mirror of
https://github.com/librenms/librenms.git
synced 2024-10-07 16:52:45 +00:00
06b85f5b07
* clean 1-Minute-Polling.md formatting * cleanup formatting for Adding-a-Device.md * clean up formatting of Cleanup-options.md * cleanup formatting some for CLI-Tools.md * cleanup formatting for Syslog.md and Configuration.md * cleanup formatting for Device-Sensors.md * cleanup formatting for Device-Troubleshooting.md * cleanup Discovery Support.md * cleanup Environment-Variables.md * cleanup Example-Hardware-Setup.md and FAQ.mg * update Features.md, Install Validation.md, Perfermance.md, Poller Support.md, and index.md * cleanup Remote-Monitoring-VPN.md, SNMP-Configuration-Examples.md, and SSL-Configuration.md * lots of updates for Installation docs * more installation doc cleanup * more formatting cleanup * clean Work-Map.md up some
1.3 KiB
1.3 KiB
source: Extensions/metrics/Graphite.md path: blob/master/doc/
Enabling support for Graphite
This module sends all metrics to a remote graphite service. You need something like Grafana for graphing.
What you don't get
- Pretty graphs, this is why at present you need Grafana. You need to build your own graphs within Grafana.
RRD will continue to function as normal so LibreNMS itself should continue to function as normal.
Configuration
$config['graphite']['enable'] = true;
$config['graphite']['host'] = 'your.graphite.server';
$config['graphite']['port'] = 2003; // this defaults to 2003 and is usually not needed
$config['graphite']['prefix'] = 'your.metric.prefix';
Your metric path can be prefixed if required, otherwise the metric
path for Graphite will be in the form of
hostname.measurement.fieldname, interfaces will be stored as
hostname.ports.ifName.fieldname.
The same data then stored within rrd will be sent to Graphite and recorded. You can then create graphs within Grafana to display the information you need.
Graphite Configuration
As LibreNMS updates its metrics every 5 minutes, the following addition to your storage-schemas.conf is suggested.
[network]
pattern = your\.metric\.prefix\..*
retentions = 5m:30d,15m:90d,1h:1y