mirror of
https://github.com/librenms/librenms.git
synced 2024-10-07 16:52:45 +00:00
a4ef7f5506
git-svn-id: http://www.observium.org/svn/observer/trunk@1577 61d68cd4-352d-0410-923a-c4978735b2b8
1510 lines
67 KiB
Plaintext
1510 lines
67 KiB
Plaintext
HP-ICF-8023-RPTR DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
Integer32, Counter32,
|
|
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
|
|
FROM SNMPv2-SMI
|
|
DisplayString, TruthValue
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
rptrPortAutoPartitionState
|
|
FROM SNMP-REPEATER-MIB -- 802.3 Repeater MIB
|
|
rpMauMediaAvailable, rpMauGroupIndex, rpMauPortIndex,
|
|
rpMauIndex
|
|
FROM MAU-MIB
|
|
hpicfObjectModules, hpicfRepeater, hpicf8023RptrTrapsPrefix
|
|
FROM HP-ICF-OID;
|
|
|
|
hpicf8023RptrMib MODULE-IDENTITY
|
|
LAST-UPDATED "200011032210Z" -- November 3, 2000
|
|
ORGANIZATION "Hewlett Packard Company,
|
|
Network Infrastructure Solutions"
|
|
CONTACT-INFO
|
|
"Hewlett Packard Company
|
|
8000 Foothills Blvd.
|
|
Roseville, CA 95747"
|
|
DESCRIPTION
|
|
"This MIB module contains objects that provide
|
|
HP-specific extensions to the 802.3 Repeater MIB."
|
|
|
|
REVISION "200011032210Z" -- November 3, 2000
|
|
DESCRIPTION "Updated division name."
|
|
|
|
REVISION "9807162027Z" -- July 16, 1998
|
|
DESCRIPTION
|
|
"Added repeater port auto-negotiation objects."
|
|
|
|
REVISION "9609100219Z" -- September 10, 1996
|
|
DESCRIPTION
|
|
"Split this MIB module from the former monolithic
|
|
hp-icf MIB. Added hpicf8023MultiRptr groups.
|
|
Deprecated objects that presumed a single repeater
|
|
segment."
|
|
REVISION "9402250000Z" -- February 25, 1994
|
|
DESCRIPTION
|
|
"Initial revision of this MIB module. Released
|
|
with the AdvanceStack 10BaseT hubs: HPJ2600A,
|
|
HPJ2601A and HPJ2602A and agent module HPJ2603A."
|
|
::= { hpicfObjectModules 9 }
|
|
|
|
|
|
hpRptrBasic OBJECT IDENTIFIER ::= { hpicfRepeater 1 }
|
|
hpRptrBasicGlobal OBJECT IDENTIFIER ::= { hpRptrBasic 1 }
|
|
|
|
|
|
hpRptrEntityName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..15))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
The local name of this repeater. This is the
|
|
same value as hpicfEntityName in the case where
|
|
there is Distributed Management Protocol to access
|
|
this device.
|
|
|
|
For SNMPv1, this name is appended to the agent
|
|
community name to obtain a community name to use
|
|
to specify that the agent should proxy to this
|
|
repeater. For example, if this agent has a
|
|
community with a community name of 'public', and
|
|
the value of this object is 'repeater1', the
|
|
community 'public/repeater1' will specify that the
|
|
agent should proxy to the public community of the
|
|
repeater1 box to obtain management information
|
|
about this repeater.
|
|
|
|
If an agent receives a management request where
|
|
the localEntity is not specified, it will default
|
|
to the local repeater on which this agent is
|
|
executing.
|
|
|
|
This object has been deprecated. Since it is a
|
|
scalar, it does not scale to systems containing
|
|
multiple repeater segments. In addition, it is only
|
|
considered useful in systems supporting the
|
|
Distributed Management Chain, which has also been
|
|
deprecated."
|
|
::= { hpRptrBasicGlobal 1 }
|
|
|
|
hpRptrThinlanFault OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
When set to 'true' this object causes the Fault
|
|
Led to blink if the ThinLan Port is segmented.
|
|
|
|
This object has been deprecated. It only makes
|
|
sense in systems that support a single BNC port."
|
|
::= { hpRptrBasicGlobal 2 }
|
|
|
|
hpRptrSqeEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
When 'true', this flag indicates that SQE has
|
|
been detected for the last ten agent transmits and
|
|
there is a high probability that the SQE switch on
|
|
the transceiver attached to the AUI port is set to
|
|
Enabled, when it should be Disabled.
|
|
|
|
This object has been deprecated, since it presumes
|
|
that the system will only have a single AUI port.
|
|
It has been replaced by the hpRptrPtSqeEnabled
|
|
object."
|
|
::= { hpRptrBasicGlobal 3 }
|
|
|
|
hpRptrRobustHealing OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
When this flag is set to 'true', it enables
|
|
robust port healing mode. The 802.3 specification
|
|
states that a segmented port is healed by
|
|
successfully transmitting or receiving a packet on
|
|
the port. This mode disables port healing on
|
|
successful packet reception and requires that a
|
|
packet be successfully transmitted on a port in
|
|
order for a segmented port to be healed."
|
|
::= { hpRptrBasicGlobal 4 }
|
|
|
|
hpRptrBasicGroup OBJECT IDENTIFIER ::= { hpRptrBasic 2 }
|
|
|
|
hpRptrBasicGroupTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpRptrBasicGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
HP specific extensions to the rptrGroupTable."
|
|
::= { hpRptrBasicGroup 1 }
|
|
|
|
hpRptrBasicGroupEntry OBJECT-TYPE
|
|
SYNTAX HpRptrBasicGroupEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
An entry in the table, containing HP extensions
|
|
for a specific group."
|
|
INDEX { hpRptrGrpGroupIndex }
|
|
::= { hpRptrBasicGroupTable 1 }
|
|
|
|
HpRptrBasicGroupEntry ::=
|
|
SEQUENCE {
|
|
hpRptrGrpGroupIndex Integer32,
|
|
hpRptrGrpPortsAdminStatus OCTET STRING,
|
|
hpRptrGrpPortsSegStatus OCTET STRING,
|
|
hpRptrGrpPortsMediaAvailable OCTET STRING,
|
|
hpRptrGrpPortsLinkbeatEnabled OCTET STRING,
|
|
hpRptrGrpPortsOperStatus OCTET STRING
|
|
}
|
|
|
|
hpRptrGrpGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
The group within the repeater for which this
|
|
entry contains information. This object has the
|
|
same value as the corresponding instance of
|
|
rptrGroupIndex."
|
|
::= { hpRptrBasicGroupEntry 1 }
|
|
|
|
hpRptrGrpPortsAdminStatus OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
The hpRptrGrpPortsAdminStatus is a bit map of the
|
|
state of the rptrPortAdminStatus object for all
|
|
of the ports in this group. The object has a one
|
|
bit for each port for which the value of
|
|
rptrPortAdminStatus is equal to 'enabled(1)' and
|
|
a zero bit for each port for which the value of
|
|
rptrPortAdminStatus is equal to 'disabled(2)'.
|
|
|
|
The bits are placed into the OCTET STRING in the
|
|
following order:
|
|
|
|
octet 0 octet 1 octet 2 ...
|
|
bits 7-0 bits 7-0 bits 7-0 ...
|
|
ports 1-8 ports 9-16 ports 17-24 ...
|
|
|
|
Values of unused bits in the last octet are
|
|
undefined."
|
|
::= { hpRptrBasicGroupEntry 2 }
|
|
|
|
hpRptrGrpPortsSegStatus OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
The hpRptrGrpPortsSegStatus is a bit map of the
|
|
state of the rptrPortAutoPartitionState of all of
|
|
the ports in this group. The object has a one
|
|
bit for each port for which the value of
|
|
rptrPortAutoPartitionState is equal to
|
|
'notAutoPartitioned(1)' and a zero bit for each
|
|
port for which the value of
|
|
rptrPortAutoPartitionState is equal to
|
|
'autoPartitioned(2)'.
|
|
|
|
The bits are placed into the OCTET STRING in the
|
|
following order:
|
|
|
|
octet 0 octet 1 octet 2 ...
|
|
bits 7-0 bits 7-0 bits 7-0 ...
|
|
ports 1-8 ports 9-16 ports 17-24 ...
|
|
|
|
Values of unused bits in the last octet are
|
|
undefined."
|
|
::= { hpRptrBasicGroupEntry 3 }
|
|
|
|
hpRptrGrpPortsMediaAvailable OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
The hpRptrGrpPortsMediaAvailable is a bit map of
|
|
the state of the rpMauMediaAvailable object for
|
|
all of the ports in this group. The object has a
|
|
one bit for each port for which the value of
|
|
rpMauMediaAvailable is equal to 'available(3)'
|
|
and a zero bit for each port for which the value
|
|
of rpMauMediaAvailable is not equal to
|
|
'available(3)'.
|
|
|
|
The bits are placed into the OCTET STRING in the
|
|
following order:
|
|
|
|
octet 0 octet 1 octet 2 ...
|
|
bits 7-0 bits 7-0 bits 7-0 ...
|
|
ports 1-8 ports 9-16 ports 17-24 ...
|
|
|
|
Values of unused bits in the last octet are
|
|
undefined."
|
|
::= { hpRptrBasicGroupEntry 4 }
|
|
|
|
hpRptrGrpPortsLinkbeatEnabled OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
The hpRptrGrpPortsLinkbeatEnabled is a bit map of
|
|
the state of the hpRptrPtLinkbeatEnable object for
|
|
all of the ports in this group. The object has a
|
|
one bit for each port for which the value of
|
|
hpRptrPtLinkbeatEnable is equal to 'true(1)' and
|
|
a zero bit for each port for which the value of
|
|
hpRptrPtLinkbeatEnable is equal to 'false(2)'.
|
|
|
|
The bits are placed into the OCTET STRING in the
|
|
following order:
|
|
|
|
octet 0 octet 1 octet 2 ...
|
|
bits 7-0 bits 7-0 bits 7-0 ...
|
|
ports 1-8 ports 9-16 ports 17-24 ...
|
|
|
|
Values of unused bits in the last octet are
|
|
undefined."
|
|
::= { hpRptrBasicGroupEntry 5 }
|
|
|
|
hpRptrGrpPortsOperStatus OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..128))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
The hpRptrGrpPortsOperStatus is a bit map of the
|
|
state of all hub ports in the group. The object
|
|
has a 1 bit for each port that is enabled, not
|
|
segmented, and the media is available. Ports on
|
|
which these conditions are not true have a 0 bit.
|
|
The bits are placed into the OCTET STRING in the
|
|
following order:
|
|
|
|
octet 0 octet 1 octet 2 ...
|
|
bits 7-0 bits 7-0 bits 7-0 ...
|
|
ports 1-8 ports 9-16 ports 17-24 ...
|
|
|
|
Values of unused bits in the last octet are
|
|
undefined."
|
|
::= { hpRptrBasicGroupEntry 6 }
|
|
|
|
|
|
hpRptrBasicPort OBJECT IDENTIFIER ::= { hpRptrBasic 3 }
|
|
|
|
hpRptrBasicPtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpRptrBasicPtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"HP specific extensions to the rptrPortTable."
|
|
::= { hpRptrBasicPort 1 }
|
|
|
|
hpRptrBasicPtEntry OBJECT-TYPE
|
|
SYNTAX HpRptrBasicPtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the table, containing HP extensions
|
|
for a specific port."
|
|
INDEX { hpRptrPtGroupIndex, hpRptrPtPortIndex }
|
|
::= { hpRptrBasicPtTable 1 }
|
|
|
|
HpRptrBasicPtEntry ::=
|
|
SEQUENCE {
|
|
hpRptrPtGroupIndex Integer32,
|
|
hpRptrPtPortIndex Integer32,
|
|
hpRptrPtLinkbeatEnable TruthValue,
|
|
hpRptrPtPolarityReversed TruthValue,
|
|
hpRptrPtSqeEnabled TruthValue,
|
|
hpRptrPtMediaAvailTrapEnable TruthValue,
|
|
hpRptrPtLongCableEnable TruthValue
|
|
}
|
|
|
|
hpRptrPtGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group containing the port for which this
|
|
entry contains information. This object has the
|
|
same value as the corresponding instance of
|
|
rptrPortGroupIndex."
|
|
::= { hpRptrBasicPtEntry 1 }
|
|
|
|
hpRptrPtPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port within the group for which this entry
|
|
contains information. This object has the same
|
|
value as the corresponding instance of
|
|
rptrPortIndex."
|
|
::= { hpRptrBasicPtEntry 2 }
|
|
|
|
hpRptrPtLinkbeatEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this flag is set to 'true' the port's link
|
|
beat is enabled and when set to 'false' it is
|
|
disabled."
|
|
::= { hpRptrBasicPtEntry 3 }
|
|
|
|
hpRptrPtPolarityReversed OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to indicate that the hub port
|
|
was wired with the positive/negative polarity of
|
|
its transmit and receive pairs reversed. Note
|
|
that the port will continue to operate in this
|
|
state, with the hub inverting the polarity
|
|
internally."
|
|
::= { hpRptrBasicPtEntry 4 }
|
|
|
|
hpRptrPtSqeEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When 'true', this flag indicates that SQE has
|
|
been detected for the last ten agent transmits and
|
|
there is a high probability that the SQE switch on
|
|
the transceiver attached to this port is set to
|
|
Enabled, when it should be Disabled. This value
|
|
can only be 'true' on AUI ports."
|
|
::= { hpRptrBasicPtEntry 5 }
|
|
|
|
hpRptrPtMediaAvailTrapEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether hpicfMediaAvailDetectTrap and
|
|
hpicfMediaAvailLostTrap events should be generated
|
|
for MAUs attached to this port. This object has the
|
|
value of 'false' by default. Setting the value of
|
|
this object to 'true' will cause a
|
|
hpicfMediaAvailDetectTrap event to be generated
|
|
whenever an instance of rpMauMediaAvailable object
|
|
associated with a MAU attached to this port enters
|
|
the 'available' state, and a hpicfMediaAvailLostTrap
|
|
to be generated whenever an instance of the
|
|
rpMauMediaAvailable object associated with a MAU
|
|
attached to this port exits the 'available' state.
|
|
Note that the disposition of these events is
|
|
controlled by the RMON eventTable.
|
|
|
|
We recommend that this object is only be set to
|
|
'true' on important ports, such as cascade ports and
|
|
ports attached to routers bridges, switches, or
|
|
servers. Setting this object to 'true' on other
|
|
ports may cause irrelevant traps. For example, it
|
|
is unlikely that an administrator would want to
|
|
receive a trap every time a user turns their PC off."
|
|
::= { hpRptrBasicPtEntry 6 }
|
|
|
|
hpRptrPtLongCableEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When this flag is set to 'true' the port's squelch
|
|
level will be reduced to account for extended
|
|
distance connections. When set to 'false', this
|
|
port's squelch level will be normal. We recommend
|
|
that this object only be set to 'true' for ports
|
|
that are actually connected to long cables."
|
|
::= { hpRptrBasicPtEntry 7 }
|
|
|
|
hpRptrMonitor OBJECT IDENTIFIER ::= { hpicfRepeater 2 }
|
|
|
|
hpRptrMonitorGlobal OBJECT IDENTIFIER ::= { hpRptrMonitor 1 }
|
|
|
|
-- Note: The hpRptrMonitorGlobal counters that are composed of
|
|
-- other objects are provided to allow for event testing on
|
|
-- global error conditions.
|
|
--
|
|
-- Note: the hpRptrMonitorGlobal counters have been deprecated.
|
|
-- Since they are scalars, they do not scale to systems
|
|
-- containing multiple repeater segments. The standard repeater
|
|
-- MIB is adding per-repeater counters for collisions, total
|
|
-- frames, total octets and total errors. Keeping per-repeater
|
|
-- totals of the other counters included here was felt to be
|
|
-- overkill. Another factor is that it is quite expensive to
|
|
-- maintain global counters in the presence of port mobility, so
|
|
-- it made sense to limit the number of total counters to those
|
|
-- that would be the most useful for network management. Note
|
|
-- that most of the information in these counters is available
|
|
-- through other MIBs, such as the RMON etherStats group.
|
|
|
|
hpRptrMonCounters
|
|
OBJECT IDENTIFIER ::= { hpRptrMonitorGlobal 1 }
|
|
|
|
hpRptrMonGlobalFrames OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
The total number of frames of valid frame length
|
|
that have been received on all ports in this
|
|
repeater. This counter is the summation of the
|
|
values of the rptrMonitorPortReadableFrames
|
|
counter for all of the ports in this repeater.
|
|
Equivalently, this counter is the summation of the
|
|
values of the rptrMonitorGroupTotalFrames counter
|
|
for all of the port groups in this repeater."
|
|
REFERENCE
|
|
"RFC 1516 rptrMonitorPortReadableFrames and
|
|
rptrMonitorGroupTotalFrames, and IEEE 802.3 Rptr Mgt,
|
|
19.2.6.2, aReadableFrames."
|
|
::= { hpRptrMonCounters 1 }
|
|
|
|
hpRptrMonGlobalOctets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
The total number of octets contained in the valid
|
|
frames that have been received on the ports in
|
|
this repeater. This counter is the summation of
|
|
the values of the rptrMonitorPortReadableOctets
|
|
counter for all of the ports in this repeater.
|
|
Equivalently, this counter is the summation of the
|
|
values of the rptrMonitorGroupTotalOctets counter
|
|
for all of the port groups in this repeater."
|
|
REFERENCE
|
|
"RFC 1516 rptrMonitorPortReadableOctets and
|
|
rptrMonitorGroupTotalOctets, and IEEE 802.3 Rptr Mgt,
|
|
19.2.6.2, aReadableOctets."
|
|
::= { hpRptrMonCounters 2 }
|
|
|
|
hpRptrMonGlobalFCSErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
This counter is incremented by one for each frame
|
|
received on any port with the FCSError signal
|
|
asserted and the FramingError and CollisionEvent
|
|
signals deasserted and whose OctetCount is greater
|
|
than or equal to minFrameSize and less than or
|
|
equal to maxFrameSize (Ref: 4.4.2.1, IEEE 802.3
|
|
Std). This counter is the summation of the values
|
|
of the rptrMonitorPortFCSErrors counter for all of
|
|
the ports in this repeater."
|
|
REFERENCE
|
|
"RFC 1516 rptrMonitorPortFCSErrors and IEEE 802.3
|
|
Rptr Mgt, 19.2.6.2, aFrameCheckSequenceErrors."
|
|
::= { hpRptrMonCounters 3 }
|
|
|
|
hpRptrMonGlobalAlignmentErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
This counter is incremented by one for each frame
|
|
received on any port with the FCSError and
|
|
FramingError signals asserted and CollisonEvent
|
|
signal deasserted and whose OctetCount is greater
|
|
than or equal to minFrameSize and less than or
|
|
equal to maxFrameSize (Ref: 4.4.2.1, IEEE 802.3
|
|
Std). If hpRptrMonGlobalAlignmentErrors is
|
|
incremented, then the hpRptrMonGlobalFCSErorrs
|
|
counter shall not be incremented for the same
|
|
frame. This counter is the summation of the
|
|
values of the rptrMonitorPortAlignmentErrors
|
|
counter for all of the ports in this repeater."
|
|
REFERENCE
|
|
"RFC 1516 rptrMonitorPortAlignmentErrors and IEEE
|
|
802.3 Rptr Mgt, 19.2.6.2, aAlignmentErrors."
|
|
::= { hpRptrMonCounters 4 }
|
|
|
|
hpRptrMonGlobalFrameTooLongs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
This counter is incremented by one for each frame
|
|
received on any port whose OctetCount is greater
|
|
than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std).
|
|
If hpRptrMonGlobalFrameTooLongs is incremented,
|
|
then neither the hpRptrMonGlobalAlignmentErorrs
|
|
nor the hpRptrMonGlobalFCSErrors counter shall be
|
|
incremented for the frame. This counter is the
|
|
summation of the values of the
|
|
rptrMonitorPortFrameTooLongs counter for all of
|
|
the ports in this repeater."
|
|
REFERENCE
|
|
"RFC 1516 rptrMonitorPortFrameTooLongs and IEEE 802.3
|
|
Rptr Mgt, 19.2.6.2, aFramesTooLong"
|
|
::= { hpRptrMonCounters 5 }
|
|
|
|
hpRptrMonGlobalShortEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
This counter is incremented by one for each
|
|
CarrierEvent on any port with ActivityDuration
|
|
less than ShortEventMaxTime. ShortEventMaxTime is
|
|
greater than 74 bit times and less than 82 bit
|
|
times. ShortEventMaxTime has tolerances included
|
|
to provide for circuit losses between a
|
|
conformance test point at the AUI and the
|
|
measurement point within the state machine. This
|
|
counter is the summation of the values of the
|
|
rptrMonitorPortShortEvents counter for all of the
|
|
ports in this repeater."
|
|
REFERENCE
|
|
"RFC 1516 rptrMonitorPortShortEvents and IEEE 802.3
|
|
Rptr Mgt, 19.2.6.2, aShortEvents."
|
|
::= { hpRptrMonCounters 6 }
|
|
|
|
hpRptrMonGlobalRunts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
This counter is incremented by one for each
|
|
CarrierEvent on any port that meets one of the
|
|
following two conditions. Only one test need be
|
|
made. a) The ActivityDuration is greater than
|
|
ShortEventMaxTime and less than ValidPacketMinTime
|
|
and the CollisionEvent signal is deasserted. b)
|
|
The OctetCount is less than 64, the
|
|
ActivityDuration is greater than ShortEventMaxTime
|
|
and the CollisionEvent signal is deasserted.
|
|
ValidPacketMinTime is greater than or equal to 552
|
|
bit times but less than 565 bit times.
|
|
|
|
An event whose length is greater than 74 bit times
|
|
but less than 82 bit times shall increment either
|
|
the hpRptrMonGlobalShortEvents counter or the
|
|
hpRptrMonGlobalRunts counter but not both. A
|
|
CarrierEvent greater than or equal to 552 bit
|
|
times but less than 565 bit times may or may not
|
|
increment the hpRptrMonGlobalRunts counter.
|
|
ValidPacketMinTime has tolerances included to
|
|
provide for circuit losses between a conformance
|
|
test point at the AUI and the measurement point
|
|
within the state machine.
|
|
|
|
Runts usually indicate collision fragments, a
|
|
normal network event. This counter is the
|
|
summation of the values of the
|
|
rptrMonitorPortRunts counter for all of the ports
|
|
in this repeater."
|
|
REFERENCE
|
|
"RFC 1516 rptrMonitorPortRunts and IEEE 802.3 Rptr
|
|
Mgt, 19.2.6.2, aRunts."
|
|
::= { hpRptrMonCounters 7 }
|
|
|
|
hpRptrMonGlobalCollisions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
This counter is incremented by one for any
|
|
CarrierEvent signal on any port for which the
|
|
CollisionEvent signal on any port is asserted.
|
|
|
|
This counter differs from
|
|
rptrMonitorTransmitCollisions in that it counts
|
|
all collisions seen by this repeater, even those
|
|
involving only a single port on this repeater,
|
|
whereas rptrMonitorTransmitCollisions counts only
|
|
collisions involving multiple ports on this
|
|
repeater."
|
|
REFERENCE
|
|
"RFC 1516 rptrMonitorPortCollisions and IEEE 802.3
|
|
Rptr Mgt, 19.2.6.2, aCollisions."
|
|
::= { hpRptrMonCounters 8 }
|
|
|
|
hpRptrMonGlobalLateEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
This counter is incremented by one for each
|
|
CarrierEvent on any port in which the CollIn(X)
|
|
variable transitions to the value SQE (Ref:
|
|
9.6.6.2, IEEE 802.3 Std) while the
|
|
ActivityDuration is greater than the
|
|
LateEventThreshold. Such a CarrierEvent is
|
|
counted twice, as both hpRptrMonGlobalCollisions
|
|
and hpRptrMonGlobalLateEvents. The
|
|
LateEventThreshold is greater than 480 bit times
|
|
and less than 565 bit times. LateEventThreshold
|
|
has tolerances included to permit an
|
|
implementation to build a single threshold to
|
|
serve as both the LateEventThreshold and
|
|
ValidPacketMinTime threshold. This counter is the
|
|
summation of the values of the
|
|
rptrMonitorPortLateEvents counter for all of the
|
|
ports in this repeater."
|
|
REFERENCE
|
|
"RFC 1516 rptrMonitorPortLateEvents and IEEE 802.3
|
|
Rptr Mgt, 19.2.6.2, aLateEvents."
|
|
::= { hpRptrMonCounters 9 }
|
|
|
|
hpRptrMonGlobalVeryLongEvents OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
This counter is incremented by one for each
|
|
CarrierEvent on any port whose ActivityDuration is
|
|
greater than the MAU Jabber Lockup Protection
|
|
timer TW3 (Ref: 9.6.1 & 9.6.5, IEEE 802.3 Std).
|
|
Other counters may be incremented as appropriate.
|
|
This counter is the summation of the values of the
|
|
rptrMonitorPortVeryLongEvents counter for all of
|
|
the ports in this repeater."
|
|
REFERENCE
|
|
"RFC 1516 rptrMonitorPortVeryLongEvents and IEEE
|
|
802.3 Rptr Mgt, 19.2.6.2, aVeryLongEvents."
|
|
::= { hpRptrMonCounters 10 }
|
|
|
|
hpRptrMonGlobalDataRateMismatches OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
This counter is incremented by one for each frame
|
|
received on any port that meets all of the
|
|
following conditions: a) The CollisionEvent
|
|
signal is not asserted. b) The ActivityDuration
|
|
is greater than ValidPacketMinTime. c) The
|
|
frequency (data rate) is detectably mismatched
|
|
from the local transmit frequency. The exact
|
|
degree of mismatch is vendor specific and is to be
|
|
defined by the vendor for conformance testing.
|
|
When this event occurs, other counters whose
|
|
increment conditions were satisfied may or may not
|
|
also be incremented. This counter is the
|
|
summation of the values of the
|
|
rptrMonitorPortDatRateMismatches counter for all
|
|
of the ports in this repeater."
|
|
REFERENCE
|
|
"RFC 1516 rptrMonitorPortDataRateMismatches and IEEE
|
|
802.3 Rptr Mgt, 19.2.6.2, aDataRateMismatches."
|
|
::= { hpRptrMonCounters 11 }
|
|
|
|
hpRptrMonGlobalAutoPartitions OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
This counter is incremented by one for each time
|
|
the repeater has automatically partitioned any
|
|
port. The conditions that cause port partitioning
|
|
are specified in the partition state machine in
|
|
Section 9 of the IEEE 802.3 Std. This counter is
|
|
the summation of the values of the
|
|
rptrMonitorPortAutoPartitions for all of the ports
|
|
in this repeater."
|
|
REFERENCE
|
|
"RFC 1516 rptrMonitorPortAutoPartitions and IEEE
|
|
802.3 Rptr Mgt, 19.2.6.2, aAutoPartitions."
|
|
::= { hpRptrMonCounters 12 }
|
|
|
|
hpRptrMonGlobalErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
The total number of errors which have occured
|
|
on any port in this repeater. This counter is
|
|
the summation of the values of other error
|
|
counters, namely:
|
|
|
|
hpRptrMonGlobalFCSErrors,
|
|
hpRptrMonGlobalAlignmentErrors,
|
|
hpRptrMonGlobalFrameTooLongs,
|
|
hpRptrMonGlobalShortEvents,
|
|
hpRptrMonGlobalLateEvents,
|
|
hpRptrMonGlobalVeryLongEvents, and
|
|
hpRptrMonGlobalDataRateMismatches.
|
|
|
|
Equivalently, this counter is the summation of
|
|
the values of the rptrMonitorPortTotalErrors
|
|
counter for all of the ports in this repeater, or
|
|
it is the summation of the values of
|
|
rptrMonitorGroupTotalErrors for all of the port
|
|
groups in this repeater."
|
|
REFERENCE
|
|
"RFC 1516, rptrMonitorGroupTotalErrors and
|
|
hpRptrMonitorPortTotalErrors."
|
|
::= { hpRptrMonCounters 13 }
|
|
|
|
hpRptrMonGlobalUcastPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
This counter is incremented by one for each
|
|
unicast packet of valid frame length received on
|
|
any port. This counter is the summation of
|
|
hpRptrMonPortUcastPackets for all of the ports
|
|
in this repeater. This counter may not be
|
|
implemented for repeaters which do not have a
|
|
local network management agent."
|
|
::= { hpRptrMonCounters 14 }
|
|
|
|
hpRptrMonGlobalBcastPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
This counter is incremented by one for each
|
|
broadcast packet of valid frame length received on
|
|
any port. This counter is the summation of
|
|
hpRptrMonPortBcastPackets for all of the ports
|
|
in this repeater. This counter may not be
|
|
implemented for repeaters which do not have a
|
|
local network management agent."
|
|
::= { hpRptrMonCounters 15 }
|
|
|
|
hpRptrMonGlobalMcastPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS OBJECT IS DEPRECATED *********
|
|
|
|
This counter is incremented by one for each
|
|
multicast packet of valid frame length received on
|
|
any port. This counter is the summation of
|
|
hpRptrMonPortMcastPackets for all of the ports in
|
|
this repeater. This counter may not be
|
|
implemented for repeaters which do not have a
|
|
local network management agent."
|
|
::= { hpRptrMonCounters 16 }
|
|
|
|
hpRptrMonitorGroup
|
|
OBJECT IDENTIFIER ::= { hpRptrMonitor 2 } -- unused
|
|
|
|
hpRptrMonitorPort
|
|
OBJECT IDENTIFIER ::= { hpRptrMonitor 3 }
|
|
|
|
hpRptrMonPtTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpRptrMonPtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of HP specific per port monitor objects."
|
|
::= { hpRptrMonitorPort 1 }
|
|
|
|
hpRptrMonPtEntry OBJECT-TYPE
|
|
SYNTAX HpRptrMonPtEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the table, containing per port
|
|
objects for a single port."
|
|
INDEX { hpRptrMonPtGroupIndex, hpRptrMonPtPortIndex }
|
|
::= { hpRptrMonPtTable 1 }
|
|
|
|
HpRptrMonPtEntry ::=
|
|
SEQUENCE {
|
|
hpRptrMonPtGroupIndex Integer32,
|
|
hpRptrMonPtPortIndex Integer32,
|
|
hpRptrMonPtUcastPackets Counter32,
|
|
hpRptrMonPtBcastPackets Counter32,
|
|
hpRptrMonPtMcastPackets Counter32
|
|
}
|
|
|
|
hpRptrMonPtGroupIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The group containing the port for which this
|
|
entry contains information. This object has the
|
|
same value as the corresponding instance of
|
|
rptrMonitorPortGroupIndex."
|
|
::= { hpRptrMonPtEntry 1 }
|
|
|
|
hpRptrMonPtPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (1..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The port within the group for which this entry
|
|
contains information. This object has the same
|
|
value as the corresponding instance of
|
|
rptrMonitorPortIndex."
|
|
::= { hpRptrMonPtEntry 2 }
|
|
|
|
hpRptrMonPtUcastPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter is incremented by one for each
|
|
unicast packet of valid frame length received on
|
|
this port. This object may not be implemented for
|
|
repeaters which do not have a local network
|
|
management agent."
|
|
::= { hpRptrMonPtEntry 3 }
|
|
|
|
hpRptrMonPtBcastPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter is incremented by one for each
|
|
broadcast packet of valid frame length received on
|
|
this port. This object may not be implemented for
|
|
repeaters which do not have a local network
|
|
management agent."
|
|
::= { hpRptrMonPtEntry 4 }
|
|
|
|
hpRptrMonPtMcastPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This counter is incremented by one for each
|
|
multicast packet of valid frame length received on
|
|
this port. This object may not be implemented for
|
|
repeaters which do not have a local network
|
|
management agent."
|
|
::= { hpRptrMonPtEntry 5 }
|
|
|
|
|
|
hpRpMauGroup OBJECT IDENTIFIER ::= { hpicfRepeater 4 }
|
|
|
|
hpRpMauTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HpRpMauEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"HP extensions to the rpMauTable."
|
|
::= { hpRpMauGroup 1 }
|
|
|
|
hpRpMauEntry OBJECT-TYPE
|
|
SYNTAX HpRpMauEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the table, containing HP extensions
|
|
for a single MAU."
|
|
INDEX { rpMauGroupIndex, rpMauPortIndex, rpMauIndex }
|
|
::= { hpRpMauTable 1 }
|
|
|
|
HpRpMauEntry ::=
|
|
SEQUENCE {
|
|
hpRpMauTypeList BITS,
|
|
hpRpMauAutoNegSupported TruthValue,
|
|
hpRpMauAutoNegAdminStatus INTEGER,
|
|
hpRpMauAutoNegRemoteSignaling INTEGER,
|
|
hpRpMauAutoNegConfig INTEGER,
|
|
hpRpMauAutoNegCapReceived BITS,
|
|
hpRpMauAutoNegRestart INTEGER
|
|
}
|
|
|
|
hpRpMauTypeList OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
bOther(0), -- other or unknown
|
|
bAUI(1), -- AUI
|
|
b10base5(2), -- 10BASE-5
|
|
bFoirl(3), -- FOIRL
|
|
|
|
b10base2(4), -- 10BASE-2
|
|
b10baseT(5), -- 10BASE-T duplex mode unknown
|
|
b10baseFP(6), -- 10BASE-FP
|
|
b10baseFB(7), -- 10BASE-FB
|
|
b10baseFL(8), -- 10BASE-FL duplex mode unknown
|
|
b10broad36(9), -- 10BROAD36
|
|
b10baseTHD(10), -- 10BASE-T half duplex mode
|
|
b10baseTFD(11), -- 10BASE-T full duplex mode
|
|
b10baseFLHD(12), -- 10BASE-FL half duplex mode
|
|
b10baseFLFD(13), -- 10BASE-FL full duplex mode
|
|
|
|
b100baseT4(14), -- 100BASE-T4
|
|
b100baseTXHD(15), -- 100BASE-TX half duplex mode
|
|
b100baseTXFD(16), -- 100BASE-TX full duplex mode
|
|
b100baseFXHD(17), -- 100BASE-FX half duplex mode
|
|
b100baseFXFD(18), -- 100BASE-FX full duplex mode
|
|
b100baseT2HD(19), -- 100BASE-T2 half duplex mode
|
|
b100baseT2FD(20) -- 100BASE-T2 full duplex mode
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that uniquely identifies the set of
|
|
possible IEEE 802.3 types that the MAU could be. If
|
|
auto-negotiation is present on this MAU, this object
|
|
will map to hpRpMauAutoNegCapability.
|
|
|
|
Note that a repeater can never actually support the
|
|
full-duplex MAU types. The bits for them are
|
|
retained to keep the bit values consistent with
|
|
ifMauTypeListBits."
|
|
::= { hpRpMauEntry 1 }
|
|
|
|
hpRpMauAutoNegSupported OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates whether or not
|
|
auto-negotiation is supported on this MAU."
|
|
::= { hpRpMauEntry 2 }
|
|
|
|
hpRpMauAutoNegAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
autoNegotiate(1),
|
|
forceTo100TXHD(2),
|
|
forceTo10THD(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to autoNegotiate(1) will cause
|
|
auto-negotiation to be enabled on this port.
|
|
|
|
Setting this object to forceTo100TXHD will cause
|
|
auto-negotiation to be disabled on this port, and
|
|
cause the operational type of the MAU on this port
|
|
(as reported by rpMauType) to transition to
|
|
dot3MauType100BaseTXHD.
|
|
|
|
Setting this object to forceTo10THD will cause
|
|
auto-negotiation to be disabled on this port, and
|
|
cause the operational type of the MAU on this port
|
|
(as reported by rpMauType) to transition to
|
|
dot3MauType10BaseTHD."
|
|
::= { hpRpMauEntry 3 }
|
|
|
|
hpRpMauAutoNegRemoteSignaling OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
detected(1),
|
|
notdetected(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value indicating whether the remote end of the
|
|
link is using auto-negotiation signaling. It takes
|
|
the value detected(1) if and only if, during the
|
|
previous link negotiation, FLP Bursts were received."
|
|
REFERENCE "[IEEE 802.3 Mgt], 30.6.1.1.3,
|
|
aAutoNegRemoteSignaling."
|
|
::= { hpRpMauEntry 4 }
|
|
|
|
hpRpMauAutoNegConfig OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
configuring(2),
|
|
complete(3),
|
|
disabled(4),
|
|
parallelDetectFail(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value indicating the current status of the
|
|
auto-negotiation process. The enumeration
|
|
parallelDetectFail(5) maps to a failure in parallel
|
|
detection as defined in 28.2.3.1 of
|
|
[IEEE 802.3 Std]."
|
|
REFERENCE "[IEEE 802.3 Mgt], 30.6.1.1.4,
|
|
aAutoNegAutoConfig."
|
|
::= { hpRpMauEntry 5 }
|
|
|
|
hpRpMauAutoNegCapReceived OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
bOther(0), -- other or unknown
|
|
b10baseT(1), -- 10BASE-T half duplex mode
|
|
b10baseTFD(2), -- 10BASE-T full duplex mode
|
|
b100baseT4(3), -- 100BASE-T4
|
|
b100baseTX(4), -- 100BASE-TX half duplex mode
|
|
b100baseTXFD(5), -- 100BASE-TX full duplex mode
|
|
b100baseT2(6), -- 100BASE-T2 half duplex mode
|
|
b100baseT2FD(7) -- 100BASE-T2 full duplex mode
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that uniquely identifies the set of
|
|
capabilities received from the remote
|
|
auto-negotiation entity.
|
|
|
|
Note that ports that support this MIB may be
|
|
attached to remote auto-negotiation entities which
|
|
have capabilities beyond the scope of this MIB."
|
|
REFERENCE "[IEEE 802.3 Mgt], 30.6.1.1.7,
|
|
aAutoNegReceivedTechnologyAbility."
|
|
::= { hpRpMauEntry 6 }
|
|
|
|
hpRpMauAutoNegRestart OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
restart(1),
|
|
norestart(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the value of this object is set to restart(1)
|
|
then this will force auto-negotiation to begin link
|
|
renegotiation. If auto-negotiation signaling is
|
|
disabled, a write to this object has no effect.
|
|
|
|
Setting the value of this object to norestart(2) has
|
|
no effect."
|
|
REFERENCE "[IEEE 802.3 Mgt], 30.6.1.2.1,
|
|
acAutoNegRestartAutoConfig."
|
|
::= { hpRpMauEntry 7 }
|
|
|
|
|
|
|
|
-- 802.3 Repeater Specific Traps
|
|
|
|
|
|
hpicfLinkBeatTrap NOTIFICATION-TYPE
|
|
OBJECTS { rpMauMediaAvailable }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS NOTIFICATION IS DEPRECATED *********
|
|
|
|
A hpicfLinkBeatTrap is device type specific to ICF
|
|
hubs. It signifies that the hub hardware has
|
|
detected a change of state in a port's link beat
|
|
status. The current value of the port's link beat
|
|
status is returned in the PDU.
|
|
|
|
This trap has been deprecated. It is replaced by the
|
|
hpicfMediaAvailDetectTrap and the
|
|
hpicfMediaAvailLostTrap."
|
|
::= { hpicf8023RptrTrapsPrefix 1 }
|
|
|
|
hpicfPartitionTrap NOTIFICATION-TYPE
|
|
OBJECTS { rptrPortAutoPartitionState }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS NOTIFICATION IS DEPRECATED *********
|
|
|
|
A hpicfPartitionTrap is device type specific to ICF
|
|
hubs. It signifies that the hub hardware has
|
|
detected a change of state in a port's partition
|
|
status. The current value of the port's partition
|
|
status is returned in the PDU.
|
|
|
|
This trap has been deprecated. It is replaced by the
|
|
hpicfPortPartitionTrap and the hpicfPortHealTrap."
|
|
::= { hpicf8023RptrTrapsPrefix 2 }
|
|
|
|
hpicfMediaAvailDetectTrap NOTIFICATION-TYPE
|
|
OBJECTS { rpMauMediaAvailable }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A hpicfMediaAvailDetectTraps is device type specific
|
|
to ICF hubs. It signifies that the hub hardware has
|
|
detected an instance of rpMauMediaAvailable for one
|
|
of the repeater's ports has entered the 'available'
|
|
state from some other state. Note that this trap is
|
|
only generated for instances of rpMauMediaAvailable
|
|
associated with MAUs attached to repeater ports for
|
|
which the corresponding instance of the
|
|
hpRptrPtMediaAvailTrapEnable object is equal to
|
|
'true'.
|
|
|
|
The previous value of the instance of the
|
|
rpMauMediaAvailable object that entered the 'active'
|
|
state is returned in the PDU."
|
|
::= { hpicf8023RptrTrapsPrefix 3 }
|
|
|
|
hpicfMediaAvailLostTrap NOTIFICATION-TYPE
|
|
OBJECTS { rpMauMediaAvailable }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A hpicfMediaAvailLostTraps is device type specific
|
|
to ICF hubs. It signifies that the hub hardware has
|
|
detected an instance of rpMauMediaAvailable for one
|
|
of the repeater's ports that had been in the
|
|
'available' state has exited that state. Note that
|
|
this trap is only generated for instances of
|
|
rpMauMediaAvailable associated with MAUs attached to
|
|
repeater ports for which the corresponding instance
|
|
of the hpRptrPtMediaAvailTrapEnable object is equal
|
|
to 'true'.
|
|
|
|
The new value of the instance of the
|
|
rpMauMediaAvailable object that exited the 'active'
|
|
state is returned in the PDU."
|
|
::= { hpicf8023RptrTrapsPrefix 4 }
|
|
|
|
hpicfPortPartitionTrap NOTIFICATION-TYPE
|
|
OBJECTS { rptrPortAutoPartitionState }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A hpicfPortPartitionTrap is device type specific
|
|
to ICF hubs. It signifies that the hub hardware has
|
|
detected that an instance of
|
|
rptrPortAutoPartitionState for one of the repeater's
|
|
ports has changed from the 'notAutoPartitioned' state
|
|
to the 'autoPartitioned' state. The current value of
|
|
the instance of the rptrPortAutoPartitionState for
|
|
the port that auto-partitioned is returned in the
|
|
PDU."
|
|
::= { hpicf8023RptrTrapsPrefix 5 }
|
|
|
|
hpicfPortHealTrap NOTIFICATION-TYPE
|
|
OBJECTS { rptrPortAutoPartitionState }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A hpicfPortHealTrap is device type specific to ICF
|
|
hubs. It signifies that the hub hardware has
|
|
detected that an instance of
|
|
rptrPortAutoPartitionState for one of the repeater's
|
|
ports has changed from the 'autoPartitioned' state
|
|
to the 'notAutoPartitioned' state. The current value
|
|
of the instance of the rptrPortAutoPartitionState for
|
|
the port that healed is returned in the PDU."
|
|
::= { hpicf8023RptrTrapsPrefix 6 }
|
|
|
|
|
|
-- Conformance information
|
|
|
|
hpicf8023RptrConformance
|
|
OBJECT IDENTIFIER ::= { hpicf8023RptrMib 1 }
|
|
|
|
hpicf8023RptrCompliances
|
|
OBJECT IDENTIFIER ::= { hpicf8023RptrConformance 1 }
|
|
hpicf8023RptrGroups
|
|
OBJECT IDENTIFIER ::= { hpicf8023RptrConformance 2 }
|
|
|
|
|
|
-- Compliance statements
|
|
|
|
hpicf8023RptrCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS COMPLIANCE IS DEPRECATED *********
|
|
|
|
The compliance statement for HP extensions to the
|
|
802.3 Repeater MIB for HP AdvanceStack 802.3
|
|
repeaters."
|
|
MODULE
|
|
MANDATORY-GROUPS { hpicf8023RptrBasicGroup,
|
|
hpicf8023RptrMonitorGroup,
|
|
hpicf8023RptrNotifyGroup }
|
|
|
|
::= { hpicf8023RptrCompliances 1 }
|
|
|
|
hpicf8023RptrSlaveCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS COMPLIANCE IS DEPRECATED *********
|
|
|
|
The compliance statement for HP extensions to the
|
|
802.3 Repeater MIB for HP AdvanceStack 802.3
|
|
slave repeaters."
|
|
MODULE
|
|
MANDATORY-GROUPS { hpicf8023RptrBasicSlaveGroup,
|
|
hpicf8023RptrMonitorSlaveGroup,
|
|
hpicf8023RptrNotifyGroup }
|
|
|
|
::= { hpicf8023RptrCompliances 2 }
|
|
|
|
hpicf8023MultiRptrCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for HP extensions to the
|
|
802.3 Repeater MIB for HP AdvanceStack 802.3
|
|
repeaters. This compliance supports devices
|
|
with multiple repeater segments, as well as
|
|
devices with a single repeater segment."
|
|
MODULE
|
|
MANDATORY-GROUPS { hpicf8023MultiRptrBasicGroup,
|
|
hpicf8023MultiRptrMonitorGroup,
|
|
hpicf8023MultiRptrNotifyGroup }
|
|
|
|
::= { hpicf8023RptrCompliances 3 }
|
|
|
|
hpicf8023RptrAutoNegCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for HP extensions to the
|
|
802.3 Repeater MIB for HP AdvanceStack 802.3
|
|
repeaters. This compliance supports devices
|
|
with multiple repeater segments, as well as
|
|
devices with a single repeater segment. It also
|
|
supports repeater devices with auto-negotiation."
|
|
MODULE
|
|
MANDATORY-GROUPS { hpicf8023MultiRptrBasicGroup,
|
|
hpicf8023MultiRptrMonitorGroup,
|
|
hpicf8023MultiRptrNotifyGroup }
|
|
|
|
GROUP hpicf8023RpMauAutoNegGroup
|
|
DESCRIPTION "Implementation of this group is required for
|
|
MAUs that support auto-negotiation."
|
|
|
|
::= { hpicf8023RptrCompliances 4 }
|
|
|
|
|
|
-- Units of conformance
|
|
|
|
hpicf8023RptrBasicGroup OBJECT-GROUP
|
|
OBJECTS { hpRptrEntityName,
|
|
hpRptrThinlanFault,
|
|
hpRptrSqeEnabled,
|
|
hpRptrRobustHealing,
|
|
hpRptrGrpGroupIndex,
|
|
hpRptrGrpPortsAdminStatus,
|
|
hpRptrGrpPortsSegStatus,
|
|
hpRptrGrpPortsMediaAvailable,
|
|
hpRptrGrpPortsLinkbeatEnabled,
|
|
hpRptrGrpPortsOperStatus,
|
|
hpRptrPtGroupIndex,
|
|
hpRptrPtPortIndex,
|
|
hpRptrPtLinkbeatEnable,
|
|
hpRptrPtPolarityReversed
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS GROUP IS DEPRECATED *********
|
|
|
|
A collection of HP specific extensions to the
|
|
802.3 Repeater MIB for the HP AdvanceStack product
|
|
line."
|
|
::= { hpicf8023RptrGroups 1 }
|
|
|
|
hpicf8023RptrBasicSlaveGroup OBJECT-GROUP
|
|
OBJECTS { hpRptrEntityName,
|
|
hpRptrThinlanFault,
|
|
hpRptrSqeEnabled,
|
|
hpRptrGrpGroupIndex,
|
|
hpRptrGrpPortsAdminStatus,
|
|
hpRptrGrpPortsSegStatus,
|
|
hpRptrGrpPortsMediaAvailable,
|
|
hpRptrGrpPortsLinkbeatEnabled,
|
|
hpRptrGrpPortsOperStatus,
|
|
hpRptrPtGroupIndex,
|
|
hpRptrPtPortIndex,
|
|
hpRptrPtLinkbeatEnable,
|
|
hpRptrPtPolarityReversed
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS GROUP IS DEPRECATED *********
|
|
|
|
A collection of HP specific extensions to the
|
|
802.3 Repeater MIB for HP AdvanceStack slaves."
|
|
::= { hpicf8023RptrGroups 2 }
|
|
|
|
hpicf8023RptrMonitorGroup OBJECT-GROUP
|
|
OBJECTS { hpRptrMonGlobalFrames,
|
|
hpRptrMonGlobalOctets,
|
|
hpRptrMonGlobalFCSErrors,
|
|
hpRptrMonGlobalAlignmentErrors,
|
|
hpRptrMonGlobalFrameTooLongs,
|
|
hpRptrMonGlobalShortEvents,
|
|
hpRptrMonGlobalRunts,
|
|
hpRptrMonGlobalCollisions,
|
|
hpRptrMonGlobalLateEvents,
|
|
hpRptrMonGlobalVeryLongEvents,
|
|
hpRptrMonGlobalDataRateMismatches,
|
|
hpRptrMonGlobalAutoPartitions,
|
|
hpRptrMonGlobalErrors,
|
|
hpRptrMonGlobalUcastPackets,
|
|
hpRptrMonGlobalBcastPackets,
|
|
hpRptrMonGlobalMcastPackets,
|
|
hpRptrMonPtGroupIndex,
|
|
hpRptrMonPtPortIndex,
|
|
hpRptrMonPtUcastPackets,
|
|
hpRptrMonPtBcastPackets,
|
|
hpRptrMonPtMcastPackets
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS GROUP IS DEPRECATED *********
|
|
|
|
A collection of extended counters for 802.3
|
|
repeaters in the HP AdvanceStack product line."
|
|
::= { hpicf8023RptrGroups 3 }
|
|
|
|
hpicf8023RptrMonitorSlaveGroup OBJECT-GROUP
|
|
OBJECTS { hpRptrMonGlobalFrames,
|
|
hpRptrMonGlobalOctets,
|
|
hpRptrMonGlobalFCSErrors,
|
|
hpRptrMonGlobalAlignmentErrors,
|
|
hpRptrMonGlobalFrameTooLongs,
|
|
hpRptrMonGlobalShortEvents,
|
|
hpRptrMonGlobalRunts,
|
|
hpRptrMonGlobalCollisions,
|
|
hpRptrMonGlobalLateEvents,
|
|
hpRptrMonGlobalVeryLongEvents,
|
|
hpRptrMonGlobalDataRateMismatches,
|
|
hpRptrMonGlobalAutoPartitions,
|
|
hpRptrMonGlobalErrors
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS GROUP IS DEPRECATED *********
|
|
|
|
A collection of extended counters for HP
|
|
AdvanceStack 802.3 slave repeaters."
|
|
::= { hpicf8023RptrGroups 4 }
|
|
|
|
hpicf8023MultiRptrBasicGroup OBJECT-GROUP
|
|
OBJECTS { hpRptrPtGroupIndex,
|
|
hpRptrPtPortIndex,
|
|
hpRptrPtLinkbeatEnable,
|
|
hpRptrPtPolarityReversed,
|
|
hpRptrPtSqeEnabled,
|
|
hpRptrPtMediaAvailTrapEnable,
|
|
hpRptrPtLongCableEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of HP specific extensions to the
|
|
802.3 Repeater MIB for products in the HP
|
|
AdvanceStack product line. This group supports
|
|
devices with multiple repeater segments as well
|
|
as devices with a single repeater segment."
|
|
::= { hpicf8023RptrGroups 5 }
|
|
|
|
hpicf8023MultiRptrMonitorGroup OBJECT-GROUP
|
|
OBJECTS { hpRptrMonPtGroupIndex,
|
|
hpRptrMonPtPortIndex,
|
|
hpRptrMonPtUcastPackets,
|
|
hpRptrMonPtBcastPackets,
|
|
hpRptrMonPtMcastPackets
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of extended counters for 802.3
|
|
repeaters in the HP AdvanceStack product line.
|
|
This group supports devices with multiple
|
|
repeater segments as well as devices with a
|
|
single repeater segment."
|
|
::= { hpicf8023RptrGroups 6 }
|
|
|
|
hpicf8023RptrNotifyGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { hpicfLinkBeatTrap,
|
|
hpicfPartitionTrap
|
|
}
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"********* THIS GROUP IS DEPRECATED *********
|
|
|
|
A collection of notifications used to indicate
|
|
changes in port status for 802.3 repeaters in the
|
|
HP AdvanceStack product line."
|
|
::= { hpicf8023RptrGroups 7 }
|
|
|
|
hpicf8023MultiRptrNotifyGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS { hpicfMediaAvailDetectTrap,
|
|
hpicfMediaAvailLostTrap,
|
|
hpicfPortPartitionTrap,
|
|
hpicfPortHealTrap
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of notifications used to indicate
|
|
changes in port status for 802.3 repeaters in the
|
|
HP AdvanceStack product line. Notifications in
|
|
this group use different traps for good->bad than
|
|
are used for bad->good (similar to linkUp/linkDown)."
|
|
::= { hpicf8023RptrGroups 8 }
|
|
|
|
hpicf8023RpMauAutoNegGroup OBJECT-GROUP
|
|
OBJECTS { hpRpMauTypeList,
|
|
hpRpMauAutoNegSupported,
|
|
hpRpMauAutoNegAdminStatus,
|
|
hpRpMauAutoNegRemoteSignaling,
|
|
hpRpMauAutoNegConfig,
|
|
hpRpMauAutoNegCapReceived,
|
|
hpRpMauAutoNegRestart
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects for managing MAUs attached
|
|
to repeater ports with managed auto-negotiation."
|
|
::= { hpicf8023RptrGroups 9 }
|
|
|
|
hpicf8023Rptr100BasicGroup OBJECT-GROUP
|
|
OBJECTS { hpRptrPtGroupIndex,
|
|
hpRptrPtPortIndex,
|
|
hpRptrPtPolarityReversed,
|
|
hpRptrPtMediaAvailTrapEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of HP specific extensions to the
|
|
802.3 Repeater MIB for products in the HP
|
|
AdvanceStack product line. This group supports
|
|
devices with multiple repeater segments as well
|
|
as devices with a single repeater segment. This
|
|
group supports devices with 100BaseT repeater
|
|
segments."
|
|
::= { hpicf8023RptrGroups 10 }
|
|
|
|
END
|
|
|