mirror of
https://github.com/librenms/librenms.git
synced 2024-10-07 16:52:45 +00:00
e644b9d2dd
git-svn-id: http://www.observium.org/svn/observer/trunk@764 61d68cd4-352d-0410-923a-c4978735b2b8
2032 lines
75 KiB
Plaintext
2032 lines
75 KiB
Plaintext
|
|
-- *****************************************************************************
|
|
-- Juniper-ERX-System-MIB
|
|
--
|
|
-- Juniper Networks Enterprise MIB
|
|
-- ERX System MIB
|
|
--
|
|
-- Copyright (c) 1999 Redstone Communications, Inc.
|
|
-- Copyright (c) 1999, 2002 Unisphere Networks, Inc.
|
|
-- Copyright (c) 2002, 2003 Juniper Networks, Inc.
|
|
-- All Rights Reserved.
|
|
-- *****************************************************************************
|
|
|
|
Juniper-ERX-System-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32,
|
|
TimeTicks
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, DisplayString, TruthValue, DateAndTime
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
InterfaceIndexOrZero
|
|
FROM IF-MIB
|
|
juniMibs
|
|
FROM Juniper-MIBs
|
|
JuniEnable
|
|
FROM Juniper-TC;
|
|
|
|
juniERXSysMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200311242101Z" -- 24-Nov-03 04:01 PM EST
|
|
ORGANIZATION "Juniper Networks, Inc."
|
|
CONTACT-INFO
|
|
" Juniper Networks, Inc.
|
|
Postal: 10 Technology Park Drive
|
|
Westford, MA 01886-3146
|
|
USA
|
|
Tel: +1 978 589 5800
|
|
Email: mib@Juniper.net"
|
|
DESCRIPTION
|
|
"Deprecated MIB objects for managing ERX Edge Router system elements.
|
|
See the generic E-series system MIB (Juniper-System-MIB) for the
|
|
preferred definitions. If both MIBs are supported, using the
|
|
corresponding varbinds from both MIBs to set the same object in a single
|
|
PDU is not supported."
|
|
-- Revision History
|
|
REVISION "200311242101Z" -- 24-Nov-03 04:01 PM EST - JUNOSe 5.3
|
|
DESCRIPTION
|
|
"Added Hybrid Line Modules and Hybrid IOA modules.
|
|
Added GE2 Line Module and GE2 IOA module. "
|
|
REVISION "200311241426Z" -- 24-Nov-03 09:26 AM EST - JUNOSe 5.0
|
|
DESCRIPTION
|
|
"Replaced Unisphere names with Juniper names."
|
|
REVISION "200311182206Z" -- 18-Nov-03 05:06 PM EST - JUNOSe 4.1
|
|
DESCRIPTION
|
|
"Deprecated this MIB in favor of the generic E-series system MIB,
|
|
Juniper-System-MIB.
|
|
Added a general trap control object.
|
|
Added new line card types: vts, oc48, ut3Atm4."
|
|
REVISION "200210141740Z" -- 14-Oct-02 01:40 PM EDT - JUNOSe 4.0
|
|
DESCRIPTION
|
|
"Added new line card types: X.21/V.35, Ut3f12, Ue3f12, Cocx-F3."
|
|
REVISION "200204122057Z" -- 12-Apr-02 04:57 PM EDT - JUNOSe 3.3
|
|
DESCRIPTION
|
|
"Modified the following objects:
|
|
juniERXSysTempFanStatus
|
|
juniERXSysTempStatus
|
|
Added the following objects:
|
|
juniERXSysTempProtectionStatus
|
|
juniERXSysTempProtectionHoldOffTime
|
|
juniERXSysTempProtectionHoldOffTimeRemaining
|
|
Added the following notification:
|
|
juniERXSysTempProtectionStatusChange "
|
|
REVISION "200105211927Z" -- 21-May-01 03:27 PM EDT - JUNOSe 3.2
|
|
DESCRIPTION
|
|
"Added the following objects:
|
|
juniERXSysMemUtilPct
|
|
juniERXSysMemCapacity
|
|
juniERXSysHighMemUtilThreshold
|
|
juniERXSysAbatedMemUtilThreshold
|
|
juniERXSysMemUtilTrapEnable
|
|
Added the following notifications:
|
|
juniERXSysHighMemUtil
|
|
juniERXSysAbatedMemUtil "
|
|
REVISION "200105151827Z" -- 15-May-01 02:27 PM EDT - JUNOSe 3.0
|
|
DESCRIPTION
|
|
"Added support for system timing parameters.
|
|
Added juniERXSysSlotDescr to juniERXSysSlotOperStatusChange trap."
|
|
REVISION "200004251844Z" -- 25-Apr-00 2:44 PM EDT - JUNOSe 2.0
|
|
DESCRIPTION
|
|
"Added board serial number, assembly number and assembly revision."
|
|
REVISION "200001200000Z" -- 20-Jan-00 - JUNOSe 1.3
|
|
DESCRIPTION
|
|
"Added OC-12 card and Dual FE card support.
|
|
Added redundancy/reversion and boot record configuration support."
|
|
REVISION "9902100000Z" -- 10-Feb-99 - JUNOSe 1.0
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { juniMibs 17 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Textual conventions
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
JuniTimingSelector ::= TEXTUAL-CONVENTION
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The system timing selector.
|
|
A value of 1 corresponds to the primary timing selector.
|
|
A value of 2 corresponds to the secondary timing selector.
|
|
A value of 3 corresponds to the tertiary timing selector.
|
|
A value of 4 indicates an error with the timing selector."
|
|
SYNTAX Integer32 (1..4)
|
|
|
|
JuniTimingSourceType ::= TEXTUAL-CONVENTION
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The set of selectable timing source types. The timing source type
|
|
determines the timing source parameters."
|
|
SYNTAX INTEGER {
|
|
timingInterfaceIfIndex(1),
|
|
timingInternal(2),
|
|
timingLine(3) }
|
|
|
|
JuniTimingSourceLineType ::= TEXTUAL-CONVENTION
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The set of choices for line type timing."
|
|
SYNTAX INTEGER {
|
|
timingSourceLineUndefined(0),
|
|
timingSourceLineE1PortA(1), -- e1:a
|
|
-- External SC E1 line input, port A
|
|
timingSourceLineE1PortB(2), -- e1:b
|
|
-- External SC E1 line input, port B
|
|
timingSourceLineT1PortA(3), -- t1:a
|
|
-- External SC T1 line input, port A
|
|
timingSourceLineT1PortB(4) } -- t1:b
|
|
-- External SC T1 line input, port B
|
|
|
|
JuniSysCardType ::= TEXTUAL-CONVENTION
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The type of card in a system slot:
|
|
unknown Unknown type.
|
|
srp Switch/Route Processor.
|
|
ct3 Channelized T3.
|
|
oc3 OC-3 (SONET/SDH).
|
|
ut3Atm Unchannelized T3 (ATM service).
|
|
ut3Frame Unchannelized T3 (Frame service).
|
|
ue3Atm Unchannelized E3 (ATM service).
|
|
ue3Frame Uncahnnelized E3 (Frame service).
|
|
ce1 Channelized E1.
|
|
ct1 Channelized T1.
|
|
dpfe Dual Port Fast Ethernet.
|
|
oc12Pos OC-12 (POS/SDH).
|
|
oc12Atm OC-12 (ATM service).
|
|
oc3Pos Quad OC-3 (POS/SDH).
|
|
oc3Atm Quad OC-3 (ATM service).
|
|
ge Gigabit Ethernet.
|
|
fe8 Fast Ethernet 8-port.
|
|
oc3oc12Pos Generic OC3/OC12 POS (multi-personality).
|
|
oc3oc12Atm Generic OC3/OC12 ATM (multi-personality).
|
|
coc3oc12 Channelized generic OC3/OC12 (multi-personality).
|
|
coc3 Channelized OC3.
|
|
coc12 Channelized OC12.
|
|
oc12Server OC-12 Rate Server Card.
|
|
hssi High Speed Serial Interface.
|
|
geFe Generic GE/FE (multi-personality).
|
|
ct3P12 Channelized T3 12-port.
|
|
v35 X.21/V.35 Card.
|
|
ut3f12 Unchannelized T3 12-port.
|
|
ue3f12 Unchannelized E3 12-port.
|
|
coc3F3 OC-3 channelized to T3.
|
|
coc12F3 OC-12 channelized to T3.
|
|
cocxF3 12-port T3/E3 or OC3/OC12 (multi-personality).
|
|
vts Virtual Tunnel Server.
|
|
oc48 OC-48 (SONET/SDH).
|
|
ut3Atm4 4-port Unchannelized T3 ATM.
|
|
hybrid Generic ATM/POS/GE Hybrid (multi-personality).
|
|
oc3AtmGe OC3 ATM 2-port Gigabit Ethernet 1-port.
|
|
oc3AtmPos OC3 ATM 2-port OC3 POS 2-port.
|
|
ge2 Gigabit Ethernet 2-port."
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
srp(1),
|
|
ct3(2),
|
|
oc3(3),
|
|
ut3Atm(4),
|
|
ut3Frame(5),
|
|
ue3Atm(6),
|
|
ue3Frame(7),
|
|
ce1(8),
|
|
ct1(9),
|
|
dpfe(10),
|
|
oc12Pos(11),
|
|
oc12Atm(12),
|
|
oc3Pos(13),
|
|
oc3Atm(14),
|
|
ge(15),
|
|
fe8(16),
|
|
oc3oc12Pos(17),
|
|
oc3oc12Atm(18),
|
|
coc3oc12(19),
|
|
coc3(20),
|
|
coc12(21),
|
|
oc12Server(22),
|
|
hssi(23),
|
|
geFe(24),
|
|
ct3P12(25),
|
|
v35(26),
|
|
ut3f12(27),
|
|
ue3f12(28),
|
|
coc12F3(29),
|
|
coc3F3(30),
|
|
cocxF3(31),
|
|
vts(32),
|
|
oc48(33),
|
|
ut3Atm4(34),
|
|
hybrid(35),
|
|
oc3AtmGe(36),
|
|
oc3AtmPos(37),
|
|
ge2(38) }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- MIB Structure
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniERXSysTrap OBJECT IDENTIFIER ::= { juniERXSysMIB 0 }
|
|
juniERXSysObjects OBJECT IDENTIFIER ::= { juniERXSysMIB 1 }
|
|
juniERXSysConformance OBJECT IDENTIFIER ::= { juniERXSysMIB 2 }
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Managed objects
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
--
|
|
-- Object Groups
|
|
--
|
|
juniERXSysGeneral OBJECT IDENTIFIER ::= { juniERXSysObjects 1 }
|
|
juniERXSysFabric OBJECT IDENTIFIER ::= { juniERXSysObjects 2 }
|
|
juniERXSysNvs OBJECT IDENTIFIER ::= { juniERXSysObjects 3 }
|
|
juniERXSysSlot OBJECT IDENTIFIER ::= { juniERXSysObjects 4 }
|
|
juniERXSysPort OBJECT IDENTIFIER ::= { juniERXSysObjects 5 }
|
|
juniERXSysPower OBJECT IDENTIFIER ::= { juniERXSysObjects 6 }
|
|
juniERXSysTemperature OBJECT IDENTIFIER ::= { juniERXSysObjects 7 }
|
|
juniERXSysSubsystem OBJECT IDENTIFIER ::= { juniERXSysObjects 8 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
--
|
|
-- Chassis objects
|
|
--
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniERXSysChassisRev OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Chassis revision number. If unknown, the value 255 is reported."
|
|
::= { juniERXSysGeneral 1 }
|
|
|
|
juniERXSysSwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Currently executing operational software version."
|
|
::= { juniERXSysGeneral 2 }
|
|
|
|
juniERXSysSwBuildDate OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Build date of currently executing operational software version."
|
|
::= { juniERXSysGeneral 3 }
|
|
|
|
juniERXSysRevertControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(0),
|
|
immediate(1),
|
|
timeOfDay(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Global revert control:
|
|
off Disable global revert.
|
|
immediate All slots are to revert immediately (asap).
|
|
timeOfDay All slots are to revert at time specified by
|
|
juniRxSysRevertTimeOfDay. This object/value must
|
|
be set concurrently with juniERXSysRevertTimeOfDay."
|
|
::= { juniERXSysGeneral 4 }
|
|
|
|
juniERXSysRevertTimeOfDay OBJECT-TYPE
|
|
SYNTAX Integer32 (0..86399)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of seconds past midnight on any given day at which time
|
|
reverts are allowed to occur. This object must be set concurrently with
|
|
juniERXSysRevertControl."
|
|
::= { juniERXSysGeneral 5 }
|
|
|
|
juniERXSysBootConfigControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
file(0),
|
|
fileOnce(1),
|
|
factoryDefaults(2),
|
|
runningConfiguration(3) }
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"System boot configuration control:
|
|
file Revert to configuration settings specified by
|
|
juniERXSysBootConfigFile. The
|
|
juniERXSysBootConfigControl and
|
|
juniERXSysBootConfigFile must be specified
|
|
together in the same set request PDU.
|
|
fileOnce Revert to configuration settings specified by
|
|
juniERXSysBootConfigFile. Do not continue to
|
|
use file after using it once. The
|
|
juniERXSysBootConfigControl and
|
|
juniERXSysBootConfigFile must be specified
|
|
together in the same set request PDU.
|
|
factoryDefaults Revert to factory default settings.
|
|
runningConfiguration Revert to current settings."
|
|
::= { juniERXSysGeneral 6 }
|
|
|
|
juniERXSysBootBackupConfigControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
file(0),
|
|
factoryDefaults(1),
|
|
none(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"System boot backup configuration control:
|
|
file Revert to backup configuration settings
|
|
specified by juniERXSysBootBackupConfigFile.
|
|
The juniERXSysBootBackupConfigControl and
|
|
juniERXSysBootBackupConfigFile must be
|
|
specified together in the same set request
|
|
PDU.
|
|
factoryDefaults Revert to factory default settings.
|
|
none Specify no backup."
|
|
::= { juniERXSysGeneral 7 }
|
|
|
|
juniERXSysBootForceBackupControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(0),
|
|
on(1) }
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"System boot force backup control:
|
|
off Do not force revert to backup settings.
|
|
on Do force revert to backup settings."
|
|
::= { juniERXSysGeneral 8 }
|
|
|
|
juniERXSysBootAutoRevertControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
default(0),
|
|
never(1),
|
|
set(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"System boot auto revert control:
|
|
default Use default auto-revert tolerances.
|
|
never Never auto-revert to backup.
|
|
set Set auto-revert settings at specified tolerances."
|
|
::= { juniERXSysGeneral 9 }
|
|
|
|
juniERXSysBootAutoRevertCountTolerance OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The auto-revert reboot count tolerance. This object cannot be set to
|
|
zero, but may contain a zero value when the control is set to never(1)."
|
|
::= { juniERXSysGeneral 10 }
|
|
|
|
juniERXSysBootAutoRevertTimeTolerance OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4294967294)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The auto-revert reboot time tolerance. This object cannot be set to
|
|
zero, but will contain a zero value when the control is set to
|
|
never(1)."
|
|
::= { juniERXSysGeneral 11 }
|
|
|
|
juniERXSysBootReleaseFile OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The local boot release file name, with extension .rel."
|
|
DEFVAL { "" }
|
|
::= { juniERXSysGeneral 12 }
|
|
|
|
juniERXSysBootConfigFile OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The local boot configuration file name, with extension .cnf. The
|
|
juniERXSysBootConfigControl and juniERXSysBootConfigFile must be
|
|
specified together in the same set request PDU."
|
|
DEFVAL { "" }
|
|
::= { juniERXSysGeneral 13 }
|
|
|
|
juniERXSysBootBackupReleaseFile OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The local backup boot release file name, with extension .rel."
|
|
DEFVAL { "" }
|
|
::= { juniERXSysGeneral 14 }
|
|
|
|
juniERXSysBootBackupConfigFile OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The local backup boot configuration file name, with extension .cnf.
|
|
The juniERXSysBootBackupConfigControl and juniERXSysBootBackupConfigFile
|
|
must be specified together in the same set request PDU."
|
|
DEFVAL { "" }
|
|
::= { juniERXSysGeneral 15 }
|
|
|
|
juniERXSysAdminTimingSource OBJECT-TYPE
|
|
SYNTAX JuniTimingSelector
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The administrative timing source for the ERX system. The ERX
|
|
periodically monitors the status of three timing sources, primary,
|
|
secondary and tertiary. If the systems current timing source fails, the
|
|
system will automatically downgrade to the next timing source. If the
|
|
system is configured to automatically upgrade
|
|
(juniERXSysTimingDisableAutoUpgrade is set to false(2)) the system will
|
|
switch back to the higher timing source when it becomes available.
|
|
|
|
A timing source failure can be detected by comparing the operational and
|
|
admin timing sources. If they are not equal, the system has swapped
|
|
timing sources because the administratively set value is in the error
|
|
state."
|
|
::= { juniERXSysGeneral 16 }
|
|
|
|
juniERXSysOperTimingSource OBJECT-TYPE
|
|
SYNTAX JuniTimingSelector
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The operations timing source for the ERX system. The ERX periodically
|
|
monitors the status of three timing sources, primary, secondary and
|
|
tertiary. If the systems current timing source fails, the system will
|
|
automatically downgrade to the next timing source. If the system is
|
|
configured to automatically upgrade (juniERXSysTimingDisableAutoUpgrade
|
|
is set to false(2)) the system will switch back to the higher timing
|
|
source when it becomes available."
|
|
::= { juniERXSysGeneral 17 }
|
|
|
|
juniERXSysTimingDisableAutoUpgrade OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object controls the automatic timing selector upgrade. Setting
|
|
this object to true(1) will prevent automatic upgrade to the next
|
|
highest timing selector. Setting this object to false(2) will enable
|
|
the automatic upgrade of timing selectors."
|
|
DEFVAL { false }
|
|
::= { juniERXSysGeneral 18 }
|
|
|
|
juniERXSysTimingSelectorTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniERXSysTimingSelectorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Table of system timing selectors."
|
|
::= { juniERXSysGeneral 19 }
|
|
|
|
juniERXSysTimingSelectorEntry OBJECT-TYPE
|
|
SYNTAX JuniERXSysTimingSelectorEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A table entry describing a system timing selector."
|
|
INDEX { juniERXSysTimingSelectorIndex }
|
|
::= { juniERXSysTimingSelectorTable 1 }
|
|
|
|
JuniERXSysTimingSelectorEntry ::= SEQUENCE {
|
|
juniERXSysTimingSelectorIndex JuniTimingSelector,
|
|
juniERXSysTimingSourceType JuniTimingSourceType,
|
|
juniERXSysTimingSourceIfIndex InterfaceIndexOrZero,
|
|
juniERXSysTimingSourceLine JuniTimingSourceLineType,
|
|
juniERXSysTimingStatus INTEGER }
|
|
|
|
juniERXSysTimingSelectorIndex OBJECT-TYPE
|
|
SYNTAX JuniTimingSelector
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The system timing selector index associated with this entry."
|
|
::= { juniERXSysTimingSelectorEntry 1 }
|
|
|
|
juniERXSysTimingSourceType OBJECT-TYPE
|
|
SYNTAX JuniTimingSourceType
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The system timing source type for this entry. This object must be
|
|
present when setting either the juniERXSysTimingSourceIfIndex or
|
|
juniERXSysTimingSourceLine objects. Also, if the value of this object
|
|
is set to timingInternal(2), no other objects should be simultanously
|
|
set, otherwise the agent will return an error."
|
|
::= { juniERXSysTimingSelectorEntry 2 }
|
|
|
|
juniERXSysTimingSourceIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ifIndex of the interface selected as the system timing source. The
|
|
juniERXSysTimingSourceType object must be set to
|
|
timingInterfaceIfIndex(1) otherwise setting this object will fail."
|
|
::= { juniERXSysTimingSelectorEntry 3 }
|
|
|
|
juniERXSysTimingSourceLine OBJECT-TYPE
|
|
SYNTAX JuniTimingSourceLineType
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The line type timing source for this entry. The
|
|
juniRxSysTimingSourceType object must be set to timingLine(3) for the
|
|
agent to accept a set to this object."
|
|
DEFVAL { timingSourceLineUndefined }
|
|
::= { juniERXSysTimingSelectorEntry 4 }
|
|
|
|
juniERXSysTimingStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
timingStatusOk(1),
|
|
timingStatusError(2),
|
|
timingStatusUnknown(3) }
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The status associated with this system timing selector."
|
|
::= { juniERXSysTimingSelectorEntry 5 }
|
|
|
|
juniERXSysMemUtilPct OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Percentage of system memory utilization. A value of -1 indicates the
|
|
utilization is unknown."
|
|
::= { juniERXSysGeneral 20 }
|
|
|
|
juniERXSysMemCapacity OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The total memory capacity of the system. Negative values are returned
|
|
when the capacity exceeds 2147483647; interpret the negative 32-bit
|
|
integer as an unsigned 32-bit integer value."
|
|
::= { juniERXSysGeneral 21 }
|
|
|
|
juniERXSysHighMemUtilThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The value of system memory utilization, where if reached for the first
|
|
time will generate a high memory utilization event to the management
|
|
entity on this system.
|
|
|
|
The value of this object must be greated than the value of
|
|
juniERXSysAbatedMemUtilThreshold."
|
|
DEFVAL { 85 }
|
|
::= { juniERXSysGeneral 22 }
|
|
|
|
juniERXSysAbatedMemUtilThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (0..99)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The value of system memory utilization that is used to determine when
|
|
to generate an abated memory utilization event notification to the
|
|
management entity on this system.
|
|
|
|
The value of this object must be less than the value of
|
|
juniERXSysHighMemUtilThreshold.
|
|
|
|
The abated memory utilization trap is sent once if the high memory
|
|
threshold was reached, and memory utilization falls to the value of this
|
|
object."
|
|
DEFVAL { 75 }
|
|
::= { juniERXSysGeneral 23 }
|
|
|
|
juniERXSysMemUtilTrapEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Controls the sending of system memory utilization events. Setting the
|
|
value of this object to true(1) will cause system memory utilization
|
|
event notification, if they occur, to be sent to the management entity
|
|
on this system. Setting the value of this object to false(2) will
|
|
disable event notifications."
|
|
DEFVAL { false }
|
|
::= { juniERXSysGeneral 24 }
|
|
|
|
juniERXSysGeneralTrapEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Controls whether a member of the set of ERX system notifications
|
|
(traps) defined in this MIB or the counterpart notifications defined in
|
|
the generic E-series system MIB (Juniper-System-MIB) will be initiated
|
|
when the appropriate system event occures. Setting the value of this
|
|
object to true(1) will enable the event notifications from this MIB, if
|
|
they occur, to be sent to the management entity on this system, provided
|
|
no other restrictions are in effect, instead of the counterparts from
|
|
the generic system MIB. Setting the value of this object to false(2)
|
|
will disable all event notifications defined in this MIB, enabling the
|
|
ones from the generic system MIB."
|
|
DEFVAL { false }
|
|
::= { juniERXSysGeneral 25 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
--
|
|
-- Fabric objects
|
|
--
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniERXSysFabricSpeed OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "gigabits per second"
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Speed of switching fabric, in gigabits per second."
|
|
::= { juniERXSysFabric 1 }
|
|
|
|
juniERXSysFabricRev OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Fabric revision number. If unknown, the value 255 is reported."
|
|
::= { juniERXSysFabric 2 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
--
|
|
-- Nvs objects
|
|
--
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniERXSysNvsStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notPresent(0),
|
|
writeProtected(1),
|
|
volumeError(2),
|
|
nearCapacity(3),
|
|
ok(4),
|
|
nearConfigCapacity(5) }
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Status of non-volatile storage (NVS):
|
|
notPresent NVS is not installed.
|
|
writeProtected NVS is write-protected.
|
|
volumeError Status poll of NVS failed.
|
|
nearCapacity Utilization exceeds 85% of NVS capacity.
|
|
ok NVS is operational, none of the preceding
|
|
conditions apply.
|
|
nearConfigCapacity Utilization exceeds the ability to save the
|
|
running configuration."
|
|
::= { juniERXSysNvs 1 }
|
|
|
|
juniERXSysNvsCapacity OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "megabytes"
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Capacity of NVS storage in megabytes."
|
|
::= { juniERXSysNvs 2 }
|
|
|
|
juniERXSysNvsUtilPct OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Percentage of NVS storage used. A value of -1 indicates NVS
|
|
utilization is unknown."
|
|
::= { juniERXSysNvs 3 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
--
|
|
-- Slot objects
|
|
--
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniERXSysSlotCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The number of slots in the system."
|
|
::= { juniERXSysSlot 1 }
|
|
|
|
juniERXSysSlotTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniERXSysSlotEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Table of system slots."
|
|
::= { juniERXSysSlot 2 }
|
|
|
|
juniERXSysSlotEntry OBJECT-TYPE
|
|
SYNTAX JuniERXSysSlotEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A table entry describing contents of a system slot."
|
|
INDEX { juniERXSysSlotIndex }
|
|
::= { juniERXSysSlotTable 1 }
|
|
|
|
JuniERXSysSlotEntry ::= SEQUENCE {
|
|
juniERXSysSlotIndex Integer32,
|
|
juniERXSysSlotDescr DisplayString,
|
|
juniERXSysSlotCurrentCardType JuniSysCardType,
|
|
juniERXSysSlotRev Integer32,
|
|
juniERXSysSlotAdminStatus JuniEnable,
|
|
juniERXSysSlotOperStatus INTEGER,
|
|
juniERXSysSlotDisableReason INTEGER,
|
|
juniERXSysSlotExpectedCardType JuniSysCardType,
|
|
juniERXSysSlotControl INTEGER,
|
|
juniERXSysSlotCpuUtilPct Integer32,
|
|
juniERXSysSlotMemUtilPct Integer32,
|
|
juniERXSysSlotIoaPresent TruthValue,
|
|
juniERXSysSlotPortCount Integer32,
|
|
juniERXSysSlotLastChange TimeTicks,
|
|
juniERXSysSlotRedundancyLockout JuniEnable,
|
|
juniERXSysSlotRedundancyGroupId Unsigned32,
|
|
juniERXSysSlotSpareServer TruthValue,
|
|
juniERXSysSlotAssociatedSlot Integer32,
|
|
juniERXSysSlotRevertControl INTEGER,
|
|
juniERXSysSlotRedundancyRevertTime DateAndTime,
|
|
juniERXSysSlotBootReleaseFile DisplayString,
|
|
juniERXSysSlotBootBackupReleaseFile DisplayString,
|
|
juniERXSysSlotSerialNumber DisplayString,
|
|
juniERXSysSlotAssemblyPartNumber DisplayString,
|
|
juniERXSysSlotAssemblyRev DisplayString,
|
|
juniERXSysSlotIoaSerialNumber DisplayString,
|
|
juniERXSysSlotIoaAssemblyPartNumber DisplayString,
|
|
juniERXSysSlotIoaAssemblyRev DisplayString }
|
|
|
|
juniERXSysSlotIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Slot number.
|
|
|
|
NOTE: Slot numbers are zero-based."
|
|
::= { juniERXSysSlotEntry 1 }
|
|
|
|
juniERXSysSlotDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..63))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Textual description of the card."
|
|
::= { juniERXSysSlotEntry 2 }
|
|
|
|
juniERXSysSlotCurrentCardType OBJECT-TYPE
|
|
SYNTAX JuniSysCardType
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Type of card actually in the slot. This could be different from the
|
|
type reported in juniERXSysSlotExpectedCardType, in which case it may be
|
|
necessary to set juniERXSysSlotControl to 'flush' before this card can
|
|
be made operational."
|
|
::= { juniERXSysSlotEntry 3 }
|
|
|
|
juniERXSysSlotRev OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Revision number of the card. If unknown, the value 255 is reported."
|
|
::= { juniERXSysSlotEntry 4 }
|
|
|
|
juniERXSysSlotAdminStatus OBJECT-TYPE
|
|
SYNTAX JuniEnable
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Exerts administrative control to enable/disable the slot."
|
|
::= { juniERXSysSlotEntry 5 }
|
|
|
|
juniERXSysSlotOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
empty(1),
|
|
disabled(2),
|
|
failed(3),
|
|
booting(4),
|
|
initializing(5),
|
|
online(6),
|
|
standby(7),
|
|
inactive(8) }
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Status of the card."
|
|
::= { juniERXSysSlotEntry 6 }
|
|
|
|
juniERXSysSlotDisableReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(0),
|
|
unknown(1),
|
|
assessing(2),
|
|
admin(3),
|
|
cardMismatch(4),
|
|
fabricLimit(5),
|
|
imageError(6) }
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Indicates the condition causing the slot to be disabled:
|
|
none Value when card is not disabled.
|
|
unknown Unknown reason for disablement.
|
|
assessing The slot content is being assessed (transient
|
|
initialization state).
|
|
admin The slot is administratively disabled.
|
|
cardMismatch The current card type conflicts with configuration
|
|
associated with a different card type that
|
|
previously occupied the slot.
|
|
fabricLimit Card resource requirements exceed available fabric
|
|
capacity.
|
|
imageError Software image for card is missing or invalid."
|
|
::= { juniERXSysSlotEntry 7 }
|
|
|
|
juniERXSysSlotExpectedCardType OBJECT-TYPE
|
|
SYNTAX JuniSysCardType
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Type of card associated with this slot through prior presence. After
|
|
the card is removed, this association persists (and inhibits operation
|
|
of a different card type in this slot, if one is inserted) until
|
|
juniERXSysSlotControl is set to 'flush'."
|
|
::= { juniERXSysSlotEntry 8 }
|
|
|
|
juniERXSysSlotControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noOperation(0),
|
|
flush(1),
|
|
reset(2),
|
|
forceFailover(3),
|
|
noBoot(4),
|
|
noBootBackup(5) }
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Administrative control of this slot:
|
|
noOperation Setting this value has no effect.
|
|
flush Flushes configuration associated with a
|
|
card type that previously occupied this slot.
|
|
Used to explicitly confirm that the slot is
|
|
now empty, or contains a different card type.
|
|
Card must be disabled when this value is asserted.
|
|
See description for juniERXSysSlotDisableReason.
|
|
reset Resets the slot.
|
|
forceFailover Forces the slot to failover to backup.
|
|
noBoot Deconfigure primary release file for the slot.
|
|
noBootBackup Deconfigure backup release file for the slot."
|
|
::= { juniERXSysSlotEntry 9 }
|
|
|
|
juniERXSysSlotCpuUtilPct OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Percentage of CPU utilization. A value of -1 indicates the utilization
|
|
is unknown."
|
|
::= { juniERXSysSlotEntry 10 }
|
|
|
|
juniERXSysSlotMemUtilPct OBJECT-TYPE
|
|
SYNTAX Integer32 (-1..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Percentage of memory utilization. A value of -1 indicates the
|
|
utilization is unknown."
|
|
::= { juniERXSysSlotEntry 11 }
|
|
|
|
juniERXSysSlotIoaPresent OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Indicates whether the card's corresponding I/O adapter is present."
|
|
::= { juniERXSysSlotEntry 12 }
|
|
|
|
juniERXSysSlotPortCount OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Number of physical ports for the EXPECTED card type for this slot.
|
|
|
|
NOTE: In event of a card mismatch in this slot, the port count for the
|
|
CURRENT card in this slot is not recognized/reported until the
|
|
configuration for the EXPECTED card is explicitly flushed via
|
|
juniERXSysSlotControl."
|
|
::= { juniERXSysSlotEntry 13 }
|
|
|
|
juniERXSysSlotLastChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The value of sysUpTime when the value of juniERXSysSlotOperStatus
|
|
last changed."
|
|
::= { juniERXSysSlotEntry 14 }
|
|
|
|
juniERXSysSlotRedundancyLockout OBJECT-TYPE
|
|
SYNTAX JuniEnable
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Exerts administrative control to enable/disable Redundancy protection
|
|
for the slot."
|
|
::= { juniERXSysSlotEntry 15 }
|
|
|
|
juniERXSysSlotRedundancyGroupId OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Identifies the Redundancy group as derived from hardware settings."
|
|
::= { juniERXSysSlotEntry 16 }
|
|
|
|
juniERXSysSlotSpareServer OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"True only if the line card in slot is a spare redundant server."
|
|
::= { juniERXSysSlotEntry 17 }
|
|
|
|
juniERXSysSlotAssociatedSlot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"If the module is a primary card and the spare is acting on its behalf,
|
|
then the value of this object is the slot number of the associated
|
|
spare.
|
|
|
|
If the module is a primary card and is active (not spared), then the
|
|
value of this object is the cards actual slot number.
|
|
|
|
If the module is a spare card and it is active, then the value of this
|
|
object is the slot number of the primary card that is being spared for.
|
|
|
|
If the module is a spare and it is inactive, then the value of this
|
|
object is the its own slot number.
|
|
|
|
If module is not part of a redundancy group, or the slot is empty, the
|
|
value of this object is 255."
|
|
::= { juniERXSysSlotEntry 18 }
|
|
|
|
juniERXSysSlotRevertControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
off(0),
|
|
immediate(1),
|
|
timeAndDate(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Per-slot revert control:
|
|
off Disable slot revert.
|
|
immediate Slot is to revert immediately (asap).
|
|
timeAndDate Slot is to revert at time specified by
|
|
juniRxSysSlotRedundancyRevertTime."
|
|
::= { juniERXSysSlotEntry 19 }
|
|
|
|
juniERXSysSlotRedundancyRevertTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The date and time associated with the timeAndDate (delayed) revert
|
|
operation."
|
|
::= { juniERXSysSlotEntry 20 }
|
|
|
|
juniERXSysSlotBootReleaseFile OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The local boot release file name for this slot, with extension .rel."
|
|
DEFVAL { "" }
|
|
::= { juniERXSysSlotEntry 21 }
|
|
|
|
juniERXSysSlotBootBackupReleaseFile OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The local backup boot release file name for this slot, with extension
|
|
.rel."
|
|
DEFVAL { "" }
|
|
::= { juniERXSysSlotEntry 22 }
|
|
|
|
juniERXSysSlotSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..10))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The serial number of the card in this slot."
|
|
DEFVAL { "" }
|
|
::= { juniERXSysSlotEntry 23 }
|
|
|
|
juniERXSysSlotAssemblyPartNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..10))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The part number of the card in this slot."
|
|
DEFVAL { "" }
|
|
::= { juniERXSysSlotEntry 24 }
|
|
|
|
juniERXSysSlotAssemblyRev OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..3))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The revision number of the card assembly in this slot."
|
|
DEFVAL { "" }
|
|
::= { juniERXSysSlotEntry 25 }
|
|
|
|
juniERXSysSlotIoaSerialNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..10))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The serial number of the I/O adaptor on the card in this slot."
|
|
DEFVAL { "" }
|
|
::= { juniERXSysSlotEntry 26 }
|
|
|
|
juniERXSysSlotIoaAssemblyPartNumber OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..10))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The part number of the I/O adaptor on the card in this slot."
|
|
DEFVAL { "" }
|
|
::= { juniERXSysSlotEntry 27 }
|
|
|
|
juniERXSysSlotIoaAssemblyRev OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..3))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The revision number of the I/O adaptor assembly on the card in this
|
|
slot."
|
|
DEFVAL { "" }
|
|
::= { juniERXSysSlotEntry 28 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
--
|
|
-- System Port objects
|
|
--
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniERXSysPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniERXSysPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Table of system physical ports.
|
|
|
|
The information in this table reflects the ports for the EXPECTED card
|
|
type in each slot; in event of a card mismatch, this table permits
|
|
navigation of the existing configuration of the expected card type."
|
|
::= { juniERXSysPort 1 }
|
|
|
|
juniERXSysPortEntry OBJECT-TYPE
|
|
SYNTAX JuniERXSysPortEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A table entry describing a physical port of the system."
|
|
INDEX { juniERXSysSlotIndex,
|
|
juniERXSysPortIndex }
|
|
::= { juniERXSysPortTable 1 }
|
|
|
|
JuniERXSysPortEntry ::= SEQUENCE {
|
|
juniERXSysPortIndex Integer32,
|
|
juniERXSysPortDescr DisplayString,
|
|
juniERXSysPortType INTEGER,
|
|
juniERXSysPortIfIndex InterfaceIndexOrZero }
|
|
|
|
juniERXSysPortIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Port number of this physical port, relative to the slot in which it
|
|
resides. Each physical port is uniquely distinguished by its slot/port
|
|
pair.
|
|
|
|
NOTE: Port numbers are zero-based."
|
|
::= { juniERXSysPortEntry 1 }
|
|
|
|
juniERXSysPortDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..63))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Textual description of this port."
|
|
::= { juniERXSysPortEntry 2 }
|
|
|
|
juniERXSysPortType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
eth(1),
|
|
ct3(2),
|
|
oc3c(3),
|
|
ut3Atm(4),
|
|
ut3Frame(5),
|
|
ue3Atm(6),
|
|
ue3Frame(7),
|
|
ce1(8),
|
|
ct1(9),
|
|
oc12cPos(10),
|
|
oc12cAtm(11),
|
|
oc3cPos(12),
|
|
oc3cAtm(13),
|
|
coc3(14),
|
|
coc12(15),
|
|
server(16),
|
|
hssi(17),
|
|
v35(18),
|
|
oc48cPos(19) }
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Type of the physical port:
|
|
unknown Unknown port type.
|
|
eth Ethernet.
|
|
ct3 Channelized T3.
|
|
oc3c OC-3c (SONET/SDH).
|
|
ut3Atm Unchannelized T3 (ATM service).
|
|
ut3Frame Unchannelized T3 (Frame service).
|
|
ue3Atm Unchannelized E3 (ATM service).
|
|
ue3Frame Unchannelized E3 (Frame service).
|
|
ce1 Channelized E1.
|
|
ct1 Channelized T1.
|
|
oc12cPos OC-12c (POS/SDH).
|
|
oc12cAtm OC-12c (ATM service).
|
|
oc3cPos OC-3c (POS/SDH).
|
|
oc3cAtm OC-3c (ATM service).
|
|
coc3 Channelized OC-3.
|
|
coc12 Channelized OC-12.
|
|
server Tunnel Server (no physical ports).
|
|
hssi High Speed Serial Interface.
|
|
v35 X.21/V.35.
|
|
oc48cPos OC-48c (POS/SDH)."
|
|
::= { juniERXSysPortEntry 3 }
|
|
|
|
juniERXSysPortIfIndex OBJECT-TYPE
|
|
SYNTAX InterfaceIndexOrZero
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The ifIndex of the Interfaces MIB ifTable entry corresponding to this
|
|
physical port; if zero, the ifIndex is unknown or does not exist."
|
|
::= { juniERXSysPortEntry 4 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
--
|
|
-- System Power objects
|
|
--
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniERXSysPowerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniERXSysPowerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Table of system power elements."
|
|
::= { juniERXSysPower 1 }
|
|
|
|
juniERXSysPowerEntry OBJECT-TYPE
|
|
SYNTAX JuniERXSysPowerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A table entry describing status of a system power element."
|
|
INDEX { juniERXSysPowerIndex }
|
|
::= { juniERXSysPowerTable 1 }
|
|
|
|
JuniERXSysPowerEntry ::= SEQUENCE {
|
|
juniERXSysPowerIndex Integer32,
|
|
juniERXSysPowerDescr DisplayString,
|
|
juniERXSysPowerStatus INTEGER }
|
|
|
|
juniERXSysPowerIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Arbitrary integer index to distinguish entries in this table."
|
|
::= { juniERXSysPowerEntry 1 }
|
|
|
|
juniERXSysPowerDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..63))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Textual description of this power element."
|
|
::= { juniERXSysPowerEntry 2 }
|
|
|
|
juniERXSysPowerStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
inactive(0),
|
|
active(1) }
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The status of the power element:
|
|
inactive No power available from this element.
|
|
active Power available from this element."
|
|
::= { juniERXSysPowerEntry 3 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
--
|
|
-- System Temp objects
|
|
--
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniERXSysTempFanStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
failed(0),
|
|
ok(1),
|
|
warning(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Status of fan subsystem.
|
|
ok All components operational
|
|
warning The fan subsystem has a non-critical failure.
|
|
failed The fan subsystem has a critical failure, or has been
|
|
removed, and is now non-operational."
|
|
::= { juniERXSysTemperature 1 }
|
|
|
|
|
|
juniERXSysTempTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniERXSysTempEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Table of system temperature sensors.
|
|
|
|
Sensors are distributed across the chassis, at least one sensor per
|
|
populated slot."
|
|
::= { juniERXSysTemperature 2 }
|
|
|
|
juniERXSysTempEntry OBJECT-TYPE
|
|
SYNTAX JuniERXSysTempEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A table entry describing status of a temperature sensor."
|
|
INDEX { juniERXSysSlotIndex,
|
|
juniERXSysTempIndex }
|
|
::= { juniERXSysTempTable 1 }
|
|
|
|
JuniERXSysTempEntry ::= SEQUENCE {
|
|
juniERXSysTempIndex Integer32,
|
|
juniERXSysTempDescr DisplayString,
|
|
juniERXSysTempStatus INTEGER,
|
|
juniERXSysTempValue Integer32 }
|
|
|
|
juniERXSysTempIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Arbitrary integer index to distinguish sensors associated with the same
|
|
chassis slot."
|
|
::= { juniERXSysTempEntry 1 }
|
|
|
|
juniERXSysTempDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..63))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Textual description of this sensor."
|
|
::= { juniERXSysTempEntry 2 }
|
|
|
|
juniERXSysTempStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
failed(1),
|
|
tooLow(2),
|
|
nominal(3),
|
|
tooHigh(4),
|
|
tooLowWarning(5),
|
|
tooHighWarning(6) }
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The status of a temperature sensor:
|
|
unknown unknown
|
|
failed failed
|
|
tooLow below nominal range
|
|
nominal within nominal range
|
|
tooHigh above nominal range
|
|
tooLowWarning near lower limit
|
|
tooHighWarning near upper limit"
|
|
::= { juniERXSysTempEntry 3 }
|
|
|
|
juniERXSysTempValue OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "degrees Celsius"
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The temperature measured by this sensor in degrees Celsius. This
|
|
measurement is valid only if the value of the corresponding
|
|
juniERXSysTempStatus is nominal."
|
|
::= { juniERXSysTempEntry 4 }
|
|
|
|
juniERXSysTempProtectionStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
monitoring(1),
|
|
inHoldOff(2),
|
|
activatedHoldOffExpired(3),
|
|
activatedTempTooHigh(4) }
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Thermal protection status:
|
|
monitoring monitoring
|
|
inHoldOff hold off time has begun
|
|
activatedHoldOffExpired hold off time has expired, the system
|
|
is in thermal protection mode
|
|
activatedTempTooHigh temperature too high, the system is in
|
|
thermal protection mode "
|
|
::= { juniERXSysTemperature 3 }
|
|
|
|
juniERXSysTempProtectionHoldOffTime OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1200)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The time, in seconds, before the system enters thermal protection mode
|
|
after a critical fan subsystem failure is detected."
|
|
DEFVAL { 150 }
|
|
::= { juniERXSysTemperature 4 }
|
|
|
|
juniERXSysTempProtectionHoldOffTimeRemaining OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1200)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The time remaining, in seconds, before the system enters thermal
|
|
protection mode while the thermal protection status is set to inHoldOff.
|
|
The value decrements every second until it reaches zero, and the status
|
|
changes to activatedHoldOffExpired. When the thermal protection status
|
|
is not inHoldOff or activatedHoldOffExpired, the value is set to the
|
|
hold off time."
|
|
DEFVAL { 150 }
|
|
::= { juniERXSysTemperature 5 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
--
|
|
-- Subsystem objects
|
|
--
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniERXSysSubsystemTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF JuniERXSysSubsystemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Table of subsystems."
|
|
::= { juniERXSysSubsystem 1 }
|
|
|
|
juniERXSysSubsystemEntry OBJECT-TYPE
|
|
SYNTAX JuniERXSysSubsystemEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A table entry containing information pertaining to a subsystem."
|
|
INDEX { juniERXSysSubsystemIndex }
|
|
::= { juniERXSysSubsystemTable 1 }
|
|
|
|
JuniERXSysSubsystemEntry ::= SEQUENCE {
|
|
juniERXSysSubsystemIndex Integer32,
|
|
juniERXSysSubsystemName DisplayString,
|
|
juniERXSysSubsystemControl INTEGER,
|
|
juniERXSysSubsystemBootReleaseFile DisplayString,
|
|
juniERXSysSubsystemBootBackupReleaseFile DisplayString }
|
|
|
|
juniERXSysSubsystemIndex OBJECT-TYPE
|
|
SYNTAX Integer32 (0..255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Subsystem number."
|
|
::= { juniERXSysSubsystemEntry 1 }
|
|
|
|
juniERXSysSubsystemName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The name of the subsystem."
|
|
::= { juniERXSysSubsystemEntry 2 }
|
|
|
|
juniERXSysSubsystemControl OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noOperation(0),
|
|
noBoot(1),
|
|
noBootBackup(2) }
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Administrative control of this subsystem:
|
|
noOperation Setting this value has no effect.
|
|
noBoot Deconfigure primary release file for the subsystem.
|
|
noBootBackup Deconfigure backup release file for the subsystem."
|
|
::= { juniERXSysSubsystemEntry 3 }
|
|
|
|
juniERXSysSubsystemBootReleaseFile OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The local boot release file name for this subsystem, with extension
|
|
.rel."
|
|
DEFVAL { "" }
|
|
::= { juniERXSysSubsystemEntry 4 }
|
|
|
|
juniERXSysSubsystemBootBackupReleaseFile OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE(0..128))
|
|
MAX-ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The local backup boot release file name for this subsystem, with
|
|
extension .rel."
|
|
DEFVAL { "" }
|
|
::= { juniERXSysSubsystemEntry 5 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Traps & Trap Control
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- The juniERXSysTrap OBJECT IDENTIFIER is used to define SNMPv2
|
|
-- Notifications that are easily translated into SNMPv1 Traps.
|
|
|
|
juniERXSysSlotOperStatusChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
juniERXSysSlotCurrentCardType,
|
|
juniERXSysSlotAdminStatus,
|
|
juniERXSysSlotOperStatus,
|
|
juniERXSysSlotDisableReason,
|
|
juniERXSysSlotSpareServer,
|
|
juniERXSysSlotAssociatedSlot,
|
|
juniERXSysSlotDescr }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Reports a status change for a slot.
|
|
|
|
This trap is generated on a transition into a stable state (online or
|
|
disabled) or on a transition out of online."
|
|
::= { juniERXSysTrap 1 }
|
|
|
|
juniERXSysPowerStatusChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
juniERXSysPowerStatus }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Reports a change in the status of a power element."
|
|
::= { juniERXSysTrap 2 }
|
|
|
|
juniERXSysTempFanStatusChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
juniERXSysTempFanStatus }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Reports a transition between the three states of the fan subsystem.
|
|
When the fan subsystem transitions to the failed state the thermal
|
|
protection hold off time begins."
|
|
::= { juniERXSysTrap 3 }
|
|
|
|
juniERXSysTempStatusChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
juniERXSysTempStatus }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Reports a change in the temperature status. When the status
|
|
transitions to the tooHigh state the system enters thermal protection
|
|
mode."
|
|
::= { juniERXSysTrap 4 }
|
|
|
|
juniERXSysHighMemUtil NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
juniERXSysMemCapacity,
|
|
juniERXSysMemUtilPct,
|
|
juniERXSysAbatedMemUtilThreshold,
|
|
juniERXSysHighMemUtilThreshold }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Report system memory utilization has met the conditions of
|
|
juniERXSysHighMemUtilThreshold."
|
|
::= { juniERXSysTrap 5 }
|
|
|
|
juniERXSysAbatedMemUtil NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
juniERXSysMemCapacity,
|
|
juniERXSysMemUtilPct,
|
|
juniERXSysAbatedMemUtilThreshold,
|
|
juniERXSysHighMemUtilThreshold }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Reports system memory utilization has met the conditions of
|
|
juniERXSysAbatedMemUtilThreshold."
|
|
::= { juniERXSysTrap 6 }
|
|
|
|
juniERXSysTempProtectionStatusChange NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
juniERXSysTempProtectionStatus,
|
|
juniERXSysTempProtectionHoldOffTimeRemaining }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Notification about changes in the state of Thermal Protection. This
|
|
notification is sent when the tempProtectionStatus changes. It is also
|
|
sent when the holdOffTimeRemaining is 50% of the holdOffTime."
|
|
::= { juniERXSysTrap 7 }
|
|
|
|
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
-- Conformance information
|
|
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
|
juniERXSysCompliances OBJECT IDENTIFIER ::= { juniERXSysConformance 1 }
|
|
juniERXSysGroups OBJECT IDENTIFIER ::= { juniERXSysConformance 2 }
|
|
|
|
--
|
|
-- compliance statements
|
|
--
|
|
juniERXSysCompliance MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete compliance statement for entities which implement the ERX
|
|
System MIB. This compliance statement became obsolete when new slot
|
|
information objects were added."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniERXSysGroup,
|
|
juniERXSysNotifyGroup }
|
|
::= { juniERXSysCompliances 1 } -- JUNOSe 1.3
|
|
|
|
juniERXSysCompliance1 MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete compliance statement for entities which implement the ERX
|
|
System MIB. This compliance statement became obsolete when the timing
|
|
group was added."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniERXSysGeneralGroup,
|
|
juniERXSysFabricGroup,
|
|
juniERXSysNvsGroup,
|
|
juniERXSysSlotGroup,
|
|
juniERXSysPortGroup,
|
|
juniERXSysPowerGroup,
|
|
juniERXSysTemperatureGroup,
|
|
juniERXSysSubsystemGroup,
|
|
juniERXSysNotifyGroup }
|
|
::= { juniERXSysCompliances 2 } -- JUNOSe 2.0
|
|
|
|
juniERXSysCompliance2 MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete compliance statement for entities which implement the ERX
|
|
System MIB. This compliance statement became obsolete when new memory
|
|
information objects and notifications were added."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniERXSysGeneralGroup,
|
|
juniERXSysTimingGroup,
|
|
juniERXSysFabricGroup,
|
|
juniERXSysNvsGroup,
|
|
juniERXSysSlotGroup,
|
|
juniERXSysPortGroup,
|
|
juniERXSysPowerGroup,
|
|
juniERXSysTemperatureGroup,
|
|
juniERXSysSubsystemGroup,
|
|
juniERXSysNotifyGroup }
|
|
::= { juniERXSysCompliances 3 } -- JUNOSe 3.0
|
|
|
|
juniERXSysCompliance3 MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete compliance statement for entities which implement the ERX
|
|
System MIB. This compliance statement became obsolete when new system
|
|
temperature information objects and notifications were added."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniERXSysGeneralGroup2,
|
|
juniERXSysTimingGroup,
|
|
juniERXSysFabricGroup,
|
|
juniERXSysNvsGroup,
|
|
juniERXSysSlotGroup,
|
|
juniERXSysPortGroup,
|
|
juniERXSysPowerGroup,
|
|
juniERXSysTemperatureGroup,
|
|
juniERXSysSubsystemGroup,
|
|
juniERXSysNotifyGroup2 }
|
|
::= { juniERXSysCompliances 4 } -- JUNOSe 3.2
|
|
|
|
juniERXSysCompliance4 MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete compliance statement for entities which implement the ERX
|
|
System MIB. This compliance statement became obsolete when the general
|
|
trap control object was added."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniERXSysGeneralGroup2,
|
|
juniERXSysTimingGroup,
|
|
juniERXSysFabricGroup,
|
|
juniERXSysNvsGroup,
|
|
juniERXSysSlotGroup,
|
|
juniERXSysPortGroup,
|
|
juniERXSysPowerGroup,
|
|
juniERXSysTemperatureGroup2,
|
|
juniERXSysSubsystemGroup,
|
|
juniERXSysNotifyGroup3 }
|
|
::= { juniERXSysCompliances 5 } -- JUNOSe 3.3
|
|
|
|
juniERXSysCompliance5 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the ERX System
|
|
MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
juniERXSysGeneralGroup3,
|
|
juniERXSysTimingGroup,
|
|
juniERXSysFabricGroup,
|
|
juniERXSysNvsGroup,
|
|
juniERXSysSlotGroup,
|
|
juniERXSysPortGroup,
|
|
juniERXSysPowerGroup,
|
|
juniERXSysTemperatureGroup2,
|
|
juniERXSysSubsystemGroup,
|
|
juniERXSysNotifyGroup3 }
|
|
::= { juniERXSysCompliances 6 } -- JUNOSe 4.1
|
|
|
|
|
|
--
|
|
-- units of conformance
|
|
--
|
|
juniERXSysGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
-- General chassis objects
|
|
juniERXSysChassisRev,
|
|
juniERXSysSwVersion,
|
|
juniERXSysSwBuildDate,
|
|
juniERXSysRevertControl,
|
|
juniERXSysRevertTimeOfDay,
|
|
juniERXSysBootConfigControl,
|
|
juniERXSysBootBackupConfigControl,
|
|
juniERXSysBootForceBackupControl,
|
|
juniERXSysBootAutoRevertControl,
|
|
juniERXSysBootAutoRevertCountTolerance,
|
|
juniERXSysBootAutoRevertTimeTolerance,
|
|
juniERXSysBootReleaseFile,
|
|
juniERXSysBootConfigFile,
|
|
juniERXSysBootBackupReleaseFile,
|
|
juniERXSysBootBackupConfigFile,
|
|
|
|
-- Fabric objects
|
|
juniERXSysFabricSpeed,
|
|
juniERXSysFabricRev,
|
|
|
|
-- NVS objects
|
|
juniERXSysNvsStatus,
|
|
juniERXSysNvsCapacity,
|
|
juniERXSysNvsUtilPct,
|
|
|
|
-- Slot objects
|
|
juniERXSysSlotCount,
|
|
juniERXSysSlotDescr,
|
|
juniERXSysSlotCurrentCardType,
|
|
juniERXSysSlotRev,
|
|
juniERXSysSlotAdminStatus,
|
|
juniERXSysSlotOperStatus,
|
|
juniERXSysSlotDisableReason,
|
|
juniERXSysSlotExpectedCardType,
|
|
juniERXSysSlotControl,
|
|
juniERXSysSlotCpuUtilPct,
|
|
juniERXSysSlotMemUtilPct,
|
|
juniERXSysSlotIoaPresent,
|
|
juniERXSysSlotPortCount,
|
|
juniERXSysSlotLastChange,
|
|
juniERXSysSlotRedundancyLockout,
|
|
juniERXSysSlotRedundancyGroupId,
|
|
juniERXSysSlotSpareServer,
|
|
juniERXSysSlotAssociatedSlot,
|
|
juniERXSysSlotRevertControl,
|
|
juniERXSysSlotRedundancyRevertTime,
|
|
juniERXSysSlotBootReleaseFile,
|
|
juniERXSysSlotBootBackupReleaseFile,
|
|
|
|
-- Port objects
|
|
juniERXSysPortDescr,
|
|
juniERXSysPortType,
|
|
juniERXSysPortIfIndex,
|
|
|
|
-- Power objects
|
|
juniERXSysPowerDescr,
|
|
juniERXSysPowerStatus,
|
|
|
|
-- Temperature objects
|
|
juniERXSysTempFanStatus,
|
|
juniERXSysTempDescr,
|
|
juniERXSysTempStatus,
|
|
juniERXSysTempValue,
|
|
|
|
-- Subsystem objects
|
|
juniERXSysSubsystemName,
|
|
juniERXSysSubsystemControl,
|
|
juniERXSysSubsystemBootReleaseFile,
|
|
juniERXSysSubsystemBootBackupReleaseFile }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete collection of management objects pertaining to system
|
|
capabilities in a Juniper product. This group became obsolete when new
|
|
slot information objects were added."
|
|
::= { juniERXSysGroups 1 } -- JUNOSe 1.3
|
|
|
|
juniERXSysNotifyGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
juniERXSysSlotOperStatusChange,
|
|
juniERXSysPowerStatusChange,
|
|
juniERXSysTempFanStatusChange,
|
|
juniERXSysTempStatusChange }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete collection of management notifications pertaining to system
|
|
operations in a Juniper product. This group became obsolete when new
|
|
memory threshold notificaitons were added."
|
|
::= { juniERXSysGroups 2 } -- JUNOSe 1.3
|
|
|
|
juniERXSysGeneralGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniERXSysChassisRev,
|
|
juniERXSysSwVersion,
|
|
juniERXSysSwBuildDate,
|
|
juniERXSysRevertControl,
|
|
juniERXSysRevertTimeOfDay,
|
|
juniERXSysBootConfigControl,
|
|
juniERXSysBootBackupConfigControl,
|
|
juniERXSysBootForceBackupControl,
|
|
juniERXSysBootAutoRevertControl,
|
|
juniERXSysBootAutoRevertCountTolerance,
|
|
juniERXSysBootAutoRevertTimeTolerance,
|
|
juniERXSysBootReleaseFile,
|
|
juniERXSysBootConfigFile,
|
|
juniERXSysBootBackupReleaseFile,
|
|
juniERXSysBootBackupConfigFile }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete collection of management objects pertaining to general system
|
|
capabilities in a Juniper product. This group became obsolete when new
|
|
memory management objects were added."
|
|
::= { juniERXSysGroups 3 } -- JUNOSe 2.0
|
|
|
|
juniERXSysFabricGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniERXSysFabricSpeed,
|
|
juniERXSysFabricRev }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of management objects pertaining to system fabric
|
|
capabilities in a Juniper product."
|
|
::= { juniERXSysGroups 4 } -- JUNOSe 2.0
|
|
|
|
juniERXSysNvsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniERXSysNvsStatus,
|
|
juniERXSysNvsCapacity,
|
|
juniERXSysNvsUtilPct }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of management objects pertaining to non-volitile storage
|
|
subsystem capabilities in a Juniper product."
|
|
::= { juniERXSysGroups 5 } -- JUNOSe 2.0
|
|
|
|
juniERXSysSlotGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniERXSysSlotCount,
|
|
juniERXSysSlotDescr,
|
|
juniERXSysSlotCurrentCardType,
|
|
juniERXSysSlotRev,
|
|
juniERXSysSlotAdminStatus,
|
|
juniERXSysSlotOperStatus,
|
|
juniERXSysSlotDisableReason,
|
|
juniERXSysSlotExpectedCardType,
|
|
juniERXSysSlotControl,
|
|
juniERXSysSlotCpuUtilPct,
|
|
juniERXSysSlotMemUtilPct,
|
|
juniERXSysSlotIoaPresent,
|
|
juniERXSysSlotPortCount,
|
|
juniERXSysSlotLastChange,
|
|
juniERXSysSlotRedundancyLockout,
|
|
juniERXSysSlotRedundancyGroupId,
|
|
juniERXSysSlotSpareServer,
|
|
juniERXSysSlotAssociatedSlot,
|
|
juniERXSysSlotRevertControl,
|
|
juniERXSysSlotRedundancyRevertTime,
|
|
juniERXSysSlotBootReleaseFile,
|
|
juniERXSysSlotBootBackupReleaseFile,
|
|
juniERXSysSlotSerialNumber,
|
|
juniERXSysSlotAssemblyPartNumber,
|
|
juniERXSysSlotAssemblyRev,
|
|
juniERXSysSlotIoaSerialNumber,
|
|
juniERXSysSlotIoaAssemblyPartNumber,
|
|
juniERXSysSlotIoaAssemblyRev }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of management objects pertaining to slot-specific system
|
|
capabilities in a Juniper product."
|
|
::= { juniERXSysGroups 6 } -- JUNOSe 2.0
|
|
|
|
juniERXSysPortGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniERXSysPortDescr,
|
|
juniERXSysPortType,
|
|
juniERXSysPortIfIndex }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of management objects pertaining to port-related system
|
|
capabilities in a Juniper product."
|
|
::= { juniERXSysGroups 7 } -- JUNOSe 2.0
|
|
|
|
juniERXSysPowerGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniERXSysPowerDescr,
|
|
juniERXSysPowerStatus }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of management objects pertaining to the power subsystem
|
|
capabilities in a Juniper product."
|
|
::= { juniERXSysGroups 8 } -- JUNOSe 2.0
|
|
|
|
juniERXSysTemperatureGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniERXSysTempFanStatus,
|
|
juniERXSysTempDescr,
|
|
juniERXSysTempStatus,
|
|
juniERXSysTempValue }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete collection of management objects pertaining to system
|
|
temperature monitoring capabilities in a Juniper product. This group
|
|
became obsolete when temperature shutdown parameters were added."
|
|
::= { juniERXSysGroups 9 } -- JUNOSe 2.0
|
|
|
|
juniERXSysSubsystemGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniERXSysSubsystemName,
|
|
juniERXSysSubsystemControl,
|
|
juniERXSysSubsystemBootReleaseFile,
|
|
juniERXSysSubsystemBootBackupReleaseFile }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of management objects pertaining to subsystem capabilities
|
|
in a Juniper product."
|
|
::= { juniERXSysGroups 10 } -- JUNOSe 2.0
|
|
|
|
juniERXSysTimingGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
juniERXSysAdminTimingSource,
|
|
juniERXSysOperTimingSource,
|
|
juniERXSysTimingDisableAutoUpgrade,
|
|
|
|
juniERXSysTimingSourceType,
|
|
juniERXSysTimingSourceIfIndex,
|
|
juniERXSysTimingSourceLine,
|
|
juniERXSysTimingStatus }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of management objects pertaining to system timing
|
|
capabilities in a Juniper product."
|
|
::= { juniERXSysGroups 11 } -- JUNOSe 3.0
|
|
|
|
juniERXSysGeneralGroup2 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniERXSysChassisRev,
|
|
juniERXSysSwVersion,
|
|
juniERXSysSwBuildDate,
|
|
juniERXSysRevertControl,
|
|
juniERXSysRevertTimeOfDay,
|
|
juniERXSysBootConfigControl,
|
|
juniERXSysBootBackupConfigControl,
|
|
juniERXSysBootForceBackupControl,
|
|
juniERXSysBootAutoRevertControl,
|
|
juniERXSysBootAutoRevertCountTolerance,
|
|
juniERXSysBootAutoRevertTimeTolerance,
|
|
juniERXSysBootReleaseFile,
|
|
juniERXSysBootConfigFile,
|
|
juniERXSysBootBackupReleaseFile,
|
|
juniERXSysBootBackupConfigFile,
|
|
juniERXSysMemUtilPct,
|
|
juniERXSysMemCapacity,
|
|
juniERXSysHighMemUtilThreshold,
|
|
juniERXSysAbatedMemUtilThreshold,
|
|
juniERXSysMemUtilTrapEnable }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete collection of management objects pertaining to general system
|
|
capabilities in a Juniper product. This group became obsolete when the
|
|
general trap control object was added."
|
|
::= { juniERXSysGroups 12 } -- JUNOSe 3.2
|
|
|
|
juniERXSysNotifyGroup2 NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
juniERXSysSlotOperStatusChange,
|
|
juniERXSysPowerStatusChange,
|
|
juniERXSysTempFanStatusChange,
|
|
juniERXSysTempStatusChange,
|
|
juniERXSysHighMemUtil,
|
|
juniERXSysAbatedMemUtil }
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"Obsolete collection of management notifications pertaining to system
|
|
operations in a Juniper product. This group became obsolete when the
|
|
tempProtectionStatusChange notification was added."
|
|
::= { juniERXSysGroups 13 } -- JUNOSe 3.2
|
|
|
|
juniERXSysTemperatureGroup2 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniERXSysTempFanStatus,
|
|
juniERXSysTempDescr,
|
|
juniERXSysTempStatus,
|
|
juniERXSysTempValue,
|
|
juniERXSysTempProtectionStatus,
|
|
juniERXSysTempProtectionHoldOffTime,
|
|
juniERXSysTempProtectionHoldOffTimeRemaining }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of management objects pertaining to system temperature
|
|
monitoring capabilities in a Juniper product."
|
|
::= { juniERXSysGroups 14 } -- JUNOSe 3.3
|
|
|
|
juniERXSysNotifyGroup3 NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
juniERXSysSlotOperStatusChange,
|
|
juniERXSysPowerStatusChange,
|
|
juniERXSysTempFanStatusChange,
|
|
juniERXSysTempStatusChange,
|
|
juniERXSysHighMemUtil,
|
|
juniERXSysAbatedMemUtil,
|
|
juniERXSysTempProtectionStatusChange }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of management notifications pertaining to system
|
|
operations in a Juniper product."
|
|
::= { juniERXSysGroups 15 } -- JUNOSe 3.3
|
|
|
|
juniERXSysGeneralGroup3 OBJECT-GROUP
|
|
OBJECTS {
|
|
juniERXSysChassisRev,
|
|
juniERXSysSwVersion,
|
|
juniERXSysSwBuildDate,
|
|
juniERXSysRevertControl,
|
|
juniERXSysRevertTimeOfDay,
|
|
juniERXSysBootConfigControl,
|
|
juniERXSysBootBackupConfigControl,
|
|
juniERXSysBootForceBackupControl,
|
|
juniERXSysBootAutoRevertControl,
|
|
juniERXSysBootAutoRevertCountTolerance,
|
|
juniERXSysBootAutoRevertTimeTolerance,
|
|
juniERXSysBootReleaseFile,
|
|
juniERXSysBootConfigFile,
|
|
juniERXSysBootBackupReleaseFile,
|
|
juniERXSysBootBackupConfigFile,
|
|
juniERXSysMemUtilPct,
|
|
juniERXSysMemCapacity,
|
|
juniERXSysHighMemUtilThreshold,
|
|
juniERXSysAbatedMemUtilThreshold,
|
|
juniERXSysMemUtilTrapEnable,
|
|
juniERXSysGeneralTrapEnable }
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"A collection of management objects pertaining to general system
|
|
capabilities in a Juniper product."
|
|
::= { juniERXSysGroups 16 } -- JUNOSe 4.1
|
|
|
|
END
|