mirror of
https://github.com/librenms/librenms.git
synced 2024-10-07 16:52:45 +00:00
7445a736a6
git-svn-id: http://www.observium.org/svn/observer/trunk@1576 61d68cd4-352d-0410-923a-c4978735b2b8
448 lines
16 KiB
Plaintext
448 lines
16 KiB
Plaintext
|
|
BAY-STACK-ADAC-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Integer32
|
|
FROM SNMPv2-SMI
|
|
TruthValue, MacAddress, RowStatus
|
|
FROM SNMPv2-TC
|
|
InterfaceIndex, InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
bayStackMibs
|
|
FROM SYNOPTICS-ROOT-MIB;
|
|
|
|
bayStackAdacMib MODULE-IDENTITY
|
|
LAST-UPDATED "200610160000Z"
|
|
ORGANIZATION "Nortel Networks"
|
|
CONTACT-INFO "Nortel Networks"
|
|
DESCRIPTION
|
|
"Nortel Networks Auto-Discovery/Auto-Configuration of Nortel IP
|
|
Phones MIB
|
|
|
|
Copyright 2004 Nortel Networks, Inc.
|
|
All rights reserved.
|
|
This Nortel Networks SNMP Management Information Base
|
|
Specification embodies Nortel Networks' confidential and
|
|
proprietary intellectual property. Nortel Networks retains
|
|
all title and ownership in the Specification, including any
|
|
revisions.
|
|
|
|
This Specification is supplied 'AS IS,' and Nortel Networks
|
|
makes no warranty, either express or implied, as to the use,
|
|
operation, condition, or performance of the Specification."
|
|
|
|
REVISION "200610160000Z" -- 16 October 2006
|
|
DESCRIPTION "v5: Added bsAdacPortOperEnable, bsAdacPortMacDetectionEnable,
|
|
bsAdacPortLldpDetectionEnable, bsAdacPortOperDisabledNotification"
|
|
|
|
REVISION "200605240000Z" -- 24 May 2006
|
|
DESCRIPTION "v4: Removed untagAll enumeration."
|
|
|
|
REVISION "200603130000Z" -- 13 March 2006
|
|
DESCRIPTION "v3: Added bsAdacOperEnable, bsAdacPortTaggedFramesPvid,
|
|
bsAdacPortTaggedFramesTagging and bsAdacPortType"
|
|
|
|
REVISION "200504120000Z" -- 12 April 2005
|
|
DESCRIPTION "v2: Added support for MAC Address Ranges"
|
|
|
|
REVISION "200412130000Z" -- 13 December 2004
|
|
DESCRIPTION "v1: Initial version."
|
|
|
|
::= { bayStackMibs 9 }
|
|
|
|
bsAdacNotifications OBJECT IDENTIFIER ::= { bayStackAdacMib 0 }
|
|
bsAdacObjects OBJECT IDENTIFIER ::= { bayStackAdacMib 1 }
|
|
|
|
|
|
--
|
|
-- ADAC Scalar Objects
|
|
--
|
|
|
|
bsAdacScalars OBJECT IDENTIFIER ::= { bsAdacObjects 1 }
|
|
|
|
bsAdacAdminEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to administratively enable or disable ADAC.
|
|
A value of true(1) means ADAC should be enabled, while a value
|
|
of false(2) means ADAC should be disabled. Note that ADAC might
|
|
remain operationally disabled due to other conditions (such as
|
|
missing Uplink and Call Server ports). To determine whether
|
|
ADAC is operationally enabled, see bsAdacOperEnable."
|
|
::= { bsAdacScalars 2 }
|
|
|
|
bsAdacOperatingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
untaggedFramesBasic(1),
|
|
untaggedFramesAdvanced(2),
|
|
taggedFrames(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This operating mode must be set depending on how the
|
|
IP Phones are configured to send frames (tagged/untagged)
|
|
and on the desired level of complexity for auto-configuration.
|
|
|
|
A value of untaggedFramesBasic(1) means that the IP Phones are
|
|
configured to send untagged frames and no Voice-VLAN will be
|
|
created (only apply QoS).
|
|
|
|
A value of untaggedFramesAdvanced(2) means that the IP Phones are
|
|
configured to send untagged frames and the Voice-VLAN will be
|
|
created too, beside applying QoS.
|
|
|
|
A value of taggedFrames(3) means that the IP Phones are
|
|
configured to send tagged frames; the Voice-VLAN will be
|
|
created and QoS will be applied accordingly.
|
|
|
|
This object cannot take the value untaggedFramesAdvanced(2) or
|
|
taggedFrames(3) if bsAdacVoiceVlan has the value 0, or if both
|
|
bsAdacCallServerPort and bsAdacUplinkPort have the value 0."
|
|
::= { bsAdacScalars 3 }
|
|
|
|
bsAdacCallServerPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port on which the Call Server is connected. This value
|
|
is used only when the current operating mode is either
|
|
untaggedFramesAdvanced(2) or taggedFrames(3). It may not
|
|
be changed to 0 if the current operating mode is one of
|
|
these values."
|
|
::= { bsAdacScalars 4 }
|
|
|
|
bsAdacUplinkPort OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The uplink port is used usually when the Call Server is not
|
|
connected directly to the current module/stack. This value
|
|
is used only when the current operating mode is either
|
|
untaggedFramesAdvanced(2) or taggedFrames(3). It may not
|
|
be changed to 0 if the current operating mode is one of
|
|
these values."
|
|
::= { bsAdacScalars 5 }
|
|
|
|
bsAdacVoiceVlan OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that uniquely identifies the Voice Virtual LAN associated
|
|
with ADAC. This value it is used only when the current operating
|
|
mode is untaggedFramesAdvanced(2) or taggedFrames(3). It may not
|
|
be changed to 0 if the current operating mode is one of these
|
|
values."
|
|
::= { bsAdacScalars 6 }
|
|
|
|
bsAdacNotificationControlEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object controls whether port status changes will result in
|
|
generation of a bsAdacPortConfigNotification. The value true(1)
|
|
means that the notifications will be generated. The value false(2)
|
|
means that they will not be generated."
|
|
::= { bsAdacScalars 7 }
|
|
|
|
bsAdacMacAddrRangeControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
clearTable(2),
|
|
defaultTable(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object always returns none(1) when retrieved. When set to
|
|
clearTable(2), it will delete all entries from the bsAdacMacAddrRangeTable.
|
|
When set to defaultTable(3), it will delete all entries from the
|
|
bsAdacMacAddrRangeTable and replace them with factory default entries."
|
|
::= { bsAdacScalars 8 }
|
|
|
|
bsAdacOperEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether ADAC is operationally enabled. A value of
|
|
true(1) indicates that it is enabled, while a value of false(2) indicates
|
|
that it is disabled. Note a value of false(2) for this object and a value
|
|
of true(1) for bsAdacAdminEnable indicates that ADAC is not operational
|
|
due to some condition such as missing Uplink and Call Server ports."
|
|
::= { bsAdacScalars 9 }
|
|
|
|
--
|
|
-- ADAC Port Table
|
|
--
|
|
|
|
bsAdacPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsAdacPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of objects that display and control the port
|
|
attributes of ADAC."
|
|
::= { bsAdacObjects 2 }
|
|
|
|
bsAdacPortEntry OBJECT-TYPE
|
|
SYNTAX BsAdacPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects that display and control the port
|
|
attributes of ADAC."
|
|
INDEX { bsAdacPortIndex }
|
|
::= { bsAdacPortTable 1 }
|
|
|
|
BsAdacPortEntry ::=
|
|
SEQUENCE {
|
|
bsAdacPortIndex InterfaceIndex,
|
|
bsAdacPortAdminEnable TruthValue,
|
|
bsAdacPortConfigStatus INTEGER,
|
|
bsAdacPortTaggedFramesPvid Integer32,
|
|
bsAdacPortTaggedFramesTagging INTEGER,
|
|
bsAdacPortType INTEGER,
|
|
bsAdacPortOperEnable TruthValue,
|
|
bsAdacPortMacDetectionEnable TruthValue,
|
|
bsAdacPortLldpDetectionEnable TruthValue
|
|
}
|
|
|
|
bsAdacPortIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An index value that uniquely identifies a port.
|
|
This value is similar to ifIndex in MIB2."
|
|
::= { bsAdacPortEntry 1 }
|
|
|
|
bsAdacPortAdminEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"true (1) Auto-Detection (and implicitly Auto-Configuration)
|
|
of Nortel IP Phones is enabled on this interface.
|
|
false (2) Auto-Detection (and implicitly Auto-Configuration)
|
|
of Nortel IP Phones is disabled on this interface."
|
|
::= { bsAdacPortEntry 2 }
|
|
|
|
bsAdacPortConfigStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
configApplied(1),
|
|
configNotApplied(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes the Auto-Configuration status for the port.
|
|
A value of configApplied(1) means that the ADAC configuration
|
|
is applied for this port.
|
|
A value of configNotApplied(2) means that the ADAC configuration
|
|
is not applied for this port."
|
|
::= { bsAdacPortEntry 3 }
|
|
|
|
bsAdacPortTaggedFramesPvid OBJECT-TYPE
|
|
SYNTAX Integer32 (0..4094)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the PVID value that Auto-Configuration will try to apply for
|
|
ports which have Auto-Detection enabled (bsAdacPortAdminEnable is set
|
|
to true(1)), and which are running in Tagged-Frames operational mode
|
|
(bsAdacOperatingMode is set to taggedFrames(3)).
|
|
|
|
A value of 0 means that the Auto-Configuration will not change the
|
|
PVID of the respective port.
|
|
|
|
If the VLAN with the ID equal with this PVID does not exist when
|
|
Auto-Configuration is applied to a port, then Auto-Configuration won't
|
|
change the port's PVID (it will ignore the current value of this object,
|
|
and treat it as if its value is currently 0)."
|
|
::= { bsAdacPortEntry 4 }
|
|
|
|
bsAdacPortTaggedFramesTagging OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tagAll(1),
|
|
tagPvidOnly(2),
|
|
untagPvidOnly(3),
|
|
noChange(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the tagging value that Auto-Configuration will apply for
|
|
ports which have Auto-Detection enabled (bsAdacPortAdminEnable is
|
|
set to true(1)), and which are running in Tagged-Frames operational
|
|
mode (bsAdacOperatingMode is set to taggedFrames(3)).
|
|
|
|
A value of tagAll(1) means that the Telephony ports will have
|
|
the tagging enabled on all frames.
|
|
|
|
A value of tagPvidOnly(2) means that the Telephony ports will have
|
|
the tagging enabled on frames matching the PVID of the port.
|
|
|
|
A value of untagPvidOnly(3) means that the Telephony ports will have
|
|
the tagging disabled on frames matching the PVID of the port.
|
|
|
|
A value of noChange(4) means that the Auto-Configuration will not
|
|
change the tagging of the respective port."
|
|
::= { bsAdacPortEntry 5 }
|
|
|
|
bsAdacPortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
telephony(1),
|
|
callServer(2),
|
|
uplink(3),
|
|
other(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Describes how ADAC classifies this port.
|
|
|
|
A value of telephony(1) means that the Auto-Detection is enabled
|
|
for this port (bsAdacPortAdminEnable is set to true(1)).
|
|
|
|
A value of callServer(2) means that the port is configured as Call Server.
|
|
|
|
A value of uplink(3) means that the port is either configured as Uplink
|
|
or it's part of the same trunk as the current set Uplink port.
|
|
|
|
A value of other(4) means that the port has none of the types above."
|
|
::= { bsAdacPortEntry 6 }
|
|
|
|
bsAdacPortOperEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether Auto-Detection is operationally enabled on port.
|
|
A value of true(1) indicates that it is enabled, while a value of false(2)
|
|
indicates that it is disabled.
|
|
|
|
Note a value of false(2) for this object and a value of true(1) for
|
|
bsAdacPortAdminEnable indicates that Auto-Detection (and implicitly
|
|
Auto-Configuration) is not operational due to some condition such as
|
|
reaching the maximum number of devices supported per port."
|
|
::= { bsAdacPortEntry 7 }
|
|
|
|
bsAdacPortMacDetectionEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"true (1) Auto-Detection of Nortel IP Phones based on MAC Address
|
|
is enabled on this interface.
|
|
|
|
false (2) Auto-Detection of Nortel IP Phones based on MAC Address
|
|
is disabled on this interface.
|
|
|
|
It cannot be set to false(2) if no other supported detection
|
|
mechanism is enabled on port."
|
|
::= { bsAdacPortEntry 8 }
|
|
|
|
bsAdacPortLldpDetectionEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"true (1) Auto-Detection of Nortel IP Phones based on 802.1ab
|
|
is enabled on this interface.
|
|
|
|
false (2) Auto-Detection of Nortel IP Phones based on 802.1ab
|
|
is disabled on this interface.
|
|
|
|
It cannot be set to false(2) if no other supported detection
|
|
mechanism is enabled on port."
|
|
::= { bsAdacPortEntry 9 }
|
|
|
|
--
|
|
-- ADAC MAC Address Range Table
|
|
--
|
|
|
|
bsAdacMacAddrRangeTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsAdacMacAddrRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of objects that display and control the attributes of
|
|
the MAC Address ranges supported by ADAC.
|
|
Overlapping ranges are not allowed and the attempts to create an
|
|
entry that overlaps an existing entry will fail."
|
|
::= { bsAdacObjects 3 }
|
|
|
|
bsAdacMacAddrRangeEntry OBJECT-TYPE
|
|
SYNTAX BsAdacMacAddrRangeEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A set of objects that display and control the attributes of
|
|
the MAC Address ranges supported by ADAC."
|
|
INDEX { bsAdacMacAddrRangeLowEndIndex, bsAdacMacAddrRangeHighEndIndex }
|
|
::= { bsAdacMacAddrRangeTable 1 }
|
|
|
|
BsAdacMacAddrRangeEntry ::=
|
|
SEQUENCE {
|
|
bsAdacMacAddrRangeLowEndIndex MacAddress,
|
|
bsAdacMacAddrRangeHighEndIndex MacAddress,
|
|
bsAdacMacAddrRangeRowStatus RowStatus
|
|
}
|
|
|
|
bsAdacMacAddrRangeLowEndIndex OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The low end of the MAC Address range."
|
|
::= { bsAdacMacAddrRangeEntry 1 }
|
|
|
|
bsAdacMacAddrRangeHighEndIndex OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The high end of the MAC Address range."
|
|
::= { bsAdacMacAddrRangeEntry 2 }
|
|
|
|
bsAdacMacAddrRangeRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is used to control creation/deletion of entries
|
|
in this table."
|
|
::= { bsAdacMacAddrRangeEntry 3 }
|
|
|
|
--
|
|
-- ADAC Notifications Section
|
|
--
|
|
|
|
bsAdacPortConfigNotification NOTIFICATION-TYPE
|
|
OBJECTS { bsAdacPortConfigStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates if the Auto-Configuration
|
|
is applied or not on the port. It will be sent on
|
|
every status change."
|
|
::= { bsAdacNotifications 1 }
|
|
|
|
bsAdacPortOperDisabledNotification NOTIFICATION-TYPE
|
|
OBJECTS { bsAdacPortOperEnable }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification indicates if a port having bsAdacPortAdminEnable set
|
|
to true(1) changes its bsAdacPortOperEnable from true(1) to false(2) due
|
|
to some condition such as reaching the maximum number of devices supported
|
|
per port."
|
|
::= { bsAdacNotifications 2 }
|
|
|
|
END
|