mirror of
https://github.com/librenms/librenms.git
synced 2024-10-07 16:52:45 +00:00
6b9d05653c
git-svn-id: http://www.observium.org/svn/observer/trunk@1569 61d68cd4-352d-0410-923a-c4978735b2b8
1161 lines
43 KiB
Plaintext
1161 lines
43 KiB
Plaintext
ENTERASYS-PWA-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- enterasys-pwa-mib.txt
|
|
--
|
|
-- Part Number:
|
|
--
|
|
--
|
|
|
|
-- This module provides authoritative definitions for Enterasys
|
|
-- Networks' Port Web Authentication MIB.
|
|
|
|
--
|
|
-- This module will be extended, as needed.
|
|
|
|
-- Enterasys Networks reserves the right to make changes in
|
|
-- specification and other information contained in this document
|
|
-- without prior notice. The reader should consult Enterasys Networks
|
|
-- to determine whether any such changes have been made.
|
|
--
|
|
-- In no event shall Enterasys Networks be liable for any incidental,
|
|
-- indirect, special, or consequential damages whatsoever (including
|
|
-- but not limited to lost profits) arising out of or related to this
|
|
-- document or the information contained in it, even if Enterasys
|
|
-- Networks has been advised of, known, or should have known, the
|
|
-- possibility of such damages.
|
|
--
|
|
-- Enterasys Networks grants vendors, end-users, and other interested
|
|
-- parties a non-exclusive license to use this Specification in
|
|
-- connection with the management of Enterasys Networks products.
|
|
|
|
-- Copyright February, 2001-2003 Enterasys Networks, Inc.
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, Integer32,
|
|
IpAddress
|
|
FROM SNMPv2-SMI
|
|
TruthValue, TimeStamp, TimeInterval, MacAddress, DisplayString
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
ZeroBasedCounter32
|
|
FROM RMON2-MIB
|
|
InterfaceIndex
|
|
FROM IF-MIB
|
|
EnabledStatus
|
|
FROM P-BRIDGE-MIB
|
|
InetAddressType, InetAddress
|
|
FROM INET-ADDRESS-MIB
|
|
etsysModules
|
|
FROM ENTERASYS-MIB-NAMES;
|
|
|
|
etsysPwaMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200311051656Z" -- Wed Nov 5 16:56 GMT 2003
|
|
ORGANIZATION "Enterasys Networks, Inc"
|
|
CONTACT-INFO
|
|
"Postal: Enterasys Networks
|
|
50 Minuteman Rd.
|
|
Andover, MA 01810-1008
|
|
USA
|
|
Phone: +1 978 684 1000
|
|
E-mail: support@enterasys.com
|
|
WWW: http://www.enterasys.com"
|
|
|
|
DESCRIPTION
|
|
"This MIB module provides the ability to configure the
|
|
Port Web Authentication (PWA) component in a switch.
|
|
PWA provides a way of authenticating a user on a
|
|
switch port before allowing the user general access
|
|
to the network. Only the essential protocols and
|
|
services required by the authentication process
|
|
are allowed on the segment between the end-station
|
|
and the switch port. All other traffic will be
|
|
discarded. When a user is in the unauthenticated
|
|
state, any traffic generated by the end-station
|
|
will not go beyond the switch port that they are
|
|
connected to.
|
|
|
|
The PWA/login process from the user standpoint is
|
|
simple. The user makes a request via their favorite
|
|
web browser for the 'secureharbour' web page. Depending
|
|
upon the authenticated state of the port, a login page
|
|
is provided so that the user can enter their username
|
|
and password, or a logout page is presented to the user.
|
|
When they submit their login page, the switch will then
|
|
authenticate them via a preconfigured radius server.
|
|
If the login is successful, then the port that the
|
|
end-station is connected to will be turned on and
|
|
full network access will be granted according to the
|
|
users port configuration on the switch.
|
|
|
|
This MIB module also provides status about the PWA
|
|
component and statistics about all current users who
|
|
are logged into the switch."
|
|
|
|
REVISION "200311051656Z" -- Wed Nov 5 16:56 GMT 2003
|
|
DESCRIPTION
|
|
"Added the etsysPwaSystemEnhancedModeRefreshTime object."
|
|
|
|
REVISION "200308041122Z" -- Mon Aug 4 11:22 GMT 2003
|
|
DESCRIPTION
|
|
"Added objects to support Guest Networking."
|
|
|
|
REVISION "200305141932Z" -- Wed May 14 19:32 GMT 2003
|
|
DESCRIPTION
|
|
"Added the etsysPwaLogoDisplayStatus object."
|
|
|
|
REVISION "200212132156Z" -- Fri Dec 13 21:56 GMT 2002
|
|
DESCRIPTION
|
|
"Added the etsysPwaSystemAuthEnhancedMode object.
|
|
Updated the CONTACT-INFO clause."
|
|
|
|
REVISION "200205152044Z" -- Wed May 15 20:44 GMT 2002
|
|
DESCRIPTION
|
|
"Changed the syntax of etsysPwaAuthQuietPeriod and
|
|
etsysPwaAuthMaxReq to Integer32. Corrected the
|
|
conformance section to reflect the changes that were
|
|
made yesterday."
|
|
|
|
REVISION "200205142130Z" -- Tue May 14 21:30 GMT 2002
|
|
DESCRIPTION
|
|
"Changed the syntax of etsysPwaSystemAuthIPAddress
|
|
from InetAddress to IpAddress, to match existing and
|
|
shipping implementations, and deprecated it as well.
|
|
Deprecated etsysPwaSystemAuthIPAddressType.
|
|
Added the etsysPwaSystemAuthInetAddressType and
|
|
etsysPwaSystemAuthInetAddress objects to replace the
|
|
deprecated functionality. Updated the CONTACT-INFO."
|
|
|
|
REVISION "200203212149Z" -- Thu Mar 21 21:49 GMT 2002
|
|
DESCRIPTION
|
|
"Changed the definition of etsysPwaSystemAuthHostName
|
|
from OCTET-STRING to DisplayString."
|
|
|
|
REVISION "200106071600Z"
|
|
DESCRIPTION
|
|
"The initial version of this MIB module"
|
|
::= { etsysModules 8 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- MIB Objects
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysPwaSystem OBJECT IDENTIFIER ::= { etsysPwaMIB 1 }
|
|
etsysPwaPortConfiguration OBJECT IDENTIFIER ::= { etsysPwaMIB 2 }
|
|
etsysPwaPortStatus OBJECT IDENTIFIER ::= { etsysPwaMIB 3 }
|
|
etsysPwaSession OBJECT IDENTIFIER ::= { etsysPwaMIB 4 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The PWA System Group
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysPwaSystemAuthControl OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The administrative enable/disable state for Port Web
|
|
Authentication Control in a System. Enabling this object
|
|
turns on the PWA system."
|
|
REFERENCE "Port Web Authentication Architectural Specification"
|
|
DEFVAL { disabled }
|
|
::= { etsysPwaSystem 1 }
|
|
|
|
etsysPwaSystemAuthHostName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the hostname part the Uniform Resource Locator
|
|
(URL). This object is a DNS/WINS name and is considered
|
|
to be bound to the etsysPwaSystemAuthIPAddress.
|
|
This object must not contain the protocol portion of the URL
|
|
nor any directory or filenames. Changing this objects value
|
|
changes the default name of the http server located at the
|
|
local switch. An administrator can change this objects value
|
|
to whatever name is appropriate for their network."
|
|
DEFVAL { "secureharbour" }
|
|
::= { etsysPwaSystem 2 }
|
|
|
|
etsysPwaSystemAuthBanner OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The banner that will be displayed on the web login page
|
|
of the Port Web Authentication Control in a System. This
|
|
banner is a courtesy introduction to the network, which
|
|
the user sees on the login page."
|
|
DEFVAL { "Enterasys Networks Incorporated
|
|
P.O. Box 5005
|
|
Rochester, NH 03866-5005 USA
|
|
603 337-9400" }
|
|
::= { etsysPwaSystem 3 }
|
|
|
|
etsysPwaSystemPwaNameServicesEnable OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enable state of the name services application.
|
|
Enabling this object turns on the Domain Name Service
|
|
(DNS) and the Windows Internet Naming Services (WINS)
|
|
clients. These clients will resolve only requests for
|
|
the etsysPwaSystemAuthHostName. Disabling this object
|
|
would require users in the network to know and use the
|
|
etsysPwaSystemAuthIPAddress of this system."
|
|
DEFVAL { disabled }
|
|
::= { etsysPwaSystem 4 }
|
|
|
|
etsysPwaSystemAuthIPAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object has been deprecated. Refer to
|
|
etsysPwaSystemAuthIPAddress for the reason.
|
|
The textual convention for InetAddressType
|
|
states that this object must be registered
|
|
immediately before the InetAddress that it
|
|
defines. etsysPwaSystemAuthInetAddressType
|
|
MUST be used for all future implementations
|
|
of this MIB."
|
|
::= { etsysPwaSystem 5 }
|
|
|
|
etsysPwaSystemAuthIPAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object has been deprecated due to an incorrect
|
|
initial implementation of this MIB. This object was
|
|
originally an InetAddress but some versions of the E7
|
|
firmware implemented it as an IpAddress. The syntax
|
|
of this object was changed to allow management of the
|
|
existing products. The etsysPwaSystemAuthInetAddress
|
|
object MUST be used for all future implementations of
|
|
this MIB."
|
|
::= { etsysPwaSystem 6 }
|
|
|
|
etsysPwaSystemAuthProtocol OBJECT-TYPE
|
|
SYNTAX INTEGER { chap(1), pap(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication protocol used for this switch module.
|
|
When set to a chap(1), the authentication scheme used will
|
|
be the 'PPP Challenge Handshake Authentication Protocol
|
|
(CHAP)', when set to a pap(2), the scheme will be
|
|
'Password Authentication Protocol (PAP)'.
|
|
|
|
When using the CHAP protocol, the username and password
|
|
utilize the CHAP protocol method of encryption to encrypt
|
|
the users password in the http transmission of the submitted
|
|
form on the segment between the end-station and the
|
|
switch port.
|
|
|
|
The PAP protocol is less secure than CHAP and does not
|
|
provide any encryption on the segment between the
|
|
end-station the switch port. The username and password
|
|
go over this segment in the http transmission of the
|
|
submitted form in plain text format."
|
|
DEFVAL { pap }
|
|
::= { etsysPwaSystem 7 }
|
|
|
|
etsysPwaSystemAuthDomain OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The domain name for which this module resides in."
|
|
::= { etsysPwaSystem 8 }
|
|
|
|
etsysPwaSystemAuthInetAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that represents a type of
|
|
etsysPwaSystemAuthInetAddress.
|
|
|
|
unknown(0) An unknown address type. This value MUST
|
|
be used if the value of the corresponding
|
|
InetAddress object is a zero-length string.
|
|
It may also be used to indicate an IP address
|
|
which is not in one of the formats defined
|
|
below.
|
|
|
|
ipv4(1) An IPv4 address as defined by the
|
|
InetAddressIPv4 textual convention.
|
|
|
|
ipv6(2) An IPv6 address as defined by the
|
|
InetAddressIPv6 textual convention."
|
|
::= { etsysPwaSystem 9 }
|
|
|
|
etsysPwaSystemAuthInetAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address bound to the etsysPwaSystemAuthHostName.
|
|
The format of this object is defined in the
|
|
etsysPwaSystemAuthInetAddressType object. This address
|
|
MUST be supplied for authentication to work. This is a
|
|
globally unique address and must be the same value
|
|
configured into every authenticating switch in the domain.
|
|
Each switch terminates any IP traffic destined to this
|
|
etsysPwaSystemAuthInetAddress. If the port is in either
|
|
promiscousAuto(4) or auto(2) mode, described in the
|
|
etsysPwaControlledPortControl object, then the local
|
|
switch in question responds to http requests with a login
|
|
page. If the port is in any other mode, then all traffic
|
|
destined for etsysPwaSystemAuthInetAddress is discarded.
|
|
Please note that neither the etsysPwaSystemAuthHostName
|
|
object nor this object refer to any specific machine
|
|
in the network. These objects are always relative to the
|
|
connection between an end station and a switch. Traffic
|
|
destined for this IP is never seen over interswitch links."
|
|
::= { etsysPwaSystem 10 }
|
|
|
|
etsysPwaSystemAuthEnhancedMode OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The enable state of the PWA enhanced mode. When this
|
|
feature is enabled users on unauthenticated ports will
|
|
be presented the login page on their initial web access.
|
|
The etsysPwaControlledPortControl object MUST be set to
|
|
auto(2) for this feature to function correctly.
|
|
If etsysPwaControlledPortControl is not set to auto(2),
|
|
or if this feature is disabled, users must enter the
|
|
value of etsysPwaSystemAuthHostName in order to get the
|
|
login page."
|
|
DEFVAL { disabled }
|
|
::= { etsysPwaSystem 11 }
|
|
|
|
etsysPwaLogoDisplayStatus OBJECT-TYPE
|
|
SYNTAX EnabledStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this object is set to enabled, the secureharbour
|
|
logo will be displayed on the PWA login web pages.
|
|
When it is set to disabled, the logo will not be displayed."
|
|
DEFVAL { enabled }
|
|
::= { etsysPwaSystem 12 }
|
|
|
|
etsysPwaSystemGuestUsername OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The username that the Guest Networking feature will use to
|
|
authenticate users that do not override this value in the
|
|
login page."
|
|
DEFVAL { "guest" }
|
|
::= { etsysPwaSystem 13 }
|
|
|
|
etsysPwaSystemGuestPassword OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The password that the Guest Networking feature will use to
|
|
authenticate users that do not override the guest username.
|
|
On a read this object will always return an empty string."
|
|
DEFVAL { "" }
|
|
::= { etsysPwaSystem 14 }
|
|
|
|
etsysPwaSystemGuestPasswordValid OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"true(1) - indicates that etsysPwaGuestPassword was last set
|
|
with some value other than the empty string.
|
|
|
|
false(2) - indicates that etsysPwaGuestPassword has never
|
|
been set, or was last set to the empty string."
|
|
DEFVAL { false }
|
|
::= { etsysPwaSystem 15 }
|
|
|
|
|
|
etsysPwaSystemGuestNetworkingStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { disabled(1),
|
|
authNone(2),
|
|
authRadius(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Guest Networking is a feature that allows a user to get default
|
|
policy access to the network without having to know a username
|
|
or password. When this feature is not disabled(1), the username
|
|
on the login page will be populated with the value from the
|
|
object etsysPwaGuestUsername and the password will be mask out
|
|
with asterisks. The password in the login page should never be
|
|
populated with the value from etsysPwaGuestPassword. When Guest
|
|
Networking is enabled, and a user submits a request for
|
|
authentication, and the username is the same as the value from
|
|
etsysPwaGuestUsername, PWA will use the value from
|
|
etsysPwaGuestPassword as the password for authentication.
|
|
|
|
When this object is set to disabled(1), Guest Networking will
|
|
be unavailable.
|
|
|
|
When set to authNone(2) Guest Networking will be enabled and
|
|
it will not authenticate the guest user using any authentication
|
|
method. Once the user submits the login page with the username
|
|
that matches the value from etsysPwaGuestUsername, the default
|
|
policy of that port will become the active policy.
|
|
|
|
When set to authRadius(3) Guest Networking will be enabled and
|
|
it will authenticate the guest user using RADIUS authentication
|
|
Upon a successful authentication from RADIUS, this port will
|
|
apply the policy returned from RADIUS to that port."
|
|
DEFVAL { disabled }
|
|
::= { etsysPwaSystem 16 }
|
|
|
|
etsysPwaSystemEnhancedModeRefreshTime OBJECT-TYPE
|
|
SYNTAX Integer32 (0..120)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the value that is displayed on the PWA login success
|
|
page as the redirect time.
|
|
|
|
If a user, using PWA enhanced mode, enters a URL of
|
|
'http://enterasys.com' prior to being presented with the PWA
|
|
login page and then successfully authenticates into the network
|
|
they would be presented with a login success page that displays
|
|
'Welcome to the Network. Completing network connections.
|
|
You will be redirected to http://enterasys.com in
|
|
approximately 30 seconds'.
|
|
|
|
An end-station that is utilizing the Dynamic Host Configuration
|
|
Protocol (DHCP) as a means of obtaining an IP address will take
|
|
some time to transition from the temporary IP address issued by
|
|
PWA, as part of the authentication process, to the official IP
|
|
address issued by the network.
|
|
|
|
etsysPwaSystemEnhancedModeRefreshTime provides a configurable
|
|
time period for the end-stations on a given switch to complete
|
|
the process of obtaining their official IP addresses and to
|
|
begin using them. The default value of 30 seconds has been
|
|
shown to be adequate in most environments. In some networks
|
|
this time period may need to be longer, and in other networks
|
|
it could be shorter.
|
|
|
|
In networks that only use static IP addresses a time period on
|
|
the order of 5 to 10 seconds may be sufficient. A period of
|
|
less than 5 seconds is not recommended as there is a slight
|
|
delay after a successful login before the switch transitions
|
|
the port to forwarding."
|
|
DEFVAL { 30 }
|
|
::= { etsysPwaSystem 17 }
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The PWA Port Configuration Table
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysPwaPortConfigurationTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysPwaPortConfigurationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table of configuration objects for each port that are
|
|
supported by the Port Web Authentication Entity. An entry
|
|
appears in this table for each port in this system. All
|
|
objects/instances in this table are stored persistent
|
|
memory."
|
|
::= { etsysPwaPortConfiguration 1 }
|
|
|
|
etsysPwaPortConfigurationEntry OBJECT-TYPE
|
|
SYNTAX EtsysPwaPortConfigurationEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex number, maximum number of requests, quiet
|
|
period between failed attempts, and initialization control
|
|
for a Port. This table holds the objects for configuring
|
|
the PWA system."
|
|
INDEX { etsysPwaPortNumber }
|
|
::= { etsysPwaPortConfigurationTable 1 }
|
|
|
|
EtsysPwaPortConfigurationEntry ::=
|
|
SEQUENCE {
|
|
etsysPwaPortNumber
|
|
InterfaceIndex,
|
|
etsysPwaInitializePort
|
|
TruthValue,
|
|
etsysPwaAuthQuietPeriod
|
|
Integer32,
|
|
etsysPwaAuthMaxReq
|
|
Integer32,
|
|
etsysPwaControlledPortControl
|
|
INTEGER
|
|
}
|
|
|
|
etsysPwaPortNumber OBJECT-TYPE
|
|
SYNTAX InterfaceIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifIndex number associated with this port."
|
|
::= { etsysPwaPortConfigurationEntry 1 }
|
|
|
|
etsysPwaInitializePort OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The initialization control for this ifIndex. This object
|
|
can be used to unauthenticate a user on a port or to return
|
|
the port to its initial default state due to some unknown
|
|
condition. Setting this attribute to true(1) causes the
|
|
Port to be initialized. The attribute value reverts to
|
|
false(2) once initialization has completed. Initializing a
|
|
port returns the etsysPwaAuthPwaState to disconnected(1)
|
|
and if the etsysPwaControlledPortControl setting is either
|
|
promiscousAuto(4) or auto(2), and the etsysPwaAuthPwaState
|
|
was authenticated(3), then the current session is terminated,
|
|
and the user is forced off the network."
|
|
::= { etsysPwaPortConfigurationEntry 2 }
|
|
|
|
etsysPwaAuthQuietPeriod OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value, in seconds, of the quietPeriod constant
|
|
currently in use by the Port Web Authenticator state
|
|
machine. After the user attempts unsuccessfully to login
|
|
a number of times equal to the etsysPwaAuthMaxReq constant,
|
|
then the ifIndex is locked for a time period equal to the
|
|
value of this MIB entry.
|
|
|
|
In the initial released version of this MIB this object
|
|
was an Unsigned32. The initial implementation on the E7
|
|
returned an Integer32. The syntax of this object was
|
|
changed to reflect the existing product in the field.
|
|
All future implementations of this object should return
|
|
an Integer32."
|
|
DEFVAL { 60 }
|
|
::= { etsysPwaPortConfigurationEntry 3 }
|
|
|
|
etsysPwaAuthMaxReq OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the maxReq constant currently in use by the
|
|
Port Web Authenticator state machine. This represents the
|
|
maximum number of failed retry attempts before preventing
|
|
any further attempts for a time period equal to the value
|
|
of etsysPwaAuthQuietPeriod.
|
|
|
|
In the initial released version of this MIB this object
|
|
was an Unsigned32. The initial implementation on the E7
|
|
returned an Integer32. The syntax of this object was
|
|
changed to reflect the existing product in the field.
|
|
All future implementations of this object should return
|
|
an Integer32."
|
|
DEFVAL { 2 }
|
|
::= { etsysPwaPortConfigurationEntry 4 }
|
|
|
|
etsysPwaControlledPortControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
forceUnauthorized(1),
|
|
auto(2),
|
|
forceAuthorized(3),
|
|
promiscousAuto(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The authentication method of the ifIndex.
|
|
A value of forceUnauthorized(1) indicates that the
|
|
port is always unauthenticated. When set to this value
|
|
the ifindex is essentially disabled.
|
|
|
|
A value of auto(2) indicates that the ifindex will
|
|
authenticate users using PWA process. In this mode
|
|
the switch will provide all the services the
|
|
end-station will need to complete the login. These
|
|
services include a Dynamic Host Configuration Protocol
|
|
(DHCP) server, a Windows Internet Naming Server (WINS),
|
|
and a Domain Name Service (DNS) Server.
|
|
|
|
A value of forceAuthorized(3) indicates the port is always
|
|
authorized. When set to this value, the ifindex will
|
|
always be authenticated.
|
|
|
|
When set to promiscousAuto(4) the services that are
|
|
required to complete the network login are not provided
|
|
by the switch. These services must be provided on a
|
|
back-end network that the end-station can communicate
|
|
with. These services might be specific to the particular
|
|
Operating System of the end-station and could also include
|
|
the same services as provided in auto mode."
|
|
DEFVAL { forceAuthorized }
|
|
::= { etsysPwaPortConfigurationEntry 5 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The PWA Port Status Table
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysPwaAuthStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysPwaAuthStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains the status objects for the Port
|
|
Web Authenticator associated with each ifIndex. An
|
|
entry appears in this table for each ifIndex that may
|
|
authenticate access to itself. All objects/instances
|
|
in this table are stored in persistent memory."
|
|
::= { etsysPwaPortStatus 1 }
|
|
|
|
etsysPwaAuthStatusEntry OBJECT-TYPE
|
|
SYNTAX EtsysPwaAuthStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status information for an Authenticator PWA."
|
|
INDEX { etsysPwaPortNumber }
|
|
::= { etsysPwaAuthStatusTable 1 }
|
|
|
|
EtsysPwaAuthStatusEntry ::=
|
|
SEQUENCE {
|
|
etsysPwaAuthPwaState
|
|
INTEGER,
|
|
etsysPwaMaxFailedAttempts
|
|
ZeroBasedCounter32,
|
|
etsysPwaFailedAttemptsSinceLogon
|
|
ZeroBasedCounter32,
|
|
etsysPwaLastLogonResult
|
|
SnmpAdminString
|
|
}
|
|
|
|
etsysPwaAuthPwaState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disconnected(1),
|
|
authenticating(2),
|
|
authenticated(3),
|
|
held(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current value of the Port Web Authenticator state
|
|
machine. When set to disconnected(1) no user is logged in.
|
|
When set to authenticating(2), it indicates that a login is
|
|
in process and has not yet completed. A value of
|
|
authenticated(3) indicates a user has successfully logged
|
|
in. When the value is held(4) it indicates that the port is
|
|
locked down because the number of failed login attempts is
|
|
greater than etsysPwaAuthMaxReq.The port will be locked until
|
|
the etsysPwaAuthQuietPeriod has expired."
|
|
::= { etsysPwaAuthStatusEntry 1 }
|
|
|
|
etsysPwaMaxFailedAttempts OBJECT-TYPE
|
|
SYNTAX ZeroBasedCounter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of failed logon attempts on this ifIndex."
|
|
::= { etsysPwaAuthStatusEntry 2 }
|
|
|
|
etsysPwaFailedAttemptsSinceLogon OBJECT-TYPE
|
|
SYNTAX ZeroBasedCounter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of failed logon attempts since the last
|
|
successful logon on this ifIndex."
|
|
::= { etsysPwaAuthStatusEntry 3 }
|
|
|
|
etsysPwaLastLogonResult OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This ASCII string provides an unstructured way for the web
|
|
based auth agent to communicate detailed error and status
|
|
indications to a network administrator."
|
|
::= { etsysPwaAuthStatusEntry 4 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The Authenticator Session Statistics Table
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysPwaAuthSessionStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysPwaAuthSessionStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains the session statistics objects for
|
|
the Authenticator PWA associated with each ifIndex. An
|
|
entry appears in this table for each ifIndex that may
|
|
authenticate access to itself. Session entries are
|
|
collected for each ifIndex. All objects/instances in this
|
|
table are stored in non-persistent memory. The instancing
|
|
in this table and the etsysPwaAuthSessionStatsHCTable are
|
|
dependent upon the switch port configuration and will always
|
|
be identical in any given switch."
|
|
::= { etsysPwaSession 1 }
|
|
|
|
etsysPwaAuthSessionStatsEntry OBJECT-TYPE
|
|
SYNTAX EtsysPwaAuthSessionStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The session statistics information for an Authenticator
|
|
PWA. This shows the current values being collected for
|
|
each session that is still in progress, or the final
|
|
values for the last valid session on each ifIndex where
|
|
there is no session currently active."
|
|
INDEX { etsysPwaPortNumber, etsysPwaAuthSessionID }
|
|
::= { etsysPwaAuthSessionStatsTable 1 }
|
|
|
|
EtsysPwaAuthSessionStatsEntry ::=
|
|
SEQUENCE {
|
|
etsysPwaAuthSessionID
|
|
Integer32,
|
|
etsysPwaAuthSessionOctetsRx
|
|
Counter32,
|
|
etsysPwaAuthSessionOctetsRxOverflow
|
|
Counter32,
|
|
etsysPwaAuthSessionOctetsTx
|
|
Counter32,
|
|
etsysPwaAuthSessionOctetsTxOverflow
|
|
Counter32,
|
|
etsysPwaAuthSessionFramesRx
|
|
Counter32,
|
|
etsysPwaAuthSessionFramesTx
|
|
Counter32,
|
|
etsysPwaAuthSessionStartTime
|
|
TimeStamp,
|
|
etsysPwaAuthSessionDuration
|
|
TimeInterval,
|
|
etsysPwaAuthSessionTerminateCause
|
|
INTEGER,
|
|
etsysPwaAuthSessionMacAddress
|
|
MacAddress,
|
|
etsysPwaAuthSessionIPAddressType
|
|
InetAddressType,
|
|
etsysPwaAuthSessionIPAddress
|
|
InetAddress,
|
|
etsysPwaAuthSessionUserName
|
|
SnmpAdminString
|
|
}
|
|
|
|
etsysPwaAuthSessionID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique ID that identifies the session on this ifindex."
|
|
::= { etsysPwaAuthSessionStatsEntry 1 }
|
|
|
|
etsysPwaAuthSessionOctetsRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of octets received in user data frames on this
|
|
ifIndex during the session."
|
|
::= { etsysPwaAuthSessionStatsEntry 2 }
|
|
|
|
etsysPwaAuthSessionOctetsRxOverflow OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the associated
|
|
etsysPwaAuthSessionOctetsRx counter has overflowed."
|
|
::= { etsysPwaAuthSessionStatsEntry 3 }
|
|
|
|
etsysPwaAuthSessionOctetsTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of octets transmitted in user data frames on
|
|
this ifIndex during the session."
|
|
::= { etsysPwaAuthSessionStatsEntry 4 }
|
|
|
|
etsysPwaAuthSessionOctetsTxOverflow OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times the associated
|
|
etsysPwaAuthSessionOctetsTx counter has overflowed."
|
|
::= { etsysPwaAuthSessionStatsEntry 5 }
|
|
|
|
etsysPwaAuthSessionFramesRx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of user data frames received on this ifIndex
|
|
during the session."
|
|
::= { etsysPwaAuthSessionStatsEntry 6 }
|
|
|
|
etsysPwaAuthSessionFramesTx OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of user data frames transmitted on this ifIndex
|
|
during the session."
|
|
::= { etsysPwaAuthSessionStatsEntry 7 }
|
|
|
|
etsysPwaAuthSessionStartTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start time of the session in hundredths of seconds
|
|
since reset."
|
|
::= { etsysPwaAuthSessionStatsEntry 8 }
|
|
|
|
etsysPwaAuthSessionDuration OBJECT-TYPE
|
|
SYNTAX TimeInterval
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The duration of the session in hundredths of seconds."
|
|
::= { etsysPwaAuthSessionStatsEntry 9 }
|
|
|
|
etsysPwaAuthSessionTerminateCause OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
linkDown(1),
|
|
logoff(2),
|
|
authControlForceUnauth(3),
|
|
portReInit(4),
|
|
portDisabled(5),
|
|
notTerminatedYet(999)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason for the session termination. When set to
|
|
linkDown(1), the ifindex has no link. When set to
|
|
logoff(2), a user has successfully logged off the
|
|
network on this ifindex. When set to
|
|
authControlForceUnauth(3) an administrator has
|
|
terminated the user session on this ifindex by setting
|
|
etsysPwaControlledPortControl to forceUnauthorized(1).
|
|
When set to portReInit(4) the ifindex has been
|
|
re-initialized by setting the object etsysPwaInitializePort.
|
|
When set to portDisabled(5) the ifindex has been disabled.
|
|
When set notTerminatedYet(999) the ifindex has an active
|
|
session."
|
|
::= { etsysPwaAuthSessionStatsEntry 10 }
|
|
|
|
etsysPwaAuthSessionMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mac address of the remote user of this session entry
|
|
stored for this ifIndex."
|
|
::= { etsysPwaAuthSessionStatsEntry 11 }
|
|
|
|
etsysPwaAuthSessionIPAddressType OBJECT-TYPE
|
|
SYNTAX InetAddressType
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that represents a type of
|
|
etsysPwaAuthSessionIPAddress.
|
|
|
|
unknown(0) An unknown address type. This value MUST
|
|
be used if the value of the corresponding
|
|
InetAddress object is a zero-length string.
|
|
It may also be used to indicate an IP address
|
|
which is not in one of the formats defined
|
|
below.
|
|
|
|
ipv4(1) An IPv4 address as defined by the
|
|
InetAddressIPv4 textual convention.
|
|
|
|
ipv6(2) An IPv6 address as defined by the
|
|
InetAddressIPv6 textual convention."
|
|
::= { etsysPwaAuthSessionStatsEntry 12 }
|
|
|
|
etsysPwaAuthSessionIPAddress OBJECT-TYPE
|
|
SYNTAX InetAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ip address of the remote user of this session entry
|
|
stored for this ifIndex. The format of this object is
|
|
defined in the etsysPwaAuthSessionIPAddressType object."
|
|
::= { etsysPwaAuthSessionStatsEntry 13 }
|
|
|
|
etsysPwaAuthSessionUserName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The username that logged on to this ifIndex."
|
|
::= { etsysPwaAuthSessionStatsEntry 14 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- The Authenticator Session Statistics HC Table
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysPwaAuthSessionStatsHCTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EtsysPwaAuthSessionStatsHCEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table that contains the session statistics objects for
|
|
the Authenticator PWA associated with each ifIndex. An entry
|
|
appears in this table for each ifIndex that may authenticate
|
|
access to itself. Session entries are collected for each
|
|
ifIndex up to the maximum allowed. When the maximum number of
|
|
allowed sessions has been reached, the oldest session
|
|
entries will be replaced with newer ones as necessary. All
|
|
objects/instances in this table are stored in non-persistent
|
|
memory."
|
|
::= { etsysPwaSession 2 }
|
|
|
|
etsysPwaAuthSessionStatsHCEntry OBJECT-TYPE
|
|
SYNTAX EtsysPwaAuthSessionStatsHCEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The session statistics information for an Authenticator
|
|
PWA. This shows the current values being collected for
|
|
each session that is still in progress, or the final
|
|
values for the last valid session on each ifIndex where there
|
|
is no session currently active."
|
|
INDEX { etsysPwaPortNumber, etsysPwaAuthSessionHCID }
|
|
::= { etsysPwaAuthSessionStatsHCTable 1 }
|
|
|
|
EtsysPwaAuthSessionStatsHCEntry ::=
|
|
SEQUENCE {
|
|
etsysPwaAuthSessionHCID
|
|
Integer32,
|
|
etsysPwaAuthSessionOctetsRxHc
|
|
Counter64,
|
|
etsysPwaAuthSessionOctetsTxHc
|
|
Counter64
|
|
}
|
|
|
|
etsysPwaAuthSessionHCID OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A unique ID that identifies the session on this ifindex."
|
|
::= { etsysPwaAuthSessionStatsHCEntry 1 }
|
|
|
|
etsysPwaAuthSessionOctetsRxHc OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of octets received in user data frames on this
|
|
ifIndex during the session."
|
|
::= { etsysPwaAuthSessionStatsHCEntry 2 }
|
|
|
|
etsysPwaAuthSessionOctetsTxHc OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of octets transmitted in user data frames on
|
|
this ifIndex during the session."
|
|
::= { etsysPwaAuthSessionStatsHCEntry 3 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Conformance Information
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysPwaMIBGroups OBJECT IDENTIFIER ::= { etsysPwaMIB 5 }
|
|
etsysPwaMIBCompliances OBJECT IDENTIFIER ::= { etsysPwaMIB 6 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Units of Conformance
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysPwaSystemGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysPwaSystemAuthControl,
|
|
etsysPwaSystemAuthHostName,
|
|
etsysPwaSystemAuthBanner,
|
|
etsysPwaSystemPwaNameServicesEnable,
|
|
etsysPwaSystemAuthIPAddressType,
|
|
etsysPwaSystemAuthIPAddress,
|
|
etsysPwaSystemAuthProtocol,
|
|
etsysPwaSystemAuthDomain
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This section has been deprecated. See
|
|
etsysPwaSystemGroupI."
|
|
::= { etsysPwaMIBGroups 1 }
|
|
|
|
etsysPwaPortConfigurationGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysPwaInitializePort,
|
|
etsysPwaAuthQuietPeriod,
|
|
etsysPwaAuthMaxReq,
|
|
etsysPwaControlledPortControl
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This section is for ifIndex based configuration of the
|
|
PWA system."
|
|
::= { etsysPwaMIBGroups 2 }
|
|
|
|
etsysPwaPortStatusGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysPwaAuthPwaState,
|
|
etsysPwaMaxFailedAttempts,
|
|
etsysPwaFailedAttemptsSinceLogon,
|
|
etsysPwaLastLogonResult
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of all login information on a per ifIndex
|
|
basis can be obtained here."
|
|
::= { etsysPwaMIBGroups 3 }
|
|
|
|
etsysPwaSessionGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysPwaAuthSessionID,
|
|
etsysPwaAuthSessionOctetsRx,
|
|
etsysPwaAuthSessionOctetsRxOverflow,
|
|
etsysPwaAuthSessionOctetsTx,
|
|
etsysPwaAuthSessionOctetsTxOverflow,
|
|
etsysPwaAuthSessionFramesRx,
|
|
etsysPwaAuthSessionFramesTx,
|
|
etsysPwaAuthSessionStartTime,
|
|
etsysPwaAuthSessionDuration,
|
|
etsysPwaAuthSessionTerminateCause,
|
|
etsysPwaAuthSessionMacAddress,
|
|
etsysPwaAuthSessionIPAddressType,
|
|
etsysPwaAuthSessionIPAddress,
|
|
etsysPwaAuthSessionUserName
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This section contains statistics associated with each
|
|
ifIndex/login."
|
|
::= { etsysPwaMIBGroups 4 }
|
|
|
|
etsysPwaSessionHCGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysPwaAuthSessionHCID,
|
|
etsysPwaAuthSessionOctetsRxHc,
|
|
etsysPwaAuthSessionOctetsTxHc
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This section contains statistics associated with each
|
|
ifIndex/login."
|
|
::= { etsysPwaMIBGroups 5 }
|
|
|
|
etsysPwaSystemGroupI OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysPwaSystemAuthControl,
|
|
etsysPwaSystemAuthHostName,
|
|
etsysPwaSystemAuthBanner,
|
|
etsysPwaSystemPwaNameServicesEnable,
|
|
etsysPwaSystemAuthProtocol,
|
|
etsysPwaSystemAuthDomain,
|
|
etsysPwaSystemAuthInetAddressType,
|
|
etsysPwaSystemAuthInetAddress,
|
|
etsysPwaLogoDisplayStatus,
|
|
etsysPwaSystemGuestUsername,
|
|
etsysPwaSystemGuestPassword,
|
|
etsysPwaSystemGuestPasswordValid,
|
|
etsysPwaSystemGuestNetworkingStatus,
|
|
etsysPwaSystemEnhancedModeRefreshTime
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This section is for the basic configuration parameters
|
|
used by the PWA system."
|
|
::= { etsysPwaMIBGroups 6 }
|
|
|
|
etsysPwaSystemAuthEnhancedGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
etsysPwaSystemAuthEnhancedMode
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This section is for the configuration of the PWA enhanced
|
|
mode of operation."
|
|
::= { etsysPwaMIBGroups 7 }
|
|
|
|
|
|
-- -------------------------------------------------------------
|
|
-- Compliance Statements
|
|
-- -------------------------------------------------------------
|
|
|
|
etsysPwaMIBCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Deprecated, see etsysPwaMIBComplianceI."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { etsysPwaSystemGroup,
|
|
etsysPwaPortConfigurationGroup,
|
|
etsysPwaPortStatusGroup,
|
|
etsysPwaSessionGroup
|
|
}
|
|
|
|
OBJECT etsysPwaAuthSessionIPAddressType
|
|
DESCRIPTION
|
|
"See etsysPwaMIBComplianceI."
|
|
::= { etsysPwaMIBCompliances 1 }
|
|
|
|
etsysPwaMIBComplianceI MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for hosts using
|
|
Port Web Authentication."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { etsysPwaSystemGroupI,
|
|
etsysPwaPortConfigurationGroup,
|
|
etsysPwaPortStatusGroup,
|
|
etsysPwaSessionGroup
|
|
}
|
|
|
|
|
|
OBJECT etsysPwaAuthSessionIPAddressType
|
|
DESCRIPTION
|
|
"The implementation may support only IPv4. If
|
|
a domain name is used, a WINS/DNS client is
|
|
required in the switch that is capable of
|
|
resolving the name. When a domain name is used,
|
|
this object will supercede the value set in
|
|
etsysPwaSystemAuthHostName and render that value
|
|
as unused."
|
|
|
|
GROUP etsysPwaSystemAuthEnhancedGroup
|
|
DESCRIPTION
|
|
"Support for this group is mandatory for entities
|
|
supporting the PWA enhanced mode of operation."
|
|
|
|
::= { etsysPwaMIBCompliances 2 }
|
|
|
|
END
|