mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
librenms-librenms/mibs/ALTIGA-SESSION-STATS-MIB
Adam Amstrong 53a4e91e8c clean up more mib names (remove .txt, .mib, .my) 
git-svn-id: http://www.observium.org/svn/observer/trunk@1645 61d68cd4-352d-0410-923a-c4978735b2b8
2010-08-04 16:11:32 +00:00

2094 lines
71 KiB
Plaintext
Raw Blame History

-- *------------------------------------------------------------------
-- * ALTIGA-SESSION-STATS-MIB.my: Altiga Session Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002, 2003, 2005 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-SESSION-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, Counter32, Unsigned32, Gauge32, TimeTicks
FROM SNMPv2-SMI
RowStatus, DisplayString, MacAddress, TEXTUAL-CONVENTION
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsSession, alSessionGroup
FROM ALTIGA-MIB
alSessionMibModule
FROM ALTIGA-GLOBAL-REG;
altigaSessionStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200501260000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga Session Statistics MIB models counters and objects that are
of management interest for sessions.
Acronyms
The following acronyms are used in this document:
MIB: Management Information Base
ACS: Access Control Server
"
REVISION "200501260000Z"
DESCRIPTION
"Added NAC objects alActiveNacAcceptedSessions,
alTotalNacAcceptedSessions.
alActiveNacRejectedSessions,
alTotalNacRejectedSessions.
alActiveNacExemptedSessions,
alTotalNacExemptedSessions.
alActiveNacNonresponsiveSessions,
alTotalNacNonresponsiveSessions.
alActiveNacHoldoffSessions,
alTotalNacHoldoffSessions.
alActiveNacDisabledSessions,
alTotalNacDisabledSessions.
alActiveSessionNacResult,
alActiveSessionSubEntryNacRevalTimer.
alActiveSessionSubEntryNacTimetoReval,
alActiveSessionSubEntryNacSqTimer.
alActiveSessionSubEntryNacSessionAge,
alActiveSessionSubEntryNacHoldTimer,
alActiveSessionSubEntryNacPosture.
alActiveSessionSubEntryNacRedirectUrl."
REVISION "200309090000Z"
DESCRIPTION
"Added new enum value to SessionProtocol and EncryptionAlgorithm.
Added alActiveSessionMaxWebVpnUsers and alWeightedSessionCount objects"
REVISION "200303170000Z"
DESCRIPTION
"Added alActiveSessionFilterId object"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alSessionMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsSessionGlobal OBJECT IDENTIFIER ::= { alStatsSession 1 }
SessionProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Session Protocol for Active Sessions.
As noted in the comments below, some values
will not be seen as a subentry, and others
will not be seen as an entry.
httpsTunnel - SSL Tunnel Client session"
SYNTAX INTEGER {
pptp(1),
l2tp(2),
ipsec(3), -- A subentry SA or Remote Access
http(4), -- Not a subentry
ftp(5), -- Not a subentry
telnet(6), -- Not a subentry
snmp(7), -- Not a subentry
tftp(8), -- Not a subentry
console(9), -- Not a subentry
debugTelnet(10), -- Not a subentry
debugConsole(11), -- Not a subentry
other(12),
ike(13), -- Not an entry
l2tpOverIpSec(14), -- Not a subentry
ipsecLanToLan(15), -- Not a subentry
ipsecOverUdp(16),
ssh(17), -- Not a subentry
vcaLanToLan(18),
ipsecOverTcp(19),
pppoe(20), -- Not a subentry
ipsecOverNatT(21), -- Not a subentry
ipsecLan2LanOverNatT(22), -- Not a subentry
l2tpOverIpsecOverNatT(23),
userHttps(24),
pop3s(25),
imap4s(26),
smtps(27),
httpsTunnel(28)
}
EncryptionAlgorithm ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Encryption Algorithm for Active Sessions."
SYNTAX INTEGER {
none(1),
des56(2),
des40(3),
des168(4),
rc4Stateless40(5),
rc4Statefull40(6),
rc4Stateless128(7),
rc4Statefull128(8),
aes128(9),
aes192(10),
aes256(11),
sslv3(64),
sslv3des56(66), -- +64
sslv3des168(68), -- +64
sslv3rc4Statefull128(72), -- +64
tlsv1(128),
tlsv1des56(130), -- +128
tlsv1des168(132), -- +128
tlsv1rc4Statefull128(136) -- +128
}
CompressionAlgorithm ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Compression Algorithm for Active Sessions."
SYNTAX INTEGER {
none(0),
lzs(1),
deflate(2),
lz(3) -- MPPC
}
NacResult ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"NAC result for remote access IPsec sessions.
unknown - Posture Validation (authentication of NAC credentials) result none.
accepted - Access-Accept received from ACS.
rejected - Access-Reject received from ACS.
exempted - Exempted from Posture Validation.
nonResponsive - No response to Posture Validation requests.
notApplicable - NAC is disabled.
holdoff - NAC session in Hold-off state."
SYNTAX INTEGER {
unknown(0),
accepted(1),
rejected(2),
exempted(3),
nonResponsive(4),
notApplicable(5),
holdoff(6)
}
alActiveSessionCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of currently active sessions."
::= { alStatsSessionGlobal 1 }
alTotalSessionCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of sessions since the device booted."
::= { alStatsSessionGlobal 2 }
alActiveSessionLastUpdate OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last time the summary stats were updated."
::= { alStatsSessionGlobal 3 }
alActiveSessionMaxUsers OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of user sessions allowed."
::= { alStatsSessionGlobal 4 }
alActiveSessionGroupIdLock OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group id lock for top 10 list."
::= { alStatsSessionGlobal 5 }
alMaxSessionCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest number of sessions since the device booted."
::= { alStatsSessionGlobal 6 }
alActiveLanToLanSessionCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of currently active LAN-to-LAN sessions."
::= { alStatsSessionGlobal 7 }
alActiveManagementSessionCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of currently active management sessions."
::= { alStatsSessionGlobal 8 }
alActiveRemoteAccessSessionCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of currently active Remote Access sessions."
::= { alStatsSessionGlobal 9 }
alActiveSessionMaxWebVpnUsers OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of WebVPN user sessions allowed."
::= { alStatsSessionGlobal 10 }
alWeightedSessionCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The weighted number of sessions."
::= { alStatsSessionGlobal 11 }
alActiveNacAcceptedSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of currently active
Access-Accepted NAC sessions."
::= { alStatsSessionGlobal 12 }
alTotalNacAcceptedSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Access-Accepted NAC
sessions since the device booted."
::= { alStatsSessionGlobal 13 }
alActiveNacRejectedSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of currently active
Access-Rejected NAC sessions."
::= { alStatsSessionGlobal 14 }
alTotalNacRejectedSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Access-Rejected NAC
sessions since the device booted."
::= { alStatsSessionGlobal 15 }
alActiveNacExemptedSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of currently active PV exempt NAC sessions."
::= { alStatsSessionGlobal 16 }
alTotalNacExemptedSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PV exempt NAC sessions since the device booted."
::= { alStatsSessionGlobal 17 }
alActiveNacNonresponsiveSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of currently active
non-responsive NAC sessions."
::= { alStatsSessionGlobal 18 }
alTotalNacNonresponsiveSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of non-responsive NAC
sessions since the device booted."
::= { alStatsSessionGlobal 19 }
alActiveNacDisabledSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of currently active
sessions not subjected to NAC."
::= { alStatsSessionGlobal 20 }
alTotalNacDisabledSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sessions not subjected
to NAC since the device booted."
::= { alStatsSessionGlobal 21 }
alActiveNacHoldoffSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sessions currently in
Hold-off state."
::= { alStatsSessionGlobal 22 }
alTotalNacHoldoffSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of sessions placed in Hold-off
state since the device booted."
::= { alStatsSessionGlobal 23 }
alActiveSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlActiveSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of active sessions."
::= { alStatsSession 2 }
alActiveSessionEntry OBJECT-TYPE
SYNTAX AlActiveSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alActiveSessionTable."
INDEX { alActiveSessionIndex }
::= { alActiveSessionTable 1 }
AlActiveSessionEntry ::= SEQUENCE {
alActiveSessionRowStatus RowStatus,
alActiveSessionIndex Integer32,
alActiveSessionUserName DisplayString,
alActiveSessionIpAddress IpAddress,
alActiveSessionProtocol SessionProtocol,
alActiveSessionEncrType EncryptionAlgorithm,
alActiveSessionStartTime TimeTicks,
alActiveSessionConnectTime Unsigned32,
alActiveSessionOctetsSent Counter32,
alActiveSessionOctetsRcvd Counter32,
alActiveSessionSepId Integer32,
alActiveSessionGroupName DisplayString,
alActiveSessionGroupId Integer32,
alActiveSessionPublicIpAddress IpAddress,
alActiveSessionTopTenData Gauge32,
alActiveSessionLoginTime Unsigned32,
alActiveSessionOS DisplayString,
alActiveSessionVersion DisplayString,
alActiveSessionFilterId Integer32,
alActiveSessionNacResult NacResult
}
alActiveSessionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row. Used to terminate the session,
cannot be used to create a session."
::= { alActiveSessionEntry 1 }
alActiveSessionIndex OBJECT-TYPE
SYNTAX Integer32(1..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of this session."
::= { alActiveSessionEntry 2 }
alActiveSessionUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The username used to authenticate this session."
::= { alActiveSessionEntry 3 }
alActiveSessionIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer IP address of this session. For a Remote Access
session, this is the assigned IP address. For LAN-to-LAN,
this is the peer VPN device. For management, this is the
IP address of the management machine."
::= { alActiveSessionEntry 4 }
alActiveSessionProtocol OBJECT-TYPE
SYNTAX SessionProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol used for this session."
::= { alActiveSessionEntry 5 }
alActiveSessionEncrType OBJECT-TYPE
SYNTAX EncryptionAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encryption algorithm used on this session."
::= { alActiveSessionEntry 6 }
alActiveSessionStartTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this session was established."
::= { alActiveSessionEntry 7 }
alActiveSessionConnectTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of time, in seconds that this session has
been established."
::= { alActiveSessionEntry 8 }
alActiveSessionOctetsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted over this session."
::= { alActiveSessionEntry 9 }
alActiveSessionOctetsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on this session."
::= { alActiveSessionEntry 10 }
alActiveSessionSepId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SEP module assigned to this session."
::= { alActiveSessionEntry 11 }
alActiveSessionGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The groupname used to establish this session."
::= { alActiveSessionEntry 12 }
alActiveSessionGroupId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group id assigned to this session."
::= { alActiveSessionEntry 13 }
alActiveSessionPublicIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The public peer IP address of this Remote Access session.
Not used for administrative or LAN-to-LAN sessions."
::= { alActiveSessionEntry 14 }
alActiveSessionTopTenData OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Placeholder for the data used to sort the top ten lists."
::= { alActiveSessionEntry 15 }
alActiveSessionLoginTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"time_t value of the concentrator when the session started."
::= { alActiveSessionEntry 16 }
alActiveSessionOS OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User operating system type."
::= { alActiveSessionEntry 17 }
alActiveSessionVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User application version."
::= { alActiveSessionEntry 18 }
alActiveSessionFilterId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Filter ID applied to the user Session."
::= { alActiveSessionEntry 19 }
alActiveSessionNacResult OBJECT-TYPE
SYNTAX NacResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NAC result for the remote access IPsec session
for which the SessionProtocol is ipsec, l2tpOverIpsec,
ipsecOverUdp, ipsecOverTcp, ipsecOverNatT or l2tpOverIpsecOverNatT."
::= { alActiveSessionEntry 20 }
alActiveSessionThroughputTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlActiveSessionThroughputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Top ten list of throughput users."
::= { alStatsSession 3 }
alActiveSessionThroughputEntry OBJECT-TYPE
SYNTAX AlActiveSessionThroughputEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alActiveSessionThroughputTable."
INDEX { alActiveSessionThroughputIndex }
::= { alActiveSessionThroughputTable 1 }
AlActiveSessionThroughputEntry ::= SEQUENCE {
alActiveSessionThroughputRowStatus RowStatus,
alActiveSessionThroughputIndex Integer32,
alActiveSessionThroughputUserName DisplayString,
alActiveSessionThroughputIpAddress IpAddress,
alActiveSessionThroughputProtocol SessionProtocol,
alActiveSessionThroughputEncrType EncryptionAlgorithm,
alActiveSessionThroughputStartTime TimeTicks,
alActiveSessionThroughputConnectTime Counter32,
alActiveSessionThroughputOctetsSent Counter32,
alActiveSessionThroughputOctetsRcvd Counter32,
alActiveSessionThroughputSepId Integer32,
alActiveSessionThroughputGroupName DisplayString,
alActiveSessionThroughputGroupId Integer32,
alActiveSessionThroughputPublicIpAddress IpAddress,
alActiveSessionThroughputTopTenData Gauge32,
alActiveSessionThroughputLoginTime Unsigned32
}
alActiveSessionThroughputRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this row."
::= { alActiveSessionThroughputEntry 1 }
alActiveSessionThroughputIndex OBJECT-TYPE
SYNTAX Integer32(1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of this session."
::= { alActiveSessionThroughputEntry 2 }
alActiveSessionThroughputUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The username used to authenticate this session."
::= { alActiveSessionThroughputEntry 3 }
alActiveSessionThroughputIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer IP address of this session."
::= { alActiveSessionThroughputEntry 4 }
alActiveSessionThroughputProtocol OBJECT-TYPE
SYNTAX SessionProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol used for this session."
::= { alActiveSessionThroughputEntry 5 }
alActiveSessionThroughputEncrType OBJECT-TYPE
SYNTAX EncryptionAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encryption algorithm used on this session."
::= { alActiveSessionThroughputEntry 6 }
alActiveSessionThroughputStartTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this session was established."
::= { alActiveSessionThroughputEntry 7 }
alActiveSessionThroughputConnectTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of time, in seconds that this session has
been established."
::= { alActiveSessionThroughputEntry 8 }
alActiveSessionThroughputOctetsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted over this session."
::= { alActiveSessionThroughputEntry 9 }
alActiveSessionThroughputOctetsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on this session."
::= { alActiveSessionThroughputEntry 10 }
alActiveSessionThroughputSepId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SEP module assigned to this session."
::= { alActiveSessionThroughputEntry 11 }
alActiveSessionThroughputGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The groupname used to establish this session."
::= { alActiveSessionThroughputEntry 12 }
alActiveSessionThroughputGroupId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group id assigned to this session."
::= { alActiveSessionThroughputEntry 13 }
alActiveSessionThroughputPublicIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The public peer IP address of this Remote Access session.
Not used for administrative or LAN-to-LAN sessions."
::= { alActiveSessionThroughputEntry 14 }
alActiveSessionThroughputTopTenData OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Placeholder for the data used to sort the top ten lists."
::= { alActiveSessionThroughputEntry 15 }
alActiveSessionThroughputLoginTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"time_t value of the concentrator when the session started."
::= { alActiveSessionThroughputEntry 16 }
alActiveSessionDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlActiveSessionDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Top ten list of data users."
::= { alStatsSession 4 }
alActiveSessionDataEntry OBJECT-TYPE
SYNTAX AlActiveSessionDataEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alActiveSessionDataTable."
INDEX { alActiveSessionDataIndex }
::= { alActiveSessionDataTable 1 }
AlActiveSessionDataEntry ::= SEQUENCE {
alActiveSessionDataRowStatus RowStatus,
alActiveSessionDataIndex Integer32,
alActiveSessionDataUserName DisplayString,
alActiveSessionDataIpAddress IpAddress,
alActiveSessionDataProtocol SessionProtocol,
alActiveSessionDataEncrType EncryptionAlgorithm,
alActiveSessionDataStartTime TimeTicks,
alActiveSessionDataConnectTime Counter32,
alActiveSessionDataOctetsSent Counter32,
alActiveSessionDataOctetsRcvd Counter32,
alActiveSessionDataSepId Integer32,
alActiveSessionDataGroupName DisplayString,
alActiveSessionDataGroupId Integer32,
alActiveSessionDataPublicIpAddress IpAddress,
alActiveSessionDataTopTenData Gauge32,
alActiveSessionDataLoginTime Unsigned32
}
alActiveSessionDataRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this row."
::= { alActiveSessionDataEntry 1 }
alActiveSessionDataIndex OBJECT-TYPE
SYNTAX Integer32(1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of this session."
::= { alActiveSessionDataEntry 2 }
alActiveSessionDataUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The username used to authenticate this session."
::= { alActiveSessionDataEntry 3 }
alActiveSessionDataIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer IP address of this session."
::= { alActiveSessionDataEntry 4 }
alActiveSessionDataProtocol OBJECT-TYPE
SYNTAX SessionProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol used for this session."
::= { alActiveSessionDataEntry 5 }
alActiveSessionDataEncrType OBJECT-TYPE
SYNTAX EncryptionAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encryption algorithm used on this session."
::= { alActiveSessionDataEntry 6 }
alActiveSessionDataStartTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this session was established."
::= { alActiveSessionDataEntry 7 }
alActiveSessionDataConnectTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of time, in seconds that this session has
been established."
::= { alActiveSessionDataEntry 8 }
alActiveSessionDataOctetsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted over this session."
::= { alActiveSessionDataEntry 9 }
alActiveSessionDataOctetsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on this session."
::= { alActiveSessionDataEntry 10 }
alActiveSessionDataSepId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SEP module assigned to this session."
::= { alActiveSessionDataEntry 11 }
alActiveSessionDataGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The groupname used to establish this session."
::= { alActiveSessionDataEntry 12 }
alActiveSessionDataGroupId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group id assigned to this session."
::= { alActiveSessionDataEntry 13 }
alActiveSessionDataPublicIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The public peer IP address of this Remote Access session.
Not used for administrative or LAN-to-LAN sessions."
::= { alActiveSessionDataEntry 14 }
alActiveSessionDataTopTenData OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Placeholder for the data used to sort the top ten lists."
::= { alActiveSessionDataEntry 15 }
alActiveSessionDataLoginTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"time_t value of the concentrator when the session started."
::= { alActiveSessionDataEntry 16 }
alActiveSessionDurationTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlActiveSessionDurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Top ten list of Duration users."
::= { alStatsSession 5 }
alActiveSessionDurationEntry OBJECT-TYPE
SYNTAX AlActiveSessionDurationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alActiveSessionDurationTable."
INDEX { alActiveSessionDurationIndex }
::= { alActiveSessionDurationTable 1 }
AlActiveSessionDurationEntry ::= SEQUENCE {
alActiveSessionDurationRowStatus RowStatus,
alActiveSessionDurationIndex Integer32,
alActiveSessionDurationUserName DisplayString,
alActiveSessionDurationIpAddress IpAddress,
alActiveSessionDurationProtocol SessionProtocol,
alActiveSessionDurationEncrType EncryptionAlgorithm,
alActiveSessionDurationStartTime TimeTicks,
alActiveSessionDurationConnectTime Counter32,
alActiveSessionDurationOctetsSent Counter32,
alActiveSessionDurationOctetsRcvd Counter32,
alActiveSessionDurationSepId Integer32,
alActiveSessionDurationGroupName DisplayString,
alActiveSessionDurationGroupId Integer32,
alActiveSessionDurationPublicIpAddress IpAddress,
alActiveSessionDurationTopTenData Gauge32,
alActiveSessionDurationLoginTime Unsigned32
}
alActiveSessionDurationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this row."
::= { alActiveSessionDurationEntry 1 }
alActiveSessionDurationIndex OBJECT-TYPE
SYNTAX Integer32(1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of this session."
::= { alActiveSessionDurationEntry 2 }
alActiveSessionDurationUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The username used to authenticate this session."
::= { alActiveSessionDurationEntry 3 }
alActiveSessionDurationIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer IP address of this session."
::= { alActiveSessionDurationEntry 4 }
alActiveSessionDurationProtocol OBJECT-TYPE
SYNTAX SessionProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol used for this session."
::= { alActiveSessionDurationEntry 5 }
alActiveSessionDurationEncrType OBJECT-TYPE
SYNTAX EncryptionAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encryption algorithm used on this session."
::= { alActiveSessionDurationEntry 6 }
alActiveSessionDurationStartTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when this session was established."
::= { alActiveSessionDurationEntry 7 }
alActiveSessionDurationConnectTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of time, in seconds that this session has
been established."
::= { alActiveSessionDurationEntry 8 }
alActiveSessionDurationOctetsSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted over this session."
::= { alActiveSessionDurationEntry 9 }
alActiveSessionDurationOctetsRcvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received on this session."
::= { alActiveSessionDurationEntry 10 }
alActiveSessionDurationSepId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SEP module assigned to this session."
::= { alActiveSessionDurationEntry 11 }
alActiveSessionDurationGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The groupname used to establish this session."
::= { alActiveSessionDurationEntry 12 }
alActiveSessionDurationGroupId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The group id assigned to this session."
::= { alActiveSessionDurationEntry 13 }
alActiveSessionDurationPublicIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The public peer IP address of this Remote Access session.
Not used for administrative or LAN-to-LAN sessions."
::= { alActiveSessionDurationEntry 14 }
alActiveSessionDurationTopTenData OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Placeholder for the data used to sort the top ten lists."
::= { alActiveSessionDurationEntry 15 }
alActiveSessionDurationLoginTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"time_t value of the concentrator when the session started."
::= { alActiveSessionDurationEntry 16 }
alActiveSessionSubTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlActiveSessionSubEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of active session sub entries."
::= { alStatsSession 6 }
alActiveSessionSubEntry OBJECT-TYPE
SYNTAX AlActiveSessionSubEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alActiveSessionDurationTable."
INDEX { alActiveSessionSubEntryIndex, alActiveSessionSubEntryInstance }
::= { alActiveSessionSubTable 1 }
AlActiveSessionSubEntry ::= SEQUENCE {
alActiveSessionSubEntryRowStatus RowStatus,
alActiveSessionSubEntryIndex Integer32,
alActiveSessionSubEntryInstance Integer32,
alActiveSessionSubEntryProtocol SessionProtocol,
alActiveSessionSubEntryEncrAlg EncryptionAlgorithm,
alActiveSessionSubEntryHashAlg INTEGER,
alActiveSessionSubEntryDiffHelmanGrp INTEGER,
alActiveSessionSubEntryAuthMode INTEGER,
alActiveSessionSubEntryEncapMode INTEGER,
alActiveSessionSubEntryRekeyTime Unsigned32,
alActiveSessionSubEntryRekeyKBytes Unsigned32,
alActiveSessionSubEntryRemAddrType INTEGER,
alActiveSessionSubEntryRemAddr1 IpAddress,
alActiveSessionSubEntryRemAddr2 IpAddress,
alActiveSessionSubEntryLocAddrType INTEGER,
alActiveSessionSubEntryLocAddr1 IpAddress,
alActiveSessionSubEntryLocAddr2 IpAddress,
alActiveSessionSubEntryRcvdOctets Counter32,
alActiveSessionSubEntrySentOctets Counter32,
alActiveSessionSubEntrySep Integer32,
alActiveSessionSubEntryUserName DisplayString,
alActiveSessionSubEntryClientIpAddr IpAddress,
alActiveSessionSubEntryUdpPort Integer32,
alActiveSessionSubEntryTotalIdleTime Counter32,
alActiveSessionSubEntryIkeNegMode INTEGER,
alActiveSessionSubEntryCompression CompressionAlgorithm,
alActiveSessionSubEntryInstId Integer32,
alActiveSessionSubEntryPfsGroup INTEGER,
alActiveSessionSubEntryTcpSrcPort Integer32,
alActiveSessionSubEntryTcpDstPort Integer32,
alActiveSessionSubEntryUdpSrcPort Integer32,
alActiveSessionSubEntryIkeUdpSrcPort Integer32,
alActiveSessionSubEntryIkeUdpDstPort Integer32,
alActiveSessionSubEntryNacRevalTimer Integer32,
alActiveSessionSubEntryNacTimetoReval Integer32,
alActiveSessionSubEntryNacSqTimer Integer32,
alActiveSessionSubEntryNacSessionAge Integer32,
alActiveSessionSubEntryNacPosture DisplayString,
alActiveSessionSubEntryNacRedirectUrl DisplayString,
alActiveSessionSubEntryNacHoldTimer Integer32
}
alActiveSessionSubEntryRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this row."
::= { alActiveSessionSubEntry 1 }
alActiveSessionSubEntryIndex OBJECT-TYPE
SYNTAX Integer32(1..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index to the session of this session sub-entry."
::= { alActiveSessionSubEntry 2 }
alActiveSessionSubEntryInstance OBJECT-TYPE
SYNTAX Integer32(1..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Instance of this session sub-entry."
::= { alActiveSessionSubEntry 3 }
alActiveSessionSubEntryProtocol OBJECT-TYPE
SYNTAX SessionProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol used for this session."
::= { alActiveSessionSubEntry 4 }
alActiveSessionSubEntryEncrAlg OBJECT-TYPE
SYNTAX EncryptionAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encryption algorithm used on this session sub-entry."
::= { alActiveSessionSubEntry 5 }
alActiveSessionSubEntryHashAlg OBJECT-TYPE
SYNTAX INTEGER {
none(0),
md5(1),
sha1(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Hashing algorithm used on this session sub-entry."
::= { alActiveSessionSubEntry 6 }
alActiveSessionSubEntryDiffHelmanGrp OBJECT-TYPE
SYNTAX INTEGER {
none(0),
group1(1),
group2(2),
group3(3),
group4(4),
group5(5),
group7(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Diffie Helman Group used on this session sub-entry.
rsaCertHybrid - RSA Cert Hybrid
dsaCertHybrid - DSA Cert Hybrid
crack - Challenge/Resp Auth
"
::= { alActiveSessionSubEntry 7 }
alActiveSessionSubEntryAuthMode OBJECT-TYPE
SYNTAX INTEGER {
none(0),
preSharedKeys(1),
rsaCert(2),
dsaCert(3),
pap(4),
chap(5),
eapMd5(6),
eapGtc(7),
msChapV1(8),
msChapV2(9),
preSharedKeysXauth(10),
rsaCertXauth(11),
dsaCertXauth(12),
eap(13),
usernamePassword(14),
rsaCertHybrid(15),
dsaCertHybrid(16),
crack(17)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Authentication Mode used on this session sub-entry"
::= { alActiveSessionSubEntry 8 }
alActiveSessionSubEntryEncapMode OBJECT-TYPE
SYNTAX INTEGER {
none(0),
transport(1),
tunnel(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Encapsulation Mode used on this session sub-entry."
::= { alActiveSessionSubEntry 9 }
alActiveSessionSubEntryRekeyTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Rekey time interval for this session sub-entry."
::= { alActiveSessionSubEntry 10 }
alActiveSessionSubEntryRekeyKBytes OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of kilobytes."
::= { alActiveSessionSubEntry 11 }
alActiveSessionSubEntryRemAddrType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
addrWithSubNet(1),
range(2),
hostAddress(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Address or Address Range for this session sub-entry."
::= { alActiveSessionSubEntry 12 }
alActiveSessionSubEntryRemAddr1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ip address or start address for this session sub-entry."
::= { alActiveSessionSubEntry 13 }
alActiveSessionSubEntryRemAddr2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Subnet or end address for this session sub-entry."
::= { alActiveSessionSubEntry 14 }
alActiveSessionSubEntryLocAddrType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
addrWithSubNet(1),
range(2),
hostAddress(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Address or Address Range for this session sub-entry."
::= { alActiveSessionSubEntry 15 }
alActiveSessionSubEntryLocAddr1 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ip address or start address for this session sub-entry."
::= { alActiveSessionSubEntry 16 }
alActiveSessionSubEntryLocAddr2 OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Subnet or end address for this session sub-entry."
::= { alActiveSessionSubEntry 17 }
alActiveSessionSubEntryRcvdOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received for this session sub-entry."
::= { alActiveSessionSubEntry 18 }
alActiveSessionSubEntrySentOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets sent for this session sub-entry."
::= { alActiveSessionSubEntry 19 }
alActiveSessionSubEntrySep OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SEP used for thios session sub-entry."
::= { alActiveSessionSubEntry 20 }
alActiveSessionSubEntryUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The username used to authenticate this session sub entry."
::= { alActiveSessionSubEntry 21 }
alActiveSessionSubEntryClientIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote client assigned IP address for this session sub-entry."
::= { alActiveSessionSubEntry 22 }
alActiveSessionSubEntryUdpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UDP destination port used by IPSec for this connection to permit access
through a firewall."
::= { alActiveSessionSubEntry 23 }
alActiveSessionSubEntryTotalIdleTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of time, in seconds that this session has
been idle."
::= { alActiveSessionSubEntry 24 }
alActiveSessionSubEntryIkeNegMode OBJECT-TYPE
SYNTAX INTEGER {
none(0),
main(1),
aggressive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IKE Negotiation mode used on this session sub-entry."
::= { alActiveSessionSubEntry 25 }
alActiveSessionSubEntryCompression OBJECT-TYPE
SYNTAX CompressionAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IKE Negotiation mode used on this session sub-entry."
::= { alActiveSessionSubEntry 26 }
alActiveSessionSubEntryInstId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Instance Identifier allocated by RM for this session
sub-entry."
::= {alActiveSessionSubEntry 27 }
alActiveSessionSubEntryPfsGroup OBJECT-TYPE
SYNTAX INTEGER {
none(0),
group1(1),
group2(2),
group3(3),
group4(4),
group7(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Perfect Forward Secrecy Group used on this session sub-entry."
::= { alActiveSessionSubEntry 28 }
alActiveSessionSubEntryTcpSrcPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP Source port used by IKE/IPSec for this connection to permit access
through a firewall."
::= { alActiveSessionSubEntry 29 }
alActiveSessionSubEntryTcpDstPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The TCP Dest port used by IKE/IPSec for this connection to permit access
through a firewall."
::= { alActiveSessionSubEntry 30 }
alActiveSessionSubEntryUdpSrcPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UDP Source port used by IPSec for this connection to permit access
through a firewall."
::= { alActiveSessionSubEntry 31 }
alActiveSessionSubEntryIkeUdpSrcPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UDP Source port used by IPSec/UDP for IKE Session."
::= { alActiveSessionSubEntry 32 }
alActiveSessionSubEntryIkeUdpDstPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UDP Source port used by IPSec/UDP for IKE Session."
::= { alActiveSessionSubEntry 33 }
alActiveSessionSubEntryNacRevalTimer OBJECT-TYPE
SYNTAX Integer32(0..86400)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"NAC Re-validation Timer. Periodic interval after IPsec
session establishment and initial posture validation, at
which the host is subject to a full posture validation."
::= { alActiveSessionSubEntry 34 }
alActiveSessionSubEntryNacTimetoReval OBJECT-TYPE
SYNTAX Integer32(0..86400)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time after which the NAC session will be re-validated. This
is the number of seconds before the NAC Revalidation Timer
expires."
::= { alActiveSessionSubEntry 35 }
alActiveSessionSubEntryNacSqTimer OBJECT-TYPE
SYNTAX Integer32(0..1800)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"NAC Status Query Timer. Periodic interval after IPsec
session establishment and initial posture validation, at
which the host is queried for changes in its posture."
::= { alActiveSessionSubEntry 36 }
alActiveSessionSubEntryNacSessionAge OBJECT-TYPE
SYNTAX Integer32(0..86400)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"NAC EAPoUDP session age. The total time in seconds for
which the EAPoUDP association exists."
::= { alActiveSessionSubEntry 37 }
alActiveSessionSubEntryNacPosture OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Posture-token for the NAC session."
::= { alActiveSessionSubEntry 38 }
alActiveSessionSubEntryNacRedirectUrl OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Re-direct URL for the NAC session."
::= { alActiveSessionSubEntry 39}
alActiveSessionSubEntryNacHoldTimer OBJECT-TYPE
SYNTAX Integer32(0..86400)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time after which the NAC PV will be retried."
::= { alActiveSessionSubEntry 40 }
alActiveHWClientUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlActiveHWClientUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of active hardware client sessions"
::= { alStatsSession 7 }
alActiveHWClientUserEntry OBJECT-TYPE
SYNTAX AlActiveHWClientUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alActiveSessionTable."
INDEX { alActiveHWClientUserSessionIndex, alActiveHWClientUserIpAddr }
::= { alActiveHWClientUserTable 1 }
AlActiveHWClientUserEntry ::= SEQUENCE {
alActiveHWClientUserRowStatus RowStatus,
alActiveHWClientUserSessionIndex Integer32,
alActiveHWClientUserIpAddr IpAddress,
alActiveHWClientUserName DisplayString,
alActiveHWClientUserMacAddr MacAddress,
alActiveHWClientUserLoginTime Unsigned32,
alActiveHWClientUserUpTime TimeTicks
}
alActiveHWClientUserRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row. Used to terminate the HW Client
user session, cannot be used to create a session."
::= { alActiveHWClientUserEntry 1 }
alActiveHWClientUserSessionIndex OBJECT-TYPE
SYNTAX Integer32(1..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of this HW Client User session."
::= { alActiveHWClientUserEntry 2 }
alActiveHWClientUserIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of this HW Client user."
::= { alActiveHWClientUserEntry 3 }
alActiveHWClientUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The username used to authenticate this HW Client user session."
::= { alActiveHWClientUserEntry 4 }
alActiveHWClientUserMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address for a HW Client User session."
::= { alActiveHWClientUserEntry 5 }
alActiveHWClientUserLoginTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"time_t value of the concentrator when the session started."
::= { alActiveHWClientUserEntry 6 }
alActiveHWClientUserUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of time, in seconds that this HW Client User
session has been established."
::= { alActiveHWClientUserEntry 7 }
altigaSessionStatsMibConformance OBJECT IDENTIFIER ::= { altigaSessionStatsMibModule 1 }
altigaSessionStatsMibCompliances OBJECT IDENTIFIER ::= { altigaSessionStatsMibConformance 1 }
altigaSessionStatsMibCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for agents which
implement the Altiga Session Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaSessionStatsGroup
}
::= { altigaSessionStatsMibCompliances 1 }
altigaSessionStatsMibComplianceRev1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for agents which
implement the Altiga Session Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaSessionStatsGroupRev1
}
::= { altigaSessionStatsMibCompliances 2 }
altigaSessionStatsMibComplianceRev2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for agents which
implement the Altiga Session Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaSessionStatsGroupRev2
}
::= { altigaSessionStatsMibCompliances 3 }
altigaSessionStatsMibComplianceRev3 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga Session Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaSessionStatsGroupRev2,
altigaSessionStatsGroupRev2Sup1
}
::= { altigaSessionStatsMibCompliances 4 }
altigaSessionStatsGroup OBJECT-GROUP
OBJECTS
{
alActiveSessionCount,
alTotalSessionCount,
alActiveSessionLastUpdate,
alActiveSessionMaxUsers,
alActiveSessionGroupIdLock,
alMaxSessionCount,
alActiveLanToLanSessionCount,
alActiveManagementSessionCount,
alActiveRemoteAccessSessionCount,
alActiveSessionRowStatus,
alActiveSessionIndex,
alActiveSessionUserName,
alActiveSessionIpAddress,
alActiveSessionProtocol,
alActiveSessionEncrType,
alActiveSessionStartTime,
alActiveSessionConnectTime,
alActiveSessionOctetsSent,
alActiveSessionOctetsRcvd,
alActiveSessionSepId,
alActiveSessionGroupName,
alActiveSessionGroupId,
alActiveSessionPublicIpAddress,
alActiveSessionTopTenData,
alActiveSessionLoginTime,
alActiveSessionOS,
alActiveSessionVersion,
alActiveSessionThroughputRowStatus,
alActiveSessionThroughputIndex,
alActiveSessionThroughputUserName,
alActiveSessionThroughputIpAddress,
alActiveSessionThroughputProtocol,
alActiveSessionThroughputEncrType,
alActiveSessionThroughputStartTime,
alActiveSessionThroughputConnectTime,
alActiveSessionThroughputOctetsSent,
alActiveSessionThroughputOctetsRcvd,
alActiveSessionThroughputSepId,
alActiveSessionThroughputGroupName,
alActiveSessionThroughputGroupId,
alActiveSessionThroughputPublicIpAddress,
alActiveSessionThroughputTopTenData,
alActiveSessionThroughputLoginTime,
alActiveSessionDataRowStatus,
alActiveSessionDataIndex,
alActiveSessionDataUserName,
alActiveSessionDataIpAddress,
alActiveSessionDataProtocol,
alActiveSessionDataEncrType,
alActiveSessionDataStartTime,
alActiveSessionDataConnectTime,
alActiveSessionDataOctetsSent,
alActiveSessionDataOctetsRcvd,
alActiveSessionDataSepId,
alActiveSessionDataGroupName,
alActiveSessionDataGroupId,
alActiveSessionDataPublicIpAddress,
alActiveSessionDataTopTenData,
alActiveSessionDataLoginTime,
alActiveSessionDurationRowStatus,
alActiveSessionDurationIndex,
alActiveSessionDurationUserName,
alActiveSessionDurationIpAddress,
alActiveSessionDurationProtocol,
alActiveSessionDurationEncrType,
alActiveSessionDurationStartTime,
alActiveSessionDurationConnectTime,
alActiveSessionDurationOctetsSent,
alActiveSessionDurationOctetsRcvd,
alActiveSessionDurationSepId,
alActiveSessionDurationGroupName,
alActiveSessionDurationGroupId,
alActiveSessionDurationPublicIpAddress,
alActiveSessionDurationTopTenData,
alActiveSessionDurationLoginTime,
alActiveSessionSubEntryRowStatus,
alActiveSessionSubEntryIndex,
alActiveSessionSubEntryInstance,
alActiveSessionSubEntryProtocol,
alActiveSessionSubEntryEncrAlg,
alActiveSessionSubEntryHashAlg,
alActiveSessionSubEntryDiffHelmanGrp,
alActiveSessionSubEntryAuthMode,
alActiveSessionSubEntryEncapMode,
alActiveSessionSubEntryRekeyTime,
alActiveSessionSubEntryRekeyKBytes,
alActiveSessionSubEntryRemAddrType,
alActiveSessionSubEntryRemAddr1,
alActiveSessionSubEntryRemAddr2,
alActiveSessionSubEntryLocAddrType,
alActiveSessionSubEntryLocAddr1,
alActiveSessionSubEntryLocAddr2,
alActiveSessionSubEntryRcvdOctets,
alActiveSessionSubEntrySentOctets,
alActiveSessionSubEntrySep,
alActiveSessionSubEntryUserName,
alActiveSessionSubEntryClientIpAddr,
alActiveSessionSubEntryUdpPort,
alActiveSessionSubEntryTotalIdleTime,
alActiveSessionSubEntryIkeNegMode,
alActiveSessionSubEntryCompression,
alActiveSessionSubEntryInstId,
alActiveSessionSubEntryPfsGroup,
alActiveSessionSubEntryTcpSrcPort,
alActiveSessionSubEntryTcpDstPort,
alActiveSessionSubEntryUdpSrcPort,
alActiveSessionSubEntryIkeUdpSrcPort,
alActiveSessionSubEntryIkeUdpDstPort,
alActiveHWClientUserRowStatus,
alActiveHWClientUserSessionIndex,
alActiveHWClientUserName,
alActiveHWClientUserIpAddr,
alActiveHWClientUserMacAddr,
alActiveHWClientUserLoginTime,
alActiveHWClientUserUpTime
}
STATUS deprecated
DESCRIPTION
"The objects for Session statistics."
::= { alSessionGroup 2 }
altigaSessionStatsGroupRev1 OBJECT-GROUP
OBJECTS
{
alActiveSessionCount,
alTotalSessionCount,
alActiveSessionLastUpdate,
alActiveSessionMaxUsers,
alActiveSessionGroupIdLock,
alMaxSessionCount,
alActiveLanToLanSessionCount,
alActiveManagementSessionCount,
alActiveRemoteAccessSessionCount,
alActiveSessionRowStatus,
alActiveSessionIndex,
alActiveSessionUserName,
alActiveSessionIpAddress,
alActiveSessionProtocol,
alActiveSessionEncrType,
alActiveSessionStartTime,
alActiveSessionConnectTime,
alActiveSessionOctetsSent,
alActiveSessionOctetsRcvd,
alActiveSessionSepId,
alActiveSessionGroupName,
alActiveSessionGroupId,
alActiveSessionPublicIpAddress,
alActiveSessionTopTenData,
alActiveSessionLoginTime,
alActiveSessionOS,
alActiveSessionVersion,
alActiveSessionFilterId,
alActiveSessionThroughputRowStatus,
alActiveSessionThroughputIndex,
alActiveSessionThroughputUserName,
alActiveSessionThroughputIpAddress,
alActiveSessionThroughputProtocol,
alActiveSessionThroughputEncrType,
alActiveSessionThroughputStartTime,
alActiveSessionThroughputConnectTime,
alActiveSessionThroughputOctetsSent,
alActiveSessionThroughputOctetsRcvd,
alActiveSessionThroughputSepId,
alActiveSessionThroughputGroupName,
alActiveSessionThroughputGroupId,
alActiveSessionThroughputPublicIpAddress,
alActiveSessionThroughputTopTenData,
alActiveSessionThroughputLoginTime,
alActiveSessionDataRowStatus,
alActiveSessionDataIndex,
alActiveSessionDataUserName,
alActiveSessionDataIpAddress,
alActiveSessionDataProtocol,
alActiveSessionDataEncrType,
alActiveSessionDataStartTime,
alActiveSessionDataConnectTime,
alActiveSessionDataOctetsSent,
alActiveSessionDataOctetsRcvd,
alActiveSessionDataSepId,
alActiveSessionDataGroupName,
alActiveSessionDataGroupId,
alActiveSessionDataPublicIpAddress,
alActiveSessionDataTopTenData,
alActiveSessionDataLoginTime,
alActiveSessionDurationRowStatus,
alActiveSessionDurationIndex,
alActiveSessionDurationUserName,
alActiveSessionDurationIpAddress,
alActiveSessionDurationProtocol,
alActiveSessionDurationEncrType,
alActiveSessionDurationStartTime,
alActiveSessionDurationConnectTime,
alActiveSessionDurationOctetsSent,
alActiveSessionDurationOctetsRcvd,
alActiveSessionDurationSepId,
alActiveSessionDurationGroupName,
alActiveSessionDurationGroupId,
alActiveSessionDurationPublicIpAddress,
alActiveSessionDurationTopTenData,
alActiveSessionDurationLoginTime,
alActiveSessionSubEntryRowStatus,
alActiveSessionSubEntryIndex,
alActiveSessionSubEntryInstance,
alActiveSessionSubEntryProtocol,
alActiveSessionSubEntryEncrAlg,
alActiveSessionSubEntryHashAlg,
alActiveSessionSubEntryDiffHelmanGrp,
alActiveSessionSubEntryAuthMode,
alActiveSessionSubEntryEncapMode,
alActiveSessionSubEntryRekeyTime,
alActiveSessionSubEntryRekeyKBytes,
alActiveSessionSubEntryRemAddrType,
alActiveSessionSubEntryRemAddr1,
alActiveSessionSubEntryRemAddr2,
alActiveSessionSubEntryLocAddrType,
alActiveSessionSubEntryLocAddr1,
alActiveSessionSubEntryLocAddr2,
alActiveSessionSubEntryRcvdOctets,
alActiveSessionSubEntrySentOctets,
alActiveSessionSubEntrySep,
alActiveSessionSubEntryUserName,
alActiveSessionSubEntryClientIpAddr,
alActiveSessionSubEntryUdpPort,
alActiveSessionSubEntryTotalIdleTime,
alActiveSessionSubEntryIkeNegMode,
alActiveSessionSubEntryCompression,
alActiveSessionSubEntryInstId,
alActiveSessionSubEntryPfsGroup,
alActiveSessionSubEntryTcpSrcPort,
alActiveSessionSubEntryTcpDstPort,
alActiveSessionSubEntryUdpSrcPort,
alActiveSessionSubEntryIkeUdpSrcPort,
alActiveSessionSubEntryIkeUdpDstPort,
alActiveHWClientUserRowStatus,
alActiveHWClientUserSessionIndex,
alActiveHWClientUserName,
alActiveHWClientUserIpAddr,
alActiveHWClientUserMacAddr,
alActiveHWClientUserLoginTime,
alActiveHWClientUserUpTime
}
STATUS deprecated
DESCRIPTION
"The objects for Session statistics."
::= { alSessionGroup 3 }
altigaSessionStatsGroupRev2 OBJECT-GROUP
OBJECTS
{
alActiveSessionCount,
alTotalSessionCount,
alActiveSessionLastUpdate,
alActiveSessionMaxUsers,
alActiveSessionGroupIdLock,
alMaxSessionCount,
alActiveLanToLanSessionCount,
alActiveManagementSessionCount,
alActiveRemoteAccessSessionCount,
alActiveSessionRowStatus,
alActiveSessionIndex,
alActiveSessionUserName,
alActiveSessionIpAddress,
alActiveSessionProtocol,
alActiveSessionEncrType,
alActiveSessionStartTime,
alActiveSessionConnectTime,
alActiveSessionOctetsSent,
alActiveSessionOctetsRcvd,
alActiveSessionSepId,
alActiveSessionGroupName,
alActiveSessionGroupId,
alActiveSessionPublicIpAddress,
alActiveSessionTopTenData,
alActiveSessionLoginTime,
alActiveSessionOS,
alActiveSessionVersion,
alActiveSessionFilterId,
alActiveSessionThroughputRowStatus,
alActiveSessionThroughputIndex,
alActiveSessionThroughputUserName,
alActiveSessionThroughputIpAddress,
alActiveSessionThroughputProtocol,
alActiveSessionThroughputEncrType,
alActiveSessionThroughputStartTime,
alActiveSessionThroughputConnectTime,
alActiveSessionThroughputOctetsSent,
alActiveSessionThroughputOctetsRcvd,
alActiveSessionThroughputSepId,
alActiveSessionThroughputGroupName,
alActiveSessionThroughputGroupId,
alActiveSessionThroughputPublicIpAddress,
alActiveSessionThroughputTopTenData,
alActiveSessionThroughputLoginTime,
alActiveSessionDataRowStatus,
alActiveSessionDataIndex,
alActiveSessionDataUserName,
alActiveSessionDataIpAddress,
alActiveSessionDataProtocol,
alActiveSessionDataEncrType,
alActiveSessionDataStartTime,
alActiveSessionDataConnectTime,
alActiveSessionDataOctetsSent,
alActiveSessionDataOctetsRcvd,
alActiveSessionDataSepId,
alActiveSessionDataGroupName,
alActiveSessionDataGroupId,
alActiveSessionDataPublicIpAddress,
alActiveSessionDataTopTenData,
alActiveSessionDataLoginTime,
alActiveSessionDurationRowStatus,
alActiveSessionDurationIndex,
alActiveSessionDurationUserName,
alActiveSessionDurationIpAddress,
alActiveSessionDurationProtocol,
alActiveSessionDurationEncrType,
alActiveSessionDurationStartTime,
alActiveSessionDurationConnectTime,
alActiveSessionDurationOctetsSent,
alActiveSessionDurationOctetsRcvd,
alActiveSessionDurationSepId,
alActiveSessionDurationGroupName,
alActiveSessionDurationGroupId,
alActiveSessionDurationPublicIpAddress,
alActiveSessionDurationTopTenData,
alActiveSessionDurationLoginTime,
alActiveSessionSubEntryRowStatus,
alActiveSessionSubEntryIndex,
alActiveSessionSubEntryInstance,
alActiveSessionSubEntryProtocol,
alActiveSessionSubEntryEncrAlg,
alActiveSessionSubEntryHashAlg,
alActiveSessionSubEntryDiffHelmanGrp,
alActiveSessionSubEntryAuthMode,
alActiveSessionSubEntryEncapMode,
alActiveSessionSubEntryRekeyTime,
alActiveSessionSubEntryRekeyKBytes,
alActiveSessionSubEntryRemAddrType,
alActiveSessionSubEntryRemAddr1,
alActiveSessionSubEntryRemAddr2,
alActiveSessionSubEntryLocAddrType,
alActiveSessionSubEntryLocAddr1,
alActiveSessionSubEntryLocAddr2,
alActiveSessionSubEntryRcvdOctets,
alActiveSessionSubEntrySentOctets,
alActiveSessionSubEntrySep,
alActiveSessionSubEntryUserName,
alActiveSessionSubEntryClientIpAddr,
alActiveSessionSubEntryUdpPort,
alActiveSessionSubEntryTotalIdleTime,
alActiveSessionSubEntryIkeNegMode,
alActiveSessionSubEntryCompression,
alActiveSessionSubEntryInstId,
alActiveSessionSubEntryPfsGroup,
alActiveSessionSubEntryTcpSrcPort,
alActiveSessionSubEntryTcpDstPort,
alActiveSessionSubEntryUdpSrcPort,
alActiveSessionSubEntryIkeUdpSrcPort,
alActiveSessionSubEntryIkeUdpDstPort,
alActiveHWClientUserRowStatus,
alActiveHWClientUserSessionIndex,
alActiveHWClientUserName,
alActiveHWClientUserIpAddr,
alActiveHWClientUserMacAddr,
alActiveHWClientUserLoginTime,
alActiveHWClientUserUpTime,
alActiveSessionMaxWebVpnUsers,
alWeightedSessionCount
}
STATUS current
DESCRIPTION
"The objects for Session statistics."
::= { alSessionGroup 4 }
altigaSessionStatsGroupRev2Sup1 OBJECT-GROUP
OBJECTS
{
alActiveSessionNacResult,
alActiveSessionSubEntryNacRevalTimer,
alActiveSessionSubEntryNacTimetoReval,
alActiveSessionSubEntryNacSqTimer,
alActiveSessionSubEntryNacSessionAge,
alActiveSessionSubEntryNacPosture,
alActiveSessionSubEntryNacRedirectUrl,
alActiveSessionSubEntryNacHoldTimer,
alActiveNacAcceptedSessions,
alTotalNacAcceptedSessions,
alActiveNacRejectedSessions,
alTotalNacRejectedSessions,
alActiveNacExemptedSessions,
alTotalNacExemptedSessions,
alActiveNacNonresponsiveSessions,
alTotalNacNonresponsiveSessions,
alActiveNacDisabledSessions,
alTotalNacDisabledSessions,
alActiveNacHoldoffSessions,
alTotalNacHoldoffSessions
}
STATUS current
DESCRIPTION
"The objects for Session statistics."
::= { alSessionGroup 5 }
END
Reference in New Issue View Git Blame Copy Permalink