mirror of
https://github.com/librenms/librenms.git
synced 2024-10-07 16:52:45 +00:00
53a4e91e8c
git-svn-id: http://www.observium.org/svn/observer/trunk@1645 61d68cd4-352d-0410-923a-c4978735b2b8
2151 lines
86 KiB
Plaintext
2151 lines
86 KiB
Plaintext
-- *****************************************************************
|
|
-- FDDI-SMT73-MIB.my : RFC 1512 FDDI MIB for SMT 7.3
|
|
--
|
|
-- October 31, Chifei Cheng
|
|
--
|
|
-- Copyright (c) 1994-1996 by cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- *****************************************************************
|
|
--
|
|
|
|
FDDI-SMT73-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
Counter
|
|
FROM RFC1155-SMI
|
|
transmission
|
|
FROM RFC1213-MIB
|
|
OBJECT-TYPE
|
|
FROM RFC-1212;
|
|
|
|
-- This MIB module uses the extended OBJECT-TYPE macro as
|
|
-- defined in [7].
|
|
|
|
|
|
-- this is the FDDI MIB module
|
|
|
|
fddi OBJECT IDENTIFIER ::= { transmission 15 }
|
|
fddimib OBJECT IDENTIFIER ::= { fddi 73 }
|
|
|
|
|
|
-- textual conventions
|
|
|
|
FddiTimeNano ::= INTEGER (0..2147483647)
|
|
-- This data type specifies 1 nanosecond units as
|
|
-- an integer value.
|
|
--
|
|
-- NOTE: The encoding is normal integer representation, not
|
|
-- two's complement. Since this type is used for variables
|
|
-- which are encoded as TimerTwosComplement in the ANSI
|
|
-- specification, two operations need to be performed on such
|
|
-- variables to convert from ANSI form to SNMP form:
|
|
--
|
|
-- 1) Convert from two's complement to normal integer
|
|
-- representation
|
|
-- 2) Multiply by 80 to convert from 80 nsec to 1 nsec units
|
|
--
|
|
-- No resolution is lost. Moreover, the objects for which
|
|
-- this data type is used effectively do not lose any range
|
|
-- due to the lower maximum value since they do not require
|
|
-- the full range.
|
|
--
|
|
-- Example: If fddimibMACTReq had a value of 8 ms, it would
|
|
-- be stored in ANSI TimerTwosComplement format as 0xFFFE7960
|
|
-- [8 ms is 100000 in 80 nsec units, which is then converted
|
|
-- to two's complement] but be reported as 8000000 in SNMP
|
|
-- since it is encoded here as FddiTimeNano.
|
|
|
|
|
|
|
|
|
|
|
|
FddiTimeMilli ::= INTEGER (0..2147483647)
|
|
-- This data type is used for some FDDI timers. It specifies
|
|
-- time in 1 millisecond units, in normal integer
|
|
-- representation.
|
|
|
|
FddiResourceId ::= INTEGER (0..65535)
|
|
-- This data type is used to refer to an instance of a MAC,
|
|
-- PORT, or PATH Resource ID. Indexing begins
|
|
-- at 1. Zero is used to indicate the absence of a resource.
|
|
|
|
FddiSMTStationIdType ::= OCTET STRING (SIZE (8))
|
|
-- The unique identifier for the FDDI station. This is a
|
|
-- string of 8 octets, represented as X' yy yy xx xx xx xx
|
|
-- xx xx' with the low order 6 octet (xx) from a unique IEEE
|
|
-- assigned address. The high order two bits of the IEEE
|
|
-- address, the group address bit and the administration bit
|
|
-- (Universal/Local) bit should both be zero. The first two
|
|
-- octets, the yy octets, are implementor-defined.
|
|
--
|
|
-- The representation of the address portion of the station id
|
|
-- is in the IEEE (ANSI/IEEE P802.1A) canonical notation for
|
|
-- 48 bit addresses. The canonical form is a 6-octet string
|
|
-- where the first octet contains the first 8 bits of the
|
|
-- address, with the I/G(Individual/Group) address bit as the
|
|
-- least significant bit and the U/L (Universal/Local) bit
|
|
-- as the next more significant bit, and so on. Note that
|
|
-- addresses in the ANSI FDDI standard SMT frames are
|
|
-- represented in FDDI MAC order.
|
|
|
|
FddiMACLongAddressType ::= OCTET STRING (SIZE (6))
|
|
-- The representation of long MAC addresses as management
|
|
-- values is in the IEEE (ANSI/IEEE P802.1A) canonical
|
|
-- notation for 48 bit addresses. The canonical form is a
|
|
-- 6-octet string where the first octet contains the first 8
|
|
-- bits of the address, with the I/G (Individual/Group)
|
|
-- address bit as the least significant bit and the U/L
|
|
-- (Universal/Local) bit as the next more significant bit,
|
|
-- and so on. Note that the addresses in the SMT frames are
|
|
-- represented in FDDI MAC order.
|
|
|
|
|
|
-- groups in the FDDI MIB module
|
|
|
|
fddimibSMT OBJECT IDENTIFIER ::= { fddimib 1 }
|
|
|
|
fddimibMAC OBJECT IDENTIFIER ::= { fddimib 2 }
|
|
|
|
fddimibMACCounters OBJECT IDENTIFIER ::= { fddimib 3 }
|
|
|
|
|
|
|
|
|
|
|
|
fddimibPATH OBJECT IDENTIFIER ::= { fddimib 4 }
|
|
|
|
fddimibPORT OBJECT IDENTIFIER ::= { fddimib 5 }
|
|
|
|
|
|
-- the SMT group
|
|
-- Implementation of the SMT group is mandatory for all
|
|
-- systems which implement manageable FDDI subsystems.
|
|
|
|
fddimibSMTNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of SMT implementations (regardless of
|
|
their current state) on this network management
|
|
application entity. The value for this variable
|
|
must remain constant at least from one re-
|
|
initialization of the entity's network management
|
|
system to the next re-initialization."
|
|
::= { fddimibSMT 1 }
|
|
|
|
|
|
-- the SMT table
|
|
|
|
fddimibSMTTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FddimibSMTEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of SMT entries. The number of entries
|
|
shall not exceed the value of fddimibSMTNumber."
|
|
::= { fddimibSMT 2 }
|
|
|
|
fddimibSMTEntry OBJECT-TYPE
|
|
SYNTAX FddimibSMTEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An SMT entry containing information common to a
|
|
given SMT."
|
|
INDEX { fddimibSMTIndex }
|
|
::= { fddimibSMTTable 1 }
|
|
|
|
FddimibSMTEntry ::=
|
|
SEQUENCE {
|
|
fddimibSMTIndex
|
|
INTEGER,
|
|
fddimibSMTStationId
|
|
FddiSMTStationIdType,
|
|
fddimibSMTOpVersionId
|
|
INTEGER,
|
|
fddimibSMTHiVersionId
|
|
INTEGER,
|
|
fddimibSMTLoVersionId
|
|
INTEGER,
|
|
fddimibSMTUserData
|
|
OCTET STRING,
|
|
fddimibSMTMIBVersionId
|
|
INTEGER,
|
|
fddimibSMTMACCts
|
|
INTEGER,
|
|
fddimibSMTNonMasterCts
|
|
INTEGER,
|
|
fddimibSMTMasterCts
|
|
INTEGER,
|
|
fddimibSMTAvailablePaths
|
|
INTEGER,
|
|
fddimibSMTConfigCapabilities
|
|
INTEGER,
|
|
fddimibSMTConfigPolicy
|
|
INTEGER,
|
|
fddimibSMTConnectionPolicy
|
|
INTEGER,
|
|
fddimibSMTTNotify
|
|
INTEGER,
|
|
fddimibSMTStatRptPolicy
|
|
INTEGER,
|
|
fddimibSMTTraceMaxExpiration
|
|
FddiTimeMilli,
|
|
fddimibSMTBypassPresent
|
|
INTEGER,
|
|
fddimibSMTECMState
|
|
INTEGER,
|
|
fddimibSMTCFState
|
|
INTEGER,
|
|
fddimibSMTRemoteDisconnectFlag
|
|
INTEGER,
|
|
fddimibSMTStationStatus
|
|
INTEGER,
|
|
fddimibSMTPeerWrapFlag
|
|
INTEGER,
|
|
fddimibSMTTimeStamp
|
|
FddiTimeMilli,
|
|
fddimibSMTTransitionTimeStamp
|
|
FddiTimeMilli,
|
|
fddimibSMTStationAction
|
|
INTEGER
|
|
}
|
|
|
|
fddimibSMTIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for each SMT. The value for each
|
|
SMT must remain constant at least from one re-
|
|
initialization of the entity's network management
|
|
system to the next re-initialization."
|
|
::= { fddimibSMTEntry 1 }
|
|
|
|
fddimibSMTStationId OBJECT-TYPE
|
|
SYNTAX FddiSMTStationIdType -- OCTET STRING (SIZE (8))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Used to uniquely identify an FDDI station."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 11 }"
|
|
::= { fddimibSMTEntry 2 }
|
|
|
|
fddimibSMTOpVersionId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The version that this station is using for its
|
|
operation (refer to ANSI 7.1.2.2). The value of
|
|
this variable is 2 for this SMT revision."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 13 }"
|
|
::= { fddimibSMTEntry 3 }
|
|
|
|
fddimibSMTHiVersionId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The highest version of SMT that this station
|
|
supports (refer to ANSI 7.1.2.2)."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 14 }"
|
|
::= { fddimibSMTEntry 4 }
|
|
|
|
fddimibSMTLoVersionId OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The lowest version of SMT that this station
|
|
supports (refer to ANSI 7.1.2.2)."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 15 }"
|
|
::= { fddimibSMTEntry 5 }
|
|
|
|
fddimibSMTUserData OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (32))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable contains 32 octets of user defined
|
|
information. The information shall be an ASCII
|
|
string."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 17 }"
|
|
::= { fddimibSMTEntry 6 }
|
|
|
|
fddimibSMTMIBVersionId OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The version of the FDDI MIB of this station. The
|
|
value of this variable is 1 for this SMT
|
|
revision."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 18 }"
|
|
::= { fddimibSMTEntry 7 }
|
|
|
|
fddimibSMTMACCts OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of MACs in this station or
|
|
concentrator."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 21 }"
|
|
::= { fddimibSMTEntry 8 }
|
|
|
|
fddimibSMTNonMasterCts OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of this variable is the number of A, B,
|
|
and S ports in this station or concentrator."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 22 }"
|
|
::= { fddimibSMTEntry 9 }
|
|
|
|
fddimibSMTMasterCts OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of M Ports in a node. If the node is
|
|
not a concentrator, the value of the variable is
|
|
zero."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 23 }"
|
|
::= { fddimibSMTEntry 10 }
|
|
|
|
fddimibSMTAvailablePaths OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A value that indicates the PATH types available
|
|
in the station.
|
|
|
|
The value is a sum. This value initially takes
|
|
the value zero, then for each type of PATH that
|
|
this node has available, 2 raised to a power is
|
|
added to the sum. The powers are according to the
|
|
following table:
|
|
|
|
Path Power
|
|
Primary 0
|
|
Secondary 1
|
|
Local 2
|
|
|
|
For example, a station having Primary and Local
|
|
PATHs available would have a value of 5 (2**0 +
|
|
2**2)."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 24 }"
|
|
::= { fddimibSMTEntry 11 }
|
|
|
|
fddimibSMTConfigCapabilities OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A value that indicates the configuration
|
|
capabilities of a node. The 'Hold Available' bit
|
|
indicates the support of the optional Hold
|
|
Function, which is controlled by
|
|
fddiSMTConfigPolicy. The 'CF-Wrap-AB' bit
|
|
indicates that the station has the capability of
|
|
performing a wrap_ab (refer to ANSI SMT 9.7.2.2).
|
|
|
|
The value is a sum. This value initially takes
|
|
the value zero, then for each of the configuration
|
|
policies currently enforced on the node, 2 raised
|
|
to a power is added to the sum. The powers are
|
|
according to the following table:
|
|
|
|
Policy Power
|
|
holdAvailable 0
|
|
CF-Wrap-AB 1 "
|
|
REFERENCE
|
|
"ANSI { fddiSMT 25 }"
|
|
::= { fddimibSMTEntry 12 }
|
|
|
|
fddimibSMTConfigPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A value that indicates the configuration policies
|
|
currently desired in a node. 'Hold' is one of the
|
|
terms used for the Hold Flag, an optional ECM flag
|
|
used to enable the optional Hold policy.
|
|
|
|
The value is a sum. This value initially takes
|
|
the value zero, then for each of the configuration
|
|
policies currently enforced on the node, 2 raised
|
|
to a power is added to the sum. The powers are
|
|
according to the following table:
|
|
|
|
Policy Power
|
|
configurationhold 0 "
|
|
REFERENCE
|
|
"ANSI { fddiSMT 26 }"
|
|
::= { fddimibSMTEntry 13 }
|
|
|
|
fddimibSMTConnectionPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER (32768..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A value representing the connection policies in
|
|
effect in a node. A station sets the corresponding
|
|
bit for each of the connection types that it
|
|
rejects. The letter designations, X and Y, in the
|
|
'rejectX-Y' names have the following significance:
|
|
X represents the PC-Type of the local PORT and Y
|
|
represents the PC_Type of the adjacent PORT
|
|
(PC_Neighbor). The evaluation of Connection-
|
|
Policy (PC-Type, PC-Neighbor) is done to determine
|
|
the setting of T- Val(3) in the PC-Signalling
|
|
sequence (refer to ANSI 9.6.3). Note that Bit 15,
|
|
(rejectM-M), is always set and cannot be cleared.
|
|
|
|
The value is a sum. This value initially takes
|
|
the value zero, then for each of the connection
|
|
policies currently enforced on the node, 2 raised
|
|
to a power is added to the sum. The powers are
|
|
according to the following table:
|
|
|
|
Policy Power
|
|
rejectA-A 0
|
|
rejectA-B 1
|
|
rejectA-S 2
|
|
rejectA-M 3
|
|
rejectB-A 4
|
|
rejectB-B 5
|
|
rejectB-S 6
|
|
rejectB-M 7
|
|
rejectS-A 8
|
|
rejectS-B 9
|
|
rejectS-S 10
|
|
rejectS-M 11
|
|
rejectM-A 12
|
|
rejectM-B 13
|
|
rejectM-S 14
|
|
rejectM-M 15 "
|
|
REFERENCE
|
|
"ANSI { fddiSMT 27 }"
|
|
::= { fddimibSMTEntry 14 }
|
|
|
|
fddimibSMTTNotify OBJECT-TYPE
|
|
SYNTAX INTEGER (2..30)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The timer, expressed in seconds, used in the
|
|
Neighbor Notification protocol. It has a range of
|
|
2 seconds to 30 seconds, and its default value is
|
|
30 seconds (refer to ANSI SMT 8.2)."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 29 }"
|
|
::= { fddimibSMTEntry 15 }
|
|
|
|
fddimibSMTStatRptPolicy OBJECT-TYPE
|
|
SYNTAX INTEGER { true(1), false(2) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"If true, indicates that the node will generate
|
|
Status Reporting Frames for its implemented events
|
|
and conditions. It has an initial value of true.
|
|
This variable determines the value of the
|
|
SR_Enable Flag (refer to ANSI SMT 8.3.2.1)."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 30 }"
|
|
::= { fddimibSMTEntry 16 }
|
|
|
|
fddimibSMTTraceMaxExpiration OBJECT-TYPE
|
|
SYNTAX FddiTimeMilli
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Reference Trace_Max (refer to ANSI SMT
|
|
9.4.4.2.2)."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 31 }"
|
|
::= { fddimibSMTEntry 17 }
|
|
|
|
fddimibSMTBypassPresent OBJECT-TYPE
|
|
SYNTAX INTEGER { true(1), false(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A flag indicating if the station has a bypass on
|
|
its AB port pair."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 34 }"
|
|
::= { fddimibSMTEntry 18 }
|
|
|
|
fddimibSMTECMState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ec0(1), -- Out
|
|
ec1(2), -- In
|
|
ec2(3), -- Trace
|
|
ec3(4), -- Leave
|
|
ec4(5), -- Path_Test
|
|
ec5(6), -- Insert
|
|
ec6(7), -- Check
|
|
ec7(8) -- Deinsert
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current state of the ECM state
|
|
machine (refer to ANSI SMT 9.5.2)."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 41 }"
|
|
::= { fddimibSMTEntry 19 }
|
|
|
|
fddimibSMTCFState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
cf0(1), -- isolated
|
|
cf1(2), -- local_a
|
|
cf2(3), -- local_b
|
|
cf3(4), -- local_ab
|
|
cf4(5), -- local_s
|
|
cf5(6), -- wrap_a
|
|
cf6(7), -- wrap_b
|
|
cf7(8), -- wrap_ab
|
|
cf8(9), -- wrap_s
|
|
cf9(10), -- c_wrap_a
|
|
cf10(11), -- c_wrap_b
|
|
cf11(12), -- c_wrap_s
|
|
cf12(13) -- thru
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The attachment configuration for the station or
|
|
concentrator (refer to ANSI SMT 9.7.2.2)."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 42 }"
|
|
::= { fddimibSMTEntry 20 }
|
|
|
|
fddimibSMTRemoteDisconnectFlag OBJECT-TYPE
|
|
SYNTAX INTEGER { true(1), false(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A flag indicating that the station was remotely
|
|
disconnected from the network as a result of
|
|
receiving an fddiSMTAction, disconnect (refer to
|
|
ANSI SMT 6.4.5.3) in a Parameter Management Frame.
|
|
A station requires a Connect Action to rejoin and
|
|
clear the flag (refer to ANSI SMT 6.4.5.2)."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 44 }"
|
|
::= { fddimibSMTEntry 21 }
|
|
|
|
fddimibSMTStationStatus OBJECT-TYPE
|
|
SYNTAX INTEGER { concatenated(1), separated(2), thru(3) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current status of the primary and secondary
|
|
paths within this station."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 45 }"
|
|
::= { fddimibSMTEntry 22 }
|
|
|
|
fddimibSMTPeerWrapFlag OBJECT-TYPE
|
|
SYNTAX INTEGER { true(1), false(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable assumes the value of the
|
|
PeerWrapFlag in CFM (refer to ANSI SMT
|
|
9.7.2.4.4)."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 46 }"
|
|
::= { fddimibSMTEntry 23 }
|
|
|
|
fddimibSMTTimeStamp OBJECT-TYPE
|
|
SYNTAX FddiTimeMilli
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable assumes the value of TimeStamp
|
|
(refer to ANSI SMT 8.3.2.1)."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 51 }"
|
|
::= { fddimibSMTEntry 24 }
|
|
|
|
fddimibSMTTransitionTimeStamp OBJECT-TYPE
|
|
SYNTAX FddiTimeMilli
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable assumes the value of
|
|
TransitionTimeStamp (refer to ANSI SMT 8.3.2.1)."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 52 }"
|
|
::= { fddimibSMTEntry 25 }
|
|
|
|
fddimibSMTStationAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
connect(2),
|
|
disconnect(3),
|
|
path-Test(4),
|
|
self-Test(5),
|
|
disable-a(6),
|
|
disable-b(7),
|
|
disable-m(8)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object, when read, always returns a value of
|
|
other(1). The behavior of setting this variable
|
|
to each of the acceptable values is as follows:
|
|
|
|
other(1): Results in an appropriate error.
|
|
connect(2): Generates a Connect signal to ECM
|
|
to begin a connection sequence. See ANSI
|
|
Ref 9.4.2.
|
|
disconnect(3): Generates a Disconnect signal
|
|
to ECM. see ANSI Ref 9.4.2.
|
|
path-Test(4): Initiates a station Path_Test.
|
|
The Path_Test variable (see ANSI Ref
|
|
9.4.1) is set to 'Testing'. The results
|
|
of this action are not specified in this
|
|
standard.
|
|
self-Test(5): Initiates a station Self_Test.
|
|
The results of this action are not
|
|
specified in this standard.
|
|
disable-a(6): Causes a PC_Disable on the A
|
|
port if the A port mode is peer.
|
|
disable-b(7): Causes a PC_Disable on the B
|
|
port if the B port mode is peer.
|
|
disable-m(8): Causes a PC_Disable on all M
|
|
ports.
|
|
|
|
Attempts to set this object to all other values
|
|
results in an appropriate error. The result of
|
|
setting this variable to path-Test(4) or self-
|
|
Test(5) is implementation-specific."
|
|
REFERENCE
|
|
"ANSI { fddiSMT 60 }"
|
|
::= { fddimibSMTEntry 26 }
|
|
|
|
|
|
-- the MAC group
|
|
-- Implementation of the MAC Group is mandatory for all
|
|
-- systems which implement manageable FDDI subsystems.
|
|
|
|
fddimibMACNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of MAC implementations (across
|
|
all SMTs) on this network management application
|
|
entity. The value for this variable must remain
|
|
constant at least from one re-initialization of
|
|
the entity's network management system to the next
|
|
re-initialization."
|
|
::= { fddimibMAC 1 }
|
|
|
|
|
|
-- the MAC table
|
|
|
|
fddimibMACTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FddimibMACEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of MAC entries. The number of entries
|
|
shall not exceed the value of fddimibMACNumber."
|
|
::= { fddimibMAC 2 }
|
|
|
|
fddimibMACEntry OBJECT-TYPE
|
|
SYNTAX FddimibMACEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A MAC entry containing information common to a
|
|
given MAC."
|
|
INDEX { fddimibMACSMTIndex, fddimibMACIndex }
|
|
::= { fddimibMACTable 1 }
|
|
|
|
FddimibMACEntry ::=
|
|
SEQUENCE {
|
|
fddimibMACSMTIndex
|
|
INTEGER,
|
|
fddimibMACIndex
|
|
INTEGER,
|
|
fddimibMACIfIndex
|
|
INTEGER,
|
|
fddimibMACFrameStatusFunctions
|
|
INTEGER,
|
|
fddimibMACTMaxCapability
|
|
FddiTimeNano,
|
|
fddimibMACTVXCapability
|
|
FddiTimeNano,
|
|
fddimibMACAvailablePaths
|
|
INTEGER,
|
|
fddimibMACCurrentPath
|
|
INTEGER,
|
|
fddimibMACUpstreamNbr
|
|
FddiMACLongAddressType,
|
|
fddimibMACDownstreamNbr
|
|
FddiMACLongAddressType,
|
|
fddimibMACOldUpstreamNbr
|
|
FddiMACLongAddressType,
|
|
fddimibMACOldDownstreamNbr
|
|
FddiMACLongAddressType,
|
|
fddimibMACDupAddressTest
|
|
INTEGER,
|
|
fddimibMACRequestedPaths
|
|
INTEGER,
|
|
fddimibMACDownstreamPORTType
|
|
INTEGER,
|
|
fddimibMACSMTAddress
|
|
FddiMACLongAddressType,
|
|
fddimibMACTReq
|
|
FddiTimeNano,
|
|
fddimibMACTNeg
|
|
FddiTimeNano,
|
|
fddimibMACTMax
|
|
FddiTimeNano,
|
|
fddimibMACTvxValue
|
|
FddiTimeNano,
|
|
fddimibMACFrameCts
|
|
Counter,
|
|
fddimibMACCopiedCts
|
|
Counter,
|
|
fddimibMACTransmitCts
|
|
Counter,
|
|
fddimibMACErrorCts
|
|
Counter,
|
|
fddimibMACLostCts
|
|
Counter,
|
|
fddimibMACFrameErrorThreshold
|
|
INTEGER,
|
|
fddimibMACFrameErrorRatio
|
|
INTEGER,
|
|
fddimibMACRMTState
|
|
INTEGER,
|
|
fddimibMACDaFlag
|
|
INTEGER,
|
|
fddimibMACUnaDaFlag
|
|
INTEGER,
|
|
fddimibMACFrameErrorFlag
|
|
INTEGER,
|
|
fddimibMACMAUnitdataAvailable
|
|
INTEGER,
|
|
fddimibMACHardwarePresent
|
|
INTEGER,
|
|
fddimibMACMAUnitdataEnable
|
|
INTEGER
|
|
}
|
|
|
|
|
|
fddimibMACSMTIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of the SMT index associated with this
|
|
MAC."
|
|
::= { fddimibMACEntry 1 }
|
|
|
|
fddimibMACIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Index variable for uniquely identifying the MAC
|
|
object instances, which is the same as the
|
|
corresponding resource index in SMT."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 34 }"
|
|
::= { fddimibMACEntry 2 }
|
|
|
|
fddimibMACIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of the MIB-II ifIndex corresponding to
|
|
this MAC. If none is applicable, 0 is returned."
|
|
REFERENCE
|
|
"MIB-II"
|
|
::= { fddimibMACEntry 3 }
|
|
|
|
fddimibMACFrameStatusFunctions OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the MAC's optional Frame Status
|
|
processing functions.
|
|
|
|
The value is a sum. This value initially takes
|
|
the value zero, then for each function present, 2
|
|
raised to a power is added to the sum. The powers
|
|
are according to the following table:
|
|
|
|
function Power
|
|
fs-repeating 0
|
|
fs-setting 1
|
|
fs-clearing 2 "
|
|
REFERENCE
|
|
"ANSI { fddiMAC 11 }"
|
|
::= { fddimibMACEntry 4 }
|
|
|
|
fddimibMACTMaxCapability OBJECT-TYPE
|
|
SYNTAX FddiTimeNano
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the maximum time value of fddiMACTMax
|
|
that this MAC can support."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 13 }"
|
|
::= { fddimibMACEntry 5 }
|
|
|
|
fddimibMACTVXCapability OBJECT-TYPE
|
|
SYNTAX FddiTimeNano
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the maximum time value of
|
|
fddiMACTvxValue that this MAC can support."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 14 }"
|
|
::= { fddimibMACEntry 6 }
|
|
|
|
fddimibMACAvailablePaths OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the paths available for this MAC (refer
|
|
to ANSI SMT 9.7.7).
|
|
|
|
The value is a sum. This value initially takes
|
|
the value zero, then for each type of PATH that
|
|
this MAC has available, 2 raised to a power is
|
|
added to the sum. The powers are according to the
|
|
following table:
|
|
|
|
Path Power
|
|
Primary 0
|
|
Secondary 1
|
|
Local 2 "
|
|
REFERENCE
|
|
"ANSI { fddiMAC 22 }"
|
|
::= { fddimibMACEntry 7 }
|
|
|
|
fddimibMACCurrentPath OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
isolated(1),
|
|
local(2),
|
|
secondary(3),
|
|
primary(4),
|
|
concatenated(5),
|
|
thru(6)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the Path into which this MAC is
|
|
currently inserted (refer to ANSI 9.7.7)."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 23 }"
|
|
::= { fddimibMACEntry 8 }
|
|
|
|
fddimibMACUpstreamNbr OBJECT-TYPE
|
|
SYNTAX FddiMACLongAddressType -- OCTET STRING (SIZE (6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The MAC's upstream neighbor's long individual MAC
|
|
address. It has an initial value of the SMT-
|
|
Unknown-MAC Address and is only modified as
|
|
specified by the Neighbor Information Frame
|
|
protocol (refer to ANSI SMT 7.2.1 and 8.2)."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 24 }"
|
|
::= { fddimibMACEntry 9 }
|
|
|
|
fddimibMACDownstreamNbr OBJECT-TYPE
|
|
SYNTAX FddiMACLongAddressType -- OCTET STRING (SIZE (6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The MAC's downstream neighbor's long individual
|
|
MAC address. It has an initial value of the SMT-
|
|
Unknown-MAC Address and is only modified as
|
|
specified by the Neighbor Information Frame
|
|
protocol (refer to ANSI SMT 7.2.1 and 8.2)."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 25 }"
|
|
::= { fddimibMACEntry 10 }
|
|
|
|
fddimibMACOldUpstreamNbr OBJECT-TYPE
|
|
SYNTAX FddiMACLongAddressType -- OCTET STRING (SIZE (6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The previous value of the MAC's upstream
|
|
neighbor's long individual MAC address. It has an
|
|
initial value of the SMT-Unknown- MAC Address and
|
|
is only modified as specified by the Neighbor
|
|
Information Frame protocol (refer to ANSI SMT
|
|
7.2.1 and 8.2)."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 26 }"
|
|
::= { fddimibMACEntry 11 }
|
|
|
|
fddimibMACOldDownstreamNbr OBJECT-TYPE
|
|
SYNTAX FddiMACLongAddressType -- OCTET STRING (SIZE (6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The previous value of the MAC's downstream
|
|
neighbor's long individual MAC address. It has an
|
|
initial value of the SMT- Unknown-MAC Address and
|
|
is only modified as specified by the Neighbor
|
|
Information Frame protocol (refer to ANSI SMT
|
|
7.2.1 and 8.2)."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 27 }"
|
|
::= { fddimibMACEntry 12 }
|
|
|
|
fddimibMACDupAddressTest OBJECT-TYPE
|
|
SYNTAX INTEGER { none(1), pass(2), fail(3) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The Duplicate Address Test flag, Dup_Addr_Test
|
|
(refer to ANSI 8.2)."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 29 }"
|
|
::= { fddimibMACEntry 13 }
|
|
|
|
fddimibMACRequestedPaths OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"List of permitted Paths which specifies the
|
|
Path(s) into which the MAC may be inserted (refer
|
|
to ansi SMT 9.7).
|
|
|
|
The value is a sum which represents the individual
|
|
paths that are desired. This value initially
|
|
takes the value zero, then for each type of PATH
|
|
that this node is, 2 raised to a power is added to
|
|
the sum. The powers are according to the
|
|
following table:
|
|
|
|
Path Power
|
|
local 0
|
|
secondary-alternate 1
|
|
primary-alternate 2
|
|
concatenated-alternate 3
|
|
secondary-preferred 4
|
|
primary-preferred 5
|
|
concatenated-preferred 6
|
|
thru 7 "
|
|
REFERENCE
|
|
"ANSI { fddiMAC 32 }"
|
|
::= { fddimibMACEntry 14 }
|
|
|
|
fddimibMACDownstreamPORTType OBJECT-TYPE
|
|
SYNTAX INTEGER { a(1), b(2), s(3), m(4), none(5) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the PC-Type of the first port that is
|
|
downstream of this MAC (the exit port)."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 33 }"
|
|
::= { fddimibMACEntry 15 }
|
|
|
|
fddimibMACSMTAddress OBJECT-TYPE
|
|
SYNTAX FddiMACLongAddressType -- OCTET STRING (SIZE (6))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The 48-bit individual address of the MAC used for
|
|
SMT frames."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 41 }"
|
|
::= { fddimibMACEntry 16 }
|
|
|
|
fddimibMACTReq OBJECT-TYPE
|
|
SYNTAX FddiTimeNano
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is the T_Req_value passed to the
|
|
MAC. Without having detected a duplicate, the
|
|
time value of this variable shall assume the
|
|
maximum supported time value which is less than or
|
|
equal to the time value of fddiPATHMaxT-Req. When
|
|
a MAC has an address detected as a duplicate, it
|
|
may use a time value for this variable greater
|
|
than the time value of fddiPATHTMaxLowerBound. A
|
|
station shall cause claim when the new T_Req may
|
|
cause the value of T_Neg to change in the claim
|
|
process, (i.e., time value new T_Req < T_Neg, or
|
|
old T_Req = T_Neg)."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 51 }"
|
|
::= { fddimibMACEntry 17 }
|
|
|
|
fddimibMACTNeg OBJECT-TYPE
|
|
SYNTAX FddiTimeNano
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"It is reported as a FddiTimeNano number."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 52 }"
|
|
::= { fddimibMACEntry 18 }
|
|
|
|
fddimibMACTMax OBJECT-TYPE
|
|
SYNTAX FddiTimeNano
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is the T_Max_value passed to the
|
|
MAC. The time value of this variable shall assume
|
|
the minimum supported time value which is greater
|
|
than or equal to the time value of fddiPATHT-
|
|
MaxLowerBound"
|
|
REFERENCE
|
|
"ANSI { fddiMAC 53 }"
|
|
::= { fddimibMACEntry 19 }
|
|
|
|
fddimibMACTvxValue OBJECT-TYPE
|
|
SYNTAX FddiTimeNano
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is the TVX_value passed to the MAC.
|
|
The time value of this variable shall assume the
|
|
minimum supported time value which is greater than
|
|
or equal to the time value of
|
|
fddiPATHTVXLowerBound."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 54 }"
|
|
::= { fddimibMACEntry 20 }
|
|
|
|
fddimibMACFrameCts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A count of the number of frames received by this
|
|
MAC (refer to ANSI MAC 7.5.1)."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 71 }"
|
|
::= { fddimibMACEntry 21 }
|
|
|
|
fddimibMACCopiedCts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A count that should as closely as possible match
|
|
the number of frames addressed to (A bit set) and
|
|
successfully copied into the station's receive
|
|
buffers (C bit set) by this MAC (refer to ANSI MAC
|
|
7.5). Note that this count does not include MAC
|
|
frames."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 72 }"
|
|
::= { fddimibMACEntry 22 }
|
|
|
|
fddimibMACTransmitCts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A count that should as closely as possible match
|
|
the number of frames transmitted by this MAC
|
|
(refer to ANSI MAC 7.5). Note that this count
|
|
does not include MAC frames."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 73 }"
|
|
::= { fddimibMACEntry 23 }
|
|
|
|
fddimibMACErrorCts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A count of the number of frames that were
|
|
detected in error by this MAC that had not been
|
|
detected in error by another MAC (refer to ANSI
|
|
MAC 7.5.2)."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 81 }"
|
|
::= { fddimibMACEntry 24 }
|
|
|
|
fddimibMACLostCts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A count of the number of instances that this MAC
|
|
detected a format error during frame reception
|
|
such that the frame was stripped (refer to ANSI
|
|
MAC 7.5.3)."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 82 }"
|
|
::= { fddimibMACEntry 25 }
|
|
|
|
fddimibMACFrameErrorThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A threshold for determining when a MAC Condition
|
|
report (see ANSI 8.3.1.1) shall be generated.
|
|
Stations not supporting variable thresholds shall
|
|
have a value of 0 and a range of (0..0)."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 95 }"
|
|
::= { fddimibMACEntry 26 }
|
|
|
|
fddimibMACFrameErrorRatio OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is the value of the ratio,
|
|
|
|
((delta fddiMACLostCts + delta fddiMACErrorCts) /
|
|
(delta fddiMACFrameCts + delta fddiMACLostCts ))
|
|
* 2**16 "
|
|
REFERENCE
|
|
"ANSI { fddiMAC 96 }"
|
|
::= { fddimibMACEntry 27 }
|
|
|
|
fddimibMACRMTState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
rm0(1), -- Isolated
|
|
rm1(2), -- Non_Op
|
|
rm2(3), -- Ring_Op
|
|
rm3(4), -- Detect
|
|
rm4(5), -- Non_Op_Dup
|
|
rm5(6), -- Ring_Op_Dup
|
|
rm6(7), -- Directed
|
|
rm7(8) -- Trace
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the current state of the RMT State
|
|
Machine (refer to ANSI 10.3.2)."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 111 }"
|
|
::= { fddimibMACEntry 28 }
|
|
|
|
fddimibMACDaFlag OBJECT-TYPE
|
|
SYNTAX INTEGER { true(1), false(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The RMT flag Duplicate Address Flag, DA_Flag
|
|
(refer to ANSI 10.2.1.2)."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 112 }"
|
|
::= { fddimibMACEntry 29 }
|
|
|
|
fddimibMACUnaDaFlag OBJECT-TYPE
|
|
SYNTAX INTEGER { true(1), false(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A flag, UNDA_Flag (refer to ANSI 8.2.2.1), set
|
|
when the upstream neighbor reports a duplicate
|
|
address condition. Cleared when the condition
|
|
clears."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 113 }"
|
|
::= { fddimibMACEntry 30 }
|
|
|
|
fddimibMACFrameErrorFlag OBJECT-TYPE
|
|
SYNTAX INTEGER { true(1), false(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the MAC Frame Error Condition is
|
|
present when set. Cleared when the condition
|
|
clears and on station initialization."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 114 }"
|
|
::= { fddimibMACEntry 31 }
|
|
|
|
fddimibMACMAUnitdataAvailable OBJECT-TYPE
|
|
SYNTAX INTEGER { true(1), false(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable shall take on the value of the
|
|
MAC_Avail flag defined in RMT."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 116 }"
|
|
::= { fddimibMACEntry 32 }
|
|
|
|
fddimibMACHardwarePresent OBJECT-TYPE
|
|
SYNTAX INTEGER { true(1), false(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable indicates the presence of
|
|
underlying hardware support for this MAC object.
|
|
If the value of this object is false(2), the
|
|
reporting of the objects in this entry may be
|
|
handled in an implementation-specific manner."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 117 }"
|
|
::= { fddimibMACEntry 33 }
|
|
|
|
fddimibMACMAUnitdataEnable OBJECT-TYPE
|
|
SYNTAX INTEGER { true(1), false(2) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable determines the value of the
|
|
MA_UNITDATA_Enable flag in RMT. The default and
|
|
initial value of this flag is true(1)."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 118 }"
|
|
::= { fddimibMACEntry 34 }
|
|
|
|
|
|
-- the Enhanced MAC Counters group
|
|
-- Implementation of this Group is optional, but systems
|
|
-- claiming support must implement all variables in this
|
|
-- group
|
|
|
|
|
|
-- the MAC Counters table
|
|
|
|
fddimibMACCountersTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FddimibMACCountersEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of MAC Counters entries. The number of
|
|
entries shall not exceed the value of
|
|
fddimibMACNumber."
|
|
::= { fddimibMACCounters 1 }
|
|
|
|
fddimibMACCountersEntry OBJECT-TYPE
|
|
SYNTAX FddimibMACCountersEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A MAC Counters entry containing information
|
|
common to a given MAC."
|
|
INDEX { fddimibMACSMTIndex, fddimibMACIndex }
|
|
::= { fddimibMACCountersTable 1 }
|
|
|
|
FddimibMACCountersEntry ::=
|
|
SEQUENCE {
|
|
fddimibMACTokenCts
|
|
Counter,
|
|
fddimibMACTvxExpiredCts
|
|
Counter,
|
|
fddimibMACNotCopiedCts
|
|
Counter,
|
|
fddimibMACLateCts
|
|
Counter,
|
|
fddimibMACRingOpCts
|
|
Counter,
|
|
fddimibMACNotCopiedRatio
|
|
INTEGER,
|
|
fddimibMACNotCopiedFlag
|
|
INTEGER,
|
|
fddimibMACNotCopiedThreshold
|
|
INTEGER
|
|
}
|
|
|
|
fddimibMACTokenCts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A count that should as closely as possible match
|
|
the number of times the station has received a
|
|
token (total of non-restricted and restricted) on
|
|
this MAC (see ANSI MAC 7.4). This count is
|
|
valuable for determination of network load."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 74 }"
|
|
::= { fddimibMACCountersEntry 1 }
|
|
|
|
fddimibMACTvxExpiredCts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A count that should as closely as possible match
|
|
the number of times that TVX has expired."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 83 }"
|
|
::= { fddimibMACCountersEntry 2 }
|
|
|
|
fddimibMACNotCopiedCts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A count that should as closely as possible match
|
|
the number of frames that were addressed to this
|
|
MAC but were not copied into its receive buffers
|
|
(see ANSI MAC 7.5). For example, this might occur
|
|
due to local buffer congestion. Because of
|
|
implementation considerations, this count may not
|
|
match the actual number of frames not copied. It
|
|
is not a requirement that this count be exact.
|
|
Note that this count does not include MAC frames."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 84 }"
|
|
::= { fddimibMACCountersEntry 3 }
|
|
|
|
fddimibMACLateCts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A count that should as closely as possible match
|
|
the number of TRT expirations since this MAC was
|
|
reset or a token was received (refer to ANSI MAC
|
|
7.4.5)."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 85 }"
|
|
::= { fddimibMACCountersEntry 4 }
|
|
|
|
fddimibMACRingOpCts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The count of the number of times the ring has
|
|
entered the 'Ring_Operational' state from the
|
|
'Ring Not Operational' state. This count is
|
|
updated when a SM_MA_STATUS.Indication of a change
|
|
in the Ring_Operational status occurs (refer to
|
|
ANSI 6.1.4). Because of implementation
|
|
considerations, this count may be less than the
|
|
actual RingOp_Ct. It is not a requirement that
|
|
this count be exact."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 86 }"
|
|
::= { fddimibMACCountersEntry 5 }
|
|
|
|
fddimibMACNotCopiedRatio OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is the value of the ratio:
|
|
|
|
(delta fddiMACNotCopiedCts /
|
|
(delta fddiMACCopiedCts +
|
|
delta fddiMACNotCopiedCts )) * 2**16 "
|
|
REFERENCE
|
|
"ANSI { fddiMAC 105 }"
|
|
::= { fddimibMACCountersEntry 6 }
|
|
|
|
fddimibMACNotCopiedFlag OBJECT-TYPE
|
|
SYNTAX INTEGER { true(1), false(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates that the Not Copied condition is
|
|
present when read as true(1). Set to false(2)
|
|
when the condition clears and on station
|
|
initialization."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 115 }"
|
|
::= { fddimibMACCountersEntry 7 }
|
|
|
|
fddimibMACNotCopiedThreshold OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A threshold for determining when a MAC condition
|
|
report shall be generated. Stations not
|
|
supporting variable thresholds shall have a value
|
|
of 0 and a range of (0..0)."
|
|
REFERENCE
|
|
"ANSI { fddiMAC 103 }"
|
|
::= { fddimibMACCountersEntry 8 }
|
|
|
|
|
|
-- the PATH group
|
|
-- Implementation of the PATH group is mandatory for all
|
|
-- systems which implement manageable FDDI subsystems.
|
|
|
|
fddimibPATHNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of PATHs possible (across all
|
|
SMTs) on this network management application
|
|
entity. The value for this variable must remain
|
|
constant at least from one re-initialization of
|
|
the entity's network management system to the next
|
|
re-initialization."
|
|
::= { fddimibPATH 1 }
|
|
|
|
|
|
-- the PATH table
|
|
|
|
fddimibPATHTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FddimibPATHEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of PATH entries. The number of entries
|
|
shall not exceed the value of fddimibPATHNumber."
|
|
::= { fddimibPATH 2 }
|
|
|
|
fddimibPATHEntry OBJECT-TYPE
|
|
SYNTAX FddimibPATHEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A PATH entry containing information common to a
|
|
given PATH."
|
|
INDEX { fddimibPATHSMTIndex, fddimibPATHIndex }
|
|
::= { fddimibPATHTable 1 }
|
|
|
|
FddimibPATHEntry ::=
|
|
SEQUENCE {
|
|
fddimibPATHSMTIndex
|
|
INTEGER,
|
|
fddimibPATHIndex
|
|
INTEGER,
|
|
fddimibPATHTVXLowerBound
|
|
FddiTimeNano,
|
|
fddimibPATHTMaxLowerBound
|
|
FddiTimeNano,
|
|
fddimibPATHMaxTReq
|
|
FddiTimeNano
|
|
}
|
|
|
|
fddimibPATHSMTIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of the SMT index associated with this
|
|
PATH."
|
|
::= { fddimibPATHEntry 1 }
|
|
|
|
|
|
fddimibPATHIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Index variable for uniquely identifying the
|
|
primary, secondary and local PATH object
|
|
instances. Local PATH object instances are
|
|
represented with integer values 3 to 255."
|
|
REFERENCE
|
|
"ANSI { fddiPATH 11 }"
|
|
::= { fddimibPATHEntry 2 }
|
|
|
|
fddimibPATHTVXLowerBound OBJECT-TYPE
|
|
SYNTAX FddiTimeNano
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the minimum time value of
|
|
fddiMACTvxValue that shall be used by any MAC that
|
|
is configured in this path. The operational value
|
|
of fddiMACTvxValue is managed by setting this
|
|
variable. This variable has the time value range
|
|
of:
|
|
|
|
0 < fddimibPATHTVXLowerBound < fddimibPATHMaxTReq
|
|
Changes to this variable shall either satisfy the
|
|
time value relationship:
|
|
|
|
fddimibPATHTVXLowerBound <=
|
|
fddimibMACTVXCapability
|
|
|
|
of each of the MACs currently on the path, or be
|
|
considered out of range. The initial value of
|
|
fddimibPATHTVXLowerBound shall be 2500 nsec (2.5
|
|
ms)."
|
|
REFERENCE
|
|
"ANSI { fddiPATH 21 }"
|
|
::= { fddimibPATHEntry 3 }
|
|
|
|
fddimibPATHTMaxLowerBound OBJECT-TYPE
|
|
SYNTAX FddiTimeNano
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the minimum time value of fddiMACTMax
|
|
that shall be used by any MAC that is configured
|
|
in this path. The operational value of
|
|
fddiMACTMax is managed by setting this variable.
|
|
This variable has the time value range of:
|
|
|
|
fddimibPATHMaxTReq <= fddimibPATHTMaxLowerBound
|
|
|
|
and an absolute time value range of:
|
|
|
|
10000nsec (10 msec) <= fddimibPATHTMaxLowerBound
|
|
|
|
Changes to this variable shall either satisfy the
|
|
time value relationship:
|
|
|
|
fddimibPATHTMaxLowerBound <
|
|
fddimibMACTMaxCapability
|
|
|
|
of each of the MACs currently on the path, or be
|
|
considered out of range. The initial value of
|
|
fddimibPATHTMaxLowerBound shall be 165000 nsec
|
|
(165 msec)."
|
|
REFERENCE
|
|
"ANSI { fddiPATH 22 }"
|
|
::= { fddimibPATHEntry 4 }
|
|
|
|
fddimibPATHMaxTReq OBJECT-TYPE
|
|
SYNTAX FddiTimeNano
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Specifies the maximum time value of fddiMACT-Req
|
|
that shall be used by any MAC that is configured
|
|
in this path. The operational value of fddiMACT-
|
|
Req is managed by setting this variable. This
|
|
variable has the time value range of:
|
|
|
|
fddimibPATHTVXLowerBound < fddimibPATHMaxTReq <=
|
|
fddimibPATHTMaxLowerBound.
|
|
|
|
The default value of fddimibPATHMaxTReq is 165000
|
|
nsec (165 msec)."
|
|
REFERENCE
|
|
"ANSI { fddiPATH 23 }"
|
|
::= { fddimibPATHEntry 5 }
|
|
|
|
|
|
-- the PATH Configuration table
|
|
|
|
fddimibPATHConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FddimibPATHConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table of Path configuration entries. This
|
|
table lists all the resources that may be in this
|
|
Path."
|
|
REFERENCE
|
|
"ANSI { fddiPATH 18 }"
|
|
::= { fddimibPATH 3 }
|
|
|
|
fddimibPATHConfigEntry OBJECT-TYPE
|
|
SYNTAX FddimibPATHConfigEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A collection of objects containing information
|
|
for a given PATH Configuration entry."
|
|
INDEX { fddimibPATHConfigSMTIndex,
|
|
fddimibPATHConfigPATHIndex,
|
|
fddimibPATHConfigTokenOrder }
|
|
::= { fddimibPATHConfigTable 1 }
|
|
|
|
FddimibPATHConfigEntry ::=
|
|
SEQUENCE {
|
|
fddimibPATHConfigSMTIndex
|
|
INTEGER,
|
|
fddimibPATHConfigPATHIndex
|
|
INTEGER,
|
|
fddimibPATHConfigTokenOrder
|
|
INTEGER,
|
|
fddimibPATHConfigResourceType
|
|
INTEGER,
|
|
fddimibPATHConfigResourceIndex
|
|
INTEGER,
|
|
fddimibPATHConfigCurrentPath
|
|
INTEGER
|
|
}
|
|
|
|
fddimibPATHConfigSMTIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of the SMT index associated with this
|
|
configuration entry."
|
|
::= { fddimibPATHConfigEntry 1 }
|
|
|
|
fddimibPATHConfigPATHIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of the PATH resource index associated
|
|
with this configuration entry."
|
|
::= { fddimibPATHConfigEntry 2 }
|
|
|
|
fddimibPATHConfigTokenOrder OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An object associated with Token order for this
|
|
entry. Thus if the token passes resources a, b, c
|
|
and d, in that order, then the value of this
|
|
object for these resources would be 1, 2, 3 and 4
|
|
respectively."
|
|
::= { fddimibPATHConfigEntry 3 }
|
|
|
|
fddimibPATHConfigResourceType OBJECT-TYPE
|
|
SYNTAX INTEGER { mac(2), port(4) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of resource associated with this
|
|
configuration entry."
|
|
::= { fddimibPATHConfigEntry 4 }
|
|
|
|
fddimibPATHConfigResourceIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of the SMT resource index used to refer
|
|
to the instance of this MAC or Port resource."
|
|
::= { fddimibPATHConfigEntry 5 }
|
|
|
|
fddimibPATHConfigCurrentPath OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
isolated(1), local(2), secondary(3), primary(4),
|
|
concatenated(5), thru(6)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current insertion status for this resource on
|
|
this Path."
|
|
::= { fddimibPATHConfigEntry 6 }
|
|
|
|
|
|
-- the PORT group
|
|
-- Implementation of the PORT group is mandatory for all
|
|
-- systems which implement manageable FDDI subsystems.
|
|
|
|
fddimibPORTNumber OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of PORT implementations (across
|
|
all SMTs) on this network management application
|
|
entity. The value for this variable must remain
|
|
constant at least from one re-initialization of
|
|
the entity's network management system to the next
|
|
re-initialization."
|
|
::= { fddimibPORT 1 }
|
|
|
|
|
|
-- the PORT table
|
|
|
|
fddimibPORTTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FddimibPORTEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of PORT entries. The number of entries
|
|
shall not exceed the value of fddimibPORTNumber."
|
|
::= { fddimibPORT 2 }
|
|
|
|
fddimibPORTEntry OBJECT-TYPE
|
|
SYNTAX FddimibPORTEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A PORT entry containing information common to a
|
|
given PORT."
|
|
INDEX { fddimibPORTSMTIndex, fddimibPORTIndex }
|
|
::= { fddimibPORTTable 1 }
|
|
|
|
FddimibPORTEntry ::=
|
|
SEQUENCE {
|
|
fddimibPORTSMTIndex
|
|
INTEGER,
|
|
fddimibPORTIndex
|
|
INTEGER,
|
|
fddimibPORTMyType
|
|
INTEGER,
|
|
fddimibPORTNeighborType
|
|
INTEGER,
|
|
fddimibPORTConnectionPolicies
|
|
INTEGER,
|
|
fddimibPORTMACIndicated
|
|
INTEGER,
|
|
fddimibPORTCurrentPath
|
|
INTEGER,
|
|
fddimibPORTRequestedPaths
|
|
OCTET STRING,
|
|
fddimibPORTMACPlacement
|
|
FddiResourceId,
|
|
fddimibPORTAvailablePaths
|
|
INTEGER,
|
|
fddimibPORTPMDClass
|
|
INTEGER,
|
|
fddimibPORTConnectionCapabilities
|
|
INTEGER,
|
|
fddimibPORTBSFlag
|
|
INTEGER,
|
|
fddimibPORTLCTFailCts
|
|
Counter,
|
|
fddimibPORTLerEstimate
|
|
INTEGER,
|
|
fddimibPORTLemRejectCts
|
|
Counter,
|
|
fddimibPORTLemCts
|
|
Counter,
|
|
fddimibPORTLerCutoff
|
|
INTEGER,
|
|
fddimibPORTLerAlarm
|
|
INTEGER,
|
|
fddimibPORTConnectState
|
|
INTEGER,
|
|
fddimibPORTPCMState
|
|
INTEGER,
|
|
fddimibPORTPCWithhold
|
|
INTEGER,
|
|
fddimibPORTLerFlag
|
|
INTEGER,
|
|
fddimibPORTHardwarePresent
|
|
INTEGER,
|
|
fddimibPORTAction
|
|
INTEGER
|
|
}
|
|
|
|
fddimibPORTSMTIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of the SMT index associated with this
|
|
PORT."
|
|
::= { fddimibPORTEntry 1 }
|
|
|
|
fddimibPORTIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (1..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for each PORT within a given SMT,
|
|
which is the same as the corresponding resource
|
|
index in SMT. The value for each PORT must remain
|
|
constant at least from one re-initialization of
|
|
the entity's network management system to the next
|
|
re-initialization."
|
|
REFERENCE
|
|
"ANSI { fddiPORT 29 }"
|
|
::= { fddimibPORTEntry 2 }
|
|
|
|
fddimibPORTMyType OBJECT-TYPE
|
|
SYNTAX INTEGER { a(1), b(2), s(3), m(4), none(5) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of the PORT's PC_Type (refer to ANSI
|
|
9.4.1, and 9.6.3.2)."
|
|
REFERENCE
|
|
"ANSI { fddiPORT 12 }"
|
|
::= { fddimibPORTEntry 3 }
|
|
|
|
fddimibPORTNeighborType OBJECT-TYPE
|
|
SYNTAX INTEGER { a(1), b(2), s(3), m(4), none(5) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of the remote PORT as determined in PCM.
|
|
This variable has an initial value of none, and is
|
|
only modified in PC_RCode(3)_Actions (refer to
|
|
ANSI SMT 9.6.3.2)."
|
|
REFERENCE
|
|
"ANSI { fddiPORT 13 }"
|
|
::= { fddimibPORTEntry 4 }
|
|
|
|
fddimibPORTConnectionPolicies OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A value representing the PORT's connection
|
|
policies desired in the node. The value of pc-
|
|
mac-lct is a term used in the PC_MAC_LCT Flag (see
|
|
9.4.3.2). The value of pc-mac-loop is a term used
|
|
in the PC_MAC_Loop Flag.
|
|
|
|
The value is a sum. This value initially takes
|
|
the value zero, then for each PORT policy, 2
|
|
raised to a power is added to the sum. The powers
|
|
are according to the following table:
|
|
|
|
Policy Power
|
|
pc-mac-lct 0
|
|
pc-mac-loop 1 "
|
|
REFERENCE
|
|
"ANSI { fddiPORT 14 }"
|
|
::= { fddimibPORTEntry 5 }
|
|
|
|
fddimibPORTMACIndicated OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tVal9FalseRVal9False(1),
|
|
tVal9FalseRVal9True(2),
|
|
tVal9TrueRVal9False(3),
|
|
tVal9TrueRVal9True(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The indications (T_Val(9), R_Val(9)) in PC-
|
|
Signalling, of the intent to place a MAC in the
|
|
output token path to a PORT (refer to ANSI SMT
|
|
9.6.3.2.)."
|
|
REFERENCE
|
|
"ANSI { fddiPORT 15 }"
|
|
::= { fddimibPORTEntry 6 }
|
|
|
|
fddimibPORTCurrentPath OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
ce0(1), -- isolated
|
|
ce1(2), -- local
|
|
ce2(3), -- secondary
|
|
ce3(4), -- primary
|
|
ce4(5), -- concatenated
|
|
ce5(6) -- thru
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the Path(s) into which this PORT is
|
|
currently inserted."
|
|
REFERENCE
|
|
"ANSI { fddiPORT 16 }"
|
|
::= { fddimibPORTEntry 7 }
|
|
|
|
fddimibPORTRequestedPaths OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (3))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable is a list of permitted Paths where
|
|
each list element defines the Port's permitted
|
|
Paths. The first octet corresponds to 'none', the
|
|
second octet to 'tree', and the third octet to
|
|
'peer'."
|
|
REFERENCE
|
|
"ANSI { fddiPORT 17 }"
|
|
::= { fddimibPORTEntry 8 }
|
|
|
|
fddimibPORTMACPlacement OBJECT-TYPE
|
|
SYNTAX FddiResourceId -- INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the MAC, if any, whose transmit path
|
|
exits the station via this PORT. The value shall
|
|
be zero if there is no MAC associated with the
|
|
PORT. Otherwise, the MACIndex of the MAC will be
|
|
the value of the variable."
|
|
REFERENCE
|
|
"ANSI { fddiPORT 18 }"
|
|
::= { fddimibPORTEntry 9 }
|
|
|
|
fddimibPORTAvailablePaths OBJECT-TYPE
|
|
SYNTAX INTEGER (0..7)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates the Paths which are available to this
|
|
Port. In the absence of faults, the A and B Ports
|
|
will always have both the Primary and Secondary
|
|
Paths available.
|
|
|
|
The value is a sum. This value initially takes
|
|
the value zero, then for each type of PATH that
|
|
this port has available, 2 raised to a power is
|
|
added to the sum. The powers are according to the
|
|
following table:
|
|
|
|
Path Power
|
|
Primary 0
|
|
Secondary 1
|
|
Local 2 "
|
|
REFERENCE
|
|
"ANSI { fddiPORT 19 }"
|
|
::= { fddimibPORTEntry 10 }
|
|
|
|
fddimibPORTPMDClass OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
multimode(1),
|
|
single-mode1(2),
|
|
single-mode2(3),
|
|
sonet(4),
|
|
low-cost-fiber(5),
|
|
twisted-pair(6),
|
|
unknown(7),
|
|
unspecified(8)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable indicates the type of PMD entity
|
|
associated with this port."
|
|
REFERENCE
|
|
"ANSI { fddiPORT 22 }"
|
|
::= { fddimibPORTEntry 11 }
|
|
|
|
fddimibPORTConnectionCapabilities OBJECT-TYPE
|
|
SYNTAX INTEGER (0..3)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A value that indicates the connection
|
|
capabilities of the port. The pc-mac-lct bit
|
|
indicates that the station has the capability of
|
|
setting the PC_MAC_LCT Flag. The pc-mac-loop bit
|
|
indicates that the station has the capability of
|
|
setting the PC_MAC_Loop Flag (refer to ANSI
|
|
9.4.3.2).
|
|
|
|
The value is a sum. This value initially takes
|
|
the value zero, then for each capability that this
|
|
port has, 2 raised to a power is added to the sum.
|
|
The powers are according to the following table:
|
|
|
|
capability Power
|
|
pc-mac-lct 0
|
|
pc-mac-loop 1 "
|
|
REFERENCE
|
|
"ANSI { fddiPORT 23 }"
|
|
::= { fddimibPORTEntry 12 }
|
|
|
|
fddimibPORTBSFlag OBJECT-TYPE
|
|
SYNTAX INTEGER { true(1), false(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable assumes the value of the BS_Flag
|
|
(refer to ANSI SMT 9.4.3.3)."
|
|
REFERENCE
|
|
"ANSI { fddiPORT 33 }"
|
|
::= { fddimibPORTEntry 13 }
|
|
|
|
fddimibPORTLCTFailCts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The count of the consecutive times the link
|
|
confidence test (LCT) has failed during connection
|
|
management (refer to ANSI 9.4.1)."
|
|
REFERENCE
|
|
"ANSI { fddiPORT 42 }"
|
|
::= { fddimibPORTEntry 14 }
|
|
|
|
fddimibPORTLerEstimate OBJECT-TYPE
|
|
SYNTAX INTEGER (4..15)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A long term average link error rate. It ranges
|
|
from 10**-4 to 10**-15 and is reported as the
|
|
absolute value of the base 10 logarithm (refer to
|
|
ANSI SMT 9.4.7.5.)."
|
|
REFERENCE
|
|
"ANSI { fddiPORT 51 }"
|
|
::= { fddimibPORTEntry 15 }
|
|
|
|
fddimibPORTLemRejectCts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A link error monitoring count of the times that a
|
|
link has been rejected."
|
|
REFERENCE
|
|
"ANSI { fddiPORT 52 }"
|
|
::= { fddimibPORTEntry 16 }
|
|
|
|
fddimibPORTLemCts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The aggregate link error monitor error count, set
|
|
to zero only on station initialization."
|
|
REFERENCE
|
|
"ANSI { fddiPORT 53 }"
|
|
::= { fddimibPORTEntry 17 }
|
|
|
|
fddimibPORTLerCutoff OBJECT-TYPE
|
|
SYNTAX INTEGER (4..15)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The link error rate estimate at which a link
|
|
connection will be broken. It ranges from 10**-4
|
|
to 10**-15 and is reported as the absolute value
|
|
of the base 10 logarithm (default of 7)."
|
|
REFERENCE
|
|
"ANSI { fddiPORT 58 }"
|
|
::= { fddimibPORTEntry 18 }
|
|
|
|
fddimibPORTLerAlarm OBJECT-TYPE
|
|
SYNTAX INTEGER (4..15)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The link error rate estimate at which a link
|
|
connection will generate an alarm. It ranges from
|
|
10**-4 to 10**-15 and is reported as the absolute
|
|
value of the base 10 logarithm of the estimate
|
|
(default of 8)."
|
|
REFERENCE
|
|
"ANSI { fddiPORT 59 }"
|
|
::= { fddimibPORTEntry 19 }
|
|
|
|
fddimibPORTConnectState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disabled(1),
|
|
connecting(2),
|
|
standby(3),
|
|
active(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An indication of the connect state of this PORT
|
|
and is equal to the value of Connect_State (refer
|
|
to ANSI 9.4.1)"
|
|
REFERENCE
|
|
"ANSI { fddiPORT 61 }"
|
|
::= { fddimibPORTEntry 20 }
|
|
|
|
fddimibPORTPCMState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
pc0(1), -- Off
|
|
pc1(2), -- Break
|
|
pc2(3), -- Trace
|
|
pc3(4), -- Connect
|
|
pc4(5), -- Next
|
|
pc5(6), -- Signal
|
|
pc6(7), -- Join
|
|
pc7(8), -- Verify
|
|
pc8(9), -- Active
|
|
pc9(10) -- Maint
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The state of this Port's PCM state machine refer
|
|
to ANSI SMT 9.6.2)."
|
|
REFERENCE
|
|
"ANSI { fddiPORT 62 }"
|
|
::= { fddimibPORTEntry 21 }
|
|
|
|
fddimibPORTPCWithhold OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
m-m(2),
|
|
otherincompatible(3),
|
|
pathnotavailable(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of PC_Withhold (refer to ANSI SMT
|
|
9.4.1)."
|
|
REFERENCE
|
|
"ANSI { fddiPORT 63 }"
|
|
::= { fddimibPORTEntry 22 }
|
|
|
|
fddimibPORTLerFlag OBJECT-TYPE
|
|
SYNTAX INTEGER { true(1), false(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The condition becomes active when the value of
|
|
fddiPORTLerEstimate is less than or equal to
|
|
fddiPORTLerAlarm. This will be reported with the
|
|
Status Report Frames (SRF) (refer to ANSI SMT
|
|
7.2.7 and 8.3)."
|
|
REFERENCE
|
|
"ANSI { fddiPORT 64 }"
|
|
::= { fddimibPORTEntry 23 }
|
|
|
|
fddimibPORTHardwarePresent OBJECT-TYPE
|
|
SYNTAX INTEGER { true(1), false(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This variable indicates the presence of
|
|
underlying hardware support for this Port object.
|
|
If the value of this object is false(2), the
|
|
reporting of the objects in this entry may be
|
|
handled in an implementation-specific manner."
|
|
REFERENCE
|
|
"ANSI { fddiPORT 65 }"
|
|
::= { fddimibPORTEntry 24 }
|
|
|
|
fddimibPORTAction OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
maintPORT(2),
|
|
enablePORT(3),
|
|
disablePORT(4),
|
|
startPORT(5),
|
|
stopPORT(6)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Causes a Control signal to be generated with a
|
|
control_action of 'Signal' and the 'variable'
|
|
parameter set with the appropriate value (i.e.,
|
|
PC_Maint, PC_Enable, PC_Disable, PC_Start, or
|
|
PC_Stop) (refer to ANSI 9.4.2)."
|
|
REFERENCE
|
|
"ANSI { fddiPORT 70 }"
|
|
::= { fddimibPORTEntry 25 }
|
|
|
|
|
|
END
|