mirror of
https://github.com/librenms/librenms.git
synced 2024-10-07 16:52:45 +00:00
1782 lines
50 KiB
Plaintext
1782 lines
50 KiB
Plaintext
CISCOSB-IpRouter DEFINITIONS ::= BEGIN
|
|
|
|
-- Title: CISCOSB IP Router Private Extension
|
|
-- Version: 7.50.00.00
|
|
-- Date: 30 Nov 2010
|
|
|
|
IMPORTS
|
|
rip2Spec, ipRedundancy, ipRouteLeaking, ipRipFilter,
|
|
rlIpRoutingProtPreference, rlOspf, ipSpec FROM CISCOSB-IP
|
|
rip2IfConfEntry FROM RIPv2-MIB
|
|
ospfIfEntry, AreaID, RouterID, ospfVirtIfEntry FROM OSPF-MIB
|
|
Unsigned32, Integer32, Counter32, IpAddress,
|
|
MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI
|
|
DisplayString, RowStatus, TruthValue,
|
|
TEXTUAL-CONVENTION FROM SNMPv2-TC;
|
|
|
|
|
|
|
|
rlIpRouter MODULE-IDENTITY
|
|
LAST-UPDATED "200406010000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
|
|
CONTACT-INFO
|
|
"Postal: 170 West Tasman Drive
|
|
San Jose , CA 95134-1706
|
|
USA
|
|
|
|
|
|
Website: Cisco Small Business Support Community <http://www.cisco.com/go/smallbizsupport>"
|
|
|
|
DESCRIPTION
|
|
"The private MIB module definition for switch001 router MIB."
|
|
REVISION "200406010000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB."
|
|
::= { ipSpec 18 }
|
|
|
|
|
|
|
|
|
|
--
|
|
-- RIP
|
|
--
|
|
|
|
rsRip2IfConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RsRip2IfConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is extension of rip2IfConfTable (RFC 1724 ,RIP 2)"
|
|
::= { rip2Spec 1 }
|
|
|
|
rsRip2IfConfEntry OBJECT-TYPE
|
|
SYNTAX RsRip2IfConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The row definition for this table."
|
|
INDEX { rsRip2IfConfAddress }
|
|
::= { rsRip2IfConfTable 1 }
|
|
|
|
RsRip2IfConfEntry ::= SEQUENCE {
|
|
rsRip2IfConfAddress IpAddress,
|
|
rsRip2IfConfVirtualDis INTEGER,
|
|
rlRip2IfConfKeyChain DisplayString,
|
|
rlRip2IfConfAdminStatus INTEGER,
|
|
rlRip2IfConfInFilteringType INTEGER,
|
|
rlRip2IfConfOutFilteringType INTEGER,
|
|
rlRip2IfConfInFilterListName DisplayString,
|
|
rlRip2IfConfOutFilterListName DisplayString,
|
|
rlRip2IfConfDefInfOriginate INTEGER
|
|
}
|
|
|
|
rsRip2IfConfAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The IP Address of this system on the indicated subnet. "
|
|
::= { rsRip2IfConfEntry 1 }
|
|
|
|
|
|
rsRip2IfConfVirtualDis OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable defines the virtual number of hops assigned to
|
|
the interface specified by rsIfIpAddrIndex. This enables
|
|
fine-tuning of the RIP routing algorithm."
|
|
DEFVAL { 1 }
|
|
::= { rsRip2IfConfEntry 2 }
|
|
|
|
rlRip2IfConfKeyChain OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the key-chain which rip2
|
|
interface uses for md5 authentication"
|
|
::= { rsRip2IfConfEntry 3 }
|
|
|
|
rlRip2IfConfAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable defines administrative status of RIP interface. "
|
|
DEFVAL {enable}
|
|
::= { rsRip2IfConfEntry 4 }
|
|
|
|
rlRip2IfConfInFilteringType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
stdIpAcl (2),
|
|
pefixList (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of Rx filtering (ACL, Prefix List etc)."
|
|
DEFVAL {none}
|
|
::= { rsRip2IfConfEntry 5 }
|
|
|
|
rlRip2IfConfOutFilteringType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none (1),
|
|
stdIpAcl (2),
|
|
pefixList (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of Tx filtering (ACL, Prefix List etc)."
|
|
DEFVAL {none}
|
|
::= { rsRip2IfConfEntry 6 }
|
|
|
|
rlRip2IfConfInFilterListName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of a filtering list. The list defines
|
|
which networks are to be received and which
|
|
are to be suppressed in routing updates.
|
|
List type is defined by rlRip2IfConfFilteringType."
|
|
::= { rsRip2IfConfEntry 7 }
|
|
|
|
rlRip2IfConfOutFilterListName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of a filtering list. The list defines
|
|
which networks are to be sent and which
|
|
are to be suppressed.
|
|
List type is defined by rlRip2IfConfFilteringType."
|
|
::= { rsRip2IfConfEntry 8 }
|
|
|
|
rlRip2IfConfDefInfOriginate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
global (1),
|
|
disabled (2),
|
|
enabled (3),
|
|
passiveOnly (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"if set to global RIP behavior is specified by the value of
|
|
rlRip2GlobalDefaultInformationOriginate scalar
|
|
if set to enabled RIP will advertise default route on this interfaces
|
|
if set to passiveOnly RIP will advertise default route on this interfaces
|
|
only if it is configured to passive mode"
|
|
DEFVAL { global }
|
|
::= { rsRip2IfConfEntry 9 }
|
|
|
|
|
|
rlRip2MibVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MIB's version, the current version is 2."
|
|
::= { rip2Spec 2 }
|
|
|
|
rlRip2RedistDefaultMetric OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Default metric value when RIP advertises routes,
|
|
derived by other protocols."
|
|
DEFVAL { 1 }
|
|
::= { rip2Spec 3 }
|
|
|
|
rlRip2RedistStaticTransparent OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to TRUE causes RIP to use the routing table metric
|
|
for redistributed static routes as the RIP metric.
|
|
If set to FALSE then the metric defined in
|
|
rlRip2RedistDefaultMetric is used."
|
|
DEFVAL { false }
|
|
::= { rip2Spec 4 }
|
|
|
|
rlRip2ClearStatistics OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Clears RIP statistics counters of all interfaces and all peers."
|
|
DEFVAL { false }
|
|
::= { rip2Spec 5 }
|
|
|
|
rlRip2IfConfGlobalPassiveInterface OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"if set to TRUE all interfaces created will be created as passive (rip2IfConfSend = doNotSend)"
|
|
DEFVAL { false }
|
|
::= { rip2Spec 6 }
|
|
|
|
|
|
rlRip2GlobalDefInfOriginate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled (1),
|
|
enabled (2),
|
|
passiveOnly (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"if set to Enabled RIP will advertise default route on all RIP interfaces
|
|
if set to PassiveOnly RIP will advertise default route on all RIP passive interfaces"
|
|
DEFVAL { disabled }
|
|
::= { rip2Spec 7 }
|
|
|
|
rlRip2RedistConnected OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to TRUE causes RIP to redistribute
|
|
directly connected interfaces, on which RIP is not enabled."
|
|
DEFVAL { false }
|
|
::= { rip2Spec 8 }
|
|
|
|
rlRip2RedistConnectedTransparent OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If set to TRUE causes RIP to use the routing table metric
|
|
for redistributed connected routes as the RIP metric.
|
|
If set to FALSE then the metric defined in
|
|
rlRip2RedistDefaultMetric is used."
|
|
DEFVAL { false }
|
|
::= { rip2Spec 9 }
|
|
|
|
rlRip2RedistConnectedMetric OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"User defined metric value when RIP advertises
|
|
directly connected interfaces, on which RIP is not enabled."
|
|
DEFVAL { 0 }
|
|
::= { rip2Spec 10 }
|
|
|
|
--
|
|
-- CISCOSB Private IP Router Redundancy
|
|
--
|
|
|
|
ipRedundAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter controls the IP Redundancy in the device.
|
|
In case the parameter is Enable and the other router
|
|
becomes inoperational, all the traffic is handled by
|
|
this element."
|
|
DEFVAL {disable }
|
|
::= { ipRedundancy 1 }
|
|
|
|
ipRedundOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
inactive(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" obsolete "
|
|
DEFVAL {inactive}
|
|
::= { ipRedundancy 2 }
|
|
|
|
ipRedundRoutersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpRedundRoutersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of IP addresses backed up by this router."
|
|
::= {ipRedundancy 3 }
|
|
|
|
ipRedundRoutersEntry OBJECT-TYPE
|
|
SYNTAX IpRedundRoutersEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The row definition for this table."
|
|
INDEX {ipRedundRoutersIfAddr, ipRedundRoutersMainRouterAddr}
|
|
::= {ipRedundRoutersTable 1 }
|
|
|
|
IpRedundRoutersEntry ::= SEQUENCE {
|
|
ipRedundRoutersIfAddr IpAddress,
|
|
ipRedundRoutersMainRouterAddr IpAddress,
|
|
ipRedundRoutersOperStatus INTEGER,
|
|
ipRedundRoutersPollInterval INTEGER,
|
|
ipRedundRoutersTimeout INTEGER,
|
|
ipRedundRoutersStatus INTEGER
|
|
}
|
|
|
|
ipRedundRoutersIfAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Ip address of the IP interface on which the redundancy feature
|
|
is operational."
|
|
::= { ipRedundRoutersEntry 1}
|
|
|
|
ipRedundRoutersMainRouterAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Ip address of the polled main router."
|
|
::= { ipRedundRoutersEntry 2}
|
|
|
|
ipRedundRoutersOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { active(1), inactive(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If active, the main router is considered inoperational and the IP
|
|
interface operates as its backup."
|
|
::= { ipRedundRoutersEntry 3 }
|
|
|
|
ipRedundRoutersPollInterval OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Polling interval for this router (in seconds). If 0 the router is not
|
|
polled."
|
|
DEFVAL { 3 }
|
|
::= { ipRedundRoutersEntry 4 }
|
|
|
|
ipRedundRoutersTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Interval in seconds during which the backed-up router must signal.
|
|
If it does not signal, it is considered inoperational and the IP
|
|
interface starts operating as backup."
|
|
DEFVAL { 12 }
|
|
::= { ipRedundRoutersEntry 5}
|
|
|
|
ipRedundRoutersStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
active(1),
|
|
notInService(2),
|
|
notReady(3),
|
|
createAndGo(4),
|
|
createAndWait(5),
|
|
destroy(6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry status"
|
|
::= { ipRedundRoutersEntry 6}
|
|
|
|
--
|
|
-- IP Routing Protol leaking
|
|
--
|
|
|
|
ipLeakStaticToRip OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter controls leaking (redistribution) of static routes
|
|
to RIP. When enabled, all routes inserted to the IP routing table
|
|
via SNMP are advertised into RIP."
|
|
DEFVAL {enable}
|
|
::= { ipRouteLeaking 1 }
|
|
|
|
ipLeakStaticToOspf OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter controls leaking (redistribution) of static routes
|
|
into OSPF. When enabled, all routes inserted to the IP routing table
|
|
via SNMP are advertised into OSPF as external routes."
|
|
DEFVAL {enable}
|
|
::= { ipRouteLeaking 2 }
|
|
|
|
ipLeakOspfToRip OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter controls leaking (redistribution) of routes
|
|
from OSPF to RIP. If enabled, all routes learned via OSPF
|
|
are advertised into RIP."
|
|
DEFVAL {disable}
|
|
::= { ipRouteLeaking 3 }
|
|
|
|
ipLeakRipToOspf OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter controls leaking (redistribution) of routes
|
|
from RIP to OSPF. If enabled, all routes learned via RIP
|
|
are advertised into OSPF as external routes."
|
|
DEFVAL {disable}
|
|
::= { ipRouteLeaking 4 }
|
|
|
|
ipLeakExtDirectToOspf OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This parameter controls leaking (redistribution) into OSPF of
|
|
direct routes external to OSPF, i.e. routes to local network
|
|
corresponding to IP interfaces on which OSPF is disabled.
|
|
When enabled, all such direct routes are advertised into OSPF
|
|
as external routes."
|
|
DEFVAL {enable}
|
|
::= { ipRouteLeaking 5 }
|
|
|
|
--
|
|
-- RIP Filters
|
|
--
|
|
|
|
-- Global RIP filter is defined per IP router.
|
|
|
|
rsIpRipFilterGlbTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RsIpRipFilterGlbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table of RIP global filters per IP router."
|
|
::= { ipRipFilter 1 }
|
|
|
|
rsIpRipFilterGlbEntry OBJECT-TYPE
|
|
SYNTAX RsIpRipFilterGlbEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" An entry in the RIP global filter table "
|
|
INDEX { rsIpRipFilterGlbType,
|
|
rsIpRipFilterGlbNumber }
|
|
::= { rsIpRipFilterGlbTable 1 }
|
|
|
|
RsIpRipFilterGlbEntry ::= SEQUENCE {
|
|
rsIpRipFilterGlbType INTEGER,
|
|
rsIpRipFilterGlbNumber INTEGER,
|
|
rsIpRipFilterGlbStatus INTEGER,
|
|
rsIpRipFilterGlbIpAddr IpAddress,
|
|
rsIpRipFilterGlbNetworkMaskBits INTEGER,
|
|
rsIpRipFilterGlbMatchBits INTEGER,
|
|
rsIpRipFilterGlbAction INTEGER
|
|
}
|
|
|
|
rsIpRipFilterGlbType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
input(1),
|
|
output(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Type of filter - input/output "
|
|
::= {rsIpRipFilterGlbEntry 1}
|
|
|
|
rsIpRipFilterGlbNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Number of RIP filter. "
|
|
::= {rsIpRipFilterGlbEntry 2}
|
|
|
|
rsIpRipFilterGlbStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid (1),
|
|
invalid (2),
|
|
underCreation (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The validity of this entry. Setting this value to invalid deletes
|
|
the entry, and the entry may be actualy removed from the table."
|
|
DEFVAL { valid }
|
|
::= {rsIpRipFilterGlbEntry 3}
|
|
|
|
rsIpRipFilterGlbIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" network prefix IP address, as in the forwarding table. "
|
|
DEFVAL {'00000000'H}
|
|
::= {rsIpRipFilterGlbEntry 4}
|
|
|
|
rsIpRipFilterGlbNetworkMaskBits OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" the number of bits in the IP Network mask, called network-prefix-length
|
|
in Router Requirements terminology. for example: the value 16 means
|
|
mask 255.255.0.0 "
|
|
DEFVAL {0}
|
|
::= {rsIpRipFilterGlbEntry 5}
|
|
|
|
rsIpRipFilterGlbMatchBits OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" the number of bits to match in the Network IP address. A value
|
|
smaller than 32 defines a wildcard. for example: the value 8 means
|
|
all routes whose leftmost 8 bits are equal to those of the network IP
|
|
address. If this variable has a value other than 32, than
|
|
rsIpRipFilterGlbNetworkMaskBits must be 0 and is ignored. "
|
|
DEFVAL {32}
|
|
::= {rsIpRipFilterGlbEntry 6}
|
|
|
|
rsIpRipFilterGlbAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
deny(1),
|
|
permit(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Filter action - permit/deny for this network"
|
|
DEFVAL { permit }
|
|
::= {rsIpRipFilterGlbEntry 7}
|
|
|
|
|
|
-- Intf RIP filter is defined per IP Interface
|
|
|
|
rsIpRipFilterLclTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RsIpRipFilterLclEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of input/output RIP filters used per IP Interface."
|
|
::= { ipRipFilter 2 }
|
|
|
|
rsIpRipFilterLclEntry OBJECT-TYPE
|
|
SYNTAX RsIpRipFilterLclEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" An entry in the Intf RIP filter table"
|
|
INDEX {rsIpRipFilterLclIpIntf,
|
|
rsIpRipFilterLclType,
|
|
rsIpRipFilterLclNumber}
|
|
::= { rsIpRipFilterLclTable 1 }
|
|
|
|
RsIpRipFilterLclEntry ::= SEQUENCE {
|
|
rsIpRipFilterLclIpIntf IpAddress,
|
|
rsIpRipFilterLclType INTEGER,
|
|
rsIpRipFilterLclNumber INTEGER,
|
|
rsIpRipFilterLclStatus INTEGER,
|
|
rsIpRipFilterLclIpAddr IpAddress,
|
|
rsIpRipFilterLclNetworkMaskBits INTEGER,
|
|
rsIpRipFilterLclMatchBits INTEGER,
|
|
rsIpRipFilterLclAction INTEGER
|
|
}
|
|
|
|
rsIpRipFilterLclIpIntf OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The IP address identifying the RIP interface for this filter.
|
|
This value corresponds to rsIpAdEntAddr. "
|
|
::= {rsIpRipFilterLclEntry 1}
|
|
|
|
|
|
rsIpRipFilterLclType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
input(1),
|
|
output(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Type of filter - input/output "
|
|
::= {rsIpRipFilterLclEntry 2}
|
|
|
|
rsIpRipFilterLclNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Number of RIP filter for this Interface"
|
|
::= {rsIpRipFilterLclEntry 3}
|
|
|
|
rsIpRipFilterLclStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid (1),
|
|
invalid (2),
|
|
underCreation (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The validity of this entry. Setting this value to invalid deletes
|
|
the entry, and the entry may be actualy removed from the table."
|
|
DEFVAL { valid }
|
|
::= {rsIpRipFilterLclEntry 4}
|
|
|
|
rsIpRipFilterLclIpAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" network prefix IP address, as in the forwarding table. "
|
|
DEFVAL {'00000000'H}
|
|
::= {rsIpRipFilterLclEntry 5}
|
|
|
|
rsIpRipFilterLclNetworkMaskBits OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" the number of bits in the IP Network mask, called network-prefix-length
|
|
in Router Requirements terminology. for example: the value 16 means
|
|
mask 255.255.0.0 "
|
|
DEFVAL {0}
|
|
::= {rsIpRipFilterLclEntry 6}
|
|
|
|
rsIpRipFilterLclMatchBits OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" the number of bits to match in the Network IP address. A value
|
|
smaller than 32 defines a wildcard. for example: the value 8 means
|
|
all routes whose leftmost 8 bits are equal to those of the network IP
|
|
address. If this variable has a value other than 32, than
|
|
rsIpRipFilterLclNetworkMaskBits must be 0 and is ignored. "
|
|
DEFVAL {32}
|
|
::= {rsIpRipFilterLclEntry 7}
|
|
|
|
rsIpRipFilterLclAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
deny(1),
|
|
permit(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Filter action - permit/deny "
|
|
DEFVAL { permit }
|
|
::= {rsIpRipFilterLclEntry 8}
|
|
|
|
--
|
|
-- Ip Routing Protocol Preference
|
|
--
|
|
|
|
-- Mib for Preferance among routing protocols:
|
|
-- Range value 0..255 . O is most preferred, 255 never used for forwarding.
|
|
-- only exception is direct which range 0..254 we prevent direct from becoming unreachable
|
|
-- (according to RFC1812 section 5.2.4)
|
|
|
|
rlIpRoutingProtPreferenceDirect OBJECT-TYPE
|
|
SYNTAX INTEGER (0..254)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Preference given to routes whose origin is Local
|
|
IP (i.e. IP interface in IpAddrTable)
|
|
It is proposed that the value will be higher than dynamic routing protocols.
|
|
The change of its value may lead to unexpected results, such as routing loops"
|
|
DEFVAL { 20 }
|
|
::= {rlIpRoutingProtPreference 1}
|
|
|
|
rlIpRoutingProtPreferenceStatic OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Preference given to routes whose origin is Men configured by
|
|
Net managment tools, i.e. Command line or SNMP configured."
|
|
DEFVAL { 10 }
|
|
::= {rlIpRoutingProtPreference 2}
|
|
|
|
-- For OSPF:
|
|
rlIpRoutingProtPreferenceOspfInter OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Preference given to routes whose origin is internal
|
|
ospf Links.
|
|
Relate to routes which are based on
|
|
OSPF Link State Advertisements of type 1-4"
|
|
DEFVAL { 30 }
|
|
::= {rlIpRoutingProtPreference 3}
|
|
|
|
rlIpRoutingProtPreferenceOspfExt OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Preference given to routes whose origin is external to OSPF
|
|
i.e. routes imported by as OSPF AS Border router.
|
|
Relate to routes which are based on
|
|
OSPF Link State Advertisements of types 5 and 7"
|
|
DEFVAL { 60 }
|
|
::= {rlIpRoutingProtPreference 4}
|
|
|
|
rlIpRoutingProtPreferenceOspfReject OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Preference given to routes whose origin is OSPF
|
|
and Are inserted to cover gaps in net range"
|
|
DEFVAL { 254 }
|
|
::= {rlIpRoutingProtPreference 5}
|
|
|
|
|
|
--For Rip
|
|
rlIpRoutingProtPreferenceRipNormal OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Preference given to routes whose origin is RIP
|
|
routing domain"
|
|
DEFVAL { 60 }
|
|
::= {rlIpRoutingProtPreference 6}
|
|
|
|
rlIpRoutingProtPreferenceRipAggregate OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Preference given to routes whose origin is aggregation
|
|
As a method of rip1 to handle the CIDR schema.
|
|
The idea is that ripv1 aggregates route which fall into certion
|
|
class of IP. This route is a discard route in effect,
|
|
and is referenced, at forwarding route look up, if there is no beter
|
|
match. (which means the route is not available)"
|
|
DEFVAL { 254 }
|
|
::= {rlIpRoutingProtPreference 7}
|
|
|
|
rlIpRoutingProtPreferenceBgp OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Preference given to routes whose origin is
|
|
BGP ROUTERS (EBGP or IBGP)"
|
|
DEFVAL { 80 }
|
|
::= {rlIpRoutingProtPreference 8}
|
|
|
|
-- We may use it in the future to control
|
|
-- the time scalars new values take effect
|
|
-- rlRoutePrefChangeTakeEffectAT OBJECT-TYPE
|
|
-- SYNTAX INTEGER {
|
|
-- afterReset (1),
|
|
-- immediate (2)
|
|
-- }
|
|
-- MAX-ACCESS read-write
|
|
-- STATUS current
|
|
-- DESCRIPTION
|
|
-- "The time the changes to preference of protocols will become in effect.
|
|
-- options are:
|
|
-- 1. At run time.
|
|
-- 2. after rebboting the devise
|
|
-- default value 2 to avoid masive routing change at run time
|
|
-- "
|
|
-- DEFVAL { afterReset }
|
|
-- ::= {rlIpRoutingProtPreference 9}
|
|
|
|
--
|
|
-- OSPF
|
|
--
|
|
|
|
rlOspfMibVersion OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"MIB's version, the current version is 1."
|
|
::= { rlOspf 1 }
|
|
|
|
rlOspfAutoInterfaceCreation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
enable (1),
|
|
disable (2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable controls OSPF automatic creation and activation of
|
|
interfaces. If value is enable - IP interface creation results in
|
|
creation and activation of OSPF Interface. If value is disable
|
|
OSPF interface is created but not activated.
|
|
The option is a platform parameter."
|
|
::= { rlOspf 2 }
|
|
|
|
|
|
--Extention to ospfIfTable
|
|
|
|
rlOspfIfExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfIfExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF Interface Table describes the
|
|
interfaces from the viewpoint of OSPF."
|
|
::= { rlOspf 3 }
|
|
|
|
rlOspfIfExtEntry OBJECT-TYPE
|
|
SYNTAX RlOspfIfExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF interface table extension
|
|
for md5 authentication"
|
|
AUGMENTS { ospfIfEntry }
|
|
::= { rlOspfIfExtTable 1 }
|
|
|
|
RlOspfIfExtEntry ::= SEQUENCE {
|
|
rlOspfifKeyChain DisplayString
|
|
}
|
|
|
|
rlOspfifKeyChain OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the key-chain which ospf
|
|
interface uses for md5 authentication"
|
|
::= { rlOspfIfExtEntry 1 }
|
|
|
|
-- OSPF Link State Advertisements
|
|
|
|
-- OSPF Router LSA
|
|
|
|
rlOspfRtrLnkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfRtrLnkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Router Link State Advertisement."
|
|
::= { rlOspf 4 }
|
|
|
|
|
|
rlOspfRtrLnkEntry OBJECT-TYPE
|
|
SYNTAX RlOspfRtrLnkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single entry from Router LSA."
|
|
INDEX { rlOspfRtrLnkAreaId, rlOspfRtrLnkLsid,
|
|
rlOspfRtrLnkRouterId, rlOspfRtrLnkIdx }
|
|
::= { rlOspfRtrLnkTable 1 }
|
|
|
|
RlOspfRtrLnkEntry ::=
|
|
SEQUENCE {
|
|
rlOspfRtrLnkAreaId
|
|
AreaID,
|
|
rlOspfRtrLnkLsid
|
|
IpAddress,
|
|
rlOspfRtrLnkRouterId
|
|
RouterID,
|
|
rlOspfRtrLnkIdx
|
|
Unsigned32,
|
|
rlOspfRtrLnkSequence
|
|
Integer32,
|
|
rlOspfRtrLnkAge
|
|
Integer32,
|
|
rlOspfRtrLnkChecksum
|
|
Integer32,
|
|
rlOspfRtrLnkLength
|
|
Unsigned32,
|
|
rlOspfRtrLnkBitV
|
|
INTEGER,
|
|
rlOspfRtrLnkBitE
|
|
INTEGER,
|
|
rlOspfRtrLnkBitB
|
|
INTEGER,
|
|
rlOspfRtrLnkLinks
|
|
Unsigned32,
|
|
rlOspfRtrLnkLinkID
|
|
IpAddress,
|
|
rlOspfRtrLnkLinkData
|
|
IpAddress,
|
|
rlOspfRtrLnkType
|
|
INTEGER,
|
|
rlOspfRtrLnkMetric
|
|
Unsigned32
|
|
}
|
|
|
|
rlOspfRtrLnkAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit identifier of the Area from which
|
|
the LSA was received."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rlOspfRtrLnkEntry 1 }
|
|
|
|
rlOspfRtrLnkLsid OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Link State ID is an LS Type Specific field
|
|
containing either a Router ID or an IP Address;
|
|
it identifies the piece of the routing domain
|
|
that is being described by the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.4 Link State ID"
|
|
::= { rlOspfRtrLnkEntry 2 }
|
|
|
|
rlOspfRtrLnkRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { rlOspfRtrLnkEntry 3 }
|
|
|
|
rlOspfRtrLnkIdx OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1.. 65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index is a unsigned 32-bit integer.
|
|
It is used as sequence number of entry
|
|
in the LSA and relevant only for Router
|
|
or Network LSA which can contain
|
|
unlimited number of entries."
|
|
::= { rlOspfRtrLnkEntry 4 }
|
|
|
|
rlOspfRtrLnkSequence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number field is a signed 32-bit
|
|
integer. It is used to detect old and duplicate
|
|
link state advertisements. The space of sequence
|
|
numbers is linearly ordered. The larger the
|
|
sequence number the more recent the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.6 LS sequence number"
|
|
::= { rlOspfRtrLnkEntry 5 }
|
|
|
|
|
|
rlOspfRtrLnkAge OBJECT-TYPE
|
|
SYNTAX Integer32 -- Should be 0..MaxAge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the age of the link state
|
|
advertisement in seconds."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.1 LS age"
|
|
::= { rlOspfRtrLnkEntry 6 }
|
|
|
|
rlOspfRtrLnkChecksum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the checksum of the complete contents
|
|
of the advertisement, excepting the age field.
|
|
The age field is excepted so that an advertisement's
|
|
age can be incremented without updating the checksum.
|
|
The checksum used is the same that is used for ISO
|
|
connectionless datagrams; it is commonly referred
|
|
to as the Fletcher checksum."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.7 LS checksum"
|
|
::= { rlOspfRtrLnkEntry 7 }
|
|
|
|
rlOspfRtrLnkLength OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lenth in bytes of the LSA.
|
|
This includes the 20 byte LSA header."
|
|
::= { rlOspfRtrLnkEntry 8 }
|
|
|
|
rlOspfRtrLnkBitV OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set, the router is an endpoint
|
|
of one or more fully adjacent virtual
|
|
links having the described area as Transit
|
|
area (V is for virtual link endpoint)."
|
|
::= { rlOspfRtrLnkEntry 9 }
|
|
|
|
rlOspfRtrLnkBitE OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set, the router is an AS
|
|
boundary router (E is for external)."
|
|
::= { rlOspfRtrLnkEntry 10 }
|
|
|
|
rlOspfRtrLnkBitB OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When set, the router is an area
|
|
border router (B is for border)."
|
|
::= { rlOspfRtrLnkEntry 11 }
|
|
|
|
rlOspfRtrLnkLinks OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of router links described in this LSA.
|
|
This must be the total collection of router links
|
|
(i.e., interfaces) to the area."
|
|
::= { rlOspfRtrLnkEntry 12 }
|
|
|
|
rlOspfRtrLnkLinkID OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies the object that this router link
|
|
connects to. Value depends on the link's Type."
|
|
::= { rlOspfRtrLnkEntry 13 }
|
|
|
|
rlOspfRtrLnkLinkData OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Value depends on the link's Type field."
|
|
::= { rlOspfRtrLnkEntry 14 }
|
|
|
|
rlOspfRtrLnkType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pointToPoint(1),
|
|
transitNetwork(2),
|
|
stubNetwork(3),
|
|
virtualLink(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A quick description of the router link."
|
|
::= { rlOspfRtrLnkEntry 15 }
|
|
|
|
rlOspfRtrLnkMetric OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The cost of using this router link."
|
|
::= { rlOspfRtrLnkEntry 16 }
|
|
|
|
-- OSPF Network LSA
|
|
|
|
rlOspfNetLnkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfNetLnkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Network Link State Advertisement."
|
|
::= { rlOspf 5 }
|
|
|
|
rlOspfNetLnkEntry OBJECT-TYPE
|
|
SYNTAX RlOspfNetLnkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single entry from Network LSA."
|
|
INDEX { rlOspfNetLnkAreaId, rlOspfNetLnkLsid,
|
|
rlOspfNetLnkRouterId, rlOspfNetLnkIdx }
|
|
::= { rlOspfNetLnkTable 1 }
|
|
|
|
RlOspfNetLnkEntry ::=
|
|
SEQUENCE {
|
|
rlOspfNetLnkAreaId
|
|
AreaID,
|
|
rlOspfNetLnkLsid
|
|
IpAddress,
|
|
rlOspfNetLnkRouterId
|
|
RouterID,
|
|
rlOspfNetLnkIdx
|
|
Unsigned32,
|
|
rlOspfNetLnkSequence
|
|
Integer32,
|
|
rlOspfNetLnkAge
|
|
Integer32,
|
|
rlOspfNetLnkChecksum
|
|
Integer32,
|
|
rlOspfNetLnkLength
|
|
Unsigned32,
|
|
rlOspfNetLnkMask
|
|
IpAddress,
|
|
rlOspfNetLnkAttRouter
|
|
IpAddress
|
|
}
|
|
|
|
rlOspfNetLnkAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit identifier of the Area from which
|
|
the LSA was received."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rlOspfNetLnkEntry 1 }
|
|
|
|
rlOspfNetLnkLsid OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Link State ID is an LS Type Specific field
|
|
containing either a Router ID or an IP Address;
|
|
it identifies the piece of the routing domain
|
|
that is being described by the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.4 Link State ID"
|
|
::= { rlOspfNetLnkEntry 2 }
|
|
|
|
rlOspfNetLnkRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { rlOspfNetLnkEntry 3 }
|
|
|
|
rlOspfNetLnkIdx OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1.. 65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The index is a unsigned 32-bit integer.
|
|
It is used as sequence number of entry
|
|
in the LSA and relevant only for Router
|
|
or Network LSA which can contain
|
|
unlimited number of entries."
|
|
::= { rlOspfNetLnkEntry 4 }
|
|
|
|
rlOspfNetLnkSequence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number field is a signed 32-bit
|
|
integer. It is used to detect old and duplicate
|
|
link state advertisements. The space of sequence
|
|
numbers is linearly ordered. The larger the
|
|
sequence number the more recent the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.6 LS sequence number"
|
|
::= { rlOspfNetLnkEntry 5 }
|
|
|
|
|
|
rlOspfNetLnkAge OBJECT-TYPE
|
|
SYNTAX Integer32 -- Should be 0..MaxAge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the age of the link state
|
|
advertisement in seconds."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.1 LS age"
|
|
::= { rlOspfNetLnkEntry 6 }
|
|
|
|
rlOspfNetLnkChecksum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the checksum of the complete contents
|
|
of the advertisement, excepting the age field.
|
|
The age field is excepted so that an advertisement's
|
|
age can be incremented without updating the checksum.
|
|
The checksum used is the same that is used for ISO
|
|
connectionless datagrams; it is commonly referred
|
|
to as the Fletcher checksum."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.7 LS checksum"
|
|
::= { rlOspfNetLnkEntry 7 }
|
|
|
|
rlOspfNetLnkLength OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lenth in bytes of the LSA.
|
|
This includes the 20 byte LSA header."
|
|
::= { rlOspfNetLnkEntry 8 }
|
|
|
|
rlOspfNetLnkMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The IP address mask for the network."
|
|
::= { rlOspfNetLnkEntry 9 }
|
|
|
|
rlOspfNetLnkAttRouter OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Router IDs of each of the routers
|
|
attached to the network."
|
|
::= { rlOspfNetLnkEntry 10 }
|
|
|
|
-- OSPF Summary LSA (Type 3)
|
|
|
|
rlOspfSumLnkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfSumLnkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Summary Link State Advertisement
|
|
for network (Type 3)."
|
|
::= { rlOspf 6 }
|
|
|
|
|
|
rlOspfSumLnkEntry OBJECT-TYPE
|
|
SYNTAX RlOspfSumLnkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single entry from Summary LSA."
|
|
INDEX { rlOspfSumLnkAreaId, rlOspfSumLnkLsid,
|
|
rlOspfSumLnkRouterId}
|
|
::= { rlOspfSumLnkTable 1 }
|
|
|
|
RlOspfSumLnkEntry ::=
|
|
SEQUENCE {
|
|
rlOspfSumLnkAreaId
|
|
AreaID,
|
|
rlOspfSumLnkLsid
|
|
IpAddress,
|
|
rlOspfSumLnkRouterId
|
|
RouterID,
|
|
rlOspfSumLnkSequence
|
|
Integer32,
|
|
rlOspfSumLnkAge
|
|
Integer32,
|
|
rlOspfSumLnkChecksum
|
|
Integer32,
|
|
rlOspfSumLnkLength
|
|
Unsigned32,
|
|
rlOspfSumLnkMask
|
|
IpAddress,
|
|
rlOspfSumLnkMetric
|
|
Unsigned32
|
|
}
|
|
|
|
rlOspfSumLnkAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit identifier of the Area from which
|
|
the LSA was received."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rlOspfSumLnkEntry 1 }
|
|
|
|
rlOspfSumLnkLsid OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Link State ID is an LS Type Specific field
|
|
containing either a Router ID or an IP Address;
|
|
it identifies the piece of the routing domain
|
|
that is being described by the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.4 Link State ID"
|
|
::= { rlOspfSumLnkEntry 2 }
|
|
|
|
rlOspfSumLnkRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { rlOspfSumLnkEntry 3 }
|
|
|
|
rlOspfSumLnkSequence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number field is a signed 32-bit
|
|
integer. It is used to detect old and duplicate
|
|
link state advertisements. The space of sequence
|
|
numbers is linearly ordered. The larger the
|
|
sequence number the more recent the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.6 LS sequence number"
|
|
::= { rlOspfSumLnkEntry 4 }
|
|
|
|
|
|
rlOspfSumLnkAge OBJECT-TYPE
|
|
SYNTAX Integer32 -- Should be 0..MaxAge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the age of the link state
|
|
advertisement in seconds."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.1 LS age"
|
|
::= { rlOspfSumLnkEntry 5 }
|
|
|
|
rlOspfSumLnkChecksum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the checksum of the complete contents
|
|
of the advertisement, excepting the age field.
|
|
The age field is excepted so that an advertisement's
|
|
age can be incremented without updating the checksum.
|
|
The checksum used is the same that is used for ISO
|
|
connectionless datagrams; it is commonly referred
|
|
to as the Fletcher checksum."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.7 LS checksum"
|
|
::= { rlOspfSumLnkEntry 6 }
|
|
|
|
rlOspfSumLnkLength OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lenth in bytes of the LSA.
|
|
This includes the 20 byte LSA header."
|
|
::= { rlOspfSumLnkEntry 7 }
|
|
|
|
rlOspfSumLnkMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Value depends on the link's Type field."
|
|
::= { rlOspfSumLnkEntry 8 }
|
|
|
|
rlOspfSumLnkMetric OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The cost of using this router link."
|
|
::= { rlOspfSumLnkEntry 9 }
|
|
|
|
|
|
|
|
-- OSPF Summary LSA (Type 4)
|
|
|
|
rlOspfAsbLnkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfAsbLnkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Summary Link State Advertisement
|
|
for ASBR (Type 4)."
|
|
::= { rlOspf 7 }
|
|
|
|
|
|
rlOspfAsbLnkEntry OBJECT-TYPE
|
|
SYNTAX RlOspfAsbLnkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single entry from Summary LSA."
|
|
INDEX { rlOspfAsbLnkAreaId, rlOspfAsbLnkLsid,
|
|
rlOspfAsbLnkRouterId}
|
|
::= { rlOspfAsbLnkTable 1 }
|
|
|
|
RlOspfAsbLnkEntry ::=
|
|
SEQUENCE {
|
|
rlOspfAsbLnkAreaId
|
|
AreaID,
|
|
rlOspfAsbLnkLsid
|
|
IpAddress,
|
|
rlOspfAsbLnkRouterId
|
|
RouterID,
|
|
rlOspfAsbLnkSequence
|
|
Integer32,
|
|
rlOspfAsbLnkAge
|
|
Integer32,
|
|
rlOspfAsbLnkChecksum
|
|
Integer32,
|
|
rlOspfAsbLnkLength
|
|
Unsigned32,
|
|
rlOspfAsbLnkMetric
|
|
Unsigned32
|
|
}
|
|
|
|
rlOspfAsbLnkAreaId OBJECT-TYPE
|
|
SYNTAX AreaID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit identifier of the Area from which
|
|
the LSA was received."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.2 Area parameters"
|
|
::= { rlOspfAsbLnkEntry 1 }
|
|
|
|
rlOspfAsbLnkLsid OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Link State ID is an LS Type Specific field
|
|
containing either a Router ID or an IP Address;
|
|
it identifies the piece of the routing domain
|
|
that is being described by the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.4 Link State ID"
|
|
::= { rlOspfAsbLnkEntry 2 }
|
|
|
|
rlOspfAsbLnkRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { rlOspfAsbLnkEntry 3 }
|
|
|
|
rlOspfAsbLnkSequence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number field is a signed 32-bit
|
|
integer. It is used to detect old and duplicate
|
|
link state advertisements. The space of sequence
|
|
numbers is linearly ordered. The larger the
|
|
sequence number the more recent the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.6 LS sequence number"
|
|
::= { rlOspfAsbLnkEntry 4 }
|
|
|
|
|
|
rlOspfAsbLnkAge OBJECT-TYPE
|
|
SYNTAX Integer32 -- Should be 0..MaxAge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the age of the link state
|
|
advertisement in seconds."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.1 LS age"
|
|
::= { rlOspfAsbLnkEntry 5 }
|
|
|
|
rlOspfAsbLnkChecksum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the checksum of the complete contents
|
|
of the advertisement, excepting the age field.
|
|
The age field is excepted so that an advertisement's
|
|
age can be incremented without updating the checksum.
|
|
The checksum used is the same that is used for ISO
|
|
connectionless datagrams; it is commonly referred
|
|
to as the Fletcher checksum."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.7 LS checksum"
|
|
::= { rlOspfAsbLnkEntry 6 }
|
|
|
|
rlOspfAsbLnkLength OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lenth in bytes of the LSA.
|
|
This includes the 20 byte LSA header."
|
|
::= { rlOspfAsbLnkEntry 7 }
|
|
|
|
rlOspfAsbLnkMetric OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The cost of using this router link."
|
|
::= { rlOspfAsbLnkEntry 8 }
|
|
|
|
|
|
-- OSPF External LSA
|
|
|
|
rlOspfAseLnkTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlOspfAseLnkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"External Link State Advertisement."
|
|
::= { rlOspf 8 }
|
|
|
|
|
|
rlOspfAseLnkEntry OBJECT-TYPE
|
|
SYNTAX RlOspfAseLnkEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single entry from External LSA."
|
|
INDEX { rlOspfAseLnkLsid,
|
|
rlOspfAseLnkRouterId}
|
|
::= { rlOspfAseLnkTable 1 }
|
|
|
|
RlOspfAseLnkEntry ::=
|
|
SEQUENCE {
|
|
rlOspfAseLnkLsid
|
|
IpAddress,
|
|
rlOspfAseLnkRouterId
|
|
RouterID,
|
|
rlOspfAseLnkSequence
|
|
Integer32,
|
|
rlOspfAseLnkAge
|
|
Integer32,
|
|
rlOspfAseLnkChecksum
|
|
Integer32,
|
|
rlOspfAseLnkLength
|
|
Unsigned32,
|
|
rlOspfAseLnkMask
|
|
IpAddress,
|
|
rlOspfAseLnkFrwAddress
|
|
IpAddress,
|
|
rlOspfAseLnkBitE
|
|
INTEGER,
|
|
rlOspfAseLnkMetric
|
|
Unsigned32,
|
|
rlOspfAseLnkTag
|
|
Unsigned32
|
|
}
|
|
|
|
|
|
rlOspfAseLnkLsid OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Link State ID is an LS Type Specific field
|
|
containing either a Router ID or an IP Address;
|
|
it identifies the piece of the routing domain
|
|
that is being described by the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.4 Link State ID"
|
|
::= { rlOspfAseLnkEntry 1 }
|
|
|
|
rlOspfAseLnkRouterId OBJECT-TYPE
|
|
SYNTAX RouterID
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The 32 bit number that uniquely identifies the
|
|
originating router in the Autonomous System."
|
|
REFERENCE
|
|
"OSPF Version 2, Appendix C.1 Global parameters"
|
|
::= { rlOspfAseLnkEntry 2 }
|
|
|
|
rlOspfAseLnkSequence OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The sequence number field is a signed 32-bit
|
|
integer. It is used to detect old and duplicate
|
|
link state advertisements. The space of sequence
|
|
numbers is linearly ordered. The larger the
|
|
sequence number the more recent the advertisement."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.6 LS sequence number"
|
|
::= { rlOspfAseLnkEntry 3 }
|
|
|
|
rlOspfAseLnkAge OBJECT-TYPE
|
|
SYNTAX Integer32 -- Should be 0..MaxAge
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the age of the link state
|
|
advertisement in seconds."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.1 LS age"
|
|
::= { rlOspfAseLnkEntry 4 }
|
|
|
|
rlOspfAseLnkChecksum OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This field is the checksum of the complete contents
|
|
of the advertisement, excepting the age field.
|
|
The age field is excepted so that an advertisement's
|
|
age can be incremented without updating the checksum.
|
|
The checksum used is the same that is used for ISO
|
|
connectionless datagrams; it is commonly referred
|
|
to as the Fletcher checksum."
|
|
REFERENCE
|
|
"OSPF Version 2, Section 12.1.7 LS checksum"
|
|
::= { rlOspfAseLnkEntry 5 }
|
|
|
|
rlOspfAseLnkLength OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The lenth in bytes of the LSA.
|
|
This includes the 20 byte LSA header."
|
|
::= { rlOspfAseLnkEntry 6 }
|
|
|
|
rlOspfAseLnkMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Value depends on the link's Type field."
|
|
::= { rlOspfAseLnkEntry 7 }
|
|
|
|
rlOspfAseLnkFrwAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Data traffic for the advertised destination
|
|
will be forwarded to this address. If the
|
|
Forwarding address is set to 0.0.0.0, data
|
|
traffic will be forwarded instead to the LSA's
|
|
originator (i.e., the responsible AS boundary router)."
|
|
::= { rlOspfAseLnkEntry 8 }
|
|
|
|
rlOspfAseLnkBitE OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(1),
|
|
on(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of external metric. If bit E is set,
|
|
the metric specified is a Type 2 external metric."
|
|
::= { rlOspfAseLnkEntry 9 }
|
|
|
|
rlOspfAseLnkMetric OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The cost of this route."
|
|
::= { rlOspfAseLnkEntry 10 }
|
|
|
|
rlOspfAseLnkTag OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A 32-bit field attached to each external route."
|
|
::= { rlOspfAseLnkEntry 11 }
|
|
|
|
|
|
--Extention to ospfVirtIfTable
|
|
|
|
rlospfVirtIfExtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RlospfVirtIfExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Virtual Interface Table describes the virtual
|
|
links that the OSPF Process is configured to carry on."
|
|
::= { rlOspf 9 }
|
|
|
|
rlospfVirtIfExtEntry OBJECT-TYPE
|
|
SYNTAX RlospfVirtIfExtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The OSPF virtual interface table
|
|
extension for md5 authentication"
|
|
AUGMENTS { ospfVirtIfEntry }
|
|
::= { rlospfVirtIfExtTable 1 }
|
|
|
|
RlospfVirtIfExtEntry ::= SEQUENCE {
|
|
rlospfVirtifKeyChain DisplayString
|
|
}
|
|
|
|
rlospfVirtifKeyChain OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Name of the key-chain which ospf virtual
|
|
interface uses for md5 authentication"
|
|
::= { rlospfVirtIfExtEntry 1 }
|
|
|
|
END
|
|
|