mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
librenms-librenms/mibs/VPLS-GENERIC-DRAFT-01-MIB
Adam Amstrong 8c83b6a3c7 update foundry mibs 
git-svn-id: http://www.observium.org/svn/observer/trunk@3250 61d68cd4-352d-0410-923a-c4978735b2b8
2012-05-29 13:08:01 +00:00

759 lines
27 KiB
Plaintext
Raw Blame History

VPLS-GENERIC-DRAFT-01-MIB DEFINITIONS ::= BEGIN
IMPORTS
NOTIFICATION-TYPE, MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32, Counter32
FROM SNMPv2-SMI -- RFC2578
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF -- RFC2580
TruthValue, RowStatus, StorageType
FROM SNMPv2-TC -- RFC2579
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- RFC3411
PwIndexType
FROM PW-TC-STD-MIB
VPNIdOrZero
FROM VPN-TC-STD-MIB -- RFC4265
vplsRoot
FROM FOUNDRY-SN-ROOT-MIB --snroot
;
vplsGenericDraft01MIB MODULE-IDENTITY
LAST-UPDATED "200608301200Z" -- 30 Aug 2006 12:00:00 GMT
ORGANIZATION "Layer 2 Virtual Private Networks (L2VPN)
Working Group"
CONTACT-INFO
"
Thomas D. Nadeau
Email: tnadeau@cisco.com
The L2VPN Working Group (email distribution l2vpn@ietf.org,
http://www.ietf.org/html.charters/l2vpn-charter.html)
"
DESCRIPTION
"Copyright (C) The IETF Trust (2008). The initial
version of this MIB module was published in RFC XXXX.
-- RFC Editor: Please replace XXXX with RFC number & remove
-- this note.
For full legal notices see the RFC itself or see:
http://www.ietf.org/copyrights/ianamib.html
This MIB module contains generic managed object definitions
for Virtual Private LAN Services as in [L2VPN-VPLS-LDP] and
[L2VPN-VPLS-BGP]
This MIB module enables the use of any underlying Pseudo Wire
network."
-- Revision history.
REVISION
"200608301200Z" -- 30 August 2006 12:00:00 GMT
DESCRIPTION
"Changes from previous version:
1) Moved LDP Specific information to VPLS-LDP-DRAFT-01-MIB
2) Created the vplsStatusTable to store status information.
3)
"
REVISION
"200606041200Z" -- 4 June 2006 12:00:00 GMT
DESCRIPTION "Initial version published as part of RFC YYYY."
-- RFC Editor: please replace YYYY with IANA assigned value, and
-- delete this note.
-- ::= { transmission XXXX }
::= { vplsRoot 1 } -- OID assigned under fdry experimental branch.
-- RFC Editor: please replace XXXX with IANA assigne value, and
-- delete this note.
-- Top-level components of this MIB.
-- Notifications
vplsNotifications OBJECT IDENTIFIER
::= { vplsGenericDraft01MIB 0 }
-- Tables, Scalars
vplsObjects OBJECT IDENTIFIER
::= { vplsGenericDraft01MIB 1 }
-- Conformance
vplsConformance OBJECT IDENTIFIER
::= { vplsGenericDraft01MIB 2 }
-- PW Virtual Connection Table
vplsConfigIndexNext OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to be used
for vplsConfigIndex when creating entries in the
vplsConfigTable. The value 0 indicates that no
unassigned entries are available. To obtain the
value of vplsConfigIndex for a new entry in the
vplsConfigTable, the manager issues a management
protocol retrieval operation to obtain the current
value of vplsConfigIndex. After each retrieval
operation, the agent should modify the value to
reflect the next unassigned index. After a manager
retrieves a value the agent will determine through
its local policy when this index value will be made
available for reuse."
::= { vplsObjects 1 }
vplsConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF VplsConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies information for configuring
and monitoring Virtual Private Lan Services(VPLS).
"
::= { vplsObjects 2 }
vplsConfigEntry OBJECT-TYPE
SYNTAX VplsConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents a Virtual Private Lan
Service(VPLS) in a packet network. It is indexed by
vplsConfigIndex, which uniquely identifies a single VPLS.
A row is created by the operator or by the agent if a
VPLS service is created by non-SNMP application or
due to autodiscovery process.
None of the read-create objects values can be
changed when vplsConfigRowStatus is in the active(1)
state. Changes are allowed when the vplsConfigRowStatus
is in notInService(2) or notReady(3) states only.
If the operator need to change one of the values
for an active row the vplsConfigRowStatus should be
first changed to notInService(2), the objects may
be changed now, and later to active(1) in order to
re-initiate the signaling process with the new
values in effect.
"
INDEX { vplsConfigIndex }
::= { vplsConfigTable 1 }
VplsConfigEntry ::=
SEQUENCE {
vplsConfigIndex Unsigned32,
vplsConfigName SnmpAdminString,
vplsConfigDescr SnmpAdminString,
vplsConfigAdminStatus INTEGER,
vplsConfigMacLearning TruthValue,
vplsConfigDiscardUnknownDest TruthValue,
vplsConfigMacAging TruthValue,
vplsConfigFwdFullHighWatermark Unsigned32,
vplsConfigFwdFullLowWatermark Unsigned32,
vplsConfigRowStatus RowStatus,
vplsConfigMtu Unsigned32,
vplsConfigVpnId VPNIdOrZero,
vplsConfigServiceType INTEGER,
vplsConfigStorageType StorageType
}
vplsConfigIndex OBJECT-TYPE
SYNTAX Unsigned32 (1.. 2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique index for the conceptual row identifying
a VPLS service."
::= { vplsConfigEntry 1 }
vplsConfigName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A textual name of the VPLS.
If there is no local name, or this object is
otherwise not applicable, then this object MUST
contain a zero-length octet string."
DEFVAL { "" }
::= { vplsConfigEntry 2 }
vplsConfigDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A textual string containing information about the
VPLS service. If there is no information for this VPLS
service, then this object MUST contain a zero-length
octet string."
DEFVAL { "" }
::= { vplsConfigEntry 3 }
vplsConfigAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3) -- in some test mode
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired administrative state of the VPLS
service. If the administrative status of the
Vpls service is changed to enable then this
service is able to utilize the pseudo wire to
perform the tasks of a VPLS service.
The testing(3) state indicates that no operational
packets can be passed. "
DEFVAL { down }
::= { vplsConfigEntry 4 }
vplsConfigMacLearning OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies if MAC Learning is enabled
in this service. If this object is true then Mac
Learning is enabled. If false, then Mac Learning is
disabled."
DEFVAL { true }
::= { vplsConfigEntry 6 }
vplsConfigDiscardUnknownDest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the value of this object is 'true', then frames
received with an unknown destination MAC are discarded
in this VPLS. If 'false', then the packets are
processed."
DEFVAL { false }
::= { vplsConfigEntry 7 }
vplsConfigMacAging OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the value of this object is 'true'
then the MAC ageing process is enabled in
this VPLS. If 'false', then the MAC ageing process
is disabled"
DEFVAL { true }
::= { vplsConfigEntry 8 }
vplsConfigFwdFullHighWatermark OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percentage"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the utilization of the
forwarding database for this VPLS instance at
which the vplsFwdFullAlarmRaised notification
will be sent."
DEFVAL { 95 }
::= { vplsConfigEntry 10 }
vplsConfigFwdFullLowWatermark OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "percentage"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the utilization of the
forwarding database for this VPLS instance
at which the vplsFwdFullAlarmCleared
notification will be sent."
DEFVAL { 90 }
::= { vplsConfigEntry 11 }
vplsConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For creating, modifying, and deleting this row.
None of the read-create objects in the
conceptual rows may be changed when this
object is in the active(1) state."
::= { vplsConfigEntry 12 }
vplsConfigMtu OBJECT-TYPE
SYNTAX Unsigned32 (64..1518)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object specifies the MTU of this
vpls instance."
DEFVAL { 1518 }
::= { vplsConfigEntry 13 }
vplsConfigVpnId OBJECT-TYPE
SYNTAX VPNIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This objects indicates the IEEE 802-1990
VPN ID of the associated VPLS service."
-- Ed note: Should we import the VPNIdOrZero TC or
-- define a new TC?
::= { vplsConfigEntry 14 }
vplsConfigServiceType OBJECT-TYPE
SYNTAX INTEGER {
vlan (1),
ethernet (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object specifies the type of
service emulated by this vpls instance."
DEFVAL { vlan }
::= { vplsConfigEntry 15 }
vplsConfigStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the storage type for this row."
DEFVAL { volatile }
::= { vplsConfigEntry 16 }
-- VPLS Status table
vplsStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VplsStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides information for monitoring
Virtual Private Lan Services(VPLS).
"
::= { vplsObjects 3 }
vplsStatusEntry OBJECT-TYPE
SYNTAX VplsStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents a Virtual Private Lan
Service(VPLS) in a packet network. It is indexed by
vplsConfigIndex, which uniquely identifies a single VPLS.
A row in this table is automatically created by the agent
when a VPLS service is configured.
"
INDEX { vplsConfigIndex }
::= { vplsStatusTable 1 }
VplsStatusEntry ::=
SEQUENCE {
vplsStatusOperStatus INTEGER,
vplsStatusPeerCount Counter32
}
vplsStatusOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(0),
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of this VPLS Service."
::= { vplsStatusEntry 1 }
vplsStatusPeerCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This objects specifies the number of peers
present in this vpls instance."
::= { vplsStatusEntry 2 }
-- VPLS PW Binding Table
vplsPwBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF VplsPwBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides an association between a
VPLS service and the corresponding Pseudo
Wires. A service can have more than one Pseudo
Wire association. Pseudo Wires are defined in
the pwTable"
::= { vplsObjects 4 }
vplsPwBindEntry OBJECT-TYPE
SYNTAX VplsPwBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row represents an association between a
VPLS instance and one or more Pseudo Wires
defined in the pwTable. Each index is unique
in describing an entry in this table. However
both indexes are required to define the one
to many association of service to
pseudowire."
INDEX { vplsConfigIndex, vplsPwBindIndex }
::= { vplsPwBindTable 1 }
VplsPwBindEntry ::=
SEQUENCE {
vplsPwBindIndex PwIndexType,
vplsPwBindConfigType INTEGER,
vplsPwBindType INTEGER,
vplsPwBindRowStatus RowStatus,
vplsPwBindStorageType StorageType
}
vplsPwBindIndex OBJECT-TYPE
SYNTAX PwIndexType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Secondary Index for the conceptual row identifying
a pseudowire within the PwEntry which MUST
match an entry from the PW-STD-MIB's PwTable
which represents an already-provisioned
pseuwowire that is then associated with this
VPLS instance."
::= { vplsPwBindEntry 1 }
vplsPwBindConfigType OBJECT-TYPE
SYNTAX INTEGER {
manual (1),
autodiscovery (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object indicates
whether the Pseudo Wire binding was created
manually or via autodiscovery.
The value of this object must be
specifed when the row is created and cannot
be changed while the row status is active(1)"
::= { vplsPwBindEntry 2 }
vplsPwBindType OBJECT-TYPE
SYNTAX INTEGER {
mesh (1),
spoke (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object indicates
whether the Pseudo Wire binding is of
type mesh or spoke.
The value of this object must be
specifed when the row is created and cannot
be changed while the row status is active(1)"
::= { vplsPwBindEntry 3 }
vplsPwBindRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For creating, modifying, and deleting this row.
None of the read-create objects in the
conceptual rows may be changed when this
object is in the active(1) state"
::= { vplsPwBindEntry 4 }
vplsPwBindStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the storage type for this row."
DEFVAL { volatile }
::= { vplsPwBindEntry 5 }
vplsStatusNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is set to true(1), then it enables
the emission of vplsStatusChanged
notification; otherwise this notification is not
emitted."
REFERENCE
"See also [RFC3413] for explanation that
notifications are under the ultimate control of the
MIB module in this document."
DEFVAL { false }
::= { vplsObjects 5 }
vplsNotificationMaxRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the maximum number of
notifications issued per second. If events occur
more rapidly, the implementation may simply fail to
emit these notifications during that period, or may
queue them until an appropriate time. A value of 0
means no throttling is applied and events may be
notified at the rate at which they occur."
DEFVAL { 0 }
::= { vplsObjects 6 }
-- VPLS Service Notifications
vplsStatusChanged NOTIFICATION-TYPE
OBJECTS {
vplsConfigVpnId,
vplsConfigAdminStatus,
vplsStatusOperStatus
}
STATUS current
DESCRIPTION
"The vplsStatusChanged notification is generated
when there is a change in the administrative or
operating status of a VPLS service.
This notification is not supported as VPLS instance is always up."
--#ENABLE FALSE
::= { vplsNotifications 1 }
vplsFwdFullAlarmRaised NOTIFICATION-TYPE
OBJECTS {
vplsConfigVpnId,
vplsConfigFwdFullHighWatermark,
vplsConfigFwdFullLowWatermark
}
STATUS current
DESCRIPTION
"The vplsFwdFullAlarmRaised notification is
generated when the utilization of the Forwarding
database is above the value specified by
vplsConfigFwdFullHighWatermark.
This notification is not supported by the device."
--#ENABLE FALSE
::= { vplsNotifications 2 }
vplsFwdFullAlarmCleared NOTIFICATION-TYPE
OBJECTS {
vplsConfigVpnId,
vplsConfigFwdFullHighWatermark,
vplsConfigFwdFullLowWatermark
}
STATUS current
DESCRIPTION
"The vplsFwdFullAlarmCleared notification is
generated when the utilization of the Forwarding
database is below the value specified by
vplsConfigFwdFullLowWatermark.
This notification is not supported by the device."
--#ENABLE FALSE
::= { vplsNotifications 3 }
-- Compliance requirement for read-only implementations.
vplsCompliances
OBJECT IDENTIFIER ::= { vplsConformance 1 }
vplsModuleFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance requirement for implementations that
provide full support for VPLS-GENERIC-DRAFT-01-MIB.
Such devices can then be monitored and configured using
this MIB module."
MODULE -- this module
MANDATORY-GROUPS {
vplsGroup,
vplsPwBindGroup,
vplsNotificationGroup
}
::= { vplsCompliances 1 }
vplsModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance requirement for implementations that only
provide read-only support for VPLS-GENERIC-DRAFT-01-MIB.
Such devices can then be monitored but cannot be
configured using this MIB modules."
MODULE -- this module
MANDATORY-GROUPS {
vplsGroup,
vplsPwBindGroup,
vplsNotificationGroup
}
OBJECT vplsConfigName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT vplsConfigDescr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT vplsConfigAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT vplsConfigMacLearning
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT vplsConfigDiscardUnknownDest
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT vplsConfigMacAging
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT vplsConfigFwdFullHighWatermark
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT vplsConfigFwdFullLowWatermark
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT vplsConfigRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT vplsConfigMtu
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT vplsConfigServiceType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT vplsPwBindConfigType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT vplsPwBindType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT vplsPwBindRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { vplsCompliances 2 }
-- Units of conformance.
vplsGroups
OBJECT IDENTIFIER ::= { vplsConformance 2 }
vplsGroup OBJECT-GROUP
OBJECTS {
vplsConfigName,
vplsConfigDescr,
vplsConfigAdminStatus,
vplsConfigMacLearning,
vplsConfigDiscardUnknownDest,
vplsConfigMacAging,
vplsConfigVpnId,
vplsConfigFwdFullHighWatermark,
vplsConfigFwdFullLowWatermark,
vplsConfigRowStatus,
vplsConfigIndexNext,
vplsConfigMtu,
vplsConfigServiceType,
vplsConfigStorageType,
vplsStatusOperStatus,
vplsStatusPeerCount,
vplsStatusNotifEnable,
vplsNotificationMaxRate
}
STATUS current
DESCRIPTION
"The group of objects supporting
management of L2VPN VPLS services"
::= { vplsGroups 1 }
vplsPwBindGroup OBJECT-GROUP
OBJECTS {
vplsPwBindConfigType,
vplsPwBindType,
vplsPwBindRowStatus,
vplsPwBindStorageType
}
STATUS current
DESCRIPTION
"The group of objects supporting
management of
Pseudo Wire (PW) Binding to VPLS."
::= { vplsGroups 2 }
vplsNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
vplsStatusChanged,
vplsFwdFullAlarmRaised,
vplsFwdFullAlarmCleared
}
STATUS current
DESCRIPTION
"The group of notifications supporting
the Notifications generated for
VPLS Services"
::= { vplsGroups 3 }
END
Reference in New Issue View Git Blame Copy Permalink