mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
librenms-librenms/mibs/ALTIGA-L2TP-STATS-MIB
Adam Amstrong 53a4e91e8c clean up more mib names (remove .txt, .mib, .my) 
git-svn-id: http://www.observium.org/svn/observer/trunk@1645 61d68cd4-352d-0410-923a-c4978735b2b8
2010-08-04 16:11:32 +00:00

1319 lines
44 KiB
Plaintext
Raw Blame History

-- *------------------------------------------------------------------
-- * ALTIGA-L2TP-STATS-MIB.my: L2TP Statistics MIB.
-- *
-- * Altiga Networks was acquired by Cisco Systems on March 29, 2000
-- *
-- * Copyright (c) 2002 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
ALTIGA-L2TP-STATS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, IpAddress,
Counter32, Gauge32
FROM SNMPv2-SMI
RowStatus, DisplayString, TruthValue
FROM SNMPv2-TC
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
alStatsL2tp, alL2tpGroup
FROM ALTIGA-MIB
alL2tpMibModule
FROM ALTIGA-GLOBAL-REG
InterfaceIndex
FROM IF-MIB;
altigaL2tpStatsMibModule MODULE-IDENTITY
LAST-UPDATED "200209051300Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cvpn3000@cisco.com"
DESCRIPTION
"The Altiga L2TP Statistics MIB models counters and objects that are
of management interest for L2TP tunnels.
Acronyms
The following acronyms are used in this document:
AVP: Attribute/Value Pair
CLID: Calling Line ID
DNIS: Dialed Number Identification Service
L2TP: Layer 2 Tunnel Protocol
LAC: L2TP Access Concentrator
LNS: L2TP Network Server
MIB: Management Information Base
RWS: Receive Window Size
"
REVISION "200209051300Z"
DESCRIPTION
"Added module compliance."
REVISION "200207100000Z"
DESCRIPTION
"Updated with new header"
::= { alL2tpMibModule 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- MIB Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
alStatsL2tpGlobal OBJECT IDENTIFIER ::= { alStatsL2tp 1 }
alL2tpStatsLocalProtVers OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the protocol version and
revision of the local implementation. The
first octet contains the protocol version. The
second octet contains the protocol revision."
::= { alStatsL2tpGlobal 1 }
alL2tpStatsVendorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the Vendor name."
::= { alStatsL2tpGlobal 2 }
alL2tpStatsFirmwareRev OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object defines the firmware revision."
::= { alStatsL2tpGlobal 3 }
alL2tpStatsTotalTunnels OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of tunnels
that have successfully reached the established
state."
::= { alStatsL2tpGlobal 4 }
alL2tpStatsFailedTunnels OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of tunnels that
failed to reach the established state."
::= { alStatsL2tpGlobal 5 }
alL2tpStatsFailedAuthentications OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of failed tunnel
connection attempts because the tunnel peer
failed authentication."
::= { alStatsL2tpGlobal 6 }
alL2tpStatsActiveTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of tunnels that
are currently active."
::= { alStatsL2tpGlobal 7 }
alL2tpStatsMaxTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of simultaneously active L2TP tunnels
since the system was booted."
::= { alStatsL2tpGlobal 8 }
alL2tpStatsTotalSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of sessions
that have successfully reached the established state."
::= { alStatsL2tpGlobal 9 }
alL2tpStatsFailedSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of sessions that
failed to reach the established state for this
tunnel domain."
::= { alStatsL2tpGlobal 10 }
alL2tpStatsActiveSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of sessions that
are currently active."
::= { alStatsL2tpGlobal 11 }
alL2tpStatsMaxSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of simultaneously active L2TP sessions
since the system was booted."
::= { alStatsL2tpGlobal 12 }
alL2tpStatsControlRecvOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of control channel
octets received."
::= { alStatsL2tpGlobal 13 }
alL2tpStatsControlRecvPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of control packets
received."
::= { alStatsL2tpGlobal 14 }
alL2tpStatsControlRecvDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of control packets
received that were discarded."
::= { alStatsL2tpGlobal 15 }
alL2tpStatsControlSendOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of control channel
octets that were transmitted to tunnel endpoints."
::= { alStatsL2tpGlobal 16 }
alL2tpStatsControlSendPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of control packets
that were transmitted to tunnel endpoints."
::= { alStatsL2tpGlobal 17 }
alL2tpStatsPayloadRecvOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of payload channel
octets that were received."
::= { alStatsL2tpGlobal 18 }
alL2tpStatsPayloadRecvPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of payload packets
that were received."
::= { alStatsL2tpGlobal 19 }
alL2tpStatsPayloadRecvDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of received payload
packets that were discarded."
::= { alStatsL2tpGlobal 20 }
alL2tpStatsPayloadSendOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of payload channel
octets that were transmitted to tunnel peers."
::= { alStatsL2tpGlobal 21 }
alL2tpStatsPayloadSendPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of payload packets
that were transmitted to tunnel peers."
::= { alStatsL2tpGlobal 22 }
alL2tpStatsTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlL2tpStatsTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The L2TP tunnel status and statistics table."
::= { alStatsL2tp 2 }
alL2tpStatsTunnelEntry OBJECT-TYPE
SYNTAX AlL2tpStatsTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the alL2tpStatsTunnelTable."
INDEX { alL2tpStatsTunnelPeerIpAddr }
::= { alL2tpStatsTunnelTable 1 }
AlL2tpStatsTunnelEntry ::= SEQUENCE {
alL2tpStatsTunnelRowStatus RowStatus,
alL2tpStatsTunnelPeerIpAddr IpAddress,
alL2tpStatsTunnelLocalTID Integer32,
alL2tpStatsTunnelRemoteTID Integer32,
alL2tpStatsTunnelState INTEGER,
alL2tpStatsTunnelInitiated INTEGER,
alL2tpStatsTunnelRemoteHostName DisplayString,
alL2tpStatsTunnelRemoteVendorName DisplayString,
alL2tpStatsTunnelRemoteFirmwareRevision OCTET STRING,
alL2tpStatsTunnelRemoteProtocolVersion OCTET STRING,
alL2tpStatsTunnelInitialRemoteRWS Integer32,
alL2tpStatsTunnelBearerCapabilities INTEGER,
alL2tpStatsTunnelFramingCapabilities INTEGER,
alL2tpStatsTunnelControlRecvPackets Counter32,
alL2tpStatsTunnelControlRecvDiscards Counter32,
alL2tpStatsTunnelControlRecvZLB Counter32,
alL2tpStatsTunnelControlOutOfSequence Counter32,
alL2tpStatsTunnelControlOutOfWindow Counter32,
alL2tpStatsTunnelControlSendPackets Counter32,
alL2tpStatsTunnelControlSendZLB Counter32,
alL2tpStatsTunnelControlAckTimeouts Counter32,
alL2tpStatsTunnelCurrentRemoteRWS Gauge32,
alL2tpStatsTunnelSendSeq Integer32,
alL2tpStatsTunnelSendSeqAck Integer32,
alL2tpStatsTunnelRecvSeq Integer32,
alL2tpStatsTunnelRecvSeqAck Integer32,
alL2tpStatsTunnelTotalSessions Counter32,
alL2tpStatsTunnelFailedSessions Counter32,
alL2tpStatsTunnelActiveSessions Gauge32,
alL2tpStatsTunnelLastResultCode Integer32,
alL2tpStatsTunnelLastErrorCode Integer32,
alL2tpStatsTunnelLastErrorMessage DisplayString
}
alL2tpStatsTunnelRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row. Used to terminate the tunnel,
cannot be used to create a tunnel."
::= { alL2tpStatsTunnelEntry 1 }
alL2tpStatsTunnelPeerIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer's IP address for this tunnel."
::= { alL2tpStatsTunnelEntry 2 }
alL2tpStatsTunnelLocalTID OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the local tunnel Identifier."
::= { alL2tpStatsTunnelEntry 3 }
alL2tpStatsTunnelRemoteTID OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the remote tunnel Identifier."
::= { alL2tpStatsTunnelEntry 4 }
alL2tpStatsTunnelState OBJECT-TYPE
SYNTAX INTEGER {
tunnelIdle(1),
tunnelConnecting(2),
tunnelEstablished(3),
tunnelDisconnecting(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field contains the current state of the control
tunnel."
::= { alL2tpStatsTunnelEntry 5 }
alL2tpStatsTunnelInitiated OBJECT-TYPE
SYNTAX INTEGER {
locally(1),
remotely(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the tunnel was
initiated locally or by the remote tunnel peer."
::= { alL2tpStatsTunnelEntry 6 }
alL2tpStatsTunnelRemoteHostName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the host name as discovered
during the tunnel establishment phase (via the Host
Name AVP) of the L2TP peer. If the tunnel is idle
this object should maintain its value from the last
time it was connected."
::= { alL2tpStatsTunnelEntry 7 }
alL2tpStatsTunnelRemoteVendorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the vendor name of the peer's
L2TP implementation. If the tunnel is idle this
object should maintain its value from the last time
it was connected."
::= { alL2tpStatsTunnelEntry 8 }
alL2tpStatsTunnelRemoteFirmwareRevision OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the tunnel peer's firmware
revision number. If the tunnel is idle this object
should maintain its value from the last time it
was connected."
::= { alL2tpStatsTunnelEntry 9 }
alL2tpStatsTunnelRemoteProtocolVersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the protocol version and
revision of the tunnel peers implementation. The
first octet contains the protocol version. The
second octet contains the protocol revision."
::= { alL2tpStatsTunnelEntry 10 }
alL2tpStatsTunnelInitialRemoteRWS OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the initial remote peer's
receive window size as indicated by the tunnel peer
(in the RWS AVP) during the tunnel establishment
phase. If the tunnel is idle this object should
maintain its value from the last time it was
connected."
::= { alL2tpStatsTunnelEntry 11 }
alL2tpStatsTunnelBearerCapabilities OBJECT-TYPE
SYNTAX INTEGER {
sync(1),
async(2),
syncAsync(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the Bearer Capabilities of
the tunnel peer. If the tunnel is idle this object
should maintain its value from the last time it was
connected."
::= { alL2tpStatsTunnelEntry 12 }
alL2tpStatsTunnelFramingCapabilities OBJECT-TYPE
SYNTAX INTEGER {
digital(1),
analog(2),
digitalAnalog(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the Framing Capabilities of
the tunnel peer. If the tunnel is idle this object
should maintain its value from the last time it was
connected."
::= { alL2tpStatsTunnelEntry 13 }
alL2tpStatsTunnelControlRecvPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of control packets
received on the tunnel."
::= { alL2tpStatsTunnelEntry 14 }
alL2tpStatsTunnelControlRecvDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of received payload
packets that were discarded."
::= { alL2tpStatsTunnelEntry 15 }
alL2tpStatsTunnelControlRecvZLB OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns a count of the number of Zero
Length Body control packet acknowledgement packets
that were received."
::= { alL2tpStatsTunnelEntry 16 }
alL2tpStatsTunnelControlOutOfSequence OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns a count of the number of
control packets that were not received in the
correct order (as per the sequence number) on
this tunnel."
::= { alL2tpStatsTunnelEntry 17 }
alL2tpStatsTunnelControlOutOfWindow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of control
packets that were received outside of the
offered receive window. It is implementation
specific as to whether these packets are queued
or discarded."
::= { alL2tpStatsTunnelEntry 18 }
alL2tpStatsTunnelControlSendPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of control
packets that were transmitted to the tunnel
peer."
::= { alL2tpStatsTunnelEntry 19 }
alL2tpStatsTunnelControlSendZLB OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the number of Zero Length
Body control packets that were transmitted to
the tunnel peer."
::= { alL2tpStatsTunnelEntry 20 }
alL2tpStatsTunnelControlAckTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns a count of the number of
control packet timeouts due to the lack of a
timely acknowledgement from the tunnel peer."
::= { alL2tpStatsTunnelEntry 21 }
alL2tpStatsTunnelCurrentRemoteRWS OBJECT-TYPE
SYNTAX Gauge32 (0..64)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the current remote receive
window size as determined by the local flow
control mechanism employed."
::= { alL2tpStatsTunnelEntry 22 }
alL2tpStatsTunnelSendSeq OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the next send sequence number
for the control channel."
::= { alL2tpStatsTunnelEntry 23 }
alL2tpStatsTunnelSendSeqAck OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the send sequence number that
the tunnel peer has acknowledged for the control
channel. The flow control state can be determined
by subtracting the l2tpTunnelStatsSendSeq from
alL2tpStatsTunnelSendSeqAck and comparing this value
to l2tpTunnelStatsCurrentRemoteRWS."
::= { alL2tpStatsTunnelEntry 24 }
alL2tpStatsTunnelRecvSeq OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the next receive sequence
number expected to be received on this control
channel."
::= { alL2tpStatsTunnelEntry 25 }
alL2tpStatsTunnelRecvSeqAck OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the last receive sequence
number that was acknowledged back to the tunnel
peer for the control channel."
::= { alL2tpStatsTunnelEntry 26 }
alL2tpStatsTunnelTotalSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the total number of sessions
that this tunnel has successfully connected through
to its tunnel peer since this tunnel was created."
::= { alL2tpStatsTunnelEntry 27 }
alL2tpStatsTunnelFailedSessions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the total number of sessions
that were initiated but failed to reach the
established phase."
::= { alL2tpStatsTunnelEntry 28 }
alL2tpStatsTunnelActiveSessions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the total number of sessions
for this tunnel."
::= { alL2tpStatsTunnelEntry 29 }
alL2tpStatsTunnelLastResultCode OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the last value of the result
code as described in the Result Code AVP which
caused the tunnel to disconnect."
::= { alL2tpStatsTunnelEntry 30 }
alL2tpStatsTunnelLastErrorCode OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the last value of the error
code as described in the Result Code AVP which
caused the tunnel to disconnect."
::= { alL2tpStatsTunnelEntry 31 }
alL2tpStatsTunnelLastErrorMessage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the last value of the optional
message as described in the Result Code AVP which
caused the tunnel to disconnect."
::= { alL2tpStatsTunnelEntry 32 }
alL2tpStatsSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlL2tpStatsSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The L2TP session status and statistics table."
::= { alStatsL2tp 3 }
alL2tpStatsSessionEntry OBJECT-TYPE
SYNTAX AlL2tpStatsSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An L2TP session interface stats entry."
INDEX { alL2tpStatsSessionIfIndex }
::= { alL2tpStatsSessionTable 1 }
AlL2tpStatsSessionEntry ::= SEQUENCE {
alL2tpStatsSessionRowStatus RowStatus,
alL2tpStatsSessionIfIndex InterfaceIndex,
alL2tpStatsSessionTID Integer32,
alL2tpStatsSessionLocalCID Integer32,
alL2tpStatsSessionRemoteCID Integer32,
alL2tpStatsSessionUserName DisplayString,
alL2tpStatsSessionState INTEGER,
alL2tpStatsSessionCallType INTEGER,
alL2tpStatsSessionCallSerialNumber Unsigned32,
alL2tpStatsSessionTxConnectSpeed Integer32,
alL2tpStatsSessionRxConnectSpeed Integer32,
alL2tpStatsSessionCallBearerType INTEGER,
alL2tpStatsSessionFramingType INTEGER,
alL2tpStatsSessionPhysChanId Integer32,
alL2tpStatsSessionDNIS DisplayString,
alL2tpStatsSessionCLID DisplayString,
alL2tpStatsSessionSubAddress DisplayString,
alL2tpStatsSessionPrivateGroupID DisplayString,
alL2tpStatsSessionProxyLcp TruthValue,
alL2tpStatsSessionAuthMethod INTEGER,
alL2tpStatsSessionLocalRWS Integer32,
alL2tpStatsSessionRemoteInitialRWS Integer32,
alL2tpStatsSessionRemotePPD Integer32,
alL2tpStatsSessionSequencingState INTEGER,
alL2tpStatsSessionRecvOctets Counter32,
alL2tpStatsSessionRecvPackets Counter32,
alL2tpStatsSessionRecvDiscards Counter32,
alL2tpStatsSessionRecvZLB Counter32,
alL2tpStatsSessionOutSequence Counter32,
alL2tpStatsSessionOutOfWindow Counter32,
alL2tpStatsSessionSendOctets Counter32,
alL2tpStatsSessionSendPackets Counter32,
alL2tpStatsSessionSendZLB Counter32,
alL2tpStatsSessionAckTimeouts Counter32,
alL2tpStatsSessionReassemblyTimeouts Counter32,
alL2tpStatsSessionCurrentRemoteRWS Gauge32,
alL2tpStatsSessionSendSeq Integer32,
alL2tpStatsSessionSendSeqAck Integer32,
alL2tpStatsSessionSendSeqResets Counter32,
alL2tpStatsSessionRecvSeq Integer32,
alL2tpStatsSessionRecvSeqAck Integer32,
alL2tpStatsSessionRecvSeqResets Counter32,
alL2tpStatsSessionTunnelPeerIpAddr IpAddress
}
alL2tpStatsSessionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row. Used to terminate the session,
cannot be used to create a session."
::= { alL2tpStatsSessionEntry 1 }
alL2tpStatsSessionIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value for this object is equal to the value
of ifIndex of the Interfaces MIB for session
interfaces of type L2TP."
::= { alL2tpStatsSessionEntry 2 }
alL2tpStatsSessionTID OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the control channel tunnel
identifier for this session."
::= { alL2tpStatsSessionEntry 3 }
alL2tpStatsSessionLocalCID OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the local call identifier
for the session."
::= { alL2tpStatsSessionEntry 4 }
alL2tpStatsSessionRemoteCID OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the remote call identifier
for the session."
::= { alL2tpStatsSessionEntry 5 }
alL2tpStatsSessionUserName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the peer session name on
this interface. This is typically the login name
of the remote user. If the user name is unknown to
the local tunnel peer then this object will contain
a null string."
::= { alL2tpStatsSessionEntry 6 }
alL2tpStatsSessionState OBJECT-TYPE
SYNTAX INTEGER {
sessionIdle(1),
sessionConnecting(2),
sessionEstablished(3),
sessionDisconnecting(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the current state of the
session."
::= { alL2tpStatsSessionEntry 7 }
alL2tpStatsSessionCallType OBJECT-TYPE
SYNTAX INTEGER {
lacIncoming(1),
lnsIncoming(2),
lacOutgoing(3),
lnsOutgoing(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the type of call and the
role this tunnel peer is providing for this
session. For example, lacIncoming(1) indicates
that this tunnel peer is acting as a LAC and
generated a Incoming-Call-Request to the tunnel
peer (the LNS). Note that tunnel peers can be
both LAC and LNS simultaneously."
::= { alL2tpStatsSessionEntry 8 }
alL2tpStatsSessionCallSerialNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the serial number that has
been assigned to this session."
::= { alL2tpStatsSessionEntry 9 }
alL2tpStatsSessionTxConnectSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the last known transmit
baud rate for this session."
::= { alL2tpStatsSessionEntry 10 }
alL2tpStatsSessionRxConnectSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the last known receive
baud rate for this session."
::= { alL2tpStatsSessionEntry 11 }
alL2tpStatsSessionCallBearerType OBJECT-TYPE
SYNTAX INTEGER {
digital(1),
analog(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the bearer type of this
session."
::= { alL2tpStatsSessionEntry 12 }
alL2tpStatsSessionFramingType OBJECT-TYPE
SYNTAX INTEGER {
asynchronous(1),
synchronous(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object describes the framing type of this
session."
::= { alL2tpStatsSessionEntry 13 }
alL2tpStatsSessionPhysChanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the physical channel
identifier for the session."
::= { alL2tpStatsSessionEntry 14 }
alL2tpStatsSessionDNIS OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the Dialed Number
Information String that the LAC obtained from
the network for the session. If no DNIS was
provided then a null string will be returned."
::= { alL2tpStatsSessionEntry 15 }
alL2tpStatsSessionCLID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the Calling Line ID
that the LAC obtained from the network for
the session. If no CLID was provided then a
null string will be returned."
::= { alL2tpStatsSessionEntry 16 }
alL2tpStatsSessionSubAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the Sub Address that
the LAC obtained from the network for the
session. If no Sub Address was provided then
a null string will be returned."
::= { alL2tpStatsSessionEntry 17 }
alL2tpStatsSessionPrivateGroupID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the Private Group
Identifier used for this tunneled session.
If no Private Group Identifier was provided
then a null string will be returned."
::= { alL2tpStatsSessionEntry 18 }
alL2tpStatsSessionProxyLcp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the LAC performed proxy LCP
for this session."
::= { alL2tpStatsSessionEntry 19 }
alL2tpStatsSessionAuthMethod OBJECT-TYPE
SYNTAX INTEGER {
none(1),
text(2),
pppChap(3),
pppPap(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the proxy authentication
method employed by the LAC for the session. If
l2tpSessionProxyLcp is false(2) this object should
not be interpreted."
::= { alL2tpStatsSessionEntry 20 }
alL2tpStatsSessionLocalRWS OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object returns the local send window size
for this session. If the value of the object
alL2tpStatsSessionSequencingState is none(1)
then this object should not be interpreted."
::= { alL2tpStatsSessionEntry 21 }
alL2tpStatsSessionRemoteInitialRWS OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object returns the initial remote send
window size for this session. If the value
of the object alL2tpStatsSessionSequencingState
is none(1) then this object should not be
interpreted."
::= { alL2tpStatsSessionEntry 22 }
alL2tpStatsSessionRemotePPD OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the Packet Processing Delay
for the session. If the value of the object
alL2tpStatsSessionSequencingState is none(1)
then this object should not be interpreted."
::= { alL2tpStatsSessionEntry 23 }
alL2tpStatsSessionSequencingState OBJECT-TYPE
SYNTAX INTEGER {
none(1),
remote(2),
local(3),
both(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object defines which tunnel peers have
requested payload sequencing. The value of
both(4) indicates that both peers have requested
payload sequencing."
::= { alL2tpStatsSessionEntry 24 }
alL2tpStatsSessionRecvOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number payload octets
received for this session."
::= { alL2tpStatsSessionEntry 25 }
alL2tpStatsSessionRecvPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of payload packets
received for this session."
::= { alL2tpStatsSessionEntry 26 }
alL2tpStatsSessionRecvDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of payload packets
received that were discarded for this session."
::= { alL2tpStatsSessionEntry 27 }
alL2tpStatsSessionRecvZLB OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object returns the total number of Zero Length
Body acknowlegement payload packets received for
this session."
::= { alL2tpStatsSessionEntry 28 }
alL2tpStatsSessionOutSequence OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of packets
received for this session which were received out
of sequence."
::= { alL2tpStatsSessionEntry 29 }
alL2tpStatsSessionOutOfWindow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object returns a count of the number of
payload packets that were received outside of the
expected window for this session."
::= { alL2tpStatsSessionEntry 30 }
alL2tpStatsSessionSendOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of payload octets
transmitted for this session."
::= { alL2tpStatsSessionEntry 31 }
alL2tpStatsSessionSendPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the total number of payload packets
transmitted for this session."
::= { alL2tpStatsSessionEntry 32 }
alL2tpStatsSessionSendZLB OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object returns the total number of Zero
Length Body acknowledgement packets transmitted
for this session."
::= { alL2tpStatsSessionEntry 33 }
alL2tpStatsSessionAckTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object returns the total number of
acknowledgement timeouts seen on payload
packets for this session."
::= { alL2tpStatsSessionEntry 34 }
alL2tpStatsSessionReassemblyTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object returns the number of reassembly
time outs that have occured for this session."
::= { alL2tpStatsSessionEntry 35 }
alL2tpStatsSessionCurrentRemoteRWS OBJECT-TYPE
SYNTAX Gauge32 (0..65535)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object contains the current remote receive
window size as determined by the local flow
control mechanism employed."
::= { alL2tpStatsSessionEntry 36 }
alL2tpStatsSessionSendSeq OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the next send sequence number
for for this session."
::= { alL2tpStatsSessionEntry 37 }
alL2tpStatsSessionSendSeqAck OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the send sequence number
that the tunnel peer has acknowledged for the
payload channel. The flow control state can be
determined by subtracting the alL2tpStatsSessionSendSeq
from alL2tpStatsSessionSendSeqAck and comparing this
value to l2tpSesssionStatsCurrentRemoteRWS."
::= { alL2tpStatsSessionEntry 38 }
alL2tpStatsSessionSendSeqResets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object contains the total number of sequence
number resets (payload packets with the R-bit set)
sent on this session."
::= { alL2tpStatsSessionEntry 39 }
alL2tpStatsSessionRecvSeq OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the next receive sequence
number expected to be received on this session."
::= { alL2tpStatsSessionEntry 40 }
alL2tpStatsSessionRecvSeqAck OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the last receive sequence
number that was acknowledged back to the tunnel
peer for the session."
::= { alL2tpStatsSessionEntry 41 }
alL2tpStatsSessionRecvSeqResets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object contains the total number of sequence
number resets (payload packets with the R-bit set)
received on this session."
::= { alL2tpStatsSessionEntry 42 }
alL2tpStatsSessionTunnelPeerIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer's IP address for the tunnel to which this
session belongs."
::= { alL2tpStatsSessionEntry 43 }
altigaL2tpStatsMibConformance OBJECT IDENTIFIER ::= { altigaL2tpStatsMibModule 1 }
altigaL2tpStatsMibCompliances OBJECT IDENTIFIER ::= { altigaL2tpStatsMibConformance 1 }
altigaL2tpStatsMibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents which
implement the Altiga L2TP Statistics MIB."
MODULE
MANDATORY-GROUPS {
altigaL2tpStatsGroup
}
::= { altigaL2tpStatsMibCompliances 1 }
altigaL2tpStatsGroup OBJECT-GROUP
OBJECTS {
alL2tpStatsLocalProtVers,
alL2tpStatsVendorName,
alL2tpStatsFirmwareRev,
alL2tpStatsTotalTunnels,
alL2tpStatsFailedTunnels,
alL2tpStatsFailedAuthentications,
alL2tpStatsActiveTunnels,
alL2tpStatsMaxTunnels,
alL2tpStatsTotalSessions,
alL2tpStatsFailedSessions,
alL2tpStatsActiveSessions,
alL2tpStatsMaxSessions,
alL2tpStatsControlRecvOctets,
alL2tpStatsControlRecvPackets,
alL2tpStatsControlRecvDiscards,
alL2tpStatsControlSendOctets,
alL2tpStatsControlSendPackets,
alL2tpStatsPayloadRecvOctets,
alL2tpStatsPayloadRecvPackets,
alL2tpStatsPayloadRecvDiscards,
alL2tpStatsPayloadSendOctets,
alL2tpStatsPayloadSendPackets,
alL2tpStatsTunnelRowStatus,
alL2tpStatsTunnelPeerIpAddr,
alL2tpStatsTunnelLocalTID,
alL2tpStatsTunnelRemoteTID,
alL2tpStatsTunnelState,
alL2tpStatsTunnelInitiated,
alL2tpStatsTunnelRemoteHostName,
alL2tpStatsTunnelRemoteVendorName,
alL2tpStatsTunnelRemoteFirmwareRevision,
alL2tpStatsTunnelRemoteProtocolVersion,
alL2tpStatsTunnelInitialRemoteRWS,
alL2tpStatsTunnelBearerCapabilities,
alL2tpStatsTunnelFramingCapabilities,
alL2tpStatsTunnelControlRecvPackets,
alL2tpStatsTunnelControlRecvDiscards,
alL2tpStatsTunnelControlRecvZLB,
alL2tpStatsTunnelControlOutOfSequence,
alL2tpStatsTunnelControlOutOfWindow,
alL2tpStatsTunnelControlSendPackets,
alL2tpStatsTunnelControlSendZLB,
alL2tpStatsTunnelControlAckTimeouts,
alL2tpStatsTunnelCurrentRemoteRWS,
alL2tpStatsTunnelSendSeq,
alL2tpStatsTunnelSendSeqAck,
alL2tpStatsTunnelRecvSeq,
alL2tpStatsTunnelRecvSeqAck,
alL2tpStatsTunnelTotalSessions,
alL2tpStatsTunnelFailedSessions,
alL2tpStatsTunnelActiveSessions,
alL2tpStatsTunnelLastResultCode,
alL2tpStatsTunnelLastErrorCode,
alL2tpStatsTunnelLastErrorMessage,
alL2tpStatsSessionRowStatus,
alL2tpStatsSessionIfIndex,
alL2tpStatsSessionTID,
alL2tpStatsSessionLocalCID,
alL2tpStatsSessionRemoteCID,
alL2tpStatsSessionUserName,
alL2tpStatsSessionState,
alL2tpStatsSessionCallType,
alL2tpStatsSessionCallSerialNumber,
alL2tpStatsSessionTxConnectSpeed,
alL2tpStatsSessionRxConnectSpeed,
alL2tpStatsSessionCallBearerType,
alL2tpStatsSessionFramingType,
alL2tpStatsSessionPhysChanId,
alL2tpStatsSessionDNIS,
alL2tpStatsSessionCLID,
alL2tpStatsSessionSubAddress,
alL2tpStatsSessionPrivateGroupID,
alL2tpStatsSessionProxyLcp,
alL2tpStatsSessionAuthMethod,
alL2tpStatsSessionRemotePPD,
alL2tpStatsSessionSequencingState,
alL2tpStatsSessionRecvOctets,
alL2tpStatsSessionRecvPackets,
alL2tpStatsSessionRecvDiscards,
alL2tpStatsSessionOutSequence,
alL2tpStatsSessionSendOctets,
alL2tpStatsSessionSendPackets,
alL2tpStatsSessionReassemblyTimeouts,
alL2tpStatsSessionSendSeq,
alL2tpStatsSessionSendSeqAck,
alL2tpStatsSessionRecvSeq,
alL2tpStatsSessionRecvSeqAck,
alL2tpStatsSessionTunnelPeerIpAddr
}
STATUS current
DESCRIPTION
"The objects for L2TP statistics."
::= { alL2tpGroup 2 }
altigaL2tpStatsDepGroup OBJECT-GROUP
OBJECTS {
alL2tpStatsSessionLocalRWS,
alL2tpStatsSessionRemoteInitialRWS,
alL2tpStatsSessionRecvZLB,
alL2tpStatsSessionSendZLB,
alL2tpStatsSessionOutOfWindow,
alL2tpStatsSessionAckTimeouts,
alL2tpStatsSessionCurrentRemoteRWS,
alL2tpStatsSessionSendSeqResets,
alL2tpStatsSessionRecvSeqResets
}
STATUS deprecated
DESCRIPTION
"The deprecated objects for L2TP statistics."
::= { alL2tpGroup 3 }
END
Reference in New Issue View Git Blame Copy Permalink