mirror of
https://github.com/librenms/librenms.git
synced 2024-10-07 16:52:45 +00:00
Adam Amstrong
02b3530f38
git-svn-id: http://www.observium.org/svn/observer/trunk@1575 61d68cd4-352d-0410-923a-c4978735b2b8
10348 lines
383 KiB
Plaintext
10348 lines
383 KiB
Plaintext
NETLINK-SPECIFIC-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- **************************************************************************
|
|
-- * *
|
|
-- * CSI Netlink *
|
|
-- * *
|
|
-- * File: netlink-mib.txt *
|
|
-- * Release: 4.0.0 (with some pre 4.0.2 Voice Additions *
|
|
-- * Release Date: April 3, 1998 *
|
|
-- * *
|
|
-- **************************************************************************
|
|
-- * *
|
|
-- * Copyright (c) 1998 by CSI Netlink. All rights reserved. No part of *
|
|
-- * this work covered by copyrights herein may be reproduced or copied in *
|
|
-- * any form or by any means - electronic, graphic, or mechanical, *
|
|
-- * including photocopying, recording, taping, or using information and *
|
|
-- * retrieval systems - without prior written permission from CSI Netlink. *
|
|
-- * *
|
|
-- * This is proprietary information which is protected by copyright. *
|
|
-- * Netlink, FRX4000 (TM), FRX6000 (TM), FRX7000 (TM), and FRX8000 (TM) *
|
|
-- * are trademarks of Cabletron Systems, Inc. NetFRAD (TM) and OmniLinx *
|
|
-- * Switch (TM) are trademarks of CSI Netlink. All other product *
|
|
-- * designations are the property of their respective owners. *
|
|
-- * *
|
|
-- **************************************************************************
|
|
|
|
IMPORTS
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
RowStatus, MacAddress, TimeInterval
|
|
FROM SNMPv2-TC
|
|
mib-2, DisplayString, PhysAddress
|
|
FROM RFC1213-MIB
|
|
enterprises, mgmt, TimeTicks, Gauge, Counter, IpAddress, NetworkAddress
|
|
FROM RFC1155-SMI;
|
|
|
|
-- This MIB module uses the extended OBJECT-TYPE macro as
|
|
-- defined in RFC 1212.
|
|
|
|
-- textual conventions
|
|
|
|
-- DisplayString ::= OCTET STRING
|
|
-- This data type is used to model textual information taken
|
|
-- from the NVT ASCII character set. By convention, objects
|
|
-- with this syntax are declared as having
|
|
--
|
|
-- SIZE (0..255)
|
|
|
|
-- PhysAddress ::= OCTET STRING
|
|
-- This data type is used to model media addresses. For many
|
|
-- types of media, this will be in a binary representation.
|
|
-- For example, an ethernet address would be represented as
|
|
-- a string of 6 octets.
|
|
|
|
NlSubscriberAddress ::= OCTET STRING (SIZE(1..15))
|
|
-- this should really be a X121Address, which is defined in RFC 1382 as
|
|
-- X121Address ::= OCTET STRING (SIZE(0..17))
|
|
-- 0 to 17 bytes in length containing the ASCII
|
|
-- characters [0-9], each octet contains one digit
|
|
-- of the address.
|
|
-- Since we only support non-TOA/NPI type addresses (see X.25 Blue Book)
|
|
-- our addresses are upto 15 digits.
|
|
-- Since we cannot configure empty addresses, the minimum is 1 digit,
|
|
-- which suits us, since indices need at least one component.
|
|
-- NOTE: need to support wildcard characters '?' and '*'.
|
|
-- NOTE: the screen interface allows 'U' and 'G', which is a bug.
|
|
-- Also, since we use it as an index, we could use the binary equivalent
|
|
-- of decimal digits, rather than the ASCII equivalent. But, since digits
|
|
-- besides decimal digits are used (?, *) we prefer the ASCII representation.
|
|
-- This will make usage from most management applications (ie. browsers) a
|
|
-- little more complicated, but no funny mapping is done.
|
|
-- We use the SMI rules for variable-string indexing (first subid specifies
|
|
-- the length, the rest of the subids are big-endian).
|
|
|
|
-- the following RFC 1747 object type is used by the SDLC link station
|
|
-- tables defined in this mib.
|
|
snaDLC OBJECT IDENTIFIER ::= {mib-2 41}
|
|
sdlc OBJECT IDENTIFIER ::= {snaDLC 1}
|
|
sdlcLSGroup OBJECT IDENTIFIER ::= {sdlc 2}
|
|
sdlcLSAdminTable OBJECT IDENTIFIER ::= {sdlcLSGroup 1}
|
|
sdlcLSAdminEntry OBJECT IDENTIFIER ::= {sdlcLSAdminTable 1}
|
|
sdlcLSAddress OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value is the poll address of the
|
|
secondary link station for this SDLC link. It
|
|
uniquely identifies the SDLC link station
|
|
within a single SDLC port."
|
|
::= { sdlcLSAdminEntry 1 }
|
|
|
|
netlink OBJECT IDENTIFIER ::= { enterprises 173 }
|
|
|
|
-- ***********************
|
|
-- * THE NETWORK GROUP *
|
|
-- ***********************
|
|
|
|
network OBJECT IDENTIFIER ::= { netlink 6 }
|
|
netstat OBJECT IDENTIFIER ::= { network 1 }
|
|
|
|
--
|
|
-- The netstat group is used to describe network status information for
|
|
-- a node. It only applies to the FRX8000 nodes since the FRX4000s and
|
|
-- FRX6000s have no knowledge of any other nodes.
|
|
--
|
|
|
|
nsMaxNeigh OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Maximum number of neighbor nodes. This value is currently
|
|
always 64 for FRX8000 and 20 for an N7400 or 7500.
|
|
A neighbor is the closest node in a path from the local node."
|
|
::= { netstat 1 }
|
|
|
|
nsThisNode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "This nodes number. (1-250) "
|
|
::= { netstat 2 }
|
|
|
|
nsNodTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A table showing all nodes known to this node
|
|
along with status and neighbor information."
|
|
::= { netstat 3 }
|
|
|
|
nsEntry OBJECT-TYPE
|
|
SYNTAX NsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "Each entry of the node table is indexed by
|
|
node number."
|
|
INDEX { nsNodNum }
|
|
::= { nsNodTable 1 }
|
|
|
|
NsEntry ::=
|
|
SEQUENCE {
|
|
nsNodNum
|
|
INTEGER,
|
|
nsStatus
|
|
INTEGER,
|
|
nsNumNeigh
|
|
INTEGER
|
|
}
|
|
|
|
nsNodNum OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The node number of the desired node. This is the
|
|
index into the node table."
|
|
::= { nsEntry 1 }
|
|
|
|
nsStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The operational status of the node. The status is
|
|
given as:
|
|
1 = Node is defined in the database;
|
|
9 = Node is operational;"
|
|
::= { nsEntry 2 }
|
|
|
|
nsNumNeigh OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Current number of neighbor nodes to this node."
|
|
::= { nsEntry 3 }
|
|
|
|
nsNeighTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NsNeighEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "The neighbor table lists the status of a nodes
|
|
neighbors."
|
|
::= { netstat 4 }
|
|
|
|
nsNeighEntry OBJECT-TYPE
|
|
SYNTAX NsNeighEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "The table entries are indexed by the node number and
|
|
the neighbors node number."
|
|
INDEX { nsNTNode, nsNTNeigh }
|
|
::= { nsNeighTable 1 }
|
|
|
|
NsNeighEntry ::=
|
|
SEQUENCE {
|
|
nsNTNode
|
|
INTEGER,
|
|
nsNTNeigh
|
|
INTEGER,
|
|
nsNTNeighStat
|
|
INTEGER
|
|
}
|
|
|
|
nsNTNode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The node number of the node whose neighbor's status
|
|
is being sought."
|
|
::= { nsNeighEntry 1 }
|
|
|
|
nsNTNeigh OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The node number of the neighbor whose status is being
|
|
sought."
|
|
::= { nsNeighEntry 2 }
|
|
|
|
nsNTNeighStat OBJECT-TYPE
|
|
SYNTAX INTEGER { notConnected(1),
|
|
connected(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The status of the neighbor node given as:
|
|
1 = previously, but not currently, connected;
|
|
2 = Currently connected; "
|
|
::= { nsNeighEntry 3 }
|
|
|
|
-- ********************
|
|
-- * THE NODE GROUP *
|
|
-- ********************
|
|
|
|
local OBJECT IDENTIFIER ::= { netlink 7 }
|
|
node OBJECT IDENTIFIER ::= { local 1 }
|
|
nodeCfgTable OBJECT IDENTIFIER ::= { node 1 }
|
|
nodeAlmTable OBJECT IDENTIFIER ::= { node 2 }
|
|
nodeSNMPGroup OBJECT IDENTIFIER ::= { node 3 }
|
|
|
|
--
|
|
-- The NODE group is used to describe configuration of the node
|
|
--
|
|
|
|
nodeModel OBJECT-TYPE
|
|
SYNTAX INTEGER { model1(1),
|
|
model2(2),
|
|
rackmount(3),
|
|
highavail(4),
|
|
netfrad(5),
|
|
frx4000(6),
|
|
ss1800(7)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Describes the unit model"
|
|
::= { nodeSNMPGroup 1 }
|
|
|
|
--
|
|
-- The Traps group provides information about Traps on the node
|
|
--
|
|
|
|
nodeTrapText OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Text of the last alarm generated"
|
|
::= { nodeSNMPGroup 2 }
|
|
|
|
nodeTrapAdrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TpAdrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A table used to define the IP address of end-nodes
|
|
to receive alarms generated by this node. Up to 16 addresses
|
|
can be specified."
|
|
::= { nodeSNMPGroup 3 }
|
|
|
|
tpAdrEntry OBJECT-TYPE
|
|
SYNTAX TpAdrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Trap entry containing objects relating to SNMP traps."
|
|
INDEX { tpAdrIdx }
|
|
::= { nodeTrapAdrTable 1 }
|
|
|
|
TpAdrEntry ::=
|
|
SEQUENCE {
|
|
tpAdrIdx
|
|
INTEGER,
|
|
tpAddress
|
|
IpAddress,
|
|
tpAdrFlag
|
|
INTEGER,
|
|
tpAdrSLev
|
|
INTEGER
|
|
}
|
|
tpAdrIdx OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The index into the trap configuration table"
|
|
::= { tpAdrEntry 1 }
|
|
|
|
tpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The IP Address of the end-station to send alarms"
|
|
::= { tpAdrEntry 2 }
|
|
|
|
tpAdrFlag OBJECT-TYPE
|
|
SYNTAX INTEGER { disableTraps(1),
|
|
enableTraps(2),
|
|
delete(3) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Defines the state of this entry as:
|
|
0 = Do not send traps to the Address;
|
|
1 = Send traps to the Address;
|
|
2 = This Address entry is deleted from the table; "
|
|
::= { tpAdrEntry 3 }
|
|
|
|
tpAdrSLev OBJECT-TYPE
|
|
SYNTAX INTEGER { critical(1),
|
|
major(2),
|
|
minor(3),
|
|
informational(4) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Lowest severity level traps that will be sent to
|
|
this Address; 1 is the highest, 4 is the lowest."
|
|
::= { tpAdrEntry 4 }
|
|
|
|
nodeBagTable OBJECT IDENTIFIER ::= { node 4 }
|
|
|
|
-- *****************************
|
|
-- * THE HARDWARE CARD GROUP *
|
|
-- *****************************
|
|
|
|
hwcard OBJECT IDENTIFIER ::= { local 2 }
|
|
|
|
--
|
|
-- This item describes the Max number of Protocols allowed on each RLP
|
|
--
|
|
|
|
rlpMaxProtos OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Maximum number of protocols allowed on each RLP.
|
|
This value is currently 11 for FRX4000s, 9 for FRX6000s, and
|
|
5 for FRX7000s and FRX8000s."
|
|
::= { hwcard 1 }
|
|
|
|
--
|
|
-- The RLP Table used to describe each RLP on a node
|
|
--
|
|
|
|
rlpConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to describe each RLP on the node"
|
|
::= { hwcard 2 }
|
|
|
|
rlpEntry OBJECT-TYPE
|
|
SYNTAX RlpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An RLP entry containing objects relating to RLPs."
|
|
INDEX { rlpIndex }
|
|
::= { rlpConfigTable 1 }
|
|
|
|
RlpEntry ::=
|
|
SEQUENCE {
|
|
rlpIndex
|
|
INTEGER,
|
|
rlpStatus
|
|
INTEGER,
|
|
rlpMemorySize
|
|
INTEGER,
|
|
rlpLIC1Type
|
|
INTEGER,
|
|
rlpLIC2Type
|
|
INTEGER,
|
|
rlpProtocol
|
|
OCTET STRING,
|
|
rlpGroupNumber
|
|
INTEGER,
|
|
rlpGroupResponsibility
|
|
INTEGER
|
|
}
|
|
|
|
rlpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The RLP number on the node"
|
|
::= { rlpEntry 1 }
|
|
|
|
rlpStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { installed(1),
|
|
configured(2),
|
|
load-failed(3),
|
|
loading(4),
|
|
ipl-failed(5),
|
|
ipl-in-progress(6),
|
|
failed(7),
|
|
operational(8),
|
|
power-off(9),
|
|
power-on(10) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The current state of this RLP"
|
|
::= { rlpEntry 2 }
|
|
|
|
rlpMemorySize OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The amount of memory installed on this RLP"
|
|
::= { rlpEntry 3 }
|
|
|
|
rlpLIC1Type OBJECT-TYPE
|
|
SYNTAX INTEGER { none(1),
|
|
rs232(2),
|
|
rs422(3),
|
|
v35(4) ,
|
|
hs-rs232(5),
|
|
x21(6),
|
|
rs449(7),
|
|
universal(8),
|
|
t1(10),
|
|
e1(11),
|
|
voice(13)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Type of Line Interface card in the first position"
|
|
::= { rlpEntry 4 }
|
|
|
|
rlpLIC2Type OBJECT-TYPE
|
|
SYNTAX INTEGER { none(1),
|
|
rs232(2),
|
|
rs422(3),
|
|
v35(4) ,
|
|
hs-rs232(5),
|
|
x21(6),
|
|
rs449(7),
|
|
universal(8),
|
|
t1(10),
|
|
e1(11),
|
|
voice(13)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Type of Line Interface card in the second position"
|
|
::= { rlpEntry 5 }
|
|
|
|
rlpProtocol OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The protocols configured on this RLP. This is an OCTET
|
|
STRING where each octet represents a protocol type. The size of this
|
|
is the maximum number of protocols allowed on an RLP (rlpMaxProtos).
|
|
The protocol types are defined as:
|
|
00 = none
|
|
01 = X.25
|
|
02 = Frame Relay
|
|
03 = Async
|
|
04 = SDLC
|
|
05 = BSC Interactive
|
|
07 = IP
|
|
08 = SNMP
|
|
09 = RIP
|
|
0A = LLC2
|
|
0B = Trunk
|
|
0C = IPX
|
|
0D = Config
|
|
0E = LLC2-R
|
|
0F = IP-R
|
|
10 = NVSP
|
|
11 = Bridge
|
|
"
|
|
::= { rlpEntry 6 }
|
|
|
|
rlpGroupNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The group to which this RLP belongs- always 1 if not
|
|
FRX7000."
|
|
::= { rlpEntry 7 }
|
|
|
|
rlpGroupResponsibility OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary (1),
|
|
secondary (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The responsibility of this RLP within its group, always
|
|
primary if not FRX7000."
|
|
::= { rlpEntry 8 }
|
|
|
|
-- ********************
|
|
-- * THE PORT GROUP *
|
|
-- ********************
|
|
|
|
port OBJECT IDENTIFIER ::= { local 3 }
|
|
portX25Group OBJECT IDENTIFIER ::= { port 1 }
|
|
|
|
portPhyX25AdminTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortPhyX25AdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains Netlink Enterprise specific
|
|
objects to manage an X25 port. Changing one of
|
|
these parameters may take effect in the operating
|
|
port immediately or may wait until the interface is
|
|
restarted depending on the details of the
|
|
implementation.
|
|
|
|
Most of the objects in this read-write table have
|
|
corresponding read-only objects in the
|
|
portX25OperTable that return the current
|
|
operating value.
|
|
|
|
The operating values may be different from these
|
|
configured values if a configured parameter was
|
|
configured after the interface was started."
|
|
::= { portX25Group 1 }
|
|
|
|
portPhyX25AdminEntry OBJECT-TYPE
|
|
SYNTAX PortPhyX25AdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of configured values for an X25 port."
|
|
INDEX { nlIfRlp, nlIfPort }
|
|
::= { portPhyX25AdminTable 1 }
|
|
|
|
PortPhyX25AdminEntry ::= SEQUENCE
|
|
{
|
|
portPhyX25AdminConnector INTEGER,
|
|
portPhyX25AdminSpeed INTEGER,
|
|
portPhyX25AdminGenerateClock INTEGER,
|
|
portPhyX25AdminRcvClockFromDTE INTEGER,
|
|
portPhyX25AdminDialOut INTEGER,
|
|
portPhyX25AdminInactivityTimer INTEGER,
|
|
portPhyX25AdminDisconnectTimer INTEGER,
|
|
portPhyX25AdminSetupTimer INTEGER,
|
|
portPhyX25AdminTrunkFlag INTEGER,
|
|
portPhyX25AdminTrunkGroup OCTET STRING,
|
|
portPhyX25AdminRowStatus RowStatus
|
|
}
|
|
|
|
portPhyX25AdminConnector OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
rs232 (3),
|
|
v35 (5),
|
|
rs449 (6),
|
|
rs530 (7),
|
|
x21 (8),
|
|
t1 (10),
|
|
e1 (11)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Physical port interface connector type."
|
|
::= { portPhyX25AdminEntry 1 }
|
|
|
|
portPhyX25AdminSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the speed of the X25 port. The speed may
|
|
only be set to one of a series of reasonable values, and if an attempt
|
|
is made to set the speed to a value which is within the valid range
|
|
but not equal to one of these values, the speed will be rounded up.
|
|
If the connector type of the port is RS232, the port could be a
|
|
standard port or a high speed port. If the port is a high speed
|
|
RS232 port, the maximum valid speed is 256000. If the port is a
|
|
standard RS232 port, the maximum valid speed is 64000 on the
|
|
FRX4000/SS1840 and 19200 on all other products. It may be possible
|
|
to set the speed of a standard RS232 port to a speed which is valid
|
|
for a high speed RS232 port but invalid for a standard RS232 port.
|
|
In this case, the port may not end up having the invalid speed.
|
|
The default speed for a standard RS232 port on the FRX6000 is 19200."
|
|
DEFVAL { 64000 }
|
|
|
|
::= { portPhyX25AdminEntry 2 }
|
|
|
|
portPhyX25AdminGenerateClock OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies whether the port will generate the clock
|
|
necessary to synchronize traffic over the link."
|
|
DEFVAL { no }
|
|
::= { portPhyX25AdminEntry 3 }
|
|
|
|
portPhyX25AdminRcvClockFromDTE OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines whether the receive clock
|
|
will be used from the DTE."
|
|
DEFVAL { no }
|
|
::= { portPhyX25AdminEntry 4 }
|
|
|
|
portPhyX25AdminDialOut OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
dialIn(2),
|
|
dialOut(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This flag indicates whether the port is connected to a dial
|
|
modem, and whethter connections will be initiated through
|
|
dial-in or dial-out calls."
|
|
DEFVAL { none }
|
|
::= { portPhyX25AdminEntry 5 }
|
|
|
|
portPhyX25AdminInactivityTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (1..30)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This timer defines in minutes, the period of inactivity
|
|
allowed between calls. Once the timer expires, the port
|
|
is disabled untill the next call is placed, if a Dial out
|
|
port, or the Disconnect Timer expires, if a Dial in port.
|
|
This variable is only meaningful if the port is a Dial port."
|
|
DEFVAL { 5 }
|
|
::= { portPhyX25AdminEntry 6 }
|
|
|
|
portPhyX25AdminDisconnectTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This timer defines, in seconds, the length of time a
|
|
dial-in port will remain disabled after expiration of the
|
|
InActivity Timer."
|
|
DEFVAL { 5 }
|
|
::= { portPhyX25AdminEntry 7 }
|
|
|
|
portPhyX25AdminSetupTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This timer determines the length of time, in seconds, that
|
|
a response must be received by the port, after entering the
|
|
Linkup state. If a response is not received, the port enters
|
|
a Failed state."
|
|
DEFVAL { 5 }
|
|
::= { portPhyX25AdminEntry 8 }
|
|
|
|
portPhyX25AdminTrunkFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This flag, when set, indicates the port is associated
|
|
with a network trunk group. It will be disabled/enabled
|
|
if the network trunk is not operational."
|
|
DEFVAL { no }
|
|
::= { portPhyX25AdminEntry 9 }
|
|
|
|
portPhyX25AdminTrunkGroup OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable contains a string of 8 bytes, with each
|
|
byte indicating 8 ports on an RLP that may be a part of
|
|
a trunk group. Since a TurboFrad has only 1 RLP, only the
|
|
first byte is valid if the node is an FRX4000. Each
|
|
port is represented by a single bit within the RLP byte.
|
|
The bit position represents the port number...for example,
|
|
if port 2 on RLP 0 was in a trunk group, the first byte of
|
|
the string would contain x04 and all other bytes would be 0."
|
|
::= { portPhyX25AdminEntry 10 }
|
|
|
|
portPhyX25AdminRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the portPhyX25AdminTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device, and which is
|
|
supplied by a management station wishing to exercise an
|
|
on-line update of the existing conceptual row. For a
|
|
management protocol set operation, a genErr response is
|
|
returned when the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
::= { portPhyX25AdminEntry 11 }
|
|
|
|
portPhyX25OperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortPhyX25OperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains Netlink Enterprise specific
|
|
objects to manage an X25 port. Changing one of
|
|
these parameters may take effect in the operating
|
|
port immediately or may wait until the interface is
|
|
restarted depending on the details of the
|
|
implementation.
|
|
|
|
All of the objects in this table are read-only.
|
|
|
|
The operating values may be different from these
|
|
configured values if a configured parameter was
|
|
configured after the interface was started."
|
|
::= { portX25Group 2 }
|
|
|
|
portPhyX25OperEntry OBJECT-TYPE
|
|
SYNTAX PortPhyX25OperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of configured values for an X25 port."
|
|
INDEX { nlIfRlp, nlIfPort }
|
|
::= { portPhyX25OperTable 1 }
|
|
|
|
PortPhyX25OperEntry ::= SEQUENCE
|
|
{
|
|
portPhyX25OperConnector INTEGER,
|
|
portPhyX25OperSpeed INTEGER,
|
|
portPhyX25OperGenerateClock INTEGER,
|
|
portPhyX25OperRcvClockFromDTE INTEGER,
|
|
portPhyX25OperDialOut INTEGER,
|
|
portPhyX25OperInactivityTimer INTEGER,
|
|
portPhyX25OperDisconnectTimer INTEGER,
|
|
portPhyX25OperSetupTimer INTEGER,
|
|
portPhyX25OperTrunkFlag INTEGER,
|
|
portPhyX25OperTrunkGroup OCTET STRING
|
|
}
|
|
|
|
portPhyX25OperConnector OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
rs232 (3),
|
|
v35 (5),
|
|
rs449 (6),
|
|
rs530 (7),
|
|
x21 (8),
|
|
t1 (10),
|
|
e1 (11)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Physical port interface connector type."
|
|
::= { portPhyX25OperEntry 1 }
|
|
|
|
portPhyX25OperSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the speed of the X25 port. The speed may
|
|
only be set to one of a series of reasonable values, and if an attempt
|
|
is made to set the speed to a value which is within the valid range
|
|
but not equal to one of these values, the speed will be rounded up.
|
|
If the connector type of the port is RS232, the port could be a
|
|
standard port or a high speed port. If the port is a high speed
|
|
RS232 port, the maximum valid speed is 256000. If the port is a
|
|
standard RS232 port, the maximum valid speed is 64000 on the
|
|
FRX4000/SS1840 and 19200 on all other products. It may be possible
|
|
to set the speed of a standard RS232 port to a speed which is valid
|
|
for a high speed RS232 port but invalid for a standard RS232 port.
|
|
In this case, the port may not end up having the invalid speed.
|
|
The default speed for a standard RS232 port on the FRX6000 is 19200."
|
|
::= { portPhyX25OperEntry 2 }
|
|
|
|
portPhyX25OperGenerateClock OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies whether the port will generate the clock
|
|
necessary to synchronize traffic over the link."
|
|
::= { portPhyX25OperEntry 3 }
|
|
|
|
portPhyX25OperRcvClockFromDTE OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines whether the receive clock will be
|
|
used from the DTE."
|
|
::= { portPhyX25OperEntry 4 }
|
|
|
|
portPhyX25OperDialOut OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
dialIn(2),
|
|
dialOut(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This flag indicates whether the port is connected to a dial
|
|
modem, and whethter connections will be initiated through
|
|
dial-in or dial-out calls."
|
|
::= { portPhyX25OperEntry 5 }
|
|
|
|
portPhyX25OperInactivityTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (1..30)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This timer defines in minutes, the period of inactivity
|
|
allowed between calls. Once the timer expires, the port
|
|
is disabled untill the next call is placed, if a Dial out
|
|
port, or the Disconnect Timer expires, if a Dial in port.
|
|
This variable is only meaningful if the port is a Dial port."
|
|
::= { portPhyX25OperEntry 6 }
|
|
|
|
portPhyX25OperDisconnectTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This timer defines, in seconds, the length of time a
|
|
dial-in port will remain disabled after expiration of the
|
|
InActivity Timer."
|
|
::= { portPhyX25OperEntry 7 }
|
|
|
|
portPhyX25OperSetupTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This timer determines the length of time, in seconds, that
|
|
a response must be received by the port, after entering the
|
|
Linkup state. If a response is not received, the port enters
|
|
a Failed state."
|
|
::= { portPhyX25OperEntry 8 }
|
|
|
|
portPhyX25OperTrunkFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This flag, when set, indicates the port is associated
|
|
with a network trunk group. It will be disabled/enabled
|
|
if the network trunk is not operational."
|
|
::= { portPhyX25OperEntry 9 }
|
|
|
|
portPhyX25OperTrunkGroup OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable contains a string of 8 bytes, with each
|
|
byte indicating a port on this RLP that may be a part of
|
|
a trunk group."
|
|
::= { portPhyX25OperEntry 10 }
|
|
|
|
-- Admin Table for X25 logical ports
|
|
|
|
portLogicalX25AdminTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortLogicalX25AdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains Netlink Enterprise specific
|
|
objects to manage an X25 Logical port. Changing one of
|
|
these parameters may take effect in the operating
|
|
port immediately or may wait until the interface is
|
|
restarted depending on the details of the
|
|
implementation.
|
|
|
|
The operating values may be different from these
|
|
configured values if a configured parameter was
|
|
configured after the interface was started."
|
|
::= { portX25Group 3 }
|
|
|
|
portLogicalX25AdminEntry OBJECT-TYPE
|
|
SYNTAX PortLogicalX25AdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of configured values for an X25 logical port."
|
|
INDEX { nlIfRlp, nlIfPhyPort, nlIfPort }
|
|
::= { portLogicalX25AdminTable 1 }
|
|
|
|
PortLogicalX25AdminEntry ::= SEQUENCE
|
|
{
|
|
portLogicalX25AdminFrDlci INTEGER,
|
|
portLogicalX25AdminCxnPriority INTEGER,
|
|
portLogicalX25AdminRfc1490 INTEGER,
|
|
portLogicalX25AdminBAG INTEGER,
|
|
portLogicalX25AdminRowStatus RowStatus
|
|
}
|
|
|
|
portLogicalX25AdminFrDlci OBJECT-TYPE
|
|
SYNTAX INTEGER (16..991)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The DLCI number used to identify the entry in the table. The
|
|
range is 16-991. "
|
|
DEFVAL { 16 }
|
|
::= { portLogicalX25AdminEntry 1 }
|
|
|
|
portLogicalX25AdminCxnPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..9)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This field sets the priority of the connection among others on the
|
|
physical port. The range is 0 for lowest priority to 9 for
|
|
the highest priority. "
|
|
DEFVAL { 0 }
|
|
::= { portLogicalX25AdminEntry 2 }
|
|
|
|
portLogicalX25AdminRfc1490 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
annexG (1),
|
|
rfc1490 (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This field indicates the encapsulation method used"
|
|
DEFVAL { rfc1490 }
|
|
::= { portLogicalX25AdminEntry 3 }
|
|
|
|
portLogicalX25AdminBAG OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Assigns this DLCI to one of sixteen groups whose parameters
|
|
regulate bandwidth usage. A 0 value indicates the DLCI does
|
|
not use BAGs"
|
|
DEFVAL { 0 }
|
|
::= { portLogicalX25AdminEntry 4 }
|
|
|
|
portLogicalX25AdminRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the portLogicalX25AdminTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device, and which is
|
|
supplied by a management station wishing to exercise an
|
|
on-line update of the existing conceptual row. For a
|
|
management protocol set operation, a genErr response is
|
|
returned when the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
::= { portLogicalX25AdminEntry 5 }
|
|
|
|
-- Oper Table for X25 logical ports
|
|
|
|
portLogicalX25OperTable OBJECT-TYPE
|
|
|
|
SYNTAX SEQUENCE OF PortLogicalX25OperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains Netlink Enterprise specific
|
|
objects to manage an X25 Logical port. Changing one of
|
|
these parameters may take effect in the operating
|
|
port immediately or may wait until the interface is
|
|
restarted depending on the details of the
|
|
implementation.
|
|
|
|
The operating values may be different from these
|
|
configured values if a configured parameter was
|
|
configured after the interface was started."
|
|
::= { portX25Group 4 }
|
|
|
|
portLogicalX25OperEntry OBJECT-TYPE
|
|
SYNTAX PortLogicalX25OperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of configured values for an X25 port."
|
|
INDEX { nlIfRlp, nlIfPhyPort, nlIfPort }
|
|
::= { portLogicalX25OperTable 1 }
|
|
|
|
PortLogicalX25OperEntry ::= SEQUENCE
|
|
{
|
|
portLogicalX25OperFrDlci INTEGER,
|
|
portLogicalX25OperCxnPriority INTEGER,
|
|
portLogicalX25OperRfc1490 INTEGER,
|
|
portLogicalX25OperBAG INTEGER
|
|
}
|
|
|
|
portLogicalX25OperFrDlci OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The DLCI number used to identify the entry in the table. The
|
|
range is 16-991. "
|
|
|
|
::= { portLogicalX25OperEntry 1 }
|
|
|
|
portLogicalX25OperCxnPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..9)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This field sets the priority of the connection among others on the
|
|
physical port. The range is 0 for lowest priority to 9 for
|
|
the highest priority. "
|
|
::= { portLogicalX25OperEntry 2 }
|
|
|
|
portLogicalX25OperRfc1490 OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
annexG (1),
|
|
rfc1490 (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This field indicates the encapsulation method used"
|
|
::= { portLogicalX25OperEntry 3 }
|
|
|
|
portLogicalX25OperBAG OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Assigns this DLCI to one of sixteen groups whose parameters
|
|
regulate bandwidth usage."
|
|
::= { portLogicalX25OperEntry 4 }
|
|
|
|
-- Admin Table for both logical and physical ports
|
|
--
|
|
|
|
portX25AdminTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortX25AdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains Netlink Enterprise specific
|
|
objects to manage an X25 port. Changing one of
|
|
these parameters may take effect in the operating
|
|
port immediately or may wait until the interface is
|
|
restarted depending on the details of the
|
|
implementation.
|
|
|
|
Most of the objects in this read-write table have
|
|
corresponding read-only objects in the
|
|
portX25OperTable that return the current
|
|
operating value.
|
|
|
|
The operating values may be different from these
|
|
configured values if a configured parameter was
|
|
configured after the interface was started."
|
|
::= { portX25Group 5 }
|
|
|
|
portX25AdminEntry OBJECT-TYPE
|
|
SYNTAX PortX25AdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of configured values for an X25 port."
|
|
INDEX { nlIfRlp, nlIfPort }
|
|
|
|
::= { portX25AdminTable 1 }
|
|
|
|
PortX25AdminEntry ::= SEQUENCE
|
|
{
|
|
portX25AdminBlockedFlag INTEGER,
|
|
portX25AdminFlowCtrlNeg INTEGER,
|
|
portX25AdminThruptClassNeg INTEGER,
|
|
portX25AdminLocChgPrev INTEGER,
|
|
portX25AdminRevChgAccpt INTEGER,
|
|
portX25AdminFastSelAccpt INTEGER,
|
|
portX25AdminInCallBar INTEGER,
|
|
portX25AdminOutCallBar INTEGER,
|
|
portX25AdminMaxPktSize INTEGER,
|
|
portX25AdminDefPktSize INTEGER,
|
|
portX25AdminMaxWinSize INTEGER,
|
|
portX25AdminDefWinSize INTEGER,
|
|
portX25AdminMaxThruptClass INTEGER,
|
|
portX25AdminCUGPref INTEGER,
|
|
portX25AdminCUGIndex INTEGER,
|
|
portX25AdminCUGIncAccess INTEGER,
|
|
portX25AdminCUGOutAccess INTEGER
|
|
}
|
|
|
|
portX25AdminBlockedFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" A flag which when set, means the port should not be
|
|
enabled after a boot-up of the node. "
|
|
DEFVAL { no }
|
|
::= { portX25AdminEntry 1 }
|
|
|
|
portX25AdminFlowCtrlNeg OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A flag which if set, permits negotiation of
|
|
the flow control parameters on a per call basis.
|
|
If N is selected, the default packet and window
|
|
sizes will be used. If Y is selected, the packet
|
|
or window size in a call packet (up to the
|
|
configured Max Packet Size or Max Window Size) is
|
|
used."
|
|
DEFVAL { no }
|
|
::= { portX25AdminEntry 2 }
|
|
|
|
portX25AdminThruptClassNeg OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A flag which ,if set, permists negotiation of
|
|
the throughput class for either direction of
|
|
data transmission on a per call basis. If N is
|
|
selected, the configured Max Throughput Class
|
|
value is used. If Y, any throughput class in
|
|
a call packet (up to the Max Thruput Class) is
|
|
used."
|
|
DEFVAL { no }
|
|
::= { portX25AdminEntry 3 }
|
|
|
|
portX25AdminLocChgPrev OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If Y is selected, no calls can be charged to
|
|
port. Incoming calls from the network with
|
|
reverse charge specified will be rejected. Outgoing
|
|
calls will insert reverse charge in the call packet
|
|
if not already included."
|
|
DEFVAL { no }
|
|
::= { portX25AdminEntry 4 }
|
|
|
|
portX25AdminRevChgAccpt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A flag, if set, that authorizes transmission of
|
|
incoming calls that request the reverse charge
|
|
facility. If N is selected, and a call requests
|
|
it, it will not be transmitted."
|
|
DEFVAL { no }
|
|
::= { portX25AdminEntry 5 }
|
|
|
|
portX25AdminFastSelAccpt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A flag, if set, that authorizes transmission of
|
|
incoming calls that request the Fast Select
|
|
facility."
|
|
DEFVAL { no }
|
|
::= { portX25AdminEntry 6 }
|
|
|
|
portX25AdminInCallBar OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An X25 facility that prevents transmission of
|
|
incoming calls to the local DTE."
|
|
DEFVAL { no }
|
|
::= { portX25AdminEntry 7 }
|
|
|
|
portX25AdminOutCallBar OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An X25 facility that prevents transmission of
|
|
incoming calls to the local DTE."
|
|
DEFVAL { no }
|
|
::= { portX25AdminEntry 8 }
|
|
|
|
portX25AdminMaxPktSize OBJECT-TYPE
|
|
SYNTAX INTEGER (128..4096)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The maximum data packet size that will be allowed to pass
|
|
through this port."
|
|
DEFVAL { 1024 }
|
|
::= { portX25AdminEntry 9 }
|
|
|
|
portX25AdminDefPktSize OBJECT-TYPE
|
|
SYNTAX INTEGER (16..4096)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the size that will be assigned to an incoming call
|
|
setup packet if the packet does not request a packet size."
|
|
DEFVAL { 128 }
|
|
::= { portX25AdminEntry 10 }
|
|
|
|
portX25AdminMaxWinSize OBJECT-TYPE
|
|
SYNTAX INTEGER (2..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the maximum number of unacknowledged packets
|
|
per logical channel that can pass through this port."
|
|
DEFVAL { 7 }
|
|
::= { portX25AdminEntry 11 }
|
|
|
|
portX25AdminDefWinSize OBJECT-TYPE
|
|
SYNTAX INTEGER (1..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This size will be assigned to an incoming call
|
|
setup packet if the packet doesn't request a window size."
|
|
DEFVAL { 2 }
|
|
::= { portX25AdminEntry 12 }
|
|
|
|
portX25AdminMaxThruptClass OBJECT-TYPE
|
|
SYNTAX INTEGER (3..13)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This specifies the default throughput class that will be
|
|
inserted into a Call Request packet if Thruput Class
|
|
negotiation is not enabled or if a thruput class is not
|
|
requested in the call request."
|
|
::= { portX25AdminEntry 13 }
|
|
|
|
portX25AdminCUGPref OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This flag, if set, indicates the port belongs to at least
|
|
one CUG."
|
|
DEFVAL { no }
|
|
::= { portX25AdminEntry 14 }
|
|
|
|
portX25AdminCUGIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This number is an index into a Closed User Group table
|
|
which identifies the default Closed User Group for the
|
|
port."
|
|
DEFVAL { 1 }
|
|
::= { portX25AdminEntry 15 }
|
|
|
|
portX25AdminCUGIncAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This flag, when set, indicates whether this port will
|
|
be allowed to receive calls from outside its CUGs."
|
|
DEFVAL { no }
|
|
::= { portX25AdminEntry 16 }
|
|
|
|
portX25AdminCUGOutAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This flag, when set, indicates whether this port will
|
|
be allowed to make calls outside its CUGs."
|
|
DEFVAL { no }
|
|
::= { portX25AdminEntry 17 }
|
|
|
|
portX25OperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortX25OperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains Netlink Enterprise specific
|
|
objects to manage an X25 port. Changing one of
|
|
these parameters may take effect in the operating
|
|
port immediately or may wait until the interface is
|
|
restarted depending on the details of the
|
|
implementation.
|
|
|
|
The objects in this read-only table
|
|
corresponding read-only objects in the
|
|
portX25OperTable that return the current
|
|
operating value.
|
|
|
|
The operating values may be different from these
|
|
configured values if a configured parameter was
|
|
configured after the interface was started."
|
|
::= { portX25Group 6 }
|
|
|
|
portX25OperEntry OBJECT-TYPE
|
|
SYNTAX PortX25OperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of configured values for an X25 port."
|
|
INDEX { nlIfRlp, nlIfPort }
|
|
::= { portX25OperTable 1 }
|
|
|
|
PortX25OperEntry ::= SEQUENCE {
|
|
portX25OperBlockedFlag INTEGER,
|
|
portX25OperFlowCtrlNeg INTEGER,
|
|
portX25OperThruptClassNeg INTEGER,
|
|
portX25OperLocChgPrev INTEGER,
|
|
portX25OperRevChgAccpt INTEGER,
|
|
portX25OperFastSelAccpt INTEGER,
|
|
portX25OperInCallBar INTEGER,
|
|
portX25OperOutCallBar INTEGER,
|
|
portX25OperMaxPktSize INTEGER,
|
|
portX25OperDefPktSize INTEGER,
|
|
portX25OperMaxWinSize INTEGER,
|
|
portX25OperDefWinSize INTEGER,
|
|
portX25OperMaxThruptClass INTEGER,
|
|
portX25OperCUGPref INTEGER,
|
|
portX25OperCUGIndex INTEGER,
|
|
portX25OperCUGIncAccess INTEGER,
|
|
portX25OperCUGOutAccess INTEGER
|
|
}
|
|
|
|
portX25OperBlockedFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" A flag which when set, means the port should not be
|
|
enabled after a boot-up of the node. "
|
|
::= { portX25OperEntry 1 }
|
|
|
|
portX25OperFlowCtrlNeg OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A flag which if set, permits negotiation of
|
|
the flow control parameters on a per call basis.
|
|
If N is selected, the default packet and window
|
|
sizes will be used. If Y is selected, the packet
|
|
or window size in a call packet (up to the
|
|
configured Max Packet Size or Max Window Size) is
|
|
used."
|
|
::= { portX25OperEntry 2 }
|
|
|
|
portX25OperThruptClassNeg OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A flag which ,if set, permists negotiation of
|
|
the throughput class for either direction of
|
|
data transmission on a per call basis. If N is
|
|
selected, the configured Max Throughput Class
|
|
value is used. If Y, any throughput class in
|
|
a call packet (up to the Max Thruput Class) is
|
|
used."
|
|
::= { portX25OperEntry 3 }
|
|
|
|
portX25OperLocChgPrev OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If Y is selected, no calls can be charged to
|
|
port. Incoming calls from the network with
|
|
reverse charge specified will be rejected. Outgoing
|
|
calls will insert reverse charge in the call packet
|
|
if not already included."
|
|
::= { portX25OperEntry 4 }
|
|
|
|
portX25OperRevChgAccpt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A flag, if set, that authorizes transmission of
|
|
incoming calls that request the reverse charge
|
|
facility. If N is selected, and a call requests
|
|
it, it will not be transmitted."
|
|
::= { portX25OperEntry 5 }
|
|
|
|
portX25OperFastSelAccpt OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A flag, if set, that authorizes transmission of
|
|
incoming calls that request the Fast Select
|
|
facility."
|
|
::= { portX25OperEntry 6 }
|
|
|
|
portX25OperInCallBar OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An X25 facility that prevents transmission of
|
|
incoming calls to the local DTE."
|
|
::= { portX25OperEntry 7 }
|
|
|
|
portX25OperOutCallBar OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An X25 facility that prevents transmission of
|
|
incoming calls to the local DTE."
|
|
::= { portX25OperEntry 8 }
|
|
|
|
portX25OperMaxPktSize OBJECT-TYPE
|
|
SYNTAX INTEGER (128..4096)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The maximum data packet size that will be allowed to pass
|
|
through this port."
|
|
::= { portX25OperEntry 9 }
|
|
|
|
portX25OperDefPktSize OBJECT-TYPE
|
|
SYNTAX INTEGER (16..4096)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the size that will be assigned to an incoming call
|
|
setup packet if the packet does not request a packet size."
|
|
::= { portX25OperEntry 10 }
|
|
|
|
portX25OperMaxWinSize OBJECT-TYPE
|
|
SYNTAX INTEGER (2..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This is the maximum number of unacknowledged packets
|
|
per logical channel that can pass through this port."
|
|
::= { portX25OperEntry 11 }
|
|
|
|
portX25OperDefWinSize OBJECT-TYPE
|
|
SYNTAX INTEGER (1..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This size will be assigned to an incoming call
|
|
setup packet if the packet doesn't request a window size."
|
|
::= { portX25OperEntry 12 }
|
|
|
|
portX25OperMaxThruptClass OBJECT-TYPE
|
|
SYNTAX INTEGER (3..13)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This specifies the default throughput class that will be
|
|
inserted into a Call Request packet if Thruput Class
|
|
negotiation is not enabled or if a thruput class is not
|
|
requested in the call request."
|
|
::= { portX25OperEntry 13 }
|
|
|
|
portX25OperCUGPref OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This flag, if set, indicates the port belongs to at least
|
|
one CUG."
|
|
::= { portX25OperEntry 14 }
|
|
|
|
portX25OperCUGIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This number is an index into a Closed User Group table
|
|
which identifies the default Closed User Group for the
|
|
port."
|
|
::= { portX25OperEntry 15 }
|
|
|
|
portX25OperCUGIncAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This flag, when set, indicates whether this port will
|
|
be able to receive calls from outside its CUGs."
|
|
::= { portX25OperEntry 16 }
|
|
|
|
portX25OperCUGOutAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This flag, when set, indicates whether this port will
|
|
be able to make calls outside its CUGs."
|
|
::= { portX25OperEntry 17 }
|
|
|
|
portFrGroup OBJECT IDENTIFIER ::= { port 2 }
|
|
|
|
-- The Frame Relay Port Configuration table
|
|
-- contains information on the FR physical port.
|
|
|
|
portFrConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortFrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of Frame Relay ports . The number of
|
|
entries will be the number of Frame Relay ports on the node."
|
|
::= { portFrGroup 1 }
|
|
|
|
portFrEntry OBJECT-TYPE
|
|
SYNTAX PortFrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An Frame Relay Port entry containing objects
|
|
relating to the port that are configurable
|
|
by the user."
|
|
INDEX { portFrRlpIndex , portFrPortIndex }
|
|
::= { portFrConfigTable 1 }
|
|
|
|
PortFrEntry ::=
|
|
SEQUENCE {
|
|
portFrRlpIndex
|
|
INTEGER,
|
|
portFrPortIndex
|
|
INTEGER,
|
|
portFrBlockedFlag
|
|
INTEGER,
|
|
portFrMaxBytesPerFrame
|
|
INTEGER,
|
|
portFrT392Timer
|
|
INTEGER,
|
|
portFrOutgoingRateControl
|
|
INTEGER,
|
|
portFrBandwidthAllocation
|
|
INTEGER,
|
|
portFrConnector
|
|
INTEGER,
|
|
portFrLogicalDCE
|
|
INTEGER,
|
|
portFrGenClock
|
|
INTEGER,
|
|
portFrRcvClkFrmDTE
|
|
INTEGER,
|
|
portFrLLM
|
|
INTEGER,
|
|
portFrRowStatus
|
|
RowStatus,
|
|
portFrSpeed
|
|
INTEGER,
|
|
portFrBackupUseOnly
|
|
INTEGER
|
|
}
|
|
portFrRlpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The RLP number of the Frame Relay port. It will be in the
|
|
range 1-8."
|
|
::= { portFrEntry 1 }
|
|
portFrPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The Port number of the Frame Relay port. It will
|
|
be in the range 1-8 for a physical port. It will be in the range
|
|
9-64 for a Frame Relay logical port."
|
|
::= { portFrEntry 2 }
|
|
|
|
portFrBlockedFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" A flag which when set, means the port should not be
|
|
enabled after a boot-up of the node. "
|
|
DEFVAL { no }
|
|
::= { portFrEntry 3 }
|
|
|
|
portFrMaxBytesPerFrame OBJECT-TYPE
|
|
SYNTAX INTEGER (16..4096)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The maximum number of bytes allowed in an I Frame for this
|
|
Frame Relay port."
|
|
DEFVAL { 1600 }
|
|
::= { portFrEntry 4 }
|
|
|
|
portFrT392Timer OBJECT-TYPE
|
|
SYNTAX INTEGER (5..30)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This timer indicates how long the network will wait between
|
|
Status Enquiry messages before recording an error. It
|
|
should be greater than or equal to the frDlcmiPollingInterval
|
|
variable in the RFC1315 Mib."
|
|
DEFVAL { 15 }
|
|
::= { portFrEntry 5 }
|
|
|
|
portFrOutgoingRateControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This is a flag which, when set, enables the enforcement of
|
|
the Outgoing Rate Control parameters."
|
|
DEFVAL { no }
|
|
::= { portFrEntry 6 }
|
|
|
|
portFrBandwidthAllocation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This is a flag which, when set, enables whether the bandwidth
|
|
allocation will be enforced. "
|
|
DEFVAL { no }
|
|
::= { portFrEntry 7 }
|
|
|
|
portFrConnector OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rs232 (3),
|
|
v35 (5),
|
|
rs449 (6),
|
|
rs530 (7),
|
|
x21 (8),
|
|
t1 (10),
|
|
e1 (11)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This defines the connector type of the Frame Relay port."
|
|
::= { portFrEntry 8 }
|
|
|
|
portFrLogicalDCE OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This defines the port as logical DCE or DTE."
|
|
DEFVAL { no }
|
|
::= { portFrEntry 9 }
|
|
|
|
portFrGenClock OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This specifies whether the port will generate the clock
|
|
necessary to synchronize traffic over the link."
|
|
DEFVAL { no }
|
|
::= { portFrEntry 10 }
|
|
|
|
portFrRcvClkFrmDTE OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This allows the clock to be looped back from the DTE using
|
|
the TT (Terminal Timing) signal, which can be helpful on
|
|
high-speed lines."
|
|
DEFVAL { no }
|
|
::= { portFrEntry 11 }
|
|
|
|
portFrLLM OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
lmi(2),
|
|
annexd(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This determines whether, and what type of, configurable
|
|
network management (status enquiries) will be allowed."
|
|
DEFVAL { annexd }
|
|
::= { portFrEntry 12 }
|
|
|
|
portFrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the portFrConfigTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device, and which is
|
|
supplied by a management station wishing to exercise an
|
|
on-line update of the existing conceptual row. For a
|
|
management protocol set operation, a genErr response is
|
|
returned when the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
::= { portFrEntry 13 }
|
|
|
|
portFrSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER (75..2048000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the speed of the Frame Relay port. The speed may
|
|
only be set to one of a series of reasonable values, and if an attempt is made
|
|
to set the speed to a value which is within the valid range but not equal to one
|
|
of these values, the speed will be rounded up. If the connector type of the port
|
|
is RS232, the port could be a standard port or a high speed port. If the port is
|
|
a high speed RS232 port, the maximum valid speed is 256000. If the port is a standard
|
|
RS232 port, the maximum valid speed is 64000 on the FRX4000/SS1840 and 19200
|
|
on all other products. It may be possible to set the speed of a standard RS232 port
|
|
to a speed which is valid for a high speed RS232 port but invalid for a standard
|
|
RS232 port. In this case, the port may not end up having the invalid speed. The default
|
|
speed for a standard RS232 port on the FRX6000 is 19200."
|
|
DEFVAL { 64000 }
|
|
::= { portFrEntry 14 }
|
|
|
|
portFrBackupUseOnly OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This object determines whether all DLCIs on the port will
|
|
be reserved exclusively as backups for other DLCIs in the
|
|
same node. If yes is specified for this object, the port
|
|
will remain disabled until needed for backup."
|
|
DEFVAL { no }
|
|
::= { portFrEntry 15 }
|
|
|
|
-- The Frame Relay DLCI Configuration table
|
|
-- The DLCI contains information about the DCLI configured on a FR
|
|
-- port. Note that deleting of a DLCI entry does not affect the existence
|
|
-- of the DLCI for the running protocol. The DLCI record is removed from
|
|
-- the database file, but will remain known to the node until it is
|
|
-- rebooted. This is consistent with the way DLCI information is handled
|
|
-- when configuring through the user interface menu system.
|
|
|
|
portDLCIConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortDLCIEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of DLCI's on Frame Relay ports . The number of
|
|
entries will be the number of DLCIs on all the Frame Relay
|
|
ports on a node."
|
|
::= { portFrGroup 2 }
|
|
|
|
portDLCIEntry OBJECT-TYPE
|
|
SYNTAX PortDLCIEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An Frame Relay Port DLCI entry
|
|
relating to the Rate Control Information that is configurable
|
|
by the user."
|
|
INDEX { portDLCIRlpIndex , portDLCIPortIndex, portDLCIIndex }
|
|
::= { portDLCIConfigTable 1 }
|
|
|
|
PortDLCIEntry ::=
|
|
SEQUENCE {
|
|
portDLCIRlpIndex
|
|
INTEGER,
|
|
portDLCIPortIndex
|
|
INTEGER,
|
|
portDLCIIndex
|
|
INTEGER,
|
|
portDLCIIncomingCIR
|
|
INTEGER,
|
|
portDLCIOutgoingCIR
|
|
INTEGER,
|
|
portDLCIIncomingBc
|
|
INTEGER,
|
|
portDLCIOutgoingBc
|
|
INTEGER,
|
|
portDLCIIncomingBe
|
|
INTEGER,
|
|
portDLCIOutgoingBe
|
|
INTEGER,
|
|
portDLCIBecnRecoveryCnt
|
|
INTEGER,
|
|
portDLCIPriority
|
|
INTEGER,
|
|
portDLCIRowStatus
|
|
RowStatus,
|
|
portDLCIBackupGroup
|
|
INTEGER,
|
|
portDLCIBackupProtEnb
|
|
INTEGER
|
|
}
|
|
portDLCIRlpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The RLP number on which the DLCI is located. The range for
|
|
this is 1-8. "
|
|
::= { portDLCIEntry 1 }
|
|
portDLCIPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The port number on which the DLCI is located. The range for
|
|
this is 1-8 for a physical FR port and 9-64 for a logical FR port. "
|
|
::= { portDLCIEntry 2 }
|
|
portDLCIIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The DLCI number used to identify the entry in the table. The
|
|
range is 16-991. "
|
|
::= { portDLCIEntry 3 }
|
|
portDLCIIncomingCIR OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The committed information rate that is supported on the
|
|
DLCI for incoming data. "
|
|
DEFVAL { 0 }
|
|
::= { portDLCIEntry 4 }
|
|
portDLCIOutgoingCIR OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The committed information rate that is supported on the
|
|
DLCI for outgoing data. "
|
|
DEFVAL { 0 }
|
|
::= { portDLCIEntry 5 }
|
|
portDLCIIncomingBc OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The committed burst size is the maximum amount of data
|
|
to be transmitted under normal conditions within the time
|
|
period defined by Bc/Cir that is supported on the
|
|
DLCI for incoming data. "
|
|
DEFVAL { 0 }
|
|
::= { portDLCIEntry 6 }
|
|
portDLCIOutgoingBc OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The committed burst size is the maximum amount of data
|
|
to be transmitted under normal conditions within the time
|
|
period defined by Bc/Cir that is supported on the
|
|
DLCI for Outgoing data. "
|
|
DEFVAL { 0 }
|
|
::= { portDLCIEntry 7 }
|
|
portDLCIIncomingBe OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32767)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The excess burst size is the maximum amount of incoming data
|
|
in excess of the committed burst size that the network will try to
|
|
transfer during the time interval determined by Bc/Cir on this
|
|
DLCI. "
|
|
DEFVAL { 0 }
|
|
::= { portDLCIEntry 8 }
|
|
portDLCIOutgoingBe OBJECT-TYPE
|
|
SYNTAX INTEGER (0..32767)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The excess burst size is the maximum amount of incoming data
|
|
in excess of the committed burst size that the network will try to
|
|
transfer during the time interval determined by Bc/Cir on this
|
|
DLCI. "
|
|
DEFVAL { 0 }
|
|
::= { portDLCIEntry 9 }
|
|
portDLCIBecnRecoveryCnt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" The BECN recovery Count is a method of controlling the rate
|
|
of return to max traffic flow after it has been reduced due to
|
|
congestion. The value determines the number of packets received
|
|
sequentially without BECN set, before increasing the Excess Burst
|
|
Size by 1/8 of it's configured value. "
|
|
DEFVAL { 0 }
|
|
::= { portDLCIEntry 10 }
|
|
|
|
portDLCIPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This field sets the priority of the DLCI among others on the
|
|
physical port. The range is 0 for lowest priority to 4 for
|
|
the highest priority. "
|
|
DEFVAL { 0 }
|
|
::= { portDLCIEntry 11 }
|
|
|
|
portDLCIRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the portDLCIConfigTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device. For a management
|
|
protocol set operation, a genErr response is returned when
|
|
the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned.
|
|
|
|
Also note that deleting a DLCI entry will only remove it from
|
|
the database file, and it's existence will still be known by
|
|
the protocol until the node is rebooted."
|
|
::= { portDLCIEntry 12 }
|
|
|
|
portDLCIBackupGroup OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specifies (if configured as any number other than
|
|
zero) that this is a primary DLCI, and identifies the backup
|
|
DLCI(s) (in a Frame Relay backup group) that will take over if
|
|
this DLCI fails. This is applicable only on an initiating node,
|
|
which is the node that will initiate the switchover to a backup
|
|
DLCI. At switchover, the initiating node notifies the remote
|
|
node of the change."
|
|
DEFVAL { 0 }
|
|
::= { portDLCIEntry 13 }
|
|
|
|
portDLCIBackupProtEnb OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specifies whether the DLCI will be used as a
|
|
non-initiating backup DLCI. The DLCI will wait for a backup
|
|
protocol message from the initiating end, telling the backup
|
|
where to send the rest of the messages."
|
|
DEFVAL { no }
|
|
::= { portDLCIEntry 14 }
|
|
|
|
-- The Frame Relay Backup Group Configuration table
|
|
|
|
-- A Frame Relay Backup Group is one or more DLCIs (on the same RLP)
|
|
-- that can act as a backup for one or more "primary" DLCIs (also on
|
|
-- the same RLP). If a node detects a failure in a primary DLCI
|
|
-- connection, the software will search any DLCI in the backup group
|
|
-- configured for the primary DLCI, and will select the first
|
|
-- available one as a backup. The backup will become operational and
|
|
-- will remain in that state until the primary becomes active again.
|
|
-- If the backup fails while in use, the software will check the
|
|
-- status of the primary, then (if necessary) search the primary's
|
|
-- backup group for another backup.
|
|
|
|
portFrBackupGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FrBackupEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" A Table describes the Frame Relay Backup MIB . "
|
|
::= { portFrGroup 3 }
|
|
|
|
portFrBackupEntry OBJECT-TYPE
|
|
SYNTAX FrBackupEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This Entry contains the SNMP objects that are used for
|
|
configurating the Frame Relay Backup. "
|
|
INDEX { portFrBackupRLP, portFrBackupPort, portFrBackupDLCI, portFrBackupGroup }
|
|
|
|
::= { portFrBackupGroupTable 1 }
|
|
|
|
FrBackupEntry ::=
|
|
SEQUENCE {
|
|
portFrBackupRLP
|
|
INTEGER,
|
|
portFrBackupPort
|
|
INTEGER,
|
|
portFrBackupDLCI
|
|
INTEGER,
|
|
portFrBackupGroup
|
|
INTEGER,
|
|
portFrBackupWaitTimer
|
|
INTEGER,
|
|
portFrBackupProtEnab
|
|
INTEGER,
|
|
portFrBackupRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
portFrBackupRLP OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This RLP number identifies the RLP containing the
|
|
primary and backup DLCIs. "
|
|
::= { portFrBackupEntry 1 }
|
|
|
|
portFrBackupPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This Port number is the physical port on which
|
|
the backup DLCI is being configured. "
|
|
::= { portFrBackupEntry 2 }
|
|
|
|
portFrBackupDLCI OBJECT-TYPE
|
|
SYNTAX INTEGER (16..991)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This DLCI number is the backup being configured. "
|
|
::= { portFrBackupEntry 3 }
|
|
|
|
portFrBackupGroup OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This Group number is the backup being configured. "
|
|
::= { portFrBackupEntry 4 }
|
|
|
|
portFrBackupWaitTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This is the time after a primary DLCI failure that the
|
|
software will wait for this DLCI to become active before
|
|
checking the next backup DLCI. If the backup does not
|
|
become active before the timer expires, the software will
|
|
search the backup group for the next available backup."
|
|
DEFVAL { 120 }
|
|
::= { portFrBackupEntry 5 }
|
|
|
|
portFrBackupProtEnab OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
" This enables or disables the backup protocol on the specified
|
|
DLCI. It should be set to yes if and only if the remote device
|
|
is an FRX4000 or FRX6000 with the backup protocol enabled on the
|
|
remote DLCI connected to this backup group entry. "
|
|
DEFVAL { no }
|
|
::= { portFrBackupEntry 6 }
|
|
|
|
portFrBackupRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the portFrBackupGroupTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device. For a management
|
|
protocol set operation, a genErr response is returned when
|
|
the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
::= { portFrBackupEntry 7 }
|
|
|
|
portBsciGroup OBJECT IDENTIFIER ::= { port 4 }
|
|
|
|
--
|
|
-- BSC Interactive Port Administrative Table
|
|
--
|
|
|
|
portBsciAdminTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortBsciAdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of BSC Interactive ports . The number of
|
|
entries will be the number of BSC Interactive ports on the node."
|
|
::= { portBsciGroup 1 }
|
|
|
|
portBsciAdminEntry OBJECT-TYPE
|
|
SYNTAX PortBsciAdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A BSCI Interactive Port entry containing objects
|
|
relating to the port that are configurable by the user."
|
|
INDEX { nlIfRlp, nlIfPort }
|
|
::= { portBsciAdminTable 1 }
|
|
|
|
PortBsciAdminEntry ::=
|
|
SEQUENCE {
|
|
portBsciAdminBlockedFlag INTEGER,
|
|
portBsciAdminConnector INTEGER,
|
|
portBsciAdminSpeed INTEGER,
|
|
portBsciAdminRetransmitInterval INTEGER,
|
|
portBsciAdminMAXRetransmits INTEGER,
|
|
portBsciAdminMaxBytesPerFrame INTEGER,
|
|
portBsciAdminGenerateClock INTEGER,
|
|
portBsciAdminRcvClockFromDTE INTEGER,
|
|
portBsciAdminPadType INTEGER,
|
|
portBsciAdminUseEBCDIC INTEGER,
|
|
portBsciAdminCallInfoInRequestPacket INTEGER,
|
|
portBsciAdminClearVCOnLastDeviceDown INTEGER,
|
|
portBsciAdminTransTextSupported INTEGER,
|
|
portBsciAdminEndToEndAck INTEGER,
|
|
portBsciAdminFullDuplex INTEGER,
|
|
portBsciAdminMultidrop INTEGER,
|
|
portBsciAdminSlowPollRetryCount INTEGER,
|
|
portBsciAdminSlowPollRetryFreq INTEGER,
|
|
portBsciAdminStartSynchChars INTEGER,
|
|
portBsciAdminEndPadChars INTEGER,
|
|
portBsciAdminPollInterval INTEGER,
|
|
portBsciAdminNoResponseTimer INTEGER,
|
|
portBsciAdminNoResponseRetryCount INTEGER,
|
|
portBsciAdminErrorRetransmitCount INTEGER,
|
|
portBsciAdminNAKRetryCount INTEGER,
|
|
portBsciAdminBlockCheck INTEGER,
|
|
portBsciAdminDataMode INTEGER,
|
|
portBsciAdminRowStatus RowStatus,
|
|
portBsciAdminAnswerNonConfigured INTEGER,
|
|
portBsciAdminActivateConnectionWithoutPoll INTEGER
|
|
}
|
|
|
|
portBsciAdminBlockedFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Causes the port to be enabled or disabled at node IPL."
|
|
DEFVAL { disabled }
|
|
::= { portBsciAdminEntry 1 }
|
|
|
|
portBsciAdminConnector OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rs232(3),
|
|
v35(5),
|
|
rs449(6),
|
|
rs530(7),
|
|
x21(8),
|
|
t1(10)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Physical port interface connector type."
|
|
::= { portBsciAdminEntry 2 }
|
|
|
|
portBsciAdminSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER (75..19200)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Data transmission rate in bits per second."
|
|
DEFVAL { 9600 }
|
|
::= { portBsciAdminEntry 3 }
|
|
|
|
portBsciAdminRetransmitInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..9999)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Length of time before the node will transmit an I-frame
|
|
if the previous transmission is not acknowledged."
|
|
DEFVAL { 2000}
|
|
::= { portBsciAdminEntry 4 }
|
|
|
|
portBsciAdminMAXRetransmits OBJECT-TYPE
|
|
SYNTAX INTEGER (1..99)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Maximum number of times the node will attempt to send
|
|
an I-frame after a retransmission period expiration."
|
|
DEFVAL { 5 }
|
|
::= { portBsciAdminEntry 5 }
|
|
|
|
portBsciAdminMaxBytesPerFrame OBJECT-TYPE
|
|
SYNTAX INTEGER (25..4105)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Maximum frame size that will be transmitted on the port."
|
|
DEFVAL { 4105 }
|
|
::= { portBsciAdminEntry 6 }
|
|
|
|
portBsciAdminGenerateClock OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies whether the port will generate the clock
|
|
necessary to synchronize traffic over the link."
|
|
DEFVAL { yes }
|
|
::= { portBsciAdminEntry 7 }
|
|
|
|
portBsciAdminRcvClockFromDTE OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Allows the clock to be looped back from the DTE
|
|
using the TT (Terminal Timing) signal."
|
|
DEFVAL { no }
|
|
::= { portBsciAdminEntry 8 }
|
|
|
|
portBsciAdminPadType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tpad(1),
|
|
hpad(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "BSCI Pad Type"
|
|
DEFVAL { tpad }
|
|
::= { portBsciAdminEntry 9 }
|
|
|
|
portBsciAdminUseEBCDIC OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies whether all devices on a line use the same
|
|
character set for successive session polls."
|
|
DEFVAL { yes }
|
|
::= { portBsciAdminEntry 10 }
|
|
|
|
portBsciAdminCallInfoInRequestPacket OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies whether the user will have the option of
|
|
including call information in a call request packet."
|
|
DEFVAL { yes }
|
|
::= { portBsciAdminEntry 11 }
|
|
|
|
portBsciAdminClearVCOnLastDeviceDown OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Causes the virtual circuit to be cleared when no
|
|
terminals are using it."
|
|
DEFVAL { no }
|
|
::= { portBsciAdminEntry 12 }
|
|
|
|
portBsciAdminTransTextSupported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Causes all characters transmitted to be treated as data."
|
|
DEFVAL { no }
|
|
::= { portBsciAdminEntry 13 }
|
|
|
|
portBsciAdminEndToEndAck OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Allows management of acknowledgments end to end across
|
|
the network rather than locally at each end."
|
|
DEFVAL { no }
|
|
::= { portBsciAdminEntry 14 }
|
|
|
|
portBsciAdminFullDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies full-duplex transmission."
|
|
DEFVAL { yes }
|
|
::= { portBsciAdminEntry 15 }
|
|
|
|
portBsciAdminMultidrop OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies whether transmission will be multidrop."
|
|
DEFVAL { no }
|
|
::= { portBsciAdminEntry 16 }
|
|
|
|
portBsciAdminSlowPollRetryCount OBJECT-TYPE
|
|
SYNTAX INTEGER (10..150)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies how many times the control unit will be polled
|
|
before it is put on the slow poll list."
|
|
DEFVAL { 20 }
|
|
::= { portBsciAdminEntry 17 }
|
|
|
|
portBsciAdminSlowPollRetryFreq OBJECT-TYPE
|
|
SYNTAX INTEGER (1..200)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies the number of times active control units will
|
|
be polled between pollings on the slow poll list."
|
|
DEFVAL { 20 }
|
|
::= { portBsciAdminEntry 18 }
|
|
|
|
portBsciAdminStartSynchChars OBJECT-TYPE
|
|
SYNTAX INTEGER (2..10)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies the number of synchronization characters
|
|
that will be added to the beginning of each frame."
|
|
DEFVAL { 2 }
|
|
::= { portBsciAdminEntry 19 }
|
|
|
|
portBsciAdminEndPadChars OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies the number of padding characters that will
|
|
be added to the end of each frame."
|
|
DEFVAL { 1 }
|
|
::= { portBsciAdminEntry 20 }
|
|
|
|
portBsciAdminPollInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (100..1000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies the time between passes through the polling list."
|
|
DEFVAL { 500 }
|
|
::= { portBsciAdminEntry 21 }
|
|
|
|
portBsciAdminNoResponseTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (2..10)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Activated after transmission of a general poll or a
|
|
data frame."
|
|
DEFVAL { 2 }
|
|
::= { portBsciAdminEntry 22 }
|
|
|
|
portBsciAdminNoResponseRetryCount OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies how many times the user device will be polled
|
|
before control is passed on the next cluster."
|
|
DEFVAL { 5 }
|
|
::= { portBsciAdminEntry 23 }
|
|
|
|
portBsciAdminErrorRetransmitCount OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies the number of times the Netlink device will
|
|
resend a block of data after the receiving device has
|
|
detected an error in that block."
|
|
DEFVAL { 5 }
|
|
::= { portBsciAdminEntry 24 }
|
|
|
|
portBsciAdminNAKRetryCount OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies the number of times the Netlink device will
|
|
send a frame when the receiving device is unable to
|
|
acknowledge."
|
|
DEFVAL { 5 }
|
|
::= { portBsciAdminEntry 25 }
|
|
|
|
portBsciAdminBlockCheck OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
crc16(1),
|
|
even-lrc(2),
|
|
odd-lrc(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Sets the redundancy check parameter."
|
|
DEFVAL { even-lrc }
|
|
::= { portBsciAdminEntry 26 }
|
|
|
|
portBsciAdminDataMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
odd-7bit(1),
|
|
even-7bit(2),
|
|
none-8bit(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Sets the parity parameter."
|
|
DEFVAL { none-8bit }
|
|
::= { portBsciAdminEntry 27 }
|
|
|
|
portBsciAdminRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the portBsciAdminTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device, and which is
|
|
supplied by a management station wishing to exercise an
|
|
on-line update of the existing conceptual row. For a
|
|
management protocol set operation, a genErr response is
|
|
returned when the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
::= { portBsciAdminEntry 28 }
|
|
|
|
portBsciAdminAnswerNonConfigured OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Only valid if pad type is HPAD. If yes, the HPAD will
|
|
respond to all devices on the line. If no, the HPAD will
|
|
respond only to those devices that are configured on the
|
|
node."
|
|
DEFVAL { yes }
|
|
::= { portBsciAdminEntry 29 }
|
|
|
|
portBsciAdminActivateConnectionWithoutPoll OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Only valid if pad type is TPAD. If yes, will active the
|
|
TPAD connection without a poll of the connected device."
|
|
DEFVAL { no }
|
|
::= { portBsciAdminEntry 30 }
|
|
|
|
--
|
|
-- BSC Interactive Port Operational Table
|
|
--
|
|
|
|
portBsciOperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortBsciOperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of BSC Interactive ports . The number of
|
|
entries will be the number of BSC Interactive ports on the node."
|
|
::= { portBsciGroup 2 }
|
|
|
|
portBsciOperEntry OBJECT-TYPE
|
|
SYNTAX PortBsciOperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A BSCI Interactive Port entry containing objects
|
|
relating to the port that are configurable by the user."
|
|
INDEX { nlIfRlp, nlIfPort }
|
|
::= { portBsciOperTable 1 }
|
|
|
|
PortBsciOperEntry ::=
|
|
SEQUENCE {
|
|
portBsciOperBlockedFlag INTEGER,
|
|
portBsciOperConnector INTEGER,
|
|
portBsciOperSpeed INTEGER,
|
|
portBsciOperRetransmitInterval INTEGER,
|
|
portBsciOperMAXRetransmits INTEGER,
|
|
portBsciOperMaxBytesPerFrame INTEGER,
|
|
portBsciOperGenerateClock INTEGER,
|
|
portBsciOperRcvClockFromDTE INTEGER,
|
|
portBsciOperPadType INTEGER,
|
|
portBsciOperUseEBCDIC INTEGER,
|
|
portBsciOperCallInfoInRequestPacket INTEGER,
|
|
portBsciOperClearVCOnLastDeviceDown INTEGER,
|
|
portBsciOperTransTextSupported INTEGER,
|
|
portBsciOperEndToEndAck INTEGER,
|
|
portBsciOperFullDuplex INTEGER,
|
|
portBsciOperMultidrop INTEGER,
|
|
portBsciOperSlowPollRetryCount INTEGER,
|
|
portBsciOperSlowPollRetryFreq INTEGER,
|
|
portBsciOperStartSynchChars INTEGER,
|
|
portBsciOperEndPadChars INTEGER,
|
|
portBsciOperPollInterval INTEGER,
|
|
portBsciOperNoResponseTimer INTEGER,
|
|
portBsciOperNoResponseRetryCount INTEGER,
|
|
portBsciOperErrorRetransmitCount INTEGER,
|
|
portBsciOperNAKRetryCount INTEGER,
|
|
portBsciOperBlockCheck INTEGER,
|
|
portBsciOperDataMode INTEGER,
|
|
portBsciOperAnswerNonConfigured INTEGER,
|
|
portBsciOperActivateConnectionWithoutPoll INTEGER
|
|
}
|
|
|
|
portBsciOperBlockedFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Causes the port to be enabled or disabled at node IPL."
|
|
::= { portBsciOperEntry 1 }
|
|
|
|
portBsciOperConnector OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rs232(3),
|
|
v35(5),
|
|
rs449(6),
|
|
rs530(7),
|
|
x21(8),
|
|
t1(10)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Physical port interface connector type."
|
|
::= { portBsciOperEntry 2 }
|
|
|
|
portBsciOperSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Data transmission rate in bits per second."
|
|
::= { portBsciOperEntry 3 }
|
|
|
|
portBsciOperRetransmitInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (1..9999)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Length of time before the node will transmit an I-frame
|
|
if the previous transmission is not acknowledged."
|
|
::= { portBsciOperEntry 4 }
|
|
|
|
portBsciOperMAXRetransmits OBJECT-TYPE
|
|
SYNTAX INTEGER (1..99)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Maximum number of times the node will attempt to send
|
|
an I-frame after a retransmission period expiration."
|
|
::= { portBsciOperEntry 5 }
|
|
|
|
portBsciOperMaxBytesPerFrame OBJECT-TYPE
|
|
SYNTAX INTEGER (25..4105)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Maximum frame size that will be transmitted on the port."
|
|
::= { portBsciOperEntry 6 }
|
|
|
|
portBsciOperGenerateClock OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies whether the port will generate the clock
|
|
necessary to synchronize traffic over the link."
|
|
::= { portBsciOperEntry 7 }
|
|
|
|
portBsciOperRcvClockFromDTE OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Allows the clock to be looped back from the DTE
|
|
using the TT (Terminal Timing) signal."
|
|
::= { portBsciOperEntry 8 }
|
|
|
|
portBsciOperPadType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tpad(1),
|
|
hpad(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "BSCI Pad Type"
|
|
::= { portBsciOperEntry 9 }
|
|
|
|
portBsciOperUseEBCDIC OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies whether all devices on a line use the same
|
|
character set for successive session polls."
|
|
::= { portBsciOperEntry 10 }
|
|
|
|
portBsciOperCallInfoInRequestPacket OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies whether the user will have the option of
|
|
including call information in a call request packet."
|
|
::= { portBsciOperEntry 11 }
|
|
|
|
portBsciOperClearVCOnLastDeviceDown OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Causes the virtual circuit to be cleared when no
|
|
terminals are using it."
|
|
::= { portBsciOperEntry 12 }
|
|
|
|
portBsciOperTransTextSupported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Causes all characters transmitted to be treated as data."
|
|
::= { portBsciOperEntry 13 }
|
|
|
|
portBsciOperEndToEndAck OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Allows management of acknowledgments end to end across
|
|
the network rather than locally at each end."
|
|
::= { portBsciOperEntry 14 }
|
|
|
|
portBsciOperFullDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies full-duplex transmission."
|
|
::= { portBsciOperEntry 15 }
|
|
|
|
portBsciOperMultidrop OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies whether transmission will be multidrop."
|
|
::= { portBsciOperEntry 16 }
|
|
|
|
portBsciOperSlowPollRetryCount OBJECT-TYPE
|
|
SYNTAX INTEGER (10..150)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies how many times the control unit will be polled
|
|
before it is put on the slow poll list."
|
|
::= { portBsciOperEntry 17 }
|
|
|
|
portBsciOperSlowPollRetryFreq OBJECT-TYPE
|
|
SYNTAX INTEGER (1..200)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies the number of times active control units will
|
|
be polled between pollings on the slow poll list."
|
|
::= { portBsciOperEntry 18 }
|
|
|
|
portBsciOperStartSynchChars OBJECT-TYPE
|
|
SYNTAX INTEGER (2..10)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies the number of synchronization characters
|
|
that will be added to the beginning of each frame."
|
|
::= { portBsciOperEntry 19 }
|
|
|
|
portBsciOperEndPadChars OBJECT-TYPE
|
|
SYNTAX INTEGER (1..10)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies the number of padding characters that will
|
|
be added to the end of each frame."
|
|
::= { portBsciOperEntry 20 }
|
|
|
|
portBsciOperPollInterval OBJECT-TYPE
|
|
SYNTAX INTEGER (100..1000)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies the time between passes through the polling list."
|
|
::= { portBsciOperEntry 21 }
|
|
|
|
portBsciOperNoResponseTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (2..10)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Activated after transmission of a general poll or a
|
|
data frame."
|
|
::= { portBsciOperEntry 22 }
|
|
|
|
portBsciOperNoResponseRetryCount OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies how many times the user device will be polled
|
|
before control is passed on the next cluster."
|
|
::= { portBsciOperEntry 23 }
|
|
|
|
portBsciOperErrorRetransmitCount OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies the number of times the Netlink device will
|
|
resend a block of data after the receiving device has
|
|
detected an error in that block."
|
|
::= { portBsciOperEntry 24 }
|
|
|
|
portBsciOperNAKRetryCount OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies the number of times the Netlink device will
|
|
send a frame when the receiving device is unable to
|
|
acknowledge."
|
|
::= { portBsciOperEntry 25 }
|
|
|
|
portBsciOperBlockCheck OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
crc16(1),
|
|
even-lrc(2),
|
|
odd-lrc(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Sets the redundancy check parameter."
|
|
::= { portBsciOperEntry 26 }
|
|
|
|
portBsciOperDataMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
odd-7bit(1),
|
|
even-7bit(2),
|
|
none-8bit(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Sets the parity parameter."
|
|
::= { portBsciOperEntry 27 }
|
|
|
|
portBsciOperAnswerNonConfigured OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Only valid if pad type is HPAD. If yes, the HPAD will
|
|
respond to all devices on the line. If no, the HPAD will
|
|
respond only to those devices that are configured on the
|
|
node."
|
|
::= { portBsciOperEntry 28 }
|
|
|
|
portBsciOperActivateConnectionWithoutPoll OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Only valid if pad type is TPAD. If yes, will active the
|
|
TPAD connection without a poll of the connected device."
|
|
::= { portBsciOperEntry 29 }
|
|
|
|
--
|
|
-- BSCI Port Subscriber Administrative Table
|
|
--
|
|
|
|
bsciSubscrAdminTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsciSubscrAdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of BSC Interactive port subscribers."
|
|
::= { portBsciGroup 3 }
|
|
|
|
bsciSubscrAdminEntry OBJECT-TYPE
|
|
SYNTAX BsciSubscrAdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A BSCI Interactive Port Subscriber entry containing objects
|
|
relating to the port that are configurable by the user."
|
|
INDEX { nlIfRlp, nlIfPort, bsciSubscrAdminSequence }
|
|
::= { bsciSubscrAdminTable 1 }
|
|
|
|
BsciSubscrAdminEntry ::=
|
|
SEQUENCE {
|
|
bsciSubscrAdminSequence INTEGER,
|
|
bsciSubscrAdminLocalID NlSubscriberAddress,
|
|
bsciSubscrAdminRemoteID NlSubscriberAddress,
|
|
bsciSubscrAdminAutocall INTEGER,
|
|
bsciSubscrAdminAutocallRtyTimer INTEGER,
|
|
bsciSubscrAdminAutocallMaxRtry INTEGER,
|
|
bsciSubscrAdminConnectionID INTEGER,
|
|
bsciSubscrAdminRowStatus RowStatus
|
|
}
|
|
|
|
bsciSubscrAdminSequence OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Subscriber index for a specific BSCI port subscriber."
|
|
::= { bsciSubscrAdminEntry 1 }
|
|
|
|
bsciSubscrAdminLocalID OBJECT-TYPE
|
|
SYNTAX NlSubscriberAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Subscriber address of the local end of a BSCI connection."
|
|
::= { bsciSubscrAdminEntry 2 }
|
|
|
|
bsciSubscrAdminRemoteID OBJECT-TYPE
|
|
SYNTAX NlSubscriberAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Subscriber address of the remote end of a BSCI connection."
|
|
::= { bsciSubscrAdminEntry 3 }
|
|
|
|
bsciSubscrAdminAutocall OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Causes a BSCI TPAD to automatically call its HPAD when
|
|
the controller becomes active."
|
|
DEFVAL { no }
|
|
::= { bsciSubscrAdminEntry 4 }
|
|
|
|
bsciSubscrAdminAutocallRtyTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (15..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Time between autocall retries."
|
|
DEFVAL { 60 }
|
|
::= { bsciSubscrAdminEntry 5 }
|
|
|
|
bsciSubscrAdminAutocallMaxRtry OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Maximum number of times an autocall will be sent."
|
|
DEFVAL { 0 }
|
|
::= { bsciSubscrAdminEntry 6 }
|
|
|
|
bsciSubscrAdminConnectionID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Identifier that will link the BSCI port with a device
|
|
configured in the BSCI Devices Table."
|
|
DEFVAL { 0 }
|
|
::= { bsciSubscrAdminEntry 7 }
|
|
|
|
bsciSubscrAdminRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the bsciDevAdminTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device. For a management
|
|
protocol set operation, a genErr response is returned when
|
|
the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
::= { bsciSubscrAdminEntry 8 }
|
|
|
|
--
|
|
-- BSCI Port Subscriber Operational Table
|
|
--
|
|
|
|
bsciSubscrOperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsciSubscrOperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of BSC Interactive port subscribers."
|
|
::= { portBsciGroup 4 }
|
|
|
|
bsciSubscrOperEntry OBJECT-TYPE
|
|
SYNTAX BsciSubscrOperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A BSCI Interactive Port Subscriber entry containing objects
|
|
relating to the port that are configurable by the user."
|
|
INDEX { nlIfRlp, nlIfPort, bsciSubscrOperSequence }
|
|
::= { bsciSubscrOperTable 1 }
|
|
|
|
BsciSubscrOperEntry ::=
|
|
SEQUENCE {
|
|
bsciSubscrOperSequence INTEGER,
|
|
bsciSubscrOperLocalID NlSubscriberAddress,
|
|
bsciSubscrOperRemoteID NlSubscriberAddress,
|
|
bsciSubscrOperAutocall INTEGER,
|
|
bsciSubscrOperAutocallRtyTimer INTEGER,
|
|
bsciSubscrOperAutocallMaxRtry INTEGER,
|
|
bsciSubscrOperConnectionID INTEGER
|
|
}
|
|
|
|
bsciSubscrOperSequence OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Subscriber index for a specific BSCI port subscriber."
|
|
::= { bsciSubscrOperEntry 1 }
|
|
|
|
bsciSubscrOperLocalID OBJECT-TYPE
|
|
SYNTAX NlSubscriberAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Subscriber address of the local end of a BSCI connection."
|
|
::= { bsciSubscrOperEntry 2 }
|
|
|
|
bsciSubscrOperRemoteID OBJECT-TYPE
|
|
SYNTAX NlSubscriberAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Subscriber address of the remote end of a BSCI connection."
|
|
::= { bsciSubscrOperEntry 3 }
|
|
|
|
bsciSubscrOperAutocall OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Causes a BSCI TPAD to automatically call its HPAD when
|
|
the controller becomes active."
|
|
::= { bsciSubscrOperEntry 4 }
|
|
|
|
bsciSubscrOperAutocallRtyTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (15..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Time between autocall retries."
|
|
::= { bsciSubscrOperEntry 5 }
|
|
|
|
bsciSubscrOperAutocallMaxRtry OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Maximum number of times an autocall will be sent."
|
|
::= { bsciSubscrOperEntry 6 }
|
|
|
|
bsciSubscrOperConnectionID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Identifier that will link the BSCI port with a device
|
|
configured in the BSCI Devices Table."
|
|
::= { bsciSubscrOperEntry 7 }
|
|
|
|
--
|
|
-- BSC Interactive Device Administrative Table
|
|
--
|
|
|
|
bsciDevAdminTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsciDevAdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of BSC Interactive devices."
|
|
::= { portBsciGroup 5 }
|
|
|
|
bsciDevAdminEntry OBJECT-TYPE
|
|
SYNTAX BsciDevAdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A BSCI Interactive Device entry containing objects
|
|
relating to the device that are configurable by the user."
|
|
INDEX { nlIfRlp, nlIfPort, bsciDevAdminControlUnitID,
|
|
bsciDevAdminDeviceUnitID }
|
|
::= { bsciDevAdminTable 1 }
|
|
|
|
BsciDevAdminEntry ::=
|
|
SEQUENCE {
|
|
bsciDevAdminControlUnitID INTEGER,
|
|
bsciDevAdminDeviceUnitID INTEGER,
|
|
bsciDevAdminConnectionID INTEGER,
|
|
bsciDevAdminSingleUserVC INTEGER,
|
|
bsciDevAdminTransTextSupported INTEGER,
|
|
bsciDevAdminPrinterAttached INTEGER,
|
|
bsciDevAdminRowStatus RowStatus,
|
|
bsciDevAdminDisableStatusRequest INTEGER
|
|
}
|
|
|
|
bsciDevAdminControlUnitID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Control Unit identifier."
|
|
::= { bsciDevAdminEntry 1 }
|
|
|
|
bsciDevAdminDeviceUnitID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Device Unit identifier."
|
|
::= { bsciDevAdminEntry 2 }
|
|
|
|
bsciDevAdminConnectionID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The BSCI port connection ID for the device."
|
|
DEFVAL { 0 }
|
|
::= { bsciDevAdminEntry 3 }
|
|
|
|
bsciDevAdminSingleUserVC OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies whether each end of the connection is within
|
|
a same Control Unit/Device Type pair."
|
|
DEFVAL { no }
|
|
::= { bsciDevAdminEntry 4 }
|
|
|
|
bsciDevAdminTransTextSupported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Causes all characters transmitted to be treated as data."
|
|
DEFVAL { no }
|
|
::= { bsciDevAdminEntry 5 }
|
|
|
|
bsciDevAdminPrinterAttached OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies whether the device has a printer attached."
|
|
DEFVAL { no }
|
|
::= { bsciDevAdminEntry 6 }
|
|
|
|
bsciDevAdminRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the bsciDevAdminTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device. For a management
|
|
protocol set operation, a genErr response is returned when
|
|
the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
::= { bsciDevAdminEntry 7 }
|
|
|
|
bsciDevAdminDisableStatusRequest OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal (1),
|
|
none (2),
|
|
always-active (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Determines how the BSCI port will report the status
|
|
of the attached device. Normal status- the port will
|
|
report what the device reports. No status- the port will
|
|
report status only if the device is active. Always active
|
|
status- the port will always report the device as active."
|
|
DEFVAL { normal }
|
|
::= { bsciDevAdminEntry 8 }
|
|
|
|
--
|
|
-- BSC Interactive Device Operational Table
|
|
--
|
|
|
|
bsciDevOperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF BsciDevOperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of BSC Interactive devices."
|
|
::= { portBsciGroup 6 }
|
|
|
|
bsciDevOperEntry OBJECT-TYPE
|
|
SYNTAX BsciDevOperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A BSCI Interactive Device entry containing objects
|
|
relating to the device that are configurable by the user."
|
|
INDEX { nlIfRlp, nlIfPort, bsciDevOperControlUnitID,
|
|
bsciDevOperDeviceUnitID }
|
|
::= { bsciDevOperTable 1 }
|
|
|
|
BsciDevOperEntry ::=
|
|
SEQUENCE {
|
|
bsciDevOperControlUnitID INTEGER,
|
|
bsciDevOperDeviceUnitID INTEGER,
|
|
bsciDevOperConnectionID INTEGER,
|
|
bsciDevOperSingleUserVC INTEGER,
|
|
bsciDevOperTransTextSupported INTEGER,
|
|
bsciDevOperPrinterAttached INTEGER,
|
|
bsciDevOperDisableStatusRequest INTEGER
|
|
}
|
|
|
|
bsciDevOperControlUnitID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Control Unit identifier."
|
|
::= { bsciDevOperEntry 1 }
|
|
|
|
bsciDevOperDeviceUnitID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..31)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Device Unit identifier."
|
|
::= { bsciDevOperEntry 2 }
|
|
|
|
bsciDevOperConnectionID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The BSCI port connection ID for the device."
|
|
::= { bsciDevOperEntry 3 }
|
|
|
|
bsciDevOperSingleUserVC OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies whether each end of the connection is within
|
|
a same Control Unit/Device Type pair."
|
|
::= { bsciDevOperEntry 4 }
|
|
|
|
bsciDevOperTransTextSupported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Causes all characters transmitted to be treated as data."
|
|
::= { bsciDevOperEntry 5 }
|
|
|
|
bsciDevOperPrinterAttached OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies whether the device has a printer attached."
|
|
::= { bsciDevOperEntry 6 }
|
|
|
|
bsciDevOperDisableStatusRequest OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
normal (1),
|
|
none (2),
|
|
always-active (3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Determines how the BSCI port will report the status
|
|
of the attached device. Normal status- the port will
|
|
report what the device reports. No status- the port will
|
|
report status only if the device is active. Always active
|
|
status- the port will always report the device as active."
|
|
::= { bsciDevOperEntry 7 }
|
|
|
|
portSdlcGroup OBJECT IDENTIFIER ::= { port 5 }
|
|
|
|
portSdlcAdminTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortSdlcAdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains Netlink Enterprise specific
|
|
objects to manage SDLC port. Changing on of the
|
|
these parameters may take effect in the operating
|
|
port immediately or may wait until the interface is restarted depending on the details of the
|
|
implementation.
|
|
|
|
Most of the objects in this read-write table have
|
|
corresponding read-only objects in the
|
|
portSdlcOperTable that return the current
|
|
operating value.
|
|
|
|
The operating values may be different from these
|
|
configured values if a configured parameter was
|
|
configured afterthe interface was started."
|
|
::= { portSdlcGroup 1 }
|
|
|
|
portSdlcAdminEntry OBJECT-TYPE
|
|
SYNTAX PortSdlcAdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of configured values for an SDLC port."
|
|
INDEX { nlIfRlp, nlIfPort }
|
|
::= { portSdlcAdminTable 1 }
|
|
|
|
PortSdlcAdminEntry ::= SEQUENCE
|
|
{
|
|
portSdlcAdminCommit INTEGER,
|
|
portSdlcAdminMAXRetries INTEGER,
|
|
portSdlcAdminMAXOut INTEGER,
|
|
portSdlcAdminPadType INTEGER,
|
|
portSdlcAdminGenerateClock INTEGER,
|
|
portSdlcAdminRcvClockFromDTE INTEGER,
|
|
portSdlcAdminNrz INTEGER,
|
|
portSdlcAdminPacketSize INTEGER,
|
|
portSdlcAdminDisableRequestDisconnect INTEGER,
|
|
portSdlcAdminLPDASupport INTEGER,
|
|
portSdlcAdminConnector INTEGER,
|
|
portSdlcAdminSpeed INTEGER,
|
|
portSdlcAdminRowStatus RowStatus,
|
|
portSdlcAdminIdleFillChar INTEGER,
|
|
portSdlcAdminInactivityTimer INTEGER,
|
|
portSdlcAdminL1Duplex INTEGER
|
|
}
|
|
|
|
portSdlcAdminCommit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Writing a value to this object commits the
|
|
the SDLC port related modified configuration
|
|
values to the database."
|
|
DEFVAL { 0 }
|
|
::= { portSdlcAdminEntry 1 }
|
|
|
|
portSdlcAdminMAXRetries OBJECT-TYPE
|
|
SYNTAX INTEGER (0..99)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the max. number of retries
|
|
to a non-responding Link station, before putting
|
|
the Link station to slow-poll list if it is not
|
|
Normal response Mode OR disconnecting the link
|
|
station if it is data txfr state."
|
|
|
|
DEFVAL { 5 }
|
|
::= { portSdlcAdminEntry 2 }
|
|
|
|
portSdlcAdminMAXOut OBJECT-TYPE
|
|
SYNTAX INTEGER (1..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the number of outstanding
|
|
frames for triggering window full condition."
|
|
|
|
DEFVAL { 7 }
|
|
::= { portSdlcAdminEntry 3 }
|
|
|
|
portSdlcAdminPadType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
xpad (1),
|
|
tpad (2),
|
|
hpad (3),
|
|
npad (4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the SNA
|
|
PAD types."
|
|
DEFVAL { tpad }
|
|
::= { portSdlcAdminEntry 4 }
|
|
|
|
portSdlcAdminGenerateClock OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines if the port would
|
|
generate clock."
|
|
|
|
DEFVAL { yes }
|
|
::= { portSdlcAdminEntry 5 }
|
|
|
|
portSdlcAdminRcvClockFromDTE OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines if the rcv clock will
|
|
be used from DTE."
|
|
|
|
DEFVAL { no }
|
|
::= { portSdlcAdminEntry 6 }
|
|
|
|
portSdlcAdminNrz OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the data encoding
|
|
at the physical layer"
|
|
|
|
DEFVAL { yes }
|
|
::= { portSdlcAdminEntry 7 }
|
|
|
|
portSdlcAdminPacketSize OBJECT-TYPE
|
|
SYNTAX INTEGER (16..4096)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the packet size of the
|
|
X25 layer used by SNA PAD"
|
|
|
|
DEFVAL { 1024 }
|
|
::= { portSdlcAdminEntry 8 }
|
|
|
|
portSdlcAdminDisableRequestDisconnect OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines if a Request To
|
|
Disconnect(RD) will be sent when remote
|
|
PAD clear the connection"
|
|
|
|
DEFVAL { no }
|
|
::= { portSdlcAdminEntry 9 }
|
|
|
|
portSdlcAdminLPDASupport OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none (1),
|
|
lpda-1 (2),
|
|
lpda-2 (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the type LPDA support
|
|
on SDLC port."
|
|
|
|
DEFVAL { none }
|
|
::= { portSdlcAdminEntry 10 }
|
|
|
|
portSdlcAdminConnector OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
rs232 (3),
|
|
v35 (5),
|
|
rs449 (6),
|
|
rs530 (7),
|
|
x21 (8),
|
|
t1 (10)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the connector type
|
|
of the SDLC port."
|
|
|
|
::= { portSdlcAdminEntry 11 }
|
|
|
|
portSdlcAdminSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER (75..2048000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the speed of the SDLC port. The speed may
|
|
only be set to one of a series of reasonable values, and if an attempt is made
|
|
to set the speed to a value which is within the valid range but not equal to one
|
|
of these values, the speed will be rounded up. If the connector type of the port
|
|
is RS232, the port could be a standard port or a high speed port. If the port is
|
|
a high speed RS232 port, the maximum valid speed is 256000. If the port is a standard
|
|
RS232 port, the maximum valid speed is 64000 on the FRX4000/SS1840 and 19200
|
|
on all other products. It may be possible to set the speed of a standard RS232 port
|
|
to a speed which is valid for a high speed RS232 port but invalid for a standard
|
|
RS232 port. In this case, the port may not end up having the invalid speed. The default
|
|
speed for a standard RS232 port on the FRX6000 is 19200."
|
|
DEFVAL { 64000 }
|
|
::= { portSdlcAdminEntry 12 }
|
|
|
|
portSdlcAdminRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the portSdlcAdminTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device, and which is
|
|
supplied by a management station wishing to exercise an
|
|
on-line update of the existing conceptual row. For a
|
|
management protocol set operation, a genErr response is
|
|
returned when the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
|
|
::= { portSdlcAdminEntry 13 }
|
|
|
|
portSdlcAdminIdleFillChar OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
hex-ff (1),
|
|
hex-7e (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specifies a character that
|
|
wll be inserted into the stream when the
|
|
SNA link is idle."
|
|
DEFVAL { hex-ff }
|
|
::= { portSdlcAdminEntry 14 }
|
|
|
|
portSdlcAdminInactivityTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (15..250)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object determines how long the node
|
|
will wait with no activity on the port
|
|
before it will declare the attached device
|
|
down."
|
|
DEFVAL { 50 }
|
|
::= { portSdlcAdminEntry 15 }
|
|
|
|
portSdlcAdminL1Duplex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
full-duplex (1),
|
|
half-duplex (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object determines whether level-1
|
|
(physical layer) transmission can be in
|
|
one (half duplex) or both (full duplex)
|
|
directions at once."
|
|
DEFVAL { full-duplex }
|
|
::= { portSdlcAdminEntry 16 }
|
|
|
|
portSdlcOperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortSdlcOperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains current Netlink enterprise specific
|
|
port parameters"
|
|
|
|
::= { portSdlcGroup 2 }
|
|
|
|
portSdlcOperEntry OBJECT-TYPE
|
|
SYNTAX PortSdlcOperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of operational values for an SDLC port."
|
|
|
|
INDEX { nlIfRlp, nlIfPort }
|
|
::= { portSdlcOperTable 1 }
|
|
|
|
PortSdlcOperEntry ::= SEQUENCE
|
|
{
|
|
portSdlcOperCommit INTEGER,
|
|
portSdlcOperMAXRetries INTEGER,
|
|
portSdlcOperMAXOut INTEGER,
|
|
portSdlcOperPadType INTEGER,
|
|
portSdlcOperGenerateClock INTEGER,
|
|
portSdlcOperRcvClockFromDTE INTEGER,
|
|
portSdlcOperNrz INTEGER,
|
|
portSdlcOperPacketSize INTEGER,
|
|
portSdlcOperDisableRequestDisconnect INTEGER,
|
|
portSdlcOperLPDASupport INTEGER,
|
|
portSdlcOperConnector INTEGER,
|
|
portSdlcOperSpeed INTEGER,
|
|
portSdlcOperIdleFillChar INTEGER,
|
|
portSdlcOperInactivityTimer INTEGER,
|
|
portSdlcOperL1Duplex INTEGER
|
|
}
|
|
|
|
portSdlcOperCommit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"This object is not used."
|
|
::= { portSdlcOperEntry 1 }
|
|
|
|
portSdlcOperMAXRetries OBJECT-TYPE
|
|
SYNTAX INTEGER (0..99)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the max. number of retries
|
|
to a non-responding Link station, before putting
|
|
the Link station to slow-poll list if it is not
|
|
Normal response Mode OR disconnecting the link
|
|
station if it is data txfr state."
|
|
::= { portSdlcOperEntry 2 }
|
|
|
|
portSdlcOperMAXOut OBJECT-TYPE
|
|
SYNTAX INTEGER (1..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the number of outstanding
|
|
frames for triggering window full condition."
|
|
|
|
::= { portSdlcOperEntry 3 }
|
|
|
|
portSdlcOperPadType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
xpad (1),
|
|
tpad (2),
|
|
hpad (3),
|
|
npad (4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the SNA
|
|
PAD type"
|
|
|
|
::= { portSdlcOperEntry 4 }
|
|
|
|
portSdlcOperGenerateClock OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines if the port would
|
|
generate clock."
|
|
::= { portSdlcOperEntry 5 }
|
|
|
|
portSdlcOperRcvClockFromDTE OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines if the rcv clock will
|
|
be used from DTE."
|
|
::= { portSdlcOperEntry 6 }
|
|
|
|
portSdlcOperNrz OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the data encoding
|
|
at the physical layer"
|
|
::= { portSdlcOperEntry 7 }
|
|
|
|
portSdlcOperPacketSize OBJECT-TYPE
|
|
SYNTAX INTEGER (16..4096)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the packet size of the
|
|
X25 layer used by SNA PAD"
|
|
|
|
::= { portSdlcOperEntry 8 }
|
|
|
|
portSdlcOperDisableRequestDisconnect OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines if a Request To
|
|
Disconnect(RD) will be sent when remote
|
|
PAD clear the connection"
|
|
::= { portSdlcOperEntry 9 }
|
|
|
|
portSdlcOperLPDASupport OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
none (1),
|
|
lpda-1 (2),
|
|
lpda-2 (3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the type LPDA support
|
|
on SDLC port."
|
|
::= { portSdlcOperEntry 10 }
|
|
|
|
portSdlcOperConnector OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
rs232 (3),
|
|
v35 (5),
|
|
rs449 (6),
|
|
rs530 (7),
|
|
x21 (8),
|
|
t1 (10)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the operational
|
|
connector type of the SDLC port."
|
|
|
|
::= { portSdlcOperEntry 11 }
|
|
|
|
portSdlcOperSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the operational speed
|
|
of the SDLC port."
|
|
|
|
::= { portSdlcOperEntry 12 }
|
|
|
|
portSdlcOperIdleFillChar OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
hex-ff (1),
|
|
hex-7e (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object specifies a character that
|
|
wll be inserted into the stream when the
|
|
SNA link is idle."
|
|
::= { portSdlcOperEntry 13 }
|
|
|
|
portSdlcOperInactivityTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (15..250)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object determines how long the node
|
|
will wait with no activity on the port
|
|
before it will declare the attached device
|
|
down."
|
|
::= { portSdlcOperEntry 14 }
|
|
|
|
portSdlcOperL1Duplex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
full-duplex (1),
|
|
half-duplex (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object determines whether level-1
|
|
(physical layer) transmission can be in
|
|
one (half duplex) or both (full duplex)
|
|
directions at once."
|
|
::= { portSdlcOperEntry 15 }
|
|
|
|
-- The lSSdlcAdminTable contains information about the PUs configured on
|
|
-- an SDLC port. Note that deleting of a PU entry does not affect the
|
|
-- existence of the PU for the running protocol. The PU record is removed
|
|
-- from the database file, but will remain known to the node until it is
|
|
-- rebooted or until an online update of the port is performed. This is
|
|
-- consistent with the way PU information is handled when configuring
|
|
-- through the user interface menu system.
|
|
|
|
lSSdlcAdminTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LSSdlcAdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains Enterprise specific Link station
|
|
configurable parameters to manage the link stations."
|
|
|
|
::= { portSdlcGroup 3 }
|
|
|
|
lSSdlcAdminEntry OBJECT-TYPE
|
|
SYNTAX LSSdlcAdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of configured values for an SDLC port."
|
|
|
|
INDEX { nlIfRlp, nlIfPort, sdlcLSAddress }
|
|
::= { lSSdlcAdminTable 1 }
|
|
|
|
LSSdlcAdminEntry ::= SEQUENCE
|
|
{
|
|
lSSdlcAdminLocalSub NlSubscriberAddress,
|
|
lSSdlcAdminRemoteSub NlSubscriberAddress,
|
|
lSSdlcAdminAutoCall INTEGER,
|
|
lSSdlcAdminRetryTime INTEGER,
|
|
lSSdlcAdminRetryCount INTEGER,
|
|
lSSdlcAdminLlc2Conversion INTEGER,
|
|
lSSdlcAdminLPDAResourceID INTEGER,
|
|
lSSdlcAdminRowStatus RowStatus,
|
|
lSSdlcAdminL2DatMode INTEGER
|
|
}
|
|
|
|
lSSdlcAdminLocalSub OBJECT-TYPE
|
|
SYNTAX NlSubscriberAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the local subscriber ID
|
|
of the Link Station"
|
|
|
|
::= { lSSdlcAdminEntry 1 }
|
|
|
|
lSSdlcAdminRemoteSub OBJECT-TYPE
|
|
SYNTAX NlSubscriberAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the remote subscriber ID
|
|
used to connect to remote Link Station"
|
|
::= { lSSdlcAdminEntry 2 }
|
|
|
|
lSSdlcAdminAutoCall OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines if auto call is enabled for
|
|
the link station. If enabled, the link station
|
|
will initiate connection establishment, when
|
|
appropriate. Else, it will passively listen to
|
|
the connection request for establish a connection
|
|
with the remote PAD"
|
|
|
|
DEFVAL { no }
|
|
::= { lSSdlcAdminEntry 3 }
|
|
|
|
lSSdlcAdminRetryTime OBJECT-TYPE
|
|
SYNTAX INTEGER (15..225)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used, only when
|
|
lSSdlcAdminAutoCall object is yes. This defines
|
|
the time interval measured in seconds in which
|
|
the connection request is retried"
|
|
|
|
DEFVAL { 60 }
|
|
::= { lSSdlcAdminEntry 4 }
|
|
|
|
lSSdlcAdminRetryCount OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used, only when
|
|
lSSdlcAdminAutoCall object is yes. This defines
|
|
the number of times the connection initiation
|
|
is retried before given up. The value of Zero(0)
|
|
means to try indefinitely"
|
|
|
|
DEFVAL { 0 }
|
|
::= { lSSdlcAdminEntry 5 }
|
|
|
|
lSSdlcAdminLlc2Conversion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines if this link station
|
|
connects to a LLC2 device/host."
|
|
|
|
DEFVAL { no }
|
|
::= { lSSdlcAdminEntry 6 }
|
|
|
|
lSSdlcAdminLPDAResourceID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This objects the resource ID used during
|
|
LPDA command support"
|
|
|
|
DEFVAL { 0 }
|
|
::= { lSSdlcAdminEntry 7 }
|
|
|
|
lSSdlcAdminRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the lSSdlcAdminTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device. For a management
|
|
protocol set operation, a genErr response is returned when
|
|
the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned.
|
|
|
|
Also note that deleting a PU entry will only remove it from
|
|
the database file, and it's existence will still be known by
|
|
the protocol until the node is rebooted or until an online
|
|
update of the port is performed."
|
|
|
|
::= { lSSdlcAdminEntry 8 }
|
|
|
|
lSSdlcAdminL2DatMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
two-way-alternate (1),
|
|
two-way-simultaneous (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object determines whether transmission
|
|
can be in one (alternate) or two (simultaneous)
|
|
directions at the same time."
|
|
DEFVAL { two-way-alternate }
|
|
::= { lSSdlcAdminEntry 9 }
|
|
|
|
lSSdlcOperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LSSdlcOperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the operational parameters of the
|
|
SDLC port"
|
|
::= { portSdlcGroup 4 }
|
|
|
|
lSSdlcOperEntry OBJECT-TYPE
|
|
SYNTAX LSSdlcOperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of configured values for an SDLC port."
|
|
INDEX { nlIfRlp, nlIfPort, sdlcLSAddress }
|
|
::= { lSSdlcOperTable 1 }
|
|
|
|
LSSdlcOperEntry ::= SEQUENCE
|
|
{
|
|
lSSdlcOperLocalSub NlSubscriberAddress,
|
|
lSSdlcOperRemoteSub NlSubscriberAddress,
|
|
lSSdlcOperAutoCall INTEGER,
|
|
lSSdlcOperRetryTime INTEGER,
|
|
lSSdlcOperRetryCount INTEGER,
|
|
lSSdlcOperLlc2Conversion INTEGER,
|
|
lSSdlcOperLPDAResourceID INTEGER,
|
|
lSSdlcOperL2DatMode INTEGER
|
|
}
|
|
|
|
lSSdlcOperLocalSub OBJECT-TYPE
|
|
SYNTAX NlSubscriberAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the local subscriber ID
|
|
of the Link Station"
|
|
::= { lSSdlcOperEntry 1 }
|
|
|
|
lSSdlcOperRemoteSub OBJECT-TYPE
|
|
SYNTAX NlSubscriberAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the remote subscriber ID
|
|
used to connect to remote Link Station"
|
|
::= { lSSdlcOperEntry 2 }
|
|
|
|
lSSdlcOperAutoCall OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines if auto call is enabled for
|
|
the link station. If enabled, the link station
|
|
will initiate connection establishment, when
|
|
appropriate. Else, it will passively listen to
|
|
the connection request for establish a connection
|
|
with the remote PAD"
|
|
::= { lSSdlcOperEntry 3 }
|
|
|
|
lSSdlcOperRetryTime OBJECT-TYPE
|
|
SYNTAX INTEGER (15..225)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is valid, only when
|
|
lSSdlcAdminAutoCall object is yes. This defines
|
|
the time interval measured in seconds in which
|
|
the connection request is retried"
|
|
::= { lSSdlcOperEntry 4 }
|
|
|
|
lSSdlcOperRetryCount OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is used, only when
|
|
lSSdlcAdminAutoCall object is yes. This defines
|
|
the number of times the connection initiation
|
|
is retried before given up. The value of Zero(0)
|
|
means to try indefinitely"
|
|
::= { lSSdlcOperEntry 5 }
|
|
|
|
lSSdlcOperLlc2Conversion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines if this link station
|
|
connects to a LLC2 device/host."
|
|
::= { lSSdlcOperEntry 6 }
|
|
|
|
lSSdlcOperLPDAResourceID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This objects the resource ID used during
|
|
LPDA command support"
|
|
::= { lSSdlcOperEntry 7 }
|
|
|
|
lSSdlcOperL2DatMode OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
two-way-alternate (1),
|
|
two-way-simultaneous (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object determines whether transmission
|
|
can be in one (alternate) or two (simultaneous)
|
|
directions at the same time."
|
|
::= { lSSdlcOperEntry 8 }
|
|
|
|
lSSdlcLlc2AdminTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LSSdlcLlc2AdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains the LLC2 related parameters
|
|
used to configure LLC2 session, when the SDLC
|
|
station is connected to a LLC2 device at the remote
|
|
end"
|
|
::= { portSdlcGroup 5 }
|
|
|
|
lSSdlcLlc2AdminEntry OBJECT-TYPE
|
|
SYNTAX LSSdlcLlc2AdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of configured values for an SDLC port."
|
|
INDEX { nlIfRlp, nlIfPort, sdlcLSAddress }
|
|
::= { lSSdlcLlc2AdminTable 1 }
|
|
|
|
-- The lSSdlcLlc2AdminTable contains information about the PUs configured
|
|
-- on an SDLC port. Note that deleting of a PU entry does not affect the
|
|
-- existence of the PU for the running protocol. The PU record is removed
|
|
-- from the database file, but will remain known to the node until it is
|
|
-- rebooted or until an online update of the port is performed. This is
|
|
-- consistent with the way PU information is handled when configuring
|
|
-- through the user interface menu system.
|
|
|
|
LSSdlcLlc2AdminEntry ::= SEQUENCE
|
|
{
|
|
lSSdlcLlc2AdminLocalSap INTEGER,
|
|
lSSdlcLlc2AdminLocalMac PhysAddress,
|
|
lSSdlcLlc2AdminIdblk INTEGER,
|
|
lSSdlcLlc2AdminIdnum INTEGER,
|
|
lSSdlcLlc2AdminLanTi INTEGER,
|
|
lSSdlcLlc2AdminLanT1 INTEGER,
|
|
lSSdlcLlc2AdminLanT2 INTEGER,
|
|
lSSdlcLlc2AdminLanN2 INTEGER,
|
|
lSSdlcLlc2AdminLanN3 INTEGER,
|
|
lSSdlcLlc2AdminLanTw INTEGER,
|
|
lSSdlcLlc2AdminBAG INTEGER,
|
|
lSSdlcLlc2AdminPriority INTEGER,
|
|
lSSdlcLlc2AdminRowStatus RowStatus,
|
|
lSSdlcLlc2AdminSuppressXID INTEGER
|
|
}
|
|
|
|
lSSdlcLlc2AdminLocalSap OBJECT-TYPE
|
|
SYNTAX INTEGER (0..252)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines Local SAP
|
|
address (multiple of 4)"
|
|
DEFVAL { 4 }
|
|
::= { lSSdlcLlc2AdminEntry 1 }
|
|
|
|
lSSdlcLlc2AdminLocalMac OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the local MAC address"
|
|
DEFVAL { '000000000000'H } -- 00:00:00:00:00:00
|
|
::= { lSSdlcLlc2AdminEntry 2 }
|
|
|
|
lSSdlcLlc2AdminIdblk OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines idblk used in XID"
|
|
DEFVAL { 0 }
|
|
::= { lSSdlcLlc2AdminEntry 3 }
|
|
|
|
lSSdlcLlc2AdminIdnum OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1048575)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines idnum used in XID"
|
|
DEFVAL { 0 }
|
|
::= { lSSdlcLlc2AdminEntry 4 }
|
|
|
|
lSSdlcLlc2AdminLanTi OBJECT-TYPE
|
|
SYNTAX INTEGER (1..50)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines LLC2 inactivity timer
|
|
measured in units of seconds"
|
|
DEFVAL { 30 }
|
|
::= { lSSdlcLlc2AdminEntry 5 }
|
|
|
|
lSSdlcLlc2AdminLanT1 OBJECT-TYPE
|
|
SYNTAX INTEGER (1..250)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines LLC2 reply timer
|
|
measured in units of 100 milliseconds"
|
|
DEFVAL { 10 }
|
|
::= { lSSdlcLlc2AdminEntry 6 }
|
|
|
|
lSSdlcLlc2AdminLanT2 OBJECT-TYPE
|
|
SYNTAX INTEGER (100..5000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines Receiver Ack Timer
|
|
measured in units of milliseconds"
|
|
DEFVAL { 100 }
|
|
::= { lSSdlcLlc2AdminEntry 7 }
|
|
|
|
lSSdlcLlc2AdminLanN2 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines Maximum Retransmissions"
|
|
DEFVAL { 8 }
|
|
::= { lSSdlcLlc2AdminEntry 8 }
|
|
|
|
lSSdlcLlc2AdminLanN3 OBJECT-TYPE
|
|
SYNTAX INTEGER (1..127)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines count of I-format LPDU's
|
|
before sending Ack"
|
|
|
|
DEFVAL { 3 }
|
|
::= { lSSdlcLlc2AdminEntry 9 }
|
|
|
|
lSSdlcLlc2AdminLanTw OBJECT-TYPE
|
|
SYNTAX INTEGER (1..127)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines Outstanding Frames"
|
|
DEFVAL { 7 }
|
|
::= { lSSdlcLlc2AdminEntry 10 }
|
|
|
|
lSSdlcLlc2AdminBAG OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines bandwidth allocation
|
|
group"
|
|
DEFVAL { 0 }
|
|
::= { lSSdlcLlc2AdminEntry 11 }
|
|
|
|
lSSdlcLlc2AdminPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..9)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines priority for traffic
|
|
within the node"
|
|
DEFVAL { 0 }
|
|
::= { lSSdlcLlc2AdminEntry 12 }
|
|
|
|
lSSdlcLlc2AdminRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the lSSdlcLlc2AdminTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device. For a management
|
|
protocol set operation, a genErr response is returned when
|
|
the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned.
|
|
|
|
Also note that deleting a PU entry will only remove it from
|
|
the database file, and it's existence will still be known by
|
|
the protocol until the node is rebooted or until an online
|
|
update of the port is performed."
|
|
::= { lSSdlcLlc2AdminEntry 13 }
|
|
|
|
lSSdlcLlc2AdminSuppressXID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object prevents (if yes) the returning
|
|
of an XID in response to a null XID. This
|
|
might be desirable if the remote TPAD is not
|
|
running PU 2.1. It should be noted that even
|
|
if an XID is sent, an SNRM (Set Normal
|
|
Response Mode) immediately follows, so the
|
|
connection will be established."
|
|
DEFVAL { no }
|
|
::= { lSSdlcLlc2AdminEntry 14 }
|
|
|
|
lSSdlcLlc2OperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF LSSdlcLlc2OperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This table contains operartional parameters related
|
|
to LLC2 session of this link station."
|
|
::= { portSdlcGroup 6 }
|
|
|
|
lSSdlcLlc2OperEntry OBJECT-TYPE
|
|
SYNTAX LSSdlcLlc2OperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of configured values for an SDLC port."
|
|
INDEX { nlIfRlp, nlIfPort, sdlcLSAddress }
|
|
::= { lSSdlcLlc2OperTable 1 }
|
|
|
|
LSSdlcLlc2OperEntry ::= SEQUENCE
|
|
{
|
|
lSSdlcLlc2OperLocalSap INTEGER,
|
|
lSSdlcLlc2OperLocalMac PhysAddress,
|
|
lSSdlcLlc2OperIdblk INTEGER,
|
|
lSSdlcLlc2OperIdnum INTEGER,
|
|
lSSdlcLlc2OperLanTi INTEGER,
|
|
lSSdlcLlc2OperLanT1 INTEGER,
|
|
lSSdlcLlc2OperLanT2 INTEGER,
|
|
lSSdlcLlc2OperLanN2 INTEGER,
|
|
lSSdlcLlc2OperLanN3 INTEGER,
|
|
lSSdlcLlc2OperLanTw INTEGER,
|
|
lSSdlcLlc2OperBAG INTEGER,
|
|
lSSdlcLlc2OperPriority INTEGER,
|
|
lSSdlcLlc2OperSuppressXID INTEGER
|
|
}
|
|
|
|
lSSdlcLlc2OperLocalSap OBJECT-TYPE
|
|
SYNTAX INTEGER (0..252)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines Local SAP
|
|
address (multiple of 4)"
|
|
::= { lSSdlcLlc2OperEntry 1 }
|
|
|
|
lSSdlcLlc2OperLocalMac OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines the local MAC address"
|
|
::= { lSSdlcLlc2OperEntry 2 }
|
|
|
|
lSSdlcLlc2OperIdblk OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines idblk used in XID"
|
|
::= { lSSdlcLlc2OperEntry 3 }
|
|
|
|
lSSdlcLlc2OperIdnum OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1048575)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines idnum used in XID"
|
|
::= { lSSdlcLlc2OperEntry 4 }
|
|
|
|
lSSdlcLlc2OperLanTi OBJECT-TYPE
|
|
SYNTAX INTEGER (1..50)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines LLC2 inactivity timer
|
|
measured in units of seconds"
|
|
::= { lSSdlcLlc2OperEntry 5 }
|
|
|
|
lSSdlcLlc2OperLanT1 OBJECT-TYPE
|
|
SYNTAX INTEGER (1..250)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines LLC2 reply timer
|
|
measured in units of 100 milliseconds"
|
|
::= { lSSdlcLlc2OperEntry 6 }
|
|
|
|
lSSdlcLlc2OperLanT2 OBJECT-TYPE
|
|
SYNTAX INTEGER (100..5000)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines Receiver Ack Timer
|
|
measured in units of milliseconds"
|
|
::= { lSSdlcLlc2OperEntry 7 }
|
|
|
|
lSSdlcLlc2OperLanN2 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines Maximum Retransmissions"
|
|
::= { lSSdlcLlc2OperEntry 8 }
|
|
|
|
lSSdlcLlc2OperLanN3 OBJECT-TYPE
|
|
SYNTAX INTEGER (1..127)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines count of I-format LPDU's
|
|
before sending Ack"
|
|
::= { lSSdlcLlc2OperEntry 9 }
|
|
|
|
lSSdlcLlc2OperLanTw OBJECT-TYPE
|
|
SYNTAX INTEGER (1..127)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines Outstanding Frames"
|
|
::= { lSSdlcLlc2OperEntry 10 }
|
|
|
|
lSSdlcLlc2OperBAG OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines bandwidth allocation
|
|
group"
|
|
::= { lSSdlcLlc2OperEntry 11 }
|
|
|
|
lSSdlcLlc2OperPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..9)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object defines priority for traffic
|
|
within the node"
|
|
::= { lSSdlcLlc2OperEntry 12 }
|
|
|
|
lSSdlcLlc2OperSuppressXID OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object prevents (if yes) the returning
|
|
of an XID in response to a null XID. This
|
|
might be desirable if the remote TPAD is not
|
|
running PU 2.1. It should be noted that even
|
|
if an XID is sent, an SNRM (Set Normal
|
|
Response Mode) immediately follows, so the
|
|
connection will be established."
|
|
::= { lSSdlcLlc2OperEntry 13 }
|
|
|
|
portT1Group OBJECT IDENTIFIER ::= { port 7 }
|
|
|
|
portT1AdminTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortT1AdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "The configuration information pertaining to a T1 port.
|
|
T1 ports can operate at full T1 bandwidth or DS0A channelized which provides
|
|
24 separate channels."
|
|
::= { portT1Group 1 }
|
|
|
|
portT1AdminEntry OBJECT-TYPE
|
|
SYNTAX PortT1AdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A T1 port entry containing objects relating to T1 ports."
|
|
INDEX { nlIfRlp, nlIfPort }
|
|
::= { portT1AdminTable 1 }
|
|
|
|
PortT1AdminEntry ::=
|
|
SEQUENCE {
|
|
portT1AdminBlockedPortFlag INTEGER,
|
|
portT1AdminGenerateClock INTEGER,
|
|
portT1AdminFramingMode INTEGER,
|
|
portT1AdminFrameModelSelect INTEGER,
|
|
portT1AdminLineEncoding INTEGER,
|
|
portT1AdminLineBuildOut INTEGER,
|
|
portT1AdminRowStatus RowStatus,
|
|
portT1AdminProtocolFraming INTEGER,
|
|
portT1AdminNRZI INTEGER
|
|
}
|
|
|
|
portT1AdminBlockedPortFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { portT1AdminEntry 1 }
|
|
|
|
portT1AdminGenerateClock OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { portT1AdminEntry 2 }
|
|
|
|
portT1AdminFramingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fullT1(1),
|
|
ds0aT1(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies how this T1 port is to function. ds0AT1 specifies a
|
|
24 channelized T1."
|
|
::= { portT1AdminEntry 3 }
|
|
|
|
portT1AdminFrameModelSelect OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
d4(1),
|
|
esf(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { portT1AdminEntry 4 }
|
|
|
|
portT1AdminLineEncoding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
b8zs(1),
|
|
ami(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { portT1AdminEntry 5 }
|
|
|
|
portT1AdminLineBuildOut OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
zerodb(1),
|
|
x133-266ft(2),
|
|
x266-399ft(3),
|
|
x399-533ft(4),
|
|
x533-655ft(5),
|
|
minus7p5db(6),
|
|
minus15db(7),
|
|
minus22p5db(8)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { portT1AdminEntry 6 }
|
|
|
|
portT1AdminRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { portT1AdminEntry 7 }
|
|
|
|
portT1AdminProtocolFraming OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sync(1),
|
|
bisync(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { portT1AdminEntry 8 }
|
|
|
|
portT1AdminNRZI OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { portT1AdminEntry 9 }
|
|
|
|
portT1OperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortT1OperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "The configuration information pertaining to a T1 port.
|
|
T1 ports can operate at full T1 bandwidth or DS0A channelized which provides
|
|
24 separate channels."
|
|
::= { portT1Group 2 }
|
|
|
|
portT1OperEntry OBJECT-TYPE
|
|
SYNTAX PortT1OperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A T1 port entry containing objects relating to T1 ports."
|
|
INDEX { nlIfRlp, nlIfPort }
|
|
::= { portT1OperTable 1 }
|
|
|
|
PortT1OperEntry ::=
|
|
SEQUENCE {
|
|
portT1OperBlockedPortFlag INTEGER,
|
|
portT1OperGenerateClock INTEGER,
|
|
portT1OperFramingMode INTEGER,
|
|
portT1OperFrameModelSelect INTEGER,
|
|
portT1OperLineEncoding INTEGER,
|
|
portT1OperLineBuildOut INTEGER,
|
|
portT1OperProtocolFraming INTEGER,
|
|
portT1OperNRZI INTEGER
|
|
}
|
|
|
|
portT1OperBlockedPortFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { portT1OperEntry 1 }
|
|
|
|
portT1OperGenerateClock OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { portT1OperEntry 2 }
|
|
|
|
portT1OperFramingMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
fullT1(1),
|
|
ds0aT1(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies how this T1 port is to function. ds0AT1 specifies a
|
|
24 channelized T1."
|
|
::= { portT1OperEntry 3 }
|
|
|
|
portT1OperFrameModelSelect OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
d4(1),
|
|
esf(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { portT1OperEntry 4 }
|
|
|
|
portT1OperLineEncoding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
b8zs(1),
|
|
ami(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { portT1OperEntry 5 }
|
|
|
|
portT1OperLineBuildOut OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
zerodb(1),
|
|
x133-266ft(2),
|
|
x266-399ft(3),
|
|
x399-533ft(4),
|
|
x533-655ft(5),
|
|
minus7p5db(6),
|
|
minus15db(7),
|
|
minus22p5db(8)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { portT1OperEntry 6 }
|
|
|
|
portT1OperProtocolFraming OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sync(1),
|
|
bisync(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { portT1OperEntry 7 }
|
|
|
|
portT1OperNRZI OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
::= { portT1OperEntry 8 }
|
|
|
|
portVoiceGroup OBJECT IDENTIFIER ::= { port 8 }
|
|
|
|
--
|
|
-- The Voice Port Administrative table
|
|
--
|
|
|
|
portVoiceAdminTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortVoiceAdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of Voice ports. The number of entries
|
|
will be the number of Voice ports on the node."
|
|
::= { portVoiceGroup 1 }
|
|
|
|
portVoiceAdminEntry OBJECT-TYPE
|
|
SYNTAX PortVoiceAdminEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A Voice Port entry containing objects relating
|
|
to the port that are configurable by the user."
|
|
INDEX { portVoiceAdminRlpIndex, portVoiceAdminPortIndex }
|
|
::= { portVoiceAdminTable 1 }
|
|
|
|
PortVoiceAdminEntry ::=
|
|
SEQUENCE {
|
|
portVoiceAdminRlpIndex
|
|
INTEGER,
|
|
portVoiceAdminPortIndex
|
|
INTEGER,
|
|
portVoiceAdminBlockedFlag
|
|
INTEGER,
|
|
portVoiceAdminSpeed
|
|
INTEGER,
|
|
portVoiceAdminDTMF
|
|
INTEGER,
|
|
portVoiceAdminInterface
|
|
INTEGER,
|
|
portVoiceAdminTETimer
|
|
INTEGER,
|
|
portVoiceAdminLevelIn
|
|
INTEGER,
|
|
portVoiceAdminLevelOut
|
|
INTEGER,
|
|
portVoiceAdminCallTimer
|
|
INTEGER,
|
|
portVoiceAdminHuntGroup
|
|
INTEGER,
|
|
portVoiceAdminLongDialPrefix
|
|
OCTET STRING,
|
|
portVoiceAdminSLTTimeout
|
|
INTEGER,
|
|
portVoiceAdminLinkDownBusy
|
|
INTEGER,
|
|
portVoiceAdminFaxSupported
|
|
INTEGER,
|
|
portVoiceAdminTelephonyType
|
|
INTEGER,
|
|
portVoiceAdminJitter
|
|
INTEGER,
|
|
portVoiceAdminSampleDelay
|
|
INTEGER,
|
|
portVoiceAdminDialTimer
|
|
INTEGER,
|
|
portVoiceAdminAutoDial
|
|
INTEGER,
|
|
portVoiceAdminSuppression
|
|
INTEGER,
|
|
portVoiceAdminAutoDialNumber
|
|
OCTET STRING,
|
|
portVoiceAdminAutoPoll
|
|
INTEGER,
|
|
portVoiceAdminAutoPollTimer
|
|
INTEGER,
|
|
portVoiceAdminExtDigitsSource
|
|
INTEGER,
|
|
portVoiceAdminNumDigitsDelete
|
|
INTEGER,
|
|
portVoiceAdminForwardDelay
|
|
INTEGER,
|
|
portVoiceAdminForwardedType
|
|
INTEGER,
|
|
portVoiceAdminForwardedDigits
|
|
INTEGER,
|
|
portVoiceAdminMakeRatio
|
|
INTEGER,
|
|
portVoiceAdminBreakRatio
|
|
INTEGER,
|
|
portVoiceAdminDTMFOnDuration
|
|
INTEGER,
|
|
portVoiceAdminDTMFOffDuration
|
|
INTEGER,
|
|
portVoiceAdminToneType
|
|
INTEGER,
|
|
portVoiceAdminRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
portVoiceAdminRlpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The RLP number of the Voice port."
|
|
::= { portVoiceAdminEntry 1 }
|
|
|
|
portVoiceAdminPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Port number of the Voice port."
|
|
::= { portVoiceAdminEntry 2 }
|
|
|
|
portVoiceAdminBlockedFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The flag which causes the port to be enabled or disabled
|
|
at node IPL. The port will remain in that state until this
|
|
flag is changed and the node is rebooted, or until an on-
|
|
line enable or disable is performed."
|
|
DEFVAL { disabled }
|
|
::= { portVoiceAdminEntry 3 }
|
|
|
|
portVoiceAdminSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bps-4800 (1),
|
|
bps-8000 (2),
|
|
bps-32000 (3),
|
|
bps-64000 (4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The speed of the port which is transmitted as part
|
|
of a Call Setup frame. A Voice call will be established
|
|
if there is enough bandwidth at each end to provide the
|
|
minimum configured rate."
|
|
DEFVAL { bps-8000 }
|
|
::= { portVoiceAdminEntry 4 }
|
|
|
|
portVoiceAdminDTMF OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The flag to enable, disable, or specify a time span
|
|
over which DTMF (Dual Tone Multi Frequency) tones will
|
|
be regenerated.
|
|
0 = pass tones transparently to the remote device.
|
|
1 = detect incoming tones and regenerate as received.
|
|
2-255 = regenerate tones for the specified seconds."
|
|
DEFVAL { 1 }
|
|
::= { portVoiceAdminEntry 5 }
|
|
|
|
portVoiceAdminInterface OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
em-4w (1),
|
|
em-2w (2),
|
|
loop-start (3),
|
|
ac15-a (4),
|
|
ac15-b (6),
|
|
em-4w-te (10),
|
|
em-2w-te (11)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of interface (in conjunction with the Telephony
|
|
Interface Type) that will be used by the Voice channel.
|
|
This requires rebooting for the change to take effect.
|
|
Telephony Type Interface Type
|
|
-------------- --------------
|
|
OPX (FXO) Loop Start
|
|
SLT (FXS) Loop Start
|
|
E&M 4W E&M, 4W E&M TE, 2W E&M, 2W E&M TE
|
|
AC15 AC15A, AC15C"
|
|
DEFVAL { loop-start }
|
|
::= { portVoiceAdminEntry 6 }
|
|
|
|
portVoiceAdminTETimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The delay at which the E&M 'E' lead follows the 'M' lead."
|
|
DEFVAL { 3 }
|
|
::= { portVoiceAdminEntry 7 }
|
|
|
|
portVoiceAdminLevelIn OBJECT-TYPE
|
|
SYNTAX INTEGER (-22..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The local voice level into the voice port. This adjusts
|
|
the sensitivity of the local voice channel to the signal
|
|
from the attached device. The purpose of this is to match
|
|
the voice channel dB level to the input signal. A more
|
|
negative setting produces a higher input gain. If the level
|
|
is reduced, the voice channel will be more sensitive to the
|
|
input. This will also cause the voice output at the remote
|
|
device to sound louder."
|
|
DEFVAL { 0 }
|
|
::= { portVoiceAdminEntry 8 }
|
|
|
|
portVoiceAdminLevelOut OBJECT-TYPE
|
|
SYNTAX INTEGER (-22..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The local voice level out of the voice port. A more
|
|
positive setting produces a higher volume."
|
|
DEFVAL { -4 }
|
|
::= { portVoiceAdminEntry 9 }
|
|
|
|
portVoiceAdminCallTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (1..30)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The amount of time the node will wait for a response to a
|
|
Call Connect or Call Clear request. When the node issues a
|
|
request, it will set a timer to the value configured here.
|
|
If that timer expires with no response from the destination,
|
|
the node will generate a busy tone."
|
|
DEFVAL { 5 }
|
|
::= { portVoiceAdminEntry 10 }
|
|
|
|
portVoiceAdminHuntGroup OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
a (2),
|
|
b (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The hunt group that includes the voice channel."
|
|
DEFVAL { none }
|
|
::= { portVoiceAdminEntry 11 }
|
|
|
|
portVoiceAdminLongDialPrefix OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The character that will be required preceeding calls using
|
|
the long call format. When the user at an attached device
|
|
dials a long form number, it must be preceeded by the prefix
|
|
character specified here."
|
|
DEFVAL { '2A'H }
|
|
::= { portVoiceAdminEntry 12 }
|
|
|
|
portVoiceAdminSLTTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (1..99)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time the local port will wait before an actual fax
|
|
transmission begins. If there is no fax tone when this
|
|
timer expires, the connection will be terminated."
|
|
DEFVAL { 30 }
|
|
::= { portVoiceAdminEntry 13 }
|
|
|
|
portVoiceAdminLinkDownBusy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This flag enables or disables automatic busy-out of
|
|
channels when the link is down. When enabled, the system
|
|
will automatically busy-out channels when the composite
|
|
link is down. When disabled, channels remain on-hook when
|
|
the link is down. If your application is connected to a
|
|
PBX that can route calls to another alternate source based
|
|
on an all busy condition, enable this so the PBX will
|
|
recognize this condition and reroute the calls while the
|
|
composite link is down."
|
|
DEFVAL { enabled }
|
|
::= { portVoiceAdminEntry 14 }
|
|
|
|
portVoiceAdminFaxSupported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The flag to indicate whether or not faxes will be
|
|
transmitted on the port. If no, all calls will be treated
|
|
as voice. If yes, both voice and fax will be transmitted."
|
|
DEFVAL { yes }
|
|
::= { portVoiceAdminEntry 15 }
|
|
|
|
portVoiceAdminTelephonyType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
opx (1),
|
|
slt (2),
|
|
em (3),
|
|
ac15 (4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of interface (in conjunction with the
|
|
Interface Type) that will be used by the Voice channel.
|
|
This requires rebooting for the change to take effect.
|
|
Telephony Type Interface Type
|
|
-------------- --------------
|
|
OPX (FXO) Loop Start
|
|
SLT (FXS) Loop Start
|
|
E&M 4W E&M, 4W E&M TE, 2W E&M, 2W E&M TE
|
|
AC15 AC15A, AC15C"
|
|
DEFVAL { opx }
|
|
::= { portVoiceAdminEntry 16 }
|
|
|
|
portVoiceAdminJitter OBJECT-TYPE
|
|
SYNTAX INTEGER (10..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The amount of jitter delay."
|
|
DEFVAL { 80 }
|
|
::= { portVoiceAdminEntry 17 }
|
|
|
|
portVoiceAdminSampleDelay OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The amount of sample delay."
|
|
DEFVAL { 10 }
|
|
::= { portVoiceAdminEntry 18 }
|
|
|
|
portVoiceAdminDialTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The delay the node will use to determine when variable
|
|
length dialing is complete. (Variable length dialing allows
|
|
the user to place a call without entering the configured
|
|
number of digits for the speed dial number.)"
|
|
DEFVAL { 5 }
|
|
::= { portVoiceAdminEntry 19 }
|
|
|
|
portVoiceAdminAutoDial OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The flag to enable or disable the auto dial feature. Note
|
|
that enabling this feature will disable the variable length
|
|
dialing feature for this channel."
|
|
DEFVAL { disabled }
|
|
::= { portVoiceAdminEntry 20 }
|
|
|
|
portVoiceAdminSuppression OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
very-low (1),
|
|
low (2),
|
|
medium (3),
|
|
high (4),
|
|
very-high (5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The silence suppression level. A larger silence suppression
|
|
level allows more data channels to operate simultaneously
|
|
with the voice channels."
|
|
DEFVAL { low }
|
|
::= { portVoiceAdminEntry 21 }
|
|
|
|
portVoiceAdminAutoDialNumber OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..4))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number to which the node will attempt to connect when
|
|
the handset attached to this port is taken off-hook. This
|
|
is applicable only when the Auto Dial feature is enabled."
|
|
::= { portVoiceAdminEntry 22 }
|
|
|
|
portVoiceAdminAutoPoll OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The flag to enable or disable auto polling. This is
|
|
applicable only when the Auto Dial feature is enabled.
|
|
When enabled, the node periodically polls the destination.
|
|
If the poll is not acknowledged, the node will busy-out
|
|
the channel. This can be useful in situations where the
|
|
destination is an emergency number that must always be
|
|
available. If the destination does not answer the automatic
|
|
poll, the busy-out condition will notify an attached PBX
|
|
that the emergency call should be routed to another call
|
|
routing device."
|
|
DEFVAL { disabled }
|
|
::= { portVoiceAdminEntry 23 }
|
|
|
|
portVoiceAdminAutoPollTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (5..30)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The frequency with which an Auto Poll will be sent. This
|
|
is applicable only when auto poll is enabled."
|
|
DEFVAL { 10 }
|
|
::= { portVoiceAdminEntry 24 }
|
|
|
|
portVoiceAdminExtDigitsSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
map (1),
|
|
user (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The source of the extended digits when the user of
|
|
attached equipment dials a speed dial number. This is
|
|
applicable only when the number of extended dial digits
|
|
is greater than zero. When map is specified, extended
|
|
digits are taken from the extended digits field in the
|
|
map table. When user is specified, extended digits are
|
|
taken from the user of attached equipment."
|
|
DEFVAL { map }
|
|
::= { portVoiceAdminEntry 25 }
|
|
|
|
portVoiceAdminNumDigitsDelete OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of leading dial digits that will be deleted
|
|
before a dial string is forwarded. This is primarily used
|
|
to delete leading dial digits that may be inserted by an
|
|
attached PBX."
|
|
DEFVAL { 0 }
|
|
::= { portVoiceAdminEntry 26 }
|
|
|
|
portVoiceAdminForwardDelay OBJECT-TYPE
|
|
SYNTAX INTEGER (0..40)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The length of a pause that can be inserted in an extended
|
|
dial string that is being forwarded. This is applicable only
|
|
when forwarded output digits is all or extended. When a comma
|
|
is encountered in an extended digits string, the node will
|
|
pause for the length of time specified here before additional
|
|
extended digits are forwarded."
|
|
DEFVAL { 2 }
|
|
::= { portVoiceAdminEntry 27 }
|
|
|
|
portVoiceAdminForwardedType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dtmf (1),
|
|
pulse (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The method how the dial digits will be forwarded. This
|
|
is applicable only when forwarded output digits is all
|
|
or extended."
|
|
DEFVAL { dtmf }
|
|
::= { portVoiceAdminEntry 28 }
|
|
|
|
portVoiceAdminForwardedDigits OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
all (2),
|
|
extended (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The flag indicating which dial digits, if any, to forward.
|
|
If none, dial digits are not forwarded to the destination
|
|
device when a call is initiated on this channel. If all,
|
|
the dialed speed dial number and associated extended digits
|
|
are forwarded to the destination device. If extended, only
|
|
the extended digit string is forwarded."
|
|
DEFVAL { none }
|
|
::= { portVoiceAdminEntry 29 }
|
|
|
|
portVoiceAdminMakeRatio OBJECT-TYPE
|
|
SYNTAX INTEGER (20..80)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The make ratio of each digit pulse that is forwarded.
|
|
This is applicable only when forwarded output digits
|
|
is all or extended and forwarded digit type is pulse."
|
|
DEFVAL { 34 }
|
|
::= { portVoiceAdminEntry 30 }
|
|
|
|
portVoiceAdminBreakRatio OBJECT-TYPE
|
|
SYNTAX INTEGER (20..80)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The break ratio of each digit pulse that is forwarded.
|
|
This is applicable only when forwarded output digits
|
|
is all or extended and forwarded digit type is pulse."
|
|
DEFVAL { 66 }
|
|
::= { portVoiceAdminEntry 31 }
|
|
|
|
portVoiceAdminDTMFOnDuration OBJECT-TYPE
|
|
SYNTAX INTEGER (30..1000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The length of a tone that will be used to produce a
|
|
single DTMF digit. This is applicable only when forwarded
|
|
output digits is all or extended and forwarded digit type
|
|
is DTMF."
|
|
DEFVAL { 100 }
|
|
::= { portVoiceAdminEntry 32 }
|
|
|
|
portVoiceAdminDTMFOffDuration OBJECT-TYPE
|
|
SYNTAX INTEGER (30..1000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The length of silence between DTMF tones in a dial digit
|
|
string. This is applicable only when forwarded output digits
|
|
is all or extended and forwarded digit type is DTMF."
|
|
DEFVAL { 100 }
|
|
::= { portVoiceAdminEntry 33 }
|
|
|
|
portVoiceAdminToneType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dtmf (1),
|
|
mf (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The tone type to detect/regenerate for forwarding DTMF/MF."
|
|
DEFVAL { dtmf }
|
|
::= { portVoiceAdminEntry 34 }
|
|
|
|
portVoiceAdminRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the portVoiceAdminTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device, and which is
|
|
supplied by a management station wishing to exercise an
|
|
on-line update of the existing conceptual row. For a
|
|
management protocol set operation, a genErr response is
|
|
returned when the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
::= { portVoiceAdminEntry 35 }
|
|
|
|
--
|
|
-- The Voice Port Operational table
|
|
--
|
|
|
|
portVoiceOperTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortVoiceOperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of Voice ports. The number of entries
|
|
will be the number of Voice ports on the node."
|
|
::= { portVoiceGroup 2 }
|
|
|
|
portVoiceOperEntry OBJECT-TYPE
|
|
SYNTAX PortVoiceOperEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A Voice Port entry containing objects relating
|
|
to the port that are configurable by the user."
|
|
INDEX { portVoiceOperRlpIndex, portVoiceOperPortIndex }
|
|
::= { portVoiceOperTable 1 }
|
|
|
|
PortVoiceOperEntry ::=
|
|
SEQUENCE {
|
|
portVoiceOperRlpIndex
|
|
INTEGER,
|
|
portVoiceOperPortIndex
|
|
INTEGER,
|
|
portVoiceOperBlockedFlag
|
|
INTEGER,
|
|
portVoiceOperSpeed
|
|
INTEGER,
|
|
portVoiceOperDTMF
|
|
INTEGER,
|
|
portVoiceOperInterface
|
|
INTEGER,
|
|
portVoiceOperTETimer
|
|
INTEGER,
|
|
portVoiceOperLevelIn
|
|
INTEGER,
|
|
portVoiceOperLevelOut
|
|
INTEGER,
|
|
portVoiceOperCallTimer
|
|
INTEGER,
|
|
portVoiceOperHuntGroup
|
|
INTEGER,
|
|
portVoiceOperLongDialPrefix
|
|
OCTET STRING,
|
|
portVoiceOperSLTTimeout
|
|
INTEGER,
|
|
portVoiceOperLinkDownBusy
|
|
INTEGER,
|
|
portVoiceOperFaxSupported
|
|
INTEGER,
|
|
portVoiceOperTelephonyType
|
|
INTEGER,
|
|
portVoiceOperJitter
|
|
INTEGER,
|
|
portVoiceOperSampleDelay
|
|
INTEGER,
|
|
portVoiceOperDialTimer
|
|
INTEGER,
|
|
portVoiceOperAutoDial
|
|
INTEGER,
|
|
portVoiceOperSuppression
|
|
INTEGER,
|
|
portVoiceOperAutoDialNumber
|
|
OCTET STRING,
|
|
portVoiceOperAutoPoll
|
|
INTEGER,
|
|
portVoiceOperAutoPollTimer
|
|
INTEGER,
|
|
portVoiceOperExtDigitsSource
|
|
INTEGER,
|
|
portVoiceOperNumDigitsDelete
|
|
INTEGER,
|
|
portVoiceOperForwardDelay
|
|
INTEGER,
|
|
portVoiceOperForwardedType
|
|
INTEGER,
|
|
portVoiceOperForwardedDigits
|
|
INTEGER,
|
|
portVoiceOperMakeRatio
|
|
INTEGER,
|
|
portVoiceOperBreakRatio
|
|
INTEGER,
|
|
portVoiceOperDTMFOnDuration
|
|
INTEGER,
|
|
portVoiceOperDTMFOffDuration
|
|
INTEGER,
|
|
portVoiceOperToneType
|
|
INTEGER
|
|
}
|
|
|
|
portVoiceOperRlpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The RLP number of the Voice port."
|
|
::= { portVoiceOperEntry 1 }
|
|
|
|
portVoiceOperPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Port number of the Voice port."
|
|
::= { portVoiceOperEntry 2 }
|
|
|
|
portVoiceOperBlockedFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The flag which causes the port to be enabled or disabled
|
|
at node IPL. The port will remain in that state until this
|
|
flag is changed and the node is rebooted, or until an on-
|
|
line enable or disable is performed."
|
|
::= { portVoiceOperEntry 3 }
|
|
|
|
portVoiceOperSpeed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bps-4800 (1),
|
|
bps-8000 (2),
|
|
bps-32000 (3),
|
|
bps-64000 (4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The speed of the port which is transmitted as part
|
|
of a Call Setup frame. A Voice call will be established
|
|
if there is enough bandwidth at each end to provide the
|
|
minimum configured rate."
|
|
::= { portVoiceOperEntry 4 }
|
|
|
|
portVoiceOperDTMF OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The flag to enable, disable, or specify a time span
|
|
over which DTMF (Dual Tone Multi Frequency) tones will
|
|
be regenerated.
|
|
0 = pass tones transparently to the remote device.
|
|
1 = detect incoming tones and regenerate as received.
|
|
2-255 = regenerate tones for the specified seconds."
|
|
::= { portVoiceOperEntry 5 }
|
|
|
|
portVoiceOperInterface OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
em-4w (1),
|
|
em-2w (2),
|
|
loop-start (3),
|
|
ac15-a (4),
|
|
ac15-b (6),
|
|
em-4w-te (10),
|
|
em-2w-te (11)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of interface (in conjunction with the Telephony
|
|
Interface Type) that will be used by the Voice channel.
|
|
This requires rebooting for the change to take effect.
|
|
Telephony Type Interface Type
|
|
-------------- --------------
|
|
OPX (FXO) Loop Start
|
|
SLT (FXS) Loop Start
|
|
E&M 4W E&M, 4W E&M TE, 2W E&M, 2W E&M TE
|
|
AC15 AC15A, AC15C"
|
|
::= { portVoiceOperEntry 6 }
|
|
|
|
portVoiceOperTETimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The delay at which the E&M 'E' lead follows the 'M' lead."
|
|
::= { portVoiceOperEntry 7 }
|
|
|
|
portVoiceOperLevelIn OBJECT-TYPE
|
|
SYNTAX INTEGER (-22..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The local voice level into the voice port. This adjusts
|
|
the sensitivity of the local voice channel to the signal
|
|
from the attached device. The purpose of this is to match
|
|
the voice channel dB level to the input signal. A more
|
|
negative setting produces a higher input gain. If the level
|
|
is reduced, the voice channel will be more sensitive to the
|
|
input. This will also cause the voice output at the remote
|
|
device to sound louder."
|
|
::= { portVoiceOperEntry 8 }
|
|
|
|
portVoiceOperLevelOut OBJECT-TYPE
|
|
SYNTAX INTEGER (-22..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The local voice level out of the voice port. A more
|
|
positive setting produces a higher volume."
|
|
::= { portVoiceOperEntry 9 }
|
|
|
|
portVoiceOperCallTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (1..30)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The amount of time the node will wait for a response to a
|
|
Call Connect or Call Clear request. When the node issues a
|
|
request, it will set a timer to the value configured here.
|
|
If that timer expires with no response from the destination,
|
|
the node will generate a busy tone."
|
|
::= { portVoiceOperEntry 10 }
|
|
|
|
portVoiceOperHuntGroup OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
a (2),
|
|
b (3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The hunt group that includes the voice channel."
|
|
::= { portVoiceOperEntry 11 }
|
|
|
|
portVoiceOperLongDialPrefix OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The character that will be required preceeding calls using
|
|
the long call format. When the user at an attached device
|
|
dials a long form number, it must be preceeded by the prefix
|
|
character specified here."
|
|
::= { portVoiceOperEntry 12 }
|
|
|
|
portVoiceOperSLTTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER (1..99)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time the local port will wait before an actual fax
|
|
transmission begins. If there is no fax tone when this
|
|
timer expires, the connection will be terminated."
|
|
::= { portVoiceOperEntry 13 }
|
|
|
|
portVoiceOperLinkDownBusy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This flag enables or disables automatic busy-out of
|
|
channels when the link is down. When enabled, the system
|
|
will automatically busy-out channels when the composite
|
|
link is down. When disabled, channels remain on-hook when
|
|
the link is down. If your application is connected to a
|
|
PBX that can route calls to another alternate source based
|
|
on an all busy condition, enable this so the PBX will
|
|
recognize this condition and reroute the calls while the
|
|
composite link is down."
|
|
::= { portVoiceOperEntry 14 }
|
|
|
|
portVoiceOperFaxSupported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The flag to indicate whether or not faxes will be
|
|
transmitted on the port. If no, all calls will be treated
|
|
as voice. If yes, both voice and fax will be transmitted."
|
|
::= { portVoiceOperEntry 15 }
|
|
|
|
portVoiceOperTelephonyType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
opx (1),
|
|
slt (2),
|
|
em (3),
|
|
ac15 (4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of interface (in conjunction with the
|
|
Interface Type) that will be used by the Voice channel.
|
|
This requires rebooting for the change to take effect.
|
|
Telephony Type Interface Type
|
|
-------------- --------------
|
|
OPX (FXO) Loop Start
|
|
SLT (FXS) Loop Start
|
|
E&M 4W E&M, 4W E&M TE, 2W E&M, 2W E&M TE
|
|
AC15 AC15A, AC15C"
|
|
::= { portVoiceOperEntry 16 }
|
|
|
|
portVoiceOperJitter OBJECT-TYPE
|
|
SYNTAX INTEGER (10..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The amount of jitter delay."
|
|
::= { portVoiceOperEntry 17 }
|
|
|
|
portVoiceOperSampleDelay OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The amount of sample delay."
|
|
::= { portVoiceOperEntry 18 }
|
|
|
|
portVoiceOperDialTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..10)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The delay the node will use to determine when variable
|
|
length dialing is complete. (Variable length dialing allows
|
|
the user to place a call without entering the configured
|
|
number of digits for the speed dial number.)"
|
|
::= { portVoiceOperEntry 19 }
|
|
|
|
portVoiceOperAutoDial OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The flag to enable or disable the auto dial feature. Note
|
|
that enabling this feature will disable the variable length
|
|
dialing feature for this channel."
|
|
::= { portVoiceOperEntry 20 }
|
|
|
|
portVoiceOperSuppression OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
very-low (1),
|
|
low (2),
|
|
medium (3),
|
|
high (4),
|
|
very-high (5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The silence suppression level. A larger silence suppression
|
|
level allows more data channels to operate simultaneously
|
|
with the voice channels."
|
|
::= { portVoiceOperEntry 21 }
|
|
|
|
portVoiceOperAutoDialNumber OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (0..4))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number to which the node will attempt to connect when
|
|
the handset attached to this port is taken off-hook. This
|
|
is applicable only when the Auto Dial feature is enabled."
|
|
::= { portVoiceOperEntry 22 }
|
|
|
|
portVoiceOperAutoPoll OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The flag to enable or disable auto polling. This is
|
|
applicable only when the Auto Dial feature is enabled.
|
|
When enabled, the node periodically polls the destination.
|
|
If the poll is not acknowledged, the node will busy-out
|
|
the channel. This can be useful in situations where the
|
|
destination is an emergency number that must always be
|
|
available. If the destination does not answer the automatic
|
|
poll, the busy-out condition will notify an attached PBX
|
|
that the emergency call should be routed to another call
|
|
routing device."
|
|
::= { portVoiceOperEntry 23 }
|
|
|
|
portVoiceOperAutoPollTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (5..30)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The frequency with which an Auto Poll will be sent. This
|
|
is applicable only when auto poll is enabled."
|
|
::= { portVoiceOperEntry 24 }
|
|
|
|
portVoiceOperExtDigitsSource OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
map (1),
|
|
user (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The source of the extended digits when the user of
|
|
attached equipment dials a speed dial number. This is
|
|
applicable only when the number of extended dial digits
|
|
is greater than zero. When map is specified, extended
|
|
digits are taken from the extended digits field in the
|
|
map table. When user is specified, extended digits are
|
|
taken from the user of attached equipment."
|
|
::= { portVoiceOperEntry 25 }
|
|
|
|
portVoiceOperNumDigitsDelete OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of leading dial digits that will be deleted
|
|
before a dial string is forwarded. This is primarily used
|
|
to delete leading dial digits that may be inserted by an
|
|
attached PBX."
|
|
::= { portVoiceOperEntry 26 }
|
|
|
|
portVoiceOperForwardDelay OBJECT-TYPE
|
|
SYNTAX INTEGER (0..40)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The length of a pause that can be inserted in an extended
|
|
dial string that is being forwarded. This is applicable only
|
|
when forwarded output digits is all or extended. When a comma
|
|
is encountered in an extended digits string, the node will
|
|
pause for the length of time specified here before additional
|
|
extended digits are forwarded."
|
|
::= { portVoiceOperEntry 27 }
|
|
|
|
portVoiceOperForwardedType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dtmf (1),
|
|
pulse (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The method how the dial digits will be forwarded. This
|
|
is applicable only when forwarded output digits is all
|
|
or extended."
|
|
::= { portVoiceOperEntry 28 }
|
|
|
|
portVoiceOperForwardedDigits OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
all (2),
|
|
extended (3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The flag indicating which dial digits, if any, to forward.
|
|
If none, dial digits are not forwarded to the destination
|
|
device when a call is initiated on this channel. If all,
|
|
the dialed speed dial number and associated extended digits
|
|
are forwarded to the destination device. If extended, only
|
|
the extended digit string is forwarded."
|
|
::= { portVoiceOperEntry 29 }
|
|
|
|
portVoiceOperMakeRatio OBJECT-TYPE
|
|
SYNTAX INTEGER (20..80)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The make ratio of each digit pulse that is forwarded.
|
|
This is applicable only when forwarded output digits
|
|
is all or extended and forwarded digit type is pulse."
|
|
::= { portVoiceOperEntry 30 }
|
|
|
|
portVoiceOperBreakRatio OBJECT-TYPE
|
|
SYNTAX INTEGER (20..80)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The break ratio of each digit pulse that is forwarded.
|
|
This is applicable only when forwarded output digits
|
|
is all or extended and forwarded digit type is pulse."
|
|
::= { portVoiceOperEntry 31 }
|
|
|
|
portVoiceOperDTMFOnDuration OBJECT-TYPE
|
|
SYNTAX INTEGER (30..1000)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The length of a tone that will be used to produce a
|
|
single DTMF digit. This is applicable only when forwarded
|
|
output digits is all or extended and forwarded digit type
|
|
is DTMF."
|
|
::= { portVoiceOperEntry 32 }
|
|
|
|
portVoiceOperDTMFOffDuration OBJECT-TYPE
|
|
SYNTAX INTEGER (30..1000)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The length of silence between DTMF tones in a dial digit
|
|
string. This is applicable only when forwarded output digits
|
|
is all or extended and forwarded digit type is DTMF."
|
|
::= { portVoiceOperEntry 33 }
|
|
|
|
portVoiceOperToneType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dtmf (1),
|
|
mf (2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The tone type to detect/regenerate for forwarding DTMF/MF."
|
|
::= { portVoiceOperEntry 34 }
|
|
|
|
-- **********************************
|
|
-- * THE NETLINK INTERFACES GROUP *
|
|
-- **********************************
|
|
|
|
nlInterfaces OBJECT IDENTIFIER ::= { local 4 }
|
|
|
|
-- The nlIinterfaces group is a netlink table which contains all interfaces
|
|
-- indexed by RLP and port
|
|
|
|
--
|
|
-- The Netlink If Table
|
|
--
|
|
-- This table is used to correlate an RLP and Port number to a MIB-II
|
|
-- Interface Table entry and a Netlink Interface Table entry. The table
|
|
-- is indexed by RLP and port number.
|
|
-- The range of RLP numbers can be:
|
|
-- 1-8 = RLP cards
|
|
-- 250 = IP Interfaces
|
|
-- 251 = IPX Interfaces
|
|
-- 252 = LLC2 Interfaces
|
|
-- The range of port numbers can be:
|
|
-- For RLP cards (RLP 1-8) :
|
|
-- 1-8 = Physical Port
|
|
-- 9-64 = Logical Port
|
|
-- For IP Interfaces (RLP 250) :
|
|
-- 1-257 = the interface number - FRX4000/FRX6000 version 3.4
|
|
-- 1-129 = the interface number - other FRX4000/FRX6000 and FRX7000
|
|
-- For IPX Interfaces (RLP 251) :
|
|
-- 1-64 = the interface number
|
|
-- For LLC2 Interfaces (RLP 252) :
|
|
-- 1-96 = the interface number - FRX4000/FRX6000
|
|
-- 1-251 = the interface number - FRX7000
|
|
|
|
nlIfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NlIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to describe each interface on a node.
|
|
This table is indexed by RLP and Port number and can be used to
|
|
identify the corresponding MIB-II ifIndex of a Port as well as
|
|
additional port information maintained by Netlink."
|
|
::= { nlInterfaces 1 }
|
|
|
|
nlIfEntry OBJECT-TYPE
|
|
SYNTAX NlIfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An Interface entry containing objects relating to interfaces."
|
|
INDEX { nlIfRlp, nlIfPort }
|
|
::= { nlIfTable 1 }
|
|
|
|
NlIfEntry ::=
|
|
SEQUENCE {
|
|
nlIfRlp
|
|
INTEGER,
|
|
nlIfPort
|
|
INTEGER,
|
|
nlIfType
|
|
INTEGER,
|
|
nlIfIndex
|
|
INTEGER,
|
|
nlIfTableIndex
|
|
INTEGER,
|
|
nlIfTableOid
|
|
OBJECT IDENTIFIER,
|
|
nlIfConnectorType
|
|
INTEGER,
|
|
nlIfPortStatus
|
|
INTEGER,
|
|
nlIfPhyPort
|
|
INTEGER
|
|
}
|
|
|
|
nlIfRlp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The RLP number on the node. RLP numbers 1-8 are Physical
|
|
RLP cards, and RLP number 250, 251 and 252 define IP, IPX and LLC2
|
|
interfaces respectively."
|
|
::= { nlIfEntry 1 }
|
|
|
|
nlIfPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Port number on the RLP. Port numbers 1-8 are
|
|
known to be physical ports, and 9-64 are logical ports. If the
|
|
RLP number identifies an IP, IPX or LLC2 interface, then the port
|
|
number can be 1-257 (IP), 1-64 (IPX), or 1-96 (LLC2)."
|
|
::= { nlIfEntry 2 }
|
|
|
|
nlIfType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
regular1822(2),
|
|
hdh1822(3),
|
|
ddnX25(4),
|
|
rfc877x25(5),
|
|
ethernetCsmacd(6),
|
|
iso88023Csmacd(7),
|
|
iso88024TokenBus(8),
|
|
iso88025TokenRing(9),
|
|
iso88026Man(10),
|
|
starLan(11),
|
|
proteon10Mbit(12),
|
|
proteon80Mbit(13),
|
|
hyperchannel(14),
|
|
fddi(15),
|
|
lapb(16),
|
|
sdlc(17),
|
|
ds1(18), -- DS1/E1 (RFC 1406)
|
|
e1(19), -- obsolete
|
|
basicISDN(20),
|
|
primaryISDN(21),
|
|
propPointToPointSerial(22), -- proprietary serial
|
|
ppp(23),
|
|
softwareLoopback(24),
|
|
eon(25), -- CLNP over IP (RFC 1070)
|
|
ethernet3Mbit(26),
|
|
nsip(27), -- XNS over IP
|
|
slip(28), -- generic SLIP
|
|
ultra(29), -- ULTRA technologies
|
|
ds3(30), -- T-3
|
|
sip(31), -- SMDS
|
|
frameRelay(32), -- DTE only
|
|
rs232(33),
|
|
para(34), -- parallel-port
|
|
arcnet(35), -- arcnet
|
|
arcnetPlus(36), -- arcnet plus
|
|
atm(37), -- ATM cells
|
|
miox25(38),
|
|
sonet(39), -- SONET or SDH
|
|
x25ple(40),
|
|
iso88022llc(41),
|
|
localTalk(42),
|
|
smdsDxi(43),
|
|
frameRelayService(44), -- Frame relay DCE
|
|
v35(45),
|
|
hssi(46),
|
|
hippi(47),
|
|
modem(48), -- Generic modem
|
|
aal5(49), -- AAL5 over ATM
|
|
sonetPath(50),
|
|
sonetVT(51),
|
|
smdsIcip(52), -- SMDS InterCarrier Interface
|
|
propVirtual(53), -- proprietary virtual/internal
|
|
propMultiplexor(54), -- proprietary multiplexing
|
|
trunk(200), -- NETLINK: Trunk port
|
|
async(201), -- NETLINK: Async port
|
|
bsci(202), -- NETLINK: Bsci port
|
|
logicalPort(203), -- NETLINK: Logical port
|
|
t1(204), -- NETLINK: T1 port
|
|
ip(205), -- NETLINK: IP interface
|
|
ipx(206), -- NETLINK: IPX interface
|
|
llc2(207), -- NETLINK: LLC2 interface
|
|
voice(208)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The type of interface"
|
|
::= { nlIfEntry 3 }
|
|
|
|
nlIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The associated index into the MIB-II ifTable for this
|
|
port"
|
|
::= { nlIfEntry 4 }
|
|
|
|
nlIfTableIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The associated index into an enterprise table used to
|
|
describe additional information for this port. See nlIfTableOid as the
|
|
pointer to the actual table."
|
|
::= { nlIfEntry 5 }
|
|
|
|
nlIfTableOid OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The OID of the table Entry that contains additional
|
|
information about this port. The OID will point to a specific table
|
|
depending on the type of port."
|
|
::= { nlIfEntry 6 }
|
|
|
|
nlIfConnectorType OBJECT-TYPE
|
|
SYNTAX INTEGER { none(2),
|
|
rs232(3),
|
|
v25bis-dial(4),
|
|
v35(5),
|
|
rs449(6),
|
|
rs530(7),
|
|
x21(8),
|
|
csudsu(9),
|
|
t1(10),
|
|
e1(11),
|
|
voice(13)
|
|
}
|
|
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The physical connector type used for this port. Valid
|
|
for ports 1-8 only."
|
|
::= { nlIfEntry 7 }
|
|
|
|
nlIfPortStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { linkUp(1),
|
|
restarting(2),
|
|
operational(3),
|
|
disabled(4),
|
|
disconnect(5),
|
|
configured(6),
|
|
dialReady(7),
|
|
quiesced(8),
|
|
failed(9),
|
|
hardwareFault(10),
|
|
other(11),
|
|
ipl(12),
|
|
na(13),
|
|
remoteLoopback(14),
|
|
blueAlarm(15),
|
|
yellowAlarm(16),
|
|
redAlarm(17),
|
|
onHook(18),
|
|
offHook(19),
|
|
dialing(20),
|
|
activeVoiceCall(21),
|
|
onHookPending(22)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The status of this port state. Valid for ports 1-64 only."
|
|
::= { nlIfEntry 8 }
|
|
|
|
nlIfPhyPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Underlying Physical Port number on the RLP of this
|
|
logical port. Port numbers 1-8 are valid, but this field is only
|
|
applicable if the nlIfPort field is 9-64."
|
|
::= { nlIfEntry 9 }
|
|
|
|
nlIfLlc2Interfaces OBJECT IDENTIFIER ::= { nlInterfaces 2}
|
|
|
|
--
|
|
-- The Netlink LLC2 Interface Tables
|
|
--
|
|
|
|
nlIfLlc2LANTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NlIfLlc2LANEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to define LLC2 interfaces over LAN."
|
|
::= { nlIfLlc2Interfaces 1 }
|
|
|
|
nlIfLlc2LANEntry OBJECT-TYPE
|
|
SYNTAX NlIfLlc2LANEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An LLC2 LAN Interface entry containing objects relating
|
|
to LLC2 LAN interfaces."
|
|
INDEX { nlIfLlc2LANRlp, nlIfLlc2LANPort }
|
|
::= { nlIfLlc2LANTable 1 }
|
|
|
|
NlIfLlc2LANEntry ::=
|
|
SEQUENCE {
|
|
nlIfLlc2LANRlp INTEGER,
|
|
nlIfLlc2LANPort INTEGER,
|
|
nlIfLlc2LANType INTEGER,
|
|
nlIfLlc2LANCard INTEGER,
|
|
nlIfLlc2LANID INTEGER,
|
|
nlIfLlc2LANInterface INTEGER,
|
|
nlIfLlc2LANRowStatus RowStatus,
|
|
nlIfLlc2LANPriority INTEGER,
|
|
nlIfLlc2LANBlockedPortFlag INTEGER
|
|
}
|
|
|
|
nlIfLlc2LANRlp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The RLP number on the node. For LLC2 LAN interfaces,
|
|
this must be 252."
|
|
::= { nlIfLlc2LANEntry 1 }
|
|
|
|
nlIfLlc2LANPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Port number on the RLP. For LLC2 LAN interfaces,
|
|
this corresponds to the LAN card number."
|
|
::= { nlIfLlc2LANEntry 2 }
|
|
|
|
nlIfLlc2LANType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ethernet (1),
|
|
token-ring (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The type of the LLC2 interface- either ethernet or
|
|
token ring."
|
|
DEFVAL { ethernet }
|
|
::= { nlIfLlc2LANEntry 3 }
|
|
|
|
nlIfLlc2LANCard OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The LAN card that the LLC2 interface is running on."
|
|
::= { nlIfLlc2LANEntry 4 }
|
|
|
|
nlIfLlc2LANID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Valid only if the type of the LLC2 LAN interface is
|
|
token ring. Identifies the token ring adapter to the network."
|
|
DEFVAL { 4095 }
|
|
::= { nlIfLlc2LANEntry 5 }
|
|
|
|
nlIfLlc2LANInterface OBJECT-TYPE
|
|
SYNTAX INTEGER (1..2)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The LLC2 interface number."
|
|
::= { nlIfLlc2LANEntry 6 }
|
|
|
|
nlIfLlc2LANRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the nlIfLlc2LANTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device. For a management
|
|
protocol set operation, a genErr response is returned when
|
|
the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
::= { nlIfLlc2LANEntry 7 }
|
|
|
|
nlIfLlc2LANPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..9)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Interface priority- allows setting a priority for traffic
|
|
within the node. The higher the number, the higher the priority relative
|
|
to other intra-nodal traffic."
|
|
DEFVAL { 0 }
|
|
::= {nlIfLlc2LANEntry 8}
|
|
|
|
nlIfLlc2LANBlockedPortFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The blocked port flag."
|
|
DEFVAL { no }
|
|
::= { nlIfLlc2LANEntry 9 }
|
|
|
|
nlIfLlc2FrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NlIfLlc2FrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to define LLC2 interfaces over Frame Relay."
|
|
::= { nlIfLlc2Interfaces 2 }
|
|
|
|
nlIfLlc2FrEntry OBJECT-TYPE
|
|
SYNTAX NlIfLlc2FrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An LLC2 FR Interface entry containing objects relating
|
|
to LLC2 FR interfaces."
|
|
INDEX { nlIfLlc2FrRlp, nlIfLlc2FrPort, nlIfLlc2FrDLCI, nlIfLlc2FrFormat }
|
|
::= { nlIfLlc2FrTable 1 }
|
|
|
|
NlIfLlc2FrEntry ::=
|
|
SEQUENCE {
|
|
nlIfLlc2FrRlp INTEGER,
|
|
nlIfLlc2FrPort INTEGER,
|
|
nlIfLlc2FrDLCI INTEGER,
|
|
nlIfLlc2FrFormat INTEGER,
|
|
nlIfLlc2FrPriority INTEGER,
|
|
nlIfLlc2FrBAG INTEGER,
|
|
nlIfLlc2FrHostMACAddress MacAddress,
|
|
nlIfLlc2FrSessionType INTEGER,
|
|
nlIfLlc2FrLANID INTEGER,
|
|
nlIfLlc2FrInterface INTEGER,
|
|
nlIfLlc2FrRowStatus RowStatus,
|
|
nlIfLlc2FrBlockedPortFlag INTEGER
|
|
}
|
|
|
|
nlIfLlc2FrRlp OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The RLP number on the node."
|
|
::= { nlIfLlc2FrEntry 1 }
|
|
|
|
nlIfLlc2FrPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Port number on the RLP. Port numbers 1-8 are
|
|
known to be physical ports, and channels are 193-241."
|
|
::= { nlIfLlc2FrEntry 2 }
|
|
|
|
nlIfLlc2FrDLCI OBJECT-TYPE
|
|
SYNTAX INTEGER (16..991)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The DLCI number used to identify the entry in the table.
|
|
The range is 16-991. "
|
|
::= { nlIfLlc2FrEntry 3 }
|
|
|
|
nlIfLlc2FrFormat OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
native-llc2 (1),
|
|
tb-8023 (2),
|
|
srb-8025 (3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The RFC1490 encapsulation method used for LLC2 traffic."
|
|
::= {nlIfLlc2FrEntry 4}
|
|
|
|
nlIfLlc2FrPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..9)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Interface priority- allows setting a priority for traffic
|
|
within the node. The higher the number, the higher the priority relative
|
|
to other intra-nodal traffic."
|
|
DEFVAL { 0 }
|
|
::= {nlIfLlc2FrEntry 5}
|
|
|
|
nlIfLlc2FrBAG OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Assigns the interface to one of sixteen groups whose parameters
|
|
regulate bandwidth usage."
|
|
DEFVAL { 1 }
|
|
::= {nlIfLlc2FrEntry 6}
|
|
|
|
nlIfLlc2FrHostMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The MAC address of the host or workstation to which
|
|
the remote device needs to connect. Valid only if the format is
|
|
native-llc2."
|
|
DEFVAL { '400000000001'H } -- 40:00:00:00:00:01
|
|
::= {nlIfLlc2FrEntry 7}
|
|
|
|
nlIfLlc2FrSessionType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
terminated (1),
|
|
originated (2),
|
|
not-applicable (3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "If originated, means that LLC2 connects from the configured
|
|
Host MAC address can use this interface. If terminated, connections to
|
|
the configured address can use this interface. Valid only if the
|
|
format is native-llc2."
|
|
DEFVAL { originated }
|
|
::= {nlIfLlc2FrEntry 8}
|
|
|
|
nlIfLlc2FrLANID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Identifies the ring number used by a frame relay-compliant
|
|
source-route bridge at the other end of this PVC. Valid only if the
|
|
format is srb-8025."
|
|
DEFVAL { 4095 }
|
|
::= { nlIfLlc2FrEntry 9 }
|
|
|
|
nlIfLlc2FrInterface OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LLC2 interface number."
|
|
::= { nlIfLlc2FrEntry 10 }
|
|
|
|
nlIfLlc2FrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the nlIfLlc2FrTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device. For a management
|
|
protocol set operation, a genErr response is returned when
|
|
the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
::= { nlIfLlc2FrEntry 11 }
|
|
|
|
nlIfLlc2FrBlockedPortFlag OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The blocked port flag."
|
|
DEFVAL { no }
|
|
::= { nlIfLlc2FrEntry 12 }
|
|
|
|
ipxConfig OBJECT IDENTIFIER ::= { nlInterfaces 3 }
|
|
ipxConfigRouting OBJECT IDENTIFIER ::= { ipxConfig 1 }
|
|
|
|
-- Routing Group
|
|
|
|
-- Static Route Config Table
|
|
-- The static route config table contains an entry for each static route entry
|
|
-- in the system
|
|
|
|
ipxStaticRouteConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IPXStaticRouteConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "The IPX Static Route Configuration Table"
|
|
::= {ipxConfigRouting 1}
|
|
|
|
ipxStaticRouteConfigEntry OBJECT-TYPE
|
|
SYNTAX IPXStaticRouteConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "Each entry corresponds to one instance of IPX Static Routing on the system"
|
|
INDEX {ipxStaticRouteConfigCircIndex,
|
|
ipxStaticRouteConfigNetNum
|
|
}
|
|
|
|
::= {ipxStaticRouteConfigTable 1}
|
|
|
|
IPXStaticRouteConfigEntry ::= SEQUENCE {
|
|
ipxStaticRouteConfigCircIndex
|
|
INTEGER,
|
|
ipxStaticRouteConfigNetNum
|
|
OCTET STRING,
|
|
ipxStaticRouteConfigRouter
|
|
OCTET STRING,
|
|
ipxStaticRouteConfigRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
ipxStaticRouteConfigCircIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The unique identifier of the circuit used to reach the
|
|
first hop in the static route"
|
|
::= {ipxStaticRouteConfigEntry 1}
|
|
|
|
ipxStaticRouteConfigNetNum OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The IPX network number of the route's destination"
|
|
::= {ipxStaticRouteConfigEntry 2}
|
|
|
|
ipxStaticRouteConfigRouter OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The hex value of the node address of the router that will forward a packet when this route is used.
|
|
If Novell's IPXWAN is used on the interface, this field will be ignored "
|
|
::= {ipxStaticRouteConfigEntry 3}
|
|
|
|
ipxStaticRouteConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the ipxStaticRouteTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device. For a management
|
|
protocol set operation, a genErr response is returned when
|
|
the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
::= {ipxStaticRouteConfigEntry 4}
|
|
|
|
-- Static SAP Config Table
|
|
-- The static SAP config table contains an entry for each SAP route entry
|
|
-- in the system
|
|
|
|
ipxServConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IPXServConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "The IPX Static Route Configuration Table"
|
|
::= {ipxConfigRouting 2}
|
|
|
|
ipxServConfigEntry OBJECT-TYPE
|
|
SYNTAX IPXServConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "Each entry corresponds to one instance of IPX Static Routing on the system"
|
|
INDEX {ipxServConfigServiceType,
|
|
ipxServConfigServName
|
|
}
|
|
|
|
::= {ipxServConfigTable 1}
|
|
|
|
IPXServConfigEntry ::= SEQUENCE {
|
|
ipxServConfigServiceType
|
|
INTEGER,
|
|
ipxServConfigServName
|
|
OCTET STRING,
|
|
ipxServConfigServNetworkAddress
|
|
INTEGER,
|
|
ipxServConfigServNodeAddress
|
|
OCTET STRING,
|
|
ipxServConfigServSocketNumber
|
|
INTEGER,
|
|
ipxServConfigInterveningNetworks
|
|
INTEGER,
|
|
ipxServConfigGatewayAddress
|
|
OCTET STRING,
|
|
ipxServConfigInterface
|
|
INTEGER,
|
|
ipxServConfigRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
ipxServConfigServiceType OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Service Type, a SAP service code "
|
|
::= {ipxServConfigEntry 1}
|
|
|
|
ipxServConfigServName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..48))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Sercice Name, identifies a specific server in the IPX network. "
|
|
::= {ipxServConfigEntry 2}
|
|
|
|
ipxServConfigServNetworkAddress OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The IPX network number portion of the IPX address of the server identified by ServName "
|
|
DEFVAL { 1 }
|
|
::= {ipxServConfigEntry 3}
|
|
|
|
ipxServConfigServNodeAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The node portion of the IPX address of the service"
|
|
::= {ipxServConfigEntry 4}
|
|
|
|
ipxServConfigServSocketNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The socket portion of the IPX address of the service"
|
|
DEFVAL { 0 }
|
|
::= {ipxServConfigEntry 5}
|
|
|
|
ipxServConfigInterveningNetworks OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of routers that a packet must pass through t reach the server"
|
|
DEFVAL { 1 }
|
|
::= {ipxServConfigEntry 6}
|
|
|
|
ipxServConfigGatewayAddress OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The node address of the router thar will forward a packet"
|
|
::= {ipxServConfigEntry 7}
|
|
|
|
ipxServConfigInterface OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The IPX network number assigned to the interface used to send packets that are destined for this server"
|
|
DEFVAL { 0 }
|
|
::= {ipxServConfigEntry 8}
|
|
|
|
ipxServConfigRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the ipxServTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device. For a management
|
|
protocol set operation, a genErr response is returned when
|
|
the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
::= {ipxServConfigEntry 9}
|
|
|
|
ipxConfigInterface OBJECT IDENTIFIER ::= { ipxConfig 2 }
|
|
|
|
-- Interface Group
|
|
|
|
-- Interface Table
|
|
|
|
ipxInterfaceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IPXInterfaceEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "The IPX Interface Table"
|
|
::= {ipxConfigInterface 6}
|
|
|
|
ipxInterfaceEntry OBJECT-TYPE
|
|
SYNTAX IPXInterfaceEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
INDEX {ipxInterfaceNumber
|
|
}
|
|
|
|
::= {ipxInterfaceTable 1}
|
|
|
|
IPXInterfaceEntry ::= SEQUENCE {
|
|
ipxInterfaceNumber INTEGER,
|
|
ipxInterfaceBlockedPortFlag INTEGER,
|
|
ipxInterfaceType INTEGER,
|
|
ipxInterfaceFrameType INTEGER,
|
|
ipxInterfaceMaxTransUnit INTEGER,
|
|
ipxInterfaceNetworkAddress INTEGER,
|
|
ipxInterfaceBandwidthAllocGroup INTEGER,
|
|
ipxInterfacePortDiagEnabled INTEGER,
|
|
ipxInterfaceNetBIOSEnabled INTEGER,
|
|
ipxInterfaceNetBIOSHops INTEGER,
|
|
ipxInterfacePeriodicRIPEnabled INTEGER,
|
|
ipxInterfacePeriodicRIPTimer INTEGER,
|
|
ipxInterfacePeriodicSAPEnabled INTEGER,
|
|
ipxInterfacePeriodicSAPTimer INTEGER,
|
|
ipxInterfaceRIPEnabled INTEGER,
|
|
ipxInterfaceRIPAgeTimer INTEGER,
|
|
ipxInterfaceRIPMaxSize INTEGER,
|
|
ipxInterfaceSAPEnabled INTEGER,
|
|
ipxInterfaceSAPAgeTimer INTEGER,
|
|
ipxInterfaceTransportTime INTEGER,
|
|
ipxInterfaceSerializationEnabled INTEGER,
|
|
ipxInterfaceWatchdogSpoofingEnabled INTEGER,
|
|
ipxInterfaceLanCardNumber INTEGER,
|
|
ipxInterfaceWanEnabled INTEGER,
|
|
ipxInterfaceSourceSubscriber OCTET STRING,
|
|
ipxInterfaceDestinationSubscriber OCTET STRING,
|
|
ipxInterfaceSVCRetryTimer INTEGER,
|
|
ipxInterfaceSVCIdleTimer INTEGER,
|
|
ipxInterfaceMaxVC INTEGER,
|
|
ipxInterfacePVCConnection INTEGER,
|
|
ipxInterfaceSourceCard INTEGER,
|
|
ipxInterfaceSourcePort INTEGER,
|
|
ipxInterfaceSourceDLCI INTEGER,
|
|
ipxInterfaceRowStatus RowStatus
|
|
}
|
|
|
|
ipxInterfaceNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..64)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Interface Number, a sequential number to identify the interface"
|
|
::= {ipxInterfaceEntry 1}
|
|
|
|
ipxInterfaceBlockedPortFlag OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ no(1),
|
|
yes(2)
|
|
}
|
|
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This flag causes the IPX interface to be enabled (N) or disabled (Y) at node IPL. The port
|
|
will remain in that state until this parameter is changed"
|
|
::= {ipxInterfaceEntry 2}
|
|
|
|
ipxInterfaceType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ ethernet(1),
|
|
eight025(2),
|
|
x25(3),
|
|
frl(4)
|
|
}
|
|
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The interface type. 802.5 is not valid on FRX4000"
|
|
::= {ipxInterfaceEntry 3}
|
|
|
|
ipxInterfaceFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ typeII(1),
|
|
raw(2),
|
|
llc(3),
|
|
snap(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The frame type - depends on the interfece type. Valid combinations are:
|
|
Ethernet, 802.5 - typeII, raw, llc, snap
|
|
Frame relay, X25 - typeII"
|
|
DEFVAL { typeII }
|
|
::= {ipxInterfaceEntry 4}
|
|
|
|
ipxInterfaceMaxTransUnit OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Maximum frame size that can be transmitted or received over the IPX interface.: Valid ranges are:
|
|
Ethernet - (45-1518)
|
|
802.5 - (48-4096)
|
|
Frame relay, X25 - (31-4096) "
|
|
DEFVAL { 4096 }
|
|
::= {ipxInterfaceEntry 5}
|
|
|
|
ipxInterfaceNetworkAddress OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Identifies the local interface to the Novell Network"
|
|
DEFVAL { 0 }
|
|
::= {ipxInterfaceEntry 6}
|
|
|
|
ipxInterfaceBandwidthAllocGroup OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Assigns the IPX interface to one of sixteen groups whose parameters regulate bandwidth usage"
|
|
DEFVAL { 1 }
|
|
::= {ipxInterfaceEntry 7}
|
|
|
|
ipxInterfacePortDiagEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Enables/Disables the IPX interface's ability to handle Novell diagonistics packets"
|
|
DEFVAL { no }
|
|
::= {ipxInterfaceEntry 8}
|
|
|
|
ipxInterfaceNetBIOSEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Determines whether Novell-encapsulated NetBIOS
|
|
frames received on the interface will be processed"
|
|
DEFVAL { no }
|
|
::= {ipxInterfaceEntry 9}
|
|
|
|
ipxInterfaceNetBIOSHops OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Maximum number of hops allowed for routing a Novell-encapsulated NetBIOS frame"
|
|
DEFVAL { 8 }
|
|
::= {ipxInterfaceEntry 10}
|
|
|
|
ipxInterfacePeriodicRIPEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Determines whether the node will originate periodic IPX Routing Information Protocol messages
|
|
from this interface to inform the network that the route through this interface is viable"
|
|
DEFVAL { no }
|
|
::= {ipxInterfaceEntry 11}
|
|
|
|
ipxInterfacePeriodicRIPTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This is the interval between the periodic IPX RIP broadcasts from this interface"
|
|
DEFVAL { 60 }
|
|
::= {ipxInterfaceEntry 12}
|
|
|
|
ipxInterfacePeriodicSAPEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Determines whether the node will originate periodic IPX SAP messages
|
|
from this interface to inform the network which SAP entries in the routing table are viable"
|
|
DEFVAL { no }
|
|
::= {ipxInterfaceEntry 13}
|
|
|
|
ipxInterfacePeriodicSAPTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The interval between the periodic SAP broadcasts from this interface"
|
|
DEFVAL { 60 }
|
|
::= {ipxInterfaceEntry 14}
|
|
|
|
ipxInterfaceRIPEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Datermines whether this interface will support RIP proceswsing "
|
|
DEFVAL { no }
|
|
::= {ipxInterfaceEntry 15}
|
|
|
|
ipxInterfaceRIPAgeTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This is used to delete route entries in the routing information table. The timer starts/restarts
|
|
each time an entry is created/updated. If the timer expires, the router will assume that the entry is no
|
|
longer valid and the entry will be deleteda from the table "
|
|
DEFVAL { 180 }
|
|
::= {ipxInterfaceEntry 16}
|
|
|
|
ipxInterfaceRIPMaxSize OBJECT-TYPE
|
|
SYNTAX INTEGER (54..446)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Maximum possible RIP packet size "
|
|
DEFVAL { 446 }
|
|
::= {ipxInterfaceEntry 17}
|
|
|
|
ipxInterfaceSAPEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Determines whether the interface will support SAP or not "
|
|
DEFVAL { no }
|
|
::= {ipxInterfaceEntry 18}
|
|
|
|
ipxInterfaceSAPAgeTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This is used to delete route entries from the router information table. The timer starts/restars
|
|
each time an entry is created/updated. If the timer expires, the router will assume that the entry is no
|
|
longer valid and the entry will be deleted from the table "
|
|
DEFVAL { 180 }
|
|
::= {ipxInterfaceEntry 19}
|
|
|
|
ipxInterfaceTransportTime OBJECT-TYPE
|
|
SYNTAX INTEGER (1..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "is the time (in 55 milliseconds unit) that will normally take to forward frames out of interface.
|
|
Recommmended values are 1 for LAN interfaces and 30 for WAN interfaces. A value of 0 indicates that the
|
|
back to back frame forwarding is acceptable. This time is used to calculate the least cost path during
|
|
routing. If IPXWAMN is (Y), Transport time will be overridden by the value calculated by IPXWAN "
|
|
DEFVAL { 1 }
|
|
::= {ipxInterfaceEntry 20}
|
|
|
|
ipxInterfaceSerializationEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Determines whether NetWare file server serialization security frames will be
|
|
forwarded on the interface. These broadcasts frames are used by Novell to hold informations regarding the
|
|
licensing of the file server executables "
|
|
DEFVAL { no }
|
|
::= {ipxInterfaceEntry 21}
|
|
|
|
ipxInterfaceWatchdogSpoofingEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Determines whether this interface will be used by the local node to respond to (keep alive) messages on
|
|
behalf of the client workstations. Novell servers periodically issue these messages to all clients
|
|
to determine whether each client is still alive "
|
|
DEFVAL { no }
|
|
::= {ipxInterfaceEntry 22}
|
|
|
|
ipxInterfaceLanCardNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The card number installed in an FRX6000. The first or only LAN card installed is always 0,
|
|
and the second is card 1"
|
|
DEFVAL { 0 }
|
|
::= {ipxInterfaceEntry 23}
|
|
|
|
ipxInterfaceWanEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ no(1),
|
|
yes(2),
|
|
not-applicable(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Determines whether Novell's IPXWAN protocol will be used on the interface. IPXWAN specifies a method
|
|
for IPX routers to communicate across WAN links. FRX6000 and FRX4000 implement IPXWAN running over RFC
|
|
1490-complaint frame relay and RFC1356-complaint X.25"
|
|
DEFVAL { no }
|
|
::= {ipxInterfaceEntry 24}
|
|
|
|
ipxInterfaceSourceSubscriber OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..15))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Subscruber id that defines an IPX interface in the node, by associating itself with port 66 (a
|
|
number reserved for the IPXinterface) on the RLP that has an IPX installed on it.
|
|
.. Valid only for type X.25 "
|
|
::= {ipxInterfaceEntry 25}
|
|
|
|
ipxInterfaceDestinationSubscriber OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(0..15))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Subscriber ID associated with the physical X.25 port that will be used for the IPX interface .
|
|
.. Valid only for type X.25 "
|
|
::= {ipxInterfaceEntry 26}
|
|
|
|
ipxInterfaceSVCRetryTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (5..60)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The frequency with which calls will be placed to try to establish a connection
|
|
.. Valid only for type X.25 "
|
|
DEFVAL { 20 }
|
|
::= {ipxInterfaceEntry 27}
|
|
|
|
ipxInterfaceSVCIdleTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..5)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "is a period that an IPX connection can remain active with no traffic before the connection is cleared.
|
|
.. Valid only for type X.25 "
|
|
DEFVAL { 1 }
|
|
::= {ipxInterfaceEntry 28}
|
|
|
|
ipxInterfaceMaxVC OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "This specifies a number of virtual circuits over which IPX traffic will be transmitted in parallel.
|
|
.. Valid only for type X.25 "
|
|
DEFVAL { 1 }
|
|
::= {ipxInterfaceEntry 29 }
|
|
|
|
ipxInterfacePVCConnection OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{ no(1),
|
|
yes(2),
|
|
not-applicable(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Identifies this interface as one of a PVC.
|
|
.. Valid only for type X.25 "
|
|
DEFVAL { no }
|
|
::= {ipxInterfaceEntry 30}
|
|
|
|
ipxInterfaceSourceCard OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Identifies the location of this end of the frame relay IPX interface.
|
|
.. Valid only for frame relay "
|
|
DEFVAL { 0 }
|
|
::= {ipxInterfaceEntry 31}
|
|
|
|
ipxInterfaceSourcePort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Identifies the location of this end of the frame relay IPX interface.
|
|
.. Valid only for frame relay "
|
|
DEFVAL { 0 }
|
|
::= {ipxInterfaceEntry 32}
|
|
|
|
ipxInterfaceSourceDLCI OBJECT-TYPE
|
|
SYNTAX INTEGER (16..991)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Identifies the location of this end of the frame relay IPX interface.
|
|
.. Valid only for frame relay "
|
|
DEFVAL { 16 }
|
|
::= {ipxInterfaceEntry 33}
|
|
|
|
ipxInterfaceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the ipxInterfaceTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device. For a management
|
|
protocol set operation, a genErr response is returned when
|
|
the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
::= {ipxInterfaceEntry 34}
|
|
|
|
-- The Node Default Group
|
|
|
|
ipxConfigNodeDefault OBJECT IDENTIFIER ::= {ipxConfig 3}
|
|
|
|
ipxNodeDefaultConfigNetworkAddress OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Identifies the node to the IPX network"
|
|
::= {ipxConfigNodeDefault 1}
|
|
|
|
ipxNodeDefaultConfigRIPSAPGap OBJECT-TYPE
|
|
SYNTAX INTEGER (0..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The minimum delay between consecutive RIP and SAP transmissions"
|
|
::= {ipxConfigNodeDefault 2}
|
|
|
|
ipxNodeDefaultConfigRouterName OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..48))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "An unique identifier within the IPX network"
|
|
::= {ipxConfigNodeDefault 3}
|
|
|
|
--
|
|
-- The Netlink IP Interface Table
|
|
--
|
|
|
|
nlIfIpInterfaces OBJECT IDENTIFIER ::= { nlInterfaces 4}
|
|
|
|
nlIfIpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NlIfIpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to define IP interfaces over frame relay,
|
|
X.25, or LAN (ethernet, 802.3, 802.5)."
|
|
::= { nlIfIpInterfaces 1 }
|
|
|
|
nlIfIpEntry OBJECT-TYPE
|
|
SYNTAX NlIfIpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An IP Interface entry containing objects relating
|
|
to IP interfaces."
|
|
INDEX { nlIfIpInterface }
|
|
::= { nlIfIpTable 1 }
|
|
|
|
NlIfIpEntry ::=
|
|
SEQUENCE {
|
|
nlIfIpInterface INTEGER,
|
|
nlIfIpMtu INTEGER,
|
|
nlIfIpNetworkMask IpAddress,
|
|
nlIfIpRouteMetric INTEGER,
|
|
nlIfIpICMPAddRoutes INTEGER,
|
|
nlIfIpRIPDeltaUpdates INTEGER,
|
|
nlIfIpRIPFullUpdates INTEGER,
|
|
nlIfIpPriority INTEGER,
|
|
nlIfIpBAG INTEGER,
|
|
nlIfIpType INTEGER,
|
|
nlIfIpSourceAddress IpAddress,
|
|
nlIfIpDestAddress IpAddress,
|
|
nlIfIpBroadcastAddress IpAddress,
|
|
nlIfIpLANCard INTEGER,
|
|
nlIfIpSourceSub NlSubscriberAddress,
|
|
nlIfIpDestSub NlSubscriberAddress,
|
|
nlIfIpSVCRetryTimer INTEGER,
|
|
nlIfIpSVCIdleTimer INTEGER,
|
|
nlIfIpMaxSVC INTEGER,
|
|
nlIfIpPVCConnection INTEGER,
|
|
nlIfIpSourceRlp INTEGER,
|
|
nlIfIpSourcePort INTEGER,
|
|
nlIfIpSourceDLCI INTEGER,
|
|
nlIfIpRIPSupport INTEGER,
|
|
nlIfIpInverseARP INTEGER,
|
|
nlIfIpProxyARP INTEGER,
|
|
nlIfIpUnnumberedIf INTEGER,
|
|
nlIfIpRowStatus RowStatus
|
|
}
|
|
|
|
nlIfIpInterface OBJECT-TYPE
|
|
SYNTAX INTEGER (1..257)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The interface number which uniquely identifies the
|
|
interface to which this entry is applicable. The
|
|
interface identified by a particular value of this
|
|
number is NOT the same interface as defined by the
|
|
same value of ifIndex."
|
|
::= { nlIfIpEntry 1 }
|
|
|
|
nlIfIpMtu OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4096)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The maximum size (in bytes) of the data field that can
|
|
be used to encapsulate an IP datagram for transmission
|
|
over the interface. If the interface type is LAN based,
|
|
then the maximum size value cannot exceed 1500."
|
|
DEFVAL { 4096 }
|
|
::= { nlIfIpEntry 2 }
|
|
|
|
nlIfIpNetworkMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The mask used during routing to determine the portion
|
|
of the address associated with the network."
|
|
DEFVAL { 'FF000000'H } -- 255.0.0.0
|
|
::= { nlIfIpEntry 3 }
|
|
|
|
nlIfIpRouteMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of network hops (network gateways in the
|
|
overall path over the internet) associated with this
|
|
interface."
|
|
DEFVAL { 0 }
|
|
::= { nlIfIpEntry 4 }
|
|
|
|
nlIfIpICMPAddRoutes OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The flag which indicates whether IP may add routes
|
|
obtained by ICMP, whose error and control function
|
|
is used to send re-direction options back to the
|
|
source if problems are discovered."
|
|
DEFVAL { yes }
|
|
::= { nlIfIpEntry 5 }
|
|
|
|
nlIfIpRIPDeltaUpdates OBJECT-TYPE
|
|
SYNTAX INTEGER (10..300)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The frequency with which RIP messages will be sent to
|
|
every neighbor node, containing any changes to the
|
|
routing table that occurred since the last full update."
|
|
DEFVAL { 30 }
|
|
::= { nlIfIpEntry 6 }
|
|
|
|
nlIfIpRIPFullUpdates OBJECT-TYPE
|
|
SYNTAX INTEGER (10..300)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The frequency with which updates of the entire routing
|
|
table will be sent to every neighbor node, via one or
|
|
more RIP messages."
|
|
DEFVAL { 60 }
|
|
::= { nlIfIpEntry 7 }
|
|
|
|
nlIfIpPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..9)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The priority setting for traffic within the node. The
|
|
higher the number, the higher the priority relative to
|
|
other intra-nodal traffic."
|
|
DEFVAL { 5 }
|
|
::= { nlIfIpEntry 8 }
|
|
|
|
nlIfIpBAG OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The bandwidth allocation group to which this interface
|
|
is assigned to. This object is only valid when the
|
|
interface type is frame relay or proprietary virtual."
|
|
DEFVAL { 1 }
|
|
::= { nlIfIpEntry 9 }
|
|
|
|
nlIfIpType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
rfc877x25(5),
|
|
ethernetCsmacd(6),
|
|
iso88023Csmacd(7),
|
|
iso88025TokenRing(9),
|
|
frameRelay(32), -- DTE only
|
|
propVirtual(53) -- proprietary virtual/internal
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The type of IP interface."
|
|
DEFVAL { rfc877x25 }
|
|
::= { nlIfIpEntry 10 }
|
|
|
|
nlIfIpSourceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The IP address of the end-to-end sender."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { nlIfIpEntry 11 }
|
|
|
|
nlIfIpDestAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The IP address of the end-to-end receiver. This object
|
|
is only valid when the interface type is X.25 or proprietary
|
|
virtual, or when the interface type is frame relay and the
|
|
inverse ARP flag indicates disabled."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { nlIfIpEntry 12 }
|
|
|
|
nlIfIpBroadcastAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The IP address that is used to send to all LAN hosts
|
|
on the network. This object is only valid when the
|
|
interface type is LAN based."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { nlIfIpEntry 13 }
|
|
|
|
nlIfIpLANCard OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The LAN card that contains the interface. This object
|
|
is only valid when the interface type is LAN based."
|
|
DEFVAL { 0 }
|
|
::= { nlIfIpEntry 14 }
|
|
|
|
nlIfIpSourceSub OBJECT-TYPE
|
|
SYNTAX NlSubscriberAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The subscriber ID associated with the source IP
|
|
interface port. This object is only valid when the
|
|
interface type is X.25."
|
|
::= { nlIfIpEntry 15 }
|
|
|
|
nlIfIpDestSub OBJECT-TYPE
|
|
SYNTAX NlSubscriberAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The subscriber ID associated with the destination IP
|
|
interface port. This object is only valid when the
|
|
interface type is X.25."
|
|
::= { nlIfIpEntry 16 }
|
|
|
|
nlIfIpSVCRetryTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (5..60)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The frequency with which calls will be placed to try
|
|
to establish a connection. This object is only valid
|
|
when the interface type is X.25."
|
|
DEFVAL { 20 }
|
|
::= { nlIfIpEntry 17 }
|
|
|
|
nlIfIpSVCIdleTimer OBJECT-TYPE
|
|
SYNTAX INTEGER (0..5)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The period that an IP connection remains active with
|
|
no traffic before the connection is cleared. This object
|
|
is only valid when the interface type is X.25."
|
|
DEFVAL { 1 }
|
|
::= { nlIfIpEntry 18 }
|
|
|
|
nlIfIpMaxSVC OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of virtual circuits over which IP traffic
|
|
will be transmitted in parallel. This object is only
|
|
valid when the interface type is X.25."
|
|
DEFVAL { 1 }
|
|
::= { nlIfIpEntry 19 }
|
|
|
|
nlIfIpPVCConnection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The flag which indicates whether this interface is a
|
|
PVC. This object is only valid when the interface type
|
|
is X.25."
|
|
DEFVAL { no }
|
|
::= { nlIfIpEntry 20 }
|
|
|
|
nlIfIpSourceRlp OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The RLP of the logical interface of this end of the frame
|
|
relay link. This object is only valid when the interface
|
|
type is frame relay."
|
|
DEFVAL { 1 }
|
|
::= { nlIfIpEntry 21 }
|
|
|
|
nlIfIpSourcePort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The port of the logical interface of this end of the frame
|
|
relay link. This object is only valid when the interface
|
|
type is frame relay."
|
|
DEFVAL { 1 }
|
|
::= { nlIfIpEntry 22 }
|
|
|
|
nlIfIpSourceDLCI OBJECT-TYPE
|
|
SYNTAX INTEGER (16..991)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The DLCI of the logical interface of this end of the frame
|
|
relay link. This object is only valid when the interface
|
|
type is frame relay."
|
|
DEFVAL { 16 }
|
|
::= { nlIfIpEntry 23 }
|
|
|
|
nlIfIpRIPSupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
receive-only(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The RIP support that is being run on the interface."
|
|
DEFVAL { enabled }
|
|
::= { nlIfIpEntry 24 }
|
|
|
|
nlIfIpInverseARP OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The flag which indicates whether inverse ARP is enabled
|
|
or disabled. This object is only valid when the interface
|
|
type is frame relay."
|
|
DEFVAL { disabled }
|
|
::= { nlIfIpEntry 25 }
|
|
|
|
nlIfIpProxyARP OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The flag which indicates whether proxy ARP is enabled
|
|
or disabled. This object is only valid when the interface
|
|
type is LAN based."
|
|
DEFVAL { disabled }
|
|
::= { nlIfIpEntry 26 }
|
|
|
|
nlIfIpUnnumberedIf OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The flag which indicates whether this interface is an
|
|
unnumbered interface (i.e., does not require a specific
|
|
source IP address). This object is only valid when the
|
|
interface type is frame relay or X.25."
|
|
DEFVAL { yes }
|
|
::= { nlIfIpEntry 27 }
|
|
|
|
nlIfIpRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the nlIfIpTable and follows the SNMPv2
|
|
RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device. For a management
|
|
protocol set operation, a genErr response is returned when
|
|
the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
::= { nlIfIpEntry 28 }
|
|
|
|
--
|
|
-- The Netlink IP Interface Secondary Addresses Table
|
|
--
|
|
|
|
nlIfIpSecondaryAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NlIfIpSecondaryAddrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to define secondary IP interfaces on a
|
|
LAN (ethernet, 802.3, 802.5) interface."
|
|
::= { nlIfIpInterfaces 2 }
|
|
|
|
nlIfIpSecondaryAddrEntry OBJECT-TYPE
|
|
SYNTAX NlIfIpSecondaryAddrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An IP Secondary Address entry containing objects relating
|
|
to IP secondary addresses."
|
|
INDEX { nlIfIpInterface, nlIfIpSecondaryAddrSequence }
|
|
::= { nlIfIpSecondaryAddrTable 1 }
|
|
|
|
NlIfIpSecondaryAddrEntry ::=
|
|
SEQUENCE {
|
|
nlIfIpSecondaryAddrSequence INTEGER,
|
|
nlIfIpSecondaryAddrNetworkMask IpAddress,
|
|
nlIfIpSecondaryAddrRouteMetric INTEGER,
|
|
nlIfIpSecondaryAddrSourceAddress IpAddress,
|
|
nlIfIpSecondaryAddrBroadcastAddress IpAddress,
|
|
nlIfIpSecondaryAddrRIPSupport INTEGER,
|
|
nlIfIpSecondaryAddrRowStatus RowStatus
|
|
}
|
|
|
|
nlIfIpSecondaryAddrSequence OBJECT-TYPE
|
|
SYNTAX INTEGER (1..15)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The maximum number of secondary IP addresses that may
|
|
be configured on an interface."
|
|
::= { nlIfIpSecondaryAddrEntry 1 }
|
|
|
|
nlIfIpSecondaryAddrNetworkMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The mask used during routing to determine the portion
|
|
of the address associated with the network."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { nlIfIpSecondaryAddrEntry 2 }
|
|
|
|
nlIfIpSecondaryAddrRouteMetric OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of network hops (network gateways in the
|
|
overall path over the internet) associated with this
|
|
interface."
|
|
DEFVAL { 0 }
|
|
::= { nlIfIpSecondaryAddrEntry 3 }
|
|
|
|
nlIfIpSecondaryAddrSourceAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The IP address of the end-to-end sender."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { nlIfIpSecondaryAddrEntry 4 }
|
|
|
|
nlIfIpSecondaryAddrBroadcastAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The IP address that is used to send to all LAN hosts
|
|
on the network."
|
|
DEFVAL { '00000000'H } -- 0.0.0.0
|
|
::= { nlIfIpSecondaryAddrEntry 5 }
|
|
|
|
nlIfIpSecondaryAddrRIPSupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
enabled(2),
|
|
receive-only(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The RIP support that is being run on the interface."
|
|
DEFVAL { enabled }
|
|
::= { nlIfIpSecondaryAddrEntry 6 }
|
|
|
|
nlIfIpSecondaryAddrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion of
|
|
conceptual rows in the nlIfIpSecondaryAddrTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device. For a management
|
|
protocol set operation, a genErr response is returned when
|
|
the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
::= { nlIfIpSecondaryAddrEntry 7 }
|
|
|
|
nlIfVoiceInterfaces OBJECT IDENTIFIER ::= { nlInterfaces 5}
|
|
|
|
--
|
|
-- The Netlink Voice Interface Table
|
|
--
|
|
|
|
nlIfVoiceTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NlIfVoiceEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to define Voice interfaces over frame relay."
|
|
::= { nlIfVoiceInterfaces 1 }
|
|
|
|
nlIfVoiceEntry OBJECT-TYPE
|
|
SYNTAX NlIfVoiceEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A Voice Interface entry containing objects relating
|
|
to the interface that are configurable by the user."
|
|
INDEX { nlIfVoiceInterface }
|
|
::= { nlIfVoiceTable 1 }
|
|
|
|
NlIfVoiceEntry ::=
|
|
SEQUENCE {
|
|
nlIfVoiceInterface INTEGER,
|
|
nlIfVoicePeerNodeType INTEGER,
|
|
nlIfVoicePeerNodeNumber INTEGER,
|
|
nlIfVoicePeerNodePort INTEGER,
|
|
nlIfVoiceLocalNodeNumber INTEGER,
|
|
nlIfVoiceLocalNodePort INTEGER,
|
|
nlIfVoiceFrameRelayRlp INTEGER,
|
|
nlIfVoiceFrameRelayPort INTEGER,
|
|
nlIfVoiceFrameRelayDLCI INTEGER,
|
|
nlIfVoiceEnableFragment INTEGER,
|
|
nlIfVoiceRowStatus RowStatus
|
|
}
|
|
|
|
nlIfVoiceInterface OBJECT-TYPE
|
|
SYNTAX INTEGER (1..129)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The interface number which uniquely identifies the
|
|
interface to which this entry is applicable. The
|
|
interface identified by a particular value of this
|
|
number is NOT the same interface as defined by the
|
|
same value of ifIndex."
|
|
::= { nlIfVoiceEntry 1 }
|
|
|
|
nlIfVoicePeerNodeType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
netlink (1),
|
|
act (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The node type for the node at the remote end of the
|
|
frame relay connection."
|
|
DEFVAL { act }
|
|
::= { nlIfVoiceEntry 2 }
|
|
|
|
nlIfVoicePeerNodeNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..61)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The node number of the remote device."
|
|
DEFVAL { 1 }
|
|
::= { nlIfVoiceEntry 3 }
|
|
|
|
nlIfVoicePeerNodePort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..17)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The voice port on the remote device."
|
|
DEFVAL { 1 }
|
|
::= { nlIfVoiceEntry 4 }
|
|
|
|
nlIfVoiceLocalNodeNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (1..61)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The node number of the local device."
|
|
DEFVAL { 1 }
|
|
::= { nlIfVoiceEntry 5 }
|
|
|
|
nlIfVoiceLocalNodePort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..17)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The voice port on the local device."
|
|
DEFVAL { 1 }
|
|
::= { nlIfVoiceEntry 6 }
|
|
|
|
nlIfVoiceFrameRelayRlp OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The RLP of the logical interface of this end of the frame
|
|
relay link."
|
|
DEFVAL { 1 }
|
|
::= { nlIfVoiceEntry 7 }
|
|
|
|
nlIfVoiceFrameRelayPort OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The port of the logical interface of this end of the frame
|
|
relay link."
|
|
DEFVAL { 1 }
|
|
::= { nlIfVoiceEntry 8 }
|
|
|
|
nlIfVoiceFrameRelayDLCI OBJECT-TYPE
|
|
SYNTAX INTEGER (16..991)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The DLCI of the logical interface of this end of the frame
|
|
relay link."
|
|
DEFVAL { 16 }
|
|
::= { nlIfVoiceEntry 9 }
|
|
|
|
nlIfVoiceEnableFragment OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION ""
|
|
DEFVAL { no }
|
|
::= { nlIfVoiceEntry 10 }
|
|
|
|
nlIfVoiceRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the noIfVoiceTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device. For a management
|
|
protocol set operation, a genErr response is returned when
|
|
the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
::= { nlIfVoiceEntry 11 }
|
|
|
|
-- **************************
|
|
-- * THE SUBSCRIBER GROUP *
|
|
-- **************************
|
|
|
|
subscriber OBJECT IDENTIFIER ::= { local 5 }
|
|
|
|
--
|
|
-- The Netlink Local Subscriber Table
|
|
--
|
|
|
|
nlLocalSubscriberTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NlLocalSubscriberEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to define each local subscriber."
|
|
::= { subscriber 1 }
|
|
|
|
nlLocalSubscriberEntry OBJECT-TYPE
|
|
SYNTAX NlLocalSubscriberEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Local Subscriber entry containing objects relating
|
|
to local subscribers."
|
|
INDEX { nlLocalSubscriberId }
|
|
::= { nlLocalSubscriberTable 1 }
|
|
|
|
NlLocalSubscriberEntry ::=
|
|
SEQUENCE {
|
|
nlLocalSubscriberId NlSubscriberAddress,
|
|
nlLocalSubscriberName DisplayString,
|
|
nlLocalSubscriberAlgorithm INTEGER,
|
|
nlLocalSubscriberSystematicRedirect INTEGER,
|
|
nlLocalSubscriberRedirectBusy INTEGER,
|
|
nlLocalSubscriberRedirectOO INTEGER,
|
|
nlLocalSubscriberPriority INTEGER,
|
|
nlLocalSubscriberRowStatus RowStatus
|
|
}
|
|
|
|
nlLocalSubscriberId OBJECT-TYPE
|
|
SYNTAX NlSubscriberAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Subscriber ID. A valid subscriber ID is a string of
|
|
numeric digits represented by their ASCII equivalents. The
|
|
ASCII equivalents of the wildcard characters '*' and '?' are
|
|
also allowed. A '*' is a wildcard that matches any number of
|
|
digits, including zero. A '?' is a wildcard that matches any single digit."
|
|
::= { nlLocalSubscriberEntry 1 }
|
|
|
|
nlLocalSubscriberName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..31))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Subscriber name. The subscriber name is not accessible from
|
|
SNMP, and a blank string is always returned."
|
|
::= { nlLocalSubscriberEntry 2 }
|
|
|
|
nlLocalSubscriberAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
round-robin(1),
|
|
line-failed(2),
|
|
line-busy(3),
|
|
least-lcn(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The Subscriber routing algorithm.
|
|
The following 4 types of routing algorithms are supported.
|
|
1 - round robin selects ports specified cyclicly in numerical
|
|
order according to the list of Redirection addresses. If the port
|
|
is unreachable or congested, the call request is sent to the next
|
|
port.
|
|
2. Alternate Route on Line Failure - selects the first port
|
|
not in a failed state. If a connection is not made, the call
|
|
will be cleared even if other ports are available.
|
|
3. Alternate Route on Line Busy - selects the first port
|
|
that has LCN's available (not busy). If a port has failed,
|
|
the next available port is selected.
|
|
4. Least LCN with throughput selects the line with the minumum
|
|
loading, calculated by weight and number of LCN's in use.
|
|
|
|
If use of a routing algorithm is not desired, accept the default
|
|
and specify only one routing path."
|
|
DEFVAL { round-robin }
|
|
::= { nlLocalSubscriberEntry 3 }
|
|
|
|
nlLocalSubscriberSystematicRedirect OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Systematic Redirection."
|
|
DEFVAL { no }
|
|
::= { nlLocalSubscriberEntry 4 }
|
|
|
|
nlLocalSubscriberRedirectBusy OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Redirect calls according to Redirection Addresses if the
|
|
primary subscriber device is busy."
|
|
DEFVAL { no }
|
|
::= { nlLocalSubscriberEntry 5 }
|
|
|
|
nlLocalSubscriberRedirectOO OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Redirect calls according to Redirection Addresses if the
|
|
primary subscriber device is out of order."
|
|
DEFVAL { no }
|
|
::= { nlLocalSubscriberEntry 6 }
|
|
|
|
nlLocalSubscriberPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..9)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Allows setting a priority for traffic within the node."
|
|
DEFVAL { 0 }
|
|
::= { nlLocalSubscriberEntry 7 }
|
|
|
|
nlLocalSubscriberRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the nlLocalSubscriberTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device. For a management
|
|
protocol set operation, a genErr response is returned when
|
|
the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
|
|
::= { nlLocalSubscriberEntry 8 }
|
|
|
|
-- Routing Paths Table.
|
|
|
|
nlLocalSubscriberRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NlLocalSubscriberRouteEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to define local subscriber route paths."
|
|
::= { subscriber 2 }
|
|
|
|
nlLocalSubscriberRouteEntry OBJECT-TYPE
|
|
SYNTAX NlLocalSubscriberRouteEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Local Subscriber Route entry containing objects relating
|
|
to local subscriber routes."
|
|
INDEX { nlLocalSubscriberId, nlLocalSubscriberRouteIndex}
|
|
::= { nlLocalSubscriberRouteTable 1 }
|
|
|
|
NlLocalSubscriberRouteEntry ::=
|
|
SEQUENCE {
|
|
nlLocalSubscriberRouteIndex INTEGER,
|
|
nlLocalSubscriberRouteConf INTEGER,
|
|
nlLocalSubscriberRouteLP INTEGER,
|
|
nlLocalSubscriberRoutePort INTEGER,
|
|
nlLocalSubscriberRouteRowStatus RowStatus
|
|
}
|
|
|
|
nlLocalSubscriberRouteIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..8)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Route path index for a specific subscriber route path."
|
|
::= { nlLocalSubscriberRouteEntry 1 }
|
|
|
|
nlLocalSubscriberRouteConf OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no(1),
|
|
yes(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Flag to indicate if the LP/port routing path to the
|
|
subscriber device is configured or not. This object is read-
|
|
only. The route is always configured for an entry in the table."
|
|
::= { nlLocalSubscriberRouteEntry 2 }
|
|
|
|
nlLocalSubscriberRouteLP OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Instance of the LP that makes up the routing path"
|
|
::= { nlLocalSubscriberRouteEntry 3 }
|
|
|
|
nlLocalSubscriberRoutePort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Instance of the port that makes up the routing path"
|
|
::= { nlLocalSubscriberRouteEntry 4 }
|
|
|
|
nlLocalSubscriberRouteRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the nlLocalSubscriberRouteTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device. For a management
|
|
protocol set operation, a genErr response is returned when
|
|
the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
|
|
::= { nlLocalSubscriberRouteEntry 5 }
|
|
|
|
--- Redirection Address table.
|
|
|
|
nlLocalSubscriberRedirTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NlLocalSubscriberRedirEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to list local subscriber redirection addresses."
|
|
::= { subscriber 3 }
|
|
|
|
nlLocalSubscriberRedirEntry OBJECT-TYPE
|
|
SYNTAX NlLocalSubscriberRedirEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Local Subscriber Redirection Address entry containing
|
|
objects relating to local subscriber redirection addresses."
|
|
INDEX { nlLocalSubscriberId, nlLocalSubscriberRedirIndex }
|
|
::= { nlLocalSubscriberRedirTable 1 }
|
|
|
|
NlLocalSubscriberRedirEntry ::=
|
|
SEQUENCE {
|
|
nlLocalSubscriberRedirIndex INTEGER,
|
|
nlLocalSubscriberRedirAddr NlSubscriberAddress,
|
|
nlLocalSubscriberRedirRowStatus RowStatus
|
|
}
|
|
|
|
nlLocalSubscriberRedirIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..5)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Redirection entry index for a local subscriber."
|
|
::= { nlLocalSubscriberRedirEntry 1 }
|
|
|
|
nlLocalSubscriberRedirAddr OBJECT-TYPE
|
|
SYNTAX NlSubscriberAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Subscriber redirection address."
|
|
::= { nlLocalSubscriberRedirEntry 2 }
|
|
|
|
nlLocalSubscriberRedirRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the nlLocalSubscriberRedirTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device. For a management
|
|
protocol set operation, a genErr response is returned when
|
|
the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
::= { nlLocalSubscriberRedirEntry 3 }
|
|
|
|
-- ********************
|
|
-- * THE LLC2 GROUP *
|
|
-- ********************
|
|
|
|
llc2 OBJECT IDENTIFIER ::= { local 6 }
|
|
|
|
--
|
|
-- The Netlink LLC2 Host Table
|
|
--
|
|
|
|
nlLlc2HostTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NlLlc2HostEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to define LLC2 host entries."
|
|
::= { llc2 1 }
|
|
|
|
nlLlc2HostEntry OBJECT-TYPE
|
|
SYNTAX NlLlc2HostEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An LLC2 Host entry containing objects relating to
|
|
LLC2 hosts."
|
|
INDEX { nlLlc2HostGroup, nlLlc2HostIndex }
|
|
::= { nlLlc2HostTable 1 }
|
|
|
|
NlLlc2HostEntry ::=
|
|
SEQUENCE {
|
|
nlLlc2HostIndex INTEGER,
|
|
nlLlc2HostMACAddress MacAddress,
|
|
nlLlc2HostSessionType INTEGER,
|
|
nlLlc2HostT1ReplyTimer TimeInterval,
|
|
nlLlc2HostT2RecvAckTimer TimeInterval,
|
|
nlLlc2HostTiInactivityTimer TimeInterval,
|
|
nlLlc2HostN3NumberLPDUs INTEGER,
|
|
nlLlc2HostTwNumberOutstanding INTEGER,
|
|
nlLlc2HostN2ExpiredT1LPDUCount INTEGER,
|
|
nlLlc2HostPriority INTEGER,
|
|
nlLlc2HostBAG INTEGER,
|
|
nlLlc2HostRoutingSubscriberId NlSubscriberAddress,
|
|
nlLlc2HostSrcMACAddressMask MacAddress,
|
|
nlLlc2HostAccess INTEGER,
|
|
nlLlc2HostRowStatus RowStatus,
|
|
nlLlc2HostInterface INTEGER,
|
|
nlLlc2HostGroup INTEGER
|
|
}
|
|
|
|
nlLlc2HostIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..251)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LLC2 Host Index"
|
|
::= { nlLlc2HostEntry 1 }
|
|
|
|
nlLlc2HostMACAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The LLC2 Host MAC Address."
|
|
DEFVAL { '400000000001'H } -- 40:00:00:00:00:01
|
|
::= { nlLlc2HostEntry 2 }
|
|
|
|
nlLlc2HostSessionType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
originated(1),
|
|
terminated(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The mode in which the Host is operating"
|
|
DEFVAL { terminated }
|
|
::= { nlLlc2HostEntry 3 }
|
|
|
|
nlLlc2HostT1ReplyTimer OBJECT-TYPE
|
|
SYNTAX TimeInterval (1..250)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Reply Timer used to detect a failure of the Remote node."
|
|
DEFVAL { 10 }
|
|
::= { nlLlc2HostEntry 4 }
|
|
|
|
nlLlc2HostT2RecvAckTimer OBJECT-TYPE
|
|
SYNTAX TimeInterval (100..5000)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Receive Ack Timer used to delay sending an
|
|
acknowledgement of a received information LPDU."
|
|
DEFVAL { 100 }
|
|
::= { nlLlc2HostEntry 5 }
|
|
|
|
nlLlc2HostTiInactivityTimer OBJECT-TYPE
|
|
SYNTAX TimeInterval (1..50)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Timer used to detect inoperative condition of the
|
|
remote link station or transmission medium."
|
|
DEFVAL { 30 }
|
|
::= { nlLlc2HostEntry 6 }
|
|
|
|
nlLlc2HostN3NumberLPDUs OBJECT-TYPE
|
|
SYNTAX INTEGER (1..127)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of Information LPDUs that need to be received
|
|
before an acknowledgement is sent."
|
|
DEFVAL { 3 }
|
|
::= { nlLlc2HostEntry 7 }
|
|
|
|
nlLlc2HostTwNumberOutstanding OBJECT-TYPE
|
|
SYNTAX INTEGER (1..127)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Maximum number of sequentially numbered information
|
|
LPDUs that can be outstanding at any time."
|
|
DEFVAL { 7 }
|
|
::= { nlLlc2HostEntry 8 }
|
|
|
|
nlLlc2HostN2ExpiredT1LPDUCount OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Maximum number of LPDU retransmissions occur following
|
|
the expiration of Timer T1."
|
|
DEFVAL { 8 }
|
|
::= { nlLlc2HostEntry 9 }
|
|
|
|
nlLlc2HostPriority OBJECT-TYPE
|
|
SYNTAX INTEGER (0..9)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Traffic priorities within the node."
|
|
DEFVAL { 0 }
|
|
::= { nlLlc2HostEntry 10 }
|
|
|
|
nlLlc2HostBAG OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Bandwidth Allocation group to which the LLC2 Host belongs.
|
|
This object is read-only. Bandwidth allocation groups do not apply
|
|
to LLC2 hosts."
|
|
DEFVAL { 1 }
|
|
::= { nlLlc2HostEntry 11 }
|
|
|
|
nlLlc2HostRoutingSubscriberId OBJECT-TYPE
|
|
SYNTAX NlSubscriberAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "LLC2 hosts Routing Subscriber Id"
|
|
::= { nlLlc2HostEntry 12 }
|
|
|
|
nlLlc2HostSrcMACAddressMask OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "LLC2 Host's Source MAC Address Mask"
|
|
DEFVAL { '000000000000'H } -- 00:00:00:00:00:00
|
|
::= { nlLlc2HostEntry 13 }
|
|
|
|
nlLlc2HostAccess OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
lan(1),
|
|
frameRelay(2),
|
|
tokenRing(3),
|
|
ethernet(4),
|
|
all(5),
|
|
not-applicable(6)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies different type(s) of interface(s) that can be
|
|
used for connections to a terminated host session."
|
|
DEFVAL { not-applicable }
|
|
::= { nlLlc2HostEntry 14 }
|
|
|
|
nlLlc2HostRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Row status convention for LLC2 Host entry."
|
|
::= { nlLlc2HostEntry 15 }
|
|
|
|
nlLlc2HostInterface OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LLC2 interface number associated with this host entry, always
|
|
300 for non-FRX7000."
|
|
DEFVAL { 300 }
|
|
::= { nlLlc2HostEntry 16 }
|
|
|
|
nlLlc2HostGroup OBJECT-TYPE
|
|
SYNTAX INTEGER (1..4)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Traffic group associated with LLC2 interface, always 1 for
|
|
non-FRX7000."
|
|
::= { nlLlc2HostEntry 17 }
|
|
|
|
-- LLC2 Terminated Host Connection Table.
|
|
--
|
|
nlLlc2TermConnectionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NlLlc2TermConnectionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to describe LLC2 Terminated Host Connections."
|
|
::= { llc2 2 }
|
|
|
|
nlLlc2TermConnectionEntry OBJECT-TYPE
|
|
SYNTAX NlLlc2TermConnectionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An LLC2 Terminated Host Connection entry containing
|
|
objects relating to LLC2 terminated host connections."
|
|
INDEX { nlLlc2HostGroup, nlLlc2HostIndex, nlLlc2TermConnectionSequence }
|
|
::= { nlLlc2TermConnectionTable 1 }
|
|
|
|
NlLlc2TermConnectionEntry ::=
|
|
SEQUENCE {
|
|
nlLlc2TermConnectionSequence INTEGER,
|
|
nlLlc2TermConnectionHSAP INTEGER,
|
|
nlLlc2TermConnectionLocalSubscriberId NlSubscriberAddress,
|
|
nlLlc2TermConnectionRemoteSubscriberId NlSubscriberAddress,
|
|
nlLlc2TermConnectionRowStatus RowStatus
|
|
}
|
|
|
|
nlLlc2TermConnectionSequence OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LLC2 Host connection Sequence number"
|
|
::= { nlLlc2TermConnectionEntry 1 }
|
|
|
|
nlLlc2TermConnectionHSAP OBJECT-TYPE
|
|
SYNTAX INTEGER (4..254)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Service Access point used to connect to the Host"
|
|
DEFVAL { 4 }
|
|
::= { nlLlc2TermConnectionEntry 2 }
|
|
|
|
nlLlc2TermConnectionLocalSubscriberId OBJECT-TYPE
|
|
SYNTAX NlSubscriberAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "LLC2 Host Connection's Local Subscriber Id"
|
|
::= { nlLlc2TermConnectionEntry 3 }
|
|
|
|
nlLlc2TermConnectionRemoteSubscriberId OBJECT-TYPE
|
|
SYNTAX NlSubscriberAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "LLC2 Host Connection's Remote Subscriber Id"
|
|
::= { nlLlc2TermConnectionEntry 4 }
|
|
|
|
nlLlc2TermConnectionRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the nlLlc2TermConnectionTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device. For a management
|
|
protocol set operation, a genErr response is returned when
|
|
the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
::= { nlLlc2TermConnectionEntry 5 }
|
|
|
|
-- LLC2 Originated Host Connection Table.
|
|
--
|
|
nlLlc2OrigConnectionTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF NlLlc2OrigConnectionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to describe LLC2 Originated Host Connections."
|
|
::= { llc2 3 }
|
|
|
|
nlLlc2OrigConnectionEntry OBJECT-TYPE
|
|
SYNTAX NlLlc2OrigConnectionEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An LLC2 Originated Host Connection entry containing
|
|
objects relating to LLC2 originated host connections."
|
|
INDEX { nlLlc2HostGroup, nlLlc2HostIndex, nlLlc2OrigConnectionSequence }
|
|
::= { nlLlc2OrigConnectionTable 1 }
|
|
|
|
NlLlc2OrigConnectionEntry ::=
|
|
SEQUENCE {
|
|
nlLlc2OrigConnectionSequence INTEGER,
|
|
nlLlc2OrigConnectionHSAP INTEGER,
|
|
nlLlc2OrigConnectionType INTEGER,
|
|
nlLlc2OrigConnectionLocalSubscriberId NlSubscriberAddress,
|
|
nlLlc2OrigConnectionRemoteSubscriberId NlSubscriberAddress,
|
|
nlLlc2OrigConnectionIDBLK INTEGER,
|
|
nlLlc2OrigConnectionIDNUM INTEGER,
|
|
nlLlc2OrigConnectionMAXDATA INTEGER,
|
|
nlLlc2OrigConnectionMAXIN INTEGER,
|
|
nlLlc2OrigConnectionRowStatus RowStatus
|
|
}
|
|
|
|
nlLlc2OrigConnectionSequence OBJECT-TYPE
|
|
SYNTAX INTEGER (1..16)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "LLC2 Host connection Sequence number"
|
|
::= { nlLlc2OrigConnectionEntry 1 }
|
|
|
|
nlLlc2OrigConnectionHSAP OBJECT-TYPE
|
|
SYNTAX INTEGER (4..254)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Service Access point used to connect to the Host"
|
|
DEFVAL { 4 }
|
|
::= { nlLlc2OrigConnectionEntry 2 }
|
|
|
|
nlLlc2OrigConnectionType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sdlc(1),
|
|
llc2(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "Specifies Remote subscriber device type"
|
|
DEFVAL { llc2 }
|
|
::= { nlLlc2OrigConnectionEntry 3 }
|
|
|
|
nlLlc2OrigConnectionLocalSubscriberId OBJECT-TYPE
|
|
SYNTAX NlSubscriberAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "LLC2 Host Connection's Local Subscriber Id"
|
|
::= { nlLlc2OrigConnectionEntry 4 }
|
|
|
|
nlLlc2OrigConnectionRemoteSubscriberId OBJECT-TYPE
|
|
SYNTAX NlSubscriberAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "LLC2 Host Connection's Remote Subscriber Id"
|
|
::= { nlLlc2OrigConnectionEntry 5 }
|
|
|
|
nlLlc2OrigConnectionIDBLK OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "This field is obsolete"
|
|
DEFVAL { 0 }
|
|
::= { nlLlc2OrigConnectionEntry 6 }
|
|
|
|
nlLlc2OrigConnectionIDNUM OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "This field is obsolete"
|
|
DEFVAL { 0 }
|
|
::= { nlLlc2OrigConnectionEntry 7 }
|
|
|
|
nlLlc2OrigConnectionMAXDATA OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "This field is obsolete"
|
|
DEFVAL { 0 }
|
|
::= { nlLlc2OrigConnectionEntry 8 }
|
|
|
|
nlLlc2OrigConnectionMAXIN OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "This field is obsolete"
|
|
DEFVAL { 0 }
|
|
::= { nlLlc2OrigConnectionEntry 9 }
|
|
|
|
nlLlc2OrigConnectionRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the nlLlc2OrigConnectionTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device. For a management
|
|
protocol set operation, a genErr response is returned when
|
|
the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
::= { nlLlc2OrigConnectionEntry 10 }
|
|
|
|
nlLlc2NextHostNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The host number to be used for the next created
|
|
host record, always 1 on non-FRX7000."
|
|
DEFVAL { 1 }
|
|
::= { llc2 4 }
|
|
|
|
-- **********************
|
|
-- * THE STATUS GROUP *
|
|
-- **********************
|
|
|
|
status OBJECT IDENTIFIER ::= { local 7 }
|
|
|
|
--
|
|
-- The Port Pin Status Table
|
|
--
|
|
|
|
pinStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortPinEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to describe the status of each pin on a
|
|
physical port. This table is indexed by RLP and Port"
|
|
::= { status 4 }
|
|
|
|
portPinEntry OBJECT-TYPE
|
|
SYNTAX PortPinEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A port pin entry containing objects relating to ports."
|
|
INDEX { portPinRlp,portPinPort }
|
|
::= { pinStatusTable 1 }
|
|
|
|
PortPinEntry ::=
|
|
SEQUENCE {
|
|
portPinRlp
|
|
INTEGER,
|
|
portPinPort
|
|
INTEGER,
|
|
portPinStatus
|
|
OCTET STRING
|
|
}
|
|
|
|
portPinRlp OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The RLP number on the node"
|
|
::= { portPinEntry 1 }
|
|
|
|
portPinPort OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Port number on the RLP. Port numbers 0-7 are
|
|
known to be physical ports."
|
|
::= { portPinEntry 2 }
|
|
|
|
portPinStatus OBJECT-TYPE
|
|
SYNTAX OCTET STRING
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The status of all pins for this physical port. There
|
|
is one octet value for each of the pins. Each octet value is defined
|
|
as follows:
|
|
00 = unknown
|
|
01 = active
|
|
02 = inactive
|
|
03 = unused "
|
|
::= { portPinEntry 3 }
|
|
|
|
-- **************************
|
|
-- * THE STATISTICS GROUP *
|
|
-- **************************
|
|
|
|
statistics OBJECT IDENTIFIER ::= { local 8 }
|
|
statGroup OBJECT IDENTIFIER ::= { statistics 1 }
|
|
|
|
--
|
|
-- The RLP Statistics group define the RLPStats Table
|
|
--
|
|
|
|
rlpStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlpStatsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to describe Statistics on each RLP"
|
|
::= { statGroup 2 }
|
|
|
|
rlpStatsEntry OBJECT-TYPE
|
|
SYNTAX RlpStatsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An RLP statistics entry containing objects relating
|
|
to RLP statistics."
|
|
INDEX { rlpStatsIndex }
|
|
::= { rlpStatsTable 1 }
|
|
|
|
RlpStatsEntry ::=
|
|
SEQUENCE {
|
|
rlpStatsIndex
|
|
INTEGER,
|
|
rlpStatsUsedBuffers
|
|
Counter,
|
|
rlpStatsQMessages
|
|
Counter,
|
|
rlpStatsInFrames
|
|
Counter,
|
|
rlpStatsOutFrames
|
|
Counter,
|
|
rlpStatsFrameRejects
|
|
Counter,
|
|
rlpStatsFrameRetransmits
|
|
Counter
|
|
}
|
|
rlpStatsIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The RLP number"
|
|
::= { rlpStatsEntry 1 }
|
|
|
|
rlpStatsQMessages OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of frames queued on the RLP"
|
|
::= { rlpStatsEntry 2 }
|
|
|
|
rlpStatsUsedBuffers OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The percentage of total buffers available being used at
|
|
the moment of inquiry"
|
|
::= { rlpStatsEntry 3 }
|
|
|
|
rlpStatsInFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of frames received."
|
|
::= { rlpStatsEntry 4 }
|
|
|
|
rlpStatsOutFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of frames transmitted."
|
|
::= { rlpStatsEntry 5 }
|
|
|
|
rlpStatsFrameRejects OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of frames rejected."
|
|
::= { rlpStatsEntry 6 }
|
|
|
|
rlpStatsFrameRetransmits OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of frames retransmitted . If
|
|
this value is consistently greater than zero and there are no other
|
|
problems, then increase the retransmission parameter."
|
|
::= { rlpStatsEntry 7 }
|
|
|
|
--
|
|
-- The Port Statistics group define the portStats Table
|
|
--
|
|
|
|
portStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortStatsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to describe Statistics on each RLP"
|
|
::= { statGroup 3 }
|
|
|
|
portStatsEntry OBJECT-TYPE
|
|
SYNTAX PortStatsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A port statistics entry containing objects relating
|
|
to port statistics."
|
|
INDEX { portStatsRlpIndex, portStatsIndex }
|
|
::= { portStatsTable 1 }
|
|
|
|
PortStatsEntry ::=
|
|
SEQUENCE {
|
|
portStatsRlpIndex
|
|
INTEGER,
|
|
portStatsIndex
|
|
INTEGER,
|
|
portStatsInFrames
|
|
Counter,
|
|
portStatsOutFrames
|
|
Counter,
|
|
portStatsFrameRetrans
|
|
Counter,
|
|
portStatsFCSErrors
|
|
Counter,
|
|
portStatsLogicalRejects
|
|
Counter,
|
|
portStatsInPercentUtils
|
|
Counter,
|
|
portStatsOutPercentUtils
|
|
Counter
|
|
}
|
|
|
|
portStatsRlpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The RLP number"
|
|
::= { portStatsEntry 1 }
|
|
|
|
portStatsIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Port number"
|
|
::= { portStatsEntry 2 }
|
|
|
|
portStatsInFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of frames received."
|
|
::= { portStatsEntry 3 }
|
|
|
|
portStatsOutFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of frames transmitted."
|
|
::= { portStatsEntry 4 }
|
|
|
|
portStatsFrameRetrans OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of frames retransmitted."
|
|
::= { portStatsEntry 5 }
|
|
|
|
portStatsFCSErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of Frame Check Sequence (FCS) errors.
|
|
A value consistently greater than zero indicates line probelms."
|
|
::= { portStatsEntry 6 }
|
|
|
|
portStatsLogicalRejects OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The sum of Rejects and Frame Rejects.
|
|
A value consistently greater than zero indicates line probelms."
|
|
::= { portStatsEntry 7 }
|
|
|
|
portStatsInPercentUtils OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The ratio of non-flag characters to total characters
|
|
being received by the port."
|
|
::= { portStatsEntry 8 }
|
|
|
|
portStatsOutPercentUtils OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The ration of non-flag characters to total characters
|
|
being transmitted by the port."
|
|
::= { portStatsEntry 9 }
|
|
|
|
statFrame OBJECT IDENTIFIER ::= { statGroup 4 }
|
|
|
|
--
|
|
-- The Frame Relay Frame Level Statistics group defines the FlvFRStats Table
|
|
--
|
|
|
|
frStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FrStatsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to describe Frame Relay Frame Level Statistics on each Port"
|
|
::= { statFrame 1}
|
|
|
|
frStatsEntry OBJECT-TYPE
|
|
SYNTAX FrStatsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A frame relay port statistics entry containing objects
|
|
relating to frame relay port statistics."
|
|
INDEX { frStatsRlpIndex, frStatsPortIndex }
|
|
::= { frStatsTable 1 }
|
|
|
|
FrStatsEntry ::=
|
|
SEQUENCE {
|
|
frStatsRlpIndex
|
|
INTEGER,
|
|
frStatsPortIndex
|
|
INTEGER,
|
|
frStatsRxDEFrames
|
|
Counter,
|
|
frStatsTxDEFrames
|
|
Counter,
|
|
frStatsTxFECNFrames
|
|
Counter,
|
|
frStatsRxFECNFrames
|
|
Counter,
|
|
frStatsTxBECNFrames
|
|
Counter,
|
|
frStatsRxBECNFrames
|
|
Counter,
|
|
frStatsTxLMIFrames
|
|
Counter,
|
|
frStatsRxLMIFrames
|
|
Counter,
|
|
frStatsTxANXDFrames
|
|
Counter,
|
|
frStatsRxANXDFrames
|
|
Counter,
|
|
frStatsTotDiscFrames
|
|
Counter
|
|
-- For the current time, we don't separate Discarded Frames
|
|
-- frStatsTxDiscFrames
|
|
-- Counter,
|
|
-- frStatsRxDiscFrames
|
|
-- Counter
|
|
}
|
|
frStatsRlpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The RLP Number."
|
|
::= { frStatsEntry 1 }
|
|
|
|
frStatsPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Port number."
|
|
::= { frStatsEntry 2 }
|
|
|
|
frStatsTxDEFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of frames transmitted on the port with the
|
|
Discard Eligibility bit set."
|
|
::= { frStatsEntry 3 }
|
|
|
|
frStatsRxDEFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of frames received on the port with the discard
|
|
eligibility bit set."
|
|
::= { frStatsEntry 4 }
|
|
|
|
frStatsTxFECNFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The of number of frames transmitted on the port with FECN."
|
|
::= { frStatsEntry 5 }
|
|
|
|
frStatsRxFECNFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of frames received on the port with FECN."
|
|
::= { frStatsEntry 6 }
|
|
|
|
frStatsTxBECNFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of frames transmitted on the port with BECN."
|
|
::= { frStatsEntry 7 }
|
|
|
|
frStatsRxBECNFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of frames received on the port with BECN."
|
|
::= { frStatsEntry 8 }
|
|
|
|
frStatsTxLMIFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of LMI frames transmitted on the port."
|
|
::= { frStatsEntry 9 }
|
|
|
|
frStatsRxLMIFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of LMI frames received on the port."
|
|
::= { frStatsEntry 10 }
|
|
|
|
frStatsTxANXDFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of AnnexD frames transmitted on the port"
|
|
::= { frStatsEntry 11 }
|
|
--
|
|
frStatsRxANXDFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of AnnexD frames received on the port"
|
|
::= { frStatsEntry 12 }
|
|
--
|
|
frStatsTotDiscFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The total number of discarded frames on the port."
|
|
::= { frStatsEntry 13 }
|
|
--
|
|
-- frStatsRxDiscFrames OBJECT-TYPE
|
|
-- SYNTAX Counter
|
|
-- ACCESS read-only
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION "The number of INFO Frames transmitted on the port"
|
|
-- ::= { frStatsEntry 14 }
|
|
--
|
|
-- The X25 Frame Level Tx Statistics group define the FlvX25TxStats Table
|
|
--
|
|
|
|
x25TxStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF X25TxStatsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to describe X25 Frame Level Txmit Statistics on each Port"
|
|
::= { statFrame 2 }
|
|
|
|
x25TxStatsEntry OBJECT-TYPE
|
|
SYNTAX X25TxStatsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An X25 frame level transmit statistics entry containing
|
|
objects relating to x25 frame level transmit statistics."
|
|
INDEX { x25TxRlpIndex, x25TxPortIndex }
|
|
::= { x25TxStatsTable 1 }
|
|
|
|
X25TxStatsEntry ::=
|
|
SEQUENCE {
|
|
x25TxRlpIndex
|
|
INTEGER,
|
|
x25TxPortIndex
|
|
INTEGER,
|
|
x25TxSABMFrames
|
|
Counter,
|
|
x25TxUAFrames
|
|
Counter,
|
|
x25TxDISCFrames
|
|
Counter,
|
|
x25TxDMFrames
|
|
Counter,
|
|
x25TxFRMRFrames
|
|
Counter,
|
|
x25TxREJFrames
|
|
Counter,
|
|
x25TxRRFrames
|
|
Counter,
|
|
x25TxRNRFrames
|
|
Counter,
|
|
x25TxINFOFrames
|
|
Counter
|
|
}
|
|
x25TxRlpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The RLP Number."
|
|
::= { x25TxStatsEntry 1 }
|
|
|
|
x25TxPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Port number."
|
|
::= { x25TxStatsEntry 2 }
|
|
|
|
x25TxSABMFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of SABM's transmitted on the port."
|
|
::= { x25TxStatsEntry 3 }
|
|
|
|
x25TxUAFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of UA Frames transmitted on the port."
|
|
::= { x25TxStatsEntry 4 }
|
|
|
|
x25TxDISCFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of DISC Frames transmitted on the port."
|
|
::= { x25TxStatsEntry 5 }
|
|
|
|
x25TxDMFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of DM frames transmitted on the port."
|
|
::= { x25TxStatsEntry 6 }
|
|
|
|
x25TxFRMRFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The of Number of FRMR frames transmitted on the port."
|
|
::= { x25TxStatsEntry 7 }
|
|
|
|
x25TxREJFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of Reject Frames transmitted on the port."
|
|
::= { x25TxStatsEntry 8 }
|
|
|
|
x25TxRRFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of RR frames transmitted on the port."
|
|
::= { x25TxStatsEntry 9 }
|
|
|
|
x25TxRNRFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of RNR Frames transmitted on the port."
|
|
::= { x25TxStatsEntry 10 }
|
|
|
|
x25TxINFOFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of INFO Frames transmitted on the port"
|
|
::= { x25TxStatsEntry 11 }
|
|
--
|
|
-- The X25 Frame Level Rx Statistics group define the FlvX25RxStats Table
|
|
--
|
|
|
|
x25RxStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF X25RxStatsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to describe X25 Frame Level Rxmit Statistics on each Port"
|
|
::= { statFrame 3 }
|
|
|
|
x25RxStatsEntry OBJECT-TYPE
|
|
SYNTAX X25RxStatsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An X25 frame level receive statistics entry containing
|
|
objects relating to x25 frame level receive statistics."
|
|
INDEX { x25RxRlpIndex, x25RxPortIndex }
|
|
::= { x25RxStatsTable 1 }
|
|
|
|
X25RxStatsEntry ::=
|
|
SEQUENCE {
|
|
x25RxRlpIndex
|
|
INTEGER,
|
|
x25RxPortIndex
|
|
INTEGER,
|
|
x25RxSABMFrames
|
|
Counter,
|
|
x25RxUAFrames
|
|
Counter,
|
|
x25RxDISCFrames
|
|
Counter,
|
|
x25RxDMFrames
|
|
Counter,
|
|
x25RxFRMRFrames
|
|
Counter,
|
|
x25RxREJFrames
|
|
Counter,
|
|
x25RxRRFrames
|
|
Counter,
|
|
x25RxRNRFrames
|
|
Counter,
|
|
x25RxINFOFrames
|
|
Counter
|
|
}
|
|
x25RxRlpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The RLP Number."
|
|
::= { x25RxStatsEntry 1 }
|
|
|
|
x25RxPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Port number."
|
|
::= { x25RxStatsEntry 2 }
|
|
|
|
x25RxSABMFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of SABM's received on the port."
|
|
::= { x25RxStatsEntry 3 }
|
|
|
|
x25RxUAFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of UA Frames received on the port."
|
|
::= { x25RxStatsEntry 4 }
|
|
|
|
x25RxDISCFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of DISC Frames received on the port."
|
|
::= { x25RxStatsEntry 5 }
|
|
|
|
x25RxDMFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of DM frames received on the port."
|
|
::= { x25RxStatsEntry 6 }
|
|
|
|
x25RxFRMRFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The of Number of FRMR frames received on the port."
|
|
::= { x25RxStatsEntry 7 }
|
|
|
|
x25RxREJFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of Reject Frames received on the port."
|
|
::= { x25RxStatsEntry 8 }
|
|
|
|
x25RxRRFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of RR frames received on the port."
|
|
::= { x25RxStatsEntry 9 }
|
|
|
|
x25RxRNRFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of RNR Frames received on the port."
|
|
::= { x25RxStatsEntry 10 }
|
|
|
|
x25RxINFOFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of INFO Frames received on the port"
|
|
::= { x25RxStatsEntry 11 }
|
|
|
|
statBag OBJECT IDENTIFIER ::= { statGroup 5 }
|
|
statIp OBJECT IDENTIFIER ::= { statGroup 6 }
|
|
statT1 OBJECT IDENTIFIER ::= { statGroup 7 }
|
|
|
|
-- The statistics group for T1 Channels.
|
|
|
|
t1StatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF T1StatsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to describe T1 Statistics."
|
|
::= { statT1 1}
|
|
|
|
t1StatsEntry OBJECT-TYPE
|
|
SYNTAX T1StatsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A T1 port statistics entry containing objects relating
|
|
to T1 port statistics."
|
|
INDEX { t1StatsRlpIndex, t1StatsPortIndex }
|
|
::= { t1StatsTable 1 }
|
|
|
|
T1StatsEntry ::=
|
|
SEQUENCE {
|
|
t1StatsRlpIndex
|
|
INTEGER,
|
|
t1StatsPortIndex
|
|
INTEGER,
|
|
t1StatsRcvFrames
|
|
Counter,
|
|
t1StatsXmitFrames
|
|
Counter,
|
|
t1StatsLCVCnt
|
|
Counter,
|
|
t1StatsPCVRErrs
|
|
Counter,
|
|
t1StatsOOSCnt
|
|
Counter,
|
|
t1StatsBlueAlarms
|
|
Counter,
|
|
t1StatsYellowAlarms
|
|
Counter,
|
|
t1StatsRedAlarms
|
|
Counter,
|
|
t1StatsRcvUsage
|
|
Counter,
|
|
t1StatsXmitUsage
|
|
Counter,
|
|
t1StatsXmitAbortFrames
|
|
Counter,
|
|
t1StatsRcvAbortFrames
|
|
Counter,
|
|
t1StatsRcvOverruns
|
|
Counter,
|
|
t1StatsRcvErrors
|
|
Counter,
|
|
t1StatsRcvChannelErrors
|
|
Counter
|
|
}
|
|
|
|
t1StatsRlpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The RLP Number."
|
|
::= { t1StatsEntry 1 }
|
|
|
|
t1StatsPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Port Number."
|
|
::= { t1StatsEntry 2 }
|
|
|
|
t1StatsRcvFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total received frames."
|
|
::= { t1StatsEntry 3 }
|
|
|
|
t1StatsXmitFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total transmitted frames."
|
|
::= { t1StatsEntry 4 }
|
|
|
|
t1StatsLCVCnt OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Line code violation count."
|
|
::= { t1StatsEntry 5 }
|
|
|
|
t1StatsPCVRErrs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "PCVR Bit error count."
|
|
::= { t1StatsEntry 6 }
|
|
|
|
t1StatsOOSCnt OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Multiframe out of sync count."
|
|
::= { t1StatsEntry 7 }
|
|
|
|
t1StatsBlueAlarms OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Blue alarm count."
|
|
::= { t1StatsEntry 8 }
|
|
|
|
t1StatsYellowAlarms OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Yellow alarm count."
|
|
::= { t1StatsEntry 9 }
|
|
|
|
t1StatsRedAlarms OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Red alarm count."
|
|
::= { t1StatsEntry 10 }
|
|
|
|
t1StatsRcvUsage OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Receive port utilization."
|
|
::= { t1StatsEntry 11 }
|
|
|
|
t1StatsXmitUsage OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Transmit port utilization."
|
|
::= { t1StatsEntry 12 }
|
|
|
|
t1StatsXmitAbortFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total aborted transmit frames."
|
|
::= { t1StatsEntry 13 }
|
|
|
|
t1StatsRcvAbortFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total aborted receive frames."
|
|
::= { t1StatsEntry 14 }
|
|
|
|
t1StatsRcvOverruns OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total receive overruns."
|
|
::= { t1StatsEntry 15 }
|
|
|
|
t1StatsRcvErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total bad receives."
|
|
::= { t1StatsEntry 16 }
|
|
|
|
t1StatsRcvChannelErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total bad receives."
|
|
::= { t1StatsEntry 17 }
|
|
|
|
-- The statistics group for DS0A.
|
|
|
|
statDS0A OBJECT IDENTIFIER ::= { statGroup 8 }
|
|
|
|
ds0aStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DS0AStatsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to describe DS0A Statistics."
|
|
::= { statDS0A 1}
|
|
|
|
ds0aStatsEntry OBJECT-TYPE
|
|
SYNTAX DS0AStatsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A DS0A port statistics entry containing objects relating
|
|
to DS0A port statistics."
|
|
INDEX { ds0aStatsRlpIndex, ds0aStatsPortIndex, ds0aStatsChannelIndex }
|
|
::= { ds0aStatsTable 1 }
|
|
|
|
DS0AStatsEntry ::=
|
|
SEQUENCE {
|
|
ds0aStatsRlpIndex
|
|
INTEGER,
|
|
ds0aStatsPortIndex
|
|
INTEGER,
|
|
ds0aStatsChannelIndex
|
|
INTEGER,
|
|
ds0aStatsXmitFrames
|
|
Counter,
|
|
ds0aStatsRcvFrames
|
|
Counter,
|
|
ds0aStatsRcvAbortFrames
|
|
Counter,
|
|
ds0aStatsRcvOverruns
|
|
Counter,
|
|
ds0aStatsRcvErrors
|
|
Counter
|
|
}
|
|
|
|
ds0aStatsRlpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The RLP Number."
|
|
::= { ds0aStatsEntry 1 }
|
|
|
|
ds0aStatsPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Port Number."
|
|
::= { ds0aStatsEntry 2 }
|
|
|
|
ds0aStatsChannelIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Channel Number."
|
|
::= { ds0aStatsEntry 3 }
|
|
|
|
ds0aStatsXmitFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total transmitted frames."
|
|
::= { ds0aStatsEntry 4 }
|
|
|
|
ds0aStatsRcvFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total received frames."
|
|
::= { ds0aStatsEntry 5 }
|
|
|
|
ds0aStatsRcvAbortFrames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total receive aborted frames."
|
|
::= { ds0aStatsEntry 6 }
|
|
|
|
ds0aStatsRcvOverruns OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total receive overruns."
|
|
::= { ds0aStatsEntry 7 }
|
|
|
|
ds0aStatsRcvErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "Total receive errors."
|
|
::= { ds0aStatsEntry 8 }
|
|
|
|
-- The statistics group for Voice.
|
|
statVoice OBJECT IDENTIFIER ::={ statGroup 9 }
|
|
|
|
--
|
|
-- The Voice Statistics Table
|
|
--
|
|
|
|
voiceStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VoiceStatsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to describe Voice over Frame Relay Statistics."
|
|
::= { statVoice 1}
|
|
|
|
voiceStatsEntry OBJECT-TYPE
|
|
SYNTAX VoiceStatsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A voice port statistics entry containing objects relating
|
|
to voice port statistics."
|
|
INDEX {voiceStatsRlpIndex, voiceStatsPortIndex }
|
|
|
|
::= { voiceStatsTable 1 }
|
|
|
|
VoiceStatsEntry ::=
|
|
SEQUENCE {
|
|
voiceStatsRlpIndex
|
|
INTEGER,
|
|
voiceStatsPortIndex
|
|
INTEGER,
|
|
voiceStatsRxCalls
|
|
Counter,
|
|
voiceStatsTxCalls
|
|
Counter,
|
|
voiceStatsRxCallsAccepts
|
|
Counter,
|
|
voiceStatsTxCallsAccepts
|
|
Counter,
|
|
voiceStatsRxClears
|
|
Counter,
|
|
voiceStatsTxClears
|
|
Counter,
|
|
voiceStatsBusyCalls
|
|
Counter,
|
|
voiceStatsCallTimeouts
|
|
Counter,
|
|
voiceStatsRxCongestions
|
|
Counter,
|
|
voiceStatsTxCongestions
|
|
Counter
|
|
}
|
|
|
|
voiceStatsRlpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The RLP Number."
|
|
::= { voiceStatsEntry 1 }
|
|
|
|
voiceStatsPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Port Number."
|
|
::= { voiceStatsEntry 2 }
|
|
|
|
voiceStatsRxCalls OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Number of Calls Received from the Network."
|
|
::= { voiceStatsEntry 3 }
|
|
|
|
voiceStatsTxCalls OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Number of Calls Transmitted to the Network."
|
|
::= { voiceStatsEntry 4 }
|
|
|
|
voiceStatsRxCallsAccepts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Number of Call Accepts Received from the Network."
|
|
::= { voiceStatsEntry 5 }
|
|
|
|
voiceStatsTxCallsAccepts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Number of Call Accepts Transmitted to the Network."
|
|
::= { voiceStatsEntry 6 }
|
|
|
|
voiceStatsRxClears OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Number of Call Receives cleared."
|
|
::= { voiceStatsEntry 7 }
|
|
|
|
voiceStatsTxClears OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Number of Call Transmitts cleared."
|
|
::= { voiceStatsEntry 8 }
|
|
|
|
voiceStatsBusyCalls OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Number of calls which received Busy indication."
|
|
::= { voiceStatsEntry 9 }
|
|
|
|
voiceStatsCallTimeouts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Number of calls which transmitted time-out to the network."
|
|
::= { voiceStatsEntry 10 }
|
|
|
|
voiceStatsRxCongestions OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of congestion management frames Received."
|
|
::= { voiceStatsEntry 11 }
|
|
|
|
voiceStatsTxCongestions OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of congestion management frames Transmitted."
|
|
::= { voiceStatsEntry 12 }
|
|
|
|
statThresh OBJECT IDENTIFIER ::= { statistics 2 }
|
|
|
|
--
|
|
-- The Statistic Threshold group for RLPs defines the RlpThresh Table
|
|
--
|
|
|
|
rlpThreshTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlpThreshEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to describe Statistic thresholds on each RLP"
|
|
::= { statThresh 1 }
|
|
|
|
rlpThreshEntry OBJECT-TYPE
|
|
SYNTAX RlpThreshEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "An RLP statistics threshold entry containing objects
|
|
relating to RLP statistics thresholds."
|
|
INDEX { rlpThreshRlpIndex }
|
|
::= { rlpThreshTable 1 }
|
|
|
|
RlpThreshEntry ::=
|
|
SEQUENCE {
|
|
rlpThreshRlpIndex
|
|
INTEGER,
|
|
rlpThreshPercntBufInUse
|
|
INTEGER,
|
|
rlpThreshMsgQueueLen
|
|
INTEGER,
|
|
rlpThreshRxFramesPerSec
|
|
INTEGER,
|
|
rlpThreshTxFramesPerSec
|
|
INTEGER,
|
|
rlpThreshRejFramesPerSec
|
|
INTEGER,
|
|
rlpThreshRtxFramesPerSec
|
|
INTEGER
|
|
}
|
|
rlpThreshRlpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The RLP Number."
|
|
::= { rlpThreshEntry 1 }
|
|
|
|
rlpThreshPercntBufInUse OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The threshold for Percent of Buffers in use on the RLP"
|
|
::= { rlpThreshEntry 2 }
|
|
|
|
rlpThreshMsgQueueLen OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The threshold for Percent of Buffers in use on the RLP"
|
|
::= { rlpThreshEntry 3 }
|
|
|
|
rlpThreshRxFramesPerSec OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The threshold for Rcvd frames per second on the RLP"
|
|
::= { rlpThreshEntry 4 }
|
|
|
|
rlpThreshTxFramesPerSec OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The threshold for Txmitted frames per second on the RLP"
|
|
::= { rlpThreshEntry 5 }
|
|
|
|
rlpThreshRejFramesPerSec OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The threshold for Rejected Frames per second on the RLP"
|
|
::= { rlpThreshEntry 6 }
|
|
|
|
rlpThreshRtxFramesPerSec OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The threshold for Retransmitted frames per second on the RLP"
|
|
::= { rlpThreshEntry 7 }
|
|
|
|
--
|
|
-- The Statistic Threshold group for Ports defines the PortThresh Table
|
|
--
|
|
|
|
portThreshTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF PortThreshEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A Table to describe Statistic thresholds on each port"
|
|
::= { statThresh 2 }
|
|
|
|
portThreshEntry OBJECT-TYPE
|
|
SYNTAX PortThreshEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION "A port statistics threshold entry containing objects
|
|
relating to port statistics thresholds."
|
|
INDEX { portThreshRlpIndex, portThreshIndex }
|
|
::= { portThreshTable 1 }
|
|
|
|
PortThreshEntry ::=
|
|
SEQUENCE {
|
|
portThreshRlpIndex
|
|
INTEGER,
|
|
portThreshIndex
|
|
INTEGER,
|
|
portThreshRxFramesPerSec
|
|
INTEGER,
|
|
portThreshTxFramesPerSec
|
|
INTEGER,
|
|
portThreshRtxFramesPerSec
|
|
INTEGER,
|
|
portThreshFCSErrPerSec
|
|
INTEGER,
|
|
portThreshLogRejPerSec
|
|
INTEGER,
|
|
portThreshTxErrorRatio
|
|
INTEGER,
|
|
portThreshRxErrorRatio
|
|
INTEGER,
|
|
portThreshTxPercentUtl
|
|
INTEGER,
|
|
portThreshRxPercentUtl
|
|
INTEGER
|
|
}
|
|
portThreshRlpIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The RLP Number."
|
|
::= { portThreshEntry 1 }
|
|
|
|
portThreshIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The Port Number."
|
|
::= { portThreshEntry 2 }
|
|
|
|
portThreshRxFramesPerSec OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The threshold for Rcvd frames per second on the port."
|
|
::= { portThreshEntry 3 }
|
|
|
|
portThreshTxFramesPerSec OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The threshold for Txmitted frames per second on the port."
|
|
::= { portThreshEntry 4 }
|
|
|
|
portThreshRtxFramesPerSec OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The threshold for Retransmitted frames per second on the port."
|
|
::= { portThreshEntry 5 }
|
|
|
|
portThreshFCSErrPerSec OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The threshold for FCS errors per second on the port."
|
|
::= { portThreshEntry 6 }
|
|
|
|
portThreshLogRejPerSec OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The threshold for Logical Rejects per second on the port."
|
|
::= { portThreshEntry 7 }
|
|
|
|
portThreshTxErrorRatio OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The threshold for Txmit error ratio on the port."
|
|
::= { portThreshEntry 8 }
|
|
|
|
portThreshRxErrorRatio OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The threshold for Rcv error ratio on the port."
|
|
::= { portThreshEntry 9 }
|
|
|
|
portThreshTxPercentUtl OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The threshold for Txmit percent utilization on the port."
|
|
::= { portThreshEntry 10 }
|
|
|
|
portThreshRxPercentUtl OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION "The threshold for Rcv percent utilization on the port."
|
|
::= { portThreshEntry 11 }
|
|
|
|
-- **********************
|
|
-- * THE BRIDGE GROUP *
|
|
-- **********************
|
|
|
|
bridge OBJECT IDENTIFIER ::= { local 9 }
|
|
|
|
bridgeAdminVirtualLANID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"LAN id inserted into token ring RIF field representing
|
|
internal virtual ring, for LLC2 or bridged traffic"
|
|
::= { bridge 1 }
|
|
|
|
bridgeOperVirtualLANID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"LAN id inserted into token ring RIF field representing
|
|
internal virtual ring, for LLC2 or bridged traffic"
|
|
::= { bridge 2 }
|
|
|
|
bridgeEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When yes the spanning tree algorithm is in effect and all
|
|
traffic types may be bridged. When no only llc/2 terminated
|
|
traffic is allowed on bridge interfaces."
|
|
DEFVAL { yes }
|
|
::= { bridge 3 }
|
|
|
|
bridgeMaxSizeForwardingTable OBJECT-TYPE
|
|
SYNTAX INTEGER (128..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of entries allowed in the bridge forwarding
|
|
table"
|
|
DEFVAL { 65535 }
|
|
::= { bridge 4 }
|
|
|
|
bridgeIPEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When yes, and BRIDGING ENABLED, IP traffic will be bridged,
|
|
otherwise IP traffic will be routed."
|
|
DEFVAL { no }
|
|
::= { bridge 5 }
|
|
|
|
bridgeIPXEnabled OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
no (1),
|
|
yes (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"When yes, and BRIDGING ENABLED, IPX traffic will be bridged,
|
|
otherwise IPX traffic will be routed."
|
|
DEFVAL { no }
|
|
::= { bridge 6 }
|
|
|
|
bridgeAdminSRBID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..15)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"bridge ID to be inserted into token ring RIF field,
|
|
this bridge"
|
|
DEFVAL { 0 }
|
|
::= { bridge 7 }
|
|
|
|
bridgeOperSRBID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..15)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"bridge ID to be inserted into token ring RIF field,
|
|
this bridge"
|
|
::= { bridge 8 }
|
|
|
|
bridgeDefaultEthernetFrameType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
type-II (1),
|
|
ieee8023 (2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"default frame type to be used when
|
|
forwarding traffic on ethernet interfaces."
|
|
DEFVAL { type-II }
|
|
::= { bridge 9 }
|
|
|
|
-- **************************
|
|
-- * THE NETLINK IP GROUP *
|
|
-- **************************
|
|
|
|
ipNl OBJECT IDENTIFIER ::= { local 11}
|
|
|
|
--
|
|
-- The Netlink IP Node Defaults Objects
|
|
--
|
|
|
|
nlIpDefaultRIPVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ripVersion1(1),
|
|
rip1Compatible(2),
|
|
ripVersion2(3)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The version of RIP that will be used by IP."
|
|
DEFVAL { ripVersion1 }
|
|
::= { ipNl 1 }
|
|
|
|
-- *****************************
|
|
-- * THE NETLINK VOICE GROUP *
|
|
-- *****************************
|
|
|
|
voice OBJECT IDENTIFIER ::= { local 12 }
|
|
|
|
--
|
|
-- The Netlink Voice System Level Objects
|
|
--
|
|
|
|
voiceSystemVoiceNodeNum OBJECT-TYPE
|
|
SYNTAX INTEGER (1..9999)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The number that identifies this node."
|
|
DEFVAL { 1 }
|
|
::= { voice 1 }
|
|
|
|
voiceSystemRingVolFreq OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
v75-hz-16-66 (1),
|
|
v80-hz-20-00 (2),
|
|
v75-hz-25-00 (3),
|
|
v60-hz-50-00 (4),
|
|
v75-hz-50-00 (5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The frequency and voltage of the telephone ring circuit.
|
|
In two wire OPX mode, the node provides ring voltage to
|
|
the telephone when it is called by a remote unit."
|
|
DEFVAL { v80-hz-20-00 }
|
|
::= { voice 2 }
|
|
|
|
voiceSystemCountryCode OBJECT-TYPE
|
|
SYNTAX INTEGER (1..999)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The telephone dialing prefix code that identifies
|
|
the country in which the node is installed."
|
|
DEFVAL { 1 }
|
|
::= { voice 3 }
|
|
|
|
voiceSystemDialDigits OBJECT-TYPE
|
|
SYNTAX INTEGER (2..4)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of digits that will be used in the speed
|
|
dialing scheme, as well as the number of digits one
|
|
can specify for the Auto Dial feature. This requires
|
|
rebooting for the change to take effect."
|
|
DEFVAL { 3 }
|
|
::= { voice 4 }
|
|
|
|
voiceSystemVoiceRatesMin OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bps-4800 (1),
|
|
bps-8000 (2),
|
|
bps-32000 (3),
|
|
bps-64000 (4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The minimum operating rate of all voice channels when
|
|
congestion occurs."
|
|
DEFVAL { bps-4800 }
|
|
::= { voice 5 }
|
|
|
|
voiceSystemVoiceRatesMax OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bps-4800 (1),
|
|
bps-8000 (2),
|
|
bps-32000 (3),
|
|
bps-64000 (4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The maximum operating digitization rate of all voice
|
|
channels when there is no congestion."
|
|
DEFVAL { bps-64000 }
|
|
::= { voice 6 }
|
|
|
|
voiceSystemExtDialDigits OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION "The number of extended dial digits that can be defined
|
|
in the speed map table and/or entered by the user of
|
|
attached equipment as part of a dial string. This requires
|
|
rebooting for the change to take effect."
|
|
DEFVAL { 0 }
|
|
::= { voice 7 }
|
|
|
|
--
|
|
-- The Netlink Voice Speed Dial Map table
|
|
--
|
|
|
|
voiceSpeedDialTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF VoiceSpeedDialEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of speed-dial numbers."
|
|
::= { voice 8 }
|
|
|
|
voiceSpeedDialEntry OBJECT-TYPE
|
|
SYNTAX VoiceSpeedDialEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A Voice Speed Dial entry containing objects relating to
|
|
the speed-dial number that are configurable by the user."
|
|
INDEX { voiceSpeedDialDigits }
|
|
::= { voiceSpeedDialTable 1 }
|
|
|
|
VoiceSpeedDialEntry ::=
|
|
SEQUENCE {
|
|
voiceSpeedDialDigits
|
|
OCTET STRING,
|
|
voiceSpeedDialLongDialMap
|
|
OCTET STRING,
|
|
voiceSpeedDialExtDialStr
|
|
OCTET STRING,
|
|
voiceSpeedDialRowStatus
|
|
RowStatus
|
|
}
|
|
|
|
voiceSpeedDialDigits OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..4))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The speed-dial number. A question mark wildcard can be used
|
|
for any digit, and an asterisk wildcard can be used for any
|
|
number of digits."
|
|
::= { voiceSpeedDialEntry 1 }
|
|
|
|
voiceSpeedDialLongDialMap OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(6))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number for which the speed-dial number is a shortcut."
|
|
::= { voiceSpeedDialEntry 2 }
|
|
|
|
voiceSpeedDialExtDialStr OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE(1..16))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The extended set of digits that will be forwarded with the
|
|
call if portVoiceOperExtDigitsSource in the physical port
|
|
record is set to Map."
|
|
::= { voiceSpeedDialEntry 3 }
|
|
|
|
voiceSpeedDialRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is used to manage the creation and deletion
|
|
of conceptual rows in the voiceSpeedDialTable and follows the
|
|
SNMPv2 RowStatus conventions by supporting the following values:
|
|
|
|
- `active', which indicates that the conceptual row is
|
|
available for use by the managed device. For a management
|
|
protocol set operation, a genErr response is returned when
|
|
the row does not exist.
|
|
|
|
- `createAndGo', which is supplied by a management
|
|
station wishing to create a new instance of a
|
|
conceptual row and to have its status automatically set
|
|
to active, making it available for use by the managed
|
|
device. For a management protocol set operation, a
|
|
genErr response is returned when the row already exists.
|
|
|
|
- `destroy', which is supplied by a management station
|
|
wishing to delete all of the instances associated with
|
|
an existing conceptual row.
|
|
|
|
Note that all of the above values may be specified in a
|
|
management protocol set operation, and only the 'active'
|
|
value will be returned in response to a management protocol
|
|
retrieval operation. For a management protocol set operation,
|
|
if other variable bindings are included in the same PDU, then
|
|
a genErr response is returned."
|
|
::= { voiceSpeedDialEntry 4 }
|
|
|
|
END
|