mirror/librenms-librenms
1
0
Fork 0
mirror of https://github.com/librenms/librenms.git synced 2024-10-07 16:52:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
Files
ececd2f8f69457cbc6391892d068adaff25f1dbd
librenms-librenms/mibs/HP-ICF-GENERIC-RPTR
Adam Amstrong a4ef7f5506 move more mibs to route (hp and allied telesis/syn) 
git-svn-id: http://www.observium.org/svn/observer/trunk@1577 61d68cd4-352d-0410-923a-c4978735b2b8
2010-07-31 16:56:02 +00:00

2179 lines
95 KiB
Plaintext
Raw Blame History

HP-ICF-GENERIC-RPTR DEFINITIONS ::= BEGIN
IMPORTS
Integer32,
OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
MacAddress, DisplayString, RowStatus, TimeStamp
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
hpicfObjectModules, hpicfGenericRepeater, icfHub,
hpicfGenRptrTrapsPrefix
FROM HP-ICF-OID;
hpicfGenRptrMib MODULE-IDENTITY
LAST-UPDATED "200306092237Z" -- June 9, 2003
ORGANIZATION "Hewlett Packard Company,
Network Infrastructure Solutions"
CONTACT-INFO
"Hewlett Packard Company
8000 Foothills Blvd.
Roseville, CA 95747"
DESCRIPTION
"This MIB module contains object definitions that
are common to all repeater devices in the HP
Integrated Communication Facility product
line."
REVISION "200306092237Z" -- June 9, 2003
DESCRIPTION "Added learnLimitedContinuous mode to
hpSecPtLearnMode."
REVISION "200011030717Z" -- November 3, 2000
DESCRIPTION "Deprecate hpSecPtPreventEavesdrop. Update
division name."
REVISION "9807230103Z" -- July 23, 1998
DESCRIPTION
"Added the hpicfGenRptrBridgeGroup. Updated
compliances."
REVISION "9703060337Z" -- March 6, 1997
DESCRIPTION
"Added the hpicfGenRptrSwitchConfigGroup. Added
NOTIFICATION-GROUP information."
REVISION "9609100228Z" -- September 10, 1996
DESCRIPTION
"Split this MIB module from the former monolithic
hp-icf MIB. Added the hpicfGenRptrInfoGroup, the
hpicfGenRptrBkpLinkGroup, and the
hpicfGenRptrPortMappingGroup."
REVISION "9510232347Z" -- October 23, 1995
DESCRIPTION
"Version of MIB module that added support for
the HPJ2413A and HPJ2415A 100VG hubs, and the
HPJ2414B agent module. Added the
hpicfGenRptrSecPtGroup."
REVISION "9501180000Z" -- January 18, 1995
DESCRIPTION
"Version of MIB module that added support for
the HPJ2410A 100VG repeater and the HPJ2414A
agent module. Added the hpicfGenRptrBasicGroup."
REVISION "9307090000Z" -- July 9, 1993
DESCRIPTION
"Initial version of this MIB module. Released
with the HPJ2355A hub."
::= { hpicfObjectModules 8 }
hpGRpBasic
OBJECT IDENTIFIER ::= { hpicfGenericRepeater 1 }
hpGRpBasicGlobal
OBJECT IDENTIFIER ::= { hpGRpBasic 1 }
hpGRpSelfHealEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This flag controls whether or not the device will
send self healing packets. Self healing packets are
normally sent once per second by the agent when no
other traffic is present. When there is no traffic
present on a network, there is no way to detect
cabling problems (or the repair of cabling problems)
and status LEDs are not always correct.
Enabling this flag allows the agent to detect cabling
problems on an idle network. This flag can be
disabled if self healing packets are not wanted.
On the 100BaseVG-AnyLAN SNMP/Bridge card, these
packets are addressed to a unique unused unicast
station address which has been reserved by HP for
this purpose. On 802.3 repeaters, these packets are
self addressed.
On an 802.3 repeater, this flag MUST be enabled when
using the Robust Port Healing feature. Without
Robust Port Healing either a good transmit or a good
receive will reconnect an autopartitioned port. With
Robust Port Healing the criteria is more restrictive
and only a good transmit will heal a segmented port.
If all ports are segmented, the repeater will not
repeat anything until the agent transmits a self
healing packet and reconnects the autopartitioned
ports."
::= { hpGRpBasicGlobal 1 }
hpGRpRepeaterTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpGRpRepeaterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing generic information about the
current logical repeaters in this managed system."
::= { hpGRpBasicGlobal 2 }
hpGRpRepeaterEntry OBJECT-TYPE
SYNTAX HpGRpRepeaterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about
a single logical repeater."
INDEX { hpGRpRepeaterIndex }
::= { hpGRpRepeaterTable 1 }
HpGRpRepeaterEntry ::=
SEQUENCE {
hpGRpRepeaterIndex Integer32,
hpGRpRepeaterIfIndex Integer32,
hpGRpRepeaterName DisplayString,
hpGRpRepeaterVlanIndex Integer32
}
hpGRpRepeaterIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely identifies the logical repeater
in the managed system for which this entry contains
information. This object will have the same value
as the corresponding 'repeater index' object in the
media-specific repeater MIB for this repeater. Note
that it will also have the same value as the
instance of the Entity MIB's entLogicalIndex for
the entry in the entLogicalTable that represents
this repeater."
::= { hpGRpRepeaterEntry 1 }
hpGRpRepeaterIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface on the agent that is used to transmit
and receive packets through this repeater. The
ifEntry identified by this value is the same entry
identified by the same value of the ifIndex object.
The value zero indicates that the agent has no
interface through which it can send and receive
packets on this repeater."
::= { hpGRpRepeaterEntry 2 }
hpGRpRepeaterName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A friendly name for this repeater. Management
applications can use this to configure a user
friendly name for this logical repeater."
::= { hpGRpRepeaterEntry 3 }
hpGRpRepeaterVlanIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The virtual LAN that this repeater is on. Note that
setting this object does not affect the operation of
the repeater in any way. It is a 'notepad' for
management applications to allow them to record
which VLAN on a connected switch this logical
repeater is connected to."
::= { hpGRpRepeaterEntry 4 }
-- The Generic Repeater Security group.
hubSecurity OBJECT IDENTIFIER ::= { icfHub 10 }
hubSecurePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HubSecurePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing security configuration for each
port."
::= { hubSecurity 1 }
hubSecurePortEntry OBJECT-TYPE
SYNTAX HubSecurePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the hubSecurePortTable, containing
the security configuration for a single port."
INDEX { hubSecPtGroupIndex, hubSecPtPortIndex }
::= { hubSecurePortTable 1 }
HubSecurePortEntry ::=
SEQUENCE {
hubSecPtGroupIndex Integer32,
hubSecPtPortIndex Integer32,
hubSecPtSecurityAddress MacAddress,
hubSecPtAuthorizedAddress MacAddress,
hubSecPtPreventEavesdrop INTEGER,
hubSecPtAlarmEnable INTEGER,
hubSecPtIntrusionFlag INTEGER
}
hubSecPtGroupIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the group containing the
port for which this entry contains security
configuration information."
::= { hubSecurePortEntry 1 }
hubSecPtPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the port within the group
for which this entry contains security
configuration information."
::= { hubSecurePortEntry 2 }
hubSecPtSecurityAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired authorized MAC address for this port.
This can be either a regular station address to
configure a specific address, or it can be one of
the following special values to specify the
address learning method:
FFFF-FFFF-FFFE: learnOnce. First source MAC
address heard on this port becomes the
authorized address. Setting this value
initiates learning of a new authorized
address. When a new authorized address is
learned, it will be stored in nonvolatile
memory. This variable will return
learnOnceConditionally to a GET operation
after it has been set to this value.
FFFF-FFFF-FFFD: learnOnceConditionally. This
option will initiate learning of a new
authorized address only if the previous
hubSecPtSecurityAddress was set to a
specific address or learnContinuous. No
action will be performed if the previous
value was already learnOnceConditionally.
FFFF-FFFF-FFFC: learnContinuous. Any address
heard becomes the new authorized address.
When a new address is learned, it may
cause an alarm, but it does not store
anything in nonvolatile memory."
::= { hubSecurePortEntry 3 }
hubSecPtAuthorizedAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the station authorized to be
on this port. This address could either have been
configured by specifying a regular station address
for hubSecPtSecurityAddress, or it could have been
learned by the agent if hubSecPtSecurityAddress
was set to one of the special values listed above.
Once the agent has learned an authorized address,
it will be saved across powerfails, unless the
agent was configured for learnContinuous mode."
::= { hubSecurePortEntry 4 }
hubSecPtPreventEavesdrop OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, unicast packets not addressed to the
authorized address for this port will be
scrambled."
::= { hubSecurePortEntry 5 }
hubSecPtAlarmEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, the agent will generate an
intrusionTrap if a packet is received on this port
with a source MAC address that is different from
the hubSecPtAuthorizedAddress for this port."
::= { hubSecurePortEntry 6 }
hubSecPtIntrusionFlag OBJECT-TYPE
SYNTAX INTEGER {
intrusion(1),
noIntrusion(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This flag indicates if an intrusion has occurred
on this port. The Security LED on the hub will
blink if any instance of this flag has the value
intrusion. Setting this flag to noIntrusion will
turn off the Security LED if no other ports have
this flag set to intrusion. An intrusion will
only cause an alarm and an intrusion log entry if
this flag is equal to noIntrusion."
::= { hubSecurePortEntry 7 }
hubIntruderLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF HubIntruderLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a record of the twenty most
recent port security violations. The first entry
in the table is the oldest."
::= { hubSecurity 2 }
hubIntruderLogEntry OBJECT-TYPE
SYNTAX HubIntruderLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the hubIntruderLogTable containing
information about a single port security
violation."
INDEX { hubIntruderIndex }
::= { hubIntruderLogTable 1 }
HubIntruderLogEntry ::=
SEQUENCE {
hubIntruderIndex Integer32,
hubIntruderGroup Integer32,
hubIntruderPort Integer32,
hubIntruderAddress MacAddress,
hubIntruderTime TimeStamp,
hubIntruderType INTEGER,
hubIntruderTrainingViolation INTEGER
}
hubIntruderIndex OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of this entry in the intruder log
table. Index 1 will always contain the oldest
entry. If the table is full when a new intrusion
occurs, the new entry becomes index 20, and all
earlier entries are shifted down by one entry,
removing the old index 1."
::= { hubIntruderLogEntry 1 }
hubIntruderGroup OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the group containing the
port on which this intrusion occurred."
::= { hubIntruderLogEntry 2 }
hubIntruderPort OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the port within the group
on which this intrusion occurred. A port number
of zero indicates that this entry is unused and
the values for the other variables in this entry
are undefined."
::= { hubIntruderLogEntry 3 }
hubIntruderAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the source MAC address of
the intruder."
::= { hubIntruderLogEntry 4 }
hubIntruderTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the intrusion
occurred. This will be zero if the agent has been
reset since the intruder was detected, since
sysUpTime could be misinterpreted in that case."
::= { hubIntruderLogEntry 5 }
hubIntruderType OBJECT-TYPE
SYNTAX INTEGER {
address(1),
training(2),
both(3),
none(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the type of violation that
occured: address, training, or both. The
hubIntruderTrainingViolation object will indicate
additional information, if any, on the type of
training violation. This object will be equal to
'none' if this log entry is unused. Note that
the values 'training' and 'both' are only valid
for 802.12 ports."
::= { hubIntruderLogEntry 6 }
hubIntruderTrainingViolation OBJECT-TYPE
SYNTAX INTEGER {
noViolation(1),
promiscuousViolation(2),
repeaterViolation(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the type of training
violation. Note that for 802.3 ports,
this object will always be equal to 'noViolation'.
This object will be equal to 'noViolation' if this
log entry is unused."
::= { hubIntruderLogEntry 7 }
hpSecurePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpSecurePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing security configuration
for each port, where security for multiple
MAC addresses per port is desired (e.g.,
switch systems)."
::= { hubSecurity 3 }
hpSecurePortEntry OBJECT-TYPE
SYNTAX HpSecurePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the hpSecurePortTable, containing
the security configuration for a single port."
INDEX { hpSecPtGroupIndex, hpSecPtPortIndex }
::= { hpSecurePortTable 1 }
HpSecurePortEntry ::=
SEQUENCE {
hpSecPtGroupIndex Integer32,
hpSecPtPortIndex Integer32,
hpSecPtAddressLimit Integer32,
hpSecPtLearnMode INTEGER,
hpSecPtPreventEavesdrop INTEGER,
hpSecPtAlarmEnable INTEGER,
hpSecPtIntrusionFlag INTEGER
}
hpSecPtGroupIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the group containing the
port for which this entry contains security
configuration information. On repeater systems,
this can be used to identify a specific repeater
within a managed stack of repeaters. On switch
systems, stacked or unstacked, this value is
always one."
::= { hpSecurePortEntry 1 }
hpSecPtPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the port within the group
for which this entry contains security
configuration information. On a switch system,
this index corresponds to the ifIndex of the port."
::= { hpSecurePortEntry 2 }
hpSecPtAddressLimit OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the maximum number of
MAC addresses learned on this port when the
hpSecPtLearnMode is set to learnFirstN or
learnFirstNConditionally. Changing the limit
while in these modes clears any addresses for
this port in the hpSecureAuthAddrTable.
This limit does not apply when the learn mode
is set to configureSpecific."
::= { hpSecurePortEntry 3 }
hpSecPtLearnMode OBJECT-TYPE
SYNTAX INTEGER {
learnContinuous(1),
learnFirstN(2),
learnFirstNConditionally(3),
configureSpecific(4),
learn8021xAuthorized(5),
learnLimitedContinuous(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the learning mode of the port.
The modes are as follows:
LearnContinuous. The port can learn all new MAC
addresses. When a new address is learned,
it is stored in a manner such that it can
be retrieved from the hpSecureAuthAddrTable.
Changing the mode to this value clears any
existing addresses for this port in the
hpSecureAuthAddrTable.
learnFirstN. First N source MAC addresses heard
on this port become the authorized addresses.
N is configured in hpSecPtAddressLimit.
Setting this value initiates learning of up
to N new authorized addresses. When a new
authorized address is learned, it will be
stored in the hpSecureAuthAddrTable. When
the table has reached its limit N for this
port, any new source MAC addresses received
on the port constitutes an intrusion. See
hpSecPtAlarmEnable for possible responses
to the intrusion. This variable will return
learnFirstNConditionally to a GET operation
after it has been set to this value.
learnFirstNConditionally. This option will
initiate learning of up to N new authorized
addresses only if the previous hpSecPtLearnMode
was not set to learnFirstN or learnFirstN-
Conditionally. N is configured in
hpSecPtAddressLimit.
configureSpecific. The port will not learn any
addresses. Rather, specific authorized
MAC addresses for this port are explicitly
configured via the hpSecureCfgAddrTable.
These addresses are also stored in the
hpSecureAuthAddrTable. Any source MAC
address received on this port other than
those configured, constitutes an intrusion.
See hpSecPtAlarmEnable for possible responses.
learn8021xAuthorized. The port will learn only MAC
address of a client authorized by 802.1X
authenticator.
learnLimitedContinuous. First N source MAC addresses
heard on this port become the authorized addresses.
N is specified by the hpSecPtAddressLimit
object. When a new authorized address is learned, it
will be stored in the hpSecureAuthAddrTable. When
the table has reached its limit N for this port, any
new source MAC addresses received on the port
constitutes an intrusion. See hpSecPtAlarmEnable
for possible responses. The authorized addresses in
this mode will age out of the system, therefore the
list of authorized addresses can be dynamic over
time."
::= { hpSecurePortEntry 4 }
hpSecPtPreventEavesdrop OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"If enabled on a switch, outbound unknown unicast
packets will not be forwarded out this port. If
enabled on a repeater, outbound unknown unicast
packets for this port will be scrambled."
::= { hpSecurePortEntry 5 }
hpSecPtAlarmEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
sendTrap(2),
sendTrapAndDisablePort(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the action taken when an
intrusion occurs. See hpSecPtLearnMode for what
constitutes an intrusion.
disable. No trap is sent and the port
remains enabled.
SendTrap. If the hpSecPtIntrusionFlag is
set to noIntrusion, the agent will generate
an intrusionTrap.
SendTrapAndDisablePort. If the hpSecPtIntru-
sionFlag is set to noIntrusion, the agent
generate an intrusionTrap and disable
the port. This value does not apply to
repeaters."
::= { hpSecurePortEntry 6 }
hpSecPtIntrusionFlag OBJECT-TYPE
SYNTAX INTEGER {
intrusion(1),
noIntrusion(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This flag indicates if an intrusion has occured
on this port. Security-related LED(s) on the
device will blink if any instance of this flag
has the value intrusion. Setting this flag to
noIntrusion will turn off the appropriate LED(s).
An intrusion will only cause an alarm and an
intrusion log entry if this flag is equal to
noIntrusion. On a switch, packets causing
intrusions will be not be forwarded."
::= { hpSecurePortEntry 7 }
hpSecureCfgAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpSecureCfgAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing multiple configured authorized
addresses per port. Facilitates security
for ports whose hpSecPtLearnMode is set to
configureSpecific."
::= { hubSecurity 4 }
hpSecureCfgAddrEntry OBJECT-TYPE
SYNTAX HpSecureCfgAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the hpSecureCfgAddrTable, containing
the configured authorized address for a single
port. Entries are stored in nonvolatile memory
when either the hpSecPtrLearnMode for the port
is changed to configureSpecific, or a new entry
is configured while hpSecPtrLearnMode for the
port is currently set to configureSpecific."
INDEX { hpSecCfgAddrGroupIndex,
hpSecCfgAddrPortIndex,
hpSecCfgAddress}
::= { hpSecureCfgAddrTable 1 }
HpSecureCfgAddrEntry ::=
SEQUENCE {
hpSecCfgAddrGroupIndex Integer32,
hpSecCfgAddrPortIndex Integer32,
hpSecCfgAddress MacAddress,
hpSecCfgStatus RowStatus
}
hpSecCfgAddrGroupIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the group containing the
port for which this entry contains the configured
authorized address. On repeater systems,
this can be used to identify a specific repeater
within a managed stack of repeaters. On switch
systems, stacked or unstacked, this value is
always one."
::= { hpSecureCfgAddrEntry 1 }
hpSecCfgAddrPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the port within the group
for which this entry contains the configured
authorized address. On a switch, this index
corresponds to the ifIndex of the port."
::= { hpSecureCfgAddrEntry 2 }
hpSecCfgAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A specific authorized MAC address for this port
configured by a management station."
::= { hpSecureCfgAddrEntry 3 }
hpSecCfgStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status of a hpSecureCfgAddrEntry."
::= { hpSecureCfgAddrEntry 4 }
hpSecureAuthAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpSecureAuthAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing the authorized addresses for
each port. An authorized address is an address
learned while the hpSecPtLearnMode for the port
is set to learnContinuous, learnFirstN,
learnLimitedContinuous, or learnFirstNConditionally;
or an address in the hpSecureCfgAddrTable when the
hpSecPtLearnMode for the port is set to configureSpecific.
On a switch, for ports whose hpSecPtLearnMode
is set to learnContinuous or learnLimitedContinuous,
this table may return MAC address information based
on the switch's 802.1d forwarding database."
::= { hubSecurity 5 }
hpSecureAuthAddrEntry OBJECT-TYPE
SYNTAX HpSecureAuthAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the hpSecureAuthAddrTable,
containing the authorized address for a single
port. Entries are stored in nonvolatile memory
except when the port's hpSecPtLearnMode is set
to learnContinuous or learnLimitedContinuous."
INDEX { hpSecAuthAddrGroupIndex,
hpSecAuthAddrPortIndex,
hpSecAuthAddress }
::= { hpSecureAuthAddrTable 1 }
HpSecureAuthAddrEntry ::=
SEQUENCE {
hpSecAuthAddrGroupIndex Integer32,
hpSecAuthAddrPortIndex Integer32,
hpSecAuthAddress MacAddress
}
hpSecAuthAddrGroupIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the group containing the
port for which this entry contains authorized
address information. On repeater systems,
this can be used to identify a specific repeater
within a managed stack of repeaters. On switch
systems, stacked or unstacked, this value is
always one."
::= { hpSecureAuthAddrEntry 1 }
hpSecAuthAddrPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the port within the group
for which this entry contains authorized
address information. On a switch, this index
corresponds to ifIndex of the port."
::= { hpSecureAuthAddrEntry 2 }
hpSecAuthAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the station authorized to be
on this port. See hpSecureAuthAddrTable for
the definition of 'authorized address'."
::= { hpSecureAuthAddrEntry 3 }
-- The Generic Repeater backup links group
hpicfGRpBackupLinks
OBJECT IDENTIFIER ::= { hpicfGenericRepeater 2 }
hpicfBackupLinkNextIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A currently unassigned value of
hpicfBackupLinkIndex. The value 0 indicates that no
unassigned values are available.
In order to cause a non-zero value of this object to
be assigned for use as the hpicfBackupLinkIndex of a
future backup link configuration, it must be
successfully modified by a set operation. When
modified by a set operation, the new value must
precisely match the value presently held by the
object. If not, the management protocol set
operation will fail.
Immediately after the completion of a successful set
operation, the agent must modify the value of this
object. The algorithm for modifying the value is
implementation-dependent, and may use a subset of
values within the legal range. However, the agent
must guarantee that the new value is not assigned to
any in-use value of hpicfBackupLinkIndex.
A management station creates a new backup link using
this algorithm:
- issue a management protocol retrieval operation
to obtain the value of hpicfBackupLinkNextIndex;
if the retrieved value is zero, a new backup
link cannot be created at this time;
- issue a management protocol set operation for
hpicfBackupLinkNextIndex, supplying the same
value as obtained in the previous step;
- if the set operation succeeds, use the supplied
value as the hpicfBackupLinkIndex of the new
backup link; if the set operation fails, go back
to the first step and obtain a new value for
hpicfBackupLinkNextIndex;
- issue a management protocol set operation to
create an instance of the hpicfBackupLinkStatus
object setting its value to 'createAndGo' or
'createAndWait' (as specified in the description
of the RowStatus textual convention).
Note that the set of hpicfBackupLinkNextIndex and
the instance of hpicfBackupLinkStatus may occur in
the same set operation if desired."
::= { hpicfGRpBackupLinks 1 }
hpicfBackupLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfBackupLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of backup link configuration entries. For
a given backup link, the agent will periodically send
a test packet to the device at the specified address.
If no response is received after a configured number
of test packets are sent, the agent will enable the
backup port and disable the primary port, and will
stop sending periodic test packets. After the agent
has switched to the backup link, the primary port
will need to explicitly be re-enabled via management
action in order to return to using the primary port.
At any time, a management station can examine the
associated instance of the hpicfBackupLinkState
object to determine if the backup port is currently
in use.
The backup link algorithm enables and disables the
backup port by modifying the instance of the
rptrPortAdminStatus object corresponding to that
port. After the backup port has been enabled by the
backup link algorithm, if the primary port is
subsequently enabled via management action, the
backup port will be turned off and the periodic
test packets will resume.
When a row of this table is activated, the backup
port will be disabled, the primary port will be
enabled, and the periodic test packets will be sent.
The time between test packets is configurable using
the associated instance of the
hpicfBackupLinkTestTime object. The number of
failures needed to switch to the backup port is
configurable using the associated instance of the
hpicfBackupLinkConsecFailures object. The backup
link function can be disabled by setting the relevant
instance of the hpicfBackupLinkStatus object to
either 'notInService' or 'destroy'.
Note that the primary port for a backup link must
be mapped to a repeater segment that the agent is
capable of transmitting through. In addition, a
given port cannot be used in more than one active
backup link at the same time."
::= { hpicfGRpBackupLinks 2 }
hpicfBackupLinkEntry OBJECT-TYPE
SYNTAX HpicfBackupLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the table, containing information about a
single backup link."
INDEX { hpicfBackupLinkIndex }
::= { hpicfBackupLinkTable 1 }
HpicfBackupLinkEntry ::=
SEQUENCE {
hpicfBackupLinkIndex Integer32,
hpicfBackupLinkPrimaryGroup Integer32,
hpicfBackupLinkPrimaryPort Integer32,
hpicfBackupLinkBackupGroup Integer32,
hpicfBackupLinkBackupPort Integer32,
hpicfBackupLinkAddress MacAddress,
hpicfBackupLinkTestTime Integer32,
hpicfBackupLinkConsecFailures Integer32,
hpicfBackupLinkState INTEGER,
hpicfBackupLinkFailEventIndex Integer32,
hpicfBackupLinkStatus RowStatus
}
hpicfBackupLinkIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object uniquely identifies this
backup link."
::= { hpicfBackupLinkEntry 1 }
hpicfBackupLinkPrimaryGroup OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The group containing the primary port for this
backup link."
::= { hpicfBackupLinkEntry 2 }
hpicfBackupLinkPrimaryPort OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port number within the group of the primary port
for this backup link."
::= { hpicfBackupLinkEntry 3 }
hpicfBackupLinkBackupGroup OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The group containing the backup port for this
backup link."
::= { hpicfBackupLinkEntry 4 }
hpicfBackupLinkBackupPort OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port number within the group of the backup port
for this backup link."
::= { hpicfBackupLinkEntry 5 }
hpicfBackupLinkAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MAC address of the device to which periodic
test packets are sent in order to determine if the
primary link is operational."
::= { hpicfBackupLinkEntry 6 }
hpicfBackupLinkTestTime OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The frequency, in seconds, between sending periodic
test packets. The test packet response timeout is
fixed at 500ms."
DEFVAL { 1 }
::= { hpicfBackupLinkEntry 7 }
hpicfBackupLinkConsecFailures OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of consecutive test packet failures which
will cause the agent to switch to the backup port
(i.e., backup port turned on, primary port turned
off). A value of one is generally not recommended
and will cause the backup link to be enabled upon
the first failure."
DEFVAL { 2 }
::= { hpicfBackupLinkEntry 8 }
hpicfBackupLinkState OBJECT-TYPE
SYNTAX INTEGER {
notActive(1),
usingPrimary(2),
usingBackup(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of this backup link. One of the
following values:
notActive - backup link not running because
this row has not yet been made
active
usingPrimary - backup link is running and using
the primary port
usingBackup - backup link test has failed; the
primary port has been disabled
and the backup port has been
enabled"
::= { hpicfBackupLinkEntry 9 }
hpicfBackupLinkFailEventIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index of the eventEntry in the RMON MIB that
will be triggered whenever the value of
hpicfBackupLinkState changes from 'usingPrimary' to
'usingBackup'. The eventEntry identified by a
particular value of this index is the same as
identified by the same value of the eventIndex
object. If there is no corresponding entry in the
eventTable, then no association exists. In
particular, if this value is zero, no associated
event will be generated, as zero is not a valid
event index."
::= { hpicfBackupLinkEntry 10 }
hpicfBackupLinkStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this entry. This object may not be
set to 'active' unless the corresponding instance of
hpicfBackupLinkAddress has been set to a valid
unicast address, the corresponding instances of
hpicfBackupLinkPrimaryGroup,
hpicfBackupLinkPrimaryPort,
hpicfBackupLinkBackupGroup, and
hpicfBackupLinkBackupPort have been configured to
refer to two existing ports and that those ports are
not used in any other active backup link
configuration, and the primary port is mapped to a
repeater segment which the agent is capable of
transmitting through."
::= { hpicfBackupLinkEntry 11 }
-- The generic repeater port mapping group
hpGRpPortMapping
OBJECT IDENTIFIER ::= { hpicfGenericRepeater 3 }
hpGRpPMSegmentTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpGRpPMSegmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table for configuring segment-to-repeater mapping
for repeater segments in this managed system."
::= { hpGRpPortMapping 1 }
hpGRpPMSegmentEntry OBJECT-TYPE
SYNTAX HpGRpPMSegmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing mapping
information about a single repeater segment."
INDEX { hpGRpPMSegmentIndex }
::= { hpGRpPMSegmentTable 1 }
HpGRpPMSegmentEntry ::=
SEQUENCE {
hpGRpPMSegmentIndex Integer32,
hpGRpPMCurrentRptrIndex Integer32
}
hpGRpPMSegmentIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of an instance of this object uniquely
identifies a physical repeater segment in this
managed system. The value of an instance of this
object will be equal to the instance of the Entity
MIB's entPhysicalIndex for the entry in the
entPhysicalTable that represents this segment."
::= { hpGRpPMSegmentEntry 1 }
hpGRpPMCurrentRptrIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the repeater that this segment is
currently connected to. Changing this value has the
effect of moving all ports on this segment to a
different repeater. The hpGRpPMSegAllowedRptrTable
should be consulted to determine which repeaters
this segment can be connected to."
::= { hpGRpPMSegmentEntry 3 }
hpGRpPMSegAllowedRptrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpGRpPMSegAllowedRptrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to inform a management
application about which repeaters a physical segment
is able to be connected to. There is one row in this
table for each allowable segment-to-repeater
connection."
::= { hpGRpPortMapping 2 }
hpGRpPMSegAllowedRptrEntry OBJECT-TYPE
SYNTAX HpGRpPMSegAllowedRptrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the table, containing a single allowable
segment-to-repeater connection. The presence of a
row indicates that the segment identified by
hpGRpPMSegmentIndex can be mapped to the repeater
identified by hpGRpPMSegAllowedRptrIndex."
INDEX { hpGRpPMSegmentIndex,
hpGRpPMSegAllowedRptrIndex }
::= { hpGRpPMSegAllowedRptrTable 1 }
HpGRpPMSegAllowedRptrEntry ::=
SEQUENCE {
hpGRpPMSegAllowedRptrIndex Integer32
}
hpGRpPMSegAllowedRptrIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The repeater index that identifies a repeater that
this segment is able to be connected to."
::= { hpGRpPMSegAllowedRptrEntry 1 }
hpGRpPMPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpGRpPMPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table for configuring port-to-repeater mapping
for repeater ports in this managed system."
::= { hpGRpPortMapping 3 }
hpGRpPMPortEntry OBJECT-TYPE
SYNTAX HpGRpPMPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing mapping
information about a single repeater port."
INDEX { hpGRpPMPortGroupIndex, hpGRpPMPortIndex }
::= { hpGRpPMPortTable 1 }
HpGRpPMPortEntry ::=
SEQUENCE {
hpGRpPMPortGroupIndex Integer32,
hpGRpPMPortIndex Integer32,
hpGRpPMPortEntPhysicalIndex Integer32,
hpGRpPMPortCurrentRptrIndex Integer32
}
hpGRpPMPortGroupIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group containing the port for which this entry
contains mapping information."
::= { hpGRpPMPortEntry 1 }
hpGRpPMPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port within the group for which this entry
contains mapping information."
::= { hpGRpPMPortEntry 2 }
hpGRpPMPortEntPhysicalIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates which entry in the Entity
MIB's entPhysicalTable represents this port. The
entPhysicalEntry identified by this value is the
same entry identified by the same value of the
entPhysicalIndex object."
::= { hpGRpPMPortEntry 3 }
hpGRpPMPortCurrentRptrIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The index of the repeater that this port is
currently mapped to. Changing this value has the
effect of moving this port to a different repeater.
The hpGRpPMPortAllowedRptrTable should be consulted
to determine which repeaters this port can be mapped
to. A value of zero indicates that this port is
currently not a member of any repeater."
::= { hpGRpPMPortEntry 4 }
hpGRpPMPortAllowedRptrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpGRpPMPortAllowedRptrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to inform a management
application about which repeaters a logical port is
able to be mapped to. There is one row in this table
for each allowable port to repeater mapping."
::= { hpGRpPortMapping 4 }
hpGRpPMPortAllowedRptrEntry OBJECT-TYPE
SYNTAX HpGRpPMPortAllowedRptrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row in the table, containing a single allowable
port to repeater mapping. The presence of a row
indicates that the port identified by
hpGRpPMPortGroupIndex, hpGRpPMPortIndex can be
mapped to the repeater identified by
hpGRpPMPortAllowedRptrIndex."
INDEX { hpGRpPMPortGroupIndex, hpGRpPMPortIndex,
hpGRpPMPortAllowedRptrIndex }
::= { hpGRpPMPortAllowedRptrTable 1 }
HpGRpPMPortAllowedRptrEntry ::=
SEQUENCE {
hpGRpPMPortAllowedRptrIndex Integer32
}
hpGRpPMPortAllowedRptrIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The repeater index that identifies a repeater that
this port is able to be mapped to."
::= { hpGRpPMPortAllowedRptrEntry 1 }
-- The generic repeater load balancing group
hpGRpLoadBalancing
OBJECT IDENTIFIER ::= { hpicfGenericRepeater 4 }
hpGRpPortMapAutoConfigEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object has the value 'enabled', when a
switch is discovered in the stack, the repeater
ports will be evenly distributed across the repeater
segments if they had not previously been assigned
to segments (in other words, if they are in their
default state). If this object has the value
'disabled', this automatic distribution of ports
will not occur."
::= { hpGRpLoadBalancing 1 }
hpGRpLoadBalanceNow OBJECT-TYPE
SYNTAX INTEGER {
cantUndo(1),
balancing(2),
completed(3),
undoLast(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to 'balancing' will cause the
agent to distribute ports in the stack across the
repeater segments, attempting to balance the
traffic load on each segment. When the agent has
finished the load balancing, it will set the value
of this object to 'completed'. Setting this object
to 'undoLast' will cause the agent to return all of
the ports to the segment they were on before the
last load balancing. This object will have the
value of 'cantUndo' if there has been no load
balancing since the last agent reset or if the last
load balancing has already been undone. This object
can only be set to 'undoLast' when its current value
is 'completed'."
::= { hpGRpLoadBalancing 2 }
hpGRpLastLoadBalanceTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of sysUpTime for
the last time the hpGRPLoadBalanceNow object was
set to 'balancing'. If load balancing has not been
performed since the last agent reset, this object
will have the value 0."
::= { hpGRpLoadBalancing 3 }
-- Objects for configuring internal and external switches
-- for switching between repeater segments in a repeater
-- system.
hpicfGRpSwitchConfig
OBJECT IDENTIFIER ::= { hpicfGenericRepeater 5 }
hpicfGRpSwitchTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfGRpSwitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of switches, both internal and external,
connected to ports in this repeater system.
Typically, internal switches are added by the agent
and cannot be removed by a management operation.
External switches may be added or removed by
management operations using the hpicfGRpSwitchStatus
object."
::= { hpicfGRpSwitchConfig 1 }
hpicfGRpSwitchEntry OBJECT-TYPE
SYNTAX HpicfGRpSwitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, representing a single
attached switch."
INDEX { hpicfGRpSwitchIndex }
::= { hpicfGRpSwitchTable 1 }
HpicfGRpSwitchEntry ::=
SEQUENCE {
hpicfGRpSwitchIndex Integer32,
hpicfGRpSwitchType INTEGER,
hpicfGRpSwitchEntPhysicalIndex Integer32,
hpicfGRpSwitchLinkCount Integer32,
hpicfGRpSwitchStatus RowStatus
}
hpicfGRpSwitchIndex OBJECT-TYPE
SYNTAX Integer32 (1..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index used to uniquely identify this switch."
::= { hpicfGRpSwitchEntry 1 }
hpicfGRpSwitchType OBJECT-TYPE
SYNTAX INTEGER {
internal(1),
external(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether this switch is an
internal switch card or a switch external to the
repeater system. This object will always be equal
to 'external' for rows that are created using
hpicfGRpSwitchStatus. For internal switches, the
type of internal switch can be determined by
examining the relevant instance of the
entPhysicalType object."
::= { hpicfGRpSwitchEntry 2 }
hpicfGRpSwitchEntPhysicalIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For an internal switch, this object is the index
in the entPhysicalTable for the internal switch
card. For an external switch, the value of this
object will be zero."
::= { hpicfGRpSwitchEntry 3 }
hpicfGRpSwitchLinkCount OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of links from this switch's ports to
repeater ports in this repeater system. For internal
switches, this object cannot be modified by a network
management operation. For an external switch, when
this object is set, a number of rows will be added to
the hpicfGRpSwitchLinkTable equal to the value of
this object. The values of hpicfGRpSwitchLinkIndex
will be numbered from 1 to the value of this object.
An instance of this object may not be modified if
the corresponding instance of the
hpicfGRpSwitchStatus object would be equal to
'active' both before and after the modification
attempt."
::= { hpicfGRpSwitchEntry 4 }
hpicfGRpSwitchStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this hpicfGRpSwitchEntry.
An entry may not exist in the active state unless
the associated instance of the
hpicfGRpSwitchLinkCount has been set to a non-zero
value, and all associated instances of the
hpicfGRpSwitchLinkRptrGroup and
hpicfGRpSwitchLinkRptrPort objects have been set to
non-zero values.
If this object is set to 'destroy', all associated
entries in the hpicfGRpSwitchLinkTable shall be
deleted."
::= { hpicfGRpSwitchEntry 5 }
hpicfGRpSwitchLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF HpicfGRpSwitchLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of links to switch ports for both internal
and external switches that are connected to repeater
ports in this repeater system."
::= { hpicfGRpSwitchConfig 2 }
hpicfGRpSwitchLinkEntry OBJECT-TYPE
SYNTAX HpicfGRpSwitchLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, representing a single link
to a switch port."
INDEX { hpicfGRpSwitchIndex,
hpicfGRpSwitchLinkIndex }
::= { hpicfGRpSwitchLinkTable 1 }
HpicfGRpSwitchLinkEntry ::=
SEQUENCE {
hpicfGRpSwitchLinkIndex Integer32,
hpicfGRpSwitchLinkRptrGroup Integer32,
hpicfGRpSwitchLinkRptrPort Integer32,
hpicfGRpSwitchLinkState INTEGER
}
hpicfGRpSwitchLinkIndex OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An identifier that uniquely identifies this switch
link among all of the links associated with this
switch. The values of this object are numbered
consecutively from 1 to the value of the instance
of the hpicfGRpSwitchLinkCount associated with this
switch."
::= { hpicfGRpSwitchLinkEntry 1 }
hpicfGRpSwitchLinkRptrGroup OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The group containing the repeater port to which this
switch link is attached. For internal switches, this
object may not be modified by a network management
operation. For external switches, an instance of
this object will be created with the value of zero.
It must be modified to a non-zero value corresponding
to a known repeater group index before the instance
of the hpicfGRpSwitchStatus object associated with
this switch can be set to 'active'.
An instance of this object may not be modified if
the instance of the hpicfGRpSwitchStatus object
associated with this switch would be equal to
'active' both before and after the modification
attempt."
::= { hpicfGRpSwitchLinkEntry 2 }
hpicfGRpSwitchLinkRptrPort OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The repeater port within the group to which this
switch link is attached. For internal switches, this
object may not be modified by a network management
operation. For external switches, an instance of
this object will be created with the value of zero.
It must be modified to a non-zero value corresponding
to a known repeater port index before the instance
of the hpicfGRpSwitchStatus object associated with
this switch can be set to 'active'.
An instance of this object may not be modified if
the instance of the hpicfGRpSwitchStatus object
associated with this switch would be equal to
'active' both before and after the modification
attempt."
::= { hpicfGRpSwitchLinkEntry 3 }
hpicfGRpSwitchLinkState OBJECT-TYPE
SYNTAX INTEGER {
active(1),
redundant(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether this switch link is
enabled ('active') or disabled ('redundant') due to
one of the following:
- There are more links to this switch than there
are repeater segments.
- The agent detected a switching loop.
- The link is intended as a backup connection for
other links on this switch.
There can only be one active link to the switch from
each repeater segment, otherwise you will have a
switching loop. Therefore, if more than one switch
link is connected to repeater ports on the same
repeater segment, only one of them may have the value
'active'. All of the others must have the value
'redundant."
::= { hpicfGRpSwitchLinkEntry 4 }
hpicfGRpCurrentPrimarySwitch OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hpicfGRpSwitchIndex of the switch that is
currently the primary switch for this stack. The
automatic port-to-segment distribution feature will
make decisions based on which switch is the primary
switch. A value of 0 indicates that there are no
internal switches in the system, and no external
switches have been configured."
::= { hpicfGRpSwitchConfig 3 }
hpicfGRpDesiredPrimarySwitch OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hpicfGRpSwitchIndex of the switch that the
network administrator wants to be the primary switch
for this stack. If the value of this object is zero,
the agent will select the primary switch. Note that
the agent may choose to use a different switch as the
primary switch if it is unable to locate the switch
identified by this object."
::= { hpicfGRpSwitchConfig 4 }
-- Objects for configuring an internal bridge for
-- bridging between repeater segments in a repeater
-- system.
hpicfGRpBridge
OBJECT IDENTIFIER ::= { hpicfGenericRepeater 6 }
hpGRpBridgeAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { hpicfGRpBridge 1 }
-- Generic repeater notifications
hpicfIntrusionTrap NOTIFICATION-TYPE
OBJECTS { hubIntruderGroup, hubIntruderPort,
hubIntruderAddress, hubIntruderType,
hubIntruderTrainingViolation }
STATUS current
DESCRIPTION
"The hpicfIntrusionTrap signifies that a port
security violation has been detected on a port which
has the hubSecPtAlarmEnable flag set to 'enabled'.
or hpSecPtrIntrusionResponse set to 'SendTrap'
or 'SendTrapAndDisablePort'.
hubIntruderGroup identifies the group containing the
port on which this intrusion occurred.
hubIntruderPort identifies the port within the group
on which this intrusion occurred. hubIntruderAddress
contains the souce MAC address of the intruder.
hubIntruderType identifies the type of violation that
occured: address, training, or both. If the
violation is of type 'training', the
hubIntruderTrainingViolation object will indicate
additional information on the type of violation."
::= { hpicfGenRptrTrapsPrefix 1 }
hpicfBackupLinkTrap NOTIFICATION-TYPE
OBJECTS { hpicfBackupLinkState }
STATUS current
DESCRIPTION
"The hpicfBackupLinkTrap signifies that the primary
link for a backup link configuration has failed, and
the agent has switched over to using the backup link.
The instance of the hpicfBackupLinkState for the
backup link configuration that experienced the
primary link failure is included in the trap."
::= { hpicfGenRptrTrapsPrefix 2 }
-- conformance information
hpicfGenRptrConformance
OBJECT IDENTIFIER ::= { hpicfGenRptrMib 1 }
hpicfGenRptrCompliances
OBJECT IDENTIFIER ::= { hpicfGenRptrConformance 1 }
hpicfGenRptrGroups
OBJECT IDENTIFIER ::= { hpicfGenRptrConformance 2 }
-- compliance statements
hpicfHubSecurityCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"********* THIS COMPLIANCE IS DEPRECATED *********
The compliance statement for agents implementing
per-port security in a single-repeater 802.3
repeater system."
MODULE
MANDATORY-GROUPS { hpicfHubSecurityGroup }
::= { hpicfGenRptrCompliances 1 }
hpicfGenRptrBasicCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"********* THIS COMPLIANCE IS DEPRECATED *********
The compliance statement for agents implementing
management for a single repeater."
MODULE
MANDATORY-GROUPS { hpicfGenRptrBasicGroup }
GROUP hpicfGenRptrSecPtGroup
DESCRIPTION
"This group should be implemented for devices
that support per-port security."
GROUP hpicfGenRptrSecNotifyGroup
DESCRIPTION
"This group should be implemented for devices
that support per-port security."
OBJECT hubSecPtPreventEavesdrop
MIN-ACCESS read-only
DESCRIPTION
"100VG hubs implement this object as read-only,
since eavesdrop prevention is controlled by
whether or not a port is allowed to train as
promiscuous."
::= { hpicfGenRptrCompliances 2 }
hpicfGenRptrSecurityCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"********* THIS COMPLIANCE IS DEPRECATED *********
The compliance statement for AdvanceStack 100VG
slaves implementing security."
MODULE
MANDATORY-GROUPS { hpicfGenRptrSecPtGroup,
hpicfGenRptrSecNotifyGroup }
OBJECT hubSecPtPreventEavesdrop
MIN-ACCESS read-only
DESCRIPTION
"100VG hubs implement this object as read-only,
since eavesdrop prevention is controlled by
whether or not a port is allowed to train as
promiscuous."
::= { hpicfGenRptrCompliances 3 }
hpicfGenRptrCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"********* THIS COMPLIANCE IS DEPRECATED *********
The compliance statement for HP managed repeater
systems."
MODULE
MANDATORY-GROUPS { hpicfGenRptrBasicGroup,
hpicfGenRptrInfoGroup }
GROUP hpicfGenRptrSecPtGroup
DESCRIPTION
"This group should be implemented for devices
that support per-port security."
GROUP hpicfGenRptrSecNotifyGroup
DESCRIPTION
"This group should be implemented for devices
that support per-port security."
GROUP hpicfGenRptrBkpLinkGroup
DESCRIPTION
"This group should be implemented for devices
that support backup link functionality."
GROUP hpicfGenRptrBkpLinkNotifyGroup
DESCRIPTION
"This group should be implemented for devices
that support backup link functionality."
GROUP hpicfGenRptrPortMappingGroup
DESCRIPTION
"This group should be implemented for devices
that support moving segments or ports between
logical repeaters."
GROUP hpicfGenRptrLoadBalanceGroup
DESCRIPTION
"This group should be implemented for devices
that have multiple repeater segments and an
internal switch card and that support load
balancing between segments."
OBJECT hubSecPtPreventEavesdrop
MIN-ACCESS read-only
DESCRIPTION
"100VG hubs implement this object as read-only,
since eavesdrop prevention is controlled by
whether or not a port is allowed to train as
promiscuous."
::= { hpicfGenRptrCompliances 4 }
hpicfGenRptrCompliance2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for HP managed repeater
systems."
MODULE
MANDATORY-GROUPS { hpicfGenRptrBasicGroup,
hpicfGenRptrInfoGroup }
GROUP hpicfGenRptrSecPtGroup
DESCRIPTION
"This group should be implemented for devices
that support per-port security."
GROUP hpicfGenRptrSecNotifyGroup
DESCRIPTION
"This group should be implemented for devices
that support per-port security."
GROUP hpicfGenRptrBkpLinkGroup
DESCRIPTION
"This group should be implemented for devices
that support backup link functionality."
GROUP hpicfGenRptrBkpLinkNotifyGroup
DESCRIPTION
"This group should be implemented for devices
that support backup link functionality."
GROUP hpicfGenRptrPortMappingGroup
DESCRIPTION
"This group should be implemented for devices
that support moving segments or ports between
logical repeaters."
GROUP hpicfGenRptrLoadBalanceGroup
DESCRIPTION
"This group should be implemented for devices
that have multiple repeater segments, that can
support internal switch cards and/or
configuration of external switch links, and that
support load balancing between segments."
GROUP hpicfGenRptrSwitchConfigGroup
DESCRIPTION
"This group should be implemented for repeaters
that have multiple repeater segments and support
internal switch cards and/or configuration of
external switch links."
OBJECT hubSecPtPreventEavesdrop
MIN-ACCESS read-only
DESCRIPTION
"100VG hubs implement this object as read-only,
since eavesdrop prevention is controlled by
whether or not a port is allowed to train as
promiscuous."
::= { hpicfGenRptrCompliances 5 }
hpicfGenRptrCompliance3 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for HP managed repeater
systems."
MODULE
MANDATORY-GROUPS { hpicfGenRptrBasicGroup }
GROUP hpicfGenRptrInfoGroup
DESCRIPTION
"This group should be implemented for devices
that support multiple repeater segments
running at the same speed."
GROUP hpicfGenRptrSecPtGroup
DESCRIPTION
"This group should be implemented for devices
that support per-port security."
GROUP hpicfSecPtGroup
DESCRIPTION
"This group should be implemented for devices
that support per-port security with multiple
authorized addresses per port."
GROUP hpicfGenRptrSecNotifyGroup
DESCRIPTION
"This group should be implemented for devices
that support per-port security."
GROUP hpicfGenRptrBkpLinkGroup
DESCRIPTION
"This group should be implemented for devices
that support backup link functionality."
GROUP hpicfGenRptrBkpLinkNotifyGroup
DESCRIPTION
"This group should be implemented for devices
that support backup link functionality."
GROUP hpicfGenRptrPortMappingGroup
DESCRIPTION
"This group should be implemented for devices
that support moving segments or ports between
logical repeaters."
GROUP hpicfGenRptrLoadBalanceGroup
DESCRIPTION
"This group should be implemented for devices
that have multiple repeater segments, that can
support internal switch cards and/or
configuration of external switch links, and that
support load balancing between segments."
GROUP hpicfGenRptrSwitchConfigGroup
DESCRIPTION
"This group should be implemented for repeaters
that have multiple repeater segments and support
internal switch cards and/or configuration of
external switch links."
GROUP hpicfGenRptrBridgeGroup
DESCRIPTION
"This group should be implemented for repeater
systems that have an internal unmanaged bridge."
OBJECT hubSecPtPreventEavesdrop
MIN-ACCESS read-only
DESCRIPTION
"100VG hubs implement this object as read-only,
since eavesdrop prevention is controlled by
whether or not a port is allowed to train as
promiscuous."
::= { hpicfGenRptrCompliances 6 }
hpicfGenRptrMultiSecOnlyCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION "********* THIS COMPLIANCE IS DEPRECATED *********
The compliance statement for non-repeater devices
that implement per-port security with multiple
authorized address per port."
MODULE
MANDATORY-GROUPS { hpicfSecPtGroup }
::= { hpicfGenRptrCompliances 7 }
hpicfGenRptrMultiSecOnlyCompliance2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The updated compliance statement for non-repeater
devices that implement per-port security with multiple
authorized address per port."
MODULE
MANDATORY-GROUPS { hpicfSecPtGroup2 }
::= { hpicfGenRptrCompliances 8 }
-- units of conformance
hpicfHubSecurityGroup OBJECT-GROUP
OBJECTS { hubSecPtGroupIndex,
hubSecPtPortIndex,
hubSecPtSecurityAddress,
hubSecPtAuthorizedAddress,
hubSecPtPreventEavesdrop,
hubSecPtAlarmEnable,
hubSecPtIntrusionFlag,
hubIntruderIndex,
hubIntruderGroup,
hubIntruderPort,
hubIntruderAddress,
hubIntruderTime
}
STATUS deprecated
DESCRIPTION
"********* THIS GROUP IS DEPRECATED *********
A collection of objects for managing per-port
security violations for a managed 802.3 repeater
system."
::= { hpicfGenRptrGroups 1 }
hpicfGenRptrBasicGroup OBJECT-GROUP
OBJECTS { hpGRpSelfHealEnable }
STATUS current
DESCRIPTION
"A collection of objects for basic configuration
of a system containing repeaters."
::= { hpicfGenRptrGroups 2 }
hpicfGenRptrSecPtGroup OBJECT-GROUP
OBJECTS { hubSecPtGroupIndex,
hubSecPtPortIndex,
hubSecPtSecurityAddress,
hubSecPtAuthorizedAddress,
hubSecPtPreventEavesdrop,
hubSecPtAlarmEnable,
hubSecPtIntrusionFlag,
hubIntruderIndex,
hubIntruderGroup,
hubIntruderPort,
hubIntruderAddress,
hubIntruderTime,
hubIntruderType,
hubIntruderTrainingViolation
}
STATUS current
DESCRIPTION
"A collection of objects for managing per-port
security in a managed repeater system."
::= { hpicfGenRptrGroups 3 }
hpicfGenRptrInfoGroup OBJECT-GROUP
OBJECTS { hpGRpRepeaterIfIndex,
hpGRpRepeaterName,
hpGRpRepeaterVlanIndex
}
STATUS current
DESCRIPTION
"A collection of objects providing information
about logical repeaters in a system."
::= { hpicfGenRptrGroups 4 }
hpicfGenRptrBkpLinkGroup OBJECT-GROUP
OBJECTS { hpicfBackupLinkNextIndex,
hpicfBackupLinkPrimaryGroup,
hpicfBackupLinkPrimaryPort,
hpicfBackupLinkBackupGroup,
hpicfBackupLinkBackupPort,
hpicfBackupLinkAddress,
hpicfBackupLinkTestTime,
hpicfBackupLinkConsecFailures,
hpicfBackupLinkState,
hpicfBackupLinkFailEventIndex,
hpicfBackupLinkStatus
}
STATUS current
DESCRIPTION
"A collection of objects for configuring backup
links in a managed repeater system."
::= { hpicfGenRptrGroups 5 }
hpicfGenRptrPortMappingGroup OBJECT-GROUP
OBJECTS { hpGRpPMCurrentRptrIndex,
hpGRpPMSegAllowedRptrIndex,
hpGRpPMPortEntPhysicalIndex,
hpGRpPMPortCurrentRptrIndex,
hpGRpPMPortAllowedRptrIndex,
hpGRpPortMapAutoConfigEnable
}
STATUS current
DESCRIPTION
"A collection of objects for mapping repeater
segments and repeater ports to logical repeaters."
::= { hpicfGenRptrGroups 6 }
hpicfGenRptrLoadBalanceGroup OBJECT-GROUP
OBJECTS { hpGRpLoadBalanceNow,
hpGRpLastLoadBalanceTime
}
STATUS current
DESCRIPTION
"A collection of objects for managing segment
load balancing on multisegment repeaters with
internal switches."
::= { hpicfGenRptrGroups 7 }
hpicfGenRptrSwitchConfigGroup OBJECT-GROUP
OBJECTS { hpicfGRpSwitchType,
hpicfGRpSwitchEntPhysicalIndex,
hpicfGRpSwitchLinkCount,
hpicfGRpSwitchStatus,
hpicfGRpSwitchLinkRptrGroup,
hpicfGRpSwitchLinkRptrPort,
hpicfGRpSwitchLinkState,
hpicfGRpCurrentPrimarySwitch,
hpicfGRpDesiredPrimarySwitch
}
STATUS current
DESCRIPTION
"A collection of Objects for configuring internal and
external switches for switching between repeater
segments in a repeater system."
::= { hpicfGenRptrGroups 8 }
hpicfGenRptrSecNotifyGroup NOTIFICATION-GROUP
NOTIFICATIONS { hpicfIntrusionTrap }
STATUS current
DESCRIPTION
"A collection of notifications used to indicate
per-port security violations."
::= { hpicfGenRptrGroups 9 }
hpicfGenRptrBkpLinkNotifyGroup NOTIFICATION-GROUP
NOTIFICATIONS { hpicfBackupLinkTrap }
STATUS current
DESCRIPTION
"A collection of notifications used to indicate
state changes on a backup link."
::= { hpicfGenRptrGroups 10 }
hpicfSecPtGroup OBJECT-GROUP
OBJECTS { hpSecPtAddressLimit,
hpSecPtLearnMode,
hpSecPtPreventEavesdrop,
hpSecPtAlarmEnable,
hpSecPtIntrusionFlag,
hpSecCfgStatus,
hpSecAuthAddress,
hubIntruderIndex,
hubIntruderGroup,
hubIntruderPort,
hubIntruderAddress,
hubIntruderTime,
hubIntruderType,
hubIntruderTrainingViolation
}
STATUS deprecated
DESCRIPTION
"********* THIS GROUP IS DEPRECATED *********
A collection of objects for managing per-port
security in a managed repeater or switch system."
::= { hpicfGenRptrGroups 11 }
hpicfGenRptrBridgeGroup OBJECT-GROUP
OBJECTS { hpGRpBridgeAdminStatus }
STATUS current
DESCRIPTION
"A collection of objects for basic configuration
of repeater system containing internal bridging."
::= { hpicfGenRptrGroups 12 }
hpicfSecPtGroup2 OBJECT-GROUP
OBJECTS { hpSecPtAddressLimit,
hpSecPtLearnMode,
hpSecPtAlarmEnable,
hpSecPtIntrusionFlag,
hpSecCfgStatus,
hpSecAuthAddress,
hubIntruderIndex,
hubIntruderGroup,
hubIntruderPort,
hubIntruderAddress,
hubIntruderTime,
hubIntruderType,
hubIntruderTrainingViolation
}
STATUS current
DESCRIPTION
"A collection of objects for managing per-port
security in a managed repeater or switch system."
::= { hpicfGenRptrGroups 13 }
END
Reference in New Issue View Git Blame Copy Permalink