librenms-librenms/mibs/avtech/ROOMALERT32S-MIB

--
--defines ROOMALERT32S-MIB for SNMP agent extension of Room Alert 32S
--Contents:	Global Registration Module
--		Room Alert OIDs - Enterprise 20916
--Version:	1.1.0
--Developed By: AVTECH Software, Inc.

--
--Copyright (c) 2019 AVTECH Software, Inc.
--

ROOMALERT32S-MIB DEFINITIONS ::= BEGIN


IMPORTS
	enterprises
		FROM RFC1155-SMI
	OBJECT-TYPE
		FROM RFC-1212;


avtech	OBJECT IDENTIFIER ::= { enterprises 20916 }
products	OBJECT IDENTIFIER ::= { avtech 1 }
roomalert32S	OBJECT IDENTIFIER ::= { products 11 }
sensors	OBJECT IDENTIFIER ::= { roomalert32S 1 }
internal	OBJECT IDENTIFIER ::= { sensors 1 }
temperature	OBJECT IDENTIFIER ::= { internal 1 }
humidity	OBJECT IDENTIFIER ::= { internal 2 }
power		OBJECT IDENTIFIER ::= { internal 3 }
heat-index	OBJECT IDENTIFIER ::= { internal 4 }
analog	OBJECT IDENTIFIER ::= { internal 5 }
relay       OBJECT IDENTIFIER ::= { internal 6 }
dew-point	OBJECT IDENTIFIER ::= { internal 7 }
digital	OBJECT IDENTIFIER ::= { sensors 2 }
digital-sen1	OBJECT IDENTIFIER ::= { digital 1 }
digital-sen2	OBJECT IDENTIFIER ::= { digital 2 }
digital-sen3	OBJECT IDENTIFIER ::= { digital 3 }
digital-sen4	OBJECT IDENTIFIER ::= { digital 4 }
digital-sen5	OBJECT IDENTIFIER ::= { digital 5 }
digital-sen6	OBJECT IDENTIFIER ::= { digital 6 }
digital-sen7	OBJECT IDENTIFIER ::= { digital 7 }
digital-sen8	OBJECT IDENTIFIER ::= { digital 8 }
switch	OBJECT IDENTIFIER ::= { sensors 3 }
traps	OBJECT IDENTIFIER ::= { roomalert32S 2 }
externalrelays OBJECT IDENTIFIER ::= { roomalert32S 3 }
externalrelay1 OBJECT IDENTIFIER ::= { externalrelays 1 }
externalrelay2 OBJECT IDENTIFIER ::= { externalrelays 2 }

-- Room Alert 32S MIB
-- Parameters


internal-tempf OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The internal temperature reading in Fahrenheit."
::= { temperature 1 }

internal-tempc OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The internal temperature reading in Celsius."
::= { temperature 2 }

internal-humidity OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The internal relative humidity reading in %RH."
::= { humidity 1 }

internal-heat-index OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		optional
	DESCRIPTION	"The internal heat index reading in Fahrenheit."
::= { heat-index 1 }

internal-heat-indexC OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		optional
	DESCRIPTION	"The internal heat index reading in Celsius."
::= { heat-index 2 }

internal-power OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current status of the Room Alert 32S power supply. A '1' indicates the unit is running on AC/Utility power. A '0' indicates the unit is running on battery backup power."
::= { power 1 }

internal-analog1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current status of the Room Alert 32S analog input (0-5VDC)."
::= { analog 1 }

internal-analog2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current status of the Room Alert 32S analog input (0-5VDC)."
::= { analog 2 }

internal-relay1 OBJECT-TYPE
	SYNTAX		INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the on-board relay output"
::= { relay 1 }

internal-relay2 OBJECT-TYPE
	SYNTAX		INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the on-board relay output"
::= { relay 2 }

internal-dew-point-c OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		optional
	DESCRIPTION	"The internal dew-point reading in Celsius."
::= { dew-point 1 }

internal-dew-point-f OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		optional
	DESCRIPTION	"The internal dew-point reading in Fahrenheit."
::= { dew-point 2 }

digital-sen1-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor's current temperature in Celsius."
::= { digital-sen1 1 }

digital-sen1-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor's current temperature in Fahrenheit."
::= { digital-sen1 2 }

digital-sen1-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current % relative humidity, voltage reading (V), power state (1=Power Detected, 0=No Power Detected), thermocouple temperature (C), or air speed (m/s)."
::= { digital-sen1 3 }

digital-sen1-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current heat index (F), custom analog reading, thermocouple temperature (F), or air speed (f/m)."
::= { digital-sen1 4 }

digital-sen1-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current heat index (C), thermocouple fault code (0=No Fault), or air flow (CMH)."
::= { digital-sen1 5 }


digital-sen1-6 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current dew point (C) or air flow (CFM)."
::= { digital-sen1 6 }

digital-sen1-7 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current dew point (F)."
::= { digital-sen1 7 }

digital-sen2-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor's current temperature in Celsius."
::= { digital-sen2 1 }

digital-sen2-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor's current temperature in Fahrenheit."
::= { digital-sen2 2 }

digital-sen2-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current % relative humidity, voltage reading (V), power state (1=Power Detected, 0=No Power Detected), thermocouple temperature (C), or air speed (m/s)."
::= { digital-sen2 3 }

digital-sen2-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current heat index (F), custom analog reading, thermocouple temperature (F), or air speed (f/m)."
::= { digital-sen2 4 }

digital-sen2-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current heat index (C), thermocouple fault code (0=No Fault), or air flow (CMH)."
::= { digital-sen2 5 }


digital-sen2-6 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current dew point (C) or air flow (CFM)."
::= { digital-sen2 6 }

digital-sen2-7 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current dew point (F)."
::= { digital-sen2 7 }

digital-sen3-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor's current temperature in Celsius."
::= { digital-sen3 1 }

digital-sen3-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor's current temperature in Fahrenheit."
::= { digital-sen3 2 }

digital-sen3-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current % relative humidity, voltage reading (V), power state (1=Power Detected, 0=No Power Detected), thermocouple temperature (C), or air speed (m/s)."
::= { digital-sen3 3 }

digital-sen3-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current heat index (F), custom analog reading, thermocouple temperature (F), or air speed (f/m)."
::= { digital-sen3 4 }

digital-sen3-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current heat index (C), thermocouple fault code (0=No Fault), or air flow (CMH)."
::= { digital-sen3 5 }


digital-sen3-6 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current dew point (C) or air flow (CFM)."
::= { digital-sen3 6 }

digital-sen3-7 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current dew point (F)."
::= { digital-sen3 7 }

digital-sen4-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor's current temperature in Celsius."
::= { digital-sen4 1 }

digital-sen4-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor's current temperature in Fahrenheit."
::= { digital-sen4 2 }

digital-sen4-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current % relative humidity, voltage reading (V), power state (1=Power Detected, 0=No Power Detected), thermocouple temperature (C), or air speed (m/s)."
::= { digital-sen4 3 }

digital-sen4-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current heat index (F), custom analog reading, thermocouple temperature (F), or air speed (f/m)."
::= { digital-sen4 4 }

digital-sen4-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current heat index (C), thermocouple fault code (0=No Fault), or air flow (CMH)."
::= { digital-sen4 5 }


digital-sen4-6 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current dew point (C) or air flow (CFM)."
::= { digital-sen4 6 }

digital-sen4-7 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current dew point (F)."
::= { digital-sen4 7 }

digital-sen5-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor's current temperature in Celsius."
::= { digital-sen5 1 }

digital-sen5-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor's current temperature in Fahrenheit."
::= { digital-sen5 2 }

digital-sen5-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current % relative humidity, voltage reading (V), power state (1=Power Detected, 0=No Power Detected), thermocouple temperature (C), or air speed (m/s)."
::= { digital-sen5 3 }

digital-sen5-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current heat index (F), custom analog reading, thermocouple temperature (F), or air speed (f/m)."
::= { digital-sen5 4 }

digital-sen5-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current heat index (C), thermocouple fault code (0=No Fault), or air flow (CMH)."
::= { digital-sen5 5 }


digital-sen5-6 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current dew point (C) or air flow (CFM)."
::= { digital-sen5 6 }

digital-sen5-7 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current dew point (F)."
::= { digital-sen5 7 }

digital-sen6-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor's current temperature in Celsius."
::= { digital-sen6 1 }

digital-sen6-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor's current temperature in Fahrenheit."
::= { digital-sen6 2 }

digital-sen6-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current % relative humidity, voltage reading (V), power state (1=Power Detected, 0=No Power Detected), thermocouple temperature (C), or air speed (m/s)."
::= { digital-sen6 3 }

digital-sen6-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current heat index (F), custom analog reading, thermocouple temperature (F), or air speed (f/m)."
::= { digital-sen6 4 }

digital-sen6-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current heat index (C), thermocouple fault code (0=No Fault), or air flow (CMH)."
::= { digital-sen6 5 }


digital-sen6-6 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current dew point (C) or air flow (CFM)."
::= { digital-sen6 6 }

digital-sen6-7 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current dew point (F)."
::= { digital-sen6 7 }

digital-sen7-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor's current temperature in Celsius."
::= { digital-sen7 1 }

digital-sen7-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor's current temperature in Fahrenheit."
::= { digital-sen7 2 }

digital-sen7-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current % relative humidity, voltage reading (V), power state (1=Power Detected, 0=No Power Detected), thermocouple temperature (C), or air speed (m/s)."
::= { digital-sen7 3 }

digital-sen7-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current heat index (F), custom analog reading, thermocouple temperature (F), or air speed (f/m)."
::= { digital-sen7 4 }

digital-sen7-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current heat index (C), thermocouple fault code (0=No Fault), or air flow (CMH)."
::= { digital-sen7 5 }


digital-sen7-6 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current dew point (C) or air flow (CFM)."
::= { digital-sen7 6 }

digital-sen7-7 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current dew point (F)."
::= { digital-sen7 7 }

digital-sen8-1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor's current temperature in Celsius."
::= { digital-sen8 1 }

digital-sen8-2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The sensor's current temperature in Fahrenheit."
::= { digital-sen8 2 }

digital-sen8-3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current % relative humidity, voltage reading (V), power state (1=Power Detected, 0=No Power Detected), thermocouple temperature (C), or air speed (m/s)."
::= { digital-sen8 3 }

digital-sen8-4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current heat index (F), custom analog reading, thermocouple temperature (F), or air speed (f/m)."
::= { digital-sen8 4 }

digital-sen8-5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current heat index (C), thermocouple fault code (0=No Fault), or air flow (CMH)."
::= { digital-sen8 5 }


digital-sen8-6 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current dew point (C) or air flow (CFM)."
::= { digital-sen8 6 }

digital-sen8-7 OBJECT-TYPE
	SYNTAX  	INTEGER(0..65535)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Varies by sensor type: current dew point (F)."
::= { digital-sen8 7 }

switch-sen1 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 1 (0 = OPEN, 1 = CLOSED)."
::= { switch 1 }

switch-sen2 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 2 (0 = OPEN, 1 = CLOSED)."
::= { switch 2 }

switch-sen3 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 3 (0 = OPEN, 1 = CLOSED)."
::= { switch 3 }

switch-sen4 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 4 (0 = OPEN, 1 = CLOSED)."
::= { switch 4 }

switch-sen5 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 5 (0 = OPEN, 1 = CLOSED)."
::= { switch 5 }

switch-sen6 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 6 (0 = OPEN, 1 = CLOSED)."
::= { switch 6 }

switch-sen7 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 7 (0 = OPEN, 1 = CLOSED)."
::= { switch 7 }

switch-sen8 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 8 (0 = OPEN, 1 = CLOSED)."
::= { switch 8 }

switch-sen9 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 9 (0 = OPEN, 1 = CLOSED)."
::= { switch 9 }

switch-sen10 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 10 (0 = OPEN, 1 = CLOSED)."
::= { switch 10 }

switch-sen11 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 11 (0 = OPEN, 1 = CLOSED)."
::= { switch 11 }

switch-sen12 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 12 (0 = OPEN, 1 = CLOSED)."
::= { switch 12 }

switch-sen13 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 13 (0 = OPEN, 1 = CLOSED)."
::= { switch 13 }

switch-sen14 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 14 (0 = OPEN, 1 = CLOSED)."
::= { switch 14 }

switch-sen15 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 15 (0 = OPEN, 1 = CLOSED)."
::= { switch 15 }

switch-sen16 OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The reading for switch sensor 16 (0 = OPEN, 1 = CLOSED)."
::= { switch 16 }

alarmmessage OBJECT-TYPE
	SYNTAX  	OCTET STRING
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"Last Alarm Message"
::= { traps 1 }


-- externalrelay1

externalrelay1-element-one OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the first element on external relay 1."
::= { externalrelay1 1 }

externalrelay1-element-two OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the second element on external relay 1."
::= { externalrelay1 2 }

externalrelay1-element-three OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the third element on external relay 1."
::= { externalrelay1 3 }

externalrelay1-element-four OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the fourth element on external relay 1."
::= { externalrelay1 4 }

externalrelay1-element-five OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the fifth element on external relay 1."
::= { externalrelay1 5 }

externalrelay1-element-six OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the sixth element on external relay 1."
::= { externalrelay1 6 }

externalrelay1-element-seven OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the seventh element on external relay 1."
::= { externalrelay1 7 }

externalrelay1-element-eight OBJECT-TYPE
	SYNTAX		INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the eighth element on external relay 1"
::= { externalrelay1 8 }


-- externalrelay2

externalrelay2-element-one OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the first element on external relay 2."
::= { externalrelay2 1 }

externalrelay2-element-two OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the second element on external relay 2."
::= { externalrelay2 2 }

externalrelay2-element-three OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the third element on external relay 2."
::= { externalrelay2 3 }

externalrelay2-element-four OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the fourth element on external relay 2."
::= { externalrelay2 4 }

externalrelay2-element-five OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the fifth element on external relay 2."
::= { externalrelay2 5 }

externalrelay2-element-six OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the sixth element on external relay 2."
::= { externalrelay2 6 }

externalrelay2-element-seven OBJECT-TYPE
	SYNTAX  	INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the seventh element on external relay 2."
::= { externalrelay2 7 }

externalrelay2-element-eight OBJECT-TYPE
	SYNTAX		INTEGER(0..1)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The status of the eighth element on external relay 2"
::= { externalrelay2 8 }

END