mirror of
https://github.com/librenms/librenms.git
synced 2024-10-07 16:52:45 +00:00
AdamB
d90a704fcb
* Increase the column width of entPhysicalIndex and entPhysicalIndex_measured * Update schema * Remove unchanged change * Update test data * Remove migration and update test data * Fix hirschmann and junos * One too many * Potentially incorrect usage * Another potentially incorrect usage * Revert changes to cisco and dell * Test data changes for loop-telecom and ups-nut
357 lines
18 KiB
YAML
357 lines
18 KiB
YAML
mib: JUNIPER-IFOPTICS-MIB:JNX-OPT-IF-EXT-MIB:IF-MIB:JUNIPER-MIB:JUNIPER-SRX5000-SPU-MONITORING-MIB:JUNIPER-ALARM-MIB:JUNIPER-VIRTUALCHASSIS-MIB:JUNIPER-VIRTUALCHASSIS-MIB:JUNIPER-RPM-MIB:POWER-ETHERNET-MIB
|
|
modules:
|
|
mempools:
|
|
data:
|
|
-
|
|
oid: JUNIPER-MIB::jnxOperatingTable
|
|
total: JUNIPER-MIB::jnxOperatingMemory
|
|
percent_used: JUNIPER-MIB::jnxOperatingBuffer
|
|
descr: '{{ JUNIPER-MIB::jnxOperatingDescr }}'
|
|
precision: 1048576
|
|
skip_values:
|
|
-
|
|
oid: JUNIPER-MIB::jnxOperatingMemory
|
|
op: '='
|
|
value: 0
|
|
-
|
|
oid: JUNIPER-MIB::jnxOperatingDescr
|
|
op: 'regex'
|
|
value: '/(fan|sensor)/i'
|
|
-
|
|
oid: JUNIPER-SRX5000-SPU-MONITORING-MIB::jnxJsSPUMonitoringObjectsEntry
|
|
percent_used: JUNIPER-SRX5000-SPU-MONITORING-MIB::jnxJsSPUMonitoringMemoryUsage
|
|
descr: '{{ $JUNIPER-SRX5000-SPU-MONITORING-MIB::jnxJsSPUMonitoringNodeDescr }} SPU {{ $JUNIPER-SRX5000-SPU-MONITORING-MIB::jnxJsSPUMonitoringFPCIndex }}/{{ $JUNIPER-SRX5000-SPU-MONITORING-MIB::jnxJsSPUMonitoringSPUIndex }}'
|
|
processors:
|
|
data:
|
|
-
|
|
oid: jnxOperatingTable
|
|
value: jnxOperatingCPU
|
|
num_oid: '.1.3.6.1.4.1.2636.3.1.13.1.8.{{ $index }}'
|
|
descr: jnxOperatingDescr
|
|
skip_values:
|
|
-
|
|
oid: jnxOperatingMemory
|
|
op: '='
|
|
value: 0
|
|
-
|
|
oid: jnxOperatingDescr
|
|
op: 'regex'
|
|
value: '/(fan|sensor)/i'
|
|
-
|
|
oid: jnxJsSPUMonitoringObjectsEntry
|
|
value: jnxJsSPUMonitoringCPUUsage
|
|
num_oid: '.1.3.6.1.4.1.2636.3.39.1.12.1.1.1.4.{{ $index }}'
|
|
descr: '{{ $jnxJsSPUMonitoringNodeDescr }} SPU {{ $jnxJsSPUMonitoringFPCIndex }}/{{ $jnxJsSPUMonitoringSPUIndex }}'
|
|
sensors:
|
|
pre-cache:
|
|
data:
|
|
-
|
|
oid:
|
|
- ifDescr
|
|
- jnxFruName
|
|
ber:
|
|
data:
|
|
-
|
|
oid: JNX-OPT-IF-EXT-MIB::jnxoptIfOTNPMFECCurrentTable
|
|
value: JNX-OPT-IF-EXT-MIB::jnxoptIfOTNPMCurrentFECBERMantissa
|
|
num_oid: '.1.3.6.1.4.1.2636.3.73.1.3.3.8.1.5.{{ $index }}'
|
|
snmp_flags: '-OteQUb'
|
|
divisor: '1.0E+{{ JNX-OPT-IF-EXT-MIB::jnxoptIfOTNPMCurrentFECBERExponent }}'
|
|
descr: '{{ ifDescr:0 }} preFEC BER'
|
|
entPhysicalIndex: '{{ $subindex0 }}'
|
|
entPhysicalIndex_measured: 'ports'
|
|
chromatic_dispersion:
|
|
data:
|
|
-
|
|
oid: jnxOpticsPMCurrentTable
|
|
value: jnxPMCurChromaticDispersion
|
|
num_oid: '.1.3.6.1.4.1.2636.3.71.1.2.1.1.1.{{ $index }}'
|
|
entPhysicalIndex: '{{ $index }}'
|
|
entPhysicalIndex_measured: 'ports'
|
|
descr: '{{ $ifDescr }} CD'
|
|
index: 'jnxPMCurChromaticDispersion.{{ $index }}'
|
|
delay:
|
|
data:
|
|
-
|
|
oid: jnxOpticsPMCurrentTable
|
|
value: jnxPMCurDiffGroupDelay
|
|
num_oid: '.1.3.6.1.4.1.2636.3.71.1.2.1.1.2.{{ $index }}'
|
|
entPhysicalIndex: '{{ $index }}'
|
|
entPhysicalIndex_measured: 'ports'
|
|
divisor: 1000000000000
|
|
descr: '{{ $ifDescr }} DGD'
|
|
index: 'jnxPMCurDiffGroupDelay.{{ $index }}'
|
|
dbm:
|
|
data:
|
|
-
|
|
oid: JUNIPER-DOM-MIB::jnxDomCurrentTable
|
|
value: JUNIPER-DOM-MIB::jnxDomCurrentRxLaserPower
|
|
num_oid: '.1.3.6.1.4.1.2636.3.60.1.1.1.1.5.{{ $index }}'
|
|
descr: '{{ $ifDescr }} Rx Power'
|
|
divisor: 100
|
|
skip_values: 0
|
|
low_limit: JUNIPER-DOM-MIB::jnxDomCurrentRxLaserPowerLowAlarmThreshold
|
|
low_warn_limit: JUNIPER-DOM-MIB::jnxDomCurrentRxLaserPowerLowWarningThreshold
|
|
high_limit: JUNIPER-DOM-MIB::jnxDomCurrentRxLaserPowerHighAlarmThreshold
|
|
warn_limit: JUNIPER-DOM-MIB::jnxDomCurrentRxLaserPowerHighWarningThreshold
|
|
entPhysicalIndex: '{{ $index }}'
|
|
entPhysicalIndex_measured: 'ports'
|
|
index: 'rx-{{ $index }}'
|
|
group: 'Modules'
|
|
-
|
|
oid: JUNIPER-DOM-MIB::jnxDomCurrentTable
|
|
value: JUNIPER-DOM-MIB::jnxDomCurrentTxLaserOutputPower
|
|
num_oid: '.1.3.6.1.4.1.2636.3.60.1.1.1.1.7.{{ $index }}'
|
|
descr: '{{ $ifDescr }} Tx Power'
|
|
divisor: 100
|
|
skip_values: 0
|
|
low_limit: JUNIPER-DOM-MIB::jnxDomCurrentTxLaserOutputPowerLowAlarmThreshold
|
|
low_warn_limit: JUNIPER-DOM-MIB::jnxDomCurrentTxLaserOutputPowerLowWarningThreshold
|
|
high_limit: JUNIPER-DOM-MIB::jnxDomCurrentTxLaserOutputPowerHighAlarmThreshold
|
|
warn_limit: JUNIPER-DOM-MIB::jnxDomCurrentTxLaserOutputPowerHighWarningThreshold
|
|
entPhysicalIndex: '{{ $index }}'
|
|
entPhysicalIndex_measured: 'ports'
|
|
index: 'tx-{{ $index }}'
|
|
group: 'Modules'
|
|
-
|
|
oid: JUNIPER-DOM-MIB::jnxDomModuleLaneTable
|
|
value: JUNIPER-DOM-MIB::jnxDomCurrentLaneRxLaserPower
|
|
num_oid: '.1.3.6.1.4.1.2636.3.60.1.2.1.1.6.{{ $index }}'
|
|
descr: '{{ ifDescr:0 }} lane {{ $subindex1 }} Rx Power'
|
|
divisor: 100
|
|
skip_values: 0
|
|
low_limit: JUNIPER-DOM-MIB::jnxDomCurrentRxLaserPowerLowAlarmThreshold:0
|
|
low_warn_limit: JUNIPER-DOM-MIB::jnxDomCurrentRxLaserPowerLowWarningThreshold:0
|
|
high_limit: JUNIPER-DOM-MIB::jnxDomCurrentRxLaserPowerHighAlarmThreshold:0
|
|
warn_limit: JUNIPER-DOM-MIB::jnxDomCurrentRxLaserPowerHighWarningThreshold:0
|
|
entPhysicalIndex: '{{ $subindex0 }}'
|
|
entPhysicalIndex_measured: 'ports'
|
|
index: 'rx-{{ $index }}'
|
|
group: 'Modules'
|
|
-
|
|
oid: JUNIPER-DOM-MIB::jnxDomModuleLaneTable
|
|
value: JUNIPER-DOM-MIB::jnxDomCurrentLaneTxLaserOutputPower
|
|
num_oid: '.1.3.6.1.4.1.2636.3.60.1.2.1.1.8.{{ $index }}'
|
|
descr: '{{ ifDescr:0 }} lane {{ $subindex1 }} Tx Power'
|
|
divisor: 100
|
|
skip_values: 0
|
|
low_limit: JUNIPER-DOM-MIB::jnxDomCurrentTxLaserOutputPowerLowAlarmThreshold:0
|
|
low_warn_limit: JUNIPER-DOM-MIB::jnxDomCurrentTxLaserOutputPowerLowWarningThreshold:0
|
|
high_limit: JUNIPER-DOM-MIB::jnxDomCurrentTxLaserOutputPowerHighAlarmThreshold:0
|
|
warn_limit: JUNIPER-DOM-MIB::jnxDomCurrentTxLaserOutputPowerHighWarningThreshold:0
|
|
entPhysicalIndex: '{{ $subindex0 }}'
|
|
entPhysicalIndex_measured: 'ports'
|
|
index: 'tx-{{ $index }}'
|
|
group: 'Modules'
|
|
-
|
|
oid: jnxOpticsPMCurrentTable
|
|
value: jnxPMCurRxInputPower
|
|
num_oid: '.1.3.6.1.4.1.2636.3.71.1.2.1.1.8.{{ $index }}'
|
|
entPhysicalIndex: '{{ $index }}'
|
|
entPhysicalIndex_measured: 'ports'
|
|
divisor: 100
|
|
descr: '{{ $ifDescr }} Rx Power'
|
|
index: 'jnxPMCurRxInputPower.{{ $index }}'
|
|
-
|
|
oid: jnxOpticsPMCurrentTable
|
|
value: jnxPMCurTxOutputPower
|
|
num_oid: '.1.3.6.1.4.1.2636.3.71.1.2.1.1.7.{{ $index }}'
|
|
entPhysicalIndex: '{{ $index }}'
|
|
entPhysicalIndex_measured: 'ports'
|
|
divisor: 100
|
|
descr: '{{ $ifDescr }} Tx Power'
|
|
index: 'jnxPMCurTxOutputPower.{{ $index }}'
|
|
quality_factor:
|
|
data:
|
|
-
|
|
oid: jnxOpticsPMCurrentTable
|
|
value: jnxPMCurQ
|
|
num_oid: '.1.3.6.1.4.1.2636.3.71.1.2.1.1.5.{{ $index }}'
|
|
entPhysicalIndex: '{{ $index }}'
|
|
entPhysicalIndex_measured: 'ports'
|
|
divisor: 10
|
|
descr: '{{ $ifDescr }} Q2-factor'
|
|
index: 'jnxPMCurQ.{{ $index }}'
|
|
snr:
|
|
data:
|
|
-
|
|
oid: jnxOpticsPMCurrentTable
|
|
value: jnxPMCurSNR
|
|
num_oid: '.1.3.6.1.4.1.2636.3.71.1.2.1.1.6.{{ $index }}'
|
|
entPhysicalIndex: '{{ $index }}'
|
|
entPhysicalIndex_measured: 'ports'
|
|
divisor: 10
|
|
descr: '{{ $ifDescr }} electrical SNR'
|
|
index: 'jnxPMCurSNR.{{ $index }}'
|
|
frequency:
|
|
data:
|
|
-
|
|
oid: jnxOpticsPMCurrentTable
|
|
value: jnxPMCurCarFreqOffset
|
|
num_oid: '.1.3.6.1.4.1.2636.3.71.1.2.1.1.43.{{ $index }}'
|
|
entPhysicalIndex: '{{ $index }}'
|
|
entPhysicalIndex_measured: 'ports'
|
|
multiplier: 1000000
|
|
descr: '{{ $ifDescr }} Carrier Freq Offset'
|
|
index: 'jnxPMCurCarFreqOffset.{{ $index }}'
|
|
temperature:
|
|
data:
|
|
-
|
|
oid: JUNIPER-MIB::jnxOperatingTable
|
|
value: JUNIPER-MIB::jnxOperatingTemp
|
|
num_oid: '.1.3.6.1.4.1.2636.3.1.13.1.7.{{ $index }}'
|
|
descr: JUNIPER-MIB::jnxOperatingDescr
|
|
skip_values: 0
|
|
-
|
|
oid: JUNIPER-DOM-MIB::jnxDomCurrentTable
|
|
value: JUNIPER-DOM-MIB::jnxDomCurrentModuleTemperature
|
|
num_oid: '.1.3.6.1.4.1.2636.3.60.1.1.1.1.8.{{ $index }}'
|
|
descr: '{{ $ifDescr }} Temperature'
|
|
skip_values: 0
|
|
low_limit: JUNIPER-DOM-MIB::jnxDomCurrentModuleTemperatureLowAlarmThreshold
|
|
low_warn_limit: JUNIPER-DOM-MIB::jnxDomCurrentModuleTemperatureLowWarningThreshold
|
|
high_limit: JUNIPER-DOM-MIB::jnxDomCurrentModuleTemperatureHighAlarmThreshold
|
|
warn_limit: JUNIPER-DOM-MIB::jnxDomCurrentModuleTemperatureHighWarningThreshold
|
|
entPhysicalIndex: '{{ $index }}'
|
|
entPhysicalIndex_measured: 'ports'
|
|
index: 'rx-{{ $index }}' # match old php discovery
|
|
group: 'Modules'
|
|
-
|
|
oid: jnxOpticsPMCurrentTable
|
|
value: jnxPMCurTemperature
|
|
num_oid: '.1.3.6.1.4.1.2636.3.71.1.2.1.1.39.{{ $index }}'
|
|
entPhysicalIndex: '{{ $index }}'
|
|
entPhysicalIndex_measured: 'ports'
|
|
descr: '{{ $ifDescr }} Temperature'
|
|
index: 'jnxPMCurTemperature.{{ $index }}'
|
|
group: 'Modules'
|
|
current:
|
|
data:
|
|
-
|
|
oid: JUNIPER-DOM-MIB::jnxDomCurrentTable
|
|
value: JUNIPER-DOM-MIB::jnxDomCurrentTxLaserBiasCurrent
|
|
num_oid: '.1.3.6.1.4.1.2636.3.60.1.1.1.1.6.{{ $index }}'
|
|
descr: '{{ $ifDescr }} Tx Current'
|
|
divisor: 1000000
|
|
skip_values: 0
|
|
low_limit: JUNIPER-DOM-MIB::jnxDomCurrentTxLaserBiasCurrentLowAlarmThreshold
|
|
low_warn_limit: JUNIPER-DOM-MIB::jnxDomCurrentTxLaserBiasCurrentLowWarningThreshold
|
|
high_limit: JUNIPER-DOM-MIB::jnxDomCurrentTxLaserBiasCurrentHighAlarmThreshold
|
|
warn_limit: JUNIPER-DOM-MIB::jnxDomCurrentTxLaserBiasCurrentHighWarningThreshold
|
|
entPhysicalIndex: '{{ $index }}'
|
|
entPhysicalIndex_measured: 'ports'
|
|
index: 'rx-{{ $index }}'
|
|
group: 'Modules'
|
|
-
|
|
oid: jnxOpticsPMCurrentTable
|
|
value: jnxPMCurTxLaserBiasCurrent
|
|
num_oid: '.1.3.6.1.4.1.2636.3.71.1.2.1.1.35.{{ $index }}'
|
|
entPhysicalIndex: '{{ $index }}'
|
|
entPhysicalIndex_measured: 'ports'
|
|
divisor: 1000
|
|
descr: '{{ $ifDescr }} Tx Bias'
|
|
index: 'jnxPMCurTxLaserBiasCurrent.{{ $index }}'
|
|
loss:
|
|
data:
|
|
-
|
|
oid: jnxRpmResultsSummaryTable
|
|
value: jnxRpmResSumPercentLost
|
|
num_oid: '.1.3.6.1.4.1.2636.3.50.1.2.1.{{ $index_string }}'
|
|
group: RPM Probes
|
|
descr: '{{ $index }} Probe Loss'
|
|
index: 'jnxRpmResSumPercentLost.{{ $index }}'
|
|
count:
|
|
data:
|
|
-
|
|
oid: jnxJsSPUMonitoringObjectsTable
|
|
value: jnxJsSPUMonitoringCurrentFlowSession
|
|
num_oid: '.1.3.6.1.4.1.2636.3.39.1.12.1.1.1.6.{{ $index }}'
|
|
high_limit: jnxJsSPUMonitoringMaxFlowSession
|
|
group: Sessions
|
|
descr: 'Node {{ $jnxJsSPUMonitoringNodeIndex }} FPC {{ $jnxJsSPUMonitoringFPCIndex }} SPU {{ $jnxJsSPUMonitoringSPUIndex }} Flow Count'
|
|
index: 'jnxJsSPUMonitoringCurrentFlowSession.{{ $index }}'
|
|
skip_values:
|
|
- 0
|
|
-
|
|
oid: jnxJsSPUMonitoringObjectsTable
|
|
value: jnxJsSPUMonitoringCurrentCPSession
|
|
num_oid: '.1.3.6.1.4.1.2636.3.39.1.12.1.1.1.8.{{ $index }}'
|
|
high_limit: jnxJsSPUMonitoringMaxCPSession
|
|
group: Sessions
|
|
descr: 'Node {{ $jnxJsSPUMonitoringNodeIndex }} FPC {{ $jnxJsSPUMonitoringFPCIndex }} SPU {{ $jnxJsSPUMonitoringSPUIndex }} CP Flow Count'
|
|
index: 'jnxJsSPUMonitoringCurrentCPSession.{{ $index }}'
|
|
skip_values:
|
|
- 0
|
|
state:
|
|
data:
|
|
-
|
|
oid: jnxYellowAlarmState
|
|
value: jnxYellowAlarmState
|
|
num_oid: '.1.3.6.1.4.1.2636.3.4.2.2.1.{{ $index }}'
|
|
descr: 'Yellow Alarm'
|
|
index: '{{ $index }}'
|
|
states:
|
|
- { value: 1, descr: unknown, graph: 1, generic: 3 }
|
|
- { value: 2, descr: off, graph: 1, generic: 0 }
|
|
- { value: 3, descr: on, graph: 1, generic: 2 }
|
|
-
|
|
oid: jnxRedAlarmState
|
|
value: jnxRedAlarmState
|
|
num_oid: '.1.3.6.1.4.1.2636.3.4.2.3.1.{{ $index }}'
|
|
descr: 'Red Alarm'
|
|
index: '{{ $index }}'
|
|
states:
|
|
- { value: 1, descr: unknown, graph: 1, generic: 3 }
|
|
- { value: 2, descr: off, graph: 1, generic: 0 }
|
|
- { value: 3, descr: on, graph: 1, generic: 2 }
|
|
-
|
|
oid: jnxFruTable
|
|
value: jnxFruState
|
|
num_oid: '.1.3.6.1.4.1.2636.3.1.15.1.8.{{ $index }}'
|
|
descr: jnxFruName
|
|
index: 'jnxFruName.{{ $index }}'
|
|
skip_value_lt: 3
|
|
states:
|
|
- { value: 1, descr: unknown, graph: 1, generic: 3 }
|
|
- { value: 2, descr: empty, graph: 1, generic: 3 }
|
|
- { value: 3, descr: present, graph: 1, generic: 1 }
|
|
- { value: 4, descr: ready, graph: 1, generic: 0 }
|
|
- { value: 5, descr: announceOnline, graph: 1, generic: 0 }
|
|
- { value: 6, descr: online, graph: 1, generic: 0 }
|
|
- { value: 7, descr: anounceOffline, graph: 1, generic: 1 }
|
|
- { value: 8, descr: offline, graph: 1, generic: 2 }
|
|
- { value: 9, descr: diagnostic, graph: 1, generic: 3 }
|
|
- { value: 10, descr: standby, graph: 1, generic: 3 }
|
|
-
|
|
oid: jnxVirtualChassisMemberTable
|
|
value: jnxVirtualChassisMemberRole
|
|
num_oid: '.1.3.6.1.4.1.2636.3.40.1.4.1.1.1.3.{{ $index }}'
|
|
descr: jnxVirtualChassisMemberSerialnumber
|
|
group: Virtual Chassis Members
|
|
index: 'jnxVirtualChassisMemberSerialnumber.{{ $index }}'
|
|
states:
|
|
- { value: 1, generic: 0, graph: 0, descr: master }
|
|
- { value: 2, generic: 0, graph: 0, descr: backup }
|
|
- { value: 3, generic: 0, graph: 0, descr: linecard }
|
|
-
|
|
oid: POWER-ETHERNET-MIB::pethMainPseTable
|
|
value: POWER-ETHERNET-MIB::pethMainPseOperStatus
|
|
num_oid: '.1.3.6.1.2.1.105.1.3.1.1.3.{{ $index }}'
|
|
descr: 'PoE Controller {{ $index }} Status'
|
|
index: 'pethMainPseOperStatus.{{ $index }}'
|
|
states:
|
|
- { value: 1, generic: 0, graph: 0, descr: on }
|
|
- { value: 2, generic: 0, graph: 0, descr: off }
|
|
- { value: 3, generic: 2, graph: 0, descr: fault }
|
|
power:
|
|
data:
|
|
-
|
|
oid: POWER-ETHERNET-MIB::pethMainPseTable
|
|
value: POWER-ETHERNET-MIB::pethMainPseConsumptionPower
|
|
num_oid: '.1.3.6.1.2.1.105.1.3.1.1.4.{{ $index }}'
|
|
descr: 'PoE Controller {{ $index }} Load'
|
|
index: 'pethMainPseConsumptionPower.{{ $index }}'
|
|
high_limit: POWER-ETHERNET-MIB::pethMainPsePower
|
|
low_limit: -1
|
|
low_warn_limit: -1
|