mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
Files
a6b69c9c4de9cb7d01cdfab15d5e35d23059482b
librenms-librenms/mibs/adic/ADIC-MANAGEMENT-MIB
Kevin Zink c1abbdc2c2 Add Quantum Scalar I6000 Tape Library (#14915) 
* Add Quantum Scalar I6000 Tape Library

* Update quantum.yaml

Poller  deactivation removed

* Update quantum_scalari6000.json

---------

Co-authored-by: Tony Murray <murraytony@gmail.com>
2023-11-02 00:29:08 -05:00

6130 lines
207 KiB
Plaintext
Raw Blame History

-- Name: ADIC Enterprise Management Control Blade (MCB) MIB
--
-- ADIC_MANAGEMENT_MIB.mib version 1.49
--
-- **********************************************************
-- * *
-- * SMI v1 version *
-- * *
-- **********************************************************
--
-- Copyright (c) 2002-2014 Quantum Corporation
--
-- Revision History:
-- $Log: ADIC_MANAGEMENT_MIB.mib $
-- Revision 1.49 2015/01/20 14:26:49MST Bob Ackerman (backerman)
-- Fix the RAS group traps to correctly reflect the 6 groups
-- Revision 1.48 2015/12/07 14:26:49MST Bob Ackerman (backerman)
-- Add module identify so that we can support dynamic module loading.
-- Revision 1.47 2015/08/05 14:26:49MST Bob Ackerman (backerman)
-- Remove the unsupported rasFruStatTable.
-- Revision 1.46 2015/01/08 14:26:49MST Bob Ackerman (backerman)
-- Rework the registration table to support IPv6 addresses and removed the phFrameTable
-- Revision 1.44 2014/03/12 14:26:49MST Carsten Prigge (cprigge)
-- Change the rasTicketPriority to rasTicketSeverity in the rasTicketTable
-- Revision 1.44 2014/03/03 14:26:49MST Carsten Prigge (cprigge)
-- More cleanup and add the vary state to the phDriveTable.
-- Revision 1.43 2014/02/20 14:26:49MST Carsten Prigge (cprigge)
-- Added 3 additional slot info variables in PhGeneralInfoEntry
-- Revision 1.43 2014/01/31 14:05:00MST Maurice Smulders (msmulders)
-- Change globalEthernetTable to readonly.
-- Revision 1.42 2014/01/29 10:26:49MST Bob Ackerman (backerman)
-- Change globalEthernetTable to allow multiple interfaces.
-- Revision 1.41 2013/09/16 10:26:49MST Carsten Prigge (cprigge)
-- Clean up MIB files to reduce errors from various MIB browsers
-- Revision 1.38 2006/11/01 10:26:49MST Darrel Somer (dsomer)
-- Sync up with master from mib project.
-- Revision 1.93 2005/02/16 18:07:58MST dhawthorne
-- Add trap #117, drive firmware update start
-- Revision 1.92 2004/12/03 17:07:40EST dhawthorne
-- Added trapIntendedUsage to trap 406 payload
-- Revision 1.91 2004/10/01 18:08:20EDT dhawthorne
-- Added noUnload(5) to operatingMode enum
-- Revision 1.90 2004/08/30 17:40:49EDT dhawthorne
-- Move networkTimeServer2 variable to the end of the globalStatusTable
-- Revision 1.89 2004/08/30 16:06:51EDT dhawthorne
-- Add second time server to globalStatusTable
-- Revision 1.88 2004/08/13 14:25:07EDT dhawthorne
-- Correct a typo
-- Revision 1.87 2004/08/13 14:20:14EDT dhawthorne
-- Add loMediaTypeCheckingPolicy (read/write)
-- Revision 1.86 2004/08/13 13:26:35EDT dhawthorne
-- Changed name of logical SN feature enable
-- Revision 1.85 2004/08/05 11:38:13EDT dhawthorne
-- Added driveLogicalSerialNumberMode
-- Revision 1.84 2004/03/29 17:53:59EST dhawthorne
-- Added totalRawCapcity, totalFreeCapacity, and totalUsedCapacity
-- Revision 1.83 2004/03/09 14:26:59EST dhawthorne
-- Added phDriveWwPortName.
-- Revision 1.82 2004/03/04 17:23:13EST dhawthorne
-- Change unimplemented tables/variables to status "optional"
-- Comment out unimplemented traps
-- Revision 1.81 2004/02/20 10:55:58EST dhawthorne
-- Added numPhFrames
-- Revision 1.80 2004/02/19 11:14:19EST dhawthorne
-- Update phDriveCommand description clause
-- Revision 1.79 2004/02/19 11:10:18EST dhawthorne
-- Add driveBrickUpdate(7) to phDriveCommand enumeration.
-- Revision 1.78 2004/02/19 10:58:27EST dhawthorne
-- Added installProcessStatus variables for mcb, cmb, rcu, fcb and amc
-- Revision 1.77 2004/02/02 15:03:29EST dhawthorne
-- Removed phDriveRow from drive FW update traps, added serial number and FW version
-- Revision 1.76 2004/01/23 17:37:09EST dhawthorne
-- Add element address range to trap # 116
-- Revision 1.75 2004/01/23 16:35:48EST dhawthorne
-- Add new trap, #116, physLibraryRESChange
-- Revision 1.74 2004/01/19 11:04:19EST dhawthorne
-- Added rasEventNotification trap.
-- Revision 1.73 2004/01/12 11:08:23EST dhawthorne
-- Add physLibraryConfigurationChange trap to MIB
-- Revision 1.72 2003/12/29 11:13:43EST dhawthorne
-- Added traps 113 and 114, drive brick firmware update success/failure
-- Revision 1.71 2003/12/17 17:43:40EST dhawthorne
-- Cleaned up some description clauses
-- Made loNumLibraries obsolete
-- Revision 1.70 2003/12/16 17:33:54EST dhawthorne
-- Incorporate i2k M2 changes to FDM interface (softwareInstallation table)
-- Revision 1.69 2003/12/16 15:19:32EST dhawthorne
-- Added ethernet preferredSpeed, actualSpeed, and duplex
-- Revision 1.68 2003/11/12 12:48:44EST dhawthorne
-- Changed loLtoTapeTags to have three state: prefix, suffix, disabled
-- Revision 1.67 2003/10/22 13:44:19EDT dhawthorne
-- Add driveActivityUpdate trap.
-- Revision 1.66 2003/09/30 17:47:20EDT dhawthorne
-- Added syncRcuToFlash(3) to installCommand
-- Revision 1.65 2003/09/25 12:23:39EDT dhawthorne
-- Added rasTicketFilterSeverity
-- Revision 1.64 2003/09/16 14:19:28EDT dhawthorne
-- Added rasReportHeadReport
-- Revision 1.63 2003/09/12 10:38:25EDT dhawthorne
-- Added rasTicketKeyReport variable
-- Revision 1.62 2003/09/10 13:52:22EDT dhawthorne
-- Added loLtoTapeTags to logiclaLibraryTable
-- Revision 1.61 2003/09/10 12:13:14EDT dhawthorne
-- Added phDriveErrorCodeBytes and phDriveRasStatus variables
-- Revision 1.60 2003/08/22 14:18:00EDT dhawthorne
-- Add rcuReady and rcuNotReady traps to Management MIB
-- Revision 1.59 2003/07/02 15:11:42EDT dhawthorne
-- Add installCommand and installStatusText variables
-- Revision 1.58 2003/05/01 12:26:00EDT dhawthorne
-- Added ieStationInventoryPerformed trap, # 109
-- Revision 1.57 2003/04/26 16:26:40EDT dhawthorne
-- Correct syntax error in AdicRasTicketState enum definition.
-- Revision 1.56 2003/04/23 16:41:04EDT dhawthorne
-- Added rasTIcketFilterTable
-- Create AdicRasTicketState type definition (enumerated type)
-- Added all(99) value to AdicStatusGroup enumeration
-- Revision 1.55 2003/04/21 11:55:08EDT dhawthorne
-- Changed AdicStatusGroupState enumeration to match Greg Prestas' code
-- Revision 1.54 2003/04/18 17:16:44EDT dhawthorne
-- Added RAS ticket time opened, time closed, and count
-- Revision 1.53 2003/04/15 13:15:22EDT dhawthorne
-- Create AutoPartitionTable
-- Moved numAutoPartition and mediaTypeCommand from MediaTypeTable to AutoPartitionTable
-- Renamed mediaTypeCommand to autoPartitionCommand
-- Revision 1.52 2003/04/09 13:02:52EDT dhawthorne
-- Declared new enumeration adicFcPortSpeed
-- Changed fcPortPreferredSpeed and fcPortNegotiatedSpeed to be of type adicFcPortSpeed, not INTEGER
-- Revision 1.51 2003/04/07 12:16:58EDT dhawthorne
-- Added trapSeverity varbind to traps 104 thru 108; these should all be informational(5) traps
-- Revision 1.50 2003/04/03 12:07:19EST dhawthorne
-- Added licenseKeyAppliedDate
-- Revision 1.49 2003/03/28 18:02:42EST dhawthorne
-- Added five new traps
-- Revision 1.48 2003/03/15 18:01:20EST dhawthorne
-- Changed wording of description clause for phDriveOnlineStatus
-- Revision 1.47 2003/03/15 17:50:00EST dhawthorne
-- Added phDriveOnlineStatus (read-only)
-- Revision 1.46 2003/03/15 17:07:53EST dhawthorne
-- Remove underscore character from fcPreferredPortType enumeration values (n_port, nl_port)
-- (Underscore is not strictly legal in an SMIv1 enumeration)
-- Declared AdicFcPortType type assignment - use it for fcPreferredPortType and fcNegotiatedPortType
-- Revision 1.45 2003/03/07 15:41:48EST dhawthorne
-- New group/table for FC port parameters
-- Revision 1.44 2003/02/05 16:34:39EST dhawthorne
-- Added rasFruStatSerialNumber and rasFruStatState
-- Added rasFruStatIndex
-- ** Re-Indexed FruStatTable: now indexed by componentId and fruStatIndex (not fruStatInstanceID) **
-- ** Put fruStatIndex first in table and shifted the remaining OIDs downward **
-- Revision 1.43 2003/02/04 15:08:02EST dhawthorne
-- Added license quantity variables.
-- Revision 1.42 2003/02/04 13:19:50EST dhawthorne
-- Made RAS ticket and report serial numbers read-only
-- Revision 1.41 2003/02/04 12:58:23EST dhawthorne
-- Added AdicFruSerialNumber type assignment
-- Added rasTicketSerialNumber
-- Added rasReportSerialNumber
-- Revision 1.40 2003/02/03 18:40:08EST dhawthorne
-- Added trigger to pull log files (logSnapshotCommand) and trap to indicate log retrieval is complete (logRetrievalComplete)
-- Correted enableDaylightSavingsTime to be of type AdicEnable
-- Revision 1.39 2003/01/13 18:37:02EST dhawthorne
-- Add enableDaylightSavingsTIme to globalStatusTable
-- Revision 1.38 2003/01/07 10:38:45MST dhawthorne
-- Import Gauge from RFC 1155-SMI
-- Import TRAP-TYPE from RFC-1215
-- Declare rasTicketClosedBy and rasTicketVerifedBy to be type INTEGER (were incorrectly declared as type AdicStatusGroup)
-- Revision 1.37 2003/01/06 11:24:57EST dhawthorne
-- Added ipAddressSubnetMask (read-write)
-- Revision 1.36 2002/12/23 18:49:15EST dhawthorne
-- Changed MIB to include index 4 in lo stat table
-- Revision 1.35 2002/12/21 13:49:14EST dhawthorne
-- MIB changes here - add ticketId and reportId to status change traps
-- Revision 1.34 2002/12/20 18:30:36EST dhawthorne
-- Changed rasReportSubsytem to rasReportStatusGroup and made it of type AdicStatusGroup.
--
-- Revision 1.33 2002/12/19 19:41:12EST dhawthorne
-- Removed RAS Ticket/Report traps
-- Broken System Status Trap in six traps, one for each status group.
-- Added rasReportRepeatCounter
-- Revision 1.32 2002/12/19 16:27:07EST dhawthorne
-- Added:
-- loStatsNumPuts INTEGER,
-- loStatsNumPutRetries INTEGER,
-- loStatsNumGetRetries INTEGER,
-- loStatsNumScanRetries INTEGER
-- Revision 1.31 2002/12/18 19:12:03EST dhawthorne
-- Added trapSummaryText field.
-- Revision 1.29 2002/12/18 16:18:20EST dhawthorne
-- Added rasReportOrcDescription to RAS report table
-- Revision 1.28 2002/12/17 11:52:38EST dhawthorne
-- Added RED id to IE station, drive and transport element tables
-- Revision 1.27 2002/12/16 16:00:27EST dhawthorne
-- Added trap definitions
-- Added I/E station table to allow traps to refer to exact I/E station
-- Revision 1.26 2002/12/13 20:44:16EST dhawthorne
-- Added numCleaningSlots to MediaDomainTable
-- Revision 1.25 2002/12/13 17:28:58MST dhawthorne
-- Added softwareInstallationTable
-- Revision 1.24 2002/12/12 09:44:27MST dhawthorne
-- Made logical library assigned LUN read-only
-- Also fixed a syntax error in the rasFruStatFruCategory enumeration: value 2 was used twice.
-- Revision 1.23 2002/12/12 09:18:01MST dhawthorne
-- Changed operatingMode access to read-write
-- Revision 1.22 2002/12/12 09:08:14MST dhawthorne
-- Changed Gauge32 declarartions to Gauge; Gauge32 is SMIv2 syntax
-- Revision 1.21 2002/12/10 17:17:58MST dhawthorne
-- Added ticket, report and FRU statistics table.
-- Defined AdicStatusGroup enumeration.
-- Revision 1.20 2002/12/07 17:39:13EST dhawthorne
-- Added rasSystemStatusTable to ADIC-MANAGEMENT-MIB
-- Revision 1.19 2002/12/06 22:04:16EST dhawthorne
-- Added phDriveStatHistoryTable
-- Revision 1.18 2002/12/06 16:08:57EST jmulder
-- None
-- Revision 1.17 2002/11/21 11:19:13MST dhawthorne
-- Corrected terminology.
-- Revision 1.15 2002/11/20 20:16:44EST dhawthorne
-- Use AdicEnable type assignement for RCU modes
-- Interface types are defined in IntelligentStorage MIB
-- Revision 1.14 2002/11/20 18:45:57EST dhawthorne
-- Added phIeSegCommand with a single value import(1)
-- Revision 1.13 2002/11/20 18:06:58EST dhawthorne
-- Added physLibraryAutoCleaning variable
-- Use AdicEnable where applicable
-- Revision 1.12 2002/11/20 17:02:10EST dhawthorne
-- Added physLibraryManagerLun to phGeneralInfoTable
-- Revision 1.11 2002/11/19 15:54:36EST dhawthorne
-- Changed loStatus enumeration to { online(1) offline(2) }
-- Revision 1.10 2002/11/08 16:49:08EST dhawthorne
-- Changed productName to productIdName to resolve jMIBC naming conflict
-- Revision 1.9 2002/10/08 16:40:12EDT dhawthorne
-- Corrected description clause of managementMibVersion object
-- Revision 1.8 2002/10/07 13:58:01EDT dhawthorne
-- Removed extra index (phIeSegIndex) from phIeSlotEntry INDEX clause
-- Changed index from "phCleaningRow" to "phCleaningMediaRow" in phCleaningMediaEntry INDEX clause
-- Commented out any imports which caused compiler warnings with Emissary compiler
-- Revision 1.7 2002/10/04 18:34:41EDT dhawthorne
-- Removed all enum or SIZE definitions from SEQUENCE clauses to satisfy jMIBc compiler
-- Revision 1.6 2002/10/03 12:16:55EDT dhawthorne
-- Changed AdicSegmentType enum to match enum used by robotics team
-- Revision 1.5 2002/08/26 16:41:08EDT dhawthorne
-- Remove hostIndex from registration table
-- Index by IP address and UDP port number
-- Revision 1.4 2002/08/23 11:09:02EDT dhawthorne
-- Removed userId from table
-- Moved userId to column 1 in UserEntry sequence
-- Replaced userId with userName in userEntry INDEX clause
-- Revision 1.3 2002/08/22 17:38:26EDT dhawthorne
-- Added networkTimeEnable object.
-- Revision 1.2 2002/08/13 18:31:47EDT dhawthorne
-- Added segment Starting Row to physical and logical segment tables
-- Re-indexed segment tables to include Starting Row in instance ID
-- Added phDriveSegMediaType and phDriveSegInterfaceType
-- Added loDriveSegMediaType and loDriveSegInterfaceType
-- Renamed phGeneralInfo.numMediaTypes to numElementDomains (still integer)
-- Revision 1.1 2002/08/12 09:53:03EDT jbruegger
-- Initial revision
-- Member imported to project e:/mks/projects/mib/mib.pj
--
ADIC-MANAGEMENT-MIB
DEFINITIONS ::= BEGIN
IMPORTS
Gauge,
IpAddress
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
DisplayString
FROM RFC1213-MIB
TRAP-TYPE
FROM RFC-1215
-- **********************************************************
-- * *
-- * Imports from ADIC-INTELLIGENT-STORAGE-MIB *
-- * *
-- **********************************************************
-- OID Hierarchy
hardware,
componentId,
-- Common and specific Trap Payload Objects
trapSequenceNumber,
trapSeverity,
trapSummaryText,
trapIntendedUsage,
trapInstance,
trapInstanceValue,
productName,
productSerialNumber,
--Type assignments
Boolean,
AdicEnable,
AdicAgentStatus,
AdicOnlineStatus,
AdicVaryStatus,
AdicInterfaceType,
AdicDateAndTime,
AdicMibVersion,
AdicComponentType,
RowStatus,
AdicDoorStatus,
AdicREDIdentifier,
AdicDriveStatus,
AdicTowerStatus
FROM ADIC-INTELLIGENT-STORAGE-MIB;
-- **********************************************************
-- * *
-- * ADIC MANAGEMENT MIB Definitions *
-- * *
-- **********************************************************
-- the mcb node can be located anywhere in the hierarchy
management MODULE-IDENTITY
LAST-UPDATED "201509240000Z"
ORGANIZATION "Quantum Corporation"
CONTACT-INFO
" Quantum Corporation
224 Airport Parkway, Suite 300
San Jose, CA 95110
Tel: +1 800 284-5101
E-mail: support@quantum.com"
DESCRIPTION
"This MIB provides Tape Library product information."
REVISION "201509240000Z"
DESCRIPTION
"MIB update as of September 2015"
::= { hardware 20 }
--
globalStatus OBJECT IDENTIFIER ::= { management 10 }
globalEthernetManager OBJECT IDENTIFIER ::= { management 15 }
systemManager OBJECT IDENTIFIER ::= { management 20 }
persistentData OBJECT IDENTIFIER ::= { management 30 }
security OBJECT IDENTIFIER ::= { management 40 }
licensing OBJECT IDENTIFIER ::= { management 50 }
eventManager OBJECT IDENTIFIER ::= { management 70 }
physicalLibrary OBJECT IDENTIFIER ::= { management 80 }
logicalLibrary OBJECT IDENTIFIER ::= { management 90 }
ras OBJECT IDENTIFIER ::= { management 100 }
-- **********************************************************
-- * *
-- * ADIC MCB MIB Textual Conventions *
-- * *
-- **********************************************************
AdicFruSerialNumber ::= DisplayString (SIZE( 0..40))
AdicBarCode ::= DisplayString (SIZE(0..36))
AdicSegmentType ::= INTEGER { gripper(1), storage(2), ie(3), drive(4) }
AdicInstallStatus ::= INTEGER { ok(1), inProgress(2), failed(3), updateAborted(4) }
-- Ethernet port definitions
AdicEthernetSpeed ::= INTEGER { baseT10(1), baseT100(2) }
-- Fibre Channel Port definitions
AdicFcPortType ::= INTEGER { auto(1), nPort(2), nlPort(3) }
AdicFcPortSpeed ::= INTEGER { auto(1), megabits1000(1000), megabits2000(2000), megabits4000(4000), megabits8000(8000) }
-- RAS definitions
AdicStatusGroup ::= INTEGER { connectivity(1), control(2), media(3), drives(4),
powerAndCooling(5), robotics(6), all(99) }
AdicStatusGroupState ::= INTEGER { good(1), failed(2), degraded(3), warning(4),
informational(5), unknown(6), invalid(7) }
AdicRasTicketState ::= INTEGER { new(1), open(2), suspended(3), closed(4), verified(5), all(99) }
AdicRasTicketSeverity ::= INTEGER { critical(1), degraded(2), warning(3), minor(4), informational(5) }
AdicRasTicketPriority ::= INTEGER { high(1), medium(2), low(3) }
AdicRasFruCategory ::= INTEGER { firmware(1), pcba(2), fan(3), accessor(4), picker(5),
power(6), cable(7), mailbox(8), drive(9), media(10),
label(11), hardware(12), environmental(13), interface(14),
process(15), gen2robot(16), tower(17) }
AdicControllerRole ::= INTEGER { master(1), slave(2) }
-- *****************************************************************
--
-- MCB Global Status Group
--
-- *****************************************************************
globalStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF GlobalStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides system date/time configuration and status information"
::= { globalStatus 10 }
globalStatusEntry OBJECT-TYPE
SYNTAX GlobalStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId }
::= { globalStatusTable 1 }
GlobalStatusEntry ::=
SEQUENCE {
role AdicControllerRole,
status AdicAgentStatus,
systemDateAndTime AdicDateAndTime,
networkTimeServer1 IpAddress,
networkTimeProtocol INTEGER,
networkTimeEnable AdicEnable,
managementMibVersion AdicMibVersion,
enableDaylightSavingsTime AdicEnable,
networkTimeServer2 IpAddress
-- CHP networkTimeServer3 IpAddress
}
--
-- Begin definitions
--
role OBJECT-TYPE
SYNTAX AdicControllerRole
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The role of this Main Controller Blade (MCB) in the management hierarchy."
::= { globalStatusEntry 1 }
status OBJECT-TYPE
SYNTAX AdicAgentStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of this MCB."
::= { globalStatusEntry 2 }
systemDateAndTime OBJECT-TYPE
SYNTAX AdicDateAndTime
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Current time as set on system realtime
clock. Also allows system realtime clock
to be set."
::= { globalStatusEntry 3 }
networkTimeServer1 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP address of the time server to be used."
::= { globalStatusEntry 4 }
networkTimeProtocol OBJECT-TYPE
SYNTAX INTEGER { ntp(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Protocol to use when with network time server."
::= { globalStatusEntry 5 }
networkTimeEnable OBJECT-TYPE
SYNTAX AdicEnable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disabled the use of a network time server."
::= { globalStatusEntry 6 }
managementMibVersion OBJECT-TYPE
SYNTAX AdicMibVersion
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Version of the ADIC-MANAGEMENT-MIB on which this
agent is based."
::= { globalStatusEntry 7 }
enableDaylightSavingsTime OBJECT-TYPE
SYNTAX AdicEnable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable automatic adjustment of the system date
and time for daylight savings time."
::= { globalStatusEntry 8 }
networkTimeServer2 OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP address of the second time server to be used.
Multiple time servers may be used for redundancy
and (or) improved time accuracy.Two time servers are not recommended."
::= { globalStatusEntry 9 }
--CHP networkTimeServer3 OBJECT-TYPE
-- SYNTAX IpAddress
-- ACCESS read-write
-- STATUS mandatory
-- DESCRIPTION
-- "IP address of the third time server to be used.
-- Multiple time servers may be used for redundancy
-- and (or) improved time accuracy. Two time servers are not recommended."
-- ::= { globalStatusEntry 10 }
-- *****************************************************************
--
-- MCB Global Ethernet Manager Group
--
-- *****************************************************************
globalEthernetTable OBJECT-TYPE
SYNTAX SEQUENCE OF GlobalEthernetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides Ethernet setting/switch information. Routing tables
are part of MIB-II, so we don't include them here."
::= { globalEthernetManager 10 }
globalEthernetEntry OBJECT-TYPE
SYNTAX GlobalEthernetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId }
::= { globalEthernetTable 1 }
GlobalEthernetEntry ::=
SEQUENCE {
interfaceIndex INTEGER,
mcbHostName DisplayString,
ipAddress IpAddress,
dhcpStatus AdicEnable,
ipAddressSubnetMask IpAddress,
speedAutoNegotiation AdicEnable,
preferredSpeed AdicEthernetSpeed,
actualSpeed AdicEthernetSpeed,
ethernetDuplex INTEGER
}
--
-- Begin definitions
--
interfaceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies which Ethernet interface of the MCB"
::= { globalEthernetEntry 1 }
mcbHostName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Host name of this MCB."
::= { globalEthernetEntry 2 }
ipAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IP Address of this MCB's external Ethernet port."
::= { globalEthernetEntry 3 }
dhcpStatus OBJECT-TYPE
SYNTAX AdicEnable
ACCESS read-only
STATUS mandatory
DESCRIPTION
"State of DHCP support."
::= { globalEthernetEntry 4 }
ipAddressSubnetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Read-Write version of MIB-II ipAdEntNetMask Object.
** Description clause from MIB-II text **
The subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the hosts bits set to 0."
::= { globalEthernetEntry 5 }
speedAutoNegotiation OBJECT-TYPE
SYNTAX AdicEnable
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enables/disables automatic Ethernet speed negotiation."
::= { globalEthernetEntry 6 }
preferredSpeed OBJECT-TYPE
SYNTAX AdicEthernetSpeed
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The preferred Ethernet speed for this Ethernet port."
::= { globalEthernetEntry 7 }
actualSpeed OBJECT-TYPE
SYNTAX AdicEthernetSpeed
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual (negotiated) speed for this
Ethernet port."
::= { globalEthernetEntry 8 }
ethernetDuplex OBJECT-TYPE
SYNTAX INTEGER { half(1), full(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The duplex setting for this Ethernet port."
::= { globalEthernetEntry 9 }
-- *****************************************************************
--
-- MCB System Manager Group
--
-- *****************************************************************
systemManagerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SystemManagerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides system component/process management information."
::= { systemManager 10 }
systemManagerEntry OBJECT-TYPE
SYNTAX SystemManagerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, softwareComponentIndex }
::= { systemManagerTable 1 }
SystemManagerEntry ::=
SEQUENCE {
softwareComponentIndex INTEGER,
processRowStatus RowStatus,
processPhysicalMemory INTEGER,
processResidentMemory INTEGER
}
--
-- Begin definitions
--
softwareComponentIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the MCB software component/process index."
::= { systemManagerEntry 1 }
processRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Row status object for creating/deleting system components."
::= { systemManagerEntry 2 }
processPhysicalMemory OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size in kilobytes of the actual software
process binary."
::= { systemManagerEntry 3 }
processResidentMemory OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size in kilobytes of the software process
portion that is currently resident in memory."
::= { systemManagerEntry 4 }
-- *****************************************************************
--
-- Component Software Installation Table
--
-- *****************************************************************
softwareInstallationTable OBJECT-TYPE
SYNTAX SEQUENCE OF SoftwareInstallationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table controls installation of software packages/updates."
::= { systemManager 20 }
softwareInstallationEntry OBJECT-TYPE
SYNTAX SoftwareInstallationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId }
::= { softwareInstallationTable 1 }
SoftwareInstallationEntry ::=
SEQUENCE {
installPackageName DisplayString,
installProcessStatus INTEGER,
installCommand INTEGER,
installStatusText DisplayString,
currentFirmwareVersion DisplayString,
previousFirmwareVersion DisplayString,
downloadedFirmwareVersion DisplayString,
componentsInBundle INTEGER,
mcbInstallStatusText DisplayString,
cmbInstallStatusText DisplayString,
rcuInstallStatusText DisplayString,
fcbInstallStatusText DisplayString,
amcInstallStatusText DisplayString,
mcbInstallProcessStatus AdicInstallStatus,
cmbInstallProcessStatus AdicInstallStatus,
rcuInstallProcessStatus AdicInstallStatus,
fcbInstallProcessStatus AdicInstallStatus,
amcInstallProcessStatus AdicInstallStatus
}
--
-- Begin definitions
--
installPackageName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Filename and path of the package to be installed.
The management application writes the filename here,
which initiates the update process."
::= { softwareInstallationEntry 1 }
installProcessStatus OBJECT-TYPE
SYNTAX INTEGER { ok(1), inProgress(2), failed(3), updateAborted(4) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ok - installation successful - this is the intial state
inProgress - software package in being installed
failed - software package installation failed. The
status should return failed until another
write to installPackageFilename.
updateAborted - software installation was cancel and system
reverts back to previous version"
::= { softwareInstallationEntry 2 }
installCommand OBJECT-TYPE
SYNTAX INTEGER { download(1), install(2), abort(3), timeEstimate(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"download - copy firmware bundle to MCB but do not install
install - commence installation (could be current bundle or
previously downloaded bundle)
abort - abort installation in progress
rollback - rollback to the previous version of the system
identified by the value in the previousFirmwareVersion field.
timeEstimate - provides a estimate on the overall download time
for a previously downloaded bundle"
::= { softwareInstallationEntry 3 }
installStatusText OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..80))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates time to complete the entire installation:
example: Estimated time to complete download xx minutes"
::= { softwareInstallationEntry 4 }
currentFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current library firmware revision."
::= { softwareInstallationEntry 5 }
previousFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Previous library firmware revision available for rollback."
::= { softwareInstallationEntry 6 }
downloadedFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifier for a the bundle that was previously
downloaded to the library but is not installed."
::= { softwareInstallationEntry 7 }
componentsInBundle OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the components being installed with this bundle
**********************************************************
(LSB) bit 0 - MCB
bit 1 - CMB
bit 2 - RCU
bit 3 - FCB
bit 4 - AMC"
::= { softwareInstallationEntry 8}
mcbInstallStatusText OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Provides detailed information about the MCB component install
Example:
download status (inprogress, complete, failed, not being upgraded) : current component : time to complete MCB"
::= { softwareInstallationEntry 9 }
cmbInstallStatusText OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Provides detailed information about the CMB component install
Example:
download status (inprogress, complete, failed, not being upgraded) : current CMB : time to complete CMBs"
::= { softwareInstallationEntry 10 }
rcuInstallStatusText OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Provides detailed information about the RCU component install
Example:
download status (inprogress, complete, failed, not being upgraded) : current component : time to complete RCU"
::= { softwareInstallationEntry 11 }
fcbInstallStatusText OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Provides detailed information about the FCB component install
Example:
download status (inprogress, complete, failed, not being upgraded) : current fcb : time to complete FCBs"
::= { softwareInstallationEntry 12 }
amcInstallStatusText OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Provides detailed information about the AMC component install
Example:
download status (inprogress, complete, failed, not being upgraded) : current component : time to complete AMC"
::= { softwareInstallationEntry 13 }
mcbInstallProcessStatus OBJECT-TYPE
SYNTAX AdicInstallStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Provides detailed information about the MCB component install
Example:
download status (inprogress, complete, failed, not being upgraded) : current component : time to complete MCB"
::= { softwareInstallationEntry 14 }
cmbInstallProcessStatus OBJECT-TYPE
SYNTAX AdicInstallStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Provides detailed information about the CMB component install
Example:
download status (inprogress, complete, failed, not being upgraded) : current CMB : time to complete CMBs"
::= { softwareInstallationEntry 15 }
rcuInstallProcessStatus OBJECT-TYPE
SYNTAX AdicInstallStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Provides detailed information about the RCU component install
Example:
download status (inprogress, complete, failed, not being upgraded) : current component : time to complete RCU"
::= { softwareInstallationEntry 16 }
fcbInstallProcessStatus OBJECT-TYPE
SYNTAX AdicInstallStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Provides detailed information about the FCB component install
Example:
download status (inprogress, complete, failed, not being upgraded) : current fcb : time to complete FCBs"
::= { softwareInstallationEntry 17 }
amcInstallProcessStatus OBJECT-TYPE
SYNTAX AdicInstallStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Provides detailed information about the AMC component install
Example:
download status (inprogress, complete, failed, not being upgraded) : current component : time to complete AMC"
::= { softwareInstallationEntry 18 }
-- *****************************************************************
--
-- MCB Persistent Data Group
--
-- *****************************************************************
persistentDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF PersistentDataEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides non-volatile controller memory information."
::= { persistentData 10 }
persistentDataEntry OBJECT-TYPE
SYNTAX PersistentDataEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId }
::= { persistentDataTable 1 }
PersistentDataEntry ::=
SEQUENCE {
capacity INTEGER,
freeSpace INTEGER
}
--
-- Begin definitions
--
capacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of kilobytes of file space on this MCB."
::= { persistentDataEntry 1 }
freeSpace OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of kilobytes of available (unused) file space on this MCB."
::= { persistentDataEntry 2 }
-- *****************************************************************
--
-- MCB Security Group
--
-- *****************************************************************
-- *****************************************************************
--
-- MCB User Table
--
-- *****************************************************************
userTable OBJECT-TYPE
SYNTAX SEQUENCE OF UserEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"** This table is obsolete. **"
::= { security 20 }
userEntry OBJECT-TYPE
SYNTAX UserEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"** This entry object is obsolete. **"
INDEX { componentId, userName }
::= { userTable 1 }
UserEntry ::=
SEQUENCE {
userName DisplayString,
userRowStatus RowStatus,
userGroup DisplayString,
userPassword DisplayString,
userLibAccessList DisplayString
}
userName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..80))
ACCESS read-write
STATUS obsolete
DESCRIPTION
"** This object is obsolete. **
User's name."
::= { userEntry 1 }
userRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS obsolete
DESCRIPTION
"** This object is obsolete. **
Standard Row Status object. Used primarily to
delete users."
::= { userEntry 2 }
userGroup OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS obsolete
DESCRIPTION
"** This object is obsolete. **
User's group."
::= { userEntry 3 }
userPassword OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS obsolete
DESCRIPTION
"** This object is obsolete. **
User's password."
::= { userEntry 4 }
userLibAccessList OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS obsolete
DESCRIPTION
"** This object is obsolete. **
Delimited list of logical library identifiers
to which this use has access."
::= { userEntry 5 }
--
-- Begin definitions
--
-- *****************************************************************
--
-- MCB Licensing Group
--
-- *****************************************************************
-- *****************************************************************
--
-- MCB License Key Table
--
-- A list of license keys in the license database. Includes
-- a row status object to create/destroy entries in the database.
--
-- *****************************************************************
licenseKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF LicenseKeyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides licensed library feature information."
::= { licensing 10 }
licenseKeyEntry OBJECT-TYPE
SYNTAX LicenseKeyEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, licenseKeyIndex }
::= { licenseKeyTable 1 }
LicenseKeyEntry ::=
SEQUENCE {
licenseKeyIndex INTEGER,
licenseKeyRowStatus RowStatus,
key DisplayString,
licenseKeyDuration INTEGER,
licenseKeyExpirationDate AdicDateAndTime,
licenseKeyAppliedDate AdicDateAndTime
}
--
-- Begin definitions
--
licenseKeyIndex OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ordinal index for this table.
Identifies a license key database entry.
Each key may enable multiple features. A
list of features enabled by each key can be
found in the licenseFeatureTable."
::= { licenseKeyEntry 1 }
licenseKeyRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls creation/deletion of rows in the
license key database."
::= { licenseKeyEntry 2 }
key OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The license key string."
::= { licenseKeyEntry 3 }
licenseKeyDuration OBJECT-TYPE
SYNTAX INTEGER { permanent(1), transient(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"indication of permanent or temporary license key.
Permanent keys have no expiration date, transient keys
expire at the time found in the licenseKeyExpirationDate object."
::= { licenseKeyEntry 4 }
licenseKeyExpirationDate OBJECT-TYPE
SYNTAX AdicDateAndTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Exact date and time when this license
key expires. Has no meaning if license
key is permanent."
::= { licenseKeyEntry 5 }
licenseKeyAppliedDate OBJECT-TYPE
SYNTAX AdicDateAndTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Date and time when the license key
was applied. This field indicates the
chronological order in which the keys
were applied. If multiple keys enable
the same feature, the most recent key
supercedes older keys."
::= { licenseKeyEntry 6 }
-- *****************************************************************
--
-- MCB License Feature Table
--
-- A list of features which each key enables
--
-- *****************************************************************
licenseFeatureTable OBJECT-TYPE
SYNTAX SEQUENCE OF LicenseFeatureEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides a list of all features
activated by a particular license key."
::= { licensing 20 }
licenseFeatureEntry OBJECT-TYPE
SYNTAX LicenseFeatureEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, licenseKeyIndex, licenseFeatureIndex }
::= { licenseFeatureTable 1 }
LicenseFeatureEntry ::=
SEQUENCE {
licenseFeatureIndex INTEGER,
featureName DisplayString,
licenseFeatureQuantity INTEGER
}
--
-- Begin definitions
--
licenseFeatureIndex OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Feature index for this table, as well as
licensable feature table. If a feature is
not licensed, the row corresponding to that
feature does not appear here, but it does
appear in the licensableFeatureTable, as do
all licensableFeatures."
::= { licenseFeatureEntry 1 }
featureName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Name of the ADIC licensed feature enable
by this row's license key. The key is
specified by the value of licenseKeyIndex."
::= { licenseFeatureEntry 2 }
licenseFeatureQuantity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The quantity of this licensed feature
enabled by this license key, if applicable.
For example, a license key which enables 1000 slots
of Capacity-on-Demand storage would have
quantity = 1000. For features which are not
licensed by quantity, return 0."
::= { licenseFeatureEntry 3 }
-- *****************************************************************
--
-- MCB Licensable Feature Table
--
-- A list of ALL licensable features
-- Defines the mapping of licenseFatureIndex to feature name
--
-- *****************************************************************
licensableFeatureTable OBJECT-TYPE
SYNTAX SEQUENCE OF LicensableFeatureEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is a list of all licensable features.
It defines the mapping between a feature name
and its licenseFeatureIndex."
::= { licensing 30 }
licensableFeatureEntry OBJECT-TYPE
SYNTAX LicensableFeatureEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, licenseFeatureIndex }
::= { licensableFeatureTable 1 }
LicensableFeatureEntry ::=
SEQUENCE {
licensableFeatureName DisplayString,
totalQuantityLicensed INTEGER
}
--
-- Begin definitions
--
licensableFeatureName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Name of the ADIC licensable feature to be
displayed to the user."
::= { licensableFeatureEntry 1 }
totalQuantityLicensed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total licensed quantity for this feature.
For features which are licensed by quantity,
this object returns the sum of the indiviual
quantities enabled by each license key (see
licenseFeatureQuantity). For example, if
there were two COD license keys installed, one
for 500 slots and one for 1000 slots,
totalQuantityLicensed would return 1500."
::= { licensableFeatureEntry 2 }
-- *****************************************************************
--
-- MCB Event Manager Group
--
-- *****************************************************************
-- *****************************************************************
--
-- Notification (trap) Registration Table
--
-- *****************************************************************
registrationTable OBJECT-TYPE
SYNTAX SEQUENCE OF RegistrationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides TRAP registration configuration information."
::= { eventManager 10 }
registrationEntry OBJECT-TYPE
SYNTAX RegistrationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, registrationIndex }
::= { registrationTable 1 }
RegistrationEntry ::=
SEQUENCE {
registrationIndex INTEGER,
hostCommunity OCTET STRING,
hostTDomain OBJECT IDENTIFIER,
hostTAddress OCTET STRING,
hostFilter INTEGER,
registrationRowStatus RowStatus
}
--
-- Begin definitions
--
registrationIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Index of this trap registration."
::= { registrationEntry 1 }
hostCommunity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the community string
used when formatting trap."
::= { registrationEntry 2 }
hostTDomain OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates transport type of the address
defined in the next field."
::= { registrationEntry 3 }
hostTAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Host IP address and port to which SNMP traps
will be sent/forwarded."
::= { registrationEntry 4 }
hostFilter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates trap filtering. The only value
used is 4111 (0x100f) indicating that
hostTAddress is a DNS host name and all traps."
::= { registrationEntry 5 }
registrationRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls creation/deletion of rows in the
notification (trap registration) table."
::= { registrationEntry 6 }
-- *****************************************************************
--
-- Event Log Table
--
-- *****************************************************************
logTable OBJECT-TYPE
SYNTAX SEQUENCE OF LogEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"** This table is optional **
Management functionality for general
event logging. Log entries are not
necessarily available via SNMP."
::= { eventManager 20 }
logEntry OBJECT-TYPE
SYNTAX LogEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"** This entry object is optional **"
INDEX { componentId, logName }
::= { logTable 1 }
LogEntry ::= SEQUENCE { logName DisplayString }
--
-- Begin definitions
--
logName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS optional
DESCRIPTION
"** This object is optional. **
Name of the log to be accessed."
::= { logEntry 1 }
-- *****************************************************************
--
-- Log Snapshot Table
--
-- *****************************************************************
logSnapshotTable OBJECT-TYPE
SYNTAX SEQUENCE OF LogSnapshotEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"** This table is optional. **
Management functionality for generating
a snapshot archive containing all of the
system logs"
::= { eventManager 30 }
logSnapshotEntry OBJECT-TYPE
SYNTAX LogSnapshotEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"** This entry object is optional. **"
INDEX { componentId }
::= { logSnapshotTable 1 }
LogSnapshotEntry ::= SEQUENCE { logSnapshotCommand INTEGER }
--
-- Begin definitions
--
logSnapshotCommand OBJECT-TYPE
SYNTAX INTEGER { retrieveLogs(1) }
ACCESS read-write
STATUS optional
DESCRIPTION
"** This object is optional. **
Commands are:
**********************
retrieveLogs - Gather snapshots of various
system logs in preparation to
build snapshot archive file."
::= { logSnapshotEntry 1 }
-- *****************************************************************
--
-- MCB Physical Library Group
--
-- *****************************************************************
phGeneralInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhGeneralInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides library configuration and settings information."
::= { physicalLibrary 10 }
phGeneralInfoEntry OBJECT-TYPE
SYNTAX PhGeneralInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId }
::= { phGeneralInfoTable 1 }
PhGeneralInfoEntry ::=
SEQUENCE {
numElementDomains INTEGER,
numPhSlots INTEGER,
numPhIESlots INTEGER,
numPhDrives INTEGER,
onlineStatus AdicOnlineStatus,
readiness INTEGER,
autoInventoryMode AdicEnable,
autoCalibrateMode AdicEnable,
autoConfigureMode AdicEnable,
numPhAisles INTEGER,
operatingMode INTEGER,
numStorageCartridges INTEGER,
numCleaningCartridges INTEGER,
physLibraryManagerLun INTEGER,
physLibraryAutoCleaning AdicEnable,
physLibraryDoorStatus AdicDoorStatus,
numPhFrames INTEGER,
totalRawCapacity INTEGER,
totalFreeCapacity INTEGER,
totalUsedCapacity INTEGER,
logicalSNAdressingMode AdicEnable,
usedNumPhSlots INTEGER,
numCODSlots INTEGER,
usedNumCODSlots INTEGER
}
--
-- Begin library scalars definitions
--
numElementDomains OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of element domains (such as DLT, LTO, etc.)
currently installed in this physical library."
::= { phGeneralInfoEntry 1 }
numPhSlots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of installed storage slots."
::= { phGeneralInfoEntry 2 }
numPhIESlots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of installed import/export slots."
::= { phGeneralInfoEntry 3 }
numPhDrives OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of installed drives."
::= { phGeneralInfoEntry 4 }
onlineStatus OBJECT-TYPE
SYNTAX AdicOnlineStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Library mode: onlne or offline."
::= { phGeneralInfoEntry 5 }
readiness OBJECT-TYPE
SYNTAX INTEGER { ready(1), notReady(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Library state: ready or not ready."
::= { phGeneralInfoEntry 6 }
autoInventoryMode OBJECT-TYPE
SYNTAX AdicEnable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Library auto-inventory setting: ON or OFF."
::= { phGeneralInfoEntry 7 }
autoCalibrateMode OBJECT-TYPE
SYNTAX AdicEnable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Library auto-calibration setting: ON or OFF."
::= { phGeneralInfoEntry 8 }
autoConfigureMode OBJECT-TYPE
SYNTAX AdicEnable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Library auto-configuration setting: ON or OFF."
::= { phGeneralInfoEntry 9 }
numPhAisles OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of aisles in this library."
::= { phGeneralInfoEntry 10 }
operatingMode OBJECT-TYPE
SYNTAX INTEGER { normal(1), delay(2), unload(3),
delayAndUnload(4), noUnload(5) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drive unload control: Controls library behavior when retrieving
tape from drives."
::= { phGeneralInfoEntry 11 }
numStorageCartridges OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of storage cartridges present in the library"
::= { phGeneralInfoEntry 12 }
numCleaningCartridges OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of cleaning cartridges present in the library"
::= { phGeneralInfoEntry 13 }
physLibraryManagerLun OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The SCSI logical unit number of the Physical Library Manager."
::= { phGeneralInfoEntry 14 }
physLibraryAutoCleaning OBJECT-TYPE
SYNTAX AdicEnable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable automatic drive cleaning for
the entire physical library."
::= { phGeneralInfoEntry 15 }
physLibraryDoorStatus OBJECT-TYPE
SYNTAX AdicDoorStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Main library access door status: (open/closed,locked/unlocked)."
::= { phGeneralInfoEntry 16 }
numPhFrames OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of physical frames in the library."
::= { phGeneralInfoEntry 17 }
totalRawCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An estimate of the amount of data which the
library can hold. Units are in GigaBytes. May
be computed by multiplying the number of cells
by the maximum number of GigaBytes per tape."
::= { phGeneralInfoEntry 18 }
totalFreeCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An estimate of the unused data capacity of the
library. Units are in GigaBytes. May be computed
by multiplying the number of empty cells
by the maximum number of GigaBytes per tape."
::= { phGeneralInfoEntry 19 }
totalUsedCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An estimate of the used data capacity of the
library. Units are in GigaBytes. May be computed
by multiplying the number of full cells
by the maximum number of GigaBytes per tape."
::= { phGeneralInfoEntry 20 }
logicalSNAdressingMode OBJECT-TYPE
SYNTAX AdicEnable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enables/disables drive assigned logical serial number
addressing."
::= { phGeneralInfoEntry 21 }
usedNumPhSlots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of assigned/configured storage slots."
::= { phGeneralInfoEntry 22 }
numCODSlots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of total COD licensed storage slots."
::= { phGeneralInfoEntry 23 }
usedNumCODSlots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of used/configured COD licensed storage slots."
::= { phGeneralInfoEntry 24 }
--
-- End library scalars definitions
--
-- *****************************************************************
--
-- Physical Library Media Domain Table
--
-- *****************************************************************
mediaDomainTable OBJECT-TYPE
SYNTAX SEQUENCE OF MediaDomainEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides a list of media domains installed in
the library."
::= { physicalLibrary 20 }
mediaDomainEntry OBJECT-TYPE
SYNTAX MediaDomainEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, mediaDomainIndex }
::= { mediaDomainTable 1 }
MediaDomainEntry ::=
SEQUENCE {
mediaDomainIndex INTEGER,
mediaDomainName DisplayString,
numStorageElements INTEGER,
numIeElements INTEGER,
numCleaningSlots INTEGER
}
--
-- Begin media domain definitions
--
mediaDomainIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index associated with the media domain."
::= { mediaDomainEntry 1 }
mediaDomainName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The media domain name."
::= { mediaDomainEntry 2 }
numStorageElements OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of storage elements for this
media domain in this physical library."
::= { mediaDomainEntry 3 }
numIeElements OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of import/export elements for this
media domain in this physical library."
::= { mediaDomainEntry 4 }
numCleaningSlots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Returns the number of storage slots reserved for
cleaning media of this domain. When set, the
value is the total number of slots to reserve
for cleaning media of this domain. The library
will reserve a set of storage segments such
that total number of storage slots is greater
than or equal to numCleaningSlots."
::= { mediaDomainEntry 5 }
--
-- End media domain definitions
--
-- *****************************************************************
--
-- Physical Library Media Type Table
--
-- *****************************************************************
mediaTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF MediaTypeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides media type supprot information."
::= { physicalLibrary 30 }
mediaTypeEntry OBJECT-TYPE
SYNTAX MediaTypeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, mediaDomainIndex, mediaTypeIndex }
::= { mediaTypeTable 1 }
MediaTypeEntry ::=
SEQUENCE {
mediaTypeIndex INTEGER,
mediaTypeName DisplayString,
numDriveElements INTEGER
}
--
-- Begin media type definitions
--
mediaTypeIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index associated with the media type."
::= { mediaTypeEntry 1 }
mediaTypeName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The media type name."
::= { mediaTypeEntry 2 }
numDriveElements OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of drives supporting this media type."
::= { mediaTypeEntry 3 }
--
-- End media type definitions
--
-- *****************************************************************
--
-- Physical Library Segement Table
--
-- This is a list of all the segments in the library
--
-- *****************************************************************
phSegmentTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhSegmentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is a list of all the segments in the library."
::= { physicalLibrary 55 }
phSegmentEntry OBJECT-TYPE
SYNTAX PhSegmentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, phSegmentType, phSegmentAisle, phSegmentFrame, phSegmentRack,
phSegmentSection, phSegmentCol, phSegmentStartingRow }
::= { phSegmentTable 1 }
PhSegmentEntry ::=
SEQUENCE {
phSegmentAisle INTEGER, -- Physical aisle coordinate of segment
phSegmentFrame INTEGER, -- Physical frame coordinate of segment
phSegmentRack INTEGER, -- Physical rack coordinate of segment
phSegmentSection INTEGER, -- Physical section coordinate of segment
phSegmentCol INTEGER, -- Physical column coordinate of segment
phSegmentStartingRow INTEGER, -- Within a column, row number where this segment begins
-- Added so that we can have more than one segment per column
phSegmentSize INTEGER,
phSegmentType AdicSegmentType, -- Storage, I/E, or Drive segment
phSegmentMediaDomain INTEGER, -- Element media domain of segment (media domain table index)
phSegmentStatus INTEGER,
phSegmentCodStatus INTEGER,
phSegStartingAddress INTEGER
}
--
-- Begin Physical Library Segment definitions
--
phSegmentAisle OBJECT-TYPE
SYNTAX INTEGER (0..1)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Aisle coordinate value for this segment."
::= { phSegmentEntry 1 }
phSegmentFrame OBJECT-TYPE
SYNTAX INTEGER (0..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Frame coordinate value for this segment."
::= { phSegmentEntry 2 }
phSegmentRack OBJECT-TYPE
SYNTAX INTEGER (0..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Rack coordinate value for this segment."
::= { phSegmentEntry 3 }
phSegmentSection OBJECT-TYPE
SYNTAX INTEGER (0..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Section coordinate for this segment."
::= { phSegmentEntry 4 }
phSegmentCol OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Column coordinate value for this segment."
::= { phSegmentEntry 5 }
phSegmentStartingRow OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Row coordinate of the first element in this segment.
This is useful to divide a column into multiple
segments. For instance, a segment which contains
rows 1 - 10 would have phSegmentStartingRow = 1. A
segment which contains rows 11 - 20 in the same
column would have phSegmentStartingRow = 11."
::= { phSegmentEntry 6 }
phSegmentSize OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of elements in this segment."
::= { phSegmentEntry 7 }
phSegmentType OBJECT-TYPE
SYNTAX AdicSegmentType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This segment's type (storage, drive, I/E, etc.)."
::= { phSegmentEntry 8 }
phSegmentMediaDomain OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Element domain of this segment.
Points a row in the media domain table."
::= { phSegmentEntry 9 }
phSegmentStatus OBJECT-TYPE
SYNTAX INTEGER { installed(1), notInstalled(2), reservedForCleaning(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of this segment. May be installed,
not installed, or reserved for use by the
automatic cleaning service."
::= { phSegmentEntry 10 }
phSegmentCodStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2), noCod(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Capacity on Demand (COD) status for this
segment. noCod means that COD is not applied to this segment."
::= { phSegmentEntry 11 }
phSegStartingAddress OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SCSI media changer element address of the first
row in this segment. Element addresses are
contiguous, so we can derive the address of
each row in the segment from the address of
the first row."
::= { phSegmentEntry 12 }
-- *****************************************************************
--
-- Physical Library Storage Segement Table
--
-- This is a list of all the storage segments in the library
--
-- *****************************************************************
phStorageSegTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhStorageSegEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is a list of all the storage segments in the library, indexed by
their media domain and segment Index."
::= { physicalLibrary 60 }
phStorageSegEntry OBJECT-TYPE
SYNTAX PhStorageSegEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, mediaDomainIndex,
phSegmentAisle , phSegmentFrame, phSegmentRack,
phSegmentSection, phSegmentCol, phSegmentStartingRow }
::= { phStorageSegTable 1 }
PhStorageSegEntry ::=
SEQUENCE {
phStorageSegSize INTEGER
}
--
-- Begin Physical Library Segment definitions
--
phStorageSegSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of elements in this storage segment."
::= { phStorageSegEntry 1 }
-- *****************************************************************
--
-- Physical Library I/E Segement Table
--
-- This is a list of all the storage segments in the library
--
-- *****************************************************************
phIeSegTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhIeSegEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"** Some objects in this table are optional **
This table provides a list of all the I/E segments in the library, indexed by
their media domain and segment index."
::= { physicalLibrary 70 }
phIeSegEntry OBJECT-TYPE
SYNTAX PhIeSegEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"** Some objects in this entry are optional **"
INDEX { componentId, mediaDomainIndex,
phSegmentAisle , phSegmentFrame, phSegmentRack,
phSegmentSection, phSegmentCol, phSegmentStartingRow }
::= { phIeSegTable 1 }
PhIeSegEntry ::=
SEQUENCE {
phIeSegSize INTEGER,
phIeSegReserve INTEGER,
phIeSegReservedBy INTEGER,
phIeSegOnlineStatus INTEGER,
phIeSegCommand INTEGER
}
--
-- Begin Physical Library Segment definitions
--
phIeSegSize OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS optional
DESCRIPTION
"Number of IE elements in this segment."
::= { phIeSegEntry 1 }
phIeSegReserve OBJECT-TYPE
SYNTAX INTEGER { reserve(1), release(2) }
ACCESS read-write
STATUS optional
DESCRIPTION
"** This object is optional **
Mechanism to release and reserve this
I/E segment."
::= { phIeSegEntry 2 }
phIeSegReservedBy OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS optional
DESCRIPTION
"** This object is optional **
Indicator of who reserved this I/E segment."
::= { phIeSegEntry 3 }
phIeSegOnlineStatus OBJECT-TYPE
SYNTAX INTEGER { online(1), offline(2) }
ACCESS read-write
STATUS optional
DESCRIPTION
"** This object is optional **
Indication whether I/E segment is online/offline."
::= { phIeSegEntry 4 }
phIeSegCommand OBJECT-TYPE
SYNTAX INTEGER { import(1) }
ACCESS read-write
STATUS optional
DESCRIPTION
"** This object is optional **
Supporetd command list for this I/E station segment."
::= { phIeSegEntry 5 }
-- *****************************************************************
--
-- Physical Library I/E Station Table
--
-- This is a list of all the I/E Stations in the library
--
-- *****************************************************************
phIeStationTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhIeStationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides a list of all the I/E stations in the library"
::= { physicalLibrary 75 }
phIeStationEntry OBJECT-TYPE
SYNTAX PhIeStationEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, phSegmentAisle, phSegmentFrame, phSegmentRack, phIeStationNumber }
::= { phIeStationTable 1 }
PhIeStationEntry ::=
SEQUENCE {
phIeStationNumber INTEGER,
phIeStationDoorStatus AdicDoorStatus,
phIeStationREDId AdicREDIdentifier
}
--
-- Begin Physical Library Segment definitions
--
phIeStationNumber OBJECT-TYPE
SYNTAX INTEGER (0..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of I/E station within a frame.
If a frame has N I/E stations, the
range of phIeStationNumber is
1 through N."
::= { phIeStationEntry 1 }
phIeStationDoorStatus OBJECT-TYPE
SYNTAX AdicDoorStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Is the station door open/closed, locked/unlocked ?"
::= { phIeStationEntry 2 }
phIeStationREDId OBJECT-TYPE
SYNTAX AdicREDIdentifier
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Runtime Error Detection identifier for this
import/export station."
::= { phIeStationEntry 3 }
-- *****************************************************************
--
-- Physical Library Drive Segement Table
--
-- This is a list of all the storage segments in the library
--
-- *****************************************************************
phDriveSegTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhDriveSegEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides a list of all the drive segments in the library, indexed by
their media domain, media type and segment index."
::= { physicalLibrary 80 }
phDriveSegEntry OBJECT-TYPE
SYNTAX PhDriveSegEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, mediaDomainIndex, mediaTypeIndex,
phSegmentAisle , phSegmentFrame, phSegmentRack,
phSegmentSection, phSegmentCol, phSegmentStartingRow }
::= { phDriveSegTable 1 }
PhDriveSegEntry ::=
SEQUENCE {
phDriveSegSize INTEGER,
phDriveSegMediaType INTEGER, -- Element media type of segment (media type table index)
phDriveSegInterfaceType AdicInterfaceType -- Element data transfer interface type of segment
}
--
-- Begin Physical Library Segment definitions
--
phDriveSegSize OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of drive elements in this segment."
::= { phDriveSegEntry 1 }
phDriveSegMediaType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Exact media type of this segment.
With phSegmentMediaDomain, points a
row in the media type table."
::= { phDriveSegEntry 2 }
phDriveSegInterfaceType OBJECT-TYPE
SYNTAX AdicInterfaceType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive interface type of this drive segment. "
::= { phDriveSegEntry 3 }
-- *****************************************************************
--
-- Physical Library Cleaning Segement Table
--
-- This is a list of all storage segments in the library reserved for
-- automatic cleaning media
--
-- *****************************************************************
phCleaningSegTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhCleaningSegEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"** This table is optional **
This table provides a list of all the storage segments in the library
which have been reserved for use by automatic cleaning services."
::= { physicalLibrary 85 }
phCleaningSegEntry OBJECT-TYPE
SYNTAX PhCleaningSegEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"** This entry object is optional **"
INDEX { componentId, mediaDomainIndex,
phSegmentAisle , phSegmentFrame, phSegmentRack,
phSegmentSection, phSegmentCol, phSegmentStartingRow }
::= { phCleaningSegTable 1 }
PhCleaningSegEntry ::=
SEQUENCE {
phCleaningSegSize INTEGER,
phCleaningSegRowStatus RowStatus
}
--
-- Begin Physical Library Segment definitions
--
phCleaningSegSize OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS optional
DESCRIPTION
"** This object is optional **
Number of elements in this segment."
::= { phCleaningSegEntry 1 }
phCleaningSegRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS optional
DESCRIPTION
"** This object is optional **
Management application use this object to
to reserve segment for cleaning or release
the segment for use as storage."
::= { phCleaningSegEntry 2 }
-- *****************************************************************
--
-- Physical Library Storage Slot Table
--
-- *****************************************************************
phStorageSlotTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhStorageSlotEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"** This table is optional **"
::= { physicalLibrary 90 }
phStorageSlotEntry OBJECT-TYPE
SYNTAX PhStorageSlotEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"** This entry object is optional **"
INDEX { componentId, mediaDomainIndex,
phSegmentAisle , phSegmentFrame, phSegmentRack,
phSegmentSection, phSegmentCol, phStorageRow }
::= { phStorageSlotTable 1 }
PhStorageSlotEntry ::=
SEQUENCE {
phStorageRow INTEGER,
phStorageElementAddr INTEGER
}
--
-- Begin Physical Storage Slot definitions
--
phStorageRow OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS optional
DESCRIPTION
"** This object is optional **
Row coordinate value for this storage slot."
::= { phStorageSlotEntry 1 }
phStorageElementAddr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"** This object is optional **
SCSI Medium Changer Element Address for this storage slot."
::= { phStorageSlotEntry 2 }
--
-- End Physical Storage Slot definitions
--
-- *****************************************************************
--
-- Physical Library I/E Slot Table
--
-- *****************************************************************
phIeSlotTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhIeSlotEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"** This table is optional **"
::= { physicalLibrary 100 }
phIeSlotEntry OBJECT-TYPE
SYNTAX PhIeSlotEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"** This entry object is optional **"
INDEX { componentId, mediaDomainIndex,
phSegmentAisle , phSegmentFrame, phSegmentRack,
phSegmentSection, phSegmentCol, phIeRow }
::= { phIeSlotTable 1 }
PhIeSlotEntry ::=
SEQUENCE {
phIeRow INTEGER,
phIeElementAddr INTEGER,
phIeMediaPresent INTEGER,
phIeMediaId AdicBarCode
}
--
-- Begin Physical I/E Slot definitions
--
phIeRow OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS optional
DESCRIPTION
"** This object is optional **
Row coordinate value for this I/E slot"
::= { phIeSlotEntry 1 }
phIeElementAddr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"** This object is optional **
SCSI Medium Changer Element Address for this I/E slot."
::= { phIeSlotEntry 2 }
phIeMediaPresent OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2), error(3) }
ACCESS read-only
STATUS optional
DESCRIPTION
"** This object is optional **
Is a media cartridge present in this slot? Values are:
yes(1) - system is certain that a cartridge is present.
no(2) - system is certain that a cartridge is not present.
error(3) - an error ocurred while determining if media is
present.
"
::= { phIeSlotEntry 3 }
phIeMediaId OBJECT-TYPE
SYNTAX AdicBarCode
ACCESS read-only
STATUS optional
DESCRIPTION
"** This object is optional **
Media ID bar code of cartridge in this I/E
slot, if present and available. Returns
zero length string if the bar code is not
available for any reason."
::= { phIeSlotEntry 4 }
--
-- End Physical I/E Slot definitions
--
-- *****************************************************************
--
-- Physical Library Tower Table
--
-- *****************************************************************
phTowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhTowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides tower status information."
::= { physicalLibrary 65 }
phTowerEntry OBJECT-TYPE
SYNTAX PhTowerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, phSegmentAisle, phSegmentFrame, phSegmentRack, phTowerNumber }
::= { phTowerTable 1 }
--
-- Begin Physical Library Tower definitions
--
PhTowerEntry ::=
SEQUENCE {
phTowerNumber INTEGER,
phTowerStatus AdicTowerStatus,
phTowerREDId AdicREDIdentifier
}
phTowerNumber OBJECT-TYPE
SYNTAX INTEGER (0..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of tower within a frame."
::= { phTowerEntry 1 }
phTowerStatus OBJECT-TYPE
SYNTAX AdicTowerStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tower door status: open/closed, varied on/off."
::= { phTowerEntry 2 }
phTowerREDId OBJECT-TYPE
SYNTAX AdicREDIdentifier
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Runtime Error Detection identifier for this tower."
::= { phTowerEntry 3 }
-- *****************************************************************
--
-- Physical Library Drive Table
--
-- *****************************************************************
phDriveTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhDriveEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides drive configuration and status information."
::= { physicalLibrary 110 }
phDriveEntry OBJECT-TYPE
SYNTAX PhDriveEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, mediaDomainIndex, mediaTypeIndex,
phSegmentAisle, phSegmentFrame, phSegmentRack,
phSegmentSection, phSegmentCol, phDriveRow }
::= { phDriveTable 1 }
PhDriveEntry ::=
SEQUENCE {
phDriveRow INTEGER,
phDriveElementAddr INTEGER,
phDriveScsiId INTEGER,
phDriveScsiLun INTEGER,
phDriveWwn DisplayString,
phDriveVendor DisplayString,
phDriveProduct DisplayString,
phDriveSerialNumber DisplayString,
phDriveNeedsCleaning INTEGER,
phDriveAutoCleaning Boolean,
phDriveInterfaceType AdicInterfaceType,
phDriveFcLoopId INTEGER,
phDriveFcLoopIdMode INTEGER,
phDriveFcHardId INTEGER,
phDriveStatus AdicDriveStatus,
phDriveCommand INTEGER,
phDriveFcPortId INTEGER,
phDriveCompressionOn Boolean,
phDriveWriteProtected Boolean,
phDriveNumLoads INTEGER,
phDriveNumCleans INTEGER,
phDrivePowerStatus INTEGER,
phDriveReadErrors INTEGER,
phDriveWriteErrors INTEGER,
phDriveMbytesRead INTEGER,
phDriveMbytesWritten INTEGER,
phDriveFirmwareVersion DisplayString,
phDriveREDId AdicREDIdentifier,
phDriveOnlineStatus AdicOnlineStatus,
phDriveErrorCodeBytes OCTET STRING,
phDriveRasStatus AdicStatusGroupState,
phDriveWwPortName DisplayString,
phDriveIpAddress IpAddress,
phDriveVaryStatus AdicVaryStatus
}
--
-- Begin Physical Library Drive definitions
--
phDriveRow OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Row coordinate value for this drive element."
::= { phDriveEntry 1 }
phDriveElementAddr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Robotic controller reported SCSI Element Address for this drive element.
This is not the drive SCSI element address reported to a host."
::= { phDriveEntry 2 }
phDriveScsiId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"SCSI id for parallel SCSI drives."
::= { phDriveEntry 3 }
phDriveScsiLun OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Logical Unit Number (LUN) of FC drives (SSC device)."
::= { phDriveEntry 4 }
phDriveWwn OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fibre Channel drive World Wide Node Name (WWNN) or SAS Address for SAS drives."
::= { phDriveEntry 5 }
phDriveVendor OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive vendor name."
::= { phDriveEntry 6 }
phDriveProduct OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive product name."
::= { phDriveEntry 7 }
phDriveSerialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Physical (native) drive serial number."
::= { phDriveEntry 8 }
phDriveNeedsCleaning OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2), immediate(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drive cleaning need status."
::= { phDriveEntry 9 }
phDriveAutoCleaning OBJECT-TYPE
SYNTAX Boolean
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indication whether drive is configured for inclusion of automatic cleaning."
::= { phDriveEntry 10 }
phDriveInterfaceType OBJECT-TYPE
SYNTAX AdicInterfaceType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Data interface type (SCSI, Fibre Channel, SAS, etc.)."
::= { phDriveEntry 11 }
phDriveFcLoopId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Loop ID for Fibre Channel interface drives;
- undefined for other interface type drives."
::= { phDriveEntry 12 }
phDriveFcLoopIdMode OBJECT-TYPE
SYNTAX INTEGER { soft(1), hard(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Loop ID Mode for Fibre Channel interface drives;
- undefined for other interface type drives.
Controls negotiation of the port ID on the
Fibre Channel connection."
::= { phDriveEntry 13 }
phDriveFcHardId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Preferred port ID Mode for Fibre Channel
interface drives; - undefined for other interface
type drives. Used only when port ID mode is set to 'hard'."
::= { phDriveEntry 14 }
phDriveStatus OBJECT-TYPE
SYNTAX AdicDriveStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Drive presence and load status."
::= { phDriveEntry 15 }
phDriveCommand OBJECT-TYPE
SYNTAX INTEGER { varyOn(1), varyOff(2), reset(3), powerOn(4), powerOff(5),
powerCycle(6), tapeDriveFwUpdate(7), online(8), offline(9) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform various operations on a drive:
***************************************
varyOn(1) - vary on drive (tape drive powered on)
varyOff(2) - vary off drive (tape drive powered off)
reset(3) - perform a warm tape drive reset
powerOn(4) - perform tape drive power on
powerOff(5) - perform tape drive power off
powerCycle(6) - perform tape drive power cycle
tapeDriveFwUpdate(7) - download firmware to the tape drive
online(8) - take drive sled online
offline(9) - take drive sled offline"
::= { phDriveEntry 16 }
phDriveFcPortId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port ID for fabric attached Fibre Channel drives,
undefined for other interface type drives."
::= { phDriveEntry 17 }
phDriveCompressionOn OBJECT-TYPE
SYNTAX Boolean
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Drive compression state."
::= { phDriveEntry 18 }
phDriveWriteProtected OBJECT-TYPE
SYNTAX Boolean
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Current Write Protect status (if media present)."
::= { phDriveEntry 19 }
phDriveNumLoads OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Lifetime drive load count."
::= { phDriveEntry 20 }
phDriveNumCleans OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Lifetime drive cleaning operations."
::= { phDriveEntry 21 }
phDrivePowerStatus OBJECT-TYPE
SYNTAX INTEGER { poweredOn(1), poweredOff(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape drive power status."
::= { phDriveEntry 22 }
phDriveReadErrors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Lifetime drive read error count."
::= { phDriveEntry 23 }
phDriveWriteErrors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Lifetime drive write error count."
::= { phDriveEntry 24 }
phDriveMbytesRead OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Megabytes (MB) read from this drive."
::= { phDriveEntry 25 }
phDriveMbytesWritten OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Megabytes (MB)written to this drive."
::= { phDriveEntry 26 }
phDriveFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"tape drive firmware version."
::= { phDriveEntry 27 }
phDriveREDId OBJECT-TYPE
SYNTAX AdicREDIdentifier
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Runtime Error Detection identifier for this drive."
::= { phDriveEntry 28 }
phDriveOnlineStatus OBJECT-TYPE
SYNTAX AdicOnlineStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Returns either online(1) or offline(2). The
shutdown(3) state is not applicable to this
object."
::= { phDriveEntry 29 }
phDriveErrorCodeBytes OBJECT-TYPE
SYNTAX OCTET STRING ( SIZE( 1 ) )
ACCESS read-only
STATUS mandatory
DESCRIPTION
"String of bytes which contains error
information about the drive. The
meaning of each byte is as follows:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
byte 0: drive seven segment display code"
::= { phDriveEntry 30 }
phDriveRasStatus OBJECT-TYPE
SYNTAX AdicStatusGroupState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RAS status for this individual drive."
::= { phDriveEntry 31 }
phDriveWwPortName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"World Wide Port Name (WWPN) of the drive's first FC port."
::= { phDriveEntry 32 }
phDriveIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IP address of the of the drive."
::= { phDriveEntry 33 }
phDriveVaryStatus OBJECT-TYPE
SYNTAX AdicVaryStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Returns either variedOn(1) or variedOff(2), or inTransition(3)
in case a vary on or vary off is in progress."
::= { phDriveEntry 34 }
--
-- End Physical Library Drive definitions
--
-- *****************************************************************
--
-- Physical Library Drive Statistics Historical Data
--
-- *****************************************************************
phDriveStatHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhDriveStatHistoryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains historical data on drive
operations. Each row in the table gives various
statistical data for a single drive over a one hour
period. The table is indexed such that phHourIndex = 0
is the current hour's data, phHourIndex = 1 is one hour
ago, phHourIndex = 2 is two hours ago, etc."
::= { physicalLibrary 112 }
phDriveStatHistoryEntry OBJECT-TYPE
SYNTAX PhDriveStatHistoryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, mediaDomainIndex, mediaTypeIndex,
phSegmentAisle , phSegmentFrame, phSegmentRack,
phSegmentSection, phSegmentCol, phDriveRow, phHourIndex }
::= { phDriveStatHistoryTable 1 }
PhDriveStatHistoryEntry ::=
SEQUENCE {
phHourIndex INTEGER,
phHourlyMBytesRead INTEGER,
phHourlyMBytesWritten INTEGER,
phHourlyMounts INTEGER
}
--
-- Begin Drive Hourly Statistics
--
phHourIndex OBJECT-TYPE
SYNTAX INTEGER (0..24)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index into the historical data. The integer value
is the number in the past the data the data was collected.
For example, phHourIndex = 0 means the current hour's
statistics, phHourIndex = 1 means one hour in the past,
phHourIndex = 2 means two hours in the past."
::= { phDriveStatHistoryEntry 1 }
phHourlyMBytesRead OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of megabytes (MB) read by this drive during the
one hour period indicated by phHourIndex."
::= { phDriveStatHistoryEntry 2 }
phHourlyMBytesWritten OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of megabytes (MB) written by this drive during the
one hour period indicated by phHourIndex."
::= { phDriveStatHistoryEntry 3 }
phHourlyMounts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of mounts performed by this drive during the
one hour period indicated by phHourIndex."
::= { phDriveStatHistoryEntry 4 }
-- *****************************************************************
--
-- Physical Library Drive Port Group
--
-- A group of tables containing variables pertaining to
-- drive data ports (SCSI, FC, SAS, etc. )
--
-- *****************************************************************
phDrivePorts OBJECT IDENTIFIER ::= { physicalLibrary 116 }
-- *****************************************************************
--
-- Fibre Channel Port Table
--
-- *****************************************************************
fcDrivePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcDrivePortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains objects pertaining to
Fibre Channel port settings on native Fibre
Channel drives."
::= { phDrivePorts 10 }
fcDrivePortEntry OBJECT-TYPE
SYNTAX FcDrivePortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row object describing a Fibre Channel port."
INDEX { componentId, mediaDomainIndex, mediaTypeIndex,
phSegmentAisle , phSegmentFrame, phSegmentRack,
phSegmentSection, phSegmentCol, phDriveRow }
::= { fcDrivePortTable 1 }
FcDrivePortEntry ::=
SEQUENCE {
fcPortPreferredSpeed AdicFcPortSpeed,
fcPortNegotiatedSpeed AdicFcPortSpeed,
fcPortPreferredType AdicFcPortType,
fcPortNegotiatedType AdicFcPortType,
fcPortTypeQualifier INTEGER
}
--
-- Begin Fibre Channel Port Attributes
--
fcPortPreferredSpeed OBJECT-TYPE
SYNTAX AdicFcPortSpeed
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Preferred transmitter speed. Except for auto(1),
the numerical value of this object is equal to the
port speed in megabits per second.
*******************************************
auto(1) - speed is auto-negotiated with no preferred speed
megabits1000(1000) - 1000 megabits per second
megabits2000(2000) - 2000 megabits per second
megabits2000(4000) - 4000 megabits per second
megabits2000(8000) - 8000 megabits per second
megabits2000(16000) - 16000 megabits per second"
::= { fcDrivePortEntry 1 }
fcPortNegotiatedSpeed OBJECT-TYPE
SYNTAX AdicFcPortSpeed
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Actual transmitter speed as negotiated
on the FC network. The numerical value of
this object is equal to the port speed in
megabits per second. Although auto(1) is
defined in the AdicFcPortSpeed enumeration,
the fcPortNegotiatedSpeed should never return
this value.
*******************************************
megabits1000(1000) - 1000 megabits per second
megabits2000(2000) - 2000 megabits per second
megabits2000(4000) - 4000 megabits per second
megabits2000(8000) - 8000 megabits per second
megabits2000(16000) - 16000 megabits per second"
::= { fcDrivePortEntry 2 }
fcPortPreferredType OBJECT-TYPE
SYNTAX AdicFcPortType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Preferred port type, such as N_Port or NL_Port.
auto(1) means auto-negotiate (no preference)."
::= { fcDrivePortEntry 3 }
fcPortNegotiatedType OBJECT-TYPE
SYNTAX AdicFcPortType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Actual port type as negotiated on the FC network.
Should never return auto(1)."
::= { fcDrivePortEntry 4 }
fcPortTypeQualifier OBJECT-TYPE
SYNTAX INTEGER { public(1), private(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Public or private (library internal) port indicator."
::= { fcDrivePortEntry 5 }
--
-- End of Fibre Channel Port Attributes
--
-- *****************************************************************
--
-- Physical Library Media Table
--
-- *****************************************************************
phMediaTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhMediaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides media status information."
::= { physicalLibrary 120 }
phMediaEntry OBJECT-TYPE
SYNTAX PhMediaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, phMediaBarCode }
::= { phMediaTable 1 }
PhMediaEntry ::=
SEQUENCE {
phMediaBarCode AdicBarCode,
phMediaDomain INTEGER,
phMediaType INTEGER,
phMediaElementAddress INTEGER,
phMediaMounts INTEGER,
phMediaReadErrors INTEGER,
phMediaWriteErrors INTEGER,
phMediaCapacity INTEGER,
phMediaFreeSpace INTEGER,
phMediaExported Boolean,
phMediaImportTimestamp AdicDateAndTime,
phMediaExportTimestamp AdicDateAndTime
}
--
-- Begin Physical Library Drive definitions
--
phMediaBarCode OBJECT-TYPE
SYNTAX AdicBarCode
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape cartridge barcode label."
::= { phMediaEntry 1 }
phMediaDomain OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape cartridge domain."
::= { phMediaEntry 2 }
phMediaType OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Tape cartridge type within domain."
::= { phMediaEntry 3 }
phMediaElementAddress OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Element address where this cartridge is physically
located."
::= { phMediaEntry 4 }
phMediaMounts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times this cartridge has been mounted."
::= { phMediaEntry 5 }
phMediaReadErrors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of errors when reading from this cartridge."
::= { phMediaEntry 6 }
phMediaWriteErrors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of errors when writing to this cartridge."
::= { phMediaEntry 7 }
phMediaCapacity OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Capacity of this cartridge in megabytes. Returns
-1 if capacity is unknown."
::= { phMediaEntry 8 }
phMediaFreeSpace OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Amount of free space on this cartridge in megabytes. Returns
-1 if free space is unknown."
::= { phMediaEntry 9 }
phMediaExported OBJECT-TYPE
SYNTAX Boolean
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Has this cartridge been exported from the library?"
::= { phMediaEntry 10 }
phMediaImportTimestamp OBJECT-TYPE
SYNTAX AdicDateAndTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Timestamp when cartridge was imported.
Compatible with the SMIv2 DateAndTime
textual convention. Encode is as follows:
field octets contents range
----- ------ -------- -----
1 1-2 year 0..65536
2 3 month 1..12
3 4 day 1..31
4 5 hour 0..23
5 6 minutes 0..59
6 7 seconds 0..60
(use 60 for leap-second)
7 8 deci-seconds 0..9
8 9 direction from UTC '+' / '-'
9 10 hours from UTC 0..11
10 11 minutes from UTC 0..59
For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be
displayed as:
1992-5-26,13:30:15.0,-4:0
Note that if only local time is known, then timezone
information (fields 8-10) is not present."
::= { phMediaEntry 11 }
phMediaExportTimestamp OBJECT-TYPE
SYNTAX AdicDateAndTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Timestamp when cartridge was exported.
Compatible with the SMIv2 DateAndTime
textual convention. Encode is as follows:
field octets contents range
----- ------ -------- -----
1 1-2 year 0..65536
2 3 month 1..12
3 4 day 1..31
4 5 hour 0..23
5 6 minutes 0..59
6 7 seconds 0..60
(use 60 for leap-second)
7 8 deci-seconds 0..9
8 9 direction from UTC '+' / '-'
9 10 hours from UTC 0..11
10 11 minutes from UTC 0..59
For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be
displayed as:
1992-5-26,13:30:15.0,-4:0
Note that if only local time is known, then timezone
information (fields 8-10) is not present."
::= { phMediaEntry 12 }
--
-- End Physical Library Media definitions
--
-- *****************************************************************
--
-- Physical Library Transport Element Table
--
-- *****************************************************************
phTransportTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhTransportEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"This table provides medium changer configuration and usage information."
::= { physicalLibrary 130 }
phTransportEntry OBJECT-TYPE
SYNTAX PhTransportEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"** This entry object is optional **"
INDEX { componentId, phTransportElementAddress }
::= { phTransportTable 1 }
PhTransportEntry ::=
SEQUENCE {
phTransportElementAddress INTEGER,
phTransportNumRecoveredGets INTEGER,
phTransportNumRecoveredPuts INTEGER,
phTransportNumRecoveredScans INTEGER,
phTransportNumPuts INTEGER,
phTransportREDId AdicREDIdentifier
}
--
-- Begin Physical Library Drive definitions
--
phTransportElementAddress OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS optional
DESCRIPTION
"The medium transport element address."
::= { phTransportEntry 1 }
phTransportNumRecoveredGets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Lifetime number of recovered get operations for this
transport element."
::= { phTransportEntry 2 }
phTransportNumRecoveredPuts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Lifetime number of recovered put operations for this
transport element."
::= { phTransportEntry 3 }
phTransportNumRecoveredScans OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Lifetime number of recovered scan operations for this
transport element."
::= { phTransportEntry 4 }
phTransportNumPuts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"** This object is optional **
Number put operations for this transport
element. The count is for the entire
lifetime of the library."
::= { phTransportEntry 5 }
phTransportREDId OBJECT-TYPE
SYNTAX AdicREDIdentifier
ACCESS read-only
STATUS optional
DESCRIPTION
"** This object is optional **
Runtime Error Detection identifier for this
tape drive."
::= { phTransportEntry 6 }
--
-- End Physical Library Transport Element definitions
--
-- *****************************************************************
--
-- Physical Library Transport Element Domain Table
--
-- *****************************************************************
phTransportDomainTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhTransportDomainEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"** This table is optional **"
::= { physicalLibrary 132 }
phTransportDomainEntry OBJECT-TYPE
SYNTAX PhTransportDomainEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"** This entry object is optional **"
INDEX { componentId, phTransportElementAddress, phTransportDomainIndex }
::= { phTransportDomainTable 1 }
PhTransportDomainEntry ::=
SEQUENCE {
phTransportDomainIndex INTEGER -- points to entry in domain table
}
--
-- Begin Physical Library Drive definitions
--
phTransportDomainIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS optional
DESCRIPTION
"** This object is optional **"
::= { phTransportDomainEntry 1 }
--
-- End Physical Library Transport Element definitions
--
-- *****************************************************************
--
-- Physical Library Cleaning Media Table
--
-- *****************************************************************
phCleaningMediaTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhCleaningMediaEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"** This table is optional **
This is a combination of data about slots reserved for
automatic cleaning and the cleaning cartridges themselves.
Since the relationship between slots and cartridges is
one-to-one, we can combine these data."
::= { physicalLibrary 140 }
phCleaningMediaEntry OBJECT-TYPE
SYNTAX PhCleaningMediaEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"** This entry object is optional **"
INDEX { componentId, mediaDomainIndex,
phSegmentAisle , phSegmentFrame, phSegmentRack,
phSegmentSection, phSegmentCol, phCleaningMediaRow }
::= { phCleaningMediaTable 1 }
PhCleaningMediaEntry ::=
SEQUENCE {
phCleaningMediaRow INTEGER,
phCleaningMediaStatus INTEGER,
phCleaningMediaTypeIndex INTEGER,
phCleaningMediaVendorId DisplayString,
phCleaningMediaBarcode AdicBarCode,
phCleaningMediaUseCount INTEGER,
phCleaningMediaMaxUses INTEGER, -- this is really (per domain,type,vendor)
phCleaningMediaImportTimestamp AdicDateAndTime
}
--
-- Begin Physical Library Automatic Cleaning Media definitions
--
phCleaningMediaRow OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS optional
DESCRIPTION
"** This object is optional **"
::= { phCleaningMediaEntry 1 }
phCleaningMediaStatus OBJECT-TYPE
SYNTAX INTEGER { allocated(1), unallocated(2) }
ACCESS read-only
STATUS optional
DESCRIPTION
"** This object is optional **
Cleaning storage is allocated by segment; the value
of phCleaningMediaStatus indicates if the slot is
being used to store a cartridge or not.
allocated(1) means this slot is home to cartridge.
unallocated(2) means there is no cartridge associated with this slot."
::= { phCleaningMediaEntry 2 }
phCleaningMediaTypeIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS optional
DESCRIPTION
"** This object is optional **
Exact media type of this cleaning cartridge.
Value points to a row in the Media Type table with
mediaTypeIndex = phCleaningMediaTypeIndex."
::= { phCleaningMediaEntry 3 }
phCleaningMediaVendorId OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS optional
DESCRIPTION
"** This object is optional **
Vendor of drives that this cleaning cartridge
is designed to clean. Value points to a row
in the Vendor table with
vendorIdIndex = phCleaningMediaVendorId."
::= { phCleaningMediaEntry 4 }
phCleaningMediaBarcode OBJECT-TYPE
SYNTAX AdicBarCode
ACCESS read-write
STATUS optional
DESCRIPTION
"** This object is optional **
Barcode (if present)."
::= { phCleaningMediaEntry 5 }
phCleaningMediaUseCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS optional
DESCRIPTION
"** This object is optional **
Use count. May be set to any value to accomodate
importing cartridges that have already been used."
::= { phCleaningMediaEntry 6 }
phCleaningMediaMaxUses OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS optional
DESCRIPTION
"** This object is optional **
Maximum number of uses for this cartidge." -- this is really per (domain,type,vendor)
::= { phCleaningMediaEntry 7 }
phCleaningMediaImportTimestamp OBJECT-TYPE
SYNTAX AdicDateAndTime
ACCESS read-only
STATUS optional
DESCRIPTION
"** This object is optional **
Timestamp when this cartridge was imported.
Compatible with the SMIv2 DateAndTime
textual convention. Encode is as follows:
field octets contents range
----- ------ -------- -----
1 1-2 year 0..65536
2 3 month 1..12
3 4 day 1..31
4 5 hour 0..23
5 6 minutes 0..59
6 7 seconds 0..60
(use 60 for leap-second)
7 8 deci-seconds 0..9
8 9 direction from UTC '+' / '-'
9 10 hours from UTC 0..11
10 11 minutes from UTC 0..59
For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be
displayed as:
1992-5-26,13:30:15.0,-4:0
Note that if only local time is known, then timezone
information (fields 8-10) is not present."
::= { phCleaningMediaEntry 8 }
--
-- End Physical Library Automatic Cleaning definitions
--
-- *****************************************************************
--
-- MCB Logical Library Group
--
-- *****************************************************************
loGeneralInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoGeneralInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides general information about the Logical Library Manager."
::= { logicalLibrary 10 }
loGeneralInfoEntry OBJECT-TYPE
SYNTAX LoGeneralInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId }
::= { loGeneralInfoTable 1 }
LoGeneralInfoEntry ::=
SEQUENCE {
maxLogicalLibraries INTEGER,
numLogicalLibraries INTEGER,
masterOnlineStatus INTEGER,
numVendorIds INTEGER
}
--
-- Begin logical library general info definitions
--
maxLogicalLibraries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum number of logical libraries. This includes
all media types."
::= { loGeneralInfoEntry 1 }
numLogicalLibraries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current number of logical libraries configured.
This includes all media types."
::= { loGeneralInfoEntry 2 }
masterOnlineStatus OBJECT-TYPE
SYNTAX INTEGER { online(1), offline(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Library mode: Online/offline."
::= { loGeneralInfoEntry 3 }
numVendorIds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Supported number of library vendor names."
::= { loGeneralInfoEntry 4 }
--
-- End logical library general info definitions
--
-- *****************************************************************
--
-- Auto Partition Table
--
-- *****************************************************************
autoPartitionTable OBJECT-TYPE
SYNTAX SEQUENCE OF AutoPartitionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides variables pertaining to library auto partitioning."
::= { logicalLibrary 12 }
autoPartitionEntry OBJECT-TYPE
SYNTAX AutoPartitionEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Autopartitioning is based on the media domain, media
type, and drive data port interface type."
INDEX { componentId, mediaDomainIndex, mediaTypeIndex, phDriveInterfaceType }
::= { autoPartitionTable 1 }
AutoPartitionEntry ::=
SEQUENCE {
numAutoPartition INTEGER , -- how many partitions to create upon auto-partition
autoPartitionCommand INTEGER
}
numAutoPartition OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of partitions to create upon
automatic partitioning for a given
media domain, media type and interface
type."
::= { autoPartitionEntry 1 }
autoPartitionCommand OBJECT-TYPE
SYNTAX INTEGER { autoPartition(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform operation based on the media domain,
media type, and interface type:
autoPartition(1) - create the number of partitions
indicated by the numAutoPartition
object, with the library resouces
divided equally among the partitions."
::= { autoPartitionEntry 2 }
--
-- End Auto Partitioning Table definitions
--
-- *****************************************************************
--
-- Logical Library Vendor ID Table
--
-- *****************************************************************
vendorIdTable OBJECT-TYPE
SYNTAX SEQUENCE OF VendorIdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides information for possible vendor and product emulations."
::= { logicalLibrary 15 }
vendorIdEntry OBJECT-TYPE
SYNTAX VendorIdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, vendorIdIndex }
::= { vendorIdTable 1 }
VendorIdEntry ::=
SEQUENCE {
vendorIdIndex INTEGER,
vendorName DisplayString,
numProductIds INTEGER
}
--
-- Begin Vendor ID definitions
--
vendorIdIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vendor identification index."
::= { vendorIdEntry 1 }
vendorName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Vendor name."
::= { vendorIdEntry 2 }
numProductIds OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of product ids for the vendor name."
::= { vendorIdEntry 3 }
--
-- End Vendor ID definitions
--
-- *****************************************************************
--
-- Physical Library Product ID Table
--
-- *****************************************************************
productIdTable OBJECT-TYPE
SYNTAX SEQUENCE OF ProductIdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides supported product names and configuration
constraints."
::= { logicalLibrary 17 }
productIdEntry OBJECT-TYPE
SYNTAX ProductIdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, vendorIdIndex, productIdIndex }
::= { productIdTable 1 }
ProductIdEntry ::=
SEQUENCE {
productIdIndex INTEGER,
productIdName DisplayString,
productDrivesMin INTEGER,
productDrivesMax INTEGER,
productSlotsMin INTEGER,
productSlotsMax INTEGER,
productIeMin INTEGER,
productIeMax INTEGER
}
--
-- Begin Product ID definitions
--
productIdIndex OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Product identification index."
::= { productIdEntry 1 }
productIdName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Product name."
::= { productIdEntry 2 }
productDrivesMin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Product's minimum number of supported drives."
::= { productIdEntry 3 }
productDrivesMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Product's maximum number of supported drives."
::= { productIdEntry 4 }
productSlotsMin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Product's minimum number of supported storage slots."
::= { productIdEntry 5 }
productSlotsMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Product's maximum number of supported storage slots."
::= { productIdEntry 6 }
productIeMin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Product's minimum number of supported IE slots."
::= { productIdEntry 7 }
productIeMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Product's maximum number of supported IE slots."
::= { productIdEntry 8 }
--
-- End Product ID definitions
--
-- *****************************************************************
--
-- Logical Library Table
--
-- *****************************************************************
logicalLibraryTable OBJECT-TYPE
SYNTAX SEQUENCE OF LogicalLibraryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides information for logical libraries."
::= { logicalLibrary 20 }
logicalLibraryEntry OBJECT-TYPE
SYNTAX LogicalLibraryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, logicalLibraryIndex }
::= { logicalLibraryTable 1 }
LogicalLibraryEntry ::=
SEQUENCE {
logicalLibraryIndex INTEGER,
command INTEGER,
name DisplayString,
assignedLun INTEGER,
vendorId DisplayString,
productId DisplayString,
mediaDomain INTEGER,
mediaType INTEGER,
numSlots INTEGER,
numIE INTEGER,
numDrives INTEGER,
loStatus INTEGER,
automaticCleaning AdicEnable,
mediaTypeChecking AdicEnable,
serialNumber DisplayString,
loInterfaceType AdicInterfaceType,
loNumLibraries INTEGER,
loLtoTapeTags INTEGER,
ltfsLicensed AdicEnable
}
--
-- Begin definitions
--
logicalLibraryIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index to identify the Logical Library to be managed."
::= { logicalLibraryEntry 1 }
command OBJECT-TYPE
SYNTAX INTEGER { createSimple(1), createExpert(2), modify(3), delete(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Logical library command request."
::= { logicalLibraryEntry 2 }
name OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Logical library name."
::= { logicalLibraryEntry 3 }
assignedLun OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Assigned LUN of this library's
(virtual) SCSI media changer. This
can only be changed through the
SANMgr proxy MIB device map table."
::= { logicalLibraryEntry 4 }
vendorId OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Logical library vendor identification for SCSI inquiry string."
::= { logicalLibraryEntry 5 }
productId OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Logical library product identification for SCSI inquiry string."
::= { logicalLibraryEntry 6 }
mediaDomain OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Points to entry in the Physical Library MediaDomainTable."
::= { logicalLibraryEntry 7 }
mediaType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Points to entry in the Physical Library MediaTypeTable."
::= { logicalLibraryEntry 8 }
numSlots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Logical library configured storage slots."
::= { logicalLibraryEntry 9 }
numIE OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Logical library configured IE slots."
::= { logicalLibraryEntry 10 }
numDrives OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Logical library configured drives."
::= { logicalLibraryEntry 11 }
loStatus OBJECT-TYPE
SYNTAX INTEGER { online(1), offline(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Logical library mode."
::= { logicalLibraryEntry 12 }
automaticCleaning OBJECT-TYPE
SYNTAX AdicEnable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Logical library automatic drive cleaning setting."
::= { logicalLibraryEntry 13 }
mediaTypeChecking OBJECT-TYPE
SYNTAX AdicEnable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Logical library media type checking setting."
::= { logicalLibraryEntry 14 }
serialNumber OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical library serial number."
::= { logicalLibraryEntry 15 }
loInterfaceType OBJECT-TYPE
SYNTAX AdicInterfaceType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Logical library connection interface type."
::= { logicalLibraryEntry 16 }
loNumLibraries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS obsolete
DESCRIPTION
"Formerly used in auto partition operation.
Made obsolete by autoPartition table."
::= { logicalLibraryEntry 17 }
loLtoTapeTags OBJECT-TYPE
SYNTAX INTEGER { prefix(1), suffix(2), disabled(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Media identifier support.
Controls the inclusion of media type characters
in the media barcodes whne reporting barcodes to SCSi hosts.
For example, the LTO media type characters are
'L1' for LTO-1 and 'L2' for LTO-2. This object
applies to logical libraries of all media domains,
not just LTO (as the name suggests)."
::= { logicalLibraryEntry 18 }
ltfsLicensed OBJECT-TYPE
SYNTAX AdicEnable
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Logical library LTFS support/usage identification."
::= { logicalLibraryEntry 19 }
-- *****************************************************************
--
-- Logical Library Segement Table
--
-- This is a list of all the segments in the logical library
--
-- *****************************************************************
loSegmentTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoSegmentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is a list of all the segments in the library."
::= { logicalLibrary 25 }
loSegmentEntry OBJECT-TYPE
SYNTAX LoSegmentEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, loSegmentType, loSegmentAisle, loSegmentFrame, loSegmentRack,
loSegmentSection, loSegmentCol, loSegmentStartingRow }
::= { loSegmentTable 1 }
LoSegmentEntry ::=
SEQUENCE {
loSegmentAisle INTEGER, -- Physical aisle coordinate of segment
loSegmentFrame INTEGER, -- Physical frame coordinate of segment
loSegmentRack INTEGER, -- Physical rack coordinate of segment
loSegmentSection INTEGER, -- Physical section coordinate of segment
loSegmentCol INTEGER, -- Physical column coordinate of segment
loSegmentStartingRow INTEGER, -- Physical row value where this segment begins
loSegmentSize INTEGER,
loSegmentType AdicSegmentType,
loSegmentMediaDomain INTEGER,
loSegmentBelongsTo INTEGER,
loSegmentCommand INTEGER,
loSegmentStatus INTEGER,
loSegmentStartingAddress INTEGER -- SCSI element address of 1st element in this segment
}
--
-- Begin Physical Library Segment definitions
--
loSegmentAisle OBJECT-TYPE
SYNTAX INTEGER (0..1)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Aisle coordinate value for this segment."
::= { loSegmentEntry 1 }
loSegmentFrame OBJECT-TYPE
SYNTAX INTEGER (0..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Frame coordinate value for this segment."
::= { loSegmentEntry 2 }
loSegmentRack OBJECT-TYPE
SYNTAX INTEGER (0..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Rack coordinate value for this segment."
::= { loSegmentEntry 3 }
loSegmentSection OBJECT-TYPE
SYNTAX INTEGER (0..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Section coordinate for this segment."
::= { loSegmentEntry 4 }
loSegmentCol OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Column coordinate value for this segment."
::= { loSegmentEntry 5 }
loSegmentStartingRow OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Row coordinate of the first element in this segment.
This is useful to divide a column into multiple
segments. For instance, a segment which contains
rows 1 - 10 would have loSegmentStartingRow = 1. A
segment which contains rows 11 - 20 in the same
column would have loSegmentStartingRow = 11."
::= { loSegmentEntry 6 }
loSegmentSize OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of elements in this segment."
::= { loSegmentEntry 7 }
loSegmentType OBJECT-TYPE
SYNTAX AdicSegmentType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Type segment (storage, I/E, drive)."
::= { loSegmentEntry 8 }
loSegmentMediaDomain OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Media domain for this segment.
Points to a row in the media domain table."
::= { loSegmentEntry 9 }
loSegmentBelongsTo OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"logicalLibraryIndex to which this segment is
allocated. This object has no meaning for
an I/E segment since I/E segments may be shared.
For I/E segments, the list of logical libaraies
which share the segment may be found in the
loSegmentAssignmentTable."
::= { loSegmentEntry 10 }
loSegmentCommand OBJECT-TYPE
SYNTAX INTEGER { allocate(1), free(2), reserveForCleaning(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Operation to perform using objects in varbind list."
::= { loSegmentEntry 11 }
loSegmentStatus OBJECT-TYPE
SYNTAX INTEGER { allocated(1), unallocated(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Is this segment allocated to a logical library?"
::= { loSegmentEntry 12 }
loSegmentStartingAddress OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical SCSI element address of the first
element (row) in this segment. Element
addresses are contiguous within a segment
and unique within a logical library."
::= { loSegmentEntry 13 }
-- *****************************************************************
--
-- Logical Library Segement BelongsTo Table
--
-- This is a list of all logical library to which each segment is
-- assigned.
--
-- *****************************************************************
loSegmentBelongsToTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoSegmentBelongsToEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is a list of the logical libraries to
which each segments belongs. Storage and
drive segments belong to a maximum of
one logical library, but I/E segments
may be shared among several logical libraries."
::= { logicalLibrary 27 }
loSegmentBelongsToEntry OBJECT-TYPE
SYNTAX LoSegmentBelongsToEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId , loSegmentType,
loSegmentAisle , loSegmentFrame, loSegmentRack,
loSegmentSection, loSegmentCol, loSegmentStartingRow,
loSegmentAssignedTo }
::= { loSegmentBelongsToTable 1 }
LoSegmentBelongsToEntry ::=
SEQUENCE {
loSegmentAssignedTo INTEGER
}
--
-- Begin Physical Library Segment definitions
--
loSegmentAssignedTo OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"logicalLibraryIndex to which this segment belongs.
Reporting -1 if not assigned."
::= { loSegmentBelongsToEntry 1 }
-- *****************************************************************
--
-- Logical Library Storage Segement Table
--
-- This is a list of all the storage segments in the logical library
--
-- *****************************************************************
loStorageSegTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoStorageSegEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides a list of all the storage segments in the library,
indexed by a flat segment index loStorageSegIndex."
::= { logicalLibrary 30 }
loStorageSegEntry OBJECT-TYPE
SYNTAX LoStorageSegEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, logicalLibraryIndex,
loSegmentAisle , loSegmentFrame, loSegmentRack,
loSegmentSection, loSegmentCol, loSegmentStartingRow }
::= { loStorageSegTable 1 }
LoStorageSegEntry ::=
SEQUENCE {
loStorageSegSize INTEGER, -- Number of storage elements in this segment
loStorageSegStartingAddress INTEGER
}
--
-- Begin Physical Library Segment definitions
--
loStorageSegSize OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of storage elements in this segment."
::= { loStorageSegEntry 1 }
loStorageSegStartingAddress OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical SCSI element address of the first element
(row) in this storage segment. Element
addresses are contiguous within a segment
and unique within a logical library."
::= { loStorageSegEntry 2 }
-- *****************************************************************
--
-- Logical Library I/E Segement Table
--
-- This is a list of all the storage segments in the logical library
--
-- *****************************************************************
loIeSegTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoIeSegEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides a list of all I/E segments in the logical library."
::= { logicalLibrary 40 }
loIeSegEntry OBJECT-TYPE
SYNTAX LoIeSegEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, logicalLibraryIndex,
loSegmentAisle , loSegmentFrame, loSegmentRack,
loSegmentSection, loSegmentCol, loSegmentStartingRow }
::= { loIeSegTable 1 }
LoIeSegEntry ::=
SEQUENCE {
loIeSegSize INTEGER,
loIeSegReserve INTEGER,
loIeSegReservedBy INTEGER,
loIeSegStartingAddress INTEGER
}
--
-- Begin Logical Library I/E Segment definitions
--
loIeSegSize OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of I/E elements in this segment."
::= { loIeSegEntry 1 }
loIeSegReserve OBJECT-TYPE
SYNTAX INTEGER { reserve(1), release(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Mechanism to release and reserve this I/E segment."
::= { loIeSegEntry 2 }
loIeSegReservedBy OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Index of logical library for which this
I/E segment has been reserved."
::= { loIeSegEntry 3 }
loIeSegStartingAddress OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical SCSI element address of the first
element (row) in this I/E segment. Element
addresses are contiguous within a segment
and unique within a logical library."
::= { loIeSegEntry 4 }
-- *****************************************************************
--
-- Physical Library Drive Segement Table
--
-- This is a list of all the storage segments in the library
--
-- *****************************************************************
loDriveSegTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoDriveSegEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides a a list of the drive segments in the library."
::= { logicalLibrary 50 }
loDriveSegEntry OBJECT-TYPE
SYNTAX LoDriveSegEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, logicalLibraryIndex,
loSegmentAisle , loSegmentFrame, loSegmentRack,
loSegmentSection, loSegmentCol, loSegmentStartingRow }
::= { loDriveSegTable 1 }
LoDriveSegEntry ::=
SEQUENCE {
loDriveSegSize INTEGER,
loDriveSegStartingAddress INTEGER,
loDriveSegMediaType INTEGER,
loDriveSegInterfaceType AdicInterfaceType
}
--
-- Begin Logical Library Segment definitions
--
loDriveSegSize OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of elements in this segment."
::= { loDriveSegEntry 1 }
loDriveSegStartingAddress OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Logical SCSI element address of the first
element (row) in this drive segment. Element
addresses are contiguous within a segment
and unique within a logical library."
::= { loDriveSegEntry 2 }
loDriveSegMediaType OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Exact media type of this segment.
With loSegmentMediaDomain, points a
row in the media type table."
::= { loDriveSegEntry 3 }
loDriveSegInterfaceType OBJECT-TYPE
SYNTAX AdicInterfaceType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Data interface for this segment."
::= { loDriveSegEntry 4 }
-- *****************************************************************
--
-- Logical Library Storage Slot Table
--
-- *****************************************************************
loStorageSlotTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoStorageSlotEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides a a list of all storage slots in the library."
::= { logicalLibrary 60 }
loStorageSlotEntry OBJECT-TYPE
SYNTAX LoStorageSlotEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, logicalLibraryIndex,
loSegmentAisle , loSegmentFrame, loSegmentRack,
loSegmentSection, loSegmentCol, loStorageRow }
::= { loStorageSlotTable 1 }
LoStorageSlotEntry ::=
SEQUENCE {
loStorageRow INTEGER
}
--
-- Begin Logical Storage Slot definitions
--
loStorageRow OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Row coordinate value for this storage slot."
::= { loStorageSlotEntry 1 }
--
-- End Logical Storage Slot definitions
--
-- *****************************************************************
--
-- Logical Library I/E Slot Table
--
-- *****************************************************************
loIeSlotTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoIeSlotEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides a a list of all IE slots in the library."
::= { logicalLibrary 70 }
loIeSlotEntry OBJECT-TYPE
SYNTAX LoIeSlotEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, logicalLibraryIndex,
loSegmentAisle, loSegmentFrame, loSegmentRack,
loSegmentSection, loSegmentCol, loIeRow }
::= { loIeSlotTable 1 }
LoIeSlotEntry ::=
SEQUENCE {
loIeRow INTEGER
}
--
-- Begin Logical I/E Slot definitions
--
loIeRow OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Row coordinate value for this IE slot."
::= { loIeSlotEntry 1 }
--
-- End Logical I/E Slot definitions
--
-- *****************************************************************
--
-- Logical Library Drive Table
--
-- *****************************************************************
loDriveTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoDriveEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides a a list of all drive slots in the library."
::= { logicalLibrary 80 }
loDriveEntry OBJECT-TYPE
SYNTAX LoDriveEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, logicalLibraryIndex,
loSegmentAisle , loSegmentFrame, loSegmentRack,
loSegmentSection, loSegmentCol, loDriveRow }
::= { loDriveTable 1 }
LoDriveEntry ::=
SEQUENCE {
loDriveRow INTEGER
}
--
-- Begin Logical Library Drive definitions
--
loDriveRow OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Row coordinate value for where this drive
element is physically located."
::= { loDriveEntry 1 }
--
-- End Logical Library Drive definitions
--
loStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoStatisticsEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"This table provides statistics for each logical library."
::= { logicalLibrary 90 }
loStatisticsEntry OBJECT-TYPE
SYNTAX LoStatisticsEntry
ACCESS not-accessible
STATUS optional
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId, logicalLibraryIndex }
::= { loStatisticsTable 1 }
LoStatisticsEntry ::=
SEQUENCE {
loNumRecoveredGets INTEGER,
loNumRecoveredPuts INTEGER,
loNumRecoveredScans INTEGER,
loStatsNumPuts INTEGER,
loStatsNumPutRetries INTEGER,
loStatsNumGetRetries INTEGER,
loStatsNumScanRetries INTEGER
}
--
-- Begin loStatistics definitions
--
loNumRecoveredGets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Lifetime number of recovered get operations for this
logical library."
::= { loStatisticsEntry 1 }
loNumRecoveredPuts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Lifetime number of recovered putt operations for this
logical library."
::= { loStatisticsEntry 2 }
loNumRecoveredScans OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Lifetime number of recovered scan operations for this
logical library."
::= { loStatisticsEntry 3 }
loStatsNumPuts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Lifetime number of put operations performed for this
logical library."
::= { loStatisticsEntry 4 }
loStatsNumPutRetries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Lifetime number of retried put operations performed for this
logical library."
::= { loStatisticsEntry 5 }
loStatsNumGetRetries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Lifetime number of retried get operations performed for this
logical library."
::= { loStatisticsEntry 6 }
loStatsNumScanRetries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS optional
DESCRIPTION
"Lifetime number of retried scan operations performed for this
logical library."
::= { loStatisticsEntry 7 }
--
-- End loStatistics definitions
--
-- *****************************************************************
--
-- MCB RAS Group
--
-- *****************************************************************
-- *****************************************************************
--
-- System Status Table
--
-- *****************************************************************
rasSystemStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RasSystemStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides status information for various system
status groups."
::= { ras 10 }
rasSystemStatusEntry OBJECT-TYPE
SYNTAX RasSystemStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information for a particular system status group.
The componentId index refers to the MCB through
which the management application accesses the RAS
manager. The rasStatusGroupIndex specifies the
system status group for which the entry contains
information."
INDEX { componentId, rasStatusGroupIndex }
::= { rasSystemStatusTable 1 }
RasSystemStatusEntry ::=
SEQUENCE {
rasStatusGroupIndex AdicStatusGroup,
rasStatusGroupStatus AdicStatusGroupState,
rasStatusGroupPreviousStatus AdicStatusGroupState,
rasStatusGroupTextSummary DisplayString,
rasStatusGroupTotalTickets INTEGER,
rasStatusGroupOpenTickets INTEGER,
rasStatusGroupActionsPending INTEGER,
rasStatusGroupLastChange AdicDateAndTime
}
--
-- Begin RAS System Status Table definitions
--
rasStatusGroupIndex OBJECT-TYPE
SYNTAX AdicStatusGroup
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the system status group for which
this row object contains information."
::= { rasSystemStatusEntry 1 }
rasStatusGroupStatus OBJECT-TYPE
SYNTAX AdicStatusGroupState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status (or condition) of this system status group.
Use of the 'indeterminate' state: 'indeterminate' is
primarily for use in the rasStatusGroupPreviousStatus
object, where there may not be any previous state
information."
::= { rasSystemStatusEntry 2 }
rasStatusGroupPreviousStatus OBJECT-TYPE
SYNTAX AdicStatusGroupState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"After a state change, this object gives the
previous state of the system status group.
If there is no previous state information
available, such as when resetting the system,
the previous state is 'indeterminate'."
::= { rasSystemStatusEntry 3 }
rasStatusGroupTextSummary OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A brief message describing the state of this
system status group. If the rasStatusGroupStatus
is other than 'good', this object should return
the reason why this is so."
::= { rasSystemStatusEntry 4 }
rasStatusGroupTotalTickets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of RAS tickets created
against this system status group."
::= { rasSystemStatusEntry 5 }
rasStatusGroupOpenTickets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of RAS tickets currently open
against this system status group."
::= { rasSystemStatusEntry 6 }
rasStatusGroupActionsPending OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of actions pending
against this system status group."
::= { rasSystemStatusEntry 7 }
rasStatusGroupLastChange OBJECT-TYPE
SYNTAX AdicDateAndTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Timestamp of the last time the status changed."
::= { rasSystemStatusEntry 8 }
-- *****************************************************************
--
-- RAS Ticket Table
--
-- *****************************************************************
rasTicketTable OBJECT-TYPE
SYNTAX SEQUENCE OF RasTicketEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains one row for each ticket in the
database."
::= { ras 20 }
rasTicketEntry OBJECT-TYPE
SYNTAX RasTicketEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry contains information for a
single RAS ticket. The componentId index
refers to the MCB through which the management
application accesses the RAS manager. The
rasTicketId specifies the ticket instance."
INDEX { componentId, rasTicketId }
::= { rasTicketTable 1 }
RasTicketEntry ::=
SEQUENCE {
rasTicketId Gauge,
rasTicketRowStatus RowStatus,
rasTicketState AdicRasTicketState,
rasTicketQualifier INTEGER,
rasTicketSeverity INTEGER,
rasTicketDescription DisplayString,
rasTicketStatusGroup AdicStatusGroup,
rasTicketGroupStatus AdicStatusGroupState,
rasTicketClosedBy INTEGER,
rasTicketVerifiedBy INTEGER,
rasTicketComments DisplayString,
rasTicketSerialNumber AdicFruSerialNumber,
rasTicketTimeOpened AdicDateAndTime,
rasTicketTimeClosed AdicDateAndTime,
rasTicketCount INTEGER,
rasTicketKeyReport INTEGER,
rasTicketEventCode DisplayString
}
--
-- Begin RAS Ticket Table definitions
--
rasTicketId OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Unique identifier for this ticket. The RAS
system defines the ticket ID as an unsigned
32 bit integer, so it is declared here as a
Gauge32."
::= { rasTicketEntry 1 }
rasTicketRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls creation and deletion of rows
in this table. Creation of RAS tickets
via SNMP is currently not permitted, so
writing a value of createAndGo(4) or
createAndWait(5) does not create a new
row; it may return error indication."
::= { rasTicketEntry 2 }
rasTicketState OBJECT-TYPE
SYNTAX AdicRasTicketState
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Current ticket state."
::= { rasTicketEntry 3 }
rasTicketQualifier OBJECT-TYPE
SYNTAX INTEGER { none(1), resolved(2), cannotDuplicate(3), asDesigned(4), manualOverride(5) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Additional ticket state explanation."
::= { rasTicketEntry 4 }
rasTicketSeverity OBJECT-TYPE
SYNTAX AdicRasTicketSeverity
ACCESS read-write
STATUS mandatory
DESCRIPTION
"RAS ticket priority."
::= { rasTicketEntry 5 }
rasTicketDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"RAS ticket issue information."
::= { rasTicketEntry 6 }
rasTicketStatusGroup OBJECT-TYPE
SYNTAX AdicStatusGroup
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RAS status group to which this ticket belongs."
::= { rasTicketEntry 7 }
rasTicketGroupStatus OBJECT-TYPE
SYNTAX AdicStatusGroupState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current RAS group status."
::= { rasTicketEntry 8 }
rasTicketClosedBy OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ticket closure identification: user or system."
::= { rasTicketEntry 9 }
rasTicketVerifiedBy OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Ticket verification identification: user or system."
::= { rasTicketEntry 10 }
rasTicketComments OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"RAs ticket issue details."
::= { rasTicketEntry 11 }
rasTicketSerialNumber OBJECT-TYPE
SYNTAX AdicFruSerialNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RAS ticket FRU serial number."
::= { rasTicketEntry 12 }
rasTicketTimeOpened OBJECT-TYPE
SYNTAX AdicDateAndTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Date and time when ticket was opened."
::= { rasTicketEntry 13 }
rasTicketTimeClosed OBJECT-TYPE
SYNTAX AdicDateAndTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Date and time when ticket was closed."
::= { rasTicketEntry 14 }
rasTicketCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times an attempt was made to open
a duplicate ticket."
::= { rasTicketEntry 15 }
rasTicketKeyReport OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains 0 or a valid rasReportId value.
Indicates which report is currently responsible
for the severity of the ticket."
::= { rasTicketEntry 16 }
rasTicketEventCode OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reports the event code string that caused the ticket."
::= { rasTicketEntry 17 }
-- *****************************************************************
--
-- RAS Report Table
--
-- *****************************************************************
rasReportTable OBJECT-TYPE
SYNTAX SEQUENCE OF RasReportEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains one row for each ticket/report
combination in the database. The table
is indexed off the RAS Ticket Table, it
may contain many RAS Report entries for
a single RAS Ticket."
::= { ras 30 }
rasReportEntry OBJECT-TYPE
SYNTAX RasReportEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry contains information for a
single RAS Report."
INDEX { componentId, rasTicketId, rasReportId }
::= { rasReportTable 1 }
RasReportEntry ::=
SEQUENCE {
rasReportId Gauge,
rasReportRowStatus RowStatus,
rasReportTimestamp AdicDateAndTime,
rasReportStatusGroup AdicStatusGroup,
rasReportOrcData OCTET STRING,
rasReportGroupStatus AdicStatusGroupState,
rasReportDescription DisplayString,
rasReportOrcDescription DisplayString,
rasReportRepeatCounter INTEGER,
rasReportSerialNumber AdicFruSerialNumber,
rasReportHeadReport INTEGER
}
--
-- Begin RAS Ticket Table definitions
--
rasReportId OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the RAS Report for which this
this row object contains information. The RAS
system defines the report ID as an unsigned
32 bit integer, so it is declared here as a
Guage32."
::= { rasReportEntry 1 }
rasReportRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Controls creation and deletion of rows
in the RAS Report table."
::= { rasReportEntry 2 }
rasReportTimestamp OBJECT-TYPE
SYNTAX AdicDateAndTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time when this event was generated."
::= { rasReportEntry 3 }
rasReportStatusGroup OBJECT-TYPE
SYNTAX AdicStatusGroup
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The subsystem that is reporting
the event."
::= { rasReportEntry 4 }
rasReportOrcData OBJECT-TYPE
SYNTAX OCTET STRING ( SIZE( 16 ) )
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Event payload generated by the reporting
subsystem."
::= { rasReportEntry 5 }
rasReportGroupStatus OBJECT-TYPE
SYNTAX AdicStatusGroupState
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Status determination that this report indicates
against the specific FRU."
::= { rasReportEntry 6 }
rasReportDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"RAS ticket report issue information."
::= { rasReportEntry 7 }
rasReportOrcDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Description of the operation result code."
::= { rasReportEntry 8 }
rasReportRepeatCounter OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times an identical report has been
generated."
::= { rasReportEntry 9 }
rasReportSerialNumber OBJECT-TYPE
SYNTAX AdicFruSerialNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RAS ticket FRU serial number."
::= { rasReportEntry 10 }
rasReportHeadReport OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The head report field allows reports
to be sorted according to FRU branch."
::= { rasReportEntry 11 }
-- *****************************************************************
--
-- RAS Ticket Filter Table
--
-- *****************************************************************
rasTicketFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF RasTicketFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains filter settings for ticket table
walking. Only those rows which match the
filter criteria will appear in the RAS
ticket table when traversed using GetNext
or GetBulk."
::= { ras 60 }
rasTicketFilterEntry OBJECT-TYPE
SYNTAX RasTicketFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table entry for the respective table index."
INDEX { componentId }
::= { rasTicketFilterTable 1 }
RasTicketFilterEntry ::=
SEQUENCE {
rasTicketFilterStatusGroup AdicStatusGroup,
rasTicketFilterState AdicRasTicketState,
rasTicketFilterSeverity AdicRasTicketSeverity
}
--
-- Begin RAS Ticket Filter Table definitions
--
rasTicketFilterStatusGroup OBJECT-TYPE
SYNTAX AdicStatusGroup
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Identifies the system status group for which
tickets will be returned."
::= { rasTicketFilterEntry 1 }
rasTicketFilterState OBJECT-TYPE
SYNTAX AdicRasTicketState
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Identifies the ticket state (open, closed, etc.) for which
tickets will be returned."
::= { rasTicketFilterEntry 2 }
rasTicketFilterSeverity OBJECT-TYPE
SYNTAX AdicRasTicketSeverity
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Identifies the ticket severity for which
tickets will be returned.
=========================================
high: Tickets/reports with status 'failed' only.
medium: Tickets/reports with status 'failed' or 'warning'.
low: All tickets/reports."
::= { rasTicketFilterEntry 3 }
--
-- End RAS Ticket Filter Table definitions
--
--===================================================================
--
-- ADIC Management MIB Trap Definitions
-- (Additional ones definbed in ADIC Intelligent Storage MIB)
--
-- Group traps according to trap "specific" number as follows:
--
-- 1 - 99 Power and Cooling Traps
-- 100 - 199 Physical Library Traps
-- 200 - 299 Logical Library Traps
-- 300 - 399 Connectivity Traps
-- 400 - 499 RAS
-- 500 - 599 System Level Traps
--
-- Note: Not all TRAPs are reported to an external receiver
-- and used internally by the library only.
--
-- 100 - 199 Physical Library Traps
--
-- TRAP 100 - internal TRAP only
physLibraryActivity TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText
}
DESCRIPTION
"The physical library activity changed:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies library activity
"
::= 100
-- TRAP 101 - external TRAP
physLibraryOnlineStatusChange TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
onlineStatus
}
DESCRIPTION
"The physical library online/offline mode status changed:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies library status change
onlineStatus - identifies current library mode
"
::= 101
-- TRAP 102 - external TRAP
physLibraryDoorStatusChange TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
physLibraryDoorStatus
}
DESCRIPTION
"A main library access door changed door access status:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies library status change
physLibraryStatus - identifies current library door status
"
::= 102
-- TRAP 103 - external TRAP
ieStationDoorStatusChange TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
phSegmentAisle,
phSegmentFrame,
phSegmentRack,
phIeStationNumber,
phIeStationDoorStatus
}
DESCRIPTION
"An I/E station door changed door access status:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies I/E station door status change
phSegmentAisle - identifies library aisle location
phSegmentFrame - identifies library frame location
phSegmentRack - identifies library rack location
phIeStationNumber - identifies I/E station index
phIeStationDoorStatus - identifies current I/E station door status
"
::= 103
-- TRAP 104 - internal TRAP only
moveMediaComplete TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
phStorageElementAddr, -- source element address
phStorageElementAddr -- destination element address
}
DESCRIPTION
"A tape cartridge has been move from one
location to another:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
phStorageElementAddr - source element address
phStorageElementAddr - destination element address
"
::= 104
-- TRAP 105 - internal TRAP only
tapeDriveAdded TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
phDriveRow -- Row component of drive's physical location
}
DESCRIPTION
"A tape drive was added to the library:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
phDriveRow - row component of the drive's physical location
"
::= 105
-- TRAP 106 - internal TRAP only
tapeDriveRemoved TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
phDriveRow
}
DESCRIPTION
"A tape drive was removed from the library.
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
phDriveRow - row component of the drive's physical location
"
::= 106
-- TRAP 107 - internal TRAP only
mediaMounted TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
phDriveRow
}
DESCRIPTION
"A tape cartridge was mounted in a drive:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
phDriveRow - row component of the drive's physical location
"
::= 107
-- TRAP 108 - internal TRAP only
mediaDismounted TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
phDriveRow,
phDriveMbytesRead,
phDriveMbytesWritten
}
DESCRIPTION
"A tape cartridge was dismounted from a drive:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
phDriveRow - row component of the drive's physical location
phDriveMbytesRead - Lifetime drive MB read
phDriveMbytesWritten - Lifetime drive MB written
"
::= 108
-- TRAP 109 - internal TRAP only
ieStationInventoryPerformed TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
phIeElementAddr,
phIeElementAddr
}
DESCRIPTION
"An I/E station inventory operation has been performed:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
phIeElementAddr - identifies starting element address
phIeElementAddr - identifies ending element address
"
::= 109
-- TRAP 110 - external TRAP
rcuReady TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
componentId
}
DESCRIPTION
"A robotics controller unit (RCU) transitioned to a Ready state:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies RCU ready state change
componentId - identifies affectedd RCU component id
"
::= 110
-- TRAP 111 - external TRAP
rcuNotReady TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
componentId
}
DESCRIPTION
"A robotics controller unit (RCU) transitioned to a Not Ready state:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies RCU ready state change
componentId - identifies affectedd RCU component id
"
::= 111
-- TRAP 112 - internal TRAP only
driveActivityUpdate TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
phHourlyMBytesRead,
phHourlyMBytesWritten,
phHourlyMounts
}
DESCRIPTION
"Drive activity integrated over a fixed time period.
Currently, the time period is one hour.
NOTE: the drive is identified by the instance OID
contained in the phHourlyMBytesRead, phHourlyMBytesWritten,
and phHourlyWritten varbinds.
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the drive activity update
phHourlyMBytesRead - identifies drive's MB read in last hour
phHourlyMBytesWritten - identifies drive's MB written in last hour
phHourlyMounts - identifies drive's number of mounts in last hour
"
::= 112
-- TRAP 113 - internal TRAP only
driveBrickFwUpdateSuccess TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
phDriveSerialNumber,
phDriveFirmwareVersion
}
DESCRIPTION
"A tape drive firmware update was successful:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the tape drive firmware update success
phDriveSerialNumber - identifies the drive's serial number
phDriveFirmwareversion - identifies the drive's firmware version
"
::= 113
-- TRAP 114 - internal TRAP only
driveBrickFwUpdateFailure TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
phDriveSerialNumber,
phDriveFirmwareVersion
}
DESCRIPTION
"A tape drive firmware update has failed:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the tape drive firmware update failure
phDriveSerialNumber - identifies the drive's serial number
phDriveFirmwareversion - identifies the drive's firmware version
"
::= 114
-- TRAP 115 - internal TRAP only
physLibraryConfigurationChange TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText
}
DESCRIPTION
"The physical configuration of the library has
changed, possibly invalidating the data
in the management application's model:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the library configuration change
"
::= 115
-- TRAP 116 - internal TRAP only
physLibraryRESChange TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
phStorageElementAddr,
phStorageElementAddr
}
DESCRIPTION
"The physical library element status data has changed.
This generally occurs after an inventory operation:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the library element status change
phStorageElementAddr - identifies starting element address
phStorageElementAddr - identifies ending element address
"
::= 116
-- TRAP 117 - internal TRAP only
driveBrickFwUpdateStart TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
phDriveSerialNumber
}
DESCRIPTION
"A tape drive firmware update has started:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the tape drive firmware update operation
phDriveSerialNumber - identifies the drive's serial number
"
::= 117
-- TRAP 118 - internal TRAP only
physLibraryLicenseChange TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText
}
DESCRIPTION
"A library license has been added or deleted:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the library license change
"
::= 118
-- TRAP 119 - internal TRAP only
physLibraryIPv4Change TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText
}
DESCRIPTION
"The IPv4 address of the library has changed:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the library IPv4 address
"
::= 119
-- TRAP 120 - internal TRAP only
physLibraryRobotChange TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
trapInstance,
trapInstanceValue
}
DESCRIPTION
"The library robot state has changed:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the library robotic state change
trapInstance - identifies robot/tower change operation:
ROBOT_DETECTED(0),ROBOT_STARTED(1),ROBOT_REPLACED92),
ROBOT_STATUS_CHANGED(3), TOWER_STATUS_CHANGED(4),
trapInstancevalue - identifies success(0) or failure(1)
"
::= 120
-- TRAP 121 - internal TRAP only
physLibrarySaveRestoreChange TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
trapInstance,
trapInstanceValue
}
DESCRIPTION
"The library save/restore state has changed, indicating
whether the save/restore image requires an update or is
in sync with the library configuration:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the library save/restore configuration change
trapInstance - identifies save/restore operation
trapInstancevalue - identifies success(0) or failure(1)
"
::= 121
--
-- 200 - 299 Logical Library Traps
--
-- TRAP 200 - internal TRAP only
logicalLibraryActivity TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
logicalLibraryIndex
}
DESCRIPTION
"A logical library performed an operation:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the logical library activity
logicalLibraryIndex - identifies the logical library reference index
"
::= 200
-- TRAP 201 - internal TRAP only
logicalLibraryCreated TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
logicalLibraryIndex
}
DESCRIPTION
"A new logical library has been created:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the logical library creation
logicalLibraryIndex - identifies the logical library reference index
"
::= 201
-- TRAP 202 - internal TRAP only
logicalLibraryModified TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
logicalLibraryIndex
}
DESCRIPTION
"A logical library has been modified:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the logical library modification
logicalLibraryIndex - identifies the logical library reference index
"
::= 202
-- TRAP 203 - internal TRAP only
logicalLibraryDeleted TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
logicalLibraryIndex
}
DESCRIPTION
"A logical library has been deleted:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the logical library deletion
logicalLibraryIndex - identifies the logical library reference index
"
::= 203
-- TRAP 204 - internal TRAP only
logicalLibraryOnlineStatusChange TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
logicalLibraryIndex,
loStatus
}
DESCRIPTION
"A logical library mode change occured:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the logical library mode change
logicalLibraryIndex - identifies the logical library reference index
loStatus - identifies the online/offline mode
"
::= 204
--
-- 300 - 399 Connectivity Traps
--
--
-- 400 - 499 RAS Traps
--
-- TRAP 400 - external TRAP
connectivityGroupStatusChange TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
rasStatusGroupIndex,
rasStatusGroupStatus,
rasTicketId,
rasReportId
}
DESCRIPTION
"The overall status of the Connectivity status group has changed:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the RAS group status change
rasStatusGroupIndex - identifies the RAS status group reference index
rasStatusGroupStatus - identifies the current state of this RAS group
rasTicketId - identfies the ticket id that cause the RAS group change
rasReportId - identifies the report id that generated the ticket
"
::= 400
-- TRAP 401 - external TRAP
controlGroupStatusChange TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
rasStatusGroupIndex,
rasStatusGroupStatus,
rasTicketId,
rasReportId
}
DESCRIPTION
"The overall state of the Control status group has changed:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the RAS group status change
rasStatusGroupIndex - identifies the RAS status group reference index
rasStatusGroupStatus - identifies the current state of this RAS group
rasTicketId - identfies the ticket id that cause the RAS group change
rasReportId - identifies the report id that generated the ticket
"
::= 401
-- TRAP 402 - external TRAP
mediaGroupStatusChange TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
rasStatusGroupIndex,
rasStatusGroupStatus,
rasTicketId,
rasReportId
}
DESCRIPTION
"The overall state of the Media RAS status group has changed:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the RAS group status change
rasStatusGroupIndex - identifies the RAS status group reference index
rasStatusGroupStatus - identifies the current state of this RAS group
rasTicketId - identfies the ticket id that cause the RAS group change
rasReportId - identifies the report id that generated the ticket
"
::= 402
-- TRAP 403 - external TRAP
drivesGroupStatusChange TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
rasStatusGroupIndex,
rasStatusGroupStatus,
rasTicketId,
rasReportId
}
DESCRIPTION
"The overall state of the Drives RAS status group has changed:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the RAS group status change
rasStatusGroupIndex - identifies the RAS status group reference index
rasStatusGroupStatus - identifies the current state of this RAS group
rasTicketId - identfies the ticket id that cause the RAS group change
rasReportId - identifies the report id that generated the ticket
"
::= 403
-- TRAP 404 - external TRAP
powerAndCoolingGroupStatusChange TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
rasStatusGroupIndex,
rasStatusGroupStatus,
rasTicketId,
rasReportId
}
DESCRIPTION
"The overall state of the Power and Cooling RAS status group has changed:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the RAS group status change
rasStatusGroupIndex - identifies the RAS status group reference index
rasStatusGroupStatus - identifies the current state of this RAS group
rasTicketId - identfies the ticket id that cause the RAS group change
rasReportId - identifies the report id that generated the ticket
"
::= 404
-- TRAP 405 - external TRAP
roboticsGroupStatusChange TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
rasStatusGroupIndex,
rasStatusGroupStatus,
rasTicketId,
rasReportId
}
DESCRIPTION
"The overall state of the Robotics RAS status group has changed:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the RAS group status change
rasStatusGroupIndex - identifies the RAS status group reference index
rasStatusGroupStatus - identifies the current state of this RAS group
rasTicketId - identfies the ticket id that cause the RAS group change
rasReportId - identifies the report id that generated the ticket
"
::= 405
-- TRAP 406 - internal TRAP only
rasEventNotification TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
rasStatusGroupIndex,
rasStatusGroupStatus,
rasTicketId,
rasReportId,
trapIntendedUsage
}
DESCRIPTION
"A RAS event has occurred, possibly requiring
action by a user or management application:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the RAS group status change
rasStatusGroupIndex - identifies the RAS status group reference index
rasStatusGroupStatus - identifies the current state of this RAS group
rasTicketId - identfies the ticket id that cause the RAS group change
rasReportId - identifies the report id that generated the ticket
trapIntendedUsage - identifies trap processing of public91) or triggerRefresh(2)
"
::= 406
-- CHP new TRAP 407 - external TRAP
rasTicketNotification TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText,
rasStatusGroupIndex,
productName,
productSerialNumber,
rasTicketId,
rasTicketEventCode,
rasTicketDescription
}
DESCRIPTION
"A RAS event has occurred, possibly requiring
action by a user or management application:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity which in this case maps to ticket severity
trapSummaryText - identifies occurence of RAS ticket and repair/resolution strategy
rasStatusGroupIndex - identifies the RAS status group reference index
productName - identifies the physical library name
productSerialNumber - identifies physical library serial number
rasTicketId - identfies the ticket identifier of this ticket
rasTicketEventCode - identifies the event code associated with the ticket
rasTicketDescription - identifies ticket information
"
::= 407
--
-- 500 - 599 System Traps
--
-- TRAP 500 - internal TRAP only
logRetrievalComplete TRAP-TYPE
ENTERPRISE management
VARIABLES
{
componentId,
trapSequenceNumber,
trapSeverity,
trapSummaryText
}
DESCRIPTION
"A log retrieval snapshot has completed:
componentId - identifies reporting controller
trapSequenceNumber - identifies trap sequence number
trapSeverity - identifies trap severity
trapSummaryText - identifies the completion of the snapshot operation
"
::= 500
END
Reference in New Issue View Git Blame Copy Permalink