mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
librenms-librenms/mibs/huawei/HUAWEI-ETHARP

917 lines
37 KiB
Plaintext
Raw Blame History

-- =================================================================
-- Copyright (C) 2006 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: Huawei Ethernet ARP MIB
-- Reference: HUAWEI Enterprise MIB
-- Version: V1.0
-- History:
--
-- =================================================================
HUAWEI-ETHARP-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwDatacomm
FROM HUAWEI-MIB
OBJECT-TYPE, MODULE-IDENTITY, OBJECT-TYPE,IpAddress ,Counter32
FROM SNMPv2-SMI
PhysAddress,
DisplayString,
RowStatus
FROM SNMPv2-TC
NOTIFICATION-GROUP
FROM SNMPv2-CONF
InterfaceIndex
FROM IF-MIB
InetAddressIPv4
FROM INET-ADDRESS-MIB;
hwEthernetARPMIB MODULE-IDENTITY
LAST-UPDATED "200609050000Z" -- March 01, 2003 at 00:00 GMT
ORGANIZATION
"Huawei Technologies co., Ltd."
CONTACT-INFO
" R&D BeiJing, Huawei Technologies co.,Ltd.
Huawei Bld.,NO.3 Xinxi Rd.,
Shang-Di Information Industry Base,
Hai-Dian District Beijing P.R. China
Zip:100085
Http://www.huawei.com
E-mail:support@huawei.com "
DESCRIPTION
"This MIB describes objects used for managing Ethernet ARP,
including ARP Speed-limit,ARP Limit etc. "
REVISION "200606100000Z" -- February 12, 2003 at 00:00 GMT
DESCRIPTION
"The initial revision of this MIB module."
::= { hwDatacomm 123 }
hwEthernetARPObjects OBJECT IDENTIFIER ::= { hwEthernetARPMIB 1 }
-- =================================================================
-- 1st The Node of Anti-AttackLog
-- =================================================================
hwEthernetARPAntiAttackLog OBJECT-TYPE
SYNTAX INTEGER(0..1200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To prevent log and trap from being attacked, the function is not enabled by default."
::= { hwEthernetARPObjects 1 }
-- =================================================================
-- 2nd The Node of LearningStrict
-- =================================================================
hwEthernetARPLearningStrict OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the ARP strict learning. In this way, routers can learn ARP entries only from
the arp reply in response to the arp requrest send by the router."
::= { hwEthernetARPObjects 2 }
-- =================================================================
-- 3rd The Table of ARP Speed Limit
-- =================================================================
hwEthernetARPSpeedLimitTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEthernetARPSpeedLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the configuration information of Ethernet ARP Speed limit slot.
The information includes type, speedvalue, sourceip and destip."
::= { hwEthernetARPObjects 3 }
hwEthernetARPSpeedLimitEntry OBJECT-TYPE
SYNTAX HwEthernetARPSpeedLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains the configuration information of Ethernet ARP Speed limit slot.
The information includes type, speedvalue, sourceip and destip."
INDEX {hwEthernetARPLimitSlot,hwEthernetARPLimitType,hwEthernetARPLimitIPType}
::= { hwEthernetARPSpeedLimitTable 1 }
HwEthernetARPSpeedLimitEntry ::=
SEQUENCE {
hwEthernetARPLimitSlot INTEGER ,
hwEthernetARPLimitType INTEGER ,
hwEthernetARPLimitIPType INTEGER ,
hwEthernetARPLimitSpeedValue Unsigned32
}
hwEthernetARPLimitSlot OBJECT-TYPE
SYNTAX INTEGER(0..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The slot of ARP Speed Limit."
::= { hwEthernetARPSpeedLimitEntry 1 }
hwEthernetARPLimitType OBJECT-TYPE
SYNTAX INTEGER{
arp(1),
arpmiss(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Type of ARP Speed Limit."
::= { hwEthernetARPSpeedLimitEntry 2 }
hwEthernetARPLimitIPType OBJECT-TYPE
SYNTAX INTEGER{
sourceip(4),
destinationip(8)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ARP speed limit is performed on a source or a destination IP address."
::= { hwEthernetARPSpeedLimitEntry 3 }
hwEthernetARPLimitSpeedValue OBJECT-TYPE
SYNTAX Unsigned32(0..32768)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Speed Value of ARP Speed Limit."
::= { hwEthernetARPSpeedLimitEntry 4 }
-- =================================================================
-- 5th The Table of ARP Speed Limit
-- =================================================================
hwEthernetARPSpeedLimitIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates an interface enabled with ARP-MISS
or an interface receiving the ARP packets."
::= { hwEthernetARPObjects 4 }
-- =================================================================
-- 5th The Table of ARP Speed Limit
-- =================================================================
hwEthernetARPSpeedLimitConfigured OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The Configured Speed Limit Value of ARP Speed Limit."
::= { hwEthernetARPObjects 5 }
-- =================================================================
-- 5th The Table of ARP Speed Limit
-- =================================================================
hwEthernetARPSpeedLimitCurrent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The Current Speed Limit Value of ARP Speed Limit."
::= { hwEthernetARPObjects 6 }
-- =================================================================
-- 5th The Table of ARP Speed Limit
-- =================================================================
hwEthernetARPSpeedLimitType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The Type of ARP Speed Limit."
::= { hwEthernetARPObjects 7 }
-- =================================================================
-- 6th The Table of ARP Speed Limit
-- =================================================================
hwEthernetARPSpeedLimitSrcIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The Source IP address of ARP Speed Limit."
::= { hwEthernetARPObjects 8 }
-- =================================================================
-- 6th The Table of ARP Speed Limit
-- =================================================================
hwEthernetARPSpeedLimitDstIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The Destination IP address of ARP Speed Limit."
::= { hwEthernetARPObjects 9 }
-- =================================================================
-- 7th The Table of ARP Speed Limit
-- =================================================================
hwEthernetARPSpeedLimitVPNinstance OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The VPN-instance name of ARP Speed Limit."
::= { hwEthernetARPObjects 10 }
--
-- ARP LIMIT DEFINATION
-- display arp statics begin
hwEthernetARPStaticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEthernetARPStaticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table contains the statistics about Ethernet ARP.
The statistics include number of received ARP packets,
number of received ARP-MISS packets, number of learned ARP packets,
number of discarded ARP packets caused by the ARP limit,
the number of discarded ARP-MISS packets caused by the limit
and the number of discarded ARP and ARP-MISS packets caused by other reasons."
::= { hwEthernetARPObjects 11 }
hwEthernetARPStaticsEntry OBJECT-TYPE
SYNTAX HwEthernetARPStaticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table contains the statistics about Ethernet ARP.
The statistics include number of received ARP packets,
number of received ARP-MISS packets, number of learned ARP packets,
number of discarded ARP packets caused by the ARP limit,
the number of discarded ARP-MISS packets caused by the limit
and the number of discarded ARP and ARP-MISS packets caused by other reasons."
INDEX {hwEthernetARPStaticsSlot}
::= { hwEthernetARPStaticsTable 1 }
HwEthernetARPStaticsEntry ::=
SEQUENCE {
hwEthernetARPStaticsSlot INTEGER ,
hwEthernetARPStaticsLearnTotal Counter32 ,
hwEthernetARPDropForLimit Counter32 ,
hwEthernetARPDropForARPSuppress Counter32 ,
hwEthernetARPDropForARPMissSuppress Counter32,
hwEthernetARPDropForOther Counter32 ,
hwEthernetARPMissDropForOther Counter32 ,
hwEthernetARPRcvNum Counter32 ,
hwEthernetARPMissRcvNum Counter32 ,
hwEthernetARPStaticsOperation INTEGER
}
hwEthernetARPStaticsSlot OBJECT-TYPE
SYNTAX INTEGER(0..128 | 65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The slot about which the ARP statistics are displayed."
::= { hwEthernetARPStaticsEntry 1 }
hwEthernetARPStaticsLearnTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of the learned ARP packets."
::= { hwEthernetARPStaticsEntry 2 }
hwEthernetARPDropForLimit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discarded packets caused by limit."
::= { hwEthernetARPStaticsEntry 3 }
hwEthernetARPDropForARPSuppress OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discarded packets caused by the ARP suppress."
::= { hwEthernetARPStaticsEntry 4 }
hwEthernetARPDropForARPMissSuppress OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discarded packets caused by the ARP-MISS suppress."
::= { hwEthernetARPStaticsEntry 5 }
hwEthernetARPDropForOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discarded ARP packets caused by other reasons."
::= { hwEthernetARPStaticsEntry 6 }
hwEthernetARPMissDropForOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discarded ARP-MISS caused by other reasons."
::= { hwEthernetARPStaticsEntry 7 }
hwEthernetARPRcvNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received ARP packets."
::= { hwEthernetARPStaticsEntry 8 }
hwEthernetARPMissRcvNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received ARP-MISS."
::= { hwEthernetARPStaticsEntry 9 }
hwEthernetARPStaticsOperation OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
unused(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"resets the statistics about Ethernet ARP."
::= { hwEthernetARPStaticsEntry 10 }
-- display arp statics end
-- disp arp and statics with interface and vlanid begin
hwEthARPShowWithInterAndVidTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEthARPShowWithInterAndVidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Display the ARP table based on interface number or interface number and VLAN ID."
::= { hwEthernetARPObjects 12 }
hwEthARPShowWithInterAndVidEntry OBJECT-TYPE
SYNTAX HwEthARPShowWithInterAndVidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Display the ARP table based on interface number or interface number and VLAN ID."
INDEX {hwEthARPShowIfindex,hwEthARPShowVid,hwEthARPIpAddr}
::= { hwEthARPShowWithInterAndVidTable 1 }
HwEthARPShowWithInterAndVidEntry ::=
SEQUENCE {
hwEthARPShowIfindex InterfaceIndex ,
hwEthARPShowVid INTEGER ,
hwEthARPIpAddr IpAddress ,
hwEthARPMacAddr PhysAddress
}
hwEthARPShowIfindex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface learns ARP packets."
::= { hwEthARPShowWithInterAndVidEntry 1 }
hwEthARPShowVid OBJECT-TYPE
SYNTAX INTEGER(0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN receives the APR packets."
::= { hwEthARPShowWithInterAndVidEntry 2 }
hwEthARPIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ip of ARP ."
::= { hwEthARPShowWithInterAndVidEntry 3 }
hwEthARPMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC of ARP ."
::= { hwEthARPShowWithInterAndVidEntry 4 }
-- disp arp and statics with interface and vlanid end
--- arp limit config definition begin
hwEthARPLimitTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEthARPLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the ARP limit based on interfaces or VLANs."
::= { hwEthernetARPObjects 13 }
hwEthARPLimitEntry OBJECT-TYPE
SYNTAX HwEthARPLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the ARP limit based on interfaces or VLANs."
INDEX {hwEthARPLimitCfgIfindex,hwEthARPVLANFirst,hwEthARPVLANLast}
::= { hwEthARPLimitTable 1 }
HwEthARPLimitEntry ::=
SEQUENCE {
hwEthARPLimitCfgIfindex InterfaceIndex ,
hwEthARPVLANFirst INTEGER ,
hwEthARPVLANLast INTEGER ,
hwEthARPLimitNum INTEGER ,
hwEthARPLimitRowStatus RowStatus
}
hwEthARPLimitCfgIfindex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface on which the limit is configured."
::= { hwEthARPLimitEntry 1 }
hwEthARPVLANFirst OBJECT-TYPE
SYNTAX INTEGER(0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN to which Layer 2 interfaces belong."
::= { hwEthARPLimitEntry 2 }
hwEthARPVLANLast OBJECT-TYPE
SYNTAX INTEGER(0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN to which Layer 2 interfaces belong."
::= { hwEthARPLimitEntry 3 }
hwEthARPLimitNum OBJECT-TYPE
SYNTAX INTEGER(1..32768)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the ARP limit."
::= { hwEthARPLimitEntry 4 }
hwEthARPLimitRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The running status of the ARP limit table."
::= { hwEthARPLimitEntry 5 }
hwEthernetARPLearningStrictInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwEthernetARPLearningStrictInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the ARP Learning Strict based on interfaces."
::= { hwEthernetARPObjects 14 }
hwEthernetARPLearningStrictInterfaceEntry OBJECT-TYPE
SYNTAX HwEthernetARPLearningStrictInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure the ARP Learning Strict based on interfaces."
INDEX {hwEthernetARPLearningStrictIfindex}
::= { hwEthernetARPLearningStrictInterfaceTable 1 }
HwEthernetARPLearningStrictInterfaceEntry ::=
SEQUENCE {
hwEthernetARPLearningStrictIfindex InterfaceIndex ,
hwEthernetARPLearningStrictState INTEGER ,
hwEthernetARPLearningStrictRowStatus RowStatus
}
hwEthernetARPLearningStrictIfindex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface on which the ARP Learning Strict be configured."
::= { hwEthernetARPLearningStrictInterfaceEntry 1 }
hwEthernetARPLearningStrictState OBJECT-TYPE
SYNTAX INTEGER
{
forceEnable(1),
forceDisable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ARP Learning Strict State be configured."
::= { hwEthernetARPLearningStrictInterfaceEntry 2 }
hwEthernetARPLearningStrictRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The running status of the ARP Learning Strict table."
::= { hwEthernetARPLearningStrictInterfaceEntry 3 }
--
--- arp process-interface-status begin
hwArpLinkInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwArpLinkInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Config ARP link interface:
hwArpLinkIfIndex: interface index
hwArpLinkPeerIp: peer ip
hwArpLinkDetectTime: detection time between two ARP packects
hwArpLinkDetectTimes: detection times of ARP packects
hwArpLinkDetectMode: detection mode
hwArpLinkStatus: interface status
hwArpLinkRowStatus: the row status of this row."
::= { hwEthernetARPObjects 15 }
hwArpLinkInterfaceEntry OBJECT-TYPE
SYNTAX HwArpLinkInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Config ARP link interface:
hwArpLinkIfIndex: interface index
hwArpLinkPeerIp: peer ip
hwArpLinkDetectTime: detection time between two ARP packects
hwArpLinkDetectTimes: detection times of ARP packects
hwArpLinkDetectMode: detection mode
hwArpLinkStatus: interface status
hwArpLinkRowStatus: the row status of this row."
INDEX { hwArpLinkIfIndex }
::= { hwArpLinkInterfaceTable 1 }
HwArpLinkInterfaceEntry ::=
SEQUENCE {
hwArpLinkIfIndex
Integer32,
hwArpLinkPeerIp
InetAddressIPv4,
hwArpLinkDetectTime
Integer32,
hwArpLinkDetectTimes
Integer32,
hwArpLinkDetectMode
INTEGER,
hwArpLinkStatus
INTEGER,
hwArpLinkRowStatus
RowStatus
}
hwArpLinkIfIndex OBJECT-TYPE
SYNTAX Integer32(1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of interface which is configed to be linked by ARP,
the zero value is invalid."
::= { hwArpLinkInterfaceEntry 1 }
hwArpLinkPeerIp OBJECT-TYPE
SYNTAX InetAddressIPv4
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IP address which ARP detecting packet will send to. When
creating a new record or modifying the peer ip address, a check for
this ip will be generated. If it is invalid, that operation will
be not applicable."
::= { hwArpLinkInterfaceEntry 11 }
hwArpLinkDetectTime OBJECT-TYPE
SYNTAX Integer32(200..10000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interval time for two ARP packets are sent to detect the
peer's interface status, this time unit is millisecond. The valid
range is from 200 to 10000, and the default value is 1000."
DEFVAL { 1000 }
::= { hwArpLinkInterfaceEntry 12 }
hwArpLinkDetectTimes OBJECT-TYPE
SYNTAX Integer32(1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"After the max detecting times for ARP packet is sent to, and there is not
any response, the sender can judge the peer interface is down. Then, setting
the status of current interface down. The valid range is from 1 to 10,
and the default value is 3."
DEFVAL { 3 }
::= { hwArpLinkInterfaceEntry 13 }
hwArpLinkDetectMode OBJECT-TYPE
SYNTAX INTEGER
{
loose(1),
strict(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The detecting mode for ARP linking interface. If the mode is loose and its
status is down, current interface just wait to receive the ARP packet, when
received peer's arp packet, current interface status is up. If mode is
strict, current interface sends ARP detecting packet to peer actively, and
shutdown itself, if these is no response from peer after the retry times.
If status of current interface is up, it will send ARP packet to detect the
status of peer actively, whenever the mode is loose or strict."
DEFVAL { strict }
::= { hwArpLinkInterfaceEntry 14 }
hwArpLinkStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of interface linked by ARP. This value can not be set anytime."
DEFVAL { down }
::= { hwArpLinkInterfaceEntry 15 }
hwArpLinkRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status of ARP link table. The detail can be found from the rowstatus definition."
::= { hwArpLinkInterfaceEntry 51}
-- =================================================================
-- The Table of ARP Entry Expire control table (use detect mode now)
-- =================================================================
hwArpEntryExpireControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwArpEntryExpireControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object identifies the parameters of ARP aging detection,
such as ARP detection mode, start time, detection times. At present,
only the ARP detection mode can be configured.
hwArpEntryExpireIfIndex: indicates the interface index.
hwArpEntryExpireDetectMode: indicates the unicast or broadcast ARP aging detection mode."
::= { hwEthernetARPObjects 16 }
hwArpEntryExpireControlEntry OBJECT-TYPE
SYNTAX HwArpEntryExpireControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object identifies the parameters of ARP aging detection,
such as ARP detection mode, start time, detection times. At present,
only the ARP detection mode can be configured.
hwArpEntryExpireIfIndex: indicates the interface index.
hwArpEntryExpireDetectMode: indicates the unicast or broadcast ARP aging detection mode."
INDEX { hwArpEntryExpireIfIndex }
::= { hwArpEntryExpireControlTable 1 }
HwArpEntryExpireControlEntry ::=
SEQUENCE {
hwArpEntryExpireIfIndex
Integer32,
hwArpEntryExpireDetectMode
INTEGER
}
hwArpEntryExpireIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the index of an interface on which ARP aging detection
parameters are set. The value 0 is invalid."
::= { hwArpEntryExpireControlEntry 1 }
hwArpEntryExpireDetectMode OBJECT-TYPE
SYNTAX INTEGER
{
broadcast(1),
unicast(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the ARP aging detection mode. In unicast ARP detection mode,
unicast ARP detection packets are sent before ARP ages. In broadcast ARP detection mode,
broadcast ARP detection packets are sent before ARP ages. By default,
the system adopts the broadcast ARP detection mode."
DEFVAL { broadcast }
::= { hwArpEntryExpireControlEntry 2 }
-- End of hwArpEntryExpireControlTable
-- Notifications(trap) Definitions
--
hwEthernetARPNotifications OBJECT IDENTIFIER ::= { hwEthernetARPMIB 2 }
hwEthernetARPSpeedLimitAlarm NOTIFICATION-TYPE
OBJECTS { hwEthernetARPSpeedLimitIfIndex,hwEthernetARPSpeedLimitConfigured,hwEthernetARPSpeedLimitCurrent,hwEthernetARPSpeedLimitType,hwEthernetARPSpeedLimitSrcIPAddr,hwEthernetARPSpeedLimitDstIPAddr,hwEthernetARPSpeedLimitVPNinstance}
STATUS current
DESCRIPTION
"Trap information about ARP speed limit: interface index, current configured limit number, current received number, limit type (ARP, ARP-MISS), source IP address, destination IP address, VPN instance."
::= { hwEthernetARPNotifications 1 }
--
-- Conformance information
--
hwEthernetARPConformance OBJECT IDENTIFIER ::= { hwEthernetARPMIB 3 }
hwEthernetARPGroups OBJECT IDENTIFIER ::= { hwEthernetARPConformance 1 }
hwEthernetARPCompliances OBJECT IDENTIFIER ::= { hwEthernetARPConformance 2 }
hwEthernetARPStaticsGroup OBJECT-GROUP
OBJECTS {
--hwEthernetARPStaticsSlot ,
hwEthernetARPStaticsLearnTotal ,
hwEthernetARPDropForLimit ,
hwEthernetARPDropForARPSuppress ,
hwEthernetARPDropForARPMissSuppress ,
hwEthernetARPDropForOther ,
hwEthernetARPMissDropForOther ,
hwEthernetARPRcvNum ,
hwEthernetARPMissRcvNum,
hwEthernetARPStaticsOperation
}
STATUS current
DESCRIPTION
"A table contains the statistics about Ethernet ARP.
The statistics include number of received ARP packets,
number of received ARP-MISS packets, number of learned ARP packets,
number of discarded ARP packets caused by the ARP limit,
the number of discarded ARP-MISS packets caused by the limit
and the number of discarded ARP and ARP-MISS packets caused by other reasons."
::= { hwEthernetARPGroups 1 }
hwEthernetARPSpeedLimitGroup OBJECT-GROUP
OBJECTS {
hwEthernetARPLimitSpeedValue
}
STATUS current
DESCRIPTION
"A Group table ,which contains the configuration information of Ethernet ARP Speed limit slot.
The information includes type, speedvalue, sourceip and destip."
::= { hwEthernetARPGroups 2 }
hwEthARPShowWithInterAndVidGroup OBJECT-GROUP
OBJECTS {
hwEthARPMacAddr
}
STATUS current
DESCRIPTION
"Display the ARP table based on interface number or interface number and VLAN ID."
::= { hwEthernetARPGroups 3 }
hwEthARPLimitGroup OBJECT-GROUP
OBJECTS {
hwEthARPLimitNum,
hwEthARPLimitRowStatus
--hwEthARPLimitVidFirst ,
--hwEthARPLimitVidLast
}
STATUS current
DESCRIPTION
"config the arp limit on the interface with vlanid,limit num."
::= { hwEthernetARPGroups 4 }
--hwEthARPLimitGroup OBJECT-GROUP
-- OBJECTS {
--hwEthARPLimitShowNum ,
--hwEthARPLimitShowVid ,
-- hwEthARPLimitShowIfindex
-- }
--STATUS current
-- DESCRIPTION
-- "Display the limit based on interface number and VLAN ID."
--::= { hwEthernetARPGroups 5 }
hwEthernetARPBaseGroup OBJECT-GROUP
OBJECTS {
hwEthernetARPAntiAttackLog,
hwEthernetARPLearningStrict,
hwEthernetARPSpeedLimitIfIndex,
hwEthernetARPSpeedLimitConfigured,
hwEthernetARPSpeedLimitCurrent,
hwEthernetARPSpeedLimitType,
hwEthernetARPSpeedLimitSrcIPAddr,
hwEthernetARPSpeedLimitDstIPAddr,
hwEthernetARPSpeedLimitVPNinstance
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration or display."
::= { hwEthernetARPGroups 5 }
hwEthernetARPNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS{ hwEthernetARPSpeedLimitAlarm }
STATUS current
DESCRIPTION
"notification Group."
::= { hwEthernetARPGroups 6 }
hwEthernetARPLearningStrictInterfaceGroup OBJECT-GROUP
OBJECTS{
hwEthernetARPLearningStrictState,
hwEthernetARPLearningStrictRowStatus
}
STATUS current
DESCRIPTION
"ARP Learning Strict Interface Group."
::= { hwEthernetARPGroups 7 }
hwArpLinkInferaceGroup OBJECT-GROUP
OBJECTS {
hwArpLinkPeerIp,
hwArpLinkDetectTime,
hwArpLinkDetectTimes,
hwArpLinkDetectMode,
hwArpLinkStatus,
hwArpLinkRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration of ARP linking interface."
::= { hwEthernetARPGroups 8 }
hwArpEntryExpireControlGroup OBJECT-GROUP
OBJECTS {
hwArpEntryExpireDetectMode
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration of ARP Expire Parameter."
::= { hwEthernetARPGroups 9 }
hwEthernetARPCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for arp Speedlimit and arp limit."
MODULE
MANDATORY-GROUPS {
hwEthernetARPBaseGroup,
hwEthernetARPLearningStrictInterfaceGroup,
hwArpEntryExpireControlGroup
}
::= { hwEthernetARPCompliances 1 }
-- -------------------------------------------------------------
-- units of conformance
-- -------------------------------------------------------------
-- -------------------------------------------------------------
-- units of conformance
-- -------------------------------------------------------------
END
Reference in New Issue View Git Blame Copy Permalink