mirror of
https://github.com/librenms/librenms.git
synced 2024-10-07 16:52:45 +00:00
1767 lines
47 KiB
Plaintext
1767 lines
47 KiB
Plaintext
CISCOSB-rlFft DEFINITIONS ::= BEGIN
|
|
|
|
-- Title: CISCOSB FFT Private Extension
|
|
-- Version: 7.37.00.00
|
|
-- Date: 17 May 2004
|
|
|
|
IMPORTS
|
|
switch001 FROM CISCOSB-MIB
|
|
Unsigned32, IpAddress,
|
|
MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI
|
|
RowStatus, TruthValue, PhysAddress, DisplayString,
|
|
TEXTUAL-CONVENTION FROM SNMPv2-TC;
|
|
|
|
|
|
Percents ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies percents."
|
|
SYNTAX INTEGER (0..100)
|
|
|
|
NetNumber ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies the network identification."
|
|
SYNTAX OCTET STRING (SIZE(4))
|
|
|
|
|
|
---
|
|
--- rlIpFFT
|
|
---
|
|
|
|
rlFFT MODULE-IDENTITY
|
|
LAST-UPDATED "200406010000Z"
|
|
ORGANIZATION "Cisco Small Business"
|
|
|
|
CONTACT-INFO
|
|
"Postal: 170 West Tasman Drive
|
|
San Jose , CA 95134-1706
|
|
USA
|
|
|
|
Website: Cisco Small Business Home http://www.cisco.com/smb>;,
|
|
Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
|
|
|
|
DESCRIPTION
|
|
"The private MIB module definition for switch001 Fast Forwarding Tables."
|
|
REVISION "200406010000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB."
|
|
::= { switch001 47 }
|
|
|
|
|
|
|
|
rlIpFFT OBJECT IDENTIFIER ::= { rlFFT 1 }
|
|
|
|
rlIpFftMibVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MIB's version, the current version is 1."
|
|
::= { rlIpFFT 1 }
|
|
|
|
rlIpMaxFftNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of IP FFTs."
|
|
::= { rlIpFFT 2 }
|
|
|
|
rlIpFftDynamicSupported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported (1),
|
|
unsupported (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether dynamic IP FFTs are supported."
|
|
::= { rlIpFFT 3 }
|
|
|
|
rlIpFftSubnetSupported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported (1),
|
|
unsupported (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether subtable per IP subnet is supported."
|
|
::= { rlIpFFT 4 }
|
|
|
|
rlIpFftUnknownAddrMsgUsed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
used (1),
|
|
unused (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether the 3SW uses the unknown address message."
|
|
::= { rlIpFFT 5 }
|
|
|
|
rlIpFftAgingTimeSupported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported (1),
|
|
unsupported (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether aging time is supported."
|
|
::= { rlIpFFT 6 }
|
|
|
|
rlIpFftSrcAddrSupported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported (1),
|
|
unsupported (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether an IP subtable per station contains source IP address."
|
|
::= { rlIpFFT 7 }
|
|
|
|
rlIpFftAgingTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The aging timeout in seconds."
|
|
::= { rlIpFFT 8 }
|
|
|
|
rlIpFftRedBoundary OBJECT-TYPE
|
|
SYNTAX Percents
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The red boundary in percents."
|
|
::= { rlIpFFT 9 }
|
|
|
|
rlIpFftYellowBoundary OBJECT-TYPE
|
|
SYNTAX Percents
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The yellow boundary in percents."
|
|
::= { rlIpFFT 10 }
|
|
|
|
--rlIpFftPollingInterval OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The polling interval for dynamic IP FFTs support in seconds."
|
|
-- ::= { rlIpFFT 11 }
|
|
|
|
--
|
|
-- The IP FFT Number Routers Table
|
|
--
|
|
|
|
rlIpFftNumTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpFftNumEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing routes' numbers of
|
|
the IP SFFTs and IP NFFTs. "
|
|
::= { rlIpFFT 12 }
|
|
|
|
rlIpFftNumEntry OBJECT-TYPE
|
|
SYNTAX RlIpFftNumEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the containing routes' numbers
|
|
of IP SFFT and IP NFFT "
|
|
INDEX { rlIpFftNumIndex }
|
|
::= { rlIpFftNumTable 1 }
|
|
|
|
RlIpFftNumEntry ::= SEQUENCE {
|
|
rlIpFftNumIndex INTEGER,
|
|
rlIpFftNumStnRoutesNumber INTEGER,
|
|
rlIpFftNumSubRoutesNumber INTEGER
|
|
}
|
|
|
|
rlIpFftNumIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the index of the IP FFT. "
|
|
::= { rlIpFftNumEntry 1 }
|
|
|
|
rlIpFftNumStnRoutesNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of routes that are contained in the IP SFFT. "
|
|
::= { rlIpFftNumEntry 2 }
|
|
|
|
rlIpFftNumSubRoutesNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of routes that are contained in the IP NFFT. "
|
|
::= { rlIpFftNumEntry 3 }
|
|
|
|
--
|
|
-- The IP Fast Forwarding Table per station
|
|
--
|
|
|
|
rlIpFftStnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpFftStnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table contains IP Fast Forwarding information
|
|
per station for IP datagrams. "
|
|
::= { rlIpFFT 13 }
|
|
|
|
rlIpFftStnEntry OBJECT-TYPE
|
|
SYNTAX RlIpFftStnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) contains the IP fast forwarding
|
|
information for IP datagrams from a particular source and
|
|
destination addresses."
|
|
INDEX { rlIpFftStnIndex, rlIpFftStnMrid, rlIpFftStnDstIpAddress }
|
|
::= { rlIpFftStnTable 1 }
|
|
|
|
RlIpFftStnEntry ::= SEQUENCE {
|
|
rlIpFftStnIndex INTEGER,
|
|
rlIpFftStnMrid INTEGER,
|
|
rlIpFftStnDstIpAddress IpAddress,
|
|
rlIpFftStnDstRouteIpMask IpAddress,
|
|
rlIpFftStnDstIpAddrType INTEGER,
|
|
rlIpFftStnDstMacAddress PhysAddress,
|
|
rlIpFftStnSrcMacAddress PhysAddress,
|
|
rlIpFftStnOutIfIndex INTEGER,
|
|
rlIpFftStnVid INTEGER,
|
|
rlIpFftStnTaggedMode INTEGER,
|
|
rlIpFftStnAge INTEGER
|
|
}
|
|
|
|
rlIpFftStnIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the index of the IP FFT. "
|
|
::= { rlIpFftStnEntry 1 }
|
|
|
|
rlIpFftStnMrid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router's Instance Identifier in the SFFT. "
|
|
::= { rlIpFftStnEntry 2 }
|
|
|
|
rlIpFftStnDstIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP destination address for which this entry
|
|
contains IP forwarding information."
|
|
::= { rlIpFftStnEntry 3 }
|
|
|
|
rlIpFftStnDstRouteIpMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP destination mask for which this entry
|
|
contains IP forwarding information."
|
|
::= { rlIpFftStnEntry 4 }
|
|
|
|
rlIpFftStnDstIpAddrType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local (1),
|
|
remote (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP destination address type. "
|
|
::= { rlIpFftStnEntry 5 }
|
|
|
|
rlIpFftStnDstMacAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC destination address."
|
|
::= { rlIpFftStnEntry 6}
|
|
|
|
rlIpFftStnSrcMacAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC source address."
|
|
::= { rlIpFftStnEntry 7 }
|
|
|
|
rlIpFftStnOutIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex of output physical port."
|
|
::= { rlIpFftStnEntry 8 }
|
|
|
|
rlIpFftStnVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vid of the output port."
|
|
::= { rlIpFftStnEntry 9 }
|
|
|
|
rlIpFftStnTaggedMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
untagged (1),
|
|
tagged (2),
|
|
basedPortConfig (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tagged value of the port. When the Tagged field is not
|
|
a part of the FFT table in the ASIC,
|
|
the Tagged field gets the BasedPortConfig value "
|
|
::= { rlIpFftStnEntry 10 }
|
|
|
|
rlIpFftStnAge OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The age of the entry in seconds from the inserting."
|
|
::= { rlIpFftStnEntry 11 }
|
|
|
|
--
|
|
-- The IP Fast Forwarding Table per subnet
|
|
--
|
|
|
|
rlIpFftSubTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpFftSubEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing IP Fast Forwarding information
|
|
per subnet for IP datagrams. "
|
|
::= { rlIpFFT 14 }
|
|
|
|
rlIpFftSubEntry OBJECT-TYPE
|
|
SYNTAX RlIpFftSubEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the IP fast forwarding
|
|
information for IP datagrams from a particular source and
|
|
destination addresses."
|
|
INDEX { rlIpFftSubMrid , rlIpFftSubDstIpSubnet, rlIpFftSubDstIpMask }
|
|
|
|
::= { rlIpFftSubTable 1 }
|
|
|
|
RlIpFftSubEntry ::= SEQUENCE {
|
|
rlIpFftSubMrid INTEGER,
|
|
rlIpFftSubDstIpSubnet IpAddress,
|
|
rlIpFftSubDstIpMask IpAddress,
|
|
rlIpFftSubNextHopSetRefCount INTEGER,
|
|
rlIpFftSubNextHopCount INTEGER,
|
|
rlIpFftSubNextHopIfindex1 INTEGER,
|
|
rlIpFftSubNextHopIpAddr1 IpAddress,
|
|
rlIpFftSubNextHopIfindex2 INTEGER,
|
|
rlIpFftSubNextHopIpAddr2 IpAddress,
|
|
rlIpFftSubNextHopIfindex3 INTEGER,
|
|
rlIpFftSubNextHopIpAddr3 IpAddress,
|
|
rlIpFftSubNextHopIfindex4 INTEGER,
|
|
rlIpFftSubNextHopIpAddr4 IpAddress,
|
|
rlIpFftSubNextHopIfindex5 INTEGER,
|
|
rlIpFftSubNextHopIpAddr5 IpAddress,
|
|
rlIpFftSubNextHopIfindex6 INTEGER,
|
|
rlIpFftSubNextHopIpAddr6 IpAddress,
|
|
rlIpFftSubNextHopIfindex7 INTEGER,
|
|
rlIpFftSubNextHopIpAddr7 IpAddress,
|
|
rlIpFftSubNextHopIfindex8 INTEGER,
|
|
rlIpFftSubNextHopIpAddr8 IpAddress,
|
|
rlIpFftSubAge INTEGER
|
|
}
|
|
|
|
rlIpFftSubMrid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The router's Instance Identifier in the NFFT. "
|
|
::= { rlIpFftSubEntry 1 }
|
|
|
|
rlIpFftSubDstIpSubnet OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP destination subnet for which this entry
|
|
contains IP forwarding information."
|
|
::= { rlIpFftSubEntry 2 }
|
|
|
|
rlIpFftSubDstIpMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP destination mask for which this entry
|
|
contains IP forwarding information."
|
|
::= { rlIpFftSubEntry 3 }
|
|
|
|
rlIpFftSubAge OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The age of the entry in seconds from the inserting."
|
|
|
|
::= { rlIpFftSubEntry 4 }
|
|
|
|
rlIpFftSubNextHopSetRefCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of NFFT entries that used the given NextHop set (ECMP path). "
|
|
|
|
::= { rlIpFftSubEntry 5 }
|
|
|
|
rlIpFftSubNextHopCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of used NextHops in the given NextHop set (ECMP path) for the NFFT entry. "
|
|
::= { rlIpFftSubEntry 6 }
|
|
|
|
rlIpFftSubNextHopIfindex1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
|
|
::= { rlIpFftSubEntry 7 }
|
|
|
|
rlIpFftSubNextHopIpAddr1 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The first NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
|
|
::= { rlIpFftSubEntry 8 }
|
|
|
|
rlIpFftSubNextHopIfindex2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
|
|
::= { rlIpFftSubEntry 9 }
|
|
|
|
rlIpFftSubNextHopIpAddr2 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The second NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
|
|
::= { rlIpFftSubEntry 10 }
|
|
|
|
rlIpFftSubNextHopIfindex3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The third NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
|
|
::= { rlIpFftSubEntry 11 }
|
|
|
|
rlIpFftSubNextHopIpAddr3 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The third NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
|
|
::= { rlIpFftSubEntry 12 }
|
|
|
|
rlIpFftSubNextHopIfindex4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fourth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
|
|
::= { rlIpFftSubEntry 13 }
|
|
|
|
rlIpFftSubNextHopIpAddr4 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fourth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
|
|
::= { rlIpFftSubEntry 14 }
|
|
|
|
rlIpFftSubNextHopIfindex5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fifth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
|
|
::= { rlIpFftSubEntry 15 }
|
|
|
|
rlIpFftSubNextHopIpAddr5 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fifth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
|
|
::= { rlIpFftSubEntry 16 }
|
|
|
|
rlIpFftSubNextHopIfindex6 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The six NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
|
|
::= { rlIpFftSubEntry 17 }
|
|
|
|
rlIpFftSubNextHopIpAddr6 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The six NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
|
|
::= { rlIpFftSubEntry 18 }
|
|
|
|
rlIpFftSubNextHopIfindex7 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The seven NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
|
|
::= { rlIpFftSubEntry 19 }
|
|
|
|
rlIpFftSubNextHopIpAddr7 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The seven NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
|
|
::= { rlIpFftSubEntry 20 }
|
|
|
|
rlIpFftSubNextHopIfindex8 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The eight NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry. "
|
|
::= { rlIpFftSubEntry 21 }
|
|
|
|
rlIpFftSubNextHopIpAddr8 OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The eight NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry. "
|
|
::= { rlIpFftSubEntry 22 }
|
|
|
|
|
|
--
|
|
-- The IP FFT Counters Table
|
|
--
|
|
|
|
rlIpFftCountersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpFftCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing IP Counters information
|
|
per one IP FFT."
|
|
::= { rlIpFFT 15 }
|
|
|
|
rlIpFftCountersEntry OBJECT-TYPE
|
|
SYNTAX RlIpFftCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the IP Counters
|
|
information containing amount of IP datagrams passed
|
|
by certain IP FFT."
|
|
INDEX { rlIpFftCountersIndex }
|
|
::= { rlIpFftCountersTable 1 }
|
|
|
|
RlIpFftCountersEntry ::= SEQUENCE {
|
|
rlIpFftCountersIndex INTEGER,
|
|
rlIpFftInReceives INTEGER,
|
|
rlIpFftForwDatagrams INTEGER,
|
|
rlIpFftInDiscards INTEGER
|
|
}
|
|
|
|
rlIpFftCountersIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the index of the IP FFT."
|
|
::= { rlIpFftCountersEntry 1 }
|
|
|
|
rlIpFftInReceives OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of received IP datagrams "
|
|
::= { rlIpFftCountersEntry 2 }
|
|
|
|
rlIpFftForwDatagrams OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of forwarded IP datagrams "
|
|
::= { rlIpFftCountersEntry 3 }
|
|
|
|
rlIpFftInDiscards OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of discarded IP datagrams "
|
|
::= { rlIpFftCountersEntry 4 }
|
|
|
|
--
|
|
-- The IP NextHop Table (used by NFFT and Remote SFFT)
|
|
--
|
|
|
|
rlIpFftNextHopTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpFftNextHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table contains NextHop information
|
|
used for routing IP datagrams. "
|
|
::= { rlIpFFT 16 }
|
|
|
|
rlIpFftNextHopEntry OBJECT-TYPE
|
|
SYNTAX RlIpFftNextHopEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) contains the NextHop info
|
|
information for routing IP datagrams."
|
|
|
|
INDEX { rlIpFftNextHopifindex, rlIpFftNextHopIpAddress }
|
|
::= { rlIpFftNextHopTable 1 }
|
|
|
|
RlIpFftNextHopEntry ::= SEQUENCE {
|
|
rlIpFftNextHopifindex INTEGER,
|
|
rlIpFftNextHopIpAddress IpAddress,
|
|
rlIpFftNextHopValid INTEGER,
|
|
rlIpFftNextHopType INTEGER,
|
|
rlIpFftNextHopReferenceCount INTEGER,
|
|
rlIpFftNextHopNetAddress PhysAddress,
|
|
rlIpFftNextHopVid INTEGER,
|
|
rlIpFftNextHopMacAddress PhysAddress,
|
|
rlIpFftNextHopOutIfIndex INTEGER
|
|
}
|
|
|
|
rlIpFftNextHopifindex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the IP Interface index of the NextHop. "
|
|
::= { rlIpFftNextHopEntry 1 }
|
|
|
|
rlIpFftNextHopIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address of a NextHop for which an entry contains
|
|
IP forwarding information. "
|
|
::= { rlIpFftNextHopEntry 2 }
|
|
|
|
rlIpFftNextHopValid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid (1),
|
|
invalid (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NextHop Valid bit. When L2 info is missing,
|
|
a NextHop has Invalid value. "
|
|
::= { rlIpFftNextHopEntry 3 }
|
|
|
|
rlIpFftNextHopType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local (1),
|
|
remote (2),
|
|
reject (3),
|
|
drop (4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NextHop type. "
|
|
::= { rlIpFftNextHopEntry 4 }
|
|
|
|
rlIpFftNextHopReferenceCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IF LPM is supported:
|
|
If ecmp supported:
|
|
the field NextHop_ref_count used to save number
|
|
of NextHop SETs that use the NextHop.
|
|
Otherwise, NextHop_ref_count used to save number of
|
|
NFFT entries that use the NextHop.
|
|
IF LPM is NOT supported:
|
|
NextHop_ref_count used to save number of
|
|
Remote SFFT entries that use the NextHop. "
|
|
::= { rlIpFftNextHopEntry 5 }
|
|
|
|
rlIpFftNextHopNetAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The NextHop Physical Address."
|
|
::= { rlIpFftNextHopEntry 6 }
|
|
|
|
rlIpFftNextHopVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vid of the output port."
|
|
::= { rlIpFftNextHopEntry 7 }
|
|
|
|
rlIpFftNextHopMacAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC destination address."
|
|
::= { rlIpFftNextHopEntry 8}
|
|
|
|
rlIpFftNextHopOutIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex of output physical port."
|
|
::= { rlIpFftNextHopEntry 9 }
|
|
|
|
--
|
|
-- The L2 info Table (used by NextHop and Direct SFFT)
|
|
--
|
|
|
|
rlIpFftL2InfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpFftL2InfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table contains L2 information
|
|
used for routing IP datagrams. "
|
|
::= { rlIpFFT 17 }
|
|
|
|
rlIpFftL2InfoEntry OBJECT-TYPE
|
|
SYNTAX RlIpFftL2InfoEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) contains the L2 info
|
|
information for routing IP datagrams."
|
|
|
|
INDEX { rlIpFftL2InfoIfindex, rlIpFftL2InfoDstMacAddress }
|
|
::= { rlIpFftL2InfoTable 1 }
|
|
|
|
RlIpFftL2InfoEntry ::= SEQUENCE {
|
|
rlIpFftL2InfoIfindex INTEGER,
|
|
rlIpFftL2InfoDstMacAddress PhysAddress,
|
|
rlIpFftL2InfoValid INTEGER,
|
|
rlIpFftL2InfoType INTEGER,
|
|
rlIpFftL2InfoReferenceCount INTEGER,
|
|
rlIpFftL2InfoVid INTEGER,
|
|
rlIpFftL2InfoSrcMacAddress PhysAddress,
|
|
rlIpFftL2InfoOutIfIndex INTEGER,
|
|
rlIpFftL2InfoTaggedMode INTEGER
|
|
}
|
|
|
|
rlIpFftL2InfoIfindex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VLAN Ifindex of the destination port. "
|
|
::= { rlIpFftL2InfoEntry 1 }
|
|
|
|
rlIpFftL2InfoDstMacAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC destination address."
|
|
::= { rlIpFftL2InfoEntry 2}
|
|
|
|
rlIpFftL2InfoValid OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid (1),
|
|
invalid (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The L2 info entry valid bit. When L2 info is missing some information,
|
|
an L2 info has Invalid value. "
|
|
::= { rlIpFftL2InfoEntry 3 }
|
|
|
|
rlIpFftL2InfoType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other (1),
|
|
vlan (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The L2 info type. With Enthernet media l2 info type is vlan.
|
|
WIth Tunneling feature, l2 info type will be expanded. "
|
|
::= { rlIpFftL2InfoEntry 4 }
|
|
|
|
rlIpFftL2InfoReferenceCount OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reference count contains a number of
|
|
NextHop entries that use this L2 info."
|
|
::= { rlIpFftL2InfoEntry 5 }
|
|
|
|
rlIpFftL2InfoVid OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The vid of the destination port. "
|
|
::= { rlIpFftL2InfoEntry 6 }
|
|
|
|
rlIpFftL2InfoSrcMacAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC source address placed to Ehernet Header of IP forwarded packet."
|
|
::= { rlIpFftL2InfoEntry 7}
|
|
|
|
rlIpFftL2InfoOutIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex of output physical port the packet is forwarded through."
|
|
::= { rlIpFftL2InfoEntry 8 }
|
|
|
|
rlIpFftL2InfoTaggedMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
untagged (1),
|
|
tagged (2),
|
|
basedPortConfig (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tagged value of the port. When the Tagged field is not
|
|
a part of the FFT table in the ASIC,
|
|
the Tagged field get the BasedPortConfig value."
|
|
::= { rlIpFftL2InfoEntry 9 }
|
|
|
|
---
|
|
--- rlIpxFFT
|
|
---
|
|
|
|
rlIpxFFT OBJECT IDENTIFIER ::= { rlFFT 2 }
|
|
|
|
rlIpxFftMibVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MIB's version, the current version is 1."
|
|
::= { rlIpxFFT 1 }
|
|
|
|
rlIpxMaxFftNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximun number of IPX FFTs. An IPX FFT gets a number
|
|
from 1 until rlIpxMaxFftSetNumber."
|
|
::= { rlIpxFFT 2 }
|
|
|
|
rlIpxFftDynamicSupported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported (1),
|
|
unsupported (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether dynamic IPX FFTs are supported."
|
|
::= { rlIpxFFT 3 }
|
|
|
|
rlIpxFftNetworkSupported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported (1),
|
|
unsupported (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether subtable per IPX network is supported."
|
|
::= { rlIpxFFT 4 }
|
|
|
|
rlIpxFftUnknownAddrMsgUsed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
used (1),
|
|
unused (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether the 3SW uses the unknown address message."
|
|
::= { rlIpxFFT 5 }
|
|
|
|
rlIpxFftAgingTimeSupported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported (1),
|
|
unsupported (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether aging time is supported for subtable per station."
|
|
::= { rlIpxFFT 6 }
|
|
|
|
rlIpxFftSrcAddrSupported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported (1),
|
|
unsupported (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether an IPX subtable per station contains source
|
|
IPX address."
|
|
::= { rlIpxFFT 7 }
|
|
|
|
rlIpxFftAgingTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The aging timeout in seconds."
|
|
::= { rlIpxFFT 8 }
|
|
|
|
rlIpxFftRedBoundary OBJECT-TYPE
|
|
SYNTAX INTEGER (1..100)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The red boundary in percents."
|
|
::= { rlIpxFFT 9 }
|
|
|
|
rlIpxFftYellowBoundary OBJECT-TYPE
|
|
SYNTAX Percents
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The yellow boundary in percents."
|
|
::= { rlIpxFFT 10 }
|
|
|
|
--rlIpxFftPollingInterval OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The polling interval for dynamic IPX FFTs support in seconds."
|
|
-- ::= { rlIpxFFT 11 }
|
|
|
|
--
|
|
-- The IPX FFT Number Routers Table
|
|
--
|
|
|
|
rlIpxFftNumTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpxFftNumEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing number routes of
|
|
the IPX Fast Forwarding Table. "
|
|
::= { rlIpxFFT 12 }
|
|
|
|
rlIpxFftNumEntry OBJECT-TYPE
|
|
SYNTAX RlIpxFftNumEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the containing number routes of
|
|
of IPX SFFT and IPX NFFT "
|
|
INDEX { rlIpxFftNumIndex }
|
|
::= { rlIpxFftNumTable 1 }
|
|
|
|
RlIpxFftNumEntry ::= SEQUENCE {
|
|
rlIpxFftNumIndex INTEGER,
|
|
rlIpxFftNumStnRoutesNumber INTEGER,
|
|
rlIpxFftNumSubRoutesNumber INTEGER
|
|
}
|
|
|
|
rlIpxFftNumIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the index of the IPX FFT. "
|
|
::= { rlIpxFftNumEntry 1 }
|
|
|
|
rlIpxFftNumStnRoutesNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of routes containing in the IPX SFFT. "
|
|
::= { rlIpxFftNumEntry 2 }
|
|
|
|
rlIpxFftNumSubRoutesNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of routes containing in the IPX NFFT. "
|
|
::= { rlIpxFftNumEntry 3 }
|
|
|
|
--
|
|
-- The IPX Fast Forwarding Table per station
|
|
--
|
|
|
|
rlIpxFftStnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpxFftStnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing IPX Fast Forwarding information
|
|
per station for IPX. "
|
|
::= { rlIpxFFT 13 }
|
|
|
|
rlIpxFftStnEntry OBJECT-TYPE
|
|
SYNTAX RlIpxFftStnEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the IP fast forwarding
|
|
information for IP datagrams from a particular source and
|
|
destination addresses."
|
|
INDEX { rlIpxFftStnIndex, rlIpxFftStnDstNetid, rlIpxFftStnDstNode,
|
|
rlIpxFftStnSrcNetid, rlIpxFftStnSrcNode }
|
|
::= { rlIpxFftStnTable 1 }
|
|
|
|
RlIpxFftStnEntry ::= SEQUENCE {
|
|
rlIpxFftStnIndex INTEGER,
|
|
rlIpxFftStnDstNetid NetNumber,
|
|
rlIpxFftStnDstNode PhysAddress,
|
|
rlIpxFftStnSrcNetid NetNumber,
|
|
rlIpxFftStnSrcNode PhysAddress,
|
|
rlIpxFftStnDstIpxAddrType INTEGER,
|
|
rlIpxFftStnEncapsulation INTEGER,
|
|
rlIpxFftStnDstMacAddress PhysAddress,
|
|
rlIpxFftStnSrcMacAddress PhysAddress,
|
|
rlIpxFftStnOutIfIndex INTEGER,
|
|
rlIpxFftStnTci INTEGER,
|
|
rlIpxFftStnFacsIndex INTEGER,
|
|
rlIpxFftStnAge INTEGER
|
|
}
|
|
|
|
rlIpxFftStnIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the index of the IPX FFT. "
|
|
::= { rlIpxFftStnEntry 1 }
|
|
|
|
rlIpxFftStnDstNetid OBJECT-TYPE
|
|
SYNTAX NetNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination network for which this entry
|
|
contains IPX forwarding information."
|
|
::= { rlIpxFftStnEntry 2 }
|
|
|
|
rlIpxFftStnDstNode OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination node for which this entry
|
|
contains IPX forwarding information."
|
|
::= { rlIpxFftStnEntry 3 }
|
|
|
|
rlIpxFftStnSrcNetid OBJECT-TYPE
|
|
SYNTAX NetNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The source network for which this entry
|
|
contains IPX forwarding information."
|
|
::= { rlIpxFftStnEntry 4 }
|
|
|
|
rlIpxFftStnSrcNode OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination node for which this entry
|
|
contains IPX forwarding information."
|
|
::= { rlIpxFftStnEntry 5 }
|
|
|
|
rlIpxFftStnDstIpxAddrType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
local (1),
|
|
remote (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination address type. "
|
|
::= { rlIpxFftStnEntry 6 }
|
|
|
|
rlIpxFftStnEncapsulation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
novell(1),
|
|
ethernet(2),
|
|
llc(3),
|
|
snap(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The encapsulation method associated with this route."
|
|
::= { rlIpxFftStnEntry 7 }
|
|
|
|
rlIpxFftStnDstMacAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC destination address."
|
|
::= { rlIpxFftStnEntry 8 }
|
|
|
|
rlIpxFftStnSrcMacAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC source address."
|
|
::= { rlIpxFftStnEntry 9 }
|
|
|
|
rlIpxFftStnOutIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex of output physical port."
|
|
::= { rlIpxFftStnEntry 10 }
|
|
|
|
rlIpxFftStnTci OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of TCI or 0."
|
|
::= { rlIpxFftStnEntry 11 }
|
|
|
|
rlIpxFftStnFacsIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of index of the FACS Table."
|
|
::= { rlIpxFftStnEntry 12 }
|
|
|
|
rlIpxFftStnAge OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The age of the entry in seconds."
|
|
::= { rlIpxFftStnEntry 13 }
|
|
|
|
--
|
|
-- The IPX Fast Forwarding Table per network
|
|
--
|
|
|
|
rlIpxFftSubTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpxFftSubEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing IPX Fast Forwarding information
|
|
per network for IPX . "
|
|
::= { rlIpxFFT 14 }
|
|
|
|
rlIpxFftSubEntry OBJECT-TYPE
|
|
SYNTAX RlIpxFftSubEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the IP fast forwarding
|
|
information for IP datagrams from a particular source and
|
|
destination addresses."
|
|
INDEX { rlIpxFftSubIndex, rlIpxFftSubDstNetid }
|
|
::= { rlIpxFftSubTable 1 }
|
|
|
|
RlIpxFftSubEntry ::= SEQUENCE {
|
|
rlIpxFftSubIndex INTEGER,
|
|
rlIpxFftSubDstNetid NetNumber,
|
|
rlIpxFftSubEncapsulation INTEGER,
|
|
rlIpxFftSubDstMacAddress PhysAddress,
|
|
rlIpxFftSubSrcMacAddress PhysAddress,
|
|
rlIpxFftSubOutIfIndex INTEGER,
|
|
rlIpxFftSubTci INTEGER,
|
|
rlIpxFftSubFacsIndex INTEGER,
|
|
rlIpxFftSubAge INTEGER
|
|
}
|
|
|
|
rlIpxFftSubIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the index of the IPX FFT. "
|
|
::= { rlIpxFftSubEntry 1 }
|
|
|
|
rlIpxFftSubDstNetid OBJECT-TYPE
|
|
SYNTAX NetNumber
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination network for which this entry
|
|
contains IPX forwarding information."
|
|
::= { rlIpxFftSubEntry 2 }
|
|
|
|
rlIpxFftSubEncapsulation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
novell(1),
|
|
ethernet(2),
|
|
llc(3),
|
|
snap(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The encapsulation method associated with this route."
|
|
::= { rlIpxFftSubEntry 3 }
|
|
|
|
rlIpxFftSubDstMacAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC destination address."
|
|
::= { rlIpxFftSubEntry 4 }
|
|
|
|
rlIpxFftSubSrcMacAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC source address."
|
|
::= { rlIpxFftSubEntry 5 }
|
|
|
|
rlIpxFftSubOutIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of ifIndex of output physical port."
|
|
::= { rlIpxFftSubEntry 6 }
|
|
|
|
rlIpxFftSubTci OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of TCI or 0."
|
|
::= { rlIpxFftSubEntry 7 }
|
|
|
|
rlIpxFftSubFacsIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of index of the FACS Table."
|
|
::= { rlIpxFftSubEntry 8 }
|
|
|
|
rlIpxFftSubAge OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The age of the entry in seconds."
|
|
::= { rlIpxFftSubEntry 9 }
|
|
|
|
--
|
|
-- The IPX FFT Counters Table
|
|
--
|
|
|
|
rlIpxFftCountersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpxFftCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing IPX Counters information
|
|
per one IPX FFT."
|
|
::= { rlIpxFFT 15 }
|
|
|
|
rlIpxFftCountersEntry OBJECT-TYPE
|
|
SYNTAX RlIpxFftCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the IP Counters
|
|
information containing amount of IPX datagrams passed
|
|
by certain IPX FFT."
|
|
INDEX { rlIpxFftCountersIndex }
|
|
::= { rlIpxFftCountersTable 1 }
|
|
|
|
RlIpxFftCountersEntry ::= SEQUENCE {
|
|
rlIpxFftCountersIndex INTEGER,
|
|
rlIpxFftInReceives INTEGER,
|
|
rlIpxFftForwDatagrams INTEGER,
|
|
rlIpxFftInDiscards INTEGER
|
|
}
|
|
|
|
rlIpxFftCountersIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the index of the IPX FFT."
|
|
::= { rlIpxFftCountersEntry 1 }
|
|
|
|
rlIpxFftInReceives OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of received IPX datagrams "
|
|
::= { rlIpxFftCountersEntry 2 }
|
|
|
|
rlIpxFftForwDatagrams OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of forwarded IPX datagrams "
|
|
::= { rlIpxFftCountersEntry 3 }
|
|
|
|
rlIpxFftInDiscards OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of discarded IPX datagrams "
|
|
::= { rlIpxFftCountersEntry 4 }
|
|
|
|
---
|
|
--- rlIpmFFT
|
|
---
|
|
|
|
rlIpmFFT OBJECT IDENTIFIER ::= { rlFFT 3 }
|
|
|
|
rlIpmFftMibVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MIB's version, the current version is 1."
|
|
::= { rlIpmFFT 1 }
|
|
|
|
rlIpmMaxFftNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximun number of IPM FFTs. NT_IPM gets a number
|
|
from Host Parameters"
|
|
::= { rlIpmFFT 2 }
|
|
|
|
rlIpmFftDynamicSupported OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
supported (1),
|
|
unsupported (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether dynamic IPM FFTs are supported.
|
|
An NT_IPM gets a number from Host Parameters"
|
|
::= { rlIpmFFT 3 }
|
|
|
|
rlIpmFftUnknownAddrMsgUsed OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
used (1),
|
|
unused (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Specifies whether the 3SW uses the unknown address message.
|
|
An NT_IPM gets a number from Host Parameters"
|
|
::= { rlIpmFFT 4 }
|
|
|
|
rlIpmFftUserAgingTimeout OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The aging timeout in seconds. SNMP user writes.
|
|
There is a default value of aging timeout."
|
|
::= { rlIpmFFT 5 }
|
|
|
|
rlIpmFftRouterAgingTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The aging timeout in seconds. NT_IPM keeps value that
|
|
Router level gave. This is high priority value for aging timeout."
|
|
::= { rlIpmFFT 6 }
|
|
|
|
--rlIpmFftPollingInterval OBJECT-TYPE
|
|
-- SYNTAX INTEGER
|
|
-- MAX-ACCESS read-only
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The polling interval for dynamic IPM FFT's support in seconds."
|
|
-- ::= { rlIpmFFT 7 }
|
|
|
|
|
|
--
|
|
-- The IPM FFT Number Routers Table
|
|
--
|
|
|
|
rlIpmFftNumTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpmFftNumEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing number routes of
|
|
the IPM Fast Forwarding Table. "
|
|
::= { rlIpmFFT 8 }
|
|
|
|
rlIpmFftNumEntry OBJECT-TYPE
|
|
SYNTAX RlIpmFftNumEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the containing number routes of
|
|
an IPM FFT."
|
|
INDEX { rlIpmFftNumIndex }
|
|
::= { rlIpmFftNumTable 1 }
|
|
|
|
RlIpmFftNumEntry ::= SEQUENCE {
|
|
rlIpmFftNumIndex INTEGER,
|
|
rlIpmFftNumRoutesNumber INTEGER
|
|
}
|
|
|
|
rlIpmFftNumIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the index of the IPM FFT."
|
|
::= { rlIpmFftNumEntry 1 }
|
|
|
|
rlIpmFftNumRoutesNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of routes containing in the IPM FFT."
|
|
::= { rlIpmFftNumEntry 2 }
|
|
|
|
--
|
|
-- The IPM Fast Forwarding Table
|
|
--
|
|
|
|
rlIpmFftTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpmFftEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing IPM Fast Forwarding information
|
|
for IPM datagrams."
|
|
::= { rlIpmFFT 9 }
|
|
|
|
rlIpmFftEntry OBJECT-TYPE
|
|
SYNTAX RlIpmFftEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the IPM fast forwarding
|
|
information for IP datagrams from a particular source and
|
|
destination addresses."
|
|
INDEX { rlIpmFftIndex, rlIpmFftSrcIpAddress, rlIpmFftDstIpAddress }
|
|
::= { rlIpmFftTable 1 }
|
|
|
|
RlIpmFftEntry ::= SEQUENCE {
|
|
rlIpmFftIndex INTEGER,
|
|
rlIpmFftSrcIpAddress IpAddress,
|
|
rlIpmFftDstIpAddress IpAddress,
|
|
rlIpmFftSrcIpMask IpAddress,
|
|
rlIpmFftInputIfIndex INTEGER,
|
|
rlIpmFftInputVlanTag INTEGER,
|
|
rlIpmFftForwardAction INTEGER,
|
|
rlIpmFftInportAction INTEGER,
|
|
rlIpmFftAge INTEGER
|
|
}
|
|
|
|
rlIpmFftIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the index of the IPM FFT. "
|
|
::= { rlIpmFftEntry 1 }
|
|
|
|
rlIpmFftSrcIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP source address for which this entry
|
|
contains IPM forwarding information."
|
|
::= { rlIpmFftEntry 2 }
|
|
|
|
rlIpmFftDstIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPM destination address for which this entry
|
|
contains IPM forwarding information."
|
|
::= { rlIpmFftEntry 3 }
|
|
|
|
rlIpmFftSrcIpMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP source mask for which this entry
|
|
contains IP forwarding information."
|
|
::= { rlIpmFftEntry 4 }
|
|
|
|
rlIpmFftInputIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The input ifIndex for which this entry
|
|
contains IPM forwarding information."
|
|
::= { rlIpmFftEntry 5 }
|
|
|
|
rlIpmFftInputVlanTag OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The input Vlan tag together with input ifIndex defines
|
|
pair (ifIndex, tag)"
|
|
::= { rlIpmFftEntry 6 }
|
|
|
|
rlIpmFftForwardAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
forward(1),
|
|
discard (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPM forward action."
|
|
::= { rlIpmFftEntry 7 }
|
|
|
|
rlIpmFftInportAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
sentToCPU(1),
|
|
discard (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPM illegal input port action."
|
|
::= { rlIpmFftEntry 8 }
|
|
|
|
rlIpmFftAge OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The age of the entry in seconds from the moment of inserting. "
|
|
::= { rlIpmFftEntry 9 }
|
|
|
|
--
|
|
-- The IPM FFT Output Port and Tag Table
|
|
--
|
|
|
|
rlIpmFftPortTagTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpmFftPortTagEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing IPM FFT output port tag information
|
|
for IPM datagrams."
|
|
::= { rlIpmFFT 10 }
|
|
|
|
rlIpmFftPortTagEntry OBJECT-TYPE
|
|
SYNTAX RlIpmFftPortTagEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the IPM FFT output port tag
|
|
information for IP datagrams from a particular source and
|
|
destination addresses."
|
|
INDEX { rlIpmFftPortIndex, rlIpmFftPortSrcIpAddress,
|
|
rlIpmFftPortDstIpAddress, rlIpmFftPortOutputifIndex,
|
|
rlIpmFftPortOutputTag }
|
|
::= { rlIpmFftPortTagTable 1 }
|
|
|
|
RlIpmFftPortTagEntry ::= SEQUENCE {
|
|
rlIpmFftPortIndex INTEGER,
|
|
rlIpmFftPortSrcIpAddress IpAddress,
|
|
rlIpmFftPortDstIpAddress IpAddress,
|
|
rlIpmFftPortOutputifIndex INTEGER,
|
|
rlIpmFftPortOutputTag INTEGER
|
|
}
|
|
|
|
rlIpmFftPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the index of the IPM FFT. "
|
|
::= { rlIpmFftPortTagEntry 1 }
|
|
|
|
rlIpmFftPortSrcIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP source address for which this entry
|
|
contains IPM output port tag information."
|
|
::= { rlIpmFftPortTagEntry 2 }
|
|
|
|
rlIpmFftPortDstIpAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IPM destination address for which this entry
|
|
contains IPM port tag information."
|
|
::= { rlIpmFftPortTagEntry 3 }
|
|
|
|
rlIpmFftPortOutputifIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The output ifIndex "
|
|
::= { rlIpmFftPortTagEntry 4 }
|
|
|
|
rlIpmFftPortOutputTag OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The output Vlan tag together with output ifIndex defines
|
|
pair (ifIndex, tag)"
|
|
::= { rlIpmFftPortTagEntry 5 }
|
|
|
|
--
|
|
-- The IPM FFT Counters Table
|
|
--
|
|
|
|
rlIpmFftCountersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlIpmFftCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The (conceptual) table containing IPM Counters information
|
|
per FFT number. "
|
|
::= { rlIpmFFT 11 }
|
|
|
|
rlIpmFftCountersEntry OBJECT-TYPE
|
|
SYNTAX RlIpmFftCountersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the IPM Counters
|
|
information containing amount of IPM datagrams passed by certain FFT."
|
|
INDEX { rlIpmFftCountersIndex }
|
|
::= { rlIpmFftCountersTable 1 }
|
|
|
|
RlIpmFftCountersEntry ::= SEQUENCE {
|
|
rlIpmFftCountersIndex INTEGER,
|
|
rlIpmFftInReceives INTEGER,
|
|
rlIpmFftForwDatagrams INTEGER,
|
|
rlIpmFftInDiscards INTEGER
|
|
}
|
|
|
|
rlIpmFftCountersIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of the index of the IPM FFT. "
|
|
::= { rlIpmFftCountersEntry 1 }
|
|
|
|
rlIpmFftInReceives OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of received IPM datagrams "
|
|
::= { rlIpmFftCountersEntry 2 }
|
|
|
|
rlIpmFftForwDatagrams OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of forwarded IPM datagrams "
|
|
::= { rlIpmFftCountersEntry 3 }
|
|
|
|
rlIpmFftInDiscards OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of discarded IPM datagrams "
|
|
::= { rlIpmFftCountersEntry 4 }
|
|
|
|
END
|
|
|