mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
librenms-librenms/mibs/aos/AaIETF_HUBMIB_POWER_ETHERNET_DRAFT.mib
Adam Amstrong 8fa88ade9f add many mibs 
git-svn-id: http://www.observium.org/svn/observer/trunk@2167 61d68cd4-352d-0410-923a-c4978735b2b8
2011-04-26 15:07:25 +00:00

707 lines
26 KiB
Plaintext
Raw Blame History

POWER-ETHERNET-MIB DEFINITIONS ::= BEGIN
IMPORTS
-- **********************************************************
-- > > > Use Alcatel Branch Until IANA Assigns Number < < <
-- **********************************************************
softentIND1InLinePower FROM ALCATEL-IND1-BASE
-- **********************************************************
-- > > > Use Alcatel Branch Until IANA Assigns Number < < <
-- **********************************************************
-- MODULE-IDENTITY, mib-2, OBJECT-TYPE, Integer32,
MODULE-IDENTITY, OBJECT-TYPE, Integer32,
Gauge32, Counter32, NOTIFICATION-TYPE
FROM SNMPv2-SMI
TruthValue
FROM SNMPv2-TC
InterfaceIndex
FROM IF-MIB
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF;
powerEthernetMIB MODULE-IDENTITY
LAST-UPDATED "200212020000Z" -- December 02, 2002
ORGANIZATION "IETF Ethernet Interfaces and Hub MIB
Working Group"
CONTACT-INFO
"
Chair: Dan Romascanu
Avaya Inc.
Tel: +972-3-645-8414
Email: dromasca@avaya.com
Editor: Avi Berger
PowerDsine Inc.
Tel: 972-9-7755100 Ext 307
Fax: 972-9-7755120
E-mail: avib@PowerDsine.com
"
DESCRIPTION
"The MIB module for for managing Powered Devices (PD) or
Power Source Equipment (PSE) working according to the IEEE
802.af Powered Ethernet (DTE Power via MDI) standard.
The following terms are used throughout this
MIB module. For complete formal definitions,
the IEEE 802.3 standards should be consulted
wherever possible:
Group - A recommended, but optional, entity
defined by the IEEE 802.3 management standard,
in order to support a modular numbering scheme.
The classical example allows an implementor to
represent field-replaceable units as groups of
ports, with the port numbering matching the
modular hardware implementation.
Port - This entity identifies the port within the group
for which this entry contains information. The numbering
scheme for ports is implementation specific."
REVISION "200212020000Z" -- December 02, 2002
DESCRIPTION "Initial version, published as RFC yyyy."
-- ::= { mib-2 xx }
-- NOTE TO RFC EDITOR: When this document is published as an
-- RFC, replace xx with IANA assignment, and delete this comment.
-- **********************************************************
-- > > > Use Alcatel Branch Until IANA Assigns Number < < <
-- **********************************************************
::= { softentIND1InLinePower 999 }
-- **********************************************************
-- > > > Use Alcatel Branch Until IANA Assigns Number < < <
-- **********************************************************
pethNotifications OBJECT IDENTIFIER ::= { powerEthernetMIB 0 }
pethObjects OBJECT IDENTIFIER ::= { powerEthernetMIB 1 }
pethConformance OBJECT IDENTIFIER ::= { powerEthernetMIB 2 }
-- PSE Objects
pethPsePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PethPsePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects that display and control the power
characteristics power Ethernet ports on a Power Source
Entity (PSE) device. This group will be implemented in
managed power Ethernet switches and mid-span devices."
::= { pethObjects 1 }
pethPsePortEntry OBJECT-TYPE
SYNTAX PethPsePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that display and control the power
characteristics of a power Ethernet PSE port."
INDEX { pethPsePortGroupIndex , pethPsePortIndex }
::= { pethPsePortTable 1 }
PethPsePortEntry ::= SEQUENCE {
pethPsePortGroupIndex
Integer32,
pethPsePortIndex
Integer32,
pethPsePortAdminEnable
INTEGER,
pethPsePortPowerPairsControlAbility
TruthValue,
pethPsePortPowerPairs
INTEGER,
pethPsePortPowerDetectionControl
INTEGER,
pethPsePortDetectionStatus
INTEGER,
pethPsePortPowerPriority
INTEGER,
pethPsePortPowerMaintenanceStatus
INTEGER,
pethPsePortMPSAbsentCounter
Counter32,
pethPsePortOverCurrentCounter
Counter32,
pethPsePortType
INTEGER,
pethPsePortPowerClassifications
INTEGER
}
pethPsePortGroupIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This variable uniquely identifies the group
containing the port to which a power Ethernet PSE is connected.
Group means box in the stack, module in a rack and the value 1
MUST be used for non-modular devices .
pethPseMidSpanGroupCapacity is the number of Mid-Span PSE
groups that can be contained within the Mid-Span PSE."
::= { pethPsePortEntry 1 }
pethPsePortIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This variable uniquely identifies the power Ethernet PSE
port within group pethPseGroupIndex to which the
power Ethernet PSE entry is connected."
::= { pethPsePortEntry 2 }
pethPsePortAdminEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables power supply on this port.
Setting this object at a value enable(1) enables power
and detection mechanism for this port.
Setting this object at a value disable(2) disables power
for this port."
::= { pethPsePortEntry 3 }
pethPsePortPowerPairsControlAbility OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the capability of controlling the power pairs
functionality to switch pins for sourcing power.
The value true indicate that the device has the capability
to control the power pairs"
::= { pethPsePortEntry 4 }
pethPsePortPowerPairs OBJECT-TYPE
SYNTAX INTEGER {
signal(1),
spare(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Describes or controls the pairs in use. If the value of
pethPsePortPowerPairsControl is true, this object is
writable.
A value of signal(1) means that the signal pairs
only are in use.
A value of spare(2) means that the spare pairs
only are in use."
::= { pethPsePortEntry 5 }
pethPsePortPowerDetectionControl OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
test(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the power detection mechanism of the port.
Setting the value auto(1) enables the power detection
mechanism of the port.
Setting the value test(2) puts the port in a
testmode: force continuous discovery without applying
power regardless of whether PD detected."
::= { pethPsePortEntry 6 }
pethPsePortDetectionStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
searching(2),
deliveringPower(4),
fault(5),
test(7),
denyLowPriority(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the operational status of the port PD detection.
A value of disabled(1)- indicates that the PSE State diagram is in
the state IDLE
A value of searching(2)- indicates that the PSE State diagram is in
the state DETECTION, CLASSIFICATION, SIGNATURE_INVALID or BACKOFF.
A value of deliveringPower(4) - indicates that the PSE State diagram
is in the state POWER_UP, POWER_ON or POWER_OFF.
A value of fault(5) - indicates that the PSE State diagram is in the
state TEST_ERROR or the state IDLE due to the variable error
condition.
Faults detected are vendor specific.
A value of test(7) - indicates that the PSE State diagram is in the
state TEST_MODE.
A value of denyLowPriority(8) indicates that the port was
disabled by the power management system, in order to keep
active higher priority ports.
"
::= { pethPsePortEntry 7 }
pethPsePortPowerPriority OBJECT-TYPE
SYNTAX INTEGER {
critical(1),
high(2),
low(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the priority of the port from the point
of view of a power management algorithm. The priority that
is set by this variable could be used by a control mechanism
that prevents over current situations by disconnecting first
ports with lower power priority. Ports that connect devices
critical to the operation of the network - like the E911
telephones ports - should be set to higher priority."
::= { pethPsePortEntry 8 }
pethPsePortPowerMaintenanceStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
underCurrent(2),
mPSAbsent(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value ok(1) indicates the Power Maintenance
Signature is present and the overcurrent condition has not been
detected.
The value overCurrent (2) indicates an overcurrent condition
has been detected.
The value mPSAbsent(3) indicates that the Power Maintenance
Signature is absent."
REFERENCE "[IEEE Draft P802.3af/D4.0, November, 2002, 30.9.1.1.8
aPSEPowerMaintenanceStatus]"
::= { pethPsePortEntry 10 }
pethPsePortMPSAbsentCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the
pethPsePortPowerMaintenanceStatus attribute changes from any
value to the value mPSAbsent(3)."
REFERENCE "[IEEE Draft P802.3af/D4.0, November, 2002, object 30.9.1.1.9
aPSEUnderCurrentCounter]"
::= { pethPsePortEntry 11 }
pethPsePortOverCurrentCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the aPSEPowerCurrentStatus
attribute changes from any value to the value overCurrent(2)."
REFERENCE "[IEEE Draft P802.3af/D4.0, November, 2002, object 30.9.1.1.1
aPSEOverCurrentCounter]"
::= { pethPsePortEntry 12 }
pethPsePortType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
telephone(2),
webcam(3),
wireless(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A manager will set the value of this variable to a value
that indicates the type of the device that is connected
to theport. This value can be the result of the mapping
the address of the station connected to the port and of
the value of the pethPdPortType of the respective PD port."
::= { pethPsePortEntry 13 }
pethPsePortPowerClassifications OBJECT-TYPE
SYNTAX INTEGER {
class0(1),
class1(2),
class2(3),
class3(4),
class4(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Classification is a way to tag different terminals on the
Power over LAN network according to their power consumption.
Devices such as IP telephones, WLAN access points and others,
will be classified according to their power requirements.
The value is only valid while a valid PD is being detected as
indicated by the attribute pethPsePortDetectionStatus reporting
the value or deliveringPower(4)."
REFERENCE "[IEEE Draft P802.3af/D4.0, November, 2002,
object 30.9.1.1.7 aPSEPowerClassification]"
::= { pethPsePortEntry 14 }
-- PD Port table
pethPdPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PethPdPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects that display and control the power
characteristics power Ethernet ports on a Powered
Device(PD) device. This group will be implemented in
managed powered and mid-span devices."
::= { pethObjects 2 }
pethPdPortEntry OBJECT-TYPE
SYNTAX PethPdPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that display and control the power
characteristics of a Powered Device port."
INDEX { pethPdPortIndex }
::= { pethPdPortTable 1 }
PethPdPortEntry ::= SEQUENCE {
pethPdPortIndex
InterfaceIndex,
pethPdPortAdminEnable
INTEGER
}
pethPdPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index value that uniquely identifies an
interface to a PD device. The
interface identified by a particular value of
this index is the same interface as identified
by the same value of ifIndex. The mapping
between the ifIndex values and the numbering of
the port on the device is an implementation
issue."
::= { pethPdPortEntry 1 }
pethPdPortAdminEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value identifies the operational state of the PD functions.
An interface which can provide the PD functions will be enabled
to do so when this attribute has the value enable. When this
attribute has the value disable the interface will act
as it would if it had no PD function."
::= { pethPdPortEntry 2 }
-- Main PSE Objects
pethMainPseObjects OBJECT IDENTIFIER ::= { pethObjects 3 }
pethMainPseTable OBJECT-TYPE
SYNTAX SEQUENCE OF PethMainPseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects that display and control the Main power
on a PSE device. Example - an Ethernet switch midspan device can
control an Ethnternet port and the Main Power supply unit's."
::= { pethMainPseObjects 1 }
pethMainPseEntry OBJECT-TYPE
SYNTAX PethMainPseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that display and control the Main power
of a PSE. "
INDEX { pethMainPseGroupIndex }
::= { pethMainPseTable 1 }
PethMainPseEntry ::= SEQUENCE {
pethMainPseGroupIndex
Integer32,
pethMainPsePower
Gauge32 ,
pethMainPseOperStatus
INTEGER,
pethMainPseConsumptionPower
Gauge32,
pethMainPseUsageThreshold
Integer32
}
pethMainPseGroupIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This variable uniquely identifies the group to which
power Ethernet PSE is connected.Group means (box in the stack,
module in a rack) and the value 1 MUST be used for non-modular
devices "
::= { pethMainPseEntry 1 }
pethMainPsePower OBJECT-TYPE
SYNTAX Gauge32 (1..65535)
UNITS "Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The nominal power of the PSE expressed in Watts."
::= { pethMainPseEntry 2 }
pethMainPseOperStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2),
faulty(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the main PSE."
::= { pethMainPseEntry 3 }
pethMainPseConsumptionPower OBJECT-TYPE
SYNTAX Gauge32
UNITS "Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Measured usage power expressed in Watts."
::= { pethMainPseEntry 4 }
pethMainPseUsageThreshold OBJECT-TYPE
SYNTAX Integer32 (1..99)
UNITS "%"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The usage threshold expressed in percents for
comparing the measured power and initiating
an alarm if the threshold is exceeded."
::= { pethMainPseEntry 7 }
-- Notification Control Objects
pethNotificationControl OBJECT IDENTIFIER ::= { pethObjects 4 }
pethNotificationControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF PethNotificationControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects that display and control the Notification
on a PSE device."
::= { pethNotificationControl 1 }
pethNotificationControlEntry OBJECT-TYPE
SYNTAX PethNotificationControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that control the Notification events."
INDEX { pethNotificationControlGroupIndex }
::= { pethNotificationControlTable 1 }
PethNotificationControlEntry ::= SEQUENCE {
pethNotificationControlGroupIndex
Integer32,
pethNotificationControlEnable
INTEGER
}
pethNotificationControlGroupIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This variable uniquely identifies the group. Group means
box in the stack, module in a rack and it is RECOMENDED
that the value 1 be used for non-modular devices "
::= { pethNotificationControlEntry 1 }
pethNotificationControlEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable Notification from Agent"
::= { pethNotificationControlEntry 2 }
--
-- Notifications Section
--
--
pethPsePortOnOffNotification NOTIFICATION-TYPE
OBJECTS { pethPsePortDetectionStatus }
STATUS current
DESCRIPTION
" This Notification indicates if Pse Port is delivering or
not power to the PD. This Notification SHOULD be sent on
every status change except in the searching mode."
::= { pethNotifications 1 }
pethPsePortPowerMaintenanceStatusNotification NOTIFICATION-TYPE
OBJECTS { pethPsePortPowerMaintenanceStatus }
STATUS current
DESCRIPTION
" This Notification indicates a Port Change Status and it
SHOULD be sent on every status change."
::= { pethNotifications 2 }
pethMainPowerUsageOnNotification NOTIFICATION-TYPE
OBJECTS { pethMainPseConsumptionPower }
STATUS current
DESCRIPTION
" This Notification indicate PSE Threshold usage indication is
on, the usage power is above the threshold."
::= { pethNotifications 4 }
pethMainPowerUsageOffNotification NOTIFICATION-TYPE
OBJECTS { pethMainPseConsumptionPower }
STATUS current
DESCRIPTION
" This Notification indicate PSE Threshold usage indication
off, the usage power is below the threshold."
::= { pethNotifications 5 }
--
-- Conformance Section
--
pethCompliances OBJECT IDENTIFIER ::= { pethConformance 1 }
pethGroups OBJECT IDENTIFIER ::= { pethConformance 2 }
pethCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for conformance to the
Power Ethernet MIB."
MODULE -- this module
GROUP pethPsePortGroup
DESCRIPTION
"The pethPsePortGroup is mandatory for systems which
implement PSE ports."
GROUP pethPdPortGroup
DESCRIPTION
"The pethPdPortGroup is mandatory for systems which
implement PD Ports."
GROUP pethMainPseGroup
DESCRIPTION
"The pethMainPseGroup is mandatory for systems which
implement main power supply within a PSE Device."
GROUP pethNotificationControlGroup
DESCRIPTION
"The pethNotificationControlGroup is mandatory for systems which
implement PSE ports."
::= { pethCompliances 1 }
pethPseCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for conformance to the PSE and MID-
Span."
MODULE -- this module
MANDATORY-GROUPS {pethPsePortGroup, pethMainPseGroup,pethNotificationControlGroup}
::= { pethCompliances 2 }
pethPdCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for conformance to the PD."
MODULE -- this module
MANDATORY-GROUPS {pethPdPortGroup}
::= { pethCompliances 3}
pethPsePortGroup OBJECT-GROUP
OBJECTS {
pethPsePortAdminEnable,
pethPsePortPowerPairsControlAbility,
pethPsePortPowerDetectionControl,
pethPsePortPowerPairs,
pethPsePortDetectionStatus,
pethPsePortPowerPriority,
pethPsePortPowerMaintenanceStatus ,
pethPsePortMPSAbsentCounter,
pethPsePortOverCurrentCounter,
pethPsePortType,
pethPsePortPowerClassifications
}
STATUS current
DESCRIPTION
"The pethPsePortGroup is mandatory for systems which
implement PSE ports."
::= { pethGroups 1 }
pethPdPortGroup OBJECT-GROUP
OBJECTS {
pethPdPortAdminEnable
}
STATUS current
DESCRIPTION
"The pethPdPortGroup is mandatory for systems which
implement PD Ports."
::= { pethGroups 2 }
pethMainPseGroup OBJECT-GROUP
OBJECTS {
pethMainPsePower,
pethMainPseOperStatus,
pethMainPseConsumptionPower,
pethMainPseUsageThreshold
}
STATUS current
DESCRIPTION
"Main PSE Objects. "
::= { pethGroups 3 }
pethNotificationControlGroup OBJECT-GROUP
OBJECTS {
pethNotificationControlEnable
}
STATUS current
DESCRIPTION
"Notification Control Objects. "
::= { pethGroups 4 }
pethPsePortNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { pethPsePortOnOffNotification,
pethPsePortPowerMaintenanceStatusNotification}
STATUS current
DESCRIPTION "Pse Notification indications"
::= { pethCompliances 4 }
pethMainPowerNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { pethMainPowerUsageOnNotification,
pethMainPowerUsageOffNotification}
STATUS current
DESCRIPTION "Pse Notification indications"
::= { pethCompliances 5 }
END
Reference in New Issue View Git Blame Copy Permalink