mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
librenms-librenms/mibs/HP-SN-MIBS
Adam Amstrong 9708e6b5f3 rename HP SN MIBs file 
git-svn-id: http://www.observium.org/svn/observer/trunk@1647 61d68cd4-352d-0410-923a-c4978735b2b8
2010-08-05 00:35:21 +00:00

37205 lines
1.0 MiB
Raw Blame History

HP-SN-ROOT-MIB DEFINITIONS ::= BEGIN
-- LAN Switch-Router Root MIB Release 1.0.1
-- Revision 01/30/99
-- Copyright 1996 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry SNMP Management Information Base Specification
-- (Specification) embodies Foundry's confidential and
-- proprietary intellectual property. Foundry retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS," and Foundry makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
-- SECTION 1: Top Level Definitions
-- Branches under "switch"
-- Branch for registration of values for objects
-- with syntax of OBJECT IDENTIFIER
-- snReg OBJECT IDENTIFIER ::= { switch 1 }
-- Branch for 'Enterprise' field value in traps
-- snTraps OBJECT IDENTIFIER ::= { switch 2 }
-- snChaTrap OBJECT IDENTIFIER ::= { snTraps 1 }
-- Major Switch MIB branches
IMPORTS
enterprises
FROM RFC1155-SMI;
hp OBJECT IDENTIFIER ::= { enterprises 11 }
nm OBJECT IDENTIFIER ::= { hp 2 }
system OBJECT IDENTIFIER ::= { nm 3 }
netElement OBJECT IDENTIFIER ::= { system 7 }
hpEtherSwitch OBJECT IDENTIFIER ::= { netElement 11 }
hpSwitchCore OBJECT IDENTIFIER ::= { hpEtherSwitch 12 }
hpSwitch9308 OBJECT IDENTIFIER ::= { hpEtherSwitch 13 }
hpSwitch9304 OBJECT IDENTIFIER ::= { hpEtherSwitch 14 }
hpSwitch6308 OBJECT IDENTIFIER ::= { hpEtherSwitch 15 }
hpSwitch6208 OBJECT IDENTIFIER ::= { hpEtherSwitch 16 }
hpSwitch9315 OBJECT IDENTIFIER ::= { hpEtherSwitch 28 }
switch OBJECT IDENTIFIER ::= { hpSwitchCore 1 }
snChassis OBJECT IDENTIFIER ::= { switch 1 }
snAgentSys OBJECT IDENTIFIER ::= { switch 2 }
snSwitch OBJECT IDENTIFIER ::= { switch 3 }
snL4 OBJECT IDENTIFIER ::= { switch 4 }
snStack OBJECT IDENTIFIER ::= { switch 5 }
router OBJECT IDENTIFIER ::= { hpSwitchCore 2 }
snIpx OBJECT IDENTIFIER ::= { router 1 }
snIp OBJECT IDENTIFIER ::= { router 2 }
snRip OBJECT IDENTIFIER ::= { router 3 }
snOspf OBJECT IDENTIFIER ::= { router 4 }
snDvmrp OBJECT IDENTIFIER ::= { router 5 }
snIgmp OBJECT IDENTIFIER ::= { router 6 }
snFsrp OBJECT IDENTIFIER ::= { router 7 }
snGblRt OBJECT IDENTIFIER ::= { router 8 }
snPim OBJECT IDENTIFIER ::= { router 9 }
snAppleTalk OBJECT IDENTIFIER ::= { router 10 }
snBgp4 OBJECT IDENTIFIER ::= { router 11 }
snVrrp OBJECT IDENTIFIER ::= { router 12 }
snLoopbackIf OBJECT IDENTIFIER ::= { router 13 }
snPOS OBJECT IDENTIFIER ::= { router 14 }
snMpls OBJECT IDENTIFIER ::= { router 15 }
END
HP-SN-AGENT-MIB DEFINITIONS ::= BEGIN
-- BigIron Router Switch Agent MIB Release 2.0.0
-- Revision 10/11/99
-- Copyright 1996 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry SNMP Management Information Base Specification
-- (Specification) embodies Foundry's confidential and
-- proprietary intellectual property. Foundry retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS," and Foundry makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
-- SECTION 1: Top Level Definitions
-- Imports
IMPORTS
TimeTicks, IpAddress, Counter, Gauge
FROM RFC1155-SMI
Unsigned32
FROM SNMPv2-SMI
OBJECT-TYPE
FROM RFC-1212
InterfaceIndex
FROM IF-MIB
snChassis, snAgentSys, snStack
FROM HP-SN-ROOT-MIB;
-- textual conventions
DisplayString ::=
OCTET STRING
-- This data type is used to model textual information taken
-- from the NVT ASCII character set. By convention, objects
-- with this syntax are declared as having
--
-- SIZE (0..255)
MacAddress ::=
OCTET STRING (SIZE(6))
-- This data type is used to model media addresses. For many
-- types of media, this will be in a binary representation.
-- For example, an ethernet address would be represented as
-- a string of 6 octets.
-- Groups
snChasGen OBJECT IDENTIFIER ::= { snChassis 1 }
snChasPwr OBJECT IDENTIFIER ::= { snChassis 2 }
snChasFan OBJECT IDENTIFIER ::= { snChassis 3 }
-- SECTION 2: MIB Objects
-- General Chassis Information
snChasType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The chassis type represents the type
of Foundry product being managed. "
::= { snChasGen 1 }
snChasSerNum OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The serial number of the chassis. If the
serial number is unknown or unavailable then
the value should be a zero length string."
::= { snChasGen 2 }
-- Power Supply Status
snChasPwrSupplyStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A bit array that contains the value of the
Chassis Power Supplies. This is a packed bit string;
the 2 power supplies status are encoded into 4 bits
(a nibble).
There are multiple power supplies per chassis in this release.
The following shows the meaning of each bit:
(bit 0 is the least significant bit).
bit position meaning
------------ -------
12-31 reserved
11 Power Supply 4 DC (0=bad, 1=good).
10 Power Supply 3 DC (0=bad, 1=good).
9 Power Supply 4 present status (0=present, 1=not-present).
8 Power Supply 3 present status (0=present, 1=not-present).
4-7 reserved
3 Power Supply 2 DC (0=bad, 1=good).
2 Power Supply 1 DC (0=bad, 1=good).
1 Power Supply 2 present status (0=present, 1=not-present).
0 Power Supply 1 present status (0=present, 1=not-present)."
::= { snChasGen 3 }
-- Fan Status
snChasFanStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A bit array that contains the value of the
fan status. This is a packed bit string. The
status of each fan is encoded into one bit.
bit value meaning
--------- -------
0 fan failure.
1 fan good.
There are two fans per VLAN Switch chassis in this release.
The following shows the meaning of each bit:
(bit 0 is the least significant bit).
bit position meaning
------------ -------
6-31 reserved
5 fan6 status
4 fan5 status
3 fan4 status
2 fan3 status
1 fan2 status
0 fan1 status"
::= { snChasGen 4 }
snChasMainBrdDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The main board description string. (It is obsoleted for Chassis Product)"
::= { snChasGen 5 }
snChasMainPortTotal OBJECT-TYPE
SYNTAX INTEGER (1..24)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ports for the main board. (It is obsoleted for Chassis Product)"
::= { snChasGen 6 }
snChasExpBrdDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The expansion board description string. Expansion
board are those boards attaching on the main board.
(It is obsoleted for Chassis Product)"
::= { snChasGen 7 }
snChasExpPortTotal OBJECT-TYPE
SYNTAX INTEGER (1..24)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ports for the expansion board.
(It is obsoleted for Chassis Product)"
::= { snChasGen 8 }
snChasStatusLeds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A bit array that contains the value of the
front panel status LEDs. This is a bit-map;
each LED is encoded into 1 bit for each switch
port. The maximum number of ports in one chassis
is 24 that means 24 Ports Status LEDs. The expansion port
number always begins from the last main port number.
The following shows the meaning of each bit for each
switch port:
bit value meaning
-------- ---------
0 off (Link off)
1 on (Link on)
The bitmap of LEDs are as following:
(Port1) (Port4) (Port8)
Bit (Bit0) (Bit3) (Bit7)
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
--------"
::= { snChasGen 9 }
snChasTrafficLeds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A bit array that contains the value of the
front panel traffic LEDs. This is a packed bit string;
each LED is encoded into 1 bit for each switch
port. The maximum number of ports in one chassis
is 24 that means 24 Ports Traffic LEDs. The expansion port
number always begins from the last main port number.
The following shows the meaning of each bit for each
switch port:
bit value meaning
-------- ---------
0 off (no traffic)
1 on (traffic)
The bitmap of LEDs are as following:
(Port1) (Port4) (Port8)
Bit (Bit0) (Bit3) (Bit7)
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
--------"
::= { snChasGen 10 }
snChasMediaLeds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A bit array that contains the value of the
front panel media LEDs. This is a packed bit string;
each LED is encoded into 1 bit for each switch port.
The maximum number of ports in one chassis is 24
that means 24 Ports Media LEDs. The expansion port
number always begins from the last main port number.
The following shows the meaning of each bit for each
switch port:
bit value meaning
--------- -------
0 half duplex
1 full duplex
The bitmap of LEDs are as following:
(Port1) (Port4) (Port8)
Bit (Bit0) (Bit3) (Bit7)
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
---------"
::= { snChasGen 11 }
snChasEnablePwrSupplyTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the SNMP agent process is
permitted to generate power supply failure traps."
DEFVAL { enabled }
::= { snChasGen 12 }
snChasMainBrdId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The main board identifier, which can uniquely identify a board
type. It is an encoded octet string with the following meaning:
octet 0 - octet string format version, which identifies the
format of this string.
If format version octet has the value 1, the octets after the
version octet have the following meaning:
octet 1 - product type, FIWG=0x57, FIBB=0x42, FIMLS=0x4D
NI=0x4E, TI=0x54, TIRT=0x52
octet 2 - board type, POWERPC=1, ALPHA=2
The length of the octet string is 27.
If format version octet has the value 2, the octets after the
version octet have the following meaning:
octet 1 - product type:
BI_WG 0x57
BI_BB 0x42
BI_NI 0x4E
NI_M4 0x4D
BI_SLB 0x53
octet 2 - module type:
MASTER_FIBER_8G 0x0
MASTER_FIBER_4G 0x1
MASTER_COPPER_16 0x2
FI_MASTER_FIBER_2G 0x4
FI_MASTER_FIBER_4G 0x5
MASTER_COPPER_8G 0x6
FI_MASTER_FIBER_8G 0x7
MASTER_COPPER_12_2 0x9
MASTER_FIBER_2G 0x12
MASTER_FIBER_0G 0x14
FI_MASTER_COPPER_8G 0x1D
FI_MASTER_COPPER_4G 0x1F
FI_MASTER_COPPER_2G 0x20
MASTER_COPPER_4G 0x21
MASTER_COPPER_2G 0x22
MASTER_M4_8G 0x23
MASTER_M4_4G 0x24
MASTER_M4_0G 0x26
The length of the octet string is 28.
Both format version 1 and 2:
octet 3 - processor type, PVR_M603=3, PVR_M604=4, PVR_M603E=6,
PVR_M603EV=7, PVR_M604E=9
octet 4 to
octet 5 - processor speed in MHz
octet 6 - MAC type:
MAC_NONE=0,
MAC_SEEQ_10_100=1,
MAC_DEC_10_100=2,
MAC_SEEQ_1000=5,
MAC_GMAC_1000=6,
MAC_VLSI_1000=7
octet 7 - PHY type, PHY_NONE=0, PHY_QSI=1, PHY_BROADCOM=2,
PHY_ICS=3, PHY_NATIONAL=4, PHY_LEVEL1=6, PHY_LEVEL16=7,
PHY_LEVEL24=8
octet 8 - port type, COPPER=0, FIBER=1
octet 9 - fiber port type, NONFIBER=0, SX_FIBER=1,
LX_FIBER=2, LHX_FIBER=3, LX_SX_FIBER=4,
LHB_FIBER=5
octet 10 to
octet 13 - DRAM size in KBytes
octet 14 to
octet 17 - boot flash size in KBytes
octet 18 to
octet 21 - code flash size in KBytes
octet 22 to
octet 27 - serial number.
Format version 1 only:
octet 28 - chassis backplane type.
chassis4000 = 0x00
chassis8000 = 0x04
chassis15000 = 0x05
Turbo8 = 0x07 (stack2)
FastIron2 = 0x06 (stack1)"
::= { snChasGen 13 }
snChasExpBrdId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The expansion board identifier. Expansion board are those
boards attaching on the main board. It is an encoded octet
string with the following meaning:
octet 0 - octet string format version, which identifies
the format of this string.
If format version octet has the value 1, the octets after
the version octet have the following meaning:
octet 1 - expansion board type, HUNDRED_MEG_1PORT=1,
HUNDRED_MEG_2PORT=2, HUNDRED_MEG_1PORT_COPPER=3,
HUNDRED_MEG_2PORT_COPPER=4, HUNDRED_MEG_2PORT_LX=5,
GIGA_1PORT=8, GIGA_2PORT=9
octet 2 - fiber port type, NONFIBER=0, SX_FIBER=1,
LX_FIBER=2, LHX_FIBER=3, LX_SX_FIBER=4
(It is obsoleted for Chassis Product)"
::= { snChasGen 14 }
snChasSpeedLeds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A bit array that contains the value of the
front panel media LEDs. This is a packed bit string;
each LED is encoded into 1 bit for each switch port.
The maximum number of ports in one chassis is 24
that means 24 Ports Speed LEDs. The expansion port
number always begins from the last main port number.
The following shows the meaning of each bit for each
switch port:
bit value meaning
--------- -------
0 10 MBit
1 100 MBit
The bitmap of LEDs are as following:
(Port1) (Port4) (Port8)
Bit (Bit0) (Bit3) (Bit7)
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
---------"
::= { snChasGen 15 }
snChasEnableFanTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the SNMP agent process is
permitted to generate fan failure traps."
DEFVAL { enabled }
::= { snChasGen 16 }
snChasIdNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An administratively-assigned chassis identity number,
used by inventory control."
::= { snChasGen 17 }
snChasActualTemperature OBJECT-TYPE
SYNTAX INTEGER (-110..250)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Temperature of the chassis. Each unit is 0.5 degrees Celcius.
Only management module built with temperature sensor hardware
is applicable. For those non-applicable management module, it
returns no-such-name."
::= { snChasGen 18 }
snChasWarningTemperature OBJECT-TYPE
SYNTAX INTEGER (0..250)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Actual temperature higher than this threshold value will trigger
the switch to send a temperature warning trap. Each unit is 0.5
degrees Celcius. Only management module built with temperature
sensor hardware is applicable. For those non-applicable management
module, it returns no-such-name."
::= { snChasGen 19 }
snChasShutdownTemperature OBJECT-TYPE
SYNTAX INTEGER (0..250)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Actual temperature higher than this threshold value will shutdown
a partial of the switch hardware to cool down the system. Each unit
is 0.5 degrees Celcius. Only management module built with temperature
sensor hardware is applicable. For those non-applicable management
module, it returns no-such-name."
::= { snChasGen 20 }
snChasEnableTempWarnTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the SNMP agent process is
permitted to generate temperature warning traps."
DEFVAL { enabled }
::= { snChasGen 21 }
-- Flash Card
snChasFlashCard OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A bit array that contains the value of the
flash card status. This is a packed bit string. The
status of each flash card is encoded into one bit.
bit value meaning
--------- -------
0 flash card absent.
1 flash card present.
There are up to two flash cards in this release.
This object is valid if M4 management module is present.
The following shows the meaning of each bit:
(bit 0 is the least significant bit).
bit position meaning
------------ -------
2-31 reserved
1 flash card 2 status
0 flash card 1 status"
::= { snChasGen 22 }
snChasFlashCardLeds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A bit array that contains the value of the
flash card LEDs. This is a packed bit string;
each LED is encoded into 1 bit for each flash card.
bit value meaning
-------- ---------
0 off
1 on
"
::= { snChasGen 23 }
snChasNumSlots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of slots of the chassis."
::= { snChasGen 24 }
snChasArchitectureType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Architecture type."
::= { snChasGen 25 }
snChasProductType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Product type."
::= { snChasGen 26 }
-- Power Supply Table
snChasPwrSupplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnChasPwrSupplyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of each power supply information. Only installed
power supply appears in a table row."
::= { snChasPwr 1 }
snChasPwrSupplyEntry OBJECT-TYPE
SYNTAX SnChasPwrSupplyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the power supply table."
INDEX { snChasPwrSupplyIndex }
::= { snChasPwrSupplyTable 1 }
SnChasPwrSupplyEntry ::= SEQUENCE {
snChasPwrSupplyIndex
INTEGER,
snChasPwrSupplyDescription
DisplayString,
snChasPwrSupplyOperStatus
INTEGER
}
snChasPwrSupplyIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to power supply table."
::= { snChasPwrSupplyEntry 1 }
snChasPwrSupplyDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power supply description string."
::= { snChasPwrSupplyEntry 2 }
snChasPwrSupplyOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
normal(2),
failure(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The power supply operation status."
::= { snChasPwrSupplyEntry 3 }
-- Fan Table
snChasFanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnChasFanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of each fan information. Only installed
fan appears in a table row."
::= { snChasFan 1 }
snChasFanEntry OBJECT-TYPE
SYNTAX SnChasFanEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the fan table."
INDEX { snChasFanIndex }
::= { snChasFanTable 1 }
SnChasFanEntry ::= SEQUENCE {
snChasFanIndex
INTEGER,
snChasFanDescription
DisplayString,
snChasFanOperStatus
INTEGER
}
snChasFanIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to fan table."
::= { snChasFanEntry 1 }
snChasFanDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fan description string."
::= { snChasFanEntry 2 }
snChasFanOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
normal(2),
failure(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fan operation status."
::= { snChasFanEntry 3 }
-- Agent Groups
snAgentGbl OBJECT IDENTIFIER ::= { snAgentSys 1 }
snAgentBrd OBJECT IDENTIFIER ::= { snAgentSys 2 }
snAgentTrp OBJECT IDENTIFIER ::= { snAgentSys 3 }
snAgentBoot OBJECT IDENTIFIER ::= { snAgentSys 4 }
snAgCfgEos OBJECT IDENTIFIER ::= { snAgentSys 5 }
snAgentLog OBJECT IDENTIFIER ::= { snAgentSys 6 }
snAgentSysParaConfig OBJECT IDENTIFIER ::= { snAgentSys 7 }
snAgentConfigModule OBJECT IDENTIFIER ::= { snAgentSys 8 }
snAgentUser OBJECT IDENTIFIER ::= { snAgentSys 9 }
snAgentRedundant OBJECT IDENTIFIER ::= { snAgentSys 10 }
snAgentCpu OBJECT IDENTIFIER ::= { snAgentSys 11 }
snAgentHw OBJECT IDENTIFIER ::= { snAgentSys 12 }
-- SECTION 2: MIB Objects
-- Agent's Global Group
snAgReload OBJECT-TYPE
SYNTAX INTEGER {
other(1),
running(2),
reset(3),
busy(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action object to reboot the agent.
The following values can only be read:
other(1).....agent in unknown or other state
running(2)...agent running
busy(4).......reload not allowed at this time, flash is busy
The following value can be written:
reset(3).....do a hard reset
The agent will return a
response before the action occurs."
::= { snAgentGbl 1 }
snAgEraseNVRAM OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
error(2),
erase(3),
erasing(4),
busy(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action object to erase NVRAM of the agent.
The following values can only be read:
normal(1)
error(2)... operation failed or bad flash
erasing(4)...agent is erasing NVRAM flash
busy(5).......operation not allowed at this time, flash is busy
The following value can be written:
erase(3).....do erase
The agent will return a response even before the erase is done.
And the read value will be erasing until erase is done.
And the erase request will be rejected until error or normal."
::= { snAgentGbl 2 }
snAgWriteNVRAM OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
error(2),
write(3),
writing(4),
busy(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action object to save all configuration info to
NVRAM of the agent.
The following values can only be read:
normal(1)
error(2)... operation failed or bad flash
writing(4)...agent is writing NVRAM flash
busy(5).......operation not allowed at this time, flash is busy
The following value can be written:
write(3).....do write
The agent will return a response even before the write is done.
And the read value will be writing until write is done.
And the write request will be rejected until error or normal."
::= { snAgentGbl 3 }
snAgConfigFromNVRAM OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
error(2),
config(3),
configing(4),
busy(5)
}
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Action object to config the switch from NVRAM of the agent.
The following values can only be read:
normal(1)
error(2)... operation failed or bad flash
configing(4)...configing from NVRAM flash is in process.
busy(5).......operation not allowed at this time, flash is busy
The following value can be written:
config(3).....do config
The agent will return a response after config is done."
::= { snAgentGbl 4 }
-- image and config file down/up load
snAgTftpServerIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The tftp server address, this will be used for both download/upload
image file and config file."
::= { snAgentGbl 5 }
snAgImgFname OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Name of the image file including path currently associated
with the system. When the object is not used, the value is a
zero length string."
::= { snAgentGbl 6 }
snAgImgLoad OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
flashPrepareReadFailure(2),
flashReadError(3),
flashPrepareWriteFailure(4),
flashWriteError(5),
tftpTimeoutError(6),
tftpOutOfBufferSpace(7),
tftpBusy(8),
tftpRemoteOtherErrors(9),
tftpRemoteNoFile(10),
tftpRemoteBadAccess(11),
tftpRemoteDiskFull(12),
tftpRemoteBadOperation(13),
tftpRemoteBadId(14),
tftpRemoteFileExists(15),
tftpRemoteNoUser(16),
operationError(17),
loading(18),
uploadMPPrimary(19),
downloadMPPrimary(20),
uploadMPSecondary(21),
downloadMPSecondary(22),
tftpWrongFileType(23),
downloadSPPrimary(24),
downloadSPSecondary(25)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action object to down/up load a new image
to the agent. The following values:
Error values: from normal(1) to operationError(17) and tftpWrongFileType(23).
loading(18) .. operation is in process.
The following values are used for set :
uploadMPPrimary(19)..upload the Primary image from MP flash to tftp server.
downloadMPPrimary(20)..download the Primary image from tftp server to MP flash.
uploadMPSecondary(21)..upload the Secondary image from MP flash to tftp server.
downloadMPSecondary(22)..download the Secondary image from tftp server to MP flash.
downloadSPPrimary(24)..download the Primary image from tftp server to SP flash.
downloadSPSecondary(25)..download the Secondary image from tftp server to SP flash.
MP is the management processor, SP is the switch processor.
The image filename is defined in
snAgImgFname. The tftp server address is defined in snAgTftpServerIp.
Atomic set of snAgImgLoad, snAgImgFname and
snAgTftpServerIp is required to allow down/up load to happen.
And the write request will be rejected during loading until error
or normal."
::= { snAgentGbl 7 }
snAgCfgFname OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Name of the config file(s) including path currently associated
with the system. Some agents in special
situations may support a value which contains
multiple file names instead of a single file
name. Multiple names are specified as a list
of file names separated by semicolons (;).
When the object is not used, the value is a
zero length string."
::= { snAgentGbl 8 }
snAgCfgLoad OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
flashPrepareReadFailure(2),
flashReadError(3),
flashPrepareWriteFailure(4),
flashWriteError(5),
tftpTimeoutError(6),
tftpOutOfBufferSpace(7),
tftpBusy(8),
tftpRemoteOtherErrors(9),
tftpRemoteNoFile(10),
tftpRemoteBadAccess(11),
tftpRemoteDiskFull(12),
tftpRemoteBadOperation(13),
tftpRemoteBadId(14),
tftpRemoteFileExists(15),
tftpRemoteNoUser(16),
operationError(17),
loading(18),
uploadFromFlashToServer(20),
downloadToFlashFromServer(21),
uploadFromDramToServer(22),
downloadToDramFromServer(23),
uploadFromFlashToNMS(24),
downloadToFlashFromNMS(25),
uploadFromDramToNMS(26),
downloadToDramFromNMS(27),
operationDoneWithNMS(28),
tftpWrongFileType(29),
downloadToDramFromServerOverwrite(30)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action object to down/up load a config image
to the agent. The following values can be
read :
Error values: from normal(1) to operationError(17) and tftpWrongFileType(29).
loading(18) .. operation is in process.
The following value can be used to set:
uploadFromFlashToServer(20)..upload the config from flash
to tftp server.
downloadToFlashFromServer(21)..download the config to flash
from tftp server.
uploadFromDramToServer(22)..upload the config from DRAM
to tftp server.
downloadToDramFromServer(23)..download the config to DRAM
from tftp server.
downloadToDramFromServerOverwrite(30)..download the config to DRAM
from tftp server, clear the running-config,
and overwrite with the new config.
The following value can be used to set:
uploadFromFlashToNMS(24)..upload the config from flash to NMS.
downloadToFlashFromNMS(25)..download the config to flash from NMS.
uploadFromDramToNMS(26)..upload the config from DRAM to NMS.
downloadToDramFromNMS(27)..download the config to DRAM from NMS.
The config filename is defined in
snAgCfgFname. The tftp server address is defined in snAgTftpServerIp.
Atomic set of snAgCfgLoad, snAgCfgFname and snAgTftpServerIp is
required to allow down/up load to happen. And the write request
will be rejected during loading until error or normal.
For those NMS commands from (24) to (27), The snAgCfgEosTable MIB must
be sent along in one PDU. A seperate write memory cli or set
snAgWriteNVRAM is required to save the config to NVRAM."
::= { snAgentGbl 9 }
-- default gateway ip address
snAgDefGwayIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The default gateway (router) address."
::= { snAgentGbl 10 }
-- image version
snAgImgVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of the running software in the form
'major.minor.maintenance[letters]'."
::= { snAgentGbl 11 }
snAgFlashImgVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of the software image saved in local
storage such as flash memory in the form
'major.minor.maintenance[letters]'. If not
known or not available, then the value is
a zero length string."
::= { snAgentGbl 12 }
snAgGblIfIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interface ip address."
::= { snAgentGbl 13 }
snAgGblIfIpMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interface ip address mask."
::= { snAgentGbl 14 }
snAgGblPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..48))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"System Security Access Password and this is only
allowed to use for setting but not for reading.
An SNMP-Get will get an zero string."
::= { snAgentGbl 15 }
snAgTrpRcvrCurEntry OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current total entries of the Trap
Receiver Table are created."
::= { snAgentGbl 16 }
snAgGblDataRetrieveMode OBJECT-TYPE
SYNTAX INTEGER {
nextbootCfg(0),
operationalData(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"By default, this mode is set to nextbootCfg(0).
The VLAN Table and Port-STP Table data will be retrieved
according to this mode.
nextbootCfg(0).........the nextboot configuration data are retrieved
operationalData(1)..........the current running data are retrieved"
::= { snAgentGbl 19 }
snAgSystemLog OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(5))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The system log object to indicate whether any Network
Management Station(NMS) has login. The first byte
of the octet string is the value decribed below and
followed by 4 bytes of secret code.
login(1)..... a value for a NMS to login.
heartbeat(2)... a value for the login NMS periodically to
checkin; Otherwise, the Agent will automatically
set this object to logout(3) after a timeout
period.
logout(3).... a value for a NMS to logout.
changePassword(4).... a value for the login NMS to change
password, only if snAgGblPasswordChangeMode
was configured to 'anyMgmtEntity'.
changeReadOnlyCommunity(5).... a value for the login NMS
to change the read-only community string,
only if snAgGblPasswordChangeMode was
configured to 'anyMgmtEntity'.
changeReadWriteCommunity(6).... a value for the login NMS
to change the read-write community string,
only if snAgGblPasswordChangeMode was
configured to 'anyMgmtEntity'."
::= { snAgentGbl 20 }
snAgGblEnableColdStartTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the SNMP agent process is
permitted to generate cold start traps."
DEFVAL { enabled }
::= { snAgentGbl 21 }
snAgGblEnableLinkUpTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the SNMP agent process is
permitted to generate link up traps."
DEFVAL { enabled }
::= { snAgentGbl 22 }
snAgGblEnableLinkDownTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the SNMP agent process is
permitted to generate link down traps."
DEFVAL { enabled }
::= { snAgentGbl 23 }
snAgGblPasswordChangeMode OBJECT-TYPE
SYNTAX INTEGER {
anyMgmtEntity(1),
consoleAndTelnet(2),
consoleOnly(3),
telnetOnly(4) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specify which management entity is allowed to change
the password. 'anyMgmtEntity' management entities are
SNMP management station, console command line interface,
and telnet command line interface. For security reason,
this object can only be modified by console command line
interface or telnet command line interface. The default
value is 'consoleAndTelnet', of which both console and
telnet command line interfaces are allowed to change
the password."
::= { snAgentGbl 24 }
snAgGblReadOnlyCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SNMP read community string and this is only allowed
to use for setting but not for reading. An SNMP-Get
will get an zero length string."
::= { snAgentGbl 25 }
snAgGblReadWriteCommunity OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SNMP read-write community string and this is only
allowed to use for setting but not for reading. An
SNMP-Get will get an zero length string."
::= { snAgentGbl 26 }
snAgGblCurrentSecurityLevel OBJECT-TYPE
SYNTAX INTEGER (0..5)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This represnts the current log-in security level.
Each level of security requires a password to permit
user for different system configurations."
::= { snAgentGbl 27 }
snAgGblSecurityLevelSet OBJECT-TYPE
SYNTAX INTEGER (0..5)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This shows which the security level password to be set."
::= { snAgentGbl 28 }
snAgGblLevelPasswordsMask OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This shows the bitmap of level passwords which successfully assigned to the system."
::= { snAgentGbl 29 }
snAgGblQueueOverflow OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"false - The device queues are not overflow.
true - The device queues are overflow."
::= { snAgentGbl 30 }
snAgGblBufferShortage OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"false - The device buffers are adequate.
true - The device buffers are in shortage."
::= { snAgentGbl 31 }
snAgGblDmaFailure OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"false - The device DMAs are in good condition.
true - One of the DMAs in the device fails."
::= { snAgentGbl 32 }
snAgGblResourceLowWarning OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"false - No, the device does not have resource-low-warning.
true - Yes, the device does have resource-low-warning."
::= { snAgentGbl 33 }
snAgGblExcessiveErrorWarning OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"false - No, the device does not have any excessive collision, FCS errors, alignment warning etc.
true - Yes, the device does have."
::= { snAgentGbl 34 }
snAgGblCpuUtilData OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The statistics collection of utilization of the CPU in the device. Reading this object resets all the counters. Therefore, a user need not set snAgGblUtilCollect."
::= { snAgentGbl 35 }
snAgGblCpuUtilCollect OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS deprecated
DESCRIPTION
"enable(1) - The beginning of statistics collection of utilization of the CPU in the device.
disable(0) - The end of statistics collection of utilization of the CPU in the device.
This object is deprecated. User need not set this object. User can read snAgGblCpuUtilData to reset all the counters. "
::= { snAgentGbl 36 }
snAgGblTelnetTimeout OBJECT-TYPE
SYNTAX INTEGER (0..240)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Telnet session idling timeout value. Writing value 0 to
this object never timeouts any telnet sessions. Each value
unit is one minute."
::= { snAgentGbl 37 }
snAgGblEnableWebMgmt OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable web management."
DEFVAL { enabled }
::= { snAgentGbl 38 }
snAgGblSecurityLevelBinding OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This represnts the binding of a given password to which
security level. A value of 255 indicates an invalid
binding."
::= { snAgentGbl 39 }
snAgGblEnableSLB OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable/disable Server Load Balancing."
::= { snAgentGbl 40 }
snAgSoftwareFeature OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A bit string representing the software feature of the running
switch/router image. These features were conditional compiled
to different product images. For each bit, exist feature has
a value of 1, but non-exist feature has a value of 0.
octet 0, bit 0 - RMON
octet 0, bit 1 - ipx switching
octet 0, bit 2 - server load balancing
octet 0, bit 3 - layer 3 filter in switch
octet 0, bit 4 - ipx routing
octet 0, bit 5 - appletalk routing
octet 0, bit 6 - ip multicast routing
octet 0, bit 7 - local access control
octet 1, bit 0 - BGP routing
octet 1, bit 1 - loopback interface
octet 1, bit 2 - BigIron multi-management module
octet 1, bit 3 - BigIron SYSIF II
octet 1, bit 4 - BigIron POS support
octet 1, bit 5 - appletalk cable vlan
octet 1, bit 6 - 64 subnet
octet 1, bit 7 - multi-slot trunk
octet 2, bit 0 - TACACS
octet 2, bit 1 - Gigabit Ethernet port auto-negotiation mode
octet 2, bit 2 - FSRP
octet 2, bit 3 - Exodus requested OSPF enhancement
octet 2, bit 4 - OSPF NSSA
octet 2, bit 5 - POS
octet 2, bit 6 - QOS
octet 2, bit 7 - Single Span
octet 3, bit 0 - Fast Span
octet 3, bit 1 - Base L3
octet 3, bit 2 - static log buffer
octet 3, bit 3 - L2 POS
octet 3, bit 4 - BI15K
octet 3, bit 5 - L2 ATM
octet 3, bit 6 - ATM
octet 3, bit 7 - NETFLOW
octet 4, bit 0 - SFLOW
octet 4, bit 1 - GVRP
octet 4, bit 2 - GARP
octet 4, bit 3 - dynamic trunk
octet 4, bit 4 - IGC 8G
octet 4, bit 5 - rate limit
octet 4, bit 6 - IPC rate limit
octet 4, bit 7 - MPLS
octet 5, bit 0 - ISIS
octet 5, bit 1 - link aggregation
octet 5, bit 2 - port dual mode
octet 5, bit 3 - private vlan
octet 5, bit 4 - MBGP
octet 5, bit 5 - ipv6 protocol vlan
octet 5, bit 6 - X10G
octet 5, bit 7 - fastiron edge switch/router (gridiron)
octet 6, bit 0 - FDP
octet 6, bit 1 - port tag type
Bit 0 is the least significant bit of an octet, and
bit 7 is the most significant bit of an octet."
::= { snAgentGbl 41 }
snAgGblEnableModuleInsertedTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the SNMP agent process is permitted to
generate hardware module inserted to chassis traps."
DEFVAL { enabled }
::= { snAgentGbl 42 }
snAgGblEnableModuleRemovedTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the SNMP agent process is permitted to
generate hardware module removed from chassis traps."
DEFVAL { enabled }
::= { snAgentGbl 43 }
snAgGblTrapMessage OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A generic trap message string."
::= { snAgentGbl 44 }
snAgGblEnableTelnetServer OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable telnet server in device."
DEFVAL { enabled }
::= { snAgentGbl 45 }
snAgGblTelnetPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..48))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Telnet Access Password and this is only
allowed to use for setting but not for reading.
An SNMP-Get will get an zero string."
::= { snAgentGbl 46 }
snAgBuildDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The date of the built software."
::= { snAgentGbl 47 }
snAgBuildtime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time of the built software."
::= { snAgentGbl 48 }
snAgBuildVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of the built software in the form
'major.minor.maintenance[letters]'."
::= { snAgentGbl 49 }
snAgGblCpuUtil1SecAvg OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The statistics collection of 1 second CPU utilization."
::= { snAgentGbl 50 }
snAgGblCpuUtil5SecAvg OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The statistics collection of 5 second CPU utilization."
::= { snAgentGbl 51 }
snAgGblCpuUtil1MinAvg OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The statistics collection of 1 minute CPU utilization."
::= { snAgentGbl 52 }
snAgGblDynMemUtil OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system dynamic memory utilization, in unit of percentage."
::= { snAgentGbl 53 }
snAgGblDynMemTotal OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total amount of system dynamic memory, in number of bytes."
::= { snAgentGbl 54 }
snAgGblDynMemFree OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The free amount of system dynamic memory, in number of bytes."
::= { snAgentGbl 55 }
snAgImgLoadSPModuleType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
vm1(2),
pos12(3),
pos48(4),
atm(5),
gignpa(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The switch processor module type of which that receives
the downloaded image."
::= { snAgentGbl 56 }
snAgImgLoadSPModuleNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The slot numner of a switch processor module that receives
the downloaded image. Setting value 0 applies to all SP
modules."
::= { snAgentGbl 57 }
snAgTrapHoldTime OBJECT-TYPE
SYNTAX INTEGER (1..600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time in seconds for which traps will be witheld
during system initialization."
::= { snAgentGbl 58 }
snAgSFlowSourceInterface OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Use the ifIndex value here to specify the
source interface to be used for sFlow packets.
The interface should have IP address configured
on it. Value of 0 indicates that source interface
has not been configured for sFlow. Port 65534
is used to specify a null port."
::= { snAgentGbl 59 }
snAgGblTelnetLoginTimeout OBJECT-TYPE
SYNTAX INTEGER (1..10)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Telnet session login timeout value in minutes. Default is 1 minute."
::= { snAgentGbl 60 }
snAgGblBannerExec OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"EXEC process creation banner. Insert newlines using '\n' within the string."
::= { snAgentGbl 61 }
snAgGblBannerIncoming OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Incoming terminal line banner. Insert newlines using '\n' within the string."
::= { snAgentGbl 62 }
snAgGblBannerMotd OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Message-of-the-day banner. Insert newlines using '\n' within the string."
::= { snAgentGbl 63 }
-- Agent Board Table
snAgentBrdTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnAgentBrdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of each physical board information."
::= { snAgentBrd 1 }
snAgentBrdEntry OBJECT-TYPE
SYNTAX SnAgentBrdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the Agent Board table."
INDEX { snAgentBrdIndex }
::= { snAgentBrdTable 1 }
SnAgentBrdEntry ::= SEQUENCE {
snAgentBrdIndex
INTEGER,
snAgentBrdMainBrdDescription
DisplayString,
snAgentBrdMainBrdId
OCTET STRING,
snAgentBrdMainPortTotal
INTEGER,
snAgentBrdExpBrdDescription
DisplayString,
snAgentBrdExpBrdId
OCTET STRING,
snAgentBrdExpPortTotal
INTEGER,
snAgentBrdStatusLeds
INTEGER,
snAgentBrdTrafficLeds
INTEGER,
snAgentBrdMediaLeds
INTEGER,
snAgentBrdSpeedLeds
INTEGER,
snAgentBrdModuleStatus
INTEGER,
snAgentBrdRedundantStatus
INTEGER,
snAgentBrdAlarmLeds
INTEGER,
snAgentBrdTxTrafficLeds
INTEGER,
snAgentBrdRxTrafficLeds
INTEGER,
snAgentBrdStatusLedString
OCTET STRING,
snAgentBrdTrafficLedString
OCTET STRING,
snAgentBrdMediaLedString
OCTET STRING,
snAgentBrdSpeedLedString
OCTET STRING,
snAgentBrdAlarmLedString
OCTET STRING,
snAgentBrdTxTrafficLedString
OCTET STRING,
snAgentBrdRxTrafficLedString
OCTET STRING
}
snAgentBrdIndex OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Agent Interface Table."
::= { snAgentBrdEntry 1 }
snAgentBrdMainBrdDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The main board description string."
::= { snAgentBrdEntry 2 }
snAgentBrdMainBrdId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The main board identifier, which can uniquely identify a board
type. It is an encoded octet string with the following meaning:
octet 0 - octet string format version, which identifies the
format of this string.
If format version octet has the value 2, the octets after the
version octet have the following meaning:
octet 1 - product type:
BI_WG 0x57
BI_BB 0x42
BI_NI 0x4E
NI_M4 0x4D
BI_SLB 0x53
octet 2 - module type:
MASTER_FIBER_8G 0x0
MASTER_FIBER_4G 0x1
MASTER_COPPER_16 0x2
SLAVE_FIBER_4G 0x3
FI_MASTER_FIBER_2G 0x4
FI_MASTER_FIBER_4G 0x5
MASTER_COPPER_8G 0x6
FI_MASTER_FIBER_8G 0x7
SLAVE_FIBER_8G 0x8
MASTER_COPPER_12_2 0x9
SLAVE_COPPER_24 0xA
FI_SLAVE_COPPER_24 0xB
SLAVE_100FX_8 0xD
SLAVE_100FX_16 0xC
SLAVE_COPPER_8G 0xE
SLAVE_COPPER_16_2 0xF
STACK_FIBER_8G 0x10
STACK_COPPER_8G 0x11
MASTER_FIBER_2G 0x12
SLAVE_100FX_24 0x13
MASTER_FIBER_0G 0x14
POS_622M 0x15
POS_155M 0x16
SLAVE_FIBER_2G 0x17
SLAVE_COPPER_2G 0x18
FI_SLAVE_FIBER_2G 0x19
FI_SLAVE_FIBER_4G 0x1A
FI_SLAVE_FIBER_8G 0x1B
FI_SLAVE_COPPER_8G 0x1C
FI_MASTER_COPPER_8G 0x1D
POS_155M2P 0x1E
FI_MASTER_COPPER_4G 0x1F
FI_MASTER_COPPER_2G 0x20
MASTER_COPPER_4G 0x21
MASTER_COPPER_2G 0x22
MASTER_M4_8G 0x23
MASTER_M4_4G 0x24
MASTER_M4_2G 0x25
MASTER_M4_0G 0x26
MASTER_M5_0G 0x27
POS_2488M 0x28
SLAVE_M5_0G 0x29
POS_N2488M 0x2A
STACK_IPC_48_2 0x2B
SLAVE_NPA_FIBER_4G 0x2C
ATM_2PORT 0x2D
ATM_4PORT 0x2E
SLAVE_FIBER_10G 0x2F
SLAVE_JC_48E 0xC3
SLAVE_JC_48T 0xC4
MASTER_JC_M4_8G 0xC5
SLAVE_JC_8G 0xC6
SLAVE_JC_B16GF 0xC8
MASTER_JC_B2404 0xC9
SLAVE_JC_B16GC 0xCA
SLAVE_JC_B24FX 0xCE
octet 3 - processor type, PVR_M603=3, PVR_M604=4, PVR_M603E=6,
PVR_M603EV=7, PVR_M750=8, PVR_M604E=9
octet 4 to
octet 5 - processor speed in MHz
octet 6 - MAC type:
MAC_NONE=0
MAC_SEEQ_10_100=1,
MAC_DEC_10_100=2,
MAC_3COM_10_100=3,
MAC_X10GMAC_10000=4,
MAC_SEEQ_1000=5,
MAC_GMAC_1000=6,
MAC_VLSI_1000=7,
octet 7 - PHY type, PHY_NONE=0, PHY_QSI=1, PHY_BROADCOM=2,
PHY_ICS=3, PHY_NATIONAL=4, PHY_LEVEL1=6,
PHY_BROADCOM_10_100=7, PHY_LEVEL24=8,
PHY_BROADCOM_10000=9
octet 8 - port type, COPPER=0, FIBER=1
octet 9 - fiber port type, NONFIBER=0, SX_FIBER=1,
LX_FIBER=2, LHX_FIBER=3
octet 10 to
octet 13 - DRAM size in KBytes
octet 14 to
octet 17 - boot flash size in KBytes
octet 18 to
octet 21 - code flash size in KBytes
octet 22 to
octet 27 - serial number.
octet 28 - chassis backplane type.
chassis4000 = 0x00
chassis8000 = 0x04
chassis15000 = 0x05
Turbo8 = 0x07 (stack2)
FastIron2 = 0x06 (stack1)"
::= { snAgentBrdEntry 3 }
snAgentBrdMainPortTotal OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ports for the main board."
::= { snAgentBrdEntry 4 }
snAgentBrdExpBrdDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The expansion board description string. Expansion
board are those boards attaching on the main board."
::= { snAgentBrdEntry 5 }
snAgentBrdExpBrdId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The expansion board identifier. Expansion board are those
boards attaching on the main board. It is an encoded octet
string with the following meaning:
octet 0 - octet string format version, which identifies
the format of this string.
If format version octet has the value 1, the octets after
the version octet have the following meaning:
octet 1 - expansion board type, HUNDRED_MEG_1PORT=1,
HUNDRED_MEG_2PORT=2, HUNDRED_MEG_1PORT_COPPER=3,
HUNDRED_MEG_2PORT_COPPER=4, HUNDRED_MEG_2PORT_LX=5,
GIGA_1PORT=8, GIGA_2PORT=9
octet 2 - fiber port type, NONFIBER=0, SX_FIBER=1,
LX_FIBER=2, LHX_FIBER=3, LX_SX_FIBER=4, LHB_FIBER=5"
::= { snAgentBrdEntry 6 }
snAgentBrdExpPortTotal OBJECT-TYPE
SYNTAX INTEGER (1..24)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ports for the expansion board."
::= { snAgentBrdEntry 7 }
snAgentBrdStatusLeds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"A bit array that contains the value of the
front panel status LEDs. This is a bit-map;
each LED is encoded into 1 bit for each switch
port. The maximum number of ports in one chassis
is 32 that means 32 Ports Status LEDs. The expansion port
number always begins from the last main port number.
The following shows the meaning of each bit for each
switch port:
bit value meaning
-------- ---------
0 off (Link off)
1 on (Link on)
The bitmap of LEDs are as following:
(Port1) (Port4) (Port8)
Bit (Bit0) (Bit3) (Bit7)
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
(It was obsoleted after release 07100, replaced by snAgentBrdStatusLedString)"
::= { snAgentBrdEntry 8 }
snAgentBrdTrafficLeds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"A bit array that contains the value of the
front panel traffic LEDs. This is a packed bit string;
each LED is encoded into 1 bit for each switch
port. The maximum number of ports in one chassis
is 24 that means 24 Ports Traffic LEDs. The expansion port
number always begins from the last main port number.
The following shows the meaning of each bit for each
switch port:
bit value meaning
-------- ---------
0 off (no traffic)
1 on (traffic)
The bitmap of LEDs are as following:
(Port1) (Port4) (Port8)
Bit (Bit0) (Bit3) (Bit7)
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
(It was obsoleted after release 07100, replaced by snAgentBrdTrafficLedString)"
::= { snAgentBrdEntry 9 }
snAgentBrdMediaLeds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"A bit array that contains the value of the
front panel media LEDs. This is a packed bit string;
each LED is encoded into 1 bit for each switch port.
The maximum number of ports in one chassis is 24
that means 24 Ports Media LEDs. The expansion port
number always begins from the last main port number.
The following shows the meaning of each bit for each
switch port:
bit value meaning
--------- -------
0 half duplex
1 full duplex
The bitmap of LEDs are as following:
(Port1) (Port4) (Port8)
Bit (Bit0) (Bit3) (Bit7)
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
(It was obsoleted after release 07100, replaced by snAgentBrdMediaLedString)"
::= { snAgentBrdEntry 10 }
snAgentBrdSpeedLeds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"A bit array that contains the value of the
front panel media LEDs. This is a packed bit string;
each LED is encoded into 1 bit for each switch port.
The maximum number of ports in one chassis is 24
that means 24 Ports Speed LEDs. The expansion port
number always begins from the last main port number.
The following shows the meaning of each bit for each
switch port:
bit value meaning
--------- -------
0 10 MBit
1 100 MBit
The bitmap of LEDs are as following:
(Port1) (Port4) (Port8)
Bit (Bit0) (Bit3) (Bit7)
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
(It was obsoleted after release 07100, replaced by snAgentBrdSpeedLedString)"
::= { snAgentBrdEntry 11 }
snAgentBrdModuleStatus OBJECT-TYPE
SYNTAX INTEGER {
moduleEmpty(0),
moduleGoingDown(2),
moduleRejected(3),
moduleBad(4),
moduleComingUp(9),
moduleRunning(10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"By default, this mode is set to notActivated(0).
moduleEmpty(0) ......... The slot of the chassis is empty.
moduleGoingDown(2) ..... The module is going down.
moduleRejected(3) ...... The module is being rejected due to wrong configuration.
moduleBad(4) ........... The module Hardware is bad.
moduleComingUp(9) ...... The module is in power-up cycle.
moduleRunning(10) ....... The module is running."
::= { snAgentBrdEntry 12 }
snAgentBrdRedundantStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
active(2),
standby(3),
crashed(4),
comingUp(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The redundant status of a module. Non-management module always
returns other(1). Management module returns the rest of the
states."
::= { snAgentBrdEntry 13 }
snAgentBrdAlarmLeds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"A bit array that contains the value of the
front panel media LEDs (for POS Module Only). This is a packed bit string;
each LED is encoded into 1 bit for each switch port.
The maximum number of ports in one chassis is 24
that means 24 Ports Speed LEDs. The expansion port
number always begins from the last main port number.
The following shows the meaning of each bit for each
switch port:
bit value meaning
--------- -------
0 no alarm
1 alarm
The bitmap of LEDs are as following:
(Port1) (Port4) (Port8)
Bit (Bit0) (Bit3) (Bit7)
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
(It was obsoleted after release 07100, replaced by snAgentBrdAlarmLedString)"
::= { snAgentBrdEntry 14 }
snAgentBrdTxTrafficLeds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"A bit array that contains the value of the
front panel transmit traffic LEDs (for POS Module Only). This is a packed bit string;
each LED is encoded into 1 bit for each switch
port. The maximum number of ports in one chassis
is 24 that means 24 Ports Transmit Traffic LEDs. The expansion port
number always begins from the last main port number.
The following shows the meaning of each bit for each
switch port:
bit value meaning
-------- ---------
0 off (no transmit traffic)
1 on (transmit traffic)
The bitmap of LEDs are as following:
(Port1) (Port4) (Port8)
Bit (Bit0) (Bit3) (Bit7)
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
(It was obsoleted after release 07100, replaced by snAgentBrdTxTrafficLedString)"
::= { snAgentBrdEntry 15 }
snAgentBrdRxTrafficLeds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"A bit array that contains the value of the
front panel receive traffic LEDs (for POS Module Only). This is a packed bit string;
each LED is encoded into 1 bit for each switch
port. The maximum number of ports in one chassis
is 24 that means 24 Ports Receive Traffic LEDs. The expansion port
number always begins from the last main port number.
The following shows the meaning of each bit for each
switch port:
bit value meaning
-------- ---------
0 off (no receive traffic)
1 on (receive traffic)
The bitmap of LEDs are as following:
(Port1) (Port4) (Port8)
Bit (Bit0) (Bit3) (Bit7)
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
(It was obsoleted after release 07100, replaced by snAgentBrdRxTrafficLedString)"
::= { snAgentBrdEntry 16 }
snAgentBrdStatusLedString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A bit array that contains the value of the
front panel status LEDs. This is a bit-map;
each LED is encoded into 1 bit for each switch
port. The following shows the meaning of each
bit for each switch port:
bit value meaning
-------- ---------
0 off (Link off)
1 on (Link on)
The bitmap of LEDs are as following:
(Port1) (Port4) (Port8)
Bit (Bit0) (Bit3) (Bit7)
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
--------"
::= { snAgentBrdEntry 17 }
snAgentBrdTrafficLedString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A bit array that contains the value of the
front panel traffic LEDs. This is a packed bit string;
each LED is encoded into 1 bit for each switch
port. The following shows the meaning of each
bit for each switch port:
bit value meaning
-------- ---------
0 off (no traffic)
1 on (traffic)
The bitmap of LEDs are as following:
(Port1) (Port4) (Port8)
Bit (Bit0) (Bit3) (Bit7)
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
--------"
::= { snAgentBrdEntry 18 }
snAgentBrdMediaLedString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A bit array that contains the value of the
front panel media LEDs. This is a packed bit string;
each LED is encoded into 1 bit for each switch port.
The following shows the meaning of each bit for each
switch port:
bit value meaning
--------- -------
0 half duplex
1 full duplex
The bitmap of LEDs are as following:
(Port1) (Port4) (Port8)
Bit (Bit0) (Bit3) (Bit7)
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
---------"
::= { snAgentBrdEntry 19 }
snAgentBrdSpeedLedString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A bit array that contains the value of the
front panel media LEDs. This is a packed bit string;
each LED is encoded into 1 bit for each switch port.
The following shows the meaning of each bit for each
switch port:
bit value meaning
--------- -------
0 10 MBit
1 100 MBit
The bitmap of LEDs are as following:
(Port1) (Port4) (Port8)
Bit (Bit0) (Bit3) (Bit7)
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
---------"
::= { snAgentBrdEntry 20 }
snAgentBrdAlarmLedString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A bit array that contains the value of the
front panel media LEDs (for POS Module Only).
This is a packed bit string; each LED is encoded
into 1 bit for each switch port. The following
shows the meaning of each bit for each switch port:
bit value meaning
--------- -------
0 no alarm
1 alarm
The bitmap of LEDs are as following:
(Port1) (Port4) (Port8)
Bit (Bit0) (Bit3) (Bit7)
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
---------"
::= { snAgentBrdEntry 21 }
snAgentBrdTxTrafficLedString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A bit array that contains the value of the
front panel transmit traffic LEDs (for POS Module Only).
This is a packed bit string; each LED is encoded into
1 bit for each switch port. The following shows the
meaning of each bit for each switch port:
bit value meaning
-------- ---------
0 off (no transmit traffic)
1 on (transmit traffic)
The bitmap of LEDs are as following:
(Port1) (Port4) (Port8)
Bit (Bit0) (Bit3) (Bit7)
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
--------"
::= { snAgentBrdEntry 22 }
snAgentBrdRxTrafficLedString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A bit array that contains the value of the
front panel receive traffic LEDs (for POS Module Only).
This is a packed bit string; each LED is encoded into
1 bit for each switch port. The following shows the
meaning of each bit for each switch port:
bit value meaning
-------- ---------
0 off (no receive traffic)
1 on (receive traffic)
The bitmap of LEDs are as following:
(Port1) (Port4) (Port8)
Bit (Bit0) (Bit3) (Bit7)
Byte 1: LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8
Byte 2: LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16
Byte 3: LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24
--------"
::= { snAgentBrdEntry 23 }
-- Trap Receiver Table
snAgTrpRcvrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnAgTrpRcvrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of managers which to send traps."
::= { snAgentTrp 1 }
snAgTrpRcvrEntry OBJECT-TYPE
SYNTAX SnAgTrpRcvrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the trap receiver table.
The column snAgTrpRcvrStatus is used to create
and delete rows in the table. Creation requires
a SET PDU with objects snAgTrpRcvrIndex,
snAgTrpRcvrIpAddr, snAgTrpRcvrComm and
snAgTrpRcvrStatus."
INDEX { snAgTrpRcvrIndex }
::= { snAgTrpRcvrTable 1 }
SnAgTrpRcvrEntry ::= SEQUENCE {
snAgTrpRcvrIndex
INTEGER,
snAgTrpRcvrIpAddr
IpAddress,
snAgTrpRcvrComm
OCTET STRING,
snAgTrpRcvrStatus
INTEGER,
snAgTrpRcvrUDPPort
INTEGER
}
snAgTrpRcvrIndex OBJECT-TYPE
SYNTAX INTEGER (1..10)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Trap Receiver Table."
::= { snAgTrpRcvrEntry 1 }
snAgTrpRcvrIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ip address for
SNMP manager that is to receive the trap."
::= { snAgTrpRcvrEntry 2 }
snAgTrpRcvrComm OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Community string to use."
::= { snAgTrpRcvrEntry 3 }
snAgTrpRcvrStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4),
ignore(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete rows in the table and control
if they are used. The values
that can be written are:
ignore(5)...don't use this entry to
send traps to at this time
delete(3)...deletes the row
create(4)...creates a new row
If the row exists, then a SET with
value of create(5) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
other(1)....some other case
valid(2)....the row exists and is valid
ignore(5)...don't use this entry to
send traps to at this time"
::= { snAgTrpRcvrEntry 4 }
snAgTrpRcvrUDPPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"UDP port number of the trap receiver."
DEFVAL { 162 }
::= { snAgTrpRcvrEntry 5 }
-- Boot Sequence Table
snAgBootSeqTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnAgBootSeqEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of image load sequnce instructions to the boot code.
Boot code will start from instruction of the first valid entry
to load the image. If failed, it will use the second valid
entry and so on, until a succesful load has completed. Each
entry must have an unique instruction, duplicate instructions
will be rejected."
::= { snAgentBoot 1 }
snAgBootSeqEntry OBJECT-TYPE
SYNTAX SnAgBootSeqEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the boot sequence table."
INDEX { snAgBootSeqIndex }
::= { snAgBootSeqTable 1 }
SnAgBootSeqEntry ::= SEQUENCE {
snAgBootSeqIndex
INTEGER,
snAgBootSeqInstruction
INTEGER,
snAgBootSeqIpAddr
IpAddress,
snAgBootSeqFilename
DisplayString,
snAgBootSeqRowStatus
INTEGER
}
snAgBootSeqIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the boot sequence table."
::= { snAgBootSeqEntry 1 }
snAgBootSeqInstruction OBJECT-TYPE
SYNTAX INTEGER {
fromPrimaryFlash(1),
fromSecondaryFlash(2),
fromTftpServer(3),
fromBootpServer(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The instruction for the boot code."
::= { snAgBootSeqEntry 2 }
snAgBootSeqIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ip address of the TFTP server if snAgBootSeqInstruction
was set to 'fromTftpServer'; otherwise, this object is not
used in any other boot instruction."
::= { snAgBootSeqEntry 3 }
snAgBootSeqFilename OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The image filename on the TFTP server if snAgBootSeqInstruction
was set to 'fromTftpServer'; otherwise, this object is not
used in any other boot instruction."
::= { snAgBootSeqEntry 4 }
snAgBootSeqRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a boot sequence table entry."
::= { snAgBootSeqEntry 5 }
--- Encoded Octet Strings for the Configuration File Transfer
snAgCfgEosTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnAgCfgEosEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table represents the fragmented Configuration File data packet
with checksum include in each rows of this table. A SNMP-SET
represents configuration file download, and a SNMP-GET represents
configuration file upload. This action is only if the SNMP-SET of
snAgCfgLoad command is sent along with this table consecutively. The
applicable snAgCfgLoad command value is as followings:
uploadFromFlashToNMS(23),
downloadToFlashFromNMS(24),
uploadFromDramToNMS(25),
downloadToDramFromNMS(26)."
::= { snAgCfgEos 1 }
snAgCfgEosEntry OBJECT-TYPE
SYNTAX SnAgCfgEosEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An EOS row in the table of encoded octet strings for table
snAgCfgEosTable. "
INDEX { snAgCfgEosIndex }
::= { snAgCfgEosTable 1 }
SnAgCfgEosEntry ::=
SEQUENCE {
snAgCfgEosIndex
INTEGER,
snAgCfgEosPacket
OCTET STRING,
snAgCfgEosChkSum
INTEGER
}
snAgCfgEosIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Each VLAN EOS Buffer Identifier have a multiple
VLAN table entries."
::= { snAgCfgEosEntry 1 }
snAgCfgEosPacket OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1000))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An encoded octet string. On reads it contains an integral
number of configuration file data packets. The size
of each encoded octet string is less than or equal to 1400
bytes."
::= { snAgCfgEosEntry 2 }
snAgCfgEosChkSum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A checksum of each configuration file data packet."
::= { snAgCfgEosEntry 3 }
-- Stackable Management Group
snStackGen OBJECT IDENTIFIER ::= { snStack 1 }
snStackSecSwitchInfo OBJECT IDENTIFIER ::= { snStack 2 }
-- MIB Objects
-- General Stackable Management Information
snStackPriSwitchMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Stackable Management Primary Switch mode
either enabled or disabled and the default is
disabled mode.
enabled(1)...........primary switch enabled
disabled(0)..........primary switch disabled"
::= { snStackGen 1 }
snStackMaxSecSwitch OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Maximum Secondary Switches are allowed in the
Stackable Management Group."
::= { snStackGen 2 }
snStackTotalSecSwitch OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Total Secondary Switches currently connected to the
Stackable Management Group."
::= { snStackGen 3 }
snStackSyncAllSecSwitch OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
invalid(1),
device(2),
global(3),
local(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Synchronize all the secondary switches in the
Stackable Management Group with the following commands.
device(2)...........device related parameters.
global(3)...........global parameters.
local(4)............local parameters.
The return result of the above commands are either
normal(0)...........normal condition.
invalid(1)...........invalid result."
::= { snStackGen 4 }
snStackSmSlotIndex OBJECT-TYPE
SYNTAX INTEGER (0..8)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Slot 0 is the Master slot and Slot 1-8 are slaves.
All the slot-based MIB data can be retrieved with respect to
this slot index such as snChassis global MIB. "
::= { snStackGen 5 }
snStackFmpSetProcess OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
pending(1),
failure(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"normal(0) - The set process is either in an idle state or FMP-SET-SUCCESS state.
pending(1) - The pending process is waiting for the result of an FMP-SET.
failure(2) - The failure result of an FMP-SET."
::= { snStackGen 6 }
-- Stackable Management Secondary Switch Information Table
snStackSecSwitchTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnStackSecSwitchEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"If snSwGroupOperMode is configured as basic mode
which is VLAN by Port, Layer2 switching,
then this table is valid. Each VLAN switch port
could have a number of VLAN IDs."
::= { snStackSecSwitchInfo 1 }
snStackSecSwitchEntry OBJECT-TYPE
SYNTAX SnStackSecSwitchEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Stackable Management Secondary Switch
Information table."
INDEX {
snStackSecSwitchIndex
}
::= { snStackSecSwitchTable 1 }
SnStackSecSwitchEntry ::= SEQUENCE {
snStackSecSwitchIndex
INTEGER,
snStackSecSwitchSlotId
INTEGER,
snStackSecSwitchPortCnts
INTEGER,
snStackSecSwitchEnabled
INTEGER,
snStackSecSwitchAck
INTEGER,
snStackSecSwitchMacAddr
MacAddress,
snStackSecSwitchSyncCmd
INTEGER,
snStackSecSwitchIpAddr
IpAddress,
snStackSecSwitchSubnetMask
IpAddress,
snStackSecSwitchCfgCmd
INTEGER
}
snStackSecSwitchIndex OBJECT-TYPE
SYNTAX INTEGER (1..26)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The secondary switch index must not be greater than the snStackMaxSecSwitch."
::= { snStackSecSwitchEntry 1 }
snStackSecSwitchSlotId OBJECT-TYPE
SYNTAX INTEGER (1..26)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The secondary switch slot ID must be set before the Configuration
command sent from the primary switch to the secondary switch
either manually or automatically - snStackSecSwitchCfgCmd."
::= { snStackSecSwitchEntry 2 }
snStackSecSwitchPortCnts OBJECT-TYPE
SYNTAX INTEGER (1..26)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of ports in this secondary switch."
::= { snStackSecSwitchEntry 3 }
snStackSecSwitchEnabled OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The secondary switch has been selected to Stackable Management Group."
::= { snStackSecSwitchEntry 4 }
snStackSecSwitchAck OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The secondary switch has sent reponse to the primary switch."
::= { snStackSecSwitchEntry 5 }
snStackSecSwitchMacAddr OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The secondary switch physical address. The physical address
represents a MAC Station."
::= { snStackSecSwitchEntry 6 }
snStackSecSwitchSyncCmd OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
invalid(1),
device(2),
global(3),
local(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Synchronize the secondary switches in the
Stackable Management Group with the following commands.
device(2)...........device related parameters.
global(3)...........global parameters.
local(4)............local parameters.
The return result of the above commands are either
normal(0)...........normal condition.
invalid(1)...........invalid result."
::= { snStackSecSwitchEntry 7 }
snStackSecSwitchIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The secondary switch IP Address and is used for
manual-command of snStackSecSwitchCfgCmd."
::= { snStackSecSwitchEntry 8 }
snStackSecSwitchSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The secondary switch IP Subnet Mask and is used for
manual-command of snStackSecSwitchCfgCmd."
::= { snStackSecSwitchEntry 9 }
snStackSecSwitchCfgCmd OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
invalid(1),
auto(2),
manual(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"snStackSecSwitchSlotId must be set before the Configuration
command sent from the primary switch to the secondary switch
either manually or automatically.
auto(2)...........auto-configuration command sent.
manual(3).........manual-configuration command sent.
if manual-mode is used, snStackSecSwitchIpAddr
and snStackSecSwitchSubnetMask must be
first set before this command is sent.
The return result of the above commands are either
normal(0)...........normal condition.
invalid(1)..........invalid result."
::= { snStackSecSwitchEntry 10 }
-- System Logging Group
snAgSysLogGbl OBJECT IDENTIFIER ::= { snAgentLog 1 }
snAgSysLogGblEnable OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable system logging."
DEFVAL { enabled }
::= { snAgSysLogGbl 1 }
snAgSysLogGblBufferSize OBJECT-TYPE
SYNTAX INTEGER (1..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of dynamic system logging entries."
DEFVAL { 50 }
::= { snAgSysLogGbl 2 }
snAgSysLogGblClear OBJECT-TYPE
SYNTAX INTEGER { normal(0), clearAll(1), clearDynamic(2), clearStatic(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clear dynamic and/or static system logging buffers."
::= { snAgSysLogGbl 3 }
snAgSysLogGblCriticalLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Filter events going to the logging buffer. This is a packed
bit string object of which each bit has the following meaning:
(bit 0 is the least significant bit).
bit position meaning
------------ -------
8-31 reserved
7 Warning (warning conditions)
6 Notification (normal but significant conditions)
5 Informational (informational messages)
4 Error (error conditions)
3 Emergency (system is unusable)
2 Debugging (debugging messages)
1 Critical (critical conditions)
0 Alert (immediate action needed)
Setting a critical level bit to 1 makes the logging buffer
accept the corresponding event. Resetting a critical level
bit to 0 makes the logging buffer reject the corresponding
event."
DEFVAL { 255 }
::= { snAgSysLogGbl 4 }
snAgSysLogGblLoggedCount OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number events logged in the system logging buffer."
::= { snAgSysLogGbl 5 }
snAgSysLogGblDroppedCount OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of events dropped."
::= { snAgSysLogGbl 6 }
snAgSysLogGblFlushedCount OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times that the system logging buffer was cleared."
::= { snAgSysLogGbl 7 }
snAgSysLogGblOverrunCount OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times that the system logging buffer was wrapped
around."
::= { snAgSysLogGbl 8 }
snAgSysLogGblServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS deprecated
DESCRIPTION
"IP address of syslog server."
::= { snAgSysLogGbl 9 }
snAgSysLogGblFacility OBJECT-TYPE
SYNTAX INTEGER {
kern(1),
user(2),
mail(3),
daemon(4),
auth(5),
syslog(6),
lpr(7),
news(8),
uucp(9),
sys9(10),
sys10(11),
sys11(12),
sys12(13),
sys13(14),
sys14(15),
cron(16),
local0(17),
local1(18),
local2(19),
local3(20),
local4(21),
local5(22),
local6(23),
local7(24)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Facility code."
DEFVAL { user }
::= { snAgSysLogGbl 10 }
-- Dynamic System Logging Buffer Table
snAgSysLogBufferTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnAgSysLogBufferEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Dynamic system logging buffer table."
::= { snAgentLog 2 }
snAgSysLogBufferEntry OBJECT-TYPE
SYNTAX SnAgSysLogBufferEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the dynamic system logging buffer table."
INDEX { snAgSysLogBufferIndex }
::= { snAgSysLogBufferTable 1 }
SnAgSysLogBufferEntry ::= SEQUENCE {
snAgSysLogBufferIndex
INTEGER,
snAgSysLogBufferTimeStamp
TimeTicks,
snAgSysLogBufferCriticalLevel
INTEGER,
snAgSysLogBufferMessage
DisplayString,
snAgSysLogBufferCalTimeStamp
DisplayString
}
snAgSysLogBufferIndex OBJECT-TYPE
SYNTAX INTEGER (1..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the dynamic system logging buffer table."
::= { snAgSysLogBufferEntry 1 }
snAgSysLogBufferTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A time stamp when the event is logged."
::= { snAgSysLogBufferEntry 2 }
snAgSysLogBufferCriticalLevel OBJECT-TYPE
SYNTAX INTEGER {
other(1),
alert(2),
critical(3),
debugging(4),
emergency(5),
error(6),
informational(7),
notification(8),
warning(9) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The critical level of this event."
::= { snAgSysLogBufferEntry 3 }
snAgSysLogBufferMessage OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system logging message."
::= { snAgSysLogBufferEntry 4 }
snAgSysLogBufferCalTimeStamp OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A time stamp when the event is logged. This object returns
a NULL terminated time stamp string if the system calendar
time was set. It returns a zero length string if the system
calendar time was not set."
::= { snAgSysLogBufferEntry 5 }
-- Static System Logging Buffer Table
snAgStaticSysLogBufferTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnAgStaticSysLogBufferEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Static system logging buffer table."
::= { snAgentLog 3 }
snAgStaticSysLogBufferEntry OBJECT-TYPE
SYNTAX SnAgStaticSysLogBufferEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the static system logging buffer table."
INDEX { snAgStaticSysLogBufferIndex }
::= { snAgStaticSysLogBufferTable 1 }
SnAgStaticSysLogBufferEntry ::= SEQUENCE {
snAgStaticSysLogBufferIndex
INTEGER,
snAgStaticSysLogBufferTimeStamp
TimeTicks,
snAgStaticSysLogBufferCriticalLevel
INTEGER,
snAgStaticSysLogBufferMessage
DisplayString,
snAgStaticSysLogBufferCalTimeStamp
DisplayString
}
snAgStaticSysLogBufferIndex OBJECT-TYPE
SYNTAX INTEGER (1..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the static system logging buffer table."
::= { snAgStaticSysLogBufferEntry 1 }
snAgStaticSysLogBufferTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A time stamp when the event is logged."
::= { snAgStaticSysLogBufferEntry 2 }
snAgStaticSysLogBufferCriticalLevel OBJECT-TYPE
SYNTAX INTEGER {
other(1),
alert(2),
critical(3),
debugging(4),
emergency(5),
error(6),
informational(7),
notification(8),
warning(9) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The critical level of this event."
::= { snAgStaticSysLogBufferEntry 3 }
snAgStaticSysLogBufferMessage OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system logging message."
::= { snAgStaticSysLogBufferEntry 4 }
snAgStaticSysLogBufferCalTimeStamp OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A time stamp when the event is logged. This object returns
a NULL terminated time stamp string if the system calendar
time was set. It returns a zero length string if the system
calendar time was not set."
::= { snAgStaticSysLogBufferEntry 5 }
-- SysLog Server Table
snAgSysLogServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnAgSysLogServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"System Log Server table."
::= { snAgentLog 4 }
snAgSysLogServerEntry OBJECT-TYPE
SYNTAX SnAgSysLogServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the SysLog Server table."
INDEX {snAgSysLogServerIP, snAgSysLogServerUDPPort}
::= { snAgSysLogServerTable 1 }
SnAgSysLogServerEntry ::= SEQUENCE {
snAgSysLogServerIP
IpAddress,
snAgSysLogServerUDPPort
INTEGER,
snAgSysLogServerRowStatus
INTEGER
}
snAgSysLogServerIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP address of syslog server."
::= { snAgSysLogServerEntry 1 }
snAgSysLogServerUDPPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"UDP port number of syslog server."
::= { snAgSysLogServerEntry 2 }
snAgSysLogServerRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
other(1)....some other case
valid(2)....the row exists and is valid"
::= { snAgSysLogServerEntry 3 }
-- Agent System Parameters Configuration Table
snAgentSysParaConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnAgentSysParaConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of Agent of each board."
::= { snAgentSysParaConfig 1 }
snAgentSysParaConfigEntry OBJECT-TYPE
SYNTAX SnAgentSysParaConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the Agent System Parameters Configuation table."
INDEX { snAgentSysParaConfigIndex }
::= { snAgentSysParaConfigTable 1 }
SnAgentSysParaConfigEntry ::= SEQUENCE {
snAgentSysParaConfigIndex
INTEGER,
snAgentSysParaConfigDescription
DisplayString,
snAgentSysParaConfigMin
INTEGER,
snAgentSysParaConfigMax
INTEGER,
snAgentSysParaConfigDefault
INTEGER,
snAgentSysParaConfigCurrent
INTEGER
}
snAgentSysParaConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Agent System Parameters Configuation Table."
::= { snAgentSysParaConfigEntry 1 }
snAgentSysParaConfigDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The main board description string."
::= { snAgentSysParaConfigEntry 2 }
snAgentSysParaConfigMin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum value of this Agent System Parameter."
::= { snAgentSysParaConfigEntry 3 }
snAgentSysParaConfigMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum value of this Agent System Parameter."
::= { snAgentSysParaConfigEntry 4 }
snAgentSysParaConfigDefault OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The default value of this Agent System Parameter."
::= { snAgentSysParaConfigEntry 5 }
snAgentSysParaConfigCurrent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The current configurated value of this Agent System Parameter."
::= { snAgentSysParaConfigEntry 6 }
-- Agent Configured Module Table
snAgentConfigModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnAgentConfigModuleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of each configured module information."
::= { snAgentConfigModule 1 }
snAgentConfigModuleEntry OBJECT-TYPE
SYNTAX SnAgentConfigModuleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the Agent Configured Module table."
INDEX { snAgentConfigModuleIndex }
::= { snAgentConfigModuleTable 1 }
SnAgentConfigModuleEntry ::= SEQUENCE {
snAgentConfigModuleIndex
INTEGER,
snAgentConfigModuleType
INTEGER,
snAgentConfigModuleRowStatus
INTEGER,
snAgentConfigModuleDescription
DisplayString,
snAgentConfigModuleOperStatus
DisplayString,
snAgentConfigModuleSerialNumber
DisplayString,
snAgentConfigModuleNumberOfPorts
INTEGER,
snAgentConfigModuleMgmtModuleType
INTEGER,
snAgentConfigModuleNumberOfCpus
INTEGER
}
snAgentConfigModuleIndex OBJECT-TYPE
SYNTAX INTEGER (1..8)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the Agent Configured Module Table."
::= { snAgentConfigModuleEntry 1 }
snAgentConfigModuleType OBJECT-TYPE
SYNTAX INTEGER {
bi8PortGigManagementModule(0),
bi4PortGigManagementModule(1),
bi16PortCopperManagementModule(2),
bi4PortGigModule(3),
fi2PortGigManagementModule(4),
fi4PortGigManagementModule(5),
bi8PortGigCopperManagementModule(6),
fi8PortGigManagementModule(7),
bi8PortGigModule(8),
bi24PortCopperModule(10),
fi24PortCopperModule(11),
bi16Port100FXModule(12),
bi8Port100FXModule(13),
bi8PortGigCopperModule(14),
bi2PortGigManagementModule(18),
bi24Port100FXModule(19),
bi0PortManagementModule(20),
pos622MbsModule(21),
pos155MbsModule(22),
bi2PortGigModule(23),
bi2PortGigCopperModule(24),
fi2PortGigModule(25),
fi4PortGigModule(26),
fi8PortGigModule(27),
fi8PortGigCopperModule(28),
fi8PortGigCopperManagementModule(29),
pos155Mbs2PModule(30),
fi4PortGigCopperManagementModule(31),
fi2PortGigCopperManagementModule(32),
bi4PortGigCopperManagementModule(33),
bi2PortGigCopperManagementModule(34),
bi8PortGigM4ManagementModule(35),
bi4PortGigM4ManagementModule(36),
bi2PortGigM4ManagementModule(37),
bi0PortGigM4ManagementModule(38),
bi0PortWSMManagementModule(39),
biPos2Port2488MbsModule(40),
bi0PortWSMModule(41),
niPos2Port2488MbsModule(42),
ni4802(43),
bi4PortGigNPAModule(44),
biAtm2Port155MbsModule(45),
biAtm4Port155MbsModule(46),
bi1Port10GigModule(47),
biFiJc48ePort100fxIpcModule(195),
biFiJc48tPort100fxIpcModule(196),
biFiJc8PortGigM4ManagementModule(197),
biFiJc8PortGigIgcModule(198)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Configured Module Type."
::= { snAgentConfigModuleEntry 2 }
snAgentConfigModuleRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a configured module table entry."
::= { snAgentConfigModuleEntry 3 }
snAgentConfigModuleDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A description of the configured module."
::= { snAgentConfigModuleEntry 4 }
snAgentConfigModuleOperStatus OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Module operational status. Zero length string indicates
that physical module has not been inserted to the chassis."
::= { snAgentConfigModuleEntry 5 }
snAgentConfigModuleSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Module serial number. Zero length string indicates that
module serial number EEPROM has not been programmed or
the module does not support serial number EEPROM."
::= { snAgentConfigModuleEntry 6 }
snAgentConfigModuleNumberOfPorts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of ports of module."
::= { snAgentConfigModuleEntry 7 }
snAgentConfigModuleMgmtModuleType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
nonManagementModule(2),
unknownManagementModule(3),
m1ManagementModule(4),
m2ManagementModule(5),
m3ManagementModule(6),
m4ManagementModule(7),
m5ManagementModule(8),
jetcoreStackManagementModule(9) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Management module type."
::= { snAgentConfigModuleEntry 8 }
snAgentConfigModuleNumberOfCpus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of module CPUs."
::= { snAgentConfigModuleEntry 9 }
-- Agent User Access Group
snAgentUserGbl OBJECT IDENTIFIER ::= { snAgentUser 1 }
snAgentUserMaxAccnt OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum number of user account entries can be configured."
::= { snAgentUserGbl 1 }
-- Agent User Account Table
snAgentUserAccntTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnAgentUserAccntEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of user account information."
::= { snAgentUser 2 }
snAgentUserAccntEntry OBJECT-TYPE
SYNTAX SnAgentUserAccntEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the Agent User table."
INDEX { snAgentUserAccntName }
::= { snAgentUserAccntTable 1 }
SnAgentUserAccntEntry ::= SEQUENCE {
snAgentUserAccntName
DisplayString,
snAgentUserAccntPassword
DisplayString,
snAgentUserAccntEncryptCode
INTEGER,
snAgentUserAccntPrivilege
INTEGER,
snAgentUserAccntRowStatus
INTEGER
}
snAgentUserAccntName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..48))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user name."
::= { snAgentUserAccntEntry 1 }
snAgentUserAccntPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..48))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user password."
::= { snAgentUserAccntEntry 2 }
snAgentUserAccntEncryptCode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The password encryption method code."
::= { snAgentUserAccntEntry 3 }
snAgentUserAccntPrivilege OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user privilege."
::= { snAgentUserAccntEntry 4 }
snAgentUserAccntRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4),
modify(5) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a user account table entry."
::= { snAgentUserAccntEntry 5 }
-- Agent Redundant Group
snAgentRedunGbl OBJECT IDENTIFIER ::= { snAgentRedundant 1 }
snAgentRedunActiveMgmtMod OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Slot number of the active management module. Setting
this object does not take effect immediately. Saving
configuration data to flash storage and reboot the
system are required to take effect. Setting a value of 0
requests the system to auto-select an active management
module after power up."
DEFVAL { 0 }
::= { snAgentRedunGbl 1 }
snAgentRedunSyncConfig OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Frequency of the backup management module copying the
configuration data from the active management module.
Each unit is 1 second. Setting a value 0 will disable
the synchronization copy. Setting a negative value will
initiate the synchronization copy once immediately."
DEFVAL { 10 }
::= { snAgentRedunGbl 2 }
snAgentRedunBkupCopyBootCode OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If enabled(1), the backup management module copies the boot code
from the active management module to its boot code flash storage
after power up, and whenever the active management module's boot
code is updated. The backup management module does not copy if
both boot codes were identical."
DEFVAL { disabled }
::= { snAgentRedunGbl 3 }
snAgentEnableMgmtModRedunStateChangeTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the SNMP agent process is permitted to
generate management module redundancy state change traps."
DEFVAL { enabled }
::= { snAgentRedunGbl 4 }
snAgentRedunBkupBootLoad OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
operationError(17),
downloadBackup(20)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action object to down load a new boot code from boot flash storage
of the active management module to the backup management module.
The following are returned values from get operation:
normal(1)............no operation
operationError(17)...error codes
The following are input values from set operation:
downloadBackup(20)...download the boot code from the active
management module to the backup management
module
Any set operation is rejected during loading until error
or normal state is reached."
::= { snAgentRedunGbl 5 }
snAgentRedunSwitchOver OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To force a switch-over from standby to active state
if the backup management module exists in a chassis."
::= { snAgentRedunGbl 6 }
-- System CPU Utilization Table.
snAgentCpuUtilTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnAgentCpuUtilEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table to list utilization for all CPUs in the device."
::= { snAgentCpu 1 }
snAgentCpuUtilEntry OBJECT-TYPE
SYNTAX SnAgentCpuUtilEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the CPU utilization table."
INDEX {
snAgentCpuUtilSlotNum,
snAgentCpuUtilCpuId,
snAgentCpuUtilInterval
}
::= { snAgentCpuUtilTable 1 }
SnAgentCpuUtilEntry ::= SEQUENCE {
snAgentCpuUtilSlotNum
INTEGER,
snAgentCpuUtilCpuId
INTEGER,
snAgentCpuUtilInterval
INTEGER,
snAgentCpuUtilValue
Gauge
}
snAgentCpuUtilSlotNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The slot number of module which contains the cpu."
::= { snAgentCpuUtilEntry 1 }
snAgentCpuUtilCpuId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The id of cpu. For non-VM1/WSM management module, there is one CPU.
For VM1/WSM there's one management CPU and three slave CPUs.
The management CPU could be turned off. For POS and ATM
there's no management CPU but two slave CPUs.
Id for management cpu is 1. Value of 2 or greater are for slave CPUs. "
::= { snAgentCpuUtilEntry 2 }
snAgentCpuUtilInterval OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value, in seconds, for this utilization. For both management and slave CPU, we display
utilization for 1 sec, 5 sec, 60 sec and 300 sec interval."
::= { snAgentCpuUtilEntry 3 }
snAgentCpuUtilValue OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The statistical CPU utilization in units of one-hundredth of a percent."
::= { snAgentCpuUtilEntry 4 }
-- Hardware ICBM (Integrated Central Buffer Manager) Counter Table.
snAgentHwICBMCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnAgentHwICBMCounterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table to list the ICBM counter values.
This table is not supported on 10G module."
::= { snAgentHw 1 }
snAgentHwICBMCounterEntry OBJECT-TYPE
SYNTAX SnAgentHwICBMCounterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row representing ICBM counter values for that slot."
INDEX {
snAgentHwICBMCounterSlot,
snAgentHwICBMCounterDMA
}
::= { snAgentHwICBMCounterTable 1 }
SnAgentHwICBMCounterEntry ::= SEQUENCE {
snAgentHwICBMCounterSlot
Unsigned32,
snAgentHwICBMCounterDMA
Unsigned32,
snAgentHwICBMCounterFreeDepth
Counter,
snAgentHwICBMCounterWriteDrop
Counter,
snAgentHwICBMCounterWriteInput
Counter,
snAgentHwICBMCounterWriteOutput
Counter,
snAgentHwICBMCounterReadInput
Counter,
snAgentHwICBMCounterReadOutput
Counter
}
snAgentHwICBMCounterSlot OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot number where ICBM resides."
::= { snAgentHwICBMCounterEntry 1 }
snAgentHwICBMCounterDMA OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"DMA Id within a slot where ICBM resides. Valid only for Jetcore modules.
For non-Jetcore modules, this index is ignored by the agent. In this case, value
0 will be returned by the agent."
::= { snAgentHwICBMCounterEntry 2 }
snAgentHwICBMCounterFreeDepth OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current depth of the free queue for this ICBM."
::= { snAgentHwICBMCounterEntry 3 }
snAgentHwICBMCounterWriteDrop OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Write sequencer drop count for this ICBM."
::= { snAgentHwICBMCounterEntry 4 }
snAgentHwICBMCounterWriteInput OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Write sequencer input counter for this ICBM."
::= { snAgentHwICBMCounterEntry 5 }
snAgentHwICBMCounterWriteOutput OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Write sequencer output counter for this ICBM."
::= { snAgentHwICBMCounterEntry 6 }
snAgentHwICBMCounterReadInput OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Read sequencer input counter for this ICBM."
::= { snAgentHwICBMCounterEntry 7 }
snAgentHwICBMCounterReadOutput OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Read sequencer output counter for this ICBM."
::= { snAgentHwICBMCounterEntry 8 }
END
HP-SN-SWITCH-GROUP-MIB DEFINITIONS ::= BEGIN
-- Foundry SnSwitch Group MIB Release 2.0.0
-- Revision 0 08/18/96
-- Copyright 1996-97 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry Networks SNMP Management Information Base Specification
-- (Specification) embodies Foundry Networks' confidential and
-- proprietary intellectual property. Foundry Networks retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS," and Foundry Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
-- SECTION 1: Top Level Definitions
-- Imports
IMPORTS
Counter, TimeTicks, IpAddress, Gauge
FROM RFC1155-SMI
Unsigned32
FROM SNMPv2-SMI
OBJECT-TYPE
FROM RFC-1212
snSwitch
FROM HP-SN-ROOT-MIB;
-- textual conventions
DisplayString ::=
OCTET STRING
-- This data type is used to model textual information taken
-- from the NVT ASCII character set. By convention, objects
-- with this syntax are declared as having
--
-- SIZE (0..255)
PhysAddress ::=
OCTET STRING
-- This data type is used to model media addresses. For many
-- types of media, this will be in a binary representation.
-- For example, an ethernet address would be represented as
-- a string of 6 octets.
MacAddress ::=
OCTET STRING (SIZE(6))
-- This data type is used to model media addresses. For many
-- types of media, this will be in a binary representation.
-- For example, an ethernet address would be represented as
-- a string of 6 octets.
BridgeId ::= OCTET STRING (SIZE(8))
-- the Bridge-Identifier as used in the Spanning Tree
Timeout ::= INTEGER -- a STP timer in units of 1/100 seconds
PortMask ::=
INTEGER
-- This data type is used to model port bitmask. The
-- maximum of ports are 32.
InterfaceId ::= OBJECT IDENTIFIER
-- This data type is used to specify an interface ID.
-- The first object identifier is port type, and the
-- format of the rest of the object identifiers depend
-- on the port type.
--
-- ethernet(1), format: type.slot.port
-- e.g. 1.3.6 is port ethernet 3/6
--
-- pos(2), format: type.slot.port
-- e.g. 2.10.1 is port pos 10/1
--
-- atm(3), format: type.slot.port
-- e.g. 3.8.2 is port atm 8/2
--
-- virtual router interface(4), format: type.ve
-- e.g. 4.9 is port ve 9
--
-- loopback(5), format: type.lb
-- e.g. 5.7 is port loopback 7
--
-- gre tunnel(6), format: type.tn, not supported
--
-- subinterface(7), format: type.slot.port.subInterface
-- e.g. 7.3.2.4 is port atm 3/2.4
--
-- mpls tunnel(8), format: type.tn
-- e.g. 8.3 is port tunnel 3
--
-- pvc(9), format: type.slot.port.subInterface.vpi.vci
-- e.g. 9.3.1.2.1.2 is port atm 3/1.2.1.2
-- Groups
snSwInfo OBJECT IDENTIFIER ::= { snSwitch 1 }
snVLanInfo OBJECT IDENTIFIER ::= { snSwitch 2 }
snSwPortInfo OBJECT IDENTIFIER ::= { snSwitch 3 }
snFdbInfo OBJECT IDENTIFIER ::= { snSwitch 4 }
snPortStpInfo OBJECT IDENTIFIER ::= { snSwitch 5 }
snTrunkInfo OBJECT IDENTIFIER ::= { snSwitch 6 }
snSwSummary OBJECT IDENTIFIER ::= { snSwitch 7 }
snDhcpGatewayListInfo OBJECT IDENTIFIER ::= { snSwitch 8 }
snDnsInfo OBJECT IDENTIFIER ::= { snSwitch 9 }
snMacFilter OBJECT IDENTIFIER ::= { snSwitch 10 }
snNTP OBJECT IDENTIFIER ::= { snSwitch 11 }
snRadius OBJECT IDENTIFIER ::= { snSwitch 12 }
snTacacs OBJECT IDENTIFIER ::= { snSwitch 13 }
snQos OBJECT IDENTIFIER ::= { snSwitch 14 }
snAAA OBJECT IDENTIFIER ::= { snSwitch 15 }
snCAR OBJECT IDENTIFIER ::= { snSwitch 16 }
snVLanCAR OBJECT IDENTIFIER ::= { snSwitch 17 }
snNetFlow OBJECT IDENTIFIER ::= { snSwitch 18 }
snSFlow OBJECT IDENTIFIER ::= { snSwitch 19 }
snFDP OBJECT IDENTIFIER ::= { snSwitch 20 }
snVsrp OBJECT IDENTIFIER ::= { snSwitch 21 }
-- SECTION 2: Switch Group Configuration MIBs
snSwGroupOperMode OBJECT-TYPE
SYNTAX INTEGER {
noVLan(1),
vlanByPort(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"noVLan(1) represents all switch ports with no virtual
LAN by port (no Port VLAN), and with no tag assigned.
vlanByPort(2) represents all switch ports with Basic
VLAN (layer2 Switch). "
::= { snSwInfo 1 }
snSwGroupIpL3SwMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Switch Group is configured with the Layer3
IP Switch mode either enabled or disabled and the
default is disabled mode.
enabled(1)...........activate Layer3 IP Switch
disabled(0)..........disable Layer3 IP Switch"
::= { snSwInfo 2 }
snSwGroupIpMcastMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Switch Group is configured with the IP Multicast
pruning mode either enabled or disabled and the
default is disabled mode.
enabled(1)...........activate IP Multicast pruning
disabled(0)..........no IP Multicast pruning"
::= { snSwInfo 3 }
snSwGroupDefaultCfgMode OBJECT-TYPE
SYNTAX INTEGER {
default(1),
nonDefault(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Switch Group is configured with the Default
configuration. If the default configuration gets
overwritten, the state will change to non-default.
default(1)...........default configuration
nonDefault(2)..........non default configuration"
::= { snSwInfo 4 }
snSwGroupSwitchAgeTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Switch Age time is 180sec by default.
The configured range is 10 to 10,000sec. The time
represents the time span to age out an MAC Address
entry."
::= { snSwInfo 5 }
snVLanGroupVlanCurEntry OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current total entry number of VLANs are configured."
::= { snSwInfo 6 }
snVLanGroupSetAllVLan OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is the VLanIndex of a particalur
entry in snVLanByPortTable (snVLanByPortVLanIndex).
All the attributes of that row of table except PortMask
will be used to set the same attributes for the
entire VLan group. VLanId and PortMask must be set for
that particular entry prior to setting this object.
Switch software will base on that VLAN information
to set the entire VLAN.
Note: All the intended attributes of the given
row of the table (given VLAN) must be set prior
setting this object. When this object is set,
Set-All-VLAN action will take place simultaneously.
The previous setting will be overwritten by the
new one."
::= { snSwInfo 7 }
snSwPortSetAll OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is the index number of the
snSwPortInfoTable (snSwPortInfoPortIndex).
snSwPortInfoMonitorMode, snSwPortInfoTagMode,
snSwPortInfoChnMode, snSwPortInfoSpeed,
snSwPortInfoAdminStatus are all the
read-write attributes of that row of table.
They will be used to set the same attributes for
all the ports in the system.
Note: prior setting this object, all the intended
attributes of the given row of the table must be set.
Otherwise, the current data of the row will be used to
set the entire port-table. The previous setting will
be overwritten by the new one."
::= { snSwInfo 8 }
snFdbTableCurEntry OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current total entry number of FDB are configured."
::= { snSwInfo 9 }
snFdbTableStationFlush OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
error(2),
flush(3),
flushing(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The following values of the flush state
can only be read:
normal(1)... normal state
error(2)... operation failed
flushing(4)... in process
The following value can be written:
flush(3).....do flush
The agent will return a response even before the flush is done.
And the read value will be flushing until flush is done.
And the flush request will be rejected until error or normal."
::= { snSwInfo 10 }
snPortStpSetAll OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is 1 which means invoking
Port STP Set-all command. The snPortStpPriority,
snPortStpPathCost, the read-write STP related
attributes of the first row of table will be used
to set the same attributes for all the ports in the
system.
Note: prior setting this object, all the intended
attributes of the given row of the table must be set.
Otherwise, the current data of the row will be used to
set the entire port-table. The previous setting will
be overwritten by the new one."
::= { snSwInfo 11 }
snSwProbePortNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A chassis switch probe port is operated as a traffic analyzer
port and only one port can be assigned in the chassis.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number.
A stackable switch is only assigned with one probe port as a
traffic analyzer."
::= { snSwInfo 12 }
snSw8021qTagMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Switch Group is configured with the IEEE802.1q
Tagging mode either enabled or disabled and the
default is disabled mode.
enabled(1)...........activate IEEE802.1q Tagging mode.
disabled(0)..........no IEEE802.1q Tagging."
::= { snSwInfo 13 }
snSwGlobalStpMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Spanning Tree System Global Mode in the Switch Group
can be set either enabled or disabled and the default is
enabled mode.
enabled(1)...........activate Spanning Tree
disabled(0)..........no Spanning Tree"
::= { snSwInfo 14 }
snSwIpMcastQuerierMode OBJECT-TYPE
SYNTAX INTEGER {
querier(1),
nonQuerier(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP Multicast pruning mode is configured either
Non-Querier or Querier mode and the default is
querier mode.
querier(1)...........when prunning traffic locally
within the VLAN.
nonQuerier(2)........when running with a multicast
capable router in the network."
::= { snSwInfo 15 }
snSwViolatorPortNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port number of the switch or router that received
a violator packet. It is included in the locked
address violation trap.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number (slot for chassis only)."
::= { snSwInfo 17 }
snSwViolatorMacAddress OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The source address of the violator packet received
by the switch or router. It is included in the locked
address violation trap."
::= { snSwInfo 18 }
snVLanGroupVlanMaxEntry OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum number of VLAN entries are allowed to configure."
::= { snSwInfo 19 }
snSwEosBufferSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A specific buffer size for all the different EOS buffers."
::= { snSwInfo 20 }
snVLanByPortEntrySize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of each VLAN table entry."
::= { snSwInfo 21 }
snSwPortEntrySize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of each port table entry."
::= { snSwInfo 22 }
snFdbStationEntrySize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of each Fdb station table entry."
::= { snSwInfo 23 }
snPortStpEntrySize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of each port stp table entry."
::= { snSwInfo 24 }
snSwEnableBridgeNewRootTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the SNMP agent process is
permitted to generate bridge new root traps."
DEFVAL { enabled }
::= { snSwInfo 25 }
snSwEnableBridgeTopoChangeTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the SNMP agent process is
permitted to generate bridge topology change
traps."
DEFVAL { enabled }
::= { snSwInfo 26 }
snSwEnableLockedAddrViolationTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the SNMP agent process is
permitted to generate locked address violation
traps."
DEFVAL { enabled }
::= { snSwInfo 27 }
snSwIpxL3SwMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Switch Group is configured with the Layer3
IPX Switch mode either enabled or disabled and
the default is disabled mode.
enabled(1)...........activate Layer3 Switch
disabled(0)..........disable Layer3 Switch"
::= { snSwInfo 28 }
snVLanByIpSubnetMaxSubnets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of subnets for each IP VLAN."
::= { snSwInfo 29 }
snVLanByIpxNetMaxNetworks OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of networks for each IPX VLAN."
::= { snSwInfo 30 }
snSwProtocolVLanMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"disabled(0) - represents system with Protocol VLAN disabled.
enabled(1) - represents system with Protocol VLAN enabled (Layer3 VLAN)."
::= { snSwInfo 31 }
snMacStationVLanId OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This MAC Station VLAN ID index to the standard Forwarding Database for Transparent Bridge Table.
(dot1dTpFdbTable). Since the dot1dTpFdbTable index is the MAC Address assigned to one of
the ports in the bridge(VLAN) and each MAC address can be re-assigned to a different
ports belonging to different bridges(VLANs), the snMacStationVLanId can be used by
users to specify which bridge(VLAN) MAC Station information of the dot1dTpFdbTable
users want to retrieve. If users do not specify the VLan ID in this MIB, the default
VLAN (bridge) ID will be used when dot1dTpFdbTable is retrieved."
::= { snSwInfo 32 }
snSwClearCounters OBJECT-TYPE
SYNTAX INTEGER {
valid(0),
clear(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"valid(0) - a SNMP-GET of this mib shows that it is valid command to use.
clear(1) - represents clear counter command of the following counters:
Dot3, MIB2, IP and IPX counters for all ports."
::= { snSwInfo 33 }
snSw8021qTagType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IEEE802.1q tag type embedded in the length/type field of
an Ethernet packet. It specifies that the 2 octets after the
length/type field in an Ethernet packet is the tag value."
DEFVAL { 33024 }
::= { snSwInfo 34 }
snSwBroadcastLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Limit the number of broadcast packets to forward out of the
switch ports. This object specifies the number of broadcast
packets per second. Setting a value of 0 to this object
disables the limitation check."
DEFVAL { 0 }
::= { snSwInfo 35 }
snSwMaxMacFilterPerSystem OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of MAC Filters per system in the MAC Filter table."
::= { snSwInfo 36 }
snSwMaxMacFilterPerPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of MAC Filters per port in the Port MAC Access Filter table."
::= { snSwInfo 37 }
snSwDefaultVLanId OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The VLAN ID of the DEFAULT PORT-VLAN."
::= { snSwInfo 38 }
snSwGlobalAutoNegotiate OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1),
negFullAuto(2),
other(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This feature only applies to Gigabit Ethernet ports. If set
to disable(0), all Gigabit Ethernet ports will be put to non-
negotiation mode. If set to enable(1), all Gigabit Ethernet
ports will start auto-negotiation indefinitely until succeed.
If set to negFullAuto(2), all Gigabit Ethernet ports will start
with auto-negotiation, if the negotiation failed, then they
will automatically switch to non-negotiation mode. Stackable
products (except TurboIron 8) Gigabit Ethernet ports do not
support negFullAuto(2). If the snSwPortInfoAutoNegotiate value
of a port was not set to global, this global value does not
apply to the negotiation mode of that port."
DEFVAL { negFullAuto }
::= { snSwInfo 39 }
snSwQosMechanism OBJECT-TYPE
SYNTAX INTEGER { strict(0), weighted(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the qos mechanism is
strict or weighted."
DEFVAL { weighted }
::= { snSwInfo 40 }
snSwSingleStpMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Single Spanning Tree System Mode in the Switch Group
can be set either enabled or disabled and the default is
disabled mode.
enabled(1)...........activate Single Spanning Tree
disabled(0)..........no Single Spanning Tree"
::= { snSwInfo 41 }
snSwFastStpMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Fast Spanning Tree System Mode in the Switch Group
can be set either enabled or disabled and the default is
enabled mode.
enabled(1)...........activate Fast Spanning Tree
disabled(0)..........no Fast Spanning Tree"
::= { snSwInfo 42 }
-- VLAN Layer 2 Switch VLAN By Port Information Table
snVLanByPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnVLanByPortEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"If snSwGroupOperMode is configured as basic mode
which is VLAN by Port, Layer2 switching,
then this table is valid. Each VLAN switch port
could have a number of VLAN IDs."
::= { snVLanInfo 1 }
snVLanByPortEntry OBJECT-TYPE
SYNTAX SnVLanByPortEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry in the VLAN By Port Information table.
snVLanByPortVLanIndex = 1 and with
snVLanByPortVLanId = 1 together implies all attributes
applying to the Global switch group i.e. noVLan.
A SNMP SET PDU for a row of the snVLanByPortTable
requires the entired sequence of the MIB Objects in each
snVLanByPortEntry stored in one PDU. Otherwise,
GENERR return-value will be returned."
INDEX {
snVLanByPortVLanIndex
}
::= { snVLanByPortTable 1 }
SnVLanByPortEntry ::= SEQUENCE {
snVLanByPortVLanIndex
INTEGER,
snVLanByPortVLanId
INTEGER,
snVLanByPortPortMask
PortMask,
snVLanByPortQos
INTEGER,
snVLanByPortStpMode
INTEGER,
snVLanByPortStpPriority
INTEGER,
snVLanByPortStpGroupMaxAge
INTEGER,
snVLanByPortStpGroupHelloTime
INTEGER,
snVLanByPortStpGroupForwardDelay
INTEGER,
snVLanByPortRowStatus
INTEGER,
snVLanByPortOperState
INTEGER,
snVLanByPortBaseNumPorts
INTEGER,
snVLanByPortBaseType
INTEGER,
snVLanByPortStpProtocolSpecification
INTEGER,
snVLanByPortStpMaxAge
Timeout,
snVLanByPortStpHelloTime
Timeout,
snVLanByPortStpHoldTime
INTEGER,
snVLanByPortStpForwardDelay
Timeout,
snVLanByPortStpTimeSinceTopologyChange
TimeTicks,
snVLanByPortStpTopChanges
Counter,
snVLanByPortStpRootCost
INTEGER,
snVLanByPortStpRootPort
INTEGER,
snVLanByPortStpDesignatedRoot
BridgeId,
snVLanByPortBaseBridgeAddress
MacAddress,
snVLanByPortVLanName
DisplayString,
snVLanByPortRouterIntf
INTEGER,
snVLanByPortChassisPortMask
OCTET STRING,
snVLanByPortPortList
OCTET STRING
}
snVLanByPortVLanIndex OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The VLAN ID index must not be greater than the
snVLanGroupVlanMaxEntry. Each VLAN Identifier can
have a membership of multiple ports."
::= { snVLanByPortEntry 1 }
snVLanByPortVLanId OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The VLAN ID index to the VLAN By Port Info Table.
Each VLAN Identifier can have a membership of multiple
ports."
::= { snVLanByPortEntry 2 }
snVLanByPortPortMask OBJECT-TYPE
SYNTAX PortMask
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The Standand-alone switch VLAN port membership. (It was obsoleted for Chassis Product)"
::= { snVLanByPortEntry 3 }
snVLanByPortQos OBJECT-TYPE
SYNTAX INTEGER {
level0(0),
level1(1),
level2(2),
level3(3),
level4(4),
level5(5),
level6(6),
level7(7)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The Stand alone stackable switch VLAN Priority values are:
low(0) -- low prority
high(1) -- high prority.
The BigIron switch VLAN Priority values are:
level0(0), level1(1), level2(2), level3(3),
level4(4), level5(5), level6(6), level7(7) "
::= { snVLanByPortEntry 4 }
snVLanByPortStpMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Spanning Tree Mode in the Switch Group can be set
either enabled or disabled and the default is
enabled mode.
enabled(1)...........activate Spanning Tree
disabled(0)..........no Spanning Tree"
::= { snVLanByPortEntry 5 }
snVLanByPortStpPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS deprecated
DESCRIPTION
"dot1dStpPriority : The value of the write-able
portion of the Stp ID, i.e., the first two octets
of the (8 octet long) Bridge ID. The other (last) 6
octets of the Bridge ID are given by the value of the
base bridge address - dot1dBaseBridgeAddress."
::= { snVLanByPortEntry 6 }
snVLanByPortStpGroupMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
ACCESS read-write
STATUS deprecated
DESCRIPTION
"dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB).
The value that all bridges use for MaxAge when
this bridge is acting as the root.
Note that 802.1D-1990 specifies that the
range for this parameter is related to the value of
dot1dStpBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
::= { snVLanByPortEntry 7 }
snVLanByPortStpGroupHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
ACCESS read-write
STATUS deprecated
DESCRIPTION
"dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB).
The value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may return a
badValue error if a set is attempted to a value
which is not a whole number of seconds."
::= { snVLanByPortEntry 8 }
snVLanByPortStpGroupForwardDelay OBJECT-TYPE
SYNTAX INTEGER (2..30)
ACCESS read-write
STATUS deprecated
DESCRIPTION
"dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB).
The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
dot1dStpBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
::= { snVLanByPortEntry 9 }
snVLanByPortRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
other(1)....some other case
valid(2)....the row exists and is valid"
::= { snVLanByPortEntry 10 }
snVLanByPortOperState OBJECT-TYPE
SYNTAX INTEGER {
notActivated(0),
activated(1)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"By default, this mode is set to notActivated(0).
notActivated(0)...the VLAN entry is not activated and not in running mode.
activated(1)......the VLAN entry is activated and in running mode"
::= { snVLanByPortEntry 11 }
snVLanByPortBaseNumPorts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of ports controlled by this bridging
entity."
::= { snVLanByPortEntry 12 }
snVLanByPortBaseType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
transparent-only(2),
sourceroute-only(3),
srt(4)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates what type of bridging this bridge can
perform. If a bridge is actually performing a
certain type of bridging this will be indicated by
entries in the port table for the given type."
::= { snVLanByPortEntry 13 }
snVLanByPortStpProtocolSpecification OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
decLb100(2),
ieee8021d(3)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"An indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
future versions of the IEEE Spanning Tree Protocol
are released that are incompatible with the
current version a new value will be defined."
::= { snVLanByPortEntry 14 }
snVLanByPortStpMaxAge OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS deprecated
DESCRIPTION
"dot1dStpMaxAge: From RFC1493(Bridge MIB).
The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using."
::= { snVLanByPortEntry 15 }
snVLanByPortStpHelloTime OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS deprecated
DESCRIPTION
"dot1dStpHelloTime: From RFC1493(Bridge MIB).
The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using."
::= { snVLanByPortEntry 16 }
snVLanByPortStpHoldTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"dot1dStpHoldTime: From RFC1493(Bridge MIB).
This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second."
::= { snVLanByPortEntry 17 }
snVLanByPortStpForwardDelay OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS deprecated
DESCRIPTION
"dot1dStpForwardDelay: From RFC1493(Bridge MIB).
This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
dot1dStpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]"
::= { snVLanByPortEntry 18 }
snVLanByPortStpTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity."
::= { snVLanByPortEntry 19 }
snVLanByPortStpTopChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The total number of topology changes detected by
this bridge since the management entity was last
reset or initialized."
::= { snVLanByPortEntry 20 }
snVLanByPortStpRootCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"dot1dStpRootCost: From RFC1493(Bridge MIB).
The cost of the path to the root as seen from
this bridge."
::= { snVLanByPortEntry 21 }
snVLanByPortStpRootPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"dot1dStpRootPort: From RFC1493(Bridge MIB).
The port number of the port which offers the
lowest cost path from this bridge to the root
bridge."
::= { snVLanByPortEntry 22 }
snVLanByPortStpDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS deprecated
DESCRIPTION
"dot1dStpDesignatedRoot: From RFC1493(Bridge MIB).
The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { snVLanByPortEntry 23 }
snVLanByPortBaseBridgeAddress OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong to this
bridge. However it is only required to be unique.
When concatenated with dot1dStpPriority a unique
BridgeIdentifier is formed which is used in the
Spanning Tree Protocol."
::= { snVLanByPortEntry 24 }
snVLanByPortVLanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-write
STATUS deprecated
DESCRIPTION
"VLAN Community Name string."
::= { snVLanByPortEntry 25 }
snVLanByPortRouterIntf OBJECT-TYPE
SYNTAX INTEGER (1..60)
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Optional: A virtual interface for router to the VLAN -- applied to router only.
If a SNMP-Get value is zero, that means this object was not configured."
::= { snVLanByPortEntry 26 }
snVLanByPortChassisPortMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(32))
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The Chassis VLAN switch port membership.
(It was obsoleted after release 07100, replaced by snVLanByPortPortList)"
::= { snVLanByPortEntry 27 }
snVLanByPortPortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS deprecated
DESCRIPTION
"A list of port indices which are the port
membership of a VLAN By Port. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number."
::= { snVLanByPortEntry 28 }
-- Port VLAN (Layer 2 VLAN) Port Membership Table
-- Use this table to create or delete a VLAN entry
snVLanByPortMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnVLanByPortMemberEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Port VLAN (Layer 2 VLAN) port membership table."
::= { snVLanInfo 6 }
snVLanByPortMemberEntry OBJECT-TYPE
SYNTAX SnVLanByPortMemberEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the port VLAN membership table."
INDEX { snVLanByPortMemberVLanId, snVLanByPortMemberPortId }
::= { snVLanByPortMemberTable 1 }
SnVLanByPortMemberEntry ::= SEQUENCE {
snVLanByPortMemberVLanId
INTEGER,
snVLanByPortMemberPortId
INTEGER,
snVLanByPortMemberRowStatus
INTEGER
}
snVLanByPortMemberVLanId OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VLAN identifier (VLAN ID)."
::= { snVLanByPortMemberEntry 1 }
snVLanByPortMemberPortId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ifIndex which is a member of the port VLAN."
::= { snVLanByPortMemberEntry 2 }
snVLanByPortMemberRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
other(1)....some other case
valid(2)....the row exists and is valid"
::= { snVLanByPortMemberEntry 3 }
-- Port VLAN (Layer 2 VLAN) Configuration Table
-- Use this table to configure a VLAN entry
snVLanByPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnVLanByPortCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Port VLAN (Layer 2 VLAN) configuration table."
::= { snVLanInfo 7 }
snVLanByPortCfgEntry OBJECT-TYPE
SYNTAX SnVLanByPortCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the port VLAN configuration table."
INDEX { snVLanByPortCfgVLanId }
::= { snVLanByPortCfgTable 1 }
SnVLanByPortCfgEntry ::= SEQUENCE {
snVLanByPortCfgVLanId
INTEGER,
snVLanByPortCfgQos
INTEGER,
snVLanByPortCfgStpMode
INTEGER,
snVLanByPortCfgStpPriority
INTEGER,
snVLanByPortCfgStpGroupMaxAge
INTEGER,
snVLanByPortCfgStpGroupHelloTime
INTEGER,
snVLanByPortCfgStpGroupForwardDelay
INTEGER,
snVLanByPortCfgBaseNumPorts
INTEGER,
snVLanByPortCfgBaseType
INTEGER,
snVLanByPortCfgStpProtocolSpecification
INTEGER,
snVLanByPortCfgStpMaxAge
Timeout,
snVLanByPortCfgStpHelloTime
Timeout,
snVLanByPortCfgStpHoldTime
INTEGER,
snVLanByPortCfgStpForwardDelay
Timeout,
snVLanByPortCfgStpTimeSinceTopologyChange
TimeTicks,
snVLanByPortCfgStpTopChanges
Counter,
snVLanByPortCfgStpRootCost
INTEGER,
snVLanByPortCfgStpRootPort
INTEGER,
snVLanByPortCfgStpDesignatedRoot
BridgeId,
snVLanByPortCfgBaseBridgeAddress
MacAddress,
snVLanByPortCfgVLanName
DisplayString,
snVLanByPortCfgRouterIntf
INTEGER,
snVLanByPortCfgRowStatus
INTEGER
}
snVLanByPortCfgVLanId OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VLAN identifier (VLAN ID)."
::= { snVLanByPortCfgEntry 1 }
snVLanByPortCfgQos OBJECT-TYPE
SYNTAX INTEGER {
level0(0),
level1(1),
level2(2),
level3(3),
level4(4),
level5(5),
level6(6),
level7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Stand alone stackable switch VLAN Priority values are:
level0(0) -- low prority
level1(1) -- high prority.
The BigIron switch VLAN Priority values are:
level0(0), level1(1), level2(2), level3(3),
level4(4), level5(5), level6(6), level7(7) "
::= { snVLanByPortCfgEntry 2 }
snVLanByPortCfgStpMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Spanning Tree Mode in the Switch Group can be set
either enabled or disabled and the default is
enabled mode.
enabled(1)...........activate Spanning Tree
disabled(0)..........no Spanning Tree"
::= { snVLanByPortCfgEntry 3 }
snVLanByPortCfgStpPriority OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"dot1dStpPriority : The value of the write-able
portion of the Stp ID, i.e., the first two octets
of the (8 octet long) Bridge ID. The other (last) 6
octets of the Bridge ID are given by the value of the
base bridge address - dot1dBaseBridgeAddress."
::= { snVLanByPortCfgEntry 4 }
snVLanByPortCfgStpGroupMaxAge OBJECT-TYPE
SYNTAX INTEGER (6..40)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB).
The value that all bridges use for MaxAge when
this bridge is acting as the root.
Note that 802.1D-1990 specifies that the
range for this parameter is related to the value of
dot1dStpBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
::= { snVLanByPortCfgEntry 5 }
snVLanByPortCfgStpGroupHelloTime OBJECT-TYPE
SYNTAX INTEGER (1..10)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB).
The value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may return a
badValue error if a set is attempted to a value
which is not a whole number of seconds."
::= { snVLanByPortCfgEntry 6 }
snVLanByPortCfgStpGroupForwardDelay OBJECT-TYPE
SYNTAX INTEGER (2..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB).
The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
dot1dStpBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds."
::= { snVLanByPortCfgEntry 7 }
snVLanByPortCfgBaseNumPorts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of ports controlled by this bridging
entity."
::= { snVLanByPortCfgEntry 8 }
snVLanByPortCfgBaseType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
transparent-only(2),
sourceroute-only(3),
srt(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates what type of bridging this bridge can
perform. If a bridge is actually performing a
certain type of bridging this will be indicated by
entries in the port table for the given type."
::= { snVLanByPortCfgEntry 9 }
snVLanByPortCfgStpProtocolSpecification OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
decLb100(2),
ieee8021d(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
future versions of the IEEE Spanning Tree Protocol
are released that are incompatible with the
current version a new value will be defined."
::= { snVLanByPortCfgEntry 10 }
snVLanByPortCfgStpMaxAge OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS mandatory
DESCRIPTION
"dot1dStpMaxAge: From RFC1493(Bridge MIB).
The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using."
::= { snVLanByPortCfgEntry 11 }
snVLanByPortCfgStpHelloTime OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS mandatory
DESCRIPTION
"dot1dStpHelloTime: From RFC1493(Bridge MIB).
The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using."
::= { snVLanByPortCfgEntry 12 }
snVLanByPortCfgStpHoldTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"dot1dStpHoldTime: From RFC1493(Bridge MIB).
This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second."
::= { snVLanByPortCfgEntry 13 }
snVLanByPortCfgStpForwardDelay OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS mandatory
DESCRIPTION
"dot1dStpForwardDelay: From RFC1493(Bridge MIB).
This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
dot1dStpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]"
::= { snVLanByPortCfgEntry 14 }
snVLanByPortCfgStpTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity."
::= { snVLanByPortCfgEntry 15 }
snVLanByPortCfgStpTopChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of topology changes detected by
this bridge since the management entity was last
reset or initialized."
::= { snVLanByPortCfgEntry 16 }
snVLanByPortCfgStpRootCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"dot1dStpRootCost: From RFC1493(Bridge MIB).
The cost of the path to the root as seen from
this bridge."
::= { snVLanByPortCfgEntry 17 }
snVLanByPortCfgStpRootPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"dot1dStpRootPort: From RFC1493(Bridge MIB).
The port number of the port which offers the
lowest cost path from this bridge to the root
bridge."
::= { snVLanByPortCfgEntry 18 }
snVLanByPortCfgStpDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
"dot1dStpDesignatedRoot: From RFC1493(Bridge MIB).
The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node."
::= { snVLanByPortCfgEntry 19 }
snVLanByPortCfgBaseBridgeAddress OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong to this
bridge. However it is only required to be unique.
When concatenated with dot1dStpPriority a unique
BridgeIdentifier is formed which is used in the
Spanning Tree Protocol."
::= { snVLanByPortCfgEntry 20 }
snVLanByPortCfgVLanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN Community Name string."
::= { snVLanByPortCfgEntry 21 }
snVLanByPortCfgRouterIntf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Optional: A virtual interface for router to the VLAN -- applied to router only.
If a SNMP-Get value is zero, that means this object was not configured."
::= { snVLanByPortCfgEntry 22 }
snVLanByPortCfgRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Use object to delete a vlan entry."
::= { snVLanByPortCfgEntry 23 }
-- VLAN by Protocol Configuration Table
snVLanByProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnVLanByProtocolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"."
::= { snVLanInfo 2 }
snVLanByProtocolEntry OBJECT-TYPE
SYNTAX SnVLanByProtocolEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the VLAN By Protocol Configuration table. "
INDEX {
snVLanByProtocolVLanId,
snVLanByProtocolIndex
}
::= { snVLanByProtocolTable 1 }
SnVLanByProtocolEntry ::= SEQUENCE {
snVLanByProtocolVLanId
INTEGER,
snVLanByProtocolIndex
INTEGER,
snVLanByProtocolDynamic
INTEGER,
snVLanByProtocolStaticMask
PortMask,
snVLanByProtocolExcludeMask
PortMask,
snVLanByProtocolRouterIntf
INTEGER,
snVLanByProtocolRowStatus
INTEGER,
snVLanByProtocolDynamicMask
PortMask,
snVLanByProtocolChassisStaticMask
OCTET STRING,
snVLanByProtocolChassisExcludeMask
OCTET STRING,
snVLanByProtocolChassisDynamicMask
OCTET STRING,
snVLanByProtocolVLanName
DisplayString,
snVLanByProtocolStaticPortList
OCTET STRING,
snVLanByProtocolExcludePortList
OCTET STRING,
snVLanByProtocolDynamicPortList
OCTET STRING
}
snVLanByProtocolVLanId OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VLAN ID index to both of the VLAN By Port Info Table
and this table."
::= { snVLanByProtocolEntry 1 }
snVLanByProtocolIndex OBJECT-TYPE
SYNTAX INTEGER {
ip(1),
ipx(2),
appleTalk(3),
decNet(4),
netBios(5),
others(6),
ipv6(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The following IP/IPX protocol VLAN types are operated
in Layer3 VLAN such as : ip(1), ipx(2), ipv6(7)
The following are operated in Layer2 bridging such as:
appleTalk(3), decNet(4), netBios(5),
others(6) -- other protocols which are defined here. "
::= { snVLanByProtocolEntry 2 }
snVLanByProtocolDynamic OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" disabled(0) : disabled dynamic port inclusion - applied to switch only.
enabled(1) : enabled dynamic port inclusion - applied to switch only. "
::= { snVLanByProtocolEntry 3 }
snVLanByProtocolStaticMask OBJECT-TYPE
SYNTAX PortMask
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The Standand-alone switch Protocol VLAN port membership applied in static mode.
(It was obsoleted for Chassis Product)"
::= { snVLanByProtocolEntry 4 }
snVLanByProtocolExcludeMask OBJECT-TYPE
SYNTAX PortMask
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The Standand-alone switch Protocol VLAN port membership applied in exclusive mode.
(It was obsoleted for Chassis Product)"
::= { snVLanByProtocolEntry 5 }
snVLanByProtocolRouterIntf OBJECT-TYPE
SYNTAX INTEGER (1..60)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Optional: A virtual interface for router to the VLAN -- applied to router only.
If a SNMP-Get value is zero, that means this object was not configured."
::= { snVLanByProtocolEntry 6 }
snVLanByProtocolRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
other(1)....some other case
valid(2)....the row exists and is valid"
::= { snVLanByProtocolEntry 7 }
snVLanByProtocolDynamicMask OBJECT-TYPE
SYNTAX PortMask
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The Standand-alone switch Protocol VLAN active port membership.
(It was obsoleted for Chassis Product)"
::= { snVLanByProtocolEntry 8 }
snVLanByProtocolChassisStaticMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(32))
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The Chassis Protocol VLAN port membership applied in static mode.
(It was obsoleted after release 07100, replaced by snVLanByProtocolStaticPortList)"
::= { snVLanByProtocolEntry 9 }
snVLanByProtocolChassisExcludeMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(32))
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The Chassis Protocol VLAN port membership applied in exclusive mode.
(It was obsoleted after release 07100, replaced by snVLanByProtocolExcludePortList)"
::= { snVLanByProtocolEntry 10 }
snVLanByProtocolChassisDynamicMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(32))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The Chassis Protocol VLAN active port membership.
(It was obsoleted after release 07100, replaced by snVLanByProtocolDynamicPortList)"
::= { snVLanByProtocolEntry 11 }
snVLanByProtocolVLanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN Community Name string."
::= { snVLanByProtocolEntry 12 }
snVLanByProtocolStaticPortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A list of port indices which are the configured port
membership of the Protocol VLAN. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number."
::= { snVLanByProtocolEntry 13 }
snVLanByProtocolExcludePortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A list of port indices which are the excluded from port
membership of the Protocol VLAN. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number."
::= { snVLanByProtocolEntry 14 }
snVLanByProtocolDynamicPortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A list of port indices which are dynamically joining the port
membership of the Protocol VLAN. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number."
::= { snVLanByProtocolEntry 15 }
-- VLAN By IP Subnet Configuration Table
snVLanByIpSubnetTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnVLanByIpSubnetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the VLAN By IPX Network Number Table."
::= { snVLanInfo 3 }
snVLanByIpSubnetEntry OBJECT-TYPE
SYNTAX SnVLanByIpSubnetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the VLAN By IP Subnet Configuration table. "
INDEX {
snVLanByIpSubnetVLanId,
snVLanByIpSubnetIpAddress,
snVLanByIpSubnetSubnetMask
}
::= { snVLanByIpSubnetTable 1 }
SnVLanByIpSubnetEntry ::= SEQUENCE {
snVLanByIpSubnetVLanId
INTEGER,
snVLanByIpSubnetIpAddress
IpAddress,
snVLanByIpSubnetSubnetMask
IpAddress,
snVLanByIpSubnetDynamic
INTEGER,
snVLanByIpSubnetStaticMask
PortMask,
snVLanByIpSubnetExcludeMask
PortMask,
snVLanByIpSubnetRouterIntf
INTEGER,
snVLanByIpSubnetRowStatus
INTEGER,
snVLanByIpSubnetDynamicMask
PortMask,
snVLanByIpSubnetChassisStaticMask
OCTET STRING,
snVLanByIpSubnetChassisExcludeMask
OCTET STRING,
snVLanByIpSubnetChassisDynamicMask
OCTET STRING,
snVLanByIpSubnetVLanName
DisplayString,
snVLanByIpSubnetStaticPortList
OCTET STRING,
snVLanByIpSubnetExcludePortList
OCTET STRING,
snVLanByIpSubnetDynamicPortList
OCTET STRING
}
snVLanByIpSubnetVLanId OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VLAN ID index to both of the VLAN By Port Info Table
and this table."
::= { snVLanByIpSubnetEntry 1 }
snVLanByIpSubnetIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Subnet IP address."
::= { snVLanByIpSubnetEntry 2 }
snVLanByIpSubnetSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Subnet mask associated with the Subnet IP address."
::= { snVLanByIpSubnetEntry 3 }
snVLanByIpSubnetDynamic OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" disabled(0) : disabled dynamic port inclusion - applied to switch only.
enabled(1) : enabled dynamic port inclusion - applied to switch only. "
::= { snVLanByIpSubnetEntry 4 }
snVLanByIpSubnetStaticMask OBJECT-TYPE
SYNTAX PortMask
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The Standand-alone switch VLAN By Subnet port membership applied in static mode.
(It was obsoleted for Chassis Product)"
::= { snVLanByIpSubnetEntry 5 }
snVLanByIpSubnetExcludeMask OBJECT-TYPE
SYNTAX PortMask
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The Standand-alone switch VLAN By Subnet port membership applied in exclusive mode.
(It was obsoleted for Chassis Product)"
::= { snVLanByIpSubnetEntry 6 }
snVLanByIpSubnetRouterIntf OBJECT-TYPE
SYNTAX INTEGER (1..60)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Optional: A virtual interface for router to the VLAN -- applied to router only.
If a SNMP-Get value is zero, that means this object was not configured."
::= { snVLanByIpSubnetEntry 7 }
snVLanByIpSubnetRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
other(1)....some other case
valid(2)....the row exists and is valid"
::= { snVLanByIpSubnetEntry 8 }
snVLanByIpSubnetDynamicMask OBJECT-TYPE
SYNTAX PortMask
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The Standand-alone switch VLAN By Subnet active port membership.
(It was obsoleted for Chassis Product)"
::= { snVLanByIpSubnetEntry 9 }
snVLanByIpSubnetChassisStaticMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(32))
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The Chassis VLAN By Subnet port membership applied in static mode.
(It was obsoleted after release 07100, replaced by snVLanByIpSubnetStaticPortList)"
::= { snVLanByIpSubnetEntry 10 }
snVLanByIpSubnetChassisExcludeMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(32))
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The Chassis VLAN By Subnet port membership applied in exclusive mode.
(It was obsoleted after release 07100, replaced by snVLanByIpSubnetExcludePortList)"
::= { snVLanByIpSubnetEntry 11 }
snVLanByIpSubnetChassisDynamicMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(32))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The Chassis VLAN By Subnet active port membership.
(It was obsoleted after release 07100, replaced by snVLanByIpSubnetDynamicPortList)"
::= { snVLanByIpSubnetEntry 12 }
snVLanByIpSubnetVLanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN Community Name string."
::= { snVLanByIpSubnetEntry 13 }
snVLanByIpSubnetStaticPortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A list of port indices which are the configured port
membership of the VLAN By IP Subnet. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number."
::= { snVLanByIpSubnetEntry 14 }
snVLanByIpSubnetExcludePortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A list of port indices which are the excluded from port
membership of the VLAN By IP Subnet. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number."
::= { snVLanByIpSubnetEntry 15 }
snVLanByIpSubnetDynamicPortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A list of port indices which are dynamically joining the port
membership of the VLAN By IP Subnet. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number."
::= { snVLanByIpSubnetEntry 16 }
-- VLAN By IPX Net Configuration Table
snVLanByIpxNetTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnVLanByIpxNetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the VLAN By IPX Network Number Table."
::= { snVLanInfo 4 }
snVLanByIpxNetEntry OBJECT-TYPE
SYNTAX SnVLanByIpxNetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the VLAN By Ipx Network Number Configuration table. "
INDEX {
snVLanByIpxNetVLanId,
snVLanByIpxNetNetworkNum,
snVLanByIpxNetFrameType
}
::= { snVLanByIpxNetTable 1 }
SnVLanByIpxNetEntry ::= SEQUENCE {
snVLanByIpxNetVLanId
INTEGER,
snVLanByIpxNetNetworkNum
OCTET STRING,
snVLanByIpxNetFrameType
INTEGER,
snVLanByIpxNetDynamic
INTEGER,
snVLanByIpxNetStaticMask
PortMask,
snVLanByIpxNetExcludeMask
PortMask,
snVLanByIpxNetRouterIntf
INTEGER,
snVLanByIpxNetRowStatus
INTEGER,
snVLanByIpxNetDynamicMask
PortMask,
snVLanByIpxNetChassisStaticMask
OCTET STRING,
snVLanByIpxNetChassisExcludeMask
OCTET STRING,
snVLanByIpxNetChassisDynamicMask
OCTET STRING,
snVLanByIpxNetVLanName
DisplayString,
snVLanByIpxNetStaticPortList
OCTET STRING,
snVLanByIpxNetExcludePortList
OCTET STRING,
snVLanByIpxNetDynamicPortList
OCTET STRING
}
snVLanByIpxNetVLanId OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VLAN ID index to both of the VLAN By Port Info Table
and this table."
::= { snVLanByIpxNetEntry 1 }
snVLanByIpxNetNetworkNum OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX Network Number."
::= { snVLanByIpxNetEntry 2 }
snVLanByIpxNetFrameType OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(0),
ipxEthernet8022(1),
ipxEthernet8023(2),
ipxEthernetII(3),
ipxEthernetSnap(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The following IPX Frame types are operated
in Layer3 VLAN such as :
ipxEthernet8022(1), ipxEthernet8023(2),
ipxEthernetII(3), ipxEthernetSnap(4).
choose notApplicable(0) for other protocols.
Note: Each Network Number can be assigned with one unique Frame type; Otherwise,
a SNMP-SET error will be returned."
::= { snVLanByIpxNetEntry 3 }
snVLanByIpxNetDynamic OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" disabled(0) : disabled dynamic port inclusion - applied to switch only.
enabled(1) : enabled dynamic port inclusion - applied to switch only. "
::= { snVLanByIpxNetEntry 4 }
snVLanByIpxNetStaticMask OBJECT-TYPE
SYNTAX PortMask
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The VLAN By IPX network port membership applied in static mode.
(It was obsoleted for Chassis Product)"
::= { snVLanByIpxNetEntry 5 }
snVLanByIpxNetExcludeMask OBJECT-TYPE
SYNTAX PortMask
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The VLAN By IPX network port membership applied in exclusive mode.
(It was obsoleted for Chassis Product)"
::= { snVLanByIpxNetEntry 6 }
snVLanByIpxNetRouterIntf OBJECT-TYPE
SYNTAX INTEGER (1..60)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Optional: A virtual interface for router to the VLAN -- applied to router only.
If a SNMP-Get value is zero, that means this object was not configured."
::= { snVLanByIpxNetEntry 7 }
snVLanByIpxNetRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
other(1)....some other case
valid(2)....the row exists and is valid"
::= { snVLanByIpxNetEntry 8 }
snVLanByIpxNetDynamicMask OBJECT-TYPE
SYNTAX PortMask
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The VLAN By IPX network active port membership.
(It was obsoleted for Chassis Product)"
::= { snVLanByIpxNetEntry 9 }
snVLanByIpxNetChassisStaticMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(32))
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The Chassis VLAN By IPX network port membership applied in static mode.
(It was obsoleted after release 07100, replaced by snVLanByIpxNetStaticPortList)"
::= { snVLanByIpxNetEntry 10 }
snVLanByIpxNetChassisExcludeMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(32))
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The Chassis VLAN By IPX network port membership applied in exclusive mode.
(It was obsoleted after release 07100, replaced by snVLanByIpxNetExcludePortList)"
::= { snVLanByIpxNetEntry 11 }
snVLanByIpxNetChassisDynamicMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(32))
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The Chassis VLAN By IPX network active port membership.
(It was obsoleted after release 07100, replaced by snVLanByIpxNetDynamicPortList)"
::= { snVLanByIpxNetEntry 12 }
snVLanByIpxNetVLanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN Community Name string."
::= { snVLanByIpxNetEntry 13 }
snVLanByIpxNetStaticPortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A list of port indices which are the configured port
membership of the VLAN By IPX network. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number."
::= { snVLanByIpxNetEntry 14 }
snVLanByIpxNetExcludePortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A list of port indices which are the excluded from port
membership of the VLAN By IPX network. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number."
::= { snVLanByIpxNetEntry 15 }
snVLanByIpxNetDynamicPortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A list of port indices which are dynamically joining the port
membership of the VLAN By IPX network. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number."
::= { snVLanByIpxNetEntry 16 }
-- VLAN By AppleTalk Cable Configuration Table
snVLanByATCableTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnVLanByATCableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A Table Of VLAN By AppleTalk Network Number."
::= { snVLanInfo 5 }
snVLanByATCableEntry OBJECT-TYPE
SYNTAX SnVLanByATCableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the AppleTalk Cable VLAN table."
INDEX {snVLanByATCableVLanId, snVLanByATCableIndex}
::= { snVLanByATCableTable 1 }
SnVLanByATCableEntry ::= SEQUENCE {
snVLanByATCableVLanId
INTEGER,
snVLanByATCableIndex
INTEGER,
snVLanByATCableRouterIntf
INTEGER,
snVLanByATCableRowStatus
INTEGER,
snVLanByATCableChassisStaticMask
OCTET STRING,
snVLanByATCableVLanName
DisplayString,
snVLanByATCableStaticPortList
OCTET STRING
}
snVLanByATCableVLanId OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VLAN ID of a PORT VLAN of which the AppleTalk Cable
VLAN was attaching to."
::= { snVLanByATCableEntry 1 }
snVLanByATCableIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"AppleTalk Cable VLAN index number."
::= { snVLanByATCableEntry 2 }
snVLanByATCableRouterIntf OBJECT-TYPE
SYNTAX INTEGER (0..60)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A virtual router interface to the AppleTalk Cable VLAN,
only router products accept the SNMP-SET operation. The
value zero indicates that virtual router interface was
not configured."
::= { snVLanByATCableEntry 3 }
snVLanByATCableRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
other(1)....some other case
valid(2)....the row exists and is valid"
::= { snVLanByATCableEntry 4 }
snVLanByATCableChassisStaticMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(32))
ACCESS read-write
STATUS deprecated
DESCRIPTION
"A list of ports which are statically configured to
become port members of a VLAN.
(It was obsoleted after release 07100, replaced by snVLanByATCableStaticPortList)"
::= { snVLanByATCableEntry 5 }
snVLanByATCableVLanName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VLAN Name string."
::= { snVLanByATCableEntry 6 }
snVLanByATCableStaticPortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A list of port indices which are the configured port
membership of the AppleTalk Cable VLAN. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number."
::= { snVLanByATCableEntry 7 }
-- Switch Port Information Group
snSwPortInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnSwPortInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A specific snSwPortInfo group consists of a number of
switch ports. "
::= { snSwPortInfo 1 }
snSwPortInfoEntry OBJECT-TYPE
SYNTAX SnSwPortInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the snSwPortInfo table indicates the
configuration on a specified port. A SNMP SET PDU
for a row of the snSwPortInfoTable requires the entired
sequence of the MIB Objects in each
snSwPortInfoEntry stored in one PDU. Otherwise,
GENERR return-value will be returned."
INDEX {
snSwPortInfoPortNum
}
::= { snSwPortInfoTable 1 }
SnSwPortInfoEntry ::= SEQUENCE {
snSwPortInfoPortNum
INTEGER,
snSwPortInfoMonitorMode
INTEGER,
snSwPortInfoTagMode
INTEGER,
snSwPortInfoChnMode
INTEGER,
snSwPortInfoSpeed
INTEGER,
snSwPortInfoMediaType
INTEGER,
snSwPortInfoConnectorType
INTEGER,
snSwPortInfoAdminStatus
INTEGER,
snSwPortInfoLinkStatus
INTEGER,
snSwPortInfoPortQos
INTEGER,
snSwPortInfoPhysAddress
PhysAddress,
snSwPortStatsInFrames
Counter,
snSwPortStatsOutFrames
Counter,
snSwPortStatsAlignErrors
Counter,
snSwPortStatsFCSErrors
Counter,
snSwPortStatsMultiColliFrames
Counter,
snSwPortStatsFrameTooLongs
Counter,
snSwPortStatsTxColliFrames
Counter,
snSwPortStatsRxColliFrames
Counter,
snSwPortStatsFrameTooShorts
Counter,
snSwPortLockAddressCount
INTEGER,
snSwPortStpPortEnable
INTEGER,
snSwPortDhcpGateListId
INTEGER,
snSwPortName
DisplayString,
snSwPortStatsInBcastFrames
Counter,
snSwPortStatsOutBcastFrames
Counter,
snSwPortStatsInMcastFrames
Counter,
snSwPortStatsOutMcastFrames
Counter,
snSwPortStatsInDiscard
Counter,
snSwPortStatsOutDiscard
Counter,
snSwPortStatsMacStations
INTEGER,
snSwPortCacheGroupId
INTEGER,
snSwPortTransGroupId
INTEGER,
snSwPortInfoAutoNegotiate
INTEGER,
snSwPortInfoFlowControl
INTEGER,
snSwPortInfoGigType
INTEGER,
snSwPortStatsLinkChange
Counter,
snSwPortIfIndex
INTEGER,
snSwPortDescr
DisplayString,
snSwPortInOctets
OCTET STRING,
snSwPortOutOctets
OCTET STRING,
snSwPortStatsInBitsPerSec
Gauge,
snSwPortStatsOutBitsPerSec
Gauge,
snSwPortStatsInPktsPerSec
Gauge,
snSwPortStatsOutPktsPerSec
Gauge,
snSwPortStatsInUtilization
INTEGER (0..10000),
snSwPortStatsOutUtilization
INTEGER (0..10000),
snSwPortFastSpanPortEnable
INTEGER,
snSwPortFastSpanUplinkEnable
INTEGER,
snSwPortVlanId
INTEGER,
snSwPortRouteOnly
INTEGER,
snSwPortPresent
INTEGER,
snSwPortGBICStatus
INTEGER,
snSwPortStatsInKiloBitsPerSec
Unsigned32,
snSwPortStatsOutKiloBitsPerSec
Unsigned32,
snSwPortLoadInterval
INTEGER (30..300),
snSwPortTagType
INTEGER
}
snSwPortInfoPortNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port index.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number (slot for chassis only)."
::= { snSwPortInfoEntry 1 }
snSwPortInfoMonitorMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
input(1),
output(2),
both(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A monitoring port is selected and its traffic will be
analyzed if the mode is not disabled(0), which is
the default mode.
The values are:
disabled(0) -- No traffic monitoring
input(1) -- traffic monitoring is activated on packets received
output(2) -- traffic monitoring is activated on packets transmitted
both(3) -- traffic monitoring is activated on packets
received and transmitted."
::= { snSwPortInfoEntry 2 }
snSwPortInfoTagMode OBJECT-TYPE
SYNTAX INTEGER {
tagged(1),
untagged(2),
auto(3),
disabled(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For tagged port, we could have multiple VLANs
per port. For untagged port or auto port, there
is only one VLAN ID per port."
::= { snSwPortInfoEntry 3 }
snSwPortInfoChnMode OBJECT-TYPE
SYNTAX INTEGER {
none(0),
halfDuplex(1),
fullDuplex(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The port can be configured to operate in either
half or full duplex mode. The values are:
halfDuplex(1)...half duplex mode
fullDuplex(2)...full duplex mode
The read-back channel status from hardware are:
none(0).........link down or port disabled.
halfDuplex(1)...half duplex mode
fullDuplex(2)...full duplex mode
The port media type (expansion or regular)
and port link type (trunk or feeder) determine
value of this object.
The port can not set to half duplex mode
if the port connect mode is m200e(4).
However, the value of this parameter may be
automatically set whenever the expansion port
is connected (e.g. cascade connecting device)."
::= { snSwPortInfoEntry 4 }
snSwPortInfoSpeed OBJECT-TYPE
SYNTAX INTEGER {
none(0),
sAutoSense(1),
s10M(2),
s100M(3),
s1G(4),
s45M(5),
s155M(6),
s10G(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The speed configuration for a port. The values are:
none(0)..........link down or no traffic.
sAutoSense(1)....Auto-sensing 10 or 100Mbits.
s10M(2)..........10Mbits per second.
s100M(3).........100Mbits per second.
s1G(4)...........1Gbits per second.
s45M(5)..........45Mbits per second (T3) (for expansion board only).
s155M(6).........155Mbits per second (ATM) (for expansion board only).
s10G(7)..........10Gbits per second.
The read-back hardware status are the following:
none(0)..........link down or no traffic.
s10M(2)..........10Mbits per second.
s100M(3).........100Mbits per second.
s1G(4)...........1Gbits per second.
s45M(5)..........45Mbits per second (T3) (for expansion board only).
s155M(6).........155Mbits per second (ATM) (for expansion board only).
s10G(7)..........10Gbits per second.
The port media type (expansion or regular)
and port link type (trunk or feeder) determine
whether this object can be written and the valid
values.
It is not allowed to change speed for trunks ports.
For expansion ports, all of the above speed
can be set.
However, the value of this parameter may be
automatically set whenever the expansion port
is connected (e.g. cascade connecting device)."
::= { snSwPortInfoEntry 5 }
snSwPortInfoMediaType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
m100BaseTX(2),
m100BaseFX(3),
m1000BaseFX(4),
mT3(5),
m155ATM(6),
m1000BaseTX(7),
m622ATM(8),
m155POS(9),
m622POS(10),
m2488POS(11),
m10000BaseFX(12)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The media type for the port. The
values are:
other(1).........other or unknown media.
m100BaseTX(2)....100Mbits per second copper.
m100BaseFX(3)....100Mbits per second fiber.
m1000BaseFX(4)...1Gbits per second fiber.
mT3(5)...........45Mbits per second (T3).
m155ATM(6).......155Mbits per second (ATM).
m1000BaseTX(7)...1Gbits per second copper.
m622ATM(8).......622Mbits per second (ATM).
m155POS(9).......155Mbits per second (POS).
m622POS(10)......622Mbits per second (POS).
m2488POS(11).....2488Mbits per second (POS).
m10000BaseFX(12).10Gbits per second fiber."
::= { snSwPortInfoEntry 6 }
snSwPortInfoConnectorType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
copper(2),
fiber(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of connector that the port offers.
The values are:
other(1)...........other or unknown connector
copper(2)..........Copper connector
fiber(3)...........Fiber connector
This describes the physical connector type"
::= { snSwPortInfoEntry 7 }
snSwPortInfoAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3) -- in some test mode
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The desired state of all ports. The
testing(3) state indicates that no operational
packets can be passed.
(same as ifAdminStatus in MIB-II)"
::= { snSwPortInfoEntry 8 }
snSwPortInfoLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3) -- in some test mode
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
(same as ifOperStatus in MIB-II)"
::= { snSwPortInfoEntry 9 }
snSwPortInfoPortQos OBJECT-TYPE
SYNTAX INTEGER {
level0(0),
level1(1),
level2(2),
level3(3),
level4(4),
level5(5),
level6(6),
level7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Stand alone stackable switch Port Qos Priority values are:
low(0) -- low prority
high(1) -- high prority.
The BigIron Port Qos Priority values are:
level0(0), level1(1), level2(2), level3(3),
level4(4), level5(5), level6(6), level7(7) "
::= { snSwPortInfoEntry 10 }
snSwPortInfoPhysAddress OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port physical address. The physical address
represents the switch port."
::= { snSwPortInfoEntry 11 }
snSwPortStatsInFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of packets received on the interface."
::= { snSwPortInfoEntry 12 }
snSwPortStatsOutFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of packets transmitted out of the interface."
::= { snSwPortInfoEntry 13 }
snSwPortStatsAlignErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"dot3StatsAlignmentErrors : A count of frames
received on a particular interface that are
not an integral number of octets in length
and do not pass the FCS check.
The count represented by an instance of this
object is incremented when the alignmentError
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions obtain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC."
::= { snSwPortInfoEntry 14 }
snSwPortStatsFCSErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"dot3StatsFCSErrors : A count of frames received
on a particular interface that are an integral
number of octets in length but do not pass the
FCS check.
The count represented by an instance of this
object is incremented when the frameCheckError
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions obtain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC."
::= { snSwPortInfoEntry 15 }
snSwPortStatsMultiColliFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"dot3StatsMultipleCollisionFrames :
A count of successfully transmitted frames on
a particular interface for which transmission
is inhibited by more than one collision.
A frame that is counted by an instance of this
object is also counted by the corresponding
instance of either the ifOutUcastPkts,
ifOutMulticastPkts, or ifOutBroadcastPkts,
and is not counted by the corresponding
instance of the dot3StatsSingleCollisionFrames
object."
::= { snSwPortInfoEntry 16 }
snSwPortStatsFrameTooLongs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"dot3StatsFrameTooLongs : A count of frames
received on a particular interface that
exceed the maximum permitted frame size.
The count represented by an instance of this
object is incremented when the frameTooLong
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions obtain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC."
::= { snSwPortInfoEntry 17 }
snSwPortStatsTxColliFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A count of successfully transmitted frames on
a particular interface for which transmission
is inhibited by more than one collision.
A frame that is counted by a combination of
both dot3StatsSingleCollisionFrames and
dot3StatsMultipleCollisionFrames objects."
::= { snSwPortInfoEntry 18 }
snSwPortStatsRxColliFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A count of successfully received frames on
a particular interface for which transmission
is inhibited by more than one collision. This
object is not specified in dot3 but it has the
same functionarity as snSwPortStatsTxColliFrames."
::= { snSwPortInfoEntry 19 }
snSwPortStatsFrameTooShorts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A count of frames received on a particular
interface that below the minimum permitted
frame size."
::= { snSwPortInfoEntry 20 }
snSwPortLockAddressCount OBJECT-TYPE
SYNTAX INTEGER (0..2048)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of source MAC addresses are allowed
for a port. Writing 0 to this object will allow
any number of addresses."
DEFVAL { 8 }
::= { snSwPortInfoEntry 21 }
snSwPortStpPortEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The enabled/disabled status of the port."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2, dot1dStpPortEnable"
::= { snSwPortInfoEntry 22 }
snSwPortDhcpGateListId OBJECT-TYPE
SYNTAX INTEGER (0..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ID for a DHCP gateway list entry relative
to this switch port. 0 = unset or no assigned ID"
::= { snSwPortInfoEntry 23 }
snSwPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Port Name string."
::= { snSwPortInfoEntry 24 }
snSwPortStatsInBcastFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of broadcast packets received on the interface."
::= { snSwPortInfoEntry 25 }
snSwPortStatsOutBcastFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of broadcast packets transmitted out of the interface."
::= { snSwPortInfoEntry 26 }
snSwPortStatsInMcastFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of multicast packets received on the interface."
::= { snSwPortInfoEntry 27 }
snSwPortStatsOutMcastFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of multicast packets transmitted out of the interface."
::= { snSwPortInfoEntry 28 }
snSwPortStatsInDiscard OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet could be to free up
buffer space."
::= { snSwPortInfoEntry 29 }
snSwPortStatsOutDiscard OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer space."
::= { snSwPortInfoEntry 30 }
snSwPortStatsMacStations OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of MAC Stations connected to the interface."
::= { snSwPortInfoEntry 31 }
snSwPortCacheGroupId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Cache Group ID for the interface."
::= { snSwPortInfoEntry 32 }
snSwPortTransGroupId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Transparent Group ID for the interface."
::= { snSwPortInfoEntry 33 }
snSwPortInfoAutoNegotiate OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1),
negFullAuto(2),
global(3),
other(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This feature only applies to Gigabit Ethernet ports. If set to
disable(0), port will be put to non-negotiation mode. If set to
enable(1), port will start auto-negotiation indefinitely until
succeed. If set to negFullAuto(2), the port will start with auto-
negotiation, if the negotiation failed, then it will automatically
switch to non-negotiation mode. Stackable products (except TurboIron
8) Gigabit Ethernet ports do not support negFullAuto(2). If set
to global(3), port negotiation mode follows the value of
snSwGlobalAutoNegotiate. Non-Gigabit Ethernet port returns
the value other(4)."
DEFVAL { global }
::= { snSwPortInfoEntry 34 }
snSwPortInfoFlowControl OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disbale port flow control."
DEFVAL { enabled }
::= { snSwPortInfoEntry 35 }
snSwPortInfoGigType OBJECT-TYPE
SYNTAX INTEGER {
m1000BaseSX(0),
m1000BaseLX(1),
m1000BaseLH(2),
m1000BaseLHA(3),
m1000BaseLHB(4),
m1000BaseTX(5),
m10000BaseSR(6),
m10000BaseLR(7),
m10000BaseER(8),
notApplicable(255)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The media type for the port. The
values are:
m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver.
m1000BaseLX(1)....1Gbits per second fiber, with a long wavelength transceiver (3km).
m1000BaseLH(2)....1Gbits per second fiber, with a special wavelength transceiver (50km).
m1000BaseLHA(3)....1Gbits per second fiber, with a special wavelength transceiver (70km).
m1000BaseLHB(4)....1Gbits per second fiber, with a special wavelength transceiver (150km).
m1000BaseTX(5)....1Gbits per second copper (100meter).
m10000BaseSR(6)....10Gbits per second fiber, with a short range wavelength transceiver (100m).
m10000BaseLR(7)....10Gbits per second fiber, with a long range wavelength transceiver (10km).
m10000BaseER(8)....10Gbits per second fiber, with a extended range wavelength transceiver (40km).
notApplicable(255)....a non-gigabit port."
::= { snSwPortInfoEntry 36 }
snSwPortStatsLinkChange OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of link state change of the interface."
::= { snSwPortInfoEntry 37 }
snSwPortIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In order to identify a particular interface, this
object shall identify the instance of the ifIndex
object, defined in RFC 1213 and RFC 1573."
::= { snSwPortInfoEntry 38 }
snSwPortDescr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A textual string containing the slot/port information
about the interface."
::= { snSwPortInfoEntry 39 }
snSwPortInOctets OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of octets received on the interface,
including framing characters. This object is a 64-bit
counter of the ifInOctets object, defined in RFC 1213.
The octet string is in big-endian byte order."
::= { snSwPortInfoEntry 40 }
snSwPortOutOctets OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of octets transmitted out of the interface,
including framing characters. This object is a 64-bit
counter of the ifOutOctets object, defined in RFC 1213.
The octet string is in big-endian byte order."
::= { snSwPortInfoEntry 41 }
snSwPortStatsInBitsPerSec OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bits per second received on the interface
over a 5 minutes interval."
::= { snSwPortInfoEntry 42 }
snSwPortStatsOutBitsPerSec OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bits per second transmitted out of the interface
over a 5 minutes interval."
::= { snSwPortInfoEntry 43 }
snSwPortStatsInPktsPerSec OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets per second received on the interface
over a 5 minutes interval."
::= { snSwPortInfoEntry 44 }
snSwPortStatsOutPktsPerSec OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets per second transmitted out of the interface
over a 5 minutes interval."
::= { snSwPortInfoEntry 45 }
snSwPortStatsInUtilization OBJECT-TYPE
SYNTAX INTEGER (0..10000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input network utilization in hundredths of a percent
over a 5 minutes interval."
::= { snSwPortInfoEntry 46 }
snSwPortStatsOutUtilization OBJECT-TYPE
SYNTAX INTEGER (0..10000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output network utilization in hundredths of a percent
over a 5 minutes interval."
::= { snSwPortInfoEntry 47 }
snSwPortFastSpanPortEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The enabled/disabled fast span port status of the port."
::= { snSwPortInfoEntry 48 }
snSwPortFastSpanUplinkEnable OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The enabled/disabled fast span uplink status of the port."
::= { snSwPortInfoEntry 49 }
snSwPortVlanId OBJECT-TYPE
SYNTAX INTEGER (0..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ID of a VLAN of which this port is a member. Port must
be untagged. For tagged port which belongs to multiple
VLANs, this object return 0 which is an invalid VLAN ID
value."
::= { snSwPortInfoEntry 50 }
snSwPortRouteOnly OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable L2 switching of a routing switch port.
By default, the routing switch performs routing first.
If routing failed, it performs switching. Enable route
only instrcuts the routing switch to perform routing
only. For a L2 switching only product, reading this
object always return 'disabled', writing 'enabled' to
this object takes no effect."
DEFVAL { disabled }
::= { snSwPortInfoEntry 51 }
snSwPortPresent OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicate if the port is absent or present.
This object only valid for M4 module
"
::= { snSwPortInfoEntry 52 }
snSwPortGBICStatus OBJECT-TYPE
SYNTAX INTEGER {
gbic(1),
miniGBIC(2),
empty(3),
other(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicate if the gig port has GBICs on them.
If set to GBIC(1), it means that the port is GBIC.
If set to miniGBIC(2), it means that the port miniGBIC.
If set to empty(3), it means that the GBIC is missing.
Value other(4) means that the port not a removable gig port.
"
::= { snSwPortInfoEntry 53 }
snSwPortStatsInKiloBitsPerSec OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bit rate in kilobits per second received on the 10G and faster interface
over a 5 minutes interval."
::= { snSwPortInfoEntry 54 }
snSwPortStatsOutKiloBitsPerSec OBJECT-TYPE
SYNTAX Unsigned32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bit rate in kilobits per second transmitted out of the 10G and faster interface
over a 5 minutes interval."
::= { snSwPortInfoEntry 55 }
snSwPortLoadInterval OBJECT-TYPE
SYNTAX INTEGER (30..300)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time in seconds for which average port utilization should be carried out.
The value should be incremental of 30 seconds, between the ranges specified."
DEFVAL { 300 }
::= { snSwPortInfoEntry 56 }
snSwPortTagType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IEEE802.1q tag type embedded in the length/type field of
an Ethernet packet. It specifies that the 2 octets after the
length/type field in an Ethernet packet is the tag value."
DEFVAL { 33024 }
::= { snSwPortInfoEntry 57 }
-- Interface ID Registration Group
snInterfaceId OBJECT IDENTIFIER ::= { snSwPortInfo 2 }
-- Interface ID to ifIndex Lookup Table
-- Given an interface ID, this table returns the ifIndex value.
--
-- Note: This table does not behave like most SNMP tables. It does not
-- support GetNext. If you try to walk the table using GetNext, no rows
-- will be returned. The contents of the table can only be accessed
-- using Get operations. The table is useful for mapping a known
-- interface to the corresponding ifIndex value.
snInterfaceLookupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnInterfaceLookupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { snSwPortInfo 3 }
snInterfaceLookupEntry OBJECT-TYPE
SYNTAX SnInterfaceLookupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
INDEX { snInterfaceLookupInterfaceId }
::= { snInterfaceLookupTable 1 }
SnInterfaceLookupEntry ::= SEQUENCE {
snInterfaceLookupInterfaceId
InterfaceId,
snInterfaceLookupIfIndex
INTEGER
}
snInterfaceLookupInterfaceId OBJECT-TYPE
SYNTAX InterfaceId
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snInterfaceLookupEntry 1 }
snInterfaceLookupIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snInterfaceLookupEntry 2 }
-- ifIndex to Interface ID Lookup Table
-- Given an ifIndex, this table returns the interface ID value.
snIfIndexLookupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIfIndexLookupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
::= { snSwPortInfo 4 }
snIfIndexLookupEntry OBJECT-TYPE
SYNTAX SnIfIndexLookupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
""
INDEX { snIfIndexLookupIfIndex }
::= { snIfIndexLookupTable 1 }
SnIfIndexLookupEntry ::= SEQUENCE {
snIfIndexLookupIfIndex
INTEGER,
snIfIndexLookupInterfaceId
InterfaceId
}
snIfIndexLookupIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snIfIndexLookupEntry 1 }
snIfIndexLookupInterfaceId OBJECT-TYPE
SYNTAX InterfaceId
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snIfIndexLookupEntry 2 }
-- Forwarding Database Group
--
-- This group contains information relevant to
-- the forwarding database in the system.
-- The Forward Database Static Table Information
--
-- This table contains all MAC addresses in the system. Static
-- stations may be configured.
snFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnFdbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains snFdb information for each station
known to the system, one entry per station."
::= { snFdbInfo 1 }
snFdbEntry OBJECT-TYPE
SYNTAX SnFdbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry represents the information of a static MAC station."
INDEX {
snFdbStationIndex
}
::= { snFdbTable 1 }
SnFdbEntry ::= SEQUENCE {
snFdbStationIndex
INTEGER,
snFdbStationAddr
PhysAddress,
snFdbStationPort
INTEGER,
snFdbVLanId
INTEGER,
snFdbStationQos
INTEGER,
snFdbStationType
INTEGER,
snFdbRowStatus
INTEGER
}
snFdbStationIndex OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The FDB Station index to the Fdb Station Table."
::= { snFdbEntry 1 }
snFdbStationAddr OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The snFdbs physical address. The physical address
represents a MAC Station."
::= { snFdbEntry 2 }
snFdbStationPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Station slot/port number.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number (slot for chassis only)."
::= { snFdbEntry 3 }
snFdbVLanId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Station VLan ID."
::= { snFdbEntry 4 }
snFdbStationQos OBJECT-TYPE
SYNTAX INTEGER {
level0(0),
level1(1),
level2(2),
level3(3),
level4(4),
level5(5),
level6(6),
level7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Stand alone stackable station Qos Priority values are:
low(0) -- low prority
high(1) -- high prority.
The BigIron switch station Priority values are:
level0(0), level1(1), level2(2), level3(3),
level4(4), level5(5), level6(6), level7(7) "
::= { snFdbEntry 5 }
snFdbStationType OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
host(1),
router(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The station type values are:
notSupported -- a read value only : this product does not
support MultiLayer Switching.
host -- any MAC station.
router -- a router-typed station."
::= { snFdbEntry 6 }
snFdbRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
other(1)....some other case
valid(2)....the row exists and is valid"
::= { snFdbEntry 7 }
-- Port STP Configuration Group
snPortStpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnPortStpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A specific snPortStpTable consists of a number of
switch ports. This table only exists if only if
snVLanByPortTable exists and snVLanByPortStpMode is
enabled for each VLAN."
::= { snPortStpInfo 1 }
snPortStpEntry OBJECT-TYPE
SYNTAX SnPortStpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the snPortStpTable indicates the
configuration on a specified port. A SNMP SET PDU
for a row of the snPortStpTable requires the entired
sequence of the MIB Objects in each
snPortStpEntry stored in one PDU. Otherwise,
GENERR return-value will be returned."
INDEX {
snPortStpVLanId,
snPortStpPortNum
}
::= { snPortStpTable 1 }
SnPortStpEntry ::= SEQUENCE {
snPortStpVLanId
INTEGER,
snPortStpPortNum
INTEGER,
snPortStpPortPriority
INTEGER,
snPortStpPathCost
INTEGER,
snPortStpOperState
INTEGER,
snPortStpPortEnable
INTEGER,
snPortStpPortForwardTransitions
Counter,
snPortStpPortState
INTEGER,
snPortStpPortDesignatedCost
INTEGER,
snPortStpPortDesignatedRoot
BridgeId,
snPortStpPortDesignatedBridge
BridgeId,
snPortStpPortDesignatedPort
OCTET STRING
}
snPortStpVLanId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VLAN ID of the VLAN switch community."
::= { snPortStpEntry 1 }
snPortStpPortNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port number of the Switch.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number (slot for chassis only)."
::= { snPortStpEntry 2 }
snPortStpPortPriority OBJECT-TYPE
SYNTAX INTEGER (8..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
dot1dStpPort."
::= { snPortStpEntry 3 }
snPortStpPathCost OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"dot1dStpPortPathCost : The contribution of this
port to the path cost of paths towards the spanning
tree root which include this port. 802.1D-1990
recommends that the default value of this parameter
be in inverse proportion to the speed of the
attached LAN. Writing value zero to this object
sets path cost to a default value which automatically
changes according to port speed. Reading value zero
indicates an unknown path cost value because port
speed cannot be determined due to speed auto sense
in progress."
::= { snPortStpEntry 4 }
snPortStpOperState OBJECT-TYPE
SYNTAX INTEGER {
notActivated(0),
activated(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"By default, this mode is set to notActivated(0).
notActivated(0)...the Port STP entry is not activated and not in running mode.
activated(1)......the Port STP entry is activated and in running mode"
::= { snPortStpEntry 5 }
snPortStpPortEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The enabled/disabled status of the port."
::= { snPortStpEntry 6 }
snPortStpPortForwardTransitions OBJECT-TYPE
SYNTAX Counter
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The number of times this port has transitioned
from the Learning state to the Forwarding state."
::= { snPortStpEntry 7 }
snPortStpPortState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
broken(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will place that
port into the broken(6) state. For ports which
are disabled (see dot1dStpPortEnable), this object
will have a value of disabled(1)."
::= { snPortStpEntry 8 }
snPortStpPortDesignatedCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs."
::= { snPortStpEntry 9 }
snPortStpPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached."
::= { snPortStpEntry 10 }
snPortStpPortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment."
::= { snPortStpEntry 11 }
snPortStpPortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Port Identifier of the port on the Designated
Bridge for this port's segment."
::= { snPortStpEntry 12 }
-- Trunk Port Configuration Group
snTrunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnTrunkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A specific snTrunkTable consists of a number of
Trunk port-mask."
::= { snTrunkInfo 1 }
snTrunkEntry OBJECT-TYPE
SYNTAX SnTrunkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the snTrunkTable indicates the
configuration on a specified Trunk port membership."
INDEX {
snTrunkIndex
}
::= { snTrunkTable 1 }
SnTrunkEntry ::= SEQUENCE {
snTrunkIndex
INTEGER,
snTrunkPortMask
PortMask,
snTrunkType
INTEGER
}
snTrunkIndex OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of the trunk entries can be configured."
::= { snTrunkEntry 1 }
snTrunkPortMask OBJECT-TYPE
SYNTAX PortMask
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Trunk membership of the Switch."
::= { snTrunkEntry 2 }
snTrunkType OBJECT-TYPE
SYNTAX INTEGER {
switch(1),
server(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The trunk connection type which specifies what
device the trunk ports are connected to."
::= { snTrunkEntry 3 }
-- Multi-slot Trunk Port Configuration Group
snMSTrunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMSTrunkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table contains the configuration of port members of
multi-slot trunk groups."
::= { snTrunkInfo 2 }
snMSTrunkEntry OBJECT-TYPE
SYNTAX SnMSTrunkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the snMSTrunkTable."
INDEX {snMSTrunkPortIndex}
::= { snMSTrunkTable 1 }
SnMSTrunkEntry ::= SEQUENCE {
snMSTrunkPortIndex
INTEGER,
snMSTrunkPortList
OCTET STRING,
snMSTrunkType
INTEGER,
snMSTrunkRowStatus
INTEGER
}
snMSTrunkPortIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The primary port of a trunk group. For module with Gig ports,
primary port is port 1, 3, 5, 7. For module with 10/100 ports,
primary port is port 1, 5, 9, 13, 17, 21."
::= { snMSTrunkEntry 1 }
snMSTrunkPortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A list of port indices which are the port membership
of a trunk group. Each port index is a 16-bit integer
in big endian order. The first port index must be the
primary port index."
::= { snMSTrunkEntry 2 }
snMSTrunkType OBJECT-TYPE
SYNTAX INTEGER {
switch(1),
server(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The trunk connection type which specifies what
device the trunk ports are connected to."
::= { snMSTrunkEntry 3 }
snMSTrunkRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a table entry."
::= { snMSTrunkEntry 4 }
-- Switch Configuration Summary Group
snSwSummaryMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Switch Group Configuration Summary is configured
either enabled or disabled and the
default is disabled mode.
enabled(1)...........activate Switch Configuration Summary.
disabled(0)..........no Switch Configuration Summary."
::= { snSwSummary 1 }
--- DHCP Gateway List Table
snDhcpGatewayListTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnDhcpGatewayListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of DHCP gateway list of addresses."
::= { snDhcpGatewayListInfo 1 }
snDhcpGatewayListEntry OBJECT-TYPE
SYNTAX SnDhcpGatewayListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP Port Address table."
INDEX { snDhcpGatewayListId }
::= { snDhcpGatewayListTable 1 }
SnDhcpGatewayListEntry ::= SEQUENCE {
snDhcpGatewayListId
INTEGER,
snDhcpGatewayListAddrList
OCTET STRING,
snDhcpGatewayListRowStatus
INTEGER
}
snDhcpGatewayListId OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID for a DHCP gateway list entry."
::= { snDhcpGatewayListEntry 1 }
snDhcpGatewayListAddrList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The DHCP gateway address list for each DHCP gateway list ID.
This list contains 1 to 8 IP addresses represented by octet string."
::= { snDhcpGatewayListEntry 2 }
snDhcpGatewayListRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row or modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
other(1)....some other case
valid(2)....the row exists and is valid"
::= { snDhcpGatewayListEntry 3 }
-- DNS MIB Group
snDnsDomainName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"DNS Domain Name string."
::= { snDnsInfo 1 }
snDnsGatewayIpAddrList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The DNS Gateway IP address list. This list contains 4
IP addresses represented by octet string."
::= { snDnsInfo 2 }
-- MAC filter table
snMacFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMacFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"MAC filter table."
::= { snMacFilter 1 }
snMacFilterEntry OBJECT-TYPE
SYNTAX SnMacFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the MAC filter table."
INDEX { snMacFilterIndex }
::= { snMacFilterTable 1 }
SnMacFilterEntry ::= SEQUENCE {
snMacFilterIndex
INTEGER,
snMacFilterAction
INTEGER,
snMacFilterSourceMac
MacAddress,
snMacFilterSourceMask
MacAddress,
snMacFilterDestMac
MacAddress,
snMacFilterDestMask
MacAddress,
snMacFilterOperator
INTEGER,
snMacFilterFrameType
INTEGER,
snMacFilterFrameTypeNum
INTEGER,
snMacFilterRowStatus
INTEGER
}
snMacFilterIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a filter entry."
::= { snMacFilterEntry 1 }
snMacFilterAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the Mac packet match
with this filter."
::= { snMacFilterEntry 2 }
snMacFilterSourceMac OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source MAC address."
::= { snMacFilterEntry 3 }
snMacFilterSourceMask OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source MAC subnet mask."
::= { snMacFilterEntry 4 }
snMacFilterDestMac OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination MAC address."
::= { snMacFilterEntry 5 }
snMacFilterDestMask OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination MAC subnet mask."
::= { snMacFilterEntry 6 }
snMacFilterOperator OBJECT-TYPE
SYNTAX INTEGER { equal(0), notEqual(1), less(2), greater(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Type of comparison to perform."
::= { snMacFilterEntry 7 }
snMacFilterFrameType OBJECT-TYPE
SYNTAX INTEGER{ notUsed(0), ethernet(1), llc(2), snap(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Frame Type: ethernet-type, LLC and SNAP types"
::= { snMacFilterEntry 8 }
snMacFilterFrameTypeNum OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Frame Type Number. 0 means NA"
::= { snMacFilterEntry 9 }
snMacFilterRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snMacFilterEntry 10 }
-- MAC Filter Port access table
snMacFilterPortAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnMacFilterPortAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"MAC Filter port access table."
::= { snMacFilter 2 }
snMacFilterPortAccessEntry OBJECT-TYPE
SYNTAX SnMacFilterPortAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the MAC Filter Port access table."
INDEX { snMacFilterPortAccessPortIndex }
::= { snMacFilterPortAccessTable 1 }
SnMacFilterPortAccessEntry ::= SEQUENCE {
snMacFilterPortAccessPortIndex
INTEGER,
snMacFilterPortAccessFilters
OCTET STRING,
snMacFilterPortAccessRowStatus
INTEGER
}
snMacFilterPortAccessPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..3900)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port index.
For FastIron/NetIron products, port index value is from 1 to 42
For BigIron products, port index is an encoded number:
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number.
For virtual router interface, slot number is 15,
port number is the virtual router port from 1 to 60.
Therefore, port index value for BigIron is from 257 to 3900."
::= { snMacFilterPortAccessEntry 1 }
snMacFilterPortAccessFilters OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"1st octet correspond to 1st filter
number and so on."
::= { snMacFilterPortAccessEntry 2 }
snMacFilterPortAccessRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snMacFilterPortAccessEntry 3 }
-- NTP general group
snNTPGeneral OBJECT IDENTIFIER ::= { snNTP 1 }
snNTPPollInterval OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Interval specifies how often to poll the NTP server.
Each unit is one second."
DEFVAL { 1800 }
::= { snNTPGeneral 1 }
snNTPTimeZone OBJECT-TYPE
SYNTAX INTEGER {
alaska(0),
aleutian(1),
arizona(2),
central(3),
eastIndiana(4),
eastern(5),
hawaii(6),
michigan(7),
mountain(8),
pacific(9),
samoa(10),
gmtPlus12(11),
gmtPlus11(12),
gmtPlus10(13),
gmtPlus9(14),
gmtPlus8(15),
gmtPlus7(16),
gmtPlus6(17),
gmtPlus5(18),
gmtPlus4(19),
gmtPlus3(20),
gmtPlus2(21),
gmtPlus1(22),
gmt(23),
gmtMinus1(24),
gmtMinus2(25),
gmtMinus3(26),
gmtMinus4(27),
gmtMinus5(28),
gmtMinus6(29),
gmtMinus7(30),
gmtMinus8(31),
gmtMinus9(32),
gmtMinus10(33),
gmtMinus11(34),
gmtMinus12(35) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Time zone."
DEFVAL { gmt }
::= { snNTPGeneral 2 }
snNTPSummerTimeEnable OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled (1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable daylight saving time. This enables daylight
saving time for time/date starting 02:00:00 of first Sunday
in April and ending 02:00:00 of last Sunday in October every
year."
DEFVAL { disabled }
::= { snNTPGeneral 3 }
snNTPSystemClock OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (7))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"System clock, in the following format:
octet 0: seconds after the minute [0-60]
octet 1: minutes after the hour [0-59]
octet 2: hours since midnight [0-23]
octet 3: day of the month [1-31]
octet 4: months since January [0-11]
octet 5: years since 1900
octet 6: days since Sunday [0-6]
Setting this object requires valid value in octets 0 to 5,
and zero in octet 6. System clock can be disabled by setting
zero to all octets."
::= { snNTPGeneral 4 }
snNTPSync OBJECT-TYPE
SYNTAX INTEGER { other(1), synchronize(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Initiate time synchronization to the NTP servers.
For set operation, only 'synchronize(2)' is accepted.
For get operation, always return 'other(1)'."
::= { snNTPGeneral 5 }
-- NTP server table
snNTPServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnNTPServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"NTP (Network Time Protocol) server table."
::= { snNTP 2 }
snNTPServerEntry OBJECT-TYPE
SYNTAX SnNTPServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the NTP server table."
INDEX { snNTPServerIp }
::= { snNTPServerTable 1 }
SnNTPServerEntry ::= SEQUENCE {
snNTPServerIp
IpAddress,
snNTPServerVersion
INTEGER,
snNTPServerRowStatus
INTEGER
}
snNTPServerIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"NTP server IP address."
::= { snNTPServerEntry 1 }
snNTPServerVersion OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"NTP server version."
DEFVAL { 1 }
::= { snNTPServerEntry 2 }
snNTPServerRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a NTP server table entry."
::= { snNTPServerEntry 3 }
-- Radius general group
snRadiusGeneral OBJECT IDENTIFIER ::= { snRadius 1 }
snRadiusSNMPAccess OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicate whether Radius group MIB obejcts can be
accessed by SNMP manager. If value is disabled,
all Radius group MIB objects return 'general error'."
DEFVAL { disabled }
::= { snRadiusGeneral 1 }
snRadiusEnableTelnetAuth OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable telnet authentication specified
by 'snRadiusLoginMethod'."
DEFVAL { disabled }
::= { snRadiusGeneral 2 }
snRadiusRetransmit OBJECT-TYPE
SYNTAX INTEGER (0..5)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of authentication query retransmissions
to the Radius server."
DEFVAL { 3 }
::= { snRadiusGeneral 3 }
snRadiusTimeOut OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Interval specifies how long to wait for authentication
reply from the Radius server, each unit is one second."
DEFVAL { 3 }
::= { snRadiusGeneral 4 }
snRadiusDeadTime OBJECT-TYPE
SYNTAX INTEGER (1..5)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Interval specifies Radius server dead time,
each unit is one minute."
DEFVAL { 3 }
::= { snRadiusGeneral 5 }
snRadiusKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Authentication key displayed as encrypted text."
::= { snRadiusGeneral 6 }
snRadiusLoginMethod OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..7))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A sequence of authentication methods. Each octet represents
a method to authenticate the user login process. Each octet
has the following enumeration value:
enable(1) - authenticate by command line interface
enable password
radius(2) - authenticate by requesting radius server
local(3) - authenticate by local user account table
line(4) - authenticate by telnet password
tacplus(5) - authenticate by requesting tacplus server
none(6) - do not authenticate
tacacs(7) - authenticate by requesting tacacs server
Setting a zero length octet string invalidates all
previous authentication methods."
::= { snRadiusGeneral 7 }
snRadiusEnableMethod OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..7))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A sequence of authentication methods. Each octet represents
a method to authenticate the user entering priviledge mode
of the command line interface. Each octet has the following
enumeration value:
enable(1) - authenticate by command line interface
enable password
radius(2) - authenticate by requesting radius server
local(3) - authenticate by local user account table
line(4) - authenticate by telnet password
tacplus(5) - authenticate by requesting tacplus server
none(6) - do not authenticate
tacacs(7) - authenticate by requesting tacacs server
Setting a zero length octet string invalidates all
previous authentication methods."
::= { snRadiusGeneral 8 }
snRadiusWebServerMethod OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..7))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A sequence of authentication methods. Each octet represents
a method to authenticate the user accessing the web-server.
Each octet has the following enumeration value:
enable(1) - authenticate by command line interface
enable password
radius(2) - authenticate by requesting radius server
local(3) - authenticate by local user account table
line(4) - authenticate by telnet password
tacplus(5) - authenticate by requesting tacplus server
none(6) - do not authenticate
tacacs(7) - authenticate by requesting tacacs server
Setting a zero length octet string invalidates all
previous authentication methods."
::= { snRadiusGeneral 9 }
snRadiusSNMPServerMethod OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..7))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A sequence of authentication methods. Each octet represents
a method to authenticate the user accessing the snmp-server.
Each octet has the following enumeration value:
enable(1) - authenticate by command line interface
enable password
radius(2) - authenticate by requesting radius server
local(3) - authenticate by local user account table
line(4) - authenticate by telnet password
tacplus(5) - authenticate by requesting tacplus server
none(6) - do not authenticate
tacacs(7) - authenticate by requesting tacacs server
Setting a zero length octet string invalidates all
previous authentication methods."
::= { snRadiusGeneral 10 }
-- Radius server table
snRadiusServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRadiusServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Radius server table."
::= { snRadius 2 }
snRadiusServerEntry OBJECT-TYPE
SYNTAX SnRadiusServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Radius server table."
INDEX { snRadiusServerIp }
::= { snRadiusServerTable 1 }
SnRadiusServerEntry ::= SEQUENCE {
snRadiusServerIp
IpAddress,
snRadiusServerAuthPort
INTEGER,
snRadiusServerAcctPort
INTEGER,
snRadiusServerRowStatus
INTEGER,
snRadiusServerRowKey
DisplayString,
snRadiusServerUsage
INTEGER
}
snRadiusServerIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Radius server IP address."
::= { snRadiusServerEntry 1 }
snRadiusServerAuthPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Authentication UDP port number."
DEFVAL { 1645 }
::= { snRadiusServerEntry 2 }
snRadiusServerAcctPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Account UDP port number."
DEFVAL { 1646 }
::= { snRadiusServerEntry 3 }
snRadiusServerRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a Radius server table entry."
::= { snRadiusServerEntry 4 }
snRadiusServerRowKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Authentication key displayed as encrypted text."
::= { snRadiusServerEntry 5 }
snRadiusServerUsage OBJECT-TYPE
SYNTAX INTEGER {
default(1),
authentication-only(2),
authorization-only(3),
accounting-only(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To allow this server to be dedicated for a particular AAA activity."
::= { snRadiusServerEntry 6 }
--- Tacacs General MIBs
snTacacsGeneral OBJECT IDENTIFIER ::= { snTacacs 1 }
snTacacsRetransmit OBJECT-TYPE
SYNTAX INTEGER (0..5)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of authentication query retransmissions
to the Tacacs server."
DEFVAL { 3 }
::= { snTacacsGeneral 1 }
snTacacsTimeOut OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Interval specifies how long to wait for authentication
reply from the Tacacs server, each unit is one second."
DEFVAL { 3 }
::= { snTacacsGeneral 2 }
snTacacsDeadTime OBJECT-TYPE
SYNTAX INTEGER (1..5)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Interval specifies Tacacs server dead time,
each unit is one minute."
DEFVAL { 3 }
::= { snTacacsGeneral 3 }
snTacacsKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Authentication key displayed as encrypted text."
::= { snTacacsGeneral 4 }
snTacacsSNMPAccess OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicate whether Tacacs group MIB obejcts can be
accessed by SNMP manager. If value is disabled,
all Tacacs group MIB objects return 'general error'."
DEFVAL { disabled }
::= { snTacacsGeneral 5 }
-- Tacacs server table
snTacacsServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnTacacsServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Tacacs server table."
::= { snTacacs 2 }
snTacacsServerEntry OBJECT-TYPE
SYNTAX SnTacacsServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Tacacs server table."
INDEX { snTacacsServerIp }
::= { snTacacsServerTable 1 }
SnTacacsServerEntry ::= SEQUENCE {
snTacacsServerIp
IpAddress,
snTacacsServerAuthPort
INTEGER,
snTacacsServerRowStatus
INTEGER,
snTacacsServerRowKey
DisplayString,
snTacacsServerUsage
INTEGER
}
snTacacsServerIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tacacs server IP address."
::= { snTacacsServerEntry 1 }
snTacacsServerAuthPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Authentication UDP port number."
DEFVAL { 49 }
::= { snTacacsServerEntry 2 }
snTacacsServerRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a Tacacs server table entry."
::= { snTacacsServerEntry 3 }
snTacacsServerRowKey OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Authentication key displayed as encrypted text."
::= { snTacacsServerEntry 4 }
snTacacsServerUsage OBJECT-TYPE
SYNTAX INTEGER {
default(1),
authentication-only(2),
authorization-only(3),
accounting-only(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To allow this server to be dedicated for a particular AAA activity."
::= { snTacacsServerEntry 5 }
-- QOS Profile Group
snQosProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnQosProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table contains the configuration of qos profile
groups."
::= { snQos 1 }
snQosProfileEntry OBJECT-TYPE
SYNTAX SnQosProfileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the snQosProfileTable."
INDEX {snQosProfileIndex}
::= { snQosProfileTable 1 }
SnQosProfileEntry ::= SEQUENCE {
snQosProfileIndex
INTEGER,
snQosProfileName
DisplayString,
snQosProfileRequestedBandwidth
INTEGER,
snQosProfileCalculatedBandwidth
INTEGER
}
snQosProfileIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index of QOS Profile."
::= { snQosProfileEntry 1 }
snQosProfileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Qos Profile Name string."
::= { snQosProfileEntry 2 }
snQosProfileRequestedBandwidth OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Qos Profile Requested Bandwidth."
::= { snQosProfileEntry 3 }
snQosProfileCalculatedBandwidth OBJECT-TYPE
SYNTAX INTEGER (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Qos Profile Calculated Bandwidth."
::= { snQosProfileEntry 4 }
-- QOS Bind Group
snQosBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnQosBindEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table contains the configuration of 802.1p to qos profile
binding groups."
::= { snQos 2 }
snQosBindEntry OBJECT-TYPE
SYNTAX SnQosBindEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the snQosBindTable."
INDEX {snQosBindIndex}
::= { snQosBindTable 1 }
SnQosBindEntry ::= SEQUENCE {
snQosBindIndex
INTEGER,
snQosBindPriority
INTEGER,
snQosBindProfileIndex
INTEGER
}
snQosBindIndex OBJECT-TYPE
SYNTAX INTEGER (1..8)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index of QOS Bind."
::= { snQosBindEntry 1 }
snQosBindPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"QOS bind priority."
::= { snQosBindEntry 2 }
snQosBindProfileIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"QOS Bind Profile Index. This is pointer to the
index of snQosProfile Table."
::= { snQosBindEntry 3 }
-- AAA Mib
snAuthentication OBJECT IDENTIFIER ::= { snAAA 1 }
snAuthorization OBJECT IDENTIFIER ::= { snAAA 2 }
snAccounting OBJECT IDENTIFIER ::= { snAAA 3 }
snAuthorizationCommandMethods OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..3))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A sequence of authorization methods. Each octet represents
a method to authorize the user command. Each octet
has the following value:
radius(2) - authorize by requesting radius server
tacplus(5) - authorize by requesting tacplus server
none(6) - skip authorization
Setting a zero length octet string invalidates all
previous authorization methods."
::= { snAuthorization 1 }
snAuthorizationCommandLevel OBJECT-TYPE
SYNTAX INTEGER {
level0(0),
level4(4),
level5(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Commands, which are equal to and less than the specified
command level here needs to be authorized. Possible enumeration
values:
0 - Privilege level 0
4 - Privilege level 4
5 - Privilege level 5."
::= { snAuthorization 2 }
snAuthorizationExec OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..3))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A sequence of exec authorization methods. Each octet represents
a method for telnet or SSH login authorization. Each octet
has the following enumeration value:
radius(2) - send exec authorization request to radius server
tacplus(5) - send exec authorization request to tacplus server
none(6) - no exec authorization
Setting a zero length octet string invalidates all
authorization methods."
::= { snAuthorization 3 }
snAccountingCommandMethods OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..3))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A sequence of accounting methods. Each octet represents
a method to account for the user command. Each octet
has the following enumeration value:
radius(2) - send accounting info to radius server
tacplus(5) - send accounting info to tacplus server
none(6) - skip accounting
Setting a zero length octet string invalidates all
previous accounting methods."
::= { snAccounting 1 }
snAccountingCommandLevel OBJECT-TYPE
SYNTAX INTEGER {
level0(0),
level4(4),
level5(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Commands, which are equal to and less than the specified
command level here will be accounted. Possible enumeration
values:
level0 - Privilege level 0
level4 - Privilege level 4
level5 - Privilege level 5."
::= { snAccounting 2 }
snAccountingExec OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..3))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A sequence of accounting methods. Each octet represents
a method for telnet or SSH login accounting. Each octet
has the following enumeration value:
radius(2) - send accounting info to radius server
tacplus(5) - send accounting info to tacplus server
none(6) - skip accounting
Setting a zero length octet string invalidates all
previous accounting methods."
::= { snAccounting 3 }
snAccountingSystem OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..3))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A sequence of accounting methods. Each octet represents
a method to account for the system related events. Each octet
has the following enumeration value:
radius(2) - send accounting info to radius server
tacplus(5) - send accounting info to tacplus server
none(6) - skip accounting
Setting a zero length octet string invalidates all
previous accounting methods."
::= { snAccounting 4 }
-- NetFlow Mib
snNetFlowGlb OBJECT IDENTIFIER ::= { snNetFlow 1 }
snNetFlowGblEnable OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable NetFlow export operation."
DEFVAL { disabled }
::= { snNetFlowGlb 1 }
snNetFlowGblVersion OBJECT-TYPE
SYNTAX INTEGER { version1 (1), version5 (5) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"NetFlow export version."
DEFVAL { version5 }
::= { snNetFlowGlb 2 }
snNetFlowGblProtocolDisable OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"bit 0 - other, disable all protocols export except UDP and TCP
bit 1 - tcp, disable TCP protocol export
bit 2 - udp, disable UDP protocol export"
DEFVAL { 0 }
::= { snNetFlowGlb 3 }
snNetFlowGblActiveTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum time an active flow can be in the NetFlow cache (minutes: 1..60)"
DEFVAL { 60 }
::= { snNetFlowGlb 4 }
snNetFlowGblInactiveTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum time an inactive flow can be in the NetFlow cache (seconds: 10..600)"
DEFVAL { 60 }
::= { snNetFlowGlb 5 }
-- NetFlow Collector Table
snNetFlowCollectorTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnNetFlowCollectorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of each NetFlow collector information."
::= { snNetFlow 2 }
snNetFlowCollectorEntry OBJECT-TYPE
SYNTAX SnNetFlowCollectorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the NetFlow collector table."
INDEX { snNetFlowCollectorIndex }
::= { snNetFlowCollectorTable 1 }
SnNetFlowCollectorEntry ::= SEQUENCE {
snNetFlowCollectorIndex
INTEGER,
snNetFlowCollectorIp
IpAddress,
snNetFlowCollectorUdpPort
INTEGER,
snNetFlowCollectorSourceInterface
INTEGER,
snNetFlowCollectorRowStatus
INTEGER
}
snNetFlowCollectorIndex OBJECT-TYPE
SYNTAX INTEGER (1..10)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the NetFlow collector table."
::= { snNetFlowCollectorEntry 1 }
snNetFlowCollectorIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The NetFlow collector ip address."
::= { snNetFlowCollectorEntry 2 }
snNetFlowCollectorUdpPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The NetFlow collector UDP port number."
::= { snNetFlowCollectorEntry 3 }
snNetFlowCollectorSourceInterface OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ifIndex value to specify source port to
export NetFlow packet. Value 0 to indicate
default outgoing port."
::= { snNetFlowCollectorEntry 4 }
snNetFlowCollectorRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a NetFlow collector table entry."
::= { snNetFlowCollectorEntry 5 }
-- NetFlow Aggregation Table
snNetFlowAggregationTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnNetFlowAggregationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of each NetFlow aggregation scheme information."
::= { snNetFlow 3 }
snNetFlowAggregationEntry OBJECT-TYPE
SYNTAX SnNetFlowAggregationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the NetFlow Aggregation table."
INDEX { snNetFlowAggregationIndex }
::= { snNetFlowAggregationTable 1 }
SnNetFlowAggregationEntry ::= SEQUENCE {
snNetFlowAggregationIndex
INTEGER,
snNetFlowAggregationIp
IpAddress,
snNetFlowAggregationUdpPort
INTEGER,
snNetFlowAggregationSourceInterface
INTEGER,
snNetFlowAggregationNumberOfCacheEntries
INTEGER,
snNetFlowAggregationActiveTimeout
INTEGER,
snNetFlowAggregationInactiveTimeout
INTEGER,
snNetFlowAggregationEnable
INTEGER,
snNetFlowAggregationRowStatus
INTEGER
}
snNetFlowAggregationIndex OBJECT-TYPE
SYNTAX INTEGER { as (1), protocolPort (2), destPrefix (3),
sourcePrefix (4), prefix (5) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Aggregation scheme ID"
::= { snNetFlowAggregationEntry 1 }
snNetFlowAggregationIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The NetFlow aggregation collector ip address."
::= { snNetFlowAggregationEntry 2 }
snNetFlowAggregationUdpPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The NetFlow aggregation collector UDP port number."
::= { snNetFlowAggregationEntry 3 }
snNetFlowAggregationSourceInterface OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ifIndex value to specify source port to
export NetFlow aggregation packet.
Value 0 to indicate default outgoing port."
::= { snNetFlowAggregationEntry 4 }
snNetFlowAggregationNumberOfCacheEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of cache entries for aggregation scheme"
::= { snNetFlowAggregationEntry 5 }
snNetFlowAggregationActiveTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum time an active flow can be in
the aggregation cache"
::= { snNetFlowAggregationEntry 6 }
snNetFlowAggregationInactiveTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum time an inactive flow can be in
the aggregation cache"
::= { snNetFlowAggregationEntry 7 }
snNetFlowAggregationEnable OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable NetFlow aggregation
for this aggregation scheme."
DEFVAL { disabled }
::= { snNetFlowAggregationEntry 8 }
snNetFlowAggregationRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a NetFlow collector table entry."
::= { snNetFlowAggregationEntry 9 }
-- NetFlow Interface Table
-- Table containing information about the switching
-- type in every interface.
snNetFlowIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnNetFlowIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of interface entries. The number of entries
is given by the value of ifNumber."
::= { snNetFlow 4 }
snNetFlowIfEntry OBJECT-TYPE
SYNTAX SnNetFlowIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry containing the type of switching performed
on that interface."
INDEX { snNetFlowIfIndex }
::= { snNetFlowIfTable 1 }
SnNetFlowIfEntry ::= SEQUENCE {
snNetFlowIfIndex
INTEGER,
snNetFlowIfFlowSwitching
INTEGER
}
snNetFlowIfIndex OBJECT-TYPE
SYNTAX INTEGER (1..65536)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initialization of the entity's network
management system to the next re-initialization."
::= { snNetFlowIfEntry 1 }
snNetFlowIfFlowSwitching OBJECT-TYPE
SYNTAX INTEGER { disabled (0), enabled (1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To enable/disable flow switching in a particular
interface:
disable (0) - no flow switching
enable (1) - flow switching"
::= { snNetFlowIfEntry 2 }
-- sFlow Collector Table.
snSFlowGlb OBJECT IDENTIFIER ::= { snSFlow 1 }
snSflowCollectorTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnSflowCollectorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of all but first sFlow collectors. The first collector can be configured
using sFlowTable in RFC 3176. The RFC cannot be used to configure more
than one sFlow collectors. This table has been created to fill this gap."
::= { snSFlow 2 }
snSflowCollectorEntry OBJECT-TYPE
SYNTAX SnSflowCollectorEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the sFlow collector table."
INDEX { snSflowCollectorIndex }
::= { snSflowCollectorTable 1 }
SnSflowCollectorEntry ::= SEQUENCE {
snSflowCollectorIndex
INTEGER,
snSflowCollectorIP
IpAddress,
snSflowCollectorUDPPort
INTEGER,
snSflowCollectorRowStatus
INTEGER
}
snSflowCollectorIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the sFlow collector table."
::= { snSflowCollectorEntry 1 }
snSflowCollectorIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The sFlow collector ip address."
::= { snSflowCollectorEntry 2 }
snSflowCollectorUDPPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The sFlow collector UDP port number."
::= { snSflowCollectorEntry 3 }
snSflowCollectorRowStatus OBJECT-TYPE
SYNTAX INTEGER {
noSuch(0),
other(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create, update or delete a SFlow collector table entry.
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
other(1)....some other case
valid(2)....the row exists and is valid"
::= { snSflowCollectorEntry 4 }
snFdpMIBObjects OBJECT IDENTIFIER ::= { snFDP 1 }
snFdpInterface OBJECT IDENTIFIER ::= { snFdpMIBObjects 1 }
snFdpCache OBJECT IDENTIFIER ::= { snFdpMIBObjects 2 }
snFdpGlobal OBJECT IDENTIFIER ::= { snFdpMIBObjects 3 }
snFdpCachedAddr OBJECT IDENTIFIER ::= { snFdpMIBObjects 4 }
--
-- FDP Interface Group
--
snFdpInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdpInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Status of FDP on the device's interfaces."
::= { snFdpInterface 1 }
snFdpInterfaceEntry OBJECT-TYPE
SYNTAX FdpInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the snFdpInterfaceTable,
having the status of FDP on an interface."
INDEX { snFdpInterfaceIfIndex }
::= { snFdpInterfaceTable 1 }
FdpInterfaceEntry ::= SEQUENCE {
snFdpInterfaceIfIndex INTEGER,
snFdpInterfaceFdpEnable INTEGER,
snFdpInterfaceCdpEnable INTEGER
}
snFdpInterfaceIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"ifIndex value of the local interface."
::= { snFdpInterfaceEntry 1 }
snFdpInterfaceFdpEnable OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The flag, whether the Foundry Discovery Protocol
is currently running on this interface. It has no
effect when FDP is disabled (snFdpGlobalRun = FALSE)."
DEFVAL { true }
::= { snFdpInterfaceEntry 2 }
snFdpInterfaceCdpEnable OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The flag, whether the Cisco Discovery Protocol
is currently running on this interface. It has no
effect when CDP is disabled (snCdpGlobalRun = FALSE)."
DEFVAL { true }
::= { snFdpInterfaceEntry 3 }
--
-- FDP Cache Table
--
snFdpCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdpCacheEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table for the cached information obtained
via receiving FDP/CDP messages."
::= { snFdpCache 1 }
snFdpCacheEntry OBJECT-TYPE
SYNTAX FdpCacheEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the snFdpCacheTable, having the information
received via FDP/CDP on one interface from one device.
Entries appear when a FDP/CDP advertisement is received
from a neighbor device.
Entries disappear when FDP/CDP is disabled on the interface, or globally."
INDEX { snFdpCacheIfIndex, snFdpCacheDeviceIndex }
::= { snFdpCacheTable 1 }
FdpCacheEntry ::= SEQUENCE {
snFdpCacheIfIndex INTEGER,
snFdpCacheDeviceIndex INTEGER,
snFdpCacheDeviceId DisplayString,
snFdpCacheAddressType INTEGER,
snFdpCacheAddress OCTET STRING,
snFdpCacheVersion DisplayString,
snFdpCacheDevicePort DisplayString,
snFdpCachePlatform DisplayString,
snFdpCacheCapabilities DisplayString,
snFdpCacheVendorId INTEGER,
snFdpCacheIsAggregateVlan INTEGER,
snFdpCacheTagType INTEGER,
snFdpCachePortVlanMask OCTET STRING,
snFdpCachePortTagMode INTEGER,
snFdpCacheDefaultTrafficeVlanIdForDualMode INTEGER
}
snFdpCacheIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"ifIndex value of the local interface."
::= { snFdpCacheEntry 1 }
snFdpCacheDeviceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Identification of a device, which sent FDP/CDP messages"
::= { snFdpCacheEntry 2 }
snFdpCacheDeviceId OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Device-ID string as reported in the most recent FDP/CDP
message. The zero-length string indicates no Device-ID
field (TLV) was reported in the most recent FDP/CDP
message."
::= { snFdpCacheEntry 3 }
snFdpCacheAddressType OBJECT-TYPE
SYNTAX INTEGER { ip(1), ipx(2), appletalk(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An indication of the type of address contained in the
corresponding instance of snFdpCacheAddress."
::= { snFdpCacheEntry 4 }
snFdpCacheAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The (first) network-layer address of the device
as reported in the most recent FDP/CDP message
in the following format:
IP address: 4 octets, ip(1)
IPX address: 10 octets, ipx(2)
First 4-octet as the network number
Second 6-octet as the host number
Appletalk address: 3 octets, appletalk(3)
First 2-octet as the network number
Second 1-octet as the host number"
::= { snFdpCacheEntry 5 }
snFdpCacheVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Version string as reported in the most recent FDP/CDP message. "
::= { snFdpCacheEntry 6 }
snFdpCacheDevicePort OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Port-ID string as reported in the most recent FDP/CDP
message. This will typically be the value of the ifName
object (e.g., Ethernet0). The zero-length string
indicates no Port-ID field (TLV) was reported in the
most recent FDP/CDP message."
::= { snFdpCacheEntry 7 }
snFdpCachePlatform OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Device's Hardware Platform as reported in the most
recent FDP/CDP message. The zero-length string indicates
that no Platform field (TLV) was reported in the most
recent FDP/CDP message."
::= { snFdpCacheEntry 8 }
snFdpCacheCapabilities OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Device's Functional Capabilities as reported in the
most recent FDP/CDP message. "
::= { snFdpCacheEntry 9 }
snFdpCacheVendorId OBJECT-TYPE
SYNTAX INTEGER { fdp(1), cdp(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the entry received by either FDP or CDP."
::= { snFdpCacheEntry 10 }
snFdpCacheIsAggregateVlan OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Neighbor device is in aggregated-vlan."
::= { snFdpCacheEntry 11 }
snFdpCacheTagType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Neighbor device tag-type."
::= { snFdpCacheEntry 12 }
snFdpCachePortVlanMask OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Neighbor device port VLAN masks in 512-byte octet string."
::= { snFdpCacheEntry 13 }
snFdpCachePortTagMode OBJECT-TYPE
SYNTAX INTEGER { untagged(1), tagged(2), dual(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Neighbor device port tag mode"
::= { snFdpCacheEntry 14 }
snFdpCacheDefaultTrafficeVlanIdForDualMode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Default traffic vlan id for neighbor device dual-mode port"
::= { snFdpCacheEntry 15 }
--
-- FDP Global Group
--
snFdpGlobalRun OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The flag, whether the Foundry Discovery Protocol
is currently running. FDP entries in snFdpCacheTable are
deleted when FDP is disabled."
DEFVAL { false }
::= { snFdpGlobal 1 }
snFdpGlobalMessageInterval OBJECT-TYPE
SYNTAX INTEGER (5..900)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interval at which FDP messages are to be generated.
The default value is 60 seconds."
DEFVAL { 60 }
::= { snFdpGlobal 2 }
snFdpGlobalHoldTime OBJECT-TYPE
SYNTAX INTEGER (10..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time for the receiving device holds FDP message.
The default value is 180 seconds."
DEFVAL { 180 }
::= { snFdpGlobal 3 }
snFdpGlobalCdpRun OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An indication of whether the Cisco Discovery Protocol
is currently running. CDP entries in snFdpCacheTable are
deleted when CDP is disabled."
DEFVAL { false }
::= { snFdpGlobal 4 }
--
-- FDP Cached Address Entry Table
--
snFdpCachedAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdpCachedAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Cached address table from receiving FDP/CDP messages."
::= { snFdpCachedAddr 1 }
snFdpCachedAddressEntry OBJECT-TYPE
SYNTAX FdpCachedAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the snFdpCacheAddressTable,
containing one cached address from FDP/CDP messages."
INDEX { snFdpCachedAddrIfIndex, snFdpCachedAddrDeviceIndex, snFdpCachedAddrDeviceAddrEntryIndex }
::= { snFdpCachedAddressTable 1 }
FdpCachedAddressEntry ::= SEQUENCE {
snFdpCachedAddrIfIndex INTEGER,
snFdpCachedAddrDeviceIndex INTEGER,
snFdpCachedAddrDeviceAddrEntryIndex INTEGER,
snFdpCachedAddrType INTEGER,
snFdpCachedAddrValue OCTET STRING
}
snFdpCachedAddrIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The ifIndex value of the local interface."
::= { snFdpCachedAddressEntry 1 }
snFdpCachedAddrDeviceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A unique vlaue for each device from which FDP/CDP messages
are being received."
::= { snFdpCachedAddressEntry 2 }
snFdpCachedAddrDeviceAddrEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A unique vlaue for address entry in device from which FDP/CDP messages
are being received."
::= { snFdpCachedAddressEntry 3 }
snFdpCachedAddrType OBJECT-TYPE
SYNTAX INTEGER { ip(1), ipx(2), appletalk(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An indication of the type of address contained in the
corresponding instance of snFdpCacheAddrValue."
::= { snFdpCachedAddressEntry 4 }
snFdpCachedAddrValue OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The network-layer address of the device
SNMP-agent as reported in the most recent FDP/CDP message
in the following format:
IP address: 4 octets, ip(1)
IPX address: 10 octets, ipx(2)
First 4-octet as the network number
Second 6-octet as the host number
Appletalk address: 3 octets, appletalk(3)
First 2-octet as the network number
Second 1-octet as the host number"
::= { snFdpCachedAddressEntry 5 }
END
HP-SN-IP-VRRP-MIB DEFINITIONS ::= BEGIN
-- Foundry SnRouter Group MIB Release 1.0.0
-- Revision 0 1/7/97
-- Revision 1 6/5/02
-- Revision 2 08/10/02
-- Copyright 1996-97 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry Networks SNMP Management Information Base
-- Specification embodies Foundry Networks' confidential and
-- proprietary intellectual property. Foundry Networks retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS," and Foundry Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
-- SECTION 1: Top Level Definitions
-- Imports
IMPORTS
IpAddress, Counter
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
ifIndex FROM IF-MIB
snVrrp FROM HP-SN-ROOT-MIB ;
MacAddress ::=
OCTET STRING (SIZE(6))
-- This data type is used to model media addresses. For many
-- types of media, this will be in a binary representation.
-- For example, an ethernet address would be represented as
-- a string of 6 octets.
snVrrpGlobal OBJECT IDENTIFIER ::= { snVrrp 1 }
snVrrpIntf OBJECT IDENTIFIER ::= { snVrrp 2 }
snVrrpVirRtr OBJECT IDENTIFIER ::= { snVrrp 3 }
snVrrpIntf2 OBJECT IDENTIFIER ::= { snVrrp 4 }
snVrrpVirRtr2 OBJECT IDENTIFIER ::= { snVrrp 5 }
-- VRRP and VRRP-Extended MIBs
-- Section 1: VRRP Global Variables
snVrrpGroupOperMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The VRRP is configured on this system
either enabled or disabled and the
default is disabled mode.
disabled(0)..........disable VRRP
enabled(1)...........activate VRRP"
::= { snVrrpGlobal 1 }
snVrrpIfStateChangeTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the SNMP agent process is
permitted to generate vrrp and vrrpe interface state change
traps."
DEFVAL { enabled }
::= { snVrrpGlobal 2 }
snVrrpIfMaxNumVridPerIntf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the maximum number of VRID per interface."
::= { snVrrpGlobal 3 }
snVrrpIfMaxNumVridPerSystem OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the maximum number of VRID per system."
::= { snVrrpGlobal 4 }
snVrrpClearVrrpStat OBJECT-TYPE
SYNTAX INTEGER { normal(0), clear(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clear VRRP statistics command."
::= { snVrrpGlobal 5 }
snVrrpGroupOperModeVrrpextended OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION "The VRRP_extended is configured on this system either enabled
or disabled and the default is disabled mode.
disabled(0)..........disable VRRP extended
enabled(1)...........activate VRRP extended"
::= { snVrrpGlobal 6 }
-- Section 2: VRRP Interface Table
-- The following table is deprecated by snVrrpIf2Table, which is
-- ifIndex based table
snVrrpIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnVrrpIfEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The VRRP Interface Table describes the interfaces from
the viewpoint of VRRP."
::= { snVrrpIntf 1 }
snVrrpIfEntry OBJECT-TYPE
SYNTAX SnVrrpIfEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The VRRP Interface Entry describes one interface from
the viewpoint of VRRP."
INDEX { snVrrpIfPort }
::= { snVrrpIfTable 1 }
SnVrrpIfEntry ::=
SEQUENCE {
snVrrpIfPort
INTEGER,
snVrrpIfAuthType
INTEGER,
snVrrpIfAuthPassword
OCTET STRING,
snVrrpIfRxHeaderErrCnts
Counter,
snVrrpIfRxAuthTypeErrCnts
Counter,
snVrrpIfRxAuthPwdMismatchErrCnts
Counter,
snVrrpIfRxVridErrCnts
Counter
}
snVrrpIfPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The IP port of this VRRP interface."
::= { snVrrpIfEntry 1 }
snVrrpIfAuthType OBJECT-TYPE
SYNTAX INTEGER {
noAuth(0),
simpleTextPasswd(1),
ipAuthHeader(2)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The authentication type of this interface."
::= { snVrrpIfEntry 2 }
snVrrpIfAuthPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The simple text password is allowed if only if
the snVrrpIfAuthType type is simpleTextPasswd(1)."
::= { snVrrpIfEntry 3 }
snVrrpIfRxHeaderErrCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The received Header error counts in this interface."
::= { snVrrpIfEntry 4 }
snVrrpIfRxAuthTypeErrCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The received authentication type error counts in this interface."
::= { snVrrpIfEntry 5 }
snVrrpIfRxAuthPwdMismatchErrCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The received authentication password mismatched error counts in this interface."
::= { snVrrpIfEntry 6 }
snVrrpIfRxVridErrCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The received unfound VRID error counts in this interface."
::= { snVrrpIfEntry 7 }
-- Section 3: VRRP and VRRP-Extended Interface Table,
-- this is a modified vrrp/vrrpe interface table with ifIndex.
-- NOTE: Protocols VRRPE and VRRP-Extended are one and the same.
snVrrpIf2Table OBJECT-TYPE
SYNTAX SEQUENCE OF SnVrrpIf2Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The VRRP and VRRPE Interface Table describes the interfaces from
the viewpoint of VRRP and VRRPE."
::= { snVrrpIntf2 1 }
snVrrpIf2Entry OBJECT-TYPE
SYNTAX SnVrrpIf2Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The VRRP and VRRPE Interface Entry describes one interface from
the viewpoint of VRRP and VRRPE."
INDEX { ifIndex}
::= { snVrrpIf2Table 1 }
SnVrrpIf2Entry ::=
SEQUENCE {
snVrrpIf2AuthType
INTEGER,
snVrrpIf2AuthPassword
OCTET STRING,
snVrrpIf2RxHeaderErrCnts
Counter,
snVrrpIf2RxAuthTypeErrCnts
Counter,
snVrrpIf2RxAuthPwdMismatchErrCnts
Counter,
snVrrpIf2RxVridErrCnts
Counter
}
snVrrpIf2AuthType OBJECT-TYPE
SYNTAX INTEGER {
noAuth(0),
simpleTextPasswd(1),
ipAuthHeader(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The authentication type of this interface."
::= { snVrrpIf2Entry 1 }
snVrrpIf2AuthPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The simple text password is allowed if only if
the snVrrpIf2AuthType type is simpleTextPasswd(1)."
::= { snVrrpIf2Entry 2 }
snVrrpIf2RxHeaderErrCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The received Header error counts in this interface."
::= { snVrrpIf2Entry 3 }
snVrrpIf2RxAuthTypeErrCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The received authentication type error counts in this interface."
::= { snVrrpIf2Entry 4 }
snVrrpIf2RxAuthPwdMismatchErrCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The received authentication password mismatched error counts in this interface."
::= { snVrrpIf2Entry 5 }
snVrrpIf2RxVridErrCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The received unfound VRID error counts in this interface."
::= { snVrrpIf2Entry 6 }
-- Section 4: VRRP virtual Router Configuration Table.
-- The VRRP (Virtual Router Redundancy Protocol) Virtual Router Table augments
-- with VRRP specific information.
-- The following table is deprecated by snVrrpVirRtr2Table, which is
-- ifIndex based table
snVrrpVirRtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnVrrpVirRtrEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The VRRP virtual router Entry describes one virtual router from
the viewpoint of VRRP."
::= { snVrrpVirRtr 1 }
snVrrpVirRtrEntry OBJECT-TYPE
SYNTAX SnVrrpVirRtrEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The VRRP virtual router Entry describes one virtual router from
the viewpoint of VRRP."
INDEX { snVrrpVirRtrPort, snVrrpVirRtrId }
::= { snVrrpVirRtrTable 1 }
SnVrrpVirRtrEntry ::=
SEQUENCE {
snVrrpVirRtrPort
INTEGER,
snVrrpVirRtrId
INTEGER,
snVrrpVirRtrOwnership
INTEGER,
snVrrpVirRtrCfgPriority
INTEGER,
snVrrpVirRtrTrackPriority
INTEGER,
snVrrpVirRtrCurrPriority
INTEGER,
snVrrpVirRtrHelloInt
INTEGER,
snVrrpVirRtrDeadInt
INTEGER,
snVrrpVirRtrPreemptMode
INTEGER,
snVrrpVirRtrState
INTEGER,
snVrrpVirRtrActivate
INTEGER,
snVrrpVirRtrIpAddrMask
OCTET STRING,
snVrrpVirRtrTrackPortMask
OCTET STRING,
snVrrpVirRtrTrackVifMask
OCTET STRING,
snVrrpVirRtrRowStatus
INTEGER,
snVrrpVirRtrRxArpPktDropCnts
Counter,
snVrrpVirRtrRxIpPktDropCnts
Counter,
snVrrpVirRtrRxPortMismatchCnts
Counter,
snVrrpVirRtrRxNumOfIpMismatchCnts
Counter,
snVrrpVirRtrRxIpMismatchCnts
Counter,
snVrrpVirRtrRxHelloIntMismatchCnts
Counter,
snVrrpVirRtrRxPriorityZeroFromMasterCnts
Counter,
snVrrpVirRtrRxHigherPriorityCnts
Counter,
snVrrpVirRtrTransToMasterStateCnts
Counter,
snVrrpVirRtrTransToBackupStateCnts
Counter,
snVrrpVirRtrCurrDeadInt
INTEGER,
snVrrpVirRtrTrackPortList
OCTET STRING,
snVrrpVirRtrTrackVifPortList
OCTET STRING
}
snVrrpVirRtrPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The IP port of this VRRP interface."
::= { snVrrpVirRtrEntry 1 }
snVrrpVirRtrId OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"One of the virtual router ID of this VRRP interface."
::= { snVrrpVirRtrEntry 2 }
snVrrpVirRtrOwnership OBJECT-TYPE
SYNTAX INTEGER {
incomplete(0),
owner(1),
backup(2)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The ownership of this VRRP router interface
can be set either owner(1) or backup(2).
VirRtr SNMP-GET returns incomplete(0), it means
no IP address has assigned to this VRRP router interface."
::= { snVrrpVirRtrEntry 3 }
snVrrpVirRtrCfgPriority OBJECT-TYPE
SYNTAX INTEGER (3..254)
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The higher the number the higher the priority is.
This parameter decides which backup router should becomes
the Active Router for the interface. A backup Router with
higher priority selected to becomes the Active Router.
Therefore, this Object can be set if only if snVrrpVirRtrOwnership
is set to backup(2)."
DEFVAL { 100 }
::= { snVrrpVirRtrEntry 4 }
snVrrpVirRtrTrackPriority OBJECT-TYPE
SYNTAX INTEGER (1..254)
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The higher the number the higher the priority is.
after this object is configured, the snVrrpVirRtrCurrPriority
of this interface will be adjusted dynamically with this
track priority when the Track Port states first
changes from UP to DOWN."
::= { snVrrpVirRtrEntry 5 }
snVrrpVirRtrCurrPriority OBJECT-TYPE
SYNTAX INTEGER (1..254)
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The higher the number the higher the priority is.
This object will be adjusted dynamically with the
track priority when the Track Port states first
changes from UP to DOWN."
::= { snVrrpVirRtrEntry 6 }
snVrrpVirRtrHelloInt OBJECT-TYPE
SYNTAX INTEGER (1..84)
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Time interval between advertisements (seconds)."
DEFVAL { 1 }
::= { snVrrpVirRtrEntry 7 }
snVrrpVirRtrDeadInt OBJECT-TYPE
SYNTAX INTEGER (1..84)
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Dead interval (seconds)."
DEFVAL { 1 }
::= { snVrrpVirRtrEntry 8 }
snVrrpVirRtrPreemptMode OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This mode controls whether a higher priority Backup router
preempts a lower priority Master. The mode with enabled(1)
allow preemption and disabled(0) prohibit preemption."
DEFVAL { enabled }
::= { snVrrpVirRtrEntry 9 }
snVrrpVirRtrState OBJECT-TYPE
SYNTAX INTEGER {
init(0),
master(1),
backup(2)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object specifies the VRRP Router's interface state as:
init(0)...initialization state.
master(1)...master state.
backup(2)...backup state."
::= { snVrrpVirRtrEntry 10 }
snVrrpVirRtrActivate OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies the VRRP Router's activate command as:
disabled(0)...deactivate this VRRP Router.
enabled(1)....activate this VRRP Router."
::= { snVrrpVirRtrEntry 11 }
snVrrpVirRtrIpAddrMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(64))
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The numbers of IP Addresses of this virtual router of this interface."
::= { snVrrpVirRtrEntry 12 }
snVrrpVirRtrTrackPortMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..32))
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies the identity of the physical port
whose state is to be monitored. Each bit is a port of
the system. Default value is 0. VirRtr this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The Chassis/Stackable router VRRP Track port membership.
The size of the OCTET STRING for Chassis is 32.
The size of the OCTET STRING for Stackable is 4.
(It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackPortList)"
::= { snVrrpVirRtrEntry 13 }
snVrrpVirRtrTrackVifMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..512))
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies the identity of the virtual interface
whose state is to be monitored. Each bit is a port of
the system. Default value is 0. VirRtr this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The Chassis/Stackable router VRRP Track port membership
The size of the OCTET STRING for Chassis is 8.
The size of the OCTET STRING for Stackable is 4.
(It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackVifPortList)"
::= { snVrrpVirRtrEntry 14 }
snVrrpVirRtrRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an existing row
VirRtr the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snVrrpVirRtrEntry 15 }
snVrrpVirRtrRxArpPktDropCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The received VRRP ARP Packet Drop Counts."
::= { snVrrpVirRtrEntry 16 }
snVrrpVirRtrRxIpPktDropCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The received VRRP IP Packet Drop Counts."
::= { snVrrpVirRtrEntry 17 }
snVrrpVirRtrRxPortMismatchCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The received VRRP Port mismatching Counts."
::= { snVrrpVirRtrEntry 18 }
snVrrpVirRtrRxNumOfIpMismatchCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The received VRRP Number of IP Addresses mismatching Counts."
::= { snVrrpVirRtrEntry 19 }
snVrrpVirRtrRxIpMismatchCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The received VRRP IP Address mismatching Counts."
::= { snVrrpVirRtrEntry 20 }
snVrrpVirRtrRxHelloIntMismatchCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The counts of the virtual router interface with hello interval mismatch counts."
::= { snVrrpVirRtrEntry 21 }
snVrrpVirRtrRxPriorityZeroFromMasterCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The counts of the virtual router interface with Priority zero from the master."
::= { snVrrpVirRtrEntry 22 }
snVrrpVirRtrRxHigherPriorityCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The counts of the virtual router interface with higher Priority."
::= { snVrrpVirRtrEntry 23 }
snVrrpVirRtrTransToMasterStateCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The counts of the virtual router interface transition to master state."
::= { snVrrpVirRtrEntry 24 }
snVrrpVirRtrTransToBackupStateCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The counts of the virtual router interface transition to backup state."
::= { snVrrpVirRtrEntry 25 }
snVrrpVirRtrCurrDeadInt OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"Current Dead interval (in 100 milliseconds)."
::= { snVrrpVirRtrEntry 26 }
snVrrpVirRtrTrackPortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies the identity of the physical port
whose state is to be monitored. Each port index is a
16-bit integer in big endian order. 8-bit is the slot
number, the other 8-bit is the port number. Default value
is 0 length octet string. If this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The router VRRP physical track port membership."
::= { snVrrpVirRtrEntry 27 }
snVrrpVirRtrTrackVifPortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies the identity of the virtual interface
whose state is to be monitored. Each port index is a
16-bit integer in big endian order. Default value
is 0 length octet string. If this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The router VRRP virtual port track membership."
::= { snVrrpVirRtrEntry 28 }
-- Section 5: VRRP and VRRPE Virtual Router Configuration Table, ifIndex based
-- The VRRP(Virtual Router Redundancy Protocol, rfc 2338 based, made an
-- enhancement!) and VRRPE (Virtual Router Redundancy Protocol hp extended)
-- configuration.
-- Added snVrrpVirRtr2CurrDeadInt, snVrrpVirRtr2AdvertiseBackup, SnVrrpVirRtr2VirtualMacAddr
-- SnVrrpVirRtr2IpAddrCount, SnVrrpVirRtr2MasterIpAddr as new objects
-- and deleted port masks objects and virtual interface track port list.
snVrrpVirRtr2Table OBJECT-TYPE
SYNTAX SEQUENCE OF SnVrrpVirRtr2Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Vrrp and Vrrpe virtual router Entry describes one virtual router from
the viewpoint of Vrrp and Vrrpe."
::= { snVrrpVirRtr2 1 }
snVrrpVirRtr2Entry OBJECT-TYPE
SYNTAX SnVrrpVirRtr2Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Vrrp and Vrrpe virtual router Entry describes one virtual router from
the viewpoint of Vrrp and Vrrpe."
INDEX { ifIndex, snVrrpVirRtr2Id }
::= { snVrrpVirRtr2Table 1 }
SnVrrpVirRtr2Entry ::=
SEQUENCE {
snVrrpVirRtr2Id
INTEGER,
snVrrpVirRtr2Ownership
INTEGER,
snVrrpVirRtr2CfgPriority
INTEGER,
snVrrpVirRtr2TrackPriority
INTEGER,
snVrrpVirRtr2CurrPriority
INTEGER,
snVrrpVirRtr2HelloInt
INTEGER,
snVrrpVirRtr2DeadInt
INTEGER,
snVrrpVirRtr2PreemptMode
INTEGER,
snVrrpVirRtr2State
INTEGER,
snVrrpVirRtr2IpAddrMask
OCTET STRING,
snVrrpVirRtr2Activate
INTEGER,
snVrrpVirRtr2BackupInt
INTEGER,
snVrrpVirRtr2RowStatus
INTEGER,
snVrrpVirRtr2RxArpPktDropCnts
Counter,
snVrrpVirRtr2RxIpPktDropCnts
Counter,
snVrrpVirRtr2RxPortMismatchCnts
Counter,
snVrrpVirRtr2RxNumOfIpMismatchCnts
Counter,
snVrrpVirRtr2RxIpMismatchCnts
Counter,
snVrrpVirRtr2RxHelloIntMismatchCnts
Counter,
snVrrpVirRtr2RxPriorityZeroFromMasterCnts
Counter,
snVrrpVirRtr2RxHigherPriorityCnts
Counter,
snVrrpVirRtr2TransToMasterStateCnts
Counter,
snVrrpVirRtr2TransToBackupStateCnts
Counter,
snVrrpVirRtr2CurrDeadInt
INTEGER,
snVrrpVirRtr2TrackPortList
OCTET STRING,
snVrrpVirRtr2AdvertiseBackup
INTEGER,
snVrrpVirRtr2MasterIpAddr
IpAddress,
snVrrpVirRtr2IpAddrCount
INTEGER,
snVrrpVirRtr2VirtualMacAddr
MacAddress
}
snVrrpVirRtr2Id OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"One of the virtual router ID of this Vrrp and Vrrpe interface."
::= { snVrrpVirRtr2Entry 1 }
snVrrpVirRtr2Ownership OBJECT-TYPE
SYNTAX INTEGER {
incomplete(0),
owner(1),
backup(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ownership of this Vrrp router interface
can be set either owner(1) or backup(2).
VirRtr SNMP-GET returns incomplete(0), it means
no IP address has assigned to this Vrrp router interface.
vrrpe protocol has no owner(1), can only be set to backup(2) or incomplete(0)."
::= { snVrrpVirRtr2Entry 2 }
snVrrpVirRtr2CfgPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specifies the priority to be used for the
virtual router master election process. Higher values imply
higher priority.
A priority of '0', although not settable, is sent by
the master router to indicate that this router has ceased
to participate in VRRP and a backup virtual router should
transition to become a new master.
A priority of 255 is only for VRRP - owner. Not valid for number to
configure VRRPE."
DEFVAL { 100 }
::= { snVrrpVirRtr2Entry 3 }
snVrrpVirRtr2TrackPriority OBJECT-TYPE
SYNTAX INTEGER (1..254)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The higher the number the higher the priority is.
after this object is configured, the snVrrpVirRtr2CurrPriority
of this interface will be adjusted dynamically with this
track priority when the Track Port states first
changes from UP to DOWN."
::= { snVrrpVirRtr2Entry 4 }
snVrrpVirRtr2CurrPriority OBJECT-TYPE
SYNTAX INTEGER (1..254)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The higher the number the higher the priority is.
This object will be adjusted dynamically with the
track priority when the Track Port states first
changes from UP to DOWN."
::= { snVrrpVirRtr2Entry 5 }
snVrrpVirRtr2HelloInt OBJECT-TYPE
SYNTAX INTEGER (1..84)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Time interval between advertisements (seconds)."
DEFVAL { 1 }
::= { snVrrpVirRtr2Entry 6 }
snVrrpVirRtr2DeadInt OBJECT-TYPE
SYNTAX INTEGER (0..84)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Dead interval (seconds)."
DEFVAL { 1 }
::= { snVrrpVirRtr2Entry 7 }
snVrrpVirRtr2PreemptMode OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This mode controls whether a higher priority Backup router
preempts a lower priority Master. The mode with enabled(1)
allow preemption and disabled(0) prohibit preemption."
DEFVAL { enabled }
::= { snVrrpVirRtr2Entry 8 }
snVrrpVirRtr2State OBJECT-TYPE
SYNTAX INTEGER {
init(0),
master(1),
backup(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object specifies the Vrrp and vrrpe Router's interface state as:
init(0)...initialization state.
master(1)...master state.
backup(2)...backup state."
::= { snVrrpVirRtr2Entry 9}
snVrrpVirRtr2IpAddrMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The numbers of IP Addresses of this virtual router of this interface."
::= { snVrrpVirRtr2Entry 10 }
snVrrpVirRtr2Activate OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specifies the Vrrp Router's activate command as:
disabled(0)...deactivate this Vrrp and Vrrpe Routers.
enabled(1)....activate this Vrrp and Vrrpe Routers."
::= { snVrrpVirRtr2Entry 11 }
snVrrpVirRtr2BackupInt OBJECT-TYPE
SYNTAX INTEGER (60..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Time interval between backup routers hello message advertisements (seconds)."
DEFVAL { 60 }
::= { snVrrpVirRtr2Entry 12 }
snVrrpVirRtr2RowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an existing row
VirRtr the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snVrrpVirRtr2Entry 13 }
snVrrpVirRtr2RxArpPktDropCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The received Vrrp and Vrrpe ARP Packet Drop Counts."
::= { snVrrpVirRtr2Entry 14 }
snVrrpVirRtr2RxIpPktDropCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The received Vrrp and Vrrpe IP Packet Drop Counts."
::= { snVrrpVirRtr2Entry 15 }
snVrrpVirRtr2RxPortMismatchCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The received Vrrp and Vrrpe Port mismatching Counts."
::= { snVrrpVirRtr2Entry 16 }
snVrrpVirRtr2RxNumOfIpMismatchCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The received Vrrp and Vrrpe Number of IP Addresses mismatching Counts."
::= { snVrrpVirRtr2Entry 17 }
snVrrpVirRtr2RxIpMismatchCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The received Vrrp and Vrrpe IP Address mismatching Counts."
::= { snVrrpVirRtr2Entry 18 }
snVrrpVirRtr2RxHelloIntMismatchCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counts of the virtual router interface with hello interval mismatch counts."
::= { snVrrpVirRtr2Entry 19 }
snVrrpVirRtr2RxPriorityZeroFromMasterCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counts of the virtual router interface with Priority zero from the master."
::= { snVrrpVirRtr2Entry 20 }
snVrrpVirRtr2RxHigherPriorityCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counts of the virtual router interface with higher Priority."
::= { snVrrpVirRtr2Entry 21 }
snVrrpVirRtr2TransToMasterStateCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counts of the virtual router interface transition to master state."
::= { snVrrpVirRtr2Entry 22 }
snVrrpVirRtr2TransToBackupStateCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counts of the virtual router interface transition to backup state."
::= { snVrrpVirRtr2Entry 23 }
snVrrpVirRtr2CurrDeadInt OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current Dead interval (in 100 milliseconds)."
::= { snVrrpVirRtr2Entry 24 }
snVrrpVirRtr2TrackPortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specifies the identity of the physical port and virtual ports
whose state is to be monitored. Each port index is
an ifIndex, if there are consecutive 4 or more ifIndex then
they will be encoded like below.
Encoding and decoding scheme is range based:
Each range prefix with 0000 (2 octets) where 0000 is not valid
ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2
octets of higher range ifIndex. Individual(non range) ones will be displayed as it is.
Ex:
port list: 0001..0005 0015 0032..0047
Port list in PDU: 0000 0001 0005 000f 0000 0020 002f.
If this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The router VRRP and VRRP-E physical track port membership."
::= { snVrrpVirRtr2Entry 25 }
snVrrpVirRtr2AdvertiseBackup OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set Advertise this backup router to master "
DEFVAL { disabled }
::= { snVrrpVirRtr2Entry 26 }
snVrrpVirRtr2MasterIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The master router's real/virtual (primary) IP address. This is
the IP address listed as the source in VRRP and VRRPE advertisement
last received by this virtual router."
::= { snVrrpVirRtr2Entry 27 }
snVrrpVirRtr2IpAddrCount OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of IP addresses that are associated with this
virtual router. This number is equal to the number of rows
in the vrrpAssoIpAddrTable that correspond to a given IF
index/VRID pair."
::= { snVrrpVirRtr2Entry 28 }
snVrrpVirRtr2VirtualMacAddr OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The virtual MAC address of the virtual router. Although this
object can be derived from the 'snVrrpVirRtr2VrId' object, it is
defined so that it is easily obtainable by a management
application and can be included in VRRP-related SNMP traps."
::= { snVrrpVirRtr2Entry 29 }
END
HP-SN-VSRP-MIB DEFINITIONS ::= BEGIN
-- Foundry SnRouter Group MIB Release 1.0.0
-- Revision 1 6/5/02
-- Revision 2 08/15/02
-- Copyright 1996-97 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry Networks SNMP Management Information Base
-- Specification embodies Foundry Networks' confidential and
-- proprietary intellectual property. Foundry Networks retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS," and Foundry Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
-- SECTION 1: Top Level Definitions
-- Imports
IMPORTS
Counter FROM RFC1155-SMI
IpAddress, Counter FROM RFC1155-SMI
snVsrp FROM HP-SN-SWITCH-GROUP-MIB;
MacAddress ::=
OCTET STRING (SIZE(6))
-- This data type is used to model media addresses. For many
-- types of media, this will be in a binary representation.
-- For example, an ethernet address would be represented as
-- a string of 6 octets.
snVsrpGlobal OBJECT IDENTIFIER ::= { snVsrp 1 }
snVsrpIfIntf OBJECT IDENTIFIER ::= { snVsrp 2 }
snVsrpVirRtr OBJECT IDENTIFIER ::= { snVsrp 3 }
-- Section 1: VSRP Global Variables
snVsrpGroupOperModeVsrp OBJECT-TYPE
SYNTAX INTEGER
{ disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "The VSRP is configured on this system either enabled or
disabled and thedefault is disabled mode.
disabled(0)..........disable VSRP
enabled(1)...........activate VSRP"
::= { snVsrpGlobal 1 }
snVsrpIfStateChangeTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the SNMP agent process is
permitted to generate VSRP interface state change
traps."
DEFVAL { enabled }
::= { snVsrpGlobal 2 }
snVsrpIfMaxNumVridPerIntf OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the maximum number of VRID per interface."
::= { snVsrpGlobal 3 }
snVsrpIfMaxNumVridPerSystem OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the maximum number of VRID per system."
::= { snVsrpGlobal 4 }
snVsrpClearVrrpStat OBJECT-TYPE
SYNTAX INTEGER { normal(0), clear(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clear VSRP statistics command."
::= { snVsrpGlobal 5 }
-- Section 2: VSRP Interface Table, new table with vlan_id as an index,
snVsrpIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnVsrpIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The VSRP Interface Table describes the interfaces from
the viewpoint of VSRP."
::= { snVsrpIfIntf 1 }
snVsrpIfEntry OBJECT-TYPE
SYNTAX SnVsrpIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The VSRP Interface Entry describes one interface from
the viewpoint of VSRP."
INDEX { snVsrpIfVlanId}
::= { snVsrpIfTable 1 }
SnVsrpIfEntry ::=
SEQUENCE {
snVsrpIfVlanId
INTEGER,
snVsrpIfAuthType
INTEGER,
snVsrpIfAuthPassword
OCTET STRING
}
snVsrpIfVlanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vlan index."
::= { snVsrpIfEntry 1 }
snVsrpIfAuthType OBJECT-TYPE
SYNTAX INTEGER {
noAuth(0),
simpleTextPasswd(1),
ipAuthHeader(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The authentication type of this interface."
::= { snVsrpIfEntry 2 }
snVsrpIfAuthPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..7))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The simple text password is allowed if only if
the snVsrpIfAuthType type is simpleTextPasswd."
::= { snVsrpIfEntry 3 }
-- Section 3: VSRP Virtual Router Configuration Table
-- The vsrp Virtual Router Table augments with vsrp specific information.
snVsrpVirRtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnVsrpVirRtrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The vsrp virtual router Entry describes one virtual router from
the viewpoint of vsrp."
::= { snVsrpVirRtr 1 }
snVsrpVirRtrEntry OBJECT-TYPE
SYNTAX SnVsrpVirRtrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The vsrp virtual router Entry describes one virtual router from
the viewpoint of vsrp."
INDEX { snVsrpVirRtrVlanId, snVsrpVirRtrId }
::= { snVsrpVirRtrTable 1 }
SnVsrpVirRtrEntry ::=
SEQUENCE {
snVsrpVirRtrVlanId
INTEGER,
snVsrpVirRtrId
INTEGER,
snVsrpVirRtrOwnership
INTEGER,
snVsrpVirRtrCfgPriority
INTEGER,
snVsrpVirRtrTrackPriority
INTEGER,
snVsrpVirRtrCurrPriority
INTEGER,
snVsrpVirRtrHelloInt
INTEGER,
snVsrpVirRtrDeadInt
INTEGER,
snVsrpVirRtrPreemptMode
INTEGER,
snVsrpVirRtrState
INTEGER,
snVsrpVirRtrIpAddrMask
OCTET STRING,
snVsrpVirRtrActivate
INTEGER,
snVsrpVirRtrTrackPortList
OCTET STRING,
snVsrpVirRtrAdvertiseBackup
INTEGER,
snVsrpVirRtrHoldDownInt
INTEGER,
snVsrpVirRtrInitTtl
INTEGER,
snVsrpVirRtrIncPortList
OCTET STRING,
snVsrpVirRtrSave
INTEGER,
snVsrpVirRtrBackupInt
INTEGER,
snVsrpVirRtrRowStatus
INTEGER,
snVsrpVirRtrRxArpPktDropCnts
Counter,
snVsrpVirRtrRxIpPktDropCnts
Counter,
snVsrpVirRtrRxPortMismatchCnts
Counter,
snVsrpVirRtrRxNumOfIpMismatchCnts
Counter,
snVsrpVirRtrRxIpMismatchCnts
Counter,
snVsrpVirRtrRxHelloIntMismatchCnts
Counter,
snVsrpVirRtrRxPriorityZeroFromMasterCnts
Counter,
snVsrpVirRtrRxHigherPriorityCnts
Counter,
snVsrpVirRtrTransToMasterStateCnts
Counter,
snVsrpVirRtrTransToBackupStateCnts
Counter,
snVsrpVirRtrCurrDeadInt
INTEGER,
snVsrpVirRtrCurHelloInt
INTEGER,
snVsrpVirRtrCurHoldDownInt
INTEGER,
snVsrpVirRtrCurInitTtl
INTEGER,
snVsrpVirRtrHelloMacAddress
MacAddress,
snVsrpVirRtrMasterIpAddr
IpAddress
}
snVsrpVirRtrVlanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vlan index."
::= { snVsrpVirRtrEntry 1 }
snVsrpVirRtrId OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"One of the virtual router ID of this vsrp interface."
::= { snVsrpVirRtrEntry 2 }
snVsrpVirRtrOwnership OBJECT-TYPE
SYNTAX INTEGER {
incomplete(0),
owner(1),
backup(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ownership of this vsrp router interface
can be set to backup(2).
VirRtr SNMP-GET returns incomplete(0), it means
no IP address has assigned to this vsrp router interface."
::= { snVsrpVirRtrEntry 3 }
snVsrpVirRtrCfgPriority OBJECT-TYPE
SYNTAX INTEGER (1..254)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The higher the number the higher the priority is.
This parameter decides which backup router should becomes
the Active Router for the interface. A backup Router with
higher priority selected to becomes the Active Router.
Therefore, this Object can be set if only if snVsrpVirRtrOwnership
is set to backup(2)."
DEFVAL { 100 }
::= { snVsrpVirRtrEntry 4 }
snVsrpVirRtrTrackPriority OBJECT-TYPE
SYNTAX INTEGER (1..254)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The higher the number the higher the priority is.
after this object is configured, the snVsrpVirRtrCurrPriority
of this interface will be adjusted dynamically with this
track priority when the Track Port states first
changes from UP to DOWN."
::= { snVsrpVirRtrEntry 5 }
snVsrpVirRtrCurrPriority OBJECT-TYPE
SYNTAX INTEGER (1..254)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The higher the number the higher the priority is.
This object will be adjusted dynamically with the
track priority when the Track Port states first
changes from UP to DOWN."
::= { snVsrpVirRtrEntry 6 }
snVsrpVirRtrHelloInt OBJECT-TYPE
SYNTAX INTEGER (1..84)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Time interval between advertisements (seconds)."
DEFVAL { 1 }
::= { snVsrpVirRtrEntry 7 }
snVsrpVirRtrDeadInt OBJECT-TYPE
SYNTAX INTEGER (0..84)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Dead interval (seconds)."
DEFVAL { 1 }
::= { snVsrpVirRtrEntry 8 }
snVsrpVirRtrPreemptMode OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This mode controls whether a higher priority Backup router
preempts a lower priority Master. The mode with enabled(1)
allow preemption and disabled(0) prohibit preemption."
DEFVAL { enabled }
::= { snVsrpVirRtrEntry 9 }
snVsrpVirRtrState OBJECT-TYPE
SYNTAX INTEGER {
init(0),
master(1),
backup(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object specifies the vsrp Router's interface state as:
init(0)...initialization state.
master(1)...master state.
backup(2)...backup state."
::= { snVsrpVirRtrEntry 10 }
snVsrpVirRtrIpAddrMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The numbers of IP Addresses of this virtual router of this
interface, this holds good for L3 vsrp."
::= { snVsrpVirRtrEntry 11 }
snVsrpVirRtrActivate OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specifies the vsrp Router's activate command as:
disabled(0)...deactivate this vsrp Router.
enabled(1)....activate this vsrp Router."
::= { snVsrpVirRtrEntry 12 }
snVsrpVirRtrTrackPortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specifies the identity of the physical port and virtual ports
whose state is to be monitored. Each port index is
an ifIndex, if there are consecutive 4 or more ifIndex then
they will be encoded like below.
Encoding and decoding scheme is range based:
Each range prefix with 0000 (2 octets) where 0000 is not valid
ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2
octets of higher range ifIndex. Individual(non range) ones will be displayed as it is.
Ex:
port list: 0001..0005 0015 0032..0047
Port list in PDU: 0000 0001 0005 000f 0000 0020 002f.
If this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The router VSRP physical track port membership."
::= { snVsrpVirRtrEntry 13 }
snVsrpVirRtrAdvertiseBackup OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set Advertise this backup router to master "
DEFVAL { disabled }
::= { snVsrpVirRtrEntry 14 }
snVsrpVirRtrHoldDownInt OBJECT-TYPE
SYNTAX INTEGER (1..84)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VSRP protection mechanism, an extra delay for a switch in
backup mode to upgrade itself to master mode"
DEFVAL { 2 }
::= { snVsrpVirRtrEntry 15 }
snVsrpVirRtrInitTtl OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VSRP:TTL in the hello packet to regulate the distance that a hello packet
can travel. It prevents the flooding of VSRP hello packets in the network"
DEFVAL { 2 }
::= { snVsrpVirRtrEntry 16 }
snVsrpVirRtrIncPortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Include all free ports of the VLAN into its control ports"
::= { snVsrpVirRtrEntry 17 }
snVsrpVirRtrSave OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set VSRP to save current parameters value"
DEFVAL { disabled }
::= { snVsrpVirRtrEntry 18 }
snVsrpVirRtrBackupInt OBJECT-TYPE
SYNTAX INTEGER (60..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Time interval between backup routers hello message advertisements (seconds)."
DEFVAL { 60 }
::= { snVsrpVirRtrEntry 19 }
snVsrpVirRtrRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an existing row
VirRtr the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snVsrpVirRtrEntry 20}
snVsrpVirRtrRxArpPktDropCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The received vsrp ARP Packet Drop Counts."
::= { snVsrpVirRtrEntry 21 }
snVsrpVirRtrRxIpPktDropCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The received VSRP IP Packet Drop Counts."
::= { snVsrpVirRtrEntry 22 }
snVsrpVirRtrRxPortMismatchCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The received vsrp Port mismatching Counts."
::= { snVsrpVirRtrEntry 23 }
snVsrpVirRtrRxNumOfIpMismatchCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The received VSRP Number of IP Addresses mismatching Counts."
::= { snVsrpVirRtrEntry 24 }
snVsrpVirRtrRxIpMismatchCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The received vsrp IP Address mismatching Counts."
::= { snVsrpVirRtrEntry 25 }
snVsrpVirRtrRxHelloIntMismatchCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counts of the virtual router interface with hello interval mismatch counts."
::= { snVsrpVirRtrEntry 26 }
snVsrpVirRtrRxPriorityZeroFromMasterCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counts of the virtual router interface with Priority zero from the master."
::= { snVsrpVirRtrEntry 27 }
snVsrpVirRtrRxHigherPriorityCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counts of the virtual router interface with higher Priority."
::= { snVsrpVirRtrEntry 28 }
snVsrpVirRtrTransToMasterStateCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counts of the virtual router interface transition to master state."
::= { snVsrpVirRtrEntry 29 }
snVsrpVirRtrTransToBackupStateCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counts of the virtual router interface transition to backup state."
::= { snVsrpVirRtrEntry 30 }
snVsrpVirRtrCurrDeadInt OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current Dead interval (in 100 milliseconds)."
::= { snVsrpVirRtrEntry 31 }
snVsrpVirRtrCurHelloInt OBJECT-TYPE
SYNTAX INTEGER (1..84)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Set backup router hello interval"
::= { snVsrpVirRtrEntry 32 }
snVsrpVirRtrCurHoldDownInt OBJECT-TYPE
SYNTAX INTEGER (1..84)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"VSRP protection mechanism, an extra delay for a switch in
backup mode to upgrade itself to master mode"
::= { snVsrpVirRtrEntry 33 }
snVsrpVirRtrCurInitTtl OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"VSRP:TTL in the hello packet to regulate the distance that a hello packet
can travel. It prevents the flooding of VSRP hello packets in the network"
::= { snVsrpVirRtrEntry 34 }
snVsrpVirRtrHelloMacAddress OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Hello MAC address."
::= { snVsrpVirRtrEntry 35 }
snVsrpVirRtrMasterIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The master router's real/virtual (primary) IP address. This is
the IP address listed as the source in vsrp advertisement
last received by this virtual router."
::= { snVsrpVirRtrEntry 36 }
END
HP-SN-IPX-MIB DEFINITIONS ::= BEGIN
-- Foundry SnIpx Group MIB Release 1.0.0
-- Revision 0 1/7/97
-- Copyright 1996-97 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry Networks SNMP Management Information Base
-- Specification embodies Foundry Networks' confidential and
-- proprietary intellectual property. Foundry Networks retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS," and Foundry Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
-- SECTION 1: Top Level Definitions
-- Imports
IMPORTS
Counter
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
snIpx
FROM HP-SN-ROOT-MIB;
-- textual conventions
-- RtrStatus Values
RtrStatus ::= INTEGER { disabled(0), enabled(1) }
-- Clear Status Values
ClearStatus ::= INTEGER { normal(0), clear(1) }
-- Port index
PortIndex ::= INTEGER (1..3900)
-- Action
Action ::= INTEGER { deny(0), permit(1) }
PhysAddress ::= OCTET STRING
-- This data type is used to model media addresses. For many
-- types of media, this will be in a binary representation.
-- For example, an ethernet address would be represented as
-- a string of 6 octets.
NetNumber ::= OCTET STRING (SIZE(4))
-- SECTION 2: MIB
-- Router IPX MIB
snIpxGen OBJECT IDENTIFIER ::= { snIpx 1 }
snIpxCache OBJECT IDENTIFIER ::= { snIpx 2 }
snIpxRoute OBJECT IDENTIFIER ::= { snIpx 3 }
snIpxServer OBJECT IDENTIFIER ::= { snIpx 4 }
snIpxFwdFilter OBJECT IDENTIFIER ::= { snIpx 5 }
snIpxRipFilter OBJECT IDENTIFIER ::= { snIpx 6 }
snIpxSapFilter OBJECT IDENTIFIER ::= { snIpx 7 }
snIpxIfFwdAccess OBJECT IDENTIFIER ::= { snIpx 8 }
snIpxIfRipAccess OBJECT IDENTIFIER ::= { snIpx 9 }
snIpxIfSapAccess OBJECT IDENTIFIER ::= { snIpx 10 }
snIpxPortAddr OBJECT IDENTIFIER ::= { snIpx 11 }
snIpxPortCounters OBJECT IDENTIFIER ::= { snIpx 12 }
-- IPX General MIBs
snIpxRoutingMode OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabled/Disabled System IPX Routing Mode status."
::= { snIpxGen 1 }
snIpxNetBiosFilterMode OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabled/Disabled NetBios Filter Mode status."
::= { snIpxGen 2 }
snIpxClearCache OBJECT-TYPE
SYNTAX ClearStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear(1) will clear cache table."
::= { snIpxGen 3 }
snIpxClearRoute OBJECT-TYPE
SYNTAX ClearStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear(1) will clear ipx route table."
::= { snIpxGen 4 }
snIpxClearTrafficCnts OBJECT-TYPE
SYNTAX ClearStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear(1) will clear ipx all traffic counters.
- snIpxRcvPktsCnt, snIpxFwdPktsCnt,
snIpxRcvDropPktsCnt, snIpxTxDropPktsCnt,
snIpxRcvFiltPktsCnt, snIpxTxFiltPktsCnt."
::= { snIpxGen 5 }
snIpxRcvPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX incoming packets counter."
::= { snIpxGen 6 }
snIpxTxPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX Outgoing packets counter."
::= { snIpxGen 7 }
snIpxFwdPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX forwarding packets counter."
::= { snIpxGen 8 }
snIpxRcvDropPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX receiving drop packets counter."
::= { snIpxGen 9 }
snIpxRcvFiltPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX receiving filter packets counter."
::= { snIpxGen 10 }
snIpxRipGblFiltList OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An IPX RIP Global Filter List."
::= { snIpxGen 11 }
snIpxRipFiltOnAllPort OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
deleteAllInBound(2),
deleteAllOutBound(3),
addAllInBound(4),
addAllOutBound(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Apply the IPX RIP Global filter list snIpxRipGblFiltList to
all interfaces. This object is used to add all RIP filter
lists and delete all RIP filter lists to/from all ports.
Prior to sending this command, snIpxRipGblFiltList must be ready.
The values that can be written are:
deleteAllInBound(2)...delete all in-bound filter lists from all ports.
deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
addAllInBound(4)......add all in-bound filter lists to all ports.
addAllOutBound(5).....add all out-bound filter lists to all ports.
If set operation is failed, then a SET with
value of (2)or(3) returns error 'GenError'.
Deleted(2)&(3) go away immediately.
The following values can be returned on reads:
noSuch(0)...no such operation yet.
valid(1)....set operation is done and is valid"
::= { snIpxGen 12 }
snIpxSapGblFiltList OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An IPX SAP Global Filter List."
::= { snIpxGen 13 }
snIpxSapFiltOnAllPort OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
deleteAllInBound(2),
deleteAllOutBound(3),
addAllInBound(4),
addAllOutBound(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Apply the IPX SAP Global filter list snIpxSapGblFiltList to
all interfaces. This object is used to add all RIP filter
lists and delete all SAP filter lists to/from all ports.
Prior to sending this command, snIpxSapGblFiltList must be ready.
The values that can be written are:
deleteAllInBound(2)...delete all in-bound filter lists from all ports.
deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
addAllInBound(4)......add all in-bound filter lists to all ports.
addAllOutBound(5).....add all out-bound filter lists to all ports.
If set operation is failed, then a SET with
value of (2)or(3) returns error 'GenError'.
Deleted(2)&(3) go away immediately.
The following values can be returned on reads:
noSuch(0)...no such operation yet.
valid(1)....set operation is done and is valid"
::= { snIpxGen 14 }
snIpxTxDropPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX transmitting drop packets counter."
::= { snIpxGen 15 }
snIpxTxFiltPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX transmitting filter packets counter."
::= { snIpxGen 16 }
-- IPX Cache table
snIpxCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxCacheEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX Cache table."
::= { snIpxCache 1 }
snIpxCacheEntry OBJECT-TYPE
SYNTAX SnIpxCacheEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX Cache table."
INDEX { snIpxCacheIndex }
::= { snIpxCacheTable 1 }
SnIpxCacheEntry ::= SEQUENCE {
snIpxCacheIndex
INTEGER,
snIpxCacheNetNum
NetNumber,
snIpxCacheNode
PhysAddress,
snIpxCacheOutFilter
RtrStatus,
snIpxCacheEncap
INTEGER,
snIpxCachePort
PortIndex
}
snIpxCacheIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a IPX Cache entry."
::= { snIpxCacheEntry 1 }
snIpxCacheNetNum OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Network number."
::= { snIpxCacheEntry 2 }
snIpxCacheNode OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Node Number."
::= { snIpxCacheEntry 3 }
snIpxCacheOutFilter OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Outbound Filter is ether disabled(0) or enabled(1)."
::= { snIpxCacheEntry 4 }
snIpxCacheEncap OBJECT-TYPE
SYNTAX INTEGER {
ethernetII(1),
ethernet8022(2),
ethernet8023(3),
ethernetSnap(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPX encapsulation frame type."
::= { snIpxCacheEntry 5 }
snIpxCachePort OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX Router Port number."
::= { snIpxCacheEntry 6 }
-- IPX route table
snIpxRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX route table."
::= { snIpxRoute 1 }
snIpxRouteEntry OBJECT-TYPE
SYNTAX SnIpxRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX route table."
INDEX { snIpxRouteIndex }
::= { snIpxRouteTable 1 }
SnIpxRouteEntry ::= SEQUENCE {
snIpxRouteIndex
INTEGER,
snIpxDestNetNum
NetNumber,
snIpxFwdRouterNode
PhysAddress,
snIpxDestHopCnts
INTEGER,
snIpxRouteMetric
INTEGER,
snIpxDestPort
INTEGER
}
snIpxRouteIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a IPX route entry."
::= { snIpxRouteEntry 1 }
snIpxDestNetNum OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Destination Network number."
::= { snIpxRouteEntry 2 }
snIpxFwdRouterNode OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Forward Router Node Number."
::= { snIpxRouteEntry 3 }
snIpxDestHopCnts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of hops to reach the
destination."
::= { snIpxRouteEntry 4 }
snIpxRouteMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The metrics to next hop router."
::= { snIpxRouteEntry 5 }
snIpxDestPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination port."
::= { snIpxRouteEntry 6 }
-- IPX Server table
snIpxServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX Server table."
::= { snIpxServer 1 }
snIpxServerEntry OBJECT-TYPE
SYNTAX SnIpxServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX Server table."
INDEX { snIpxServerIndex }
::= { snIpxServerTable 1 }
SnIpxServerEntry ::= SEQUENCE {
snIpxServerIndex
INTEGER,
snIpxServerType
INTEGER,
snIpxServerNetNum
NetNumber,
snIpxServerNode
PhysAddress,
snIpxServerSocket
INTEGER,
snIpxServerHopCnts
INTEGER,
snIpxServerName
OCTET STRING
}
snIpxServerIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a IPX Server entry."
::= { snIpxServerEntry 1 }
snIpxServerType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX Server Type."
::= { snIpxServerEntry 2 }
snIpxServerNetNum OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Server Network number."
::= { snIpxServerEntry 3 }
snIpxServerNode OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Server Node Number."
::= { snIpxServerEntry 4 }
snIpxServerSocket OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Server Socket Number."
::= { snIpxServerEntry 5 }
snIpxServerHopCnts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of intervening networks to reach the
server."
::= { snIpxServerEntry 6 }
snIpxServerName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..47))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX Server Name."
::= { snIpxServerEntry 7 }
-- IPX Forward Filter table
snIpxFwdFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxFwdFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX Forward Filter table."
::= { snIpxFwdFilter 1 }
snIpxFwdFilterEntry OBJECT-TYPE
SYNTAX SnIpxFwdFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX Forward Filter table."
INDEX { snIpxFwdFilterIdx }
::= { snIpxFwdFilterTable 1 }
SnIpxFwdFilterEntry ::= SEQUENCE {
snIpxFwdFilterIdx
INTEGER,
snIpxFwdFilterAction
Action,
snIpxFwdFilterSocket
INTEGER,
snIpxFwdFilterSrcNet
NetNumber,
snIpxFwdFilterSrcNode
PhysAddress,
snIpxFwdFilterDestNet
NetNumber,
snIpxFwdFilterDestNode
PhysAddress,
snIpxFwdFilterRowStatus
INTEGER
}
snIpxFwdFilterIdx OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The filter ID for a filter entry."
::= { snIpxFwdFilterEntry 1 }
snIpxFwdFilterAction OBJECT-TYPE
SYNTAX Action
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the ipx packet match
with this filter."
::= { snIpxFwdFilterEntry 2 }
snIpxFwdFilterSocket OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IPX Forward Filter Socket Number."
::= { snIpxFwdFilterEntry 3 }
snIpxFwdFilterSrcNet OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source Network Number."
::= { snIpxFwdFilterEntry 4 }
snIpxFwdFilterSrcNode OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source Node Number."
::= { snIpxFwdFilterEntry 5 }
snIpxFwdFilterDestNet OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination Network Number."
::= { snIpxFwdFilterEntry 6 }
snIpxFwdFilterDestNode OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination Node Number."
::= { snIpxFwdFilterEntry 7 }
snIpxFwdFilterRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpxFwdFilterEntry 8 }
-- IPX RIP Filter table
snIpxRipFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxRipFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX RIP Filter table."
::= { snIpxRipFilter 1 }
snIpxRipFilterEntry OBJECT-TYPE
SYNTAX SnIpxRipFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX RIP Filter table."
INDEX { snIpxRipFilterId }
::= { snIpxRipFilterTable 1 }
SnIpxRipFilterEntry ::= SEQUENCE {
snIpxRipFilterId
INTEGER,
snIpxRipFilterAction
Action,
snIpxRipFilterNet
NetNumber,
snIpxRipFilterMask
NetNumber,
snIpxRipFilterRowStatus
INTEGER
}
snIpxRipFilterId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The filter ID for a filter entry."
::= { snIpxRipFilterEntry 1 }
snIpxRipFilterAction OBJECT-TYPE
SYNTAX Action
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the ipx packet match
with this filter."
::= { snIpxRipFilterEntry 2 }
snIpxRipFilterNet OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IPX RIP Filter Network number."
::= { snIpxRipFilterEntry 3 }
snIpxRipFilterMask OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IPX RIP Filter Network/Subnet Mask."
::= { snIpxRipFilterEntry 4 }
snIpxRipFilterRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpxRipFilterEntry 5 }
-- IPX SAP Filter table
snIpxSapFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxSapFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX SAP Filter table."
::= { snIpxSapFilter 1 }
snIpxSapFilterEntry OBJECT-TYPE
SYNTAX SnIpxSapFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX SAP Filter table."
INDEX { snIpxSapFilterId }
::= { snIpxSapFilterTable 1 }
SnIpxSapFilterEntry ::= SEQUENCE {
snIpxSapFilterId
INTEGER,
snIpxSapFilterAction
Action,
snIpxSapFilterType
INTEGER,
snIpxSapFilterName
OCTET STRING,
snIpxSapFilterRowStatus
INTEGER
}
snIpxSapFilterId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The filter ID for a filter entry."
::= { snIpxSapFilterEntry 1 }
snIpxSapFilterAction OBJECT-TYPE
SYNTAX Action
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the ipx packet match
with this filter."
::= { snIpxSapFilterEntry 2 }
snIpxSapFilterType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IPX SAP Filter type to be matched."
::= { snIpxSapFilterEntry 3 }
snIpxSapFilterName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..47))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IPX SAP Filter Name."
::= { snIpxSapFilterEntry 4 }
snIpxSapFilterRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpxSapFilterEntry 5 }
-- IPX IF Forward Access table
snIpxIfFwdAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxIfFwdAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX IF Forward Access table."
::= { snIpxIfFwdAccess 1 }
snIpxIfFwdAccessEntry OBJECT-TYPE
SYNTAX SnIpxIfFwdAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX Forward Access table."
INDEX { snIpxIfFwdAccessPort, snIpxIfFwdAccessDir }
::= { snIpxIfFwdAccessTable 1 }
SnIpxIfFwdAccessEntry ::= SEQUENCE {
snIpxIfFwdAccessPort
INTEGER,
snIpxIfFwdAccessDir
INTEGER,
snIpxIfFwdAccessFilterList
OCTET STRING,
snIpxIfFwdAccessRowStatus
INTEGER
}
snIpxIfFwdAccessPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPX interface to which the Forward Filter applies."
::= { snIpxIfFwdAccessEntry 1 }
snIpxIfFwdAccessDir OBJECT-TYPE
SYNTAX INTEGER { in(1), out(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The access direction of incoming packet filter
or outgoing packet filter."
::= { snIpxIfFwdAccessEntry 2 }
snIpxIfFwdAccessFilterList OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An IPX IF Forward Filter List."
::= { snIpxIfFwdAccessEntry 3 }
snIpxIfFwdAccessRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpxIfFwdAccessEntry 4 }
-- IPX IF RIP Access table
snIpxIfRipAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxIfRipAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX IF RIP Access table."
::= { snIpxIfRipAccess 1 }
snIpxIfRipAccessEntry OBJECT-TYPE
SYNTAX SnIpxIfRipAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX Forward Access table."
INDEX { snIpxIfRipAccessPort, snIpxIfRipAccessDir }
::= { snIpxIfRipAccessTable 1 }
SnIpxIfRipAccessEntry ::= SEQUENCE {
snIpxIfRipAccessPort
INTEGER,
snIpxIfRipAccessDir
INTEGER,
snIpxIfRipAccessFilterList
OCTET STRING,
snIpxIfRipAccessRowStatus
INTEGER
}
snIpxIfRipAccessPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPX interface to which the RIP Filter applies."
::= { snIpxIfRipAccessEntry 1 }
snIpxIfRipAccessDir OBJECT-TYPE
SYNTAX INTEGER { in(1), out(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The access direction of incoming packet filter
or outgoing packet filter."
::= { snIpxIfRipAccessEntry 2 }
snIpxIfRipAccessFilterList OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An IPX IF RIP Access Filter List."
::= { snIpxIfRipAccessEntry 3 }
snIpxIfRipAccessRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpxIfRipAccessEntry 4 }
-- IPX IF SAP Access table
snIpxIfSapAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxIfSapAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX IF RIP Access table."
::= { snIpxIfSapAccess 1 }
snIpxIfSapAccessEntry OBJECT-TYPE
SYNTAX SnIpxIfSapAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX Forward Access table."
INDEX { snIpxIfSapAccessPort, snIpxIfSapAccessDir }
::= { snIpxIfSapAccessTable 1 }
SnIpxIfSapAccessEntry ::= SEQUENCE {
snIpxIfSapAccessPort
INTEGER,
snIpxIfSapAccessDir
INTEGER,
snIpxIfSapAccessFilterList
OCTET STRING,
snIpxIfSapAccessRowStatus
INTEGER
}
snIpxIfSapAccessPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPX interface to which the SAP Filter applies."
::= { snIpxIfSapAccessEntry 1 }
snIpxIfSapAccessDir OBJECT-TYPE
SYNTAX INTEGER { in(1), out(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The access direction of incoming packet filter
or outgoing packet filter."
::= { snIpxIfSapAccessEntry 2 }
snIpxIfSapAccessFilterList OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An IPX IF SAP Access Filter List."
::= { snIpxIfSapAccessEntry 3 }
snIpxIfSapAccessRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpxIfSapAccessEntry 4 }
-- ipx interface address table
snIpxPortAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxPortAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX port address table."
::= { snIpxPortAddr 1 }
snIpxPortAddrEntry OBJECT-TYPE
SYNTAX SnIpxPortAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX Port Address table."
INDEX { snIpxPortAddrPort, snIpxPortAddrEncap }
::= { snIpxPortAddrTable 1 }
SnIpxPortAddrEntry ::= SEQUENCE {
snIpxPortAddrPort
PortIndex,
snIpxPortAddrEncap
INTEGER,
snIpxPortAddrNetNum
NetNumber,
snIpxPortAddrRowStatus
INTEGER,
snIpxPortAddrNetBiosFilterMode
RtrStatus
}
snIpxPortAddrPort OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port index for port address entry."
::= { snIpxPortAddrEntry 1 }
snIpxPortAddrEncap OBJECT-TYPE
SYNTAX INTEGER {
ethernet8022(1),
ethernet8023(2),
ethernetII(3),
ethernetSnap(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IPX encapsulation type.
ethernet8022(1), ethernet8023(2),
ethernetII(3), ethernetSnap(4)
Note: Each Network Number can be assigned with one unique Frame type; Otherwise,
a SNMP-SET error will be returned."
::= { snIpxPortAddrEntry 2 }
snIpxPortAddrNetNum OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An unique Network number for the IPX interface port."
::= { snIpxPortAddrEntry 3 }
snIpxPortAddrRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpxPortAddrEntry 4 }
snIpxPortAddrNetBiosFilterMode OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enabled/Disabled NetBios Filter Mode status per Port Address entry."
::= { snIpxPortAddrEntry 5 }
-- ipx port counters table
snIpxPortCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpxPortCountersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPX port Counters table."
::= { snIpxPortCounters 1 }
snIpxPortCountersEntry OBJECT-TYPE
SYNTAX SnIpxPortCountersEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IPX Port Counters table."
INDEX { snIpxPortCountersPort }
::= { snIpxPortCountersTable 1 }
SnIpxPortCountersEntry ::= SEQUENCE {
snIpxPortCountersPort
PortIndex,
snIpxPortCountersRcvPktsCnt
Counter,
snIpxPortCountersTxPktsCnt
Counter,
snIpxPortCountersFwdPktsCnt
Counter,
snIpxPortCountersRcvDropPktsCnt
Counter,
snIpxPortCountersTxDropPktsCnt
Counter,
snIpxPortCountersRcvFiltPktsCnt
Counter,
snIpxPortCountersTxFiltPktsCnt
Counter
}
snIpxPortCountersPort OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port index for port Counters entry."
::= { snIpxPortCountersEntry 1 }
snIpxPortCountersRcvPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX incoming packets counter for the interface."
::= { snIpxPortCountersEntry 2 }
snIpxPortCountersTxPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX Outgoing packets counter for the interface."
::= { snIpxPortCountersEntry 3 }
snIpxPortCountersFwdPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX forwarding packets counter for the interface."
::= { snIpxPortCountersEntry 4 }
snIpxPortCountersRcvDropPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX receiving drop packets counter for the interface."
::= { snIpxPortCountersEntry 5 }
snIpxPortCountersTxDropPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX transmitting drop packets counter for the interface."
::= { snIpxPortCountersEntry 6 }
snIpxPortCountersRcvFiltPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX receiving filter packets counter for the interface."
::= { snIpxPortCountersEntry 7 }
snIpxPortCountersTxFiltPktsCnt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX transmitting filter packets counter for the interface."
::= { snIpxPortCountersEntry 8 }
END
HP-SN-OSPF-GROUP-MIB DEFINITIONS ::= BEGIN
-- Foundry snOspf Group MIB Release 1.0.0
-- Revision 1 10/08/99
-- Copyright 1996-99 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry Networks SNMP Management Information Base Specification
-- (Specification) embodies Foundry Networks' confidential and
-- proprietary intellectual property. Foundry Networks retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS," and Foundry Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
-- SECTION 1: Top Level Definitions
IMPORTS
Counter, Gauge, IpAddress
FROM RFC1155-SMI
-- mib-2
-- FROM RFC1213-MIB
OBJECT-TYPE
FROM RFC-1212
snOspf
FROM HP-SN-ROOT-MIB;
-- The Area ID, in OSPF, has the same format as an IP Address,
-- but has the function of defining a summarization point for
-- Link State Advertisements
AreaID ::= IpAddress
-- The Router ID, in OSPF, has the same format as an IP Address,
-- but identifies the router independent of its IP Address.
RouterID ::= IpAddress
-- The OSPF Metric is defined as an unsigned value in the range
Metric ::= INTEGER (0..65535)
-- 0..'FFFF'h
BigMetric ::= INTEGER (0..16777215)
-- 0..'FFFFFF'h
-- Boolean Values
TruthVal ::= INTEGER { false (0), true (1) }
-- RtrStatus Values
RtrStatus ::= INTEGER { disabled (0), enabled (1) }
-- Time Durations measured in seconds
PositiveInteger ::= INTEGER (0..2147483647)
-- 0..'7FFFFFFF'h
HelloRange ::= INTEGER (1..65535)
-- 1..'FFFF'h
UpToMaxAge ::= INTEGER (0..3600)
-- The range of ifIndex, i.e. (1..ifNumber)
-- Potential Priorities for the Designated Router Election
DesignatedRouterPriority ::= INTEGER (0..255)
-- Type of Service is defined as a mapping to the IP Type of
-- Service Flags as defined in the Router Requirements
-- Document:
--
-- Type of Service is defined as a mapping to the IP Type of
-- Service Flags as defined in the IP Forwarding Table MIB
-- +-----+-----+-----+-----+-----+-----+-----+-----+
-- | | | |
-- | PRECEDENCE | TYPE OF SERVICE | 0 |
-- | | | |
-- +-----+-----+-----+-----+-----+-----+-----+-----+
-- IP TOS IP TOS
-- Field Policy Field Policy
-- Contents Code Contents Code
-- 0 0 0 0 ==> 0 0 0 0 1 ==> 2
-- 0 0 1 0 ==> 4 0 0 1 1 ==> 6
-- 0 1 0 0 ==> 8 0 1 0 1 ==> 10
-- 0 1 1 0 ==> 12 0 1 1 1 ==> 14
-- 1 0 0 0 ==> 16 1 0 0 1 ==> 18
-- 1 0 1 0 ==> 20 1 0 1 1 ==> 22
-- 1 1 0 0 ==> 24 1 1 0 1 ==> 26
-- 1 1 1 0 ==> 28 1 1 1 1 ==> 30
-- The remaining values are left for future definition.
TOSType ::= INTEGER (0..30)
-- Groups
snOspfGen OBJECT IDENTIFIER ::= { snOspf 1 }
snOspfArea OBJECT IDENTIFIER ::= { snOspf 2 }
snOspfAddrRange OBJECT IDENTIFIER ::= { snOspf 3 }
snOspfIntf OBJECT IDENTIFIER ::= { snOspf 4 }
snOspfVirtIf OBJECT IDENTIFIER ::= { snOspf 5 }
snOspfRedis OBJECT IDENTIFIER ::= { snOspf 6 }
snOspfNbr OBJECT IDENTIFIER ::= { snOspf 7 }
snOspfVirtNbr OBJECT IDENTIFIER ::= { snOspf 8 }
snOspfLsdb OBJECT IDENTIFIER ::= { snOspf 9 }
snOspfExtLsdb OBJECT IDENTIFIER ::= { snOspf 10 }
snOspfAreaStatus OBJECT IDENTIFIER ::= { snOspf 11 }
snOspfIfStatus OBJECT IDENTIFIER ::= { snOspf 12 }
snOspfVirtIfStatus OBJECT IDENTIFIER ::= { snOspf 13 }
snOspfRoutingInfo OBJECT IDENTIFIER ::= { snOspf 14 }
snOspfTrapControl OBJECT IDENTIFIER ::= { snOspf 15 }
-- Section 1: OSPF General Variables
-- These parameters apply globally to the Router's
-- OSPF Process.
snOspfRouterId OBJECT-TYPE
SYNTAX RouterID
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A 32-bit integer uniquely identifying the router in
the Autonomous System.
By convention, to ensure uniqueness, this should
default to the value of one of the router's IP
interface addresses."
REFERENCE
"OSPF Version 2, C.1 Global parameters"
::= { snOspfGen 1 }
snOspfAdminStat OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The administrative status of OSPF in the router. The
value 'enabled' denotes that the OSPF Process is active
on at least one interface; 'disabled' disables it on
all interfaces."
::= { snOspfGen 2 }
snOspfASBdrRtrStatus OBJECT-TYPE
SYNTAX TruthVal
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A flag to note whether this router is an Autonomous
System border router."
REFERENCE
"OSPF Version 2, Section 3.3 Classification of routers"
::= { snOspfGen 3 }
snOspfRedisMode OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Redistribution status of OSPF in the router. The
value 'enabled' denotes that the OSPF Redistribution is
active; 'disabled' disables it on the router."
::= { snOspfGen 4 }
snOspfDefaultOspfMetricValue OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The metric of using a default OSPF Metric value on this route."
::= { snOspfGen 5 }
snOspfExternLSACount OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of external (LS type 5) link-state
advertisements in the link-state database."
REFERENCE
"OSPF Version 2, Appendix A.4.5 AS external link
advertisements"
::= { snOspfGen 6 }
snOspfExternLSACksumSum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32-bit unsigned sum of the LS checksums of the
external link-state advertisements contained in the
link-state database. This sum can be used to determine
if there has been a change in a router's link state
database, and to compare the link-state database of two
routers."
::= { snOspfGen 7 }
snOspfOriginateNewLSAs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of new link-state advertisements that have
been originated. This number is incremented each time
the router originates a new LSA."
::= { snOspfGen 8 }
snOspfRxNewLSAs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of link-state advertisements received
determined to be new instantiations. This number does
not include newer instantiations of self-originated
link-state advertisements."
::= { snOspfGen 9 }
snOspfOspfRedisMetricType OBJECT-TYPE
SYNTAX INTEGER {
type1(1),
type2(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"type1: For External Type 1 (comparable value) the
intra-area and inter-area routes,
it is an OSPF metric plus the External Metric.
type2: For external Type 2 (non-comparable value) routes,
it is the external metric."
::= { snOspfGen 10 }
snOspfExtLsdbLimit OBJECT-TYPE
SYNTAX INTEGER (1..2000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum number of non-default AS-
external-LSAs entries that can be stored in the
link-state database. If the value is -1, then
there is no limit.
When the number of non-default AS-external-LSAs
in a router's link-state database reaches
ospfExtLsdbLimit, the router enters Overflow-
State. The router never holds more than
ospfExtLsdbLimit non-default AS-external-LSAs
in its database. OspfExtLsdbLimit MUST be set
identically in all routers attached to the OSPF
backbone and/or any regular OSPF area. (i.e.,
OSPF stub areas and NSSAs are excluded)."
::= { snOspfGen 11 }
snOspfExitOverflowInterval OBJECT-TYPE
SYNTAX INTEGER (0..86400)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of seconds that, after entering
OverflowState, a router will attempt to leave
OverflowState. This allows the router to again
originate non-default AS-external-LSAs. When
set to 0, the router will not leave Overflow-
State until restarted."
::= { snOspfGen 12 }
snOspfRfc1583Compatibility OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This allows the ospf routing either compatible with
RFC1583 or RFC2178.
enabled(1)........activate RFC1583 compatibility rather than RFC2178
disabled(0).......disable RFC1583 compatibility and compatible to RFC2178."
::= { snOspfGen 13 }
snOspfRouterIdFormat OBJECT-TYPE
SYNTAX INTEGER {
integer(0),
ipAddress(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to specify whether
RouterId is represented as IP Address or
an Integer. The values
that can be written are:
integer(0).....as an integer.
ipAddress(1)...as IP Address."
::= { snOspfGen 14 }
snOspfDistance OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS obsolete
DESCRIPTION
"OSPF Adminitrative distance."
::= { snOspfGen 15 }
snOspfDistanceIntra OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"OSPF Adminitrative distance - Intra Area."
::= { snOspfGen 16 }
snOspfDistanceInter OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"OSPF Adminitrative distance - Inter Area."
::= { snOspfGen 17 }
snOspfDistanceExternal OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"OSPF Adminitrative distance - External."
::= { snOspfGen 18 }
-- Section 2: OSPF Area Table
-- The OSPF Area Data Structure contains information
-- regarding the various areas. The interfaces and
-- virtual links are configured as part of these areas.
-- Area 0.0.0.0, by definition, is the Backbone Area
snOspfAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnOspfAreaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information describing the configured parameters and
cumulative statistics of the router's attached areas."
REFERENCE
"OSPF Version 2, Section 6 The Area Data Structure"
::= { snOspfArea 1 }
snOspfAreaEntry OBJECT-TYPE
SYNTAX SnOspfAreaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information describing the configured parameters and
cumulative statistics of one of the router's attached
areas."
INDEX { snOspfAreaId }
::= { snOspfAreaTable 1 }
SnOspfAreaEntry ::=
SEQUENCE {
snOspfAreaId
AreaID,
snOspfImportASExtern
INTEGER,
snOspfStubMetric
BigMetric,
snOspfAreaRowStatus
INTEGER,
snOspfAreaIdFormat
INTEGER
}
snOspfAreaId OBJECT-TYPE
SYNTAX AreaID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 32-bit integer uniquely identifying an area. Area
ID 0.0.0.0 is used for the OSPF backbone."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { snOspfAreaEntry 1 }
snOspfImportASExtern OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The area's support for importing AS external link-
state advertisements.
0: Stub Area Type
1: Normal Area Type
2: NSSA Area Type"
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
DEFVAL { 1}
::= { snOspfAreaEntry 2 }
snOspfStubMetric OBJECT-TYPE
SYNTAX BigMetric
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The metric value applied at the default type of
service(ospfMetric). By default, this equals the
least metric at the type of service among the
interfaces to other areas. This Object exist if
only if the value of snOspfAreaSummary is
snOspfAreaSummary(2); Otherwise, an SNMP_GET/GET_NEXT
attempt of this Object will return NO_SUCH_NAME."
::= { snOspfAreaEntry 3 }
snOspfAreaRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snOspfAreaEntry 4 }
snOspfAreaIdFormat OBJECT-TYPE
SYNTAX INTEGER {
integer(0),
ipAddress(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to specify whether
AreaId is represented as IP Address or
an Integer. The values
that can be written are:
integer(0).....as an integer.
ipAddress(1)...as IP Address."
::= { snOspfAreaEntry 5 }
-- Section 3: Area Range Table (Address Range Table)
-- The Address Range Table acts as an adjunct to the Area
-- Table; It describes those Address Range Summaries that
-- are configured to be propagated from an Area to reduce
-- the amount of information about it which is known beyond
-- its borders.
snOspfAreaRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnOspfAreaRangeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A range if IP addresses specified by an IP address/IP
network mask pair. For example, class B address range
of X.X.X.X with a network mask of 255.255.0.0 includes
all IP addresses from X.X.0.0 to X.X.255.255"
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { snOspfAddrRange 1 }
snOspfAreaRangeEntry OBJECT-TYPE
SYNTAX SnOspfAreaRangeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A range if IP addresses specified by an IP address/IP
network mask pair. For example, class B address range
of X.X.X.X with a network mask of 255.255.0.0 includes
all IP addresses from X.X.0.0 to X.X.255.255"
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
INDEX { snOspfAreaRangeAreaID, snOspfAreaRangeNet }
::= { snOspfAreaRangeTable 1 }
SnOspfAreaRangeEntry ::=
SEQUENCE {
snOspfAreaRangeAreaID
AreaID,
snOspfAreaRangeNet
IpAddress,
snOspfAreaRangeMask
IpAddress,
snOspfAreaRangeRowStatus
INTEGER,
snOspfAreaRangeAreaIdFormat
INTEGER
}
snOspfAreaRangeAreaID OBJECT-TYPE
SYNTAX AreaID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Area the Address Range is to be found within."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { snOspfAreaRangeEntry 1 }
snOspfAreaRangeNet OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP Address of the Net or Subnet indicated by the
range."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { snOspfAreaRangeEntry 2 }
snOspfAreaRangeMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Subnet Mask that pertains to the Net or Subnet."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { snOspfAreaRangeEntry 3 }
snOspfAreaRangeRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snOspfAreaRangeEntry 4 }
snOspfAreaRangeAreaIdFormat OBJECT-TYPE
SYNTAX INTEGER {
integer(0),
ipAddress(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used to specify whether
AreaId is represented as IP Address or
an Integer. The values
that can be written are:
integer(0).....as an integer.
ipAddress(1)...as IP Address."
::= { snOspfAreaRangeEntry 5 }
-- Section 4: OSPF Interface Configuration Table
-- The OSPF Interface Table augments the ifTable with OSPF
-- specific information.
-- snOspfIfTable was replaced by snOspfIf2Table. The snOspfIfPort
-- was not an ifIndex, and the snOspfIf2Port is an ifIndex.
snOspfIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnOspfIfEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The OSPF Interface Table describes the interfaces from
the viewpoint of OSPF."
REFERENCE
"OSPF Version 2, Appendix C.3 Router interface
parameters"
::= { snOspfIntf 1 }
snOspfIfEntry OBJECT-TYPE
SYNTAX SnOspfIfEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The OSPF Interface Entry describes one interface from
the viewpoint of OSPF."
INDEX { snOspfIfPort }
::= { snOspfIfTable 1 }
SnOspfIfEntry ::=
SEQUENCE {
snOspfIfPort
INTEGER,
snOspfIfAreaId
AreaID,
snOspfIfAdminStat
RtrStatus,
snOspfIfRtrPriority
DesignatedRouterPriority,
snOspfIfTransitDelay
UpToMaxAge,
snOspfIfRetransInterval
UpToMaxAge,
snOspfIfHelloInterval
HelloRange,
snOspfIfRtrDeadInterval
PositiveInteger,
snOspfIfAuthType
INTEGER,
snOspfIfAuthKey
OCTET STRING,
snOspfIfMetricValue
INTEGER,
snOspfIfRowStatus
INTEGER,
snOspfIfMd5AuthKeyId
INTEGER,
snOspfIfMd5AuthKey
OCTET STRING,
snOspfIfMd5ActivationWaitTime
INTEGER,
snOspfIfAreaIdFormat
INTEGER,
snOspfIfPassiveMode
INTEGER,
snOspfIfDatabaseFilterAllOut
INTEGER,
snOspfIfMtuIgnore
INTEGER,
snOspfIfNetworkP2mp
INTEGER
}
snOspfIfPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The physical router port of this OSPF interface."
::= { snOspfIfEntry 1 }
snOspfIfAreaId OBJECT-TYPE
SYNTAX AreaID
ACCESS read-write
STATUS deprecated
DESCRIPTION
"A 32-bit integer uniquely identifying the area to
which the interface connects. Area ID 0.0.0.0 is used
for the OSPF backbone."
DEFVAL { '00000000'h } -- 0.0.0.0
::= { snOspfIfEntry 2 }
snOspfIfAdminStat OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The OSPF interface's administrative status. The value
'enabled' denotes that neighbor relationships may be
formed on the interface, and the interface will be
advertised as an internal route to some area. The
value 'disabled' denotes that the interface is external
to OSPF."
DEFVAL { enabled }
::= { snOspfIfEntry 3 }
snOspfIfRtrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The priority of this interface. Used in multi-access
networks, this field is used in the designated router
election algorithm. The value 0 signifies that the
router is not eligible to become the designated router
on this particular network. In the event of a tie in
this value, routers will use their router id as a tie
breaker."
DEFVAL { 1 }
::= { snOspfIfEntry 4 }
snOspfIfTransitDelay OBJECT-TYPE
SYNTAX UpToMaxAge
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The estimated number of seconds it takes to transmit a
link- state update packet over this interface."
DEFVAL { 1 }
::= { snOspfIfEntry 5 }
snOspfIfRetransInterval OBJECT-TYPE
SYNTAX UpToMaxAge
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The number of seconds between link-state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when retransmitting
database description and link-state request packets."
DEFVAL { 5 }
::= { snOspfIfEntry 6 }
snOspfIfHelloInterval OBJECT-TYPE
SYNTAX HelloRange
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The length of time, in seconds, between the Hello
packets that the router sends on the interface. This
value must be the same for all routers attached to a
common network."
DEFVAL { 10 }
::= { snOspfIfEntry 7 }
snOspfIfRtrDeadInterval OBJECT-TYPE
SYNTAX PositiveInteger
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The number of seconds that a router's Hello packets
have not been seen before it's neighbors declare the
router down. This should be some multiple of the Hello
interval. This value must be the same for all routers
attached to a common network."
DEFVAL { 40 }
::= { snOspfIfEntry 8 }
snOspfIfAuthType OBJECT-TYPE
SYNTAX INTEGER (0..255)
-- none (0),
-- simplePassword (1)
-- md5 (2)
-- reserved for specification by IANA (> 2)
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The authentication type specified for an interface.
Additional authentication types may be assigned locally
on a per interface basis."
REFERENCE
"OSPF Version 2, Appendix E Authentication"
DEFVAL { 0 } -- no authentication, by default
::= { snOspfIfEntry 9 }
snOspfIfAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The Authentication Key. If the Area's Authorization
Type is simplePassword, and the key length is shorter
than 8 octets, the agent will left adjust and zero fill
to 8 octets.
When read, snOspfIfAuthKey always returns an Octet String
of length zero."
REFERENCE
"OSPF Version 2, Section 9 The Interface Data
Structure"
DEFVAL { '0000000000000000'h } -- 0.0.0.0.0.0.0.0
::= { snOspfIfEntry 10 }
snOspfIfMetricValue OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The metric of using this type of service on
this interface. The default value of the TOS 0
Metric is 10^8 / ifSpeed."
::= { snOspfIfEntry 11 }
snOspfIfRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snOspfIfEntry 12 }
snOspfIfMd5AuthKeyId OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The md5 authentication key ID. If the snOspfVirtIfAuthType
is set to md5, the value of snOspfIfMd5AuthKeyId must be
(1 to 255). This field identifies the algorithm and secret
key used to create the message digest appended to the OSPF
packet. Key Identifiers are unique per-interface
(or equivalently, per-subnet)."
::= { snOspfIfEntry 13 }
snOspfIfMd5AuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The MD5 Authentication Key. If the Area's Authorization
Type is md5, and the key length is shorter than 16 octets,
the agent will left adjust and zero fill to 16 octets.
When read, snOspfIfMd5AuthKey always returns an Octet String
of length zero."
::= { snOspfIfEntry 14 }
snOspfIfMd5ActivationWaitTime OBJECT-TYPE
SYNTAX INTEGER (0..14400)
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The md5 authentication key activation wait time is specified in second
and the maximum wait time is 14400 seconds (4 hours)."
::= { snOspfIfEntry 15 }
snOspfIfAreaIdFormat OBJECT-TYPE
SYNTAX INTEGER {
integer(0),
ipAddress(1)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object is used to specify whether
AreaId is represented as IP Address or
an Integer. The values
that can be written are:
integer(0).....as an integer.
ipAddress(1)...as IP Address."
::= { snOspfIfEntry 16 }
snOspfIfPassiveMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object control the passive mode of this interface."
::= { snOspfIfEntry 17 }
snOspfIfDatabaseFilterAllOut OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object control the filtering of outgoing OSPF LSA on this interface."
::= { snOspfIfEntry 18 }
snOspfIfMtuIgnore OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object control MTU detection mode of this interface."
::= { snOspfIfEntry 19 }
snOspfIfNetworkP2mp OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object enable/disable P2MP mode of this interface."
::= { snOspfIfEntry 20 }
-- Section 4: OSPF Interface Configuration Table
-- The OSPF Interface Table augments the ifTable with OSPF
-- specific information.
-- snOspfIf2Table replaced snOspfIfTable. The snOspfIf2Port
-- is an ifIndex, and the snOspfIfPort is not an ifIndex.
snOspfIf2Table OBJECT-TYPE
SYNTAX SEQUENCE OF SnOspfIf2Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The OSPF Interface Table describes the interfaces from
the viewpoint of OSPF."
REFERENCE
"OSPF Version 2, Appendix C.3 Router interface
parameters"
::= { snOspfIntf 2 }
snOspfIf2Entry OBJECT-TYPE
SYNTAX SnOspfIf2Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The OSPF Interface Entry describes one interface from
the viewpoint of OSPF."
INDEX { snOspfIf2Port }
::= { snOspfIf2Table 1 }
SnOspfIf2Entry ::=
SEQUENCE {
snOspfIf2Port
INTEGER,
snOspfIf2AreaId
AreaID,
snOspfIf2AdminStat
RtrStatus,
snOspfIf2RtrPriority
DesignatedRouterPriority,
snOspfIf2TransitDelay
UpToMaxAge,
snOspfIf2RetransInterval
UpToMaxAge,
snOspfIf2HelloInterval
HelloRange,
snOspfIf2RtrDeadInterval
PositiveInteger,
snOspfIf2AuthType
INTEGER,
snOspfIf2AuthKey
OCTET STRING,
snOspfIf2MetricValue
INTEGER,
snOspfIf2RowStatus
INTEGER,
snOspfIf2Md5AuthKeyId
INTEGER,
snOspfIf2Md5AuthKey
OCTET STRING,
snOspfIf2Md5ActivationWaitTime
INTEGER,
snOspfIf2AreaIdFormat
INTEGER,
snOspfIf2PassiveMode
INTEGER,
snOspfIf2DatabaseFilterAllOut
INTEGER,
snOspfIf2MtuIgnore
INTEGER,
snOspfIf2NetworkP2mp
INTEGER
}
snOspfIf2Port OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The physical router port of this OSPF interface."
::= { snOspfIf2Entry 1 }
snOspfIf2AreaId OBJECT-TYPE
SYNTAX AreaID
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A 32-bit integer uniquely identifying the area to
which the interface connects. Area ID 0.0.0.0 is used
for the OSPF backbone."
DEFVAL { '00000000'h } -- 0.0.0.0
::= { snOspfIf2Entry 2 }
snOspfIf2AdminStat OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The OSPF interface's administrative status. The value
'enabled' denotes that neighbor relationships may be
formed on the interface, and the interface will be
advertised as an internal route to some area. The
value 'disabled' denotes that the interface is external
to OSPF."
DEFVAL { enabled }
::= { snOspfIf2Entry 3 }
snOspfIf2RtrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The priority of this interface. Used in multi-access
networks, this field is used in the designated router
election algorithm. The value 0 signifies that the
router is not eligible to become the designated router
on this particular network. In the event of a tie in
this value, routers will use their router id as a tie
breaker."
DEFVAL { 1 }
::= { snOspfIf2Entry 4 }
snOspfIf2TransitDelay OBJECT-TYPE
SYNTAX UpToMaxAge
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The estimated number of seconds it takes to transmit a
link- state update packet over this interface."
DEFVAL { 1 }
::= { snOspfIf2Entry 5 }
snOspfIf2RetransInterval OBJECT-TYPE
SYNTAX UpToMaxAge
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of seconds between link-state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when retransmitting
database description and link-state request packets."
DEFVAL { 5 }
::= { snOspfIf2Entry 6 }
snOspfIf2HelloInterval OBJECT-TYPE
SYNTAX HelloRange
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The length of time, in seconds, between the Hello
packets that the router sends on the interface. This
value must be the same for all routers attached to a
common network."
DEFVAL { 10 }
::= { snOspfIf2Entry 7 }
snOspfIf2RtrDeadInterval OBJECT-TYPE
SYNTAX PositiveInteger
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of seconds that a router's Hello packets
have not been seen before it's neighbors declare the
router down. This should be some multiple of the Hello
interval. This value must be the same for all routers
attached to a common network."
DEFVAL { 40 }
::= { snOspfIf2Entry 8 }
snOspfIf2AuthType OBJECT-TYPE
SYNTAX INTEGER (0..255)
-- none (0),
-- simplePassword (1)
-- md5 (2)
-- reserved for specification by IANA (> 2)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The authentication type specified for an interface.
Additional authentication types may be assigned locally
on a per interface basis."
REFERENCE
"OSPF Version 2, Appendix E Authentication"
DEFVAL { 0 } -- no authentication, by default
::= { snOspfIf2Entry 9 }
snOspfIf2AuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Authentication Key. If the Area's Authorization
Type is simplePassword, and the key length is shorter
than 8 octets, the agent will left adjust and zero fill
to 8 octets.
When read, snOspfIf2AuthKey always returns an Octet String
of length zero."
REFERENCE
"OSPF Version 2, Section 9 The Interface Data
Structure"
DEFVAL { '0000000000000000'h } -- 0.0.0.0.0.0.0.0
::= { snOspfIf2Entry 10 }
snOspfIf2MetricValue OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The metric of using this type of service on
this interface. The default value of the TOS 0
Metric is 10^8 / ifSpeed."
::= { snOspfIf2Entry 11 }
snOspfIf2RowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snOspfIf2Entry 12 }
snOspfIf2Md5AuthKeyId OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The md5 authentication key ID. If the snOspfVirtIfAuthType
is set to md5, the value of snOspfIf2Md5AuthKeyId must be
(1 to 255). This field identifies the algorithm and secret
key used to create the message digest appended to the OSPF
packet. Key Identifiers are unique per-interface
(or equivalently, per-subnet)."
::= { snOspfIf2Entry 13 }
snOspfIf2Md5AuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The MD5 Authentication Key. If the Area's Authorization
Type is md5, and the key length is shorter than 16 octets,
the agent will left adjust and zero fill to 16 octets.
When read, snOspfIf2Md5AuthKey always returns an Octet String
of length zero."
::= { snOspfIf2Entry 14 }
snOspfIf2Md5ActivationWaitTime OBJECT-TYPE
SYNTAX INTEGER (0..14400)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The md5 authentication key activation wait time is specified in second
and the maximum wait time is 14400 seconds (4 hours)."
::= { snOspfIf2Entry 15 }
snOspfIf2AreaIdFormat OBJECT-TYPE
SYNTAX INTEGER {
integer(0),
ipAddress(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used to specify whether
AreaId is represented as IP Address or
an Integer. The values
that can be written are:
integer(0).....as an integer.
ipAddress(1)...as IP Address."
::= { snOspfIf2Entry 16 }
snOspfIf2PassiveMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object control the passive mode of this interface."
::= { snOspfIf2Entry 17 }
snOspfIf2DatabaseFilterAllOut OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object control the filtering of outgoing OSPF LSA on this interface."
::= { snOspfIf2Entry 18 }
snOspfIf2MtuIgnore OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object control MTU detection mode of this interface."
::= { snOspfIf2Entry 19 }
snOspfIf2NetworkP2mp OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object enable/disable P2MP mode of this interface."
::= { snOspfIf2Entry 20 }
-- Section 5: OSPF Virtual Interface Table
-- The Virtual Interface Table describes the virtual
-- links that the OSPF Process is configured to
-- carry on.
snOspfVirtIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnOspfVirtIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about this router's virtual interfaces."
REFERENCE
"OSPF Version 2, Appendix C.4 Virtual link parameters"
::= { snOspfVirtIf 1 }
snOspfVirtIfEntry OBJECT-TYPE
SYNTAX SnOspfVirtIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a single Virtual Interface."
INDEX { snOspfVirtIfAreaID, snOspfVirtIfNeighbor }
::= { snOspfVirtIfTable 1 }
SnOspfVirtIfEntry ::=
SEQUENCE {
snOspfVirtIfAreaID
AreaID,
snOspfVirtIfNeighbor
RouterID,
snOspfVirtIfTransitDelay
UpToMaxAge,
snOspfVirtIfRetransInterval
UpToMaxAge,
snOspfVirtIfHelloInterval
HelloRange,
snOspfVirtIfRtrDeadInterval
PositiveInteger,
snOspfVirtIfAuthType
INTEGER,
snOspfVirtIfAuthKey
OCTET STRING,
snOspfVirtIfRowStatus
INTEGER,
snOspfVirtIfMd5AuthKeyId
INTEGER,
snOspfVirtIfMd5AuthKey
OCTET STRING,
snOspfVirtIfMd5ActivationWaitTime
INTEGER,
snOspfVirtIfAreaIdFormat
INTEGER
}
snOspfVirtIfAreaID OBJECT-TYPE
SYNTAX AreaID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Transit Area that the Virtual Link traverses. By
definition, this is not 0.0.0.0"
::= { snOspfVirtIfEntry 1 }
snOspfVirtIfNeighbor OBJECT-TYPE
SYNTAX RouterID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Router ID of the Virtual Neighbor."
::= { snOspfVirtIfEntry 2 }
snOspfVirtIfTransitDelay OBJECT-TYPE
SYNTAX UpToMaxAge
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The estimated number of seconds it takes to transmit a
link- state update packet over this interface."
DEFVAL { 1 }
::= { snOspfVirtIfEntry 3 }
snOspfVirtIfRetransInterval OBJECT-TYPE
SYNTAX UpToMaxAge
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of seconds between link-state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when retransmitting
database description and link-state request packets.
This value should be well over the expected round-trip
time."
DEFVAL { 5 }
::= { snOspfVirtIfEntry 4 }
snOspfVirtIfHelloInterval OBJECT-TYPE
SYNTAX HelloRange
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The length of time, in seconds, between the Hello
packets that the router sends on the interface. This
value must be the same for the virtual neighbor."
DEFVAL { 10 }
::= { snOspfVirtIfEntry 5 }
snOspfVirtIfRtrDeadInterval OBJECT-TYPE
SYNTAX PositiveInteger
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of seconds that a router's Hello packets
have not been seen before it's neighbors declare the
router down. This should be some multiple of the Hello
interval. This value must be the same for the virtual
neighbor."
DEFVAL { 60 }
::= { snOspfVirtIfEntry 6 }
snOspfVirtIfAuthType OBJECT-TYPE
SYNTAX INTEGER (0..255)
-- none (0),
-- simplePassword (1)
-- md5 (2)
-- reserved for specification by IANA (> 2)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The authentication type specified for an interface.
Additional authentication types may be assigned locally
on a per interface basis."
REFERENCE
"OSPF Version 2, Appendix E Authentication"
DEFVAL { 0 } -- no authentication, by default
::= { snOspfVirtIfEntry 7 }
snOspfVirtIfAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If Authentication Type is simplePassword, the device
will left adjust and zero fill to 8 octets.
When read, snOspfVifAuthKey always returns a string of
length zero."
REFERENCE
"OSPF Version 2, Section 9 The Interface Data
Structure"
DEFVAL { '0000000000000000'h } -- 0.0.0.0.0.0.0.0
::= { snOspfVirtIfEntry 8 }
snOspfVirtIfRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snOspfVirtIfEntry 9 }
snOspfVirtIfMd5AuthKeyId OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The md5 authentication key ID. If the snOspfVirtIfAuthType
is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be
(1 to 255). This field identifies the algorithm and secret
key used to create the message digest appended to the OSPF
packet. Key Identifiers are unique per-interface
(or equivalently, per-subnet)."
::= { snOspfVirtIfEntry 10 }
snOspfVirtIfMd5AuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The MD5 Authentication Key. If the Area's Authorization
Type is md5, and the key length is shorter than 16 octets,
the agent will left adjust and zero fill to 16 octets.
When read, snOspfIfMd5AuthKey always returns an Octet String
of length zero."
REFERENCE
"OSPF Version 2, Section 9 The Interface Data
Structure"
DEFVAL { '0000000000000000'h } -- 0.0.0.0.0.0.0.0
::= { snOspfVirtIfEntry 11 }
snOspfVirtIfMd5ActivationWaitTime OBJECT-TYPE
SYNTAX INTEGER (0..14400)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The md5 authentication key activation wait time is specified in second
and the maximum wait time is 14400 seconds (4 hours)."
::= { snOspfVirtIfEntry 12 }
snOspfVirtIfAreaIdFormat OBJECT-TYPE
SYNTAX INTEGER {
integer(0),
ipAddress(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used to specify whether
AreaId is represented as IP Address or
an Integer. The values
that can be written are:
integer(0).....as an integer.
ipAddress(1)...as IP Address."
::= { snOspfVirtIfEntry 13 }
-- Section 6: OSPF Redistribution of Routes Table
-- The OSPF Redistribution of Routes Table contains list of routes
-- that will be used to decide whether a particular RIP or Static
-- route is to be imported into OSPF domain as external type 2
-- route when parameter Import Route into OSPF is Enabled.
snOspfRedisTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnOspfRedisEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The OSPF Redistribution Table contains a list of routes
that could be imported into the OSPF domain."
::= { snOspfRedis 1 }
snOspfRedisEntry OBJECT-TYPE
SYNTAX SnOspfRedisEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The OSPF Redistribution Entry specifies a particular RIP
or Static route to be imported into the OSPF domain."
INDEX { snOspfRedisIndex }
::= { snOspfRedisTable 1 }
SnOspfRedisEntry ::=
SEQUENCE {
snOspfRedisIndex
INTEGER,
snOspfRedisIpAddress
IpAddress,
snOspfRedisMask
IpAddress,
snOspfRedisAction
INTEGER,
snOspfRedisProtocol
INTEGER,
snOspfRedisSetOspfMetric
INTEGER,
snOspfRedisOspfMetricValue
Metric,
snOspfRedisMatchRipMetric
INTEGER,
snOspfRedisRipMetricValue
INTEGER,
snOspfRedisRowStatus
INTEGER
}
snOspfRedisIndex OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination IP address that associates with
this particular route."
::= { snOspfRedisEntry 1 }
snOspfRedisIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The destination IP address that associates with
this particular route."
::= { snOspfRedisEntry 2 }
snOspfRedisMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Subnet Mask that pertains to this route."
::= { snOspfRedisEntry 3 }
snOspfRedisAction OBJECT-TYPE
SYNTAX INTEGER {
noImport(0),
import(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The action to be taken if the route match this entry.
noImport(0): - the route is NOT imported into OSPF
Domain.
import(1): - the route is imported into OSPF
Domain as external type 2 route."
::= { snOspfRedisEntry 4 }
snOspfRedisProtocol OBJECT-TYPE
SYNTAX INTEGER {
rip(1),
all(2),
static(3),
bgp(4),
connected(5),
isis(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The imported routes into OSPF domain is set in the following:
rip(1): - the RIP route.
all(2): - all protocol route.
static(3): - the static route.
bgp(4): - the BGP route.
connected(5): - the connected route.
isis(6): - the ISIS route."
::= { snOspfRedisEntry 5 }
snOspfRedisSetOspfMetric OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value indicates to which the route metric should match:
disabled(0): - the route metric does NOT match the
OSPF metric field.
enabled(1): - the route metric matches the OSPF
metric field."
::= { snOspfRedisEntry 6 }
snOspfRedisOspfMetricValue OBJECT-TYPE
SYNTAX Metric
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The metric of using OSPF Metric value on this route."
::= { snOspfRedisEntry 7 }
snOspfRedisMatchRipMetric OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value indicates to which the route metric should match:
disabled(0): - the route metric does NOT match the
RIP metric field.
enabled(1): - the route metric matches the RIP
metric field."
::= { snOspfRedisEntry 8 }
snOspfRedisRipMetricValue OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The metric of using RIP Metric value (1 to 15 hops) on this route."
::= { snOspfRedisEntry 9 }
snOspfRedisRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snOspfRedisEntry 10 }
-- Section 7: OSPF Neighbor Table
-- The OSPF Neighbor Table describes all neighbors in
-- the locality of the subject router.
snOspfNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnOspfNbrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of non-virtual neighbor information."
REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data
Structure"
::= { snOspfNbr 1 }
snOspfNbrEntry OBJECT-TYPE
SYNTAX SnOspfNbrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The information regarding a single neighbor."
REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data
Structure"
INDEX { snOspfNbrEntryIndex }
::= { snOspfNbrTable 1 }
SnOspfNbrEntry ::=
SEQUENCE {
snOspfNbrEntryIndex
INTEGER,
snOspfNbrPort
INTEGER,
snOspfNbrIpAddr
IpAddress,
snOspfNbrIndex
INTEGER,
snOspfNbrRtrId
RouterID,
snOspfNbrOptions
INTEGER,
snOspfNbrPriority
DesignatedRouterPriority,
snOspfNbrState
INTEGER,
snOspfNbrEvents
Counter,
snOspfNbrLsRetransQLen
Gauge
}
snOspfNbrEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table entry index of this neighbor."
::= { snOspfNbrEntry 1 }
snOspfNbrPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The physical port of this neighbor."
::= { snOspfNbrEntry 2 }
snOspfNbrIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of this neighbor."
::= { snOspfNbrEntry 3 }
snOspfNbrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The neighbor index of each port and each IP address."
::= { snOspfNbrEntry 4 }
snOspfNbrRtrId OBJECT-TYPE
SYNTAX RouterID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 32-bit integer (represented as a type IpAddress)
uniquely identifying the neighboring router in the
Autonomous System."
DEFVAL { '00000000'h } -- 0.0.0.0
::= { snOspfNbrEntry 5 }
snOspfNbrOptions OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A Bit Mask corresponding to the neighbor's op-
tions field.
Bit 0, if set, indicates that the system will
operate on Type of Service metrics other than
TOS 0. If zero, the neighbor will ignore all
metrics except the TOS 0 metric.
Bit 1, if set, indicates that the associated
area accepts and operates on external informa-
tion; if zero, it is a stub area.
Bit 2, if set, indicates that the system is ca-
pable of routing IP Multicast datagrams; i.e.,
that it implements the Multicast Extensions to
OSPF.
Bit 3, if set, indicates that the associated
area is an NSSA. These areas are capable of
carrying type 7 external advertisements, which
are translated into type 5 external advertise-
ments at NSSA borders."
REFERENCE
"OSPF Version 2, Section 12.1.2 Options"
DEFVAL { 0 }
::= { snOspfNbrEntry 6 }
snOspfNbrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The priority of this neighbor in the designat-
ed router election algorithm. The value 0 sig-
nifies that the neighbor is not eligible to be-
come the designated router on this particular
network."
DEFVAL { 1 }
::= { snOspfNbrEntry 7 }
snOspfNbrState OBJECT-TYPE
SYNTAX INTEGER {
down (1),
attempt (2),
init (3),
twoWay (4),
exchangeStart (5),
exchange (6),
loading (7),
full (8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The State of the relationship with this Neigh-
bor."
REFERENCE
"OSPF Version 2, Section 10.1 Neighbor States"
DEFVAL { down }
::= { snOspfNbrEntry 8 }
snOspfNbrEvents OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times this neighbor relationship
has changed state, or an error has occurred."
::= { snOspfNbrEntry 9 }
snOspfNbrLsRetransQLen OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current length of the retransmission
queue."
::= { snOspfNbrEntry 10 }
-- Section 8: OSPF Virtual Neighbor Table
-- This table describes all virtual neighbors.
-- Since Virtual Links are configured in the
-- virtual interface table, this table is read-only.
snOspfVirtNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnOspfVirtNbrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of virtual neighbor information."
REFERENCE
"OSPF Version 2, Section 15 Virtual Links"
::= { snOspfVirtNbr 1 }
snOspfVirtNbrEntry OBJECT-TYPE
SYNTAX SnOspfVirtNbrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Virtual neighbor information."
INDEX { snOspfVirtNbrEntryIndex }
::= { snOspfVirtNbrTable 1 }
SnOspfVirtNbrEntry ::=
SEQUENCE {
snOspfVirtNbrEntryIndex
INTEGER,
snOspfVirtNbrArea
AreaID,
snOspfVirtNbrRtrId
RouterID,
snOspfVirtNbrIpAddr
IpAddress,
snOspfVirtNbrOptions
INTEGER,
snOspfVirtNbrState
INTEGER,
snOspfVirtNbrEvents
Counter,
snOspfVirtNbrLSRetransQLen
Gauge,
snOspfVirtNbrAreaIdFormat
INTEGER
}
snOspfVirtNbrEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table entry index of this virtual neighbor."
::= { snOspfVirtNbrEntry 1 }
snOspfVirtNbrArea OBJECT-TYPE
SYNTAX AreaID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Transit Area Identifier."
::= { snOspfVirtNbrEntry 2 }
snOspfVirtNbrRtrId OBJECT-TYPE
SYNTAX RouterID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 32-bit integer uniquely identifying the neighboring
router in the Autonomous System."
::= { snOspfVirtNbrEntry 3 }
snOspfVirtNbrIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address this Virtual Neighbor is using."
::= { snOspfVirtNbrEntry 4 }
snOspfVirtNbrOptions OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A bit map corresponding to the neighbor's options
field. Thus, Bit 1, if set, indicates that the
neighbor supports Type of Service Routing; if zero, no
metrics other than TOS 0 are in use by the neighbor."
::= { snOspfVirtNbrEntry 5 }
snOspfVirtNbrState OBJECT-TYPE
SYNTAX INTEGER {
down (1),
attempt (2),
init (3),
twoWay (4),
exchangeStart (5),
exchange (6),
loading (7),
full (8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the Virtual Neighbor Relationship."
::= { snOspfVirtNbrEntry 6 }
snOspfVirtNbrEvents OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times this virtual link has changed its
state, or an error has occurred."
::= { snOspfVirtNbrEntry 7 }
snOspfVirtNbrLSRetransQLen OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current length of the retransmission queue."
::= { snOspfVirtNbrEntry 8 }
snOspfVirtNbrAreaIdFormat OBJECT-TYPE
SYNTAX INTEGER {
integer(0),
ipAddress(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used to specify whether
AreaId is represented as IP Address or
an Integer. The values
that can be written are:
integer(0).....as an integer.
ipAddress(1)...as IP Address."
::= { snOspfVirtNbrEntry 9 }
-- Section 9: OSPF Link State Database
-- The Link State Database contains the Link State
-- Advertisements from throughout the areas that the
-- device is attached to.
snOspfLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnOspfLsdbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The OSPF Process's Links State Database."
REFERENCE
"OSPF Version 2, Section 12 Link State Advertisements"
::= { snOspfLsdb 1 }
snOspfLsdbEntry OBJECT-TYPE
SYNTAX SnOspfLsdbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single Link State Advertisement."
INDEX { snOspfLsdbEntryIndex }
::= { snOspfLsdbTable 1 }
SnOspfLsdbEntry ::=
SEQUENCE {
snOspfLsdbEntryIndex
INTEGER,
snOspfLsdbAreaId
AreaID,
snOspfLsdbType
INTEGER,
snOspfLsdbLsId
IpAddress,
snOspfLsdbRouterId
RouterID,
snOspfLsdbSequence
INTEGER,
snOspfLsdbAge
INTEGER,
snOspfLsdbChecksum
INTEGER,
snOspfLsdbAdvertisement
OCTET STRING,
snOspfLsdbAreaIdFormat
INTEGER
}
snOspfLsdbEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table entry index of this Link State Database."
::= { snOspfLsdbEntry 1 }
snOspfLsdbAreaId OBJECT-TYPE
SYNTAX AreaID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32 bit identifier of the Area from which the LSA
was received."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { snOspfLsdbEntry 2 }
snOspfLsdbType OBJECT-TYPE
SYNTAX INTEGER {
routerLink (1),
networkLink (2),
summaryLink (3),
asSummaryLink (4),
asExternalLink (5),
multicastLink (6),
nssaExternalLink (7),
opaqueLink (9),
opaqueAreaLink (10),
opaqueAsLink (11)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of the link state advertisement. Each link
state type has a separate advertisement format."
REFERENCE
"OSPF Version 2, Appendix A.4.1 The Link State
Advertisement header"
::= { snOspfLsdbEntry 3 }
snOspfLsdbLsId OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address; it
identifies the piece of the routing domain that is
being described by the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.4 Link State ID"
::= { snOspfLsdbEntry 4 }
snOspfLsdbRouterId OBJECT-TYPE
SYNTAX RouterID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { snOspfLsdbEntry 5 }
-- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative.
snOspfLsdbSequence OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sequence number field is a signed 32-bit integer.
It is used to detect old and duplicate link state
advertisements. The space of sequence numbers is
linearly ordered. The larger the sequence number the
more recent the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence number"
::= { snOspfLsdbEntry 6 }
snOspfLsdbAge OBJECT-TYPE
SYNTAX INTEGER -- Should be 0..MaxAge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field is the age of the link state advertisement
in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { snOspfLsdbEntry 7 }
snOspfLsdbChecksum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field is the checksum of the complete contents of
the advertisement, excepting the age field. The age
field is excepted so that an advertisement's age can be
incremented without updating the checksum. The
checksum used is the same that is used for ISO
connectionless datagrams; it is commonly referred to as
the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { snOspfLsdbEntry 8 }
snOspfLsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..65535))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The entire Link State Advertisement, including its
header."
REFERENCE
"OSPF Version 2, Section 12 Link State Advertisements"
::= { snOspfLsdbEntry 9 }
snOspfLsdbAreaIdFormat OBJECT-TYPE
SYNTAX INTEGER {
integer(0),
ipAddress(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used to specify whether
AreaId is represented as IP Address or
an Integer. The values
that can be written are:
integer(0).....as an integer.
ipAddress(1)...as IP Address."
::= { snOspfLsdbEntry 10 }
-- Section 10: OSPF Link State Database, External
-- The Link State Database contains the Link State
-- Advertisements from throughout the areas that the
-- device is attached to.
-- This table is identical to the OSPF LSDB Table in
-- format, but contains only External Link State
-- Advertisements. The purpose is to allow external
-- LSAs to be displayed once for the router rather
-- than once in each non-stub area.
snOspfExtLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnOspfExtLsdbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The OSPF Process's Links State Database."
REFERENCE
"OSPF Version 2, Section 12 Link State Adver-
tisements"
::= { snOspfExtLsdb 1 }
snOspfExtLsdbEntry OBJECT-TYPE
SYNTAX SnOspfExtLsdbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single Link State Advertisement."
INDEX { snOspfExtLsdbEntryIndex }
::= { snOspfExtLsdbTable 1 }
SnOspfExtLsdbEntry ::=
SEQUENCE {
snOspfExtLsdbEntryIndex
INTEGER,
snOspfExtLsdbType
INTEGER,
snOspfExtLsdbLsId
IpAddress,
snOspfExtLsdbRouterId
RouterID,
snOspfExtLsdbSequence
INTEGER,
snOspfExtLsdbAge
INTEGER,
snOspfExtLsdbChecksum
INTEGER,
snOspfExtLsdbAdvertisement
OCTET STRING
}
snOspfExtLsdbEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table entry index of this Link State Database."
::= { snOspfExtLsdbEntry 1 }
snOspfExtLsdbType OBJECT-TYPE
SYNTAX INTEGER {
asExternalLink (5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of the link state advertisement.
Each link state type has a separate advertise-
ment format."
REFERENCE
"OSPF Version 2, Appendix A.4.1 The Link State
Advertisement header"
::= { snOspfExtLsdbEntry 2 }
snOspfExtLsdbLsId OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.4 Link State ID"
::= { snOspfExtLsdbEntry 3 }
snOspfExtLsdbRouterId OBJECT-TYPE
SYNTAX RouterID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { snOspfExtLsdbEntry 4 }
-- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative.
snOspfExtLsdbSequence OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence
number"
::= { snOspfExtLsdbEntry 5 }
snOspfExtLsdbAge OBJECT-TYPE
SYNTAX INTEGER -- Should be 0..MaxAge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field is the age of the link state adver-
tisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { snOspfExtLsdbEntry 6 }
snOspfExtLsdbChecksum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { snOspfExtLsdbEntry 7 }
snOspfExtLsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(36))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The entire Link State Advertisement, including
its header."
REFERENCE
"OSPF Version 2, Section 12 Link State Adver-
tisements"
::= { snOspfExtLsdbEntry 8 }
-- Section 11: OSPF Area Status Table
-- The OSPF Area Status Data Structure contains information
-- regarding the various areas. The interfaces and
-- virtual links are configured as part of these areas.
-- Area 0.0.0.0, by definition, is the Backbone Area
snOspfAreaStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnOspfAreaStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information describing the configured parameters and
cumulative statistics of the router's attached areas."
REFERENCE
"OSPF Version 2, Section 6 The Area Data Structure"
::= { snOspfAreaStatus 1 }
snOspfAreaStatusEntry OBJECT-TYPE
SYNTAX SnOspfAreaStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information describing the configured parameters and
cumulative statistics of one of the router's attached
areas."
INDEX { snOspfAreaStatusEntryIndex }
::= { snOspfAreaStatusTable 1 }
SnOspfAreaStatusEntry ::=
SEQUENCE {
snOspfAreaStatusEntryIndex
INTEGER,
snOspfAreaStatusAreaId
AreaID,
snOspfAreaStatusImportASExtern
INTEGER,
snOspfAreaStatusStubMetric
BigMetric,
snOspfAreaStatusSpfRuns
Counter,
snOspfAreaStatusAreaBdrRtrCount
Gauge,
snOspfAreaStatusASBdrRtrCount
Gauge,
snOspfAreaStatusLSACount
Gauge,
snOspfAreaStatusLSACksumSum
INTEGER,
snOspfAreaStatusAreaIdFormat
INTEGER
}
snOspfAreaStatusEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table entry index of this Area."
::= { snOspfAreaStatusEntry 1 }
snOspfAreaStatusAreaId OBJECT-TYPE
SYNTAX AreaID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 32-bit integer uniquely identifying an area. Area
ID 0.0.0.0 is used for the OSPF backbone."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { snOspfAreaStatusEntry 2 }
snOspfAreaStatusImportASExtern OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The area's support for importing AS external link-
state advertisements."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
DEFVAL { 1 }
::= { snOspfAreaStatusEntry 3 }
snOspfAreaStatusStubMetric OBJECT-TYPE
SYNTAX BigMetric
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The metric value applied at the default type of
service(ospfMetric). By default, this equals the
least metric at the type of service among the
interfaces to other areas. This Object exist if
only if the value of snOspfAreaSummary is
snOspfAreaSummary(2); Otherwise, an SNMP_GET/GET_NEXT
attempt of this Object will return NO_SUCH_NAME."
::= { snOspfAreaStatusEntry 4 }
snOspfAreaStatusSpfRuns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times that the intra-area route table
has been calculated using this area's link-state
database. This is typically done using Dijkstra's
algorithm."
::= { snOspfAreaStatusEntry 5 }
snOspfAreaStatusAreaBdrRtrCount OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of area border routers reachable
within this area. This is initially zero, and is
calculated in each SPF Pass."
DEFVAL { 0 }
::= { snOspfAreaStatusEntry 6 }
snOspfAreaStatusASBdrRtrCount OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of Autonomous System border routers
reachable within this area. This is initially zero,
and is calculated in each SPF Pass."
DEFVAL { 0 }
::= { snOspfAreaStatusEntry 7 }
snOspfAreaStatusLSACount OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of link-state advertisements in this
area's link-state database, excluding AS External
LSA's."
DEFVAL { 0 }
::= { snOspfAreaStatusEntry 8 }
snOspfAreaStatusLSACksumSum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 32-bit unsigned sum of the link-state
advertisements' LS checksums contained in this area's
link-state database. This sum excludes external (LS
type 5) link-state advertisements. The sum can be used
to determine if there has been a change in a router's
link state database, and to compare the link-state
database of two routers."
DEFVAL { 0 }
::= { snOspfAreaStatusEntry 9 }
snOspfAreaStatusAreaIdFormat OBJECT-TYPE
SYNTAX INTEGER {
integer(0),
ipAddress(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used to specify whether
AreaId is represented as IP Address or
an Integer. The values
that can be written are:
integer(0).....as an integer.
ipAddress(1)...as IP Address."
::= { snOspfAreaStatusEntry 10 }
-- Section 12: OSPF Interface Status Table
-- The OSPF Interface Status Table augments the ifStatusTable with OSPF
-- specific information.
snOspfIfStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnOspfIfStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The OSPF Interface Status Table describes the interfaces from
the viewpoint of OSPF."
::= { snOspfIfStatus 1 }
snOspfIfStatusEntry OBJECT-TYPE
SYNTAX SnOspfIfStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The OSPF Interface Entry describes one interface from
the viewpoint of OSPF."
INDEX { snOspfIfStatusEntryIndex }
::= { snOspfIfStatusTable 1 }
SnOspfIfStatusEntry ::=
SEQUENCE {
snOspfIfStatusEntryIndex
INTEGER,
snOspfIfStatusPort
INTEGER,
snOspfIfStatusIpAddress
IpAddress,
snOspfIfStatusAreaId
AreaID,
snOspfIfStatusType
INTEGER,
snOspfIfStatusAdminStat
RtrStatus,
snOspfIfStatusRtrPriority
DesignatedRouterPriority,
snOspfIfStatusTransitDelay
UpToMaxAge,
snOspfIfStatusRetransInterval
UpToMaxAge,
snOspfIfStatusHelloInterval
HelloRange,
snOspfIfStatusRtrDeadInterval
PositiveInteger,
snOspfIfStatusState
INTEGER,
snOspfIfStatusDesignatedRouter
IpAddress,
snOspfIfStatusBackupDesignatedRouter
IpAddress,
snOspfIfStatusEvents
Counter,
snOspfIfStatusAuthType
INTEGER,
snOspfIfStatusAuthKey
OCTET STRING,
snOspfIfStatusMetricValue
Metric,
snOspfIfStatusMd5AuthKeyId
INTEGER,
snOspfIfStatusMd5AuthKey
OCTET STRING,
snOspfIfStatusMd5ActivationWaitTime
INTEGER,
snOspfIfStatusAreaIdFormat
INTEGER
}
snOspfIfStatusEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table entry index of this Area."
::= { snOspfIfStatusEntry 1 }
snOspfIfStatusPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The physical router port of this OSPF interface."
::= { snOspfIfStatusEntry 2 }
snOspfIfStatusIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of this OSPF interface."
::= { snOspfIfStatusEntry 3 }
snOspfIfStatusAreaId OBJECT-TYPE
SYNTAX AreaID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A 32-bit integer uniquely identifying the area to
which the interface connects. Area ID 0.0.0.0 is used
for the OSPF backbone."
DEFVAL { '00000000'h } -- 0.0.0.0
::= { snOspfIfStatusEntry 4 }
snOspfIfStatusType OBJECT-TYPE
SYNTAX INTEGER {
broadcast (1),
nbma (2),
pointToPoint (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The OSPF interface type.
By way of a default, this field may be intuited from
the corresponding value of ifType. Broadcast LANs,
such as Ethernet and IEEE 802.5, take the value
'broadcast', X.25, Frame Relay, and similar
technologies take the value 'nbma', and links that are
definitively point to point take the value
'pointToPoint'."
::= { snOspfIfStatusEntry 5 }
snOspfIfStatusAdminStat OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The OSPF interface's administrative status. The value
'enabled' denotes that neighbor relationships may be
formed on the interface, and the interface will be
advertised as an internal route to some area. The
value 'disabled' denotes that the interface is external
to OSPF."
::= { snOspfIfStatusEntry 6 }
snOspfIfStatusRtrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The priority of this interface. Used in multi-access
networks, this field is used in the designated router
election algorithm. The value 0 signifies that the
router is not eligible to become the designated router
on this particular network. In the event of a tie in
this value, routers will use their router id as a tie
breaker."
DEFVAL { 1 }
::= { snOspfIfStatusEntry 7 }
snOspfIfStatusTransitDelay OBJECT-TYPE
SYNTAX UpToMaxAge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The estimated number of seconds it takes to transmit a
link- state update packet over this interface."
DEFVAL { 1 }
::= { snOspfIfStatusEntry 8 }
snOspfIfStatusRetransInterval OBJECT-TYPE
SYNTAX UpToMaxAge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of seconds between link-state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when retransmitting
database description and link-state request packets."
DEFVAL { 5 }
::= { snOspfIfStatusEntry 9 }
snOspfIfStatusHelloInterval OBJECT-TYPE
SYNTAX HelloRange
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The length of time, in seconds, between the Hello
packets that the router sends on the interface. This
value must be the same for all routers attached to a
common network."
DEFVAL { 10 }
::= { snOspfIfStatusEntry 10 }
snOspfIfStatusRtrDeadInterval OBJECT-TYPE
SYNTAX PositiveInteger
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of seconds that a router's Hello packets
have not been seen before it's neighbors declare the
router down. This should be some multiple of the Hello
interval. This value must be the same for all routers
attached to a common network."
DEFVAL { 40 }
::= { snOspfIfStatusEntry 11 }
snOspfIfStatusState OBJECT-TYPE
SYNTAX INTEGER {
down (1),
loopback (2),
waiting (3),
pointToPoint (4),
designatedRouter (5),
backupDesignatedRouter (6),
otherDesignatedRouter (7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The OSPF Interface State."
DEFVAL { down }
::= { snOspfIfStatusEntry 12 }
snOspfIfStatusDesignatedRouter OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP Address of the Designated Router."
DEFVAL { '00000000'h } -- 0.0.0.0
::= { snOspfIfStatusEntry 13 }
snOspfIfStatusBackupDesignatedRouter OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP Address of the Backup Designated Router."
DEFVAL { '00000000'h } -- 0.0.0.0
::= { snOspfIfStatusEntry 14 }
snOspfIfStatusEvents OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times this OSPF interface has changed
its state, or an error has occurred."
::= { snOspfIfStatusEntry 15 }
snOspfIfStatusAuthType OBJECT-TYPE
SYNTAX INTEGER
-- none (0),
-- simplePassword (1)
-- reserved for specification by IANA (> 1)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The authentication type specified for an interface.
Additional authentication types may be assigned locally
on a per interface basis."
REFERENCE
"OSPF Version 2, Appendix E Authentication"
DEFVAL { 0 } -- no authentication, by default
::= { snOspfIfStatusEntry 16 }
snOspfIfStatusAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Authentication Key. If the Area's Authorization
Type is simplePassword, and the key length is shorter
than 8 octets, the agent will left adjust and zero fill
to 8 octets.
When read, snOspfIfStatusAuthKey always returns an Octet String
of length zero."
REFERENCE
"OSPF Version 2, Section 9 The Interface Data
Structure"
DEFVAL { '0000000000000000'h } -- 0.0.0.0.0.0.0.0
::= { snOspfIfStatusEntry 17 }
snOspfIfStatusMetricValue OBJECT-TYPE
SYNTAX Metric
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The metric of using this type of service on
this interface. The default value of the TOS 0
Metric is 10^8 / ifSpeed."
::= { snOspfIfStatusEntry 18 }
snOspfIfStatusMd5AuthKeyId OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The md5 authentication key ID. If the snOspfVirtIfAuthType
is set to md5, the value of snOspfIfMd5AuthKeyId must be
(1 to 255). This field identifies the algorithm and secret
key used to create the message digest appended to the OSPF
packet. Key Identifiers are unique per-interface
(or equivalently, per-subnet)."
::= { snOspfIfStatusEntry 19 }
snOspfIfStatusMd5AuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MD5 Authentication Key. If the Area's Authorization
Type is md5, and the key length is shorter than 16 octets,
the agent will left adjust and zero fill to 16 octets.
When read, snOspfIfMd5AuthKey always returns an Octet String
of length zero."
::= { snOspfIfStatusEntry 20 }
snOspfIfStatusMd5ActivationWaitTime OBJECT-TYPE
SYNTAX INTEGER (0..14400)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The md5 authentication key activation wait time is specified in second
and the maximum wait time is 14400 seconds (4 hours)."
::= { snOspfIfStatusEntry 21 }
snOspfIfStatusAreaIdFormat OBJECT-TYPE
SYNTAX INTEGER {
integer(0),
ipAddress(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used to specify whether
AreaId is represented as IP Address or
an Integer. The values
that can be written are:
integer(0).....as an integer.
ipAddress(1)...as IP Address."
::= { snOspfIfStatusEntry 22 }
-- Section 13: OSPF Virtual Interface Status Table
-- The Virtual Interface Status Table describes the virtual
-- links status data.
snOspfVirtIfStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnOspfVirtIfStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about this router's virtual interfaces."
REFERENCE
"OSPF Version 2, Appendix C.4 Virtual link parameters"
::= { snOspfVirtIfStatus 1 }
snOspfVirtIfStatusEntry OBJECT-TYPE
SYNTAX SnOspfVirtIfStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a single Virtual Interface."
INDEX { snOspfVirtIfStatusEntryIndex }
::= { snOspfVirtIfStatusTable 1 }
SnOspfVirtIfStatusEntry ::=
SEQUENCE {
snOspfVirtIfStatusEntryIndex
INTEGER,
snOspfVirtIfStatusAreaID
AreaID,
snOspfVirtIfStatusNeighbor
RouterID,
snOspfVirtIfStatusTransitDelay
UpToMaxAge,
snOspfVirtIfStatusRetransInterval
UpToMaxAge,
snOspfVirtIfStatusHelloInterval
HelloRange,
snOspfVirtIfStatusRtrDeadInterval
PositiveInteger,
snOspfVirtIfStatusState
INTEGER,
snOspfVirtIfStatusEvents
Counter,
snOspfVirtIfStatusAuthType
INTEGER,
snOspfVirtIfStatusAuthKey
OCTET STRING,
snOspfVirtIfStatusMd5AuthKeyId
INTEGER,
snOspfVirtIfStatusMd5AuthKey
OCTET STRING,
snOspfVirtIfStatusMd5ActivationWaitTime
INTEGER,
snOspfVirtIfStatusAreaIdFormat
INTEGER
}
snOspfVirtIfStatusEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table entry index of this Area."
::= { snOspfVirtIfStatusEntry 1 }
snOspfVirtIfStatusAreaID OBJECT-TYPE
SYNTAX AreaID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Transit Area that the Virtual Link traverses. By
definition, this is not 0.0.0.0 "
::= { snOspfVirtIfStatusEntry 2 }
snOspfVirtIfStatusNeighbor OBJECT-TYPE
SYNTAX RouterID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Router ID of the Virtual Neighbor."
::= { snOspfVirtIfStatusEntry 3 }
snOspfVirtIfStatusTransitDelay OBJECT-TYPE
SYNTAX UpToMaxAge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The estimated number of seconds it takes to transmit a
link- state update packet over this interface."
DEFVAL { 1 }
::= { snOspfVirtIfStatusEntry 4 }
snOspfVirtIfStatusRetransInterval OBJECT-TYPE
SYNTAX UpToMaxAge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of seconds between link-state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when retransmitting
database description and link-state request packets.
This value should be well over the expected round-trip
time."
DEFVAL { 5 }
::= { snOspfVirtIfStatusEntry 5 }
snOspfVirtIfStatusHelloInterval OBJECT-TYPE
SYNTAX HelloRange
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The length of time, in seconds, between the Hello
packets that the router sends on the interface. This
value must be the same for the virtual neighbor."
DEFVAL { 10 }
::= { snOspfVirtIfStatusEntry 6 }
snOspfVirtIfStatusRtrDeadInterval OBJECT-TYPE
SYNTAX PositiveInteger
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of seconds that a router's Hello packets
have not been seen before it's neighbors declare the
router down. This should be some multiple of the Hello
interval. This value must be the same for the virtual
neighbor."
DEFVAL { 60 }
::= { snOspfVirtIfStatusEntry 7 }
snOspfVirtIfStatusState OBJECT-TYPE
SYNTAX INTEGER {
down (1),
pointToPoint (4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The OSPF virtual interfaces states."
DEFVAL { down }
::= { snOspfVirtIfStatusEntry 8 }
snOspfVirtIfStatusEvents OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of state changes or error events on
this Virtual Link."
::= { snOspfVirtIfStatusEntry 9 }
snOspfVirtIfStatusAuthType OBJECT-TYPE
SYNTAX INTEGER
-- none (0),
-- simplePassword (1)
-- reserved for specification by IANA (> 1)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The authentication type specified for an interface.
Additional authentication types may be assigned locally
on a per interface basis."
REFERENCE
"OSPF Version 2, Appendix E Authentication"
DEFVAL { 0 } -- no authentication, by default
::= { snOspfVirtIfStatusEntry 10 }
snOspfVirtIfStatusAuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If Authentication Type is simplePassword, the device
will left adjust and zero fill to 8 octets.
When read, snOspfVifAuthKey always returns a string of
length zero."
REFERENCE
"OSPF Version 2, Section 9 The Interface Data
Structure"
DEFVAL { '0000000000000000'h } -- 0.0.0.0.0.0.0.0
::= { snOspfVirtIfStatusEntry 11 }
snOspfVirtIfStatusMd5AuthKeyId OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The md5 authentication key ID. If the snOspfVirtIfAuthType
is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be
(1 to 255). This field identifies the algorithm and secret
key used to create the message digest appended to the OSPF
packet. Key Identifiers are unique per-interface
(or equivalently, per-subnet)."
::= { snOspfVirtIfStatusEntry 12 }
snOspfVirtIfStatusMd5AuthKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MD5 Authentication Key. If the Area's Authorization
Type is md5, and the key length is shorter than 16 octets,
the agent will left adjust and zero fill to 16 octets.
When read, snOspfIfMd5AuthKey always returns an Octet String
of length zero."
REFERENCE
"OSPF Version 2, Section 9 The Interface Data
Structure"
DEFVAL { '0000000000000000'h } -- 0.0.0.0.0.0.0.0
::= { snOspfVirtIfStatusEntry 13 }
snOspfVirtIfStatusMd5ActivationWaitTime OBJECT-TYPE
SYNTAX INTEGER (0..14400)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The md5 authentication key activation wait time is specified in second
and the maximum wait time is 14400 seconds (4 hours)."
::= { snOspfVirtIfStatusEntry 14 }
snOspfVirtIfStatusAreaIdFormat OBJECT-TYPE
SYNTAX INTEGER {
integer(0),
ipAddress(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used to specify whether
AreaId is represented as IP Address or
an Integer. The values
that can be written are:
integer(0).....as an integer.
ipAddress(1)...as IP Address."
::= { snOspfVirtIfStatusEntry 15 }
-- Section 14: OSPF Routing Information Table
-- The OSPF Routing Information Table describes the OSPF ABR/ASBR
-- routing information.
snOspfRoutingInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnOspfRoutingInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about this router's routing information."
::= { snOspfRoutingInfo 1 }
snOspfRoutingInfoEntry OBJECT-TYPE
SYNTAX SnOspfRoutingInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a single ABR/ASBR Routing entry."
INDEX { snOspfRoutingInfoIndex }
::= { snOspfRoutingInfoTable 1 }
SnOspfRoutingInfoEntry ::=
SEQUENCE {
snOspfRoutingInfoIndex
INTEGER,
snOspfRoutingInfoRouterID
RouterID,
snOspfRoutingInfoRouterType
INTEGER,
snOspfRoutingInfoNextHopRouterID
RouterID,
snOspfRoutingInfoOutgoingInterface
INTEGER
}
snOspfRoutingInfoIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table entry index of this Routing entry."
::= { snOspfRoutingInfoEntry 1 }
snOspfRoutingInfoRouterID OBJECT-TYPE
SYNTAX RouterID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Router ID of the destination router."
::= { snOspfRoutingInfoEntry 2 }
snOspfRoutingInfoRouterType OBJECT-TYPE
SYNTAX INTEGER {
abr (1),
asbr (2),
abrANDasbr(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Router type of the destination router as the following:
abr (1) -- area border router.
asbr (2) -- autonomous sytem border router.
abrANDasbr(3) -- area border and autonomous system border router."
::= { snOspfRoutingInfoEntry 3 }
snOspfRoutingInfoNextHopRouterID OBJECT-TYPE
SYNTAX RouterID
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The router ID of the next hop destination router."
::= { snOspfRoutingInfoEntry 4 }
snOspfRoutingInfoOutgoingInterface OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The outgoing interface of the destination router."
::= { snOspfRoutingInfoEntry 5 }
-- Section 15: Trap Support Objects
-- The following are support objects for the OSPF traps.
snOspfSetTrap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A four-octet string serving as a bit map for
the trap events defined by the OSPF traps. This
object is used to enable and disable specific
OSPF traps where a 1 in the bit field
represents enabled. The right-most bit (least
significant) represents trap 0."
::= { snOspfTrapControl 1 }
snOspfConfigErrorType OBJECT-TYPE
SYNTAX INTEGER {
badVersion (1),
areaMismatch (2),
unknownNbmaNbr (3), -- Router is Dr eligible
unknownVirtualNbr (4),
authTypeMismatch(5),
authFailure (6),
netMaskMismatch (7),
helloIntervalMismatch (8),
deadIntervalMismatch (9),
optionMismatch (10) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Potential types of configuration conflicts.
Used by the ospfConfigError and ospfConfigVir-
tError traps."
::= { snOspfTrapControl 2 }
snOspfPacketType OBJECT-TYPE
SYNTAX INTEGER {
hello (1),
dbDescript (2),
lsReq (3),
lsUpdate (4),
lsAck (5) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"OSPF packet types."
::= { snOspfTrapControl 3 }
snOspfPacketSrc OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of an inbound packet that can-
not be identified by a neighbor instance."
::= { snOspfTrapControl 4 }
snOspfTrapsGenerationMode OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates if the generation of any OSPF traps is permitted on the router.
The value 'enabled' denotes that the OSPF Traps can be generated by the
router; 'disabled' denotes that the OSPF Traps can not be generated by the
router even when snOspfSetTrap indicates the generation of specific OSPF Traps.
This object provides global control on the generation of ospf traps."
::= { snOspfTrapControl 5 }
END
HP-SN-IP-MIB DEFINITIONS ::= BEGIN
-- Foundry SnRouter Group MIB Release 1.0.0
-- Revision 0 1/7/97
-- Copyright 1996-97 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry Networks SNMP Management Information Base
-- Specification embodies Foundry Networks' confidential and
-- proprietary intellectual property. Foundry Networks retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS," and Foundry Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
-- SECTION 1: Top Level Definitions
-- Imports
IMPORTS
IpAddress, Counter, TimeTicks
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
InterfaceIndex
FROM IF-MIB
snIp, snRip, snDvmrp, snFsrp, snGblRt, snPim, snLoopbackIf
FROM HP-SN-ROOT-MIB;
-- textual conventions
DisplayString ::= OCTET STRING
-- RtrStatus Values
RtrStatus ::= INTEGER { disabled(0), enabled (1) }
-- Clear Status Values
ClearStatus ::= INTEGER { normal(0), clear(1) }
-- Row Creation/Deletion Values
RowSts ::= INTEGER { other(1),
valid(2),
delete(3),
create(4)
}
-- Port index
PortIndex ::= INTEGER (1..3900)
-- The port index.
-- For FastIron/NetIron products, port index value is from 1 to 42
-- For BigIron products, port index is an encoded number:
-- The bit 0 to bit 7: port number.
-- The bit 8 to bit 11: slot number.
-- For virtual router interface, slot number is 15,
-- port number is the virtual router port from 1 to 60.
-- Therefore, port index value for BigIron is from 257 to 3900.
-- Action
Action ::= INTEGER { deny(0), permit(1) }
PhysAddress ::=
OCTET STRING
-- This data type is used to model media addresses. For many
-- types of media, this will be in a binary representation.
-- For example, an ethernet address would be represented as
-- a string of 6 octets.
-- The OSPF Metric is defined as an unsigned value in the range
Metric ::= INTEGER (0..65535)
PortMask ::=
INTEGER
-- This data type is used to model port bitmask. The
-- maximum of ports are 32.
-- SECTION 2: MIB
-- Global Router MIB
-- This section contains global MIB object definitions applicable to the
-- switching router. These objects should be independent to any routing
-- protocol.
snGblRtGeneral OBJECT IDENTIFIER ::= { snGblRt 1 }
snGblRtRouteOnly OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If this object is 'enabled', this switching router will only
route packets. If this object is 'disabled', this switching
router will first route packets. If route cannot perform,
it will switch packets."
::= { snGblRtGeneral 1 }
-- Router IP MIB
-- This section contains IP specific router MIB object definitions.
-- IP general group
snRtIpGeneral OBJECT IDENTIFIER ::= { snIp 1 }
snRtClearArpCache OBJECT-TYPE
SYNTAX ClearStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear(1) will clear arp cache table."
::= { snRtIpGeneral 1 }
snRtClearIpCache OBJECT-TYPE
SYNTAX ClearStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear(1) will clear ip route cache table."
::= { snRtIpGeneral 2 }
snRtClearIpRoute OBJECT-TYPE
SYNTAX ClearStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear(1) will clear ip route table."
::= { snRtIpGeneral 3 }
snRtBootpServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS deprecated
DESCRIPTION
"IP address of bootp server to
which bootp packet need to be relayed."
::= { snRtIpGeneral 4 }
snRtBootpRelayMax OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum number of hop the bootp packet
should travel."
::= { snRtIpGeneral 5 }
snRtArpAge OBJECT-TYPE
SYNTAX INTEGER (0..240)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time in minutes an ARP entry can
be valid without relearning.
0 - Don't not age."
::= { snRtIpGeneral 6 }
snRtIpIrdpEnable OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform router advertisement on this box."
::= { snRtIpGeneral 7 }
snRtIpLoadShare OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If more than one route available,
use them to share load."
::= { snRtIpGeneral 8 }
snRtIpProxyArp OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable proxy arp function
in the box."
::= { snRtIpGeneral 9 }
snRtIpRarp OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable RARP server."
::= { snRtIpGeneral 10 }
snRtIpTtl OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time to live value to be used
in IP header of IP packet generated
by the box."
::= { snRtIpGeneral 11 }
snRtIpSetAllPortConfig OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is an index number of a
snRtIpPortConfigTable row (i.e. snRtIpPortConfigPortIndex),
which is the selected row to copy all of its read-writable
data (i.e. snRtIpPortMtu and snRtIpPortEncap) to the rest
of the rows in snRtIpPortConfigTable.
Note: prior setting this object, all the intended data of
the given row of the table must be set. Otherwise, the
current data of the row will be used to set the entire ip
interface configuration table. The previous setting will
be overwritten by the new one."
::= { snRtIpGeneral 12 }
snRtIpFwdCacheMaxEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of ip forwarding table entries."
::= { snRtIpGeneral 13 }
snRtIpFwdCacheCurEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current number of ip forwarding table entries."
::= { snRtIpGeneral 14 }
snRtIpMaxStaticRouteEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of static route entries in the static route table."
::= { snRtIpGeneral 15 }
snRtIpDirBcastFwd OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable directed broadcast forwarding."
DEFVAL { enabled }
::= { snRtIpGeneral 16 }
snRtIpLoadShareNumOfPaths OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of routes are used to share load."
::= { snRtIpGeneral 17 }
snRtIpLoadShareMaxPaths OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum number of routes can be configured to share load."
::= { snRtIpGeneral 18 }
snRtIpLoadShareMinPaths OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Minimum number of routes can be configured to share load."
::= { snRtIpGeneral 19 }
snRtIpProtocolRouterId OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Router Id for all IP Protocols."
::= { snRtIpGeneral 20 }
snRtIpSourceRoute OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable source routing support, ability to drop the
source routing packets."
DEFVAL { enabled }
::= { snRtIpGeneral 21 }
-- IP static route table
snRtIpStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpStaticRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP static/default route table."
::= { snIp 2 }
snRtIpStaticRouteEntry OBJECT-TYPE
SYNTAX SnRtIpStaticRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP static route table."
INDEX { snRtIpStaticRouteIndex }
::= { snRtIpStaticRouteTable 1 }
SnRtIpStaticRouteEntry ::= SEQUENCE {
snRtIpStaticRouteIndex
INTEGER,
snRtIpStaticRouteDest
IpAddress,
snRtIpStaticRouteMask
IpAddress,
snRtIpStaticRouteNextHop
IpAddress,
snRtIpStaticRouteMetric
INTEGER,
snRtIpStaticRouteRowStatus
RowSts,
snRtIpStaticRouteDistance
INTEGER
}
snRtIpStaticRouteIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a static route entry."
::= { snRtIpStaticRouteEntry 1 }
snRtIpStaticRouteDest OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP address.
0.0.0.0 for default route."
::= { snRtIpStaticRouteEntry 2 }
snRtIpStaticRouteMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Subnet mask associated with
the destination IP address.
0.0.0.0 for default route mask."
::= { snRtIpStaticRouteEntry 3 }
snRtIpStaticRouteNextHop OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP address of next hop router that
is located on one of the directly
attached IP subnet."
::= { snRtIpStaticRouteEntry 4 }
snRtIpStaticRouteMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The metrics to next hop router."
::= { snRtIpStaticRouteEntry 5 }
snRtIpStaticRouteRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a static route
entry."
::= { snRtIpStaticRouteEntry 6 }
snRtIpStaticRouteDistance OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Administration distance."
::= { snRtIpStaticRouteEntry 7 }
-- ip filter table
snRtIpFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP filter table."
::= { snIp 3 }
snRtIpFilterEntry OBJECT-TYPE
SYNTAX SnRtIpFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP filter table."
INDEX { snRtIpFilterIndex }
::= { snRtIpFilterTable 1 }
SnRtIpFilterEntry ::= SEQUENCE {
snRtIpFilterIndex
INTEGER,
snRtIpFilterAction
INTEGER,
snRtIpFilterProtocol
INTEGER,
snRtIpFilterSourceIp
IpAddress,
snRtIpFilterSourceMask
IpAddress,
snRtIpFilterDestIp
IpAddress,
snRtIpFilterDestMask
IpAddress,
snRtIpFilterOperator
INTEGER,
snRtIpFilterOperand
INTEGER,
snRtIpFilterRowStatus
RowSts,
snRtIpFilterEstablished
RtrStatus,
snRtIpFilterQosPriority
INTEGER
}
snRtIpFilterIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a filter entry."
::= { snRtIpFilterEntry 1 }
snRtIpFilterAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1), qosEnabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the ip packet match
with this filter."
::= { snRtIpFilterEntry 2 }
snRtIpFilterProtocol OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Transport protocol. 0 means don't care"
::= { snRtIpFilterEntry 3 }
snRtIpFilterSourceIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source IP address."
::= { snRtIpFilterEntry 4 }
snRtIpFilterSourceMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source IP subnet mask."
::= { snRtIpFilterEntry 5 }
snRtIpFilterDestIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP address."
::= { snRtIpFilterEntry 6 }
snRtIpFilterDestMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP subnet mask."
::= { snRtIpFilterEntry 7 }
snRtIpFilterOperator OBJECT-TYPE
SYNTAX INTEGER { greater(1), equal(2), less(3), notEqual(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Type of comparison to perform.
for now, this only applys to tcp or udp
to compare the port number"
::= { snRtIpFilterEntry 8 }
snRtIpFilterOperand OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For now this only refers to transport
protocol port number. 0 means NA"
::= { snRtIpFilterEntry 9 }
snRtIpFilterRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a filter
entry."
::= { snRtIpFilterEntry 10 }
snRtIpFilterEstablished OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable the filtering of established TCP
packets of which the ACK or RESET flag is on. This
additional filter only applies to TCP transport
protocol."
::= { snRtIpFilterEntry 11 }
snRtIpFilterQosPriority OBJECT-TYPE
SYNTAX INTEGER {
level0(0),
level1(1),
level2(2),
level3(3),
level4(4),
level5(5),
level6(6),
level7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The router L4 Qos Priority values are:
low(0) -- low prority
high(1) -- high prority.
The Priority values are:
level0(0), level1(1), level2(2), level3(3),
level4(4), level5(5), level6(6), level7(7) "
::= { snRtIpFilterEntry 12 }
-- RARP table
snRtIpRarpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpRarpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP RARP table."
::= { snIp 4 }
snRtIpRarpEntry OBJECT-TYPE
SYNTAX SnRtIpRarpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP Rarp table."
INDEX { snRtIpRarpIndex }
::= { snRtIpRarpTable 1 }
SnRtIpRarpEntry ::= SEQUENCE {
snRtIpRarpIndex
INTEGER,
snRtIpRarpMac
OCTET STRING,
snRtIpRarpIp
IpAddress,
snRtIpRarpRowStatus
RowSts
}
snRtIpRarpIndex OBJECT-TYPE
SYNTAX INTEGER (1..16)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a Rarp entry."
::= { snRtIpRarpEntry 1 }
snRtIpRarpMac OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Mac address for a Rarp entry."
::= { snRtIpRarpEntry 2 }
snRtIpRarpIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address for a Rarp entry."
::= { snRtIpRarpEntry 3 }
snRtIpRarpRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a Rarp
entry."
::= { snRtIpRarpEntry 4 }
-- Static ARP table
snRtStaticArpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtStaticArpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP static arp table."
::= { snIp 5 }
snRtStaticArpEntry OBJECT-TYPE
SYNTAX SnRtStaticArpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP static arp table."
INDEX { snRtStaticArpIndex }
::= { snRtStaticArpTable 1 }
SnRtStaticArpEntry ::= SEQUENCE {
snRtStaticArpIndex
INTEGER,
snRtStaticArpIp
IpAddress,
snRtStaticArpMac
OCTET STRING,
snRtStaticArpPort
PortIndex,
snRtStaticArpRowStatus
RowSts
}
snRtStaticArpIndex OBJECT-TYPE
SYNTAX INTEGER (1..16)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a static arp entry."
::= { snRtStaticArpEntry 1 }
snRtStaticArpIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address for a static arp entry."
::= { snRtStaticArpEntry 2 }
snRtStaticArpMac OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Mac address for a static arp entry."
::= { snRtStaticArpEntry 3 }
snRtStaticArpPort OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The port index for a static arp entry."
::= { snRtStaticArpEntry 4 }
snRtStaticArpRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a Static Arp
entry."
::= { snRtStaticArpEntry 5 }
-- ip interface address table
-- this table was replaced by the snRtIpPortIfAddrTable,
-- of which the index was changed to ifIndex, not another
-- indexing method used by this table
snRtIpPortAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpPortAddrEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP port address table."
::= { snIp 6 }
snRtIpPortAddrEntry OBJECT-TYPE
SYNTAX SnRtIpPortAddrEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry in the IP Port Address table."
INDEX { snRtIpPortAddrPortIndex, snRtIpPortAddress }
::= { snRtIpPortAddrTable 1 }
SnRtIpPortAddrEntry ::= SEQUENCE {
snRtIpPortAddrPortIndex
PortIndex,
snRtIpPortAddress
IpAddress,
snRtIpPortSubnetMask
IpAddress,
snRtIpPortAddrType
INTEGER,
snRtIpPortRowStatus
RowSts
}
snRtIpPortAddrPortIndex OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The port index for port address entry."
::= { snRtIpPortAddrEntry 1 }
snRtIpPortAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The port IP address."
::= { snRtIpPortAddrEntry 2 }
snRtIpPortSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The port IP address subnet mask."
::= { snRtIpPortAddrEntry 3 }
snRtIpPortAddrType OBJECT-TYPE
SYNTAX INTEGER { primary(1), secondary(2) }
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The port IP address type."
DEFVAL { primary }
::= { snRtIpPortAddrEntry 4 }
snRtIpPortRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS deprecated
DESCRIPTION
"To create or delete a port address
entry."
::= { snRtIpPortAddrEntry 5 }
-- ip interface access table
-- this table was replaced by the snRtIpPortIfAccessTable,
-- of which the index was changed to ifIndex, not another
-- indexing method used by this table
snRtIpPortAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpPortAccessEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP port access table."
::= { snIp 7 }
snRtIpPortAccessEntry OBJECT-TYPE
SYNTAX SnRtIpPortAccessEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry in the IP Port access table."
INDEX { snRtIpPortAccessPortIndex, snRtIpPortAccessDirection }
::= { snRtIpPortAccessTable 1 }
SnRtIpPortAccessEntry ::= SEQUENCE {
snRtIpPortAccessPortIndex
PortIndex,
snRtIpPortAccessDirection
INTEGER,
snRtIpPortAccessFilters
OCTET STRING,
snRtIpPortAccessRowStatus
RowSts
}
snRtIpPortAccessPortIndex OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The port index for port access entry."
::= { snRtIpPortAccessEntry 1 }
snRtIpPortAccessDirection OBJECT-TYPE
SYNTAX INTEGER { in(1), out(2) }
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The incoming or outgoing check
for port access."
::= { snRtIpPortAccessEntry 2 }
snRtIpPortAccessFilters OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS deprecated
DESCRIPTION
"1st octet correspond to 1st filter
number and so on."
::= { snRtIpPortAccessEntry 3 }
snRtIpPortAccessRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS deprecated
DESCRIPTION
"To create or delete a port access
entry."
::= { snRtIpPortAccessEntry 4 }
-- ip interface configuration table
-- this table was replaced by the snRtIpPortIfConfigTable,
-- of which the index was changed to ifIndex, not another
-- indexing method used by this table
snRtIpPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpPortConfigEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP port Config table."
::= { snIp 8 }
snRtIpPortConfigEntry OBJECT-TYPE
SYNTAX SnRtIpPortConfigEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry in the IP Port Config table."
INDEX { snRtIpPortConfigPortIndex }
::= { snRtIpPortConfigTable 1 }
SnRtIpPortConfigEntry ::= SEQUENCE {
snRtIpPortConfigPortIndex
PortIndex,
snRtIpPortMtu
INTEGER,
snRtIpPortEncap
INTEGER,
snRtIpPortMetric
INTEGER,
snRtIpPortDirBcastFwd
RtrStatus
}
snRtIpPortConfigPortIndex OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The port index for port config entry."
::= { snRtIpPortConfigEntry 1 }
snRtIpPortMtu OBJECT-TYPE
SYNTAX INTEGER (576..4470)
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The maximun transfer unit."
::= { snRtIpPortConfigEntry 2 }
snRtIpPortEncap OBJECT-TYPE
SYNTAX INTEGER {
ethernet(1),
snap(2),
hdlc(3),
ppp(4)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Data link encapsulation to be used
on the IP frame transmitted on the
port."
::= { snRtIpPortConfigEntry 3 }
snRtIpPortMetric OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The metric."
DEFVAL { 1 }
::= { snRtIpPortConfigEntry 4 }
snRtIpPortDirBcastFwd OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Enable/Disable directed broadcast forwarding on the port."
DEFVAL { enabled }
::= { snRtIpPortConfigEntry 5 }
-- ip interface address table, PortIndex is changed to ifIndex
snRtIpPortIfAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpPortIfAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP port If address table."
::= { snIp 18 }
snRtIpPortIfAddrEntry OBJECT-TYPE
SYNTAX SnRtIpPortIfAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP Port Address table."
INDEX { snRtIpPortIfAddrInterfaceIndex, snRtIpPortIfAddress }
::= { snRtIpPortIfAddrTable 1 }
SnRtIpPortIfAddrEntry ::= SEQUENCE {
snRtIpPortIfAddrInterfaceIndex
InterfaceIndex,
snRtIpPortIfAddress
IpAddress,
snRtIpPortIfSubnetMask
IpAddress,
snRtIpPortIfAddrType
INTEGER,
snRtIpPortIfRowStatus
RowSts
}
snRtIpPortIfAddrInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The InterfaceIndex for port address entry."
::= { snRtIpPortIfAddrEntry 1 }
snRtIpPortIfAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port IP address."
::= { snRtIpPortIfAddrEntry 2 }
snRtIpPortIfSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The port IP address subnet mask."
::= { snRtIpPortIfAddrEntry 3 }
snRtIpPortIfAddrType OBJECT-TYPE
SYNTAX INTEGER { primary(1), secondary(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The port IP address type."
DEFVAL { primary }
::= { snRtIpPortIfAddrEntry 4 }
snRtIpPortIfRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a port address
entry."
::= { snRtIpPortIfAddrEntry 5 }
-- ip interface access table, PortIndex is changed to ifIndex
snRtIpPortIfAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpPortIfAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP port If access table."
::= { snIp 19 }
snRtIpPortIfAccessEntry OBJECT-TYPE
SYNTAX SnRtIpPortIfAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP Port access table."
INDEX { snRtIpPortIfAccessInterfaceIndex, snRtIpPortIfAccessDirection }
::= { snRtIpPortIfAccessTable 1 }
SnRtIpPortIfAccessEntry ::= SEQUENCE {
snRtIpPortIfAccessInterfaceIndex
InterfaceIndex,
snRtIpPortIfAccessDirection
INTEGER,
snRtIpPortIfAccessFilters
OCTET STRING,
snRtIpPortIfAccessRowStatus
RowSts
}
snRtIpPortIfAccessInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The InterfaceIndex for port access entry."
::= { snRtIpPortIfAccessEntry 1 }
snRtIpPortIfAccessDirection OBJECT-TYPE
SYNTAX INTEGER { in(1), out(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The incoming or outgoing check
for port access."
::= { snRtIpPortIfAccessEntry 2 }
snRtIpPortIfAccessFilters OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"1st octet correspond to 1st filter
number and so on."
::= { snRtIpPortIfAccessEntry 3 }
snRtIpPortIfAccessRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a port access
entry."
::= { snRtIpPortIfAccessEntry 4 }
-- ip interface configuration table, PortIndex is changed to ifIndex
snRtIpPortIfConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpPortIfConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP port If Config table."
::= { snIp 20 }
snRtIpPortIfConfigEntry OBJECT-TYPE
SYNTAX SnRtIpPortIfConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP Port Config table."
INDEX { snRtIpPortIfConfigInterfaceIndex }
::= { snRtIpPortIfConfigTable 1 }
SnRtIpPortIfConfigEntry ::= SEQUENCE {
snRtIpPortIfConfigInterfaceIndex
InterfaceIndex,
snRtIpPortIfMtu
INTEGER,
snRtIpPortIfEncap
INTEGER,
snRtIpPortIfMetric
INTEGER,
snRtIpPortIfDirBcastFwd
RtrStatus
}
snRtIpPortIfConfigInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The If index for port config entry."
::= { snRtIpPortIfConfigEntry 1 }
snRtIpPortIfMtu OBJECT-TYPE
SYNTAX INTEGER (576..4470)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximun transfer unit."
::= { snRtIpPortIfConfigEntry 2 }
snRtIpPortIfEncap OBJECT-TYPE
SYNTAX INTEGER {
ethernet(1),
snap(2),
hdlc(3),
ppp(4),
other(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Data link encapsulation to be used
on the IP frame transmitted on the
port."
::= { snRtIpPortIfConfigEntry 3 }
snRtIpPortIfMetric OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The metric."
DEFVAL { 1 }
::= { snRtIpPortIfConfigEntry 4 }
snRtIpPortIfDirBcastFwd OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable directed broadcast forwarding on the port."
DEFVAL { enabled }
::= { snRtIpPortIfConfigEntry 5 }
-- Broadcast forwarding group
snRtBcastFwd OBJECT IDENTIFIER ::= { snIp 9 }
snRtBcastFwdGeneral OBJECT IDENTIFIER ::= { snRtBcastFwd 1 }
snRtUdpBcastFwdPort OBJECT IDENTIFIER ::= { snRtBcastFwd 2 }
snRtUdpHelper OBJECT IDENTIFIER ::= { snRtBcastFwd 3 }
-- General UDP broadcast forwarding group
snRtUdpBcastFwdEnable OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable UDP broadcast forwarding service.
When UDP broadcast forwarding is enabled, default
entries are added to the UDP broadcast forwarding
port table. When it is disabled, UDP broadcast
forwarding port table is flushed to empty."
DEFVAL { enabled }
::= { snRtBcastFwdGeneral 1 }
-- UDP broadcast forwarding port table
snRtUdpBcastFwdPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtUdpBcastFwdPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains a list of UDP port numbers
for which forwarding UDP broadcast is enabled."
::= { snRtUdpBcastFwdPort 1 }
snRtUdpBcastFwdPortEntry OBJECT-TYPE
SYNTAX SnRtUdpBcastFwdPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the UDP broadcast forwarding
port table."
INDEX { snRtUdpBcastFwdPortIndex }
::= { snRtUdpBcastFwdPortTable 1 }
SnRtUdpBcastFwdPortEntry ::= SEQUENCE {
snRtUdpBcastFwdPortIndex
INTEGER,
snRtUdpBcastFwdPortNumber
INTEGER,
snRtUdpBcastFwdPortRowStatus
RowSts
}
snRtUdpBcastFwdPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..20)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a UDP broadcast forwarding
port entry."
::= { snRtUdpBcastFwdPortEntry 1 }
snRtUdpBcastFwdPortNumber OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"UDP port number for which UDP broadcast forwarding
is enabled."
::= { snRtUdpBcastFwdPortEntry 2 }
snRtUdpBcastFwdPortRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a UDP broadcast forwarding
port entry."
::= { snRtUdpBcastFwdPortEntry 3 }
-- UDP helper table
snRtUdpHelperTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtUdpHelperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"UDP helper table."
::= { snRtUdpHelper 1 }
snRtUdpHelperEntry OBJECT-TYPE
SYNTAX SnRtUdpHelperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the UDP helper table."
INDEX { snRtUdpHelperPortIndex, snRtUdpHelperIndex }
::= { snRtUdpHelperTable 1 }
SnRtUdpHelperEntry ::= SEQUENCE {
snRtUdpHelperPortIndex
PortIndex,
snRtUdpHelperIndex
INTEGER,
snRtUdpHelperAddr
IpAddress,
snRtUdpHelperRowStatus
RowSts
}
snRtUdpHelperPortIndex OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port index for a UDP helper entry."
::= { snRtUdpHelperEntry 1 }
snRtUdpHelperIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a UDP helper entry."
::= { snRtUdpHelperEntry 2 }
snRtUdpHelperAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The UDP helper address. This is the address that
UDP packets will be forwarded. It can be a helper
address or a subnet broadcast address. But it
cannot be 255.255.255.255 or 0.0.0.0."
::= { snRtUdpHelperEntry 3 }
snRtUdpHelperRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a UDP helper entry."
::= { snRtUdpHelperEntry 4 }
-- Trace route group
-- This group uses the following method to detect routes used to reach
-- a destination address. The originating router sends a probe packet
-- (a UDP packet) to the destination address with TTL of 1. The first
-- router that receives this packet decrements the TTL, then drops the
-- packet and returns a ICMP packet to the originator. The originating
-- router records the route in snRtIpTraceRouteResultTable. The ori-
-- ginating router sends a probe packet (a UDP packet) to the des-
-- tination address with TTL of 2. The second router that receives
-- this packet decrements the TTL, then drops the packet and returns
-- a ICMP packet to the originator. The originating router records the
-- route in snRtIpTraceRouteResultTable. This procedure is repeated
-- until the destination is reached, or the maximum TTL is reached.
snRtIpTraceRoute OBJECT IDENTIFIER ::= { snIp 10 }
snRtIpTraceRouteGeneral OBJECT IDENTIFIER ::= { snRtIpTraceRoute 1 }
snRtIpTraceRouteResult OBJECT IDENTIFIER ::= { snRtIpTraceRoute 2 }
-- General trace route group
snRtIpTraceRouteTargetAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Target IP address of which trace route is performed."
::= { snRtIpTraceRouteGeneral 1 }
snRtIpTraceRouteMinTtl OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Minimum TTL value carried in the first probe packet."
DEFVAL { 1 }
::= { snRtIpTraceRouteGeneral 2 }
snRtIpTraceRouteMaxTtl OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum TTL value carried in the last probe packet."
DEFVAL { 30 }
::= { snRtIpTraceRouteGeneral 3 }
snRtIpTraceRouteTimeOut OBJECT-TYPE
SYNTAX INTEGER (1..120)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Time out period (in seconds) to wait for the response
from the probe packet (i,e, the ICMP packet)."
DEFVAL { 2 }
::= { snRtIpTraceRouteGeneral 4 }
snRtIpTraceRouteControl OBJECT-TYPE
SYNTAX INTEGER {
start(1),
abort(2),
success(3),
failure(4),
inProgress(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Only 'start' and 'abort' are writable values; 'success',
'failure' and 'inProgress' are readeable (or returned)
values.
Writing 'start' to this object to initiate the trace route
operation. snRtIpTraceRouteDestAddr must have been init-
ialized before 'start' is writen.
This object will return 'inProgress' after trace route
operation has started. During the 'inProgress' state,
writing 'abort' to this object will stop the current
trace route operation.
If the destination address is reached, this object
returned 'success'. snRtIpTraceRouteResultTable
contains the routes (and the target address) to
reach the destination address. If the destination
address does not reach, timeout, or ending TTL
reached, 'failure' is returned."
::= { snRtIpTraceRouteGeneral 5 }
-- Trace route result table
snRtIpTraceRouteResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpTraceRouteResultEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Trace route result table."
::= { snRtIpTraceRouteResult 1 }
snRtIpTraceRouteResultEntry OBJECT-TYPE
SYNTAX SnRtIpTraceRouteResultEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the trace route result table."
INDEX { snRtIpTraceRouteResultIndex }
::= { snRtIpTraceRouteResultTable 1 }
SnRtIpTraceRouteResultEntry ::= SEQUENCE {
snRtIpTraceRouteResultIndex
INTEGER,
snRtIpTraceRouteResultAddr
IpAddress,
snRtIpTraceRouteResultRoundTripTime1
TimeTicks,
snRtIpTraceRouteResultRoundTripTime2
TimeTicks
}
snRtIpTraceRouteResultIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a trace route result entry."
::= { snRtIpTraceRouteResultEntry 1 }
snRtIpTraceRouteResultAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The router or the target address of which forms
part of the route to reach the destination address."
::= { snRtIpTraceRouteResultEntry 2 }
snRtIpTraceRouteResultRoundTripTime1 OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The round trip time between the first probe packet
transmitted and the reponse ICMP packet received."
::= { snRtIpTraceRouteResultEntry 3 }
snRtIpTraceRouteResultRoundTripTime2 OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The round trip time between the second probe packet
transmitted and the reponse ICMP packet received."
::= { snRtIpTraceRouteResultEntry 4 }
-- IP forwarding cache table
snRtIpFwdCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpFwdCacheEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP forwarding cache table."
::= { snIp 11 }
snRtIpFwdCacheEntry OBJECT-TYPE
SYNTAX SnRtIpFwdCacheEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP forwarding cache table."
INDEX { snRtIpFwdCacheIndex }
::= { snRtIpFwdCacheTable 1 }
SnRtIpFwdCacheEntry ::= SEQUENCE {
snRtIpFwdCacheIndex
INTEGER,
snRtIpFwdCacheIp
IpAddress,
snRtIpFwdCacheMac
OCTET STRING,
snRtIpFwdCacheNextHopIp
IpAddress,
snRtIpFwdCacheOutgoingPort
INTEGER,
snRtIpFwdCacheType
INTEGER,
snRtIpFwdCacheAction
INTEGER,
snRtIpFwdCacheFragCheck
INTEGER,
snRtIpFwdCacheSnapHdr
INTEGER,
snRtIpFwdCacheVLanId
INTEGER
}
snRtIpFwdCacheIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a ip forwarding cache table entry."
::= { snRtIpFwdCacheEntry 1 }
snRtIpFwdCacheIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of a station."
::= { snRtIpFwdCacheEntry 2 }
snRtIpFwdCacheMac OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Mac address of an IP station."
::= { snRtIpFwdCacheEntry 3 }
snRtIpFwdCacheNextHopIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The next hop router IP address."
::= { snRtIpFwdCacheEntry 4 }
snRtIpFwdCacheOutgoingPort OBJECT-TYPE
SYNTAX INTEGER (0..3900)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The outgoing port of which packets will forward to.
Return port value of zero to indicate no outgoing port
associated to this entry. Non-zero value has the
following meanings:
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number.
For virtual router interface, slot number is 15,
port number is the virtual router port from 1 to 60."
::= { snRtIpFwdCacheEntry 5 }
snRtIpFwdCacheType OBJECT-TYPE
SYNTAX INTEGER { dynamic(1), permanent(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 'dynamic' or 'permanent' type for a ip forwarding
cache table entry."
::= { snRtIpFwdCacheEntry 6 }
snRtIpFwdCacheAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
forward(2),
forUs(3),
waitForArp(4),
complexFilter(5),
icmpDeny(6),
dropPacket(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The action to take."
::= { snRtIpFwdCacheEntry 7 }
snRtIpFwdCacheFragCheck OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Check for fragmentation."
::= { snRtIpFwdCacheEntry 8 }
snRtIpFwdCacheSnapHdr OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Apply SNAP encapsulation."
::= { snRtIpFwdCacheEntry 9 }
snRtIpFwdCacheVLanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VLAN ID for a ip forwarding cache table entry.
Return VLAN ID value of zero to indicate no VLAN
associated to this entry."
::= { snRtIpFwdCacheEntry 10 }
-- Ip AS-Path Access List table
snIpAsPathAccessListTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpAsPathAccessListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ip As-Path Access List table."
::= { snIp 12 }
snIpAsPathAccessListEntry OBJECT-TYPE
SYNTAX SnIpAsPathAccessListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Ip As-Path Access List table."
INDEX { snIpAsPathAccessListIndex, snIpAsPathAccessListSequence}
::= { snIpAsPathAccessListTable 1 }
SnIpAsPathAccessListEntry ::= SEQUENCE {
snIpAsPathAccessListIndex
INTEGER,
snIpAsPathAccessListSequence
INTEGER,
snIpAsPathAccessListAction
INTEGER,
snIpAsPathAccessListRegExpression
OCTET STRING,
snIpAsPathAccessListRowStatus
INTEGER
}
snIpAsPathAccessListIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a filter entry."
::= { snIpAsPathAccessListEntry 1 }
snIpAsPathAccessListSequence OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table sequence index for a filter entry."
::= { snIpAsPathAccessListEntry 2 }
snIpAsPathAccessListAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the bgp address match
with this filter."
::= { snIpAsPathAccessListEntry 3 }
snIpAsPathAccessListRegExpression OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Autonomous system in the filter using a regular expression.
Each character of the regular expression string is represented
by one octet."
::= { snIpAsPathAccessListEntry 4 }
snIpAsPathAccessListRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpAsPathAccessListEntry 5 }
-- Ip Community List table
snIpCommunityListTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpCommunityListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ip Community List table."
::= { snIp 13 }
snIpCommunityListEntry OBJECT-TYPE
SYNTAX SnIpCommunityListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Ip Community List table."
INDEX { snIpCommunityListIndex, snIpCommunityListSequence}
::= { snIpCommunityListTable 1 }
SnIpCommunityListEntry ::= SEQUENCE {
snIpCommunityListIndex
INTEGER,
snIpCommunityListSequence
INTEGER,
snIpCommunityListAction
INTEGER,
snIpCommunityListCommNum
OCTET STRING,
snIpCommunityListInternet
INTEGER,
snIpCommunityListNoAdvertise
INTEGER,
snIpCommunityListNoExport
INTEGER,
snIpCommunityListRowStatus
INTEGER,
snIpCommunityListLocalAs
INTEGER
}
snIpCommunityListIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a filter entry."
::= { snIpCommunityListEntry 1 }
snIpCommunityListSequence OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table sequence index for a filter entry."
::= { snIpCommunityListEntry 2 }
snIpCommunityListAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the bgp address match
with this filter."
::= { snIpCommunityListEntry 3 }
snIpCommunityListCommNum OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFFFFFF. There are 20 of them.
This integer number is represented by 4 OCTETs."
::= { snIpCommunityListEntry 4 }
snIpCommunityListInternet OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disabled/Enabled the Internet Community."
::= { snIpCommunityListEntry 5 }
snIpCommunityListNoAdvertise OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Do not advertise this route to any peer (internal or external)."
::= { snIpCommunityListEntry 6 }
snIpCommunityListNoExport OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Do not advertise this route to an EBGP peer."
::= { snIpCommunityListEntry 7 }
snIpCommunityListRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpCommunityListEntry 8 }
snIpCommunityListLocalAs OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Send this route to peers in other sub-autonomous systems within
the local confederation. Do not advertise this route to an
external system."
::= { snIpCommunityListEntry 9 }
-- Ip Prefix List table
snIpPrefixListTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpPrefixListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ip Prefix List table."
::= { snIp 14 }
snIpPrefixListEntry OBJECT-TYPE
SYNTAX SnIpPrefixListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Ip As-Path Access List table."
INDEX { snIpPrefixListName, snIpPrefixListSequence}
::= { snIpPrefixListTable 1 }
SnIpPrefixListEntry ::= SEQUENCE {
snIpPrefixListName
OCTET STRING,
snIpPrefixListSequence
INTEGER,
snIpPrefixListDesc
OCTET STRING,
snIpPrefixListAction
INTEGER,
snIpPrefixListAddr
IpAddress,
snIpPrefixListMask
IpAddress,
snIpPrefixListGeValue
INTEGER,
snIpPrefixListLeValue
INTEGER,
snIpPrefixListRowStatus
INTEGER
}
snIpPrefixListName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An octet string of the ip prefix list name, each character of the name
is represented by one octet."
::= { snIpPrefixListEntry 1 }
snIpPrefixListSequence OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table sequence index for a filter entry."
::= { snIpPrefixListEntry 2 }
snIpPrefixListDesc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An octet string of the ip prefix list description, each character of the name
is represented by one octet."
::= { snIpPrefixListEntry 3 }
snIpPrefixListAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the ip prefix match
with this filter."
::= { snIpPrefixListEntry 4 }
snIpPrefixListAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Prefix IP address."
::= { snIpPrefixListEntry 5 }
snIpPrefixListMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Prefix IP mask."
::= { snIpPrefixListEntry 6 }
snIpPrefixListGeValue OBJECT-TYPE
SYNTAX INTEGER (0..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Greater than value."
::= { snIpPrefixListEntry 7 }
snIpPrefixListLeValue OBJECT-TYPE
SYNTAX INTEGER (0..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Less than value."
::= { snIpPrefixListEntry 8 }
snIpPrefixListRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpPrefixListEntry 9 }
-- ################################ new 2 tables ###################################
-- Ip AS-Path Access List table
snIpAsPathAccessListStringTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpAsPathAccessListStringEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ip As-Path Access List table, string version."
::= { snIp 16 }
snIpAsPathAccessListStringEntry OBJECT-TYPE
SYNTAX SnIpAsPathAccessListStringEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Ip As-Path Access List table."
INDEX { snIpAsPathAccessListStringName, snIpAsPathAccessListStringSequence}
::= { snIpAsPathAccessListStringTable 1 }
SnIpAsPathAccessListStringEntry ::= SEQUENCE {
snIpAsPathAccessListStringName
DisplayString,
snIpAsPathAccessListStringSequence
INTEGER,
snIpAsPathAccessListStringAction
INTEGER,
snIpAsPathAccessListStringRegExpression
DisplayString,
snIpAsPathAccessListStringRowStatus
INTEGER
}
snIpAsPathAccessListStringName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a filter entry, string version."
::= { snIpAsPathAccessListStringEntry 1 }
snIpAsPathAccessListStringSequence OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table sequence index for a filter entry."
::= { snIpAsPathAccessListStringEntry 2 }
snIpAsPathAccessListStringAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the bgp address match
with this filter."
::= { snIpAsPathAccessListStringEntry 3 }
snIpAsPathAccessListStringRegExpression OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..256))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Autonomous system in the filter using a regular expression.
Each character of the regular expression string is represented
by one octet."
::= { snIpAsPathAccessListStringEntry 4 }
snIpAsPathAccessListStringRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpAsPathAccessListStringEntry 5 }
-- Ip Community ListString table
snIpCommunityListStringTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIpCommunityListStringEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Ip Community ListString table, string version."
::= { snIp 17 }
snIpCommunityListStringEntry OBJECT-TYPE
SYNTAX SnIpCommunityListStringEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Ip Community ListString table."
INDEX { snIpCommunityListStringName, snIpCommunityListStringSequence}
::= { snIpCommunityListStringTable 1 }
SnIpCommunityListStringEntry ::= SEQUENCE {
snIpCommunityListStringName
DisplayString,
snIpCommunityListStringSequence
INTEGER,
snIpCommunityListStringAction
INTEGER,
snIpCommunityListStringCommNum
OCTET STRING,
snIpCommunityListStringInternet
INTEGER,
snIpCommunityListStringNoAdvertise
INTEGER,
snIpCommunityListStringNoExport
INTEGER,
snIpCommunityListStringRowStatus
INTEGER,
snIpCommunityListStringLocalAs
INTEGER
}
snIpCommunityListStringName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a filter entry."
::= { snIpCommunityListStringEntry 1 }
snIpCommunityListStringSequence OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table sequence index for a filter entry."
::= { snIpCommunityListStringEntry 2 }
snIpCommunityListStringAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the bgp address match
with this filter."
::= { snIpCommunityListStringEntry 3 }
snIpCommunityListStringCommNum OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFFFFFF. There are 20 of them.
This integer number is represented by 4 OCTETs."
::= { snIpCommunityListStringEntry 4 }
snIpCommunityListStringInternet OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disabled/Enabled the Internet Community."
::= { snIpCommunityListStringEntry 5 }
snIpCommunityListStringNoAdvertise OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Do not advertise this route to any peer (internal or external)."
::= { snIpCommunityListStringEntry 6 }
snIpCommunityListStringNoExport OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Do not advertise this route to an EBGP peer."
::= { snIpCommunityListStringEntry 7 }
snIpCommunityListStringRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snIpCommunityListStringEntry 8 }
snIpCommunityListStringLocalAs OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Send this route to peers in other sub-autonomous systems within
the local confederation. Do not advertise this route to an
external system."
::= { snIpCommunityListStringEntry 9 }
-- SECTION 2: MIB
-- Router IP RIP MIB
snRtIpRipGeneral OBJECT IDENTIFIER ::= { snRip 1 }
-- IP RIP general group
snRtIpRipEnable OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable ip rip routing."
::= { snRtIpRipGeneral 1 }
snRtIpRipUpdateTime OBJECT-TYPE
SYNTAX INTEGER (1..1000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ip rip update interval in seconds."
::= { snRtIpRipGeneral 2 }
snRtIpRipRedisEnable OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable redistribution to rip."
::= { snRtIpRipGeneral 3 }
snRtIpRipRedisDefMetric OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Default metric to be used when redistribute route to rip."
::= { snRtIpRipGeneral 4 }
snRtIpRipSetAllPortConfig OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is an index number of a
snRtIpRipPortConfigTable row (i.e. snRtIpRipPortConfigPortIndex),
which is the selected row to copy all of its read-writable data
(i.e. snRtIpRipPortVersion and snRtIpRipPortPoisonReverse) to the
rest of the rows in snRtIpRipPortConfigTable.
Note: prior setting this object, all the intended data of the
given row of the table must be set. Otherwise, the current data
of the row will be used to set the entire ip rip port configuration
table. The previous setting will be overwritten by the new one."
::= { snRtIpRipGeneral 5 }
snRtIpRipGblFiltList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An ip rip global filter list, of which each octet contains a
filter ID number that forms a group of filters. A valid entry
in the snRtIpRipRouteFilterTable with the corresponding filter
ID number (i.e. snRtIpRipRouteFilterId) must have been created
before a filter list is initialized."
::= { snRtIpRipGeneral 6 }
snRtIpRipFiltOnAllPort OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
deleteAllInBound(2),
deleteAllOutBound(3),
addAllInBound(4),
addAllOutBound(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Apply the ip rip global filter list snRtIpRipGblFiltList to
all interfaces. This object is used to add all rip filter
lists and delete all rip filter lists to/from all interfaces.
Prior to sending this command, snRtIpRipGblFiltList must have
been set to a proper filter list.
The values that can be written are:
deleteAllInBound(2)...delete all in-bound filter lists from all ports.
deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
addAllInBound(4)......add all in-bound filter lists to all ports.
addAllOutBound(5).....add all out-bound filter lists to all ports.
If set operation failed, then a SET with value of (2) or (3)
returns error code 'GenError'. If succeed, entries in the
filter list are deleted immediately.
The following values can be returned on reads:
valid(1)....set operation is done and is valid."
::= { snRtIpRipGeneral 7 }
snRtIpRipDistance OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Administration distance."
::= { snRtIpRipGeneral 8 }
-- IP RIP port configuration table
-- this table was replaced by the snRtIpRipPortIfConfigTable,
-- of which the index was changed to ifIndex, not another
-- indexing method used by this table
snRtIpRipPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpRipPortConfigEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"IP Rip port Config table."
::= { snRip 2 }
snRtIpRipPortConfigEntry OBJECT-TYPE
SYNTAX SnRtIpRipPortConfigEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry in the IP Rip Port Config table."
INDEX { snRtIpRipPortConfigPortIndex }
::= { snRtIpRipPortConfigTable 1 }
SnRtIpRipPortConfigEntry ::= SEQUENCE {
snRtIpRipPortConfigPortIndex
PortIndex,
snRtIpRipPortVersion
INTEGER,
snRtIpRipPortPoisonReverse
RtrStatus,
snRtIpRipPortLearnDefault
INTEGER
}
snRtIpRipPortConfigPortIndex OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The port index for ip rip port config entry."
::= { snRtIpRipPortConfigEntry 1 }
snRtIpRipPortVersion OBJECT-TYPE
SYNTAX INTEGER { disabled(0), v1Only(1), v2Only(2), v1CompatibleV2(3) }
ACCESS read-write
STATUS deprecated
DESCRIPTION
"The ip rip version on this port."
::= { snRtIpRipPortConfigEntry 2 }
snRtIpRipPortPoisonReverse OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Enable/disable poison reverse."
::= { snRtIpRipPortConfigEntry 3 }
snRtIpRipPortLearnDefault OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Apply the RIP router protocol learn-default option to the
interface. The values that can be written are:
disabled(0)...deleted the learn default option.
enabled(1)....enabled the learn default option."
::= { snRtIpRipPortConfigEntry 4 }
-- redistribution table
snRtIpRipRedisTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpRipRedisEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP Rip Redistribution table."
::= { snRip 3 }
snRtIpRipRedisEntry OBJECT-TYPE
SYNTAX SnRtIpRipRedisEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP Rip Redistribution table."
INDEX { snRtIpRipRedisIndex }
::= { snRtIpRipRedisTable 1 }
SnRtIpRipRedisEntry ::= SEQUENCE {
snRtIpRipRedisIndex
INTEGER,
snRtIpRipRedisAction
Action,
snRtIpRipRedisProtocol
INTEGER,
snRtIpRipRedisIp
IpAddress,
snRtIpRipRedisMask
IpAddress,
snRtIpRipRedisMatchMetric
Metric,
snRtIpRipRedisSetMetric
INTEGER,
snRtIpRipRedisRowStatus
RowSts
}
snRtIpRipRedisIndex OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a IP Rip Redistribution entry."
::= { snRtIpRipRedisEntry 1 }
snRtIpRipRedisAction OBJECT-TYPE
SYNTAX Action
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The action to take when match this
IP Rip Redistribution entry."
::= { snRtIpRipRedisEntry 2 }
snRtIpRipRedisProtocol OBJECT-TYPE
SYNTAX INTEGER { other(1), all(2), static(3), ospf(4), bgp(5), isis(6) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The protocol to be distributed. other(1) cannot be
used for SNMP-SET."
::= { snRtIpRipRedisEntry 3 }
snRtIpRipRedisIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ip address of the ip route to be distributed.
0.0.0.0 - all routes"
::= { snRtIpRipRedisEntry 4 }
snRtIpRipRedisMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ip subnet mask of the ip route to be distributed."
::= { snRtIpRipRedisEntry 5 }
snRtIpRipRedisMatchMetric OBJECT-TYPE
SYNTAX Metric
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The metric of the route to be matched
to determine the redistribution.
0 - any metric value"
::= { snRtIpRipRedisEntry 6 }
snRtIpRipRedisSetMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The new metric of the route to be advertised.
0 - use the default metric."
::= { snRtIpRipRedisEntry 7 }
snRtIpRipRedisRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a Redistribution entry."
::= { snRtIpRipRedisEntry 8 }
-- IP RIP route filter table
snRtIpRipRouteFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpRipRouteFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"ip rip route filter table."
::= { snRip 4 }
snRtIpRipRouteFilterEntry OBJECT-TYPE
SYNTAX SnRtIpRipRouteFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the ip rip route filter table."
INDEX { snRtIpRipRouteFilterId }
::= { snRtIpRipRouteFilterTable 1 }
SnRtIpRipRouteFilterEntry ::= SEQUENCE {
snRtIpRipRouteFilterId
INTEGER,
snRtIpRipRouteFilterAction
Action,
snRtIpRipRouteFilterIpAddr
IpAddress,
snRtIpRipRouteFilterSubnetMask
IpAddress,
snRtIpRipRouteFilterRowStatus
INTEGER
}
snRtIpRipRouteFilterId OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The filter ID to identify a filter entry."
::= { snRtIpRipRouteFilterEntry 1 }
snRtIpRipRouteFilterAction OBJECT-TYPE
SYNTAX Action
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the ip rip packet matched
with this filter."
::= { snRtIpRipRouteFilterEntry 2 }
snRtIpRipRouteFilterIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Route IP address to compare with any route IP addresses
in a ip rip packet. IP address 0.0.0.0 always compare
equals to any route IP addresses in any ip rip packets."
::= { snRtIpRipRouteFilterEntry 3 }
snRtIpRipRouteFilterSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Subnet mask to apply to the route IP address in a ip rip
packet, the result is compared to snRtIpRipRouteFilterIpAddr.
If snRtIpRipRouteFilterIpAddr is 0.0.0.0, this subnet mask
value is ignored."
::= { snRtIpRipRouteFilterEntry 4 }
snRtIpRipRouteFilterRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative.
valid(2).....the row exists and is valid"
::= { snRtIpRipRouteFilterEntry 5 }
-- IP RIP neighbor filter table
snRtIpRipNbrFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpRipNbrFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"ip rip neighbor filter table."
::= { snRip 5 }
snRtIpRipNbrFilterEntry OBJECT-TYPE
SYNTAX SnRtIpRipNbrFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the ip rip neighbor filter table."
INDEX { snRtIpRipNbrFilterId }
::= { snRtIpRipNbrFilterTable 1 }
SnRtIpRipNbrFilterEntry ::= SEQUENCE {
snRtIpRipNbrFilterId
INTEGER,
snRtIpRipNbrFilterAction
Action,
snRtIpRipNbrFilterSourceIp
IpAddress,
snRtIpRipNbrFilterRowStatus
INTEGER
}
snRtIpRipNbrFilterId OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The filter ID to identify a filter entry."
::= { snRtIpRipNbrFilterEntry 1 }
snRtIpRipNbrFilterAction OBJECT-TYPE
SYNTAX Action
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the ip rip packet source IP
address compares equal to the source IP address
in this filter."
::= { snRtIpRipNbrFilterEntry 2 }
snRtIpRipNbrFilterSourceIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source IP address to compare with the source IP
address in a ip rip packet. IP address 0.0.0.0
always compares equal to any source IP addresses
in any ip rip packets."
::= { snRtIpRipNbrFilterEntry 3 }
snRtIpRipNbrFilterRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative.
valid(2).....the row exists and is valid"
::= { snRtIpRipNbrFilterEntry 4 }
-- IP RIP port access table
-- this table was replaced by the snRtIpRipPortIfAccessTable,
-- of which the index was changed to ifIndex, not another
-- indexing method used by this table
snRtIpRipPortAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpRipPortAccessEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"ip interface rip access table."
::= { snRip 6 }
snRtIpRipPortAccessEntry OBJECT-TYPE
SYNTAX SnRtIpRipPortAccessEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry of the ip interface rip access table."
INDEX { snRtIpRipPortAccessPort, snRtIpRipPortAccessDir }
::= { snRtIpRipPortAccessTable 1 }
SnRtIpRipPortAccessEntry ::= SEQUENCE {
snRtIpRipPortAccessPort
PortIndex,
snRtIpRipPortAccessDir
INTEGER,
snRtIpRipPortAccessFilterList
OCTET STRING,
snRtIpRipPortAccessRowStatus
INTEGER
}
snRtIpRipPortAccessPort OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The ip interface to which the rip filter applies."
::= { snRtIpRipPortAccessEntry 1 }
snRtIpRipPortAccessDir OBJECT-TYPE
SYNTAX INTEGER { in(1), out(2) }
ACCESS read-only
STATUS deprecated
DESCRIPTION
"The access direction of incoming packet filter
or outgoing packet filter."
::= { snRtIpRipPortAccessEntry 2 }
snRtIpRipPortAccessFilterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..64))
ACCESS read-write
STATUS deprecated
DESCRIPTION
"An ip rip filter list, of which each octet contains
a filter ID number that forms a group of filters. A
valid entry in the snRtIpRipRouteFilterTable with the
corresponding filter ID number (i.e. snRtIpRipRouteFilterId)
must have been created before a filter list is initialized."
::= { snRtIpRipPortAccessEntry 3 }
snRtIpRipPortAccessRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative.
valid(2).....the row exists and is valid"
::= { snRtIpRipPortAccessEntry 4 }
-- IP RIP port configuration table, PortIndex is changed to ifIndex
snRtIpRipPortIfConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpRipPortIfConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IP Rip port If Config table."
::= { snRip 7 }
snRtIpRipPortIfConfigEntry OBJECT-TYPE
SYNTAX SnRtIpRipPortIfConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP Rip Port If Config table."
INDEX { snRtIpRipPortIfConfigInterfaceIndex }
::= { snRtIpRipPortIfConfigTable 1 }
SnRtIpRipPortIfConfigEntry ::= SEQUENCE {
snRtIpRipPortIfConfigInterfaceIndex
InterfaceIndex,
snRtIpRipPortIfVersion
INTEGER,
snRtIpRipPortIfPoisonReverse
RtrStatus,
snRtIpRipPortIfLearnDefault
INTEGER
}
snRtIpRipPortIfConfigInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The If index for ip rip port config entry."
::= { snRtIpRipPortIfConfigEntry 1 }
snRtIpRipPortIfVersion OBJECT-TYPE
SYNTAX INTEGER { disabled(0), v1Only(1), v2Only(2), v1CompatibleV2(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ip rip version on this port."
::= { snRtIpRipPortIfConfigEntry 2 }
snRtIpRipPortIfPoisonReverse OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable poison reverse."
::= { snRtIpRipPortIfConfigEntry 3 }
snRtIpRipPortIfLearnDefault OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Apply the RIP router protocol learn-default option to the
interface. The values that can be written are:
disabled(0)...deleted the learn default option.
enabled(1)....enabled the learn default option."
::= { snRtIpRipPortIfConfigEntry 4 }
-- IP RIP port access table, PortIndex is changed to ifIndex
snRtIpRipPortIfAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtIpRipPortIfAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"ip interface rip access table."
::= { snRip 8 }
snRtIpRipPortIfAccessEntry OBJECT-TYPE
SYNTAX SnRtIpRipPortIfAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the ip interface rip access table."
INDEX { snRtIpRipPortIfAccessPort, snRtIpRipPortIfAccessDir }
::= { snRtIpRipPortIfAccessTable 1 }
SnRtIpRipPortIfAccessEntry ::= SEQUENCE {
snRtIpRipPortIfAccessPort
InterfaceIndex,
snRtIpRipPortIfAccessDir
INTEGER,
snRtIpRipPortIfAccessFilterList
OCTET STRING,
snRtIpRipPortIfAccessRowStatus
INTEGER
}
snRtIpRipPortIfAccessPort OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ip interface to which the rip filter applies."
::= { snRtIpRipPortIfAccessEntry 1 }
snRtIpRipPortIfAccessDir OBJECT-TYPE
SYNTAX INTEGER { in(1), out(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The access direction of incoming packet filter
or outgoing packet filter."
::= { snRtIpRipPortIfAccessEntry 2 }
snRtIpRipPortIfAccessFilterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An ip rip filter list, of which each octet contains
a filter ID number that forms a group of filters. A
valid entry in the snRtIpRipRouteFilterTable with the
corresponding filter ID number (i.e. snRtIpRipRouteFilterId)
must have been created before a filter list is initialized."
::= { snRtIpRipPortIfAccessEntry 3 }
snRtIpRipPortIfAccessRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative.
valid(2).....the row exists and is valid"
::= { snRtIpRipPortIfAccessEntry 4 }
-- DVMRP MIB
snDvmrpMIBObjects OBJECT IDENTIFIER ::= { snDvmrp 1 }
snDvmrpVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The router's DVMRP version information."
::= { snDvmrpMIBObjects 1 }
snDvmrpEnable OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable DVMRP on this router."
DEFVAL { disabled }
::= { snDvmrpMIBObjects 2 }
snDvmrpGenerationId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The generation identifier for the routing process. This is
used by neighboring routers to detect whether pruning
information should be resent."
::= { snDvmrpMIBObjects 3 }
snDvmrpProbeInterval OBJECT-TYPE
SYNTAX INTEGER (5..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the time interval at which the router sends out
probe messages to discover neighbour routers. Value is
in number of seconds. snDvmrpEnable must be 'enabled'
before this object is writen."
DEFVAL { 10 }
::= { snDvmrpMIBObjects 4 }
snDvmrpReportInterval OBJECT-TYPE
SYNTAX INTEGER (10..2000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the time interval at which the router sends out
full report messages. Value is in number of seconds.
snDvmrpEnable must be 'enabled' before this object is
writen."
DEFVAL { 60 }
::= { snDvmrpMIBObjects 5 }
snDvmrpTriggerInterval OBJECT-TYPE
SYNTAX INTEGER (5..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the time interval at which triggered updates are
sent out. Value is in number of seconds. snDvmrpEnable must
be 'enabled' before this object is writen."
DEFVAL { 5 }
::= { snDvmrpMIBObjects 6 }
snDvmrpNeighborRouterTimeout OBJECT-TYPE
SYNTAX INTEGER (60..8000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the time interval after which the neighbour router
is considered down. Value is in number of seconds. snDvmrpEnable
must be 'enabled' before this object is writen."
DEFVAL { 180 }
::= { snDvmrpMIBObjects 7 }
snDvmrpRouteExpireTime OBJECT-TYPE
SYNTAX INTEGER (20..4000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the time interval after which the route expires
and becomes unreachable. Value is in number of seconds.
snDvmrpEnable must be 'enabled' before this object is writen."
DEFVAL { 200 }
::= { snDvmrpMIBObjects 8 }
snDvmrpRouteDiscardTime OBJECT-TYPE
SYNTAX INTEGER (40..8000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the time interval after which a route is discarded
from the route table. Value is in number of seconds.
snDvmrpEnable must be 'enabled' before this object is writen."
DEFVAL { 340 }
::= { snDvmrpMIBObjects 9 }
snDvmrpPruneAge OBJECT-TYPE
SYNTAX INTEGER (20..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the duration of time for which the prune state
is stored. Value is in number of seconds. snDvmrpEnable
must be 'enabled' before this object is writen."
DEFVAL { 180 }
::= { snDvmrpMIBObjects 10 }
snDvmrpGraftRetransmitTime OBJECT-TYPE
SYNTAX INTEGER (5..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the time interval after which a graft message will
be retransmitted if graft acknowledge message has not been
received. Value is in number of seconds. snDvmrpEnable must
be 'enabled' before this object is writen."
DEFVAL { 10 }
::= { snDvmrpMIBObjects 11 }
snDvmrpDefaultRoute OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the IP address of a router that is connected to one
of the directly attached subnet. If a multicast route is not
present on the local router, this default route will be used
for multicast forwarding. snDvmrpEnable must be 'enabled'
before this object is writen."
::= { snDvmrpMIBObjects 12 }
-- The DVMRP Virtual Interface Table
snDvmrpVInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnDvmrpVInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the router's DVMRP virtual
interfaces. snDvmrpEnable must be 'enabled' before this
table is read or writen."
::= { snDvmrpMIBObjects 13 }
snDvmrpVInterfaceEntry OBJECT-TYPE
SYNTAX SnDvmrpVInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the snDvmrpVInterfaceTable.
This row augments ipMRouteInterfaceEntry in the IP
Multicast MIB, where the threshold object resides."
INDEX { snDvmrpVInterfaceVifIndex }
::= { snDvmrpVInterfaceTable 1 }
SnDvmrpVInterfaceEntry ::= SEQUENCE {
snDvmrpVInterfaceVifIndex INTEGER,
snDvmrpVInterfaceType INTEGER,
snDvmrpVInterfaceOperState INTEGER,
snDvmrpVInterfaceLocalAddress IpAddress,
snDvmrpVInterfaceRemoteAddress IpAddress,
snDvmrpVInterfaceRemoteSubnetMask IpAddress,
snDvmrpVInterfaceMetric INTEGER,
snDvmrpVInterfaceTtlThreshold INTEGER,
snDvmrpVInterfaceAdvertiseLocal RtrStatus,
snDvmrpVInterfaceEncapsulation RtrStatus,
snDvmrpVInterfaceStatus INTEGER }
snDvmrpVInterfaceVifIndex OBJECT-TYPE
SYNTAX INTEGER (1..48)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ifIndex value of this DVMRP virtual interface."
::= { snDvmrpVInterfaceEntry 1 }
snDvmrpVInterfaceType OBJECT-TYPE
SYNTAX INTEGER { tunnel(1), querier(2), subnet(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of this DVMRP virtual interface, whether it uses
a tunnel, a physical interface for which we are a querier,
or a physical interface for which we are not a querier.
For write operation, this object can only accept tunnel(1)
to configure a tunnel interface or subnet(3) to configure
a physical interface."
::= { snDvmrpVInterfaceEntry 2 }
snDvmrpVInterfaceOperState OBJECT-TYPE
SYNTAX INTEGER { up(1), down(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current operational state of this DVMRP virtual
interface."
::= { snDvmrpVInterfaceEntry 3 }
snDvmrpVInterfaceLocalAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of the local end of this DVMRP virtual
interface."
::= { snDvmrpVInterfaceEntry 4 }
snDvmrpVInterfaceRemoteAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of the remote end of this DVMRP virtual
interface. For a tunnel, this is the IP address of the
neighboring router. For a subnet, this is the subnet
address."
::= { snDvmrpVInterfaceEntry 5 }
snDvmrpVInterfaceRemoteSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The subnet mask for a directly connected subnet. For
a tunnel, this should be 0.0.0.0."
::= { snDvmrpVInterfaceEntry 6 }
snDvmrpVInterfaceMetric OBJECT-TYPE
SYNTAX INTEGER (1..31)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The distance metric for this DVMRP virtual interface which
is used to calculate distance vectors."
DEFVAL { 1 }
::= { snDvmrpVInterfaceEntry 7 }
snDvmrpVInterfaceTtlThreshold OBJECT-TYPE
SYNTAX INTEGER (1..254)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the minimum time-to-live value to forward the packets
out of this virtual interface."
DEFVAL { 1 }
::= { snDvmrpVInterfaceEntry 8 }
snDvmrpVInterfaceAdvertiseLocal OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable the advertising of this local route."
DEFVAL { enabled }
::= { snDvmrpVInterfaceEntry 9 }
snDvmrpVInterfaceEncapsulation OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable the encapsulation of the DVMRP control
packets when using IPINIP encapsulation."
DEFVAL { disabled }
::= { snDvmrpVInterfaceEntry 10 }
snDvmrpVInterfaceStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative.
valid(2)....Setting it to 'valid' has the effect of
changing the row to operative."
::= { snDvmrpVInterfaceEntry 11 }
-- The DVMRP Neighbor Table
snDvmrpNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnDvmrpNeighborEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the router's DVMRP
neighbors, as discovered by receiving Neighbor Probe
messages. snDvmrpEnable must be 'enabled' before this
table is read."
::= { snDvmrpMIBObjects 14 }
snDvmrpNeighborEntry OBJECT-TYPE
SYNTAX SnDvmrpNeighborEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the snDvmrpNeighborTable."
INDEX { snDvmrpNeighborEntryIndex }
::= { snDvmrpNeighborTable 1 }
SnDvmrpNeighborEntry ::= SEQUENCE {
snDvmrpNeighborEntryIndex INTEGER,
snDvmrpNeighborVifIndex INTEGER,
snDvmrpNeighborAddress IpAddress,
snDvmrpNeighborUpTime TimeTicks,
snDvmrpNeighborExpiryTime TimeTicks,
snDvmrpNeighborGenerationId INTEGER,
snDvmrpNeighborMajorVersion INTEGER,
snDvmrpNeighborMinorVersion INTEGER,
snDvmrpNeighborCapabilities INTEGER }
snDvmrpNeighborEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table entry index."
::= { snDvmrpNeighborEntry 1 }
snDvmrpNeighborVifIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of VifIndex for the virtual interface used to
reach this DVMRP neighbor."
::= { snDvmrpNeighborEntry 2 }
snDvmrpNeighborAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the DVMRP neighbor for which this entry
contains information."
::= { snDvmrpNeighborEntry 3 }
snDvmrpNeighborUpTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time since this DVMRP neighbor (last) became a neighbor
of the local router."
::= { snDvmrpNeighborEntry 4 }
snDvmrpNeighborExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum time remaining before this DVMRP neighbor will
be aged out."
::= { snDvmrpNeighborEntry 5 }
snDvmrpNeighborGenerationId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The neighboring router's generation identifier."
::= { snDvmrpNeighborEntry 6 }
snDvmrpNeighborMajorVersion OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The neighboring router's major DVMRP version number."
::= { snDvmrpNeighborEntry 7 }
snDvmrpNeighborMinorVersion OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The neighboring router's minor DVMRP version number."
::= { snDvmrpNeighborEntry 8 }
snDvmrpNeighborCapabilities OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object describes the neighboring router's
capabilities. The following shows the position
of each bit:
bit position meaning
----------- ------
3 mtrace bit
2 generationID bit
1 prune bit
0 leaf bit
The leaf bit indicates that the neighbor has only
one interface with neighbors. The prune bit indicates
that the neighbor supports pruning. The generationID bit
indicates that the neighbor sends its generationID in Probe
messages. The mtrace bit indicates that the neighbor can
handle mtrace requests."
::= { snDvmrpNeighborEntry 9 }
-- The DVMRP Route Table
snDvmrpRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnDvmrpRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The routing table used by DVMRP in place of the unicast
routing table. snDvmrpEnable must be 'enabled' before this
table is read."
::= { snDvmrpMIBObjects 15 }
snDvmrpRouteEntry OBJECT-TYPE
SYNTAX SnDvmrpRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) containing the multicast routing
information used by DVMRP in place of the unicast routing
information."
INDEX { snDvmrpRouteEntryIndex }
::= { snDvmrpRouteTable 1 }
SnDvmrpRouteEntry ::= SEQUENCE {
snDvmrpRouteEntryIndex INTEGER,
snDvmrpRouteSource IpAddress,
snDvmrpRouteSourceMask IpAddress,
snDvmrpRouteUpstreamNeighbor IpAddress,
snDvmrpRouteVifIndex INTEGER,
snDvmrpRouteMetric INTEGER,
snDvmrpRouteExpiryTime TimeTicks }
snDvmrpRouteEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table entry index."
::= { snDvmrpRouteEntry 1 }
snDvmrpRouteSource OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The network address which when combined with the
corresponding value of snDvmrpRouteSourceMask identifies the
sources for which this entry contains multicast routing
information."
::= { snDvmrpRouteEntry 2 }
snDvmrpRouteSourceMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The network mask which when combined with the corresponding
value of snDvmrpRouteSource identifies the sources for which
this entry contains multicast routing information."
::= { snDvmrpRouteEntry 3 }
snDvmrpRouteUpstreamNeighbor OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The address of the upstream neighbor (e.g., RPF neighbor)
from which IP datagrams from these sources are received."
::= { snDvmrpRouteEntry 4 }
snDvmrpRouteVifIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of snDvmrpVInterfaceVifIndex for the virtual
interface on which IP datagrams sent by these sources are
received."
::= { snDvmrpRouteEntry 5 }
snDvmrpRouteMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The distance in hops to the source subnet."
::= { snDvmrpRouteEntry 6 }
snDvmrpRouteExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum amount of time remaining before this entry will
be aged out."
::= { snDvmrpRouteEntry 7 }
-- The DVMRP Routing Next Hop Table
snDvmrpRouteNextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnDvmrpRouteNextHopEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table containing information on the next
hops on outgoing interfaces for routing IP multicast
datagrams. snDvmrpEnable must be 'enabled' before this
table is read."
::= { snDvmrpMIBObjects 16 }
snDvmrpRouteNextHopEntry OBJECT-TYPE
SYNTAX SnDvmrpRouteNextHopEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the list of next hops on
outgoing interfaces to which IP multicast datagrams from
particular sources are routed."
INDEX { snDvmrpRouteNextHopSource, snDvmrpRouteNextHopSourceMask,
snDvmrpRouteNextHopVifIndex }
::= { snDvmrpRouteNextHopTable 1 }
SnDvmrpRouteNextHopEntry ::= SEQUENCE {
snDvmrpRouteNextHopSource IpAddress,
snDvmrpRouteNextHopSourceMask IpAddress,
snDvmrpRouteNextHopVifIndex INTEGER,
snDvmrpRouteNextHopType INTEGER }
snDvmrpRouteNextHopSource OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The network address which when combined with the
corresponding value of snDvmrpRouteNextHopSourceMask
identifies the sources for which this entry specifies
a next hop on an outgoing interface."
::= { snDvmrpRouteNextHopEntry 1 }
snDvmrpRouteNextHopSourceMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The network mask which when combined with the corresponding
value of snDvmrpRouteNextHopSource identifies the sources for
which this entry specifies a next hop on an outgoing
interface."
::= { snDvmrpRouteNextHopEntry 2 }
snDvmrpRouteNextHopVifIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The snDvmrpVInterfaceVifIndex value of the virtual interface
for the outgoing interface for this next hop."
::= { snDvmrpRouteNextHopEntry 3 }
snDvmrpRouteNextHopType OBJECT-TYPE
SYNTAX INTEGER { leaf(1), branch(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Type is leaf if no neighbors exist on the outgoing virtual
interface. Otherwise, type is branch."
::= { snDvmrpRouteNextHopEntry 4 }
-- The DVMRP Virtual Interface Statistics Table
snDvmrpVIfStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnDvmrpVIfStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the router's DVMRP virtual interface
statistical counters. snDvmrpEnable must be 'enabled' before this
table is read."
::= { snDvmrpMIBObjects 17 }
snDvmrpVIfStatEntry OBJECT-TYPE
SYNTAX SnDvmrpVIfStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the snDvmrpVIfStatTable."
INDEX { snDvmrpVIfStatVifIndex }
::= { snDvmrpVIfStatTable 1 }
SnDvmrpVIfStatEntry ::= SEQUENCE {
snDvmrpVIfStatVifIndex INTEGER,
snDvmrpVIfStatInPkts Counter,
snDvmrpVIfStatOutPkts Counter,
snDvmrpVIfStatInOctets Counter,
snDvmrpVIfStatOutOctets Counter,
snDvmrpVIfStatInProbePkts Counter,
snDvmrpVIfStatOutProbePkts Counter,
snDvmrpVIfStatDiscardProbePkts Counter,
snDvmrpVIfStatInRtUpdatePkts Counter,
snDvmrpVIfStatOutRtUpdatePkts Counter,
snDvmrpVIfStatDiscardRtUpdatePkts Counter,
snDvmrpVIfStatInGraftPkts Counter,
snDvmrpVIfStatOutGraftPkts Counter,
snDvmrpVIfStatDiscardGraftPkts Counter,
snDvmrpVIfStatInGraftAckPkts Counter,
snDvmrpVIfStatOutGraftAckPkts Counter,
snDvmrpVIfStatDiscardGraftAckPkts Counter,
snDvmrpVIfStatInPrunePkts Counter,
snDvmrpVIfStatOutPrunePkts Counter,
snDvmrpVIfStatDiscardPrunePkts Counter }
snDvmrpVIfStatVifIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ifIndex value of this DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 1 }
snDvmrpVIfStatInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets that have arrived on the DVMRP
virtual interface."
::= { snDvmrpVIfStatEntry 2 }
snDvmrpVIfStatOutPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets that have been sent on the DVMRP
virtual interface."
::= { snDvmrpVIfStatEntry 3 }
snDvmrpVIfStatInOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of octets that have arrived on the DVMRP
virtual interface."
::= { snDvmrpVIfStatEntry 4 }
snDvmrpVIfStatOutOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of octets that have been sent on the DVMRP
virtual interface."
::= { snDvmrpVIfStatEntry 5 }
snDvmrpVIfStatInProbePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of probe packets that have arrived
on the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 6 }
snDvmrpVIfStatOutProbePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of probe packets that have been sent
on the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 7 }
snDvmrpVIfStatDiscardProbePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of probe packets that have been discarded
by the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 8 }
snDvmrpVIfStatInRtUpdatePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of route update packets that have arrived
on the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 9 }
snDvmrpVIfStatOutRtUpdatePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of route update packets that have been sent
on the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 10 }
snDvmrpVIfStatDiscardRtUpdatePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of route update packets that have been
discarded by the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 11 }
snDvmrpVIfStatInGraftPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft packets that have arrived
on the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 12 }
snDvmrpVIfStatOutGraftPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft packets that have been sent
on the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 13 }
snDvmrpVIfStatDiscardGraftPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft packets that have been discarded
by the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 14 }
snDvmrpVIfStatInGraftAckPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft acknowledge packets that have arrived
on the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 15 }
snDvmrpVIfStatOutGraftAckPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft acknowledge packets that have been
sent on the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 16 }
snDvmrpVIfStatDiscardGraftAckPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft acknowledge packets that have been
discarded by the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 17 }
snDvmrpVIfStatInPrunePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of prune packets that have arrived on the DVMRP
virtual interface."
::= { snDvmrpVIfStatEntry 18 }
snDvmrpVIfStatOutPrunePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of prune packets that have been sent on the DVMRP
virtual interface."
::= { snDvmrpVIfStatEntry 19 }
snDvmrpVIfStatDiscardPrunePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of prune packets that have been discarded
by the DVMRP virtual interface."
::= { snDvmrpVIfStatEntry 20 }
-- FSRP MIB
snFsrpGlobal OBJECT IDENTIFIER ::= { snFsrp 1 }
snFsrpIntf OBJECT IDENTIFIER ::= { snFsrp 2 }
-- Section 1: FSRP Global Variables
snFsrpGroupOperMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The FSRP is configured on this system
either enabled or disabled and the
default is disabled mode.
disabled(0)..........disable FSRP
enabled(1)...........activate FSRP"
::= { snFsrpGlobal 1 }
snFsrpIfStateChangeTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the SNMP agent process is
permitted to generate FSRP interface state change
traps."
DEFVAL { enabled }
::= { snFsrpGlobal 2 }
-- Section 2: FSRP Interface Configuration Table
-- The FSRP (Foundry Standby Routing Protocol) Interface Table augments
-- the ifTable with FSRP specific information.
snFsrpIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnFsrpIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The FSRP Interface Table describes the interfaces from
the viewpoint of FSRP."
::= { snFsrpIntf 1 }
snFsrpIfEntry OBJECT-TYPE
SYNTAX SnFsrpIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The FSRP Interface Entry describes one interface from
the viewpoint of FSRP."
INDEX { snFsrpIfPort, snFsrpIfIpAddress }
::= { snFsrpIfTable 1 }
SnFsrpIfEntry ::=
SEQUENCE {
snFsrpIfPort
INTEGER,
snFsrpIfIpAddress
IpAddress,
snFsrpIfVirRtrIpAddr
IpAddress,
snFsrpIfOtherRtrIpAddr
IpAddress,
snFsrpIfPreferLevel
INTEGER,
snFsrpIfTrackPortMask
PortMask,
snFsrpIfRowStatus
INTEGER,
snFsrpIfState
INTEGER,
snFsrpIfKeepAliveTime
INTEGER,
snFsrpIfRouterDeadTime
INTEGER,
snFsrpIfChassisTrackPortMask
OCTET STRING,
snFsrpIfTrackPortList
OCTET STRING
}
snFsrpIfPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The physical router port of this FSRP interface."
::= { snFsrpIfEntry 1 }
snFsrpIfIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP Address of the physical router port of this
interface."
::= { snFsrpIfEntry 2 }
snFsrpIfVirRtrIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP Address of the Virtual Router for the interface.
The Virtual Router IP address need to be configured on
the interface before Redundant Router Function can operate
on the interface. This address has to be same on all the
routers that going to participate in the Redundant Router
Function on a given subnet."
::= { snFsrpIfEntry 3 }
snFsrpIfOtherRtrIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP Address of the Other Router on this ip subnet
that operates FSRP and to whom the Keep Alive message
need to be sent by this router. This object must be
configured for FSRP to work correctly"
::= { snFsrpIfEntry 4 }
snFsrpIfPreferLevel OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The higher the number the higher the priority is.
This parameter decides which router should becomes
the Active Router for the interface. A Router with
higher priority selected to becomes the Active Router."
DEFVAL { 100 }
::= { snFsrpIfEntry 5 }
snFsrpIfTrackPortMask OBJECT-TYPE
SYNTAX PortMask
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies the identity of the physical port
whose state is to be monitored. Each bit is a port of
the system. Default value is 0. If this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The Standalone router FSRP Track port membership (Not used for Chassis Product)"
DEFVAL { 0 }
::= { snFsrpIfEntry 6 }
snFsrpIfRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snFsrpIfEntry 7 }
snFsrpIfState OBJECT-TYPE
SYNTAX INTEGER {
init(0),
negotiating(1),
standby(2),
active(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object specifies the FSRP Router's interface state as:
init(0)...initialization state.
negotiating(1)...negotiating state.
standby(2)...standby state.
active(3)...active state."
::= { snFsrpIfEntry 8 }
snFsrpIfKeepAliveTime OBJECT-TYPE
SYNTAX INTEGER (1..120)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The heart-beat is from 1 to 120 seconds."
DEFVAL { 3 }
::= { snFsrpIfEntry 9 }
snFsrpIfRouterDeadTime OBJECT-TYPE
SYNTAX INTEGER (3..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The hold time of the Fsrp router is from 3 to 255 seconds."
DEFVAL { 9 }
::= { snFsrpIfEntry 10 }
snFsrpIfChassisTrackPortMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(32))
ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object specifies the identity of the physical port
whose state is to be monitored. Each bit is a port of
the system. Default value is 0. If this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The Chassis router FSRP Track port membership.
(It was obsoleted after release 07100, replaced by snFsrpIfTrackPortList)"
::= { snFsrpIfEntry 11 }
snFsrpIfTrackPortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object specifies the identity of the physical port
whose state is to be monitored. Each port index is a
16-bit integer in big endian order. 8-bit is the slot
number, the other 8-bit is the port number. Default value
is 0 length octet string. If this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The router FSRP physical track port membership."
::= { snFsrpIfEntry 12 }
-- PIM MIB
snPimMIBObjects OBJECT IDENTIFIER ::= { snPim 1 }
snPimSMMIBObjects OBJECT IDENTIFIER ::= { snPim 2 }
snPimEnable OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable PIM on this router."
DEFVAL { disabled }
::= { snPimMIBObjects 1 }
snPimNeighborRouterTimeout OBJECT-TYPE
SYNTAX INTEGER (60..8000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the time interval after which the neighbour router
is considered down. Value is in number of seconds. snPimEnable
must be 'enabled' before this object is writen."
DEFVAL { 180 }
::= { snPimMIBObjects 2 }
snPimHelloTime OBJECT-TYPE
SYNTAX INTEGER (10..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the interval at which hello message is sent out
an interface to the neighbouring router. This is used to
detect the presence or abscense of a neighbouring router.
Value is in number of seconds. snPimEnable must be 'enabled'
before this object is writen."
DEFVAL { 60 }
::= { snPimMIBObjects 3 }
snPimPruneTime OBJECT-TYPE
SYNTAX INTEGER (10..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the duration of time for which the prune state
is stored. Value is in number of seconds. snPimEnable
must be 'enabled' before this object is writen."
DEFVAL { 60 }
::= { snPimMIBObjects 4 }
snPimGraftRetransmitTime OBJECT-TYPE
SYNTAX INTEGER (10..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the time interval after which a graft message will
be retransmitted if graft acknowledge message has not been
received. Value is in number of seconds. snPimEnable must
be 'enabled' before this object is writen."
DEFVAL { 180 }
::= { snPimMIBObjects 5 }
snPimInactivityTime OBJECT-TYPE
SYNTAX INTEGER (10..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the interval after which the forwarding entry is
deleted. When a packet is received for a group entry, this
time is reset. This is used to only keep the forwarding
entries for the active sessions. Value is in number of
seconds. snPimEnable must be 'enabled' before this object
is writen."
DEFVAL { 180 }
::= { snPimMIBObjects 6 }
-- The PIM Virtual Interface Table
snPimVInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnPimVInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the router's PIM virtual
interfaces. snPimEnable must be 'enabled' before this
table is read or writen."
::= { snPimMIBObjects 7 }
snPimVInterfaceEntry OBJECT-TYPE
SYNTAX SnPimVInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the snPimVInterfaceTable."
INDEX { snPimVInterfaceVifIndex }
::= { snPimVInterfaceTable 1 }
SnPimVInterfaceEntry ::= SEQUENCE {
snPimVInterfaceVifIndex INTEGER,
snPimVInterfaceType INTEGER,
snPimVInterfaceLocalAddress IpAddress,
snPimVInterfaceLocalSubnetMask IpAddress,
snPimVInterfaceRemoteAddress IpAddress,
snPimVInterfaceDR IpAddress,
snPimVInterfaceTtlThreshold INTEGER,
snPimVInterfaceStatus INTEGER,
snPimVInterfaceMode INTEGER }
snPimVInterfaceVifIndex OBJECT-TYPE
SYNTAX INTEGER (1..48)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ifIndex value of this PIM virtual interface."
::= { snPimVInterfaceEntry 1 }
snPimVInterfaceType OBJECT-TYPE
SYNTAX INTEGER { tunnel(1), subnet(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of PIM virtual interface, whether it uses
a tunnel or a physical interface."
::= { snPimVInterfaceEntry 2 }
snPimVInterfaceLocalAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of the local end of this PIM virtual
interface."
::= { snPimVInterfaceEntry 3 }
snPimVInterfaceLocalSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The network mask for the IP address of the PIM
virtual interface. For a tunnel, this should be
0.0.0.0."
::= { snPimVInterfaceEntry 4 }
snPimVInterfaceRemoteAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of the remote end of this PIM virtual
interface."
::= { snPimVInterfaceEntry 5 }
snPimVInterfaceDR OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Designated Router on this PIM virtual interface.
For point-to-point interfaces, this object has the
value 0.0.0.0."
::= { snPimVInterfaceEntry 6 }
snPimVInterfaceTtlThreshold OBJECT-TYPE
SYNTAX INTEGER (1..31)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the minimum time-to-live value to forward the packets
out of this interface."
DEFVAL { 1 }
::= { snPimVInterfaceEntry 7 }
snPimVInterfaceStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative.
valid(2)....Setting it to 'valid' has the effect of
changing the row to operative."
::= { snPimVInterfaceEntry 8 }
snPimVInterfaceMode OBJECT-TYPE
SYNTAX INTEGER { dense(1), sparse(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The configured mode of this PIM interface."
DEFVAL { dense }
::= { snPimVInterfaceEntry 9 }
-- The PIM Neighbor Table
snPimNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnPimNeighborEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the router's PIM
neighbors. snPimEnable must be 'enabled' before this
table is read."
::= { snPimMIBObjects 8 }
snPimNeighborEntry OBJECT-TYPE
SYNTAX SnPimNeighborEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the snPimNeighborTable."
INDEX { snPimNeighborEntryIndex }
::= { snPimNeighborTable 1 }
SnPimNeighborEntry ::= SEQUENCE {
snPimNeighborEntryIndex INTEGER,
snPimNeighborVifIndex INTEGER,
snPimNeighborAddress IpAddress,
snPimNeighborUpTime TimeTicks,
snPimNeighborExpiryTime TimeTicks }
snPimNeighborEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table entry index."
::= { snPimNeighborEntry 1 }
snPimNeighborVifIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of VifIndex for the virtual interface used to
reach this PIM neighbor."
::= { snPimNeighborEntry 2 }
snPimNeighborAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the PIM neighbor for which this entry
contains information."
::= { snPimNeighborEntry 3 }
snPimNeighborUpTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time since this PIM neighbor (last) became a neighbor
of the local router."
::= { snPimNeighborEntry 4 }
snPimNeighborExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum time remaining before this PIM neighbor will
be aged out."
::= { snPimNeighborEntry 5 }
-- The PIM Virtual Interface Statistics Table
snPimVIfStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnPimVIfStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the router's PIM virtual
interface statistical counters. snPimEnable must be
'enabled' before this table is read."
::= { snPimMIBObjects 9 }
snPimVIfStatEntry OBJECT-TYPE
SYNTAX SnPimVIfStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the snPimVIfStatTable."
INDEX { snPimVIfStatVifIndex }
::= { snPimVIfStatTable 1 }
SnPimVIfStatEntry ::= SEQUENCE {
snPimVIfStatVifIndex INTEGER,
snPimVIfStatInJoinPkts Counter,
snPimVIfStatOutJoinPkts Counter,
snPimVIfStatDiscardJoinPkts Counter,
snPimVIfStatInPrunePkts Counter,
snPimVIfStatOutPrunePkts Counter,
snPimVIfStatDiscardPrunePkts Counter,
snPimVIfStatInAssertPkts Counter,
snPimVIfStatOutAssertPkts Counter,
snPimVIfStatDiscardAssertPkts Counter,
snPimVIfStatInHelloPkts Counter,
snPimVIfStatOutHelloPkts Counter,
snPimVIfStatDiscardHelloPkts Counter,
snPimVIfStatInGraftPkts Counter,
snPimVIfStatOutGraftPkts Counter,
snPimVIfStatDiscardGraftPkts Counter,
snPimVIfStatInGraftAckPkts Counter,
snPimVIfStatOutGraftAckPkts Counter,
snPimVIfStatDiscardGraftAckPkts Counter }
snPimVIfStatVifIndex OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ifIndex value of this PIM virtual interface."
::= { snPimVIfStatEntry 1 }
snPimVIfStatInJoinPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of join packets that have arrived
on the PIM virtual interface."
::= { snPimVIfStatEntry 2 }
snPimVIfStatOutJoinPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of join packets that have been sent
on the PIM virtual interface."
::= { snPimVIfStatEntry 3 }
snPimVIfStatDiscardJoinPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of join packets that have been discarded
by the PIM virtual interface."
::= { snPimVIfStatEntry 4 }
snPimVIfStatInPrunePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of prune packets that have arrived on the PIM
virtual interface."
::= { snPimVIfStatEntry 5 }
snPimVIfStatOutPrunePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of prune packets that have been sent on the PIM
virtual interface."
::= { snPimVIfStatEntry 6 }
snPimVIfStatDiscardPrunePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of prune packets that have been discarded
by the PIM virtual interface."
::= { snPimVIfStatEntry 7 }
snPimVIfStatInAssertPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of assert packets that have arrived
on the PIM virtual interface."
::= { snPimVIfStatEntry 8 }
snPimVIfStatOutAssertPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of assert packets that have been sent
on the PIM virtual interface."
::= { snPimVIfStatEntry 9 }
snPimVIfStatDiscardAssertPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of assert packets that have been
discarded by the PIM virtual interface."
::= { snPimVIfStatEntry 10 }
snPimVIfStatInHelloPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of hello packets that have arrived on the PIM
virtual interface."
::= { snPimVIfStatEntry 11 }
snPimVIfStatOutHelloPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of hello packets that have been sent on the PIM
virtual interface."
::= { snPimVIfStatEntry 12 }
snPimVIfStatDiscardHelloPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of hello packets that have been discarded
by the PIM virtual interface."
::= { snPimVIfStatEntry 13 }
snPimVIfStatInGraftPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft packets that have arrived
on the PIM virtual interface."
::= { snPimVIfStatEntry 14 }
snPimVIfStatOutGraftPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft packets that have been sent
on the PIM virtual interface."
::= { snPimVIfStatEntry 15 }
snPimVIfStatDiscardGraftPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft packets that have been discarded
by the PIM virtual interface."
::= { snPimVIfStatEntry 16 }
snPimVIfStatInGraftAckPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft acknowledge packets that have arrived
on the PIM virtual interface."
::= { snPimVIfStatEntry 17 }
snPimVIfStatOutGraftAckPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft acknowledge packets that have been
sent on the PIM virtual interface."
::= { snPimVIfStatEntry 18 }
snPimVIfStatDiscardGraftAckPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of graft acknowledge packets that have been
discarded by the PIM virtual interface."
::= { snPimVIfStatEntry 19 }
-- PIM-SM MIB
snPimJoinPruneInterval OBJECT-TYPE
SYNTAX INTEGER (10..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The default interval in seconds at which periodic
PIM-SM Join/Prune messages are to be sent. snPimEnable must
be 'enabled' before this table is read or writen."
::= { snPimSMMIBObjects 1 }
-- PIM Candidate-BSR Table
snPimCandidateBSRTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnPimCandidateBSR
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Candidate Bootstrap Router information."
::= { snPimSMMIBObjects 2 }
snPimCandidateBSREntry OBJECT-TYPE
SYNTAX SnPimCandidateBSR
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the snPimCandidateBSRTable."
INDEX { snPimCandidateBSRPortID }
::= { snPimCandidateBSRTable 1 }
SnPimCandidateBSR ::= SEQUENCE {
snPimCandidateBSRPortID INTEGER,
snPimCandidateBSRIPAddress IpAddress,
snPimCandidateBSRHashMaskLen INTEGER,
snPimCandidateBSRPreference INTEGER
}
snPimCandidateBSRPortID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of the PIM interface.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number."
::= { snPimCandidateBSREntry 1 }
snPimCandidateBSRIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The (unicast) address of the Candidate BSR."
::= { snPimCandidateBSREntry 2 }
snPimCandidateBSRHashMaskLen OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The hash mask value for this router as a candidate
bootstrap router."
::= { snPimCandidateBSREntry 3 }
snPimCandidateBSRPreference OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The preference value for this router as a candidate
bootstrap router."
DEFVAL { 100 }
::= { snPimCandidateBSREntry 4 }
-- The PIM RP-Set Table
snPimRPSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnPimRPSetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing PIM information for
candidate Rendezvous Points (RPs) for IP multicast groups.
When the local router is the BSR, this information is
obtained from received Candidate-RP-Advertisements. When
the local router is not the BSR, this information is
obtained from received RP-Set messages.
snPimEnable must be 'enabled' before this
table is read or writen."
::= { snPimSMMIBObjects 3 }
snPimRPSetEntry OBJECT-TYPE
SYNTAX SnPimRPSetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the snPimRPSetTable."
INDEX { snPimRPSetGroupAddress, snPimRPSetMask, snPimRPSetIPAddress }
::= { snPimRPSetTable 1 }
SnPimRPSetEntry ::= SEQUENCE {
snPimRPSetGroupAddress IpAddress,
snPimRPSetMask IpAddress,
snPimRPSetIPAddress IpAddress,
snPimRPSetHoldTime INTEGER
}
snPimRPSetGroupAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP multicast group address which, when combined with
snPimRPSetGroupMask, gives the group prefix for which this
entry contains information about the Candidate-RP."
::= { snPimRPSetEntry 1 }
snPimRPSetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The multicast group address mask which, when combined with
snPimRPSetGroupAddress, gives the group prefix for which this
entry contains information about the Candidate-RP."
::= { snPimRPSetEntry 2 }
snPimRPSetIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the Candidate-RP."
::= { snPimRPSetEntry 3 }
snPimRPSetHoldTime OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The holdtime, in seconds, of a Candidate-RP. If the
local router is not the BSR, this value is 0."
::= { snPimRPSetEntry 4 }
-- The PIM Candidate-RP Table
snPimCandidateRPTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnPimCandidateRPEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The (conceptual) table listing the IP multicast groups for
which the local router is to advertise itself as a
Candidate-RP. If this table is empty, then the local router
will advertise itself as a Candidate-RP for all groups
snPimEnable must be 'enabled' before this
table is read or writen."
::= { snPimSMMIBObjects 4 }
snPimCandidateRPEntry OBJECT-TYPE
SYNTAX SnPimCandidateRPEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) in the snPimCandidateRPTable."
INDEX { snPimCandidateRPGroupAddress,
snPimCandidateRPMask }
::= { snPimCandidateRPTable 1 }
SnPimCandidateRPEntry ::= SEQUENCE {
snPimCandidateRPGroupAddress IpAddress,
snPimCandidateRPMask IpAddress,
snPimCandidateRPIPAddress IpAddress,
snPimCandidateRPRowStatus INTEGER
}
snPimCandidateRPGroupAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP multicast group address which, when combined with
snPimCandidateRPGroupMask, identifies a group prefix for which
the local router will advertise itself as a Candidate-RP."
::= { snPimCandidateRPEntry 1 }
snPimCandidateRPMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The multicast group address mask which, when combined with
snPimCandidateRPGroupMask, identifies a group prefix for which
the local router will advertise itself as a Candidate-RP."
::= { snPimCandidateRPEntry 2 }
snPimCandidateRPIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The (unicast) address of the interface which will be
advertised as a Candidate-RP."
::= { snPimCandidateRPEntry 3 }
snPimCandidateRPRowStatus OBJECT-TYPE
SYNTAX INTEGER {
noSuch(0),
other(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table.
This object is used to create and delete row in the
table and control if they are used. The values that
can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with value of create(4)
returns error 'badValue'. Deleted rows go away
immediately. The following values can be returned on reads:
noSuch(0)...no such row
other(1)....some other case
valid(2)....the row exists and is valid"
::= { snPimCandidateRPEntry 4 }
-- Loopback Interface configuration table
snLoopbackIntfConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnLoopbackIntfConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Loopback Interface Config table."
::= { snLoopbackIf 1 }
snLoopbackIntfConfigEntry OBJECT-TYPE
SYNTAX SnLoopbackIntfConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Loopback Interface Config table."
INDEX { snLoopbackIntfConfigPortIndex }
::= { snLoopbackIntfConfigTable 1 }
SnLoopbackIntfConfigEntry ::= SEQUENCE {
snLoopbackIntfConfigPortIndex
INTEGER,
snLoopbackIntfMode
INTEGER,
snLoopbackIntfRowStatus
INTEGER
}
snLoopbackIntfConfigPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..8)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port index for Loopback Interface config entry."
::= { snLoopbackIntfConfigEntry 1 }
snLoopbackIntfMode OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Loopback Interface mode."
::= { snLoopbackIntfConfigEntry 2 }
snLoopbackIntfRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snLoopbackIntfConfigEntry 3 }
END
HP-SN-IGMP-MIB DEFINITIONS ::= BEGIN
-- Foundry IGMP Group MIB Release 1.0.0
-- Revision 0 2/13/98
-- Copyright 1996-98 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry Networks SNMP Management Information Base
-- Specification embodies Foundry Networks' confidential and
-- proprietary intellectual property. Foundry Networks retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS," and Foundry Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
-- SECTION 1: Top Level Definitions
-- Imports
IMPORTS
IpAddress
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
snIgmp
FROM HP-SN-ROOT-MIB;
-- SECTION 2: MIB
-- IGMP MIB
snIgmpMIBObjects OBJECT IDENTIFIER ::= { snIgmp 1 }
snIgmpQueryInterval OBJECT-TYPE
SYNTAX INTEGER (1..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the time interval at which this entity sends out
IGMP host query packets. For a router, snDvmrpEnable must
have been set to 'enabled' before this object is writen.
For a switch, snSwGroupIpMcastMode must have been set to
'enabled' and snSwIpMcastQuerierMode must have been set
to 'querier' before this object is writen."
DEFVAL { 60 }
::= { snIgmpMIBObjects 1 }
snIgmpGroupMembershipTime OBJECT-TYPE
SYNTAX INTEGER (1..7200)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the time interval after which a group is considered
inactive. For a router, snDvmrpEnable must have been set to
'enabled' before this object is writen. For a switch,
snSwGroupIpMcastMode must have been set to 'enabled' before
this object is writen."
DEFVAL { 140 }
::= { snIgmpMIBObjects 2 }
-- The IGMP Interface Table
snIgmpIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIgmpIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table comprises of a list of IGMP interface entries."
::= { snIgmpMIBObjects 3 }
snIgmpIfEntry OBJECT-TYPE
SYNTAX SnIgmpIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) contains the group
membership information for that port."
INDEX { snIgmpIfEntryIndex }
::= { snIgmpIfTable 1 }
SnIgmpIfEntry ::= SEQUENCE {
snIgmpIfEntryIndex INTEGER,
snIgmpIfPortNumber INTEGER,
snIgmpIfGroupAddress IpAddress,
snIgmpIfGroupAge INTEGER }
snIgmpIfEntryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table entry index."
::= { snIgmpIfEntry 1 }
snIgmpIfPortNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the interface on which the group was learnt."
::= { snIgmpIfEntry 2 }
snIgmpIfGroupAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group address learnt from the interface."
::= { snIgmpIfEntry 3 }
snIgmpIfGroupAge OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the interval (seconds) after which the group
information will be aged out."
::= { snIgmpIfEntry 4 }
-- The IGMP Static Group Table
snIgmpStaticGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnIgmpStaticGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table comprises of a list of IGMP static group entries."
::= { snIgmpMIBObjects 4 }
snIgmpStaticGroupEntry OBJECT-TYPE
SYNTAX SnIgmpStaticGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry (conceptual row) contains the IGMP static group
membership information."
INDEX { snIgmpStaticGroupIfIndex, snIgmpStaticGroupAddress }
::= { snIgmpStaticGroupTable 1 }
SnIgmpStaticGroupEntry ::= SEQUENCE {
snIgmpStaticGroupIfIndex INTEGER,
snIgmpStaticGroupAddress IpAddress,
snIgmpStaticGroupPortList OCTET STRING,
snIgmpStaticGroupRowStatus INTEGER }
snIgmpStaticGroupIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The interface of which the static group was configured."
::= { snIgmpStaticGroupEntry 1 }
snIgmpStaticGroupAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The group address of which the static group was configured."
::= { snIgmpStaticGroupEntry 2 }
snIgmpStaticGroupPortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A list of ports which are the port membership of the
static group. Each port is a 16-bit integer ifIndex."
::= { snIgmpStaticGroupEntry 3 }
snIgmpStaticGroupRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4),
modify(5) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a static group entry."
::= { snIgmpStaticGroupEntry 4 }
END
HP-SN-APPLETALK-MIB DEFINITIONS ::= BEGIN
-- Foundry snAppleTalk Group MIB Release 1.0.0
-- Revision 0 1/19/98
-- Copyright 1996-98 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry Networks SNMP Management Information Base
-- Specification embodies Foundry Networks' confidential and
-- proprietary intellectual property. Foundry Networks retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS," and Foundry Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
-- SECTION 1: Top Level Definitions
-- Imports
IMPORTS
Counter
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
ClearStatus, RowSts, PortIndex
FROM HP-SN-IP-MIB
snAppleTalk
FROM HP-SN-ROOT-MIB;
ATNetworkNumber ::= -- 2 octets of net number
-- in network byte order
OCTET STRING (SIZE (2))
DdpNodeAddress ::= -- 2 octets of net number
-- in network byte order,
-- 1 octet of node number
OCTET STRING (SIZE (3))
ATName ::= -- 0 to 32 octets of AppleTalk
-- ASCII [Inside AppleTalk]
OCTET STRING (SIZE (0..32))
-- RtrStatus Values
RtrStatus ::= INTEGER { disabled(0), enabled (1) }
-- Action
Action ::= INTEGER { deny(0), permit(1) }
-- SECTION 2: MIB
-- Router AppleTalk MIB
-- This section contains AppleTalk specific router MIB object definitions.
-- AppleTalk general group
snRtATGeneral OBJECT IDENTIFIER ::= { snAppleTalk 1 }
snRtATRoutingEnable OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable AppleTalk routing function on this box."
::= { snRtATGeneral 1 }
snRtATClearArpCache OBJECT-TYPE
SYNTAX ClearStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear(1) will clear AppleTalk arp cache table."
::= { snRtATGeneral 2 }
snRtATClearFwdCache OBJECT-TYPE
SYNTAX ClearStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear(1) will clear AppleTalk forward cache table."
::= { snRtATGeneral 3 }
snRtATClearRoute OBJECT-TYPE
SYNTAX ClearStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear(1) will clear AppleTalk route table."
::= { snRtATGeneral 4 }
snRtATClearTrafficCounters OBJECT-TYPE
SYNTAX ClearStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"clear(1) will clear AppleTalk network statistics counters."
::= { snRtATGeneral 5 }
snRtATArpRetransmitCount OBJECT-TYPE
SYNTAX INTEGER (1..10)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of AppleTalk ARP request retransmits if the
first request timeouts."
DEFVAL { 2 }
::= { snRtATGeneral 6 }
snRtATArpRetransmitInterval OBJECT-TYPE
SYNTAX INTEGER (1..120)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The waiting time interval for an AppleTalk ARP response
before retransmission of an ARP request. Each unit value
is one second."
DEFVAL { 1 }
::= { snRtATGeneral 7 }
snRtATGleanPacketsEnable OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable AppleTalk glean packets function on this box."
DEFVAL { disabled }
::= { snRtATGeneral 8 }
snRtATRtmpUpdateInterval OBJECT-TYPE
SYNTAX INTEGER (1..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The periodic time interval to transmit a RTMP
update. Each unit value is one second."
DEFVAL { 10 }
::= { snRtATGeneral 9 }
snRtATZipQueryInterval OBJECT-TYPE
SYNTAX INTEGER (1..1000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The periodic time interval to transmit a ZIP
query. Each unit value is one second."
DEFVAL { 10 }
::= { snRtATGeneral 10 }
snRtATInRtmpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of RTMP packets received by
this entity."
::= { snRtATGeneral 11 }
snRtATOutRtmpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of RTMP packets which were
transmitted from this entity."
::= { snRtATGeneral 12 }
snRtATFilteredRtmpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of RTMP packets which were
filtered by this entity."
::= { snRtATGeneral 13 }
snRtATInZipPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ZIP packets received by
this entity."
::= { snRtATGeneral 14 }
snRtATOutZipPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ZIP packets which were
transmitted from this entity."
::= { snRtATGeneral 15 }
snRtATInZipGZLPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ZIP get zone list packets received by
this entity."
::= { snRtATGeneral 16 }
snRtATOutZipGZLPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ZIP get zone list packets which were
transmitted from this entity."
::= { snRtATGeneral 17 }
snRtATInZipNetInfoPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ZIP network information packets received by
this entity."
::= { snRtATGeneral 18 }
snRtATOutZipNetInfoPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ZIP network information packets which were
transmitted from this entity."
::= { snRtATGeneral 19 }
snRtATInDdpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of DDP datagrams received by
this entity."
::= { snRtATGeneral 20 }
snRtATOutDdpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of DDP datagrams which were
transmitted from this entity."
::= { snRtATGeneral 21 }
snRtATForwardedDdpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of input DDP datagrams for which this entity
was not their final DDP destination, as a result of
which an attempt was made to find a route to forward
them to that final destination."
::= { snRtATGeneral 22 }
snRtATInDeliveredDdpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of input DDP datagrams for which
this entity was their final DDP destination."
::= { snRtATGeneral 23 }
snRtATDroppedNoRouteDdpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of DDP datagrams dropped because a
route could not be found to their final destination."
::= { snRtATGeneral 24 }
snRtATDroppedBadHopCountsDdpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of input DDP datagrams dropped
because this entity was not their final destination
and their hop count would exceed 15."
::= { snRtATGeneral 25 }
snRtATDroppedOtherReasonsDdpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of DDP datagrams dropped because
of other reasons, e.g. run out of resouces."
::= { snRtATGeneral 26 }
snRtATInAarpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of AppleTalk ARP packets received by
this entity."
::= { snRtATGeneral 27 }
snRtATOutAarpPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of AppleTalk ARP packets which were
transmitted from this entity."
::= { snRtATGeneral 28 }
-- AppleTalk socket priority table
snRtATSocketPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtATSocketPriorityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"AppleTalk socket priority table."
::= { snAppleTalk 2 }
snRtATSocketPriorityEntry OBJECT-TYPE
SYNTAX SnRtATSocketPriorityEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the AppleTalk socket priority table."
INDEX { snRtATSocketPrioritySocket }
::= { snRtATSocketPriorityTable 1 }
SnRtATSocketPriorityEntry ::= SEQUENCE {
snRtATSocketPrioritySocket
INTEGER,
snRtATSocketPriorityPriority
INTEGER
}
snRtATSocketPrioritySocket OBJECT-TYPE
SYNTAX INTEGER (1..254)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Socket number for a socket priority entry."
::= { snRtATSocketPriorityEntry 1 }
snRtATSocketPriorityPriority OBJECT-TYPE
SYNTAX INTEGER {
level0(0),
level1(1),
level2(2),
level3(3),
level4(4),
level5(5),
level6(6),
level7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Standalone router Priority level applies to a socket number:
low(0) -- low prority
high(1) -- high prority.
The BigIron Priority levels applies to a socket number are:
level0(0), level1(1), level2(2), level3(3),
level4(4), level5(5), level6(6), level7(7) "
::= { snRtATSocketPriorityEntry 2 }
-- AppleTalk interface zone filter table
snRtATPortZoneFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtATPortZoneFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"AppleTalk interface zone filter table."
::= { snAppleTalk 3 }
snRtATPortZoneFilterEntry OBJECT-TYPE
SYNTAX SnRtATPortZoneFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the AppleTalk interface zone filter table."
INDEX { snRtATPortZoneFilterPortIndex, snRtATPortZoneFilterZone }
::= { snRtATPortZoneFilterTable 1 }
SnRtATPortZoneFilterEntry ::= SEQUENCE {
snRtATPortZoneFilterPortIndex
PortIndex,
snRtATPortZoneFilterZone
ATName,
snRtATPortZoneFilterAction
Action,
snRtATPortZoneFilterRtmpEnable
RtrStatus,
snRtATPortZoneFilterRowStatus
RowSts
}
snRtATPortZoneFilterPortIndex OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port index for a zone filter entry."
::= { snRtATPortZoneFilterEntry 1 }
snRtATPortZoneFilterZone OBJECT-TYPE
SYNTAX ATName
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The zone name granted for this filter."
::= { snRtATPortZoneFilterEntry 2 }
snRtATPortZoneFilterAction OBJECT-TYPE
SYNTAX Action
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the AppleTalk packet match
with this filter."
::= { snRtATPortZoneFilterEntry 3 }
snRtATPortZoneFilterRtmpEnable OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable RTMP filtering."
::= { snRtATPortZoneFilterEntry 4 }
snRtATPortZoneFilterRowStatus OBJECT-TYPE
SYNTAX RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a zone filter entry."
::= { snRtATPortZoneFilterEntry 5 }
-- AppleTalk port table
snRtATPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtATPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"AppleTalk port table."
::= { snAppleTalk 4 }
snRtATPortEntry OBJECT-TYPE
SYNTAX SnRtATPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the AppleTalk port table."
INDEX { snRtATPortIndex }
::= { snRtATPortTable 1 }
SnRtATPortEntry ::= SEQUENCE {
snRtATPortIndex
PortIndex,
snRtATPortArpAge
INTEGER,
snRtATPortState
INTEGER,
snRtATPortSeedRouter
INTEGER,
snRtATPortOperationMode
INTEGER
}
snRtATPortIndex OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port index for port table entry."
::= { snRtATPortEntry 1 }
snRtATPortArpAge OBJECT-TYPE
SYNTAX INTEGER (0..240)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time in minutes an ARP entry can
be valid without relearning.
0 - Don't age."
DEFVAL { 10 }
::= { snRtATPortEntry 2 }
snRtATPortState OBJECT-TYPE
SYNTAX INTEGER {
other(1),
down(2),
up(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The up and down state of this port."
::= { snRtATPortEntry 3 }
snRtATPortSeedRouter OBJECT-TYPE
SYNTAX INTEGER {
other(1),
seedRouter(2),
nonSeedRouter(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This port was configured to seed or non-seed router."
::= { snRtATPortEntry 4 }
snRtATPortOperationMode OBJECT-TYPE
SYNTAX INTEGER {
other(1),
seedRouter(2),
nonSeedRouter(3),
notOperational(4),
routingDisabled(5) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The operation mode of this port."
::= { snRtATPortEntry 5 }
-- AppleTalk forwarding cache table
snRtATFwdCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtATFwdCacheEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"AppleTalk forwarding cache table."
::= { snAppleTalk 5 }
snRtATFwdCacheEntry OBJECT-TYPE
SYNTAX SnRtATFwdCacheEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the AppleTalk forwarding cache table."
INDEX { snRtATFwdCacheIndex }
::= { snRtATFwdCacheTable 1 }
SnRtATFwdCacheEntry ::= SEQUENCE {
snRtATFwdCacheIndex
INTEGER,
snRtATFwdCacheNetAddr
DdpNodeAddress,
snRtATFwdCacheMacAddr
OCTET STRING,
snRtATFwdCacheNextHop
DdpNodeAddress,
snRtATFwdCacheOutgoingPort
INTEGER,
snRtATFwdCacheType
INTEGER,
snRtATFwdCacheAction
INTEGER,
snRtATFwdCacheVLanId
INTEGER
}
snRtATFwdCacheIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for an AppleTalk forwarding cache table entry."
::= { snRtATFwdCacheEntry 1 }
snRtATFwdCacheNetAddr OBJECT-TYPE
SYNTAX DdpNodeAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The AppleTalk network address of a station."
::= { snRtATFwdCacheEntry 2 }
snRtATFwdCacheMacAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Mac address of an AppleTalk station."
::= { snRtATFwdCacheEntry 3 }
snRtATFwdCacheNextHop OBJECT-TYPE
SYNTAX DdpNodeAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The next hop router network address."
::= { snRtATFwdCacheEntry 4 }
snRtATFwdCacheOutgoingPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The outgoing port of which packets will forward to.
Return port value of zero to indicate no outgoing port
associated to this entry."
::= { snRtATFwdCacheEntry 5 }
snRtATFwdCacheType OBJECT-TYPE
SYNTAX INTEGER { dynamic(1), permanent(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 'dynamic' or 'permanent' type for an AppleTalk forwarding
cache table entry."
::= { snRtATFwdCacheEntry 6 }
snRtATFwdCacheAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
forward(2),
forUs(3),
waitForArp(4),
dropPacket(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The action to take."
::= { snRtATFwdCacheEntry 7 }
snRtATFwdCacheVLanId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VLAN ID for an AppleTalk forwarding cache table entry.
Return VLAN ID value of zero to indicate no VLAN associated
to this entry."
::= { snRtATFwdCacheEntry 8 }
-- AppleTalk zone table
snRtATZoneTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtATZoneEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"AppleTalk zone table."
::= { snAppleTalk 6 }
snRtATZoneEntry OBJECT-TYPE
SYNTAX SnRtATZoneEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the AppleTalk zone table."
INDEX { snRtATZoneIndex }
::= { snRtATZoneTable 1 }
SnRtATZoneEntry ::= SEQUENCE {
snRtATZoneIndex
INTEGER,
snRtATZoneNetStart
ATNetworkNumber,
snRtATZoneNetEnd
ATNetworkNumber,
snRtATZoneName
ATName
}
snRtATZoneIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for an AppleTalk zone table entry."
::= { snRtATZoneEntry 1 }
snRtATZoneNetStart OBJECT-TYPE
SYNTAX ATNetworkNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The first AppleTalk network address in the range
of this zone name."
::= { snRtATZoneEntry 2 }
snRtATZoneNetEnd OBJECT-TYPE
SYNTAX ATNetworkNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The last AppleTalk network address in the range
of this zone name."
::= { snRtATZoneEntry 3 }
snRtATZoneName OBJECT-TYPE
SYNTAX ATName
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The zone name."
::= { snRtATZoneEntry 4 }
-- AppleTalk additional zone filter table
snRtATAddZoneFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnRtATAddZoneFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"AppleTalk additional zone filter table. Additional zones
are those zones that do not match any zones defined in the
zone filter table."
::= { snAppleTalk 7 }
snRtATAddZoneFilterEntry OBJECT-TYPE
SYNTAX SnRtATAddZoneFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the AppleTalk additional zone filter table."
INDEX { snRtATAddZoneFilterPortIndex }
::= { snRtATAddZoneFilterTable 1 }
SnRtATAddZoneFilterEntry ::= SEQUENCE {
snRtATAddZoneFilterPortIndex
PortIndex,
snRtATAddZoneFilterAction
Action,
snRtATAddZoneFilterRtmpEnable
RtrStatus
}
snRtATAddZoneFilterPortIndex OBJECT-TYPE
SYNTAX PortIndex
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port index for additional zone filter table entry."
::= { snRtATAddZoneFilterEntry 1 }
snRtATAddZoneFilterAction OBJECT-TYPE
SYNTAX Action
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if no zone filter match."
::= { snRtATAddZoneFilterEntry 2 }
snRtATAddZoneFilterRtmpEnable OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable RTMP filtering on additional zone."
::= { snRtATAddZoneFilterEntry 3 }
END
HP-SN-SW-L4-SWITCH-GROUP-MIB DEFINITIONS ::= BEGIN
-- Foundry L4 Switch Group MIB Release 1.0.0
-- Revision 0 01/08/2000
-- Copyright 1996-98 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry Networks SNMP Management Information Base Specification
-- (Specification) embodies Foundry Networks' confidential and
-- proprietary intellectual property. Foundry Networks retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS," and Foundry Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
-- SECTION 1: Top Level Definitions
-- Imports
IMPORTS
IpAddress, Counter, TimeTicks
FROM RFC1155-SMI
Counter64 FROM SNMPv2-SMI
OBJECT-TYPE
FROM RFC-1212
snL4
FROM HP-SN-ROOT-MIB;
-- textual conventions
-- maximum of ports are 32.
-- Row Creation/Deletion Values
L4RowSts ::= INTEGER { other(1),
valid(2),
delete(3),
create(4),
modify(5)
}
-- L4 Status Values
L4Status ::= INTEGER { disabled(0), enabled(1) }
-- L4 Server Name
L4ServerName ::= OCTET STRING (SIZE(1..32))
-- L4 Flag Values
L4Flag ::= INTEGER { false(0), true(1) }
-- L4 Delete Sate
L4DeleteState ::= INTEGER { done(0),
waitunbind(1),
waitdelete(2)
}
-- WebCacheSate
WebCacheState ::= INTEGER { disabled(0),
enabled(1),
failed(2),
testing(3),
suspect(4),
shutdown(5),
active(6)
}
PhysAddress ::= OCTET STRING
-- This data type is used to model media addresses. For many
-- types of media, this will be in a binary representation.
-- For example, an ethernet address would be represented as
-- a string of 6 octets.
DisplayString ::=
OCTET STRING
-- This data type is used to model textual information taken
-- from the NVT ASCII character set. By convention, objects
-- with this syntax are declared as having
--
-- SIZE (0..255)
snL4Gen OBJECT IDENTIFIER ::= { snL4 1 }
snL4VirtualServer OBJECT IDENTIFIER ::= { snL4 2 }
snL4RealServer OBJECT IDENTIFIER ::= { snL4 3 }
snL4VirtualServerPort OBJECT IDENTIFIER ::= { snL4 4 }
snL4RealServerPort OBJECT IDENTIFIER ::= { snL4 5 }
snL4Bind OBJECT IDENTIFIER ::= { snL4 6 }
snL4VirtualServerStatus OBJECT IDENTIFIER ::= { snL4 7 }
snL4RealServerStatus OBJECT IDENTIFIER ::= { snL4 8 }
snL4VirtualServerPortStatus OBJECT IDENTIFIER ::= { snL4 9 }
snL4RealServerPortStatus OBJECT IDENTIFIER ::= { snL4 10 }
snL4Policy OBJECT IDENTIFIER ::= { snL4 11 }
snL4PolicyPortAccess OBJECT IDENTIFIER ::= { snL4 12 }
snL4Trap OBJECT IDENTIFIER ::= { snL4 13 }
snL4WebCache OBJECT IDENTIFIER ::= { snL4 14 }
snL4WebCacheGroup OBJECT IDENTIFIER ::= { snL4 15 }
snL4WebCacheTrafficStats OBJECT IDENTIFIER ::= { snL4 16 }
snL4WebUncachedTrafficStats OBJECT IDENTIFIER ::= { snL4 17 }
snL4WebCachePort OBJECT IDENTIFIER ::= { snL4 18 }
snL4RealServerCfg OBJECT IDENTIFIER ::= { snL4 19 }
snL4RealServerPortCfg OBJECT IDENTIFIER ::= { snL4 20 }
snL4VirtualServerCfg OBJECT IDENTIFIER ::= { snL4 21 }
snL4VirtualServerPortCfg OBJECT IDENTIFIER ::= { snL4 22 }
snL4RealServerStatistic OBJECT IDENTIFIER ::= { snL4 23 }
snL4RealServerPortStatistic OBJECT IDENTIFIER ::= { snL4 24 }
snL4VirtualServerStatistic OBJECT IDENTIFIER ::= { snL4 25 }
snL4VirtualServerPortStatistic OBJECT IDENTIFIER ::= { snL4 26 }
snL4GslbSiteRemoteServerIrons OBJECT IDENTIFIER ::= { snL4 27 }
snL4History OBJECT IDENTIFIER ::= { snL4 28 }
-- L4 General MIBs
snL4MaxSessionLimit OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"numbers of maximum session (L4 cache) entries"
::= { snL4Gen 1 }
snL4TcpSynLimit OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Numbers of connection per second"
::= { snL4Gen 2 }
-- Server load balancing
snL4slbGlobalSDAType OBJECT-TYPE
SYNTAX INTEGER {
leastconnection(1),
roundrobin(2),
weighted(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Global Session Distribution Algorithm(SDA)"
::= { snL4Gen 3 }
snL4slbTotalConnections OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total connections in this device"
::= { snL4Gen 4 }
snL4slbLimitExceeds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"exceeds snL4TCPSynLimit (numbers of connection per second)"
::= { snL4Gen 5 }
-- Server load balancing traffic info
snL4slbForwardTraffic OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Client->Server"
::= { snL4Gen 6 }
snL4slbReverseTraffic OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Server->Client"
::= { snL4Gen 7 }
snL4slbDrops OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4Gen 8 }
snL4slbDangling OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4Gen 9 }
snL4slbDisableCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4Gen 10 }
snL4slbAged OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4Gen 11 }
snL4slbFinished OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"FIN_or_RST"
::= { snL4Gen 12 }
-- Session
snL4FreeSessionCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum sessions - used sessions"
::= { snL4Gen 13 }
-- Hot stand-by
snL4BackupInterface OBJECT-TYPE
SYNTAX INTEGER (0..26)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"backup monitoring port"
::= { snL4Gen 14 }
snL4BackupMacAddr OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Associated MAC address for backup monitoring port"
::= { snL4Gen 15 }
snL4Active OBJECT-TYPE
SYNTAX L4Flag
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4Gen 16 }
snL4Redundancy OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4Gen 17 }
snL4Backup OBJECT-TYPE
SYNTAX L4Flag
ACCESS read-only
STATUS mandatory
DESCRIPTION
"true->StandBy,false->active"
::= { snL4Gen 18 }
snL4BecomeActive OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"How many times this device become active"
::= { snL4Gen 19 }
snL4BecomeStandBy OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"How many times this device become standby"
::= { snL4Gen 20 }
snL4BackupState OBJECT-TYPE
SYNTAX INTEGER {
slbSyncComplete(0),
slbSyncReqMap(1),
slbSyncreqMac(2),
slbSyncreqServers(3),
slbSyncReqL4(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Backup state"
::= { snL4Gen 21 }
snL4NoPDUSent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4Gen 22 }
snL4NoPDUCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4Gen 23 }
snL4NoPortMap OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4Gen 24 }
snL4unsuccessfulConn OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unsuccessfull connection"
::= { snL4Gen 25 }
snL4PingInterval OBJECT-TYPE
SYNTAX INTEGER (1..10)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ping retries interval"
DEFVAL { 2 }
::= { snL4Gen 26 }
snL4PingRetry OBJECT-TYPE
SYNTAX INTEGER (2..10)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ping retries attempts"
DEFVAL { 4 }
::= { snL4Gen 27 }
snL4TcpAge OBJECT-TYPE
SYNTAX INTEGER (2..60)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TCP reset age"
DEFVAL { 30 }
::= { snL4Gen 28 }
snL4UdpAge OBJECT-TYPE
SYNTAX INTEGER (2..60)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"UDP reset age"
DEFVAL { 5 }
::= { snL4Gen 29 }
-- Enable/disable L4 traps
snL4EnableMaxSessionLimitReachedTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable maximum number of connections reached trap."
::= { snL4Gen 30 }
snL4EnableTcpSynLimitReachedTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable the number of TCP SYN limits reached trap."
::= { snL4Gen 31 }
snL4EnableRealServerUpTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable the real server up trap."
::= { snL4Gen 32 }
snL4EnableRealServerDownTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable the real server down trap."
::= { snL4Gen 33 }
snL4EnableRealServerPortUpTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable the real server TCP port up trap."
::= { snL4Gen 34 }
snL4EnableRealServerPortDownTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable the real server TCP port down trap."
::= { snL4Gen 35 }
snL4EnableRealServerMaxConnLimitReachedTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable the real server maximum number of
connections reached trap."
::= { snL4Gen 36 }
snL4EnableBecomeStandbyTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable trap of the server load balancing
switch changes state from active to standby."
::= { snL4Gen 37 }
snL4EnableBecomeActiveTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable trap of the server load balancing
switch changes state from standby to active."
::= { snL4Gen 38 }
snL4slbRouterInterfacePortMask OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Router interface port mask.
(It was obsoleted after release 07100, replaced by snL4slbRouterInterfacePortList)"
::= { snL4Gen 39 }
------- Server Cache Group Global MIBs ----------
snL4MaxNumWebCacheGroup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of server cache groups"
::= { snL4Gen 40 }
snL4MaxNumWebCachePerGroup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of WEB Cache servers in each of web cache group"
::= { snL4Gen 41 }
snL4WebCacheStateful OBJECT-TYPE
SYNTAX L4Status
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The WEB Cache servers cache-stateful"
::= { snL4Gen 42 }
------- GSLB Group Global MIBs ----------
snL4EnableGslbHealthCheckIpUpTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Health check IP up."
::= { snL4Gen 43 }
snL4EnableGslbHealthCheckIpDownTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Health check IP down."
::= { snL4Gen 44 }
snL4EnableGslbHealthCheckIpPortUpTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Health check IP port up."
::= { snL4Gen 45 }
snL4EnableGslbHealthCheckIpPortDownTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Health check IP port down."
::= { snL4Gen 46 }
snL4EnableGslbRemoteGslbSiDownTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Connection to GSLB ServerIron is down."
::= { snL4Gen 47 }
snL4EnableGslbRemoteGslbSiUpTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Connection to GSLB ServerIron is up."
::= { snL4Gen 48 }
snL4EnableGslbRemoteSiDownTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"GSLB connection to remote ServerIron is down."
::= { snL4Gen 49 }
snL4EnableGslbRemoteSiUpTrap OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"GSLB connection to remote ServerIron is up."
::= { snL4Gen 50 }
snL4slbRouterInterfacePortList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Router interface port list. Each port index is a 16-bit integer
in big endian order. 8-bit is the slot number, the other 8-bit
is the port number."
::= { snL4Gen 51 }
-- Virtual Server table
snL4VirtualServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4VirtualServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Virtual Server table."
::= { snL4VirtualServer 1 }
snL4VirtualServerEntry OBJECT-TYPE
SYNTAX SnL4VirtualServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in L4 Virtual Server table."
INDEX { snL4VirtualServerIndex }
::= { snL4VirtualServerTable 1 }
SnL4VirtualServerEntry ::= SEQUENCE {
snL4VirtualServerIndex
INTEGER,
snL4VirtualServerName
L4ServerName,
snL4VirtualServerVirtualIP
IpAddress,
snL4VirtualServerAdminStatus
L4Status,
snL4VirtualServerSDAType
INTEGER,
snL4VirtualServerRowStatus
L4RowSts,
snL4VirtualServerDeleteState
L4DeleteState
}
snL4VirtualServerIndex OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a Virtual Server entry."
::= { snL4VirtualServerEntry 1 }
snL4VirtualServerName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Virtual server name."
::= { snL4VirtualServerEntry 2 }
snL4VirtualServerVirtualIP
OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Virtual Server IP Address."
::= { snL4VirtualServerEntry 3 }
snL4VirtualServerAdminStatus OBJECT-TYPE
SYNTAX L4Status
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Virtual Server status is ether disabled(0) or enabled(1)."
::= { snL4VirtualServerEntry 4 }
snL4VirtualServerSDAType OBJECT-TYPE
SYNTAX INTEGER {
default(0),
leastconnection(1),
roundrobin(2),
weighted(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TCP/UDP Sessions Distribution Algorithms Type."
::= { snL4VirtualServerEntry 5 }
snL4VirtualServerRowStatus OBJECT-TYPE
SYNTAX L4RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a virtual server
entry."
::= {snL4VirtualServerEntry 6 }
snL4VirtualServerDeleteState OBJECT-TYPE
SYNTAX L4DeleteState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Delete operation state."
::= { snL4VirtualServerEntry 7 }
-- Real Server table
snL4RealServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4RealServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Real Server table."
::= { snL4RealServer 1 }
snL4RealServerEntry OBJECT-TYPE
SYNTAX SnL4RealServerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Real Server table."
INDEX { snL4RealServerIndex }
::= { snL4RealServerTable 1 }
SnL4RealServerEntry ::= SEQUENCE {
snL4RealServerIndex
INTEGER,
snL4RealServerName
L4ServerName,
snL4RealServerIP
IpAddress,
snL4RealServerAdminStatus
L4Status,
snL4RealServerMaxConnections
INTEGER,
snL4RealServerWeight
INTEGER,
snL4RealServerRowStatus
L4RowSts,
snL4RealServerDeleteState
L4DeleteState
}
snL4RealServerIndex OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a Real Server entry."
::= { snL4RealServerEntry 1 }
snL4RealServerName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Real server name."
::= { snL4RealServerEntry 2 }
snL4RealServerIP
OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Real Server IP Address."
::= { snL4RealServerEntry 3 }
snL4RealServerAdminStatus OBJECT-TYPE
SYNTAX L4Status
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Real Server status is ether disabled(0) or enabled(1)."
::= { snL4RealServerEntry 4 }
snL4RealServerMaxConnections OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Real Server Maximum Connection allowed."
::= { snL4RealServerEntry 5 }
snL4RealServerWeight OBJECT-TYPE
SYNTAX INTEGER (0..65000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Real Server weight"
::= { snL4RealServerEntry 6 }
snL4RealServerRowStatus OBJECT-TYPE
SYNTAX L4RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a real server entry."
::= {snL4RealServerEntry 7 }
snL4RealServerDeleteState OBJECT-TYPE
SYNTAX L4DeleteState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Delete operation state."
::= { snL4RealServerEntry 8 }
-- Virtual Server Port table
snL4VirtualServerPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4VirtualServerPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Virtual Server Port table."
::= { snL4VirtualServerPort 1 }
snL4VirtualServerPortEntry OBJECT-TYPE
SYNTAX SnL4VirtualServerPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Virtual Server Port table."
INDEX { snL4VirtualServerPortIndex }
::= { snL4VirtualServerPortTable 1 }
SnL4VirtualServerPortEntry ::= SEQUENCE {
snL4VirtualServerPortIndex
INTEGER,
snL4VirtualServerPortServerName
L4ServerName,
snL4VirtualServerPortPort
INTEGER,
snL4VirtualServerPortAdminStatus
L4Status,
snL4VirtualServerPortSticky
INTEGER,
snL4VirtualServerPortConcurrent
INTEGER,
snL4VirtualServerPortRowStatus
L4RowSts,
snL4VirtualServerPortDeleteState
L4DeleteState
}
snL4VirtualServerPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..2048)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index for Virtual Server Port entry."
::= { snL4VirtualServerPortEntry 1 }
snL4VirtualServerPortServerName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortEntry 2 }
snL4VirtualServerPortPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortEntry 3 }
snL4VirtualServerPortAdminStatus OBJECT-TYPE
SYNTAX L4Status
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortEntry 4 }
snL4VirtualServerPortSticky OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortEntry 5 }
snL4VirtualServerPortConcurrent OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortEntry 6 }
snL4VirtualServerPortRowStatus OBJECT-TYPE
SYNTAX L4RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a virtual server port entry."
::= { snL4VirtualServerPortEntry 7 }
snL4VirtualServerPortDeleteState OBJECT-TYPE
SYNTAX L4DeleteState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Delete operation state."
::= { snL4VirtualServerPortEntry 8 }
-- Real Server Port table
snL4RealServerPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4RealServerPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Real Server Port table."
::= { snL4RealServerPort 1 }
snL4RealServerPortEntry OBJECT-TYPE
SYNTAX SnL4RealServerPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Real Server Port table."
INDEX { snL4RealServerPortIndex }
::= { snL4RealServerPortTable 1 }
SnL4RealServerPortEntry ::= SEQUENCE {
snL4RealServerPortIndex
INTEGER,
snL4RealServerPortServerName
L4ServerName,
snL4RealServerPortPort
INTEGER,
snL4RealServerPortAdminStatus
L4Status,
snL4RealServerPortRowStatus
L4RowSts,
snL4RealServerPortDeleteState
L4DeleteState
}
snL4RealServerPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..2048)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index for Real Server Port entry."
::= { snL4RealServerPortEntry 1 }
snL4RealServerPortServerName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerPortEntry 2 }
snL4RealServerPortPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerPortEntry 3 }
snL4RealServerPortAdminStatus OBJECT-TYPE
SYNTAX L4Status
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerPortEntry 4 }
snL4RealServerPortRowStatus OBJECT-TYPE
SYNTAX L4RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a Real server port entry."
::= { snL4RealServerPortEntry 5 }
snL4RealServerPortDeleteState OBJECT-TYPE
SYNTAX L4DeleteState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Delete operation state."
::= { snL4RealServerPortEntry 6 }
-- Bind table
snL4BindTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4BindEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Bind table."
::= { snL4Bind 1 }
snL4BindEntry OBJECT-TYPE
SYNTAX SnL4BindEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Bind table."
INDEX { snL4BindIndex }
::= { snL4BindTable 1 }
SnL4BindEntry ::= SEQUENCE {
snL4BindIndex
INTEGER,
snL4BindVirtualServerName
L4ServerName,
snL4BindVirtualPortNumber
INTEGER,
snL4BindRealServerName
L4ServerName,
snL4BindRealPortNumber
INTEGER,
snL4BindRowStatus
INTEGER
}
snL4BindIndex OBJECT-TYPE
SYNTAX INTEGER (1..2048)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index for Bind entry."
::= { snL4BindEntry 1 }
snL4BindVirtualServerName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snL4BindEntry 2 }
snL4BindVirtualPortNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snL4BindEntry 3 }
snL4BindRealServerName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snL4BindEntry 4 }
snL4BindRealPortNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snL4BindEntry 5 }
snL4BindRowStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
valid(2),
delete(3),
create(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete bind entry."
::= { snL4BindEntry 6 }
-- Virtual Server Status table
snL4VirtualServerStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4VirtualServerStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Virtual Server Status table."
::= { snL4VirtualServerStatus 1 }
snL4VirtualServerStatusEntry OBJECT-TYPE
SYNTAX SnL4VirtualServerStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in L4 Virtual Server Status table."
INDEX { snL4VirtualServerStatusIndex }
::= { snL4VirtualServerStatusTable 1 }
SnL4VirtualServerStatusEntry ::= SEQUENCE {
snL4VirtualServerStatusIndex
INTEGER,
snL4VirtualServerStatusName
L4ServerName,
snL4VirtualServerStatusReceivePkts
Counter,
snL4VirtualServerStatusTransmitPkts
Counter,
snL4VirtualServerStatusTotalConnections
Counter
}
snL4VirtualServerStatusIndex OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a Virtual Server Status entry."
::= { snL4VirtualServerStatusEntry 1 }
snL4VirtualServerStatusName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Virtual server name."
::= { snL4VirtualServerStatusEntry 2 }
snL4VirtualServerStatusReceivePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerStatusEntry 3 }
snL4VirtualServerStatusTransmitPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerStatusEntry 4 }
snL4VirtualServerStatusTotalConnections OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerStatusEntry 5 }
-- Real Server Status Table
snL4RealServerStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4RealServerStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Real Server Status table."
::= { snL4RealServerStatus 1 }
snL4RealServerStatusEntry OBJECT-TYPE
SYNTAX SnL4RealServerStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Real Server Status table."
INDEX { snL4RealServerStatusIndex }
::= { snL4RealServerStatusTable 1 }
SnL4RealServerStatusEntry ::= SEQUENCE {
snL4RealServerStatusIndex
INTEGER,
snL4RealServerStatusName
L4ServerName,
snL4RealServerStatusRealIP
IpAddress,
snL4RealServerStatusReceivePkts
Counter,
snL4RealServerStatusTransmitPkts
Counter,
snL4RealServerStatusCurConnections
INTEGER,
snL4RealServerStatusTotalConnections
Counter,
snL4RealServerStatusAge
INTEGER,
snL4RealServerStatusState
INTEGER,
snL4RealServerStatusReassignments
INTEGER,
snL4RealServerStatusReassignmentLimit
INTEGER,
snL4RealServerStatusFailedPortExists
INTEGER,
snL4RealServerStatusFailTime
INTEGER,
snL4RealServerStatusPeakConnections
INTEGER
}
snL4RealServerStatusIndex OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a Real Server Status entry."
::= { snL4RealServerStatusEntry 1 }
snL4RealServerStatusName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatusEntry 2 }
snL4RealServerStatusRealIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatusEntry 3 }
snL4RealServerStatusReceivePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatusEntry 4 }
snL4RealServerStatusTransmitPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatusEntry 5 }
snL4RealServerStatusCurConnections OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatusEntry 6 }
snL4RealServerStatusTotalConnections OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatusEntry 7 }
snL4RealServerStatusAge OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatusEntry 8 }
snL4RealServerStatusState OBJECT-TYPE
SYNTAX INTEGER {
serverdisabled(0),
serverenabled(1),
serverfailed(2),
servertesting(3),
serversuspect(4),
servershutdown(5),
serveractive(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatusEntry 9 }
snL4RealServerStatusReassignments OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatusEntry 10 }
snL4RealServerStatusReassignmentLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatusEntry 11 }
snL4RealServerStatusFailedPortExists OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatusEntry 12 }
snL4RealServerStatusFailTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatusEntry 13 }
snL4RealServerStatusPeakConnections OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatusEntry 14 }
-- Virtual Server Port Status table
snL4VirtualServerPortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4VirtualServerPortStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Virtual Server Port Status table."
::= { snL4VirtualServerPortStatus 1 }
snL4VirtualServerPortStatusEntry OBJECT-TYPE
SYNTAX SnL4VirtualServerPortStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Virtual Server Port Status table."
INDEX { snL4VirtualServerPortStatusIndex }
::= { snL4VirtualServerPortStatusTable 1 }
SnL4VirtualServerPortStatusEntry ::= SEQUENCE {
snL4VirtualServerPortStatusIndex
INTEGER,
snL4VirtualServerPortStatusPort
INTEGER,
snL4VirtualServerPortStatusServerName
L4ServerName,
snL4VirtualServerPortStatusCurrentConnection
INTEGER,
snL4VirtualServerPortStatusTotalConnection
Counter,
snL4VirtualServerPortStatusPeakConnection
INTEGER
}
snL4VirtualServerPortStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index for Virtual Server Port Status entry."
::= { snL4VirtualServerPortStatusEntry 1 }
snL4VirtualServerPortStatusPort OBJECT-TYPE
SYNTAX INTEGER (1..2048)
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortStatusEntry 2 }
snL4VirtualServerPortStatusServerName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortStatusEntry 3 }
snL4VirtualServerPortStatusCurrentConnection OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortStatusEntry 4 }
snL4VirtualServerPortStatusTotalConnection OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortStatusEntry 5 }
snL4VirtualServerPortStatusPeakConnection OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortStatusEntry 6 }
-- Real Server Port Status table
snL4RealServerPortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4RealServerPortStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Real Server Port Status table."
::= { snL4RealServerPortStatus 1 }
snL4RealServerPortStatusEntry OBJECT-TYPE
SYNTAX SnL4RealServerPortStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Real Server Port Status table."
INDEX { snL4RealServerPortStatusIndex }
::= { snL4RealServerPortStatusTable 1 }
SnL4RealServerPortStatusEntry ::= SEQUENCE {
snL4RealServerPortStatusIndex
INTEGER,
snL4RealServerPortStatusPort
INTEGER,
snL4RealServerPortStatusServerName
L4ServerName,
snL4RealServerPortStatusReassignCount
INTEGER,
snL4RealServerPortStatusState
INTEGER,
snL4RealServerPortStatusFailTime
INTEGER,
snL4RealServerPortStatusCurrentConnection
INTEGER,
snL4RealServerPortStatusTotalConnection
Counter,
snL4RealServerPortStatusRxPkts
Counter,
snL4RealServerPortStatusTxPkts
Counter,
snL4RealServerPortStatusRxBytes
Counter,
snL4RealServerPortStatusTxBytes
Counter,
snL4RealServerPortStatusPeakConnection
INTEGER
}
snL4RealServerPortStatusIndex OBJECT-TYPE
SYNTAX INTEGER (1..2048)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index for Real Server Port Status entry."
::= { snL4RealServerPortStatusEntry 1 }
snL4RealServerPortStatusPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerPortStatusEntry 2 }
snL4RealServerPortStatusServerName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerPortStatusEntry 3 }
snL4RealServerPortStatusReassignCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerPortStatusEntry 4 }
snL4RealServerPortStatusState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1),
failed(2),
testing(3),
suspect(4),
shutdown(5),
active(6),
unbound(7),
awaitUnbind(8),
awaitDelete(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Real server port state"
::= { snL4RealServerPortStatusEntry 5 }
snL4RealServerPortStatusFailTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Only useful, if real server port state is failed.
Indicating how seconds has been elapsed from the last retry."
::= { snL4RealServerPortStatusEntry 6 }
snL4RealServerPortStatusCurrentConnection OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Real server port current connection"
::= { snL4RealServerPortStatusEntry 7 }
snL4RealServerPortStatusTotalConnection OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Real server port total connection"
::= { snL4RealServerPortStatusEntry 8 }
snL4RealServerPortStatusRxPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Real server port receive packets."
::= { snL4RealServerPortStatusEntry 9 }
snL4RealServerPortStatusTxPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Real server port transmit packets."
::= { snL4RealServerPortStatusEntry 10 }
snL4RealServerPortStatusRxBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Real server port receive bytes."
::= { snL4RealServerPortStatusEntry 11 }
snL4RealServerPortStatusTxBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Real server port transmit bytes."
::= { snL4RealServerPortStatusEntry 12 }
snL4RealServerPortStatusPeakConnection OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"peak connection for real server port."
::= { snL4RealServerPortStatusEntry 13 }
-- L4 policy table
snL4PolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4PolicyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"L4 policy table."
::= {snL4Policy 1 }
snL4PolicyEntry OBJECT-TYPE
SYNTAX SnL4PolicyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the L4 policy table."
INDEX { snL4PolicyId }
::= { snL4PolicyTable 1 }
SnL4PolicyEntry ::= SEQUENCE {
snL4PolicyId
INTEGER,
snL4PolicyPriority
INTEGER,
snL4PolicyScope
INTEGER,
snL4PolicyProtocol
INTEGER,
snL4PolicyPort
INTEGER,
snL4PolicyRowStatus
INTEGER
}
snL4PolicyId OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID to identify a entry."
::= { snL4PolicyEntry 1 }
snL4PolicyPriority OBJECT-TYPE
SYNTAX INTEGER {
level0(0),
level1(1),
level2(2),
level3(3),
level4(4),
level5(5),
level6(6),
level7(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Stand alone stackable switch L4 Policy Priority values are:
normal(0) -- normal prority
high(1) -- high prority
cache(2) -- prority for cache
transparent(3) -- prority for transparent
The BigIron switch L4 Priority values are:
level0(0), level1(1), level2(2), level3(3),
level4(4), level5(5), level6(6), level7(7) "
::= { snL4PolicyEntry 2 }
snL4PolicyScope OBJECT-TYPE
SYNTAX INTEGER { global(0), local(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Scope of the local or global.
Global automatic apply to all port.
Local apply to a port."
::= { snL4PolicyEntry 3 }
snL4PolicyProtocol OBJECT-TYPE
SYNTAX INTEGER { udp(0), tcp(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snL4PolicyEntry 4 }
snL4PolicyPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION ""
::= { snL4PolicyEntry 5 }
snL4PolicyRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative.
valid(2).....the row exists and is valid"
::= { snL4PolicyEntry 6 }
-- L4 policy port access table
snL4PolicyPortAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4PolicyPortAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"ip interface L4 policy access table."
::= {snL4PolicyPortAccess 1}
snL4PolicyPortAccessEntry OBJECT-TYPE
SYNTAX SnL4PolicyPortAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of the ip interface L4 policy access table."
INDEX { snL4PolicyPortAccessPort }
::= { snL4PolicyPortAccessTable 1 }
SnL4PolicyPortAccessEntry ::= SEQUENCE {
snL4PolicyPortAccessPort
INTEGER,
snL4PolicyPortAccessList
OCTET STRING,
snL4PolicyPortAccessRowStatus
INTEGER
}
snL4PolicyPortAccessPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ip interface to which the L4 policy applies."
::= { snL4PolicyPortAccessEntry 1 }
snL4PolicyPortAccessList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An ip L4 policy list, of which each octet contains
a ID number that forms a group of s. A
valid entry in the snL4PolicyTable with the
corresponding ID number (i.e. snL4PolicyId)
must have been created before a list is initialized."
::= { snL4PolicyPortAccessEntry 2 }
snL4PolicyPortAccessRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative.
valid(2).....the row exists and is valid"
::= { snL4PolicyPortAccessEntry 3 }
-- L4 trap variable binding objects
snL4TrapRealServerIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Real server IP address."
::= { snL4Trap 1 }
snL4TrapRealServerName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Real server name."
::= { snL4Trap 2 }
snL4TrapRealServerPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Transport protocol port number of the real server."
::= { snL4Trap 3 }
snL4TrapRealServerCurConnections OBJECT-TYPE
SYNTAX INTEGER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Real Server current connections."
::= { snL4Trap 4 }
-- Web Cache table
snL4WebCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4WebCacheEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Real Server table."
::= { snL4WebCache 1 }
snL4WebCacheEntry OBJECT-TYPE
SYNTAX SnL4WebCacheEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Real Server table."
INDEX { snL4WebCacheIP }
::= { snL4WebCacheTable 1 }
SnL4WebCacheEntry ::= SEQUENCE {
snL4WebCacheIP
IpAddress,
snL4WebCacheName
L4ServerName,
snL4WebCacheAdminStatus
L4Status,
snL4WebCacheMaxConnections
INTEGER,
snL4WebCacheWeight
INTEGER,
snL4WebCacheRowStatus
L4RowSts,
snL4WebCacheDeleteState
L4DeleteState
}
snL4WebCacheIP
OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Real Server IP Address."
::= { snL4WebCacheEntry 1 }
snL4WebCacheName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Real server name."
::= { snL4WebCacheEntry 2 }
snL4WebCacheAdminStatus OBJECT-TYPE
SYNTAX L4Status
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Real Server status is ether disabled(0) or enabled(1)."
::= { snL4WebCacheEntry 3 }
snL4WebCacheMaxConnections OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Real Server Maximum Connection allowed."
::= { snL4WebCacheEntry 4 }
snL4WebCacheWeight OBJECT-TYPE
SYNTAX INTEGER (1..65000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Real Server weight"
::= { snL4WebCacheEntry 5 }
snL4WebCacheRowStatus OBJECT-TYPE
SYNTAX L4RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a real server entry."
::= {snL4WebCacheEntry 6 }
snL4WebCacheDeleteState OBJECT-TYPE
SYNTAX L4DeleteState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Delete operation state."
::= { snL4WebCacheEntry 7 }
-- Web Cache Group table
snL4WebCacheGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4WebCacheGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Web Cache Group table."
::= { snL4WebCacheGroup 1 }
snL4WebCacheGroupEntry OBJECT-TYPE
SYNTAX SnL4WebCacheGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Web Cache Group table."
INDEX { snL4WebCacheGroupId }
::= { snL4WebCacheGroupTable 1 }
SnL4WebCacheGroupEntry ::= SEQUENCE {
snL4WebCacheGroupId
INTEGER,
snL4WebCacheGroupName
L4ServerName,
snL4WebCacheGroupWebCacheIpList
OCTET STRING,
snL4WebCacheGroupDestMask
IpAddress,
snL4WebCacheGroupSrcMask
IpAddress,
snL4WebCacheGroupAdminStatus
INTEGER,
snL4WebCacheGroupRowStatus
L4RowSts
}
snL4WebCacheGroupId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The identification for a Web Cache Group entry.
The limit is from 1 to snL4MaxNumWebCacheGroup."
::= { snL4WebCacheGroupEntry 1 }
snL4WebCacheGroupName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Web Cache Group name."
::= { snL4WebCacheGroupEntry 2 }
snL4WebCacheGroupWebCacheIpList
OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A list of the Server Cache Group Real Server IP Address.
The number of IP Address is from 1 (4 OCTETs) to the
snL4MaxNumServersPerWebCacheGroup, maximum number of
server IP Address allowed in the list."
::= { snL4WebCacheGroupEntry 3 }
snL4WebCacheGroupDestMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Cache Server Group Destination Mask."
::= { snL4WebCacheGroupEntry 4 }
snL4WebCacheGroupSrcMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Cache Server Group Source Mask."
::= { snL4WebCacheGroupEntry 5 }
snL4WebCacheGroupAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The WEB Cache Group is set either
enabled(1)...........activated.
disabled(0)..........disabled."
::= { snL4WebCacheGroupEntry 6 }
snL4WebCacheGroupRowStatus OBJECT-TYPE
SYNTAX L4RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a Web Cache Group entry."
::= { snL4WebCacheGroupEntry 7 }
-- Web Cache Traffic Statistics Table
snL4WebCacheTrafficStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4WebCacheTrafficStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Web Cache Traffic Statistics table."
::= { snL4WebCacheTrafficStats 1 }
snL4WebCacheTrafficStatsEntry OBJECT-TYPE
SYNTAX SnL4WebCacheTrafficStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Web Cache Traffic Statistics table."
INDEX { snL4WebCacheTrafficIp , snL4WebCacheTrafficPort}
::= { snL4WebCacheTrafficStatsTable 1 }
SnL4WebCacheTrafficStatsEntry ::= SEQUENCE {
snL4WebCacheTrafficIp
IpAddress,
snL4WebCacheTrafficPort
INTEGER,
snL4WebCacheCurrConnections
INTEGER,
snL4WebCacheTotalConnections
INTEGER,
snL4WebCacheTxPkts
Counter,
snL4WebCacheRxPkts
Counter,
snL4WebCacheTxOctets
Counter,
snL4WebCacheRxOctets
Counter,
snL4WebCachePortState
WebCacheState
}
snL4WebCacheTrafficIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Server IP Address."
::= { snL4WebCacheTrafficStatsEntry 1 }
snL4WebCacheTrafficPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The WEB Cache port is one of the protocol port such as UDP, TCP etc."
::= { snL4WebCacheTrafficStatsEntry 2 }
snL4WebCacheCurrConnections OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of the current connections in WEB Cache group."
::= { snL4WebCacheTrafficStatsEntry 3 }
snL4WebCacheTotalConnections OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total connections in WEB Cache group."
::= { snL4WebCacheTrafficStatsEntry 4 }
snL4WebCacheTxPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of the Packets sending from Client/Web-Server to Cache Server"
::= { snL4WebCacheTrafficStatsEntry 5 }
snL4WebCacheRxPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of the Packets sending from Cache Server to Client/Web-Server"
::= { snL4WebCacheTrafficStatsEntry 6 }
snL4WebCacheTxOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of the Octets sending from Client/Web-Server to Cache Server"
::= { snL4WebCacheTrafficStatsEntry 7 }
snL4WebCacheRxOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of the Octets sending from Cache Server to Client/Web-Server"
::= { snL4WebCacheTrafficStatsEntry 8 }
snL4WebCachePortState OBJECT-TYPE
SYNTAX WebCacheState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Web Cache Port state."
::= { snL4WebCacheTrafficStatsEntry 9 }
-- Web Uncached Traffic Statistics Table
snL4WebUncachedTrafficStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4WebUncachedTrafficStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Web Uncached Traffic Statistics table."
::= { snL4WebUncachedTrafficStats 1 }
snL4WebUncachedTrafficStatsEntry OBJECT-TYPE
SYNTAX SnL4WebUncachedTrafficStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Web Uncached Traffic Statistics table."
INDEX { snL4WebServerPort, snL4WebClientPort }
::= { snL4WebUncachedTrafficStatsTable 1 }
SnL4WebUncachedTrafficStatsEntry ::= SEQUENCE {
snL4WebServerPort
INTEGER,
snL4WebClientPort
INTEGER,
snL4WebUncachedTxPkts
Counter,
snL4WebUncachedRxPkts
Counter,
snL4WebUncachedTxOctets
Counter,
snL4WebUncachedRxOctets
Counter,
snL4WebServerPortName
DisplayString,
snL4WebClientPortName
DisplayString
}
snL4WebServerPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Web Server Port."
::= { snL4WebUncachedTrafficStatsEntry 1 }
snL4WebClientPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Web Client Port."
::= { snL4WebUncachedTrafficStatsEntry 2 }
snL4WebUncachedTxPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of the Packets sending from Client port to Web Server port"
::= { snL4WebUncachedTrafficStatsEntry 3 }
snL4WebUncachedRxPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of the Packets sending from Web Server port to Client port"
::= { snL4WebUncachedTrafficStatsEntry 4 }
snL4WebUncachedTxOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of the Octets sending from Client port to Web Server port"
::= { snL4WebUncachedTrafficStatsEntry 5 }
snL4WebUncachedRxOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of the Octets sending from Web Server port to Client port"
::= { snL4WebUncachedTrafficStatsEntry 6 }
snL4WebServerPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Web Server Port Name string."
::= { snL4WebUncachedTrafficStatsEntry 7 }
snL4WebClientPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Web Client Port Name string."
::= { snL4WebUncachedTrafficStatsEntry 8 }
-- Web Cache Server Port table
snL4WebCachePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4WebCachePortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Real Server Port table."
::= { snL4WebCachePort 1 }
snL4WebCachePortEntry OBJECT-TYPE
SYNTAX SnL4WebCachePortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Real Server Port table."
INDEX { snL4WebCachePortServerIp, snL4WebCachePortPort }
::= { snL4WebCachePortTable 1 }
SnL4WebCachePortEntry ::= SEQUENCE {
snL4WebCachePortServerIp
IpAddress,
snL4WebCachePortPort
INTEGER,
snL4WebCachePortAdminStatus
L4Status,
snL4WebCachePortRowStatus
L4RowSts,
snL4WebCachePortDeleteState
L4DeleteState
}
snL4WebCachePortServerIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Cache Server IP Address."
::= { snL4WebCachePortEntry 1 }
snL4WebCachePortPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The WEB Cache port is one of the protocol port such as UDP, TCP etc."
::= { snL4WebCachePortEntry 2 }
snL4WebCachePortAdminStatus OBJECT-TYPE
SYNTAX L4Status
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snL4WebCachePortEntry 3 }
snL4WebCachePortRowStatus OBJECT-TYPE
SYNTAX L4RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a Real server port entry."
::= { snL4WebCachePortEntry 4 }
snL4WebCachePortDeleteState OBJECT-TYPE
SYNTAX L4DeleteState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Delete operation state."
::= { snL4WebCachePortEntry 5 }
-- Real Server Configuration table
snL4RealServerCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4RealServerCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Real Server table."
::= { snL4RealServerCfg 1 }
snL4RealServerCfgEntry OBJECT-TYPE
SYNTAX SnL4RealServerCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Real Server table."
INDEX { snL4RealServerCfgIP }
::= { snL4RealServerCfgTable 1 }
SnL4RealServerCfgEntry ::= SEQUENCE {
snL4RealServerCfgIP
IpAddress,
snL4RealServerCfgName
L4ServerName,
snL4RealServerCfgAdminStatus
L4Status,
snL4RealServerCfgMaxConnections
INTEGER,
snL4RealServerCfgWeight
INTEGER,
snL4RealServerCfgRowStatus
L4RowSts,
snL4RealServerCfgDeleteState
L4DeleteState
}
snL4RealServerCfgIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Real Server IP Address."
::= { snL4RealServerCfgEntry 1 }
snL4RealServerCfgName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Real server name."
::= { snL4RealServerCfgEntry 2 }
snL4RealServerCfgAdminStatus OBJECT-TYPE
SYNTAX L4Status
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Real Server status is ether disabled(0) or enabled(1)."
::= { snL4RealServerCfgEntry 3 }
snL4RealServerCfgMaxConnections OBJECT-TYPE
SYNTAX INTEGER (0..1000000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Real Server Maximum Connection allowed."
::= { snL4RealServerCfgEntry 4 }
snL4RealServerCfgWeight OBJECT-TYPE
SYNTAX INTEGER (0..65000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Real Server weight"
::= { snL4RealServerCfgEntry 5 }
snL4RealServerCfgRowStatus OBJECT-TYPE
SYNTAX L4RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a real server entry."
::= {snL4RealServerCfgEntry 6 }
snL4RealServerCfgDeleteState OBJECT-TYPE
SYNTAX L4DeleteState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Delete operation state."
::= { snL4RealServerCfgEntry 7 }
-- Real Server Port Statistic table
snL4RealServerPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4RealServerPortCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Real Server Port table."
::= { snL4RealServerPortCfg 1 }
snL4RealServerPortCfgEntry OBJECT-TYPE
SYNTAX SnL4RealServerPortCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Real Server Port table."
INDEX {snL4RealServerPortCfgIP,snL4RealServerPortCfgPort }
::= { snL4RealServerPortCfgTable 1 }
SnL4RealServerPortCfgEntry ::= SEQUENCE {
snL4RealServerPortCfgIP
IpAddress,
snL4RealServerPortCfgPort
INTEGER,
snL4RealServerPortCfgServerName
L4ServerName,
snL4RealServerPortCfgAdminStatus
L4Status,
snL4RealServerPortCfgRowStatus
L4RowSts,
snL4RealServerPortCfgDeleteState
L4DeleteState
}
snL4RealServerPortCfgIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address for the Real Server ."
::= { snL4RealServerPortCfgEntry 1 }
snL4RealServerPortCfgPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerPortCfgEntry 3 }
snL4RealServerPortCfgServerName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerPortCfgEntry 2 }
snL4RealServerPortCfgAdminStatus OBJECT-TYPE
SYNTAX L4Status
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerPortCfgEntry 4 }
snL4RealServerPortCfgRowStatus OBJECT-TYPE
SYNTAX L4RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a Real server port entry."
::= { snL4RealServerPortCfgEntry 5 }
snL4RealServerPortCfgDeleteState OBJECT-TYPE
SYNTAX L4DeleteState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Delete operation state."
::= { snL4RealServerPortCfgEntry 6 }
-- Virtual Server Configuration table
snL4VirtualServerCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4VirtualServerCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Virtual Server table."
::= { snL4VirtualServerCfg 1 }
snL4VirtualServerCfgEntry OBJECT-TYPE
SYNTAX SnL4VirtualServerCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in L4 Virtual Server table."
INDEX {snL4VirtualServerCfgVirtualIP }
::= { snL4VirtualServerCfgTable 1 }
SnL4VirtualServerCfgEntry ::= SEQUENCE {
snL4VirtualServerCfgVirtualIP
IpAddress,
snL4VirtualServerCfgName
L4ServerName,
snL4VirtualServerCfgAdminStatus
L4Status,
snL4VirtualServerCfgSDAType
INTEGER,
snL4VirtualServerCfgRowStatus
L4RowSts,
snL4VirtualServerCfgDeleteState
L4DeleteState
}
snL4VirtualServerCfgVirtualIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Virtual Server IP Address."
::= { snL4VirtualServerCfgEntry 1 }
snL4VirtualServerCfgName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Virtual server name."
::= { snL4VirtualServerCfgEntry 2 }
snL4VirtualServerCfgAdminStatus OBJECT-TYPE
SYNTAX L4Status
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Virtual Server status is ether disabled(0) or enabled(1)."
::= { snL4VirtualServerCfgEntry 3 }
snL4VirtualServerCfgSDAType OBJECT-TYPE
SYNTAX INTEGER {
default(0),
leastconnection(1),
roundrobin(2),
weighted(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TCP/UDP Sessions Distribution Algorithms Type."
::= { snL4VirtualServerCfgEntry 4 }
snL4VirtualServerCfgRowStatus OBJECT-TYPE
SYNTAX L4RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a virtual server
entry."
::= {snL4VirtualServerCfgEntry 5 }
snL4VirtualServerCfgDeleteState OBJECT-TYPE
SYNTAX L4DeleteState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Delete operation state."
::= { snL4VirtualServerCfgEntry 6 }
-- Virtual Server Port Configuration table
snL4VirtualServerPortCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4VirtualServerPortCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Virtual Server Port table."
::= { snL4VirtualServerPortCfg 1 }
snL4VirtualServerPortCfgEntry OBJECT-TYPE
SYNTAX SnL4VirtualServerPortCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Virtual Server Port table."
INDEX {snL4VirtualServerPortCfgIP, snL4VirtualServerPortCfgPort }
::= { snL4VirtualServerPortCfgTable 1 }
SnL4VirtualServerPortCfgEntry ::= SEQUENCE {
snL4VirtualServerPortCfgIP
IpAddress,
snL4VirtualServerPortCfgPort
INTEGER,
snL4VirtualServerPortCfgServerName
L4ServerName,
snL4VirtualServerPortCfgAdminStatus
L4Status,
snL4VirtualServerPortCfgSticky
INTEGER,
snL4VirtualServerPortCfgConcurrent
INTEGER,
snL4VirtualServerPortCfgRowStatus
L4RowSts,
snL4VirtualServerPortCfgDeleteState
L4DeleteState
}
snL4VirtualServerPortCfgIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Virtual Server IP Address."
::= { snL4VirtualServerPortCfgEntry 1 }
snL4VirtualServerPortCfgPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortCfgEntry 2 }
snL4VirtualServerPortCfgServerName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortCfgEntry 3 }
snL4VirtualServerPortCfgAdminStatus OBJECT-TYPE
SYNTAX L4Status
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortCfgEntry 4 }
snL4VirtualServerPortCfgSticky OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortCfgEntry 5 }
snL4VirtualServerPortCfgConcurrent OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortCfgEntry 6 }
snL4VirtualServerPortCfgRowStatus OBJECT-TYPE
SYNTAX L4RowSts
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a virtual server port entry."
::= { snL4VirtualServerPortCfgEntry 7 }
snL4VirtualServerPortCfgDeleteState OBJECT-TYPE
SYNTAX L4DeleteState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Delete operation state."
::= { snL4VirtualServerPortCfgEntry 8 }
-- Virtual Server Statistic table
snL4VirtualServerStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4VirtualServerStatisticEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Virtual Server Statistic table."
::= { snL4VirtualServerStatistic 1 }
snL4VirtualServerStatisticEntry OBJECT-TYPE
SYNTAX SnL4VirtualServerStatisticEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in L4 Virtual Server Statistic table."
INDEX {snL4VirtualServerStatisticIP }
::= { snL4VirtualServerStatisticTable 1 }
SnL4VirtualServerStatisticEntry ::= SEQUENCE {
snL4VirtualServerStatisticIP
IpAddress,
snL4VirtualServerStatisticName
L4ServerName,
snL4VirtualServerStatisticReceivePkts
Counter,
snL4VirtualServerStatisticTransmitPkts
Counter,
snL4VirtualServerStatisticTotalConnections
Counter,
snL4VirtualServerStatisticReceiveBytes
Counter64,
snL4VirtualServerStatisticTransmitBytes
Counter64,
snL4VirtualServerStatisticSymmetricState
INTEGER,
snL4VirtualServerStatisticSymmetricPriority
INTEGER,
snL4VirtualServerStatisticSymmetricKeep
INTEGER,
snL4VirtualServerStatisticSymmetricActivates
Counter,
snL4VirtualServerStatisticSymmetricInactives
Counter,
snL4VirtualServerStatisticSymmetricBestStandbyMacAddr
PhysAddress,
snL4VirtualServerStatisticSymmetricActiveMacAddr
PhysAddress
}
snL4VirtualServerStatisticIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a Virtual Server Statistic entry."
::= { snL4VirtualServerStatisticEntry 1 }
snL4VirtualServerStatisticName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Virtual server name."
::= { snL4VirtualServerStatisticEntry 2 }
snL4VirtualServerStatisticReceivePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerStatisticEntry 3 }
snL4VirtualServerStatisticTransmitPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerStatisticEntry 4 }
snL4VirtualServerStatisticTotalConnections OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerStatisticEntry 5 }
snL4VirtualServerStatisticReceiveBytes OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerStatisticEntry 6 }
snL4VirtualServerStatisticTransmitBytes OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerStatisticEntry 7 }
snL4VirtualServerStatisticSymmetricState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerStatisticEntry 8 }
snL4VirtualServerStatisticSymmetricPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerStatisticEntry 9 }
snL4VirtualServerStatisticSymmetricKeep OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerStatisticEntry 10 }
snL4VirtualServerStatisticSymmetricActivates OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerStatisticEntry 11 }
snL4VirtualServerStatisticSymmetricInactives OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerStatisticEntry 12 }
snL4VirtualServerStatisticSymmetricBestStandbyMacAddr OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerStatisticEntry 13 }
snL4VirtualServerStatisticSymmetricActiveMacAddr OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerStatisticEntry 14 }
-- Real Server Statistic Table
snL4RealServerStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4RealServerStatisticEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Real Server Statistic table."
::= { snL4RealServerStatistic 1 }
snL4RealServerStatisticEntry OBJECT-TYPE
SYNTAX SnL4RealServerStatisticEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Real Server Statistic table."
INDEX {snL4RealServerStatisticRealIP }
::= { snL4RealServerStatisticTable 1 }
SnL4RealServerStatisticEntry ::= SEQUENCE {
snL4RealServerStatisticRealIP
IpAddress,
snL4RealServerStatisticName
L4ServerName,
snL4RealServerStatisticReceivePkts
Counter,
snL4RealServerStatisticTransmitPkts
Counter,
snL4RealServerStatisticCurConnections
INTEGER,
snL4RealServerStatisticTotalConnections
Counter,
snL4RealServerStatisticAge
INTEGER,
snL4RealServerStatisticState
INTEGER,
snL4RealServerStatisticReassignments
INTEGER,
snL4RealServerStatisticReassignmentLimit
INTEGER,
snL4RealServerStatisticFailedPortExists
INTEGER,
snL4RealServerStatisticFailTime
INTEGER,
snL4RealServerStatisticPeakConnections
INTEGER
}
snL4RealServerStatisticRealIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatisticEntry 1 }
snL4RealServerStatisticName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatisticEntry 2 }
snL4RealServerStatisticReceivePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatisticEntry 3 }
snL4RealServerStatisticTransmitPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatisticEntry 4 }
snL4RealServerStatisticCurConnections OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatisticEntry 5 }
snL4RealServerStatisticTotalConnections OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatisticEntry 6 }
snL4RealServerStatisticAge OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatisticEntry 7 }
snL4RealServerStatisticState OBJECT-TYPE
SYNTAX INTEGER {
serverdisabled(0),
serverenabled(1),
serverfailed(2),
servertesting(3),
serversuspect(4),
servershutdown(5),
serveractive(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatisticEntry 8 }
snL4RealServerStatisticReassignments OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatisticEntry 9 }
snL4RealServerStatisticReassignmentLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatisticEntry 10 }
snL4RealServerStatisticFailedPortExists OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatisticEntry 11 }
snL4RealServerStatisticFailTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatisticEntry 12 }
snL4RealServerStatisticPeakConnections OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerStatisticEntry 13 }
-- Virtual Server Port Statistic table
snL4VirtualServerPortStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4VirtualServerPortStatisticEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Virtual Server Port Statistic table."
::= { snL4VirtualServerPortStatistic 1 }
snL4VirtualServerPortStatisticEntry OBJECT-TYPE
SYNTAX SnL4VirtualServerPortStatisticEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Virtual Server Port Statistic table."
INDEX { snL4VirtualServerPortStatisticIP,snL4VirtualServerPortStatisticPort }
::= { snL4VirtualServerPortStatisticTable 1 }
SnL4VirtualServerPortStatisticEntry ::= SEQUENCE {
snL4VirtualServerPortStatisticIP
IpAddress,
snL4VirtualServerPortStatisticPort
INTEGER,
snL4VirtualServerPortStatisticServerName
L4ServerName,
snL4VirtualServerPortStatisticCurrentConnection
INTEGER,
snL4VirtualServerPortStatisticTotalConnection
Counter,
snL4VirtualServerPortStatisticPeakConnection
INTEGER
}
snL4VirtualServerPortStatisticIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index for Virtual Server Port Statistic entry."
::= { snL4VirtualServerPortStatisticEntry 1 }
snL4VirtualServerPortStatisticPort OBJECT-TYPE
SYNTAX INTEGER (1..2048)
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortStatisticEntry 2 }
snL4VirtualServerPortStatisticServerName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortStatisticEntry 3 }
snL4VirtualServerPortStatisticCurrentConnection OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortStatisticEntry 4 }
snL4VirtualServerPortStatisticTotalConnection OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortStatisticEntry 5 }
snL4VirtualServerPortStatisticPeakConnection OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortStatisticEntry 6 }
-- Real Server Port Statistic table
snL4RealServerPortStatisticTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4RealServerPortStatisticEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Real Server Port Statistic table."
::= { snL4RealServerPortStatistic 1 }
snL4RealServerPortStatisticEntry OBJECT-TYPE
SYNTAX SnL4RealServerPortStatisticEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Real Server Port Statistic table."
INDEX { snL4RealServerPortStatisticIP,snL4RealServerPortStatisticPort }
::= { snL4RealServerPortStatisticTable 1 }
SnL4RealServerPortStatisticEntry ::= SEQUENCE {
snL4RealServerPortStatisticIP
IpAddress,
snL4RealServerPortStatisticPort
INTEGER,
snL4RealServerPortStatisticServerName
L4ServerName,
snL4RealServerPortStatisticReassignCount
INTEGER,
snL4RealServerPortStatisticState
INTEGER,
snL4RealServerPortStatisticFailTime
INTEGER,
snL4RealServerPortStatisticCurrentConnection
INTEGER,
snL4RealServerPortStatisticTotalConnection
Counter,
snL4RealServerPortStatisticRxPkts
Counter,
snL4RealServerPortStatisticTxPkts
Counter,
snL4RealServerPortStatisticRxBytes
Counter,
snL4RealServerPortStatisticTxBytes
Counter,
snL4RealServerPortStatisticPeakConnection
INTEGER
}
snL4RealServerPortStatisticIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index for Real Server Port Statistic entry."
::= { snL4RealServerPortStatisticEntry 1 }
snL4RealServerPortStatisticPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerPortStatisticEntry 2 }
snL4RealServerPortStatisticServerName OBJECT-TYPE
SYNTAX L4ServerName
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerPortStatisticEntry 3 }
snL4RealServerPortStatisticReassignCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerPortStatisticEntry 4 }
snL4RealServerPortStatisticState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1),
failed(2),
testing(3),
suspect(4),
shutdown(5),
active(6),
unbound(7),
awaitUnbind(8),
awaitDelete(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Real server port state"
::= { snL4RealServerPortStatisticEntry 5 }
snL4RealServerPortStatisticFailTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Only useful, if real server port state is failed.
Indicating how seconds has been elapsed from the last retry."
::= { snL4RealServerPortStatisticEntry 6 }
snL4RealServerPortStatisticCurrentConnection OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Real server port current connection"
::= { snL4RealServerPortStatisticEntry 7 }
snL4RealServerPortStatisticTotalConnection OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Real server port total connection"
::= { snL4RealServerPortStatisticEntry 8 }
snL4RealServerPortStatisticRxPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Real server port receive packets."
::= { snL4RealServerPortStatisticEntry 9 }
snL4RealServerPortStatisticTxPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Real server port transmit packets."
::= { snL4RealServerPortStatisticEntry 10 }
snL4RealServerPortStatisticRxBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Real server port receive bytes."
::= { snL4RealServerPortStatisticEntry 11 }
snL4RealServerPortStatisticTxBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Real server port transmit bytes."
::= { snL4RealServerPortStatisticEntry 12 }
snL4RealServerPortStatisticPeakConnection OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"peak connection for real server port."
::= { snL4RealServerPortStatisticEntry 13 }
-- GSLB Site Remote ServerIron Configuration table
snL4GslbSiteRemoteServerIronTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4GslbSiteRemoteServerIronEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"GSLB remote ServerIron configuration table."
::= { snL4GslbSiteRemoteServerIrons 1 }
snL4GslbSiteRemoteServerIronEntry OBJECT-TYPE
SYNTAX SnL4GslbSiteRemoteServerIronEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry of a GSLB remote ServerIron configuration."
INDEX { snL4GslbSiteRemoteServerIronIP }
::= { snL4GslbSiteRemoteServerIronTable 1 }
SnL4GslbSiteRemoteServerIronEntry ::= SEQUENCE {
snL4GslbSiteRemoteServerIronIP
IpAddress,
snL4GslbSiteRemoteServerIronPreference
INTEGER
}
snL4GslbSiteRemoteServerIronIP OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index for each remote ServerIron in a site."
::= { snL4GslbSiteRemoteServerIronEntry 1 }
snL4GslbSiteRemoteServerIronPreference OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The preference of a remote ServerIron. The default value is 128."
DEFVAL { 128 }
::= { snL4GslbSiteRemoteServerIronEntry 2 }
-- Real Server Monitor Group
-- The Real Server History Control Group
-- The snL4History control group controls the periodic statistical
-- sampling of data from various types of data sources. The
-- snL4RealServerHistoryControlTable stores configuration entries that each
-- define an interface, polling period, and other parameters.
-- Once samples are taken, their data is stored in an entry
-- in a media-specific table. Each such entry defines one
-- sample, and is associated with the snL4RealServerHistoryControlEntry that
-- caused the sample to be taken. Each counter in the
-- snL4HistoryEntry counts the same event as its
-- similarly-named counterpart in the Statistics Entry,
-- except that each value here is a cumulative sum during a
-- sampling period.
--
-- If the probe keeps track of the time of day, it should
-- start the first sample of the snL4History at a time such that
-- when the next hour of the day begins, a sample is
-- started at that instant. This tends to make more
-- user-friendly reports, and enables comparison of reports
-- from different probes that have relatively accurate time
-- of day.
--
-- The probe is encouraged to add two snL4History control entries
-- per monitored interface upon initialization that describe
-- a short term and a long term polling period. Suggested
-- parameters are 30 seconds for the short term polling period
-- and 30 minutes for the long term period.
snL4RealServerHistoryControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4RealServerHistoryControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of history control entries."
::= { snL4History 1 }
snL4RealServerHistoryControlEntry OBJECT-TYPE
SYNTAX SnL4RealServerHistoryControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of parameters that set up a periodic sampling
of statistics.As an example, an instance of the
snL4RealServerHistoryControlInterval object might be named
snL4RealServerHistoryControlInterval.2"
INDEX { snL4RealServerHistoryControlIndex }
::= { snL4RealServerHistoryControlTable 1 }
SnL4RealServerHistoryControlEntry ::= SEQUENCE {
snL4RealServerHistoryControlIndex
INTEGER (1..65535),
snL4RealServerHistoryControlDataSource
OBJECT IDENTIFIER,
snL4RealServerHistoryControlBucketsRequested
INTEGER (1..65535),
snL4RealServerHistoryControlBucketsGranted
INTEGER (1..65535),
snL4RealServerHistoryControlInterval
INTEGER (1..3600),
snL4RealServerHistoryControlOwner
DisplayString,
snL4RealServerHistoryControlStatus
INTEGER
}
snL4RealServerHistoryControlIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index that uniquely identifies an entry in the
snL4RealServerHistoryControl table.Each such entry defines a
set of samples at a particular interval for an
interface on the device."
::= { snL4RealServerHistoryControlEntry 1 }
snL4RealServerHistoryControlDataSource OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies the source of the data for
which historical data was collected and
placed in a media-specific table on behalf of this
snL4RealServerHistoryControlEntry.This source can be any
real/virtual server and real/virtual server port on
this ServerIron. In order to identify
a particular instance, this object shall identify
the instance of the object, defined in the above
statistics tables.
This object may not be modified if the associated
snL4RealServerHistoryControlStatus object is equal to valid(1)."
::= { snL4RealServerHistoryControlEntry 2 }
snL4RealServerHistoryControlBucketsRequested OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The requested number of discrete time intervals
over which data is to be saved in the part of the
media-specific table associated with this
snL4RealServerHistoryControlEntry.
When this object is created or modified, the probe
should set snL4RealServerHistoryControlBucketsGranted as closely to
this object as is possible for the particular probe
implementation and available resources."
DEFVAL { 50 }
::= { snL4RealServerHistoryControlEntry 3 }
snL4RealServerHistoryControlBucketsGranted OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of discrete sampling intervals
over which data shall be saved in the part of
the media-specific table associated with this
snL4RealServerHistoryControlEntry.
When the associated snL4RealServerHistoryControlBucketsRequested
object is created or modified, the probe
should set this object as closely to the requested
value as is possible for the particular
probe implementation and available resources.The
probe must not lower this value except as a result
of a modification to the associated
snL4RealServerHistoryControlBucketsRequested object.
There will be times when the actual number of
buckets associated with this entry is less than
the value of this object.In this case, at the
end of each sampling interval, a new bucket will
be added to the media-specific table.
When the number of buckets reaches the value of
this object and a new bucket is to be added to the
media-specific table, the oldest bucket associated
with this snL4RealServerHistoryControlEntry shall be deleted by
the agent so that the new bucket can be added.
When the value of this object changes to a value less
than the current value, entries are deleted
from the media-specific table associated with this
snL4RealServerHistoryControlEntry.Enough of the oldest of these
entries shall be deleted by the agent so that their
number remains less than or equal to the new value of
this object.
When the value of this object changes to a value
greater than the current value, the number of
associated media- specific entries may be allowed to
grow."
::= { snL4RealServerHistoryControlEntry 4 }
snL4RealServerHistoryControlInterval OBJECT-TYPE
SYNTAX INTEGER (1..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interval in seconds over which the data is
sampled for each bucket in the part of the
media-specific table associated with this
snL4RealServerHistoryControlEntry.This interval can
be set to any number of seconds between 1 and
3600 (1 hour).
Because the counters in a bucket may overflow at their
maximum value with no indication, a prudent manager
will take into account the possibility of overflow
in any of the associated counters.It is important
to consider the minimum time in which any counter
could overflow on a particular media type and set
the snL4RealServerHistoryControlInterval object to a value less
than this interval.This is typically most
important for the 'octets' counter in any
media-specific table.
This object may not be modified if the associated
snL4RealServerHistoryControlStatus object is equal to valid(1)."
DEFVAL { 1800 }
::= { snL4RealServerHistoryControlEntry 5 }
snL4RealServerHistoryControlOwner OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The entity that configured this entry and is
therefore using the resources assigned to it."
::= { snL4RealServerHistoryControlEntry 6 }
snL4RealServerHistoryControlStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of this snL4RealServerHistoryControl entry.
Each instance of the media-specific table associated
with this snL4RealServerHistoryControlEntry will be deleted by the
agent if this snL4RealServerHistoryControlEntry is not equal to
valid(1)."
::= { snL4RealServerHistoryControlEntry 7 }
-- The Real Server History Group
snL4RealServerHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4RealServerHistoryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of Ethernet snL4History entries."
::= { snL4History 2 }
snL4RealServerHistoryEntry OBJECT-TYPE
SYNTAX SnL4RealServerHistoryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An historical sample of Ethernet statistics on a
particular Ethernet interface. This sample is
associated with the snL4RealServerHistoryControlEntry which set up
the parameters for a regular collection of these
samples. As an example, an instance of the
snL4RealServerHistoryReceivePkts object might be named
snL4RealServerHistoryReceivePkts.2.89"
INDEX { snL4RealServerHistoryIndex , snL4RealServerHistorySampleIndex }
::= { snL4RealServerHistoryTable 1 }
SnL4RealServerHistoryEntry ::= SEQUENCE {
snL4RealServerHistoryIndex
INTEGER (1..65535),
snL4RealServerHistorySampleIndex
INTEGER (1..2147483647),
snL4RealServerHistoryIntervalStart
TimeTicks,
snL4RealServerHistoryReceivePkts
Counter,
snL4RealServerHistoryTransmitPkts
Counter,
snL4RealServerHistoryTotalConnections
Counter,
snL4RealServerHistoryCurConnections
INTEGER,
snL4RealServerHistoryPeakConnections
INTEGER,
snL4RealServerHistoryReassignments
INTEGER
}
snL4RealServerHistoryIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The snL4RealServerHistory of which this entry is a part.The
snL4RealServerHistory identified by a particular value of this
index is the same snL4RealServerHistory as identified
by the same value of snL4RealServerHistoryControlIndex."
::= { snL4RealServerHistoryEntry 1 }
snL4RealServerHistorySampleIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index that uniquely identifies the particular
sample this entry represents among all samples
associated with the same snL4RealServerHistoryControlEntry.
This index starts at 1 and increases by one
as each new sample is taken."
::= { snL4RealServerHistoryEntry 2 }
snL4RealServerHistoryIntervalStart OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of sysUpTime at the start of the interval
over which this sample was measured.If the probe
keeps track of the time of day, it should start
the first sample of the snL4RealServerHistory at a time such that
when the next hour of the day begins, a sample is
started at that instant.Note that following this
rule may require the probe to delay collecting the
first sample of the snL4RealServerHistory, as each sample must be
of the same interval.Also note that the sample which
is currently being collected is not accessible in this
table until the end of its interval."
::= { snL4RealServerHistoryEntry 3 }
snL4RealServerHistoryReceivePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerHistoryEntry 4 }
snL4RealServerHistoryTransmitPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerHistoryEntry 5 }
snL4RealServerHistoryTotalConnections OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerHistoryEntry 6 }
snL4RealServerHistoryCurConnections OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerHistoryEntry 7 }
snL4RealServerHistoryPeakConnections OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerHistoryEntry 8 }
snL4RealServerHistoryReassignments OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerHistoryEntry 9 }
-- Real Server Port Monitor Group
-- The Real Server Port History Control Group
snL4RealServerPortHistoryControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4RealServerPortHistoryControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of history control entries."
::= { snL4History 3 }
snL4RealServerPortHistoryControlEntry OBJECT-TYPE
SYNTAX SnL4RealServerPortHistoryControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of parameters that set up a periodic sampling
of statistics.As an example, an instance of the
snL4RealServerPortHistoryControlInterval object might be named
snL4RealServerPortHistoryControlInterval.2"
INDEX { snL4RealServerPortHistoryControlIndex }
::= { snL4RealServerPortHistoryControlTable 1 }
SnL4RealServerPortHistoryControlEntry ::= SEQUENCE {
snL4RealServerPortHistoryControlIndex
INTEGER (1..65535),
snL4RealServerPortHistoryControlDataSource
OBJECT IDENTIFIER,
snL4RealServerPortHistoryControlBucketsRequested
INTEGER (1..65535),
snL4RealServerPortHistoryControlBucketsGranted
INTEGER (1..65535),
snL4RealServerPortHistoryControlInterval
INTEGER (1..3600),
snL4RealServerPortHistoryControlOwner
DisplayString,
snL4RealServerPortHistoryControlStatus
INTEGER
}
snL4RealServerPortHistoryControlIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index that uniquely identifies an entry in the
snL4RealServerPortHistoryControl table.Each such entry defines a
set of samples at a particular interval for an
interface on the device."
::= { snL4RealServerPortHistoryControlEntry 1 }
snL4RealServerPortHistoryControlDataSource OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies the source of the data for
which historical data was collected and
placed in a media-specific table on behalf of this
snL4RealServerPortHistoryControlEntry.This source can be any
real/virtual server and real/virtual server port on
this ServerIron. In order to identify
a particular instance, this object shall identify
the instance of the object, defined in the above
statistics tables.
This object may not be modified if the associated
snL4RealServerPortHistoryControlStatus object is equal to valid(1)."
::= { snL4RealServerPortHistoryControlEntry 2 }
snL4RealServerPortHistoryControlBucketsRequested OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The requested number of discrete time intervals
over which data is to be saved in the part of the
media-specific table associated with this
snL4RealServerPortHistoryControlEntry.
When this object is created or modified, the probe
should set snL4RealServerPortHistoryControlBucketsGranted as closely to
this object as is possible for the particular probe
implementation and available resources."
DEFVAL { 50 }
::= { snL4RealServerPortHistoryControlEntry 3 }
snL4RealServerPortHistoryControlBucketsGranted OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of discrete sampling intervals
over which data shall be saved in the part of
the media-specific table associated with this
snL4RealServerPortHistoryControlEntry.
When the associated snL4RealServerPortHistoryControlBucketsRequested
object is created or modified, the probe
should set this object as closely to the requested
value as is possible for the particular
probe implementation and available resources.The
probe must not lower this value except as a result
of a modification to the associated
snL4RealServerPortHistoryControlBucketsRequested object.
There will be times when the actual number of
buckets associated with this entry is less than
the value of this object.In this case, at the
end of each sampling interval, a new bucket will
be added to the media-specific table.
When the number of buckets reaches the value of
this object and a new bucket is to be added to the
media-specific table, the oldest bucket associated
with this snL4RealServerPortHistoryControlEntry shall be deleted by
the agent so that the new bucket can be added.
When the value of this object changes to a value less
than the current value, entries are deleted
from the media-specific table associated with this
snL4RealServerPortHistoryControlEntry.Enough of the oldest of these
entries shall be deleted by the agent so that their
number remains less than or equal to the new value of
this object.
When the value of this object changes to a value
greater than the current value, the number of
associated media- specific entries may be allowed to
grow."
::= { snL4RealServerPortHistoryControlEntry 4 }
snL4RealServerPortHistoryControlInterval OBJECT-TYPE
SYNTAX INTEGER (1..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interval in seconds over which the data is
sampled for each bucket in the part of the
media-specific table associated with this
snL4RealServerPortHistoryControlEntry.This interval can
be set to any number of seconds between 1 and
3600 (1 hour).
Because the counters in a bucket may overflow at their
maximum value with no indication, a prudent manager
will take into account the possibility of overflow
in any of the associated counters.It is important
to consider the minimum time in which any counter
could overflow on a particular media type and set
the snL4RealServerPortHistoryControlInterval object to a value less
than this interval.This is typically most
important for the 'octets' counter in any
media-specific table.
This object may not be modified if the associated
snL4RealServerPortHistoryControlStatus object is equal to valid(1)."
DEFVAL { 1800 }
::= { snL4RealServerPortHistoryControlEntry 5 }
snL4RealServerPortHistoryControlOwner OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The entity that configured this entry and is
therefore using the resources assigned to it."
::= { snL4RealServerPortHistoryControlEntry 6 }
snL4RealServerPortHistoryControlStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of this snL4RealServerPortHistoryControl entry.
Each instance of the media-specific table associated
with this snL4RealServerPortHistoryControlEntry will be deleted by the
agent if this snL4RealServerPortHistoryControlEntry is not equal to
valid(1)."
::= { snL4RealServerPortHistoryControlEntry 7 }
-- The Real Server Port History Group
snL4RealServerPortHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4RealServerPortHistoryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of Ethernet snL4History entries."
::= { snL4History 4 }
snL4RealServerPortHistoryEntry OBJECT-TYPE
SYNTAX SnL4RealServerPortHistoryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An historical sample of Ethernet statistics on a
particular Ethernet interface. This sample is
associated with the snL4RealServerPortHistoryControlEntry which set up
the parameters for a regular collection of these
samples. As an example, an instance of the
snL4RealServerPortHistoryReceivePkts object might be named
snL4RealServerPortHistoryReceivePkts.2.89"
INDEX { snL4RealServerPortHistoryIndex , snL4RealServerPortHistorySampleIndex }
::= { snL4RealServerPortHistoryTable 1 }
SnL4RealServerPortHistoryEntry ::= SEQUENCE {
snL4RealServerPortHistoryIndex
INTEGER (1..65535),
snL4RealServerPortHistorySampleIndex
INTEGER (1..2147483647),
snL4RealServerPortHistoryIntervalStart
TimeTicks,
snL4RealServerPortHistoryReceivePkts
Counter,
snL4RealServerPortHistoryTransmitPkts
Counter,
snL4RealServerPortHistoryTotalConnections
Counter,
snL4RealServerPortHistoryCurConnections
INTEGER,
snL4RealServerPortHistoryPeakConnections
INTEGER,
snL4RealServerPortHistoryResponseTime
INTEGER
}
snL4RealServerPortHistoryIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The snL4RealServerPortHistory of which this entry is a part.The
snL4RealServerPortHistory identified by a particular value of this
index is the same snL4RealServerPortHistory as identified
by the same value of snL4RealServerPortHistoryControlIndex."
::= { snL4RealServerPortHistoryEntry 1 }
snL4RealServerPortHistorySampleIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index that uniquely identifies the particular
sample this entry represents among all samples
associated with the same snL4RealServerPortHistoryControlEntry.
This index starts at 1 and increases by one
as each new sample is taken."
::= { snL4RealServerPortHistoryEntry 2 }
snL4RealServerPortHistoryIntervalStart OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of sysUpTime at the start of the interval
over which this sample was measured.If the probe
keeps track of the time of day, it should start
the first sample of the snL4RealServerPortHistory at a time such that
when the next hour of the day begins, a sample is
started at that instant.Note that following this
rule may require the probe to delay collecting the
first sample of the snL4RealServerPortHistory, as each sample must be
of the same interval.Also note that the sample which
is currently being collected is not accessible in this
table until the end of its interval."
::= { snL4RealServerPortHistoryEntry 3 }
snL4RealServerPortHistoryReceivePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerPortHistoryEntry 4 }
snL4RealServerPortHistoryTransmitPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerPortHistoryEntry 5 }
snL4RealServerPortHistoryTotalConnections OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerPortHistoryEntry 6 }
snL4RealServerPortHistoryCurConnections OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerPortHistoryEntry 7 }
snL4RealServerPortHistoryPeakConnections OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerPortHistoryEntry 8 }
snL4RealServerPortHistoryResponseTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4RealServerPortHistoryEntry 9 }
-- Virtual Server Monitor Group
-- The Virtual Server History Control Group
snL4VirtualServerHistoryControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4VirtualServerHistoryControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of history control entries."
::= { snL4History 5 }
snL4VirtualServerHistoryControlEntry OBJECT-TYPE
SYNTAX SnL4VirtualServerHistoryControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of parameters that set up a periodic sampling
of statistics.As an example, an instance of the
snL4VirtualServerHistoryControlInterval object might be named
snL4VirtualServerHistoryControlInterval.2"
INDEX { snL4VirtualServerHistoryControlIndex }
::= { snL4VirtualServerHistoryControlTable 1 }
SnL4VirtualServerHistoryControlEntry ::= SEQUENCE {
snL4VirtualServerHistoryControlIndex
INTEGER (1..65535),
snL4VirtualServerHistoryControlDataSource
OBJECT IDENTIFIER,
snL4VirtualServerHistoryControlBucketsRequested
INTEGER (1..65535),
snL4VirtualServerHistoryControlBucketsGranted
INTEGER (1..65535),
snL4VirtualServerHistoryControlInterval
INTEGER (1..3600),
snL4VirtualServerHistoryControlOwner
DisplayString,
snL4VirtualServerHistoryControlStatus
INTEGER
}
snL4VirtualServerHistoryControlIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index that uniquely identifies an entry in the
snL4VirtualServerHistoryControl table.Each such entry defines a
set of samples at a particular interval for an
interface on the device."
::= { snL4VirtualServerHistoryControlEntry 1 }
snL4VirtualServerHistoryControlDataSource OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies the source of the data for
which historical data was collected and
placed in a media-specific table on behalf of this
snL4VirtualServerHistoryControlEntry.This source can be any
real/virtual server and real/virtual server port on
this ServerIron. In order to identify
a particular instance, this object shall identify
the instance of the object, defined in the above
statistics tables.
This object may not be modified if the associated
snL4VirtualServerHistoryControlStatus object is equal to valid(1)."
::= { snL4VirtualServerHistoryControlEntry 2 }
snL4VirtualServerHistoryControlBucketsRequested OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The requested number of discrete time intervals
over which data is to be saved in the part of the
media-specific table associated with this
snL4VirtualServerHistoryControlEntry.
When this object is created or modified, the probe
should set snL4VirtualServerHistoryControlBucketsGranted as closely to
this object as is possible for the particular probe
implementation and available resources."
DEFVAL { 50 }
::= { snL4VirtualServerHistoryControlEntry 3 }
snL4VirtualServerHistoryControlBucketsGranted OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of discrete sampling intervals
over which data shall be saved in the part of
the media-specific table associated with this
snL4VirtualServerHistoryControlEntry.
When the associated snL4VirtualServerHistoryControlBucketsRequested
object is created or modified, the probe
should set this object as closely to the requested
value as is possible for the particular
probe implementation and available resources.The
probe must not lower this value except as a result
of a modification to the associated
snL4VirtualServerHistoryControlBucketsRequested object.
There will be times when the actual number of
buckets associated with this entry is less than
the value of this object.In this case, at the
end of each sampling interval, a new bucket will
be added to the media-specific table.
When the number of buckets reaches the value of
this object and a new bucket is to be added to the
media-specific table, the oldest bucket associated
with this snL4VirtualServerHistoryControlEntry shall be deleted by
the agent so that the new bucket can be added.
When the value of this object changes to a value less
than the current value, entries are deleted
from the media-specific table associated with this
snL4VirtualServerHistoryControlEntry.Enough of the oldest of these
entries shall be deleted by the agent so that their
number remains less than or equal to the new value of
this object.
When the value of this object changes to a value
greater than the current value, the number of
associated media- specific entries may be allowed to
grow."
::= { snL4VirtualServerHistoryControlEntry 4 }
snL4VirtualServerHistoryControlInterval OBJECT-TYPE
SYNTAX INTEGER (1..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interval in seconds over which the data is
sampled for each bucket in the part of the
media-specific table associated with this
snL4VirtualServerHistoryControlEntry.This interval can
be set to any number of seconds between 1 and
3600 (1 hour).
Because the counters in a bucket may overflow at their
maximum value with no indication, a prudent manager
will take into account the possibility of overflow
in any of the associated counters.It is important
to consider the minimum time in which any counter
could overflow on a particular media type and set
the snL4VirtualServerHistoryControlInterval object to a value less
than this interval.This is typically most
important for the 'octets' counter in any
media-specific table.
This object may not be modified if the associated
snL4VirtualServerHistoryControlStatus object is equal to valid(1)."
DEFVAL { 1800 }
::= { snL4VirtualServerHistoryControlEntry 5 }
snL4VirtualServerHistoryControlOwner OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The entity that configured this entry and is
therefore using the resources assigned to it."
::= { snL4VirtualServerHistoryControlEntry 6 }
snL4VirtualServerHistoryControlStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of this snL4VirtualServerHistoryControl entry.
Each instance of the media-specific table associated
with this snL4VirtualServerHistoryControlEntry will be deleted by the
agent if this snL4VirtualServerHistoryControlEntry is not equal to
valid(1)."
::= { snL4VirtualServerHistoryControlEntry 7 }
-- The Virtual Server History Group
snL4VirtualServerHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4VirtualServerHistoryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of Ethernet snL4History entries."
::= { snL4History 6 }
snL4VirtualServerHistoryEntry OBJECT-TYPE
SYNTAX SnL4VirtualServerHistoryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An historical sample of Ethernet statistics on a
particular Ethernet interface. This sample is
associated with the snL4VirtualServerHistoryControlEntry which set up
the parameters for a regular collection of these
samples. As an example, an instance of the
snL4VirtualServerHistoryReceivePkts object might be named
snL4VirtualServerHistoryReceivePkts.2.89"
INDEX { snL4VirtualServerHistoryIndex , snL4VirtualServerHistorySampleIndex }
::= { snL4VirtualServerHistoryTable 1 }
SnL4VirtualServerHistoryEntry ::= SEQUENCE {
snL4VirtualServerHistoryIndex
INTEGER (1..65535),
snL4VirtualServerHistorySampleIndex
INTEGER (1..2147483647),
snL4VirtualServerHistoryIntervalStart
TimeTicks,
snL4VirtualServerHistoryReceivePkts
Counter,
snL4VirtualServerHistoryTransmitPkts
Counter,
snL4VirtualServerHistoryTotalConnections
Counter,
snL4VirtualServerHistoryCurConnections
INTEGER,
snL4VirtualServerHistoryPeakConnections
INTEGER
}
snL4VirtualServerHistoryIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The snL4VirtualServerHistory of which this entry is a part.The
snL4VirtualServerHistory identified by a particular value of this
index is the same snL4VirtualServerHistory as identified
by the same value of snL4VirtualServerHistoryControlIndex."
::= { snL4VirtualServerHistoryEntry 1 }
snL4VirtualServerHistorySampleIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index that uniquely identifies the particular
sample this entry represents among all samples
associated with the same snL4VirtualServerHistoryControlEntry.
This index starts at 1 and increases by one
as each new sample is taken."
::= { snL4VirtualServerHistoryEntry 2 }
snL4VirtualServerHistoryIntervalStart OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of sysUpTime at the start of the interval
over which this sample was measured.If the probe
keeps track of the time of day, it should start
the first sample of the snL4VirtualServerHistory at a time such that
when the next hour of the day begins, a sample is
started at that instant.Note that following this
rule may require the probe to delay collecting the
first sample of the snL4VirtualServerHistory, as each sample must be
of the same interval.Also note that the sample which
is currently being collected is not accessible in this
table until the end of its interval."
::= { snL4VirtualServerHistoryEntry 3 }
snL4VirtualServerHistoryReceivePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerHistoryEntry 4 }
snL4VirtualServerHistoryTransmitPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerHistoryEntry 5 }
snL4VirtualServerHistoryTotalConnections OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerHistoryEntry 6 }
snL4VirtualServerHistoryCurConnections OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerHistoryEntry 7 }
snL4VirtualServerHistoryPeakConnections OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerHistoryEntry 8 }
-- Virtual Server Port Monitor Group
-- The Virtual Server Port History Control Group
snL4VirtualServerPortHistoryControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4VirtualServerPortHistoryControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of history control entries."
::= { snL4History 7 }
snL4VirtualServerPortHistoryControlEntry OBJECT-TYPE
SYNTAX SnL4VirtualServerPortHistoryControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of parameters that set up a periodic sampling
of statistics.As an example, an instance of the
snL4VirtualServerPortHistoryControlInterval object might be named
snL4VirtualServerPortHistoryControlInterval.2"
INDEX { snL4VirtualServerPortHistoryControlIndex }
::= { snL4VirtualServerPortHistoryControlTable 1 }
SnL4VirtualServerPortHistoryControlEntry ::= SEQUENCE {
snL4VirtualServerPortHistoryControlIndex
INTEGER (1..65535),
snL4VirtualServerPortHistoryControlDataSource
OBJECT IDENTIFIER,
snL4VirtualServerPortHistoryControlBucketsRequested
INTEGER (1..65535),
snL4VirtualServerPortHistoryControlBucketsGranted
INTEGER (1..65535),
snL4VirtualServerPortHistoryControlInterval
INTEGER (1..3600),
snL4VirtualServerPortHistoryControlOwner
DisplayString,
snL4VirtualServerPortHistoryControlStatus
INTEGER
}
snL4VirtualServerPortHistoryControlIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index that uniquely identifies an entry in the
snL4VirtualServerPortHistoryControl table.Each such entry defines a
set of samples at a particular interval for an
interface on the device."
::= { snL4VirtualServerPortHistoryControlEntry 1 }
snL4VirtualServerPortHistoryControlDataSource OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies the source of the data for
which historical data was collected and
placed in a media-specific table on behalf of this
snL4VirtualServerPortHistoryControlEntry.This source can be any
real/virtual server and real/virtual server port on
this ServerIron. In order to identify
a particular instance, this object shall identify
the instance of the object, defined in the above
statistics tables.
This object may not be modified if the associated
snL4VirtualServerPortHistoryControlStatus object is equal to valid(1)."
::= { snL4VirtualServerPortHistoryControlEntry 2 }
snL4VirtualServerPortHistoryControlBucketsRequested OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The requested number of discrete time intervals
over which data is to be saved in the part of the
media-specific table associated with this
snL4VirtualServerPortHistoryControlEntry.
When this object is created or modified, the probe
should set snL4VirtualServerPortHistoryControlBucketsGranted as closely to
this object as is possible for the particular probe
implementation and available resources."
DEFVAL { 50 }
::= { snL4VirtualServerPortHistoryControlEntry 3 }
snL4VirtualServerPortHistoryControlBucketsGranted OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of discrete sampling intervals
over which data shall be saved in the part of
the media-specific table associated with this
snL4VirtualServerPortHistoryControlEntry.
When the associated snL4VirtualServerPortHistoryControlBucketsRequested
object is created or modified, the probe
should set this object as closely to the requested
value as is possible for the particular
probe implementation and available resources.The
probe must not lower this value except as a result
of a modification to the associated
snL4VirtualServerPortHistoryControlBucketsRequested object.
There will be times when the actual number of
buckets associated with this entry is less than
the value of this object.In this case, at the
end of each sampling interval, a new bucket will
be added to the media-specific table.
When the number of buckets reaches the value of
this object and a new bucket is to be added to the
media-specific table, the oldest bucket associated
with this snL4VirtualServerPortHistoryControlEntry shall be deleted by
the agent so that the new bucket can be added.
When the value of this object changes to a value less
than the current value, entries are deleted
from the media-specific table associated with this
snL4VirtualServerPortHistoryControlEntry.Enough of the oldest of these
entries shall be deleted by the agent so that their
number remains less than or equal to the new value of
this object.
When the value of this object changes to a value
greater than the current value, the number of
associated media- specific entries may be allowed to
grow."
::= { snL4VirtualServerPortHistoryControlEntry 4 }
snL4VirtualServerPortHistoryControlInterval OBJECT-TYPE
SYNTAX INTEGER (1..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The interval in seconds over which the data is
sampled for each bucket in the part of the
media-specific table associated with this
snL4VirtualServerPortHistoryControlEntry.This interval can
be set to any number of seconds between 1 and
3600 (1 hour).
Because the counters in a bucket may overflow at their
maximum value with no indication, a prudent manager
will take into account the possibility of overflow
in any of the associated counters.It is important
to consider the minimum time in which any counter
could overflow on a particular media type and set
the snL4VirtualServerPortHistoryControlInterval object to a value less
than this interval.This is typically most
important for the 'octets' counter in any
media-specific table.
This object may not be modified if the associated
snL4VirtualServerPortHistoryControlStatus object is equal to valid(1)."
DEFVAL { 1800 }
::= { snL4VirtualServerPortHistoryControlEntry 5 }
snL4VirtualServerPortHistoryControlOwner OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The entity that configured this entry and is
therefore using the resources assigned to it."
::= { snL4VirtualServerPortHistoryControlEntry 6 }
snL4VirtualServerPortHistoryControlStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
createRequest(2),
underCreation(3),
invalid(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of this snL4VirtualServerPortHistoryControl entry.
Each instance of the media-specific table associated
with this snL4VirtualServerPortHistoryControlEntry will be deleted by the
agent if this snL4VirtualServerPortHistoryControlEntry is not equal to
valid(1)."
::= { snL4VirtualServerPortHistoryControlEntry 7 }
-- The Virtual Server Port History Group
snL4VirtualServerPortHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnL4VirtualServerPortHistoryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of Ethernet snL4History entries."
::= { snL4History 8 }
snL4VirtualServerPortHistoryEntry OBJECT-TYPE
SYNTAX SnL4VirtualServerPortHistoryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An historical sample of Ethernet statistics on a
particular Ethernet interface. This sample is
associated with the snL4VirtualServerPortHistoryControlEntry which set up
the parameters for a regular collection of these
samples. As an example, an instance of the
snL4VirtualServerPortHistoryReceivePkts object might be named
snL4VirtualServerPortHistoryReceivePkts.2.89"
INDEX { snL4VirtualServerPortHistoryIndex , snL4VirtualServerPortHistorySampleIndex }
::= { snL4VirtualServerPortHistoryTable 1 }
SnL4VirtualServerPortHistoryEntry ::= SEQUENCE {
snL4VirtualServerPortHistoryIndex
INTEGER (1..65535),
snL4VirtualServerPortHistorySampleIndex
INTEGER (1..2147483647),
snL4VirtualServerPortHistoryIntervalStart
TimeTicks,
snL4VirtualServerPortHistoryReceivePkts
Counter,
snL4VirtualServerPortHistoryTransmitPkts
Counter,
snL4VirtualServerPortHistoryTotalConnections
Counter,
snL4VirtualServerPortHistoryCurConnections
INTEGER,
snL4VirtualServerPortHistoryPeakConnections
INTEGER
}
snL4VirtualServerPortHistoryIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The snL4VirtualServerPortHistory of which this entry is a part.The
snL4VirtualServerPortHistory identified by a particular value of this
index is the same snL4VirtualServerPortHistory as identified
by the same value of snL4VirtualServerPortHistoryControlIndex."
::= { snL4VirtualServerPortHistoryEntry 1 }
snL4VirtualServerPortHistorySampleIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index that uniquely identifies the particular
sample this entry represents among all samples
associated with the same snL4VirtualServerPortHistoryControlEntry.
This index starts at 1 and increases by one
as each new sample is taken."
::= { snL4VirtualServerPortHistoryEntry 2 }
snL4VirtualServerPortHistoryIntervalStart OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of sysUpTime at the start of the interval
over which this sample was measured.If the probe
keeps track of the time of day, it should start
the first sample of the snL4VirtualServerPortHistory at a time such that
when the next hour of the day begins, a sample is
started at that instant.Note that following this
rule may require the probe to delay collecting the
first sample of the snL4VirtualServerPortHistory, as each sample must be
of the same interval.Also note that the sample which
is currently being collected is not accessible in this
table until the end of its interval."
::= { snL4VirtualServerPortHistoryEntry 3 }
snL4VirtualServerPortHistoryReceivePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortHistoryEntry 4 }
snL4VirtualServerPortHistoryTransmitPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortHistoryEntry 5 }
snL4VirtualServerPortHistoryTotalConnections OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortHistoryEntry 6 }
snL4VirtualServerPortHistoryCurConnections OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortHistoryEntry 7 }
snL4VirtualServerPortHistoryPeakConnections OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { snL4VirtualServerPortHistoryEntry 8 }
END
HP-SN-BGP4-GROUP-MIB DEFINITIONS ::= BEGIN
-- Foundry snBgp4 Group MIB Release 1.0.0
-- Revision 0 09/09/98
-- Copyright 1996-97 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry Networks SNMP Management Information Base Specification
-- (Specification) embodies Foundry Networks' confidential and
-- proprietary intellectual property. Foundry Networks retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS," and Foundry Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
-- SECTION 1: Top Level Definitions
IMPORTS
Counter, Gauge, IpAddress
FROM RFC1155-SMI
-- mib-2
-- FROM RFC1213-MIB
OBJECT-TYPE
FROM RFC-1212
snBgp4
FROM HP-SN-ROOT-MIB;
-- Groups
snBgp4Gen OBJECT IDENTIFIER ::= { snBgp4 1 }
snBgp4AddrFilter OBJECT IDENTIFIER ::= { snBgp4 2 }
snBgp4AggregateAddr OBJECT IDENTIFIER ::= { snBgp4 3 }
snBgp4AsPathFilter OBJECT IDENTIFIER ::= { snBgp4 4 }
snBgp4CommunityFilter OBJECT IDENTIFIER ::= { snBgp4 5 }
snBgp4NeighGenCfg OBJECT IDENTIFIER ::= { snBgp4 6 }
snBgp4NeighDistGroup OBJECT IDENTIFIER ::= { snBgp4 7 }
snBgp4NeighFilterGroup OBJECT IDENTIFIER ::= { snBgp4 8 }
snBgp4NeighRouteMap OBJECT IDENTIFIER ::= { snBgp4 9 }
snBgp4Network OBJECT IDENTIFIER ::= { snBgp4 10 }
snBgp4Redis OBJECT IDENTIFIER ::= { snBgp4 11 }
snBgp4RouteMapFilter OBJECT IDENTIFIER ::= { snBgp4 12 }
snBgp4RouteMapMatch OBJECT IDENTIFIER ::= { snBgp4 13 }
snBgp4RouteMapSet OBJECT IDENTIFIER ::= { snBgp4 14 }
snBgp4NeighOperStatus OBJECT IDENTIFIER ::= { snBgp4 15 }
snBgp4RouteOperStatus OBJECT IDENTIFIER ::= { snBgp4 16 }
snBgp4NeighborSummary OBJECT IDENTIFIER ::= { snBgp4 17 }
snBgp4Attribute OBJECT IDENTIFIER ::= { snBgp4 18 }
snBgp4ClearNeighborCmd OBJECT IDENTIFIER ::= { snBgp4 19 }
snBgp4NeighPrefixGroup OBJECT IDENTIFIER ::= { snBgp4 20 }
-- BGP4 General Variables
-- These parameters apply globally to the Router's
-- BGP4 Process.
snBgp4GenAlwaysCompareMed OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To enable/disable the comparison of the Multi-Exit Discriminator for paths from
neighbors in different AS."
::= { snBgp4Gen 1 }
snBgp4GenAutoSummary OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To enable/disable the default behavior of automatic summarization of subnet routes
into network-level routes."
::= { snBgp4Gen 2 }
snBgp4GenDefaultLocalPreference OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To set the default local preference attribute."
::= { snBgp4Gen 3 }
snBgp4GenDefaultInfoOriginate OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To enable/disable the default Information Originate."
::= { snBgp4Gen 4 }
snBgp4GenFastExternalFallover OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To enable/disable an action of immediately reset the BGP sessions of any
directly adjacent external neighbors if the link used to reach them goes
down."
::= { snBgp4Gen 5 }
snBgp4GenNextBootNeighbors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The next-boot configured number of neighbors in a BGP Peer Group.
The minimum value of this MIB is snBgp4GenMinNeighbors.
The maximum value of this MIB is snBgp4GenMaxNeighbors."
::= { snBgp4Gen 6 }
snBgp4GenNextBootRoutes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The next-boot configured number of Routes.
The minimum value of this MIB is snBgp4GenMinRoutes.
The maximum value of this MIB is snBgp4GenMaxRoutes."
::= { snBgp4Gen 7 }
snBgp4GenSynchronization OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To enable/disable the synchronization between BGP and your IGP."
::= { snBgp4Gen 8 }
snBgp4GenKeepAliveTime OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Keep alive timer."
::= { snBgp4Gen 9 }
snBgp4GenHoldTime OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Hold time timer."
::= { snBgp4Gen 10 }
snBgp4GenRouterId OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"BGP Router Id."
::= { snBgp4Gen 11 }
snBgp4GenTableMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An octet string of the route-map name, each character of the name
is represented by one octet."
::= { snBgp4Gen 12 }
snBgp4GenAdminStat OBJECT-TYPE
SYNTAX INTEGER { disabled (0), enabled (1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The administrative status of BGP4 in the router. The
value 'enabled' denotes that the BGP4 routing is active
in this router; 'disabled' disables BGP4 routing on this router."
::= { snBgp4Gen 13 }
snBgp4GenDefaultMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To set default metric values for the BGP4 protocol."
::= { snBgp4Gen 14 }
snBgp4GenMaxNeighbors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of neighbors can be configured in a BGP Peer Group."
::= { snBgp4Gen 15 }
snBgp4GenMinNeighbors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum number of neighbors can be configured in a BGP Peer Group."
::= { snBgp4Gen 16 }
snBgp4GenMaxRoutes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum configured number of Routes."
::= { snBgp4Gen 17 }
snBgp4GenMinRoutes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum configured number of Routes."
::= { snBgp4Gen 18 }
snBgp4GenMaxAddrFilters OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum configured number of BGP4 address filters."
::= { snBgp4Gen 19 }
snBgp4GenMaxAggregateAddresses OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum configured number of BGP4 aggregate addresses."
::= { snBgp4Gen 20 }
snBgp4GenMaxAsPathFilters OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum configured number of BGP4 AS-PATH filters."
::= { snBgp4Gen 21 }
snBgp4GenMaxCommunityFilters OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum configured number of BGP4 Community filters."
::= { snBgp4Gen 22 }
snBgp4GenMaxNetworks OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum configured number of BGP4 Networks."
::= { snBgp4Gen 23 }
snBgp4GenMaxRouteMapFilters OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum configured number of BGP4 Route-map Filters."
::= { snBgp4Gen 24 }
snBgp4GenNeighPrefixMinValue OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum configured value of BGP4 Neighbor Prefix."
::= { snBgp4Gen 25 }
snBgp4GenOperNeighbors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current operational max number of neighbors configured for a BGP Group."
::= { snBgp4Gen 26 }
snBgp4GenOperRoutes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current operational number of Routes."
::= { snBgp4Gen 27 }
snBgp4GenLocalAs OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bgp4 local autonomous system number."
::= { snBgp4Gen 28 }
snBgp4GenRoutesInstalled OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bgp4 installed routes."
::= { snBgp4Gen 29 }
snBgp4GenAsPathInstalled OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bgp4 installed autonomous system path."
::= { snBgp4Gen 30 }
snBgp4ExternalDistance OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Administrative distance for BGP external routes."
DEFVAL { 20 }
::= { snBgp4Gen 31 }
snBgp4InternalDistance OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Administrative distance for BGP internal routes."
DEFVAL { 200 }
::= { snBgp4Gen 32 }
snBgp4LocalDistance OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Administrative distance for BGP local routes."
DEFVAL { 200 }
::= { snBgp4Gen 33 }
snBgp4OperNumOfAttributes OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The operational number of attribute entries."
::= { snBgp4Gen 34 }
snBgp4NextBootMaxAttributes OBJECT-TYPE
SYNTAX INTEGER (200..30000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The next boot maximum attribute entries. 10000 means reset to default."
DEFVAL { 10000 }
::= { snBgp4Gen 35 }
snBgp4ClusterId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A cluster ID which is represented by 4 bytes unsigned
integer (0..0xFFFFFFFF). 0 means reset to default."
::= { snBgp4Gen 36 }
snBgp4ClientToClientReflection OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To enable/disable the client to client reflection in BGP4."
::= { snBgp4Gen 37 }
snBgp4GenTotalNeighbors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current total number of neighbors running in a BGP Group."
::= { snBgp4Gen 38 }
snBgp4GenMaxPaths OBJECT-TYPE
SYNTAX INTEGER (1..8)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum configured number of Paths."
::= { snBgp4Gen 39 }
snBgp4GenConfedId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bgp4 Confederation Id."
::= { snBgp4Gen 40 }
snBgp4GenConfedPeers OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..100))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An AS number from 1 to 0xFFFF construct confederation peers.
There are 50(max peers) of them.
This integer number is represented by 2 OCTETs."
::= { snBgp4Gen 41 }
snBgp4GenDampening OBJECT-TYPE
SYNTAX INTEGER { none (0), parameters (1), routeMap (2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The dampening of BGP4 in the router.
value 'none' denotes that the BGP4 dampening is off
'parameters' denotes parameters are confibrurable.
'routeMap' denotes routemap is configurable."
::= { snBgp4Gen 42 }
snBgp4GenDampenHalfLife OBJECT-TYPE
SYNTAX INTEGER (1..45)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bgp4 Dampening Half Life."
::= { snBgp4Gen 43 }
snBgp4GenDampenReuse OBJECT-TYPE
SYNTAX INTEGER (1..20000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bgp4 Dampening Reuse."
::= { snBgp4Gen 44 }
snBgp4GenDampenSuppress OBJECT-TYPE
SYNTAX INTEGER (1..20000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bgp4 Dampening Suppress."
::= { snBgp4Gen 45 }
snBgp4GenDampenMaxSuppress OBJECT-TYPE
SYNTAX INTEGER (1..20000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bgp4 Dampening Max Suppress Time."
::= { snBgp4Gen 46 }
snBgp4GenDampenMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An octet string of the route-map name for dampening, each character of the name
is represented by one octet."
::= { snBgp4Gen 47 }
--- Bgp4 Address Filter table
snBgp4AddrFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnBgp4AddrFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Bgp4 Address Filter table."
::= { snBgp4AddrFilter 1 }
snBgp4AddrFilterEntry OBJECT-TYPE
SYNTAX SnBgp4AddrFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Bgp4 Address Filter table."
INDEX { snBgp4AddrFilterIndex }
::= { snBgp4AddrFilterTable 1 }
SnBgp4AddrFilterEntry ::= SEQUENCE {
snBgp4AddrFilterIndex
INTEGER,
snBgp4AddrFilterAction
INTEGER,
snBgp4AddrFilterSourceIp
IpAddress,
snBgp4AddrFilterSourceMask
IpAddress,
snBgp4AddrFilterDestIp
IpAddress,
snBgp4AddrFilterDestMask
IpAddress,
snBgp4AddrFilterRowStatus
INTEGER
}
snBgp4AddrFilterIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a filter entry."
::= { snBgp4AddrFilterEntry 1 }
snBgp4AddrFilterAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the bgp address match
with this filter."
::= { snBgp4AddrFilterEntry 2 }
snBgp4AddrFilterSourceIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source IP address."
::= { snBgp4AddrFilterEntry 3 }
snBgp4AddrFilterSourceMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source IP subnet mask."
::= { snBgp4AddrFilterEntry 4 }
snBgp4AddrFilterDestIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP address."
::= { snBgp4AddrFilterEntry 5 }
snBgp4AddrFilterDestMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP subnet mask."
::= { snBgp4AddrFilterEntry 6 }
snBgp4AddrFilterRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snBgp4AddrFilterEntry 7 }
-- Bgp4 Aggregate Address table
snBgp4AggregateAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnBgp4AggregateAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Bgp4 Aggregate Address table."
::= { snBgp4AggregateAddr 1 }
snBgp4AggregateAddrEntry OBJECT-TYPE
SYNTAX SnBgp4AggregateAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Bgp4 Aggregate Address table."
INDEX { snBgp4AggregateAddrIp, snBgp4AggregateAddrMask, snBgp4AggregateAddrOption }
::= { snBgp4AggregateAddrTable 1 }
SnBgp4AggregateAddrEntry ::= SEQUENCE {
snBgp4AggregateAddrIp
IpAddress,
snBgp4AggregateAddrMask
IpAddress,
snBgp4AggregateAddrOption
INTEGER,
snBgp4AggregateAddrMap
OCTET STRING,
snBgp4AggregateAddrRowStatus
INTEGER
}
snBgp4AggregateAddrIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Aggregate Address IP address."
::= { snBgp4AggregateAddrEntry 1 }
snBgp4AggregateAddrMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Aggregate Address IP subnet mask."
::= { snBgp4AggregateAddrEntry 2 }
snBgp4AggregateAddrOption OBJECT-TYPE
SYNTAX INTEGER {
address(1),
asSet(2),
summaryOnly(3),
suppressMap(4),
advertiseMap(5),
attributeMap(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"address(1), asSet(2), summaryOnly(3),
the suppressMap(4), advertiseMap(5),
attributeMap(6) are Options for creating an aggregate entry
in a BGP routing table."
::= { snBgp4AggregateAddrEntry 3 }
snBgp4AggregateAddrMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object associates with the snBgp4AggregateAddrOption and
the suppressMap(4), advertiseMap(5), attributeMap(6) of the
snBgp4AggregateAddrOption are only two Options for creating
an aggregate address map. A SNMP-SET error will be returned
for other options. An octet string of the map name,
each character of the name is represented by one octet."
::= { snBgp4AggregateAddrEntry 4 }
snBgp4AggregateAddrRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snBgp4AggregateAddrEntry 5 }
-- Bgp4 AS-Path Filter table
snBgp4AsPathFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnBgp4AsPathFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Bgp4 AS-Path Filter table."
::= { snBgp4AsPathFilter 1 }
snBgp4AsPathFilterEntry OBJECT-TYPE
SYNTAX SnBgp4AsPathFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Bgp4 As-path Filter table."
INDEX { snBgp4AsPathFilterIndex }
::= { snBgp4AsPathFilterTable 1 }
SnBgp4AsPathFilterEntry ::= SEQUENCE {
snBgp4AsPathFilterIndex
INTEGER,
snBgp4AsPathFilterAction
INTEGER,
snBgp4AsPathFilterRegExpression
OCTET STRING,
snBgp4AsPathFilterRowStatus
INTEGER
}
snBgp4AsPathFilterIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a filter entry."
::= { snBgp4AsPathFilterEntry 1 }
snBgp4AsPathFilterAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the bgp address match
with this filter."
::= { snBgp4AsPathFilterEntry 2 }
snBgp4AsPathFilterRegExpression OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Autonomous system in the filter using a regular expression.
Each character of the regular expression string is represented
by one octet."
::= { snBgp4AsPathFilterEntry 3 }
snBgp4AsPathFilterRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snBgp4AsPathFilterEntry 4 }
-- Bgp4 Community Filter table
snBgp4CommunityFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnBgp4CommunityFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Bgp4 Community Filter table."
::= { snBgp4CommunityFilter 1 }
snBgp4CommunityFilterEntry OBJECT-TYPE
SYNTAX SnBgp4CommunityFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Bgp4 Community Filter table."
INDEX { snBgp4CommunityFilterIndex }
::= { snBgp4CommunityFilterTable 1 }
SnBgp4CommunityFilterEntry ::= SEQUENCE {
snBgp4CommunityFilterIndex
INTEGER,
snBgp4CommunityFilterAction
INTEGER,
snBgp4CommunityFilterCommNum
OCTET STRING,
snBgp4CommunityFilterInternet
INTEGER,
snBgp4CommunityFilterNoAdvertise
INTEGER,
snBgp4CommunityFilterNoExport
INTEGER,
snBgp4CommunityFilterRowStatus
INTEGER,
snBgp4CommunityFilterLocalAs
INTEGER
}
snBgp4CommunityFilterIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for a filter entry."
::= { snBgp4CommunityFilterEntry 1 }
snBgp4CommunityFilterAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the bgp address match
with this filter."
::= { snBgp4CommunityFilterEntry 2 }
snBgp4CommunityFilterCommNum OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFFFFFF. There are 20 of them.
This integer number is represented by 4 OCTETs."
::= { snBgp4CommunityFilterEntry 3 }
snBgp4CommunityFilterInternet OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Disabled/Enabled the Internet Community."
::= { snBgp4CommunityFilterEntry 4 }
snBgp4CommunityFilterNoAdvertise OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Do not advertise this route to any peer (internal or external)."
::= { snBgp4CommunityFilterEntry 5 }
snBgp4CommunityFilterNoExport OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Do not advertise this route to an EBGP peer."
::= { snBgp4CommunityFilterEntry 6 }
snBgp4CommunityFilterRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snBgp4CommunityFilterEntry 7 }
snBgp4CommunityFilterLocalAs OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Send this route to peers in other sub-autonomous systems within
the local confederation. Do not advertise this route to an
external system."
::= { snBgp4CommunityFilterEntry 8 }
-- Bgp4 Neighbor General Configuration Table
snBgp4NeighGenCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnBgp4NeighGenCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Bgp4 Neighbor General Configuration table."
::= { snBgp4NeighGenCfg 1 }
snBgp4NeighGenCfgEntry OBJECT-TYPE
SYNTAX SnBgp4NeighGenCfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Bgp4 Community Filter table."
INDEX { snBgp4NeighGenCfgNeighIp }
::= { snBgp4NeighGenCfgTable 1 }
SnBgp4NeighGenCfgEntry ::= SEQUENCE {
snBgp4NeighGenCfgNeighIp
IpAddress,
snBgp4NeighGenCfgAdvertlevel
INTEGER,
snBgp4NeighGenCfgDefOriginate
INTEGER,
snBgp4NeighGenCfgEbgpMultihop
INTEGER,
snBgp4NeighGenCfgMaxPrefix
INTEGER,
snBgp4NeighGenCfgNextHopSelf
INTEGER,
snBgp4NeighGenCfgRemoteAs
INTEGER,
snBgp4NeighGenCfgSendComm
INTEGER,
snBgp4NeighGenCfgWeight
INTEGER,
snBgp4NeighGenCfgWeightFilterList
OCTET STRING,
snBgp4NeighGenCfgRowStatus
INTEGER,
snBgp4NeighGenCfgUpdateSrcLpbIntf
INTEGER,
snBgp4NeighGenCfgRouteRefClient
INTEGER,
snBgp4NeighGenCfgRemovePrivateAs
INTEGER,
snBgp4NeighGenCfgEbgpMultihopTtl
INTEGER,
snBgp4NeighGenCfgShutdown
INTEGER,
snBgp4NeighGenCfgKeepAliveTime
INTEGER,
snBgp4NeighGenCfgHoldTime
INTEGER,
snBgp4NeighGenCfgDefOrigMap
OCTET STRING,
snBgp4NeighGenCfgDesc
OCTET STRING,
snBgp4NeighGenCfgPass
OCTET STRING
}
snBgp4NeighGenCfgNeighIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP Address for a neighbor entry."
::= { snBgp4NeighGenCfgEntry 1 }
snBgp4NeighGenCfgAdvertlevel OBJECT-TYPE
SYNTAX INTEGER (0..600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To set the minimum interval between the
sending of BGP routing updates."
::= { snBgp4NeighGenCfgEntry 2 }
snBgp4NeighGenCfgDefOriginate OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To enable/disable the default originate for this neighbor."
::= { snBgp4NeighGenCfgEntry 3 }
snBgp4NeighGenCfgEbgpMultihop OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To enable/disable the EBGP Muitihop for this neighbor."
::= { snBgp4NeighGenCfgEntry 4 }
snBgp4NeighGenCfgMaxPrefix OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To control how many prefixes can be received from a neighbor.
The minimum value of the maximum prefix is snBgp4GenNeighPrefixMinValue.
The maximum value of the maximum prefix is snBgp4GenOperRoutes."
::= { snBgp4NeighGenCfgEntry 5 }
snBgp4NeighGenCfgNextHopSelf OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To enable/disable the next-hop processing of BGP updates on the router."
::= { snBgp4NeighGenCfgEntry 6 }
snBgp4NeighGenCfgRemoteAs OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To specify a neighbor with an autonomous system number(AS)."
::= { snBgp4NeighGenCfgEntry 7 }
snBgp4NeighGenCfgSendComm OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To specify that a COMMUNITES attribute should be sent to a BGP neighbor."
::= { snBgp4NeighGenCfgEntry 8 }
snBgp4NeighGenCfgWeight OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To assign a weight to a neighbor connection."
::= { snBgp4NeighGenCfgEntry 9 }
snBgp4NeighGenCfgWeightFilterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFF. There are 16 of them.
This integer number is represented by 2 OCTETs."
::= { snBgp4NeighGenCfgEntry 10 }
snBgp4NeighGenCfgRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5),
applyDefault(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
applyDefault(6)...apply default value to an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snBgp4NeighGenCfgEntry 11 }
snBgp4NeighGenCfgUpdateSrcLpbIntf OBJECT-TYPE
SYNTAX INTEGER (0..8)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To allow internal BGP sessions to use any operational
loopback interface (1..8) for TCP connections. Zero
interface means to restore the interface assignment to the
closest interface, which is called the best local address."
::= { snBgp4NeighGenCfgEntry 12 }
snBgp4NeighGenCfgRouteRefClient OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To configure the router as a BGP route reflector,
enable the specified neighbor as its client.
When all the clients are disabled, the local router
is no longer a route reflector."
::= { snBgp4NeighGenCfgEntry 13 }
snBgp4NeighGenCfgRemovePrivateAs OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To enable/disable filtering private AS number."
::= { snBgp4NeighGenCfgEntry 14 }
snBgp4NeighGenCfgEbgpMultihopTtl OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The EBGP Muitihop TTL for this neighbor."
::= { snBgp4NeighGenCfgEntry 15 }
snBgp4NeighGenCfgShutdown OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To enable/disable BGP4 Nbr Shutdown."
::= { snBgp4NeighGenCfgEntry 16 }
snBgp4NeighGenCfgKeepAliveTime OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Keep alive timer."
::= { snBgp4NeighGenCfgEntry 17 }
snBgp4NeighGenCfgHoldTime OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Hold time timer."
::= { snBgp4NeighGenCfgEntry 18 }
snBgp4NeighGenCfgDefOrigMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An octet string of the route-map name, each character of the name
is represented by one octet."
::= { snBgp4NeighGenCfgEntry 19 }
snBgp4NeighGenCfgDesc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An octet string of the neighbor description."
::= { snBgp4NeighGenCfgEntry 20 }
snBgp4NeighGenCfgPass OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..80))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An octet string of the neighbor Md5 password."
::= { snBgp4NeighGenCfgEntry 21 }
-- Bgp4 Neighbor Distribute Group Table
snBgp4NeighDistGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnBgp4NeighDistGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Bgp4 Neighbor Distribute Group table."
::= { snBgp4NeighDistGroup 1 }
snBgp4NeighDistGroupEntry OBJECT-TYPE
SYNTAX SnBgp4NeighDistGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Bgp4 Distribute Group table."
INDEX { snBgp4NeighDistGroupNeighIp, snBgp4NeighDistGroupDir }
::= { snBgp4NeighDistGroupTable 1 }
SnBgp4NeighDistGroupEntry ::= SEQUENCE {
snBgp4NeighDistGroupNeighIp
IpAddress,
snBgp4NeighDistGroupDir
INTEGER,
snBgp4NeighDistGroupAccessList
OCTET STRING,
snBgp4NeighDistGroupRowStatus
INTEGER,
snBgp4NeighDistGroupInFilterList
OCTET STRING,
snBgp4NeighDistGroupOutFilterList
OCTET STRING,
snBgp4NeighDistGroupInIpAccessList
OCTET STRING,
snBgp4NeighDistGroupOutIpAccessList
OCTET STRING,
snBgp4NeighDistGroupInPrefixList
OCTET STRING,
snBgp4NeighDistGroupOutPrefixList
OCTET STRING
}
snBgp4NeighDistGroupNeighIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP Address for a neighbor entry."
::= { snBgp4NeighDistGroupEntry 1 }
snBgp4NeighDistGroupDir OBJECT-TYPE
SYNTAX INTEGER { out(0), in(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The incoming/outgoing advertisements to which
the access list is applied."
::= { snBgp4NeighDistGroupEntry 2 }
snBgp4NeighDistGroupAccessList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFF. There are 16 of them.
This integer number is represented by 2 OCTETs."
::= { snBgp4NeighDistGroupEntry 3 }
snBgp4NeighDistGroupRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snBgp4NeighDistGroupEntry 4 }
snBgp4NeighDistGroupInFilterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFF. There are 16 of them.
This integer number is represented by 2 OCTETs."
::= { snBgp4NeighDistGroupEntry 5 }
snBgp4NeighDistGroupOutFilterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFF. There are 16 of them.
This integer number is represented by 2 OCTETs."
::= { snBgp4NeighDistGroupEntry 6 }
snBgp4NeighDistGroupInIpAccessList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFF. There are 1 of them.
This integer number is represented by 2 OCTETs."
::= { snBgp4NeighDistGroupEntry 7 }
snBgp4NeighDistGroupOutIpAccessList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFF. There are 1 of them.
This integer number is represented by 2 OCTETs."
::= { snBgp4NeighDistGroupEntry 8 }
snBgp4NeighDistGroupInPrefixList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A Prefix name list. "
::= { snBgp4NeighDistGroupEntry 9 }
snBgp4NeighDistGroupOutPrefixList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A Prefix name list. "
::= { snBgp4NeighDistGroupEntry 10 }
-- Bgp4 Neighbor Filter Group Table
snBgp4NeighFilterGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnBgp4NeighFilterGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Bgp4 Neighbor Filter Group table."
::= { snBgp4NeighFilterGroup 1 }
snBgp4NeighFilterGroupEntry OBJECT-TYPE
SYNTAX SnBgp4NeighFilterGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Bgp4 Neighbor Filter Group table."
INDEX { snBgp4NeighFilterGroupNeighIp, snBgp4NeighFilterGroupDir }
::= { snBgp4NeighFilterGroupTable 1 }
SnBgp4NeighFilterGroupEntry ::= SEQUENCE {
snBgp4NeighFilterGroupNeighIp
IpAddress,
snBgp4NeighFilterGroupDir
INTEGER,
snBgp4NeighFilterGroupAccessList
OCTET STRING,
snBgp4NeighFilterGroupRowStatus
INTEGER,
snBgp4NeighFilterGroupInFilterList
OCTET STRING,
snBgp4NeighFilterGroupOutFilterList
OCTET STRING,
snBgp4NeighFilterGroupInAsPathAccessList
OCTET STRING,
snBgp4NeighFilterGroupOutAsPathAccessList
OCTET STRING,
snBgp4NeighFilterGroupWeight
INTEGER,
snBgp4NeighFilterGroupWeightAccessList
OCTET STRING
}
snBgp4NeighFilterGroupNeighIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP Address for a neighbor entry."
::= { snBgp4NeighFilterGroupEntry 1 }
snBgp4NeighFilterGroupDir OBJECT-TYPE
SYNTAX INTEGER { out(0), in(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The incoming/outgoing advertisements to which
the access list is applied."
::= { snBgp4NeighFilterGroupEntry 2 }
snBgp4NeighFilterGroupAccessList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFF. There are 16 of them.
This integer number is represented by 2 OCTETs."
::= { snBgp4NeighFilterGroupEntry 3 }
snBgp4NeighFilterGroupRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snBgp4NeighFilterGroupEntry 4 }
snBgp4NeighFilterGroupInFilterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFF. There are 16 of them.
This integer number is represented by 2 OCTETs."
::= { snBgp4NeighFilterGroupEntry 5 }
snBgp4NeighFilterGroupOutFilterList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFF. There are 16 of them.
This integer number is represented by 2 OCTETs."
::= { snBgp4NeighFilterGroupEntry 6 }
snBgp4NeighFilterGroupInAsPathAccessList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFF. There are 1 of them.
This integer number is represented by 2 OCTETs."
::= { snBgp4NeighFilterGroupEntry 7 }
snBgp4NeighFilterGroupOutAsPathAccessList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFF. There are 1 of them.
This integer number is represented by 2 OCTETs."
::= { snBgp4NeighFilterGroupEntry 8 }
snBgp4NeighFilterGroupWeight OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To assign a weight to a neighbor filter."
::= { snBgp4NeighFilterGroupEntry 9 }
snBgp4NeighFilterGroupWeightAccessList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFF. There are 1 of them.
This integer number is represented by 2 OCTETs."
::= { snBgp4NeighFilterGroupEntry 10 }
-- Bgp4 Neighbor Route Map Table
snBgp4NeighRouteMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnBgp4NeighRouteMapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Bgp4 Neighbor Route Map table."
::= { snBgp4NeighRouteMap 1 }
snBgp4NeighRouteMapEntry OBJECT-TYPE
SYNTAX SnBgp4NeighRouteMapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Bgp4 Route Map table."
INDEX { snBgp4NeighRouteMapNeighIp, snBgp4NeighRouteMapDir }
::= { snBgp4NeighRouteMapTable 1 }
SnBgp4NeighRouteMapEntry ::= SEQUENCE {
snBgp4NeighRouteMapNeighIp
IpAddress,
snBgp4NeighRouteMapDir
INTEGER,
snBgp4NeighRouteMapMapName
OCTET STRING,
snBgp4NeighRouteMapRowStatus
INTEGER
}
snBgp4NeighRouteMapNeighIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP Address for a neighbor entry."
::= { snBgp4NeighRouteMapEntry 1 }
snBgp4NeighRouteMapDir OBJECT-TYPE
SYNTAX INTEGER { out(0), in(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The incoming/outgoing advertisements to which
the access list is applied."
::= { snBgp4NeighRouteMapEntry 2 }
snBgp4NeighRouteMapMapName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An octet string of the route-map name, Each character of the name
is represented by one octet."
::= { snBgp4NeighRouteMapEntry 3 }
snBgp4NeighRouteMapRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snBgp4NeighRouteMapEntry 4 }
-- Bgp4 Network Table
snBgp4NetworkTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnBgp4NetworkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Bgp4 Network Weight table."
::= { snBgp4Network 1 }
snBgp4NetworkEntry OBJECT-TYPE
SYNTAX SnBgp4NetworkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Bgp4 Network Weight table."
INDEX { snBgp4NetworkIp, snBgp4NetworkSubnetMask }
::= { snBgp4NetworkTable 1 }
SnBgp4NetworkEntry ::= SEQUENCE {
snBgp4NetworkIp
IpAddress,
snBgp4NetworkSubnetMask
IpAddress,
snBgp4NetworkWeight
INTEGER,
snBgp4NetworkBackdoor
INTEGER,
snBgp4NetworkRowStatus
INTEGER
}
snBgp4NetworkIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP Address for a network entry."
::= { snBgp4NetworkEntry 1 }
snBgp4NetworkSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The subnet mask for a network entry."
::= { snBgp4NetworkEntry 2 }
snBgp4NetworkWeight OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To assign a weight to a neighbor connection."
::= { snBgp4NetworkEntry 3 }
snBgp4NetworkBackdoor OBJECT-TYPE
SYNTAX INTEGER { disabled (0), enabled (1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To enable/disable the backdoor for this network."
::= { snBgp4NetworkEntry 4 }
snBgp4NetworkRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snBgp4NetworkEntry 5 }
-- BGP4 Redistribution of Routes Table
snBgp4RedisTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnBgp4RedisEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The BGP4 Redistribution contains configurations
that could be imported into the BGP4 domain."
::= { snBgp4Redis 1 }
snBgp4RedisEntry OBJECT-TYPE
SYNTAX SnBgp4RedisEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The BGP4 Redistribution Entry specifies a particular RIP
or , OSPF, or Static route to be imported into the BGP4 domain."
INDEX { snBgp4RedisProtocol }
::= { snBgp4RedisTable 1 }
SnBgp4RedisEntry ::=
SEQUENCE {
snBgp4RedisProtocol
INTEGER,
snBgp4RedisMetric
INTEGER,
snBgp4RedisRouteMap
OCTET STRING,
snBgp4RedisWeight
INTEGER,
snBgp4RedisMatchInternal
INTEGER,
snBgp4RedisMatchExternal1
INTEGER,
snBgp4RedisMatchExternal2
INTEGER,
snBgp4RedisRowStatus
INTEGER
}
snBgp4RedisProtocol OBJECT-TYPE
SYNTAX INTEGER {
rip(1),
ospf(2),
static(3),
connected(4),
isis(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The imported configuration into BGP4 domain is set in the following:
rip(1): - the RIP.
ospf(2): - the OSPF.
static(3): - the static.
connected(4): - the connected.
isis(5): - the ISIS."
::= { snBgp4RedisEntry 1 }
snBgp4RedisMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The metric of using the specified protocol Metric value."
::= { snBgp4RedisEntry 2 }
snBgp4RedisRouteMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An octet string of the route-map name, each character of the name
is represented by one octet."
::= { snBgp4RedisEntry 3 }
snBgp4RedisWeight OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To assign a weight for the specified protocol."
::= { snBgp4RedisEntry 4 }
snBgp4RedisMatchInternal OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is only applicable to the OSPF protocol."
::= { snBgp4RedisEntry 5 }
snBgp4RedisMatchExternal1 OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is only applicable to the OSPF protocol."
::= { snBgp4RedisEntry 6 }
snBgp4RedisMatchExternal2 OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is only applicable to the OSPF protocol."
::= { snBgp4RedisEntry 7 }
snBgp4RedisRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snBgp4RedisEntry 8 }
-- Bgp4 Route Map Filter table
snBgp4RouteMapFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnBgp4RouteMapFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Bgp4 RouteMap Filter table."
::= { snBgp4RouteMapFilter 1 }
snBgp4RouteMapFilterEntry OBJECT-TYPE
SYNTAX SnBgp4RouteMapFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Bgp4 RouteMap Filter table."
INDEX { snBgp4RouteMapFilterMapName, snBgp4RouteMapFilterSequenceNum}
::= { snBgp4RouteMapFilterTable 1 }
SnBgp4RouteMapFilterEntry ::= SEQUENCE {
snBgp4RouteMapFilterMapName
OCTET STRING,
snBgp4RouteMapFilterSequenceNum
INTEGER,
snBgp4RouteMapFilterAction
INTEGER,
snBgp4RouteMapFilterRowStatus
INTEGER
}
snBgp4RouteMapFilterMapName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An octet string of the route-map name, each character of the name
is represented by one octet."
::= { snBgp4RouteMapFilterEntry 1 }
snBgp4RouteMapFilterSequenceNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A sequence number for this particular route-map."
::= { snBgp4RouteMapFilterEntry 2 }
snBgp4RouteMapFilterAction OBJECT-TYPE
SYNTAX INTEGER { deny(0), permit(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the bgp address match
with this filter."
::= { snBgp4RouteMapFilterEntry 3 }
snBgp4RouteMapFilterRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snBgp4RouteMapFilterEntry 4 }
-- BGP4 Route Map Match Configuration Table
snBgp4RouteMapMatchTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnBgp4RouteMapMatchEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Bgp4 Route Map Set table."
::= { snBgp4RouteMapMatch 1 }
snBgp4RouteMapMatchEntry OBJECT-TYPE
SYNTAX SnBgp4RouteMapMatchEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Bgp4 Route Map Match table."
INDEX { snBgp4RouteMapMatchMapName, snBgp4RouteMapMatchSequenceNum }
::= { snBgp4RouteMapMatchTable 1 }
SnBgp4RouteMapMatchEntry ::= SEQUENCE {
snBgp4RouteMapMatchMapName
OCTET STRING,
snBgp4RouteMapMatchSequenceNum
INTEGER,
snBgp4RouteMapMatchAsPathFilter
OCTET STRING,
snBgp4RouteMapMatchCommunityFilter
OCTET STRING,
snBgp4RouteMapMatchAddressFilter
OCTET STRING,
snBgp4RouteMapMatchMetric
INTEGER,
snBgp4RouteMapMatchNextHopList
OCTET STRING,
snBgp4RouteMapMatchRouteType
INTEGER,
snBgp4RouteMapMatchTagList
OCTET STRING,
snBgp4RouteMapMatchRowMask
INTEGER,
snBgp4RouteMapMatchAsPathAccessList
OCTET STRING,
snBgp4RouteMapMatchCommunityList
OCTET STRING,
snBgp4RouteMapMatchAddressAccessList
OCTET STRING,
snBgp4RouteMapMatchAddressPrefixList
OCTET STRING,
snBgp4RouteMapMatchNextHopAccessList
OCTET STRING,
snBgp4RouteMapMatchNextHopPrefixList
OCTET STRING
}
snBgp4RouteMapMatchMapName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An octet string of the route-map name, each character of the name
is represented by one octet."
::= { snBgp4RouteMapMatchEntry 1 }
snBgp4RouteMapMatchSequenceNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A sequence number for this particular route-map."
::= { snBgp4RouteMapMatchEntry 2 }
snBgp4RouteMapMatchAsPathFilter OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFF and there are 10 of 2 OCTETs.
This integer number is represented by 2 OCTETs.
To match a BGP autonomous system path access list."
::= { snBgp4RouteMapMatchEntry 3 }
snBgp4RouteMapMatchCommunityFilter OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFF and there are 10 of 2 OCTETs.
This integer number is represented by 2 OCTETs.
To match a BGP community access list."
::= { snBgp4RouteMapMatchEntry 4 }
snBgp4RouteMapMatchAddressFilter OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFF and there are 10 of 2 OCTETs.
This integer number is represented by 2 OCTETs.
To match a BGP address access list."
::= { snBgp4RouteMapMatchEntry 5 }
snBgp4RouteMapMatchMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To match a metric for BGP routes."
::= { snBgp4RouteMapMatchEntry 6 }
snBgp4RouteMapMatchNextHopList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFF and there are 16 of 2 OCTETs.
This integer number is represented by 2 OCTETs.
To match a BGP next-hop access list."
::= { snBgp4RouteMapMatchEntry 7 }
snBgp4RouteMapMatchRouteType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
external(1),
externalType1(2),
externalType2(3),
internal(4),
local(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To match a route-type.
Currently only externalType1(2),
externalType2(3), internal(4) is supported for SNMP-SET."
::= { snBgp4RouteMapMatchEntry 8 }
snBgp4RouteMapMatchTagList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To match a BGP tag access list."
::= { snBgp4RouteMapMatchEntry 9 }
snBgp4RouteMapMatchRowMask OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used together with above
MIBs in the same VARBIND to set and
reset any MIBs in the table.
The bit number is referred to the
snBgp4RouteMapMatchEntry number
of each row in the table.
The bit is ON - means set,
The bit is OFF - means reset"
::= { snBgp4RouteMapMatchEntry 10 }
snBgp4RouteMapMatchAsPathAccessList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs.
This integer number is represented by 4 OCTETs.
To match a BGP autonomous system path access list."
::= { snBgp4RouteMapMatchEntry 11 }
snBgp4RouteMapMatchCommunityList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs.
This integer number is represented by 4 OCTETs.
To match a BGP community access list."
::= { snBgp4RouteMapMatchEntry 12 }
snBgp4RouteMapMatchAddressAccessList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..10))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFF and there are 5 of 2 OCTETs.
This integer number is represented by 2 OCTETs.
To match a BGP address access list."
::= { snBgp4RouteMapMatchEntry 13 }
snBgp4RouteMapMatchAddressPrefixList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..170))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Prefix list
To match a BGP address access list."
::= { snBgp4RouteMapMatchEntry 14 }
snBgp4RouteMapMatchNextHopAccessList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..10))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number from 1 to 0xFFFF and there are 5 of 2 OCTETs.
This integer number is represented by 2 OCTETs.
To match a BGP address access list."
::= { snBgp4RouteMapMatchEntry 15 }
snBgp4RouteMapMatchNextHopPrefixList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..170))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Prefix list
To match a BGP address access list."
::= { snBgp4RouteMapMatchEntry 16 }
-- BGP4 Route Map Set Configuration Table
snBgp4RouteMapSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnBgp4RouteMapSetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Bgp4 Route Map Set table."
::= { snBgp4RouteMapSet 1 }
snBgp4RouteMapSetEntry OBJECT-TYPE
SYNTAX SnBgp4RouteMapSetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Bgp4 Route Map Set table."
INDEX { snBgp4RouteMapSetMapName, snBgp4RouteMapSetSequenceNum }
::= { snBgp4RouteMapSetTable 1 }
SnBgp4RouteMapSetEntry ::= SEQUENCE {
snBgp4RouteMapSetMapName
OCTET STRING,
snBgp4RouteMapSetSequenceNum
INTEGER,
snBgp4RouteMapSetAsPathType
INTEGER,
snBgp4RouteMapSetAsPathString
OCTET STRING,
snBgp4RouteMapSetAutoTag
INTEGER,
snBgp4RouteMapSetCommunityType
INTEGER,
snBgp4RouteMapSetCommunityNum
INTEGER,
snBgp4RouteMapSetCommunityAdditive
INTEGER,
snBgp4RouteMapSetLocalPreference
INTEGER,
snBgp4RouteMapSetMetric
INTEGER,
snBgp4RouteMapSetNextHop
IpAddress,
snBgp4RouteMapSetOrigin
INTEGER,
snBgp4RouteMapSetTag
INTEGER,
snBgp4RouteMapSetWeight
INTEGER,
snBgp4RouteMapSetRowMask
INTEGER,
snBgp4RouteMapSetCommunityNums
OCTET STRING,
snBgp4RouteMapSetDampenHalfLife
INTEGER,
snBgp4RouteMapSetDampenReuse
INTEGER,
snBgp4RouteMapSetDampenSuppress
INTEGER,
snBgp4RouteMapSetDampenMaxSuppress
INTEGER
}
snBgp4RouteMapSetMapName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An octet string of the route-map name, each character of the name
is represented by one octet."
::= { snBgp4RouteMapSetEntry 1 }
snBgp4RouteMapSetSequenceNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A sequence number for this particular route-map."
::= { snBgp4RouteMapSetEntry 2 }
snBgp4RouteMapSetAsPathType OBJECT-TYPE
SYNTAX INTEGER { tag(0), prepend(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To modify an autonomous system path for BGP routes.
tag(0) - Converts the tag of a route into an autonomous system path.
prepend(1) - Appends the string from snBgp4RouteMapSetAsPathString to the
as-path of the route that is matched by the route map."
::= { snBgp4RouteMapSetEntry 3 }
snBgp4RouteMapSetAsPathString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"as-path string. This string is used if only if the snBgp4RouteMapSetAsPathCmd
was sent together with the value set to prepend(1)."
::= { snBgp4RouteMapSetEntry 4 }
snBgp4RouteMapSetAutoTag OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To enable/disable the automatic-tag for BGP routes."
::= { snBgp4RouteMapSetEntry 5 }
snBgp4RouteMapSetCommunityType OBJECT-TYPE
SYNTAX INTEGER { nums(0), none(3)}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To set the BGP COMMUNITIES attribute. none means no other
community attributes are allowed, nums means allowing community
attributesi, the old values 1 and 2 are not valid since 5.03.00"
::= { snBgp4RouteMapSetEntry 6 }
snBgp4RouteMapSetCommunityNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS deprecated
DESCRIPTION
"community-number. This number is used if only if the snBgp4RouteMapSetCommunityCmd
was sent together with the value set to number(0)."
::= { snBgp4RouteMapSetEntry 7 }
snBgp4RouteMapSetCommunityAdditive OBJECT-TYPE
SYNTAX INTEGER { disabled(0), enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To add the community to the already existing communities."
::= { snBgp4RouteMapSetEntry 8 }
snBgp4RouteMapSetLocalPreference OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To modify a local-preference for BGP routes."
::= { snBgp4RouteMapSetEntry 9 }
snBgp4RouteMapSetMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To modify a metric for BGP routes."
::= { snBgp4RouteMapSetEntry 10 }
snBgp4RouteMapSetNextHop OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To modify the IP address of the next hop for BGP routes."
::= { snBgp4RouteMapSetEntry 11 }
snBgp4RouteMapSetOrigin OBJECT-TYPE
SYNTAX INTEGER { igp(0), egp(1), incomplete(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To set the BGP origin code."
::= { snBgp4RouteMapSetEntry 12 }
snBgp4RouteMapSetTag OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To specify the tag for BGP routes."
::= { snBgp4RouteMapSetEntry 13 }
snBgp4RouteMapSetWeight OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To specify the BGP weight for the routing table."
::= { snBgp4RouteMapSetEntry 14 }
snBgp4RouteMapSetRowMask OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used together with above
MIBs in the same VARBIND to set and
reset any MIBs in the table.
The bit number is referred to the
snBgp4RouteMapSetEntry number
of each row in the table.
The bit is ON - means set,
The bit is OFF - means reset"
::= { snBgp4RouteMapSetEntry 15 }
snBgp4RouteMapSetCommunityNums OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..24))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Community number is from 1 to 0xFFFFFFFF. There are 6 of them.
This integer number is represented by 4 OCTETs."
::= { snBgp4RouteMapSetEntry 16 }
snBgp4RouteMapSetDampenHalfLife OBJECT-TYPE
SYNTAX INTEGER (1..45)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bgp4 Route Map Dampening Half Life."
::= { snBgp4RouteMapSetEntry 17 }
snBgp4RouteMapSetDampenReuse OBJECT-TYPE
SYNTAX INTEGER (1..20000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bgp4 Route Map Dampening Reuse."
::= { snBgp4RouteMapSetEntry 18 }
snBgp4RouteMapSetDampenSuppress OBJECT-TYPE
SYNTAX INTEGER (1..20000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bgp4 Route Map Dampening Suppress."
::= { snBgp4RouteMapSetEntry 19 }
snBgp4RouteMapSetDampenMaxSuppress OBJECT-TYPE
SYNTAX INTEGER (1..20000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bgp4 Route Map Dampening Max Suppress Time."
::= { snBgp4RouteMapSetEntry 20 }
-- Bgp4 Neighbor Operational Status Table
snBgp4NeighOperStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnBgp4NeighOperStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Bgp4 Neighbor Operational Status table."
::= { snBgp4NeighOperStatus 1 }
snBgp4NeighOperStatusEntry OBJECT-TYPE
SYNTAX SnBgp4NeighOperStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Bgp4 Operational Status table."
INDEX { snBgp4NeighOperStatusIndex }
::= { snBgp4NeighOperStatusTable 1 }
SnBgp4NeighOperStatusEntry ::= SEQUENCE {
snBgp4NeighOperStatusIndex
INTEGER,
snBgp4NeighOperStatusIp
IpAddress,
snBgp4NeighOperStatusRemoteAs
INTEGER,
snBgp4NeighOperStatusBgpType
INTEGER,
snBgp4NeighOperStatusState
INTEGER,
snBgp4NeighOperStatusKeepAliveTime
INTEGER,
snBgp4NeighOperStatusHoldTime
INTEGER,
snBgp4NeighOperStatusAdvertlevel
INTEGER,
snBgp4NeighOperStatusKeepAliveTxCounts
Counter,
snBgp4NeighOperStatusKeepAliveRxCounts
Counter,
snBgp4NeighOperStatusUpdateTxCounts
Counter,
snBgp4NeighOperStatusUpdateRxCounts
Counter,
snBgp4NeighOperStatusNotifTxCounts
Counter,
snBgp4NeighOperStatusNotifRxCounts
Counter,
snBgp4NeighOperStatusOpenTxCounts
Counter,
snBgp4NeighOperStatusOpenRxCounts
Counter
}
snBgp4NeighOperStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index for a neighbor entry."
::= { snBgp4NeighOperStatusEntry 1 }
snBgp4NeighOperStatusIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP Address for a neighbor entry."
::= { snBgp4NeighOperStatusEntry 2 }
snBgp4NeighOperStatusRemoteAs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To show a neighbor with an autonomous system number(AS)."
::= { snBgp4NeighOperStatusEntry 3 }
snBgp4NeighOperStatusBgpType OBJECT-TYPE
SYNTAX INTEGER { ebgp(0), ibgp(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To show the type of BGP protocol whether is internal or external."
::= { snBgp4NeighOperStatusEntry 4 }
snBgp4NeighOperStatusState OBJECT-TYPE
SYNTAX INTEGER {
noState(0),
idle(1),
connect(2),
active(3),
openSent(4),
openConfirm(5),
established(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To show the state of this neighbor."
::= { snBgp4NeighOperStatusEntry 5 }
snBgp4NeighOperStatusKeepAliveTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Keep alive timer."
::= { snBgp4NeighOperStatusEntry 6 }
snBgp4NeighOperStatusHoldTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Hold time timer."
::= { snBgp4NeighOperStatusEntry 7 }
snBgp4NeighOperStatusAdvertlevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To show the minimum interval between the
sending of BGP routing updates."
::= { snBgp4NeighOperStatusEntry 8 }
snBgp4NeighOperStatusKeepAliveTxCounts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Keep alive message sent counts."
::= { snBgp4NeighOperStatusEntry 9 }
snBgp4NeighOperStatusKeepAliveRxCounts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Keep alive message received counts."
::= { snBgp4NeighOperStatusEntry 10 }
snBgp4NeighOperStatusUpdateTxCounts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Update message sent counts."
::= { snBgp4NeighOperStatusEntry 11 }
snBgp4NeighOperStatusUpdateRxCounts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Update message received counts."
::= { snBgp4NeighOperStatusEntry 12 }
snBgp4NeighOperStatusNotifTxCounts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Notification message sent counts."
::= { snBgp4NeighOperStatusEntry 13 }
snBgp4NeighOperStatusNotifRxCounts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Notification message received counts."
::= { snBgp4NeighOperStatusEntry 14 }
snBgp4NeighOperStatusOpenTxCounts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Open message sent counts."
::= { snBgp4NeighOperStatusEntry 15 }
snBgp4NeighOperStatusOpenRxCounts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Open message received counts."
::= { snBgp4NeighOperStatusEntry 16 }
-- Bgp4 Routes Operational Status Table
snBgp4RouteOperStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnBgp4RouteOperStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Bgp4 Routebor Operational Status table."
::= { snBgp4RouteOperStatus 1 }
snBgp4RouteOperStatusEntry OBJECT-TYPE
SYNTAX SnBgp4RouteOperStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Bgp4 Operational Status table."
INDEX { snBgp4RouteOperStatusIndex }
::= { snBgp4RouteOperStatusTable 1 }
SnBgp4RouteOperStatusEntry ::= SEQUENCE {
snBgp4RouteOperStatusIndex
INTEGER,
snBgp4RouteOperStatusIp
IpAddress,
snBgp4RouteOperStatusSubnetMask
IpAddress,
snBgp4RouteOperStatusNextHop
IpAddress,
snBgp4RouteOperStatusMetric
INTEGER,
snBgp4RouteOperStatusLocalPreference
INTEGER,
snBgp4RouteOperStatusWeight
INTEGER,
snBgp4RouteOperStatusOrigin
INTEGER,
snBgp4RouteOperStatusStatus
INTEGER,
snBgp4RouteOperStatusRouteTag
INTEGER,
snBgp4RouteOperStatusCommunityList
OCTET STRING,
snBgp4RouteOperStatusAsPathList
OCTET STRING
}
snBgp4RouteOperStatusIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index for a route entry."
::= { snBgp4RouteOperStatusEntry 1 }
snBgp4RouteOperStatusIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP Address for a route entry."
::= { snBgp4RouteOperStatusEntry 2 }
snBgp4RouteOperStatusSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP Subnet Mask for a route entry."
::= { snBgp4RouteOperStatusEntry 3 }
snBgp4RouteOperStatusNextHop OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The next-hop IP for a route entry."
::= { snBgp4RouteOperStatusEntry 4 }
snBgp4RouteOperStatusMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To show the metric value of a route entry."
::= { snBgp4RouteOperStatusEntry 5 }
snBgp4RouteOperStatusLocalPreference OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To show the local preference of a route entry."
::= { snBgp4RouteOperStatusEntry 6 }
snBgp4RouteOperStatusWeight OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To show the weight of this route."
::= { snBgp4RouteOperStatusEntry 7 }
snBgp4RouteOperStatusOrigin OBJECT-TYPE
SYNTAX INTEGER {
igp(0),
egp(1),
incomplete(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To show the origin of this route."
::= { snBgp4RouteOperStatusEntry 8 }
snBgp4RouteOperStatusStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A bit array that contains the status of this route.
This is a packed bit string; The following shows the
meaning of each bit:
(bit 0 is the least significant bit and 0=FALSE, 1=TRUE).
bit position meaning
------------ -------
6-31 reserved.
5 aggregate.
4 best.
3 internal.
2 local.
1 suppressed.
0 valid."
::= { snBgp4RouteOperStatusEntry 9 }
snBgp4RouteOperStatusRouteTag OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To show the route tag of this route."
::= { snBgp4RouteOperStatusEntry 10 }
snBgp4RouteOperStatusCommunityList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To show the community list of this route.
If the community list is an NULL string that means an empty list, then
the community is INTERNET. A number from 1 to 0xFFFFFFFF.
This integer number is represented by 4 OCTETs.
In the community list, it could have some Well-known numbers such as:
BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01
BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02"
::= { snBgp4RouteOperStatusEntry 11 }
snBgp4RouteOperStatusAsPathList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To show the AS Path list of this route.
A number from 1 to 0xFFFF.
This integer number is represented by 2 OCTETs."
::= { snBgp4RouteOperStatusEntry 12 }
-- Bgp4 Neighbor Summary Table
snBgp4NeighborSummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnBgp4NeighborSummaryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Bgp4 Routebor Operational Status table."
::= { snBgp4NeighborSummary 1 }
snBgp4NeighborSummaryEntry OBJECT-TYPE
SYNTAX SnBgp4NeighborSummaryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Bgp4 Operational Status table."
INDEX { snBgp4NeighborSummaryIndex }
::= { snBgp4NeighborSummaryTable 1 }
SnBgp4NeighborSummaryEntry ::= SEQUENCE {
snBgp4NeighborSummaryIndex
INTEGER,
snBgp4NeighborSummaryIp
IpAddress,
snBgp4NeighborSummaryState
INTEGER,
snBgp4NeighborSummaryStateChgTime
INTEGER,
snBgp4NeighborSummaryRouteReceived
INTEGER,
snBgp4NeighborSummaryRouteInstalled
INTEGER
}
snBgp4NeighborSummaryIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index for a route entry."
::= { snBgp4NeighborSummaryEntry 1 }
snBgp4NeighborSummaryIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP Address for a route entry."
::= { snBgp4NeighborSummaryEntry 2 }
snBgp4NeighborSummaryState OBJECT-TYPE
SYNTAX INTEGER {
noState(0),
idle(1),
connect(2),
active(3),
openSent(4),
openConfirm(5),
established(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To show the state of this neighbor."
::= { snBgp4NeighborSummaryEntry 3 }
snBgp4NeighborSummaryStateChgTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time of a change of the state of this neighbor."
::= { snBgp4NeighborSummaryEntry 4 }
snBgp4NeighborSummaryRouteReceived OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of routes received of this neighbor."
::= { snBgp4NeighborSummaryEntry 5 }
snBgp4NeighborSummaryRouteInstalled OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of routes installed of this neighbor."
::= { snBgp4NeighborSummaryEntry 6 }
-- Bgp4 Attribute Entries Table
snBgp4AttributeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnBgp4AttributeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Bgp4 Attribute entries table."
::= { snBgp4Attribute 1 }
snBgp4AttributeEntry OBJECT-TYPE
SYNTAX SnBgp4AttributeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Bgp4 Attribute table."
INDEX { snBgp4AttributeIndex }
::= { snBgp4AttributeTable 1 }
SnBgp4AttributeEntry ::= SEQUENCE {
snBgp4AttributeIndex
INTEGER,
snBgp4AttributeNextHop
IpAddress,
snBgp4AttributeMetric
INTEGER,
snBgp4AttributeOrigin
INTEGER,
snBgp4AttributeAggregatorAs
INTEGER,
snBgp4AttributeRouterId
IpAddress,
snBgp4AttributeAtomicAggregatePresent
INTEGER,
snBgp4AttributeLocalPreference
INTEGER,
snBgp4AttributeCommunityList
OCTET STRING,
snBgp4AttributeAsPathList
OCTET STRING,
snBgp4AttributeOriginator
IpAddress,
snBgp4AttributeClusterList
OCTET STRING
}
snBgp4AttributeIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index for a route entry."
::= { snBgp4AttributeEntry 1 }
snBgp4AttributeNextHop OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The next-hop IP for a route entry."
::= { snBgp4AttributeEntry 2 }
snBgp4AttributeMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To show the metric value of a route entry."
::= { snBgp4AttributeEntry 3 }
snBgp4AttributeOrigin OBJECT-TYPE
SYNTAX INTEGER {
igp(0),
egp(1),
incomplete(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To show the origin of this route."
::= { snBgp4AttributeEntry 4 }
snBgp4AttributeAggregatorAs OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The aggregator AS number for an attribute entry."
::= { snBgp4AttributeEntry 5 }
snBgp4AttributeRouterId OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The router ID for an attribute entry."
::= { snBgp4AttributeEntry 6 }
snBgp4AttributeAtomicAggregatePresent OBJECT-TYPE
SYNTAX INTEGER { false(0), true(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The atomic aggregate present in an attribute entry."
::= { snBgp4AttributeEntry 7 }
snBgp4AttributeLocalPreference OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To show the local preference of a route entry."
::= { snBgp4AttributeEntry 8 }
snBgp4AttributeCommunityList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To show the community list of this attribute entry.
If the community list is an NULL string that means an empty list, then
the community is INTERNET. A number from 1 to 0xFFFFFFFF.
This integer number is represented by 4 OCTETs.
In the community list, it could have some Well-known numbers such as:
BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01
BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02"
::= { snBgp4AttributeEntry 9 }
snBgp4AttributeAsPathList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To show the AS Path list of this attribute entry.
A number from 1 to 0xFFFF.
This integer number is represented by 2 OCTETs."
::= { snBgp4AttributeEntry 10 }
snBgp4AttributeOriginator OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The originator IP address for an attribute entry."
::= { snBgp4AttributeEntry 11 }
snBgp4AttributeClusterList OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To show the cluster list of this attribute entry.
If the cluster list is an NULL string, it means an empty list.
Otherwise, the list is a group of cluster ID which is
represented by 4 OCTETs IP address."
::= { snBgp4AttributeEntry 12 }
-- Bgp4 Clear Neighbor Command Table
snBgp4ClearNeighborCmdTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnBgp4ClearNeighborCmdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Clear Bgp4 command table."
::= { snBgp4ClearNeighborCmd 1 }
snBgp4ClearNeighborCmdEntry OBJECT-TYPE
SYNTAX SnBgp4ClearNeighborCmdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the clear Bgp4 neighbor command table."
INDEX { snBgp4ClearNeighborCmdIp }
::= { snBgp4ClearNeighborCmdTable 1 }
SnBgp4ClearNeighborCmdEntry ::= SEQUENCE {
snBgp4ClearNeighborCmdIp
IpAddress,
snBgp4ClearNeighborCmdElement
INTEGER
}
snBgp4ClearNeighborCmdIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP Address for a neighbor entry.
If the IP address is 255.255.255.255, it
means for all neighbors."
::= { snBgp4ClearNeighborCmdEntry 1 }
snBgp4ClearNeighborCmdElement OBJECT-TYPE
SYNTAX INTEGER {
valid(0),
lastPacketWithError(1),
notificationErrors(2),
softOutbound(3),
traffic(4),
neighbor(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To send the command element of this neighbor for value(1) to (5)
valid(0) is received in SNMP-get."
::= { snBgp4ClearNeighborCmdEntry 2 }
-- Bgp4 Neighbor Prefix Group Table
snBgp4NeighPrefixGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnBgp4NeighPrefixGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Bgp4 Neighbor Prefix Group table."
::= { snBgp4NeighPrefixGroup 1 }
snBgp4NeighPrefixGroupEntry OBJECT-TYPE
SYNTAX SnBgp4NeighPrefixGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Bgp4 Prefix Group table."
INDEX { snBgp4NeighPrefixGroupNeighIp, snBgp4NeighPrefixGroupDir }
::= { snBgp4NeighPrefixGroupTable 1 }
SnBgp4NeighPrefixGroupEntry ::= SEQUENCE {
snBgp4NeighPrefixGroupNeighIp
IpAddress,
snBgp4NeighPrefixGroupDir
INTEGER,
snBgp4NeighPrefixGroupInAccessList
OCTET STRING,
snBgp4NeighPrefixGroupOutAccessList
OCTET STRING,
snBgp4NeighPrefixGroupRowStatus
INTEGER
}
snBgp4NeighPrefixGroupNeighIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP Address for a neighbor entry."
::= { snBgp4NeighPrefixGroupEntry 1 }
snBgp4NeighPrefixGroupDir OBJECT-TYPE
SYNTAX INTEGER { out(0), in(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The incoming/outgoing advertisements to which
the access list is applied."
::= { snBgp4NeighPrefixGroupEntry 2 }
snBgp4NeighPrefixGroupInAccessList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An in access prefix list name. "
::= { snBgp4NeighPrefixGroupEntry 3 }
snBgp4NeighPrefixGroupOutAccessList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An out prefix list name. "
::= { snBgp4NeighPrefixGroupEntry 4 }
snBgp4NeighPrefixGroupRowStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2),
delete(3),
create(4),
modify(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisting row
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:
noSuch(0)...no such row
invalid(1)...Setting it to 'invalid' has the effect of
rendering it inoperative..
valid(2)....the row exists and is valid"
::= { snBgp4NeighPrefixGroupEntry 5 }
END
HP-SN-POS-GROUP-MIB DEFINITIONS ::= BEGIN
-- Foundry POS Group MIB Release 1.0.0
-- Revision 0 10/28/99
-- Copyright 1996-1999 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry Networks SNMP Management Information Base Specification
-- (Specification) embodies Foundry Networks' confidential and
-- proprietary intellectual property. Foundry Networks retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS," and Foundry Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
-- SECTION 1: Top Level Definitions
-- Imports
IMPORTS
Counter, Gauge
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
snPOS
FROM HP-SN-ROOT-MIB;
-- textual conventions
-- maximum of ports are 32.
-- Status Values
POSStatus ::= INTEGER { disabled(0), enabled(1) }
DisplayString ::=
OCTET STRING
-- This data type is used to model textual information taken
-- from the NVT ASCII character set. By convention, objects
-- with this syntax are declared as having
--
-- SIZE (0..255)
snPOSInfo OBJECT IDENTIFIER ::= { snPOS 1 }
-- POS Port table information
snPOSInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnPOSInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A specific snPOSInfo group consists of a number of
switch ports. "
::= { snPOSInfo 1 }
snPOSInfoEntry OBJECT-TYPE
SYNTAX SnPOSInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the snPOSInfo table indicates the
configuration on a specified port. A SNMP SET PDU
for a row of the snPOSInfoTable requires the entired
sequence of the MIB Objects in each
snPOSInfoEntry stored in one PDU. Otherwise,
GENERR return-value will be returned."
INDEX {
snPOSInfoPortNum
}
::= { snPOSInfoTable 1 }
SnPOSInfoEntry ::= SEQUENCE {
snPOSInfoPortNum
INTEGER,
snPOSIfIndex
INTEGER,
snPOSDescr
DisplayString,
snPOSName
DisplayString,
snPOSInfoSpeed
INTEGER,
snPOSInfoAdminStatus
INTEGER,
snPOSInfoLinkStatus
INTEGER,
snPOSInfoClock
INTEGER,
snPOSInfoLoopBack
INTEGER,
snPOSInfoScrambleATM
POSStatus,
snPOSInfoFraming
INTEGER,
snPOSInfoCRC
INTEGER,
snPOSInfoKeepAlive
INTEGER,
snPOSInfoFlagC2
INTEGER,
snPOSInfoFlagJ0
INTEGER,
snPOSInfoFlagH1
INTEGER,
snPOSStatsInFrames
Counter,
snPOSStatsOutFrames
Counter,
snPOSStatsAlignErrors
Counter,
snPOSStatsFCSErrors
Counter,
snPOSStatsFrameTooLongs
Counter,
snPOSStatsFrameTooShorts
Counter,
snPOSStatsInDiscard
Counter,
snPOSStatsOutDiscard
Counter,
snPOSInOctets
OCTET STRING,
snPOSOutOctets
OCTET STRING,
snPOSStatsInBitsPerSec
Gauge,
snPOSStatsOutBitsPerSec
Gauge,
snPOSStatsInPktsPerSec
Gauge,
snPOSStatsOutPktsPerSec
Gauge,
snPOSStatsInUtilization
INTEGER (0..10000),
snPOSStatsOutUtilization
INTEGER (0..10000),
snPOSTagType
INTEGER,
snPOSStatsB1
Counter,
snPOSStatsB2
Counter,
snPOSStatsB3
Counter,
snPOSStatsAIS
Counter,
snPOSStatsRDI
Counter,
snPOSStatsLOP
Counter,
snPOSStatsLOF
Counter,
snPOSStatsLOS
Counter
}
snPOSInfoPortNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port index.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number (slot for chassis only)."
::= { snPOSInfoEntry 1 }
snPOSIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In order to identify a particular interface, this
object shall identify the instance of the ifIndex
object, defined in RFC 1213 and RFC 1573."
::= { snPOSInfoEntry 2 }
snPOSDescr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A textual string containing the slot/port information
about the interface."
::= { snPOSInfoEntry 3 }
snPOSName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Port Name string."
::= { snPOSInfoEntry 4 }
snPOSInfoSpeed OBJECT-TYPE
SYNTAX INTEGER {
s155000(1),
s622000(2),
other(3),
s2488000(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The speed configuration for a port. The values are:
155000
622000
2488000
"
::= { snPOSInfoEntry 5 }
snPOSInfoAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3) -- in some test mode
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The desired state of all ports. The
testing(3) state indicates that no operational
packets can be passed.
(same as ifAdminStatus in MIB-II)"
::= { snPOSInfoEntry 6 }
snPOSInfoLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3) -- in some test mode
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
(same as ifOperStatus in MIB-II)"
::= { snPOSInfoEntry 7 }
snPOSInfoClock OBJECT-TYPE
SYNTAX INTEGER {
internal(1),
line(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clock default internal"
::= { snPOSInfoEntry 8 }
snPOSInfoLoopBack OBJECT-TYPE
SYNTAX INTEGER {
line(1),
internal(2),
none(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Loop back default none"
::= { snPOSInfoEntry 9 }
snPOSInfoScrambleATM OBJECT-TYPE
SYNTAX POSStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"ATM style scrambling default off"
::= { snPOSInfoEntry 10 }
snPOSInfoFraming OBJECT-TYPE
SYNTAX INTEGER {
sonet(1),
sdh(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Framing default SONET"
::= { snPOSInfoEntry 11 }
snPOSInfoCRC OBJECT-TYPE
SYNTAX INTEGER {
crc32bits(1),
crc16bits(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"CRC default 32 bit"
::= { snPOSInfoEntry 12 }
snPOSInfoKeepAlive OBJECT-TYPE
SYNTAX INTEGER (0..32767)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Keep-alive default 10"
::= { snPOSInfoEntry 13 }
snPOSInfoFlagC2 OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C2 flag"
::= { snPOSInfoEntry 14 }
snPOSInfoFlagJ0 OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"J0 flag"
::= { snPOSInfoEntry 15 }
snPOSInfoFlagH1 OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"H1 flag"
::= { snPOSInfoEntry 16 }
snPOSStatsInFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of packets received on the interface."
::= { snPOSInfoEntry 17 }
snPOSStatsOutFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of packets transmitted out of the interface."
::= { snPOSInfoEntry 18 }
snPOSStatsAlignErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"dot3StatsAlignmentErrors : A count of frames
received on a particular interface that are
not an integral number of octets in length
and do not pass the FCS check.
The count represented by an instance of this
object is incremented when the alignmentError
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions obtain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC."
::= { snPOSInfoEntry 19 }
snPOSStatsFCSErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"dot3StatsFCSErrors : A count of frames received
on a particular interface that are an integral
number of octets in length but do not pass the
FCS check.
The count represented by an instance of this
object is incremented when the frameCheckError
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions obtain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC."
::= { snPOSInfoEntry 20 }
snPOSStatsFrameTooLongs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"dot3StatsFrameTooLongs : A count of frames
received on a particular interface that
exceed the maximum permitted frame size.
The count represented by an instance of this
object is incremented when the frameTooLong
status is returned by the MAC service to the
LLC (or other MAC user). Received frames for
which multiple error conditions obtain are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC."
::= { snPOSInfoEntry 21 }
snPOSStatsFrameTooShorts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A count of frames received on a particular
interface that below the minimum permitted
frame size."
::= { snPOSInfoEntry 22 }
snPOSStatsInDiscard OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet could be to free up
buffer space."
::= { snPOSInfoEntry 23 }
snPOSStatsOutDiscard OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer space."
::= { snPOSInfoEntry 24 }
snPOSInOctets OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of octets received on the interface,
including framing characters. This object is a 64-bit
counter of the ifInOctets object, defined in RFC 1213.
The octet string is in big-endian byte order."
::= { snPOSInfoEntry 25 }
snPOSOutOctets OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of octets transmitted out of the interface,
including framing characters. This object is a 64-bit
counter of the ifOutOctets object, defined in RFC 1213.
The octet string is in big-endian byte order."
::= { snPOSInfoEntry 26 }
snPOSStatsInBitsPerSec OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bits per second received on the interface
over a 5 minutes interval."
::= { snPOSInfoEntry 27 }
snPOSStatsOutBitsPerSec OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bits per second transmitted out of the interface
over a 5 minutes interval."
::= { snPOSInfoEntry 28 }
snPOSStatsInPktsPerSec OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets per second received on the interface
over a 5 minutes interval."
::= { snPOSInfoEntry 29 }
snPOSStatsOutPktsPerSec OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets per second transmitted out of the interface
over a 5 minutes interval."
::= { snPOSInfoEntry 30 }
snPOSStatsInUtilization OBJECT-TYPE
SYNTAX INTEGER (0..10000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input network utilization in hundredths of a percent
over a 5 minutes interval."
::= { snPOSInfoEntry 31 }
snPOSStatsOutUtilization OBJECT-TYPE
SYNTAX INTEGER (0..10000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The output network utilization in hundredths of a percent
over a 5 minutes interval."
::= { snPOSInfoEntry 32 }
snPOSTagType OBJECT-TYPE
SYNTAX INTEGER {
tagged(1),
untagged(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"For tagged port, we could have multiple VLANs
per port."
::= {snPOSInfoEntry 33}
snPOSStatsB1 OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Section error monitoring."
::= { snPOSInfoEntry 34 }
snPOSStatsB2 OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Line error monitoring."
::= { snPOSInfoEntry 35 }
snPOSStatsB3 OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Path error monitoring."
::= { snPOSInfoEntry 36 }
snPOSStatsAIS OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Alarm indication signal."
::= { snPOSInfoEntry 37 }
snPOSStatsRDI OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Remote defect indication."
::= { snPOSInfoEntry 38 }
snPOSStatsLOP OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Loss of pointer."
::= { snPOSInfoEntry 39 }
snPOSStatsLOF OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Loss of frame."
::= { snPOSInfoEntry 40 }
snPOSStatsLOS OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Loss of signal."
::= { snPOSInfoEntry 41 }
END
-- *****************************************************************
-- Commited Access Rate MIB file.
-- *****************************************************************
HP-CAR-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,
Gauge
FROM RFC1155-SMI
Counter64
FROM SNMPv2-SMI
snCAR
FROM HP-SN-SWITCH-GROUP-MIB;
snPortCARs OBJECT IDENTIFIER ::= { snCAR 1 }
PacketSource ::= INTEGER {
input(0), --for inbound traffic
output(1) --for outbound traffic
}
RateLimitType ::= INTEGER {
all(3), -- all traffic.
quickAcc(2), -- traffic matches rate-limit's access list.
standardAcc(1) -- traffic matches standard access list.
}
RateLimitAction ::= INTEGER {
continue(1),
drop(2),
precedCont(3),
precedXmit(4),
xmit(5)
}
snPortCARTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnPortCAREntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of rate limit configuration entries.
Rate Limit is a method of traffic control. It allows a set
of rate limits to be configured and applied to packets flowing
into/out of an interface to regulate network traffic."
::= { snPortCARs 1 }
snPortCAREntry OBJECT-TYPE
SYNTAX SnPortCAREntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A collection of rate-limit configuration objects on this
interface."
INDEX { snPortCARifIndex, snPortCARDirection, snPortCARRowIndex }
::= { snPortCARTable 1 }
SnPortCAREntry ::=
SEQUENCE {
snPortCARifIndex
INTEGER,
snPortCARDirection
PacketSource,
snPortCARRowIndex
INTEGER,
snPortCARType
RateLimitType,
snPortCARAccIdx
INTEGER,
snPortCARRate
INTEGER,
snPortCARLimit
INTEGER,
snPortCARExtLimit
INTEGER,
snPortCARConformAction
RateLimitAction,
snPortCARExceedAction
RateLimitAction,
snPortCARStatSwitchedPkts
Counter64,
snPortCARStatSwitchedBytes
Counter64,
snPortCARStatFilteredPkts
Counter64,
snPortCARStatFilteredBytes
Counter64,
snPortCARStatCurBurst
Gauge
}
snPortCARifIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ifIndex value for this rate limit entry."
::= { snPortCAREntry 1 }
snPortCARDirection OBJECT-TYPE
SYNTAX PacketSource
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input or output transmission direction for the
Rate Limit object.
input (0), --for inbound traffic
output(1) --for outbound traffic "
::= { snPortCAREntry 2 }
snPortCARRowIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for rate limit objects.
It increases as the rate limit entries are added.
Skips the number when a row is deleted."
::= { snPortCAREntry 3 }
snPortCARType OBJECT-TYPE
SYNTAX RateLimitType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of traffic rate-limited against."
::= { snPortCAREntry 4 }
snPortCARAccIdx OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the access list if RateLimitType is either
quickAcc or standardAcc."
::= { snPortCAREntry 5 }
snPortCARRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The comitted access rate. This determines the long term
average transmission rate. Traffic that falls under this
rate always conforms. This is average rate in bits per
second."
::= { snPortCAREntry 6 }
snPortCARLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the normal burst size that determines how large traffic
bursts can be before some traffic exceeds the rate limit. This
specifies the number of bytes that are guaranteed to be transported
by the network at the average rate under normal conditions during
committed time interval. This normal burst size is in bytes."
::= { snPortCAREntry 7 }
snPortCARExtLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the extended burst limit that determines how large traffic
bursts can be before all the traffic exceeds the rate limit. This
burst size is in bytes."
::= { snPortCAREntry 8 }
snPortCARConformAction OBJECT-TYPE
SYNTAX RateLimitAction
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Action to be taken when the traffic is within
the Rate Limit.
drop drop the packet.
xmit transmit the packet.
continue continue to evaluate to the subsequent
rate limits.
precedXmit rewrite the IP precedence and transmit
the packet.
precedCont rewrite the IP precedence and allow it
evaluated by subsequent rate limits."
::= { snPortCAREntry 9 }
snPortCARExceedAction OBJECT-TYPE
SYNTAX RateLimitAction
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Action to be taken when the traffic exceeds
the Rate Limit.drop
drop the packet.
xmit transmit the packet.
continue continue to evaluate to the subsequent
rate limits.
precedXmit rewrite the IP precedence and transmit
the packet.
precedCont rewrite the IP precedence and allow it
evaluated by subsequent rate limits."
::= { snPortCAREntry 10 }
snPortCARStatSwitchedPkts OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counter of packets permitted by this rate limit."
::= { snPortCAREntry 11 }
snPortCARStatSwitchedBytes OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counter of bytes permitted by this interface."
::= { snPortCAREntry 12 }
snPortCARStatFilteredPkts OBJECT-TYPE
SYNTAX Counter64
--UNITS "packets"
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counter of packets which exceeded this rate limit."
::= { snPortCAREntry 13 }
snPortCARStatFilteredBytes OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counter of bytes which exceeded this rate limit."
::= { snPortCAREntry 14 }
snPortCARStatCurBurst OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current received burst size."
::= { snPortCAREntry 15 }
-- end of snPortCARTable
END
-- *****************************************************************
-- Foundry Commited Access Rate MIB file.
-- *****************************************************************
HP-VLAN-CAR-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,
Gauge
FROM RFC1155-SMI
Counter64
FROM SNMPv2-SMI
PacketSource, RateLimitType, RateLimitAction
FROM HP-CAR-MIB
snVLanCAR
FROM HP-SN-SWITCH-GROUP-MIB;
snVLanCARs OBJECT IDENTIFIER ::= { snVLanCAR 1 }
snVLanCARTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnVLanCAREntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of rate limit configuration entries for a vlan.
Rate Limit is a method of traffic control. It allows a set
of rate limits to be configured and applied to packets flowing
into/out of an interface to regulate network traffic."
::= { snVLanCARs 1 }
snVLanCAREntry OBJECT-TYPE
SYNTAX SnVLanCAREntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A collection of rate-limit configuration objects on this
vlan."
INDEX { snVLanCARVLanId, snVLanCARDirection, snVLanCARRowIndex }
::= { snVLanCARTable 1 }
SnVLanCAREntry ::=
SEQUENCE {
snVLanCARDirection
PacketSource,
snVLanCARVLanId
INTEGER,
snVLanCARRowIndex
INTEGER,
snVLanCARType
RateLimitType,
snVLanCARAccIdx
INTEGER,
snVLanCARRate
INTEGER,
snVLanCARLimit
INTEGER,
snVLanCARExtLimit
INTEGER,
snVLanCARConformAction
RateLimitAction,
snVLanCARExceedAction
RateLimitAction,
snVLanCARStatSwitchedPkts
Counter64,
snVLanCARStatSwitchedBytes
Counter64,
snVLanCARStatFilteredPkts
Counter64,
snVLanCARStatFilteredBytes
Counter64,
snVLanCARStatCurBurst
Gauge
}
--need to refer to the vlan table
--index once it is changed to single
--vlan id as the row index
snVLanCARVLanId OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VLAN ID as one of the indices of this table .
Each VLAN ID can have a membership of multiple
ports."
::= { snVLanCAREntry 1 }
snVLanCARDirection OBJECT-TYPE
SYNTAX PacketSource
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input or output transmission direction for the
Rate Limit object."
::= { snVLanCAREntry 2 }
snVLanCARRowIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for rate limit objects.
It increases as the rate limit entries are added.
Skips the number when a row is deleted."
::= { snVLanCAREntry 3 }
snVLanCARType OBJECT-TYPE
SYNTAX RateLimitType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of traffic rate-limited against."
::= { snVLanCAREntry 4 }
snVLanCARAccIdx OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the access list if RateLimitType is either
quickAcc or standardAcc."
::= { snVLanCAREntry 5 }
snVLanCARRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The comitted access rate. This determines the long term
average transmission rate. Traffic that falls under this
rate always conforms. This is average rate in bits per
second."
::= { snVLanCAREntry 6 }
snVLanCARLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the normal burst size that determines how large traffic
bursts can be before some traffic exceeds the rate limit. This
specifies the number of bytes that are guaranteed to be transported
by the network at the average rate under normal conditions during
committed time interval. This normal burst size is in bytes."
::= { snVLanCAREntry 7 }
snVLanCARExtLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the extended burst limit that determines how large traffic
bursts can be before all the traffic exceeds the rate limit. This
burst size is in bytes. "
::= { snVLanCAREntry 8 }
snVLanCARConformAction OBJECT-TYPE
SYNTAX RateLimitAction
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Action to be taken when the traffic is within
the Rate Limit.
drop drop the packet.
xmit transmit the packet.
continue continue to evaluate to the subsequent
rate limits.
precedXmit rewrite the IP precedence and transmit
the packet.
precedCont rewrite the IP precedence and allow it
evaluated by subsequent rate limits."
::= { snVLanCAREntry 9 }
snVLanCARExceedAction OBJECT-TYPE
SYNTAX RateLimitAction
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Action to be taken when the traffic exceeds
the Rate Limit.
drop drop the packet.
xmit transmit the packet.
continue continue to evaluate to the subsequent
rate limits.
precedXmit rewrite the IP precedence and transmit
the packet.
precedCont rewrite the IP precedence and allow it
evaluated by subsequent rate limits."
::= { snVLanCAREntry 10 }
snVLanCARStatSwitchedPkts OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counter of packets permitted by this rate limit."
::= { snVLanCAREntry 11 }
snVLanCARStatSwitchedBytes OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counter of bytes permitted by this interface."
::= { snVLanCAREntry 12 }
snVLanCARStatFilteredPkts OBJECT-TYPE
SYNTAX Counter64
--UNITS "packets"
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counter of packets which exceeded this rate limit."
::= { snVLanCAREntry 13 }
snVLanCARStatFilteredBytes OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counter of bytes which exceeded this rate limit."
::= { snVLanCAREntry 14 }
snVLanCARStatCurBurst OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current received burst size."
::= { snVLanCAREntry 15 }
-- end of snVLanCARTable
END
HP-SN-IP-ACL-MIB DEFINITIONS ::= BEGIN
-- Imports
IMPORTS
IpAddress
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
Counter64
FROM SNMPv2-SMI
snIp
FROM HP-SN-ROOT-MIB;
-- textual conventions
DisplayString ::= OCTET STRING
-- RtrStatus Values
RtrStatus ::= INTEGER { disabled(0), enabled (1) }
-- Row Status
SnRowStatus ::= INTEGER {
other(1),
valid(2),
delete(3),
create(4)
}
-- Action
Action ::= INTEGER { deny(0), permit(1) }
-- Boolean Values
TruthVal ::= INTEGER { false (0), true (1) }
-- ACL number
AclNumber ::= INTEGER (1..199)
-- Operator
Operator ::= INTEGER { eq(0), neq(1), lt(2), gt(3), range(4), undefined(7) }
-- IP Protocol
IpProtocol ::= INTEGER (0..255)
-- Precedence Value
PrecedenceValue ::= INTEGER { critical(5), flash(3), flashoverride(4),
immediate(2), internet(6), network(7),
priority(1), routine(0), undefined(8) }
-- Tos Value
TosValue ::= INTEGER {
normal(0),
minMonetaryCost(1),
maxReliability(2),
tosValue3(3),
maxThroughput(4),
tosValue5(5),
tosValue6(6),
tosValue7(7),
minDelay(8),
tosValue9(9),
tosValue10(10),
tosValue11(11),
tosValue12(12),
tosValue13(13),
tosValue14(14),
tosValue15(15),
undefined(16)
}
-- Direction
Direction ::= INTEGER { inbound(0), outbound(1) }
------Access Control List
snAgAcl OBJECT IDENTIFIER ::= { snIp 15 }
snAgAclGlobal OBJECT IDENTIFIER ::= { snAgAcl 1 }
snAgAclGblCurRowIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current row index of the ACL table entry."
::= { snAgAclGlobal 1 }
--
-- ACL Table
--
snAgAclTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnAgAclEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of Access Control List"
::= { snAgAcl 2 }
snAgAclEntry OBJECT-TYPE
SYNTAX SnAgAclEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the IP access control list table."
INDEX { snAgAclIndex }
::= { snAgAclTable 1 }
SnAgAclEntry ::= SEQUENCE {
snAgAclIndex
INTEGER,
snAgAclNumber
AclNumber,
snAgAclName
DisplayString,
snAgAclAction
Action,
snAgAclProtocol
IpProtocol,
snAgAclSourceIp
IpAddress,
snAgAclSourceMask
IpAddress,
snAgAclSourceOperator
Operator,
snAgAclSourceOperand1
INTEGER,
snAgAclSourceOperand2
INTEGER,
snAgAclDestinationIp
IpAddress,
snAgAclDestinationMask
IpAddress,
snAgAclDestinationOperator
Operator,
snAgAclDestinationOperand1
INTEGER,
snAgAclDestinationOperand2
INTEGER,
snAgAclPrecedence
PrecedenceValue,
snAgAclTos
TosValue,
snAgAclEstablished
RtrStatus,
snAgAclLogOption
TruthVal,
snAgAclStandardFlag
TruthVal,
snAgAclRowStatus
SnRowStatus,
snAgAclFlowCounter
Counter64,
snAgAclPacketCounter
Counter64,
snAgAclComments
DisplayString,
snAgAclIpPriority
INTEGER,
snAgAclPriorityForce
INTEGER,
snAgAclPriorityMapping
INTEGER,
snAgAclDscpMarking
INTEGER,
snAgAclDscpMapping
INTEGER
}
snAgAclIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The access control list item number for an entry.
This is a unique number that identifies different
Access list entries combined with the access list
name and access list number. This one has to be
unique even though the name and number are not unique
for a give access list with same or different source
address, subnet mask, destination address and destination
mask, protocol type, action (permit/deny) type and the
operator (neq, eq, gt and , lt) which makes the index a
unique tuple (name, number, itemnumber)."
::= { snAgAclEntry 1 }
snAgAclNumber OBJECT-TYPE
SYNTAX AclNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The access control list number for an entry.
The standard access list is in the range <1..99>.
The extended access list is in the range <100-199>."
::= { snAgAclEntry 2 }
snAgAclName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"ACL name for an entry."
::= { snAgAclEntry 3 }
snAgAclAction OBJECT-TYPE
SYNTAX Action
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Action to take if the ip packet matches
with this access control list."
::= { snAgAclEntry 4 }
snAgAclProtocol OBJECT-TYPE
SYNTAX IpProtocol
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Transport protocol. 0 means any protocol."
::= { snAgAclEntry 5 }
snAgAclSourceIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source IP address."
::= { snAgAclEntry 6 }
snAgAclSourceMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Source IP subnet mask."
::= { snAgAclEntry 7 }
snAgAclSourceOperator OBJECT-TYPE
SYNTAX Operator
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Type of comparison to perform.
for now, this only applys to tcp or udp
to compare the port number"
::= { snAgAclEntry 8 }
snAgAclSourceOperand1 OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For now this only refers to transport
protocol port number. 0 means NA"
::= { snAgAclEntry 9 }
snAgAclSourceOperand2 OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For now this only refers to transport
protocol port number. 0 means NA"
::= { snAgAclEntry 10 }
snAgAclDestinationIp OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP address."
::= { snAgAclEntry 11 }
snAgAclDestinationMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Destination IP subnet mask."
::= { snAgAclEntry 12 }
snAgAclDestinationOperator OBJECT-TYPE
SYNTAX Operator
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Type of comparison to perform.
for now, this only applys to tcp or udp
to compare the port number"
::= { snAgAclEntry 13 }
snAgAclDestinationOperand1 OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For now this only refers to transport
protocol port number. 0 means NA"
::= { snAgAclEntry 14 }
snAgAclDestinationOperand2 OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For now this only refers to transport
protocol port number. 0 means NA"
::= { snAgAclEntry 15 }
snAgAclPrecedence OBJECT-TYPE
SYNTAX PrecedenceValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This refers to IP precedence value in the range <0-7>
critical(5),
flash(3),
flash-override(4),
immediate(2),
internet(6),
network(7),
priority(1),
routine(0)"
::= { snAgAclEntry 16 }
snAgAclTos OBJECT-TYPE
SYNTAX TosValue
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This refers to the IP type of service value in range
<0-15> which is the sum of numeric vlaues of the
following options -
match packets with maximum reliability TOS (2)
match packets with maximum throughput TOS (4)
match packets with minimum delay (8)
match packets with minimum monetary cost TOS (1)
match packets with normal TOS (0)"
::= { snAgAclEntry 17 }
snAgAclEstablished OBJECT-TYPE
SYNTAX RtrStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable the filtering of established TCP
packets of which the ACK or RESET flag is on. This
additional filter only applies to TCP transport
protocol."
::= { snAgAclEntry 18 }
snAgAclLogOption OBJECT-TYPE
SYNTAX TruthVal
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Log flag"
::= { snAgAclEntry 19 }
snAgAclStandardFlag OBJECT-TYPE
SYNTAX TruthVal
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Return whether the ACL is standard or extended, 1 for standard ACL"
::= { snAgAclEntry 20 }
snAgAclRowStatus OBJECT-TYPE
SYNTAX SnRowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a access list
entry."
::= { snAgAclEntry 21 }
snAgAclFlowCounter OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Approximate count of flows matching individual ACL entry."
::= { snAgAclEntry 22 }
snAgAclPacketCounter OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Accurate count of packets matching individual ACL entry."
::= { snAgAclEntry 23 }
snAgAclComments OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Remark description of individual ACL entry."
::= { snAgAclEntry 24 }
snAgAclIpPriority OBJECT-TYPE
SYNTAX INTEGER(0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"QoS priority option for IP ACL entry."
::= { snAgAclEntry 25 }
snAgAclPriorityForce OBJECT-TYPE
SYNTAX INTEGER(0..4)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Force packet outgoing priority. Not defined(4)"
::= { snAgAclEntry 26 }
snAgAclPriorityMapping OBJECT-TYPE
SYNTAX INTEGER(0..8)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Map incoming packet priority. Not defined(8)"
::= { snAgAclEntry 27 }
snAgAclDscpMarking OBJECT-TYPE
SYNTAX INTEGER(0..64)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Mark packets with given DSCP value. Not defined(64)"
::= { snAgAclEntry 28 }
snAgAclDscpMapping OBJECT-TYPE
SYNTAX INTEGER(0..64)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Map incoming DSCP value. Not defined(64)"
::= { snAgAclEntry 29 }
--
-- Acl Port Table
snAgAclBindToPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnAgAclBindToPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of ACL binding to port for router"
::= { snAgAcl 3 }
snAgAclBindToPortEntry OBJECT-TYPE
SYNTAX SnAgAclBindToPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the ACL-binding-to-port table."
INDEX {
snAgAclPortNum,
snAgAclPortBindDirection
}
::= { snAgAclBindToPortTable 1 }
SnAgAclBindToPortEntry ::= SEQUENCE {
snAgAclPortNum
INTEGER,
snAgAclPortBindDirection
Direction,
snAgAclNum
INTEGER,
snAgAclNameString
DisplayString,
snAgBindPortListInVirtualInterface
OCTET STRING,
snAgAclPortRowStatus
SnRowStatus
}
snAgAclPortNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Binding-to port num, either physical port or virtual interface."
::= { snAgAclBindToPortEntry 1 }
snAgAclPortBindDirection OBJECT-TYPE
SYNTAX Direction
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ACL port direction, inbound or outbound"
::= { snAgAclBindToPortEntry 2 }
snAgAclNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Defined ACL number"
::= { snAgAclBindToPortEntry 3 }
snAgAclNameString OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Defined ACL name"
::= { snAgAclBindToPortEntry 4 }
snAgBindPortListInVirtualInterface OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Port list for binding virtual interface"
::= { snAgAclBindToPortEntry 5 }
snAgAclPortRowStatus OBJECT-TYPE
SYNTAX SnRowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To create or delete a ACL port entry."
::= { snAgAclBindToPortEntry 6 }
END
HP-SN-MPLS-TC-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, Unsigned32, Integer32
FROM SNMPv2-SMI
transmission
FROM RFC1213-MIB
TEXTUAL-CONVENTION
FROM SNMPv2-TC
snMpls
FROM HP-SN-ROOT-MIB;
mplsTCMIB MODULE-IDENTITY
LAST-UPDATED "200101041200Z" -- 4 January 2002 12:00:00 GMT
ORGANIZATION
"Multiprotocol Label Switching (MPLS) Working Group"
CONTACT-INFO
" Thomas D. Nadeau
Cisco Systems, Inc.
tnadeau@cisco.com
Joan Cucchiara
Crescent Networks
jcucchiara@crescentnetworks.com
Cheenu Srinivasan
Parama Networks, Inc.
cheenu@paramanet.com
Arun Viswanathan
Force10 Networks, Inc.
arun@force10networks.com
Hans Sjostrand
ipUnplugged
hans@ipunplugged.com
Email comments to the MPLS WG Mailing List at
mpls@uu.net."
DESCRIPTION
"This MIB module defines Textual Conventions and
OBJECT-IDENTITIES for use in documents defining
management information bases (MIBs) for managing
MPLS networks."
-- Revision history.
REVISION
"200101041200Z" -- 4 January 2002 12:00:00 GMT
DESCRIPTION
"Initial version published as part of RFC XXXX."
::= { mplsMIB 1 }
-- This object identifier needs to be assigned by IANA.
-- Since mpls has been assigned an ifType of 166 we recommend
-- that this OID be 166 as well.
mplsMIB OBJECT IDENTIFIER
::= { snMpls 15 }
-- Textual Conventions (sorted alphabetically).
MplsAtmVcIdentifier ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The VCI value for a VCL. The maximum VCI value
cannot exceed the value allowable by
atmInterfaceMaxVciBits defined in ATM-MIB. The
minimum value is 32, values 0 to 31 are reserved
for other uses by the ITU and ATM Forum. 32 is
typically the default value for the Control VC."
REFERENCE
"Definitions of Textual Conventions and OBJECT-
IDENTITIES for ATM Management, RFC 2514, Feb.
1999."
SYNTAX Integer32 (32..65535)
MplsBitRate ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An estimate of bandwidth in units of 1,000 bits per
second. If this object reports a value of 'n' then
the rate of the object is somewhere in the range of
'n-500' to 'n+499'. For objects which do not vary
in bit rate, or for those where no accurate
estimation can be made, this object should contain
the nominal bit rate."
SYNTAX Integer32 (1..2147483647)
MplsBurstSize ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The number of octets of MPLS data that the stream
may send back-to-back without concern for
policing."
SYNTAX Unsigned32 (1..4294967295)
MplsExtendedTunnelId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A unique identifier for an MPLS Tunnel. This MAY
represent an IpV4 address of the ingress or egress
LSR for the tunnel. This value is derived from the
Extended Tunnel Id in RSVP or the Ingress Router ID
for CR-LDP."
REFERENCE
"1. Awduche, D., et al., RSVP-TE: Extensions to RSVP
for LSP Tunnels, RFC 3209, December 2001.
2. Constraint-Based LSP Setup using LDP, Jamoussi,
B., et al., draft-ietf-mpls-cr-ldp-06.txt, November
2001."
SYNTAX Unsigned32
MplsInitialCreationSource ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The entity that originally created the object in
question. The values of this enumeration are
defined as follows:
other(1) - This is used when an entity which has not
been enumerated in this textual convention but
which is known by the agent.
snmp(2) - The Simple Network Management Protocol was
used to configure this object initially.
ldp(3 - The Label Distribution Protocol was used to
configure this object initially.
rsvp(4) - The Resource Reservation Protocol was used
to configure this object initially.
crldp(5) - The Constraint-Based Label Distribution
Protocol was used to configure this object
initially.
policyAgent(6) - A policy agent (perhaps in
combination with one of the above protocols) was
used to configure this object initially.
unknown(7) - the agent cannot discern which
component created the object."
SYNTAX INTEGER {
other(1),
snmp(2),
ldp(3),
rsvp(4),
crldp(5),
policyAgent(6),
unknown (7)
}
MplsLSPID ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An identifier that is assigned to each LSP and is
used to uniquely identify it. This is assigned at
the head end of the LSP and can be used by all LSRs
to identify this LSP. This value is piggybacked by
the signaling protocol when this LSP is signaled
within the network. This identifier can then be
used at each LSR to identify which labels are being
swapped to other labels for this LSP. For IPv4
addresses this results in a 6-octet long cookie."
SYNTAX OCTET STRING (SIZE (0..31))
MplsLabel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This value represents an MPLS label as defined in
[RFC3031], [RFC3032], [RFC3034] and [RFC3035]."
REFERENCE
"1. Multiprotocol Label Switching Architecture, Rosen
et al, RFC 3031, August 1999.
2. MPLS Label Stack Encoding, Rosen et al, RFC 3032,
January 2001.
3. Use of Label Switching on Frame Relay Networks,
Conta et al, RFC 3034, January 2001.
4. MPLS using LDP and ATM VC switching, Davie et al,
RFC 3035, January 2001."
SYNTAX Unsigned32 (0..4294967295)
MplsLdpGenAddr ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value of an network layer or data link layer
address."
SYNTAX OCTET STRING (SIZE (0..64))
MplsLdpIdentifier ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The LDP identifier is a six octet quantity which is
used to identify an Label Switch Router (LSR) label
space.
The first four octets identify the LSR and must be a
globally unique value, such as a 32-bit router ID
assigned to the LSR, and the last two octets
identify a specific label space within the LSR."
SYNTAX OCTET STRING (SIZE (6))
MplsLdpLabelTypes ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Layer 2 label types which are defined for MPLS
LDP/CRLDP are generic(1), atm(2), or
frameRelay(3)."
SYNTAX INTEGER {
generic(1),
atm(2),
frameRelay(3)
}
MplsLsrIdentifier ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Label Switch Router (LSR) identifier is the
first 4 bytes of the Label Distribution Protocol
(LDP) identifier."
SYNTAX OCTET STRING (SIZE (4))
MplsPathIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A unique identifier used to identify a specific path
used by a tunnel."
SYNTAX Unsigned32
MplsPathIndexOrZero ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A unique identifier used to identify a specific path
used by a tunnel. If this value is set to 0, it
indicates that no path is in use."
SYNTAX Unsigned32
MplsPortNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A TCP or UDP port number. Along with an IP address
identifies a stream of IP traffic uniquely."
SYNTAX Integer32 (0..65535)
MplsTunnelAffinity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Include-any, include-all, or exclude-all constraint
for link selection."
SYNTAX Unsigned32
MplsTunnelIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Index into mplsTunnelTable."
SYNTAX Integer32 (1..65535)
MplsTunnelInstanceIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Instance index into mplsTunnelTable."
SYNTAX Unsigned32 (0..65535)
END
HP-SN-MPLS-LSR-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Integer32, Counter32, Unsigned32, Counter64, Gauge32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
TruthValue, RowStatus, StorageType, RowPointer,
TimeStamp
FROM SNMPv2-TC
InterfaceIndex, InterfaceIndexOrZero
FROM IF-MIB
mplsMIB, MplsLSPID, MplsLabel, MplsBitRate, MplsBurstSize,
MplsInitialCreationSource
FROM HP-SN-MPLS-TC-MIB
AddressFamilyNumbers
FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB
InetAddressIPv4, InetAddressIPv6, InetAddressType
FROM INET-ADDRESS-MIB
snMpls
FROM HP-SN-ROOT-MIB;
mplsLsrMIB MODULE-IDENTITY
LAST-UPDATED "200201041200Z" -- 4 January 2002 12:00:00 GMT
ORGANIZATION "Multiprotocol Label Switching (MPLS) Working Group"
CONTACT-INFO
"
Cheenu Srinivasan
Postal: Parama Networks, Inc.
1030 Broad Street
Shrewsbury, NJ 07702
Tel: +1-732-544-9120 x731
Email: cheenu@paramanet.com
Arun Viswanathan
Postal: Force10 Networks, Inc.
1440 McCarthy Blvd
Milpitas, CA 95035
Tel: +1-408-571-3516
Email: arun@force10networks.com
Thomas D. Nadeau
Postal: Cisco Systems, Inc.
250 Apollo Drive
Chelmsford, MA 01824
Tel: +1-978-244-3051
Email: tnadeau@cisco.com
"
DESCRIPTION
"This MIB contains managed object definitions for the
Multiprotocol Label Switching (MPLS) Router as
defined in: Rosen, E., Viswanathan, A., and R.
Callon, Multiprotocol Label Switching Architecture,
RFC 3031, January 2001."
-- Revision history.
REVISION
"200201041200Z" -- 4 January 2002 12:00:00 GMT
DESCRIPTION
"Initial revision, published as part of RFC XXXX."
::= { mplsMIB 2 }
-- Top level components of this MIB.
-- Tables, Scalars
mplsLsrObjects OBJECT IDENTIFIER ::= { mplsLsrMIB 1 }
-- Notifications
mplsLsrNotifications OBJECT IDENTIFIER ::= { mplsLsrMIB 2 }
mplsLsrNotifyPrefix OBJECT IDENTIFIER ::= { mplsLsrNotifications 0 }
-- conformance
mplsLsrConformance OBJECT IDENTIFIER ::= { mplsLsrMIB 3 }
-- MPLS Interface Configuration Table.
mplsInterfaceConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsInterfaceConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies per-interface MPLS capability
and associated information."
::= { mplsLsrObjects 1 }
mplsInterfaceConfEntry OBJECT-TYPE
SYNTAX MplsInterfaceConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by an LSR for
every interface capable of supporting MPLS. Each
entry in this table will exist only if a
corresponding entry in ifTable exists. If the
associated entry in ifTable is deleted, the
corresponding entry in this table must also be
deleted shortly thereafter. The entry with index 0
represents the per-platform label space and contains
parameters that apply to all interfaces that
participate in the per-platform label space. Other
entries defined in this table represent additional
MPLS interfaces that may participate in either the
per-platform or per-interface label spaces, or both.
Additional information about label space
participation of an interface is provided in the
description clause of
mplsInterfaceLabelParticipationType."
INDEX { mplsInterfaceConfIndex }
::= { mplsInterfaceConfTable 1 }
MplsInterfaceConfEntry ::= SEQUENCE {
mplsInterfaceConfIndex InterfaceIndexOrZero,
mplsInterfaceLabelMinIn MplsLabel,
mplsInterfaceLabelMaxIn MplsLabel,
mplsInterfaceLabelMinOut MplsLabel,
mplsInterfaceLabelMaxOut MplsLabel,
mplsInterfaceTotalBandwidth MplsBitRate,
mplsInterfaceAvailableBandwidth MplsBitRate,
mplsInterfaceLabelParticipationType BITS
}
mplsInterfaceConfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a unique index for an entry in the
MplsInterfaceConfTable. A non-zero index for an
entry indicates the ifIndex for the corresponding
interface entry in of the MPLS-layer in the ifTable.
Note that the per-platform label space may apply to
several interfaces, and therefore the configuration
of the per-platform label space interface parameters
will apply to all of the interfaces that are
participating in the per-platform label space."
REFERENCE
"RFC 2863 - The Interfaces Group MIB, McCloghrie, K.,
and F. Kastenholtz, June 2000"
::= { mplsInterfaceConfEntry 1 }
mplsInterfaceLabelMinIn OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the minimum value of an MPLS label that this
LSR is willing to receive on this interface."
::= { mplsInterfaceConfEntry 2 }
mplsInterfaceLabelMaxIn OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the maximum value of an MPLS label that this
LSR is willing to receive on this interface."
::= { mplsInterfaceConfEntry 3 }
mplsInterfaceLabelMinOut OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the minimum value of an MPLS label that this
LSR is willing to send on this interface."
::= { mplsInterfaceConfEntry 4 }
mplsInterfaceLabelMaxOut OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the maximum value of an MPLS label that this
LSR is willing to send on this interface."
::= { mplsInterfaceConfEntry 5 }
mplsInterfaceTotalBandwidth OBJECT-TYPE
SYNTAX MplsBitRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates the total amount of usable
bandwidth on this interface and is specified in
kilobits per second (Kbps). This variable is not
applicable when applied to the interface with index
0. When this value cannot be measured, this value
should contain the nominal bandwidth."
::= { mplsInterfaceConfEntry 6 }
mplsInterfaceAvailableBandwidth OBJECT-TYPE
SYNTAX MplsBitRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates the total amount of available
bandwidth available on this interface and is
specified in kilobits per second (Kbps). This value
is calculated as the difference between the amount
of bandwidth currently in use and that specified in
mplsInterfaceTotalBandwidth. This variable is not
applicable when applied to the interface with index
0. When this value cannot be measured, this value
should contain the nominal bandwidth."
::= { mplsInterfaceConfEntry 7 }
mplsInterfaceLabelParticipationType OBJECT-TYPE
SYNTAX BITS {
perPlatform (0),
perInterface (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Either the perPlatform(0) or perInterface(1) bit
MUST be set. If the value of the
mplsInterfaceConfIndex for this entry is zero, then
only the perPlatform(0) bit MUST be set and the
perInterface(1) bit is meaningless. If the
perInterface(1) bit is set then the value of
mplsInterfaceLabelMinIn, mplsInterfaceLabelMaxIn,
mplsInterfaceLabelMinOut, and
mplsInterfaceLabelMaxOut for this entry reflect the
label ranges for this interface. If only the
perPlatform(0) bit is set, then the value of
mplsInterfaceLabelMinIn, mplsInterfaceLabelMaxIn,
mplsInterfaceLabelMinOut, and
mplsInterfaceLabelMaxOut for this entry must be
identical to the instance of these objects with
index 0."
REFERENCE
"Rosen, E., Viswanathan, A., and R. Callon,
Multiprotocol Label Switching Architecture, RFC
3031, January 2001."
::= { mplsInterfaceConfEntry 8 }
-- End of mplsInterfaceConfTable
-- MPLS Interface Performance Table.
mplsInterfacePerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsInterfacePerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides MPLS performance information on
a per-interface basis."
::= { mplsLsrObjects 2 }
mplsInterfacePerfEntry OBJECT-TYPE
SYNTAX MplsInterfacePerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by the LSR for
every interface capable of supporting MPLS. Its is
an extension to the mplsInterfaceConfEntry table."
AUGMENTS { mplsInterfaceConfEntry }
::= { mplsInterfacePerfTable 1 }
MplsInterfacePerfEntry ::= SEQUENCE {
-- incoming direction
mplsInterfaceInLabelsUsed Gauge32,
mplsInterfaceFailedLabelLookup Counter32,
-- outgoing direction
mplsInterfaceOutLabelsUsed Gauge32,
mplsInterfaceOutFragments Counter32
}
mplsInterfaceInLabelsUsed OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object counts the number of labels that are in
use at this point in time on this interface in the
incoming direction. If the interface participates in
the per-platform label space only, then this
instance of this object MUST be identical with the
instance with index 0. If the interface participates
in the per-interface label space, then this instance
of this object MUST represent the number of of per-
interface labels that are in use at this point in
time on this interface."
::= { mplsInterfacePerfEntry 1 }
mplsInterfaceFailedLabelLookup OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object counts the number of labeled packets
that have been received on this interface and were
discarded because there was no matching cross-
connect entry. This object MUST count on a per-
interface basis regardless of which label space the
interface participates in."
::= { mplsInterfacePerfEntry 2 }
mplsInterfaceOutLabelsUsed OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object counts the number of top-most labels in
the outgoing label stacks that are in use at this
point in time on this interface. This object MUST
count on a per-interface basis regardless of which
label space the interface participates in."
::= { mplsInterfacePerfEntry 3 }
mplsInterfaceOutFragments OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object counts the number of outgoing MPLS
packets that required fragmentation before
transmission on this interface. This object MUST
count on a per-interface basis regardless of which
label space the interface participates in."
::= { mplsInterfacePerfEntry 4 }
-- In-segment table.
mplsInSegmentTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsInSegmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a collection of incoming
segments to an LSR."
::= { mplsLsrObjects 3 }
mplsInSegmentEntry OBJECT-TYPE
SYNTAX MplsInSegmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents one incoming
segment. An entry can be created by a network
administrator or an SNMP agent, or an MPLS signaling
protocol. The creator of the entry is denoted by
mplsInSegmentOwner. An entry in this table is
indexed by the ifIndex of the incoming interface and
the (top) label. The value of mplsInSegmentRowStatus
cannot be active(1)unless the ifTable entry
corresponding to mplsInSegmentIfIndex exists."
INDEX { mplsInSegmentIfIndex, mplsInSegmentLabel }
::= { mplsInSegmentTable 1 }
MplsInSegmentEntry ::= SEQUENCE {
mplsInSegmentIfIndex InterfaceIndexOrZero,
mplsInSegmentLabel MplsLabel,
mplsInSegmentNPop Integer32,
mplsInSegmentAddrFamily AddressFamilyNumbers,
mplsInSegmentXCIndex Unsigned32,
mplsInSegmentOwner MplsInitialCreationSource ,
mplsInSegmentTrafficParamPtr RowPointer,
mplsInSegmentRowStatus RowStatus,
mplsInSegmentStorageType StorageType
}
mplsInSegmentIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a unique index for an entry in the
MplsInSegmentTable. This value represents the
interface index for the incoming MPLS interface. A
value of zero represents an incoming label from the
per-platform label space. In this case, the
mplsInSegmentLabel is interpreted to be an MPLS-type
label."
::= { mplsInSegmentEntry 1 }
mplsInSegmentLabel OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The incoming label for this segment."
::= { mplsInSegmentEntry 2 }
mplsInSegmentNPop OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of labels to pop from the incoming
packet. Normally only the top label is popped from
the packet and used for all switching decisions for
that packet. Note that technologies which do not
support label popping should set this value to its
default value of 1. This object cannot be modified
if mplsInSegmentRowStatus is active(1)."
DEFVAL { 1 }
::= { mplsInSegmentEntry 3 }
mplsInSegmentAddrFamily OBJECT-TYPE
SYNTAX AddressFamilyNumbers
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IANA address family [IANAFamily] of the incoming
packet. A value of other(0) indicates that the
family type is either unknown or undefined. This
object cannot be modified if mplsInSegmentRowStatus
is active(1)."
DEFVAL { other }
::= { mplsInSegmentEntry 4 }
mplsInSegmentXCIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index into mplsXCTable which identifies which cross-
connect entry this segment is part of. A value of
zero indicates that this entry is not referred to by
any cross-connect entry. When a cross-connect entry
is created which this in-segment is a part of, this
object is automatically updated to reflect the value
of mplsXCIndex of that cross-connect entry."
DEFVAL { 0 }
::= { mplsInSegmentEntry 5 }
mplsInSegmentOwner OBJECT-TYPE
SYNTAX MplsInitialCreationSource
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes the entity that created and is responsible
for managing this segment. This object cannot be
modified if mplsInSegmentRowStatus is active(1)."
DEFVAL { unknown }
::= { mplsInSegmentEntry 6 }
mplsInSegmentTrafficParamPtr OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable represents a pointer to the traffic
parameter specification for this in-segment. This
value may point at an entry in the
mplsTrafficParamTable to indicate which
mplsTrafficParamEntry is to be assigned to this
segment. This value may optionally point at an
externally defined traffic parameter specification
table. A value of zero-dot-zero indicates best-effort
treatment. By having the same value of this object,
two or more segments can indicate resource sharing.
This object cannot be modified if
mplsInSegmentRowStatus is active(1)."
::= { mplsInSegmentEntry 7 }
mplsInSegmentRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table."
::= { mplsInSegmentEntry 8 }
mplsInSegmentStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the storage type for this
object. This object cannot be modified if
mplsInSegmentRowStatus is active(1). If this
variable is set to readOnly(5), and the
corresponding TFIB entry is removed, then the agent
must remove this row shortly thereafter."
::= { mplsInSegmentEntry 9 }
-- End of mplsInSegmentTable
-- In-segment performance table.
mplsInSegmentPerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsInSegmentPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains statistical information for
incoming MPLS segments to an LSR."
::= { mplsLsrObjects 4 }
mplsInSegmentPerfEntry OBJECT-TYPE
SYNTAX MplsInSegmentPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table contains statistical
information about one incoming segment which was
configured in the mplsInSegmentTable. The counters
in this entry should behave in a manner similar to
that of the interface."
AUGMENTS { mplsInSegmentEntry }
::= { mplsInSegmentPerfTable 1 }
MplsInSegmentPerfEntry ::= SEQUENCE {
mplsInSegmentOctets Counter32,
mplsInSegmentPackets Counter32,
mplsInSegmentErrors Counter32,
mplsInSegmentDiscards Counter32,
-- high capacity counter
mplsInSegmentHCOctets Counter64,
mplsInSegmentPerfDiscontinuityTime TimeStamp
}
mplsInSegmentOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value represents the total number of octets
received by this segment."
::= { mplsInSegmentPerfEntry 1 }
mplsInSegmentPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets received by this segment."
::= { mplsInSegmentPerfEntry 2 }
mplsInSegmentErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of errored packets received on this
segment."
::= { mplsInSegmentPerfEntry 3 }
mplsInSegmentDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of labeled packets received on this in-
segment, which were chosen to be discarded even
though no errors had been detected to prevent their
being transmitted. One possible reason for
discarding such a labeled packet could be to free up
buffer space."
::= { mplsInSegmentPerfEntry 4 }
mplsInSegmentHCOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received. This is the 64
bit version of mplsInSegmentOctets."
::= { mplsInSegmentPerfEntry 5 }
mplsInSegmentPerfDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion
at which any one or more of this segment's Counter32
or Counter64 suffered a discontinuity. If no such
discontinuities have occurred since the last re-
initialization of the local management subsystem,
then this object contains a zero value."
::= { mplsInSegmentPerfEntry 6 }
-- End of mplsInSegmentPerfTable.
-- Out-segment table.
mplsOutSegmentIndexNext OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the next appropriate value to
be used for mplsOutSegmentIndex when creating
entries in the mplsOutSegmentTable. If the number
of unassigned entries is exhausted, this object will
take on the value of 0. To obtain the
mplsOutSegmentIndex value for a new entry, the
manager must first issue a management protocol
retrieval operation to obtain the current value of
this object. The agent should modify the value to
reflect the next unassigned index after each
retrieval operation. After a manager retrieves a
value the agent will determine through its local
policy when this index value will be made available
for reuse."
::= { mplsLsrObjects 5 }
mplsOutSegmentTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsOutSegmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a representation of the outgoing
segments from an LSR."
::= { mplsLsrObjects 6 }
mplsOutSegmentEntry OBJECT-TYPE
SYNTAX MplsOutSegmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents one outgoing
segment. An entry can be created by a network
administrator or an SNMP agent, or an MPLS signaling
protocol. The object mplsOutSegmentOwner indicates
the creator of this entry. The value of
mplsOutSegmentRowStatus cannot be active(1)unless
the ifTable entry corresponding to
mplsOutSegmentIfIndex exists."
INDEX { mplsOutSegmentIndex }
::= { mplsOutSegmentTable 1 }
MplsOutSegmentEntry ::= SEQUENCE {
mplsOutSegmentIndex Unsigned32,
mplsOutSegmentIfIndex InterfaceIndexOrZero,
mplsOutSegmentPushTopLabel TruthValue,
mplsOutSegmentTopLabel MplsLabel,
mplsOutSegmentNextHopIpAddrType InetAddressType,
mplsOutSegmentNextHopIpv4Addr InetAddressIPv4,
mplsOutSegmentNextHopIpv6Addr InetAddressIPv6,
mplsOutSegmentXCIndex Unsigned32,
mplsOutSegmentOwner MplsInitialCreationSource ,
mplsOutSegmentTrafficParamPtr RowPointer,
mplsOutSegmentRowStatus RowStatus,
mplsOutSegmentStorageType StorageType
}
mplsOutSegmentIndex OBJECT-TYPE
SYNTAX Unsigned32(0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This value contains a unique index for this row.
While a value of 0 is not valid as an index for this
row it can be supplied as a valid value to index
mplsXCTable to access entries for which no out-
segment has been configured."
::= { mplsOutSegmentEntry 1 }
mplsOutSegmentIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value must contain the interface index of the
outgoing interface. This object may only take the
value of 0 during the create-and-wait row creation
operation if the management station has not yet set
the value of this object. This object cannot be
modified if mplsOutSegmentRowStatus is active(1).
The mplsOutSegmentRowStatus cannot be set to
active(1) until this object is set to a value
corresponding to a valid ifEntry."
DEFVAL { 0 }
::= { mplsOutSegmentEntry 2 }
mplsOutSegmentPushTopLabel OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value indicates whether or not a top label
should be pushed onto the outgoing packet's label
stack. The value of this variable MUST be set to
true if the outgoing interface does not support pop-
and-go (for example an ATM interface) or if it is a
tunnel origination. Note that it is considered an
error in the case that mplsOutSegmentPushTopLabel is
set to false, but the cross-connect entry which
refers to this out-segment has a non-zero
mplsLabelStackIndex. The LSR MUST ensure that this
situation does not happen. This object cannot be
modified if mplsOutSegmentRowStatus is active(1)."
::= { mplsOutSegmentEntry 3 }
mplsOutSegmentTopLabel OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If mplsOutSegmentPushTopLabel is true then this
represents the label that should be pushed onto the
top of the outgoing packet's label stack. Otherwise
this value SHOULD be set to 0 by the management
station and MUST be ignored by the agent. This
object cannot be modified if mplsOutSegmentRowStatus
is active(1)."
DEFVAL { 0 }
::= { mplsOutSegmentEntry 4 }
mplsOutSegmentNextHopIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether the next hop address is IPv4 or
IPv6. Note that a value of unknown (0) is valid
only when the outgoing interface is of type point-to-
point. This object cannot be modified if
mplsOutSegmentRowStatus is active(1)."
DEFVAL { unknown }
::= { mplsOutSegmentEntry 5 }
mplsOutSegmentNextHopIpv4Addr OBJECT-TYPE
SYNTAX InetAddressIPv4
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IPv4 Address of the next hop. Its value is
significant only when
mplsOutSegmentNextHopIpAddrType is ipV4 (1),
otherwise it SHOULD return a value of 0. This object
cannot be modified if mplsOutSegmentRowStatus is
active(1)."
::= { mplsOutSegmentEntry 6 }
mplsOutSegmentNextHopIpv6Addr OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IPv6 address of the next hop. Its value is
significant only when
mplsOutSegmentNextHopIpAddrType is ipV6 (2),
otherwise it SHOULD return a value of 0. This object
cannot be modified if mplsOutSegmentRowStatus is
active(1)."
::= { mplsOutSegmentEntry 7 }
mplsOutSegmentXCIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index into mplsXCTable which identifies which cross-
connect entry this segment is part of. A value of
zero indicates that this entry is not referred to by
any cross-connect entry. When a cross-connect entry
is created which this out-segment is a part of, this
object is automatically updated to reflect the value
of mplsXCIndex of that cross-connect entry."
DEFVAL { 0 }
::= { mplsOutSegmentEntry 8 }
mplsOutSegmentOwner OBJECT-TYPE
SYNTAX MplsInitialCreationSource
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes the entity which created and is responsible
for managing this segment. This object cannot be
modified if mplsOutSegmentRowStatus is active(1)."
DEFVAL { unknown }
::= { mplsOutSegmentEntry 9 }
mplsOutSegmentTrafficParamPtr OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable represents a pointer to the traffic
parameter specification for this out-segment. This
value may point at an entry in the
mplsTrafficParamTable to indicate which
mplsTrafficParamEntry is to be assigned to this
segment. This value may optionally point at an
externally defined traffic parameter specification
table. A value of zero-dot-zero indicates best-
effort treatment. By having the same value of this
object, two or more segments can indicate resource
sharing. This object cannot be modified if
mplsOutSegmentRowStatus is active(1)."
::= { mplsOutSegmentEntry 10 }
mplsOutSegmentRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For creating, modifying, and deleting this row."
::= { mplsOutSegmentEntry 11 }
mplsOutSegmentStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the storage type for this
object. This object cannot be modified if
mplsOutSegmentRowStatus is active(1). If this
variable is set to readOnly(5), and the
corresponding TFIB entry is removed, then the agent
must remove this row shortly thereafter."
::= { mplsOutSegmentEntry 12 }
-- End of mplsOutSegmentTable
-- Out-segment performance table.
mplsOutSegmentPerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsOutSegmentPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains statistical information about
outgoing segments from an LSR. The counters in this
entry should behave in a manner similar to that of
the interface."
::= { mplsLsrObjects 7 }
mplsOutSegmentPerfEntry OBJECT-TYPE
SYNTAX MplsOutSegmentPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table contains statistical
information about one outgoing segment configured in
mplsOutSegmentTable."
AUGMENTS { mplsOutSegmentEntry }
::= { mplsOutSegmentPerfTable 1 }
MplsOutSegmentPerfEntry ::= SEQUENCE {
mplsOutSegmentOctets Counter32,
mplsOutSegmentPackets Counter32,
mplsOutSegmentErrors Counter32,
mplsOutSegmentDiscards Counter32,
-- HC counter
mplsOutSegmentHCOctets Counter64,
mplsOutSegmentPerfDiscontinuityTime TimeStamp
}
mplsOutSegmentOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value contains the total number of octets sent
on this segment."
::= { mplsOutSegmentPerfEntry 1 }
mplsOutSegmentPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value contains the total number of packets sent
on this segment."
::= { mplsOutSegmentPerfEntry 2 }
mplsOutSegmentErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets that could not be sent due to
errors on this segment."
::= { mplsOutSegmentPerfEntry 3 }
mplsOutSegmentDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of labeled packets received on this out-
segment, which were chosen to be discarded even
though no errors had been detected to prevent their
being transmitted. One possible reason for
discarding such a labeled packet could be to free up
buffer space."
::= { mplsOutSegmentPerfEntry 4 }
mplsOutSegmentHCOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of octets sent. This is the 64 bit
version of mplsOutSegmentOctets."
::= { mplsOutSegmentPerfEntry 5 }
mplsOutSegmentPerfDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion
at which any one or more of this segment's Counter32
or Counter64 suffered a discontinuity. If no such
discontinuities have occurred since the last re-
initialization of the local management subsystem,
then this object contains a zero value."
::= { mplsOutSegmentPerfEntry 6 }
-- End of mplsOutSegmentPerfTable.
-- Cross-connect table.
mplsXCIndexNext OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to be used
for mplsXCIndex when creating entries in the
mplsXCTable. The value 0 indicates that no
unassigned entries are available. To obtain the
value of mplsXCIndex for a new entry in the
mplsXCTable, the manager issues a management
protocol retrieval operation to obtain the current
value of mplsXCIndex. After each retrieval
operation, the agent should modify the value to
reflect the next unassigned index. After a manager
retrieves a value the agent will determine through
its local policy when this index value will be made
available for reuse."
::= { mplsLsrObjects 8 }
mplsXCTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsXCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies information for switching
between LSP segments. It supports point-to-point,
point-to-multipoint and multipoint-to-point
connections. mplsLabelStackTable specifies the
label stack information for a cross-connect LSR and
is referred to from mplsXCTable."
::= { mplsLsrObjects 9 }
mplsXCEntry OBJECT-TYPE
SYNTAX MplsXCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents one cross-connect
entry. The following objects index it:
- cross-connect index mplsXCIndex that uniquely
identifies a group of cross-connect entries
- interface index of the in-segment,
mplsInSegmentIfIndex
- incoming label(s), mplsInSegmentLabel
- out-segment index, mplsOutSegmentIndex
Originating LSPs:
These are represented by using the special
combination of values mplsInSegmentIfIndex=0 and
mplsInSegmentLabel=0 as indexes. In this case the
mplsOutSegmentIndex MUST be non-zero.
Terminating LSPs:
These are represented by using the special value
mplsOutSegmentIndex=0 as index.
Special labels:
Entries indexed by reserved MPLS label values 0
through 15 imply terminating LSPs and MUST have
mplsOutSegmentIfIndex = 0. Note that situations
where LSPs are terminated with incoming label equal
to 0, should have mplsInSegmentIfIndex = 0 as well,
but can be distinguished from originating LSPs
because the mplsOutSegmentIfIndex = 0. The
mplsOutSegmentIfIndex MUST only be set to 0 in
cases of terminating LSPs.
An entry can be created by a network administrator
or by an SNMP agent as instructed by an MPLS
signaling protocol."
INDEX {
mplsXCIndex,
mplsInSegmentIfIndex,
mplsInSegmentLabel,
mplsOutSegmentIndex
}
::= { mplsXCTable 1 }
MplsXCEntry ::= SEQUENCE {
mplsXCIndex Unsigned32,
mplsXCLspId MplsLSPID,
mplsXCLabelStackIndex Unsigned32,
mplsXCIsPersistent TruthValue,
mplsXCOwner MplsInitialCreationSource ,
mplsXCRowStatus RowStatus,
mplsXCStorageType StorageType,
mplsXCAdminStatus INTEGER,
mplsXCOperStatus INTEGER
}
mplsXCIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Primary index for the conceptual row identifying a
group of cross-connect segments."
::= { mplsXCEntry 1 }
mplsXCLspId OBJECT-TYPE
SYNTAX MplsLSPID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value identifies the label switched path that
this cross-connect entry belongs to. This object
cannot be modified if mplsXCRowStatus is active(1)."
::= { mplsXCEntry 2 }
mplsXCLabelStackIndex OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Primary index into mplsLabelStackTable identifying a
stack of labels to be pushed beneath the top label.
Note that the top label identified by the out-
segment ensures that all the components of a
multipoint-to-point connection have the same
outgoing label. A value of 0 indicates that no
labels are to be stacked beneath the top label. This
object cannot be modified if mplsXCRowStatus is
active(1)."
::= { mplsXCEntry 3 }
mplsXCIsPersistent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes whether or not this cross-connect entry and
associated in- and out-segments should be restored
automatically after failures. This value MUST be
set to false in cases where this cross-connect entry
was created by a signaling protocol. This object
cannot be modified if mplsXCRowStatus is active(1)."
DEFVAL { false }
::= { mplsXCEntry 4 }
mplsXCOwner OBJECT-TYPE
SYNTAX MplsInitialCreationSource
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes the entity that created and is responsible
for managing this cross-connect. This object cannot
be modified if mplsXCRowStatus is active(1)."
::= { mplsXCEntry 5 }
mplsXCRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For creating, modifying, and deleting this row."
::= { mplsXCEntry 6 }
mplsXCStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Defines the storage type for this object. This
object cannot be modified if mplsXCRowStatus is
active(1). If this variable is set to readOnly(5),
and the corresponding TFIB entry is removed, then
the agent must remove this row shortly thereafter."
::= { mplsXCEntry 7 }
mplsXCAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3) -- in some test mode
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired operational status of this segment."
::= { mplsXCEntry 8 }
mplsXCOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- ready to pass packets
down(2),
testing(3), -- in some test mode
unknown(4), -- status cannot be determined
-- for some reason.
dormant(5),
notPresent(6), -- some component is missing
lowerLayerDown(7) -- down due to the state of
-- lower layer interfaces
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual operational status of this cross-
connect."
::= { mplsXCEntry 9 }
-- End of mplsXCTable
-- Label stack table.
mplsMaxLabelStackDepth OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum stack depth supported by this LSR."
::= { mplsLsrObjects 10 }
mplsLabelStackIndexNext OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to be used
for mplsLabelStackIndex when creating entries in the
mplsLabelStackTable. The value 0 indicates that no
unassigned entries are available. To obtain an
mplsLabelStackIndex value for a new entry, the
manager issues a management protocol retrieval
operation to obtain the current value of this
object. After each retrieval operation, the agent
should modify the value to reflect the next
unassigned index. After a manager retrieves a value
the agent will determine through its local policy
when this index value will be made available for
reuse."
::= { mplsLsrObjects 11 }
mplsLabelStackTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsLabelStackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the label stack to be pushed
onto a packet, beneath the top label. Entries into
this table are referred to from mplsXCTable."
::= { mplsLsrObjects 12 }
mplsLabelStackEntry OBJECT-TYPE
SYNTAX MplsLabelStackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents one label which is
to be pushed onto an outgoing packet, beneath the
top label. An entry can be created by a network
administrator or by an SNMP agent as instructed by
an MPLS signaling protocol."
INDEX { mplsLabelStackIndex, mplsLabelStackLabelIndex }
::= { mplsLabelStackTable 1 }
MplsLabelStackEntry ::= SEQUENCE {
mplsLabelStackIndex Unsigned32,
mplsLabelStackLabelIndex Unsigned32,
mplsLabelStackLabel MplsLabel,
mplsLabelStackRowStatus RowStatus,
mplsLabelStackStorageType StorageType
}
mplsLabelStackIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Primary index for this row identifying a stack of
labels to be pushed on an outgoing packet, beneath
the top label."
::= { mplsLabelStackEntry 1 }
mplsLabelStackLabelIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Secondary index for this row identifying one label
of the stack. Note that an entry with a smaller
mplsLabelStackLabelIndex would refer to a label
higher up the label stack and would be popped at a
downstream LSR before a label represented by a
higher mplsLabelStackLabelIndex at a downstream
LSR."
::= { mplsLabelStackEntry 2 }
mplsLabelStackLabel OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The label to pushed."
::= { mplsLabelStackEntry 3 }
mplsLabelStackRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For creating, modifying, and deleting this row."
::= { mplsLabelStackEntry 4 }
mplsLabelStackStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Defines the storage type for this object. If this
variable is set to readOnly(5), and the
corresponding TFIB entry is removed, then the agent
must remove this row shortly thereafter."
::= { mplsLabelStackEntry 5 }
-- End of mplsLabelStackTable
-- Traffic Parameter table.
mplsTrafficParamIndexNext OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value which will
be used for mplsTrafficParamIndex when creating
entries in the mplsTrafficParamTable. The value 0
indicates that no unassigned entries are available.
To obtain the mplsTrafficParamIndex value for a new
entry, the manager issues a management protocol
retrieval operation to obtain the current value of
this object. After each retrieval operation, the
agent should modify the value to reflect the next
unassigned index. After a manager retrieves a value
the agent will determine through its local policy
when this index value will be made available for
reuse."
::= { mplsLsrObjects 13 }
mplsTrafficParamTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTrafficParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the Traffic Parameter objects
for in and out-segments."
::= { mplsLsrObjects 14 }
mplsTrafficParamEntry OBJECT-TYPE
SYNTAX MplsTrafficParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents the TrafficParam
objects for one or more in or out segments. A
single entry can be pointed to by multiple segments
indicating resource sharing."
INDEX { mplsTrafficParamIndex }
::= { mplsTrafficParamTable 1 }
MplsTrafficParamEntry ::= SEQUENCE {
mplsTrafficParamIndex Unsigned32,
mplsTrafficParamMaxRate MplsBitRate,
mplsTrafficParamMeanRate MplsBitRate,
mplsTrafficParamMaxBurstSize MplsBurstSize,
mplsTrafficParamRowStatus RowStatus,
mplsTrafficParamStorageType StorageType
}
mplsTrafficParamIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies this row of the table. Note
that zero represents an invalid index."
::= { mplsTrafficParamEntry 1 }
mplsTrafficParamMaxRate OBJECT-TYPE
SYNTAX MplsBitRate
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum rate in kilobits/second."
::= { mplsTrafficParamEntry 2 }
mplsTrafficParamMeanRate OBJECT-TYPE
SYNTAX MplsBitRate
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Mean rate in kilobits/second."
::= { mplsTrafficParamEntry 3 }
mplsTrafficParamMaxBurstSize OBJECT-TYPE
SYNTAX MplsBurstSize
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum burst size in bytes."
::= { mplsTrafficParamEntry 4 }
mplsTrafficParamRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For creating, modifying, and deleting this row."
::= { mplsTrafficParamEntry 5 }
mplsTrafficParamStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this object. If this variable
is set to readOnly(5), and the corresponding TFIB
entry is removed, then the agent must remove this
row shortly thereafter."
::= { mplsTrafficParamEntry 6 }
-- End of mplsTrafficParamTable
-- Notification Configuration
mplsXCTrapEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is set to true(1), then it enables
the emission of mplsXCUp and mplsXCDown
notifications; otherwise these notifications are not
emitted."
DEFVAL { false }
::= { mplsLsrObjects 15 }
-- Cross-connect.
mplsXCUp NOTIFICATION-TYPE
OBJECTS {
mplsXCOperStatus, -- start of range
mplsXCOperStatus -- end of range
}
STATUS current
DESCRIPTION
"This notification is generated when the
mplsXCOperStatus object for one or more contiguous
entries in mplsXCTable are about to enter the up(1)
state from some other. The included values of
mplsXCOperStatus MUST both be set equal to this
other state. The two instances of mplsXCOperStatus
in this notification indicate the range of indexes
that are affected. Note that all the indexes of the
two ends of the range can be derived from the
instance identifiers of these two objects. For
cases where a contiguous range of cross-connects
have transitioned into the up(1) state at roughly
the same time, the device SHOULD issue a single
notification for each range of contiguous indexes in
an effort to minimize the emission of a large number
of notifications. If a notification has to be
issued for just a single cross-connect entry, then
the instance identifier (and values) of the two
mplsXCOperStatus objects MUST be the identical."
::= { mplsLsrNotifyPrefix 1 }
mplsXCDown NOTIFICATION-TYPE
OBJECTS {
mplsXCOperStatus, -- start of range
mplsXCOperStatus -- end of range
}
STATUS current
DESCRIPTION
" This notification is generated when the
mplsXCOperStatus object for one or more contiguous
entries in mplsXCTable are about to enter the
down(2) state from some other. The included values
of mplsXCOperStatus MUST both be set equal to this
other state. The two instances of mplsXCOperStatus
in this notification indicate the range of indexes
that are affected. Note that all the indexes of the
two ends of the range can be derived from the
instance identifiers of these two objects. For
cases where a contiguous range of cross-connects
have transitioned into the down(2) state at roughly
the same time, the device SHOULD issue a single
notification for each range of contiguous indexes in
an effort to minimize the emission of a large number
of notifications. If a notification has to be
issued for just a single cross-connect entry, then
the instance identifier (and values) of the two
mplsXCOperStatus objects MUST be the identical."
::= { mplsLsrNotifyPrefix 2 }
-- End of notifications.
-- Module compliance.
mplsLsrGroups
OBJECT IDENTIFIER ::= { mplsLsrConformance 1 }
mplsLsrCompliances
OBJECT IDENTIFIER ::= { mplsLsrConformance 2 }
mplsLsrModuleCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents that support the
MPLS LSR MIB."
MODULE -- this module
-- The mandatory groups have to be implemented
-- by all LSRs. However, they may all be supported
-- as read-only objects in the case where manual
-- configuration is unsupported.
MANDATORY-GROUPS {
mplsInSegmentGroup,
mplsOutSegmentGroup,
mplsXCGroup,
mplsInterfaceGroup,
mplsPerfGroup,
mplsSegmentDiscontinuityGroup
}
GROUP mplsHCInSegmentPerfGroup
DESCRIPTION
"This group is mandatory for those in-segment
entries for which the object
mplsInSegmentOutOctets wraps around too
quickly."
GROUP mplsHCOutSegmentPerfGroup
DESCRIPTION
"This group is mandatory for those out-segment
entries for which the object
mplsOutSegmentOctets wraps around too quickly."
GROUP mplsTrafficParamGroup
DESCRIPTION
"This group is mandatory for those LSRs that
support QoS resource reservation."
-- Depending on whether the device implements
-- persistent cross-connects or not one of the
-- following two groups is mandatory.
GROUP mplsXCIsPersistentGroup
DESCRIPTION
"This group is mandatory for devices which
support persistent cross-connects. The
following constraints apply: mplsXCIsPersistent
must at least be read-only returning true(2)."
GROUP mplsXCIsNotPersistentGroup
DESCRIPTION
"This group is mandatory for devices which
support non-persistent cross-connects. The
following constraints apply: mplsXCIsPersistent
must at least be read-only returning false(1)."
-- mplsInSegmentTable
OBJECT mplsInSegmentXCIndex
DESCRIPTION
"Write access is not required."
OBJECT mplsInSegmentNPop
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required. This object
should be set to 1 if it is read-only."
OBJECT mplsInSegmentAddrFamily
DESCRIPTION
"Write access is not required. A <value of
other(0) should be supported because there may
be cases where the agent may not know about or
support any address types."
OBJECT mplsInSegmentStorageType
SYNTAX INTEGER { other(1) }
MIN-ACCESS read-only
DESCRIPTION
"Only other(1) needs to be supported."
-- mplsOutSegmentTable
OBJECT mplsOutSegmentIfIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsOutSegmentPushTopLabel
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsOutSegmentTopLabel
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsOutSegmentNextHopIpAddrType
MIN-ACCESS read-only
DESCRIPTION
"ipV6(3) need not be supported."
OBJECT mplsOutSegmentNextHopIpv4Addr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsOutSegmentNextHopIpv6Addr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsOutSegmentRowStatus
SYNTAX INTEGER {
active(1),
notInService(2),
createAndGo(4),
destroy(6)
}
MIN-ACCESS read-only
DESCRIPTION
"The notReady(3) and createAndWait(5) states need
not be supported."
OBJECT mplsOutSegmentStorageType
SYNTAX INTEGER { other(1) }
MIN-ACCESS read-only
DESCRIPTION
"Only other(1) needs to be supported."
-- mplsXCTable
OBJECT mplsXCLabelStackIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsXCIsPersistent
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsXCAdminStatus
SYNTAX INTEGER { up(1), down(2) }
MIN-ACCESS read-only
DESCRIPTION
"A value of testing(3) need not be supported."
OBJECT mplsXCOperStatus
SYNTAX INTEGER { up(1), down(2) }
DESCRIPTION
"Only up(1) and down(2) need to be supported."
OBJECT mplsXCRowStatus
SYNTAX INTEGER {
active(1),
notInService(2),
createAndGo(4),
destroy(6)
}
MIN-ACCESS read-only
DESCRIPTION
"The notReady(3) and createAndWait(5) states need
not be supported."
OBJECT mplsXCStorageType
SYNTAX INTEGER { other(1) }
MIN-ACCESS read-only
DESCRIPTION
"Only other(1) needs to be supported."
::= { mplsLsrCompliances 1 }
-- Units of conformance.
mplsInterfaceGroup OBJECT-GROUP
OBJECTS {
mplsInterfaceLabelMinIn,
mplsInterfaceLabelMaxIn,
mplsInterfaceLabelMinOut,
mplsInterfaceLabelMaxOut,
mplsInterfaceTotalBandwidth,
mplsInterfaceAvailableBandwidth,
mplsInterfaceLabelParticipationType
}
STATUS current
DESCRIPTION
"Collection of objects needed for MPLS interface
configuration and performance information."
::= { mplsLsrGroups 1 }
mplsInSegmentGroup OBJECT-GROUP
OBJECTS {
mplsInSegmentNPop,
mplsInSegmentAddrFamily,
mplsInSegmentXCIndex,
mplsInSegmentOctets,
mplsInSegmentDiscards,
mplsInSegmentOwner,
mplsInSegmentRowStatus,
mplsInSegmentStorageType,
mplsInSegmentTrafficParamPtr
}
STATUS current
DESCRIPTION
"Collection of objects needed to implement an in-
segment."
::= { mplsLsrGroups 2 }
mplsOutSegmentGroup OBJECT-GROUP
OBJECTS {
mplsOutSegmentIndexNext,
mplsOutSegmentIfIndex,
mplsOutSegmentPushTopLabel,
mplsOutSegmentTopLabel,
mplsOutSegmentNextHopIpAddrType,
mplsOutSegmentNextHopIpv4Addr,
mplsOutSegmentNextHopIpv6Addr,
mplsOutSegmentXCIndex,
mplsOutSegmentOwner,
mplsOutSegmentOctets,
mplsOutSegmentDiscards,
mplsOutSegmentErrors,
mplsOutSegmentRowStatus,
mplsOutSegmentStorageType,
mplsOutSegmentTrafficParamPtr
}
STATUS current
DESCRIPTION
"Collection of objects needed to implement an out-
segment."
::= { mplsLsrGroups 3 }
mplsXCGroup OBJECT-GROUP
OBJECTS {
mplsXCIndexNext,
mplsXCLabelStackIndex,
mplsXCOwner,
mplsXCAdminStatus,
mplsXCOperStatus,
mplsXCRowStatus,
mplsXCTrapEnable,
mplsXCStorageType
}
STATUS current
DESCRIPTION
"Collection of objects needed to implement a
cross-connect entry."
::= { mplsLsrGroups 4 }
mplsXCOptionalGroup OBJECT-GROUP
OBJECTS { mplsXCLspId }
STATUS current
DESCRIPTION
"Collection of optional objects for implementing
a cross-connect entry."
::= { mplsLsrGroups 5 }
mplsPerfGroup OBJECT-GROUP
OBJECTS {
mplsInSegmentOctets,
mplsInSegmentPackets,
mplsInSegmentErrors,
mplsInSegmentDiscards,
mplsOutSegmentOctets,
mplsOutSegmentPackets,
mplsOutSegmentDiscards,
mplsInterfaceInLabelsUsed,
mplsInterfaceFailedLabelLookup,
mplsInterfaceOutFragments,
mplsInterfaceOutLabelsUsed
}
STATUS current
DESCRIPTION
"Collection of objects providing performance
information
about an LSR."
::= { mplsLsrGroups 6 }
mplsHCInSegmentPerfGroup OBJECT-GROUP
OBJECTS { mplsInSegmentHCOctets }
STATUS current
DESCRIPTION
"Object(s) providing performance information
specific to out-segments for which the object
mplsInterfaceInOctets wraps around too quickly."
::= { mplsLsrGroups 7 }
mplsHCOutSegmentPerfGroup OBJECT-GROUP
OBJECTS { mplsOutSegmentHCOctets }
STATUS current
DESCRIPTION
"Object(s) providing performance information
specific to out-segments for which the object
mplsInterfaceOutOctets wraps around too
quickly."
::= { mplsLsrGroups 8 }
mplsTrafficParamGroup OBJECT-GROUP
OBJECTS {
mplsTrafficParamIndexNext,
mplsTrafficParamMaxRate,
mplsTrafficParamMeanRate,
mplsTrafficParamMaxBurstSize,
mplsTrafficParamRowStatus,
mplsTrafficParamStorageType
}
STATUS current
DESCRIPTION
"Object(s) required for supporting QoS resource
reservation."
::= { mplsLsrGroups 9 }
mplsXCIsPersistentGroup OBJECT-GROUP
OBJECTS { mplsXCIsPersistent }
STATUS current
DESCRIPTION
"Objects needed to support persistent cross-
connects."
::= { mplsLsrGroups 10 }
mplsXCIsNotPersistentGroup OBJECT-GROUP
OBJECTS { mplsXCIsPersistent }
STATUS current
DESCRIPTION
"Objects needed to support non-persistent cross-
connects."
::= { mplsLsrGroups 11 }
mplsLabelStackGroup OBJECT-GROUP
OBJECTS {
mplsLabelStackLabel,
mplsLabelStackRowStatus,
mplsLabelStackStorageType,
mplsMaxLabelStackDepth,
mplsLabelStackIndexNext
}
STATUS current
DESCRIPTION
"Objects needed to support label stacking."
::= { mplsLsrGroups 12 }
mplsSegmentDiscontinuityGroup OBJECT-GROUP
OBJECTS {
mplsInSegmentPerfDiscontinuityTime,
mplsOutSegmentPerfDiscontinuityTime
}
STATUS current
DESCRIPTION
" A collection of objects providing information
specific to segment discontinuities.."
::= { mplsLsrGroups 13 }
mplsLsrNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
mplsXCUp,
mplsXCDown
}
STATUS current
DESCRIPTION
"Set of notifications implemented in this module.
None is mandatory."
::= { mplsLsrGroups 14 }
END
HP-SN-MPLS-TE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Integer32, Unsigned32, Counter32, Counter64, TimeTicks
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
TruthValue, RowStatus, RowPointer, StorageType,
DisplayString, TimeStamp
FROM SNMPv2-TC
InterfaceIndexOrZero
FROM IF-MIB
mplsMIB, MplsBitRate, MplsBurstSize, MplsLSPID,
MplsTunnelIndex, MplsTunnelInstanceIndex,
MplsTunnelAffinity, MplsLsrIdentifier, MplsPathIndex,
MplsPathIndexOrZero
FROM HP-SN-MPLS-TC-MIB
InetAddressIPv4, InetAddressIPv6
FROM INET-ADDRESS-MIB
snMpls
FROM HP-SN-ROOT-MIB;
mplsTeMIB MODULE-IDENTITY
LAST-UPDATED
"200201041200Z" -- 4 January 2002 12:00:00 GMT
ORGANIZATION
"Multiprotocol Label Switching (MPLS) Working Group"
CONTACT-INFO
"
Cheenu Srinivasan
Postal: Parama Networks, Inc.
1030 Broad Street
Shrewsbury, NJ 07702
Tel: +1-732-544-9120 x731
Email: cheenu@paramanet.com
Arun Viswanathan
Postal: Force10 Networks, Inc.
1440 McCarthy Blvd
Milpitas, CA 95035
Tel: +1-408-571-3516
Email: arun@force10networks.com
Thomas D. Nadeau
Postal: Cisco Systems, Inc.
250 Apollo Drive
Chelmsford, MA 01824
Tel: +1-978-244-3051
Email: tnadeau@cisco.com
"
DESCRIPTION
"This MIB module contains managed object definitions
for MPLS Traffic Engineering (TE) as defined in:
1. Extensions to RSVP for LSP Tunnels, Awduche et
al, RFC 3209, December 2001
2. Constraint-Based LSP Setup using LDP, Jamoussi
(Editor), Internet Draft <draft-ietf-mpls-cr-ldp-
06.txt>, November 2001
3. Requirements for Traffic Engineering Over MPLS,
Awduche, D., Malcolm, J., Agogbua, J., O'Dell, M.,
and J. McManus, RFC 2702, September 1999"
-- Revision history.
REVISION
"200201041200Z" -- 4 January 2002 12:00:00 GMT
DESCRIPTION
"Initial draft version issues as part of RFC XXXX."
::= { mplsMIB 3 }
-- Top level components of this MIB.
-- tables, scalars
mplsTeScalars OBJECT IDENTIFIER ::= { mplsTeMIB 1 }
mplsTeObjects OBJECT IDENTIFIER ::= { mplsTeMIB 2 }
-- traps
mplsTeNotifications OBJECT IDENTIFIER ::= { mplsTeMIB 3 }
mplsTeNotifyPrefix OBJECT IDENTIFIER ::= { mplsTeNotifications 0 }
-- conformance
mplsTeConformance OBJECT IDENTIFIER ::= { mplsTeMIB 4 }
-- MPLS Tunnel scalars.
mplsTunnelConfigured OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunnels configured on this device. A
tunnel is considered configured if the
mplsTunnelRowStatus is active(1)."
::= { mplsTeScalars 1 }
mplsTunnelActive OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of tunnels active on this device. A
tunnel is considered active if the
mplsTunnelOperStatus is up(1)."
::= { mplsTeScalars 2 }
mplsTunnelTEDistProto OBJECT-TYPE
SYNTAX BITS {
other (0),
ospf (1),
isis (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The traffic engineering distribution protocol(s)
used by this LSR. Note that an LSR may support more
than one distribution protocol simultaneously."
::= { mplsTeScalars 3 }
mplsTunnelMaxHops OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of hops that can be specified for
a tunnel on this device."
::= { mplsTeScalars 4 }
-- End of MPLS Tunnel scalars.
-- MPLS tunnel table.
mplsTunnelIndexNext OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the next appropriate value to
be used for mplsTunnelIndex when creating entries
in mplsTunnelTable. If the number of unassigned
entries is exhausted, a retrival operation will
return a value of 0. This object may also return a
value of 0 when the LSR is unable to accept
conceptual row creation, for example, if the
mplsTunnelTable is implemented as read-only. To
obtain the value of mplsTunnelIndex for a new
entry, the manager must first issue a management
protocol retrieval operation to obtain the current
value of this object. The agent should modify the
value to reflect the next unassigned index after
each retrieval operation. After a manager retrieves
a value the agent will determine through its local
policy when this index value will be made available
for reuse."
::= { mplsTeObjects 1 }
mplsTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mplsTunnelTable allows new MPLS tunnels to be
created between an LSR and a remote endpoint, and
existing tunnels to be reconfigured or removed.
Note that only point-to-point tunnel segments are
supported, although multi-point-to-point and point-
to-multi-point connections are supported by an LSR
acting as a cross-connect. Each MPLS tunnel can
thus have one out-segment originating at this LSR
and/or one in-segment terminating at this LSR."
::= { mplsTeObjects 2 }
mplsTunnelEntry OBJECT-TYPE
SYNTAX MplsTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents an MPLS tunnel.
An entry can be created by a network administrator
or by an SNMP agent as instructed by an MPLS
signaling protocol. Whenever a new entry is created
with mplsTunnelIsIf set to true(1), then a
corresponding entry is created in ifTable as well
(see RFC 2863). The ifType of this entry is
mplsTunnel(150)."
REFERENCE
"1. RFC 2863 - The Interfaces Group MIB, McCloghrie,
K., and F. Kastenholtz, June 2000
2. RFC 1700 - Assigned Numbers, Reynolds, J. and J.
Postel, Oct. 1994"
INDEX {
mplsTunnelIndex,
mplsTunnelInstance,
mplsTunnelIngressLSRId,
mplsTunnelEgressLSRId
}
::= { mplsTunnelTable 1 }
MplsTunnelEntry ::= SEQUENCE {
mplsTunnelIndex MplsTunnelIndex,
mplsTunnelInstance MplsTunnelInstanceIndex,
mplsTunnelIngressLSRId MplsLsrIdentifier,
mplsTunnelEgressLSRId MplsLsrIdentifier,
mplsTunnelName DisplayString,
mplsTunnelDescr DisplayString,
mplsTunnelIsIf TruthValue,
mplsTunnelIfIndex InterfaceIndexOrZero,
mplsTunnelXCPointer RowPointer,
mplsTunnelSignallingProto INTEGER,
mplsTunnelSetupPrio Integer32,
mplsTunnelHoldingPrio Integer32,
mplsTunnelSessionAttributes BITS,
mplsTunnelOwner INTEGER,
mplsTunnelLocalProtectInUse TruthValue,
mplsTunnelResourcePointer RowPointer,
mplsTunnelInstancePriority Unsigned32,
mplsTunnelHopTableIndex MplsPathIndexOrZero,
mplsTunnelARHopTableIndex MplsPathIndexOrZero,
mplsTunnelCHopTableIndex MplsPathIndexOrZero,
mplsTunnelPrimaryInstance MplsTunnelInstanceIndex,
mplsTunnelPrimaryTimeUp TimeTicks,
mplsTunnelPathChanges Counter32,
mplsTunnelLastPathChange TimeTicks,
mplsTunnelCreationTime TimeStamp,
mplsTunnelStateTransitions Counter32,
mplsTunnelIncludeAnyAffinity MplsTunnelAffinity,
mplsTunnelIncludeAllAffinity MplsTunnelAffinity,
mplsTunnelExcludeAllAffinity MplsTunnelAffinity,
mplsTunnelPathInUse MplsPathIndexOrZero,
mplsTunnelRole INTEGER,
mplsTunnelTotalUpTime TimeTicks,
mplsTunnelInstanceUpTime TimeTicks,
mplsTunnelAdminStatus INTEGER,
mplsTunnelOperStatus INTEGER,
mplsTunnelRowStatus RowStatus,
mplsTunnelStorageType StorageType
}
mplsTunnelIndex OBJECT-TYPE
SYNTAX MplsTunnelIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies this row."
::= { mplsTunnelEntry 1 }
mplsTunnelInstance OBJECT-TYPE
SYNTAX MplsTunnelInstanceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies an instance of a tunnel. It is
useful to identify multiple instances of tunnels
for the purposes of backup and parallel tunnels."
::= { mplsTunnelEntry 2 }
mplsTunnelIngressLSRId OBJECT-TYPE
SYNTAX MplsLsrIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The purpose of this object is to uniquely identity a
tunnel within a network. When the MPLS signalling
protoocol is rsvp(2) this value SHOULD mimic the
Extended Tunnel Id field in the SESSION object.
When the MPLS signalling protoocol is crldp(3) this
value SHOULD mimic the Ingress LSR Router ID field
in the LSPID TLV object."
REFERENCE
"1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
Awduche et al, RFC 3209, December 2001
2. Constraint-Based LSP Setup using LDP, Jamoussi
(Editor), Internet Draft <draft-ietf-mpls-cr-ldp-
06.txt>, November 2001"
::= { mplsTunnelEntry 3 }
mplsTunnelEgressLSRId OBJECT-TYPE
SYNTAX MplsLsrIdentifier
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the egress LSR ID."
::= { mplsTunnelEntry 4 }
mplsTunnelName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The canonical name assigned to the tunnel. This name
can be used to refer to the tunnel on the LSR's
console port. If mplsTunnelIsIf is set to true
then the ifName of the interface corresponding to
this tunnel should have a value equal to
mplsTunnelName. Also see the description of ifName
in RFC 2863."
REFERENCE
"RFC 2863 - The Interfaces Group MIB, McCloghrie, K.,
and F. Kastenholtz, June 2000"
::= { mplsTunnelEntry 5 }
mplsTunnelDescr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A textual string containing information about the
tunnel. If there is no description this object
contains a zero length string."
::= { mplsTunnelEntry 6 }
mplsTunnelIsIf OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes whether or not this tunnel corresponds to an
interface represented in the interfaces group
table. Note that if this variable is set to true
then the ifName of the interface corresponding to
this tunnel should have a value equal to
mplsTunnelName. Also see the description of ifName
in RFC 2863."
REFERENCE
"RFC 2863 - The Interfaces Group MIB, McCloghrie, K.,
and F. Kastenholtz, June 2000"
DEFVAL { false }
::= { mplsTunnelEntry 7 }
mplsTunnelIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If mplsTunnelIsIf is set to true, then this value
contains the LSR-assigned ifIndex which corresponds
to an entry in the interfaces table. Otherwise
this variable should contain the value of zero
indicating that a valid ifIndex was not assigned to
this tunnel interface."
REFERENCE
"RFC 2863 - The Interfaces Group MIB, McCloghrie, K.,
and F. Kastenholtz, June 2000"
::= { mplsTunnelEntry 8 }
mplsTunnelXCPointer OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable points to a row in the mplsXCTable.
This table identifies the segments that compose
this tunnel, their characteristics, and
relationships to each other. A value of zeroDotZero
indicates that no LSP has been associated with this
tunnel yet."
REFERENCE
"Srinivasan, C., Viswanathan, A., and T. Nadeau, MPLS
Label Switch Router Management Information Base,
Internet Draft <draft-ietf-mpls-lsr-mib-08.txt>,
December 2001."
::= { mplsTunnelEntry 9 }
mplsTunnelSignallingProto OBJECT-TYPE
SYNTAX INTEGER {
none(1),
rsvp(2),
crldp(3),
other(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The signaling protocol, if any, which was used to
setup this tunnel."
DEFVAL { none }
::= { mplsTunnelEntry 10 }
mplsTunnelSetupPrio OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the setup priority of this tunnel."
REFERENCE
"1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
Awduche et al, RFC 3209, December 2001
2. Constraint-Based LSP Setup using LDP, Jamoussi
(Editor), Internet Draft <draft-ietf-mpls-cr-ldp-
06.txt>, November 2001"
::= { mplsTunnelEntry 11 }
mplsTunnelHoldingPrio OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the holding priority for this tunnel."
REFERENCE
"1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
Awduche et al, RFC3209, December 2001
2. Constraint-Based LSP Setup using LDP, Jamoussi
(Editor), Internet Draft <draft-ietf-mpls-cr-ldp-
06.txt>, November 2001"
::= { mplsTunnelEntry 12 }
mplsTunnelSessionAttributes OBJECT-TYPE
SYNTAX BITS {
fastReroute (0),
mergingPermitted (1),
isPersistent (2),
isPinned (3),
recordRoute(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This bitmask indicates optional session values for
this tunnel. The following describes these
bitfields:
fastRerouteThis flag indicates that the any tunnel
hop may choose to reroute this tunnel without
tearing it down. This flag permits transit routers
to use a local repair mechanism which may result in
violation of the explicit routing of this tunnel.
When a fault is detected on an adjacent downstream
link or node, a transit router can reroute traffic
for fast service restoration.
mergingPermitted This flag permits transit routers
to merge this session with other RSVP sessions for
the purpose of reducing resource overhead on
downstream transit routers, thereby providing
better network scalability.
isPersistent Indicates whether this tunnel should
be restored automatically after a failure occurs.
isPinned This flag indicates whether the loose-
routed hops of this tunnel are to be pinned.
recordRouteThis flag indicates whether or not the
signaling protocol should remember the tunnel path
after it has been signaled."
REFERENCE
"1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
Awduche et al, RFC 3209, December 2001."
::= { mplsTunnelEntry 13 }
mplsTunnelOwner OBJECT-TYPE
SYNTAX INTEGER {
admin(1), -- represents all management entities
rsvp(2),
crldp(3),
policyAgent(4),
other(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates which protocol created and is responsible
for managing this tunnel. Values rsvp(2) and
crldp(3) should not be used at the head-end of a
MPLS tunnel."
::= { mplsTunnelEntry 14 }
mplsTunnelLocalProtectInUse OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates that the local repair mechanism is in use
to maintain this tunnel (usually in the face of an
outage of the link it was previously routed over)."
::= { mplsTunnelEntry 15 }
mplsTunnelResourcePointer OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable represents a pointer to the traffic
parameter specification for this tunnel. This
value may point at an entry in the
mplsTunnelResourceEntry to indicate which
mplsTunnelResourceEntry is to be assigned to this
segment. This value may optionally point at an
externally defined traffic parameter specification
table. A value of zeroDotZero indicates best-
effort treatment. By having the same value of this
object, two or more segments can indicate resource
sharing."
::= { mplsTunnelEntry 16 }
mplsTunnelInstancePriority OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value indicates which priority, in descending
order, with 0 indicating the lowest priority,
within a group of tunnel instances. A group of
tunnel instances is defined as a set of tunnels
with the same mplsTunnelIndex in this table, but
with a different mplsTunnelInstance. Tunnel group
priorities are used to denote the priority at which
a particular tunnel instance will supercede
another. Instances of tunnels containing the same
mplsTunnelInstancePriority will be used for load
sharing."
DEFVAL { 0 }
::= { mplsTunnelEntry 17 }
mplsTunnelHopTableIndex OBJECT-TYPE
SYNTAX MplsPathIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Index into the mplsTunnelHopTable entry that
specifies the explicit route hops for this tunnel."
::= { mplsTunnelEntry 18 }
mplsTunnelARHopTableIndex OBJECT-TYPE
SYNTAX MplsPathIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index into the mplsTunnelARHopTable entry that
specifies the actual hops traversed by the tunnel."
::= { mplsTunnelEntry 19 }
mplsTunnelCHopTableIndex OBJECT-TYPE
SYNTAX MplsPathIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index into the mplsTunnelCHopTable entry that
specifies the computed hops traversed by the
tunnel."
::= { mplsTunnelEntry 20 }
mplsTunnelPrimaryInstance OBJECT-TYPE
SYNTAX MplsTunnelInstanceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the instance index of the primary instance
of this tunnel."
::= { mplsTunnelEntry 21 }
mplsTunnelPrimaryTimeUp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the total time the primary instance of
this tunnel has been active. The primary instance
of this tunnel is defined in
mplsTunnelPrimaryInstance."
::= { mplsTunnelEntry 22 }
mplsTunnelPathChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number of times the paths has changed
for this tunnel."
::= { mplsTunnelEntry 23 }
mplsTunnelLastPathChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the time since the last path change for
this tunnel."
::= { mplsTunnelEntry 24 }
mplsTunnelCreationTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the value of SysUpTime when the first
instance of this tunnel came into existence."
::= { mplsTunnelEntry 25 }
mplsTunnelStateTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the number of times the state of this
tunnel instance has changed."
::= { mplsTunnelEntry 26 }
mplsTunnelIncludeAnyAffinity OBJECT-TYPE
SYNTAX MplsTunnelAffinity
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A link satisfies the include-any constraint if and
only if the constraint is zero, or the link and the
constraint have a resource class in common."
REFERENCE
"1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
Awduche et al, RFC 3209, December 2001."
::= { mplsTunnelEntry 27 }
mplsTunnelIncludeAllAffinity OBJECT-TYPE
SYNTAX MplsTunnelAffinity
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A link satisfies the include-all constraint if and
only if the link contains all of the adminstrative
groups specified in the constraint."
REFERENCE
"1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
Awduche et al, RFC 3209, December 2001."
::= { mplsTunnelEntry 28 }
mplsTunnelExcludeAllAffinity OBJECT-TYPE
SYNTAX MplsTunnelAffinity
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A link satisfies the exclude-all constraint if and
only if the link contains none of the adminstrative
groups specifie in the constraint."
REFERENCE
"1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
Awduche et al, RFC 3209, December 2001."
::= { mplsTunnelEntry 29 }
mplsTunnelPathInUse OBJECT-TYPE
SYNTAX MplsPathIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value denotes the configured path that was
chosen for this tunnel. This value reflects the
secondary index into mplsTunnelHopTable. This path
may not exactly match the one in
mplsTunnelARHopTable due to the fact that some CSPF
modification may have taken place. See
mplsTunnelARHopTable for the actual path being
taken by the tunnel. A value of zero denotes that
no path is currently in use or available."
::= { mplsTunnelEntry 30 }
mplsTunnelRole OBJECT-TYPE
SYNTAX INTEGER { head(1), transit(2), tail(3) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value signifies the role that this tunnel
entry/instance represents. This value MUST be set
to head(1) at the originating point of the tunnel.
This value MUST be set to transit(2) at transit
points along the tunnel, if transit points are
supported. This value MUST be set to tail(3) at the
terminating point of the tunnel if tunnel tails are
supported."
::= { mplsTunnelEntry 31 }
mplsTunnelTotalUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value represents the aggregate up time for all
instances of this tunnel, if available. If this
value is unavailable, it MUST return a value of 0."
::= { mplsTunnelEntry 32 }
mplsTunnelInstanceUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value identifies the total time that this
tunnel instance's operStatus has been Up(1)."
::= { mplsTunnelEntry 33 }
mplsTunnelAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
-- ready to pass packets
up(1),
down(2),
-- in some test mode
testing(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the desired operational status of this
tunnel."
::= { mplsTunnelEntry 34 }
mplsTunnelOperStatus OBJECT-TYPE
SYNTAX INTEGER {
-- ready to pass packets
up(1),
down(2),
-- in some test mode
testing(3),
-- status cannot be determined
unknown(4),
dormant(5),
-- some component is missing
notPresent(6),
-- down due to the state of
-- lower layer interfaces
lowerLayerDown(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the actual operational status of this
tunnel, which is typically but not limited to, a
function of the state of individual segments of
this tunnel."
::= { mplsTunnelEntry 35 }
mplsTunnelRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table."
::= { mplsTunnelEntry 36 }
mplsTunnelStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the storage type for this
object."
::= { mplsTunnelEntry 37 }
-- End of mplsTunnelTable
mplsTunnelHopListIndexNext OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to be used
for mplsTunnelHopListIndex when creating entries in
the mplsTunnelHopTable. If the number of
unassigned entries is exhausted, a retrival
operation will return a value of 0. This object
may also return a value of 0 when the LSR is unable
to accept conceptual row creation, for example, if
the mplsTunnelHopTable is implemented as read-only.
To obtain the value of mplsTunnelHopListIndex for a
new entry in the mplsTunnelHopTable, the manager
issues a management protocol retrieval operation to
obtain the current value of mplsTunnelHopIndex.
After each retrieval operation, the agent should
modify the value to reflect the next unassigned
index. After a manager retrieves a value the agent
will determine through its local policy when this
index value will be made available for reuse."
::= { mplsTeObjects 3 }
mplsTunnelHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTunnelHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mplsTunnelHopTable is used to indicate the hops,
strict or loose, for an MPLS tunnel defined in
mplsTunnelTable, when it is established via
signaling, for the outgoing direction of the
tunnel. Each row in this table is indexed by
mplsTunnelHopListIndex. Each row also has a
secondary index mplsTunnelHopIndex corresponding to
the next hop that this row corresponds to. The
first row in the table is the first hop after the
origination point of the tunnel. In case we want
to specify a particular interface on the
originating LSR of an outgoing tunnel by which we
want packets to exit the LSR, we specify this as
the first hop for this tunnel in
mplsTunnelHopTable."
::= { mplsTeObjects 4 }
mplsTunnelHopEntry OBJECT-TYPE
SYNTAX MplsTunnelHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents a tunnel hop. An
entry is created by a network administrator for
signaled ERLSP set up by an MPLS signaling
protocol."
INDEX {
mplsTunnelHopListIndex,
mplsTunnelHopPathOptionIndex,
mplsTunnelHopIndex
}
::= { mplsTunnelHopTable 1 }
MplsTunnelHopEntry ::= SEQUENCE {
mplsTunnelHopListIndex MplsPathIndex,
mplsTunnelHopPathOptionIndex MplsPathIndex,
mplsTunnelHopIndex MplsPathIndex,
mplsTunnelHopAddrType INTEGER,
mplsTunnelHopIpv4Addr InetAddressIPv4,
mplsTunnelHopIpv4PrefixLen Unsigned32,
mplsTunnelHopIpv6Addr InetAddressIPv6,
mplsTunnelHopIpv6PrefixLen Unsigned32,
mplsTunnelHopAsNumber Unsigned32,
mplsTunnelHopLspId MplsLSPID,
mplsTunnelHopType INTEGER,
mplsTunnelHopIncludeExclude INTEGER,
mplsTunnelHopPathOptionName DisplayString,
mplsTunnelHopEntryPathComp INTEGER,
mplsTunnelHopRowStatus RowStatus,
mplsTunnelHopStorageType StorageType
}
mplsTunnelHopListIndex OBJECT-TYPE
SYNTAX MplsPathIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Primary index into this table identifying a
particular explicit route object."
::= { mplsTunnelHopEntry 1 }
mplsTunnelHopPathOptionIndex OBJECT-TYPE
SYNTAX MplsPathIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Secondary index into this table identifying a
particular group of hops representing a particular
configured path. This is otherwise known as a path
option."
::= { mplsTunnelHopEntry 2 }
mplsTunnelHopIndex OBJECT-TYPE
SYNTAX MplsPathIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Secondary index into this table identifying a
particular hop."
::= { mplsTunnelHopEntry 3 }
mplsTunnelHopAddrType OBJECT-TYPE
SYNTAX INTEGER {
ipV4(1),
ipV6(2),
asNumber(3),
lspid(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes the address type of this tunnel hop. Note
that lspId(4) is a valid option only for tunnels
signaled via CRLDP."
DEFVAL { ipV4 }
::= { mplsTunnelHopEntry 4 }
mplsTunnelHopIpv4Addr OBJECT-TYPE
SYNTAX InetAddressIPv4
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If mplsTunnelHopAddrType is set to ipV4(1), then
this value will contain the IPv4 address of this
hop. If mplsTunnelHopAddrType is set to lspid(4),
then this value will contain the Ingress LSR Router
ID of the Tunnel. This object is otherwise
insignificant and should contain a value of 0."
::= { mplsTunnelHopEntry 5 }
mplsTunnelHopIpv4PrefixLen OBJECT-TYPE
SYNTAX Unsigned32 (0..32)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If mplsTunnelHopAddrType is ipV4(1), then the prefix
length for this hop's IPv4 address is contained
herein. This object is otherwise insignificant and
should contain a value of 0."
::= { mplsTunnelHopEntry 6 }
mplsTunnelHopIpv6Addr OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the mplsTunnelHopAddrType is set to ipV6(2), then
this variable contains the IPv6 address of this
hop. This object is otherwise insignificant and
should contain a value of 0."
::= { mplsTunnelHopEntry 7 }
mplsTunnelHopIpv6PrefixLen OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If mplsTunnelHopAddrType is set to ipV6(2), this
value will contain the prefix length for this hop's
IPv6 address. This object is otherwise
insignificant and should contain a value of 0."
::= { mplsTunnelHopEntry 8 }
mplsTunnelHopAsNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If mplsTunnelHopAddrType is set to asNumber(3), then
this value will contain the AS number of this hop.
This object is otherwise insignificant and should
contain a value of 0 to indicate this fact."
::= { mplsTunnelHopEntry 9 }
mplsTunnelHopLspId OBJECT-TYPE
SYNTAX MplsLSPID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If mplsTunnelHopAddrType is set to lspid(4), then
this value will contain the LSPID of a tunnel of
this hop. The present tunnel being configured is
tunneled through this hop (using label stacking).
This object is otherwise insignificant and should
contain a value of 0 to indicate this fact."
::= { mplsTunnelHopEntry 10 }
mplsTunnelHopType OBJECT-TYPE
SYNTAX INTEGER {
strict(1),
loose(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes whether this tunnel hop is routed in a
strict or loose fashion."
::= { mplsTunnelHopEntry 11 }
mplsTunnelHopIncludeExclude OBJECT-TYPE
SYNTAX INTEGER {
include(1),
exclude(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If this value is set to include(1), then this
indicates that this hop must be included in the
tunnel's path. If this value is set to exclude(2),
then this hop must be avoided when calculating the
path for this tunnel. The default value of this
object is include(1), so that by default all
indicated hops are included in the CSPF path
computation."
DEFVAL { include }
::= { mplsTunnelHopEntry 12 }
mplsTunnelHopPathOptionName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The description of this series of hops as they
relate to the specified path option."
::= { mplsTunnelHopEntry 13 }
mplsTunnelHopEntryPathComp OBJECT-TYPE
SYNTAX INTEGER {
dynamic(1), -- CSPF computed
explicit(2) -- strict hop
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If this value is set to dynamic, then the user
should only specify the source and destination of
the path and expect that the CSPF will calculate
the remainder of the path. If this value is set to
explicit, the user should specify the entire path
for the tunnel to take. This path may contain
strict or loose hops. Each hop along a specific
path should have this object set to the same value"
::= { mplsTunnelHopEntry 14 }
mplsTunnelHopRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table."
::= { mplsTunnelHopEntry 15 }
mplsTunnelHopStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the storage type for this
object."
::= { mplsTunnelHopEntry 16 }
-- End of mplsTunnelHopTable
-- Begin of mplsTunnelResourceTable
mplsTunnelResourceIndexNext OBJECT-TYPE
SYNTAX Unsigned32 (0.. 2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the next appropriate value to
be used for mplsTunnelResourceIndex when creating
entries in the mplsTunnelResourceTable. If the
number of unassigned entries is exhausted, a
retrival operation will return a value of 0. This
object may also return a value of 0 when the LSR is
unable to accept conceptual row creation, for
example, if the mplsTunnelTable is implemented as
read-only. To obtain the mplsTunnelResourceIndex
value for a new entry, the manager must first issue
a management protocol retrieval operation to obtain
the current value of this object. The agent should
modify the value to reflect the next unassigned
index after each retrieval operation. After a
manager retrieves a value the agent will determine
through its local policy when this index value will
be made available for reuse."
::= { mplsTeObjects 5 }
mplsTunnelResourceTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTunnelResourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mplsTunnelResourceTable allows a manager to
specify which resources are desired for an MPLS
tunnel. This table also allows several tunnels to
point to a single entry in this table, implying
that these tunnels should share resources."
::= { mplsTeObjects 6 }
mplsTunnelResourceEntry OBJECT-TYPE
SYNTAX MplsTunnelResourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents a set of resources
for an MPLS tunnel. An entry can be created by a
network administrator or by an SNMP agent as
instructed by any MPLS signaling protocol."
INDEX { mplsTunnelResourceIndex }
::= { mplsTunnelResourceTable 1 }
MplsTunnelResourceEntry ::= SEQUENCE {
mplsTunnelResourceIndex Unsigned32,
mplsTunnelResourceMaxRate MplsBitRate,
mplsTunnelResourceMeanRate MplsBitRate,
mplsTunnelResourceMaxBurstSize MplsBurstSize,
mplsTunnelResourceMeanBurstSize MplsBurstSize,
mplsTunnelResourceExcessBurstSize MplsBurstSize,
mplsTunnelResourceFrequency INTEGER,
mplsTunnelResourceWeight Unsigned32,
mplsTunnelResourceRowStatus RowStatus,
mplsTunnelResourceStorageType StorageType
}
mplsTunnelResourceIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Uniquely identifies this row."
::= { mplsTunnelResourceEntry 1 }
mplsTunnelResourceMaxRate OBJECT-TYPE
SYNTAX MplsBitRate
UNITS "bits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum rate in bits/second. Note that setting
mplsTunnelResourceMaxRate,
mplsTunnelResourceMeanRate, and
mplsTunnelResourceMaxBurstSize to 0 indicates best-
effort treatment.
This object is copied to an instance of
mplsTrafficParamMaxRate in mplsTrafficParamTable
the OID of which is copied into the corresponding
mplsInSegmentTrafficParamPtr."
REFERENCE
"Srinivasan, C., Viswanathan, A., and T. Nadeau, MPLS
Label Switch Router Management Information Base,
Internet Draft <draft-ietf-mpls-lsr-mib-08.txt>,
December 2001."
::= { mplsTunnelResourceEntry 2 }
mplsTunnelResourceMeanRate OBJECT-TYPE
SYNTAX MplsBitRate
UNITS "bits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is copied into an instance of
mplsTrafficParamMeanRate in the
mplsTrafficParamTable. The OID of this table entry
is then copied into the corresponding
mplsInSegmentTrafficParamPtr.
When resource allocation is performed as requested
by this TSpec object, it is copied into an entry in
mplsTrafficParamTable [LSRMIB]:
mplsTunnelInMeanRate to mplsTrafficParamMeanRate.
The OID of this entry is copied to
mplsInSegmentTrafficParamPtr of the corresponding
in-segment entry."
REFERENCE
"Srinivasan, C., Viswanathan, A., and T. Nadeau, MPLS
Label Switch Router Management Information Base,
Internet Draft <draft-ietf-mpls-lsr-mib-08.txt>,
December 2001."
::= { mplsTunnelResourceEntry 3 }
mplsTunnelResourceMaxBurstSize OBJECT-TYPE
SYNTAX MplsBurstSize
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum burst size in bytes. This object is
copied to mplsInSegmentMaxBurstSize of the
corresponding in-segment.
When resource allocation is performed as requested
by this TSpec object, it is copied into an entry in
mplsTrafficParamTable [LSRMIB]:
mplsTunnelInMaxBurstSize to
mplsTrafficParamMaxBurstSize. The OID of this entry
is copied to mplsInSegmentTrafficParamPtr of the
corresponding in-segment entry."
REFERENCE
"Srinivasan, C., Viswanathan, A., and T. Nadeau, MPLS
Label Switch Router Management Information Base,
Internet Draft <draft-ietf-mpls-lsr-mib-08.txt>,
December 2001."
::= { mplsTunnelResourceEntry 4 }
mplsTunnelResourceMeanBurstSize OBJECT-TYPE
SYNTAX MplsBurstSize
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mean burst size in bytes. The implementations
which do not implement this variable must return 0
for this value and must not allow a user to set
this value."
::= { mplsTunnelResourceEntry 5 }
mplsTunnelResourceExcessBurstSize OBJECT-TYPE
SYNTAX MplsBurstSize
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Excess burst size in bytes. The implementations
which do not implement this variable must return 0
for this value and must not allow a user to set
this value."
REFERENCE
"CR-LDP Specification, Section 4.3."
::= { mplsTunnelResourceEntry 6 }
mplsTunnelResourceFrequency OBJECT-TYPE
SYNTAX INTEGER {
unspecified(1),
frequent(2),
veryFrequent(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The granularity of the availability of committed
rate. The implementations which do not implement
this variable must return unspecified(1) for this
value and must not allow a user to set this value."
REFERENCE
"CR-LDP Specification, Section 4.3."
::= { mplsTunnelResourceEntry 7 }
mplsTunnelResourceWeight OBJECT-TYPE
SYNTAX Unsigned32(0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The relative weight for using excess bandwidth above
its committed rate. The value of 0 means that
weight is not applicable for the CR-LSP."
REFERENCE
"CR-LDP Specification, Section 4.3."
::= { mplsTunnelResourceEntry 8 }
mplsTunnelResourceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table."
::= { mplsTunnelResourceEntry 9 }
mplsTunnelResourceStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the storage type for this
object."
::= { mplsTunnelResourceEntry 10 }
-- End mplsTunnelResourceTable
-- Tunnel Actual Route Hop table.
mplsTunnelARHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTunnelARHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mplsTunnelARHopTable is used to indicate the
hops, strict or loose, for an MPLS tunnel defined
in mplsTunnelTable, as reported by the MPLS
signaling protocol, for the outgoing direction of
the tunnel. Each row in this table is indexed by
mplsTunnelARHopListIndex. Each row also has a
secondary index mplsTunnelARHopIndex, corresponding
to the next hop that this row corresponds to. The
first row in the table is the first hop after the
origination point of the tunnel. In case we want
to specify a particular interface on the
originating LSR of an outgoing tunnel by which we
want packets to exit the LSR, we specify this as
the first hop for this tunnel in
mplsTunnelARHopTable.
Please note that since the information necessary to
build entries within this table are not provided by
some MPLS signaling protocols, implementation of
this table is optional. Furthermore, since the
information in this table is actually provided by
the MPLS signaling protocol after the path has been
set-up, the entries in this table are provided only
for observation, and hence, all variables in this
table are accessible exclusively as read-only."
::= { mplsTeObjects 7 }
mplsTunnelARHopEntry OBJECT-TYPE
SYNTAX MplsTunnelARHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents a tunnel hop. An
entry is created by a network administrator for
signaled ERLSP set up by an MPLS signaling
protocol."
INDEX { mplsTunnelARHopListIndex, mplsTunnelARHopIndex }
::= { mplsTunnelARHopTable 1 }
MplsTunnelARHopEntry ::= SEQUENCE {
mplsTunnelARHopListIndex MplsPathIndex,
mplsTunnelARHopIndex MplsPathIndex,
mplsTunnelARHopAddrType INTEGER,
mplsTunnelARHopIpv4Addr InetAddressIPv4,
mplsTunnelARHopIpv4PrefixLen Unsigned32,
mplsTunnelARHopIpv6Addr InetAddressIPv6,
mplsTunnelARHopIpv6PrefixLen Unsigned32,
mplsTunnelARHopAsNumber Unsigned32,
mplsTunnelARHopLspId MplsLSPID
}
mplsTunnelARHopListIndex OBJECT-TYPE
SYNTAX MplsPathIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Primary index into this table identifying a
particular recorded hop list."
::= { mplsTunnelARHopEntry 1 }
mplsTunnelARHopIndex OBJECT-TYPE
SYNTAX MplsPathIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Secondary index into this table identifying the
particular hop."
::= { mplsTunnelARHopEntry 2 }
mplsTunnelARHopAddrType OBJECT-TYPE
SYNTAX INTEGER {
ipV4(1),
ipV6(2),
asNumber(3),
lspId(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denotes the address type of this tunnel hop."
DEFVAL { ipV4 }
::= { mplsTunnelARHopEntry 3 }
mplsTunnelARHopIpv4Addr OBJECT-TYPE
SYNTAX InetAddressIPv4
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If mplsTunnelARHopAddrType is set to ipV4(1), then
this value will contain the IPv4 address of this
hop. This object is otherwise insignificant and
should contain a value of 0."
::= { mplsTunnelARHopEntry 4 }
mplsTunnelARHopIpv4PrefixLen OBJECT-TYPE
SYNTAX Unsigned32 (0..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If mplsTunnelARHopAddrType is ipV4(1), then the
prefix length for this hop's IPv4 address is
contained herein. This object is otherwise
insignificant and should contain a value of 0."
::= { mplsTunnelARHopEntry 5 }
mplsTunnelARHopIpv6Addr OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the mplsTunnelARHopAddrType is set to ipV6(2),
then this variable contains the IPv6 address of
this hop. This object is otherwise insignificant
and should contain a value of 0."
::= { mplsTunnelARHopEntry 6 }
mplsTunnelARHopIpv6PrefixLen OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If mplsTunnelARHopAddrType is set to ipV6(2), this
value will contain the prefix length for this hop's
IPv6 address. This object is otherwise
insignificant and should contain a value of 0."
::= { mplsTunnelARHopEntry 7 }
mplsTunnelARHopAsNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If mplsTunnelARHopAddrType is set to asNumber(3),
then this value will contain the AS number of this
hop. This object is otherwise insignificant and
should contain a value of 0 to indicate this fact."
::= { mplsTunnelARHopEntry 8 }
mplsTunnelARHopLspId OBJECT-TYPE
SYNTAX MplsLSPID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If mplsTunnelARHopAddrType is set to lspid(4), then
this value will contain the LSP ID of this hop.
This object is otherwise insignificant and should
contain a value of 0 to indicate this fact."
::= { mplsTunnelARHopEntry 9 }
-- End of mplsTunnelARHopTable
-- Tunnel Computed Hop table.
mplsTunnelCHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTunnelCHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mplsTunnelCHopTable is used to indicate the
hops, strict or loose, for an MPLS tunnel defined
in mplsTunnelTable, as computed by a constraint-
based routing protocol, based on the
mplsTunnelHopTable for the outgoing direction of
the tunnel. Each row in this table is indexed by
mplsTunnelCHopListIndex. Each row also has a
secondary index mplsTunnelCHopIndex, corresponding
to the next hop that this row corresponds to. The
first row in the table is the first hop after the
origination point of the tunnel. In case we want
to specify a particular interface on the
originating LSR of an outgoing tunnel by which we
want packets to exit the LSR, we specify this as
the first hop for this tunnel in
mplsTunnelCHopTable.
Please note that since the information necessary to
build entries within this table may not be
supported by some LSRs, implementation of this
table is optional. Furthermore, since the
information in this table is actually provided by
routing protocol after the path has been computed,
the entries in this table are provided only for
observation, and hence, all variables in this table
are accessible exclusively as read-only."
::= { mplsTeObjects 8 }
mplsTunnelCHopEntry OBJECT-TYPE
SYNTAX MplsTunnelCHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents a tunnel hop. An
entry in this table is created by a constraint-
based routing protocol based on the hops specified
in the corresponding mplsTunnelHopTable."
INDEX { mplsTunnelCHopListIndex, mplsTunnelCHopIndex }
::= { mplsTunnelCHopTable 1 }
MplsTunnelCHopEntry ::= SEQUENCE {
mplsTunnelCHopListIndex MplsPathIndex,
mplsTunnelCHopIndex MplsPathIndex,
mplsTunnelCHopAddrType INTEGER,
mplsTunnelCHopIpv4Addr InetAddressIPv4,
mplsTunnelCHopIpv4PrefixLen Unsigned32,
mplsTunnelCHopIpv6Addr InetAddressIPv6,
mplsTunnelCHopIpv6PrefixLen Unsigned32,
mplsTunnelCHopAsNumber Unsigned32,
mplsTunnelCHopLspId MplsLSPID,
mplsTunnelCHopType INTEGER
}
mplsTunnelCHopListIndex OBJECT-TYPE
SYNTAX MplsPathIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Primary index into this table identifying a
particular computed hop list."
::= { mplsTunnelCHopEntry 1 }
mplsTunnelCHopIndex OBJECT-TYPE
SYNTAX MplsPathIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Secondary index into this table identifying the
particular hop."
::= { mplsTunnelCHopEntry 2 }
mplsTunnelCHopAddrType OBJECT-TYPE
SYNTAX INTEGER {
ipV4(1),
ipV6(2),
asNumber(3),
lspId(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denotes the address type of this tunnel hop. Note
that lspId(4) is a valid option only for tunnels
signaled via CRLDP."
DEFVAL { ipV4 }
::= { mplsTunnelCHopEntry 3 }
mplsTunnelCHopIpv4Addr OBJECT-TYPE
SYNTAX InetAddressIPv4
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If mplsTunnelCHopAddrType is set to ipV4(1), then
this value will contain the IPv4 address of this
hop. This object is otherwise insignificant and
should contain a value of 0."
::= { mplsTunnelCHopEntry 4 }
mplsTunnelCHopIpv4PrefixLen OBJECT-TYPE
SYNTAX Unsigned32 (0..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If mplsTunnelCHopAddrType is ipV4(1), then the
prefix length for this hop's IPv4 address is
contained herein. This object is otherwise
insignificant and should contain a value of 0."
::= { mplsTunnelCHopEntry 5 }
mplsTunnelCHopIpv6Addr OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the mplsTunnelCHopAddrType is set to ipV6(2),
then this variable contains the IPv6 address of
this hop. This object is otherwise insignificant
and should contain a value of 0."
::= { mplsTunnelCHopEntry 6 }
mplsTunnelCHopIpv6PrefixLen OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If mplsTunnelCHopAddrType is set to ipV6(2), this
value will contain the prefix length for this hop's
IPv6 address. This object is otherwise
insignificant and should contain a value of 0."
::= { mplsTunnelCHopEntry 7 }
mplsTunnelCHopAsNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If mplsTunnelCHopAddrType is set to asNumber(3),
then this value will contain the AS number of this
hop. This object is otherwise insignificant and
should contain a value of 0 to indicate this fact."
::= { mplsTunnelCHopEntry 8 }
mplsTunnelCHopLspId OBJECT-TYPE
SYNTAX MplsLSPID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If mplsTunnelCHopAddrType is set to lspid(4), then
this value will contain the LSP ID of this hop.
This object is otherwise insignificant and should
contain a value of 0 to indicate this fact."
::= { mplsTunnelCHopEntry 9 }
mplsTunnelCHopType OBJECT-TYPE
SYNTAX INTEGER {
strict(1),
loose(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denotes whether this is tunnel hop is routed in a
strict or loose fashion."
::= { mplsTunnelCHopEntry 10 }
-- End of mplsTunnelCHopTable
-- MPLS Tunnel Performance Table.
mplsTunnelPerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTunnelPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides per-tunnel MPLS performance
information."
::= { mplsTeObjects 9 }
mplsTunnelPerfEntry OBJECT-TYPE
SYNTAX MplsTunnelPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by the LSR for
every tunnel. Its is an extension to
mplsTunnelEntry."
AUGMENTS { mplsTunnelEntry }
::= { mplsTunnelPerfTable 1 }
MplsTunnelPerfEntry ::= SEQUENCE {
mplsTunnelPerfPackets Counter32,
mplsTunnelPerfHCPackets Counter64,
mplsTunnelPerfErrors Counter32,
mplsTunnelPerfBytes Counter32,
mplsTunnelPerfHCBytes Counter64
}
mplsTunnelPerfPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets forwarded by the tunnel."
::= { mplsTunnelPerfEntry 1 }
mplsTunnelPerfHCPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High capacity counter for number of packets
forwarded by the tunnel."
::= { mplsTunnelPerfEntry 2 }
mplsTunnelPerfErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of errored packets."
::= { mplsTunnelPerfEntry 3 }
mplsTunnelPerfBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bytes forwarded by the tunnel."
::= { mplsTunnelPerfEntry 4 }
mplsTunnelPerfHCBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High capacity counter for number of bytes forwarded
by the tunnel."
::= { mplsTunnelPerfEntry 5 }
-- End of mplsTunnelPerfTable
-- CR-LDP Tunnel Resource Table
mplsTunnelCRLDPResTable OBJECT-TYPE
SYNTAX SEQUENCE OF MplsTunnelCRLDPResEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mplsTunnelCRLDPResTable allows a manager to
specify which CR-LDP-specific resources are desired
for an MPLS tunnel if that tunnel is signaled using
CR-LDP. Note that these attributes are in addition
to those specified in mplsTunnelResourceTable. This
table also allows several tunnels to point to a
single entry in this table, implying that these
tunnels should share resources."
::= { mplsTeObjects 10 }
mplsTunnelCRLDPResEntry OBJECT-TYPE
SYNTAX MplsTunnelCRLDPResEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table represents a set of resources
for an MPLS tunnel established using CRLDP
(mplsTunnelSignallingProto equal to crldp (3)). An
entry can be created by a network administrator or
by an SNMP agent as instructed by any MPLS
signaling protocol."
INDEX { mplsTunnelResourceIndex }
::= { mplsTunnelCRLDPResTable 1 }
MplsTunnelCRLDPResEntry ::= SEQUENCE {
mplsTunnelCRLDPResMeanBurstSize MplsBurstSize,
mplsTunnelCRLDPResExcessBurstSize MplsBurstSize,
mplsTunnelCRLDPResFrequency INTEGER,
mplsTunnelCRLDPResWeight Unsigned32,
mplsTunnelCRLDPResFlags Unsigned32,
mplsTunnelCRLDPResRowStatus RowStatus,
mplsTunnelCRLDPResStorageType StorageType
}
mplsTunnelCRLDPResMeanBurstSize OBJECT-TYPE
SYNTAX MplsBurstSize
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mean burst size in bytes."
::= { mplsTunnelCRLDPResEntry 2 }
mplsTunnelCRLDPResExcessBurstSize OBJECT-TYPE
SYNTAX MplsBurstSize
UNITS "bytes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Excess burst size in bytes."
REFERENCE
"CR-LDP Specification, Section 4.3."
::= { mplsTunnelCRLDPResEntry 3 }
mplsTunnelCRLDPResFrequency OBJECT-TYPE
SYNTAX INTEGER {
unspecified(1),
frequent(2),
veryFrequent(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The granularity of the availability of committed
rate."
REFERENCE
"CR-LDP Specification, Section 4.3."
::= { mplsTunnelCRLDPResEntry 4 }
mplsTunnelCRLDPResWeight OBJECT-TYPE
SYNTAX Unsigned32(0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The relative weight for using excess bandwidth above
its committed rate. The value of 0 means that
weight is not applicable for the CR-LSP."
REFERENCE
"CR-LDP Specification, Section 4.3."
DEFVAL { 0 }
::= { mplsTunnelCRLDPResEntry 5 }
mplsTunnelCRLDPResFlags OBJECT-TYPE
SYNTAX Unsigned32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the 1 byte Flags conveyed as part of
the traffic parameters during the establishment of
the CRLSP. The bits in this object are to be
interpreted as follows.
+--+--+--+--+--+--+--+--+
| Res |F6|F5|F4|F3|F2|F1|
+--+--+--+--+--+--+--+--+
Res - These bits are reserved. Zero on transmission.
Ignored on receipt.
F1 - Corresponds to the PDR.
F2 - Corresponds to the PBS.
F3 - Corresponds to the CDR.
F4 - Corresponds to the CBS.
F5 - Corresponds to the EBS.
F6 - Corresponds to the Weight.
Each flag if is a Negotiable Flag corresponding to a
Traffic Parameter. The Negotiable Flag value zero
denotes Not Negotiable and value one denotes
Negotiable."
REFERENCE
"1. Section 4.3, Constraint-Based LSP Setup using
LDP, Jamoussi (Editor), Internet Draft <draft-ietf-
mpls-crldp-06.txt>, November 2001"
DEFVAL { 0 }
::= { mplsTunnelCRLDPResEntry 6 }
mplsTunnelCRLDPResRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table."
::= { mplsTunnelCRLDPResEntry 7 }
mplsTunnelCRLDPResStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the storage type for this
object."
::= { mplsTunnelCRLDPResEntry 8 }
-- Notifications.
mplsTunnelTrapEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is true, then it enables the
generation of mplsTunnelUp and mplsTunnelDown
traps, otherwise these traps are not emitted."
DEFVAL { false }
::= { mplsTeObjects 11 }
mplsTunnelUp NOTIFICATION-TYPE
OBJECTS {
mplsTunnelAdminStatus,
mplsTunnelOperStatus
}
STATUS current
DESCRIPTION
"This notification is generated when a
mplsTunnelOperStatus object for one of the
configured tunnels is about to leave the down state
and transition into some other state (but not into
the notPresent state). This other state is
indicated by the included value of
mplsTunnelOperStatus."
::= { mplsTeNotifyPrefix 1 }
mplsTunnelDown NOTIFICATION-TYPE
OBJECTS {
mplsTunnelAdminStatus,
mplsTunnelOperStatus
}
STATUS current
DESCRIPTION
"This notification is generated when a
mplsTunnelOperStatus object for one of the
configured tunnels is about to enter the down state
from some other state (but not from the notPresent
state). This other state is indicated by the
included value of mplsTunnelOperStatus."
::= { mplsTeNotifyPrefix 2 }
mplsTunnelRerouted NOTIFICATION-TYPE
OBJECTS {
mplsTunnelAdminStatus,
mplsTunnelOperStatus
}
STATUS current
DESCRIPTION
"This notification is generated when a tunnel is
rerouted. If the actual path is used, then this
tunnel's entry MAY contain the new path for this
tunnel some time after this trap is issued by the
agent."
::= { mplsTeNotifyPrefix 3 }
mplsTunnelReoptimized NOTIFICATION-TYPE
OBJECTS {
mplsTunnelAdminStatus,
mplsTunnelOperStatus
}
STATUS current
DESCRIPTION
"This notification is generated when a tunnel is
reoptimized. If the actual path is used, then this
tunnel's entry MAY contain the new path for this
tunnel some time after this trap is issued by the
agent."
::= { mplsTeNotifyPrefix 4 }
-- End of notifications.
-- Module compliance.
mplsTeGroups
OBJECT IDENTIFIER ::= { mplsTeConformance 1 }
mplsTeCompliances
OBJECT IDENTIFIER ::= { mplsTeConformance 2 }
mplsTeModuleCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents that support the
MPLS TE MIB."
MODULE -- this module
-- The mandatory group has to be implemented by all
-- LSRs that originate/terminate ESLSPs/tunnels.
-- In addition, depending on the type of tunnels
-- supported, other groups become mandatory as
-- explained below.
MANDATORY-GROUPS {
mplsTunnelGroup,
mplsTunnelScalarGroup
}
GROUP mplsTunnelManualGroup
DESCRIPTION
"This group is mandatory for devices which support
manual configuration of tunnels, in addition to
mplsTunnelGroup. The following constraints apply:
mplsTunnelSignallingProto should be at least read-
only with a value of none(1)."
GROUP mplsTunnelSignaledGroup
DESCRIPTION
"This group is mandatory for devices which support
signaled tunnel set up, in addition to
mplsTunnelGroup. The following constraints apply:
mplsTunnelSignallingProto should be at least read-
only returning a value of ldp(2), or rsvp(3)."
GROUP mplsTunnelIsNotIntfcGroup
DESCRIPTION
"This group is mandatory for devices which support
tunnels that are not interfaces, in addition to
mplsTunnelGroup. The following constraints apply:
mplsTunnelIsIf must at least be read-only
returning false(1)."
GROUP mplsTunnelIsIntfcGroup
DESCRIPTION
"This group is mandatory for devices which support
tunnels that are interfaces, in addition to
mplsTunnelGroup. The following constraints apply:
mplsTunnelIsIf must at least be read-only
returning true(2)."
GROUP mplsTunnelOptionalGroup
DESCRIPTION
"Objects in this group are optional."
-- mplsTunnelTable
OBJECT mplsTunnelName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelDescr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelIsIf
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelIfIndex
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelXCPointer
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelSignallingProto
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelSetupPrio
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHoldingPrio
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelSessionAttributes
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelOwner
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelLocalProtectInUse
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelResourcePointer
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelInstancePriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopTableIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelPrimaryInstance
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelPrimaryTimeUp
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelPathChanges
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelLastPathChange
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelCreationTime
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelStateTransitions
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelARHopTableIndex
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelCHopTableIndex
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelAdminStatus
SYNTAX INTEGER { up (1), down (2) }
MIN-ACCESS read-only
DESCRIPTION
"Only up and down states must be supported. Write
access is not required."
OBJECT mplsTunnelOperStatus
SYNTAX INTEGER { up (1), down (2) }
DESCRIPTION
"Only up and down states must be supported. Write
access is not required."
OBJECT mplsTunnelRowStatus
SYNTAX INTEGER {
active(1),
notInService(2),
createAndGo(4),
destroy(6)
}
MIN-ACCESS read-only
DESCRIPTION
"The notReady(3) and createAndWait(5) states need
not be supported. Write access is not required."
OBJECT mplsTunnelStorageType
SYNTAX INTEGER { other(1) }
MIN-ACCESS read-only
DESCRIPTION
"Only other (1) needs to be supported."
OBJECT mplsTunnelPathInUse
MIN-ACCESS read-only
DESCRIPTION
"Read-only support is required."
OBJECT mplsTunnelRole
SYNTAX INTEGER { head(1) }
MIN-ACCESS read-only
DESCRIPTION
"Only support for head is required."
OBJECT mplsTunnelTotalUpTime
MIN-ACCESS read-only
DESCRIPTION
"Read-only support is required."
OBJECT mplsTunnelInstanceUpTime
MIN-ACCESS read-only
DESCRIPTION
"Read-only support is required."
-- mplsTunnelHopTable
OBJECT mplsTunnelHopAddrType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopIpv4Addr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopIpv4PrefixLen
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopIpv6Addr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopIpv6PrefixLen
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopAsNumber
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopLspId
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopType
SYNTAX INTEGER { strict(1) }
MIN-ACCESS read-only
DESCRIPTION
"loose(2) need not be supported. Write access is
not required."
OBJECT mplsTunnelHopIncludeExclude
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopPathOptionName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopEntryPathComp
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopRowStatus
SYNTAX INTEGER {
active(1),
notInService(2),
createAndGo(4),
destroy(6)
}
MIN-ACCESS read-only
DESCRIPTION
"The notReady(3) and createAndWait(5) states need
not be supported. Write access is not required."
OBJECT mplsTunnelHopStorageType
SYNTAX INTEGER { other(1) }
MIN-ACCESS read-only
DESCRIPTION
"Only other (1) needs to be supported."
-- mplsTunnelResourceTable
OBJECT mplsTunnelResourceMaxRate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelResourceMeanRate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelResourceMaxBurstSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelResourceMeanBurstSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelResourceExcessBurstSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelResourceFrequency
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelResourceWeight
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelResourceRowStatus
SYNTAX INTEGER {
active(1),
notInService(2),
createAndGo(4),
destroy(6)
}
MIN-ACCESS read-only
DESCRIPTION
"The notReady(3) and createAndWait(5) states need
not be supported. Write access is not required."
OBJECT mplsTunnelResourceStorageType
SYNTAX INTEGER { other(1) }
MIN-ACCESS read-only
DESCRIPTION
"Only other (1) needs to be supported."
-- mplsTunnelPerfTable
OBJECT mplsTunnelPerfPackets
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelPerfHCPackets
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelPerfErrors
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelPerfBytes
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelPerfHCBytes
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { mplsTeCompliances 1 }
-- Units of conformance.
mplsTunnelGroup OBJECT-GROUP
OBJECTS {
mplsTunnelIndexNext,
mplsTunnelName,
mplsTunnelDescr,
mplsTunnelOwner,
mplsTunnelXCPointer,
mplsTunnelIfIndex,
mplsTunnelHopTableIndex,
mplsTunnelARHopTableIndex,
mplsTunnelCHopTableIndex,
mplsTunnelAdminStatus,
mplsTunnelOperStatus,
mplsTunnelRowStatus,
mplsTunnelTrapEnable,
mplsTunnelStorageType,
mplsTunnelConfigured,
mplsTunnelActive,
mplsTunnelPrimaryInstance,
mplsTunnelPrimaryTimeUp,
mplsTunnelPathChanges,
mplsTunnelLastPathChange,
mplsTunnelCreationTime,
mplsTunnelStateTransitions,
mplsTunnelIncludeAnyAffinity,
mplsTunnelIncludeAllAffinity,
mplsTunnelExcludeAllAffinity,
mplsTunnelPerfPackets,
mplsTunnelPerfHCPackets,
mplsTunnelPerfErrors,
mplsTunnelPerfBytes,
mplsTunnelPerfHCBytes,
mplsTunnelResourcePointer,
mplsTunnelInstancePriority,
mplsTunnelPathInUse,
mplsTunnelRole,
mplsTunnelTotalUpTime,
mplsTunnelInstanceUpTime
}
STATUS current
DESCRIPTION
"Necessary, but not sufficient, set of objects to
implement tunnels. In addition, depending on the
type of the tunnels supported (for example,
manually configured or signaled, persistent or non-
persistent, etc.), the following other groups
defined below are mandatory: mplsTunnelManualGroup
and/or mplsTunnelSignaledGroup,
mplsTunnelIsNotIntfcGroup and/or
mplsTunnelIsIntfcGroup."
::= { mplsTeGroups 1 }
mplsTunnelManualGroup OBJECT-GROUP
OBJECTS { mplsTunnelSignallingProto }
STATUS current
DESCRIPTION
"Object(s) needed to implement manually configured
tunnels."
::= { mplsTeGroups 2 }
mplsTunnelSignaledGroup OBJECT-GROUP
OBJECTS {
mplsTunnelSetupPrio,
mplsTunnelHoldingPrio,
mplsTunnelSignallingProto,
mplsTunnelLocalProtectInUse,
mplsTunnelSessionAttributes,
mplsTunnelHopListIndexNext,
mplsTunnelHopAddrType,
mplsTunnelHopIpv4Addr,
mplsTunnelHopIpv4PrefixLen,
mplsTunnelHopIpv6Addr,
mplsTunnelHopIpv6PrefixLen,
mplsTunnelHopAsNumber,
mplsTunnelHopLspId,
mplsTunnelHopType,
mplsTunnelHopIncludeExclude,
mplsTunnelHopPathOptionName,
mplsTunnelHopEntryPathComp,
mplsTunnelHopRowStatus,
mplsTunnelHopStorageType
}
STATUS current
DESCRIPTION
"Object needed to implement signaled tunnels."
::= { mplsTeGroups 3 }
mplsTunnelScalarGroup OBJECT-GROUP
OBJECTS {
mplsTunnelConfigured,
mplsTunnelActive,
mplsTunnelTEDistProto,
mplsTunnelMaxHops
}
STATUS current
DESCRIPTION
"Scalar object needed to implement MPLS tunnels."
::= { mplsTeGroups 4 }
mplsTunnelIsIntfcGroup OBJECT-GROUP
OBJECTS { mplsTunnelIsIf }
STATUS current
DESCRIPTION
"Objects needed to implement tunnels that are
interfaces."
::= { mplsTeGroups 5 }
mplsTunnelIsNotIntfcGroup OBJECT-GROUP
OBJECTS { mplsTunnelIsIf }
STATUS current
DESCRIPTION
"Objects needed to implement tunnels that are not
interfaces."
::= { mplsTeGroups 6 }
mplsTunnelOptionalGroup OBJECT-GROUP
OBJECTS {
mplsTunnelResourceIndexNext,
mplsTunnelResourceMaxRate,
mplsTunnelResourceMeanRate,
mplsTunnelResourceMaxBurstSize,
mplsTunnelResourceMeanBurstSize,
mplsTunnelResourceExcessBurstSize,
mplsTunnelResourceFrequency,
mplsTunnelResourceWeight,
mplsTunnelResourceRowStatus,
mplsTunnelResourceStorageType,
mplsTunnelARHopAddrType,
mplsTunnelARHopIpv4Addr,
mplsTunnelARHopIpv4PrefixLen,
mplsTunnelARHopIpv6Addr,
mplsTunnelARHopIpv6PrefixLen,
mplsTunnelARHopAsNumber,
mplsTunnelARHopLspId,
mplsTunnelCHopAddrType,
mplsTunnelCHopIpv4Addr,
mplsTunnelCHopIpv4PrefixLen,
mplsTunnelCHopIpv6Addr,
mplsTunnelCHopIpv6PrefixLen,
mplsTunnelCHopAsNumber,
mplsTunnelCHopLspId,
mplsTunnelCHopType
}
STATUS current
DESCRIPTION
"The objects in this group are optional."
::= { mplsTeGroups 7 }
mplsTunnelCRLDPResOptionalGroup OBJECT-GROUP
OBJECTS {
mplsTunnelCRLDPResMeanBurstSize,
mplsTunnelCRLDPResExcessBurstSize,
mplsTunnelCRLDPResFrequency,
mplsTunnelCRLDPResWeight,
mplsTunnelCRLDPResFlags,
mplsTunnelCRLDPResRowStatus,
mplsTunnelCRLDPResStorageType
}
STATUS current
DESCRIPTION
"Set of objects implemented for resources applicable
for tunnels signaled using CR-LDP."
::= { mplsTeGroups 8 }
mplsTeNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
mplsTunnelUp,
mplsTunnelDown,
mplsTunnelRerouted,
mplsTunnelReoptimized
}
STATUS current
DESCRIPTION
"Set of notifications implemented in this module.
None is mandatory."
::= { mplsTeGroups 9 }
END
HP-SN-TRAP-MIB DEFINITIONS ::= BEGIN
-- Router Switch Trap MIB Release 1.0.0
-- Revision 06/02/97
-- Copyright 1996-1997 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry SNMP Management Information Base Specification
-- (Specification) embodies Foundry's confidential and
-- proprietary intellectual property. Foundry retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS," and Foundry makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
-- SECTION 1: Top Level Definitions
-- Imports
IMPORTS
TRAP-TYPE FROM RFC-1215
hp FROM HP-SN-ROOT-MIB
snChasPwrSupplyStatus,
snAgGblTrapMessage,
snAgentBrdIndex,
snChasPwrSupplyIndex,
snChasPwrSupplyDescription,
snChasFanIndex,
snChasFanDescription FROM HP-SN-AGENT-MIB
snSwViolatorPortNumber,
snSwViolatorMacAddress FROM HP-SN-SWITCH-GROUP-MIB
snL4MaxSessionLimit,
snL4TcpSynLimit,
snL4TrapRealServerIP,
snL4TrapRealServerName,
snL4TrapRealServerPort,
snL4TrapRealServerCurConnections FROM HP-SN-SW-L4-SWITCH-GROUP-MIB;
-- Textual Conventions
-- Groups
-- SECTION 2: MIB Objects
-- Trap Information
-- These definitions use the TRAP-TYPE macro as defined in RFC 1215.
-- Foundry Networks, Inc. Specific Traps
snTrapChasPwrSupply TRAP-TYPE
ENTERPRISE hp
VARIABLES { snChasPwrSupplyStatus }
DESCRIPTION
"The SNMP trap that is generated when a power supply fails
to operate normally. The value is a packed bit string;
the 2 power supplies status are encoded into 4 bits
(a nibble).
The following shows the meaning of each bit:
(bit 0 is the least significant bit).
bit position meaning
------------ -------
4-31 reserved
3 Power Supply 2 DC (0=bad, 1=good).
2 Power Supply 1 DC (0=bad, 1=good).
1 Power Supply 2 present status (0=present, 1=not-present).
0 Power Supply 1 present status (0=present, 1=not-present)."
--#TYPE "Foundry Trap: Power Supply Failure"
--#SUMMARY "Power supply fails, error status %d."
--#ARGUMENTS { 0 }
--#SEVERITY MINOR
--#STATE OPERATIONAL
::= 1
snTrapLockedAddressViolation TRAP-TYPE
ENTERPRISE hp
VARIABLES { snSwViolatorPortNumber, snSwViolatorMacAddress }
DESCRIPTION
"The SNMP trap that is generated when more source MAC addresses
are received from a port than the maximum number of addresses
configured to that port."
--#TYPE "Foundry Trap: MAC Addresses Violation"
--#SUMMARY "Lock address violation on Port %d with MAC Address %s."
--#ARGUMENTS { 0, 1 }
--#SEVERITY MINOR
--#STATE OPERATIONAL
::= 2
-- Trap IDs from 3 through 18 are used by OSPF. See Router Trap mib for definitions.
snTrapL4MaxSessionLimitReached TRAP-TYPE
ENTERPRISE hp
VARIABLES { snL4MaxSessionLimit }
DESCRIPTION
"The SNMP trap that is generated when the maximum number
of connections reached."
--#TYPE "Foundry Trap: L4 Session Limit"
--#SUMMARY "SLB maximum number of connections %d has been reached."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 19
snTrapL4TcpSynLimitReached TRAP-TYPE
ENTERPRISE hp
VARIABLES { snL4TcpSynLimit }
DESCRIPTION
"The SNMP trap that is generated when the number of TCP
SYN limits reached."
--#TYPE "Foundry Trap: L4 TCP Syn Limit"
--#SUMMARY "SLB TCP Syn limits %d has been reached."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 20
snTrapL4RealServerUp TRAP-TYPE
ENTERPRISE hp
VARIABLES { snL4TrapRealServerIP, snL4TrapRealServerName }
DESCRIPTION
"The SNMP trap that is generated when the load balancing
real server is up."
--#TYPE "Foundry Trap: L4 Real Server Up"
--#SUMMARY "SLB real server %s %s is up."
--#ARGUMENTS { 0, 1 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 21
snTrapL4RealServerDown TRAP-TYPE
ENTERPRISE hp
VARIABLES { snL4TrapRealServerIP, snL4TrapRealServerName }
DESCRIPTION
"The SNMP trap that is generated when the load balancing
real server is down."
--#TYPE "Foundry Trap: L4 Real Server Down"
--#SUMMARY "SLB real server %s %s is down."
--#ARGUMENTS { 0, 1 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 22
snTrapL4RealServerPortUp TRAP-TYPE
ENTERPRISE hp
VARIABLES { snL4TrapRealServerIP, snL4TrapRealServerName, snL4TrapRealServerPort }
DESCRIPTION
"The SNMP trap that is generated when the load balancing
real server TCP port is up."
--#TYPE "Foundry Trap: L4 Real Server Port Up"
--#SUMMARY "SLB real server port %s %s %d is up."
--#ARGUMENTS { 0, 1, 2 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 23
snTrapL4RealServerPortDown TRAP-TYPE
ENTERPRISE hp
VARIABLES { snL4TrapRealServerIP, snL4TrapRealServerName, snL4TrapRealServerPort }
DESCRIPTION
"The SNMP trap that is generated when the load balancing
real server TCP port is down."
--#TYPE "Foundry Trap: L4 Real Server Port Down"
--#SUMMARY "SLB real server port %s %s %d is down."
--#ARGUMENTS { 0, 1, 2 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 24
snTrapL4RealServerMaxConnectionLimitReached TRAP-TYPE
ENTERPRISE hp
VARIABLES { snL4TrapRealServerIP, snL4TrapRealServerName, snL4TrapRealServerCurConnections }
DESCRIPTION
"The SNMP trap that is generated when the real server reaches
maximum number of connections."
--#TYPE "Foundry Trap: L4 Real Server Max Connection Limit"
--#SUMMARY "SLB real server %s %s maximum connection %d has been reached."
--#ARGUMENTS { 0, 1, 2 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 25
snTrapL4BecomeStandby TRAP-TYPE
ENTERPRISE hp
DESCRIPTION
"The SNMP trap that is generated when the server load
balancing switch changes state from active to standby."
--#TYPE "Foundry Trap: L4 Server On Standby"
--#SUMMARY "SLB changes state from active to standby."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 26
snTrapL4BecomeActive TRAP-TYPE
ENTERPRISE hp
DESCRIPTION
"The SNMP trap that is generated when the server load
balancing switch changes state from standby to active."
--#TYPE "Foundry Trap: L4 Server Active"
--#SUMMARY "SLB changes state from standby to active."
--#ARGUMENTS { }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 27
snTrapModuleInserted TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgentBrdIndex }
DESCRIPTION
"The SNMP trap that is generated when a module was inserted
to the chassis during system running."
--#TYPE "Foundry Trap: Module Inserted"
--#SUMMARY "Module %d was inserted to the chassis during system running."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 28
snTrapModuleRemoved TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgentBrdIndex }
DESCRIPTION
"The SNMP trap that is generated when a module was removed
from the chassis during system running."
--#TYPE "Foundry Trap: Module Removed"
--#SUMMARY "Module %d was removed from the chassis during system running."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 29
snTrapChasPwrSupplyFailed TRAP-TYPE
ENTERPRISE hp
VARIABLES { snChasPwrSupplyIndex, snChasPwrSupplyDescription }
DESCRIPTION
"The SNMP trap that is generated when a power supply operational
status changed from normal to failure."
--#TYPE "Foundry Trap: Power Supply Failure"
--#SUMMARY "Power supply %d (%s) failed."
--#ARGUMENTS { 0, 1 }
--#SEVERITY MINOR
--#STATE OPERATIONAL
::= 30
snTrapChasFanFailed TRAP-TYPE
ENTERPRISE hp
VARIABLES { snChasFanIndex, snChasFanDescription }
DESCRIPTION
"The SNMP trap that is generated when a fan fails
to operate normally."
--#TYPE "Foundry Trap: Fan Failure"
--#SUMMARY "Fan %d (%s) failed."
--#ARGUMENTS { 0, 1 }
--#SEVERITY MINOR
--#STATE OPERATIONAL
::= 31
snTrapLockedAddressViolation2 TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when more source MAC addresses
are received from a port than the maximum number of addresses
configured to that port."
--#TYPE "Foundry Trap: Lock Address Violation"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY MINOR
--#STATE OPERATIONAL
::= 32
snTrapFsrpIfStateChange TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when a FSRP routing device
changed state from active to standby or vice-versa."
--#TYPE "Foundry Trap: FSRP Interface Change"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 33
snTrapVrrpIfStateChange TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when a VRRP routing device
switched between states master, backup, intialized or uknown."
--#TYPE "Foundry Trap: VRRP Interface Change"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 34
snTrapMgmtModuleRedunStateChange TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when the management module
changes redundancy state."
--#TYPE "Foundry Trap: Management Module Change State"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 35
snTrapTemperatureWarning TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when the actual temperature
reading is above the warning temperature threshold."
--#TYPE "Foundry Trap: Temperature Warning"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY CRITICAL
--#STATE OPERATIONAL
::= 36
snTrapAccessListDeny TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when a packet was denied
by an access list."
--#TYPE "Foundry Trap: Deny from ACL"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 37
snTrapMacFilterDeny TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when a packet was denied
by a MAC address filter."
--#TYPE "Foundry Trap: Deny from MAC Filter"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 38
snTrapL4GslbRemoteUp TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when the connection to the remote SI is established."
--#TYPE "Foundry Trap: Remote SI Up"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 39
snTrapL4GslbRemoteDown TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when the connection to the remote SI is down."
--#TYPE "Foundry Trap: Remote SI Down"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 40
snTrapL4GslbRemoteControllerUp TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when the connection to the GSLB SI is established."
--#TYPE "Foundry Trap: Remote GSLB SI Up"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 41
snTrapL4GslbRemoteControllerDown TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when the connection to the GSLB SI is down."
--#TYPE "Foundry Trap: Remote GSLB SI Down"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 42
snTrapL4GslbHealthCheckIpUp TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when GSLB health check for an address transitions
from down to active state."
--#TYPE "Foundry Trap: GSLB HealtCheck Up"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 43
snTrapL4GslbHealthCheckIpDown TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when GSLB health check for an address transitions
from active to down state."
--#TYPE "Foundry Trap: GSLB HealthCheck Down"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 44
snTrapL4GslbHealthCheckIpPortUp TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when a given port for a health check address is up."
--#TYPE "Foundry Trap: GSLB HealthCheck Port Up"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 45
snTrapL4GslbHealthCheckIpPortDown TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when a given port for a health check address is down."
--#TYPE "Foundry Trap: GSLB HealthCheck Port Down"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 46
snTrapL4FirewallBecomeStandby TRAP-TYPE
ENTERPRISE hp
DESCRIPTION
"The SNMP trap that is generated when the server load
balancing switch Firewall changes state from active to standby."
--#TYPE "Foundry Trap: Firewall Standby"
--#SUMMARY "Firewall changes state from active to standby."
--#ARGUMENTS { }
--#SEVERITY MAJOR
--#STATE OPERATIONAL
::= 47
snTrapL4FirewallBecomeActive TRAP-TYPE
ENTERPRISE hp
DESCRIPTION
"The SNMP trap that is generated when the server load
balancing switch Firewall changes state from standby to active."
--#TYPE "Foundry Trap: Firewall Active"
--#SUMMARY "Firewall changes state from standby to active."
--#ARGUMENTS { }
--#SEVERITY MAJOR
--#STATE OPERATIONAL
::= 48
snTrapL4FirewallPathUp TRAP-TYPE
ENTERPRISE hp
DESCRIPTION
"The SNMP trap that is generated when the server load
balancing switch Firewall path is up."
--#TYPE "Foundry Trap: Firewall Path Up"
--#SUMMARY "Firewall path is up."
--#ARGUMENTS { }
--#SEVERITY MINOR
--#STATE OPERATIONAL
::= 49
snTrapL4FirewallPathDown TRAP-TYPE
ENTERPRISE hp
DESCRIPTION
"The SNMP trap that is generated when the server load
balancing switch Firewall path is down."
--#TYPE "Foundry Trap: Firewall Path Down"
--#SUMMARY "Firewall path is down."
--#ARGUMENTS { }
--#SEVERITY MINOR
--#STATE OPERATIONAL
::= 50
snTrapIcmpLocalExceedBurst TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when incoming ICMP exceeds burst-MAX."
--#TYPE "Foundry Trap: ICMP Burst Exceeded"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 51
snTrapIcmpTransitExceedBurst TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when transit ICMP exceeds burst-MAX."
--#TYPE "Foundry Trap: Transit ICMP Burst Exceeded"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 52
snTrapTcpLocalExceedBurst TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when incoming TCP SYN exceeds burst-MAX."
--#TYPE "Foundry Trap: TCP SYN Burst Exceeded"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 53
snTrapTcpTransitExceedBurst TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when transit TCP exceeds burst-MAX."
--#TYPE "Foundry Trap: Transit TCP SYN Burst Exceeded"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 54
snTrapL4ContentVerification TRAP-TYPE
ENTERPRISE hp
DESCRIPTION
"The SNMP trap that is generated when the HTTP match-list pattern
is found."
--#TYPE "Foundry Trap: HTTP Match"
--#SUMMARY "HTTP match-list pattern is found."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 55
snTrapDuplicateIp TRAP-TYPE
ENTERPRISE hp
DESCRIPTION
"Duplicate IP address detected."
--#TYPE "Foundry Trap: Duplicate IP"
--#SUMMARY "Duplicate IP address detect."
--#ARGUMENTS { }
--#SEVERITY MAJOR
--#STATE OPERATIONAL
::= 56
snTrapMplsProblem TRAP-TYPE
ENTERPRISE hp
DESCRIPTION
"MPLS Problem Detected."
--#TYPE "Foundry Trap: MPLS Problem"
--#SUMMARY "MPLS Problem detect."
--#ARGUMENTS { }
--#SEVERITY MAJOR
--#STATE OPERATIONAL
::= 57
snTrapMplsException TRAP-TYPE
ENTERPRISE hp
DESCRIPTION
"MPLS Exception Detected."
--#TYPE "Foundry Trap: MPLS Exception"
--#SUMMARY "MPLS Exception detect."
--#ARGUMENTS { }
--#SEVERITY MAJOR
--#STATE OPERATIONAL
::= 58
snTrapMplsAudit TRAP-TYPE
ENTERPRISE hp
DESCRIPTION
"MPLS Audit Trap."
--#TYPE "Foundry Trap: MPLS Audit"
--#SUMMARY "MPLS Audit Trap."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 59
snTrapMplsDeveloper TRAP-TYPE
ENTERPRISE hp
DESCRIPTION
"MPLS Developer Trap."
--#TYPE "Foundry Trap: MPLS Developer"
--#SUMMARY "MPLS Developer Trap."
--#ARGUMENTS { }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 60
snTrapNoBmFreeQueue TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when no free queue is available in buffer manager."
--#TYPE "Foundry Trap: No BM Free Queue"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 61
snTrapSmcDmaDrop TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when SMC DMA packet is dropped."
--#TYPE "Foundry Trap: SMC DMA Packet Dropped"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 62
snTrapSmcBpDrop TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when SMC BackPlane packet is dropped."
--#TYPE "Foundry Trap: SMC BP Packet Dropped"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 63
snTrapBmWriteSeqDrop TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when BM write sequence packet is dropped."
--#TYPE "Foundry Trap: BM Write Sequence Packet Dropped"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 64
snTrapBgpPeerUp TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when the bgp peer is up."
--#TYPE "Foundry Trap: BGP Peer Up"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 65
snTrapBgpPeerDown TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when the bgp peer is down."
--#TYPE "Foundry Trap: BGP Peer Down"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 66
snTrapL4RealServerResponseTimeLowerLimit TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when the real server average response time exceeds lower threshold."
--#TYPE "Foundry Trap: L4 Real Server Response Exceeds Lower Threshold"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 67
snTrapL4RealServerResponseTimeUpperLimit TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when the real server average response time exceeds upper threshold."
--#TYPE "Foundry Trap: L4 Real Server Response Exceeds Upper Threshold"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 68
snTrapL4TcpAttackRateExceedMax TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when the TCP attack rate exceeds configured maximum."
--#TYPE "Foundry Trap: L4 TCP Attack Rate Exceed Max"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY CRITICAL
--#STATE OPERATIONAL
::= 69
snTrapL4TcpAttackRateExceedThreshold TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when the TCP attack rate exceeds 80% of configured maximum."
--#TYPE "Foundry Trap: L4 TCP Attack Rate Exceed Threshold"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 70
snTrapL4ConnectionRateExceedMax TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when the L4 connection rate exceeds configured maximum."
--#TYPE "Foundry Trap: L4 Connection Rate Exceed Max"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY CRITICAL
--#STATE OPERATIONAL
::= 71
snTrapL4ConnectionRateExceedThreshold TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when the L4 connection rate exceeds 80% of configured maximum"
--#TYPE "Foundry Trap: L4 Connection Rate Exceed Threshold"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 72
snTrapRunningConfigChanged TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when the running configuration
was changed."
--#TYPE "Foundry Trap: Running Configuration Changed"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 73
snTrapStartupConfigChanged TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when the startup configuration
was changed."
--#TYPE "Foundry Trap: Startup Configuration Changed"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 74
snTrapUserLogin TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when user login."
--#TYPE "Foundry Trap: User Login"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 75
snTrapUserLogout TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when user logout."
--#TYPE "Foundry Trap: User Logout"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 76
snTrapPortSecurityViolation TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when insecure MAC addresses
are received from a port with MAC security feature enabled."
--#TYPE "Foundry Trap: Port Security Violation"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY MINOR
--#STATE OPERATIONAL
::= 77
snTrapPortSecurityShutdown TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when insecure MAC addresses
are received from a port caused the port to shutdown."
--#TYPE "Foundry Trap: Port Security Violation Cause Shutdown"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY MINOR
--#STATE OPERATIONAL
::= 78
snTrapMrpStateChange TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when a MRP switching and routing device
changed state to disabled, blocking, preforwarding, forwarding, uknown."
--#TYPE "Foundry Trap: MRP Interface Change"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 79
snTrapMrpCamError TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when a MRP Cam Error occurs."
--#TYPE "Foundry Trap: MRP Cam Error"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 80
snTrapChasPwrSupplyOK TRAP-TYPE
ENTERPRISE hp
VARIABLES { snChasPwrSupplyIndex, snChasPwrSupplyDescription }
DESCRIPTION
"The SNMP trap that is generated when a power supply operational
status changed from failure to normal."
--#TYPE "Foundry Trap: Power Supply OK"
--#SUMMARY "Power supply %d (%s) OK."
--#ARGUMENTS { 0, 1 }
--#SEVERITY MINOR
--#STATE OPERATIONAL
::= 81
snTrapVrrpeIfStateChange TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when a VRRPE routing device
switched between states master, backup, intialized or uknown."
--#TYPE "Foundry Trap: VRRPE Interface Change"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 82
snTrapVsrpIfStateChange TRAP-TYPE
ENTERPRISE hp
VARIABLES { snAgGblTrapMessage }
DESCRIPTION
"The SNMP trap that is generated when a VSRP switching and routing device
switched between states master, backup, intialized or uknown."
--#TYPE "Foundry Trap: VSRP Interface Change"
--#SUMMARY "%s."
--#ARGUMENTS { 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 83
END
HP-SN-ROUTER-TRAP-MIB DEFINITIONS ::= BEGIN
-- Router Trap MIB Release 1.0.0
-- Revision 01/24/03
-- Copyright 1996-1997 Foundry Networks, Inc.
-- All rights reserved.
-- This Foundry SNMP Management Information Base Specification
-- (Specification) embodies Foundry's confidential and
-- proprietary intellectual property. Foundry retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS," and Foundry makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
-- SECTION 1: Top Level Definitions
-- Imports
IMPORTS
TRAP-TYPE FROM RFC-1215
hp FROM HP-SN-ROOT-MIB
snOspfRouterId,
snOspfIfStatusIpAddress,
snOspfIfStatusState,
snOspfVirtIfStatusAreaID,
snOspfVirtIfStatusNeighbor,
snOspfVirtIfStatusState,
snOspfNbrIpAddr,
snOspfNbrRtrId,
snOspfNbrState,
snOspfVirtNbrArea,
snOspfVirtNbrRtrId,
snOspfVirtNbrState,
snOspfPacketSrc,
snOspfConfigErrorType,
snOspfPacketType,
snOspfLsdbAreaId,
snOspfLsdbType,
snOspfLsdbLsId,
snOspfLsdbRouterId,
snOspfExtLsdbLimit FROM HP-SN-OSPF-GROUP-MIB;
-- Textual Conventions
-- Groups
-- SECTION 2: MIB Objects
-- Trap Information
-- These definitions use the TRAP-TYPE macro as defined in RFC 1215.
-- Foundry Networks, Inc. Specific Traps
snTrapOspfIfStateChange TRAP-TYPE
ENTERPRISE hp
VARIABLES {
snOspfRouterId, -- The originator of the trap
snOspfIfStatusIpAddress,
snOspfIfStatusState -- The new state
}
DESCRIPTION
"An ospfIfStateChange trap signifies that there
has been a change in the state of a non-virtual
OSPF interface. This trap should be generated
when the interface state regresses (e.g., goes
from Dr to Down) or progresses to a terminal
state (i.e., Point-to-Point, DR Other, Dr, or
Backup)."
--#TYPE "Foundry Trap: OSPF Interface State Change"
--#SUMMARY "OSPF router id %s, interface %s state changed to %d."
--#ARGUMENTS { 0, 1, 2 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 3
snTrapOspfVirtIfStateChange TRAP-TYPE
ENTERPRISE hp
VARIABLES {
snOspfRouterId, -- The originator of the trap
snOspfVirtIfStatusAreaID,
snOspfVirtIfStatusNeighbor,
snOspfVirtIfStatusState -- The new state
}
DESCRIPTION
"An ospfIfStateChange trap signifies that there
has been a change in the state of an OSPF vir-
tual interface.
This trap should be generated when the inter-
face state regresses (e.g., goes from Point-
to-Point to Down) or progresses to a terminal
state (i.e., Point-to-Point)."
--#TYPE "Foundry Trap: OSPF Virtual Interface State Change"
--#SUMMARY "OSPF router id %s, virtual interface area id %s neighbor %s state changed to %d."
--#ARGUMENTS { 0, 1, 2, 3 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 4
snOspfNbrStateChange TRAP-TYPE
ENTERPRISE hp
VARIABLES {
snOspfRouterId, -- The originator of the trap
snOspfNbrIpAddr,
snOspfNbrRtrId,
snOspfNbrState -- The new state
}
DESCRIPTION
"An ospfNbrStateChange trap signifies that
there has been a change in the state of a non-
virtual OSPF neighbor. This trap should be
generated when the neighbor state regresses
(e.g., goes from Attempt or Full to 1-Way or
Down) or progresses to a terminal state (e.g.,
2-Way or Full). When an neighbor transitions
from or to Full on non-broadcast multi-access
and broadcast networks, the trap should be gen-
erated by the designated router. A designated
router transitioning to Down will be noted by
ospfIfStateChange."
--#TYPE "Foundry Trap: OSPF Neighbour State Change"
--#SUMMARY "OSPF router id %s neighbor area %s, neighbor router id %s state changed to %d."
--#ARGUMENTS { 0, 1, 2, 3 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 5
snOspfVirtNbrStateChange TRAP-TYPE
ENTERPRISE hp
VARIABLES {
snOspfRouterId, -- The originator of the trap
snOspfVirtNbrArea,
snOspfVirtNbrRtrId,
snOspfVirtNbrState -- The new state
}
DESCRIPTION
"An ospfIfStateChange trap signifies that there
has been a change in the state of an OSPF vir-
tual neighbor. This trap should be generated
when the neighbor state regresses (e.g., goes
from Attempt or Full to 1-Way or Down) or
progresses to a terminal state (e.g., Full)."
--#TYPE "Foundry Trap: OSPF Virtual Neighbour State Change"
--#SUMMARY "OSPF router id %s virtual neighbor area %s, virtual neighbor router id %s state changed to %d."
--#ARGUMENTS { 0, 1, 2, 3 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 6
snOspfIfConfigError TRAP-TYPE
ENTERPRISE hp
VARIABLES {
snOspfRouterId, -- The originator of the trap
snOspfIfStatusIpAddress,
snOspfPacketSrc, -- The source IP address
snOspfConfigErrorType, -- Type of error
snOspfPacketType
}
DESCRIPTION
"An ospfIfConfigError trap signifies that a
packet has been received on a non-virtual in-
terface from a router whose configuration
parameters conflict with this router's confi-
guration parameters. Note that the event op-
tionMismatch should cause a trap only if it
prevents an adjacency from forming."
--#TYPE "Foundry Trap: OSPF Interface Configuration Error"
--#SUMMARY "configuration error type %d with packet type %d has been received on interface %s, router id %s from %s."
--#ARGUMENTS { 3, 4, 1, 0, 2 }
--#SEVERITY MAJOR
--#STATE OPERATIONAL
::= 7
snOspfVirtIfConfigError TRAP-TYPE
ENTERPRISE hp
VARIABLES {
snOspfRouterId, -- The originator of the trap
snOspfVirtIfStatusAreaID,
snOspfVirtIfStatusNeighbor,
snOspfConfigErrorType, -- Type of error
snOspfPacketType
}
DESCRIPTION
"An ospfConfigError trap signifies that a pack-
et has been received on a virtual interface
from a router whose configuration parameters
conflict with this router's configuration
parameters. Note that the event optionMismatch
should cause a trap only if it prevents an ad-
jacency from forming."
--#TYPE "Foundry Trap: OSPF Virtual Interface Configuration Error"
--#SUMMARY "configuration error type %d with packet type %d has been received on virtual interface area id %s, router id %s from neighbor %s."
--#ARGUMENTS { 3, 4, 1, 0, 2 }
--#SEVERITY MAJOR
--#STATE OPERATIONAL
::= 8
snOspfIfAuthFailure TRAP-TYPE
ENTERPRISE hp
VARIABLES {
snOspfRouterId, -- The originator of the trap
snOspfIfStatusIpAddress,
snOspfPacketSrc, -- The source IP address
snOspfConfigErrorType, -- authTypeMismatch or
-- authFailure
snOspfPacketType
}
DESCRIPTION
"An ospfIfAuthFailure trap signifies that a
packet has been received on a non-virtual in-
terface from a router whose authentication key
or authentication type conflicts with this
router's authentication key or authentication
type."
--#TYPE "Foundry Trap: OSPF Interface Authentication Failure"
--#SUMMARY "OSPF authentication failed. Router ID %s,Interface %s, packet src %s, error type %d and packet type %d."
--#ARGUMENTS { 0, 1, 2, 3, 4 }
--#SEVERITY MINOR
--#STATE OPERATIONAL
::= 9
snOspfVirtIfAuthFailure TRAP-TYPE
ENTERPRISE hp
VARIABLES {
snOspfRouterId, -- The originator of the trap
snOspfVirtIfStatusAreaID,
snOspfVirtIfStatusNeighbor,
snOspfConfigErrorType, -- authTypeMismatch or
-- authFailure
snOspfPacketType
}
DESCRIPTION
"An ospfVirtIfAuthFailure trap signifies that a
packet has been received on a virtual interface
from a router whose authentication key or au-
thentication type conflicts with this router's
authentication key or authentication type."
--#TYPE "Foundry Trap: OSPF Virtual Interface Authentication Failure"
--#SUMMARY "OSPF authentication failed. Router ID %s,virtual interface %s, Neigbor %s, Error type %d and packet type %d."
--#ARGUMENTS { 0, 1, 2, 3, 4 }
--#SEVERITY MINOR
--#STATE OPERATIONAL
::= 10
snOspfIfRxBadPacket TRAP-TYPE
ENTERPRISE hp
VARIABLES {
snOspfRouterId, -- The originator of the trap
snOspfIfStatusIpAddress,
snOspfPacketSrc, -- The source IP address
snOspfPacketType
}
DESCRIPTION
"An ospfIfRxBadPacket trap signifies that an
OSPF packet has been received on a non-virtual
interface that cannot be parsed."
--#TYPE "Foundry Trap: OSPF Interface Receive Bad Packet"
--#SUMMARY "OSPF Router Id %s, interface %s receive bad packet (type %d) from %s."
--#ARGUMENTS { 0, 1, 3, 2 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 11
snOspfVirtIfRxBadPacket TRAP-TYPE
ENTERPRISE hp
VARIABLES {
snOspfRouterId, -- The originator of the trap
snOspfVirtIfStatusAreaID,
snOspfVirtIfStatusNeighbor,
snOspfPacketType
}
DESCRIPTION
"An ospfRxBadPacket trap signifies that an OSPF
packet has been received on a virtual interface
that cannot be parsed."
--#TYPE "Foundry Trap: OSPF Virt Interface Receive Bad Packet"
--#SUMMARY "OSPF router id %s, virtual interface %s received bad packet (type %d) from neighbor %s."
--#ARGUMENTS { 0, 1, 3, 2 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 12
snOspfTxRetransmit TRAP-TYPE
ENTERPRISE hp
VARIABLES {
snOspfRouterId, -- The originator of the trap
snOspfIfStatusIpAddress,
snOspfNbrRtrId, -- Destination
snOspfPacketType,
snOspfLsdbType,
snOspfLsdbLsId,
snOspfLsdbRouterId
}
DESCRIPTION
"An ospfTxRetransmit trap signifies than an
OSPF packet has been retransmitted on a non-
virtual interface. All packets that may be re-
transmitted are associated with an LSDB entry.
The LS type, LS ID, and Router ID are used to
identify the LSDB entry."
--#TYPE "Foundry Trap: OSPF Retransmit"
--#SUMMARY "OSPF router id %s, interface %s retransmited packet type %d,LSDB type %d, LSDB LS ID %s and LSDB router id %s to neightbor router id %s."
--#ARGUMENTS { 0, 1, 3, 4, 5, 6, 2 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 13
ospfVirtIfTxRetransmit TRAP-TYPE
ENTERPRISE hp
VARIABLES {
snOspfRouterId, -- The originator of the trap
snOspfVirtIfStatusAreaID,
snOspfVirtIfStatusNeighbor,
snOspfPacketType,
snOspfLsdbType,
snOspfLsdbLsId,
snOspfLsdbRouterId
}
DESCRIPTION
"An ospfTxRetransmit trap signifies than an
OSPF packet has been retransmitted on a virtual
interface. All packets that may be retransmit-
ted are associated with an LSDB entry. The LS
type, LS ID, and Router ID are used to identify
the LSDB entry."
--#TYPE "Foundry Trap: OSPF Virt Interface Retransmit"
--#SUMMARY "OSPF router id %s, virtual interface area id %s retransmited packet type %d,LSDB type %d, LSDB LS ID %s and LSDB router id %s to neightbor %s."
--#ARGUMENTS { 0, 1, 3, 4, 5, 6, 2 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 14
snOspfOriginateLsa TRAP-TYPE
ENTERPRISE hp
VARIABLES {
snOspfRouterId, -- The originator of the trap
snOspfLsdbAreaId, -- 0.0.0.0 for AS Externals
snOspfLsdbType,
snOspfLsdbLsId,
snOspfLsdbRouterId
}
DESCRIPTION
"An ospfOriginateLsa trap signifies that a new
LSA has been originated by this router. This
trap should not be invoked for simple refreshes
of LSAs (which happesn every 30 minutes), but
instead will only be invoked when an LSA is
(re)originated due to a topology change. Addi-
tionally, this trap does not include LSAs that
are being flushed because they have reached
MaxAge."
--#TYPE "Foundry Trap: OSPF Originate LSA"
--#SUMMARY "New LSA (area id %s, type %d, LS Id %s and router id %s) has been originated by router id %s."
--#ARGUMENTS { 1, 2, 3, 4, 0 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 15
snOspfMaxAgeLsa TRAP-TYPE
ENTERPRISE hp
VARIABLES {
snOspfRouterId, -- The originator of the trap
snOspfLsdbAreaId, -- 0.0.0.0 for AS Externals
snOspfLsdbType,
snOspfLsdbLsId,
snOspfLsdbRouterId
}
DESCRIPTION
"An ospfMaxAgeLsa trap signifies that one of
the LSA in the router's link-state database has
aged to MaxAge."
--#TYPE "Foundry Trap: OSPF MaxAge LSA"
--#SUMMARY "The LSA (area id %s, type %d, LS Id %s and router id %s) in router id %s link-state database has aged to maximum age."
--#ARGUMENTS { 1, 2, 3, 4, 0 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 16
snOspfLsdbOverflow TRAP-TYPE
ENTERPRISE hp
VARIABLES {
snOspfRouterId, -- The originator of the trap
snOspfExtLsdbLimit
}
DESCRIPTION
"An ospfLsdbOverflow trap signifies that the
number of LSAs in the router's link-state data-
base has exceeded ospfExtLsdbLimit."
--#TYPE "Foundry Trap: OSPF LS DB Overflow"
--#SUMMARY "The number of LSAs in the OSPF router id %s link-state database has exceeded %d."
--#ARGUMENTS { 0, 1 }
--#SEVERITY WARNING
--#STATE OPERATIONAL
::= 17
snOspfLsdbApproachingOverflow TRAP-TYPE
ENTERPRISE hp
VARIABLES {
snOspfRouterId, -- The originator of the trap
snOspfExtLsdbLimit
}
DESCRIPTION
"An ospfLsdbApproachingOverflow trap signifies
that the number of LSAs in the router's link-
state database has exceeded ninety percent of
ospfExtLsdbLimit."
--#TYPE "Foundry Trap: OSPF LS DB Near Full"
--#SUMMARY "The number of LSAs in the OSPF router id %s link-state database has exceeded ninety percent of %d."
--#ARGUMENTS { 0, 1 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= 18
END
Reference in New Issue View Git Blame Copy Permalink