mirror of
https://github.com/librenms/librenms.git
synced 2024-10-07 16:52:45 +00:00
438 lines
15 KiB
Plaintext
438 lines
15 KiB
Plaintext
WATCHGUARD-IPSEC-ENDPOINT-PAIR-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Gauge32,
|
|
OBJECT-IDENTITY, enterprises,
|
|
IpAddress FROM SNMPv2-SMI
|
|
watchguard FROM WATCHGUARD-SMI;
|
|
|
|
wgIpsecEndpointPairModule MODULE-IDENTITY
|
|
LAST-UPDATED "200701251200Z"
|
|
ORGANIZATION "WatchGuard Technologies, Inc."
|
|
CONTACT-INFO
|
|
" WatchGuard Technologies, Inc.
|
|
|
|
505 Fifth Avenue South
|
|
Suite 500
|
|
Seattle, WA 98104
|
|
United States
|
|
|
|
+1.206.613.6600 "
|
|
|
|
DESCRIPTION
|
|
"The MIB module describes generic Ipsec Endpoint Pair information
|
|
of WatchGuard system. Mainly, the information
|
|
obtained from this MIB is used to constructed topological
|
|
view of IPSec security gateways that are connected by
|
|
IPSec tunnels.
|
|
|
|
An IPSec Endpoint Pair is a pair of security gateways that
|
|
are connected with 0 or more IPSec SA's in tunnel mode.
|
|
It contains information of aggregated information
|
|
of tunnel mode SA's between two security gateways.
|
|
|
|
An IPSec Endpoint Pair is identified by a pair of IP addresses.
|
|
Therefore, if an IPSec security gateway X has 2 external
|
|
IP addresses while IPsec secruity gateway Y has 3 external
|
|
IP addresses, there are potentially 6 IPsec Endpoint Pairs
|
|
between X and Y."
|
|
|
|
|
|
REVISION "200701251200Z"
|
|
DESCRIPTION
|
|
"Initial revision."
|
|
::= { watchguard 5 }
|
|
|
|
|
|
wgIpsecEndpointPairMIB OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the base object identifier for all IPSec tunnel
|
|
branches."
|
|
::= { wgIpsecEndpointPairModule 1 }
|
|
|
|
wgIpsecEndpointPair OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the base object identifier for all IPSec
|
|
tunnel information."
|
|
::= { wgIpsecEndpointPairMIB 1 }
|
|
|
|
wgIpsecEndpointPairStatistics OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the base object identifier for all objects which
|
|
are global counters for IPSec tunnels."
|
|
::= { wgIpsecEndpointPairMIB 2 }
|
|
|
|
|
|
wgIpsecEndpointPairNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of entries in the wgIpsecEndpointPairTable. "
|
|
::= { wgIpsecEndpointPair 1 }
|
|
|
|
wgIpsecEndpointPairTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WGIpsecEndpointPairEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the connection table describing all current
|
|
IPSec tunnels exist on this entity."
|
|
::= { wgIpsecEndpointPair 2 }
|
|
|
|
|
|
wgIpsecEndpointPairEntry OBJECT-TYPE
|
|
SYNTAX WGIpsecEndpointPairEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the information on a
|
|
IPSec tunnel between two IPSec security gateways."
|
|
INDEX{ wgIpsecEndpointPairIndex }
|
|
::= { wgIpsecEndpointPairTable 1 }
|
|
|
|
WGIpsecEndpointPairEntry ::= SEQUENCE {
|
|
|
|
wgIpsecEndpointPairIndex Integer32,
|
|
|
|
wgIpsecEndpointPairLocalAddr IpAddress,
|
|
wgIpsecEndpointPairPeerAddr IpAddress,
|
|
|
|
|
|
wgIpsecEndpointPairInSAs Unsigned32,
|
|
wgIpsecEndpointPairOutSAs Unsigned32,
|
|
wgIpsecEndpointPairInAccKbytes Counter32,
|
|
wgIpsecEndpointPairOutAccKbytes Counter32,
|
|
wgIpsecEndpointPairInPackets Counter32,
|
|
wgIpsecEndpointPairOutPackets Counter32,
|
|
wgIpsecEndpointPairDecryptErrors Counter32,
|
|
wgIpsecEndpointPairAuthErrors Counter32,
|
|
wgIpsecEndpointPairReplayErrors Counter32,
|
|
wgIpsecEndpointPairPolicyErrors Counter32,
|
|
wgIpsecEndpointPairPadErrors Counter32,
|
|
wgIpsecEndpointPairOtherReceiveErrors Counter32,
|
|
wgIpsecEndpointPairSendErrors Counter32
|
|
|
|
}
|
|
|
|
wgIpsecEndpointPairIndex OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The running index of this IPSec endpoint pair."
|
|
::= { wgIpsecEndpointPairEntry 1 }
|
|
|
|
wgIpsecEndpointPairLocalAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The local IP address of the current IPSec ednpoint pair."
|
|
::= { wgIpsecEndpointPairEntry 2 }
|
|
|
|
wgIpsecEndpointPairPeerAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The remote IP address of the current IPSec endpoint pair."
|
|
::= { wgIpsecEndpointPairEntry 3 }
|
|
|
|
|
|
wgIpsecEndpointPairInSAs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of inbound IPSEC SA's within this
|
|
IPSec endpoint pair.If IKE rekeys and no data
|
|
stream to activate new SA, the SA statistics
|
|
may be include the old SA, then the total number
|
|
is the double of the active SA"
|
|
::= { wgIpsecEndpointPairEntry 4 }
|
|
|
|
wgIpsecEndpointPairOutSAs OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of outbound IPSEC SA's within this
|
|
IPSec endpoint pair.If IKE rekeys and no data
|
|
stream to activate new SA, the SA statistics
|
|
may be include the old SA, then the total number
|
|
is the double of the active SA"
|
|
::= { wgIpsecEndpointPairEntry 5 }
|
|
|
|
wgIpsecEndpointPairInAccKbytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Kbytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total inbound traffic in Kbytes since the establish of
|
|
this connection."
|
|
::= { wgIpsecEndpointPairEntry 6 }
|
|
|
|
wgIpsecEndpointPairOutAccKbytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Kbytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total outound traffic in Kbytes since the establish of
|
|
this connection."
|
|
::= { wgIpsecEndpointPairEntry 7 }
|
|
|
|
wgIpsecEndpointPairInPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of inbound packets since the establish of
|
|
this connection."
|
|
::= { wgIpsecEndpointPairEntry 8 }
|
|
|
|
wgIpsecEndpointPairOutPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of outound packets since the establish of
|
|
this connection."
|
|
::= { wgIpsecEndpointPairEntry 9 }
|
|
|
|
wgIpsecEndpointPairDecryptErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deprecated, currently unused."
|
|
::= { wgIpsecEndpointPairEntry 10 }
|
|
|
|
wgIpsecEndpointPairAuthErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of packets discarded due to authentication
|
|
error since the establish of this connection."
|
|
::= { wgIpsecEndpointPairEntry 11 }
|
|
|
|
wgIpsecEndpointPairReplayErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of packets discarded due to replay
|
|
error since the establish of this connection."
|
|
::= { wgIpsecEndpointPairEntry 12}
|
|
|
|
wgIpsecEndpointPairPolicyErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deprecated, currently unused."
|
|
::= { wgIpsecEndpointPairEntry 13 }
|
|
|
|
wgIpsecEndpointPairPadErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deprecated, currently unused."
|
|
::= { wgIpsecEndpointPairEntry 14 }
|
|
|
|
wgIpsecEndpointPairOtherReceiveErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deprecated, currently unused."
|
|
::= { wgIpsecEndpointPairEntry 15 }
|
|
|
|
wgIpsecEndpointPairSendErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deprecated, currently unused."
|
|
::= { wgIpsecEndpointPairEntry 16 }
|
|
|
|
|
|
-- global statistics
|
|
|
|
wgIpsecEndpointPairTotalInSAs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of active inbound SA's in the entity."
|
|
::= { wgIpsecEndpointPairStatistics 1 }
|
|
|
|
wgIpsecEndpointPairTotalOutSAs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of active outbound SA's in the entity."
|
|
::= { wgIpsecEndpointPairStatistics 2 }
|
|
|
|
wgIpsecEndpointPairTotalInAccKbytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Kbytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total inbound IPsec traffic of this entity."
|
|
::= { wgIpsecEndpointPairStatistics 3 }
|
|
|
|
wgIpsecEndpointPairTotalOutAccKbytes OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total outbound IPsec traffic of this entity."
|
|
::= { wgIpsecEndpointPairStatistics 4 }
|
|
|
|
wgIpsecEndpointPairTotalInPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
UNITS "Kbytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total inbound IPsec packets of this entity."
|
|
::= { wgIpsecEndpointPairStatistics 5 }
|
|
|
|
wgIpsecEndpointPairTotalOutPackets OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total outbound IPsec packets of this entity."
|
|
::= { wgIpsecEndpointPairStatistics 6 }
|
|
|
|
|
|
wgIpsecEndpointPairTotalDecryptErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deprecated, currently unused."
|
|
::= { wgIpsecEndpointPairStatistics 7 }
|
|
|
|
wgIpsecEndpointPairTotalAuthErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of packets on this entity discarded
|
|
due to authentication errors."
|
|
::= { wgIpsecEndpointPairStatistics 8 }
|
|
|
|
wgIpsecEndpointPairTotalReplayErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total number of packets discarded due to replay
|
|
errors on this entity."
|
|
::= { wgIpsecEndpointPairStatistics 9 }
|
|
|
|
wgIpsecEndpointPairTotalPolicyErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deprecated, currently unused."
|
|
::= { wgIpsecEndpointPairStatistics 10 }
|
|
|
|
wgIpsecEndpointPairTotalPadErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deprecated, currently unused."
|
|
::= { wgIpsecEndpointPairStatistics 11 }
|
|
|
|
wgIpsecEndpointPairTotalOtherReceiveErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deprecated, currently unused."
|
|
::= { wgIpsecEndpointPairStatistics 12 }
|
|
|
|
wgIpsecEndpointPairTotalSendErrors OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Deprecated, currently unused."
|
|
::= { wgIpsecEndpointPairStatistics 13 }
|
|
|
|
wgIpsecEndpointPairPeerIPToTunnel OBJECT-IDENTITY
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the base object identifier for all tunnels
|
|
information of the policies."
|
|
::= {wgIpsecEndpointPairMIB 3}
|
|
|
|
wgIpsecEndpointPairPeerIPToTunnelNum OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of tunnels in the peeriptotunnel table. "
|
|
::= { wgIpsecEndpointPairPeerIPToTunnel 1 }
|
|
|
|
wgIpsecEndpointPairPeerIPToTunnelTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF WGIpsecEndpointPairPeerIPToTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peeriptotunnel table in the endpointpair mib."
|
|
::= { wgIpsecEndpointPairPeerIPToTunnel 2 }
|
|
|
|
wgIpsecEndpointPairPeerIPToTunnelEntry OBJECT-TYPE
|
|
SYNTAX WGIpsecEndpointPairPeerIPToTunnelEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry (conceptual row) containing the peer ip and tunnel
|
|
information."
|
|
INDEX {
|
|
wgIpsecEndpointPairPeerIPToTunnelPeerIP,
|
|
wgIpsecEndpointPairPeerIPToTunnelTunnelID
|
|
}
|
|
::= { wgIpsecEndpointPairPeerIPToTunnelTable 1 }
|
|
|
|
WGIpsecEndpointPairPeerIPToTunnelEntry ::= SEQUENCE {
|
|
|
|
wgIpsecEndpointPairPeerIPToTunnelPeerIP IpAddress,
|
|
wgIpsecEndpointPairPeerIPToTunnelTunnelID Unsigned32
|
|
}
|
|
|
|
wgIpsecEndpointPairPeerIPToTunnelPeerIP OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The peer ip of the peeriptotunnel table."
|
|
::= {wgIpsecEndpointPairPeerIPToTunnelEntry 1}
|
|
|
|
wgIpsecEndpointPairPeerIPToTunnelTunnelID OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The tunnel id of the peeriptotunnel table."
|
|
::= {wgIpsecEndpointPairPeerIPToTunnelEntry 2}
|
|
|
|
END
|
|
|