mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
Files
a0bfb6da9e68a2a3d58bafbe03a27ce4a4edaf00
librenms-librenms/mibs/FDRY-MPLS-L2VPN-MIB
Adam Amstrong 8c83b6a3c7 update foundry mibs 
git-svn-id: http://www.observium.org/svn/observer/trunk@3250 61d68cd4-352d-0410-923a-c4978735b2b8
2012-05-29 13:08:01 +00:00

900 lines
33 KiB
Plaintext
Raw Blame History

FDRY-MPLS-L2VPN-MIB DEFINITIONS ::= BEGIN
IMPORTS
NOTIFICATION-TYPE, MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32, Counter64
FROM SNMPv2-SMI -- [RFC2578]
TEXTUAL-CONVENTION, RowStatus, TruthValue
FROM SNMPv2-TC -- [RFC2579]
InterfaceIndex
FROM IF-MIB -- [RFC2863]
VlanTagMode, PortPriorityTC
FROM FOUNDRY-SN-SWITCH-GROUP-MIB -- [snswitch]
snMpls
FROM FOUNDRY-SN-ROOT-MIB -- [snroot]
vplsConfigName, vplsConfigIndex, vplsConfigEntry
FROM VPLS-GENERIC-DRAFT-01-MIB -- [draft-ietf-l2vpn-vpls-mib-00]
PwOperStatusTC, PwVlanCfg
FROM PW-TC-STD-MIB -- [draft-ietf-pw3-pw-tc-mib-11]
pwIndex, pwName, pwID, fdryPwServiceType
FROM PW-STD-MIB -- [draft-ietf-pw3-pw-mib-11]
pwEnetPwInstance
FROM PW-ENET-STD-MIB -- [draft-ietf-pw3-enet-mib-11]
;
fdryMplsL2VpnMIB MODULE-IDENTITY
LAST-UPDATED "201006020000Z" -- 04 June 2010
ORGANIZATION "Brocade Communications Systems, Inc."
CONTACT-INFO
"Technical Support Center
130 Holger Way,
San Jose, CA 95134
Email: ipsupport@brocade.com
Phone: 1-800-752-8061
URL: www.brocade.com"
DESCRIPTION
"The Brocade proprietary MIB module for L2 VPN.
This mib is built on the current L2VPN draft mib.
It has additional information for Virtual Leased Line (VLL),
VLL-Local and Virtual Private LAN Service (VPLS) Endpoints,
as well as for VPLS Instance.
Copyright 1996-2010 Brocade Communications Systems, Inc.
All rights reserved.
This Brocade Communications Systems SNMP Management Information Base Specification
embodies Brocade Communications Systems' confidential and proprietary
intellectual property. Brocade Communications Systems retains all
title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications Systems makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the specification, and any unintended
consequence it may on the user environment."
REVISION "201006020000Z" -- 04 June 2010
DESCRIPTION
"Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."
REVISION "200802070000Z" -- 7 February 2008
DESCRIPTION
"Initial revision"
::= { snMpls 2 }
--
-- Textual Conventions
--
MplsServiceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"MPLS VLL service types, VLL, VLL-local or VPLS."
SYNTAX INTEGER{
vll(1),
vllLocal(2),
vpls(3)
}
AdminStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Administrative status of a given management entity."
SYNTAX INTEGER{
up(1), -- ready to pass packets
down(2), -- can't pass packets
testing(3) -- in some test mode
}
ClassOfService ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Class Of Service (COS) value of a given management entity.
Value 255 means that COS is not explicitly configured. Valid COS values
are between 0 and 7."
SYNTAX Unsigned32(0..7 | 255)
Layer2StateTC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Specifies the layer2 state a given interface can take.."
SYNTAX INTEGER{ -- picked from Syntax of dot1dStpPortState
disabled(1),
blocking(2),
listening(3),
learning(4),
preforwarding(5),
forwarding(6)
}
--
-- Top level components of this MIB.
--
fdryMplsVpnNotifications OBJECT IDENTIFIER ::= { fdryMplsL2VpnMIB 0 }
fdryMplsVllInfo OBJECT IDENTIFIER ::= { fdryMplsL2VpnMIB 1 } -- Includes VLL and VLL-Local
fdryMplsVplsInfo OBJECT IDENTIFIER ::= { fdryMplsL2VpnMIB 2 }
--
-- L2 VPN VLL and VLL-Local Endpoint table
--
fdryVllEndPointTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdryVllEndPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies information about the VLL and VLL-local endpoints which are not
available in the PW tables."
::= { fdryMplsVllInfo 1 }
fdryVllEndPointEntry OBJECT-TYPE
SYNTAX FdryVllEndPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents a VLL or VLL-local end point for a
pseudo-wire (PW) virtual connection across a packet network.
For a VLL, we would have one instance of this table for a given PW.
For a VLL-local, there would be two instances of this table for a given PW.
It is indexed by fdryVllEndPointServiceType, pwIndex, and pwEnetPwInstance.
The pwIndex is the index of pwTable, and {pwIndex, pwEnetPwInstance} together
provides an instance in the pwEnetTable.
A row can be created by an operator command after having created a row
in the pwTable and pwEnetTable.
1) Objects MUST NOT be changed after row activation.
2) Objects MAY be changed when the PW is
defined as not active. A change of these objects involves
re-signaling of the PW or it might be traffic affecting.
End point not active is defined as one of the following
conditions:
a) The pwRowStatus is notInService(2).
b) The pwRowStatus is notReady(3).
c) The pwAdminStatus is down(2).
"
INDEX {fdryVllEndPointServiceType, pwIndex, pwEnetPwInstance}
::= { fdryVllEndPointTable 1 }
FdryVllEndPointEntry ::= SEQUENCE {
fdryVllEndPointServiceType MplsServiceType ,
fdryVllEndPointVlanTagMode VlanTagMode,
fdryVllEndPointClassOfService ClassOfService,
fdryVllEndPointInHCPkts Counter64,
fdryVllEndPointOutHCPkts Counter64,
fdryVllEndPointAdminStatus AdminStatus,
fdryVllEndPointOperStatus PwOperStatusTC,
fdryVllEndPointRowStatus RowStatus,
fdryVllEndPointInnerVlanId PwVlanCfg,
fdryVllEndPointInHCOctets Counter64,
fdryVllEndPointOutHCOctets Counter64
}
fdryVllEndPointServiceType OBJECT-TYPE
SYNTAX MplsServiceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A service type indicating VLL or VLL-local service for this endpoint.
The value vpls(3) is not used in this table.
"
::= { fdryVllEndPointEntry 1 }
fdryVllEndPointVlanTagMode OBJECT-TYPE
SYNTAX VlanTagMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value indicates the vlan mode for this endpoint. The values,
dual(3) and other(4) is not used in this table.
"
::= { fdryVllEndPointEntry 2 }
fdryVllEndPointClassOfService OBJECT-TYPE
SYNTAX ClassOfService
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value indicates the Class Of Service for this endpoint.
For VLL, this value is used to select the appropriate tunnel
whose COS value is either same, or almost approaching this value.
For VLL-local, this value is applied to the ingress packet of an endpoint
"
DEFVAL {0}
::= { fdryVllEndPointEntry 3 }
fdryVllEndPointInHCPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates the number of packets ingressing into this endpoint.
This counter is not supported in CES/CER platform.
"
::= { fdryVllEndPointEntry 4 }
fdryVllEndPointOutHCPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates the number of packets egressing out from this endpoint.
For VLL-local, this value could be the fdryVllEndPointInHCPkts of the other endpoint
of this VLL instance. But since rate limit could be applied to the incoming packet,
the count value will not be accurate. Due to this, the value will be 0 for VLL-local.
This counter is not supported in CES/CER platform.
"
::= { fdryVllEndPointEntry 5 }
fdryVllEndPointAdminStatus OBJECT-TYPE
SYNTAX AdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired administrative status of this endpoint. This object MAY
be set at any time.
"
::= { fdryVllEndPointEntry 6 }
fdryVllEndPointOperStatus OBJECT-TYPE
SYNTAX PwOperStatusTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the operational status of this endpoint.
Only values up(1), down(2) are used in this table
"
::= { fdryVllEndPointEntry 7 }
fdryVllEndPointRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table is in active(1) state, no objects in that row
can be modified except this object, and the fdryVllEndPointAdminStatus.
"
::= { fdryVllEndPointEntry 8 }
fdryVllEndPointInnerVlanId OBJECT-TYPE
SYNTAX PwVlanCfg
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value indicates the inner vlan id for this endpoint.
Returns 0 if not configured or is not supported.
"
DEFVAL { 0 }
::= { fdryVllEndPointEntry 9 }
fdryVllEndPointInHCOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates the number of octets ingressing into this endpoint
from a Customer Edge (CE) device.
This counter is supported in CES/CER platform.
"
::= { fdryVllEndPointEntry 10 }
fdryVllEndPointOutHCOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates the number of octets egressing out from this endpoint towards
the Customer Edge (CE) device.
This counter is not supported in CES/CER platform.
Within CES/CER, any packet coming in from the tunnel will have its MPLS header as part of the octet count.
"
::= { fdryVllEndPointEntry 11 }
--
-- L2 VPN VLL and VLL-Local Endpoint Extended Statistics table
--
brcdVllEndptVlanExtStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BrcdVllEndptVlanExtStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the VLAN extended statistics
for VLL endpoints."
::= { fdryMplsVllInfo 2 }
brcdVllEndptVlanExtStatsEntry OBJECT-TYPE
SYNTAX BrcdVllEndptVlanExtStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents a VLAN extended statistics
accounting entry of a VLL endpoint."
INDEX { fdryVllEndPointServiceType,
pwIndex,
pwEnetPwInstance,
brcdVllEndptVlanExtStatsPriorityId
}
::= { brcdVllEndptVlanExtStatsTable 1 }
BrcdVllEndptVlanExtStatsEntry ::= SEQUENCE {
brcdVllEndptVlanExtStatsPriorityId
PortPriorityTC,
brcdVllEndptVlanExtStatsInPkts
Counter64,
brcdVllEndptVlanExtStatsOutPkts
Counter64,
brcdVllEndptVlanExtStatsInOctets
Counter64,
brcdVllEndptVlanExtStatsOutOctets
Counter64
}
brcdVllEndptVlanExtStatsPriorityId OBJECT-TYPE
SYNTAX PortPriorityTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the port QOS priority.
The values 1 through 8 internally maps to priorities 0 through 7.
The value 128 indicates that priority-level accounting is not enabled"
::= { brcdVllEndptVlanExtStatsEntry 1 }
brcdVllEndptVlanExtStatsInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid frames received by this endpoint
from the Customer Edge (CE)."
::= { brcdVllEndptVlanExtStatsEntry 2 }
brcdVllEndptVlanExtStatsOutPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid frames transmitted by this endpoint
to the Customer Edge (CE)."
::= { brcdVllEndptVlanExtStatsEntry 3 }
brcdVllEndptVlanExtStatsInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bytes count received by this endpoint from the Customer Edge (CE)."
::= { brcdVllEndptVlanExtStatsEntry 4 }
brcdVllEndptVlanExtStatsOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bytes count transmitted by this endpoint to
the Customer Edge (CE)."
::= { brcdVllEndptVlanExtStatsEntry 5 }
-- Deprecated table fdryVplsEndPointTable
fdryVplsEndPointTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdryVplsEndPointEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This table specifies information about the VPLS endpoints which are not
available in the PW mib, or VPLS draft mib."
::= { fdryMplsVplsInfo 1 }
fdryVplsEndPointEntry OBJECT-TYPE
SYNTAX FdryVplsEndPointEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A row in this table represents a VPLS end point for a
given VPLS instance. The VPLS instance is represented
by vplsConfigTable and fdryVplsTable.
For a given VPLS instance, there could be multiple instances
of rows within this table, each describing one endpoint.
For a given endpoint, there will be one VPLS instance.
A given endpoint is represented by vplsConfigIndex (VPLS instance),
vlan id, and ifIndex of the physical port which is acting as an endpoint.
This allows a tagged port to be associated with multiple VPLS instances.
An untagged port can only be associated with one VPLS instance.
Note that this table is kept independent of the PW tables to indicate
that endpoints terminate on the VPLS instance.
On the other side, a VPLS instance will have association with the PW MIB.
This table is indexed by vplsConfigIndex, fdryVplsEndPointPortVlan,
and fdryVplsEndPointIfIndex.
"
INDEX {vplsConfigIndex, fdryVplsEndPointPortVlan, fdryVplsEndPointIfIndex}
::= { fdryVplsEndPointTable 1 }
FdryVplsEndPointEntry ::= SEQUENCE {
fdryVplsEndPointPortVlan PwVlanCfg ,
fdryVplsEndPointIfIndex InterfaceIndex,
fdryVplsEndPointVlanTagMode VlanTagMode,
fdryVplsEndPointOutHCPkts Counter64,
fdryVplsEndPointState INTEGER,
fdryVplsEndPointAdminStatus AdminStatus,
fdryVplsEndPointOperStatus PwOperStatusTC,
fdryVplsEndPointRowStatus RowStatus,
fdryVplsEndPointInHCOctets Counter64
}
fdryVplsEndPointPortVlan OBJECT-TYPE
SYNTAX PwVlanCfg
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This value specifies the VLAN id value of this endpoint.
"
::= { fdryVplsEndPointEntry 1 }
fdryVplsEndPointIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"This value specifies the ifIndex value of this endpoint.
"
::= { fdryVplsEndPointEntry 2 }
fdryVplsEndPointVlanTagMode OBJECT-TYPE
SYNTAX VlanTagMode
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"This value indicates the vlan mode for this endpoint. The values,
dual(3) and other(4) is not used in this table.
"
::= { fdryVplsEndPointEntry 3 }
fdryVplsEndPointOutHCPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This counter indicates the number of packets egressing
out from this endpoint towards the Customer Edge (CE).
This value counts packets coming from multiple pseudo-wires
towards the endpoint, as well as locally switched packets
between other endpoints to this endpoint, all belonging
to the same VPLS instance.
The value gives count of known unicast packets only.
Unknown unicast and broadcast packets are not counted.
This object is not supported in CES/CER.
"
::= { fdryVplsEndPointEntry 4 }
fdryVplsEndPointState OBJECT-TYPE
SYNTAX INTEGER { -- picked from Syntax of dot1dStpPortState
disabled(1),
blocking(2),
forwarding(5)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A L2 state of this VPLS endpoint.
"
::= { fdryVplsEndPointEntry 5 }
fdryVplsEndPointAdminStatus OBJECT-TYPE
SYNTAX AdminStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The desired administrative status of this endpoint. This object MAY
be set at any time.
"
::= { fdryVplsEndPointEntry 6 }
fdryVplsEndPointOperStatus OBJECT-TYPE
SYNTAX PwOperStatusTC
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object indicates the operational status of this endpoint.
Only values up(1), down(2) are used in this table
"
::= { fdryVplsEndPointEntry 7 }
fdryVplsEndPointRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table is in active(1) state, no objects in that row
can be modified except this object and the fdryVplsEndPointAdminStatus.
"
::= { fdryVplsEndPointEntry 8 }
fdryVplsEndPointInHCOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This counter indicates the number of octets ingressing
into this endpoint from the Customer Edge (CE).
This object is supported in CES/CER only.
"
::= { fdryVplsEndPointEntry 9 }
--
-- L2 VPN VPLS Endpoint table
--
fdryVplsEndPoint2Table OBJECT-TYPE
SYNTAX SEQUENCE OF FdryVplsEndPoint2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies information about the VPLS endpoints which are not
available in the PW mib, or VPLS draft mib.
This table deprecates fdryVplsEndPointTable, as inner VLAN and ISID
has been added as index to this table."
::= { fdryMplsVplsInfo 3 }
fdryVplsEndPoint2Entry OBJECT-TYPE
SYNTAX FdryVplsEndPoint2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents a VPLS end point for a
given VPLS instance. The VPLS instance is represented
by vplsConfigTable and fdryVplsTable.
For a given VPLS instance, there could be multiple instances
of rows within this table, each describing one endpoint.
For a given endpoint, there will be one VPLS instance.
A given endpoint is represented by vplsConfigIndex (VPLS instance),
vlan id, inner-id (inner VLAN or ISID),and ifIndex of the physical port which is acting as an endpoint.
This allows a tagged port to be associated with multiple VPLS instances, and also many inner VLAN or ISID
to be associated with a tagged port (outer VLAN tag)
An untagged port can only be associated with one VPLS instance.
Note that this table is kept independent of the PW tables to indicate
that endpoints terminate on the VPLS instance.
On the other side, a VPLS instance will have association with the PW MIB.
This table is indexed by vplsConfigIndex, fdryVplsEndPointPortVlan,
and fdryVplsEndPointIfIndex.
"
INDEX {vplsConfigIndex,
fdryVplsEndPoint2VlanId,
fdryVplsEndPoint2InnerTagType, --inner vlan or ISID
fdryVplsEndPoint2InnerTag,
fdryVplsEndPoint2IfIndex}
::= { fdryVplsEndPoint2Table 1 }
FdryVplsEndPoint2Entry ::= SEQUENCE {
fdryVplsEndPoint2VlanId PwVlanCfg ,
fdryVplsEndPoint2InnerTagType INTEGER,
fdryVplsEndPoint2InnerTag Unsigned32,
fdryVplsEndPoint2IfIndex InterfaceIndex,
fdryVplsEndPoint2VlanTagMode VlanTagMode,
fdryVplsEndPoint2InHCOctets Counter64,
fdryVplsEndPoint2Layer2State Layer2StateTC,
fdryVplsEndPoint2OperStatus PwOperStatusTC,
fdryVplsEndPoint2RowStatus RowStatus
}
fdryVplsEndPoint2VlanId OBJECT-TYPE
SYNTAX PwVlanCfg
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This value specifies the VLAN id value of this endpoint.
"
::= { fdryVplsEndPoint2Entry 1 }
fdryVplsEndPoint2InnerTagType OBJECT-TYPE
SYNTAX INTEGER {invalid(1),innerVlan(2), isid(3)}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This value indicates the inner id for this endpoint.
If no inner tag is specified, value invalid(1) is returned.
"
::= { fdryVplsEndPoint2Entry 2 }
fdryVplsEndPoint2InnerTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This value indicates the inner tag for this endpoint.
If the index fdryVplsEndPoint2InnerTagType has
value isid(3), then this object will have the
ISID value for that endpoint. Valid ISID value
is between 256 (0x100) and 16777214 (0xFFFFFE).
If no inner tag is specified, value 0 is returned.
"
::= { fdryVplsEndPoint2Entry 3 }
fdryVplsEndPoint2IfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This value specifies the ifIndex value of this endpoint.
"
::= { fdryVplsEndPoint2Entry 4 }
fdryVplsEndPoint2VlanTagMode OBJECT-TYPE
SYNTAX VlanTagMode
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value indicates the vlan mode for this endpoint. The values,
dual(3) and other(4) is not used in this table.
"
::= { fdryVplsEndPoint2Entry 5 }
fdryVplsEndPoint2InHCOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter indicates the number of octets ingressing
into this endpoint from the Customer Edge (CE).
This object is supported in CES/CER only.
"
::= { fdryVplsEndPoint2Entry 6 }
fdryVplsEndPoint2Layer2State OBJECT-TYPE
SYNTAX Layer2StateTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The L2 state of this VPLS endpoint.
"
::= { fdryVplsEndPoint2Entry 7 }
fdryVplsEndPoint2OperStatus OBJECT-TYPE
SYNTAX PwOperStatusTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the operational status of this endpoint.
Only values up(1), down(2) are used in this table
"
::= { fdryVplsEndPoint2Entry 8 }
fdryVplsEndPoint2RowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table is in active(1) state, no objects in that row
can be modified except this object.
"
::= { fdryVplsEndPoint2Entry 9 }
--
-- L2 VPN VPLS Instance Table
--
fdryVplsTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdryVplsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies additional information about the VPLS instance configuration
which is not available in the VplsConfigTable. Some of these
objects are configuration specific, some are commands specific
to that VPLS instance."
::= { fdryMplsVplsInfo 2 }
fdryVplsEntry OBJECT-TYPE
SYNTAX FdryVplsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents a VPLS instance. It augments
the vplsConfigTable in the VPLS draft mib.
"
AUGMENTS { vplsConfigEntry }
::= { fdryVplsTable 1 }
FdryVplsEntry ::= SEQUENCE {
fdryVplsClassOfService ClassOfService ,
fdryVplsMaxMacLearned Unsigned32,
fdryVplsClearMac TruthValue,
fdryVplsVcId Unsigned32
}
fdryVplsClassOfService OBJECT-TYPE
SYNTAX ClassOfService
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value indicates the Class Of Service for this VPLS instance.
This value is used to select the appropriate tunnel
whose COS value is either same, or almost approaching this value.
"
DEFVAL {0}
::= { fdryVplsEntry 1 }
fdryVplsMaxMacLearned OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates the maximum number of MAC addresses
that can be learned by this VPLS instance.
"
::= { fdryVplsEntry 2}
fdryVplsClearMac OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Set value of TRUE tells the system to clear all the MAC addresses
learned by this VPLS instance. Setting value of FALSE will return an error.
During read operations, value FALSE will be returned at all times.
"
::= { fdryVplsEntry 3}
fdryVplsVcId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VPLS Instance ID of a given VPLS session.
"
::= { fdryVplsEntry 4}
--
-- L2 VPN VPLS Endpoint Extended Statistics table
--
brcdVplsEndptVlanExtStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BrcdVplsEndptVlanExtStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the VLAN extended statistics for VPLS endpoints."
::= { fdryMplsVplsInfo 4 }
brcdVplsEndptVlanExtStatsEntry OBJECT-TYPE
SYNTAX BrcdVplsEndptVlanExtStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in this table represents a VLAN extended statistics
accounting entry of a VPLS endpoint."
INDEX {vplsConfigIndex,
fdryVplsEndPoint2VlanId,
fdryVplsEndPoint2InnerTagType,
fdryVplsEndPoint2InnerTag,
fdryVplsEndPoint2IfIndex,
brcdVplsEndptVlanExtStatsPriorityId }
::= { brcdVplsEndptVlanExtStatsTable 1 }
BrcdVplsEndptVlanExtStatsEntry ::= SEQUENCE {
brcdVplsEndptVlanExtStatsPriorityId
PortPriorityTC,
brcdVplsEndptVlanExtStatsInPkts
Counter64,
brcdVplsEndptVlanExtStatsOutPkts
Counter64,
brcdVplsEndptVlanExtStatsInOctets
Counter64,
brcdVplsEndptVlanExtStatsOutOctets
Counter64
}
brcdVplsEndptVlanExtStatsPriorityId OBJECT-TYPE
SYNTAX PortPriorityTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the port QOS priority.
The values 1 through 8 internally maps to priorities 0 through 7.
The value 128 indicates that priority-level accounting is not enabled"
::= { brcdVplsEndptVlanExtStatsEntry 1 }
brcdVplsEndptVlanExtStatsInPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid frames received by this endpoint from
the Customer Edge (CE)."
::= { brcdVplsEndptVlanExtStatsEntry 2 }
brcdVplsEndptVlanExtStatsOutPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid frames transmitted by this endpoint to
the Customer Edge (CE)."
::= { brcdVplsEndptVlanExtStatsEntry 3 }
brcdVplsEndptVlanExtStatsInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bytes count received by this endpoint from
the Customer Edge (CE)."
::= { brcdVplsEndptVlanExtStatsEntry 4 }
brcdVplsEndptVlanExtStatsOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bytes count transmitted by this endpoint to
the Customer Edge (CE)."
::= { brcdVplsEndptVlanExtStatsEntry 5 }
--
-- L2 VPN Service Notifications
--
fdryVplsCreated NOTIFICATION-TYPE
OBJECTS {
vplsConfigName, --VPLS name
fdryVplsVcId --VPLS VC ID
}
STATUS current
DESCRIPTION
"This notification is generated when an entry is created in
fdryVplsTable, indicating creation of a new VPLS instance.
This notification is not generated during system boot up time."
--#TYPE "Foundry Trap: MPLS VPLS Instance Created"
--#SUMMARY "VPLS %s (VC ID %d) has been created."
--#ARGUMENTS { 0, 1 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= { fdryMplsVpnNotifications 1 }
fdryVplsDeleted NOTIFICATION-TYPE
OBJECTS {
vplsConfigName, --VPLS name
fdryVplsVcId --VPLS VC ID
}
STATUS current
DESCRIPTION
"This notification is generated when one entry in the
fdryVplsTable have been marked for deletion, indicating
deletion of an existing VPLS instance."
--#TYPE "Foundry Trap: MPLS VPLS Instance Deleted"
--#SUMMARY "VPLS %s (VC ID %d) has been deleted."
--#ARGUMENTS { 0, 1 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= { fdryMplsVpnNotifications 2 }
fdryPwCreated NOTIFICATION-TYPE
OBJECTS {
fdryPwServiceType,
pwName, --VLL or VLL-Local name
pwID --VLL VC ID, value 0 for VLL-Local
}
STATUS current
DESCRIPTION
"This notification is generated when an instance of VLL or VLL-Local
pseudo-wire entry is created in the pwTable.
The varbind fdryPwServiceType has the service type which
originated this notification.
This notification is not used for VPLS service.
This notification is not generated during system boot up time"
--#TYPE "Foundry Trap: MPLS L2VPN Instance Created"
--#SUMMARY "L2VPN %d (1=VLL, 2=VLL-Local) Instance %s (VC ID %d) has been created."
--#ARGUMENTS { 0, 1, 2 }
--#SEVERITY INFORMATIONAL
--#STATE OPERATIONAL
::= { fdryMplsVpnNotifications 3 }
END
Reference in New Issue View Git Blame Copy Permalink