperature, the fixed temperature threshold and an indication the
-- temperature has fallen below the threshold. A particular product may support
-- this information or not. If not the product may have a specific entry for
-- its particular temperature information. A product may also support the
-- generic information and additional specific information.
generalTemperature OBJECT IDENTIFIER ::= { sysTemperature 1 }
generalTemperatureSupported OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
supported(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value supported indicates general temperature is displayed by the
device. The value notSupported indicates the device displays specific
temperature information or none at all."
::= { generalTemperature 1 }
generalTemperatureActualTemp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current temperature of product's base board, in degrees Celsius. A device
which doesn't support this group will return the value 0 for this variable."
::= { generalTemperature 2 }
generalTemperatureStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
notOk(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of temperature in this device. ok indicates the
temperature is below the threshold temperature or the device
is not capable of monitoring temperature. notOk indicates the
temperature is being monitored and is currently above the
threshold temperature (displayed in generalTemperatureThreshold)."
::= { generalTemperature 3 }
generalTemperatureThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The temperature threshold for the device. If the
temperature of the device rises above this threshold
generalTemeratureStatus will indicate a notOk status."
::= { generalTemperature 4 }
-- generalTemperature trap - a trap monitoring changes in the temperature status.
generalTemperatureTrap OBJECT IDENTIFIER ::= { generalTemperature 0 }
generalTemperatureStatusTrap NOTIFICATION-TYPE
OBJECTS { generalTemperatureStatus, generalTemperatureActualTemp, generalTemperatureThreshold }
STATUS current
DESCRIPTION
"Generated when the temperature status of the device changes."
::= { generalTemperatureTrap 1 }
-- sbTemperature - SwitchBlade specific temperature monitoring.
sbTemperature OBJECT IDENTIFIER ::= { sysTemperature 2 }
sbTempTable OBJECT-TYPE
SYNTAX SEQUENCE OF SbTempEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of SwitchBlade sysTemperature. Each entry in the table
represents temperature monitoring from one of the CPU cards which
may be present in the SwitchBlade system."
::= { sbTemperature 1 }
sbTempEntry OBJECT-TYPE
SYNTAX SbTempEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single entry of SwitchBlade sysTemperature"
INDEX { sbTempIndex }
::= { sbTempTable 1 }
SbTempEntry ::=
SEQUENCE {
sbTempIndex
INTEGER,
sbTempActualTemperature
INTEGER,
sbTempFixedThresholdStatus
INTEGER,
sbTempSettableThresholdStatus
INTEGER,
sbTempSettableThreshold
INTEGER
}
sbTempIndex OBJECT-TYPE
SYNTAX INTEGER {
master(1),
slave(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The board for which this temperature entry holds. If the system
consists only of a single CPU board, only one entry will appear
in the table, whose index is master(1)."
::= { sbTempEntry 1 }
sbTempActualTemperature OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual SwitchBlade temperature. This temperature is measured
within the SwitchBlade CPU, and is sampled at 1 second intervals."
::= { sbTempEntry 2 }
sbTempFixedThresholdStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
crossover(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature status with regard to the fixed temperature
threshold. The value of the fixed temperature threshold is set at
90 degrees C. This variable represents whether the actual temperature
is above the threshold (value is crossover(2)) or below the threshold
(value is normal(1)). If the temperature is exactly the same as the
fixed temperature threshold, the value of this variable reads as
normal(1)."
::= { sbTempEntry 3 }
sbTempSettableThresholdStatus OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
crossover(2),
undefined(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature status with regard to the settable temperature
threshold. The value of the settable temperature threshold is set by
management intervention. This variable represents whether the actual
temperature is above the threshold (value is crossover(2)) or below
the threshold (value is normal(1)). When the value of this variable is
undefined(3), no settable threshold has been specified and the value
of sbTempSettableThreshold is not used."
::= { sbTempEntry 4 }
sbTempSettableThreshold OBJECT-TYPE
SYNTAX INTEGER (30..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the settable temperature threshold. This can be set
independently for each temperature entry. The value of this threshold
is only valid when sbTempSettableThresholdStatus is not set to
undefined(3)."
::= { sbTempEntry 5 }
sbTempFixedThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the fixed temperature threshold. This value is fixed for
both CPU cards, and cannot be set."
::= { sbTemperature 2 }
sbTemperatureTrap OBJECT IDENTIFIER ::= { sbTemperature 0 }
sbTempFixedThresholdTrap NOTIFICATION-TYPE
OBJECTS { sbTempFixedThresholdStatus, sbTempActualTemperature, sbTempFixedThreshold }
STATUS current
DESCRIPTION
"Trap occurs when fixed threshold status changes. The actual temperature
and the fixed threshold are also given."
::= { sbTemperatureTrap 1 }
sbTempSettableThresholdTrap NOTIFICATION-TYPE
OBJECTS { sbTempSettableThresholdStatus, sbTempActualTemperature, sbTempSettableThreshold }
STATUS current
DESCRIPTION
"Trap occurs when settable threshold status changes. The actual temperature
and the settable threshold are also given."
::= { sbTemperatureTrap 2 }
atContactDetails OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contact details for Allied Telesis inc."
::= { sysinfo 5 }
-- acceleratorTemperature - Accelerator card specific temperature monitoring.
acceleratorTemperature OBJECT IDENTIFIER ::= { sysTemperature 3 }
acceleratorTemperatureTrap OBJECT IDENTIFIER ::= { acceleratorTemperature 0 }
acceleratorTemperatureSupported OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
supported(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value supported indicates whether accelerator card temperature
is displayed by the device. The value notSupported indicates the
device does not display specific accelerator card temperature
information."
::= { acceleratorTemperature 1 }
acceleratorTemperatureActualTemp OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current temperature of product's base board, in degrees Celsius. A device
which doesn't support this group will return the value 0 for this variable."
::= { acceleratorTemperature 2 }
acceleratorTemperatureStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
notOk(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of temperature in this device. ok indicates the
temperature is below the threshold temperature or the device
is not capable of monitoring temperature. notOk indicates the
temperature is being monitored and is currently above the
threshold temperature (displayed in generalTemperatureThreshold)."
::= { acceleratorTemperature 3 }
acceleratorTemperatureThreshold OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature threshold for the device. If the
temperature of the device rises above this threshold
generalTemeratureStatus will indicate a notOk status."
::= { acceleratorTemperature 4 }
-- acceleratorTemperature trap - a trap monitoring changes in the temperature status.
acceleratorTemperatureStatusTrap NOTIFICATION-TYPE
OBJECTS { acceleratorTemperatureStatus }
STATUS current
DESCRIPTION
"Generated when the temperature status of the device changes."
::= { acceleratorTemperatureTrap 1 }
-- bbrNvs - this group contains information about the battery backed RAM non-volatile storage
-- in the router.
bbrNvs OBJECT IDENTIFIER ::= { sysinfo 6 }
bbrNvsTrap OBJECT IDENTIFIER ::= { bbrNvs 0 }
bbrNvsReinitialiseTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"Generated at boot when the device detects that the BBR has been
corrupted and reinitialised. This can happen if the device's BBR
battery has run down, and the device has been powered off, then on."
::= { bbrNvsTrap 1}
-- memory - this group contains information about the current memory status
-- of the router.
memory OBJECT IDENTIFIER ::= { sysinfo 7 }
freeMemory OBJECT-TYPE
SYNTAX INTEGER (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Percentage of free memory still available on device"
::= { memory 1 }
totalBuffers OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of buffers available on device"
::= { memory 2 }
lowMemoryTrap NOTIFICATION-TYPE
OBJECTS { freeMemory, totalBuffers }
STATUS current
DESCRIPTION
"A low memory trap is generated when a router's memory
has gone below a certain level."
::= { memory 11 }
realTimeClockStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(0),
normal(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows the status of the real time clock"
::= { sysinfo 8 }
hostId OBJECT-TYPE
SYNTAX INTEGER (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Host Identifier of this device"
::= { sysinfo 9 }
atPortInfo OBJECT IDENTIFIER::= { sysinfo 14 }
atPortInfoTransceiverTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtPortInfoTransceiverEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information about the transceiver of a interface."
::= { atPortInfo 1 }
atPortInfoTransceiverEntry OBJECT-TYPE
SYNTAX AtPortInfoTransceiverEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The description, the transceiver type of a interface."
INDEX { atPortInfoTransceiverifIndex }
::= { atPortInfoTransceiverTable 1 }
AtPortInfoTransceiverEntry ::=
SEQUENCE {
atPortInfoTransceiverifIndex
InterfaceIndex,
atPortInfoTransceiverType
INTEGER
}
atPortInfoTransceiverifIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex for the interface represented
by this entry of the interfaces table."
::= { atPortInfoTransceiverEntry 1 }
atPortInfoTransceiverType OBJECT-TYPE
SYNTAX INTEGER {
rj45(1),
sfp-px(2),
sfp-bx10(3),
sfp-fx(4),
sfp-100base-lx(5),
sfp-t(6),
sfp-cx(7),
sfp-zx-cwdm(8),
sfp-lx(9),
sfp-sx(10),
sfp-oc3-lr(11),
sfp-oc3-ir(12),
sfp-oc3-mm(13),
xfp-srsw(14),
xfp-lrlw(15),
xfp-erew(16),
xfp-sr(17),
xfp-lr(18),
xfp-er(19),
xfp-lrm(20),
xfp-sw(21),
xfp-lw(22),
xfp-ew(23),
unknown(24),
empty(25)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the type of transceiver on a interface."
::= { atPortInfoTransceiverEntry 2 }
END
Reference in New Issue View Git Blame Copy Permalink