librenms-librenms/mibs/RBTWS-AP-TC

RBTWS-AP-TC DEFINITIONS ::= BEGIN

IMPORTS
    Unsigned32, Integer32, MODULE-IDENTITY
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    rbtwsMibs
        FROM RBTWS-ROOT-MIB;

rbtwsApTc MODULE-IDENTITY
    LAST-UPDATED "200607102335Z"
    ORGANIZATION "Enterasys Networks"
    CONTACT-INFO
        "www.enterasys.com"
    DESCRIPTION
        "Textual Conventions used by Enterasys Networks wireless switches.

        AP = Access Point;
        AC = Access Controller (wireless switch),
             the device that runs a SNMP Agent using these TCs.

        Copyright 2006 Enterasys Networks, Inc.
        All rights reserved.
        This SNMP Management Information Base
        Specification (Specification) embodies
        confidential and proprietary intellectual property.

        This Specification is supplied 'AS IS' and Enterasys Networks
        makes no warranty, either express or implied, as to the use,
        operation, condition, or performance of the Specification."

    REVISION "200607100015Z"
    DESCRIPTION "v1.0.1: Disallow illegal RbtwsRadioRate values 1..9
                         while keeping zero (that means unknown rate)"

    REVISION "200603300014Z"
    DESCRIPTION "v1.0: Initial version, for 4.1 release"

    ::= { rbtwsMibs 3 }


RbtwsAccessType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Describes the access type used by client or an AP.
        Value 'ap(1)' indicates access point that is
        directly attached to the switch.
        Value 'dap(2)' indicates distributed access point
        with attachment to the switch through the intermediate
        network.
        Value 'wired(3)' indicates a client that is directly
        attached to the switch (no access point is involved)."
    SYNTAX      INTEGER {
            ap                  (1),
            dap                 (2),
            wired               (3)
        }

RbtwsApAttachType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "Type of AP attachment to AC."
    SYNTAX       INTEGER {
                     directAttach(1),  -- informally known as "AP"
                     networkAttach(2)  -- informally known as "DAP"
                 }

RbtwsApPortOrDapNum ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "AP Port, for directly attached APs, otherwise DAP Number
        (arbitrary number assigned when configuring the DAP on the AC).
        A zero value means unknown."
    SYNTAX       Unsigned32 (0..1000)

RbtwsApState ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "AP State, as seen by the AC."
    SYNTAX       INTEGER {
                     cleared         (1),
                     init            (2),
                     bootStarted     (3),
                     imageDownloaded (4),
                     connectFailed   (5),
                     configuring     (6),
                     configured      (7)
                 }

-- RbtwsApTransition TC used by 'rbtwsApNonOperStatusTrap'
RbtwsApTransition ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "AP state Transition, as seen by the AC."
    SYNTAX       INTEGER {
                     clear            (1),
                     timeout          (2),
                     reset            (3),
                     bootSuccess      (4),
                     startConfiguring (5),
                     connectFail      (6)
                     -- transition to operational state is reported by
                     -- a different trap: 'rbtwsApOperRadioStatusTrap'
                 }

RbtwsApFailDetail ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "Detailed failure codes for some of the transitions
        specified in 'RbtwsApTransition'."
    SYNTAX       INTEGER {
                    -- Detail code values for 'configFailed' transition.
                    -- All 3 below cover 'rbtwsDAPConnectWarningTrap' trap.
                    secureHandshakeFailure  (2),
                    fingerprintRequired     (3),
                    fingerprintMismatch     (4),

                    -- Detail code values for 'timeout' transition.
                    -- Reports the state of the physical AC port
                    -- this AP is attached to.
                    -- For RM, it would cover the information
                    -- given by the standard "Port Link Up/Down" traps.
                    portLinkUp              (11),
                    portLinkDown            (12),

                    failUnknown             (99)
                 }

RbtwsApConnectSecurityType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "Security level of the connection between AP and AC:
        secure(1)   - fingerprint matching;
        insecure(2) - fingerprint not configured,
                      or optional and not matching;
        auto(3)     - Auto-DAP is intrinsically insecure:
                      could not check fingerprint since
                      no specific DAP is configured."
    SYNTAX       INTEGER {
                    secure          (1),
                    insecure        (2),
                    auto            (3)
                 }

RbtwsApServiceAvailability ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "Level of wireless service availability."
    SYNTAX       INTEGER {
                    fullService     (1),
                    -- All radios operational on the AP.
                    noService       (2),
                    -- No radio operational on the AP.
                    degradedService (3)
                    -- One radio down, one radio up.
                 }

RbtwsApBias ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "Bias of AP attachment to this AC.
        Setting an APs bias on an AC switch to high causes the switch
        to be preferred over switches with low bias,
        for booting and managing the AP.
        Bias applies only to AC switches that are indirectly attached
        to the AP through an intermediate Layer 2 or Layer 3 network.
        An AP always attempts to boot on AP port 1 first,
        and if an AC switch is directly attached on AP port 1,
        the AP boots from it regardless of the bias settings."
    SYNTAX       INTEGER {
                     high(1),
                     low(2)
                 }

RbtwsApSerialNum ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "The value is a zero length string if unknown or unavailable.
        Otherwise the value is a serial number, which consists
        of printable ASCII characters between 0x21 (!),
        and 0x7d (}) with no leading, embedded, or trailing space."
    SYNTAX       OCTET STRING (SIZE (0..32))

RbtwsApFingerprint ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "2x:"
    STATUS       current
    DESCRIPTION
        "Represents a RSA key fingerprint (binary value),
        which is the MD5 hash of the public key of the RSA key pair.
        Or a zero length string if not known or unavailable."
    SYNTAX       OCTET STRING (SIZE (0 | 16))

RbtwsRadioNum ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Enumeration for multi-radio APs."
    SYNTAX      INTEGER {
                    radio-1             (1),
                    radio-2             (2),
                    not-applicable      (3)
                }

RbtwsPowerLevel ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The current level of transmit power expressed in dbm."
    SYNTAX      Unsigned32 (1..18)

RbtwsRadioPowerChangeType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Enumerations for why the power level was changed,
        which occurs due to auto-tune operation."
    SYNTAX      INTEGER {
                    dup-pkts-threshold-exceed            (1),
                    retransmit-threshold-exceed          (2),
                    clients-optimal-performance-reached  (3),
                    def-power-threshold-exceed           (4)
                }

RbtwsChannelChangeType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Enumerations for why the channel was changed, which
        occurs due to auto-tune operation"
    SYNTAX      INTEGER {
                    util-index          (1),
                    rexmit-pkt-offset   (2),
                    noise-offset        (3),
                    noise               (4),
                    utilization         (5),
                    phy-error-offset    (6),
                    crc-errors-offset   (7),
                    radar-detected      (8)
                }
                -- contains hyphens due to historical reasons

RbtwsChannelNum ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Channel Number"
    SYNTAX      Unsigned32 (1..1024)

RbtwsRadioEnable ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Radio mode (administratively enabled or disabled)."
    SYNTAX      INTEGER {
                    enabled  (1),
                    disabled (2)
                }

RbtwsRadioConfigState ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Radio Configuration State, as seen by the AC."
    SYNTAX      INTEGER {
                    configInit  (1),
                    configFail  (2),
                    configOk    (3)
                }

RbtwsRadioRate ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d-1"
    STATUS      current
    DESCRIPTION
        "The possible transmission rates of an AP radio.
        Both a and b/g rates are covered; a specific radio will report
        the applicable transmission rates (either a or b/g).
        Here are the possible rates, in Mbps:
        - 802.11g radios: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, or 1;
        - 802.11b radios: 11, 5.5, 2, or 1;
        - 802.11a radios: 54, 48, 36, 24, 18, 12, 9, or 6.
        The value in MIB is specified as the rate in Mbps times 10,
        in order to have only integer values, zero meaning unknown rate."
    SYNTAX      Unsigned32 (0 | 10..540)

RbtwsRadioType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Enumeration to indicate the Radio Type, as seen by AC."
    SYNTAX      INTEGER {
                    typeUnknown     (1),
                    typeA           (2), -- 802.11a
                    typeB           (3), -- 802.11b
                    typeG           (4)  -- 802.11b+g
                }

RbtwsRssi ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "RSSI (Received Signal Strength Indicator) for last packet
        received from this neighbor, in decibels referred to
        1 milliwatt (dBm). A higher value indicates a stronger signal."
    SYNTAX      Integer32 (-100..0)

RbtwsApWasOperational ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Enumeration to indicate whether the AP was operational
        before a transition occured. Normally used in notifications."
    SYNTAX      INTEGER {
                    oper    (1),
                    nonOper (2)
                }

END